auto import from //depot/cupcake/@135843

1 files changed, 569 insertions, 0 deletions

diff --git a/fpu/softfloat-specialize.h b/fpu/softfloat-specialize.h
new file mode 100644
index 0000000..93fe06e
--- /dev/null
+++ b/fpu/softfloat-specialize.h
@@ -0,0 +1,569 @@
+
+/*============================================================================
+
+This C source fragment is part of the SoftFloat IEC/IEEE Floating-point
+Arithmetic Package, Release 2b.
+
+Written by John R. Hauser.  This work was made possible in part by the
+International Computer Science Institute, located at Suite 600, 1947 Center
+Street, Berkeley, California 94704.  Funding was partially provided by the
+National Science Foundation under grant MIP-9311980.  The original version
+of this code was written as part of a project to build a fixed-point vector
+processor in collaboration with the University of California at Berkeley,
+overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
+is available through the Web page `http://www.cs.berkeley.edu/~jhauser/
+arithmetic/SoftFloat.html'.
+
+THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort has
+been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES
+RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS
+AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES,
+COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE
+EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE
+INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR
+OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE.
+
+Derivative works are acceptable, even for commercial purposes, so long as
+(1) the source code for the derivative work includes prominent notice that
+the work is derivative, and (2) the source code includes prominent notice with
+these four paragraphs for those parts of this code that are retained.
+
+=============================================================================*/
+
+#if defined(TARGET_MIPS) || defined(TARGET_HPPA)
+#define SNAN_BIT_IS_ONE		1
+#else
+#define SNAN_BIT_IS_ONE		0
+#endif
+
+/*----------------------------------------------------------------------------
+| Underflow tininess-detection mode, statically initialized to default value.
+| (The declaration in `softfloat.h' must match the `int8' type here.)
+*----------------------------------------------------------------------------*/
+int8 float_detect_tininess = float_tininess_after_rounding;
+
+/*----------------------------------------------------------------------------
+| Raises the exceptions specified by `flags'.  Floating-point traps can be
+| defined here if desired.  It is currently not possible for such a trap
+| to substitute a result value.  If traps are not implemented, this routine
+| should be simply `float_exception_flags |= flags;'.
+*----------------------------------------------------------------------------*/
+
+void float_raise( int8 flags STATUS_PARAM )
+{
+    STATUS(float_exception_flags) |= flags;
+}
+
+/*----------------------------------------------------------------------------
+| Internal canonical NaN format.
+*----------------------------------------------------------------------------*/
+typedef struct {
+    flag sign;
+    bits64 high, low;
+} commonNaNT;
+
+/*----------------------------------------------------------------------------
+| The pattern for a default generated single-precision NaN.
+*----------------------------------------------------------------------------*/
+#if defined(TARGET_SPARC)
+#define float32_default_nan make_float32(0x7FFFFFFF)
+#elif defined(TARGET_POWERPC)
+#define float32_default_nan make_float32(0x7FC00000)
+#elif defined(TARGET_HPPA)
+#define float32_default_nan make_float32(0x7FA00000)
+#elif SNAN_BIT_IS_ONE
+#define float32_default_nan make_float32(0x7FBFFFFF)
+#else
+#define float32_default_nan make_float32(0xFFC00000)
+#endif
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the single-precision floating-point value `a' is a quiet
+| NaN; otherwise returns 0.
+*----------------------------------------------------------------------------*/
+
+int float32_is_nan( float32 a_ )
+{
+    uint32_t a = float32_val(a_);
+#if SNAN_BIT_IS_ONE
+    return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF );
+#else
+    return ( 0xFF800000 <= (bits32) ( a<<1 ) );
+#endif
+}
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the single-precision floating-point value `a' is a signaling
+| NaN; otherwise returns 0.
+*----------------------------------------------------------------------------*/
+
+int float32_is_signaling_nan( float32 a_ )
+{
+    uint32_t a = float32_val(a_);
+#if SNAN_BIT_IS_ONE
+    return ( 0xFF800000 <= (bits32) ( a<<1 ) );
+#else
+    return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF );
+#endif
+}
+
+/*----------------------------------------------------------------------------
+| Returns the result of converting the single-precision floating-point NaN
+| `a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
+| exception is raised.
