diff options
Diffstat (limited to 'stack/include/hcimsgs.h')
| -rw-r--r-- | stack/include/hcimsgs.h | 1331 |
1 files changed, 1331 insertions, 0 deletions
diff --git a/stack/include/hcimsgs.h b/stack/include/hcimsgs.h new file mode 100644 index 0000000..3a23dbe --- /dev/null +++ b/stack/include/hcimsgs.h @@ -0,0 +1,1331 @@ +/****************************************************************************** + * + * Copyright (C) 1999-2012 Broadcom Corporation + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +#ifndef HCIMSGS_H +#define HCIMSGS_H + +#include "bt_target.h" +#include "hcidefs.h" +#include "bt_types.h" + + +#ifdef __cplusplus +extern "C" { +#endif + +/* Message by message.... */ + +#define HCIC_GET_UINT8(p, off) (UINT8)(*((UINT8 *)((p) + 1) + p->offset + 3 + (off))) + +#define HCIC_GET_UINT16(p, off) (UINT16)((*((UINT8 *)((p) + 1) + p->offset + 3 + (off)) + \ + (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 1) << 8))) + +#define HCIC_GET_UINT32(p, off) (UINT32)((*((UINT8 *)((p) + 1) + p->offset + 3 + (off)) + \ + (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 1) << 8) + \ + (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 2) << 16) + \ + (*((UINT8 *)((p) + 1) + p->offset + 3 + (off) + 3) << 24))) + +#define HCIC_GET_ARRAY(p, off, x, len) \ +{ \ + UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x; \ + int ii; for (ii = 0; ii < len; ii++) *rr++ = *qq++; \ +} + +#define HCIC_GET_ARRAY16(p, off, x) \ +{ \ + UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + 15; \ + int ii; for (ii = 0; ii < 16; ii++) *rr-- = *qq++; \ +} + +#define HCIC_GET_BDADDR(p, off, x) \ +{ \ + UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + BD_ADDR_LEN - 1; \ + int ii; for (ii = 0; ii < BD_ADDR_LEN; ii++) *rr-- = *qq++; \ +} + +#define HCIC_GET_DEVCLASS(p, off, x) \ +{ \ + UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + DEV_CLASS_LEN - 1; \ + int ii; for (ii = 0; ii < DEV_CLASS_LEN; ii++) *rr-- = *qq++; \ +} + +#define HCIC_GET_LAP(p, off, x) \ +{ \ + UINT8 *qq = ((UINT8 *)((p) + 1) + p->offset + 3 + (off)); UINT8 *rr = (UINT8 *)x + LAP_LEN - 1; \ + int ii; for (ii = 0; ii < LAP_LEN; ii++) *rr-- = *qq++; \ +} + +#define HCIC_GET_POINTER(p, off) ((UINT8 *)((p) + 1) + p->offset + 3 + (off)) + + +HCI_API extern BOOLEAN btsnd_hcic_inquiry(const LAP inq_lap, UINT8 duration, + UINT8 response_cnt); + +#define HCIC_PARAM_SIZE_INQUIRY 5 + + +#define HCIC_INQ_INQ_LAP_OFF 0 +#define HCIC_INQ_DUR_OFF 3 +#define HCIC_INQ_RSP_CNT_OFF 4 + /* Inquiry */ + + /* Inquiry Cancel */ +HCI_API extern BOOLEAN btsnd_hcic_inq_cancel(void); + +#define HCIC_PARAM_SIZE_INQ_CANCEL 0 + + /* Periodic Inquiry Mode */ +HCI_API extern BOOLEAN btsnd_hcic_per_inq_mode(UINT16 max_period, UINT16 min_period, + const LAP inq_lap, UINT8 duration, + UINT8 response_cnt); + +#define HCIC_PARAM_SIZE_PER_INQ_MODE 9 + +#define HCI_PER_INQ_MAX_INTRVL_OFF 0 +#define HCI_PER_INQ_MIN_INTRVL_OFF 2 +#define HCI_PER_INQ_INQ_LAP_OFF 4 +#define HCI_PER_INQ_DURATION_OFF 7 +#define HCI_PER_INQ_RSP_CNT_OFF 8 + /* Periodic Inquiry Mode */ + + /* Exit Periodic Inquiry Mode */ +HCI_API extern BOOLEAN btsnd_hcic_exit_per_inq(void); + +#define HCIC_PARAM_SIZE_EXIT_PER_INQ 0 + /* Create Connection */ +HCI_API extern BOOLEAN btsnd_hcic_create_conn(BD_ADDR dest, UINT16 packet_types, + UINT8 page_scan_rep_mode, + UINT8 page_scan_mode, + UINT16 clock_offset, + UINT8 allow_switch); + +#define HCIC_PARAM_SIZE_CREATE_CONN 13 + +#define HCIC_CR_CONN_BD_ADDR_OFF 0 +#define HCIC_CR_CONN_PKT_TYPES_OFF 6 +#define HCIC_CR_CONN_REP_MODE_OFF 8 +#define HCIC_CR_CONN_PAGE_SCAN_MODE_OFF 9 +#define HCIC_CR_CONN_CLK_OFF_OFF 10 +#define HCIC_CR_CONN_ALLOW_SWITCH_OFF 12 + /* Create Connection */ + + /* Disconnect */ +HCI_API extern BOOLEAN btsnd_hcic_disconnect(UINT16 handle, UINT8 reason); + +#define HCIC_PARAM_SIZE_DISCONNECT 3 + +#define HCI_DISC_HANDLE_OFF 0 +#define HCI_DISC_REASON_OFF 2 + /* Disconnect */ + +#if BTM_SCO_INCLUDED == TRUE + /* Add SCO Connection */ +HCI_API extern BOOLEAN btsnd_hcic_add_SCO_conn (UINT16 handle, UINT16 packet_types); +#endif /* BTM_SCO_INCLUDED */ + +#define HCIC_PARAM_SIZE_ADD_SCO_CONN 4 + +#define HCI_ADD_SCO_HANDLE_OFF 0 +#define HCI_ADD_SCO_PACKET_TYPES_OFF 2 + /* Add SCO Connection */ + + /* Create Connection Cancel */ +HCI_API extern BOOLEAN btsnd_hcic_create_conn_cancel(BD_ADDR dest); + +#define HCIC_PARAM_SIZE_CREATE_CONN_CANCEL 6 + +#define HCIC_CR_CONN_CANCEL_BD_ADDR_OFF 0 + /* Create Connection Cancel */ + + /* Accept Connection Request */ +HCI_API extern BOOLEAN btsnd_hcic_accept_conn (BD_ADDR bd_addr, UINT8 role); + +#define HCIC_PARAM_SIZE_ACCEPT_CONN 7 + +#define HCI_ACC_CONN_BD_ADDR_OFF 0 +#define HCI_ACC_CONN_ROLE_OFF 6 + /* Accept Connection Request */ + + /* Reject Connection Request */ +HCI_API extern BOOLEAN btsnd_hcic_reject_conn (BD_ADDR bd_addr, UINT8 reason); + +#define HCIC_PARAM_SIZE_REJECT_CONN 7 + +#define HCI_REJ_CONN_BD_ADDR_OFF 0 +#define HCI_REJ_CONN_REASON_OFF 6 + /* Reject Connection Request */ + + /* Link Key Request Reply */ +HCI_API extern BOOLEAN btsnd_hcic_link_key_req_reply (BD_ADDR bd_addr, + LINK_KEY link_key); + +#define HCIC_PARAM_SIZE_LINK_KEY_REQ_REPLY 22 + +#define HCI_LINK_KEY_REPLY_BD_ADDR_OFF 0 +#define HCI_LINK_KEY_REPLY_LINK_KEY_OFF 6 + /* Link Key Request Reply */ + + /* Link Key Request Neg Reply */ +HCI_API extern BOOLEAN btsnd_hcic_link_key_neg_reply (BD_ADDR bd_addr); + +#define HCIC_PARAM_SIZE_LINK_KEY_NEG_REPLY 6 + +#define HCI_LINK_KEY_NEG_REP_BD_ADR_OFF 0 + /* Link Key Request Neg Reply */ + + /* PIN Code Request Reply */ +HCI_API extern BOOLEAN btsnd_hcic_pin_code_req_reply (BD_ADDR bd_addr, + UINT8 pin_code_len, + PIN_CODE pin_code); + +#define HCIC_PARAM_SIZE_PIN_CODE_REQ_REPLY 23 + +#define HCI_PIN_CODE_REPLY_BD_ADDR_OFF 0 +#define HCI_PIN_CODE_REPLY_PIN_LEN_OFF 6 +#define HCI_PIN_CODE_REPLY_PIN_CODE_OFF 7 + /* PIN Code Request Reply */ + + /* Link Key Request Neg Reply */ +HCI_API extern BOOLEAN btsnd_hcic_pin_code_neg_reply (BD_ADDR bd_addr); + +#define HCIC_PARAM_SIZE_PIN_CODE_NEG_REPLY 6 + +#define HCI_PIN_CODE_NEG_REP_BD_ADR_OFF 0 + /* Link Key Request Neg Reply */ + + /* Change Connection Type */ +HCI_API extern BOOLEAN btsnd_hcic_change_conn_type (UINT16 handle, UINT16 packet_types); + +#define HCIC_PARAM_SIZE_CHANGE_CONN_TYPE 4 + +#define HCI_CHNG_PKT_TYPE_HANDLE_OFF 0 +#define HCI_CHNG_PKT_TYPE_PKT_TYPE_OFF 2 + /* Change Connection Type */ + +#define HCIC_PARAM_SIZE_CMD_HANDLE 2 + +#define HCI_CMD_HANDLE_HANDLE_OFF 0 + +HCI_API extern BOOLEAN btsnd_hcic_auth_request (UINT16 handle); /* Authentication Request */ + + /* Set Connection Encryption */ +HCI_API extern BOOLEAN btsnd_hcic_set_conn_encrypt (UINT16 handle, BOOLEAN enable); +#define HCIC_PARAM_SIZE_SET_CONN_ENCRYPT 3 + + +#define HCI_SET_ENCRYPT_HANDLE_OFF 0 +#define HCI_SET_ENCRYPT_ENABLE_OFF 2 + /* Set Connection Encryption */ + +HCI_API extern BOOLEAN btsnd_hcic_change_link_key (UINT16 handle); /* Change Connection Link Key */ + + /* Master Link Key */ +HCI_API extern BOOLEAN btsnd_hcic_master_link_key (BOOLEAN key_flag); + +#define HCIC_PARAM_SIZE_MASTER_LINK_KEY 1 + +#define HCI_MASTER_KEY_FLAG_OFF 0 + /* Master Link Key */ + + /* Remote Name Request */ +HCI_API extern BOOLEAN btsnd_hcic_rmt_name_req (BD_ADDR bd_addr, + UINT8 page_scan_rep_mode, + UINT8 page_scan_mode, + UINT16 clock_offset); + +#define HCIC_PARAM_SIZE_RMT_NAME_REQ 10 + +#define HCI_RMT_NAME_BD_ADDR_OFF 0 +#define HCI_RMT_NAME_REP_MODE_OFF 6 +#define HCI_RMT_NAME_PAGE_SCAN_MODE_OFF 7 +#define HCI_RMT_NAME_CLK_OFF_OFF 8 + /* Remote Name Request */ + + /* Remote Name Request Cancel */ +HCI_API extern BOOLEAN btsnd_hcic_rmt_name_req_cancel(BD_ADDR bd_addr); + +#define HCIC_PARAM_SIZE_RMT_NAME_REQ_CANCEL 6 + +#define HCI_RMT_NAME_CANCEL_BD_ADDR_OFF 0 + /* Remote Name Request Cancel */ + +HCI_API extern BOOLEAN btsnd_hcic_rmt_features_req(UINT16 handle); /* Remote Features Request */ + + /* Remote Extended Features */ +HCI_API extern BOOLEAN btsnd_hcic_rmt_ext_features(UINT16 handle, UINT8 page_num); + +#define HCIC_PARAM_SIZE_RMT_EXT_FEATURES 3 + +#define HCI_RMT_EXT_FEATURES_HANDLE_OFF 0 +#define HCI_RMT_EXT_FEATURES_PAGE_NUM_OFF 2 + /* Remote Extended Features */ + + + /* Local Extended Features */ +HCI_API extern BOOLEAN btsnd_hcic_read_local_ext_features (UINT8 page_num); + +#define HCIC_PARAM_SIZE_LOCAL_EXT_FEATURES 1 + +#define HCI_LOCAL_EXT_FEATURES_PAGE_NUM_OFF 0 + /* Local Extended Features */ + + +HCI_API extern BOOLEAN btsnd_hcic_rmt_ver_req(UINT16 handle); /* Remote Version Info Request */ +HCI_API extern BOOLEAN btsnd_hcic_read_rmt_clk_offset(UINT16 handle); /* Remote Clock Offset */ +HCI_API extern BOOLEAN btsnd_hcic_read_lmp_handle(UINT16 handle); /* Remote LMP Handle */ + +HCI_API extern BOOLEAN btsnd_hcic_setup_esco_conn (UINT16 handle, + UINT32 tx_bw, UINT32 rx_bw, + UINT16 max_latency, UINT16 voice, + UINT8 retrans_effort, + UINT16 packet_types); +#define HCIC_PARAM_SIZE_SETUP_ESCO 17 + +#define HCI_SETUP_ESCO_HANDLE_OFF 0 +#define HCI_SETUP_ESCO_TX_BW_OFF 2 +#define HCI_SETUP_ESCO_RX_BW_OFF 6 +#define HCI_SETUP_ESCO_MAX_LAT_OFF 10 +#define HCI_SETUP_ESCO_VOICE_OFF 12 +#define HCI_SETUP_ESCO_RETRAN_EFF_OFF 14 +#define HCI_SETUP_ESCO_PKT_TYPES_OFF 15 + + +HCI_API extern BOOLEAN btsnd_hcic_accept_esco_conn (BD_ADDR bd_addr, + UINT32 tx_bw, UINT32 rx_bw, + UINT16 max_latency, + UINT16 content_fmt, + UINT8 retrans_effort, + UINT16 packet_types); +#define HCIC_PARAM_SIZE_ACCEPT_ESCO 21 + +#define HCI_ACCEPT_ESCO_BDADDR_OFF 0 +#define HCI_ACCEPT_ESCO_TX_BW_OFF 6 +#define HCI_ACCEPT_ESCO_RX_BW_OFF 10 +#define HCI_ACCEPT_ESCO_MAX_LAT_OFF 14 +#define HCI_ACCEPT_ESCO_VOICE_OFF 16 +#define HCI_ACCEPT_ESCO_RETRAN_EFF_OFF 18 +#define HCI_ACCEPT_ESCO_PKT_TYPES_OFF 19 + + +HCI_API extern BOOLEAN btsnd_hcic_reject_esco_conn (BD_ADDR bd_addr, UINT8 reason); +#define HCIC_PARAM_SIZE_REJECT_ESCO 7 + +#define HCI_REJECT_ESCO_BDADDR_OFF 0 +#define HCI_REJECT_ESCO_REASON_OFF 6 + +/* Hold Mode */ +HCI_API extern BOOLEAN btsnd_hcic_hold_mode(UINT16 handle, UINT16 max_hold_period, + UINT16 min_hold_period); + +#define HCIC_PARAM_SIZE_HOLD_MODE 6 + +#define HCI_HOLD_MODE_HANDLE_OFF 0 +#define HCI_HOLD_MODE_MAX_PER_OFF 2 +#define HCI_HOLD_MODE_MIN_PER_OFF 4 + /* Hold Mode */ + + /* Sniff Mode */ +HCI_API extern BOOLEAN btsnd_hcic_sniff_mode(UINT16 handle, + UINT16 max_sniff_period, + UINT16 min_sniff_period, + UINT16 sniff_attempt, + UINT16 sniff_timeout); + +#define HCIC_PARAM_SIZE_SNIFF_MODE 10 + + +#define HCI_SNIFF_MODE_HANDLE_OFF 0 +#define HCI_SNIFF_MODE_MAX_PER_OFF 2 +#define HCI_SNIFF_MODE_MIN_PER_OFF 4 +#define HCI_SNIFF_MODE_ATTEMPT_OFF 6 +#define HCI_SNIFF_MODE_TIMEOUT_OFF 8 + /* Sniff Mode */ + +HCI_API extern BOOLEAN btsnd_hcic_exit_sniff_mode(UINT16 handle); /* Exit Sniff Mode */ + + /* Park Mode */ +HCI_API extern BOOLEAN btsnd_hcic_park_mode (UINT16 handle, + UINT16 beacon_max_interval, + UINT16 beacon_min_interval); + +#define HCIC_PARAM_SIZE_PARK_MODE 6 + +#define HCI_PARK_MODE_HANDLE_OFF 0 +#define HCI_PARK_MODE_MAX_PER_OFF 2 +#define HCI_PARK_MODE_MIN_PER_OFF 4 + /* Park Mode */ + +HCI_API extern BOOLEAN btsnd_hcic_exit_park_mode(UINT16 handle); /* Exit Park Mode */ + + /* QoS Setup */ +HCI_API extern BOOLEAN btsnd_hcic_qos_setup (UINT16 handle, UINT8 flags, + UINT8 service_type, + UINT32 token_rate, UINT32 peak, + UINT32 latency, UINT32 delay_var); + +#define HCIC_PARAM_SIZE_QOS_SETUP 20 + +#define HCI_QOS_HANDLE_OFF 0 +#define HCI_QOS_FLAGS_OFF 2 +#define HCI_QOS_SERVICE_TYPE_OFF 3 +#define HCI_QOS_TOKEN_RATE_OFF 4 +#define HCI_QOS_PEAK_BANDWIDTH_OFF 8 +#define HCI_QOS_LATENCY_OFF 12 +#define HCI_QOS_DELAY_VAR_OFF 16 + /* QoS Setup */ + +HCI_API extern BOOLEAN btsnd_hcic_role_discovery (UINT16 handle); /* Role Discovery */ + + /* Switch Role Request */ +HCI_API extern BOOLEAN btsnd_hcic_switch_role (BD_ADDR bd_addr, UINT8 role); + +#define HCIC_PARAM_SIZE_SWITCH_ROLE 7 + +#define HCI_SWITCH_BD_ADDR_OFF 0 +#define HCI_SWITCH_ROLE_OFF 6 + /* Switch Role Request */ + +HCI_API extern BOOLEAN btsnd_hcic_read_policy_set(UINT16 handle); /* Read Policy Settings */ + + /* Write Policy Settings */ +HCI_API extern BOOLEAN btsnd_hcic_write_policy_set(UINT16 handle, UINT16 settings); + +#define HCIC_PARAM_SIZE_WRITE_POLICY_SET 4 + +#define HCI_WRITE_POLICY_HANDLE_OFF 0 +#define HCI_WRITE_POLICY_SETTINGS_OFF 2 + /* Write Policy Settings */ + + /* Read Default Policy Settings */ +HCI_API extern BOOLEAN btsnd_hcic_read_def_policy_set(void); + +#define HCIC_PARAM_SIZE_READ_DEF_POLICY_SET 0 + /* Read Default Policy Settings */ + + /* Write Default Policy Settings */ +HCI_API extern BOOLEAN btsnd_hcic_write_def_policy_set(UINT16 settings); + +#define HCIC_PARAM_SIZE_WRITE_DEF_POLICY_SET 2 + +#define HCI_WRITE_DEF_POLICY_SETTINGS_OFF 0 + /* Write Default Policy Settings */ + + /* Flow Specification */ +HCI_API extern BOOLEAN btsnd_hcic_flow_specification(UINT16 handle, UINT8 flags, + UINT8 flow_direct, + UINT8 service_type, + UINT32 token_rate, + UINT32 token_bucket_size, + UINT32 peak, UINT32 latency); + +#define HCIC_PARAM_SIZE_FLOW_SPEC 21 + +#define HCI_FLOW_SPEC_HANDLE_OFF 0 +#define HCI_FLOW_SPEC_FLAGS_OFF 2 +#define HCI_FLOW_SPEC_FLOW_DIRECT_OFF 3 +#define HCI_FLOW_SPEC_SERVICE_TYPE_OFF 4 +#define HCI_FLOW_SPEC_TOKEN_RATE_OFF 5 +#define HCI_FLOW_SPEC_TOKEN_BUCKET_SIZE_OFF 9 +#define HCI_FLOW_SPEC_PEAK_BANDWIDTH_OFF 13 +#define HCI_FLOW_SPEC_LATENCY_OFF 17 + /* Flow Specification */ + +/****************************************** +** Lisbon Features +*******************************************/ +#if BTM_SSR_INCLUDED == TRUE + /* Sniff Subrating */ +HCI_API extern BOOLEAN btsnd_hcic_sniff_sub_rate(UINT16 handle, UINT16 max_lat, + UINT16 min_remote_lat, + UINT16 min_local_lat); + +#define HCIC_PARAM_SIZE_SNIFF_SUB_RATE 8 + +#define HCI_SNIFF_SUB_RATE_HANDLE_OFF 0 +#define HCI_SNIFF_SUB_RATE_MAX_LAT_OFF 2 +#define HCI_SNIFF_SUB_RATE_MIN_REM_LAT_OFF 4 +#define HCI_SNIFF_SUB_RATE_MIN_LOC_LAT_OFF 6 + /* Sniff Subrating */ + +#else /* BTM_SSR_INCLUDED == FALSE */ + +#define btsnd_hcic_sniff_sub_rate(handle, max_lat, min_remote_lat, min_local_lat) FALSE + +#endif /* BTM_SSR_INCLUDED */ + + /* Extended Inquiry Response */ +#if (BTM_EIR_SERVER_INCLUDED == TRUE) +HCI_API extern void btsnd_hcic_write_ext_inquiry_response(void *buffer, UINT8 fec_req); + +#define HCIC_PARAM_SIZE_EXT_INQ_RESP 241 + +#define HCIC_EXT_INQ_RESP_FEC_OFF 0 +#define HCIC_EXT_INQ_RESP_RESPONSE 1 + +HCI_API extern BOOLEAN btsnd_hcic_read_ext_inquiry_response(void); /* Read Extended Inquiry Response */ +#else +#define btsnd_hcic_write_ext_inquiry_response(buffer, fec_req) +#define btsnd_hcic_read_ext_inquiry_response() FALSE +#endif + /* Write Simple Pairing Mode */ +/**** Simple Pairing Commands ****/ +HCI_API extern BOOLEAN btsnd_hcic_write_simple_pairing_mode(UINT8 mode); + +#define HCIC_PARAM_SIZE_W_SIMP_PAIR 1 + +#define HCIC_WRITE_SP_MODE_OFF 0 + + +HCI_API extern BOOLEAN btsnd_hcic_read_simple_pairing_mode (void); + +#define HCIC_PARAM_SIZE_R_SIMP_PAIR 0 + + /* Write Simple Pairing Debug Mode */ +HCI_API extern BOOLEAN btsnd_hcic_write_simp_pair_debug_mode(UINT8 debug_mode); + +#define HCIC_PARAM_SIZE_SIMP_PAIR_DBUG 1 + +#define HCIC_WRITE_SP_DBUG_MODE_OFF 0 + + /* IO Capabilities Response */ +HCI_API extern BOOLEAN btsnd_hcic_io_cap_req_reply (BD_ADDR bd_addr, UINT8 capability, + UINT8 oob_present, UINT8 auth_req); + +#define HCIC_PARAM_SIZE_IO_CAP_RESP 9 + +#define HCI_IO_CAP_BD_ADDR_OFF 0 +#define HCI_IO_CAPABILITY_OFF 6 +#define HCI_IO_CAP_OOB_DATA_OFF 7 +#define HCI_IO_CAP_AUTH_REQ_OFF 8 + + /* IO Capabilities Req Neg Reply */ +HCI_API extern BOOLEAN btsnd_hcic_io_cap_req_neg_reply (BD_ADDR bd_addr, UINT8 err_code); + +#define HCIC_PARAM_SIZE_IO_CAP_NEG_REPLY 7 + +#define HCI_IO_CAP_NR_BD_ADDR_OFF 0 +#define HCI_IO_CAP_NR_ERR_CODE 6 + + /* Read Local OOB Data */ +HCI_API extern BOOLEAN btsnd_hcic_read_local_oob_data (void); + +#define HCIC_PARAM_SIZE_R_LOCAL_OOB 0 + + +HCI_API extern BOOLEAN btsnd_hcic_user_conf_reply (BD_ADDR bd_addr, BOOLEAN is_yes); + +#define HCIC_PARAM_SIZE_UCONF_REPLY 6 + +#define HCI_USER_CONF_BD_ADDR_OFF 0 + + +HCI_API extern BOOLEAN btsnd_hcic_user_passkey_reply (BD_ADDR bd_addr, UINT32 value); + +#define HCIC_PARAM_SIZE_U_PKEY_REPLY 10 + +#define HCI_USER_PASSKEY_BD_ADDR_OFF 0 +#define HCI_USER_PASSKEY_VALUE_OFF 6 + + +HCI_API extern BOOLEAN btsnd_hcic_user_passkey_neg_reply (BD_ADDR bd_addr); + +#define HCIC_PARAM_SIZE_U_PKEY_NEG_REPLY 6 + +#define HCI_USER_PASSKEY_NEG_BD_ADDR_OFF 0 + + /* Remote OOB Data Request Reply */ +HCI_API extern BOOLEAN btsnd_hcic_rem_oob_reply (BD_ADDR bd_addr, UINT8 *p_c, + UINT8 *p_r); + +#define HCIC_PARAM_SIZE_REM_OOB_REPLY 38 + +#define HCI_REM_OOB_DATA_BD_ADDR_OFF 0 +#define HCI_REM_OOB_DATA_C_OFF 6 +#define HCI_REM_OOB_DATA_R_OFF 22 + + /* Remote OOB Data Request Negative Reply */ +HCI_API extern BOOLEAN