diff options
Diffstat (limited to 'btif/include/btif_hl.h')
| -rwxr-xr-x | btif/include/btif_hl.h | 334 |
1 files changed, 334 insertions, 0 deletions
diff --git a/btif/include/btif_hl.h b/btif/include/btif_hl.h new file mode 100755 index 0000000..2328609 --- /dev/null +++ b/btif/include/btif_hl.h @@ -0,0 +1,334 @@ +/************************************************************************************ + * + * Copyright (C) 2009-2012 Broadcom Corporation + * + * This program is the proprietary software of Broadcom Corporation and/or its + * licensors, and may only be used, duplicated, modified or distributed + * pursuant to the terms and conditions of a separate, written license + * agreement executed between you and Broadcom (an "Authorized License"). + * Except as set forth in an Authorized License, Broadcom grants no license + * (express or implied), right to use, or waiver of any kind with respect to + * the Software, and Broadcom expressly reserves all rights in and to the + * Software and all intellectual property rights therein. + * IF YOU HAVE NO AUTHORIZED LICENSE, THEN YOU HAVE NO RIGHT TO USE THIS + * SOFTWARE IN ANY WAY, AND SHOULD IMMEDIATELY NOTIFY BROADCOM AND DISCONTINUE + * ALL USE OF THE SOFTWARE. + * + * Except as expressly set forth in the Authorized License, + * + * 1. This program, including its structure, sequence and organization, + * constitutes the valuable trade secrets of Broadcom, and you shall + * use all reasonable efforts to protect the confidentiality thereof, + * and to use this information only in connection with your use of + * Broadcom integrated circuit products. + * + * 2. TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED + * "AS IS" AND WITH ALL FAULTS AND BROADCOM MAKES NO PROMISES, + * REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, + * OR OTHERWISE, WITH RESPECT TO THE SOFTWARE. BROADCOM SPECIFICALLY + * DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, + * NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES, + * ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR + * CORRESPONDENCE TO DESCRIPTION. YOU ASSUME THE ENTIRE RISK ARISING OUT + * OF USE OR PERFORMANCE OF THE SOFTWARE. + * + * 3. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL BROADCOM OR + * ITS LICENSORS BE LIABLE FOR + * (i) CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR EXEMPLARY + * DAMAGES WHATSOEVER ARISING OUT OF OR IN ANY WAY RELATING TO + * YOUR USE OF OR INABILITY TO USE THE SOFTWARE EVEN IF BROADCOM + * HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES; OR + * (ii) ANY AMOUNT IN EXCESS OF THE AMOUNT ACTUALLY PAID FOR THE + * SOFTWARE ITSELF OR U.S. $1, WHICHEVER IS GREATER. THESE + * LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF + * ESSENTIAL PURPOSE OF ANY LIMITED REMEDY. + * + ************************************************************************************/ + +/************************************************************************************ + * + * Filename: btif_hl.h + * + * Description: + * + ***********************************************************************************/ + +#ifndef BTIF_HL_H +#define BTIF_HL_H + +/************************************************************************************ +** Functions +************************************************************************************/ + + +#define BTIF_HL_DATA_TYPE_NONE 0x0000 +#define BTIF_HL_DATA_TYPE_PULSE_OXIMETER 0x1004 /* from BT assigned number */ +#define BTIF_HL_DATA_TYPE_BLOOD_PRESSURE_MON 0x1007 +#define BTIF_HL_DATA_TYPE_BODY_THERMOMETER 0x1008 +#define BTIF_HL_DATA_TYPE_BODY_WEIGHT_SCALE 0x100F +#define BTIF_HL_DATA_TYPE_GLUCOSE_METER 0x1011 +#define BTIF_HL_DATA_TYPE_STEP_COUNTER 0x1068 + +#define BTIF_HL_CCH_NUM_FILTER_ELEMS 3 +#define BTIF_HL_APPLICATION_NAME_LEN 512 + + +typedef enum +{ + BTIF_HL_SOC_STATE_IDLE, + BTIF_HL_SOC_STATE_W4_ADD, + BTIF_HL_SOC_STATE_W4_CONN, + BTIF_HL_SOC_STATE_W4_READ, + BTIF_HL_SOC_STATE_W4_REL +} btif_hl_soc_state_t; + +typedef struct +{ + int channel_id; + BD_ADDR bd_addr; + UINT8 mdep_cfg_idx; + int max_s; + int socket_id[2]; + UINT8 app_idx; + UINT8 mcl_idx; + UINT8 mdl_idx; + btif_hl_soc_state_t state; +}btif_hl_soc_cb_t; + +typedef struct +{ + UINT16 data_type; + UINT16 max_tx_apdu_size; + UINT16 max_rx_apdu_size; +} btif_hl_data_type_cfg_t; + +typedef enum +{ + BTIF_HL_STATE_DISABLED, + BTIF_HL_STATE_DISABLING, + BTIF_HL_STATE_ENABLED, + BTIF_HL_STATE_ENABLING, + +}btif_hl_state_t; + +typedef enum +{ + BTIF_HL_CCH_OP_NONE, + BTIF_HL_CCH_OP_MDEP_FILTERING, + BTIF_HL_CCH_OP_MATCHED_CTRL_PSM, + BTIF_HL_CCH_OP_DCH_OPEN, + BTIF_HL_CCH_OP_DCH_RECONNECT, + BTIF_HL_CCH_OP_DCH_ECHO_TEST +}btif_hl_cch_op_t; + +typedef enum +{ + BTIF_HL_PEND_DCH_OP_NONE, + BTIF_HL_PEND_DCH_OP_DELETE_MDL, + BTIF_HL_PEND_DCH_OP_OPEN, + BTIF_HL_PEND_DCH_OP_RECONNECT +} btif_hl_pend_dch_op_t; + +typedef enum +{ + BTIF_HL_DCH_OP_NONE, + BTIF_HL_DCH_OP_DISC +} btif_hl_dch_op_t; + + +typedef struct +{ + UINT16 data_type; + tBTA_HL_MDEP_ROLE peer_mdep_role; +} btif_hl_filter_elem_t; + + +typedef struct +{ + UINT8 num_elems; + btif_hl_filter_elem_t elem[BTIF_HL_CCH_NUM_FILTER_ELEMS]; +} btif_hl_cch_filter_t; + +typedef struct +{ + BOOLEAN in_use; + UINT16 mdl_id; + tBTA_HL_MDL_HANDLE mdl_handle; + btif_hl_dch_op_t dch_oper; + tBTA_HL_MDEP_ID local_mdep_id; + UINT8 local_mdep_cfg_idx; + tBTA_HL_DCH_CFG local_cfg; + tBTA_HL_MDEP_ID peer_mdep_id; + UINT16 peer_data_type; + tBTA_HL_MDEP_ROLE peer_mdep_role; + tBTA_HL_DCH_MODE dch_mode; + tBTA_SEC sec_mask; + BOOLEAN is_the_first_reliable; + BOOLEAN delete_mdl; + UINT16 mtu; + tMCA_CHNL_CFG chnl_cfg; + UINT16 tx_size; + UINT8 *p_tx_pkt; + UINT8 *p_rx_pkt; + BOOLEAN cong; + btif_hl_soc_cb_t *p_scb; + int channel_id; +}btif_hl_mdl_cb_t; + +typedef enum +{ + BTIF_HL_CHAN_CB_STATE_NONE, + BTIF_HL_CHAN_CB_STATE_CONNECTING_PENDING, + BTIF_HL_CHAN_CB_STATE_CONNECTED_PENDING, + + BTIF_HL_CHAN_CB_STATE_DISCONNECTING_PENDING, + BTIF_HL_CHAN_CB_STATE_DISCONNECTED_PENDING, + BTIF_HL_CHAN_CB_STATE_DESTROYED_PENDING, +}btif_hl_chan_cb_state_t; +typedef struct +{ + int channel_id; + int mdep_cfg_idx; + BOOLEAN in_use; + btif_hl_chan_cb_state_t cb_state; + btif_hl_pend_dch_op_t op; + BD_ADDR bd_addr; +}btif_hl_pending_chan_cb_t; + +typedef struct +{ + btif_hl_mdl_cb_t mdl[BTA_HL_NUM_MDLS_PER_MCL]; + BOOLEAN in_use; + BOOLEAN is_connected; + UINT16 req_ctrl_psm; + UINT16 ctrl_psm; + UINT16 data_psm; + BD_ADDR bd_addr; + UINT16 cch_mtu; + tBTA_SEC sec_mask; + tBTA_HL_MCL_HANDLE mcl_handle; + btif_hl_pending_chan_cb_t pcb; + + + BOOLEAN valid_sdp_idx; + UINT8 sdp_idx; + + tBTA_HL_SDP sdp; + btif_hl_cch_op_t cch_oper; +}btif_hl_mcl_cb_t; + +typedef struct +{ + UINT8 mdep_cfg_idx; + int data_type; + int channel_id; + UINT8 app_idx; + BOOLEAN app_active; + //UINT8 app_nv_idx; /* one base */ +} btif_hl_extra_mdl_cfg_t; + + +typedef struct +{ + tBTA_HL_MDL_CFG base; + btif_hl_extra_mdl_cfg_t extra; +} btif_hl_mdl_cfg_t; + +typedef