+*----------------------------------------------------------------------------*/
+
+static commonNaNT float32ToCommonNaN( float32 a STATUS_PARAM )
+{
+    commonNaNT z;
+
+    if ( float32_is_signaling_nan( a ) ) float_raise( float_flag_invalid STATUS_VAR );
+    z.sign = float32_val(a)>>31;
+    z.low = 0;
+    z.high = ( (bits64) float32_val(a) )<<41;
+    return z;
+}
+
+/*----------------------------------------------------------------------------
+| Returns the result of converting the canonical NaN `a' to the single-
+| precision floating-point format.
+*----------------------------------------------------------------------------*/
+
+static float32 commonNaNToFloat32( commonNaNT a )
+{
+    bits32 mantissa = a.high>>41;
+    if ( mantissa )
+        return make_float32(
+            ( ( (bits32) a.sign )<<31 ) | 0x7F800000 | ( a.high>>41 ) );
+    else
+        return float32_default_nan;
+}
+
+/*----------------------------------------------------------------------------
+| Takes two single-precision floating-point values `a' and `b', one of which
+| is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
+| signaling NaN, the invalid exception is raised.
+*----------------------------------------------------------------------------*/
+
+static float32 propagateFloat32NaN( float32 a, float32 b STATUS_PARAM)
+{
+    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+    bits32 av, bv, res;
+
+    aIsNaN = float32_is_nan( a );
+    aIsSignalingNaN = float32_is_signaling_nan( a );
+    bIsNaN = float32_is_nan( b );
+    bIsSignalingNaN = float32_is_signaling_nan( b );
+    av = float32_val(a);
+    bv = float32_val(b);
+#if SNAN_BIT_IS_ONE
+    av &= ~0x00400000;
+    bv &= ~0x00400000;
+#else
+    av |= 0x00400000;
+    bv |= 0x00400000;
+#endif
+    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid STATUS_VAR);
+    if ( aIsSignalingNaN ) {
+        if ( bIsSignalingNaN ) goto returnLargerSignificand;
+        res = bIsNaN ? bv : av;
+    }
+    else if ( aIsNaN ) {
+        if ( bIsSignalingNaN | ! bIsNaN )
+            res = av;
+        else {
+ returnLargerSignificand:
+            if ( (bits32) ( av<<1 ) < (bits32) ( bv<<1 ) )
+                res = bv;
+            else if ( (bits32) ( bv<<1 ) < (bits32) ( av<<1 ) )
+                res = av;
+            else
+                res = ( av < bv ) ? av : bv;
+        }
+    }
+    else {
+        res = bv;
+    }
+    return make_float32(res);
+}
+
+/*----------------------------------------------------------------------------
+| The pattern for a default generated double-precision NaN.
+*----------------------------------------------------------------------------*/
+#if defined(TARGET_SPARC)
+#define float64_default_nan make_float64(LIT64( 0x7FFFFFFFFFFFFFFF ))
+#elif defined(TARGET_POWERPC)
+#define float64_default_nan make_float64(LIT64( 0x7FF8000000000000 ))
+#elif defined(TARGET_HPPA)
+#define float64_default_nan make_float64(LIT64( 0x7FF4000000000000 ))
+#elif SNAN_BIT_IS_ONE
+#define float64_default_nan make_float64(LIT64( 0x7FF7FFFFFFFFFFFF ))
+#else
+#define float64_default_nan make_float64(LIT64( 0xFFF8000000000000 ))
+#endif
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the double-precision floating-point value `a' is a quiet
+| NaN; otherwise returns 0.
+*----------------------------------------------------------------------------*/
+
+int float64_is_nan( float64 a_ )
+{
+    bits64 a = float64_val(a_);
+#if SNAN_BIT_IS_ONE
+    return
+           ( ( ( a>>51 ) & 0xFFF ) == 0xFFE )
+        && ( a & LIT64( 0x0007FFFFFFFFFFFF ) );
+#else
+    return ( LIT64( 0xFFF0000000000000 ) <= (bits64) ( a<<1 ) );
+#endif
+}
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the double-precision floating-point value `a' is a signaling
+| NaN; otherwise returns 0.
