diff options
Diffstat (limited to 'bta/include/bta_api.h')
| -rw-r--r-- | bta/include/bta_api.h | 278 |
1 files changed, 139 insertions, 139 deletions
diff --git a/bta/include/bta_api.h b/bta/include/bta_api.h index b8a4f50..39488bf 100644 --- a/bta/include/bta_api.h +++ b/bta/include/bta_api.h @@ -2,7 +2,7 @@ ** ** Name: bta_api.h ** -** Description: This is the public interface file for BTA, Widcomm's +** Description: This is the public interface file for BTA, Widcomm's ** Bluetooth application layer for mobile phones. ** ** Copyright (c) 2003-2010, Broadcom Corp., All Rights Reserved. @@ -11,7 +11,7 @@ *****************************************************************************/ #ifndef BTA_API_H #define BTA_API_H - + #include "data_types.h" #include "bt_target.h" #include "bt_types.h" @@ -37,10 +37,10 @@ typedef UINT8 tBTA_STATUS; /* - * Service ID + * Service ID * - * NOTES: When you add a new Service ID for BTA AND require to change the value of BTA_MAX_SERVICE_ID, - * make sure that the correct security ID of the new service from Security service definitions (btm_api.h) + * NOTES: When you add a new Service ID for BTA AND require to change the value of BTA_MAX_SERVICE_ID, + * make sure that the correct security ID of the new service from Security service definitions (btm_api.h) * should be added to bta_service_id_to_btm_srv_id_lkup_tbl table in bta_dm_act.c. */ @@ -195,8 +195,8 @@ typedef UINT16 tBTA_DM_CONN; #define BTA_DM_LIMITED_INQUIRY BTM_LIMITED_INQUIRY /* Perform limited inquiry. */ #if ((defined BLE_INCLUDED) && (BLE_INCLUDED == TRUE)) -#define BTA_BLE_INQUIRY_NONE BTM_BLE_INQUIRY_NONE -#define BTA_BLE_GENERAL_INQUIRY BTM_BLE_GENERAL_INQUIRY /* Perform LE general inquiry. */ +#define BTA_BLE_INQUIRY_NONE BTM_BLE_INQUIRY_NONE +#define BTA_BLE_GENERAL_INQUIRY BTM_BLE_GENERAL_INQUIRY /* Perform LE general inquiry. */ #define BTA_BLE_LIMITED_INQUIRY BTM_BLE_LIMITED_INQUIRY /* Perform LE limited inquiry. */ #endif typedef UINT8 tBTA_DM_INQ_MODE; @@ -211,7 +211,7 @@ typedef UINT8 tBTA_DM_INQ_FILT; /* Authorize Response */ #define BTA_DM_AUTH_PERM 0 /* Authorized for future connections to the service */ #define BTA_DM_AUTH_TEMP 1 /* Authorized for current connection only */ -#define BTA_DM_NOT_AUTH 2 /* Not authorized for the service */ +#define BTA_DM_NOT_AUTH 2 /* Not authorized for the service */ typedef UINT8 tBTA_AUTH_RESP; @@ -225,7 +225,7 @@ typedef UINT8 tBTA_PREF_ROLES; enum { - BTA_DM_NO_SCATTERNET, /* Device doesn't support scatternet, it might + BTA_DM_NO_SCATTERNET, /* Device doesn't support scatternet, it might support "role switch during connection" for an incoming connection, when it already has another connection in master role */ @@ -239,7 +239,7 @@ enum /* Inquiry filter device class condition */ -typedef struct +typedef struct { DEV_CLASS dev_class; /* device class of interest */ DEV_CLASS dev_class_mask; /* mask to determine the bits of device class of interest */ @@ -282,23 +282,23 @@ typedef struct #if BLE_INCLUDED == TRUE /* ADV data flag bit definition used for BTM_BLE_AD_TYPE_FLAG */ -#define BTA_BLE_LIMIT_DISC_FLAG BTM_BLE_LIMIT_DISC_FLAG -#define BTA_BLE_GEN_DISC_FLAG BTM_BLE_GEN_DISC_FLAG -#define BTA_BLE_BREDR_NOT_SPT BTM_BLE_BREDR_NOT_SPT -#define BTA_BLE_NON_LIMIT_DISC_FLAG BTM_BLE_NON_LIMIT_DISC_FLAG -#define BTA_BLE_ADV_FLAG_MASK BTM_BLE_ADV_FLAG_MASK -#define BTA_BLE_LIMIT_DISC_MASK BTM_BLE_LIMIT_DISC_MASK - -#define BTA_BLE_AD_BIT_DEV_NAME BTM_BLE_AD_BIT_DEV_NAME -#define BTA_BLE_AD_BIT_FLAGS BTM_BLE_AD_BIT_FLAGS -#define BTA_BLE_AD_BIT_MANU BTM_BLE_AD_BIT_MANU -#define BTA_BLE_AD_BIT_TX_PWR BTM_BLE_AD_BIT_TX_PWR -#define BTA_BLE_AD_BIT_ATTR BTM_BLE_AD_BIT_ATTR -#define BTA_BLE_AD_BIT_INT_RANGE BTM_BLE_AD_BIT_INT_RANGE -#define BTA_BLE_AD_BIT_SERVICE BTM_BLE_AD_BIT_SERVICE -#define BTA_BLE_AD_BIT_SERVICE_SOL BTM_BLE_AD_BIT_SERVICE_SOL -#define BTA_BLE_AD_BIT_SERVICE_DATA BTM_BLE_AD_BIT_SERVICE_DATA -#define BTA_BLE_AD_BIT_SIGN_DATA BTM_BLE_AD_BIT_SIGN_DATA +#define BTA_BLE_LIMIT_DISC_FLAG BTM_BLE_LIMIT_DISC_FLAG +#define BTA_BLE_GEN_DISC_FLAG BTM_BLE_GEN_DISC_FLAG +#define BTA_BLE_BREDR_NOT_SPT BTM_BLE_BREDR_NOT_SPT +#define BTA_BLE_NON_LIMIT_DISC_FLAG BTM_BLE_NON_LIMIT_DISC_FLAG +#define BTA_BLE_ADV_FLAG_MASK BTM_BLE_ADV_FLAG_MASK +#define BTA_BLE_LIMIT_DISC_MASK BTM_BLE_LIMIT_DISC_MASK + +#define BTA_BLE_AD_BIT_DEV_NAME BTM_BLE_AD_BIT_DEV_NAME +#define BTA_BLE_AD_BIT_FLAGS BTM_BLE_AD_BIT_FLAGS +#define BTA_BLE_AD_BIT_MANU BTM_BLE_AD_BIT_MANU +#define BTA_BLE_AD_BIT_TX_PWR BTM_BLE_AD_BIT_TX_PWR +#define BTA_BLE_AD_BIT_ATTR BTM_BLE_AD_BIT_ATTR +#define BTA_BLE_AD_BIT_INT_RANGE BTM_BLE_AD_BIT_INT_RANGE +#define BTA_BLE_AD_BIT_SERVICE BTM_BLE_AD_BIT_SERVICE +#define BTA_BLE_AD_BIT_SERVICE_SOL BTM_BLE_AD_BIT_SERVICE_SOL +#define BTA_BLE_AD_BIT_SERVICE_DATA BTM_BLE_AD_BIT_SERVICE_DATA +#define BTA_BLE_AD_BIT_SIGN_DATA BTM_BLE_AD_BIT_SIGN_DATA typedef UINT16 tBTA_BLE_AD_MASK; /* slave preferred connection interval range */ @@ -313,7 +313,7 @@ typedef struct typedef struct { UINT8 num_service; - BOOLEAN list_cmpl; + BOOLEAN list_cmpl; UINT16 *p_uuid; }tBTA_BLE_SERVICE; @@ -328,7 +328,7 @@ typedef struct #define BTA_BLE_NUM_AD_ATTR_MAX BTM_BLE_NUM_AD_ATTR_MAX /* attribute list contained in adv data */ -typedef struct +typedef struct { UINT8 num_attr; tBTA_BLE_ATTR attr_list[BTA_BLE_NUM_AD_ATTR_MAX]; @@ -355,7 +355,7 @@ typedef struct typedef struct { UINT8 conn_mode; - tBTA_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */ + tBTA_BLE_AD_MASK ad_mask; /* mask of the valid adv data field */ UINT8 flag; UINT8 tx_power_level; UINT8 remote_name_len; @@ -443,15 +443,15 @@ typedef struct #define BTA_DM_AUTH_SMP_RSP_TIMEOUT (BTA_DM_AUTH_FAIL_BASE + SMP_RSP_TIMEOUT) /* connection parameter boundary value and dummy value */ -#define BTA_DM_BLE_SCAN_INT_MIN BTM_BLE_SCAN_INT_MIN -#define BTA_DM_BLE_SCAN_INT_MAX BTM_BLE_SCAN_INT_MAX -#define BTA_DM_BLE_SCAN_WIN_MIN BTM_BLE_SCAN_WIN_MIN -#define BTA_DM_BLE_SCAN_WIN_MAX BTM_BLE_SCAN_WIN_MAX -#define BTA_DM_BLE_CONN_INT_MIN BTM_BLE_CONN_INT_MIN -#define BTA_DM_BLE_CONN_INT_MAX BTM_BLE_CONN_INT_MAX -#define BTA_DM_BLE_CONN_LATENCY_MAX BTM_BLE_CONN_LATENCY_MAX -#define BTA_DM_BLE_CONN_SUP_TOUT_MIN BTM_BLE_CONN_SUP_TOUT_MIN -#define BTA_DM_BLE_CONN_SUP_TOUT_MAX BTM_BLE_CONN_SUP_TOUT_MAX +#define BTA_DM_BLE_SCAN_INT_MIN BTM_BLE_SCAN_INT_MIN +#define BTA_DM_BLE_SCAN_INT_MAX BTM_BLE_SCAN_INT_MAX +#define BTA_DM_BLE_SCAN_WIN_MIN BTM_BLE_SCAN_WIN_MIN +#define BTA_DM_BLE_SCAN_WIN_MAX BTM_BLE_SCAN_WIN_MAX +#define BTA_DM_BLE_CONN_INT_MIN BTM_BLE_CONN_INT_MIN +#define BTA_DM_BLE_CONN_INT_MAX BTM_BLE_CONN_INT_MAX +#define BTA_DM_BLE_CONN_LATENCY_MAX BTM_BLE_CONN_LATENCY_MAX +#define BTA_DM_BLE_CONN_SUP_TOUT_MIN BTM_BLE_CONN_SUP_TOUT_MIN +#define BTA_DM_BLE_CONN_SUP_TOUT_MAX BTM_BLE_CONN_SUP_TOUT_MAX #define BTA_DM_BLE_CONN_PARAM_UNDEF BTM_BLE_CONN_PARAM_UNDEF /* use this value when a specific value not to be overwritten */ @@ -489,13 +489,13 @@ typedef struct BT_OCTET16 dhk; }tBTA_BLE_LOCAL_ID_KEYS; -#define BTA_DM_SEC_GRANTED BTA_SUCCESS +#define BTA_DM_SEC_GRANTED BTA_SUCCESS #define BTA_DM_SEC_PAIR_NOT_SPT BTA_DM_AUTH_SMP_PAIR_NOT_SUPPORT #define BTA_DM_SEC_REP_ATTEMPTS BTA_DM_AUTH_SMP_REPEATED_ATTEMPT typedef UINT8 tBTA_DM_BLE_SEC_GRANT; -#define BTA_DM_BLE_ONN_NONE BTM_BLE_CONN_NONE +#define BTA_DM_BLE_ONN_NONE BTM_BLE_CONN_NONE #define BTA_DM_BLE_CONN_AUTO BTM_BLE_CONN_AUTO #define BTA_DM_BLE_CONN_SELECTIVE BTM_BLE_CONN_SELECTIVE typedef UINT8 tBTA_DM_BLE_CONN_TYPE; @@ -567,7 +567,7 @@ typedef struct BD_ADDR bd_addr; /* BD address peer device. */ tBTA_SIG_STRENGTH_MASK mask; /* mask for the values that are valid */ tBTA_DM_RSSI_VALUE rssi_value; - tBTA_DM_LINK_QUALITY_VALUE