btsnd_hcic_rem_oob_neg_reply (BD_ADDR bd_addr); + +#define HCIC_PARAM_SIZE_REM_OOB_NEG_REPLY 6 + +#define HCI_REM_OOB_DATA_NEG_BD_ADDR_OFF 0 + + /* Read Tx Power Level */ +HCI_API extern BOOLEAN btsnd_hcic_read_inq_tx_power (void); + +#define HCIC_PARAM_SIZE_R_TX_POWER 0 + + /* Write Tx Power Level */ +HCI_API extern BOOLEAN btsnd_hcic_write_inq_tx_power (INT8 level); + +#define HCIC_PARAM_SIZE_W_TX_POWER 1 + +#define HCIC_WRITE_TX_POWER_LEVEL_OFF 0 + /* Read Default Erroneous Data Reporting */ +HCI_API extern BOOLEAN btsnd_hcic_read_default_erroneous_data_rpt (void); + +#define HCIC_PARAM_SIZE_R_ERR_DATA_RPT 0 + + /* Write Default Erroneous Data Reporting */ +HCI_API extern BOOLEAN btsnd_hcic_write_default_erroneous_data_rpt (UINT8 level); + +#define HCIC_PARAM_SIZE_W_ERR_DATA_RPT 1 + +#define HCIC_WRITE_ERR_DATA_RPT_OFF 0 + + +#if L2CAP_NON_FLUSHABLE_PB_INCLUDED == TRUE +HCI_API extern BOOLEAN btsnd_hcic_enhanced_flush (UINT16 handle, UINT8 packet_type); + +#define HCIC_PARAM_SIZE_ENHANCED_FLUSH 3 +#endif + + +HCI_API extern BOOLEAN btsnd_hcic_send_keypress_notif (BD_ADDR bd_addr, UINT8 notif); + +#define HCIC_PARAM_SIZE_SEND_KEYPRESS_NOTIF 7 + +#define HCI_SEND_KEYPRESS_NOTIF_BD_ADDR_OFF 0 +#define HCI_SEND_KEYPRESS_NOTIF_NOTIF_OFF 6 + + +HCI_API extern BOOLEAN btsnd_hcic_refresh_encryption_key(UINT16 handle); /* Refresh Encryption Key */ + +/**** end of Simple Pairing Commands ****/ + + +HCI_API extern BOOLEAN btsnd_hcic_set_event_mask(UINT8 local_controller_id, BT_EVENT_MASK evt_mask); + +#define HCIC_PARAM_SIZE_SET_EVENT_MASK 8 +#define HCI_EVENT_MASK_MASK_OFF 0 + /* Set Event Mask */ + + /* Reset */ +HCI_API extern BOOLEAN btsnd_hcic_set_event_mask_page_2 (UINT8 local_controller_id, + BT_EVENT_MASK event_mask); + +#define HCIC_PARAM_SIZE_SET_EVENT_MASK_PAGE_2 8 +#define HCI_EVENT_MASK_MASK_OFF 0 + /* Set Event Mask Page 2 */ + + /* Reset */ +HCI_API extern BOOLEAN btsnd_hcic_reset(UINT8 local_controller_id); + +#define HCIC_PARAM_SIZE_RESET 0 + /* Reset */ + + /* Store Current Settings */ +#define MAX_FILT_COND (sizeof (BD_ADDR) + 1) + +HCI_API extern BOOLEAN btsnd_hcic_set_event_filter(UINT8 filt_type, + UINT8 filt_cond_type, + UINT8 *filt_cond, + UINT8 filt_cond_len); + +#define HCIC_PARAM_SIZE_SET_EVT_FILTER 9 + +#define HCI_FILT_COND_FILT_TYPE_OFF 0 +#define HCI_FILT_COND_COND_TYPE_OFF 1 +#define HCI_FILT_COND_FILT_OFF 2 + /* Set Event Filter */ + +HCI_API extern BOOLEAN btsnd_hcic_flush(UINT8 local_controller_id, UINT16 handle); /* Flush */ + + /* Create New Unit Type */ +HCI_API extern BOOLEAN btsnd_hcic_new_unit_key(void); + +#define HCIC_PARAM_SIZE_NEW_UNIT_KEY 0 + /* Create New Unit Type */ + + /* Read Stored Key */ +HCI_API extern BOOLEAN btsnd_hcic_read_stored_key (BD_ADDR bd_addr, + BOOLEAN read_all_flag); + +#define HCIC_PARAM_SIZE_READ_STORED_KEY 7 + +#define HCI_READ_KEY_BD_ADDR_OFF 0 +#define HCI_READ_KEY_ALL_FLAG_OFF 6 + /* Read Stored Key */ + +#define MAX_WRITE_KEYS 10 + /* Write Stored Key */ +HCI_API extern BOOLEAN btsnd_hcic_write_stored_key (UINT8 num_keys, BD_ADDR *bd_addr, + LINK_KEY *link_key); + +#define HCIC_PARAM_SIZE_WRITE_STORED_KEY sizeof(btmsg_hcic_write_stored_key_t) + +#define HCI_WRITE_KEY_NUM_KEYS_OFF 0 +#define HCI_WRITE_KEY_BD_ADDR_OFF 1 +#define HCI_WRITE_KEY_KEY_OFF 7 +/* only 0x0b keys cab be sent in one HCI command */ +#define HCI_MAX_NUM_OF_LINK_KEYS_PER_CMMD 0x0b + /* Write Stored Key */ + + /* Delete Stored Key */ +HCI_API extern BOOLEAN btsnd_hcic_delete_stored_key (BD_ADDR bd_addr, BOOLEAN delete_all_flag); + +#define HCIC_PARAM_SIZE_DELETE_STORED_KEY 7 + +#define HCI_DELETE_KEY_BD_ADDR_OFF 0 +#define HCI_DELETE_KEY_ALL_FLAG_OFF 6 + /* Delete Stored Key */ + + /* Change Local Name */ +HCI_API extern BOOLEAN btsnd_hcic_change_name(BD_NAME name); + +#define HCIC_PARAM_SIZE_CHANGE_NAME BD_NAME_LEN + +#define HCI_CHANGE_NAME_NAME_OFF 0 + /* Change Local Name */ + + +#define HCIC_PARAM_SIZE_READ_CMD 0 + +#define HCIC_PARAM_SIZE_WRITE_PARAM1 1 + +#define HCIC_WRITE_PARAM1_PARAM_OFF 0 + +#define HCIC_PARAM_SIZE_WRITE_PARAM2 2 + +#define HCIC_WRITE_PARAM2_PARAM_OFF 0 + +#define HCIC_PARAM_SIZE_WRITE_PARAM3 3 + +#define HCIC_WRITE_PARAM3_PARAM_OFF 0 + +#define HCIC_PARAM_SIZE_SET_AFH_CHANNELS 10 + +HCI_API extern BOOLEAN btsnd_hcic_read_pin_type(void); /* Read PIN Type */ +HCI_API extern BOOLEAN btsnd_hcic_write_pin_type(UINT8 type); /* Write PIN Type */ +HCI_API extern BOOLEAN btsnd_hcic_read_auto_accept(void); /* Read Auto Accept */ +HCI_API extern BOOLEAN btsnd_hcic_write_auto_accept(UINT8 flag); /* Write Auto Accept */ +HCI_API extern BOOLEAN btsnd_hcic_read_name (void); /* Read Local Name */ +HCI_API extern BOOLEAN btsnd_hcic_read_conn_acc_tout(UINT8 local_controller_id); /* Read Connection Accept Timout */ +HCI_API extern BOOLEAN btsnd_hcic_write_conn_acc_tout(UINT8 local_controller_id, UINT16 tout); /* Write Connection Accept Timout */ +HCI_API extern BOOLEAN btsnd_hcic_read_page_tout(void); /* Read Page Timout */ +HCI_API extern BOOLEAN btsnd_hcic_write_page_tout(UINT16 timeout); /* Write Page Timout */ +HCI_API extern BOOLEAN btsnd_hcic_read_scan_enable(void); /* Read Scan Enable */ +HCI_API extern BOOLEAN btsnd_hcic_write_scan_enable(UINT8 flag); /* Write Scan Enable */ +HCI_API extern BOOLEAN btsnd_hcic_read_pagescan_cfg(void); /* Read Page Scan Activity */ + +HCI_API extern BOOLEAN btsnd_hcic_write_pagescan_cfg(UINT16 interval, + UINT16 window); /* Write Page Scan Activity */ + +#define HCIC_PARAM_SIZE_WRITE_PAGESCAN_CFG 4 + +#define HCI_SCAN_CFG_INTERVAL_OFF 0 +#define HCI_SCAN_CFG_WINDOW_OFF 2 + /* Write Page Scan Activity */ + +HCI_API extern