diff options
Diffstat (limited to 'pvr-source/eurasiacon/build/linux2/config/core.mk')
-rwxr-xr-x | pvr-source/eurasiacon/build/linux2/config/core.mk | 604 |
1 files changed, 0 insertions, 604 deletions
diff --git a/pvr-source/eurasiacon/build/linux2/config/core.mk b/pvr-source/eurasiacon/build/linux2/config/core.mk deleted file mode 100755 index 247d1e1..0000000 --- a/pvr-source/eurasiacon/build/linux2/config/core.mk +++ /dev/null @@ -1,604 +0,0 @@ -########################################################################### ### -#@Title Root build configuration. -#@Copyright Copyright (c) Imagination Technologies Ltd. All Rights Reserved -#@License Dual MIT/GPLv2 -# -# The contents of this file are subject to the MIT license as set out below. -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to deal -# in the Software without restriction, including without limitation the rights -# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -# copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# Alternatively, the contents of this file may be used under the terms of -# the GNU General Public License Version 2 ("GPL") in which case the provisions -# of GPL are applicable instead of those above. -# -# If you wish to allow use of your version of this file only under the terms of -# GPL, and not to allow others to use your version of this file under the terms -# of the MIT license, indicate your decision by deleting the provisions above -# and replace them with the notice and other provisions required by GPL as set -# out in the file called "GPL-COPYING" included in this distribution. If you do -# not delete the provisions above, a recipient may use your version of this file -# under the terms of either the MIT license or GPL. -# -# This License is also included in this distribution in the file called -# "MIT-COPYING". -# -# EXCEPT AS OTHERWISE STATED IN A NEGOTIATED AGREEMENT: (A) THE SOFTWARE IS -# PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING -# BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR -# PURPOSE AND NONINFRINGEMENT; AND (B) IN NO EVENT SHALL THE AUTHORS OR -# COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER -# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN -# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -### ########################################################################### - -# Configuration wrapper for new build system. This file deals with -# configuration of the build. Add to this file anything that deals -# with switching driver options on/off and altering the defines or -# objects the build uses. -# -# At the end of this file is an exhaustive list of all variables -# that are passed between the platform/config stage and the generic -# build. PLEASE refrain from adding more variables than necessary -# to this stage -- almost all options can go through config.h. -# - -################################# MACROS #################################### - -# Write out a kernel GNU make option. -# -define KernelConfigMake -$$(shell echo "override $(1) := $(2)" >>$(CONFIG_KERNEL_MK).new) -endef - -# Write out a GNU make option for both user & kernel -# -define BothConfigMake -$$(eval $$(call KernelConfigMake,$(1),$(2))) -endef - -# Conditionally write out a kernel GNU make option -# -define TunableKernelConfigMake -ifneq ($$($(1)),) -ifneq ($$($(1)),0) -$$(eval $$(call KernelConfigMake,$(1),$$($(1)))) -endif -else -ifneq ($(2),) -$$(eval $$(call KernelConfigMake,$(1),$(2))) -endif -endif -endef - -# Conditionally write out a GNU make option for both user & kernel -# -define TunableBothConfigMake -$$(eval $$(call TunableKernelConfigMake,$(1),$(2))) -endef - -# Write out a kernel-only option -# -define KernelConfigC -$$(shell echo "#define $(1) $(2)" >>$(CONFIG_KERNEL_H).new) -endef - -# Write out an option for both user & kernel -# -define BothConfigC -$$(eval $$(call KernelConfigC,$(1),$(2))) -endef - -# Conditionally write out a kernel-only option -# -define TunableKernelConfigC -ifneq ($$($(1)),) -ifneq ($$($(1)),0) -ifeq ($$($(1)),1) -$$(eval $$(call KernelConfigC,$(1),)) -else -$$(eval $$(call KernelConfigC,$(1),$$($(1)))) -endif -endif -else -ifneq ($(2),) -ifeq ($(2),1) -$$(eval $$(call KernelConfigC,$(1),)) -else -$$(eval $$(call KernelConfigC,$(1),$(2))) -endif -endif -endif -endef - -# Conditionally write out an option for both user & kernel -# -define TunableBothConfigC -$$(eval $$(call TunableKernelConfigC,$(1),$(2))) -endef - -############################### END MACROS ################################## - -# Check we have a new enough version of GNU make. -# -need := 3.81 -ifeq ($(filter $(need),$(firstword $(sort $(MAKE_VERSION) $(need)))),) -$(error A version of GNU make >= $(need) is required - this is version $(MAKE_VERSION)) -endif - -# Try to guess EURASIAROOT if it wasn't set. Check this location. -# -_GUESSED_EURASIAROOT := $(abspath ../../../..) -ifneq ($(strip $(EURASIAROOT)),) -# We don't want to warn about EURASIAROOT if it's empty: this might mean that -# it's not set at all anywhere, but it could also mean that it's set like -# "export EURASIAROOT=" or "make EURASIAROOT= sometarget". If it is set but -# empty, we'll act as if it's unset and not warn. -ifneq ($(strip $(EURASIAROOT)),$(_GUESSED_EURASIAROOT)) -nothing := -space := $(nothing) $(nothing) -$(warning EURASIAROOT is set (via: $(origin EURASIAROOT)), but its value does not) -$(warning match the root of this source tree, so it is being ignored) -$(warning EURASIAROOT is set to: $(EURASIAROOT)) -$(warning $(space)The detected root is: $(_GUESSED_EURASIAROOT)) -$(warning To suppress this message, unset EURASIAROOT or set it empty) -endif -# else, EURASIAROOT matched the actual root of the source tree: don't warn -endif -override EURASIAROOT := $(_GUESSED_EURASIAROOT) -TOP := $(EURASIAROOT) - -ifneq ($(words $(TOP)),1) -$(warning This source tree is located in a path which contains whitespace,) -$(warning which is not supported.) -$(warning $(space)The root is: $(TOP)) -$(error Whitespace found in $$(TOP)) -endif - -$(call directory-must-exist,$(TOP)) - -include ../defs.mk - -# Infer PVR_BUILD_DIR from the directory configuration is launched from. -# Check anyway that such a directory exists. -# -PVR_BUILD_DIR := $(notdir $(abspath .)) -$(call directory-must-exist,$(TOP)/eurasiacon/build/linux2/$(PVR_BUILD_DIR)) - -# Output directory for configuration, object code, -# final programs/libraries, and install/rc scripts. -# -BUILD ?