Teach the integer-promotion rewrite strategy to be endianness aware.

Sorry for this being broken so long. =/

As part of this, switch all of the existing tests to be Little Endian,
which is the behavior I was asserting in them anyways! Add in a new
big-endian test that checks the interesting behavior there.

Another part of this is to tighten the rules abotu when we perform the
full-integer promotion. This logic now rejects cases where there fully
promoted integer is a non-multiple-of-8 bitwidth or cases where the
loads or stores touch bits which are in the allocated space of the
alloca but are not loaded or stored when accessing the integer. Sadly,
these aren't really observable today as the rest of the pass will
already ensure the invariants hold. However, the latter situation is
likely to become a potential concern in the future.

Thanks to Benjamin and Duncan for early review of this patch. I'm still
looking into whether there are further endianness issues, please let me
know if anyone sees BE failures persisting past this.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165219 91177308-0d34-0410-b5e6-96231b3b80d8

6 files changed, 113 insertions, 5 deletions

diff --git a/test/Transforms/SROA/alignment.ll b/test/Transforms/SROA/alignment.ll
index 9fe3bcb..945ad91 100644
--- a/test/Transforms/SROA/alignment.ll
+++ b/test/Transforms/SROA/alignment.ll
@@ -1,5 +1,5 @@
 ; RUN: opt < %s -sroa -S | FileCheck %s
-target datalayout = "E-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
+target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
 
 declare void @llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
 
diff --git a/test/Transforms/SROA/basictest.ll b/test/Transforms/SROA/basictest.ll
index 54a25df..b6d08ba 100644
--- a/test/Transforms/SROA/basictest.ll
+++ b/test/Transforms/SROA/basictest.ll
@@ -1,7 +1,7 @@
 ; RUN: opt < %s -sroa -S | FileCheck %s
 ; RUN: opt < %s -sroa -force-ssa-updater -S | FileCheck %s
 
-target datalayout = "E-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
+target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
 
