diff options
Diffstat (limited to 'bta/include/bta_dm_co.h')
-rw-r--r-- | bta/include/bta_dm_co.h | 274 |
1 files changed, 274 insertions, 0 deletions
diff --git a/bta/include/bta_dm_co.h b/bta/include/bta_dm_co.h new file mode 100644 index 0000000..864104e --- /dev/null +++ b/bta/include/bta_dm_co.h @@ -0,0 +1,274 @@ +/****************************************************************************** + * + * Copyright (C) 2006-2012 Broadcom Corporation + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +/****************************************************************************** + * + * This is the interface file for device mananger callout functions. + * + ******************************************************************************/ +#ifndef BTA_DM_CO_H +#define BTA_DM_CO_H + +#include "bta_sys.h" + + +#ifndef BTA_SCO_OUT_PKT_SIZE + #define BTA_SCO_OUT_PKT_SIZE BTM_SCO_DATA_SIZE_MAX +#endif + +#define BTA_SCO_CODEC_PCM 0 /* used for regular SCO */ +#define BTA_SCO_CODEC_SBC 1 /* used for WBS */ +typedef UINT8 tBTA_SCO_CODEC_TYPE; + +#define BTA_DM_SCO_SAMP_RATE_8K 8000 +#define BTA_DM_SCO_SAMP_RATE_16K 16000 + +/* SCO codec information */ +typedef struct +{ + tBTA_SCO_CODEC_TYPE codec_type; +}tBTA_CODEC_INFO; + +#define BTA_DM_SCO_ROUTE_PCM BTM_SCO_ROUTE_PCM +#define BTA_DM_SCO_ROUTE_HCI BTM_SCO_ROUTE_HCI + +typedef tBTM_SCO_ROUTE_TYPE tBTA_DM_SCO_ROUTE_TYPE; + + +/***************************************************************************** +** Function Declarations +*****************************************************************************/ + +/******************************************************************************* +** +** Function bta_dm_co_io_req +** +** Description This callout function is executed by DM to get IO capabilities +** of the local device for the Simple Pairing process +** +** Parameters bd_addr - The peer device +** *p_io_cap - The local Input/Output capabilities +** *p_oob_data - TRUE, if OOB data is available for the peer device. +** *p_auth_req - TRUE, if MITM protection is required. +** +** Returns void. +** +*******************************************************************************/ +BTA_API extern void bta_dm_co_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, + tBTA_OOB_DATA *p_oob_data, tBTA_AUTH_REQ *p_auth_req, + BOOLEAN is_orig); + +/******************************************************************************* +** +** Function bta_dm_co_io_rsp +** +** Description This callout function is executed by DM to report IO capabilities +** of the peer device for the Simple Pairing process +** +** Parameters bd_addr - The peer device +** io_cap - The remote Input/Output capabilities +** oob_data - TRUE, if OOB data is available for the peer device. +** auth_req - TRUE, if MITM protection is required. +** +** Returns void. +** +*******************************************************************************/ +BTA_API extern void bta_dm_co_io_rsp(BD_ADDR bd_addr, tBTA_IO_CAP io_cap, + tBTA_OOB_DATA oob_data, tBTA_AUTH_REQ auth_req); + +/******************************************************************************* +** +** Function bta_dm_co_lk_upgrade +** +** Description This callout function is executed by DM to check if the +** platform wants allow link key upgrade +** +** Parameters bd_addr - The peer device +** *p_upgrade - TRUE, if link key upgrade is desired. +** +** Returns void. +** +*******************************************************************************/ +BTA_API extern void bta_dm_co_lk_upgrade(BD_ADDR bd_addr, BOOLEAN *p_upgrade ); + +/******************************************************************************* +** +** Function bta_dm_co_loc_oob +** +** Description This callout function is executed by DM to report the OOB +** data of the local device for the Simple Pairing process +** +** Parameters valid - TRUE, if the local OOB data is retrieved from LM +** c - Simple Pairing Hash C +** r - Simple Pairing Randomnizer R +** +** Returns void. +** +*******************************************************************************/ +BTA_API extern void bta_dm_co_loc_oob(BOOLEAN valid, BT_OCTET16 c, BT_OCTET16 r); + +/******************************************************************************* +** +** Function bta_dm_co_rmt_oob +** +** Description This callout function is executed by DM to request the OOB +** data for the remote device for the Simple Pairing process +** +** Parameters bd_addr - The peer device +** +** Returns void. +** +*******************************************************************************/ +BTA_API