= release -# TI: Added SGX type to binary build location so builds for different GPUs -# with the same build directory are put in different places -OUT ?= $(TOP)/eurasiacon/binary2_$(SGXCORE)_$(SGX_CORE_REV)_$(PVR_BUILD_DIR)_$(BUILD) -override OUT := $(if $(filter /%,$(OUT)),$(OUT),$(TOP)/$(OUT)) - -CONFIG_MK := $(OUT)/config.mk -CONFIG_H := $(OUT)/config.h -CONFIG_KERNEL_MK := $(OUT)/config_kernel.mk -CONFIG_KERNEL_H := $(OUT)/config_kernel.h - -# Create the OUT directory and delete any previous intermediary files -# -$(shell mkdir -p $(OUT)) -$(shell \ - for file in $(CONFIG_MK).new $(CONFIG_H).new \ - $(CONFIG_KERNEL_MK).new $(CONFIG_KERNEL_H).new; do \ - rm -f $$file; \ - done) - -# Some targets don't need information about any modules. If we only specify -# these targets on the make command line, set INTERNAL_CLOBBER_ONLY to -# indicate that toplevel.mk shouldn't read any makefiles -CLOBBER_ONLY_TARGETS := clean clobber help install -INTERNAL_CLOBBER_ONLY := -ifneq ($(strip $(MAKECMDGOALS)),) -INTERNAL_CLOBBER_ONLY := \ -$(if \ - $(strip $(foreach _cmdgoal,$(MAKECMDGOALS),\ - $(if $(filter $(_cmdgoal),$(CLOBBER_ONLY_TARGETS)),,x))),,true) -endif - -# For a clobber-only build, we shouldn't regenerate any config files, or -# require things like SGXCORE to be set -ifneq ($(INTERNAL_CLOBBER_ONLY),true) - --include ../config/user-defs.mk - -# FIXME: Backwards compatibility remaps. -# -ifeq ($(SUPPORT_SLC),1) -SGX_FEATURE_SYSTEM_CACHE := 1 -endif -ifeq ($(BYPASS_SLC),1) -SGX_BYPASS_SYSTEM_CACHE := 1 -endif -ifeq ($(BYPASS_DCU),1) -SGX_BYPASS_DCU := 1 -endif -ifneq ($(SGXCOREREV),) -SGX_CORE_REV := $(SGXCOREREV) -endif - -# Core handling -# -ifeq ($(SGXCORE),) -$(error Must specify SGXCORE) -endif -ifeq ($(SGX_CORE_REV),) -override USE_SGX_CORE_REV_HEAD := 1 -else ifeq ($(SGX_CORE_REV),000) -override USE_SGX_CORE_REV_HEAD := 1 -override SGX_CORE_REV := -else -override USE_SGX_CORE_REV_HEAD := 0 -endif - -# Enforced dependencies. Move this to an include. -# -ifeq ($(SUPPORT_LINUX_USING_WORKQUEUES),1) -override PVR_LINUX_USING_WORKQUEUES := 1 -override PVR_LINUX_MISR_USING_PRIVATE_WORKQUEUE := 1 -override PVR_LINUX_TIMERS_USING_WORKQUEUES := 1 -override SYS_CUSTOM_POWERLOCK_WRAP := 1 -else ifeq ($(SUPPORT_LINUX_USING_SHARED_WORKQUEUES),1) -override PVR_LINUX_USING_WORKQUEUES := 1 -override PVR_LINUX_MISR_USING_WORKQUEUE := 1 -override PVR_LINUX_TIMERS_USING_SHARED_WORKQUEUE := 1 -override SYS_CUSTOM_POWERLOCK_WRAP := 1 -endif - -ifneq ($(PDUMP),1) -override SUPPORT_PDUMP_MULTI_PROCESS := 0 -endif - -ifeq ($(SUPPORT_HYBRID_PB),1) -override SUPPORT_SHARED_PB := 1 -override SUPPORT_PERCONTEXT_PB := 1 -else ifeq ($(SUPPORT_PERCONTEXT_PB),1) -override SUPPORT_SHARED_PB := 0 -endif - -ifeq ($(NO_HARDWARE),1) -override SYS_USING_INTERRUPTS := 0 -override SUPPORT_HW_RECOVERY := 0 -override SUPPORT_ACTIVE_POWER_MANAGEMENT := 0 -endif - -# We're bumping against USSE limits on older cores because the ukernel -# is too large when building both SGX_DISABLE_VISTEST_SUPPORT=0 and -# PVRSRV_USSE_EDM_STATUS_DEBUG=1. -# -# Automatically disable vistest support if debugging the ukernel to -# prevent build failures. -# -ifneq ($(filter 520 530 531 535 540,$(SGXCORE)),) -ifneq ($(SGX_DISABLE_VISTEST_SUPPORT),1) -SGX_DISABLE_VISTEST_SUPPORT ?