link_quality_value; + tBTA_DM_LINK_QUALITY_VALUE link_quality_value; } tBTA_DM_SIG_STRENGTH; @@ -612,7 +612,7 @@ typedef tBTM_LE_AUTH_REQ tBTA_LE_AUTH_REQ; /* combination of the abo #if BTM_OOB_INCLUDED == TRUE #define BTA_OOB_UNKNOWN BTM_OOB_UNKNOWN #endif -typedef tBTM_OOB_DATA tBTA_OOB_DATA; +typedef tBTM_OOB_DATA tBTA_OOB_DATA; /* Structure associated with BTA_DM_SP_CFM_REQ_EVT */ typedef struct @@ -639,7 +639,7 @@ enum typedef UINT8 tBTA_SP_KEY_TYPE; /* Structure associated with BTA_DM_SP_KEYPRESS_EVT */ -typedef struct +typedef struct { BD_ADDR bd_addr; /* peer address */ tBTA_SP_KEY_TYPE notif_type; @@ -704,7 +704,7 @@ typedef tBTM_VSC_CMPL_CB tBTA_VENDOR_CMPL_CBACK; #define BTA_DM_DISC_BLE_RES_EVT 3 /* Discovery result for BLE GATT based servoce on a peer device. */ #define BTA_DM_DISC_CMPL_EVT 4 /* Discovery complete. */ #define BTA_DM_DI_DISC_CMPL_EVT 5 /* Discovery complete. */ -#define BTA_DM_SEARCH_CANCEL_CMPL_EVT 6 /* Search cancelled */ +#define BTA_DM_SEARCH_CANCEL_CMPL_EVT 6 /* Search cancelled */ typedef UINT8 tBTA_DM_SEARCH_EVT; @@ -752,7 +752,7 @@ typedef struct // btla-specific ++ UINT8 * p_raw_data; /* Raw data for discovery DB */ UINT32 raw_data_size; /* size of raw data */ - tBT_DEVICE_TYPE device_type; /* device type in case it is BLE device */ + tBT_DEVICE_TYPE device_type; /* device type in case it is BLE device */ UINT32 num_uuids; UINT8 *p_uuid_list; // btla-specific -- @@ -787,16 +787,16 @@ typedef void (tBTA_DM_EXEC_CBACK) (void * p_param); /* Encryption callback*/ typedef void (tBTA_DM_ENCRYPT_CBACK) (BD_ADDR bd_addr, tBTA_STATUS result); - + #if BLE_INCLUDED == TRUE -#define BTA_DM_BLE_SEC_NONE BTM_BLE_SEC_NONE -#define BTA_DM_BLE_SEC_ENCRYPT BTM_BLE_SEC_ENCRYPT -#define BTA_DM_BLE_SEC_NO_MITM BTM_BLE_SEC_ENCRYPT_NO_MITM -#define BTA_DM_BLE_SEC_MITM BTM_BLE_SEC_ENCRYPT_MITM -typedef tBTM_BLE_SEC_ACT tBTA_DM_BLE_SEC_ACT; +#define BTA_DM_BLE_SEC_NONE BTM_BLE_SEC_NONE +#define BTA_DM_BLE_SEC_ENCRYPT BTM_BLE_SEC_ENCRYPT +#define BTA_DM_BLE_SEC_NO_MITM BTM_BLE_SEC_ENCRYPT_NO_MITM +#define BTA_DM_BLE_SEC_MITM BTM_BLE_SEC_ENCRYPT_MITM +typedef tBTM_BLE_SEC_ACT tBTA_DM_BLE_SEC_ACT; #else -typedef UINT8 tBTA_DM_BLE_SEC_ACT; -#endif +typedef UINT8 tBTA_DM_BLE_SEC_ACT; +#endif /* Maximum service name length */ #define BTA_SERVICE_NAME_LEN 35 @@ -877,7 +877,7 @@ typedef UINT8 tBTA_DM_ROUTE_PATH; /* Used to set the DI record */ typedef tSDP_DI_RECORD tBTA_DI_RECORD; /* Used to get the DI record */ -typedef tSDP_DI_GET_RECORD tBTA_DI_GET_RECORD; +typedef tSDP_DI_GET_RECORD tBTA_DI_GET_RECORD; /* SDP discovery database */ typedef tSDP_DISCOVERY_DB tBTA_DISCOVERY_DB; @@ -902,7 +902,7 @@ extern "C" ** typically called at startup or when Bluetooth services ** are required by the phone. This function must be called ** before calling any other API function. -** +** ** ** Returns BTA_SUCCESS if successful. ** BTA_FAIL if internal failure. @@ -917,7 +917,7 @@ BTA_API extern tBTA_STATUS BTA_EnableBluetooth(tBTA_DM_SEC_CBACK *p_cback); ** Description This function disables BTA and the Bluetooth protocol ** stack. It is called when BTA is no longer being used ** by any application in the system. -** +** ** ** Returns void ** @@ -929,9 +929,9 @@ BTA_API extern tBTA_STATUS BTA_DisableBluetooth(void); ** Function BTA_EnableTestMode ** ** Description Enables bluetooth device under test mode -** ** -** Returns tBTA_STATUS +** +** Returns tBTA_STATUS ** *******************************************************************************/ BTA_API extern tBTA_STATUS BTA_EnableTestMode(void); @@ -941,9 +941,9 @@ BTA_API extern tBTA_STATUS BTA_EnableTestMode(void); ** Function BTA_DisableTestMode ** ** Description Disable bluetooth device under test mode -** ** -** Returns None +** +** Returns None ** *******************************************************************************/ BTA_API extern void