diff options
Diffstat (limited to 'Heimdall/libusb-1.0/libusb/sync.c')
| -rw-r--r-- | Heimdall/libusb-1.0/libusb/sync.c | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/Heimdall/libusb-1.0/libusb/sync.c b/Heimdall/libusb-1.0/libusb/sync.c new file mode 100644 index 0000000..d040d98 --- /dev/null +++ b/Heimdall/libusb-1.0/libusb/sync.c @@ -0,0 +1,310 @@ +/* + * Synchronous I/O functions for libusb + * Copyright (C) 2007-2008 Daniel Drake <dsd@gentoo.org> + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2.1 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <config.h> +#include <errno.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> + +#include "libusbi.h" + +/** + * @defgroup syncio Synchronous device I/O + * + * This page documents libusb's synchronous (blocking) API for USB device I/O. + * This interface is easy to use but has some limitations. More advanced users + * may wish to consider using the \ref asyncio "asynchronous I/O API" instead. + */ + +static void LIBUSB_CALL ctrl_transfer_cb(struct libusb_transfer *transfer) +{ + int *completed = transfer->user_data; + *completed = 1; + usbi_dbg("actual_length=%d", transfer->actual_length); + /* caller interprets result and frees transfer */ +} + +/** \ingroup syncio + * Perform a USB control transfer. + * + * The direction of the transfer is inferred from the bmRequestType field of + * the setup packet. + * + * The wValue, wIndex and wLength fields values should be given in host-endian + * byte order. + * + * \param dev_handle a handle for the device to communicate with + * \param bmRequestType the request type field for the setup packet + * \param bRequest the request field for the setup packet + * \param wValue the value field for the setup packet + * \param wIndex the index field for the setup packet + * \param data a suitably-sized data buffer for either input or output + * (depending on direction bits within bmRequestType) + * \param wLength the length field for the setup packet. The data buffer should + * be at least this size. + * \param timeout timeout (in millseconds) that this function should wait + * before giving up due to no response being received. For an unlimited + * timeout, use value 0. + * \returns on success, the number of bytes actually transferred + * \returns LIBUSB_ERROR_TIMEOUT if the transfer timed out + * \returns LIBUSB_ERROR_PIPE if the control request was not supported by the + * device + * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected + * \returns another LIBUSB_ERROR code on other failures + */ +int API_EXPORTED libusb_control_transfer(libusb_device_handle *dev_handle, + uint8_t bmRequestType, uint8_t bRequest, uint16_t wValue, uint16_t wIndex, + unsigned char *data, uint16_t wLength, unsigned int timeout) +{ + struct libusb_transfer *transfer = libusb_alloc_transfer(0); + unsigned char *buffer; + int completed = 0; + int r; + + if (!transfer) + return LIBUSB_ERROR_NO_MEM; + + buffer = malloc(LIBUSB_CONTROL_SETUP_SIZE + wLength); + if (!buffer) { + libusb_free_transfer(transfer); + return LIBUSB_ERROR_NO_MEM; + } + + libusb_fill_control_setup(buffer, bmRequestType, bRequest, wValue, wIndex, + wLength); + if ((bmRequestType & LIBUSB_ENDPOINT_DIR_MASK) == LIBUSB_ENDPOINT_OUT) + memcpy(buffer + LIBUSB_CONTROL_SETUP_SIZE, data, wLength); + + libusb_fill_control_transfer(transfer, dev_handle, buffer, + ctrl_transfer_cb, &completed, timeout); + transfer->flags = LIBUSB_TRANSFER_FREE_BUFFER; + r = libusb_submit_transfer(transfer); + if (r < 0) { + libusb_free_transfer(transfer); + return r; + } + + while (!completed) { + r = libusb_handle_events_check(HANDLE_CTX(dev_handle), &completed); + if (r < 0) { + if (r == LIBUSB_ERROR_INTERRUPTED) + continue; + libusb_cancel_transfer(transfer); + while (!completed) + if (libusb_handle_events_check(HANDLE_CTX(dev_handle), &completed) < 0) + break; + libusb_free_transfer(transfer); + return r; + } + } + + if ((bmRequestType & LIBUSB_ENDPOINT_DIR_MASK) == LIBUSB_ENDPOINT_IN) + memcpy(data, libusb_control_transfer_get_data(transfer), + transfer->actual_length); + + switch (transfer->status) { + case LIBUSB_TRANSFER_COMPLETED: + r = transfer->actual_length; + break; + case LIBUSB_TRANSFER_TIMED_OUT: + r = LIBUSB_ERROR_TIMEOUT; + break; + case LIBUSB_TRANSFER_STALL: + r = LIBUSB_ERROR_PIPE; + break; + case LIBUSB_TRANSFER_NO_DEVICE: + r = LIBUSB_ERROR_NO_DEVICE; + break; + default: + usbi_warn(HANDLE_CTX(dev_handle), + "unrecognised status code %d", transfer->status); + r = LIBUSB_ERROR_OTHER; + } + + libusb_free_transfer(transfer); + return r; +} + +static void LIBUSB_CALL bulk_transfer_cb(struct libusb_transfer *transfer) +{ + int *completed = transfer->user_data; + *completed = 1; + usbi_dbg("actual_length=%d", transfer->actual_length); + /* caller interprets results and frees transfer */ +} + +static int do_sync_bulk_transfer(struct libusb_device_handle *dev_handle, + unsigned char endpoint, unsigned char *buffer, int length, + int *transferred, unsigned int timeout, unsigned char type) +{ + struct libusb_transfer *transfer = libusb_alloc_transfer(0); + int completed = 0; + int r; + + if (!transfer) + return LIBUSB_ERROR_NO_MEM; + + libusb_fill_bulk_transfer(transfer, dev_handle, endpoint, buffer, length, + bulk_transfer_cb, &completed, timeout); + transfer->type = type; + + r = libusb_submit_transfer(transfer); + if (r < 0) { + libusb_free_transfer(transfer); + return r; + } + + while (!completed) { + r = libusb_handle_events_check(HANDLE_CTX(dev_handle), &completed); + if (r < 0) { + if (r == LIBUSB_ERROR_INTERRUPTED) + continue; + libusb_cancel_transfer(transfer); + while (!completed) + if (libusb_handle_events_check(HANDLE_CTX(dev_handle), &completed) < 0) + break; + libusb_free_transfer(transfer); + return r; + } + } + + *transferred = transfer->actual_length; + switch (transfer->status) { + case LIBUSB_TRANSFER_COMPLETED: + r = 0; + break; + case LIBUSB_TRANSFER_TIMED_OUT: + r = LIBUSB_ERROR_TIMEOUT; + break; + case LIBUSB_TRANSFER_STALL: + r = LIBUSB_ERROR_PIPE; + break; + case LIBUSB_TRANSFER_OVERFLOW: + r = LIBUSB_ERROR_OVERFLOW; + break; + case LIBUSB_TRANSFER_NO_DEVICE: + r = LIBUSB_ERROR_NO_DEVICE; + break; + default: + usbi_warn(HANDLE_CTX(dev_handle), + "unrecognised status code %d", transfer->status); + r = LIBUSB_ERROR_OTHER; + } + + libusb_free_transfer(transfer); + return r; +} + +/** \ingroup syncio + * Perform a USB bulk transfer. The direction of the transfer is inferred from + * the direction bits of the endpoint address. + * + * For bulk reads, the <tt>length</tt> field indicates the maximum length of + * data you are expecting to receive. If less data arrives than expected, + * this function will return that data, so be sure to check the + * <tt>transferred</tt> output parameter. + * + * You should also check the <tt>transferred</tt> parameter for bulk writes. + * Not all of the data may have been written. + * + * Also check <tt>transferred</tt> when dealing with a timeout error code. + * libusb may have to split your transfer into a number of chunks to satisfy + * underlying O/S requirements, meaning that the timeout may expire after + * the first few chunks have completed. libusb is careful not to lose any data + * that may have been transferred; do not assume that timeout conditions + * indicate a complete lack of I/O. + * + * \param dev_handle a handle for the device to communicate with + * \param endpoint the address of a valid endpoint to communicate