added new btif_hl (HDP profile) module

Change-Id: Ie9b2b926c67f0b1b57b70d626050ec41d628b509

1 files changed, 334 insertions, 0 deletions

diff --git a/btif/include/btif_hl.h b/btif/include/btif_hl.h
new file mode 100755
index 0000000..2328609
--- /dev/null
+++ b/btif/include/btif_hl.h
@@ -0,0 +1,334 @@
+/************************************************************************************
+ *
+ *  Copyright (C) 2009-2012 Broadcom Corporation
+ *
+ *  This program is the proprietary software of Broadcom Corporation and/or its
+ *  licensors, and may only be used, duplicated, modified or distributed
+ *  pursuant to the terms and conditions of a separate, written license
+ *  agreement executed between you and Broadcom (an "Authorized License").
+ *  Except as set forth in an Authorized License, Broadcom grants no license
+ *  (express or implied), right to use, or waiver of any kind with respect to
+ *  the Software, and Broadcom expressly reserves all rights in and to the
+ *  Software and all intellectual property rights therein.
+ *  IF YOU HAVE NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS
+ *  SOFTWARE IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE
+ *  ALL USE OF THE SOFTWARE.
+ *
+ *  Except as expressly set forth in the Authorized License,
+ *
+ *  1.     This program, including its structure, sequence and organization,
+ *         constitutes the valuable trade secrets of Broadcom, and you shall
+ *         use all reasonable efforts to protect the confidentiality thereof,
+ *         and to use this information only in connection with your use of
+ *         Broadcom integrated circuit products.
+ *
+ *  2.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED
+ *         "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES,
+ *         REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
+ *         OR OTHERWISE, WITH RESPECT TO THE SOFTWARE.  BROADCOM SPECIFICALLY
+ *         DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY,
+ *         NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES,
+ *         ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
+ *         CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING OUT
+ *         OF USE OR PERFORMANCE OF THE SOFTWARE.
+ *
+ *  3.     TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL BROADCOM OR
+ *         ITS LICENSORS BE LIABLE FOR
+ *         (i)   CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY
+ *               DAMAGES WHATSOEVER ARISING OUT OF OR IN ANY WAY RELATING TO
+ *               YOUR USE OF OR INABILITY TO USE THE SOFTWARE EVEN IF BROADCOM
+ *               HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES; OR
+ *         (ii)  ANY AMOUNT IN EXCESS OF THE AMOUNT ACTUALLY PAID FOR THE
+ *               SOFTWARE ITSELF OR U.S. $1, WHICHEVER IS GREATER. THESE
+ *               LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF
+ *               ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ *
+ *  Filename:      btif_hl.h
+ *
+ *  Description:
+ *
+ ***********************************************************************************/
+
+#ifndef BTIF_HL_H
+#define BTIF_HL_H
+