BTA_DisableTestMode(void); @@ -955,10 +955,10 @@ BTA_API extern void BTA_DisableTestMode(void); ** Description This function tests whether the Bluetooth module is up ** and ready. This is a direct execution function that ** may lock task scheduling on some platforms. -** +** ** ** Returns TRUE if the module is ready. -** FALSE if the module is not ready. +** FALSE if the module is not ready. ** *******************************************************************************/ BTA_API extern BOOLEAN BTA_DmIsDeviceUp(void); @@ -968,7 +968,7 @@ BTA_API extern BOOLEAN BTA_DmIsDeviceUp(void); ** Function BTA_DmSetDeviceName ** ** Description This function sets the Bluetooth name of the local device. -** +** ** ** Returns void ** @@ -979,11 +979,11 @@ BTA_API extern void BTA_DmSetDeviceName(char *p_name); ** ** Function BTA_DmSetVisibility ** -** Description This function sets the Bluetooth connectable,discoverable, -** pairable and conn paired only modesmodes of the local device. +** Description This function sets the Bluetooth connectable,discoverable, +** pairable and conn paired only modesmodes of the local device. ** This controls whether other Bluetooth devices can find and connect to ** the local device. -** +** ** ** Returns void ** @@ -996,9 +996,9 @@ BTA_API extern void BTA_DmSetVisibility(tBTA_DM_DISC disc_mode, tBTA_DM_CONN con ** ** Description This function sets the parameters for page scan and ** inquiry scan. -** ** -** Returns void +** +** Returns void ** *******************************************************************************/ BTA_API extern void BTA_DmSetScanParam (UINT16 page_scan_interval, UINT16 page_scan_window, @@ -1014,7 +1014,7 @@ BTA_API extern void BTA_DmSetScanParam (UINT16 page_scan_interval, UINT16 page_s ** In order to use this API, BTM_BYPASS_AMP_AUTO_AFH must be set ** to be TRUE ** -** Returns void +** Returns void ** *******************************************************************************/ BTA_API extern void BTA_DmSetAfhChannels(UINT8 first, UINT8 last); @@ -1026,9 +1026,9 @@ BTA_API extern void BTA_DmSetAfhChannels(UINT8 first, UINT8 last); ** ** Description This function sends the vendor specific command ** to the controller -** ** -** Returns tBTA_STATUS +** +** Returns tBTA_STATUS ** *******************************************************************************/ BTA_API extern tBTA_STATUS BTA_DmVendorSpecificCommand (UINT16 opcode, UINT8 param_len,UINT8 *p_param_buf, tBTA_VENDOR_CMPL_CBACK *p_cback); @@ -1043,7 +1043,7 @@ BTA_API extern tBTA_STATUS BTA_DmVendorSpecificCommand (UINT16 opcode, UINT8 par ** inquiry it gets the remote name of the device. If ** parameter services is nonzero, service discovery will be ** performed on each device for the services specified. -** +** ** ** Returns void ** @@ -1057,7 +1057,7 @@ BTA_API extern void BTA_DmSearch(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK servic ** ** Description This function cancels a search that has been initiated ** by calling BTA_DmSearch(). -** +** ** ** Returns void ** @@ -1070,7 +1070,7 @@ BTA_API extern void BTA_DmSearchCancel(void); ** ** Description This function performs service discovery for the services ** of a particular peer device. -** +** ** ** Returns void ** @@ -1085,12 +1085,12 @@ BTA_API extern void BTA_DmDiscover(BD_ADDR bd_addr, tBTA_SERVICE_MASK services, ** ** Description This function performs service discovery for the services ** of a particular peer device. -** +** ** ** Returns void ** *******************************************************************************/ -BTA_API extern void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid, +BTA_API extern void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid, tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search); /******************************************************************************* @@ -1103,7 +1103,7 @@ BTA_API extern void BTA_DmDiscoverUUID(BD_ADDR bd_addr, tSDP_UUID *uuid, ** BTA_FAILURE if cached name is not available ** *******************************************************************************/ -tBTA_STATUS BTA_DmGetCachedRemoteName(BD_ADDR remote_device, UINT8 **pp_cached_name); +tBTA_STATUS BTA_DmGetCachedRemoteName(BD_ADDR remote_device, UINT8 **pp_cached_name); // btla-specific -- /******************************************************************************* @@ -1126,7 +1126,7 @@ BTA_API extern BOOLEAN BTA_DmIsMaster(BD_ADDR bd_addr); ** Description This function initiates a bonding procedure with a peer ** device. The bonding procedure enables authentication ** and optionally encryption on the Bluetooth link. -** +** ** ** Returns void ** @@ -1139,7 +1139,7 @@ BTA_API extern void BTA_DmBond(BD_ADDR bd_addr); ** ** Description This function cancels a bonding procedure with a peer ** device. -** +** ** ** Returns void ** @@ -1154,7 +1154,7 @@ BTA_API extern void BTA_DmBondCancel(BD_ADDR bd_addr); ** during a bonding procedure. The application should call ** this function after the security callback is called with ** a BTA_DM_PIN_REQ_EVT. -** +** ** ** Returns void ** @@ -1185,7 +1185,7 @@ BTA_API extern void BTA_DmLinkPolicy(BD_ADDR bd_addr, tBTA_DM_LP_MASK policy_mas ** Description This function retrieves the OOB data from local controller. ** The result is reported by bta_dm_co_loc_oob(). ** -** Returns void +** Returns void ** *******************************************************************************/ BTA_API extern void BTA_DmLocalOob(void); @@ -1198,7 +1198,7 @@ BTA_API extern void BTA_DmLocalOob(void); ** Description This function accepts or rejects the numerical value of the ** Simple Pairing process on BTA_DM_SP_CFM_REQ_EVT ** -** Returns void +** Returns void ** *******************************************************************************/ BTA_API extern void BTA_DmConfirm(BD_ADDR bd_addr, BOOLEAN accept); @@ -1210,7 +1210,7 @@ BTA_API extern void BTA_DmConfirm(BD_ADDR bd_addr, BOOLEAN accept); ** Description This function is called to cancel the simple pairing process ** reported by BTA_DM_SP_KEY_NOTIF_EVT ** -** Returns void +** Returns void ** *******************************************************************************/ BTA_API extern void BTA_DmPasskeyCancel(BD_ADDR bd_addr); @@ -1241,7 +1241,7 @@ BTA_API extern void BTA_DmAddDevice(BD_ADDR bd_addr, DEV_CLASS dev_class, ** which added bd_name and features as input parameters. ** ** -** Returns void +** Returns void ** *******************************************************************************/ BTA_API extern void BTA_DmAddDevWithName (BD_ADDR bd_addr, DEV_CLASS dev_class, @@ -1256,7 +1256,7 @@ BTA_API extern void BTA_DmAddDevWithName (BD_ADDR bd_addr, DEV_CLASS dev_class, ** Description This function removes a device from the security database. ** This is a direct execution function that may lock task ** scheduling on some platforms. -** +** ** ** Returns BTA_SUCCESS if successful. ** BTA_FAIL if operation failed. @@ -1272,7 +1272,7 @@ BTA_API extern tBTA_STATUS BTA_DmRemoveDevice(BD_ADDR bd_addr); ** authorization is requested by BTA. The application calls ** this function after the security callback is called with ** a BTA_DM_AUTHORIZE_EVT. -** +** ** ** Returns void ** @@ -1284,11 +1284,11 @@ BTA_API extern void BTA_DmAuthorizeReply(BD_ADDR bd_addr, tBTA_SERVICE_ID servic ** ** Function BTA_DmSignalStrength ** -** Description This function initiates RSSI and channnel quality +** Description This function initiates RSSI and channnel quality ** measurments. BTA_DM_SIG_STRENGTH_EVT is sent to ** application with the values of RSSI and channel ** quality -** +** ** ** Returns void ** @@ -1299,8 +1299,8 @@ BTA_API extern void BTA_DmSignalStrength(tBTA_SIG_STRENGTH_MASK