diff options
Diffstat (limited to 'btif/co/bta_pan_co.c')
-rw-r--r-- | btif/co/bta_pan_co.c | 360 |
1 files changed, 360 insertions, 0 deletions
diff --git a/btif/co/bta_pan_co.c b/btif/co/bta_pan_co.c new file mode 100644 index 0000000..ec6d44e --- /dev/null +++ b/btif/co/bta_pan_co.c @@ -0,0 +1,360 @@ +/************************************************************************************ + * + * Copyright (C) 2009-2011 Broadcom Corporation + * + * This program is the proprietary software of Broadcom Corporation and/or its + * licensors, and may only be used, duplicated, modified or distributed + * pursuant to the terms and conditions of a separate, written license + * agreement executed between you and Broadcom (an "Authorized License"). + * Except as set forth in an Authorized License, Broadcom grants no license + * (express or implied), right to use, or waiver of any kind with respect to + * the Software, and Broadcom expressly reserves all rights in and to the + * Software and all intellectual property rights therein. + * IF YOU HAVE NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS + * SOFTWARE IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE + * ALL USE OF THE SOFTWARE. + * + * Except as expressly set forth in the Authorized License, + * + * 1. This program, including its structure, sequence and organization, + * constitutes the valuable trade secrets of Broadcom, and you shall + * use all reasonable efforts to protect the confidentiality thereof, + * and to use this information only in connection with your use of + * Broadcom integrated circuit products. + * + * 2. TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED + * "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES, + * REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, + * OR OTHERWISE, WITH RESPECT TO THE SOFTWARE. BROADCOM SPECIFICALLY + * DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, + * NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES, + * ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR + * CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING OUT + * OF USE OR PERFORMANCE OF THE SOFTWARE. + * + * 3. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL BROADCOM OR + * ITS LICENSORS BE LIABLE FOR + * (i) CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY + * DAMAGES WHATSOEVER ARISING OUT OF OR IN ANY WAY RELATING TO + * YOUR USE OF OR INABILITY TO USE THE SOFTWARE EVEN IF BROADCOM + * HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES; OR + * (ii) ANY AMOUNT IN EXCESS OF THE AMOUNT ACTUALLY PAID FOR THE + * SOFTWARE ITSELF OR U.S. $1, WHICHEVER IS GREATER. THESE + * LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF + * ESSENTIAL PURPOSE OF ANY LIMITED REMEDY. + * + ************************************************************************************/ + +/************************************************************************************ + * + * Filename: bta_pan_co.c + * + * Description: PAN stack callout api + * + * + ***********************************************************************************/ +#include "bta_api.h" +#include "bta_pan_api.h" +#include "bta_pan_ci.h" +#include "bta_pan_co.h" +#include "pan_api.h" +#include "gki.h" +//#include "btui.h" +//#include "btui_int.h" +#include <hardware/bluetooth.h> +#include <hardware/bt_pan.h> +#include "btif_pan_internal.h" +#include "bd.h" + + +#include <cutils/log.h> +#define info(fmt, ...) LOGI ("%s: " fmt,__FUNCTION__, ## __VA_ARGS__) +#define debug(fmt, ...) LOGD ("%s: " fmt,__FUNCTION__, ## __VA_ARGS__) +#define warn(fmt, ...) LOGW ("## WARNING : %s: " fmt "##",__FUNCTION__, ## __VA_ARGS__) +#define error(fmt, ...) LOGE ("## ERROR : %s: " fmt "##",__FUNCTION__, ## __VA_ARGS__) +#define asrt(s) if(!