Move Apple style build makefiles to the top level. Just like llvmgcc42.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64023 91177308-0d34-0410-b5e6-96231b3b80d8

2 files changed, 0 insertions, 377 deletions

diff --git a/utils/buildit/GNUmakefile b/utils/buildit/GNUmakefile
deleted file mode 100644
index 6e51312..0000000
--- a/utils/buildit/GNUmakefile
+++ /dev/null
@@ -1,115 +0,0 @@
-# LLVM LOCAL file build machinery
-# LLVM Compiler Makefile for use by buildit.  
-#
-# This makefile is intended only for use with B&I buildit. For "normal" builds
-# use the conventional top-level makefile.
-#
-# You can specify TARGETS=ppc (or i386) on the buildit command line to limit the
-# build to just one target. The default is for ppc and i386. The compiler
-# targetted at this host gets built anyway, but not installed unless it's listed
-# in TARGETS.
-
-# Include the set of standard Apple makefile definitions.
-ifndef CoreOSMakefiles
-CoreOSMakefiles = $(MAKEFILEPATH)/CoreOS
-endif
-include $(CoreOSMakefiles)/Standard/Standard.make
-
-# Enable Apple extensions to (gnu)make.
-USE_APPLE_PB_SUPPORT = all
-
-RC_ARCHS := ppc i386
-HOSTS = $(RC_ARCHS)
-targets = echo $(RC_ARCHS)
-TARGETS := $(shell $(targets))
-
-SRCROOT = .
-
-SRC = $(shell cd $(SRCROOT) && pwd | sed s,/private,,)
-OBJROOT = $(SRC)/obj
-SYMROOT = $(OBJROOT)/../sym
-DSTROOT = $(OBJROOT)/../dst
-
-#######################################################################
-
-PREFIX = /usr/local
-
-# Unless assertions are forced on in the GMAKE command line, disable them.
-ifdef ENABLE_ASSERTIONS
-LLVM_ASSERTIONS := yes
-else
-LLVM_ASSERTIONS := no
-endif
-
-# Default is optimized build.
-ifeq ($(LLVM_DEBUG),1)
-LLVM_OPTIMIZED := no
-else
-LLVM_OPTIMIZED := yes
-endif
-
-ifndef RC_ProjectSourceVersion
-RC_ProjectSourceVersion = 9999
-endif
-
-ifndef RC_ProjectSourceSubversion
-RC_ProjectSourceSubversion = 0
-endif
-
-# NOTE : Always put version numbers at the end because they are optional.
-install: $(OBJROOT) $(SYMROOT) $(DSTROOT)
-	cd $(OBJROOT) && \
-	  $(SRC)/build_llvm "$(RC_ARCHS)" "$(TARGETS)" \
-	    $(SRC) $(PREFIX) $(DSTROOT) $(SYMROOT) \
-	    $(LLVM_ASSERTIONS) $(LLVM_OPTIMIZED) \
-	    $(RC_ProjectSourceVersion) $(RC_ProjectSourceSubversion) 
-
-
-# installhdrs does nothing, because the headers aren't useful until
-# the compiler is installed.
-installhdrs:
-
-# We build and install in one shell script.
-build: 
-
-installsrc:
-	@echo
-	@echo ++++++++++++++++++++++
-	@echo + Installing sources +
-	@echo ++++++++++++++++++++++
-	@echo
-	if [ $(SRCROOT) != . ]; then \
-	  $(PAX) -rw . $(SRCROOT); \
-	fi
-	find -d "$(SRCROOT)" \( -type d -a -name .svn -o \
-	                        -type f -a -name .DS_Store -o \
-				-name \*~ -o -name .\#\* \) \
-	  -exec rm -rf {} \;
-
-#######################################################################
-
-clean:
-	@echo
-	@echo ++++++++++++
-	@echo + Cleaning +
-	@echo ++++++++++++
-	@echo
-	@if [ -d $(OBJROOT) -a "$(OBJROOT)" != / ]; then \
-	  echo '*** DELETING ' $(OBJROOT); \
-	  rm -rf $(OBJROOT); \
-	fi
-	@if [ -d $(SYMROOT) -a "$(SYMROOT)" != / ]; then \
-	  echo '*** DELETING ' $(SYMROOT); \
-	  rm -rf $(SYMROOT); \
-	fi
-	@if [ -d $(DSTROOT) -a "$(DSTROOT)" != / ]; then \
-	  echo '*** DELETING ' $(DSTROOT); \
-	  rm -rf $(DSTROOT); \
-	fi
-
-#######################################################################
-
-$(OBJROOT) $(SYMROOT) $(DSTROOT):
-	mkdir -p $@
-
-.PHONY: install installsrc clean
diff --git a/utils/buildit/build_llvm b/utils/buildit/build_llvm
deleted file mode 100755
index bd245f1..0000000
--- a/utils/buildit/build_llvm
+++ /dev/null
@@ -1,262 +0,0 @@
-#!/bin/sh
-# LLVM LOCAL file B&I
-
-set -x
-
-# Build LLVM the "Apple way".
