diff options
Diffstat (limited to 'btif/co/bta_dm_co.c')
-rw-r--r-- | btif/co/bta_dm_co.c | 417 |
1 files changed, 417 insertions, 0 deletions
diff --git a/btif/co/bta_dm_co.c b/btif/co/bta_dm_co.c new file mode 100644 index 0000000..611af2d --- /dev/null +++ b/btif/co/bta_dm_co.c @@ -0,0 +1,417 @@ +/****************************************************************************** + * + * Copyright (C) 2009-2012 Broadcom Corporation + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ +#include <stdio.h> +#include <stdlib.h> + +#include "bta_api.h" +#include "bta_sys.h" +#include "bta_dm_co.h" +#include "bta_dm_ci.h" +#if (BTM_OOB_INCLUDED == TRUE) +#include "btif_dm.h" +#endif +/******************************************************************************* +** +** Function bta_dm_co_get_compress_memory +** +** Description This callout function is executed by DM to get memory for compression + +** Parameters id - BTA SYS ID +** memory_p - memory return by callout +** memory_size - memory size +** +** Returns TRUE for success, FALSE for fail. +** +*******************************************************************************/ +BOOLEAN bta_dm_co_get_compress_memory(tBTA_SYS_ID id, UINT8 **memory_p, UINT32 *memory_size) +{ + return TRUE; +} + +/******************************************************************************* +** +** Function bta_dm_co_io_req +** +** Description This callout function is executed by DM to get IO capabilities +** of the local device for the Simple Pairing process +** +** Parameters bd_addr - The peer device +** *p_io_cap - The local Input/Output capabilities +** *p_oob_data - TRUE, if OOB data is available for the peer device. +** *p_auth_req - TRUE, if MITM protection is required. +** +** Returns void. +** +*******************************************************************************/ +void bta_dm_co_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, tBTA_OOB_DATA *p_oob_data, + tBTA_AUTH_REQ *p_auth_req, BOOLEAN is_orig) +{ +#if (BTM_OOB_INCLUDED == TRUE) + btif_dm_set_oob_for_io_req(p_oob_data); +#endif + BTIF_TRACE_DEBUG1("bta_dm_co_io_req *p_oob_data = %d", *p_oob_data); + BTIF_TRACE_DEBUG1("bta_dm_co_io_req *p_io_cap = %d", *p_io_cap); + BTIF_TRACE_DEBUG1("bta_dm_co_io_req *p_auth_req = %d", *p_auth_req); + BTIF_TRACE_DEBUG1("bta_dm_co_io_req is_orig = %d", is_orig); +} + +/******************************************************************************* +** +** Function bta_dm_co_io_rsp +** +** Description This callout function is executed by DM to report IO capabilities +** of the peer device for the Simple Pairing process +** +** Parameters bd_addr - The peer device +** io_cap - The remote Input/Output capabilities +** oob_data - TRUE, if OOB data is available for the peer device. +** auth_req - TRUE, if MITM protection is required. +** +** Returns void. +** +*******************************************************************************/ +void bta_dm_co_io_rsp(BD_ADDR bd_addr, tBTA_IO_CAP io_cap, + tBTA_OOB_DATA oob_data, tBTA_AUTH_REQ auth_req) +{ +} + +/******************************************************************************* +** +** Function bta_dm_co_lk_upgrade +** +** Description This callout function is executed by DM to check if the +** platform wants allow link key upgrade +** +** Parameters bd_addr - The peer device +** *p_upgrade - TRUE, if link key upgrade is desired. +** +** Returns void. +** +*******************************************************************************/ +void bta_dm_co_lk_upgrade(BD_ADDR bd_addr, BOOLEAN *p_upgrade ) +{ +} + +#if (BTM_OOB_INCLUDED == TRUE) +/******************************************************************************* +** +** Function bta_dm_co_loc_oob +** +** Description This callout function is executed by DM to report the OOB +** data of the local device for the Simple Pairing process +** +** Parameters valid - TRUE, if the local OOB data is retrieved from LM +** c - Simple Pairing Hash C +** r - Simple Pairing Randomnizer R +** +** Returns void. +** +*******************************************************************************/ +void bta_dm_co_loc_oob(BOOLEAN valid, BT_OCTET16 c, BT_OCTET16 r) +{ + BTIF_TRACE_DEBUG1("bta_dm_co_loc_oob, valid = %d", valid); +#ifdef BTIF_DM_OOB_TEST + btif_dm_proc_loc_oob(valid, c, r); +#endif +} + +/******************************************************************************* +** +** Function bta_dm_co_rmt_oob +** +** Description This callout function is executed by DM to request the OOB +** data for the