diff options
Diffstat (limited to 'stack/btm/btm_int.h')
| -rw-r--r-- | stack/btm/btm_int.h | 1114 |
1 files changed, 1114 insertions, 0 deletions
diff --git a/stack/btm/btm_int.h b/stack/btm/btm_int.h new file mode 100644 index 0000000..e5f4c15 --- /dev/null +++ b/stack/btm/btm_int.h @@ -0,0 +1,1114 @@ +/****************************************************************************** + * + * Copyright (C) 1999-2012 Broadcom Corporation + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +/****************************************************************************** + * + * this file contains the main Bluetooth Manager (BTM) internal + * definitions. + * + ******************************************************************************/ +#ifndef BTM_INT_H +#define BTM_INT_H + +#include "bt_target.h" +#include "gki.h" +#include "hcidefs.h" + +#if RFCOMM_INCLUDED == TRUE +#include "rfcdefs.h" +#endif + +#include "btm_api.h" + +#if (BLE_INCLUDED == TRUE) +#include "btm_ble_int.h" +#if (SMP_INCLUDED == TRUE) +#include "smp_api.h" +#endif +#endif + +#if BTM_MAX_LOC_BD_NAME_LEN > 0 +typedef char tBTM_LOC_BD_NAME[BTM_MAX_LOC_BD_NAME_LEN + 1]; +#endif + +#define BTM_ACL_IS_CONNECTED(bda) (btm_bda_to_acl (bda) != NULL) + +/* Definitions for Server Channel Number (SCN) management +*/ +#define BTM_MAX_SCN PORT_MAX_RFC_PORTS + +/* Define masks for supported and exception 2.0 ACL packet types +*/ +#define BTM_ACL_SUPPORTED_PKTS_MASK (HCI_PKT_TYPES_MASK_DM1 | \ + HCI_PKT_TYPES_MASK_DH1 | \ + HCI_PKT_TYPES_MASK_DM3 | \ + HCI_PKT_TYPES_MASK_DH3 | \ + HCI_PKT_TYPES_MASK_DM5 | \ + HCI_PKT_TYPES_MASK_DH5) + +#define BTM_ACL_EXCEPTION_PKTS_MASK (HCI_PKT_TYPES_MASK_NO_2_DH1 | \ + HCI_PKT_TYPES_MASK_NO_3_DH1 | \ + HCI_PKT_TYPES_MASK_NO_2_DH3 | \ + HCI_PKT_TYPES_MASK_NO_3_DH3 | \ + HCI_PKT_TYPES_MASK_NO_2_DH5 | \ + HCI_PKT_TYPES_MASK_NO_3_DH5) + +#define BTM_EPR_AVAILABLE(p) ((HCI_ATOMIC_ENCRYPT_SUPPORTED((p)->features) && \ + HCI_ATOMIC_ENCRYPT_SUPPORTED(btm_cb.devcb.local_features)) \ + ? TRUE : FALSE) + +#define BTM_IS_BRCM_CONTROLLER() (btm_cb.devcb.local_version.manufacturer == LMP_COMPID_BROADCOM) + + +/* Define the ACL Management control structure +*/ +typedef struct +{ + UINT16 hci_handle; + UINT16 pkt_types_mask; + UINT16 restore_pkt_types; /* when coming in/out of SCO connection restore the packet types */ + UINT16 clock_offset; + BD_ADDR remote_addr; + DEV_CLASS remote_dc; + BD_NAME remote_name; + + UINT16 manufacturer; + UINT16 lmp_subversion; + UINT16 link_super_tout; + BD_FEATURES features; /* Features suported by the device */ + UINT8 lmp_version; + + BOOLEAN in_use; + UINT8 link_role; + BOOLEAN link_up_issued; /* True if busy_level link up has been issued */ + +#define BTM_ACL_SWKEY_STATE_IDLE 0 +#define BTM_ACL_SWKEY_STATE_MODE_CHANGE 1 +#define BTM_ACL_SWKEY_STATE_ENCRYPTION_OFF 2 +#define BTM_ACL_SWKEY_STATE_SWITCHING 3 +#define BTM_ACL_SWKEY_STATE_ENCRYPTION_ON 4 +#define BTM_ACL_SWKEY_STATE_IN_PROGRESS 5 + UINT8 switch_role_state; + UINT8 change_key_state; + +#define BTM_ACL_ENCRYPT_STATE_IDLE 0 +#define BTM_ACL_ENCRYPT_STATE_ENCRYPT_OFF 1 /* encryption turning off */ +#define BTM_ACL_ENCRYPT_STATE_TEMP_FUNC 2 /* temporarily off for change link key or role switch */ +#define BTM_ACL_ENCRYPT_STATE_ENCRYPT_ON 3 /* encryption turning on */ + UINT8 encrypt_state; /* overall BTM encryption state */ + +#if BTM_PWR_MGR_INCLUDED == FALSE + UINT8 mode; +#endif /* BTM_PWR_MGR_INCLUDED */ +#if BLE_INCLUDED == TRUE + UINT8 is_le_link; +#endif + +} tACL_CONN; + +/***************************************************** +** TIMER Definitions +******************************************************/ +#define TT_DEV_RESET 1 +#define TT_DEV_RLN 2 +#define TT_DEV_RLNKP 4 /* Read Link Policy Settings */ + +/* Define the Device Management control structure +*/ +typedef struct +{ + tBTM_DEV_STATUS_CB *p_dev_status_cb; /* Device status change callback */ + tBTM_VS_EVT_CB *p_vend_spec_cb[BTM_MAX_VSE_CALLBACKS]; /* Register for vendor specific events */ + + tBTM_CMPL_CB *p_stored_link_key_cmpl_cb; /* Read/Write/Delete stored link key */ + + TIMER_LIST_ENT reset_timer; + tBTM_CMPL_CB *p_reset_cmpl_cb; /* Callback function to be called */ + /* when startup of the device is done */ + TIMER_LIST_ENT rln_timer; + tBTM_CMPL_CB *p_rln_cmpl_cb; /* Callback function to be called when */ + /* read local name function complete */ + TIMER_LIST_ENT rlinkp_timer; + tBTM_CMPL_CB *p_rlinkp_cmpl_cb; /* Callback function to be called when */ + /* read link policy function completes */ + TIMER_LIST_ENT rssi_timer; + tBTM_CMPL_CB *p_rssi_cmpl_cb; /* Callback function to be called when */ + /* read rssi function completes */ + TIMER_LIST_ENT lnk_quality_timer; + tBTM_CMPL_CB *p_lnk_qual_cmpl_cb;/* Callback function to be called when */ + /* read link quality function completes */ + TIMER_LIST_ENT txpwer_timer; + tBTM_CMPL_CB *p_txpwer_cmpl_cb; /* Callback function to be called when */ + /* read inq tx power function completes */ + + TIMER_LIST_ENT qossu_timer; + tBTM_CMPL_CB *p_qossu_cmpl_cb; /* Callback function to be called when */ + /* qos setup function