We're not doing automake any more

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17168 91177308-0d34-0410-b5e6-96231b3b80d8

1 files changed, 0 insertions, 684 deletions

diff --git a/tools/llvm-db/Makefile.in b/tools/llvm-db/Makefile.in
deleted file mode 100644
index b1d4013..0000000
--- a/tools/llvm-db/Makefile.in
+++ /dev/null
@@ -1,684 +0,0 @@
-# Makefile.in generated by automake 1.9.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#===-- tools/llvm-db/Makefile.am ---------------------------*- Makefile -*--===#
-#
-#                     The LLVM Compiler Infrastructure
-#
-# This file was developed by Reid Spencer and is distributed under the 
-# University of Illinois Open Source License. See LICENSE.TXT for details.
-# 
-#===------------------------------------------------------------------------===#
-
-#,===-- Makefile.rules.am - Common make rules for LLVM ------*- Makefile -*--===#
-#
-#                     The LLVM Compiler Infrastructure
-#
-# This file was developed by Reid Spencer and is distributed under the 
-# University of Illinois Open Source License. See LICENSE.TXT for details.
-# 
-#===------------------------------------------------------------------------===#
-
-SOURCES = $(llvm_db_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(top_srcdir)/Makefile_config
-bin_PROGRAMS = llvm-db$(EXEEXT)
-subdir = tools/llvm-db
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/autoconf/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/include/llvm/Config/config.h \
-	$(top_builddir)/include/llvm/Support/DataTypes.h \
-	$(top_builddir)/include/llvm/ADT/hash_map \
-	$(top_builddir)/include/llvm/ADT/hash_set \
-	$(top_builddir)/include/llvm/Support/ThreadSupport.h \
-	$(top_builddir)/include/llvm/ADT/iterator
-CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-PROGRAMS = $(bin_PROGRAMS)
-am_llvm_db_OBJECTS = CLIDebugger.$(OBJEXT) Commands.$(OBJEXT) \
-	llvm-db.$(OBJEXT)
-llvm_db_OBJECTS = $(am_llvm_db_OBJECTS)
-llvm_db_DEPENDENCIES = $(call GETOBJS,Interpreter,$(THEOBJS)) $(call \
-	GETLIBS,$(THELIBS)) $(call GETOBJS,ScalarOpts) $(call \
-	GETLIBS,Analysis,TransformUtils,Target) $(call \
-	GETOBJS,Debugger,BCReader,Core) $(call \
-	GETLIBS,Support,Target,System)
-DEFAULT_INCLUDES = 
-depcomp = $(SHELL) $(top_srcdir)/autoconf/depcomp
-am__depfiles_maybe = depfiles
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) \
-	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CXXFLAGS) $(CXXFLAGS)
-CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) --mode=link --tag=CXX $(CXXLD) $(AM_CXXFLAGS) \
-	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(llvm_db_SOURCES)
-DIST_SOURCES = $(llvm_db_SOURCES)
-CTAGS = ctags
-DEJATOOL = $(PACKAGE)
-RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
-EXPECT = expect
-RUNTEST = runtest
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-INSTALL = @INSTALL@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-
-# Target hardware architecture
-ARCH = @ARCH@
-ARCH_PPC_FALSE = @ARCH_PPC_FALSE@
-ARCH_PPC_TRUE = @ARCH_PPC_TRUE@
-ARCH_SPARC_FALSE = @ARCH_SPARC_FALSE@
-ARCH_SPARC_TRUE = @ARCH_SPARC_TRUE@
-ARCH_UNKNOWN_FALSE = @ARCH_UNKNOWN_FALSE@
-ARCH_UNKNOWN_TRUE = @ARCH_UNKNOWN_TRUE@
-ARCH_X86_FALSE = @ARCH_X86_FALSE@
-ARCH_X86_TRUE = @ARCH_X86_TRUE@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BISON = @BISON@
-BUILDMODE := @BUILDMODE@
-
-# Path to the CC binary, which use used by testcases for native builds.
-CC := @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@ -DENABLE_X86_JIT
-
-# Path to the C++ compiler to use.  This is an optional setting, which defaults
-# to whatever your gmake defaults to.
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DOT = @DOT@
-ECHO = echo
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ENABLE_OPTIMIZED = @ENABLE_OPTIMIZED@
-ENABLE_PROFILED = @ENABLE_PROFILED@
-
-# Endian-ness of the target
-ENDIAN = @ENDIAN@
-ETAGS = @ETAGS@
-ETAGSFLAGS = @ETAGSFLAGS@
-
-# Executable file extension for this platform.
