Merge WebKit at r74534: Initial merge by git.

Change-Id: I6ccd1154fa1b19c2ec2a66878eb675738735f1eb

55 files changed, 0 insertions, 20457 deletions

diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/README.amiga b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/README.amiga
deleted file mode 100644
index 0efdb93..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/README.amiga
+++ /dev/null
@@ -1,72 +0,0 @@
-
-This file, ./MISC/Amiga/README.amiga, describes the necessary steps to get
-the FLEX 2.5.1 program up and running on the Commodore AMIGA with the
-help of SAS/C++ 6.51 and SMake 6.50.  Also it describes the contents of the
-subdirectory ./MISC/Amiga, where `.' denotes the root directory of the
-standard installation of FLEX 2.5.1.
-
-
-FILES ADDED FOR INSTALLING FLEX 2.5.1 ON THE AMIGA
-
-The standard distribution of FLEX 2.5.1 is assumed to be installed on
-your AMIGA computer.  `Installed' means that all source files from the
-original archive are present in a root directory (denoted by `.' in what
-follows) and, if appropriate, one or more subdirectories, on your machine.
-
-The original source files are totally left untouched, the necessary changes
-are applied in the form of `change files'.  For installing FLEX 2.5.1 on
-the AMIGA, several additional files come with this patch.
-
-     -----rw-d       2      738 Apr  3 11:49 config.h
-     -----rw-d       1      169 Apr  3 11:33 libmain.ch
-     -----rw-d       1      159 Apr  3 11:33 libyywrap.ch
-     -----rw-d       1      167 Apr  3 11:33 parse.ych
-     -----rw-d       6     2840 Apr  3 11:34 README.amiga
-     -----rw-d      11     5503 Apr  3 11:45 smakefile
-     Dirs:0    Files:6    Blocks:22    Bytes:9576
-
-
-HOW TO INSTALL FLEX 2.5.1 ON THE AMIGA
-
-Copy all files from ./MISC/Amiga to the root directory of the FLEX 2.5.1
-distribution and edit `SMakefile' as it instructs you.  There shouldn't be
-too many changes necessary.  Then say "make bootflex".  This creates a
-preliminary version of FLEX 2.5.1 without using itself.
-
-WARNING: Don't say "make flex" yet.  Any pre-2.5 version of FLEX will fail
-on the file `scan.l' due to some new features only present in FLEX 2.5.
-
-Then say "make flex".  At least once the FLEX program created in the first
-step will be used.  To make sure that everything is alright, finally say
-"make check".  If you change the code, you should also say "make bigcheck"
-for some more thorough testing.
-
-When you are satisfied with the results, say "make install".  This will
-copy the `flex' binary, the `libfl.lib' file, and the `FlexLexer.h' header
-to the paths specified in the `SMakefile'.
-
-Finally, you should say "make clean" to remove all intermediate files from
-the root directory.  "make veryclean" also removes `flex' and `scan.c'.
-
-
-TROUBLE SHOOTING
-
-FLEX 2.5.1 was ported to the AMIGA and tested with the following setup:
-
-	AMIGA 2000
-	GVP G-Force 030/50/50/8
-	SAS/C++ 6.51
-	SED 2.05
-	BISON 1.22
-	WMERGE from the CWEB distribution
-
-Should you encounter problems with this AMIGA patch for FLEX 2.5.1 or
-should you have ideas for further improvements, like using GnuMake instead
-of SMake, contact the author of this contribution
-
-Andreas Scherer
-Roland-Stra{\ss}e 16
-52070 Aachen
-Germany
-
-<scherer@genesis.informatik.rwth-aachen.de> (Internet)
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/SMakefile b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/SMakefile
deleted file mode 100644
index 28e0dd4..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/SMakefile
+++ /dev/null
@@ -1,195 +0,0 @@
-# @(#) $Header: Makefile.in,v 1.2 94/01/04 14:33:19 vern Exp $ (LBL)
-
-# If your version of "make" does not define $(MAKE), comment in the
-# definition of "MAKE" below.  (You only need to do this if you intend
-# to do "make bigcheck" or "make dist".)
