aboutsummaryrefslogtreecommitdiffstats
path: root/test/lib/llvm.exp
diff options
context:
space:
mode:
Diffstat (limited to 'test/lib/llvm.exp')
-rw-r--r--test/lib/llvm.exp269
1 files changed, 0 insertions, 269 deletions
diff --git a/test/lib/llvm.exp b/test/lib/llvm.exp
index a61f934..e69de29 100644
--- a/test/lib/llvm.exp
+++ b/test/lib/llvm.exp
@@ -1,269 +0,0 @@
-# This procedure executes one line of a test case's execution script.
-proc execOneLine { test PRS outcome lineno line } {
- set status 0
- set resultmsg ""
- set retval [ catch { eval exec -keepnewline -- $line } errmsg ]
- if { $retval != 0 } {
- set code [lindex $::errorCode 0]
- set lineno [expr $lineno + 1]
- if { $PRS != ""} {
- set PRS " for $PRS"
- }
- set errmsg " at line $lineno\nwhile running: $line\n$errmsg"
- switch "$code" {
- CHILDSTATUS {
- set status [lindex $::errorCode 2]
- if { $status != 0 } {
- set resultmsg "$test$PRS\nFailed with exit($status)$errmsg"
- }
- }
- CHILDKILLED {
- set signal [lindex $::errorCode 2]
- set resultmsg "$test$PRS\nFailed with signal($signal)$errmsg"
- }
- CHILDSUSP {
- set signal [lindex $::errorCode 2]
- set resultmsg "$test$PRS\nFailed with suspend($signal)$errmsg"
- }
- POSIX {
- set posixNum [lindex $::errorCode 1]
- set posixMsg [lindex $::errorCode 2]
- set resultmsg "$test$PRS\nFailed with posix($posixNum,$posixMsg)$errmsg"
- }
- NONE {
- # Any other error such as stderr output of a program, or syntax error in
- # the RUN line.
- set resultmsg "$test$PRS\nFailed with unknown error (or has stderr output)$errmsg"
- }
- default {
- set resultmsg "$test$PRS\nFailed with unknown error$errmsg"
- }
- }
- }
- return $resultmsg
-}
-
-# This procedure performs variable substitutions on the RUN: lines of a test
-# cases.
-proc substitute { line test tmpFile } {
- global srcroot objroot srcdir objdir subdir target_triplet
- global ocamlopt
- global link shlibext
- global valgrind grep gas
- set path [file join $srcdir $subdir]
-
- # Substitute all Tcl variables.
- set new_line [subst $line ]
-
- #replace %% with _#MARKER#_ to make the replacement of %% more predictable
- regsub -all {%%} $new_line {_#MARKER#_} new_line
- #replace %link with C++ link command
- regsub -all {%link} $new_line "$link" new_line
- #replace %shlibext with shared library extension
- regsub -all {%shlibext} $new_line "$shlibext" new_line
- #replace %ocamlopt with ocaml compiler command
- regsub -all {%ocamlopt} $new_line "$ocamlopt" new_line
- #replace %p with path to source,
- regsub -all {%p} $new_line [file join $srcdir $subdir] new_line
- #replace %s with filename
- regsub -all {%s} $new_line $test new_line
- #replace %t with temp filenames
- regsub -all {%t} $new_line $tmpFile new_line
- #replace %abs_tmp with absolute temp filenames
- regsub -all {%abs_tmp} $new_line [file join [pwd] $tmpFile] new_line
- #replace _#MARKER#_ with %
- regsub -all {_#MARKER#_} $new_line % new_line
-
- #replace grep with GNU grep
- regsub -all { grep } $new_line " $grep " new_line
- #replace as with GNU as
- regsub -all {\| as } $new_line "| $gas " new_line
-
- #valgind related stuff
-# regsub -all {bugpoint } $new_line "$valgrind bugpoint " new_line
- regsub -all {llc } $new_line "$valgrind llc " new_line
- regsub -all {lli } $new_line "$valgrind lli " new_line
- regsub -all {llvm-ar } $new_line "$valgrind llvm-ar " new_line
- regsub -all {llvm-as } $new_line "$valgrind llvm-as " new_line
- regsub -all {llvm-bcanalyzer } $new_line "$valgrind llvm-bcanalyzer " new_line
- regsub -all {llvm-dis } $new_line "$valgrind llvm-dis " new_line
- regsub -all {llvm-extract } $new_line "$valgrind llvm-extract " new_line
- regsub -all {llvm-ld } $new_line "$valgrind llvm-ld " new_line
- regsub -all {llvm-link } $new_line "$valgrind llvm-link " new_line
- regsub -all {llvm-nm } $new_line "$valgrind llvm-nm " new_line
- regsub -all {llvm-prof } $new_line "$valgrind llvm-prof " new_line
- regsub -all {llvm-ranlib } $new_line "$valgrind llvm-ranlib " new_line
- regsub -all {([^a-zA-Z_-])opt } $new_line "\\1$valgrind opt " new_line
- regsub -all {^opt } $new_line "$valgrind opt " new_line
- regsub -all {llvm-tblgen } $new_line "$valgrind llvm-tblgen " new_line
- regsub -all "not $valgrind " $new_line "$valgrind not " new_line
-
- return $new_line
-}
-
-# This procedure runs the set of tests for the test_source_files array.