-# Parameters:
-
-# The first parameter is a space-separated list of the architectures the
-# compilers will run on. For instance, "ppc i386". If the current machine
-# isn't in the list, it will (effectively) be added.
-# FIXME: HOSTS is not used in this script. Use it or Remove it.
-HOSTS="$1"
-
-# The second parameter is a space-separated list of the architectures the
-# compilers will generate code for. If the current machine isn't in the list, a
-# compiler for it will get built anyway, but won't be installed.
-TARGETS="$2"
-
-# The third parameter is the path to the compiler sources. There should be a
-# shell script named 'configure' in this directory. This script makes a copy...
-ORIG_SRC_DIR="$3"
-
-# The fourth parameter is the location where the LLVM will be installed. You can
-# move it once it's built, so this mostly controls the layout of $DEST_DIR.
-DEST_ROOT="$4"
-
-# The fifth parameter is the place where the compiler will be copied once it's
-# built.
-DEST_DIR="$5"
-
-# The sixth parameter is a directory in which to place information (like
-# unstripped executables and generated source files) helpful in debugging the
-# resulting compiler.
-SYM_DIR="$6"
-
-# The seventh parameter is a yes/no that indicates whether assertions should be
-# enabled in the LLVM libs/tools.
-LLVM_ASSERTIONS="$7"
-
-# The eighth parameter is a yes/no that indicates whether this is an optimized
-# build.
-LLVM_OPTIMIZED="$8"
-
-# The nineth parameter is the version number of the submission, e.g. 1007.
-LLVM_SUBMIT_VERSION="$9"
-
-# The tenth parameter is the subversion number of the submission, e.g. 03.
-LLVM_SUBMIT_SUBVERSION="${10}"
-
-# The current working directory is where the build will happen. It may already
-# contain a partial result of an interrupted build, in which case this script
-# will continue where it left off.
-DIR=`pwd`
-
-DARWIN_VERS=`uname -r | sed 's/\..*//'`
-echo DARWIN_VERS = $DARWIN_VERS
-
-# If the user has CC set in their environment unset it now
-unset CC
-
-DT_HOME=$DEST_DIR/Developer/usr
-DEST_ROOT="/Developer$DEST_ROOT"
-if [ "x$DEVELOPER_BIN" != "x" ]; then
-    DT_HOME=$DEST_DIR/$DEVELOPER_DIR/usr
-    DEST_ROOT="/$DEVELOPER_DIR$DEST_ROOT"
-fi
-
-################################################################################
-# Run the build.
-
-# Create the source tree we'll actually use to build, deleting
-# tcl since it doesn't actually build properly in a cross environment
-# and we don't really need it.
-SRC_DIR=$DIR/src
-rm -rf $SRC_DIR || exit 1
-mkdir $SRC_DIR || exit 1
-ln -s $ORIG_SRC_DIR/* $SRC_DIR/ || exit 1
-
-# Build the LLVM tree universal.