(s)) LOGE ("## %s assert %s failed at line:%d ##",__FUNCTION__, #s, __LINE__) + + + + +/******************************************************************************* +** +** Function bta_pan_co_init +** +** Description +** +** +** Returns Data flow mask. +** +*******************************************************************************/ +UINT8 bta_pan_co_init(UINT8 *q_level) +{ + + LOGD("bta_pan_co_init"); + + /* set the q_level to 30 buffers */ + *q_level = 30; + + //return (BTA_PAN_RX_PULL | BTA_PAN_TX_PULL); + return (BTA_PAN_RX_PUSH_BUF | BTA_PAN_RX_PUSH | BTA_PAN_TX_PULL); +} + + + + +/******************************************************************************* +** +** Function bta_pan_co_open +** +** Description +** +** +** +** +** +** Returns void +** +*******************************************************************************/ + +void bta_pan_co_open(UINT16 handle, UINT8 app_id, tBTA_PAN_ROLE local_role, tBTA_PAN_ROLE peer_role, BD_ADDR peer_addr) +{ + LOGD("bta_pan_co_open:app_id:%d, local_role:%d, peer_role:%d, handle:%d", + app_id, local_role, peer_role, handle); + btpan_conn_t* conn = btpan_find_conn_addr(peer_addr); + if(conn == NULL) + conn = btpan_new_conn(handle, peer_addr, local_role, peer_role); + if(conn) + { + LOGD("bta_pan_co_open:tap_fd:%d, open_count:%d, conn->handle:%d should = handle:%d, local_role:%d, remote_role:%d", + btpan_cb.tap_fd, btpan_cb.open_count, conn->handle, handle, conn->local_role, conn->remote_role); + //refresh the role & bt address + + btpan_cb.open_count++; + conn->handle = handle; + //bdcpy(conn->peer, peer_addr); + if(btpan_cb.tap_fd < 0) + { + btpan_cb.tap_fd = btpan_tap_open(); + if(btpan_cb.tap_fd >= 0) + create_tap_read_thread(btpan_cb.tap_fd); + } + if(btpan_cb.tap_fd >= 0) + { + conn->state = PAN_STATE_OPEN; + bta_pan_ci_rx_ready(handle); + } + } +} + + +/******************************************************************************* +** +** Function bta_pan_co_close +** +** Description This function is called by PAN when a connection to a +** peer is closed. +** +** +** Returns void +** +*******************************************************************************/ +void bta_pan_co_close(UINT16 handle, UINT8 app_id) +{ + LOGD("bta_pan_co_close:app_id:%d, handle:%d", app_id, handle); + btpan_conn_t* conn = btpan_find_conn_handle(handle); + if(conn && conn->state == PAN_STATE_OPEN) + { + LOGD("bta_pan_co_close"); + + // let bta close event reset this handle as it needs + // the handle to find the connection upon CLOSE + //conn->handle = -1; + conn->state = PAN_STATE_CLOSE; + btpan_cb.open_count--; + + if(btpan_cb.open_count == 0) + { + destroy_tap_read_thread(); + btpan_tap_close(btpan_cb.tap_fd); + btpan_cb.tap_fd = -1; + } + } +} + +/******************************************************************************* +** +** Function bta_pan_co_tx_path +** +** Description This function is called by PAN to transfer data on the +** TX path; that is, data being sent from BTA to the phone. +** This function is used when the TX data path is configured +** to use the pull interface. The implementation of this +** function will typically call Bluetooth stack functions +** PORT_Read() or PORT_ReadData() to read data from RFCOMM +** and then a platform-specific function to send data that +** data to the phone. +** +** +** Returns void +** +*******************************************************************************/ +void bta_pan_co_tx_path(UINT16 handle, UINT8 app_id) +{ + BT_HDR *p_buf; + UINT8 i; + BD_ADDR src; + BD_ADDR dst; + UINT16 protocol; + BOOLEAN ext; + BOOLEAN forward; + + LOGD("bta_pan_co_tx_path, handle:%d, app_id:%d", handle, app_id); + + btpan_conn_t* conn = btpan_find_conn_handle(handle); + if(conn && conn->state != PAN_STATE_OPEN) + { + LOGE("bta_pan_co_tx_path: cannot find pan connction or conn is not opened, conn:%p, conn->state:%d", conn, conn->state); + return; + } + do + { + + /* read next data buffer from pan */ + if ((p_buf = bta_pan_ci_readbuf(handle, src, dst, &protocol, + &ext, &forward))) + { + LOGD("bta_pan_co_tx_path, calling