BOOLEAN btsnd_hcic_read_inqscan_cfg(void); /* Read Inquiry Scan Activity */ + + /* Write Inquiry Scan Activity */ +HCI_API extern BOOLEAN btsnd_hcic_write_inqscan_cfg(UINT16 interval, UINT16 window); + +#define HCIC_PARAM_SIZE_WRITE_INQSCAN_CFG 4 + +#define HCI_SCAN_CFG_INTERVAL_OFF 0 +#define HCI_SCAN_CFG_WINDOW_OFF 2 + /* Write Inquiry Scan Activity */ + +HCI_API extern BOOLEAN btsnd_hcic_read_auth_enable(void); /* Read Authentication Enable */ +HCI_API extern BOOLEAN btsnd_hcic_write_auth_enable(UINT8 flag); /* Write Authentication Enable */ +HCI_API extern BOOLEAN btsnd_hcic_read_encr_mode (void); /* Read encryption mode */ +HCI_API extern BOOLEAN btsnd_hcic_write_encr_mode (UINT8 mode); /* Write encryption mode */ +HCI_API extern BOOLEAN btsnd_hcic_read_dev_class(void); /* Read Class of Device */ +HCI_API extern BOOLEAN btsnd_hcic_write_dev_class(DEV_CLASS dev); /* Write Class of Device */ +HCI_API extern BOOLEAN btsnd_hcic_read_voice_settings(void); /* Read Voice Settings */ +HCI_API extern BOOLEAN btsnd_hcic_write_voice_settings(UINT16 flags); /* Write Voice Settings */ + +/* Host Controller to Host flow control */ +#define HCI_HOST_FLOW_CTRL_OFF 0 +#define HCI_HOST_FLOW_CTRL_ACL_ON 1 +#define HCI_HOST_FLOW_CTRL_SCO_ON 2 +#define HCI_HOST_FLOW_CTRL_BOTH_ON 3 + +HCI_API extern BOOLEAN btsnd_hcic_set_host_flow_ctrl (UINT8 value); /* Enable/disable flow control toward host */ + + +HCI_API extern BOOLEAN btsnd_hcic_read_auto_flush_tout(UINT16 handle); /* Read Retransmit Timout */ + +HCI_API extern BOOLEAN btsnd_hcic_write_auto_flush_tout(UINT16 handle, + UINT16 timeout); /* Write Retransmit Timout */ + +#define HCIC_PARAM_SIZE_WRITE_AUTO_FLUSH_TOUT 4 + +#define HCI_FLUSH_TOUT_HANDLE_OFF 0 +#define HCI_FLUSH_TOUT_TOUT_OFF 2 + +HCI_API extern BOOLEAN btsnd_hcic_read_num_bcast_xmit(void); /* Read Num Broadcast Retransmits */ +HCI_API extern BOOLEAN btsnd_hcic_write_num_bcast_xmit(UINT8 num); /* Write Num Broadcast Retransmits */ +HCI_API extern BOOLEAN btsnd_hcic_read_hold_mode_act(void); /* Read Hold Mode Activity */ +HCI_API extern BOOLEAN btsnd_hcic_write_hold_mode_act(UINT8 flags); /* Write Hold Mode Activity */ + +HCI_API extern BOOLEAN btsnd_hcic_read_tx_power(UINT16 handle, UINT8 type); /* Read Tx Power */ + +#define HCIC_PARAM_SIZE_READ_TX_POWER 3 + +#define HCI_READ_TX_POWER_HANDLE_OFF 0 +#define HCI_READ_TX_POWER_TYPE_OFF 2 + +/* Read transmit power level parameter */ +#define HCI_READ_CURRENT 0x00 +#define HCI_READ_MAXIMUM 0x01 + +HCI_API extern BOOLEAN btsnd_hcic_read_sco_flow_enable(void); /* Read Authentication Enable */ +HCI_API extern BOOLEAN btsnd_hcic_write_sco_flow_enable(UINT8 flag); /* Write Authentication Enable */ + + /* Set Host Buffer Size */ +HCI_API extern BOOLEAN btsnd_hcic_set_host_buf_size (UINT16 acl_len, + UINT8 sco_len, + UINT16 acl_num, + UINT16 sco_num); + +#define HCIC_PARAM_SIZE_SET_HOST_BUF_SIZE 7 + +#define HCI_HOST_BUF_SIZE_ACL_LEN_OFF 0 +#define HCI_HOST_BUF_SIZE_SCO_LEN_OFF 2 +#define HCI_HOST_BUF_SIZE_ACL_NUM_OFF 3 +#define HCI_HOST_BUF_SIZE_SCO_NUM_OFF 5 + + +HCI_API extern BOOLEAN btsnd_hcic_host_num_xmitted_pkts (UINT8 num_handles, + UINT16 *handle, + UINT16 *num_pkts); /* Set Host Buffer Size */ + +#define HCIC_PARAM_SIZE_NUM_PKTS_DONE_SIZE sizeof(btmsg_hcic_num_pkts_done_t) + +#define MAX_DATA_HANDLES 10 + +#define HCI_PKTS_DONE_NUM_HANDLES_OFF 0 +#define HCI_PKTS_DONE_HANDLE_OFF 1 +#define HCI_PKTS_DONE_NUM_PKTS_OFF 3 + +HCI_API extern BOOLEAN btsnd_hcic_read_link_super_tout(UINT8 local_controller_id, UINT16 handle); /* Read Link Supervision Timeout */ + + /* Write Link Supervision Timeout */ +HCI_API extern BOOLEAN btsnd_hcic_write_link_super_tout(UINT8 local_controller_id, UINT16 handle, UINT16 timeout); + +#define HCIC_PARAM_SIZE_WRITE_LINK_SUPER_TOUT 4 + +#define HCI_LINK_SUPER_TOUT_HANDLE_OFF 0 +#define HCI_LINK_SUPER_TOUT_TOUT_OFF 2 + /* Write Link Supervision Timeout */ + +HCI_API extern BOOLEAN btsnd_hcic_read_max_iac (void); /* Read Num Supported IAC */ +HCI_API extern BOOLEAN btsnd_hcic_read_cur_iac_lap (void); /* Read Current IAC LAP */ + +HCI_API extern BOOLEAN btsnd_hcic_write_cur_iac_lap (UINT8 num_cur_iac, + LAP * const iac_lap); /* Write Current IAC LAP */ + +#define MAX_IAC_LAPS 0x40 + +#define HCI_WRITE_IAC_LAP_NUM_OFF 0 +#define HCI_WRITE_IAC_LAP_LAP_OFF 1 + /* Write Current IAC LAP */ + + /* Read Clock */ +HCI_API extern BOOLEAN btsnd_hcic_read_clock (UINT16 handle, UINT8 which_clock); + +#define HCIC_PARAM_SIZE_READ_CLOCK 3 + +#define HCI_READ_CLOCK_HANDLE_OFF 0 +#define HCI_READ_CLOCK_WHICH_CLOCK 2 + /* Read Clock */ + +#ifdef TESTER_ENABLE + +#define HCIC_PARAM_SIZE_ENTER_TEST_MODE 2 + +#define HCI_ENTER_TEST_HANDLE_OFF 0 + +#define HCIC_PARAM_SIZE_TEST_CNTRL 10 +#define HCI_TEST_CNTRL_HANDLE_OFF 0 +#define HCI_TEST_CNTRL_SCENARIO_OFF 2 +#define HCI_TEST_CNTRL_HOPPINGMODE_OFF 3 +#define HCI_TEST_CNTRL_TX_FREQ_OFF 4 +#define HCI_TEST_CNTRL_RX_FREQ_OFF 5 +#define HCI_TEST_CNTRL_PWR_CNTRL_MODE_OFF 6 +#define HCI_TEST_CNTRL_POLL_PERIOD_OFF 7 +#define HCI_TEST_CNTRL_PKT_TYPE_OFF 8 +#define HCI_TEST_CNTRL_LENGTH_OFF 9 + +#endif + +HCI_API extern BOOLEAN btsnd_hcic_read_page_scan_per (void); /* Read Page Scan Period Mode */ +HCI_API extern BOOLEAN btsnd_hcic_write_page_scan_per (UINT8 mode); /* Write Page Scan Period Mode */ +HCI_API extern BOOLEAN btsnd_hcic_read_page_scan_mode (void); /* Read Page Scan Mode */ +HCI_API extern BOOLEAN btsnd_hcic_write_page_scan_mode (UINT8 mode); /* Write Page Scan Mode */ +HCI_API extern BOOLEAN btsnd_hcic_read_local_ver (UINT8 local_controller_id); /* Read Local Version Info */ +HCI_API extern BOOLEAN