+/************************************************************************************
+**  Functions
+************************************************************************************/
+
+
+#define BTIF_HL_DATA_TYPE_NONE               0x0000
+#define BTIF_HL_DATA_TYPE_PULSE_OXIMETER     0x1004   /* from BT assigned number */
+#define BTIF_HL_DATA_TYPE_BLOOD_PRESSURE_MON 0x1007
+#define BTIF_HL_DATA_TYPE_BODY_THERMOMETER   0x1008
+#define BTIF_HL_DATA_TYPE_BODY_WEIGHT_SCALE  0x100F
+#define BTIF_HL_DATA_TYPE_GLUCOSE_METER      0x1011
+#define BTIF_HL_DATA_TYPE_STEP_COUNTER       0x1068
+
+#define BTIF_HL_CCH_NUM_FILTER_ELEMS            3
+#define BTIF_HL_APPLICATION_NAME_LEN          512
+
+
+typedef enum
+{
+    BTIF_HL_SOC_STATE_IDLE,
+    BTIF_HL_SOC_STATE_W4_ADD,
+    BTIF_HL_SOC_STATE_W4_CONN,
+    BTIF_HL_SOC_STATE_W4_READ,
+    BTIF_HL_SOC_STATE_W4_REL
+} btif_hl_soc_state_t;
+
+typedef struct
+{
+    int                   channel_id;
+    BD_ADDR           bd_addr;
+    UINT8                 mdep_cfg_idx;
+    int                   max_s;
+    int                   socket_id[2];
+    UINT8                 app_idx;
+    UINT8                 mcl_idx;
+    UINT8                 mdl_idx;
+    btif_hl_soc_state_t   state;
+}btif_hl_soc_cb_t;
+
+typedef struct
+{
+    UINT16              data_type;
+    UINT16              max_tx_apdu_size;
+    UINT16              max_rx_apdu_size;
+} btif_hl_data_type_cfg_t;
+
+typedef enum
+{
+    BTIF_HL_STATE_DISABLED,
+    BTIF_HL_STATE_DISABLING,
+    BTIF_HL_STATE_ENABLED,
+    BTIF_HL_STATE_ENABLING,
+
+}btif_hl_state_t;
+
+typedef enum
+{
+    BTIF_HL_CCH_OP_NONE,
+    BTIF_HL_CCH_OP_MDEP_FILTERING,
+    BTIF_HL_CCH_OP_MATCHED_CTRL_PSM,
+    BTIF_HL_CCH_OP_DCH_OPEN,
+    BTIF_HL_CCH_OP_DCH_RECONNECT,
+    BTIF_HL_CCH_OP_DCH_ECHO_TEST
+}btif_hl_cch_op_t;
+
+typedef enum
+{
+    BTIF_HL_PEND_DCH_OP_NONE,
+    BTIF_HL_PEND_DCH_OP_DELETE_MDL,
+    BTIF_HL_PEND_DCH_OP_OPEN,
+    BTIF_HL_PEND_DCH_OP_RECONNECT
+} btif_hl_pend_dch_op_t;
+
+typedef enum
+{
+    BTIF_HL_DCH_OP_NONE,
+    BTIF_HL_DCH_OP_DISC
+} btif_hl_dch_op_t;
+
+
+typedef struct
+{
+    UINT16                  data_type;
+    tBTA_HL_MDEP_ROLE       peer_mdep_role;
+} btif_hl_filter_elem_t;
+
+
+typedef struct
+{
+    UINT8                       num_elems;
+    btif_hl_filter_elem_t       elem[BTIF_HL_CCH_NUM_FILTER_ELEMS];
+} btif_hl_cch_filter_t;
+
+typedef struct
+{
+    BOOLEAN                 in_use;
+    UINT16                  mdl_id;
+    tBTA_HL_MDL_HANDLE      mdl_handle;
+    btif_hl_dch_op_t        dch_oper;
+    tBTA_HL_MDEP_ID         local_mdep_id;
+    UINT8                   local_mdep_cfg_idx;
+    tBTA_HL_DCH_CFG         local_cfg;
+    tBTA_HL_MDEP_ID         peer_mdep_id;
+    UINT16                  peer_data_type;
+    tBTA_HL_MDEP_ROLE       peer_mdep_role;
+    tBTA_HL_DCH_MODE        dch_mode;
+    tBTA_SEC                sec_mask;
+    BOOLEAN                 is_the_first_reliable;
+    BOOLEAN                 delete_mdl;
+    UINT16                  mtu;
+    tMCA_CHNL_CFG           chnl_cfg;
+    UINT16                  tx_size;
+    UINT8                   *p_tx_pkt;
+    UINT8                   *p_rx_pkt;