-mkdir -p $DIR/obj-llvm || exit 1
-cd $DIR/obj-llvm || exit 1
-
-if [ \! -f Makefile.config ]; then
-    $SRC_DIR/configure --prefix=$DT_HOME/local \
-        --enable-targets=arm,x86,powerpc,cbe \
-        --enable-assertions=$LLVM_ASSERTIONS \
-        --enable-optimized=$LLVM_OPTIMIZED \
-        || exit 1
-fi
-
-SUBVERSION=`echo $RC_ProjectSourceVersion | sed -e 's/[^.]*\.\([0-9]*\).*/\1/'`
-
-if [ "x$SUBVERSION" != "x$RC_ProjectSourceVersion" ]; then
-    LLVM_SUBMIT_SUBVERSION=`printf "%02d" $SUBVERSION`
-    RC_ProjectSourceVersion=`echo $RC_ProjectSourceVersion | sed -e 's/\..*//'`
-    LLVM_SUBMIT_VERSION=$RC_ProjectSourceVersion
-fi
-
-if [ "x$LLVM_SUBMIT_SUBVERSION" = "x00" -o "x$LLVM_SUBMIT_SUBVERSION" = "x0" ]; then
-    LLVM_VERSION="$LLVM_SUBMIT_VERSION"
-else
-    LLVM_VERSION="$LLVM_SUBMIT_VERSION-$LLVM_SUBMIT_SUBVERSION"
-fi
-
-GCC_VER=`cc --version 2>/dev/null | sed 1q`
-
-if echo "$GCC_VER" | grep GCC > /dev/null; then
-    GCC_VER=`echo $GCC_VER | sed -e 's/.*(GCC) \([0-9.][0-9.]*\).*/\1/'`
-    MAJ_VER=`echo $GCC_VER | sed 's/\..*//'`
-    MIN_VER=`echo $GCC_VER | sed 's/[^.]*\.\([0-9]*\).*/\1/'`
-fi
-
-JOBS_FLAG=""
-
-# Note: If compiling with GCC 4.0, don't pass the -jN flag. Building universal
-# already has parallelism and we don't want to make the builders hit swap by
-# firing off too many gccs at the same time.
-if [ "x$MAJ_VER" != "x4" -o "x$MIN_VER" != "x0" ]; then
-    # Figure out how many make processes to run.
-    SYSCTL=`sysctl -n hw.activecpu`
-
-    # hw.activecpu only available in 10.2.6 and later
-    if [ -z "$SYSCTL" ]; then
-        SYSCTL=`sysctl -n hw.ncpu`
-    fi
-
-    # sysctl -n hw.* does not work when invoked via B&I chroot /BuildRoot.
-    # Builders can default to 2, since even if they are single processor,
-    # nothing else is running on the machine.
-    if [ -z "$SYSCTL" ]; then
-        SYSCTL=2
-    fi
-
-    JOBS_FLAG="-j $SYSCTL"
-fi
-
-make $JOBS_FLAG $OPTIMIZE_OPTS UNIVERSAL=1 UNIVERSAL_ARCH="$TARGETS" \
-    LLVM_SUBMIT_VERSION=$LLVM_SUBMIT_VERSION \
-    LLVM_SUBMIT_SUBVERSION=$LLVM_SUBMIT_SUBVERSION \
-    CXXFLAGS="-DLLVM_VERSION_INFO='\" Apple Build #$LLVM_VERSION\"'" \
-    VERBOSE=1
-
-if ! test $? == 0 ; then
-    echo "error: LLVM 'make' failed!"
-    exit 1
-fi 
-
-################################################################################
-# Construct the actual destination root, by copying stuff from $DIR/dst-* to
-# $DEST_DIR, with occasional 'lipo' commands.
-
-cd $DEST_DIR || exit 1
-
-# Clean out DEST_DIR in case -noclean was passed to buildit.
-rm -rf * || exit 1
-
-cd $DIR/obj-llvm || exit 1
-
-# Install the tree into the destination directory.
-make $LOCAL_MAKEFLAGS $OPTIMIZE_OPTS UNIVERSAL=1 UNIVERSAL_ARCH="$TARGETS" \
-    LLVM_SUBMIT_VERSION=$LLVM_SUBMIT_VERSION \
-    LLVM_SUBMIT_SUBVERSION=$LLVM_SUBMIT_SUBVERSION \
-    OPTIMIZE_OPTION='-O2' VERBOSE=1 install
-
-if ! test $? == 0 ; then
-    echo "error: LLVM 'make install' failed!"