remote device for the Simple Pairing process +** Need to call bta_dm_ci_rmt_oob() in response +** +** Parameters bd_addr - The peer device +** +** Returns void. +** +*******************************************************************************/ +void bta_dm_co_rmt_oob(BD_ADDR bd_addr) +{ + BT_OCTET16 p_c; + BT_OCTET16 p_r; + BOOLEAN result = FALSE; + +#ifdef BTIF_DM_OOB_TEST + result = btif_dm_proc_rmt_oob(bd_addr, p_c, p_r); +#endif + + BTIF_TRACE_DEBUG1("bta_dm_co_rmt_oob: result=%d",result); + bta_dm_ci_rmt_oob(result, bd_addr, p_c, p_r); +} + +#endif /* BTM_OOB_INCLUDED */ + + +// REMOVE FOR BLUEDROID ? + +#if (BTM_SCO_HCI_INCLUDED == TRUE ) && (BTM_SCO_INCLUDED == TRUE) + +/******************************************************************************* +** +** Function btui_sco_codec_callback +** +** Description Callback for btui codec. +** +** +** Returns void +** +*******************************************************************************/ +static void btui_sco_codec_callback(UINT16 event, UINT16 sco_handle) +{ + bta_dm_sco_ci_data_ready(event, sco_handle); +} +/******************************************************************************* +** +** Function bta_dm_sco_co_init +** +** Description This function can be used by the phone to initialize audio +** codec or for other initialization purposes before SCO connection +** is opened. +** +** +** Returns tBTA_DM_SCO_ROUTE_TYPE: SCO routing configuration type. +** +*******************************************************************************/ +tBTA_DM_SCO_ROUTE_TYPE bta_dm_sco_co_init(UINT32 rx_bw, UINT32 tx_bw, + tBTA_CODEC_INFO * p_codec_type, UINT8 app_id) +{ + tBTM_SCO_ROUTE_TYPE route = BTA_DM_SCO_ROUTE_PCM; + + BTIF_TRACE_DEBUG0("bta_dm_sco_co_init"); + + /* set up SCO routing configuration if SCO over HCI app ID is used and run time + configuration is set to SCO over HCI */ + /* HS invoke this call-out */ + if ( +#if (BTA_HS_INCLUDED == TRUE ) && (BTA_HS_INCLUDED == TRUE) + (app_id == BTUI_DM_SCO_4_HS_APP_ID && btui_cfg.hs_sco_over_hci) || +#endif + /* AG invoke this call-out */ + (app_id != BTUI_DM_SCO_4_HS_APP_ID && btui_cfg.ag_sco_over_hci )) + { + route = btui_cb.sco_hci = BTA_DM_SCO_ROUTE_HCI; + } + /* no codec is is used for the SCO data */ + if (p_codec_type->codec_type == BTA_SCO_CODEC_PCM && route == BTA_DM_SCO_ROUTE_HCI) + { + /* initialize SCO codec */ + if (!btui_sco_codec_init(rx_bw, tx_bw)) + { + BTIF_TRACE_ERROR0("codec initialization exception!"); + } + } + + return route; +} + + + +/******************************************************************************* +** +** Function bta_dm_sco_co_open +** +** Description This function is executed when a SCO connection is open. +** +** +** Returns void +** +*******************************************************************************/ +void bta_dm_sco_co_open(UINT16 handle, UINT8 pkt_size, UINT16 event) +{ + tBTUI_SCO_CODEC_CFG cfg; + + if (btui_cb.sco_hci) + { + BTIF_TRACE_DEBUG2("bta_dm_sco_co_open handle:%d pkt_size:%d", handle, pkt_size); + /* use dedicated SCO buffer pool for SCO TX data */ + cfg.pool_id = HCI_SCO_POOL_ID; + cfg.p_cback = btui_sco_codec_callback; + cfg.pkt_size = pkt_size; + cfg.cb_event = event; + /* open and start the codec */ + btui_sco_codec_open(&cfg); + btui_sco_codec_start(handle); + } +} + +/******************************************************************************* +** +** Function bta_dm_sco_co_close +** +** Description This function is called when a SCO connection is closed +** +** +** Returns void +** +*******************************************************************************/ +void bta_dm_sco_co_close(void) +{ + if (btui_cb.sco_hci) + { + BTIF_TRACE_DEBUG0("bta_dm_sco_co_close close codec"); + /* close sco codec */ + btui_sco_codec_close(); + + btui_cb.sco_hci = FALSE; + } +} + +/******************************************************************************* +** +** Function bta_dm_sco_co_in_data +** +** Description This function is called to send incoming SCO data to application. +** +** Returns void +** +*******************************************************************************/ +void bta_dm_sco_co_in_data(BT_HDR *p_buf) +{ + if (btui_cfg.sco_use_mic) + btui_sco_codec_inqdata (p_buf); + else + GKI_freebuf(p_buf); +} + +/******************************************************************************* +** +** Function bta_dm_sco_co_out_data +** +** Description This function is called to send SCO data over HCI. +** +** Returns void +** +*******************************************************************************/ +void bta_dm_sco_co_out_data(BT_HDR **p_buf) +{ + btui_sco_codec_readbuf(p_buf); +} + +#endif /* #if (BTM_SCO_HCI_INCLUDED == TRUE ) && (BTM_SCO_INCLUDED == TRUE)*/ + + +#if (defined BLE_INCLUDED && BLE_INCLUDED == TRUE) +/******************************************************************************* +** +** Function bta_dm_co_le_io_key_req +** +** Description This callout function is executed by DM to get BLE key information +** before SMP pairing gets going. +** +** Parameters bd_addr - The peer device +** *p_max_key_size - max key size local device supported. +** *p_init_key - initiator keys. +** *p_resp_key - responder keys. +** +** Returns void. +** +*******************************************************************************/ +void bta_dm_co_le_io_key_req(BD_ADDR bd_addr, UINT8 *p_max_key_size, + tBTA_LE_KEY_TYPE *p_init_key, + tBTA_LE_KEY_TYPE *p_resp_key ) +{ + BTIF_TRACE_ERROR0("##################################"); + BTIF_TRACE_ERROR0("bta_dm_co_le_io_key_req: only setting max size to 16"); + BTIF_TRACE_ERROR0("##################################"); + *p_max_key_size = 16; + *p_init_key = *p_resp_key = + (BTA_LE_KEY_PENC|BTA_LE_KEY_PID|BTA_LE_KEY_PCSRK|BTA_LE_KEY_LENC|BTA_LE_KEY_LID|BTA_LE_KEY_LCSRK); +} + + +/******************************************************************************* +** +** Function bta_dm_co_ble_local_key_reload +** +** Description This callout function is to load the local BLE keys if available +** on the device. +** +** Parameters none +** +** Returns void. +** +*******************************************************************************/ +void bta_dm_co_ble_load_local_keys(tBTA_DM_BLE_LOCAL_KEY_MASK *p_key_mask, BT_OCTET16 er, + tBTA_BLE_LOCAL_ID_KEYS *p_id_keys) +{ + BTIF_TRACE_ERROR0("##################################"); + BTIF_TRACE_ERROR0("bta_dm_co_ble_load_local_keys: TBD Load local keys if any are persisted"); + BTIF_TRACE_ERROR0("##################################"); +} + +/******************************************************************************* +** +** Function bta_dm_co_ble_io_req +** +** Description This callout function is executed by DM to get BLE IO capabilities +** before SMP pairing gets going. +** +** Parameters bd_addr - The peer device +** *p_io_cap - The local Input/Output capabilities +** *p_oob_data - TRUE, if OOB data is available for the peer device. +** *p_auth_req - Auth request setting (Bonding and MITM required or not) +** *p_max_key_size - max key size local device supported. +** *p_init_key - initiator keys. +** *p_resp_key - responder keys. +** +** Returns void. +** +*******************************************************************************/ +void bta_dm_co_ble_io_req(BD_ADDR bd_addr, tBTA_IO_CAP *p_io_cap, + tBTA_OOB_DATA *p_oob_data, + tBTA_LE_AUTH_REQ *p_auth_req, + UINT8 *p_max_key_size, + tBTA_LE_KEY_TYPE *p_init_key, + tBTA_LE_KEY_TYPE *p_resp_key ) +{ + /* if OOB is not supported, this call-out function does not need to do anything + * otherwise, look for the OOB data associated with the address and set *p_oob_data accordingly + * If the answer can not be obtained right away, + * set *p_oob_data to BTA_OOB_UNKNOWN and call bta_dm_ci_io_req() when the answer is available */ + + /* *p_auth_req by default is FALSE for devices with NoInputNoOutput; TRUE for other devices. */ + BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_auth_req=%d ble_authereq=%d", *p_auth_req, bte_appl_cfg.ble_auth_req); + BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_io_cap=%d ble_io_cap=%d", *p_io_cap, bte_appl_cfg.ble_io_cap); + BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_init_key=%d ble_init_key=%d", *p_init_key, bte_appl_cfg.ble_init_key); + BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_resp_key=%d ble_resp_key=%d", *p_resp_key, bte_appl_cfg.ble_resp_key ); + BTIF_TRACE_ERROR2("bta_dm_co_ble_io_req. p_max_key_size=%d ble_max_key_size=%d", *p_max_key_size, bte_appl_cfg.ble_max_key_size ); + + *p_oob_data = FALSE; + if (bte_appl_cfg.ble_auth_req) + *p_auth_req = bte_appl_cfg.ble_auth_req | (bte_appl_cfg.ble_auth_req & 0x04) | ((*p_auth_req) & 0x04); + + if (bte_appl_cfg.ble_io_cap <=4) + *p_io_cap = bte_appl_cfg.ble_io_cap; + + if (bte_appl_cfg.ble_init_key<=7) + *p_init_key = bte_appl_cfg.ble_init_key; + + if (bte_appl_cfg.ble_resp_key<=7) + *p_resp_key = bte_appl_cfg.ble_resp_key; + + if (bte_appl_cfg.ble_max_key_size<=16) + *p_max_key_size = bte_appl_cfg.ble_max_key_size; + +} + + +#endif + |