+    BOOLEAN                 cong;
+    btif_hl_soc_cb_t        *p_scb;
+    int                     channel_id;
+}btif_hl_mdl_cb_t;
+
+typedef enum
+{
+    BTIF_HL_CHAN_CB_STATE_NONE,
+    BTIF_HL_CHAN_CB_STATE_CONNECTING_PENDING,
+    BTIF_HL_CHAN_CB_STATE_CONNECTED_PENDING,
+
+    BTIF_HL_CHAN_CB_STATE_DISCONNECTING_PENDING,
+    BTIF_HL_CHAN_CB_STATE_DISCONNECTED_PENDING,
+    BTIF_HL_CHAN_CB_STATE_DESTROYED_PENDING,
+}btif_hl_chan_cb_state_t;
+typedef struct
+{
+    int                             channel_id;
+    int                             mdep_cfg_idx;
+    BOOLEAN                         in_use;
+    btif_hl_chan_cb_state_t         cb_state;
+    btif_hl_pend_dch_op_t           op;
+    BD_ADDR                         bd_addr;
+}btif_hl_pending_chan_cb_t;
+
+typedef struct
+{
+    btif_hl_mdl_cb_t                mdl[BTA_HL_NUM_MDLS_PER_MCL];
+    BOOLEAN                         in_use;
+    BOOLEAN                         is_connected;
+    UINT16                          req_ctrl_psm;
+    UINT16                          ctrl_psm;
+    UINT16                          data_psm;
+    BD_ADDR                         bd_addr;
+    UINT16                          cch_mtu;
+    tBTA_SEC                        sec_mask;
+    tBTA_HL_MCL_HANDLE              mcl_handle;
+    btif_hl_pending_chan_cb_t       pcb;
+
+
+    BOOLEAN                         valid_sdp_idx;
+    UINT8                           sdp_idx;
+
+    tBTA_HL_SDP                     sdp;
+    btif_hl_cch_op_t                cch_oper;
+}btif_hl_mcl_cb_t;
+
+typedef struct
+{
+    UINT8 mdep_cfg_idx;
+    int data_type;
+    int channel_id;
+    UINT8 app_idx;
+    BOOLEAN app_active;
+    //UINT8 app_nv_idx; /* one base */
+} btif_hl_extra_mdl_cfg_t;
+
+
+typedef struct
+{
+    tBTA_HL_MDL_CFG         base;
+    btif_hl_extra_mdl_cfg_t extra;
+} btif_hl_mdl_cfg_t;
+
+typedef struct
+{
+    BOOLEAN         active;
+    UINT16          mdl_id;
+    UINT8           mdep_cfg_idx;
+    BD_ADDR     bd_addr;
+    int channel_id;
+} btif_hl_delete_mdl_t;
+
+typedef struct
+{
+    btif_hl_mcl_cb_t                mcb[BTA_HL_NUM_MCLS]; /* application Control Blocks */
+    BOOLEAN                         in_use;              /* this CB is in use*/
+    UINT8                           app_id;
+    //UINT32                          sdp_handle;    /* SDP record handle */
+    tBTA_HL_SUP_FEATURE             sup_feature;
+    tBTA_HL_DCH_CFG                 channel_type[BTA_HL_NUM_MDEPS];
+    tBTA_HL_SDP_INFO_IND            sdp_info_ind;
+    btif_hl_cch_filter_t            filter;
+
+    btif_hl_mdl_cfg_t                 mdl_cfg[BTA_HL_NUM_MDL_CFGS];
+
+    btif_hl_delete_mdl_t            delete_mdl;
+    tBTA_HL_DEVICE_TYPE             dev_type;
+    tBTA_HL_APP_HANDLE              app_handle;
+
+    //UINT16                          data_mtu;   /* L2CAP MTU of the MCAP data channel */
+    UINT16                          sec_mask;   /* Security mask for BTM_SetSecurityLevel() */
+
+
+    char                            srv_name[BTA_SERVICE_NAME_LEN +1];        /* service name to be used in the SDP; null terminated*/