completes */ + + tBTM_ROLE_SWITCH_CMPL switch_role_ref_data; + tBTM_CMPL_CB *p_switch_role_cb; /* Callback function to be called when */ + /* requested switch role is completed */ + + tBTM_CHANGE_KEY_CMPL chg_link_key_ref_data; + tBTM_CMPL_CB *p_chg_link_key_cb; /* Callback function to be called when */ + /* change of link key is completed */ + + TIMER_LIST_ENT tx_power_timer; + tBTM_CMPL_CB *p_tx_power_cmpl_cb; /* Callback function to be called */ + + BD_ADDR local_addr; /* BD_ADDR of the local device */ + tBTM_VERSION_INFO local_version; /* Local Version Information */ + BD_FEATURES local_features; /* Local features bit mask */ + DEV_CLASS dev_class; /* Local device class */ +#if BLE_INCLUDED == TRUE + BD_ADDR read_tx_pwr_addr; /* read TX power target address */ + + tBTM_BLE_LOCAL_ID_KEYS id_keys; /* local BLE ID keys */ + BT_OCTET16 er; /* BLE encryption key */ + +#if BTM_BLE_CONFORMANCE_TESTING == TRUE + BOOLEAN no_disc_if_pair_fail; + BOOLEAN enable_test_mac_val; + BT_OCTET8 test_mac; + BOOLEAN enable_test_local_sign_cntr; + UINT32 test_local_sign_cntr; +#endif + + +#endif /* BLE_INCLUDED */ + +#define BTM_DEV_STATE_WAIT_RESET_CMPLT 0 +#define BTM_DEV_STATE_WAIT_AFTER_RESET 1 +#define BTM_DEV_STATE_READY 2 + + UINT8 state; + tBTM_IO_CAP loc_io_caps; /* IO capability of the local device */ + BOOLEAN loc_auth_req; /* the auth_req flag */ + BD_FEATURES brcm_features; /* Broadcom specific features bit mask */ +} tBTM_DEVCB; + + +/* Define the structures and constants used for inquiry +*/ + +/* Definitions of limits for inquiries */ +#define BTM_PER_INQ_MIN_MAX_PERIOD HCI_PER_INQ_MIN_MAX_PERIOD +#define BTM_PER_INQ_MAX_MAX_PERIOD HCI_PER_INQ_MAX_MAX_PERIOD +#define BTM_PER_INQ_MIN_MIN_PERIOD HCI_PER_INQ_MIN_MIN_PERIOD +#define BTM_PER_INQ_MAX_MIN_PERIOD HCI_PER_INQ_MAX_MIN_PERIOD +#define BTM_MAX_INQUIRY_LENGTH HCI_MAX_INQUIRY_LENGTH +#define BTM_MIN_INQUIRY_LEN 0x01 + +#define BTM_MIN_INQ_TX_POWER -70 +#define BTM_MAX_INQ_TX_POWER 20 + +#if BTM_USE_INQ_RESULTS_FILTER == TRUE +typedef struct +{ + UINT32 inq_count; /* Used for determining if a response has already been */ + /* received for the current inquiry operation. (We do not */ + /* want to flood the caller with multiple responses from */ + /* the same device. */ + BD_ADDR bd_addr; +} tINQ_BDADDR; +#endif + +typedef struct +{ + UINT32 time_of_resp; + UINT32 inq_count; /* "timestamps" the entry with a particular inquiry count */ + /* Used for determining if a response has already been */ + /* received for the current inquiry operation. (We do not */ + /* want to flood the caller with multiple responses from */ + /* the same device. */ + tBTM_INQ_INFO inq_info; + BOOLEAN in_use; + +#if (BLE_INCLUDED == TRUE) + BOOLEAN scan_rsp; +#endif +} tINQ_DB_ENT; + + +typedef struct +{ + tBTM_CMPL_CB *p_remname_cmpl_cb; + +#define BTM_EXT_RMT_NAME_TIMEOUT 40 + + + TIMER_LIST_ENT rmt_name_timer_ent; + + UINT16 discoverable_mode; + UINT16 connectable_mode; + UINT16 page_scan_window; + UINT16 page_scan_period; + UINT16 inq_scan_window; + UINT16 inq_scan_period; + UINT16 inq_scan_type; + UINT16 page_scan_type; /* current page scan type */ + + BD_ADDR remname_bda; /* Name of bd addr for active remote name request */ +#define BTM_RMT_NAME_INACTIVE 0 +#define BTM_RMT_NAME_EXT 0x1 /* Initiated through API */ +#define BTM_RMT_NAME_SEC 0x2 /* Initiated internally by security manager */ +#define BTM_RMT_NAME_INQ 0x4 /* Remote name initiated internally by inquiry */ + BOOLEAN remname_active; /* State of a remote name request by external API */ + + tBTM_CMPL_CB *p_inq_cmpl_cb; + tBTM_INQ_RESULTS_CB *p_inq_results_cb; + tBTM_CMPL_CB *p_inqfilter_cmpl_cb; /* Called (if not NULL) after inquiry filter completed */ + tBTM_INQ_DB_CHANGE_CB *p_inq_change_cb; /* Inquiry database changed callback */ + UINT32 inq_counter; /* Counter incremented each time an inquiry completes */ + /* Used for determining whether or not duplicate devices */ + /* have responded to the same inquiry */ + TIMER_LIST_ENT inq_timer_ent; +#if BTM_USE_INQ_RESULTS_FILTER == TRUE + tINQ_BDADDR *p_bd_db; /* Pointer to memory that holds bdaddrs */ + UINT16 num_bd_entries; /* Number of entries in database */ + UINT16 max_bd_entries; /* Maximum number of entries that can be stored */ +#endif + tINQ_DB_ENT inq_db[BTM_INQ_DB_SIZE]; + tBTM_INQ_PARMS inqparms; /* Contains the parameters for the current inquiry */ + tBTM_INQUIRY_CMPL inq_cmpl_info; /* Status and number of responses from the last inquiry */ + + UINT16 per_min_delay; /* Current periodic minimum delay */ + UINT16 per_max_delay; /* Current periodic maximum delay */ + BOOLEAN inqfilt_active; + UINT8 pending_filt_complete_event; /* to take care of btm_event_filter_complete corresponding to */ + /* inquiry that has been cancelled*/ + UINT8 inqfilt_type; /* Contains the inquiry filter type (BD ADDR, COD, or Clear) */ + +#define BTM_INQ_INACTIVE_STATE 0 +#define BTM_INQ_CLR_FILT_STATE 1 /* Currently clearing the inquiry filter preceeding the inquiry request */ + /* (bypassed if filtering is not used) */ +#define BTM_INQ_SET_FILT_STATE 2 /* Sets the new filter (or turns off