-    exit 1
-fi 
-
-# Install Version.h
-RC_ProjectSourceSubversion=`printf "%d" $LLVM_SUBMIT_SUBVERSION`
-echo "#define LLVM_VERSION ${RC_ProjectSourceVersion}" > $DEST_DIR$DEST_ROOT/include/llvm/Version.h
-echo "#define LLVM_MINOR_VERSION ${RC_ProjectSourceSubversion}" >> $DEST_DIR$DEST_ROOT/include/llvm/Version.h
-
-if [ "x$LLVM_DEBUG" != "x1" ]; then
-    # Strip local symbols from llvm libraries.
-    strip -S $DEST_DIR$DEST_ROOT/lib/*.[oa]
-    strip -Sx $DEST_DIR$DEST_ROOT/lib/*.so
-fi
-
-# Copy over the tblgen utility.
-cp `find $DIR -name tblgen` $DT_HOME/local/bin
-
-# Remove .dir files 
-cd $DEST_DIR$DEST_ROOT
-rm bin/.dir etc/llvm/.dir lib/.dir
-
-# Remove PPC64 fat slices.
-cd $DEST_DIR$DEST_ROOT/bin
-if [ $MACOSX_DEPLOYMENT_TARGET = "10.4" ]; then
-    find . -perm 755 -type f -exec lipo -extract ppc -extract i386 {} -output {} \;
-elif [ $MACOSX_DEPLOYMENT_TARGET = "10.5" ]; then
-    find . -perm 755 -type f -exec lipo -extract ppc7400 -extract i386 {} -output {} \;
-else
-    find . -perm 755 -type f -exec lipo -extract ppc7400 -extract i386 -extract x86_64 {} -output {} \;
-fi
-
-cd $DEST_DIR$DEST_ROOT
-mkdir -p $DT_HOME/lib
-mv lib/libLTO.dylib $DT_HOME/lib/libLTO.dylib
-rm -f lib/libLTO.a lib/libLTO.la
-
-# Compress manpages
-MDIR=$DEST_DIR$DEST_ROOT/share/man/man1
-gzip -f $MDIR/*
-
-################################################################################
-# Create SYM_DIR with information required for debugging.
-
-# Figure out how many make processes to run.
-SYSCTL=`sysctl -n hw.activecpu`
-
-# hw.activecpu only available in 10.2.6 and later
-if [ -z "$SYSCTL" ]; then
-  SYSCTL=`sysctl -n hw.ncpu`
-fi
-
-# sysctl -n hw.* does not work when invoked via B&I chroot /BuildRoot. Builders
-# can default to 2, since even if they are single processor, nothing else is
-# running on the machine.
-if [ -z "$SYSCTL" ]; then
-  SYSCTL=2
-fi
-
-cd $SYM_DIR || exit 1
-
-# Clean out SYM_DIR in case -noclean was passed to buildit.
-rm -rf * || exit 1
-
-# Generate .dSYM files
-find $DEST_DIR -perm -0111 -type f ! \( -name '*.la' -o -name gccas -o -name gccld -o -name llvm-config \) -print \
-    | xargs -n 1 -P ${SYSCTL} dsymutil
-
-# Save .dSYM files and .a archives
-cd $DEST_DIR || exit 1
-find . \( -path \*.dSYM/\* -or -name \*.a \) -print \
-    | cpio -pdml $SYM_DIR || exit 1
-
-# Save source files.
-mkdir $SYM_DIR/src || exit 1
-cd $DIR || exit 1
-find obj-* -name \*.\[chy\] -o -name \*.cpp -print \
-    | cpio -pdml $SYM_DIR/src || exit 1
-
-################################################################################
-# Remove debugging information from DEST_DIR.
-
-find $DEST_DIR -name \*.a -print | xargs ranlib || exit 1
-find $DEST_DIR -name \*.dSYM -print | xargs rm -r || exit 1
-chgrp -h -R wheel $DEST_DIR
-chgrp -R wheel $DEST_DIR
-
-################################################################################
-# Remove tar ball from docs directory
-
-find $DEST_DIR -name html.tar.gz -exec rm {} \;
-
-################################################################################
-# w00t! Done!
-
-exit 0