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-FLEX = @LEX@
-HAVE_BZIP2 = @HAVE_BZIP2@
-HAVE_ZLIB = @HAVE_ZLIB@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-JIT = @JIT@
-
-# Linker flags.
-LDFLAGS = @LDFLAGS@ @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LLVMCC1 = @LLVMCC1@
-LLVMCC1PLUS = @LLVMCC1PLUS@
-
-# Path to location for LLVM C/C++ front-end. You can modify this if you
-# want to override the value set by configure.
-LLVMGCCDIR := @LLVMGCCDIR@
-LLVM_BINDIR := @LLVM_BINDIR@
-LLVM_CONFIGTIME = @LLVM_CONFIGTIME@
-LLVM_DATADIR := @LLVM_DATADIR@
-LLVM_DOCSDIR := @LLVM_DOCSDIR@
-LLVM_ETCDIR := @LLVM_ETCDIR@
-LLVM_INCLUDEDIR := @LLVM_INCLUDEDIR@ 
-LLVM_INFODIR := @LLVM_INFODIR@
-LLVM_LIBDIR := @LLVM_LIBDIR@
-LLVM_MANDIR := @LLVM_MANDIR@
-
-# Autoconf configured values
-LLVM_PREFIX := @LLVM_PREFIX@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MMAP_FILE = @MMAP_FILE@
-OBJEXT = @OBJEXT@
-
-# Target operating system for which LLVM will be compiled.
-OS = @OS@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-
-# Path to the Python interpreter
-PYTHON := @PYTHON@
-QMTEST = @QMTEST@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-
-# Shared library extension for this platform.
-SHLIBEXT = @SHLIBEXT@
-STRIP = @STRIP@
-VERSION = @VERSION@
-
-# The pathnames of the Flex and Bison programs, respectively.
-YACC = @YACC@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-ifGNUmake = @ifGNUmake@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-subdirs = @subdirs@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_os = @target_os@
-target_vendor = @target_vendor@
-
-# Options for all automake makefiles
-ACLOCAL_AMFLAGS = -I autoconf -I autoconf/m4 --output=autoconf/aclocal.m4
-AUTOMAKE_OPTIONS = foreign dejagnu dist-zip nostdinc
-
-# Libraries needed by tools
-TOOLLINKOPTS = @LIBS@
-
-# Path to the library archiver program.
-AR_PATH = @AR@
-
-# Paths to miscellaneous programs.
-RPWD = pwd
-SED = sed
-RM = rm
-CP = cp
-LN = ln
-CMP = cmp
-MKDIR = @abs_top_srcdir@/autoconf/mkinstalldirs
-DATE = date
-MV = mv
-VERB := @
-IGNORE := true
-
-# Determine the target for which LLVM should generate code.
-LLVMGCCARCH := @target@/3.4-llvm
-
-# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
-LCC1 = @LLVMCC1@
-LCC1XX = @LLVMCC1PLUS@
-
-# Path to directory where object files should be stored during a build.
-# Set OBJ_ROOT to "." if you do not want to use a separate place for
-# object files.
-OBJ_ROOT := .
-llvm_db_SOURCES = CLIDebugger.cpp Commands.cpp llvm-db.cpp
-THEOBJS = JIT CodeGen ExecutionEngine X86 SelectionDAG
-THELIBS = 
-
-# You can enable the X86 JIT on a non-X86 host by setting the flag
-# ENABLE_X86_JIT on the make command line. If not, it will still be
-# enabled automagically on an X86 host.
-@ARCH_X86_TRUE@ENABLE_X86_JIT = 1
-
-# You can enable the Sparc JIT on a non-Sparc host by setting the flag
-# ENABLE_SPARC_JIT on the make command line. If not, it will still be
-# enabled automagically on an Sparc host.