filtering) in this state */ +#define BTM_INQ_ACTIVE_STATE 3 /* Actual inquiry or periodic inquiry is in progress */ +#define BTM_INQ_REMNAME_STATE 4 /* Remote name requests are active */ + + UINT8 state; /* Current state that the inquiry process is in */ + UINT8 inq_active; /* Bit Mask indicating type of inquiry is active */ + BOOLEAN no_inc_ssp; /* TRUE, to stop inquiry on incoming SSP */ +} tBTM_INQUIRY_VAR_ST; + +/* The MSB of the clock offset field indicates that the offset is valid if TRUE */ +#define BTM_CLOCK_OFFSET_VALID 0x8000 + +/* Define the structures needed by security management +*/ + +#define BTM_SEC_INVALID_HANDLE 0xFFFF + +typedef UINT8 *BTM_BD_NAME_PTR; /* Pointer to Device name */ + +/* Security callback is called by this unit when security +** procedures are completed. Parameters are +** BD Address of remote +** Result of the operation +*/ +typedef tBTM_SEC_CBACK tBTM_SEC_CALLBACK; + +typedef void (tBTM_SCO_IND_CBACK) (UINT16 sco_inx) ; + +/* MACROs to convert from SCO packet types mask to ESCO and back */ +#define BTM_SCO_PKT_TYPE_MASK ( HCI_PKT_TYPES_MASK_HV1 \ + | HCI_PKT_TYPES_MASK_HV2 \ + | HCI_PKT_TYPES_MASK_HV3) + +/* Mask defining only the SCO types of an esco packet type */ +#define BTM_ESCO_PKT_TYPE_MASK ( HCI_ESCO_PKT_TYPES_MASK_HV1 \ + | HCI_ESCO_PKT_TYPES_MASK_HV2 \ + | HCI_ESCO_PKT_TYPES_MASK_HV3) + +#define BTM_SCO_2_ESCO(scotype) ((UINT16)(((scotype) & BTM_SCO_PKT_TYPE_MASK) >> 5)) +#define BTM_ESCO_2_SCO(escotype) ((UINT16)(((escotype) & BTM_ESCO_PKT_TYPE_MASK) << 5)) + +/* Define masks for supported and exception 2.0 SCO packet types +*/ +#define BTM_SCO_SUPPORTED_PKTS_MASK (HCI_ESCO_PKT_TYPES_MASK_HV1 | \ + HCI_ESCO_PKT_TYPES_MASK_HV2 | \ + HCI_ESCO_PKT_TYPES_MASK_HV3 | \ + HCI_ESCO_PKT_TYPES_MASK_EV3 | \ + HCI_ESCO_PKT_TYPES_MASK_EV4 | \ + HCI_ESCO_PKT_TYPES_MASK_EV5) + +#define BTM_SCO_EXCEPTION_PKTS_MASK (HCI_ESCO_PKT_TYPES_MASK_NO_2_EV3 | \ + HCI_ESCO_PKT_TYPES_MASK_NO_3_EV3 | \ + HCI_ESCO_PKT_TYPES_MASK_NO_2_EV5 | \ + HCI_ESCO_PKT_TYPES_MASK_NO_3_EV5) + + +#define BTM_SCO_ROUTE_UNKNOWN 0xff + +/* Define the structure that contains (e)SCO data */ +typedef struct +{ + tBTM_ESCO_CBACK *p_esco_cback; /* Callback for eSCO events */ + tBTM_ESCO_PARAMS setup; + tBTM_ESCO_DATA data; /* Connection complete information */ + UINT8 hci_status; +} tBTM_ESCO_INFO; + +/* Define the structure used for SCO Management +*/ +typedef struct +{ + tBTM_ESCO_INFO esco; /* Current settings */ +#if BTM_SCO_HCI_INCLUDED == TRUE + BUFFER_Q xmit_data_q; /* SCO data transmitting queue */ +#endif + tBTM_SCO_CB *p_conn_cb; /* Callback for when connected */ + tBTM_SCO_CB *p_disc_cb; /* Callback for when disconnect */ + UINT16 state; /* The state of the SCO link */ + UINT16 hci_handle; /* HCI Handle */ + BOOLEAN is_orig; /* TRUE if the originator */ + BOOLEAN rem_bd_known; /* TRUE if remote BD addr known */ + +} tSCO_CONN; + +/* SCO Management control block */ +typedef struct +{ + tBTM_SCO_IND_CBACK *app_sco_ind_cb; +#if BTM_SCO_HCI_INCLUDED == TRUE + tBTM_SCO_DATA_CB *p_data_cb; /* Callback for SCO data over HCI */ + UINT32 xmit_window_size; /* Total SCO window in bytes */ +#endif + tSCO_CONN sco_db[BTM_MAX_SCO_LINKS]; + tBTM_ESCO_PARAMS def_esco_parms; + BD_ADDR xfer_addr; + UINT16 sco_disc_reason; + BOOLEAN esco_supported; /* TRUE if 1.2 cntlr AND supports eSCO links */ + tBTM_SCO_TYPE desired_sco_mode; + tBTM_SCO_TYPE xfer_sco_type; + tBTM_SCO_PCM_PARAM sco_pcm_param; + tBTM_SCO_CODEC_TYPE codec_in_use; /* None, CVSD, MSBC, etc. */ +#if BTM_SCO_HCI_INCLUDED == TRUE + tBTM_SCO_ROUTE_TYPE sco_path; +#endif + +} tSCO_CB; + + +#if BTM_SCO_INCLUDED == TRUE +extern void btm_set_sco_ind_cback( tBTM_SCO_IND_CBACK *sco_ind_cb ); +extern void btm_accept_sco_link(UINT16 sco_inx, tBTM_ESCO_PARAMS *p_setup, + tBTM_SCO_CB *p_conn_cb, tBTM_SCO_CB *p_disc_cb); +extern void btm_reject_sco_link(UINT16 sco_inx ); +extern void btm_sco_chk_pend_rolechange (UINT16 hci_handle); +#else +#define btm_accept_sco_link(sco_inx, p_setup, p_conn_cb, p_disc_cb) +#define btm_reject_sco_link(sco_inx) +#define btm_set_sco_ind_cback(sco_ind_cb) +#define btm_sco_chk_pend_rolechange(hci_handle) +#endif /* BTM_SCO_INCLUDED */ + +/* +** Define structure for Security Service Record. +** A record exists for each service registered with the Security Manager +*/ +typedef struct +{ + UINT32 mx_proto_id; /* Service runs over this multiplexer protocol */ + UINT32 orig_mx_chan_id; /* Channel on the multiplexer protocol */ + UINT32 term_mx_chan_id; /* Channel on the multiplexer protocol */ + UINT16 psm; /* L2CAP PSM value */ + UINT16 security_flags; /* Bitmap of required security features */ + UINT8 service_id; /* Passed in authorization callback */ +#if (L2CAP_UCD_INCLUDED == TRUE) + UINT16 ucd_security_flags; /* Bitmap of required security features for UCD */ +#endif +#if BTM_SEC_SERVICE_NAME_LEN > 0 + UINT8 orig_service_name[BTM_SEC_SERVICE_NAME_LEN + 1]; + UINT8 term_service_name[BTM_SEC_SERVICE_NAME_LEN + 1]; +#endif +} tBTM_SEC_SERV_REC; + +#if BLE_INCLUDED == TRUE +/* LE Security information of device in Slave Role */ +typedef struct +{ + BT_OCTET16 irk; /* peer diverified identity root */ + BT_OCTET16 ltk; /* peer long term key */ + BT_OCTET16 csrk; /* peer SRK peer device used to secured sign local data */ + + BT_OCTET8 rand; /* random vector for LTK generation */ + UINT16 ediv; /* LTK diversifier of this slave device */ + UINT16 div; /* local DIV to generate local LTK=d1(ER,DIV,0) and CSRK=d1(ER,DIV,1) */ + UINT8 sec_level; /* local pairing security level */ + UINT8 key_size; /* key size of the LTK delivered to peer device */ + UINT8 srk_sec_level; /* security property of peer SRK for this device */ + UINT8 local_csrk_sec_level; /* security property of local CSRK for this device */ + + UINT32 counter; /* peer sign counter for verifying rcv signed cmd */ + UINT32 local_counter; /* local sign counter for sending signed write cmd*/ +}tBTM_SEC_BLE_KEYS; + +#endif /* BLE_INCLUDED */ + +typedef struct +{ + tBLE_ADDR_TYPE ble_addr_type; /* LE device type: public or random address */ + BD_ADDR reconn_addr; /* reconnect address */ + BD_ADDR cur_rand_addr; /* current random address */ + BD_ADDR static_addr; /* static address */ + +#if SMP_INCLUDED == TRUE + tBTM_LE_KEY_TYPE key_type; /* bit mask of valid key types in record */ + tBTM_SEC_BLE_KEYS keys; /* LE device security info in slave rode */ +#endif +} tBTM_SEC_BLE; + +/* +** Define structure for Security Device Record. +** A record exists for each device authenticated with this device +*/ +typedef struct +{ + tBTM_SEC_SERV_REC *p_cur_service; + tBTM_SEC_CALLBACK *p_callback; + void *p_ref_data; + UINT32 timestamp; /* Timestamp of the last connection */ + UINT32 trusted_mask[BTM_SEC_SERVICE_ARRAY_SIZE]; /* Bitwise OR of trusted services */ + UINT16 hci_handle; /* Handle to connection when exists */ + UINT16 clock_offset; /* Latest known clock offset */ + BD_ADDR bd_addr; /* BD_ADDR of the device */ + DEV_CLASS dev_class; /* DEV_CLASS of the device */ + LINK_KEY link_key; /* Device link key */ + +#define BTM_SEC_AUTHORIZED BTM_SEC_FLAG_AUTHORIZED +#define BTM_SEC_AUTHENTICATED BTM_SEC_FLAG_AUTHENTICATED +#define BTM_SEC_ENCRYPTED BTM_SEC_FLAG_ENCRYPTED +#define BTM_SEC_NAME_KNOWN 0x08 +#define BTM_SEC_LINK_KEY_KNOWN BTM_SEC_FLAG_LKEY_KNOWN +#define BTM_SEC_LINK_KEY_AUTHED 0x20 +#define BTM_SEC_ROLE_SWITCHED 0x40 +#define BTM_SEC_IN_USE 0x80 + + tBTM_BD_NAME sec_bd_name; /* User friendly name of the device. (may be truncated to save space in dev_rec table) */ + UINT8 sec_flags; /* Current device security state */ + BD_FEATURES features; /* Features suported by the device */ + +#define BTM_SEC_STATE_IDLE 0 +#define BTM_SEC_STATE_AUTHENTICATING 1 +#define BTM_SEC_STATE_ENCRYPTING 2 +#define BTM_SEC_STATE_GETTING_NAME 3 +#define BTM_SEC_STATE_AUTHORIZING 4 +#define BTM_SEC_STATE_SWITCHING_ROLE 5 +#define BTM_SEC_STATE_DISCONNECTING 6 +#define BTM_SEC_STATE_DELAY_FOR_ENC 7 /* delay to check for encryption to work around controller problems */ + + UINT8 sec_state; /* Operating state */ + BOOLEAN is_originator; /* TRUE if device is originating connection */ +#if (L2CAP_UCD_INCLUDED == TRUE) + BOOLEAN is_ucd; /* TRUE if device is sending or receiving UCD */ + /* if incoming security failed, received UCD will be discarded */ +#endif + BOOLEAN role_master; /* TRUE if current mode is master */ + UINT16 security_required; /* Security required for connection */ + BOOLEAN link_key_not_sent; /* link key notification has not been sent waiting for name */ + UINT8 link_key_type; /* Type of key used in pairing */ + BOOLEAN link_key_changed; /* Changed link key during current connection */ + +#define BTM_SM4_UNKNOWN 0x00 +#define BTM_SM4_KNOWN 0x10 +#define BTM_SM4_TRUE 0x11 +#define BTM_SM4_REQ_PEND 0x08 /* set this bit when getting remote features */ +#define BTM_SM4_UPGRADE 0x04 /* set this bit when upgrading link key */ +#define BTM_SM4_RETRY 0x02 /* set this bit to retry on HCI_ERR_KEY_MISSING or HCI_ERR_LMP_ERR_TRANS_COLLISION */ +#define BTM_SM4_DD_ACP 0x20 /* set this bit to indicate peer initiated dedicated bonding */ +#define BTM_SM4_CONN_PEND 0x40 /* set this bit to indicate accepting acl conn; to be cleared on btm_acl_created */ + UINT8 sm4; /* BTM_SM4_TRUE, if the peer supports SM4 */ + tBTM_IO_CAP rmt_io_caps; /* IO capability of the peer device */ + BOOLEAN rmt_auth_req; /* the auth_req flag as in the IO caps rsp evt */ + +#if (BLE_INCLUDED == TRUE) + UINT8 enc_key_size; /* current link encryption key size */ + tBTM_SEC_BLE ble; + tBT_DEVICE_TYPE device_type; + tBTM_LE_CONN_PRAMS conn_params; +#endif + +// btla-specific ++ +#if BTM_DISC_DURING_RS == TRUE +#define BTM_SEC_RS_NOT_PENDING 0 /* Role Switch not in progress */ +#define BTM_SEC_RS_PENDING 1 /* Role Switch in progress */ +#define BTM_SEC_DISC_PENDING 2 /* Disconnect is pending */ + UINT8 rs_disc_pending; +#endif +// btla-specific -- +} tBTM_SEC_DEV_REC; + +#define BTM_SEC_IS_SM4(sm) ((BOOLEAN)(BTM_SM4_TRUE == ((sm)&BTM_SM4_TRUE))) +#define BTM_SEC_IS_SM4_LEGACY(sm) ((BOOLEAN)(BTM_SM4_KNOWN == ((sm)&BTM_SM4_TRUE))) +#define BTM_SEC_IS_SM4_UNKNOWN(sm) ((BOOLEAN)(BTM_SM4_UNKNOWN == ((sm)&BTM_SM4_TRUE))) + + +/* +** Define device configuration structure +*/ +typedef struct +{ +#if BTM_MAX_LOC_BD_NAME_LEN > 0 + tBTM_LOC_BD_NAME bd_name; /* local Bluetooth device name */ +#endif + BOOLEAN pin_type; /* TRUE if PIN type is fixed */ + UINT8 pin_code_len; /* Bonding information */ + PIN_CODE pin_code; /* PIN CODE if pin type is fixed */ + BOOLEAN connectable; /* If TRUE page scan should be enabled */ + UINT8 def_inq_scan_mode; /* ??? limited/general/none */ +} tBTM_CFG; + +#if BTM_PWR_MGR_INCLUDED == TRUE +enum +{ + BTM_PM_ST_ACTIVE = BTM_PM_STS_ACTIVE, + BTM_PM_ST_HOLD = BTM_PM_STS_HOLD, + BTM_PM_ST_SNIFF = BTM_PM_STS_SNIFF, + BTM_PM_ST_PARK = BTM_PM_STS_PARK, + BTM_PM_ST_PENDING = BTM_PM_STS_PENDING +}; +typedef UINT8 tBTM_PM_STATE; + +enum +{ + BTM_PM_SET_MODE_EVT, /* Set power mode API is called. */ + BTM_PM_UPDATE_EVT, + BTM_PM_RD_MODE_EVT /* Read power mode API is called. */ +}; +typedef UINT8 tBTM_PM_EVENT; + +typedef struct +{ + UINT16 event; + UINT16 len; + UINT8 link_ind; +} tBTM_PM_MSG_DATA; + +typedef struct +{ + UINT8 hci_status; + UINT8 mode; + UINT16 interval; +} tBTM_PM_MD_CHG_DATA; + +typedef struct +{ + UINT8 pm_id; /* the entity that calls SetPowerMode API */ + tBTM_PM_PWR_MD *p_pmd; +} tBTM_PM_SET_MD_DATA; + +typedef struct +{ + void *p_data; + UINT8 link_ind; +} tBTM_PM_SM_DATA; + +typedef struct +{ + tBTM_PM_PWR_MD req_mode[BTM_MAX_PM_RECORDS+1]; /* the desired mode and parameters of the connection*/ + tBTM_PM_PWR_MD set_mode; /* the mode and parameters sent down to the host controller. */ + UINT16 interval; /* the interval from last mode change event. */ +#if (BTM_SSR_INCLUDED == TRUE) + UINT16 max_lat; /* stored SSR maximum latency */ + UINT16 min_rmt_to;/* stored SSR minimum remote timeout */ + UINT16 min_loc_to;/* stored SSR minimum local timeout */ +#endif + tBTM_PM_STATE state; /* contains the current mode of the connection */ + BOOLEAN chg_ind; /* a request change indication */ +} tBTM_PM_MCB; + +#define BTM_PM_REC_NOT_USED 0 +typedef struct +{ + tBTM_PM_STATUS_CBACK *cback;/* to notify the registered party of mode change event */ + UINT8 mask; /* registered request mask. 0, if this entry is not used */ +} tBTM_PM_RCB; +#endif /* BTM_PWR_MGR_INCLUDED */ + +enum +{ + BTM_BLI_ACL_UP_EVT, + BTM_BLI_ACL_DOWN_EVT, + BTM_BLI_PAGE_EVT, + BTM_BLI_PAGE_DONE_EVT, + BTM_BLI_INQ_EVT, + BTM_BLI_INQ_CANCEL_EVT, + BTM_BLI_INQ_DONE_EVT +}; +typedef UINT8 tBTM_BLI_EVENT; + +/* Pairing State */ +enum +{ + BTM_PAIR_STATE_IDLE, /* Idle */ + BTM_PAIR_STATE_GET_REM_NAME, /* Getting the remote name (to check for SM4) */ + BTM_PAIR_STATE_WAIT_PIN_REQ, /* Started authentication, waiting for PIN req (PIN is pre-fetched) */ + BTM_PAIR_STATE_WAIT_LOCAL_PIN, /* Waiting for local PIN code */ + BTM_PAIR_STATE_WAIT_NUMERIC_CONFIRM, /* Waiting user 'yes' to numeric confirmation */ + BTM_PAIR_STATE_KEY_ENTRY, /* Key entry state (we are a keyboard) */ + BTM_PAIR_STATE_WAIT_LOCAL_OOB_RSP, /* Waiting for local response to peer OOB data */ + BTM_PAIR_STATE_WAIT_LOCAL_IOCAPS, /* Waiting for local IO capabilities and OOB data */ + BTM_PAIR_STATE_INCOMING_SSP, /* Incoming SSP (got peer IO caps when idle) */ + BTM_PAIR_STATE_WAIT_AUTH_COMPLETE, /* All done, waiting authentication cpmplete */ + BTM_PAIR_STATE_WAIT_DISCONNECT /* Waiting to disconnect the ACL */ +}; +typedef UINT8 tBTM_PAIRING_STATE; + +#define BTM_PAIR_FLAGS_WE_STARTED_DD 0x01 /* We want to do dedicated bonding */ +#define BTM_PAIR_FLAGS_PEER_STARTED_DD 0x02 /* Peer initiated dedicated bonding */ +#define BTM_PAIR_FLAGS_DISC_WHEN_DONE 0x04 +#define BTM_PAIR_FLAGS_PIN_REQD 0x08 /* set this bit when pin_callback is called */ +#define BTM_PAIR_FLAGS_PRE_FETCH_PIN 0x10 /* set this bit when pre-fetch pin */ +#define BTM_PAIR_FLAGS_REJECTED_CONNECT 0x20 /* set this bit when rejected incoming connection */ + +typedef struct +{ + BOOLEAN is_mux; + BD_ADDR bd_addr; + UINT16 psm; + BOOLEAN is_orig; + tBTM_SEC_CALLBACK *p_callback; + void *p_ref_data; + UINT32 mx_proto_id; + UINT32 mx_chan_id; +} tBTM_SEC_QUEUE_ENTRY; + +#if (L2CAP_UCD_INCLUDED == TRUE) + +#define CONN_ORIENT_TERM 0x00 /* incoming connection oriented */ +#define CONN_ORIENT_ORIG 0x01 /* outgoing connection oriented */ +#define CONNLESS_TERM 0x02 /* incoming connectionless */ +#define CONNLESS_ORIG 0x03 /* outgoing connectionless */ +#define CONNECTION_TYPE_ORIG_MASK 0x01 /* mask for direction */ +#define CONNECTION_TYPE_CONNLESS_MASK 0x02 /* mask for connectionless or not */ +typedef UINT8 CONNECTION_TYPE; + +#else + +#define CONN_ORIENT_TERM FALSE +#define CONN_ORIENT_ORIG TRUE +typedef BOOLEAN CONNECTION_TYPE; + +#endif /* (L2CAP_UCD_INCLUDED == TRUE) */ + +/* Define a structure to hold all the BTM data +*/ + +#define BTM_STATE_BUFFER_SIZE 5 /* size of state buffer */ + +#if (BTM_PCM2_INCLUDED == TRUE) +/* Define pcm2_action */ +enum +{ + BTM_PCM2_ACT_NONE, + BTM_PCM2_ACT_SENT_ARC, + BTM_PCM2_READ_PARAM, + BTM_PCM2_WRITE_PARAM, +}; +typedef UINT8 tBTM_PCM2_ACTION; +#endif + +typedef struct +{ + tBTM_CFG cfg; /* Device configuration */ + + /**************************************************** + ** ACL Management + ****************************************************/ + tACL_CONN acl_db[MAX_L2CAP_LINKS]; +#if( RFCOMM_INCLUDED==TRUE) + UINT8 btm_scn[BTM_MAX_SCN]; /* current SCNs: TRUE if SCN is in use */ +#endif + UINT16 btm_def_link_policy; + UINT16 btm_def_link_super_tout; + +#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE) + tBTM_BL_EVENT_MASK bl_evt_mask; + tBTM_BL_CHANGE_CB *p_bl_changed_cb; /* Callback for when Busy Level changed */ +#else + tBTM_ACL_DB_CHANGE_CB *p_acl_changed_cb; /* Callback for when ACL DB changed */ +#endif + + tBTM_LSTO_CBACK *p_lsto_cback; /* for link supervision timeout change event */ + + /**************************************************** + ** Power Management + ****************************************************/ +#if BTM_PWR_MGR_INCLUDED == TRUE + tBTM_PM_MCB pm_mode_db[MAX_L2CAP_LINKS]; /* per ACL link */ + tBTM_PM_RCB pm_reg_db[BTM_MAX_PM_RECORDS+1]; /* per application/module */ + UINT8 pm_pend_link; /* the index of acl_db, which has a pending PM cmd */ + UINT8 pm_pend_id; /* the id pf the module, which has a pending PM cmd */ +#endif /* BTM_PWR_MGR_INCLUDED == TRUE */ + + /***************************************************** + ** Device control + *****************************************************/ + tBTM_DEVCB devcb; + + /***************************************************** + ** BLE Device controllers + *****************************************************/ +#if (BLE_INCLUDED == TRUE) + tBTM_BLE_CB ble_ctr_cb; + + UINT16 enc_handle; + BT_OCTET8 enc_rand; /* received rand value from LTK request*/ + UINT16 ediv; /* received ediv value from LTK request */ + UINT8 key_size; +#endif + + /* Packet types supported by the local device */ + UINT16 btm_acl_pkt_types_supported; + UINT16 btm_sco_pkt_types_supported; + + + /***************************************************** + ** Inquiry + *****************************************************/ + tBTM_INQUIRY_VAR_ST btm_inq_vars; + tBTM_FILTER_CB *p_inq_filter_cb; /* Callback that can be set if host */ + /* wants to verify inquiry filters */ + + /***************************************************** + ** SCO Management + *****************************************************/ +#if BTM_SCO_INCLUDED == TRUE + tSCO_CB sco_cb; +#endif + + /***************************************************** + ** Security Management + *****************************************************/ + tBTM_APPL_INFO api; + +#define BTM_SEC_MAX_RMT_NAME_CALLBACKS 2 + tBTM_RMT_NAME_CALLBACK *p_rmt_name_callback[BTM_SEC_MAX_RMT_NAME_CALLBACKS]; + + tBTM_FILTER_CB *p_conn_filter_cb; /* Callback that can be set if host */ + /* wants to verify connectability filters*/ + + tBTM_SEC_DEV_REC *p_collided_dev_rec; + TIMER_LIST_ENT sec_collision_tle; + UINT32 collision_start_time; + UINT32 max_collision_delay; + UINT32 dev_rec_count; /* Counter used for device record timestamp */ + UINT8 security_mode; + BOOLEAN pairing_disabled; + BOOLEAN connect_only_paired; + BOOLEAN security_mode_changed; /* mode changed during bonding */ + BOOLEAN pin_type_changed; /* pin type changed during bonding */ + BOOLEAN sec_req_pending; /* TRUE if a request is pending */ +// btla-specific ++ +#ifdef PORCHE_PAIRING_CONFLICT + UINT8 pin_code_len_saved; /* for legacy devices */ +#endif +// btla-specific -- + + UINT8 pin_code_len; /* for legacy devices */ + PIN_CODE pin_code; /* for legacy devices */ + tBTM_PAIRING_STATE pairing_state; /* The current pairing state */ + UINT8 pairing_flags; /* The current pairing flags */ + BD_ADDR pairing_bda; /* The device currently pairing */ + TIMER_LIST_ENT pairing_tle; /* Timer for pairing process */ + UINT16 disc_handle; /* for legacy devices */ + UINT8 disc_reason; /* for legacy devices */ + tBTM_SEC_SERV_REC sec_serv_rec[BTM_SEC_MAX_SERVICE_RECORDS]; + tBTM_SEC_DEV_REC sec_dev_rec[BTM_SEC_MAX_DEVICE_RECORDS]; + tBTM_SEC_SERV_REC *p_out_serv; + tBTM_MKEY_CALLBACK *mkey_cback; + + BD_ADDR connecting_bda; + DEV_CLASS connecting_dc; + + UINT8 first_disabled_channel; + UINT8 last_disabled_channel; + + UINT8 acl_disc_reason; + UINT8 trace_level; +#if (defined(BTM_BUSY_LEVEL_CHANGE_INCLUDED) && BTM_BUSY_LEVEL_CHANGE_INCLUDED == TRUE) + UINT8 num_acl; /* num of active ACL links */ + UINT8 busy_level; /* the current busy level */ + BOOLEAN is_paging; /* TRUE, if paging is in progess */ + BOOLEAN is_inquiry; /* TRUE, if inquiry is in progess */ +#endif + BUFFER_Q page_queue; + BOOLEAN paging; + BOOLEAN discing; + BUFFER_Q sec_pending_q; /* pending sequrity requests in tBTM_SEC_QUEUE_ENTRY format */ + +#if (!defined(BT_TRACE_VERBOSE) || (BT_TRACE_VERBOSE == FALSE)) + char state_temp_buffer[BTM_STATE_BUFFER_SIZE]; +#endif + +#if (defined(BTM_PCM2_INCLUDED) && BTM_PCM2_INCLUDED == TRUE) + UINT16 sys_features; + UINT8 pcm2_params[BRCM_PCM2_SETUP_WRITE_SIZE]; + tBTM_PCM2_ACTION pcm2_action; +#endif + +} tBTM_CB; + + +#ifdef __cplusplus +extern "C" +{ +#endif + +#if BTM_DYNAMIC_MEMORY == FALSE +BTM_API extern tBTM_CB btm_cb; +#else +BTM_API extern tBTM_CB *btm_cb_ptr; +#define btm_cb (*btm_cb_ptr) +#endif + +/* Internal functions provided by btm_main.c +******************************************** +*/ +extern void