btsnd_hcic_read_local_supported_cmds (UINT8 local_controller_id); /* Read Local Supported Commands */ +HCI_API extern BOOLEAN btsnd_hcic_read_local_features (void); /* Read Local Supported Features */ +HCI_API extern BOOLEAN btsnd_hcic_read_buffer_size (void); /* Read Local buffer sizes */ +HCI_API extern BOOLEAN btsnd_hcic_read_country_code (void); /* Read Country Code */ +HCI_API extern BOOLEAN btsnd_hcic_read_bd_addr (void); /* Read Local BD_ADDR */ +HCI_API extern BOOLEAN btsnd_hcic_read_fail_contact_count (UINT8 local_controller_id, UINT16 handle); /* Read Failed Contact Counter */ +HCI_API extern BOOLEAN btsnd_hcic_reset_fail_contact_count (UINT8 local_controller_id, UINT16 handle);/* Reset Failed Contact Counter */ +HCI_API extern BOOLEAN btsnd_hcic_get_link_quality (UINT16 handle); /* Get Link Quality */ +HCI_API extern BOOLEAN btsnd_hcic_read_rssi (UINT16 handle); /* Read RSSI */ +HCI_API extern BOOLEAN btsnd_hcic_read_loopback_mode (void); /* Read Loopback Mode */ +HCI_API extern BOOLEAN btsnd_hcic_write_loopback_mode (UINT8 mode); /* Write Loopback Mode */ +HCI_API extern BOOLEAN btsnd_hcic_enable_test_mode (void); /* Enable Device Under Test Mode */ +HCI_API extern BOOLEAN btsnd_hcic_write_pagescan_type(UINT8 type); /* Write Page Scan Type */ +HCI_API extern BOOLEAN btsnd_hcic_read_pagescan_type(void); /* Read Page Scan Type */ +HCI_API extern BOOLEAN btsnd_hcic_write_inqscan_type(UINT8 type); /* Write Inquiry Scan Type */ +HCI_API extern BOOLEAN btsnd_hcic_read_inqscan_type(void); /* Read Inquiry Scan Type */ +HCI_API extern BOOLEAN btsnd_hcic_write_inquiry_mode(UINT8 type); /* Write Inquiry Mode */ +HCI_API extern BOOLEAN btsnd_hcic_read_inquiry_mode(void); /* Read Inquiry Mode */ +HCI_API extern BOOLEAN btsnd_hcic_set_afh_channels (UINT8 first, UINT8 last); +HCI_API extern BOOLEAN btsnd_hcic_write_afh_channel_assessment_mode (UINT8 mode); +HCI_API extern BOOLEAN btsnd_hcic_set_afh_host_channel_class (UINT8 *p_afhchannelmap); +HCI_API extern BOOLEAN btsnd_hcic_read_afh_channel_assessment_mode(void); +HCI_API extern BOOLEAN btsnd_hcic_read_afh_channel_map (UINT16 handle); +HCI_API extern BOOLEAN btsnd_hcic_nop(void); /* NOP */ + + /* Send HCI Data */ +HCI_API extern void btsnd_hcic_data (BT_HDR *p_buf, UINT16 len, UINT16 handle, UINT8 boundary, UINT8 broadcast); + +#define HCI_DATA_HANDLE_MASK 0x0FFF + +#define HCID_GET_HANDLE_EVENT(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset) + \ + (*((UINT8 *)((p) + 1) + p->offset + 1) << 8))) + +#define HCID_GET_HANDLE(u16) (UINT16)((u16) & HCI_DATA_HANDLE_MASK) + +#define HCI_DATA_EVENT_MASK 3 +#define HCI_DATA_EVENT_OFFSET 12 +#define HCID_GET_EVENT(u16) (UINT8)(((u16) >> HCI_DATA_EVENT_OFFSET) & HCI_DATA_EVENT_MASK) + +#define HCI_DATA_BCAST_MASK 3 +#define HCI_DATA_BCAST_OFFSET 10 +#define HCID_GET_BCAST(u16) (UINT8)(((u16) >> HCI_DATA_BCAST_OFFSET) & HCI_DATA_BCAST_MASK) + +#define HCID_GET_ACL_LEN(p) (UINT16)((*((UINT8 *)((p) + 1) + p->offset + 2) + \ + (*((UINT8 *)((p) + 1) + p->offset + 3) << 8))) + +#define HCID_HEADER_SIZE 4 + /* Send HCI Data */ + +#define HCID_GET_SCO_LEN(p) (*((UINT8 *)((p) + 1) + p->offset + 2)) + +HCI_API extern void btsnd_hcic_vendor_spec_cmd ( + void *buffer, UINT16 opcode, + UINT8 len, UINT8 *p_data, + void *p_cmd_cplt_cback); + + +/********************************************************************************* +** ** +** H C I E V E N T S ** +** ** +*********************************************************************************/ + +/* Inquiry Complete Event */ +HCI_API extern void btsnd_hcie_inq_comp(void *buffer, UINT8 status); + +#define HCIE_PARAM_SIZE_INQ_COMP 1 + +/* Inquiry Response Event */ +HCI_API extern void btsnd_hcie_inq_res(void *buffer, UINT8 num_resp, UINT8 **bd_addr, + UINT8 *page_scan_rep_mode, UINT8 *page_scan_per_mode, + UINT8 *page_scan_mode, UINT8 **dev_class, + UINT16 *clock_offset); + +/* Connection Complete Event */ +HCI_API extern void btsnd_hcie_connection_comp(void *buffer, UINT8 status, UINT16 handle, + BD_ADDR bd_addr, UINT8 link_type, UINT8 encr_mode); + +#define HCIE_PARAM_SIZE_CONNECTION_COMP 11 + + +#define HCI_LINK_TYPE_SCO 0x00 +#define HCI_LINK_TYPE_ACL 0x01 + +#define HCI_ENCRYPT_MODE_DISABLED 0x00 +#define HCI_ENCRYPT_MODE_POINT_TO_POINT 0x01 +#define HCI_ENCRYPT_MODE_ALL 0x02 + + +/* Connection Request Event */ +HCI_API extern void btsnd_hcie_connection_req(void *buffer, BD_ADDR bd_addr, DEV_CLASS dev_class, UINT8 link_type); + +#define HCIE_PARAM_SIZE_CONNECTION_REQ 10 + +#define HCI_LINK_TYPE_SCO 0x00 +#define HCI_LINK_TYPE_ACL 0x01 + + +/* Disonnection Complete Event */ +HCI_API extern void btsnd_hcie_disc_comp(void *buffer, UINT8 status, UINT16 handle, UINT8 reason); + +#define HCIE_PARAM_SIZE_DISC_COMP 4 + + +/* Authentication Complete Event */ +HCI_API extern void btsnd_hcie_auth_comp (void *buffer, UINT8 status, UINT16 handle); + +#define HCIE_PARAM_SIZE_AUTH_COMP 3 + + +/* Remote Name Request Complete Event */ +HCI_API extern void btsnd_hcie_rmt_name_req_comp(void *buffer, UINT8 status, BD_ADDR bd_addr, BD_NAME name); + +#define HCIE_PARAM_SIZE_RMT_NAME_REQ_COMP (1 + BD_ADDR_LEN + BD_NAME_LEN) + + +/* Encryption Change Event */ +HCI_API extern void btsnd_hcie_encryption_change (void *buffer, UINT8 status, UINT16 handle, BOOLEAN enable); + +#define HCIE_PARAM_SIZE_ENCR_CHANGE 4 + + +/* Connection Link Key Change Event */ +HCI_API extern void btsnd_hcie_conn_link_key_change (void *buffer, UINT8 status, UINT16 handle); + +#define HCIE_PARAM_SIZE_LINK_KEY_CHANGE 3 + + +/* Encryption Key Refresh Complete Event */ +HCI_API extern void btsnd_hcie_encrypt_key_refresh (void *buffer, UINT8 status, UINT16 handle); + +#define HCIE_PARAM_SIZE_ENCRYPT_KEY_REFRESH 3 + + +/* Master Link Key Complete Event */ +HCI_API extern void btsnd_hcie_master_link_key (void *buffer, UINT8 status, UINT16 handle, UINT8 flag); + +#define HCIE_PARAM_SIZE_MASTER_LINK_KEY 4 + + +/* Read Remote Supported Features Complete Event */ +HCI_API extern void btsnd_hcie_read_rmt_features (void *buffer, UINT8 status, UINT16 handle, UINT8 *features); + +#define LMP_FEATURES_SIZE 8 +#define HCIE_PARAM_SIZE_READ_RMT_FEATURES 11 + + +/* Read Remote Extended Features Complete Event */ +HCI_API extern void btsnd_hcie_read_rmt_ext_features (void *buffer, UINT8 status, UINT16 handle, UINT8 page_num, + UINT8 max_page_num, UINT8 *features); + +#define EXT_LMP_FEATURES_SIZE 8 +#define HCIE_PARAM_SIZE_READ_RMT_EXT_FEATURES 13 + + +/* Read Remote Version Complete Event */ +HCI_API extern void btsnd_hcie_read_rmt_version (void *buffer, UINT8 status, UINT16 handle, UINT8 version, + UINT16 comp_name, UINT16 sub_version); + +#define HCIE_PARAM_SIZE_READ_RMT_VERSION 8 + + +/* QOS setup complete */ +HCI_API extern void btsnd_hcie_qos_setup_compl (void *buffer, UINT8 status, UINT16 handle, UINT8 flags, + UINT8 service_type, UINT32 token_rate, UINT32 peak, + UINT32 latency, UINT32 delay_var); + +#define HCIE_PARAM_SIZE_QOS_SETUP_COMP 21 + + +/* Flow Specification complete */ +HCI_API extern void btsnd_hcie_flow_spec_compl (void *buffer, UINT8 status, UINT16 handle, UINT8 flags, + UINT8 flow_direction, UINT8 service_type, UINT32 token_rate, UINT32 token_bucket_size, + UINT32 peak, UINT32 latency); + +#define HCIE_PARAM_SIZE_FLOW_SPEC_COMP 22 + + +/* Command Complete Event */ +HCI_API extern void btsnd_hcie_cmd_comp(void *buffer, UINT8 max_host_cmds, UINT16 opcode, UINT8 status); + +#define HCIE_PARAM_SIZE_CMD_COMP 4 + + +/* Command Complete with pre-filled in parameters */ +HCI_API extern void btsnd_hcie_cmd_comp_params (void *buffer, UINT8 max_host_cmds, UINT16 cmd_opcode, UINT8 status); + +#define HCI_CMD_COMPL_PARAM_OFFSET 4 + + +/* Command Complete Event with 1-byte param */ +HCI_API extern void btsnd_hcie_cmd_comp_param1(void *buffer, UINT8 max_host_cmds, UINT16 opcode, + UINT8 status, UINT8 param1); + +#define HCIE_PARAM_SIZE_CMD_COMP_PARAM1 5 + +/* Command Complete Event with 2-byte param */ +HCI_API extern void btsnd_hcie_cmd_comp_param2(void *buffer, UINT8 max_host_cmds, UINT16 opcode, + UINT8 status, UINT16 param2); + +#define HCIE_PARAM_SIZE_CMD_COMP_PARAM2 6 + + +/* Command Complete Event with BD-addr as param */ +HCI_API extern void btsnd_hcie_cmd_comp_bd_addr(void *buffer, UINT8 max_host_cmds, UINT16 opcode, + UINT8 status, BD_ADDR bd_addr); + +#define HCIE_PARAM_SIZE_CMD_COMP_BD_ADDR 10 + + +/* Command Pending Event */ +HCI_API extern void btsnd_hcie_cmd_status (void *buffer, UINT8 status, UINT8 max_host_cmds, UINT16 opcode); + +#define HCIE_PARAM_SIZE_CMD_STATUS 4 + + +/* HW failure Event */ +HCI_API extern void btsnd_hcie_hw_failure (void *buffer, UINT8 code); + +#define HCIE_PARAM_SIZE_HW_FAILURE 1 + + +/* Flush Occured Event */ +HCI_API extern void btsnd_hcie_flush_occured (void *buffer, UINT16 handle); + +#define HCIE_PARAM_SIZE_FLUSH_OCCURED 2 + + +/* Role Changed Event */ +HCI_API extern void btsnd_hcie_role_change (void *buffer, UINT8 status, BD_ADDR bd_addr, UINT8 role); + +#define HCIE_PARAM_SIZE_ROLE_CHANGE 8 + + +/* Ready for Data Packets Event */ +HCI_API extern void btsnd_hcie_num_compl_pkts (void *buffer, UINT8 num_handles, UINT16 *p_handle, UINT16 *num_pkts); + +#define MAX_DATA_HANDLES 10 + + +/* Mode Change Event */ +HCI_API extern void btsnd_hcie_mode_change (void *buffer, UINT8 status, UINT16 handle, + UINT8 mode, UINT16 interval); + +#define HCIE_PARAM_SIZE_MODE_CHANGE 6 +#define MAX_DATA_HANDLES 10 + + + +/* Return Link Keys Event */ +HCI_API extern void btsnd_hcie_return_link_keys (void *buffer, UINT8 num_keys, BD_ADDR *bd_addr, LINK_KEY *link_key); + +/* This should not be more than 0x0b */ +#define MAX_LINK_KEYS 10 + + + +/* PIN Code Request Event */ +HCI_API extern void btsnd_hcie_pin_code_req (void *buffer, BD_ADDR bd_addr); + +#define HCIE_PARAM_SIZE_PIN_CODE_REQ 6 + + + +/* Link Key Request Event */ +HCI_API extern void btsnd_hcie_link_key_req (void *buffer, BD_ADDR bd_addr); + +#define HCIE_PARAM_SIZE_LINK_KEY_REQ 6 + + + +/* Link Key Notification Event */ +HCI_API extern void btsnd_hcie_link_key_notify (void *buffer, BD_ADDR bd_addr, LINK_KEY link_key, UINT8 key_type); + +#define HCIE_PARAM_SIZE_LINK_KEY_NOTIFY 23 + + + +/* Loopback Command Event */ +HCI_API extern void btsnd_hcie_loopback_command (void *buffer, UINT8 data_len, UINT8 *data); + +#define HCIE_PARAM_SIZE_LOOPBACK_COMMAND sizeof(btmsg_hcie_loopback_cmd_t) + + + +/* Data Buffer Overflow Event */ +HCI_API extern void btsnd_hcie_data_buf_overflow (void *buffer, UINT8 link_type); + +#define HCIE_PARAM_SIZE_DATA_BUF_OVERFLOW 1 + + + +/* Max Slots Change Event */ +HCI_API extern void btsnd_hcie_max_slots_change(void *buffer, UINT16 handle, UINT8 max_slots); + +#define HCIE_PARAM_SIZE_MAX_SLOTS_CHANGE 3 + + +/* Read Clock Offset Complet Event */ +HCI_API extern void btsnd_hcie_read_clock_off_comp(void *buffer, UINT8 status, UINT16 handle, + UINT16 clock_offset); + +#define HCIE_PARAM_SIZE_READ_CLOCK_OFF_COMP 5 + + + +/* Connection Packet Type Change Event */ +HCI_API extern void btsnd_hcie_pkt_type_change (void *buffer, UINT8 status, UINT16 handle, UINT16 pkt_type); + +#define HCIE_PARAM_SIZE_PKT_TYPE_CHANGE 5 + + + +/* QOS violation Event */ +HCI_API extern void btsnd_hcie_qos_violation (void *buffer, UINT16 handle); + +#define