mask, UINT16 per ** ** Function BTA_DmWriteInqTxPower ** -** Description This command is used to write the inquiry transmit power level -** used to transmit the inquiry (ID) data packets. +** Description This command is used to write the inquiry transmit power level +** used to transmit the inquiry (ID) data packets. ** ** Parameters tx_power - tx inquiry power to use, valid value is -70 ~ 20 @@ -1317,7 +1317,7 @@ BTA_API extern void BTA_DmWriteInqTxPower(INT8 tx_power); ** ** Parameters tBT_UUID - UUID ** -** Returns None +** Returns None ** *******************************************************************************/ BTA_API extern void BTA_DmEirAddUUID (tBT_UUID *p_uuid); @@ -1330,7 +1330,7 @@ BTA_API extern void BTA_DmEirAddUUID (tBT_UUID *p_uuid); ** ** Parameters tBT_UUID - UUID ** -** Returns None +** Returns None ** *******************************************************************************/ BTA_API extern void BTA_DmEirRemoveUUID (tBT_UUID *p_uuid); @@ -1345,7 +1345,7 @@ BTA_API extern void BTA_DmEirRemoveUUID (tBT_UUID *p_uuid); ** ** Parameters Pointer to User defined EIR config ** -** Returns None +** Returns None ** *******************************************************************************/ BTA_API extern void BTA_DmSetEIRConfig (tBTA_DM_EIR_CONF *p_eir_cfg); @@ -1360,7 +1360,7 @@ BTA_API extern void BTA_DmSetEIRConfig (tBTA_DM_EIR_CONF *p_eir_cfg); ** type - finding EIR data type ** p_length - return the length of EIR data ** -** Returns pointer of EIR data +** Returns pointer of EIR data ** *******************************************************************************/ BTA_API extern UINT8 *BTA_CheckEirData( UINT8 *p_eir, UINT8 tag, UINT8 *p_length ); @@ -1374,7 +1374,7 @@ BTA_API extern UINT8 *BTA_CheckEirData( UINT8 *p_eir, UINT8 tag, UINT8 *p_length ** Parameters p_eir - pointer of EIR significant part ** p_services - return the BTA service mask ** -** Returns None +** Returns None ** *******************************************************************************/ BTA_API extern void BTA_GetEirService( UINT8 *p_eir, tBTA_SERVICE_MASK *p_services ); @@ -1401,21 +1401,21 @@ BTA_API extern BOOLEAN BTA_DmUseSsr( BD_ADDR bd_addr ); ** Returns BTA_SUCCESS if record set sucessfully, otherwise error code. ** *******************************************************************************/ -BTA_API extern tBTA_STATUS BTA_DmSetLocalDiRecord( tBTA_DI_RECORD *p_device_info, +BTA_API extern tBTA_STATUS BTA_DmSetLocalDiRecord( tBTA_DI_RECORD *p_device_info, UINT32 *p_handle ); /******************************************************************************* ** ** Function BTA_DmGetLocalDiRecord ** -** Description Get a specified DI record to the local SDP database. If no -** record handle is provided, the primary DI record will be -** returned. +** Description Get a specified DI record to the local SDP database. If no +** record handle is provided, the primary DI record will be +** returned. ** ** Returns BTA_SUCCESS if record set sucessfully, otherwise error code. ** *******************************************************************************/ -BTA_API extern tBTA_STATUS BTA_DmGetLocalDiRecord( tBTA_DI_GET_RECORD *p_device_info, +BTA_API extern tBTA_STATUS BTA_DmGetLocalDiRecord( tBTA_DI_GET_RECORD *p_device_info, UINT32 *p_handle ); /******************************************************************************* @@ -1462,7 +1462,7 @@ BTA_API extern void BTA_SysFeatures (UINT16 sys_features); ** This API was named in lower case because it is only intended ** for the internal customers(like BTIF). ** -** Returns void +** Returns void ** *******************************************************************************/ BTA_API extern void bta_dmexecutecallback (tBTA_DM_EXEC_CBACK* p_callback, void * p_param); @@ -1474,11 +1474,11 @@ BTA_API extern void