Modified Heimdall Frontend so it can find Heimdall CLI in /usr/local/bin on OS X. Also updated the OS X build files, as well as READMEs for all platforms.

6 files changed, 84 insertions, 71 deletions

diff --git a/Linux/README b/Linux/README
index 78cf3af..33a8bc0 100644
--- a/Linux/README
+++ b/Linux/README
@@ -183,7 +183,7 @@ Performing a Custom Flash with Heimdall Frontend:
 
 
 Flashing Firmware from Command Line:
-	
+
     1. Fully charge your phone (use the wall charger as it's faster).
 
     2. Download a decrypted device ROM or a Heimdall Firmware Package
@@ -218,10 +218,10 @@ Flashing Firmware from Command Line:
              button) after executing --no-reboot commands.
 
     8. Use the help and print-pit output to construct a command with all the
-	   files you want to flash.
+       files you want to flash.
 
        Here is an example that does a full flash and repartition on a GT-I9000:
-		
+
             heimdall flash --repartition --resume --pit s1_odin_20100512.pit --FACTORYFS factoryfs.rfs --CACHE cache.rfs --DBDATA dbdata.rfs --IBL+PBL boot.bin --SBL Sbl.bin --PARAM param.lfs --KERNEL zImage --MODEM modem.bin
 
     9. Heimdall will display the progress as it flashes so that you know things
@@ -499,13 +499,6 @@ Appendix B - Installing Heimdall from Source:
             sudo make install
             cd ..
 
-       NOTE: As an alternative to "sudo make install" you may chose to generate
-             a package by typing the following:
-
-                sudo checkinstall --pkgversion <version>
-
-             Where <version> is the current Heimdall release e.g. 1.3.0
-
     5. Done
 
 
@@ -514,25 +507,22 @@ Appendix C - Installing Heimdall Frontend from Source:
 
     1. Compile and install Heimdall, see Appendix B.
 
-    2. First make sure you have installed Qt 4.7 or later, available from:
+    2. First make sure you have installed Qt (4.7 or later, but prior to 5.0).
+       You can typically install Qt through your platforms package manager, or
+       alternatively download it from:
 
-          http://qt.nokia.com/downloads/
+          http://qt-project.org/downloads
 
     3. Open a terminal and navigate to the directory you extracted Heimdall to.
 
     4. Enter the following commands to compile and install Heimdall Frontend:
 
             cd heimdall-frontend
-            qmake-qt4 heimdall-frontend.pro
+            qmake-qt4
             make
             sudo make install
-
-       NOTE: As an alternative to "sudo make install" you may chose to generate
-             a package by typing the following:
-
-                sudo checkinstall --pkgversion <version>
-
-             Where <version> is the current Heimdall release e.g. 1.3.0
+            
+       NOTE: If qmake-qt4 does not exist on your platform, try qmake instead.
 
     5. Done
 
diff --git a/OSX/README.txt b/OSX/README.txt
index 47b0bf4..3b33cd4 100644
--- a/OSX/README.txt
+++ b/OSX/README.txt
@@ -19,7 +19,7 @@ Installing Heimdall and Heimdall Frontend Binaries:
     1. Run "Heimdall Suite.pkg" and follow the instructions.
 
     2. Reboot your system.
-		
+
     3. Done
 
 
@@ -187,7 +187,7 @@ Performing a Custom Flash with Heimdall Frontend:
 
 
 Flashing Firmware from Command Line:
-	
+
     1. Fully charge your phone (use the wall charger as it's faster).
 
     2. Download a decrypted device ROM or a Heimdall Firmware Package
@@ -226,7 +226,7 @@ Flashing Firmware from Command Line:
        file you want to flash.
 
        Here is an example that does a full flash and repartition on a GT-I9000:
-		
+
             heimdall flash --repartition --resume --pit s1_odin_20100512.pit --FACTORYFS factoryfs.rfs --CACHE cache.rfs --DBDATA dbdata.rfs --IBL+PBL boot.bin --SBL Sbl.bin --PARAM param.lfs --KERNEL zImage --MODEM modem.bin
 
     9. Heimdall will display the progress as it flashes so that you know things
@@ -479,24 +479,40 @@ be included.
 
 Appendix B - Installing Heimdall from Source:
 