HCIE_PARAM_SIZE_QOS_VIOLATION 2 + + + +/* Page Scan Mode Change Event */ +HCI_API extern void btsnd_hcie_pagescan_mode_chng (void *buffer, BD_ADDR bd_addr, UINT8 mode); + +#define HCIE_PARAM_SIZE_PAGE_SCAN_MODE_CHNG 7 + + +/* Page Scan Repetition Mode Change Event */ +HCI_API extern void btsnd_hcie_pagescan_rep_mode_chng (void *buffer, BD_ADDR bd_addr, UINT8 mode); + +#define HCIE_PARAM_SIZE_PAGE_SCAN_REP_MODE_CHNG 7 + + +/* Sniff Sub Rate Event */ +HCI_API extern void btsnd_hcie_sniff_sub_rate(void *buffer, UINT8 status, UINT16 handle, UINT16 max_tx_lat, UINT16 max_rx_lat, + UINT16 min_remote_timeout, UINT16 min_local_timeout); + +#define HCIE_PARAM_SIZE_SNIFF_SUB_RATE 11 + + + +/* Extended Inquiry Result Event */ +HCI_API extern void btsnd_hcie_ext_inquiry_result(void *buffer, UINT8 num_resp, UINT8 **bd_addr, + UINT8 *page_scan_rep_mode, UINT8 *reserved, + UINT8 **dev_class, UINT16 *clock_offset, UINT8 *rssi, UINT8 *p_data); + + +#if (BLE_INCLUDED == TRUE) +/******************************************************************************** +** BLE Commands +** Note: "local_controller_id" is for transport, not counted in HCI message size +*********************************************************************************/ +#define HCIC_PARAM_SIZE_SET_USED_FEAT_CMD 8 +#define HCIC_PARAM_SIZE_WRITE_RANDOM_ADDR_CMD 6 +#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_PARAMS 15 +#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_RSP 31 +#define HCIC_PARAM_SIZE_WRITE_ADV_ENABLE 1 +#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_PARAM 7 +#define HCIC_PARAM_SIZE_BLE_WRITE_SCAN_ENABLE 2 +#define HCIC_PARAM_SIZE_BLE_CREATE_LL_CONN 25 +#define HCIC_PARAM_SIZE_BLE_CREATE_CONN_CANCEL 0 +#define HCIC_PARAM_SIZE_CLEAR_WHITE_LIST 0 +#define HCIC_PARAM_SIZE_ADD_WHITE_LIST 7 +#define HCIC_PARAM_SIZE_REMOVE_WHITE_LIST 7 +#define HCIC_PARAM_SIZE_BLE_UPD_LL_CONN_PARAMS 14 +#define HCIC_PARAM_SIZE_SET_HOST_CHNL_CLASS 5 +#define HCIC_PARAM_SIZE_READ_CHNL_MAP 2 +#define HCIC_PARAM_SIZE_BLE_READ_REMOTE_FEAT 2 +#define HCIC_PARAM_SIZE_BLE_ENCRYPT 32 +#define HCIC_PARAM_SIZE_BLE_RAND 0 + +#define HCIC_BLE_RAND_DI_SIZE 8 +#define HCIC_BLE_ENCRYT_KEY_SIZE 16 +#define HCIC_PARAM_SIZE_BLE_START_ENC (4 + HCIC_BLE_RAND_DI_SIZE + HCIC_BLE_ENCRYT_KEY_SIZE) +#define HCIC_PARAM_SIZE_LTK_REQ_REPLY (2 + HCIC_BLE_ENCRYT_KEY_SIZE) +#define HCIC_PARAM_SIZE_LTK_REQ_NEG_REPLY 2 +#define HCIC_BLE_CHNL_MAP_SIZE 5 +#define HCIC_PARAM_SIZE_BLE_WRITE_ADV_DATA 31 + +/* ULP HCI command */ +HCI_API extern BOOLEAN btsnd_hcic_ble_reset(void); + +HCI_API extern BOOLEAN btsnd_hcic_ble_set_evt_mask (BT_EVENT_MASK event_mask); + +HCI_API extern BOOLEAN btsnd_hcic_ble_read_buffer_size (void); + +HCI_API extern BOOLEAN btsnd_hcic_ble_read_local_spt_feat (void); + +HCI_API extern BOOLEAN btsnd_hcic_ble_set_local_used_feat (UINT8 feat_set[8]); + +HCI_API extern BOOLEAN btsnd_hcic_ble_set_random_addr (BD_ADDR random_addr); + +HCI_API extern BOOLEAN btsnd_hcic_ble_write_adv_params (UINT16 adv_int_min, UINT16 adv_int_max, + UINT8 adv_type, UINT8 addr_type_own, + UINT8 addr_type_dir, BD_ADDR direct_bda, + UINT8 channel_map, UINT8 adv_filter_policy); + +HCI_API extern BOOLEAN btsnd_hcic_ble_read_adv_chnl_tx_power (void); + +HCI_API extern BOOLEAN btsnd_hcic_ble_set_adv_data (UINT8 data_len, UINT8 *p_data); + +HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_rsp_data (UINT8 data_len, UINT8 *p_scan_rsp); + +HCI_API extern BOOLEAN btsnd_hcic_ble_set_adv_enable (UINT8 adv_enable); + +HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_params (UINT8 scan_type, + UINT16 scan_int, UINT16 scan_win, + UINT8 addr_type, UINT8 scan_filter_policy); + +HCI_API extern BOOLEAN btsnd_hcic_ble_set_scan_enable (UINT8 scan_enable, UINT8 duplicate); + +HCI_API extern BOOLEAN btsnd_hcic_ble_create_ll_conn (UINT16 scan_int, UINT16 scan_win, + UINT8 init_filter_policy, UINT8 addr_type_peer, BD_ADDR bda_peer, UINT8 addr_type_own, + UINT16 conn_int_min, UINT16 conn_int_max, UINT16 conn_latency, UINT16 conn_timeout, + UINT16 min_ce_len, UINT16 max_ce_len); + +HCI_API extern BOOLEAN btsnd_hcic_ble_create_conn_cancel (void); + +HCI_API extern BOOLEAN btsnd_hcic_ble_read_white_list_size (void); + +HCI_API extern BOOLEAN btsnd_hcic_ble_clear_white_list (void); + +HCI_API extern BOOLEAN btsnd_hcic_ble_add_white_list (UINT8 addr_type, BD_ADDR bda); + +HCI_API extern BOOLEAN btsnd_hcic_ble_remove_from_white_list (UINT8 addr_type, BD_ADDR bda); + +HCI_API extern BOOLEAN btsnd_hcic_ble_upd_ll_conn_params (UINT16 handle, UINT16 conn_int_min, UINT16 conn_int_max, + UINT16 conn_latency, UINT16 conn_timeout, UINT16 min_len, UINT16 max_len); + +HCI_API extern BOOLEAN btsnd_hcic_ble_set_host_chnl_class (UINT8 chnl_map[HCIC_BLE_CHNL_MAP_SIZE]); + +HCI_API extern BOOLEAN btsnd_hcic_ble_read_chnl_map (UINT16 handle); + +HCI_API extern BOOLEAN btsnd_hcic_ble_read_remote_feat ( UINT16 handle); + +HCI_API extern BOOLEAN btsnd_hcic_ble_encrypt (UINT8* key, UINT8 key_len, UINT8* plain_text, UINT8 pt_len, void *p_cmd_cplt_cback); + +HCI_API extern BOOLEAN btsnd_hcic_ble_rand (void *p_cmd_cplt_cback); + +HCI_API extern BOOLEAN btsnd_hcic_ble_start_enc ( UINT16 handle, + UINT8 rand[HCIC_BLE_RAND_DI_SIZE], + UINT16 ediv, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]); + +HCI_API extern BOOLEAN btsnd_hcic_ble_ltk_req_reply (UINT16 handle, UINT8 ltk[HCIC_BLE_ENCRYT_KEY_SIZE]); + +HCI_API extern BOOLEAN btsnd_hcic_ble_ltk_req_neg_reply (UINT16 handle); + +HCI_API extern BOOLEAN btsnd_hcic_ble_read_supported_states (void); + + +#endif /* BLE_INCLUDED */ + +#ifdef __cplusplus +} +#endif + +#endif + |