-MAKE = smake
-
-# Possible values for DEFS:
-#
-# For flex to always generate 8-bit scanners, add "-DDEFAULT_CSIZE=256"
-# to DEFS.
-#
-# For Vax/VMS, add "-DVMS" to DEFS.
-#
-# For MS-DOS, add "-DMS_DOS" to DEFS.  See the directory MISC/MSDOS for
-# additional info.
-
-CFLAGS = data=far ignore=85 noicons stackextend optimize
-DEFS = define=YYBISON=1 define=YY_NEVER_INTERACTIVE=1
-LDFLAGS = noicons
-LIBS =
-
-# Installation targeting.  Files will be installed under the tree
-# rooted at prefix.  flex will be installed in bindir, libfl.lib in
-# libdir, FlexLexer.h will be installed in includedir, and the manual
-# pages will be installed in mandir with extension manext.
-# 
-# Raw, unformatted troff source will be installed if INSTALLMAN=man,
-# nroff preformatted versions will be installed if INSTALLMAN=cat.
-
-prefix = Programmer:other # Change this for your AMIGA system.
-exec_prefix = $(prefix)
-bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
-includedir = $(prefix)/include
-manext = 1
-mandir = $(prefix)/man/man$(manext)
-
-# You can define this to be "lex" if you want to replace lex at your site.
-FLEX = flex
-
-INSTALLMAN = man
-
-SHELL =
-srcdir = .
-VPATH =
-
-LN_S =
-YACC = bison -y
-SED = sed
-CC = sc
-WMERGE = wmerge # from the CWEB distribution
-AR = oml
-RANLIB =
-INSTALL = copy clone
-INSTALL_DATA = $(INSTALL)
-INSTALL_PROGRAM = $(INSTALL)
-
-# You normally do not need to modify anything below this point.
-# ------------------------------------------------------------
-
-CPPFLAGS = idir=. idir=$(srcdir) $(DEFS)
-
-.c.o:
-	$(CC) $(CPPFLAGS) $(CFLAGS) $<
-
-HEADERS = flexdef.h version.h
-
-SOURCES = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.y \
-	scan.l skel.c sym.c tblcmp.c yylex.c
-OBJECTS = ccl.o dfa.o ecs.o gen.o main.o misc.o nfa.o parse.o \
-	skel.o sym.o tblcmp.o yylex.o \
-	$(libdir)/alloca.o $(libdir)/xmalloc.o
-
-LIBSRCS = libmain.c libyywrap.c
-LIBOBJS = ansilibmain.o ansilibyywrap.o
-
-LINTSRCS = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.c \
-	scan.c skel.c sym.c tblcmp.c yylex.c
-
-DISTFILES = README NEWS COPYING INSTALL FlexLexer.h \
-	configure.in conf.in Makefile.in mkskel.sh skel.c flex.skl \
-	$(HEADERS) $(SOURCES) $(LIBSRCS) MISC \
-	flex.1 scan.c install.sh mkinstalldirs configure
-
-DIST_NAME = flex
-
-# which "flex" to use to generate scan.c from scan.l
-FLEX_EXEC = ./$(FLEX)
-FLEX_FLAGS = -t $(PERF_REPORT)