extern void bta_dm_co_rmt_oob(BD_ADDR bd_addr); + +/***************************************************************************** +** SCO over HCI Function Declarations +*****************************************************************************/ +/******************************************************************************* +** +** Function bta_dm_sco_co_init +** +** Description This function can be used by the phone to initialize audio +** codec or for other initialization purposes before SCO connection +** is opened. +** +** +** Returns Void. +** +*******************************************************************************/ +BTA_API extern tBTA_DM_SCO_ROUTE_TYPE bta_dm_sco_co_init(UINT32 rx_bw, UINT32 tx_bw, + tBTA_CODEC_INFO *p_codec_info, UINT8 app_id); + + +/******************************************************************************* +** +** Function bta_dm_sco_co_open +** +** Description This function is executed when a SCO connection is open. +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void bta_dm_sco_co_open(UINT16 handle, UINT8 pkt_size, UINT16 event); + +/******************************************************************************* +** +** Function bta_dm_sco_co_close +** +** Description This function is called when a SCO connection is closed +** +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void bta_dm_sco_co_close(void); + +/******************************************************************************* +** +** Function bta_dm_sco_co_out_data +** +** Description This function is called to send SCO data over HCI. +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void bta_dm_sco_co_out_data(BT_HDR **p_buf); + +/******************************************************************************* +** +** Function bta_dm_sco_co_in_data +** +** Description This function is called to send incoming SCO data to application. +** +** Returns void +** +*******************************************************************************/ +BTA_API extern void bta_dm_sco_co_in_data(BT_HDR *p_buf, tBTM_SCO_DATA_FLAG status); + + + +/******************************************************************************* +** +** Function bta_dm_co_ble_io_req +** +** Description This callout function is executed by DM to get BLE IO capabilities +** before SMP pairing gets going. +** +** Parameters bd_addr - The peer device +** *p_io_cap - The local Input/Output capabilities +** *p_oob_data - TRUE, if OOB data is available for the peer device. +** *p_auth_req - Auth request setting (Bonding and MITM required or not) +** *p_max_key_size - max key size local device supported. +** *p_init_key - initiator keys. +** *p_resp_key - responder keys. +** +** Returns void. +** +*******************************************************************************/ +BTA_API extern void bta_dm_co_ble_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, + tBTA_OOB_DATA *p_oob_data, + tBTA_LE_AUTH_REQ *p_auth_req, + UINT8 *p_max_key_size, + tBTA_LE_KEY_TYPE *p_init_key, + tBTA_LE_KEY_TYPE *p_resp_key ); + + +/******************************************************************************* +** +** Function bta_dm_co_ble_local_key_reload +** +** Description This callout function is to load the local BLE keys if available +** on the device. +** +** Parameters none +** +** Returns void. +** +*******************************************************************************/ +BTA_API extern void bta_dm_co_ble_load_local_keys (tBTA_DM_BLE_LOCAL_KEY_MASK *p_key_mask, BT_OCTET16 er, + tBTA_BLE_LOCAL_ID_KEYS *p_id_keys); + +// btla-specific ++ +/******************************************************************************* +** +** Function bta_dm_co_ble_io_req +** +** Description This callout function is executed by DM to get BLE IO capabilities +** before SMP pairing gets going. +** +** Parameters bd_addr - The peer device +** *p_io_cap - The local Input/Output capabilities +** *p_oob_data - TRUE, if OOB data is available for the peer device. +** *p_auth_req - Auth request setting (Bonding and MITM required or not) +** *p_max_key_size - max key size local device supported. +** *p_init_key - initiator keys. +** *p_resp_key - responder keys. +** +** Returns void. +** +*******************************************************************************/ +BTA_API extern void bta_dm_co_ble_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, + tBTA_OOB_DATA *p_oob_data, + tBTA_LE_AUTH_REQ *p_auth_req, + UINT8 *p_max_key_size, + tBTA_LE_KEY_TYPE *p_init_key, + tBTA_LE_KEY_TYPE *p_resp_key ); +// btla-specific -- + +#endif |