= not-overridden -ifeq ($(SGX_DISABLE_VISTEST_SUPPORT),not-overridden) -$(warning Setting SGX_DISABLE_VISTEST_SUPPORT=1 because PVRSRV_USSE_EDM_STATUS_DEBUG=1) -SGX_DISABLE_VISTEST_SUPPORT := 1 -endif -endif -endif - -ifeq ($(SGXCORE),535) -ifeq ($(PVRSRV_USSE_EDM_STATUS_DEBUG),1) -SUPPORT_SGX_HWPERF ?= not-overridden -ifeq ($(SUPPORT_SGX_HWPERF),not-overridden) -$(warning Setting SUPPORT_SGX_HWPERF=0 because PVRSRV_USSE_EDM_STATUS_DEBUG=1) -SUPPORT_SGX_HWPERF := 0 -endif -endif -PVR2D_ALT_2DHW ?= 0 -endif - -# Multi-core handling must be done separately to other options -# Also do some sanity checks -# -ifeq ($(SGX_FEATURE_MP),1) -ifeq ($(SGX_FEATURE_MP_CORE_COUNT),) -ifeq ($(SGX_FEATURE_MP_CORE_COUNT_TA),) -$(error Must specify SGX_FEATURE_MP_CORE_COUNT or both SGX_FEATURE_MP_CORE_COUNT_TA and SGX_FEATURE_MP_CORE_COUNT_3D with SGX_FEATURE_MP) -else -$(eval $(call BothConfigC,SGX_FEATURE_MP_CORE_COUNT_TA,$(SGX_FEATURE_MP_CORE_COUNT_TA))) -endif -ifeq ($(SGX_FEATURE_MP_CORE_COUNT_3D),) -$(error Must specify SGX_FEATURE_MP_CORE_COUNT or both SGX_FEATURE_MP_CORE_COUNT_TA and SGX_FEATURE_MP_CORE_COUNT_3D with SGX_FEATURE_MP) -else -$(eval $(call BothConfigC,SGX_FEATURE_MP_CORE_COUNT_3D,$(SGX_FEATURE_MP_CORE_COUNT_3D))) -endif -else -$(eval $(call BothConfigC,SGX_FEATURE_MP_CORE_COUNT,$(SGX_FEATURE_MP_CORE_COUNT))) -endif -endif - -# Rather than requiring the user to have to define two variables (one quoted, -# one not), make PVRSRV_MODNAME a non-tunable and give it an overridable -# default here. -# -PVRSRV_MODNAME ?= pvrsrvkm - -# The user didn't set CROSS_COMPILE. There's probably nothing wrong -# with that, but we'll let them know anyway. -# -ifeq ($(CROSS_COMPILE),) -$(warning CROSS_COMPILE is not set. Target components will be built with the host compiler) -endif - -# The user is trying to set one of the old SUPPORT_ options on the -# command line or in the environment. This isn't supported any more -# and will often break the build. The user is generally only trying -# to remove a component from the list of targets to build, so we'll -# point them at the new way of doing this. -define sanity-check-support-option-origin -ifeq ($$(filter undefined file,$$(origin $(1))),) -$$(warning *** Setting $(1) via $$(origin $(1)) is deprecated) -$$(error If you are trying to disable a component, use e.g. EXCLUDED_APIS="opengles1 opengl") -endif -endef -$(foreach _o,SYS_CFLAGS SYS_CXXFLAGS SYS_EXE_LDFLAGS SYS_LIB_LDFLAGS SUPPORT_EWS SUPPORT_OPENGLES1 SUPPORT_OPENGLES2 SUPPORT_OPENVG SUPPORT_OPENCL SUPPORT_OPENGL SUPPORT_UNITTESTS SUPPORT_XORG,$(eval $(call sanity-check-support-option-origin,$(_o)))) - -# Check for words in EXCLUDED_APIS that aren't understood by the -# common/apis/*.mk files. This should be kept in sync with all the tests on -# EXCLUDED_APIS in those files -_excludable_apis := opencl opengl opengles1 opengles2 openvg ews unittests