-COMPRESSION =
-PERF_REPORT = -p
-
-FLEXLIB = libfl.lib
-
-all: $(FLEX)
-
-$(FLEX): $(OBJECTS) $(FLEXLIB) scan.o
-	$(CC) $(CFLAGS) link to $(FLEX) $(LDFLAGS) $(OBJECTS) scan.o $(FLEXLIB) $(LIBS)
-
-bootflex: $(OBJECTS) $(FLEXLIB) initscan.o
-	$(CC) $(CFLAGS) link to $(FLEX) $(LDFLAGS) $(OBJECTS) initscan.o $(FLEXLIB) $(LIBS)
-
-parse.c: ansiparse.y
-	$(YACC) -d ansiparse.y
-	$(SED) "/extern char.*malloc/d" <y.tab.c >parse.tmp
-	copy parse.tmp parse.c
-	copy y.tab.h parse.h
-	@delete y.tab.c y.tab.h parse.tmp
-ansiparse.y: $(srcdir)/parse.y parse.ych
-	$(WMERGE) $(srcdir)/parse.y parse.ych ansiparse.y
-
-parse.h: parse.c
-
-scan.c: scan.l
-	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) $(srcdir)/scan.l >scan.tmp
-	$(SED) s,\"$(srcdir)/scan.l\",\"scan.l\", <scan.tmp >scan.c
-	@delete scan.tmp
-
-scan.o: scan.c parse.h flexdef.h config.h
-initscan.o: initscan.c parse.h flexdef.h config.h
-yylex.o: yylex.c parse.h flexdef.h config.h
-
-skel.c: flex.skl mkskel.sh
-	$(SHELL) $(srcdir)/mkskel.sh $(srcdir)/flex.skl >skel.c
-
-main.o: main.c flexdef.h config.h version.h
-ccl.o: ccl.c flexdef.h config.h
-dfa.o: dfa.c flexdef.h config.h
-ecs.o: ecs.c flexdef.h config.h
-gen.o: gen.c flexdef.h config.h
-misc.o: misc.c flexdef.h config.h
-nfa.o: nfa.c flexdef.h config.h
-parse.o: parse.c flexdef.h config.h
-skel.o: skel.c flexdef.h config.h
-sym.o: sym.c flexdef.h config.h
-tblcmp.o: tblcmp.c flexdef.h config.h
-
-alloca.o: alloca.c
-	$(CC) $(CPPFLAGS) $(CFLAGS) define=xmalloc=yy_flex_xmalloc alloca.c
-
-alloca.c: $(srcdir)/MISC/alloca.c
-	@delete alloca.c
-	copy $(srcdir)/MISC/alloca.c .
-
-test: check
-check: flex
-	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) $(srcdir)/scan.l > temp_a
-	$(SED) s,"$(srcdir)/scan.l","scan.l", < temp_a > temp_b
-	-diff scan.c temp_b -l10000 -w
-	@delete temp_?
-	@echo "Check successful, using COMPRESSION='$(COMPRESSION)'"
-
-bigcheck:
-	delete scan.c
-	$(MAKE) COMPRESSION=-C check
-	delete scan.c
-	$(MAKE) COMPRESSION=-Ce check
-	delete scan.c
-	$(MAKE) COMPRESSION=-Cm check
-	delete scan.c
-	$(MAKE) COMPRESSION=-Cfea check
-	delete scan.c
-	$(MAKE) COMPRESSION=-CFer check
-	delete scan.c
-	$(MAKE) COMPRESSION=-l PERF_REPORT= check
-	delete scan.c
-	$(MAKE)
-	@echo "All checks successful"
-
-$(FLEXLIB): $(LIBOBJS)
-	$(AR) $(FLEXLIB) R $(LIBOBJS)
-
-$(FLEX).man: flex.1 # SMAKE can't `cd', sorry.  And, I don't have nroff.