btm_init (void); + +/* Internal functions provided by btm_inq.c +******************************************* +*/ +extern tBTM_STATUS btm_initiate_rem_name (BD_ADDR remote_bda, + tBTM_INQ_INFO *p_cur, + UINT8 origin, UINT32 timeout, + tBTM_CMPL_CB *p_cb); + +extern void btm_process_remote_name (BD_ADDR bda, BD_NAME name, UINT16 evt_len, + UINT8 hci_status); +extern void btm_inq_rmt_name_failed(void); + +/* Inquiry related functions */ +extern void btm_clr_inq_db (BD_ADDR p_bda); +extern void btm_inq_db_init (void); +extern void btm_process_inq_results (UINT8 *p, UINT8 inq_res_mode); +extern void btm_process_inq_complete (UINT8 status, UINT8 mode); +extern void btm_event_filter_complete (UINT8 *p); +extern void btm_inq_stop_on_ssp(void); +extern void btm_inq_clear_ssp(void); +extern tINQ_DB_ENT *btm_inq_db_find (BD_ADDR p_bda); +extern BOOLEAN btm_inq_find_bdaddr (BD_ADDR p_bda); + +#if (BTM_EIR_CLIENT_INCLUDED == TRUE) +extern BOOLEAN btm_lookup_eir(BD_ADDR_PTR p_rem_addr); +#endif + +/* Internal functions provided by btm_acl.c +******************************************** +*/ +extern void btm_acl_init (void); +extern void btm_acl_timeout (TIMER_LIST_ENT *p_tle); +extern void btm_acl_created (BD_ADDR bda, DEV_CLASS dc, BD_NAME bdn, + UINT16 hci_handle, UINT8 link_role, UINT8 is_le_link); +extern void btm_acl_removed (BD_ADDR bda); +extern void btm_acl_device_down (void); +extern void btm_acl_update_busy_level (tBTM_BLI_EVENT event); +extern void btm_acl_link_key_change (UINT16 handle, UINT8 status); + +extern void btm_cont_rswitch_or_chglinkkey (tACL_CONN *p, + tBTM_SEC_DEV_REC *p_dev_rec, + UINT8 hci_status); + +extern UINT8 btm_handle_to_acl_index (UINT16 hci_handle); +extern void btm_read_link_policy_complete (UINT8 *p); +extern void btm_read_rssi_complete (UINT8 *p); +extern void btm_read_tx_power_complete (UINT8 *p, BOOLEAN is_ble); +extern void btm_read_link_quality_complete (UINT8 *p); +extern tBTM_STATUS btm_set_packet_types (tACL_CONN *p, UINT16 pkt_types); +extern void btm_process_clk_off_comp_evt (UINT16 hci_handle, UINT16 clock_offset); +extern void btm_acl_role_changed (UINT8 hci_status, BD_ADDR bd_addr, UINT8 new_role); +extern void btm_acl_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable); +BTM_API extern UINT16 btm_get_acl_disc_reason_code (void); +BTM_API extern tBTM_STATUS btm_remove_acl (BD_ADDR bd_addr); +extern void btm_read_remote_features_complete (UINT8 *p); +extern void btm_read_remote_ext_features_complete (UINT8 *p); +extern void btm_read_remote_ext_features_failed (UINT8 status); +extern void btm_read_remote_version_complete (UINT8 *p); +// btla-specific ++ +extern void btm_acl_chk_peer_pkt_type_support (tACL_CONN *p, UINT16 *p_pkt_type); +// btla-specific -- +/* Read maximum data packet that can be sent over current connection */ +extern UINT16 btm_get_max_packet_size (BD_ADDR addr); +extern tACL_CONN *btm_bda_to_acl (BD_ADDR bda); +extern BOOLEAN btm_acl_notif_conn_collision (BD_ADDR bda); + +#if BTM_PWR_MGR_INCLUDED == FALSE +extern void btm_process_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, + UINT16 interval); + +/* Internal functions provided by btm_pm.c +******************************************** +*/ +#else +extern void btm_pm_reset(void); +extern void btm_pm_sm_alloc(UINT8 ind); +extern void btm_pm_proc_cmd_status(UINT8 status); +extern void btm_pm_proc_mode_change (UINT8 hci_status, UINT16 hci_handle, UINT8 mode, + UINT16 interval); +extern void btm_pm_proc_ssr_evt (UINT8 *p, UINT16 evt_len); +#if BTM_SCO_INCLUDED == TRUE +extern void btm_sco_chk_pend_unpark (UINT8 hci_status, UINT16 hci_handle); +#else +#define btm_sco_chk_pend_unpark(hci_status, hci_handle) +#endif /* BTM_SCO_INCLUDED */ +#endif /* BTM_PWR_MGR_INCLUDED == FALSE */ +extern void btm_qos_setup_complete (UINT8 status, UINT16 handle, FLOW_SPEC *p_flow); + + +/* Internal functions provided by btm_sco.c +******************************************** +*/ +extern void btm_sco_init (void); +extern void btm_sco_connected (UINT8 hci_status, BD_ADDR bda, UINT16 hci_handle, + tBTM_ESCO_DATA *p_esco_data); +extern void btm_esco_proc_conn_chg (UINT8 status, UINT16 handle, UINT8 tx_interval, + UINT8 retrans_window, UINT16 rx_pkt_len, + UINT16 tx_pkt_len); +extern void btm_sco_conn_req (BD_ADDR bda, DEV_CLASS dev_class, UINT8 link_type); +extern void btm_sco_removed (UINT16 hci_handle, UINT8 reason); +extern void btm_sco_acl_removed (BD_ADDR bda); +extern void btm_route_sco_data (BT_HDR *p_msg); +extern BOOLEAN btm_is_sco_active (UINT16 handle); +extern void btm_remove_sco_links (BD_ADDR bda); +extern BOOLEAN btm_is_sco_active_by_bdaddr (BD_ADDR remote_bda); + +extern tBTM_SCO_TYPE btm_read_def_esco_mode (tBTM_ESCO_PARAMS *p_parms); +extern UINT16 btm_find_scb_by_handle (UINT16 handle); +extern void btm_sco_flush_sco_data(UINT16 sco_inx); + +/* Internal functions provided by btm_devctl.c +********************************************** +*/ +extern void btm_dev_init (void); +extern void btm_dev_absent (void); +extern void btm_dev_timeout (TIMER_LIST_ENT *p_tle); +extern void btm_reset_complete (void); +extern