xorg xorg_unittests scripts -_unrecognised := $(strip $(filter-out $(_excludable_apis),$(EXCLUDED_APIS))) -ifneq ($(_unrecognised),) -$(warning *** Unrecognised entries in EXCLUDED_APIS: $(_unrecognised)) -$(warning *** EXCLUDED_APIS was set via: $(origin EXCLUDED_APIS)) -$(error Excludable APIs are: $(_excludable_apis)) -endif - -# Build's selected list of components -# --include components.mk - -# PDUMP needs extra components -# -ifeq ($(PDUMP),1) -ifneq ($(COMPONENTS),) -COMPONENTS += pdump -endif -ifeq ($(SUPPORT_DRI_DRM),1) -EXTRA_PVRSRVKM_COMPONENTS += dbgdrv -else -KERNEL_COMPONENTS += dbgdrv -endif -endif - -ifeq ($(SUPPORT_PVR_REMOTE),1) -ifneq ($(filter pvr2d,$(COMPONENTS)),) -COMPONENTS += null_pvr2d_remote -endif -COMPONENTS += pvrvncsrv -endif - -# If KERNELDIR is set, write it out to the config.mk, with -# KERNEL_COMPONENTS and KERNEL_ID -# -ifneq ($(strip $(KERNELDIR)),) -include ../kernel_version.mk -PVRSRV_MODULE_BASEDIR ?= /lib/modules/$(KERNEL_ID)/extra/ -$(eval $(call KernelConfigMake,KERNELDIR,$(KERNELDIR))) -# Needed only by install script -$(eval $(call KernelConfigMake,KERNEL_COMPONENTS,$(KERNEL_COMPONENTS))) -$(eval $(call TunableKernelConfigMake,EXTRA_PVRSRVKM_COMPONENTS,)) -$(eval $(call TunableKernelConfigMake,EXTRA_KBUILD_SOURCE,)) - -# If KERNEL_CROSS_COMPILE is set to "undef", this is magically -# equivalent to being unset. If it is unset, we use CROSS_COMPILE -# (which might also be unset). If it is set, use it directly. -ifneq ($(KERNEL_CROSS_COMPILE),undef) -KERNEL_CROSS_COMPILE ?= $(CROSS_COMPILE) -$(eval $(call TunableBothConfigMake,KERNEL_CROSS_COMPILE,)) -endif - -# Check the KERNELDIR has a kernel built and also check that it is -# not 64-bit, which we do not support. -VMLINUX := $(strip $(wildcard $(KERNELDIR)/vmlinux)) -ifneq ($(VMLINUX),) -VMLINUX_IS_64BIT := $(shell file $(VMLINUX) | grep -q 64-bit || echo false) -ifneq ($(VMLINUX_IS_64BIT),false) -$(warning $$(KERNELDIR)/vmlinux is 64-bit, which is not supported. Kbuild may fail.) -endif -else -$(warning $$(KERNELDIR)/vmlinux does not exist. Kbuild may fail.) -endif -endif - - -# Ideally configured by platform Makefiles, as necessary -# - -# Invariant options for Linux -# -$(eval $(call BothConfigC,LINUX,)) - -$(eval $(call BothConfigC,PVR_BUILD_DIR,"\"$(PVR_BUILD_DIR)\"")) -$(eval $(call BothConfigC,PVR_BUILD_TYPE,"\"$(BUILD)\"")) -$(eval $(call BothConfigC,PVRSRV_MODNAME,"\"$(PVRSRV_MODNAME)\"")) - -$(eval $(call TunableBothConfigC,SGXCORE,)) -$(eval $(call BothConfigC,SGX$(SGXCORE),)) -$(eval $(call BothConfigC,SUPPORT_SGX$(SGXCORE),)) - -$(eval $(call TunableBothConfigC,SUPPORT_SGX,1)) -$(eval $(call TunableBothConfigC,SGX_CORE_REV,)) -$(eval $(call TunableBothConfigC,USE_SGX_CORE_REV_HEAD,)) - -$(eval $(call BothConfigC,TRANSFER_QUEUE,)) -$(eval $(call BothConfigC,PVR_SECURE_HANDLES,)) - -ifneq ($(DISPLAY_CONTROLLER),) -$(eval $(call BothConfigC,DISPLAY_CONTROLLER,$(DISPLAY_CONTROLLER))) -endif - -PVR_LINUX_MEM_AREA_POOL_MAX_PAGES ?= 0 -ifneq ($(PVR_LINUX_MEM_AREA_POOL_MAX_PAGES),0) -PVR_LINUX_MEM_AREA_USE_VMAP ?= 1 -include ../kernel_version.mk -ifeq ($(call kernel-version-at-least,3,0),true) -PVR_LINUX_MEM_AREA_POOL_ALLOW_SHRINK ?= 1 -endif -endif -$(eval $(call KernelConfigC,PVR_LINUX_MEM_AREA_POOL_MAX_PAGES,$(PVR_LINUX_MEM_AREA_POOL_MAX_PAGES))) -$(eval $(call TunableKernelConfigC,PVR_LINUX_MEM_AREA_USE_VMAP,)) -$(eval $(call TunableKernelConfigC,PVR_LINUX_MEM_AREA_POOL_ALLOW_SHRINK,)) - - -$(eval $(call BothConfigMake,PVR_SYSTEM,$(PVR_SYSTEM))) - - -# Build-type dependent options -# -$(eval $(call BothConfigMake,BUILD,$(BUILD))) - -ifeq ($(BUILD),debug) -$(eval $(call BothConfigC,DEBUG,)) -$(eval $(call KernelConfigC,DEBUG_LINUX_MEMORY_ALLOCATIONS,)) -$(eval $(call KernelConfigC,DEBUG_LINUX_MEM_AREAS,)) -$(eval $(call KernelConfigC,DEBUG_LINUX_MMAP_AREAS,)) -$(eval $(call KernelConfigC,DEBUG_BRIDGE_KM,)) -else ifeq ($(BUILD),release) -$(eval $(call BothConfigC,RELEASE,)) -$(eval $(call TunableBothConfigMake,DEBUGLINK,1)) -else ifeq ($(BUILD),timing) -$(eval $(call BothConfigC,TIMING,)) -$(eval $(call TunableBothConfigMake,DEBUGLINK,1)) -else -$(error BUILD= must be either debug, release or timing) -endif - -# User-configurable options -# -$(eval $(call TunableBothConfigC,SUPPORT_PERCONTEXT_PB,1)) -$(eval $(call TunableBothConfigC,SUPPORT_SHARED_PB,)) -$(eval $(call TunableBothConfigC,SUPPORT_HYBRID_PB,)) -$(eval $(call TunableBothConfigC,SUPPORT_HW_RECOVERY,1)) -$(eval $(call TunableBothConfigC,SUPPORT_ACTIVE_POWER_MANAGEMENT,1)) -$(eval $(call TunableBothConfigC,SUPPORT_SGX_HWPERF,1)) -$(eval $(call TunableBothConfigC,SUPPORT_SGX_LOW_LATENCY_SCHEDULING,1)) -$(eval $(call TunableBothConfigC,SUPPORT_MEMINFO_IDS,)) -$(eval $(call TunableBothConfigC,SUPPORT_SGX_NEW_STATUS_VALS,1)) -$(eval $(call TunableBothConfigC,SUPPORT_PDUMP_MULTI_PROCESS,)) -$(eval $(call TunableBothConfigC,SUPPORT_DBGDRV_EVENT_OBJECTS,1)) -$(eval $(call TunableBothConfigC,SGX_FEATURE_SYSTEM_CACHE,)) -$(eval $(call TunableBothConfigC,SGX_BYPASS_SYSTEM_CACHE,)) -$(eval $(call TunableBothConfigC,SGX_BYPASS_DCU,)) -$(eval $(call TunableBothConfigC,SGX_FAST_DPM_INIT,)) -$(eval $(call TunableBothConfigC,SGX_FEATURE_MP,)) -$(eval $(call TunableBothConfigC,SGX_FEATURE_MP_PLUS,)) -$(eval $(call TunableBothConfigC,FPGA,)) -$(eval $(call TunableBothConfigC,PDUMP,)) -$(eval $(call TunableBothConfigC,NO_HARDWARE,)) -$(eval $(call TunableBothConfigC,PDUMP_DEBUG_OUTFILES,)) -$(eval $(call TunableBothConfigC,PVRSRV_USSE_EDM_STATUS_DEBUG,)) -$(eval $(call TunableBothConfigC,SGX_DISABLE_VISTEST_SUPPORT,)) -$(eval $(call TunableBothConfigC,PVRSRV_RESET_ON_HWTIMEOUT,)) -$(eval $(call TunableBothConfigC,SYS_USING_INTERRUPTS,1)) -$(eval $(call TunableBothConfigC,SUPPORT_EXTERNAL_SYSTEM_CACHE,)) -$(eval $(call TunableBothConfigC,PVRSRV_NEW_PVR_DPF,)) -$(eval $(call TunableBothConfigC,PVRSRV_NEED_PVR_DPF,)) -$(eval $(call TunableBothConfigC,PVRSRV_NEED_PVR_ASSERT,)) -$(eval $(call TunableBothConfigC,PVRSRV_NEED_PVR_TRACE,)) -$(eval $(call TunableBothConfigC,SUPPORT_SECURE_33657_FIX,)) -$(eval $(call TunableBothConfigC,SUPPORT_ION,)) -$(eval $(call TunableBothConfigC,SUPPORT_HWRECOVERY_TRACE_LIMIT,)) -$(eval $(call TunableBothConfigC,SUPPORT_PVRSRV_GET_DC_SYSTEM_BUFFER,1)) -$(eval $(call TunableBothConfigC,SUPPORT_NV12_FROM_2_HWADDRS,)) - -$(eval $(call