-@ARCH_SPARC_TRUE@ENABLE_SPARC_JIT = 1
-llvm_db_LDADD = \
-  $(call GETOBJS,Interpreter,$(THEOBJS)) \
-  $(call GETLIBS,$(THELIBS)) \
-  $(call GETOBJS,ScalarOpts) \
-  $(call GETLIBS,Analysis,TransformUtils,Target) \
-  $(call GETOBJS,Debugger,BCReader,Core) \
-  $(call GETLIBS,Support,Target,System)
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .cpp .lo .o .obj
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/Makefile_config $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tools/llvm-db/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  tools/llvm-db/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	     || test -f $$p1 \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
-
-clean-binPROGRAMS:
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
-llvm-db$(EXEEXT): $(llvm_db_OBJECTS) $(llvm_db_DEPENDENCIES) 
-	@rm -f llvm-db$(EXEEXT)
-	$(CXXLINK) $(llvm_db_LDFLAGS) $(llvm_db_OBJECTS) $(llvm_db_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/CLIDebugger.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Commands.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/llvm-db.Po@am__quote@
-
-.cpp.o:
-@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
-
-.cpp.obj:
-@am__fastdepCXX_TRUE@	if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-.cpp.lo:
-@am__fastdepCXX_TRUE@	if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCXX_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-check-DEJAGNU: site.exp
-	srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
-	EXPECT=$(EXPECT); export EXPECT; \
-	runtest=$(RUNTEST); \
-	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
-	  l='$(DEJATOOL)'; for tool in $$l; do \
-	    $$runtest $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \
-	  done; \
-	else echo "WARNING: could not find \`runtest'" 1>&2; :;\
-	fi
-site.exp: Makefile
-	@echo 'Making a new site.exp file...'
-	@echo '## these variables are automatically generated by make ##' >site.tmp
-	@echo '# Do not edit here.  If you wish to override these values' >>site.tmp
-	@echo '# edit the last section' >>site.tmp
-	@echo 'set srcdir $(srcdir)' >>site.tmp
-	@echo "set objdir `pwd`" >>site.tmp
-	@echo 'set build_alias "$(build_alias)"' >>site.tmp
-	@echo 'set build_triplet $(build_triplet)' >>site.tmp
-	@echo 'set host_alias "$(host_alias)"' >>site.tmp
-	@echo 'set host_triplet $(host_triplet)' >>site.tmp
-	@echo 'set target_alias "$(target_alias)"' >>site.tmp
-	@echo 'set target_triplet $(target_triplet)' >>site.tmp
-	@echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp
-	@test ! -f site.exp || \
-	  sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp
-	@-rm -f site.bak
-	@test ! -f site.exp || mv site.exp site.bak
-	@mv site.tmp site.exp
-
-distclean-DEJAGNU:
-	-rm -f site.exp site.bak
-	-l='$(DEJATOOL)'; for tool in $$l; do \
-	  rm -f $$tool.sum $$tool.log; \
-	done
-
-distdir: $(DISTFILES)
-	$(mkdir_p) $(distdir)/../..
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-DEJAGNU distclean-compile \
-	distclean-generic distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-DEJAGNU check-am clean \
-	clean-binPROGRAMS clean-generic clean-libtool ctags distclean \
-	distclean-DEJAGNU distclean-compile distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-exec install-exec-am \
-	install-info install-info-am install-man install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-binPROGRAMS \
-	uninstall-info-am
-
-
-# These are options that can either be enabled here, or can be enabled on the
-# make command line (ie, make ENABLE_PROFILING=1):
-
-# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
-# turned on, and Debug builds are turned off.
-#ENABLE_OPTIMIZED = 1
-
-# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
-# information to allow gprof to be used to get execution frequencies.
-#ENABLE_PROFILING = 1
-
-# This option tells the Makefiles to produce verbose output.
-# It essentially prints the commands that make is executing
-#VERBOSE = 1
-
-# Include the rules.
-# WARNING NOTE WARNING NOTE WARNING NOTE WARNING NOTE
-# The inclusion of Makefile_rules MUST be done such that there is a space
-# before "include". This prevents automake from processing the file and
-# simply passes the inclusion on to GNU Make. The rules in Makefile_rules
-# depend on this. DO NOT REMOVE THE SPACE BEFORE "include"
- include $(top_srcdir)/Makefile_rules
-
-# What the X86 JIT requires
- ifdef ENABLE_X86_JIT
- endif
-
-# What the Sparc JIT requires
- ifdef ENABLE_SPARC_JIT
-#  CPPFLAGS += -DENABLE_SPARC_JIT
-#  THEOBJS  += SparcV9 SparcV9InstrSched SparcV9LiveVar SparcV9RegAlloc
-#  THEOBJS  += ProfilePaths BCWriter
-#  THELIBS  += Instrument Transforms IPO IPA DataStructure
- endif
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: