auto import from //depot/cupcake/@135843

1 files changed, 0 insertions, 291 deletions

diff --git a/hw/usb.h b/hw/usb.h
deleted file mode 100644
index 1a353bb..0000000
--- a/hw/usb.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * QEMU USB API
- *
- * Copyright (c) 2005 Fabrice Bellard
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-#define USB_TOKEN_SETUP 0x2d
-#define USB_TOKEN_IN    0x69 /* device -> host */
-#define USB_TOKEN_OUT   0xe1 /* host -> device */
-
-/* specific usb messages, also sent in the 'pid' parameter */
-#define USB_MSG_ATTACH   0x100
-#define USB_MSG_DETACH   0x101
-#define USB_MSG_RESET    0x102
-
-#define USB_RET_NODEV  (-1)
-#define USB_RET_NAK    (-2)
-#define USB_RET_STALL  (-3)
-#define USB_RET_BABBLE (-4)
-#define USB_RET_ASYNC  (-5)
-
-#define USB_SPEED_LOW   0
-#define USB_SPEED_FULL  1
-#define USB_SPEED_HIGH  2
-
-#define USB_STATE_NOTATTACHED 0
-#define USB_STATE_ATTACHED    1
-//#define USB_STATE_POWERED     2
-#define USB_STATE_DEFAULT     3
-//#define USB_STATE_ADDRESS     4
-//#define	USB_STATE_CONFIGURED  5
-#define USB_STATE_SUSPENDED   6
-
-#define USB_CLASS_AUDIO			1
-#define USB_CLASS_COMM			2
-#define USB_CLASS_HID			3
-#define USB_CLASS_PHYSICAL		5
-#define USB_CLASS_STILL_IMAGE		6
-#define USB_CLASS_PRINTER		7
-#define USB_CLASS_MASS_STORAGE		8
-#define USB_CLASS_HUB			9
-#define USB_CLASS_CDC_DATA		0x0a
-#define USB_CLASS_CSCID			0x0b
-#define USB_CLASS_CONTENT_SEC		0x0d
-#define USB_CLASS_APP_SPEC		0xfe
-#define USB_CLASS_VENDOR_SPEC		0xff
-
-#define USB_DIR_OUT			0
-#define USB_DIR_IN			0x80
-
-#define USB_TYPE_MASK			(0x03 << 5)
-#define USB_TYPE_STANDARD		(0x00 << 5)
-#define USB_TYPE_CLASS			(0x01 << 5)
-#define USB_TYPE_VENDOR			(0x02 << 5)
-#define USB_TYPE_RESERVED		(0x03 << 5)
-
-#define USB_RECIP_MASK			0x1f
-#define USB_RECIP_DEVICE		0x00
-#define USB_RECIP_INTERFACE		0x01
-#define USB_RECIP_ENDPOINT		0x02
-#define USB_RECIP_OTHER			0x03
-
-#define DeviceRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
-#define DeviceOutRequest ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
-#define InterfaceRequest \
-        ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
-#define InterfaceOutRequest \
-        ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
-#define EndpointRequest ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
-#define EndpointOutRequest \
-        ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
-
-#define USB_REQ_GET_STATUS		0x00
-#define USB_REQ_CLEAR_FEATURE		0x01
-#define USB_REQ_SET_FEATURE		0x03
-#define USB_REQ_SET_ADDRESS		0x05
-#define USB_REQ_GET_DESCRIPTOR		0x06
-#define USB_REQ_SET_DESCRIPTOR		0x07
-#define USB_REQ_GET_CONFIGURATION	0x08
-#define USB_REQ_SET_CONFIGURATION	0x09
-#define USB_REQ_GET_INTERFACE		0x0A
-#define USB_REQ_SET_INTERFACE		0x0B
-#define USB_REQ_SYNCH_FRAME		0x0C
-
-#define USB_DEVICE_SELF_POWERED		0
-#define USB_DEVICE_REMOTE_WAKEUP	1
-
-#define USB_DT_DEVICE			0x01
-#define USB_DT_CONFIG			0x02
-#define USB_DT_STRING			0x03
-#define USB_DT_INTERFACE		0x04
-#define USB_DT_ENDPOINT			0x05
-
-#define USB_ENDPOINT_XFER_CONTROL	0
-#define USB_ENDPOINT_XFER_ISOC		1
-#define USB_ENDPOINT_XFER_BULK		2
-#define USB_ENDPOINT_XFER_INT		3
-
-typedef struct USBPort USBPort;
-typedef struct USBDevice USBDevice;
-typedef struct USBPacket USBPacket;
-
-/* definition of a USB device */
-struct USBDevice {
-    void *opaque;
-
-    /* 
-     * Process USB packet. 
-     * Called by the HC (Host Controller).
-     *
-     * Returns length of the transaction 
-     * or one of the USB_RET_XXX codes.
-     */ 
-    int (*handle_packet)(USBDevice *dev, USBPacket *p);
-
-    /* 
-     * Called when device is destroyed.