with + * \param data a suitably-sized data buffer for either input or output + * (depending on endpoint) + * \param length for bulk writes, the number of bytes from data to be sent. for + * bulk reads, the maximum number of bytes to receive into the data buffer. + * \param transferred output location for the number of bytes actually + * transferred. + * \param timeout timeout (in millseconds) that this function should wait + * before giving up due to no response being received. For an unlimited + * timeout, use value 0. + * + * \returns 0 on success (and populates <tt>transferred</tt>) + * \returns LIBUSB_ERROR_TIMEOUT if the transfer timed out (and populates + * <tt>transferred</tt>) + * \returns LIBUSB_ERROR_PIPE if the endpoint halted + * \returns LIBUSB_ERROR_OVERFLOW if the device offered more data, see + * \ref packetoverflow + * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected + * \returns another LIBUSB_ERROR code on other failures + */ +int API_EXPORTED libusb_bulk_transfer(struct libusb_device_handle *dev_handle, + unsigned char endpoint, unsigned char *data, int length, int *transferred, + unsigned int timeout) +{ + return do_sync_bulk_transfer(dev_handle, endpoint, data, length, + transferred, timeout, LIBUSB_TRANSFER_TYPE_BULK); +} + +/** \ingroup syncio + * Perform a USB interrupt transfer. The direction of the transfer is inferred + * from the direction bits of the endpoint address. + * + * For interrupt reads, the <tt>length</tt> field indicates the maximum length + * of data you are expecting to receive. If less data arrives than expected, + * this function will return that data, so be sure to check the + * <tt>transferred</tt> output parameter. + * + * You should also check the <tt>transferred</tt> parameter for interrupt + * writes. Not all of the data may have been written. + * + * Also check <tt>transferred</tt> when dealing with a timeout error code. + * libusb may have to split your transfer into a number of chunks to satisfy + * underlying O/S requirements, meaning that the timeout may expire after + * the first few chunks have completed. libusb is careful not to lose any data + * that may have been transferred; do not assume that timeout conditions + * indicate a complete lack of I/O. + * + * The default endpoint bInterval value is used as the polling interval. + * + * \param dev_handle a handle for the device to communicate with + * \param endpoint the address of a valid endpoint to communicate with + * \param data a suitably-sized data buffer for either input or output + * (depending on endpoint) + * \param length for bulk writes, the number of bytes from data to be sent. for + * bulk reads, the maximum number of bytes to receive into the data buffer. + * \param transferred output location for the number of bytes actually + * transferred. + * \param timeout timeout (in millseconds) that this function should wait + * before giving up due to no response being received. For an unlimited + * timeout, use value 0. + * + * \returns 0 on success (and populates <tt>transferred</tt>) + * \returns LIBUSB_ERROR_TIMEOUT if the transfer timed out + * \returns LIBUSB_ERROR_PIPE if the endpoint halted + * \returns LIBUSB_ERROR_OVERFLOW if the device offered more data, see + * \ref packetoverflow + * \returns LIBUSB_ERROR_NO_DEVICE if the device has been disconnected + * \returns another LIBUSB_ERROR code on other error + */ +int API_EXPORTED libusb_interrupt_transfer( + struct libusb_device_handle *dev_handle, unsigned char endpoint, + unsigned char *data, int length, int *transferred, unsigned int timeout) +{ + return do_sync_bulk_transfer(dev_handle, endpoint, data, length, + transferred, timeout, LIBUSB_TRANSFER_TYPE_INTERRUPT); +} |