bta_dmexecutecallback (tBTA_DM_EXEC_CBACK* p_callback, void ** ** Description initialize the down sample converter. ** -** src_sps: original samples per second (source audio data) +** src_sps: original samples per second (source audio data) ** (ex. 44100, 48000) ** bits: number of bits per pcm sample (16) ** n_channels: number of channels (i.e. mono(1), stereo(2)...) -** +** ** Returns none ** *******************************************************************************/ @@ -1495,10 +1495,10 @@ BTA_API extern void BTA_DmPcmInitSamples (UINT32 src_sps, UINT32 bits, UINT32 n_ ** in_bytes: Length of the input PCM sample buffer in byte. ** p_dst: pointer to the buffer which is to be used to store ** the converted PCM samples. -** +** ** ** Returns INT32: number of samples converted. -** +** **************************************************************************************/ BTA_API extern INT32 BTA_DmPcmResample (void *p_src, UINT32 in_bytes, void *p_dst); #endif @@ -1524,11 +1524,11 @@ BTA_API extern void BTA_DmBleSecurityGrant(BD_ADDR bd_addr, tBTA_DM_BLE_SEC_GRAN /******************************************************************************* ** ** Function BTA_DmBleSetBgConnType -** -** Description This function is called to set BLE connectable mode for a +** +** Description This function is called to set BLE connectable mode for a ** peripheral device. ** -** Parameters bg_conn_type: it can be auto connection, or selective connection. +** Parameters bg_conn_type: it can be auto connection, or selective connection. ** p_select_cback: callback function when selective connection procedure ** is being used. ** @@ -1545,7 +1545,7 @@ BTA_API extern void BTA_DmBleSetBgConnType(tBTA_DM_BLE_CONN_TYPE bg_conn_type, t ** ** Parameters: bd_addr - BD address of the peer ** accept - passkey entry sucessful or declined. -** passkey - passkey value, must be a 6 digit number, +** passkey - passkey value, must be a 6 digit number, ** can be lead by 0. ** ** Returns void @@ -1568,7 +1568,7 @@ BTA_API extern void BTA_DmBlePasskeyReply(BD_ADDR bd_addr, BOOLEAN accept, UINT3 ** Returns void ** *******************************************************************************/ -BTA_API extern void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type, +BTA_API extern void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type, tBT_DEVICE_TYPE dev_type); @@ -1576,8 +1576,8 @@ BTA_API extern void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type ** ** Function BTA_DmAddBleKey ** -** Description Add/modify LE device information. This function will be -** normally called during host startup to restore all required +** Description Add/modify LE device information. This function will be +** normally called during host startup to restore all required ** information stored in the NVRAM. ** ** Parameters: bd_addr - BD address of the peer @@ -1587,14 +1587,14 @@ BTA_API extern void BTA_DmAddBleDevice(BD_ADDR bd_addr, tBLE_ADDR_TYPE addr_type ** Returns void ** *******************************************************************************/ -BTA_API extern void BTA_DmAddBleKey (BD_ADDR bd_addr, tBTA_LE_KEY_VALUE *p_le_key, +BTA_API extern void BTA_DmAddBleKey (BD_ADDR bd_addr, tBTA_LE_KEY_VALUE *p_le_key, tBTA_LE_KEY_TYPE key_type); /******************************************************************************* ** ** Function BTA_DmSetBlePrefConnParams ** -** Description This function is called to set the preferred connection +** Description This function is called to set the preferred connection ** parameters when default connection parameter is not desired. ** ** Parameters: bd_addr - BD address of the peripheral @@ -1603,11 +1603,11 @@ BTA_API extern void BTA_DmAddBleKey (BD_ADDR bd_addr, tBTA_LE_KEY_VALUE *p_le_ke ** slave_latency - preferred slave latency ** supervision_tout - preferred supervision