-     */
-    void (*handle_destroy)(USBDevice *dev);
-
-    int speed;
-
-    /* The following fields are used by the generic USB device
-       layer. They are here just to avoid creating a new structure 
-       for them. */
-
-    /*
-     * Reset the device
-     */  
-    void (*handle_reset)(USBDevice *dev);
-
-    /*
-     * Process control request.
-     * Called from handle_packet().
-     *
-     * Returns length or one of the USB_RET_ codes.
-     */
-    int (*handle_control)(USBDevice *dev, int request, int value,
-                          int index, int length, uint8_t *data);
-
-    /*
-     * Process data transfers (both BULK and ISOC).
-     * Called from handle_packet().
-     *
-     * Returns length or one of the USB_RET_ codes.
-     */
-    int (*handle_data)(USBDevice *dev, USBPacket *p);
-
-    uint8_t addr;
-    char devname[32];
-
-    int state;
-    uint8_t setup_buf[8];
-    uint8_t data_buf[1024];
-    int remote_wakeup;
-    int setup_state;
-    int setup_len;
-    int setup_index;
-};
-
-typedef void (*usb_attachfn)(USBPort *port, USBDevice *dev);
-
-/* USB port on which a device can be connected */
-struct USBPort {
-    USBDevice *dev;
-    usb_attachfn attach;
-    void *opaque;
-    int index; /* internal port index, may be used with the opaque */
-    struct USBPort *next; /* Used internally by qemu.  */
-};
-
-typedef void USBCallback(USBPacket * packet, void *opaque);
-
-/* Structure used to hold information about an active USB packet.  */
-struct USBPacket {
-    /* Data fields for use by the driver.  */
-    int pid;
-    uint8_t devaddr;
-    uint8_t devep;
-    uint8_t *data;
-    int len;
-    /* Internal use by the USB layer.  */
-    USBCallback *complete_cb;
-    void *complete_opaque;
-    USBCallback *cancel_cb;
-    void *cancel_opaque;
-};
-
-/* Defer completion of a USB packet.  The hadle_packet routine should then
-   return USB_RET_ASYNC.  Packets that complete immediately (before
-   handle_packet returns) should not call this method.  */
-static inline void usb_defer_packet(USBPacket *p, USBCallback *cancel,
-                                    void * opaque)
-{
-    p->cancel_cb = cancel;
-    p->cancel_opaque = opaque;
-}
-
-/* Notify the controller that an async packet is complete.  This should only
-   be called for packets previously deferred with usb_defer_packet, and
-   should never be called from within handle_packet.  */
-static inline void usb_packet_complete(USBPacket *p)
-{
-    p->complete_cb(p, p->complete_opaque);
-}
-
-/* Cancel an active packet.  The packed must have been deferred with
-   usb_defer_packet,  and not yet completed.  */
-static inline void usb_cancel_packet(USBPacket * p)
-{
-    p->cancel_cb(p, p->cancel_opaque);
-}
-
-int usb_device_add_dev(USBDevice *dev);
-int usb_device_del_addr(int bus_num, int addr);
-void usb_attach(USBPort *port, USBDevice *dev);
-int usb_generic_handle_packet(USBDevice *s, USBPacket *p);
-int set_usb_string(uint8_t *buf, const char *str);
-void usb_send_msg(USBDevice *dev, int msg);
-
-/* usb hub */
-USBDevice *usb_hub_init(int nb_ports);
-
-/* usb-linux.c */
-USBDevice *usb_host_device_open(const char *devname);
-int usb_host_device_close(const char *devname);
-void usb_host_info(void);
-
-/* usb-hid.c */
-USBDevice *usb_mouse_init(void);
-USBDevice *usb_tablet_init(void);
-USBDevice *usb_keyboard_init(void);
-
-/* usb-msd.c */
-USBDevice *usb_msd_init(const char *filename);
-
-/* usb-net.c */
-USBDevice *usb_net_init(NICInfo *nd);
-
-/* usb-wacom.c */
-USBDevice *usb_wacom_init(void);
-
-/* usb-serial.c */
-USBDevice *usb_serial_init(const char *filename);
-
-/* usb ports of the VM */
-
-void qemu_register_usb_port(USBPort *port, void *opaque, int index,
-                            usb_attachfn attach);
-
-#define VM_USB_HUB_SIZE 8
-
-/* usb-musb.c */
-enum musb_irq_source_e {
-    musb_irq_suspend = 0,
-    musb_irq_resume,
-    musb_irq_rst_babble,
-    musb_irq_sof,
-    musb_irq_connect,
-    musb_irq_disconnect,
-    musb_irq_vbus_request,
-    musb_irq_vbus_error,
-    musb_irq_rx,
-    musb_irq_tx,
-    musb_set_vbus,
-    musb_set_session,
-    __musb_irq_max,
-};
-
-struct musb_s;
-struct musb_s *musb_init(qemu_irq *irqs);
-uint32_t musb_core_intr_get(struct musb_s *s);
-void musb_core_intr_clear(struct musb_s *s, uint32_t mask);
-void musb_set_size(struct musb_s *s, int epnum, int size, int is_tx);