+*----------------------------------------------------------------------------*/
+
+int float64_is_signaling_nan( float64 a_ )
+{
+    bits64 a = float64_val(a_);
+#if SNAN_BIT_IS_ONE
+    return ( LIT64( 0xFFF0000000000000 ) <= (bits64) ( a<<1 ) );
+#else
+    return
+           ( ( ( a>>51 ) & 0xFFF ) == 0xFFE )
+        && ( a & LIT64( 0x0007FFFFFFFFFFFF ) );
+#endif
+}
+
+/*----------------------------------------------------------------------------
+| Returns the result of converting the double-precision floating-point NaN
+| `a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
+| exception is raised.
+*----------------------------------------------------------------------------*/
+
+static commonNaNT float64ToCommonNaN( float64 a STATUS_PARAM)
+{
+    commonNaNT z;
+
+    if ( float64_is_signaling_nan( a ) ) float_raise( float_flag_invalid STATUS_VAR);
+    z.sign = float64_val(a)>>63;
+    z.low = 0;
+    z.high = float64_val(a)<<12;
+    return z;
+}
+
+/*----------------------------------------------------------------------------
+| Returns the result of converting the canonical NaN `a' to the double-
+| precision floating-point format.
+*----------------------------------------------------------------------------*/
+
+static float64 commonNaNToFloat64( commonNaNT a )
+{
+    bits64 mantissa = a.high>>12;
+
+    if ( mantissa )
+        return make_float64(
+              ( ( (bits64) a.sign )<<63 )
+            | LIT64( 0x7FF0000000000000 )
+            | ( a.high>>12 ));
+    else
+        return float64_default_nan;
+}
+
+/*----------------------------------------------------------------------------
+| Takes two double-precision floating-point values `a' and `b', one of which
+| is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
+| signaling NaN, the invalid exception is raised.
+*----------------------------------------------------------------------------*/
+
+static float64 propagateFloat64NaN( float64 a, float64 b STATUS_PARAM)
+{
+    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+    bits64 av, bv, res;
+
+    aIsNaN = float64_is_nan( a );
+    aIsSignalingNaN = float64_is_signaling_nan( a );
+    bIsNaN = float64_is_nan( b );
+    bIsSignalingNaN = float64_is_signaling_nan( b );
+    av = float64_val(a);
+    bv = float64_val(b);
+#if SNAN_BIT_IS_ONE
+    av &= ~LIT64( 0x0008000000000000 );
+    bv &= ~LIT64( 0x0008000000000000 );
+#else
+    av |= LIT64( 0x0008000000000000 );
+    bv |= LIT64( 0x0008000000000000 );
+#endif
+    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid STATUS_VAR);
+    if ( aIsSignalingNaN ) {
+        if ( bIsSignalingNaN ) goto returnLargerSignificand;
+        res = bIsNaN ? bv : av;
+    }
+    else if ( aIsNaN ) {
+        if ( bIsSignalingNaN | ! bIsNaN )
+            res = av;
+        else {
+ returnLargerSignificand:
+            if ( (bits64) ( av<<1 ) < (bits64) ( bv<<1 ) )
+                res = bv;
+            else if ( (bits64) ( bv<<1 ) < (bits64) ( av<<1 ) )
+                res = av;
+            else
+                res = ( av < bv ) ? av : bv;
+        }
+    }
+    else {
+        res = bv;
+    }
+    return make_float64(res);
+}
+
+#ifdef FLOATX80
+
+/*----------------------------------------------------------------------------
+| The pattern for a default generated extended double-precision NaN.  The
+| `high' and `low' values hold the most- and least-significant bits,
+| respectively.
+*----------------------------------------------------------------------------*/
+#if SNAN_BIT_IS_ONE
+#define floatx80_default_nan_high 0x7FFF
+#define floatx80_default_nan_low  LIT64( 0xBFFFFFFFFFFFFFFF )
+#else
+#define floatx80_default_nan_high 0xFFFF
+#define floatx80_default_nan_low  LIT64( 0xC000000000000000 )
+#endif
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the extended double-precision floating-point value `a' is a
+| quiet NaN; otherwise returns 0.
