diff options
Diffstat (limited to 'samsung-ipc/device/xmm6260/modem_prj.h')
| -rw-r--r-- | samsung-ipc/device/xmm6260/modem_prj.h | 127 |
1 files changed, 127 insertions, 0 deletions
diff --git a/samsung-ipc/device/xmm6260/modem_prj.h b/samsung-ipc/device/xmm6260/modem_prj.h new file mode 100644 index 0000000..df4c37d --- /dev/null +++ b/samsung-ipc/device/xmm6260/modem_prj.h @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2010 Samsung Electronics. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MODEM_PRJ_H__ +#define __MODEM_PRJ_H__ + +#include <stdint.h> + +#define MAX_LINK_DEVTYPE 3 +#define MAX_RAW_DEVS 32 +#define MAX_NUM_IO_DEV (MAX_RAW_DEVS + 4) + +#define IOCTL_MODEM_ON _IO('o', 0x19) +#define IOCTL_MODEM_OFF _IO('o', 0x20) +#define IOCTL_MODEM_RESET _IO('o', 0x21) +#define IOCTL_MODEM_BOOT_ON _IO('o', 0x22) +#define IOCTL_MODEM_BOOT_OFF _IO('o', 0x23) +#define IOCTL_MODEM_START _IO('o', 0x24) + +#define IOCTL_MODEM_PROTOCOL_SUSPEND _IO('o', 0x25) +#define IOCTL_MODEM_PROTOCOL_RESUME _IO('o', 0x26) + +#define IOCTL_MODEM_STATUS _IO('o', 0x27) +#define IOCTL_MODEM_GOTA_START _IO('o', 0x28) +#define IOCTL_MODEM_FW_UPDATE _IO('o', 0x29) + +#define IOCTL_MODEM_NET_SUSPEND _IO('o', 0x30) +#define IOCTL_MODEM_NET_RESUME _IO('o', 0x31) + +#define IOCTL_MODEM_DUMP_START _IO('o', 0x32) +#define IOCTL_MODEM_DUMP_UPDATE _IO('o', 0x33) +#define IOCTL_MODEM_FORCE_CRASH_EXIT _IO('o', 0x34) +#define IOCTL_MODEM_CP_UPLOAD _IO('o', 0x35) +#define IOCTL_MODEM_DUMP_RESET _IO('o', 0x36) + +#define IOCTL_DPRAM_SEND_BOOT _IO('o', 0x40) +#define IOCTL_DPRAM_INIT_STATUS _IO('o', 0x43) + +/* ioctl command definitions. */ +#define IOCTL_DPRAM_PHONE_POWON _IO('o', 0xd0) +#define IOCTL_DPRAM_PHONEIMG_LOAD _IO('o', 0xd1) +#define IOCTL_DPRAM_NVDATA_LOAD _IO('o', 0xd2) +#define IOCTL_DPRAM_PHONE_BOOTSTART _IO('o', 0xd3) + +#define IOCTL_DPRAM_PHONE_UPLOAD_STEP1 _IO('o', 0xde) +#define IOCTL_DPRAM_PHONE_UPLOAD_STEP2 _IO('o', 0xdf) + +/* modem status */ +#define MODEM_OFF 0 +#define MODEM_CRASHED 1 +#define MODEM_RAMDUMP 2 +#define MODEM_POWER_ON 3 +#define MODEM_BOOTING_NORMAL 4 +#define MODEM_BOOTING_RAMDUMP 5 +#define MODEM_DUMPING 6 +#define MODEM_RUNNING 7 + +#define HDLC_HEADER_MAX_SIZE 6 /* fmt 3, raw 6, rfs 6 */ + +#define PSD_DATA_CHID_BEGIN 0x2A +#define PSD_DATA_CHID_END 0x38 + +#define IP6VERSION 6 + +#define SOURCE_MAC_ADDR {0x12, 0x34, 0x56, 0x78, 0x9A, 0xBC} + +/* Does modem ctl structure will use state ? or status defined below ?*/ +enum modem_state { + STATE_OFFLINE, + STATE_CRASH_RESET, /* silent reset */ + STATE_CRASH_EXIT, /* cp ramdump */ + STATE_BOOTING, + STATE_ONLINE, + STATE_NV_REBUILDING, /* <= rebuilding start */ + STATE_LOADER_DONE, +}; + +enum com_state { + COM_NONE, + COM_ONLINE, + COM_HANDSHAKE, + COM_BOOT, + COM_CRASH, +}; + +struct header_data { + char hdr[HDLC_HEADER_MAX_SIZE]; + unsigned len; + unsigned frag_len; + char start; /*hdlc start header 0x7F*/ +}; + +struct sipc4_hdlc_fmt_hdr { + uint16_t len; + uint8_t control; +} __attribute__((packed)); + +struct sipc4_fmt_hdr { + uint16_t len; + uint8_t msg_seq; + uint8_t ack_seq; + uint8_t main_cmd; + uint8_t sub_cmd; + uint8_t cmd_type; +} __attribute__((packed)); + +//Link control + +#define IOCTL_LINK_CONTROL_ENABLE _IO('o', 0x30) +#define IOCTL_LINK_CONTROL_ACTIVE _IO('o', 0x31) +#define IOCTL_LINK_GET_HOSTWAKE _IO('o', 0x32) +#define IOCTL_LINK_CONNECTED _IO('o', 0x33) +#define IOCTL_LINK_SET_BIAS_CLEAR _IO('o', 0x34) + +#endif //__MODEM_PRJ_H__ |