 declare void @llvm.lifetime.start(i64, i8* nocapture)
 declare void @llvm.lifetime.end(i64, i8* nocapture)
diff --git a/test/Transforms/SROA/big-endian.ll b/test/Transforms/SROA/big-endian.ll
new file mode 100644
index 0000000..532f869
--- /dev/null
+++ b/test/Transforms/SROA/big-endian.ll
@@ -0,0 +1,108 @@
+; RUN: opt < %s -sroa -S | FileCheck %s
+; RUN: opt < %s -sroa -force-ssa-updater -S | FileCheck %s
+
+target datalayout = "E-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
+
+define i8 @test1() {
+; We fully promote these to the i24 load or store size, resulting in just masks
+; and other operations that instcombine will fold, but no alloca. Note this is
+; the same as test12 in basictest.ll, but here we assert big-endian byte
+; ordering.
+;
+; CHECK: @test1
+
+entry:
+  %a = alloca [3 x i8]
+  %b = alloca [3 x i8]
+; CHECK-NOT: alloca
+
+  %a0ptr = getelementptr [3 x i8]* %a, i64 0, i32 0
+  store i8 0, i8* %a0ptr
+  %a1ptr = getelementptr [3 x i8]* %a, i64 0, i32 1
+  store i8 0, i8* %a1ptr
+  %a2ptr = getelementptr [3 x i8]* %a, i64 0, i32 2
+  store i8 0, i8* %a2ptr
+  %aiptr = bitcast [3 x i8]* %a to i24*
+  %ai = load i24* %aiptr
+; CHCEK-NOT: store
+; CHCEK-NOT: load
+; CHECK:      %[[mask0:.*]] = and i24 undef, 65535
+; CHECK-NEXT: %[[mask1:.*]] = and i24 %[[mask0]], -65281
+; CHECK-NEXT: %[[mask2:.*]] = and i24 %[[mask1]], -256
+
+  %biptr = bitcast [3 x i8]* %b to i24*
+  store i24 %ai, i24* %biptr
+  %b0ptr = getelementptr [3 x i8]* %b, i64 0, i32 0
+  %b0 = load i8* %b0ptr
+  %b1ptr = getelementptr [3 x i8]* %b, i64 0, i32 1
+  %b1 = load i8* %b1ptr
+  %b2ptr = getelementptr [3 x i8]* %b, i64 0, i32 2
+  %b2 = load i8* %b2ptr
+; CHCEK-NOT: store
+; CHCEK-NOT: load
+; CHECK:      %[[shift0:.*]] = lshr i24 %[[mask2]], 16
+; CHECK-NEXT: %[[trunc0:.*]] = trunc i24 %[[shift0]] to i8
+; CHECK-NEXT: %[[shift1:.*]] = lshr i24 %[[mask2]], 8
+; CHECK-NEXT: %[[trunc1:.*]] = trunc i24 %[[shift1]] to i8
+; CHECK-NEXT: %[[trunc2:.*]] = trunc i24 %[[mask2]] to i8
+
+  %bsum0 = add i8 %b0, %b1
+  %bsum1 = add i8 %bsum0, %b2
+  ret i8 %bsum1
+; CHECK:      %[[sum0:.*]] = add i8 %[[trunc0]], %[[trunc1]]
+; CHECK-NEXT: %[[sum1:.*]] = add i8 %[[sum0]], %[[trunc2]]
+; CHECK-NEXT: ret i8 %[[sum1]]
+}
+
+define i64 @test2() {
+; Test for various mixed sizes of integer loads and stores all getting
+; promoted.
+;
+; CHECK: @test2
+
+entry:
+  %a = alloca [7 x i8]
+; CHECK-NOT: alloca
+
+  %a0ptr = getelementptr [7 x i8]* %a, i64 0, i32 0
+  %a1ptr = getelementptr [7 x i8]* %a, i64 0, i32 1
+  %a2ptr = getelementptr [7 x i8]* %a, i64 0, i32 2
+  %a3ptr = getelementptr [7 x i8]* %a, i64 0, i32 3
+
+; CHCEK-NOT: store
+; CHCEK-NOT: load
+
+  %a0i16ptr = bitcast i8* %a0ptr to i16*
+  store i16 1, i16* %a0i16ptr
+; CHECK:      %[[mask:.*]] = and i56 undef, 1099511627775
+; CHECK-NEXT: %[[or:.*]] = or i56 %[[mask]], 1099511627776
+
+  %a1i4ptr = bitcast i8* %a1ptr to i4*
+  store i4 1, i4* %a1i4ptr
+; CHECK:      %[[mask:.*]] = and i56 %[[or]], -16492674416641
+; CHECK-NEXT: %[[or:.*]] = or i56 %[[mask]], 1099511627776
+
+  store i8 1, i8* %a2ptr
+; CHECK-NEXT: %[[mask:.*]] = and i56 %[[or]], -1095216660481
+; CHECK-NEXT: %[[or:.*]] = or i56 %[[mask]], 4294967296
+
+  %a3i24ptr = bitcast i8* %a3ptr to i24*
+  store i24 1, i24* %a3i24ptr
+; CHECK-NEXT: %[[mask:.*]] = and i56 %[[or]], -4294967041
+; CHECK-NEXT: %[[or:.*]] = or i56 %[[mask]], 256
+
+  %a2i40ptr = bitcast i8* %a2ptr to i40*
+  store i40 1, i40* %a2i40ptr
+; CHECK-NEXT: %[[mask:.*]] = and i56 %[[or]], -1099511627776
+; CHECK-NEXT: %[[or:.*]] = or i56 %[[mask]], 1
+
+; CHCEK-NOT: store
+; CHCEK-NOT: load
+
+  %aiptr = bitcast [7 x i8]* %a to i56*
+  %ai = load i56* %aiptr
+  %ret = zext i56 %ai to i64
+  ret i64 %ret
+; CHECK:      %[[ret:.*]] = zext i56 %[[or]] to i64
+; CHECK-NEXT: ret i64 %[[ret]]
+}
diff --git a/test/Transforms/SROA/fca.ll b/test/Transforms/SROA/fca.ll
index 6ddaed2..c30a5cc 100644
--- a/test/Transforms/SROA/fca.ll
+++ b/test/Transforms/SROA/fca.ll
@@ -1,6 +1,6 @@
 ; RUN: opt < %s -sroa -S | FileCheck %s
 ; RUN: opt < %s -sroa -force-ssa-updater -S | FileCheck %s
-target datalayout = "E-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
+target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
 
 define { i32, i32 } @test0(i32 %x, i32 %y) {
 ; CHECK: @test0
diff --git a/test/Transforms/SROA/phi-and-select.ll b/test/Transforms/SROA/phi-and-select.ll
index 6f5833a..2b0724c 100644
--- a/test/Transforms/SROA/phi-and-select.ll
+++ b/test/Transforms/SROA/phi-and-select.ll
@@ -1,5 +1,5 @@
 ; RUN: opt < %s -sroa -S | FileCheck %s
-target datalayout = "E-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
+target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
 
 define i32 @test1() {
 ; CHECK: @test1
diff --git a/test/Transforms/SROA/vector-promotion.ll b/test/Transforms/SROA/vector-promotion.ll
index 9cbab38..8075747 100644
--- a/test/Transforms/SROA/vector-promotion.ll
+++ b/test/Transforms/SROA/vector-promotion.ll
@@ -1,5 +1,5 @@
 ; RUN: opt < %s -sroa -S | FileCheck %s
-target datalayout = "E-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
+target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-n8:16:32:64"
 
 %S1 = type { i64, [42 x float] }