btapp_tap_send, p_buf->len:%d, offset:%d", p_buf->len, p_buf->offset); + if(is_empty_eth_addr(conn->eth_addr) && is_valid_bt_eth_addr(src)) + { + LOGD("pan bt peer addr: %02x:%02x:%02x:%02x:%02x:%02x, update its ethernet addr: %02x:%02x:%02x:%02x:%02x:%02x", + conn->peer[0], conn->peer[1], conn->peer[2], conn->peer[3],conn->peer[4], conn->peer[5], + src[0], src[1], src[2], src[3],src[4], src[5]); + memcpy(conn->eth_addr, src, sizeof(conn->eth_addr)); + + } + btpan_tap_send(btpan_cb.tap_fd, src, dst, protocol, (char*)(p_buf + 1) + p_buf->offset, p_buf->len, ext, forward); + GKI_freebuf(p_buf); + } + + } while (p_buf != NULL); + +} + +/******************************************************************************* +** +** Function bta_pan_co_rx_path +** +** Description +** +** +** +** +** Returns void +** +*******************************************************************************/ +void bta_pan_co_rx_path(UINT16 handle, UINT8 app_id) +{ + + + UINT8 i; + + LOGD("bta_pan_co_rx_path not used"); + + +} + +/******************************************************************************* +** +** Function bta_pan_co_tx_write +** +** Description This function is called by PAN to send data to the phone +** when the TX path is configured to use a push interface. +** The implementation of this function must copy the data to +** the phone's memory. +** +** +** Returns void +** +*******************************************************************************/ +void bta_pan_co_tx_write(UINT16 handle, UINT8 app_id, BD_ADDR src, BD_ADDR dst, UINT16 protocol, UINT8 *p_data, + UINT16 len, BOOLEAN ext, BOOLEAN forward) +{ + LOGD("bta_pan_co_tx_write not used"); + +} + +/******************************************************************************* +** +** Function bta_pan_co_tx_writebuf +** +** Description This function is called by PAN to send data to the phone +** when the TX path is configured to use a push interface with +** zero copy. The phone must free the buffer using function +** GKI_freebuf() when it is through processing the buffer. +** +** +** Returns TRUE if flow enabled +** +*******************************************************************************/ +void bta_pan_co_tx_writebuf(UINT16 handle, UINT8 app_id, BD_ADDR src, BD_ADDR dst, UINT16 protocol, BT_HDR *p_buf, + BOOLEAN ext, BOOLEAN forward) +{ + + LOGD("bta_pan_co_tx_writebuf not used"); + + +} + +/******************************************************************************* +** +** Function bta_pan_co_rx_flow +** +** Description This function is called by PAN to enable or disable +** data flow on the RX path when it is configured to use +** a push interface. If data flow is disabled the phone must +** not call bta_pan_ci_rx_write() or bta_pan_ci_rx_writebuf() +** until data flow is enabled again. +** +** +** Returns void +** +*******************************************************************************/ +void bta_pan_co_rx_flow(UINT16 handle, UINT8 app_id, BOOLEAN enable) +{ + + LOGD("bta_pan_co_rx_flow, enabled:%d, not used", enable); + +} + + +/******************************************************************************* +** +** Function bta_pan_co_filt_ind +** +** Description protocol filter indication from peer device +** +** Returns void +** +*******************************************************************************/ +void bta_pan_co_pfilt_ind(UINT16 handle, BOOLEAN indication, tBTA_PAN_STATUS result, + UINT16 len, UINT8 *p_filters) +{ + LOGD("bta_pan_co_pfilt_ind"); + +} +/******************************************************************************* +** +** Function bta_pan_co_mfilt_ind +** +** Description multicast filter indication from peer device +** +** Returns void +** +*******************************************************************************/ +void bta_pan_co_mfilt_ind(UINT16 handle, BOOLEAN indication, tBTA_PAN_STATUS result, + UINT16 len, UINT8 *p_filters) +{ + + LOGD("bta_pan_co_mfilt_ind"); +} + |