TunableKernelConfigC,SUPPORT_LINUX_X86_WRITECOMBINE,1)) -$(eval $(call TunableKernelConfigC,SUPPORT_LINUX_X86_PAT,1)) -$(eval $(call TunableKernelConfigC,SGX_DYNAMIC_TIMING_INFO,)) -$(eval $(call TunableKernelConfigC,SYS_SGX_ACTIVE_POWER_LATENCY_MS,)) -$(eval $(call TunableKernelConfigC,SYS_CUSTOM_POWERLOCK_WRAP,)) -$(eval $(call TunableKernelConfigC,PVR_LINUX_USING_WORKQUEUES,)) -$(eval $(call TunableKernelConfigC,PVR_LINUX_MISR_USING_WORKQUEUE,)) -$(eval $(call TunableKernelConfigC,PVR_LINUX_MISR_USING_PRIVATE_WORKQUEUE,)) -$(eval $(call TunableKernelConfigC,PVR_LINUX_TIMERS_USING_WORKQUEUES,)) -$(eval $(call TunableKernelConfigC,PVR_LINUX_TIMERS_USING_SHARED_WORKQUEUE,)) -$(eval $(call TunableKernelConfigC,LDM_PLATFORM,)) -$(eval $(call TunableKernelConfigC,PVR_LDM_PLATFORM_PRE_REGISTERED,)) -$(eval $(call TunableKernelConfigC,PVR_LDM_PLATFORM_PRE_REGISTERED_DEV,)) -$(eval $(call TunableKernelConfigC,PVR_LDM_DRIVER_REGISTRATION_NAME,"\"$(PVRSRV_MODNAME)\"")) -$(eval $(call TunableKernelConfigC,LDM_PCI,)) -$(eval $(call TunableKernelConfigC,PVRSRV_DUMP_MK_TRACE,)) -$(eval $(call TunableKernelConfigC,PVRSRV_DUMP_KERNEL_CCB,)) -$(eval $(call TunableKernelConfigC,PVRSRV_REFCOUNT_DEBUG,)) -$(eval $(call TunableKernelConfigC,PVRSRV_MMU_MAKE_READWRITE_ON_DEMAND,)) -$(eval $(call TunableKernelConfigC,HYBRID_SHARED_PB_SIZE,)) -$(eval $(call TunableKernelConfigC,SUPPORT_LARGE_GENERAL_HEAP,)) -$(eval $(call TunableKernelConfigC,TTRACE,)) - -ifeq ($(BUILD),debug) -$(eval $(call TunableKernelConfigC,CONFIG_PVR_PROC_FS,1)) -else -$(eval $(call TunableKernelConfigC,CONFIG_PVR_PROC_FS,)) -endif - -$(eval $(call TunableKernelConfigC,CONFIG_PVR_PROC_FS_HEAP_ALLOC_DEBUG,)) - -$(eval $(call TunableBothConfigMake,SUPPORT_ION,)) - - -$(eval $(call TunableBothConfigMake,OPTIM,)) - - -$(eval $(call TunableKernelConfigMake,TTRACE,)) - -endif # INTERNAL_CLOBBER_ONLY - -export INTERNAL_CLOBBER_ONLY -export TOP -export OUT - -MAKE_ETC := -Rr --no-print-directory -C $(TOP) TOP=$(TOP) OUT=$(OUT) \ - -f eurasiacon/build/linux2/toplevel.mk - -# This must match the default value of MAKECMDGOALS below, and the default -# goal in toplevel.mk -.DEFAULT_GOAL := build - -ifeq ($(MAKECMDGOALS),) -MAKECMDGOALS := build -else -# We can't pass autogen to toplevel.mk -MAKECMDGOALS := $(filter-out autogen,$(MAKECMDGOALS)) -endif - -.PHONY: autogen -autogen: -ifeq ($(INTERNAL_CLOBBER_ONLY),) - @$(MAKE) -s --no-print-directory -C $(EURASIAROOT) \ - -f eurasiacon/build/linux2/prepare_tree.mk \ - LDM_PCI=$(LDM_PCI) LDM_PLATFORM=$(LDM_PLATFORM) -else - @: -endif - -# This deletes built-in suffix rules. Otherwise the submake isn't run when -# saying e.g. "make thingy.a" -.SUFFIXES: - -# Because we have a match-anything rule below, we'll run the main build when -# we're actually trying to remake various makefiles after they're read in. -# These rules try to prevent that -%.mk: ; -Makefile%: ; -Makefile: ; - -.PHONY: build kbuild install -build kbuild install: autogen - @$(if $(MAKECMDGOALS),$(MAKE) $(MAKE_ETC) $(MAKECMDGOALS) $(eval MAKECMDGOALS :=),:) - -%: autogen - @$(if $(MAKECMDGOALS),$(MAKE) $(MAKE_ETC) $(MAKECMDGOALS) $(eval MAKECMDGOALS :=),:) |