+    char                            srv_desp[BTA_SERVICE_DESP_LEN +1];        /* service description to be used in the SDP; null terminated */
+    char                            provider_name[BTA_PROVIDER_NAME_LEN +1];   /* provide name to be used in the SDP; null terminated */
+    char                            application_name[BTIF_HL_APPLICATION_NAME_LEN +1];   /* applicaiton name */
+
+}btif_hl_app_cb_t;
+typedef struct
+{
+    BOOLEAN                         in_use;
+    UINT8                           app_idx;
+}btif_hl_pending_reg_cb_t;
+
+/* BTIF-HL control block  */
+typedef struct
+{
+    btif_hl_app_cb_t              acb[BTA_HL_NUM_APPS];      /* HL Control Blocks */
+    btif_hl_pending_reg_cb_t      pcb[BTA_HL_NUM_APPS];
+    tBTA_HL_CTRL_CBACK            *p_ctrl_cback;             /* pointer to control callback function */
+    UINT8                         next_app_id;
+    UINT16                        next_channel_id;
+    btif_hl_state_t               state;
+
+} btif_hl_cb_t;
+
+
+enum
+{
+    BTIF_HL_SEND_CONNECTED_CB,
+    BTIF_HL_SEND_DISCONNECTED_CB,
+};
+typedef UINT8 btif_hl_evt_t;
+
+typedef struct
+{
+    int                     app_id;
+    BD_ADDR                 bd_addr;
+    int                     mdep_cfg_index;
+    int                     channel_id;
+    btif_hl_chan_cb_state_t cb_state;
+    int                     fd;
+}btif_hl_send_chan_state_cb_t;
+
+extern btif_hl_cb_t  btif_hl_cb;
+extern btif_hl_cb_t *p_btif_hl_cb;
+
+#define BTIF_HL_GET_CB_PTR() &(btif_hl_cb)
+#define BTIF_HL_GET_APP_CB_PTR(app_idx) &(btif_hl_cb.acb[(app_idx)])
+#define BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx) &(btif_hl_cb.acb[(app_idx)].mcb[(mcl_idx)])
+#define BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx) &(btif_hl_cb.acb[(app_idx)].mcb[(mcl_idx)].mdl[mdl_idx])
+#define BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx) &(btif_hl_cb.acb[app_idx].mcb[mcl_idx].pcb)
+#define BTIF_HL_GET_MDL_CFG_PTR(app_idx, item_idx) &(btif_hl_cb.acb[(app_idx)].mdl_cfg[(item_idx)])
+extern BOOLEAN btif_hl_find_mcl_idx(UINT8 app_idx, BD_ADDR p_bd_addr, UINT8 *p_mcl_idx);
+extern BOOLEAN btif_hl_find_app_idx(UINT8 app_id, UINT8 *p_app_idx);
+extern BOOLEAN btif_hl_find_avail_mcl_idx(UINT8 app_idx, UINT8 *p_mcl_idx);
+extern BOOLEAN btif_hl_find_avail_mdl_idx(UINT8 app_idx, UINT8 mcl_idx,
+                                          UINT8 *p_mdl_idx);
+extern BOOLEAN btif_hl_find_mcl_idx_using_handle( tBTA_HL_MCL_HANDLE mcl_handle,
+                                                  UINT8 *p_app_idx, UINT8 *p_mcl_idx);
+extern BOOLEAN  btif_hl_save_mdl_cfg(UINT8 app_id, UINT8 item_idx, tBTA_HL_MDL_CFG *p_mdl_cfg);
+extern BOOLEAN  btif_hl_delete_mdl_cfg(UINT8 app_id, UINT8 item_idx);
+extern void * btif_hl_get_buf(UINT16 size);
+extern void btif_hl_free_buf(void **p);
+extern BOOLEAN btif_hl_find_mdl_idx_using_handle(tBTA_HL_MDL_HANDLE mdl_handle,
+                                                 UINT8 *p_app_idx,UINT8 *p_mcl_idx,
+                                                 UINT8 *p_mdl_idx);
+extern void btif_hl_abort_pending_chan_setup(UINT8 app_idx, UINT8 mcl_idx);
+extern BOOLEAN btif_hl_proc_pending_op(UINT8 app_idx, UINT8 mcl_idx);
+#endif