timeout ** -** +** ** Returns void ** *******************************************************************************/ -BTA_API extern void BTA_DmSetBlePrefConnParams(BD_ADDR bd_addr, +BTA_API extern void BTA_DmSetBlePrefConnParams(BD_ADDR bd_addr, UINT16 min_conn_int, UINT16 max_conn_int, UINT16 slave_latency, UINT16 supervision_tout ); @@ -1615,57 +1615,57 @@ BTA_API extern void BTA_DmSetBlePrefConnParams(BD_ADDR bd_addr, ** ** Function BTA_DmSetBleConnScanParams ** -** Description This function is called to set scan parameters used in +** Description This function is called to set scan parameters used in ** BLE connection request ** ** Parameters: bd_addr - BD address of the peripheral ** scan_interval - scan interval ** scan_window - scan window -** +** ** Returns void ** *******************************************************************************/ -BTA_API extern void BTA_DmSetBleConnScanParams(UINT16 scan_interval, +BTA_API extern void BTA_DmSetBleConnScanParams(UINT16 scan_interval, UINT16 scan_window ); /******************************************************************************* ** ** Function BTA_DmSearchExt ** -** Description This function searches for peer Bluetooth devices. It performs -** an inquiry and gets the remote name for devices. Service +** Description This function searches for peer Bluetooth devices. It performs +** an inquiry and gets the remote name for devices. Service ** discovery is done if services is non zero -** +** ** Parameters p_dm_inq: inquiry conditions ** services: if service is not empty, service discovery will be done. -** for all GATT based service condition, put num_uuid, and +** for all GATT based service condition, put num_uuid, and ** p_uuid is the pointer to the list of UUID values. -** p_cback: callback functino when search is completed. -** -** +** p_cback: callback functino when search is completed. +** ** -** Returns void +** +** Returns void ** *******************************************************************************/ -BTA_API extern void BTA_DmSearchExt(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK_EXT *p_services, +BTA_API extern void BTA_DmSearchExt(tBTA_DM_INQ *p_dm_inq, tBTA_SERVICE_MASK_EXT *p_services, tBTA_DM_SEARCH_CBACK *p_cback); /******************************************************************************* ** ** Function BTA_DmDiscoverExt ** -** Description This function does service discovery for services of a +** Description This function does service discovery for services of a ** peer device. When services.num_uuid is 0, it indicates all ** GATT based services are to be searched; other wise a list of -** UUID of interested services should be provided through +** UUID of interested services should be provided through ** services.p_uuid. -** ** ** -** Returns void +** +** Returns void ** *******************************************************************************/ -BTA_API extern void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services, +BTA_API extern void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_services, tBTA_DM_SEARCH_CBACK *p_cback, BOOLEAN sdp_search); @@ -1681,13 +1681,13 @@ BTA_API extern void BTA_DmDiscoverExt(BD_ADDR bd_addr, tBTA_SERVICE_MASK_EXT *p_ ** Parameters: bd_addr - Address of the peer device ** p_callback - Pointer to callback function to indicat the ** link encryption status -** sec_act - This is the security action to indicate +** sec_act - This is the security action to indicate ** what knid of BLE security level is required for -** the BLE link if the BLE is supported +** the BLE link if the BLE is supported ** Note: This parameter is ignored for the BR/EDR link -** or the BLE is not supported -** -** Returns void +** or the BLE is not supported +** +** Returns void ** ** *******************************************************************************/ |