diff options
Diffstat (limited to 'distrib/sdl-1.2.15/src/audio/bsd/SDL_bsdaudio.c')
-rw-r--r-- | distrib/sdl-1.2.15/src/audio/bsd/SDL_bsdaudio.c | 404 |
1 files changed, 404 insertions, 0 deletions
diff --git a/distrib/sdl-1.2.15/src/audio/bsd/SDL_bsdaudio.c b/distrib/sdl-1.2.15/src/audio/bsd/SDL_bsdaudio.c new file mode 100644 index 0000000..e5e0d94 --- /dev/null +++ b/distrib/sdl-1.2.15/src/audio/bsd/SDL_bsdaudio.c @@ -0,0 +1,404 @@ +/* + SDL - Simple DirectMedia Layer + Copyright (C) 1997-2012 Sam Lantinga + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with this library; if not, write to the Free + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + Sam Lantinga + slouken@libsdl.org +*/ +#include "SDL_config.h" + +/* + * Driver for native OpenBSD/NetBSD audio(4). + * vedge@vedge.com.ar. + */ + +#include <errno.h> +#include <unistd.h> +#include <fcntl.h> +#include <sys/time.h> +#include <sys/ioctl.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <sys/audioio.h> + +#include "SDL_timer.h" +#include "SDL_audio.h" +#include "../SDL_audiomem.h" +#include "../SDL_audio_c.h" +#include "../SDL_audiodev_c.h" +#include "SDL_bsdaudio.h" + +/* The tag name used by NetBSD/OpenBSD audio */ +#ifdef __NetBSD__ +#define BSD_AUDIO_DRIVER_NAME "netbsd" +#define BSD_AUDIO_DRIVER_DESC "Native NetBSD audio" +#else +#define BSD_AUDIO_DRIVER_NAME "openbsd" +#define BSD_AUDIO_DRIVER_DESC "Native OpenBSD audio" +#endif + +/* Open the audio device for playback, and don't block if busy */ +/* #define USE_BLOCKING_WRITES */ + +/* Use timer for synchronization */ +/* #define USE_TIMER_SYNC */ + +/* #define DEBUG_AUDIO */ +/* #define DEBUG_AUDIO_STREAM */ + +#ifdef USE_BLOCKING_WRITES +#define OPEN_FLAGS O_WRONLY +#else +#define OPEN_FLAGS (O_WRONLY|O_NONBLOCK) +#endif + +/* Audio driver functions */ +static void OBSD_WaitAudio(_THIS); +static int OBSD_OpenAudio(_THIS, SDL_AudioSpec *spec); +static void OBSD_PlayAudio(_THIS); +static Uint8 *OBSD_GetAudioBuf(_THIS); +static void OBSD_CloseAudio(_THIS); + +#ifdef DEBUG_AUDIO +static void OBSD_Status(_THIS); +#endif + +/* Audio driver bootstrap functions */ + +static int +Audio_Available(void) +{ + int fd; + int available; + + available = 0; + fd = SDL_OpenAudioPath(NULL, 0, OPEN_FLAGS, 0); + if(fd >= 0) { + available = 1; + close(fd); + } + return(available); +} + +static void +Audio_DeleteDevice(SDL_AudioDevice *device) +{ + SDL_free(device->hidden); + SDL_free(device); +} + +static SDL_AudioDevice +*Audio_CreateDevice(int devindex) +{ + SDL_AudioDevice *this; + + /* Initialize all variables that we clean on shutdown */ + this = (SDL_AudioDevice*)SDL_malloc(sizeof(SDL_AudioDevice)); + if(this) { + SDL_memset(this, 0, (sizeof *this)); + this->hidden = + (struct SDL_PrivateAudioData*)SDL_malloc((sizeof *this->hidden)); + } + if((this == NULL) || (this->hidden == NULL)) { + SDL_OutOfMemory(); + if(this) SDL_free(this); + return(0); + } + SDL_memset(this->hidden, 0, (sizeof *this->hidden)); + audio_fd = -1; + + /* Set the function pointers */ + this->OpenAudio = OBSD_OpenAudio; + this->WaitAudio = OBSD_WaitAudio; + this->PlayAudio = OBSD_PlayAudio; + this->GetAudioBuf = OBSD_GetAudioBuf; + this->CloseAudio = OBSD_CloseAudio; + + this->free = Audio_DeleteDevice; + + return this; +} + +AudioBootStrap BSD_AUDIO_bootstrap = { + BSD_AUDIO_DRIVER_NAME, BSD_AUDIO_DRIVER_DESC, + Audio_Available, Audio_CreateDevice +}; + +/* This function waits until it is possible to write a full sound buffer */ +static void +OBSD_WaitAudio(_THIS) +{ +#ifndef USE_BLOCKING_WRITES /* Not necessary when using blocking writes */ + /* See if we need to use timed audio synchronization */ + if ( frame_ticks ) { + /* Use timer for general audio synchronization */ + Sint32 ticks; + + ticks = ((Sint32)(next_frame - SDL_GetTicks()))-FUDGE_TICKS; + if ( ticks > 0 ) { + SDL_Delay(ticks); + } + } else { + /* Use select() for audio synchronization */ + fd_set fdset; + struct timeval timeout; + + FD_ZERO(&fdset); + FD_SET(audio_fd, &fdset); + timeout.tv_sec = 10; + timeout.tv_usec = 0; +#ifdef DEBUG_AUDIO + fprintf(stderr, "Waiting for audio to get ready\n"); +#endif + if ( select(audio_fd+1, NULL, &fdset, NULL, &timeout) <= 0 ) { + const char *message = + "Audio timeout - buggy audio driver? (disabled)"; + /* In general we should never print to the screen, + but in this case we have no other way of letting + the user know what happened. + */ + fprintf(stderr, "SDL: %s\n", message); + this->enabled = 0; + /* Don't try to close - may hang */ + audio_fd = -1; +#ifdef DEBUG_AUDIO + fprintf(stderr, "Done disabling audio\n"); +#endif + } +#ifdef DEBUG_AUDIO + fprintf(stderr, "Ready!\n"); +#endif + } +#endif /* !USE_BLOCKING_WRITES */ +} + +static void +OBSD_PlayAudio(_THIS) +{ + int written, p=0; + + /* Write the audio data, checking for EAGAIN on broken audio drivers */ + do { + written = write(audio_fd, &mixbuf[p], mixlen-p); + if (written>0) + p += written; + if (written == -1 && errno != 0 && errno != EAGAIN && errno != EINTR) + { + /* Non recoverable error has occurred. It should be reported!!! */ + perror("audio"); + break; + } + + if ( p < written || ((written < 0) && ((errno == 0) || (errno == EAGAIN))) ) { + SDL_Delay(1); /* Let a little CPU time go by */ + } + } while ( p < written ); + + /* If timer synchronization is enabled, set the next write frame */ + if ( frame_ticks ) { + next_frame += frame_ticks; + } + + /* If we couldn't write, assume fatal error for now */ + if ( written < 0 ) { + this->enabled = 0; + } +#ifdef DEBUG_AUDIO + fprintf(stderr, "Wrote %d bytes of audio data\n", written); +#endif +} + +static Uint8 +*OBSD_GetAudioBuf(_THIS) +{ + return(mixbuf); +} + +static void +OBSD_CloseAudio(_THIS) +{ + if(mixbuf != NULL) { + SDL_FreeAudioMem(mixbuf); + mixbuf = NULL; + } + if(audio_fd >= 0) { + close(audio_fd); + audio_fd = -1; + } +} + +#ifdef DEBUG_AUDIO +void +OBSD_Status(_THIS) +{ + audio_info_t info; + + if(ioctl(audio_fd, AUDIO_GETINFO, &info) < 0) { + fprintf(stderr,"AUDIO_GETINFO failed.\n"); + return; + } + + fprintf(stderr,"\n" +"[play/record info]\n" +"buffer size : %d bytes\n" +"sample rate : %i Hz\n" +"channels : %i\n" +"precision : %i-bit\n" +"encoding : 0x%x\n" +"seek : %i\n" +"sample count : %i\n" +"EOF count : %i\n" +"paused : %s\n" +"error occured : %s\n" +"waiting : %s\n" +"active : %s\n" +"", + info.play.buffer_size, + info.play.sample_rate, + info.play.channels, + info.play.precision, + info.play.encoding, + info.play.seek, + info.play.samples, + info.play.eof, + info.play.pause ? "yes" : "no", + info.play.error ? "yes" : "no", + info.play.waiting ? "yes" : "no", + info.play.active ? "yes": "no"); + + fprintf(stderr,"\n" +"[audio info]\n" +"monitor_gain : %i\n" +"hw block size : %d bytes\n" +"hi watermark : %i\n" +"lo watermark : %i\n" +"audio mode : %s\n" +"", + info.monitor_gain, + info.blocksize, + info.hiwat, info.lowat, + (info.mode == AUMODE_PLAY) ? "PLAY" + : (info.mode = AUMODE_RECORD) ? "RECORD" + : (info.mode == AUMODE_PLAY_ALL ? "PLAY_ALL" + : "?")); +} +#endif /* DEBUG_AUDIO */ + +static int +OBSD_OpenAudio(_THIS, SDL_AudioSpec *spec) +{ + char audiodev[64]; + Uint16 format; + audio_info_t info; + + AUDIO_INITINFO(&info); + + /* Calculate the final parameters for this audio specification */ + SDL_CalculateAudioSpec(spec); + +#ifdef USE_TIMER_SYNC + frame_ticks = 0.0; +#endif + + /* Open the audio device */ + audio_fd = SDL_OpenAudioPath(audiodev, sizeof(audiodev), OPEN_FLAGS, 0); + if(audio_fd < 0) { + SDL_SetError("Couldn't open %s: %s", audiodev, strerror(errno)); + return(-1); + } + + /* Set to play mode */ + info.mode = AUMODE_PLAY; + if(ioctl(audio_fd, AUDIO_SETINFO, &info) < 0) { + SDL_SetError("Couldn't put device into play mode"); + return(-1); + } + + mixbuf = NULL; + AUDIO_INITINFO(&info); + for (format = SDL_FirstAudioFormat(spec->format); + format; format = SDL_NextAudioFormat()) + { + switch(format) { + case AUDIO_U8: + info.play.encoding = AUDIO_ENCODING_ULINEAR; + info.play.precision = 8; + break; + case AUDIO_S8: + info.play.encoding = AUDIO_ENCODING_SLINEAR; + info.play.precision = 8; + break; + case AUDIO_S16LSB: + info.play.encoding = AUDIO_ENCODING_SLINEAR_LE; + info.play.precision = 16; + break; + case AUDIO_S16MSB: + info.play.encoding = AUDIO_ENCODING_SLINEAR_BE; + info.play.precision = 16; + break; + case AUDIO_U16LSB: + info.play.encoding = AUDIO_ENCODING_ULINEAR_LE; + info.play.precision = 16; + break; + case AUDIO_U16MSB: + info.play.encoding = AUDIO_ENCODING_ULINEAR_BE; + info.play.precision = 16; + break; + default: + continue; + } + if (ioctl(audio_fd, AUDIO_SETINFO, &info) == 0) + break; + } + + if(!format) { + SDL_SetError("No supported encoding for 0x%x", spec->format); + return(-1); + } + + spec->format = format; + + AUDIO_INITINFO(&info); + info.play.channels = spec->channels; + if (ioctl(audio_fd, AUDIO_SETINFO, &info) == -1) + spec->channels = 1; + AUDIO_INITINFO(&info); + info.play.sample_rate = spec->freq; + info.blocksize = spec->size; + info.hiwat = 5; + info.lowat = 3; + (void)ioctl(audio_fd, AUDIO_SETINFO, &info); + (void)ioctl(audio_fd, AUDIO_GETINFO, &info); + spec->freq = info.play.sample_rate; + /* Allocate mixing buffer */ + mixlen = spec->size; + mixbuf = (Uint8*)SDL_AllocAudioMem(mixlen); + if(mixbuf == NULL) { + return(-1); + } + SDL_memset(mixbuf, spec->silence, spec->size); + + /* Get the parent process id (we're the parent of the audio thread) */ + parent = getpid(); + +#ifdef DEBUG_AUDIO + OBSD_Status(this); +#endif + + /* We're ready to rock and roll. :-) */ + return(0); +} |