-    1. First make sure you have installed XCode and pkgconfig.
-
-       NOTE: There are several different ways you can install pkgconfig, one
-             option is to use Macports (http://www.macports.org/).
-
-    2. Open a terminal and navigate to the directory you downloaded,
-       or extracted, Heimdall to.
-
-    3. Download, compile and install libusb-1.0:
-
-       http://www.libusb.org/
-
-       NOTE: Alternatively you may install Macport's libusb-devel package.
-
-    4. Enter the following commands to compile libpit.
+    PREREQUISITES:
+    
+          Heimdall requires C++11 (aka C++0x) functionality in order to compile.
+          Unfortunately, XCode includes an old version of GCC which does not
+          include support for C++11. XCode does include clang, which does
+          support C++11. However, clang's C++11 can only target OS X 10.7 or
+          newer. There are also slight compatibility issues between clang and
+          Qt, which is required in order to compile Heimdall Frontend. As such
+          these instructions will utilise GCC 4.7 installed via Homebrew.
+              
+          Xcode can be downloaded through the App store or from Apple's
+          developer website:
+          
+              https://developer.apple.com/xcode/
+          
+          Homebrew install instructions are available at:
+          
+              http://mxcl.github.io/homebrew/
+          
+    1. First make sure you have installed XCode and Homebrew (see above). Then
+       open a terminal and install GCC 4.7, pkgconfig and libusbx via Homebrew:
+    
+            brew tap homebrew/versions
+            brew install gcc47 pkgconfig libusbx
+            
+        NOTE: Installing GCC 4.7 will take a long time.
+
+    2. In a terminal navigate to the directory you downloaded (or extracted)
+       Heimdall to.
+
+    3. Enter the following commands to compile libpit.
 
             cd libpit
-            ./configure
+            ./configure CC=gcc-4.7 CXX=g++-4.7
             make
             cd ..
 
@@ -505,12 +521,12 @@ Appendix B - Installing Heimdall from Source:
     4. Enter the following commands to compile and install Heimdall:
 
             cd heimdall
-            ./configure
+            ./configure CC=gcc-4.7 CXX=g++-4.7
             make
             sudo make install
             cd ..
 
-    5. If you haven't installed the driver before, enter the following:
+    5. If you haven't installed the driver before, do the following:
 
             cd OSX
             sudo ./install-kext.sh
@@ -523,23 +539,17 @@ Appendix C - Installing Heimdall Frontend from Source:
 
     1. Compile and install Heimdall, see Appendix B.
 
-    2. First make sure you have installed XCode from your OS X install DVD.
-       You'll also need Qt 4.7 or later, available from:
+    2. Heimdall Frontend requires Qt (4.7 or later, but prior to 5.0), available
+       from:
 
-          http://qt.nokia.com/downloads/
+          http://qt-project.org/downloads
 
     3. Open a terminal and navigate to the directory you extracted Heimdall to.
 
     4. Enter the following commands to compile and install Heimdall Frontend:
 
             cd heimdall-frontend
-            qmake heimdall-frontend.pro
-
-    5. Open Finder and navigate to the heimdall-frontend sub-directory. Open
-       the newly created XCode project.
-
-    6. From the menu bar select Build -> Build. This outputs heimdall-frontend
-       to /Applications
-
-    7. Done
+            qmake -spec macx-g++ QMAKE_CC=gcc-4.7 QMAKE_CXX=g++-4.7
+            make
 
+    5. Done
diff --git a/Win32/README.txt b/Win32/README.txt
index 6480258..2214497 100644
--- a/Win32/README.txt
+++ b/Win32/README.txt
@@ -11,22 +11,23 @@ DISCLAIMER:
     for the result of your actions.

 

 

-These instructions were written for Windows Vista / Server 2008 however the

+These instructions were written for Windows 7 / Vista / Server 2008 however the

 producedure should be essentially the same for all supported versions of

 Windows (XP onwards).

 

 

 Troubleshooting:

 

-    1. If you get an error as follows:

+    1. If when you try launch Heimdall or Heimdall Frontend you receive a

+       similar to:

 

-            The program can't start because MSVCP100.dll is missing from your

+            The program can't start because MSVCP110.dll is missing from your

             computer.

 

-       This means that you haven't installed the Microsoft Visual C++ 2010

+       This means that you haven't installed the Microsoft Visual C++ 2012

        runtimes. The runtimes can be downloaded from Microsoft's website:

 

-            http://www.microsoft.com/download/en/details.aspx?id=5555

+            http://www.microsoft.com/en-au/download/details.aspx?id=30679

 

 

 

@@ -233,7 +234,7 @@ Performing a Custom Flash with Heimdall Frontend:
 

 

 Flashing Firmware from Command Line:

-	

+

     1. Fully charge your phone (use the wall charger as it's faster).

 

     2. Download a decrypted device ROM or a Heimdall Firmware Package

@@ -275,7 +276,7 @@ Flashing Firmware from Command Line:
        file you want to flash.