-proc RunLLVMTests { test_source_files } {
- global srcroot objroot srcdir objdir subdir target_triplet
- set timeout 60
-
- set path [file join $objdir $subdir]
-
- #Make Output Directory if it does not exist already
- if { [file exists path] } {
- cd $path
- } else {
- file mkdir $path
- cd $path
- }
-
- file mkdir Output
- cd Output
-
- foreach test $test_source_files {
- #Should figure out best way to set the timeout
- #set timeout 40
-
- set filename [file tail $test]
- verbose "ABOUT TO RUN: $filename" 2
- set outcome PASS
- set tmpFile "$filename.tmp"
-
- # Mark that it should not be XFAIL for this target.
- set targetPASS 0
-
- #set hasRunline bool to check if testcase has a runline
- set numLines 0
-
- # Open the test file and start reading lines
- set testFileId [ open $test r]
- set runline ""
- set PRNUMS ""
- foreach line [split [read $testFileId] \n] {
-
- # if its the END. line then stop parsing (optimization for big files)
- if {[regexp {END.[[:space:]]*$} $line match endofscript]} {
- break
-
- # if the line is continued, concatenate and continue the loop
- } elseif {[regexp {RUN: *(.+)(\\)$} $line match oneline suffix]} {
- set runline "$runline$oneline "
-
- # if its a terminating RUN: line then do substitution on the whole line
- # and then save the line.
- } elseif {[regexp {RUN: *(.+)$} $line match oneline suffix]} {
- set runline "$runline$oneline"
- set runline [ substitute $runline $test $tmpFile ]
- set lines($numLines) $runline
- set numLines [expr $numLines + 1]
- set runline ""
-
- # if its an PR line, save the problem report number
- } elseif {[regexp {PR([0-9]+)} $line match prnum]} {
- if {$PRNUMS == ""} {
- set PRNUMS "PR$prnum"
- } else {
- set PRNUMS "$PRNUMS,$prnum"
- }
- # if its an XFAIL line, see if we should be XFAILing or not.
- } elseif {[regexp {XFAIL:[ *](.+)} $line match targets]} {
- set targets
-
- #split up target if more then 1 specified
- foreach target [split $targets ,] {
- if { $target == "*" } {
- if {$targetPASS != 1} {
- set outcome XFAIL
- }
- } elseif { [regexp $target $target_triplet match] } {
- if {$targetPASS != 1} {
- set outcome XFAIL
- }
- }
- }
- } elseif {[regexp {XTARGET:[ *](.+)} $line match targets]} {
- set targets
-
- #split up target if more then 1 specified
- foreach target [split $targets ,] {
- if { [regexp {\*} $target match] } {
- set targetPASS 1
- set outcome PASS
- } elseif { [regexp $target $target_triplet match] } {
- set targetPASS 1
- set outcome PASS
- }
- }
- }
- }
-
- # Done reading the script
- close $testFileId
-
-
- if { $numLines == 0 } {
- fail "$test: \nDoes not have a RUN line\n"
- } else {
- set failed 0
- for { set i 0 } { $i < $numLines } { set i [ expr $i + 1 ] } {
- regsub ^.*RUN:(.*) $lines($i) \1 theLine
- set resultmsg [execOneLine $test $PRNUMS $outcome $i $theLine ]
- if { $resultmsg != "" } {
- if { $outcome == "XFAIL" } {
- xfail "$resultmsg"
- } else {
- fail "$resultmsg"
- }
- set failed 1
- break
- }
- }
- if { $failed } {
- continue
- } else {
- if { $PRNUMS != "" } {
- set PRNUMS " for $PRNUMS"
- }
- if { $outcome == "XFAIL" } {
- xpass "$test$PRNUMS"
- } else {
- pass "$test$PRNUMS"
- }
- }
- }
- }
-}
-
-# This procedure provides an interface to check the TARGETS_TO_BUILD makefile
-# variable to see if a particular target has been configured to build. This
-# helps avoid running tests for targets that aren't available.
-proc llvm_supports_target { tgtName } {
- global TARGETS_TO_BUILD
- foreach target [split $TARGETS_TO_BUILD] {
- if { [regexp $tgtName $target match] } {
- return 1
- }
- }
- return 0
-}
-
-proc llvm_supports_darwin_and_target { tgtName } {
- global target_triplet
- if { [ llvm_supports_target $tgtName ] } {
- if { [regexp darwin $target_triplet match] } {
- return 1
- }
- }
- return 0
-}
-
-# This procedure provides an interface to check the BINDINGS_TO_BUILD makefile
-# variable to see if a particular binding has been configured to build.
-proc llvm_supports_binding { name } {
- global llvm_bindings
- foreach item [split $llvm_bindings] {
- if { [regexp $name $item match] } {
- return 1
- }
- }
- return 0
-}
generated by cgit v1.1 at 2025-08-18 01:24:21 +0000