+*----------------------------------------------------------------------------*/
+
+int floatx80_is_nan( floatx80 a )
+{
+#if SNAN_BIT_IS_ONE
+    bits64 aLow;
+
+    aLow = a.low & ~ LIT64( 0x4000000000000000 );
+    return
+           ( ( a.high & 0x7FFF ) == 0x7FFF )
+        && (bits64) ( aLow<<1 )
+        && ( a.low == aLow );
+#else
+    return ( ( a.high & 0x7FFF ) == 0x7FFF ) && (bits64) ( a.low<<1 );
+#endif
+}
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the extended double-precision floating-point value `a' is a
+| signaling NaN; otherwise returns 0.
+*----------------------------------------------------------------------------*/
+
+int floatx80_is_signaling_nan( floatx80 a )
+{
+#if SNAN_BIT_IS_ONE
+    return ( ( a.high & 0x7FFF ) == 0x7FFF ) && (bits64) ( a.low<<1 );
+#else
+    bits64 aLow;
+
+    aLow = a.low & ~ LIT64( 0x4000000000000000 );
+    return
+           ( ( a.high & 0x7FFF ) == 0x7FFF )
+        && (bits64) ( aLow<<1 )
+        && ( a.low == aLow );
+#endif
+}
+
+/*----------------------------------------------------------------------------
+| Returns the result of converting the extended double-precision floating-
+| point NaN `a' to the canonical NaN format.  If `a' is a signaling NaN, the
+| invalid exception is raised.
+*----------------------------------------------------------------------------*/
+
+static commonNaNT floatx80ToCommonNaN( floatx80 a STATUS_PARAM)
+{
+    commonNaNT z;
+
+    if ( floatx80_is_signaling_nan( a ) ) float_raise( float_flag_invalid STATUS_VAR);
+    z.sign = a.high>>15;
+    z.low = 0;
+    z.high = a.low;
+    return z;
+}
+
+/*----------------------------------------------------------------------------
+| Returns the result of converting the canonical NaN `a' to the extended
+| double-precision floating-point format.
+*----------------------------------------------------------------------------*/
+
+static floatx80 commonNaNToFloatx80( commonNaNT a )
+{
+    floatx80 z;
+
+    if (a.high)
+        z.low = a.high;
+    else
+        z.low = floatx80_default_nan_low;
+    z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF;
+    return z;
+}
+
+/*----------------------------------------------------------------------------
+| Takes two extended double-precision floating-point values `a' and `b', one
+| of which is a NaN, and returns the appropriate NaN result.  If either `a' or
+| `b' is a signaling NaN, the invalid exception is raised.
+*----------------------------------------------------------------------------*/
+
+static floatx80 propagateFloatx80NaN( floatx80 a, floatx80 b STATUS_PARAM)
+{
+    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+
+    aIsNaN = floatx80_is_nan( a );
+    aIsSignalingNaN = floatx80_is_signaling_nan( a );
+    bIsNaN = floatx80_is_nan( b );
+    bIsSignalingNaN = floatx80_is_signaling_nan( b );
+#if SNAN_BIT_IS_ONE
+    a.low &= ~LIT64( 0xC000000000000000 );
+    b.low &= ~LIT64( 0xC000000000000000 );
+#else
+    a.low |= LIT64( 0xC000000000000000 );
+    b.low |= LIT64( 0xC000000000000000 );
+#endif
+    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid STATUS_VAR);
+    if ( aIsSignalingNaN ) {
+        if ( bIsSignalingNaN ) goto returnLargerSignificand;
+        return bIsNaN ? b : a;
+    }
+    else if ( aIsNaN ) {
+        if ( bIsSignalingNaN | ! bIsNaN ) return a;
+ returnLargerSignificand:
+        if ( a.low < b.low ) return b;
+        if ( b.low < a.low ) return a;
+        return ( a.high < b.high ) ? a : b;
+    }
+    else {
+        return b;
+    }
+}
+
+#endif
+
+#ifdef FLOAT128
+
+/*----------------------------------------------------------------------------
+| The pattern for a default generated quadruple-precision NaN.  The `high' and
+| `low' values hold the most- and least-significant bits, respectively.
+*----------------------------------------------------------------------------*/
+#if SNAN_BIT_IS_ONE
+#define float128_default_nan_high LIT64( 0x7FFF7FFFFFFFFFFF )
+#define float128_default_nan_low  LIT64( 0xFFFFFFFFFFFFFFFF )
+#else
+#define float128_default_nan_high LIT64( 0xFFFF800000000000 )
+#define float128_default_nan_low  LIT64( 0x0000000000000000 )
+#endif
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the quadruple-precision floating-point value `a' is a quiet
+| NaN; otherwise returns 0.
+*----------------------------------------------------------------------------*/
+
+int float128_is_nan( float128 a )
+{
+#if SNAN_BIT_IS_ONE
+    return
+           ( ( ( a.high>>47 ) & 0xFFFF ) == 0xFFFE )
+        && ( a.low || ( a.high & LIT64( 0x00007FFFFFFFFFFF ) ) );
+#else
+    return
+           ( LIT64( 0xFFFE000000000000 ) <= (bits64) ( a.high<<1 ) )
+        && ( a.low || ( a.high & LIT64( 0x0000FFFFFFFFFFFF ) ) );
+#endif
+}
+
+/*----------------------------------------------------------------------------
+| Returns 1 if the quadruple-precision floating-point value `a' is a
+| signaling NaN; otherwise returns 0.
+*----------------------------------------------------------------------------*/
+
+int float128_is_signaling_nan( float128 a )
+{
+#if SNAN_BIT_IS_ONE
+    return
+           ( LIT64( 0xFFFE000000000000 ) <= (bits64) ( a.high<<1 ) )
+        && ( a.low || ( a.high & LIT64( 0x0000FFFFFFFFFFFF ) ) );
+#else
+    return
+           ( ( ( a.high>>47 ) & 0xFFFF ) == 0xFFFE )
+        && ( a.low || ( a.high & LIT64( 0x00007FFFFFFFFFFF ) ) );
+#endif
+}
+
+/*----------------------------------------------------------------------------
+| Returns the result of converting the quadruple-precision floating-point NaN
+| `a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
+| exception is raised.
+*----------------------------------------------------------------------------*/
+
+static commonNaNT float128ToCommonNaN( float128 a STATUS_PARAM)
+{
+    commonNaNT z;
+
+    if ( float128_is_signaling_nan( a ) ) float_raise( float_flag_invalid STATUS_VAR);
+    z.sign = a.high>>63;
+    shortShift128Left( a.high, a.low, 16, &z.high, &z.low );
+    return z;
+}
+
+/*----------------------------------------------------------------------------
+| Returns the result of converting the canonical NaN `a' to the quadruple-
+| precision floating-point format.
+*----------------------------------------------------------------------------*/
+
+static float128 commonNaNToFloat128( commonNaNT a )
+{
+    float128 z;
+
+    shift128Right( a.high, a.low, 16, &z.high, &z.low );
+    z.high |= ( ( (bits64) a.sign )<<63 ) | LIT64( 0x7FFF000000000000 );
+    return z;
+}
+
+/*----------------------------------------------------------------------------
+| Takes two quadruple-precision floating-point values `a' and `b', one of
+| which is a NaN, and returns the appropriate NaN result.  If either `a' or
+| `b' is a signaling NaN, the invalid exception is raised.
+*----------------------------------------------------------------------------*/
+
+static float128 propagateFloat128NaN( float128 a, float128 b STATUS_PARAM)
+{
+    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+
+    aIsNaN = float128_is_nan( a );
+    aIsSignalingNaN = float128_is_signaling_nan( a );
+    bIsNaN = float128_is_nan( b );
+    bIsSignalingNaN = float128_is_signaling_nan( b );
+#if SNAN_BIT_IS_ONE
+    a.high &= ~LIT64( 0x0000800000000000 );
+    b.high &= ~LIT64( 0x0000800000000000 );
+#else
+    a.high |= LIT64( 0x0000800000000000 );
+    b.high |= LIT64( 0x0000800000000000 );
+#endif
+    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid STATUS_VAR);
+    if ( aIsSignalingNaN ) {
+        if ( bIsSignalingNaN ) goto returnLargerSignificand;
+        return bIsNaN ? b : a;
+    }
+    else if ( aIsNaN ) {
+        if ( bIsSignalingNaN | ! bIsNaN ) return a;
+ returnLargerSignificand:
+        if ( lt128( a.high<<1, a.low, b.high<<1, b.low ) ) return b;
+        if ( lt128( b.high<<1, b.low, a.high<<1, a.low ) ) return a;
+        return ( a.high < b.high ) ? a : b;
+    }
+    else {
+        return b;
+    }
+}
+
+#endif