void btm_read_local_version_complete (UINT8 *p, UINT16 evt_len); +extern void btm_read_hci_buf_size_complete (UINT8 *p, UINT16 evt_len); +extern void btm_read_local_features_complete (UINT8 *p, UINT16 evt_len); +extern void btm_read_local_name_complete (UINT8 *p, UINT16 evt_len); +extern void btm_read_local_addr_complete (UINT8 *p, UINT16 evt_len); +extern void btm_get_local_features (void); + +#if (BLE_INCLUDED == TRUE) +extern void btm_read_ble_buf_size_complete (UINT8 *p, UINT16 evt_len); +extern void btm_read_white_list_size_complete(UINT8 *p, UINT16 evt_len); +extern void btm_ble_add_2_white_list_complete(UINT8 *p, UINT16 evt_len); +extern void btm_ble_remove_from_white_list_complete(UINT8 *p, UINT16 evt_len); +extern void btm_ble_clear_white_list_complete(UINT8 *p, UINT16 evt_len); +#endif /* BLE_INCLUDED */ + +/* Vendor Specific Command complete evt handler */ +extern void btm_vsc_complete (UINT8 *p, UINT16 cc_opcode, UINT16 evt_len, + tBTM_CMPL_CB *p_vsc_cplt_cback); +extern void btm_inq_db_reset (void); +extern void btm_vendor_specific_evt (UINT8 *p, UINT8 evt_len); +extern UINT8 btm_get_hci_version (void); +extern void btm_read_stored_link_key_complete (UINT8 *p); +extern void btm_write_stored_link_key_complete (UINT8 *p); +extern void btm_delete_stored_link_key_complete (UINT8 *p); +extern void btm_return_link_keys_evt (tBTM_RETURN_LINK_KEYS_EVT *result); +extern void btm_report_device_status (tBTM_DEV_STATUS status); + + +/* Internal functions provided by btm_dev.c +********************************************** +*/ +extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr); +extern UINT8 btm_get_voice_coding_support (void); + +extern tBTM_SEC_DEV_REC *btm_sec_alloc_dev (BD_ADDR bd_addr); +extern void btm_sec_free_dev (tBTM_SEC_DEV_REC *p_dev_rec); +extern tBTM_SEC_DEV_REC *btm_find_dev (BD_ADDR bd_addr); +extern tBTM_SEC_DEV_REC *btm_find_or_alloc_dev (BD_ADDR bd_addr); +extern tBTM_SEC_DEV_REC *btm_find_dev_by_handle (UINT16 handle); + +/* Internal functions provided by btm_sec.c +********************************************** +*/ +extern BOOLEAN btm_dev_support_switch (BD_ADDR bd_addr); +extern tBTM_STATUS btm_sec_l2cap_access_req (BD_ADDR bd_addr, UINT16 psm, + UINT16 handle, CONNECTION_TYPE conn_type, + tBTM_SEC_CALLBACK *p_callback, void *p_ref_data); +extern tBTM_STATUS btm_sec_mx_access_request (BD_ADDR bd_addr, UINT16 psm, BOOLEAN is_originator, + UINT32 mx_proto_id, UINT32 mx_chan_id, + tBTM_SEC_CALLBACK *p_callback, void *p_ref_data); +extern void btm_sec_conn_req (UINT8 *bda, UINT8 *dc); +extern void btm_create_conn_cancel_complete (UINT8 *p); +extern void btm_proc_lsto_evt(UINT16 handle, UINT16 timeout); +extern void btm_read_linq_tx_power_complete (UINT8 *p); + +extern void btm_sec_init (UINT8 sec_mode); +extern void btm_sec_dev_reset (void); +extern void btm_sec_abort_access_req (BD_ADDR bd_addr); +extern void btm_sec_auth_complete (UINT16 handle, UINT8 status); +extern void btm_sec_mkey_comp_event (UINT16 handle, UINT8 status, UINT8 key_flg); +extern void btm_sec_encrypt_change (UINT16 handle, UINT8 status, UINT8 encr_enable); +extern void btm_sec_connected (UINT8 *bda, UINT16 handle, UINT8 status, UINT8 enc_mode); +extern tBTM_STATUS btm_sec_disconnect (UINT16 handle, UINT8 reason); +extern void btm_sec_disconnected (UINT16 handle, UINT8 reason); +extern void btm_sec_rmt_name_request_complete (UINT8 *bd_addr, UINT8 *bd_name, UINT8 status); +extern void btm_sec_rmt_host_support_feat_evt (UINT8 *p); +extern void btm_io_capabilities_req (UINT8 *p); +extern void btm_io_capabilities_rsp (UINT8 *p); +extern void btm_proc_sp_req_evt (tBTM_SP_EVT event, UINT8 *p); +extern void btm_keypress_notif_evt (UINT8 *p); +extern void btm_simple_pair_complete (UINT8 *p); +extern void btm_sec_link_key_notification (UINT8 *p_bda, UINT8 *p_link_key, UINT8 key_type); +extern void btm_sec_link_key_request (UINT8 *p_bda); +extern void btm_sec_pin_code_request (UINT8 *p_bda); +extern void btm_sec_update_clock_offset (UINT16 handle, UINT16 clock_offset); +extern void btm_sec_dev_rec_cback_event (tBTM_SEC_DEV_REC *p_dev_rec, UINT8 res); + +#if BLE_INCLUDED == TRUE +extern void btm_sec_clear_ble_keys (tBTM_SEC_DEV_REC *p_dev_rec); +extern BOOLEAN btm_sec_find_bonded_dev (UINT8 start_idx, UINT8 *p_found_idx, tBTM_SEC_DEV_REC *p_rec); +extern BOOLEAN btm_sec_is_a_bonded_dev (BD_ADDR bda); +#endif /* BLE_INCLUDED */ + +extern tINQ_DB_ENT *btm_inq_db_new (BD_ADDR p_bda); + +#if BTM_OOB_INCLUDED == TRUE +extern void btm_rem_oob_req (UINT8 *p); +extern void btm_read_local_oob_complete (UINT8 *p); +#else +#define btm_rem_oob_req(p) +#define btm_read_local_oob_complete(p) +#endif + +extern void btm_acl_resubmit_page (void); +extern void btm_acl_reset_paging (void); +extern void btm_acl_paging (BT_HDR *p, BD_ADDR dest); +extern void btm_acl_set_discing (BOOLEAN discing); +extern UINT8 btm_sec_clr_service_by_psm (UINT16 psm); + +#ifdef BRCM_VS +extern void btm_brcm_feat_init(void); +extern void btm_vs_reset_complete (void); +extern void btm_brcm_arc_init (void); + +#endif + +#ifdef __cplusplus +} +#endif + +#endif + |