 

        Here is an example that does a full flash and repartition on a GT-I9000:

-		

+

             heimdall flash --repartition --resume --pit s1_odin_20100512.pit --FACTORYFS factoryfs.rfs --CACHE cache.rfs --DBDATA dbdata.rfs --IBL+PBL boot.bin --SBL Sbl.bin --PARAM param.lfs --KERNEL zImage --MODEM modem.bin

 

        NOTE: The above command assumes the files specified are installed in the

@@ -531,20 +532,20 @@ be included.
 

 Appendix B - Installing Heimdall Suite from Source

 

-    1. Ensure that you have both a version of Visual Studio 2010 with C++

-       support and Qt Developer Framework 4.7 (or newer) installed on your

-       system.

+    1. Ensure that you have both a version of Visual Studio 2012 with C++

+       support and Qt Developer Framework (4.7 or later, but prior to 5.0)

+       installed on your system.

 

-       A free version (Visual C++ 2010 Express) can be downloaded from

+       A free version (Visual C++ 2012 Express) can be downloaded from

        Microsoft's website:

 

-          http://www.microsoft.com/visualstudio/en-us/products/2010-editions/visual-cpp-express

+          http://www.microsoft.com/visualstudio/eng/products/visual-studio-express-products

 

-       Qt can also be downloaded freely from Nokia's website:

+       Qt can also be downloaded freely from:

 

-          http://qt.nokia.com/downloads/

+          http://qt-project.org/downloads

 

-    2. Open Heimdall/msvc2010.sln

+    2. Open msvc2012.sln

 

     3. From the Solutions Configuration drop-down change from "Debug" to

        "Release".

diff --git a/heimdall-frontend/Source/mainwindow.cpp b/heimdall-frontend/Source/mainwindow.cpp
index 02d7a62..46dc381 100644
--- a/heimdall-frontend/Source/mainwindow.cpp
+++ b/heimdall-frontend/Source/mainwindow.cpp
@@ -52,13 +52,19 @@ void MainWindow::StartHeimdall(const QStringList& arguments)
 		

 		QStringList paths;

 

-		// Ensure /usr/bin is in PATH

+		// Ensure /usr/local/bin and /usr/bin are in PATH.

 		for (int i = 0; i < environment.length(); i++)

 		{

 			if (environment[i].left(5) == "PATH=")

 			{

 				paths = environment[i].mid(5).split(':');

-				paths.prepend("/usr/bin");

+				

+				if (!paths.contains("/usr/local/bin"))

+          paths.prepend("/usr/local/bin");

+				

+				if (!paths.contains("/usr/bin"))

+          paths.prepend("/usr/bin");

+				

 				break;

 			}

 		}

@@ -71,6 +77,7 @@ void MainWindow::StartHeimdall(const QStringList& arguments)
 			

 			if (heimdallPath.length() > 0)

 			{

+        utilityOutputPlainTextEdit->clear();

 				heimdallFailed = false;

 				

 				if (heimdallPath[heimdallPath.length() - 1] != QDir::separator())

diff --git a/heimdall-frontend/heimdall-frontend.pro b/heimdall-frontend/heimdall-frontend.pro
index ecc6235..6cb5774 100644
--- a/heimdall-frontend/heimdall-frontend.pro
+++ b/heimdall-frontend/heimdall-frontend.pro
@@ -53,8 +53,13 @@ macx {
 	PRIVATE_FRAMEWORKS.path = Contents/Frameworks
 
 	QMAKE_BUNDLE_DATA += PRIVATE_FRAMEWORKS
+	LIBS += -L/usr/lib
 
 	config += x86 x86_64 ppc
+	
+	QMAKE_CFLAGS_X86_64 = -m64 -mmacosx-version-min=10.5
+	QMAKE_CXXFLAGS_X86_64 = $$QMAKE_CFLAGS_X86_64
+	QMAKE_LFLAGS_X86_64 = $$QMAKE_CFLAGS_X86_64
 
 	isEmpty(OUTPUTDIR) {
 		DESTDIR = /Applications
diff --git a/heimdall/configure.ac b/heimdall/configure.ac
index e900770..4654730 100644
--- a/heimdall/configure.ac
+++ b/heimdall/configure.ac
@@ -22,7 +22,7 @@ case $target in
 *-darwin*)

 	AC_DEFINE(OS_DARWIN, [], [Darwin backend])

 	AC_MSG_RESULT([Darwin/MacOS X])

-	AC_PROG_CXX([clang++])

+	AC_PROG_CXX

 	linuxtarget=false

 	;;

 *-mingw*)