struct +{ + BOOLEAN active; + UINT16 mdl_id; + UINT8 mdep_cfg_idx; + BD_ADDR bd_addr; + int channel_id; +} btif_hl_delete_mdl_t; + +typedef struct +{ + btif_hl_mcl_cb_t mcb[BTA_HL_NUM_MCLS]; /* application Control Blocks */ + BOOLEAN in_use; /* this CB is in use*/ + UINT8 app_id; + //UINT32 sdp_handle; /* SDP record handle */ + tBTA_HL_SUP_FEATURE sup_feature; + tBTA_HL_DCH_CFG channel_type[BTA_HL_NUM_MDEPS]; + tBTA_HL_SDP_INFO_IND sdp_info_ind; + btif_hl_cch_filter_t filter; + + btif_hl_mdl_cfg_t mdl_cfg[BTA_HL_NUM_MDL_CFGS]; + + btif_hl_delete_mdl_t delete_mdl; + tBTA_HL_DEVICE_TYPE dev_type; + tBTA_HL_APP_HANDLE app_handle; + + //UINT16 data_mtu; /* L2CAP MTU of the MCAP data channel */ + UINT16 sec_mask; /* Security mask for BTM_SetSecurityLevel() */ + + + char srv_name[BTA_SERVICE_NAME_LEN +1]; /* service name to be used in the SDP; null terminated*/ + char srv_desp[BTA_SERVICE_DESP_LEN +1]; /* service description to be used in the SDP; null terminated */ + char provider_name[BTA_PROVIDER_NAME_LEN +1]; /* provide name to be used in the SDP; null terminated */ + char application_name[BTIF_HL_APPLICATION_NAME_LEN +1]; /* applicaiton name */ + +}btif_hl_app_cb_t; +typedef struct +{ + BOOLEAN in_use; + UINT8 app_idx; +}btif_hl_pending_reg_cb_t; + +/* BTIF-HL control block */ +typedef struct +{ + btif_hl_app_cb_t acb[BTA_HL_NUM_APPS]; /* HL Control Blocks */ + btif_hl_pending_reg_cb_t pcb[BTA_HL_NUM_APPS]; + tBTA_HL_CTRL_CBACK *p_ctrl_cback; /* pointer to control callback function */ + UINT8 next_app_id; + UINT16 next_channel_id; + btif_hl_state_t state; + +} btif_hl_cb_t; + + +enum +{ + BTIF_HL_SEND_CONNECTED_CB, + BTIF_HL_SEND_DISCONNECTED_CB, +}; +typedef UINT8 btif_hl_evt_t; + +typedef struct +{ + int app_id; + BD_ADDR bd_addr; + int mdep_cfg_index; + int channel_id; + btif_hl_chan_cb_state_t cb_state; + int fd; +}btif_hl_send_chan_state_cb_t; + +extern btif_hl_cb_t btif_hl_cb; +extern btif_hl_cb_t *p_btif_hl_cb; + +#define BTIF_HL_GET_CB_PTR() &(btif_hl_cb) +#define BTIF_HL_GET_APP_CB_PTR(app_idx) &(btif_hl_cb.acb[(app_idx)]) +#define BTIF_HL_GET_MCL_CB_PTR(app_idx, mcl_idx) &(btif_hl_cb.acb[(app_idx)].mcb[(mcl_idx)]) +#define BTIF_HL_GET_MDL_CB_PTR(app_idx, mcl_idx, mdl_idx) &(btif_hl_cb.acb[(app_idx)].mcb[(mcl_idx)].mdl[mdl_idx]) +#define BTIF_HL_GET_PCB_PTR(app_idx, mcl_idx) &(btif_hl_cb.acb[app_idx].mcb[mcl_idx].pcb) +#define BTIF_HL_GET_MDL_CFG_PTR(app_idx, item_idx) &(btif_hl_cb.acb[(app_idx)].mdl_cfg[(item_idx)]) +extern BOOLEAN btif_hl_find_mcl_idx(UINT8 app_idx, BD_ADDR p_bd_addr, UINT8 *p_mcl_idx); +extern BOOLEAN btif_hl_find_app_idx(UINT8 app_id, UINT8 *p_app_idx); +extern BOOLEAN btif_hl_find_avail_mcl_idx(UINT8 app_idx, UINT8 *p_mcl_idx); +extern BOOLEAN btif_hl_find_avail_mdl_idx(UINT8 app_idx, UINT8 mcl_idx, + UINT8 *p_mdl_idx); +extern BOOLEAN btif_hl_find_mcl_idx_using_handle( tBTA_HL_MCL_HANDLE mcl_handle, + UINT8 *p_app_idx, UINT8 *p_mcl_idx); +extern BOOLEAN btif_hl_save_mdl_cfg(UINT8 app_id, UINT8 item_idx, tBTA_HL_MDL_CFG *p_mdl_cfg); +extern BOOLEAN btif_hl_delete_mdl_cfg(UINT8 app_id, UINT8 item_idx); +extern void * btif_hl_get_buf(UINT16 size); +extern void btif_hl_free_buf(void **p); +extern BOOLEAN btif_hl_find_mdl_idx_using_handle(tBTA_HL_MDL_HANDLE mdl_handle, + UINT8 *p_app_idx,UINT8 *p_mcl_idx, + UINT8 *p_mdl_idx); +extern void btif_hl_abort_pending_chan_setup(UINT8 app_idx, UINT8 mcl_idx); +extern BOOLEAN btif_hl_proc_pending_op(UINT8 app_idx, UINT8 mcl_idx); +#endif |