-#	cd $(srcdir), nroff -man flex.1 >$(FLEX).man
-
-install: $(FLEX) $(FLEXLIB)
-	$(INSTALL_PROGRAM) $(FLEX) $(bindir)/$(FLEX)
-#	@delete $(bindir)/$(FLEX)++
-	$(INSTALL_DATA) $(FLEXLIB) $(libdir)/libfl.lib
-	$(INSTALL_DATA) $(srcdir)/FlexLexer.h $(includedir)/FlexLexer.h
-
-ansilibmain.o: ansilibmain.c
-ansilibmain.c: libmain.c libmain.ch
-	$(WMERGE) libmain.c libmain.ch ansilibmain.c
-ansilibyywrap.o: ansilibyywrap.c
-ansilibyywrap.c: libyywrap.c libyywrap.ch
-	$(WMERGE) libyywrap.c libyywrap.ch ansilibyywrap.c
-
-clean:
-	-delete parse.(c|h) ansi\#? \#?.(bak|o|lnk) \
-	alloca.c lex.yy.(c|cc) $(FLEXLIB)
-
-veryclean: clean
-	-delete $(FLEX) scan.c
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/config.h b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/config.h
deleted file mode 100644
index 1c02a3c..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/config.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* $Header: /home/daffy/u0/vern/flex/RCS/conf.in,v 1.2 95/01/09 12:11:51 vern Exp $ */
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-#undef size_t
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS 1
-
-/* Define if you have the <malloc.h> header file.  */
-#undef HAVE_MALLOC_H
-
-/* Define if you have the <string.h> header file.  */
-#define HAVE_STRING_H 1
-
-/* Define if you have the <sys/types.h> header file.  */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-#undef HAVE_ALLOCA_H
-
-/* Define if platform-specific command line handling is necessary.  */
-#undef NEED_ARGV_FIXUP
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libmain.ch b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libmain.ch
deleted file mode 100644
index e0f5b40..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libmain.ch
+++ /dev/null
@@ -1,8 +0,0 @@
-Changes for LIBMAIN.C 2.4.7 by Andreas Scherer, January 19, 1995.
-Modified for LIBMAIN.C 2.5.1, April 3, 1995.
-
-@x l.5
-extern int yylex();
-@y
-extern int yylex(void);
-@z
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libyywrap.ch b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libyywrap.ch
deleted file mode 100644
index b2d6a3f..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/libyywrap.ch
+++ /dev/null
@@ -1,8 +0,0 @@
-Changes for LIBYYWRAP.C 2.4.7 by Andreas Scherer, January 19, 1995.
-Modified for LIBYYWRAP.C 2.5.1, April 3, 1995.
-
-@x l.5
-int yywrap()
-@y
-int yywrap(void)
-@z
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/parse.ych b/WebKitTools/android/flex-2.5.4a/MISC/Amiga/parse.ych
deleted file mode 100644
index 5671a5b..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Amiga/parse.ych
+++ /dev/null
@@ -1,8 +0,0 @@
-Changes for PARSE.Y 2.4.7 by Andreas Scherer, January 20, 1995.
-Modified for PARSE.Y 2.5.1, April 3, 1995.
-
-@x l.60
-char *alloca ();
-@y
-char *alloca(unsigned int);
-@z
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Atari/Atari.patches b/WebKitTools/android/flex-2.5.4a/MISC/Atari/Atari.patches
deleted file mode 100644
index dc04263..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Atari/Atari.patches
+++ /dev/null
@@ -1,911 +0,0 @@
-(Message inbox:32)
-Date:          Mon, 03 Jul 89 21:15:32 CET
-From:  V61%DHDURZ1.BITNET@lbl.gov
-Subject:       Flex, bug fix, improvments, patches for Minix & TOS
-To:  vern@lbl-csam.arpa
-
-At first I have to thank you for your wonderful program. I had ported the
-old version to OS9,TOS (Atari ST) and Minix and the new version 2.1 Beta
-to Minix and TOS.
-     
-While porting and using flex I detected a bug and made some improvements.
-I have included a  shared, compressed and uuencoded file contaning all cdiffs
-and additional files (Sorry, but I'm on EBCDIC-Bitnet) and a short discussion
-of the changes. Even some of the TOS specific changes might be of general
-interest !
-     
-I posted these cdiffs to the minix discussion group, but I think it's up
-to you to post them to the unix-sources group. If you plan to post even
-the TOS compiler specific patches please contact me because there might be
-further compiler (P.D.) additions. If you have an interest I could also
-port the new version to OS9 -- this is a little bit more difficult, because
-OS9 uses CR as end of line character (the EOL char. is coded into the
-initscan.c tables,...). It is necessary to change all occurences of '\n' to
-macros and variables and it's useful to add a new -n options (see commented
-line in main.c)
-     
-     
-     
-The changes:                                                  (1.7.89 RAL)
-     
- - Bug fix: The original flex didn't like trailing spaces in exclusive start
-     condition lists ! If you add an trailing space to line 68 in scan.l
-     
-     "%x SECT2 SECT2PROLOG SECT3 CODEBLOCK PICKUPDEF SC CARETISBOL NUM QUOTE "
-     
-     you get a misleading error message:
-     
-     "Syntax error at line 69: bad start condition list"
-     
-     This bug can either be fixed in parse.y or in scan.l . I have chosen the
-     last because there the fix is minimal: Just change the rule (line 128)
-     
-      "\n"    to   "{OPTWS}\n"
-     
- - Enhancements:
-    - new option "-?" that provides some help information about the other
-      flags (main.c)
-    - new option "-aTMPPATH" that allows a redefinition of the standard
-      path for the temporary file (this might be rather large >200k if
-      F,f options are selected). (main.c, flexdef.h (l.376))
-    - hexdump of illegal characters -- this proved to be a useful debugging
-      tool especialy if invisible control characters occur which weren't
-      covered by the rules. (scan.l  fprintf statement line 129,...)
-     
- - Patches due to TOS
-    - General: TOS uses CR,LF as end of line char., Flex wants only a single
-      LF as EOL char. Therefore all I/O must be translated using f* calls.
-      This is done everywhere besides the YY_INPUT macro (flex.skel (scan.c),
-      line 31) that uses a low level 'read'. This should be definitly changed
-      to fread, so that all I/O calls occur on the same level.
-    - the short action_file_name has been "flexXXXXXX.tmp", but that's too
-      much for TOS,MSDOS ! I changed it to "flexXXXX.tmp" in main.c (patch
-      covered by the -a option additions)
-    - some compilers don't like external names that are ambiguous within
-      the first 8 characters. I defined macros that change all these long
-      external names to names that are unique within the first 8 characters.
-      Just define SHORT_EXTERNAL_NAMES to use this feature (flexdef.h)
-    - some statement changes that some compiler don't like:
-      typedef *xxx[]  -> typedef **xxx       (flexdef.h.,l.308)
-      "/*" -> '/','*' within a comment in (scan.l, l.209)
-    - changed short "lexyy.c" to "lex_yy.c" what's more similar to the unix
-      "lex.yy.c" (main.c).
-    - a few further really compiler dependent changes provided with
-      #ifdef ATARI && LATTICE res. TURBO braces.
-     
- - Additional TOS only files
-    - Makefile.tos: Common makefile for all TOS compilers. If you add further
-      ones please email me the new makefile.
-    - flex.lnk: Lattice - GST linker argument extension file
-    - flex.tlk: Turbo linker argument extension file
-     
-     
-Additional remarks:
-     
-I didn't add a new initscan.c (= flex -ist scan.l). The current one is good
-enough for a first compilation. With this first version of flex you can
-rebuild your own scan.c and the final flex version !
-     
-Minix ST :
-  - I had to "chmem =70000 cv" (>50000) to get flex linked
-  - 'memset' (PC 1.3, EFTH40,...) is necessary
-  - chmem =90000 flex may be sufficient
-     
-Minix PC :
-  It should be possible to port Flex to Minix PC. The current sizes of flex
-  are:
-                        Minix ST (ACK)    Lattice (TOS)    Turbo (TOS)
-     
-       size               75300             83305             57957
-       compilation time      22'               15'             3'40"
-       flex -is scan.l     1'49"               43"               30"
-     
-  The Minix ST size includes the bad generated code using only a subset of
-  the 68000 commands, long addresses only and a huge relocation table.
-  Therefore the PC size will be <64 k ! More serious is the fact that I had
-  to chmem =90000 flex to get scan.l converted to scan.c . But I never saw
-  a more complex lex source than scan.l -- so it should be possible to
-  reduce some array sizes without limitation for all day usage.
-     
-  No one volunteered yet for a Minix PC port -- but if someone will try it
-  I would provide him with a new scan.c and some hints.
-     
-TOS:
-  Don't forget to adapt the flexskel path within flexdef.h !
-     
-     
-Bitnet:  V61@DHDURZ1                               Ronald Lamprecht
-UUCP:    ...!unido!DHDURZ1.bitnet!V61              Theoretische Physik
-ARPAnet: V61%DHDURZ1.BITNET@CUNYVM.CUNY.EDU       (Heidelberg, West Germany)
-(Message inbox:36)
-Date:          Wed, 05 Jul 89 21:16:07 CET
-From:  V61%DHDURZ1.BITNET@csa2.lbl.gov
-Subject:       Re: What is TOS
-To:  vern@lbl-csam.arpa
-
-TOS is the name of the Atari ST operating system that is very similar
-to MSDOS (Both use CR,LF as end of line character). Therefore I have
-been astonished that no EOL convertion porblems occur within MSDOS.
-     
-I have been aware of the double buffering when changing read to fread and  I
-accept your argument of a possible slow down. But if you integrate the other
-Atari - TOS changes, please insert a
-        #ifdef ATARI
-              fread ....
-        #else
-              read  ....
-        #endif
-in flex.skel .
-     
-Bitnet:  V61@DHDURZ1                               Ronald Lamprecht
-UUCP:    ...!unido!DHDURZ1.bitnet!V61              Theoretische Physik
-ARPAnet: V61%DHDURZ1.BITNET@CUNYVM.CUNY.EDU       (Heidelberg, West Germany)
-
-
-
-
-echo x - Makefile_cdiff
-sed '/^X/s///' > Makefile_cdiff << '/'
-X*** Src_2.1/Makefile	Thu Jun 28 00:06:42 1989
-X--- Makefile	Thu Jul  3 02:12:48 1989
-X***************
-X*** 5,10 ****
-X--- 5,11 ----
-X  # Porting considerations:
-X  #
-X  #    For System V Unix machines, add -DSYS_V to CFLAGS.
-X+ #    For Minix (ST), add -DSYS_V to CFLAGS
-X  #    For Vax/VMS, add -DSYS_V to CFLAGS.
-X  #    For MS-DOS, add "-DMS_DOS -DSYS_V" to CFLAGS.  Create \tmp if not present.
-X  #         You will also want to rename flex.skel to something with a three
-X***************
-X*** 21,28 ****
-X  SKELETON_DIR = /usr/local/lib
-X  SKELETON_FILE = flex.skel
-X  SKELFLAGS = -DDEFAULT_SKELETON_FILE=\"$(SKELETON_DIR)/$(SKELETON_FILE)\"
-X! CFLAGS = -O
-X! LDFLAGS = -s
-X  
-X  FLEX_FLAGS =
-X  FLEX = ./flex
-X--- 22,29 ----
-X  SKELETON_DIR = /usr/local/lib
-X  SKELETON_FILE = flex.skel
-X  SKELFLAGS = -DDEFAULT_SKELETON_FILE=\"$(SKELETON_DIR)/$(SKELETON_FILE)\"
-X! CFLAGS = -O -DSYS_V
-X! LDFLAGS = 
-X  
-X  FLEX_FLAGS =
-X  FLEX = ./flex
-X***************
-X*** 57,63 ****
-X  	yylex.c
-X  
-X  flex : $(FLEXOBJS)
-X! 	$(CC) $(CFLAGS) -o flex $(LDFLAGS) $(FLEXOBJS)
-X  
-X  first_flex:
-X  	cp initscan.c scan.c
-X--- 58,65 ----
-X  	yylex.c
-X  
-X  flex : $(FLEXOBJS)
-X! 	$(CC) $(CFLAGS) -o flex $(FLEXOBJS) $(LDFLAGS)
-X! 	chmem =150000 flex
-X  
-X  first_flex:
-X  	cp initscan.c scan.c
-/
-echo x - flex.skel_cdif
-sed '/^X/s///' > flex.skel_cdif << '/'
-X*** Src_2.1/flex.skel	Thu Jun 28 00:19:20 1989
-X--- flex.skel	Thu Jul  2 22:18:31 1989
-X***************
-X*** 28,34 ****
-X   * is returned in "result".
-X   */
-X  #define YY_INPUT(buf,result,max_size) \
-X! 	if ( (result = read( fileno(yyin), buf, max_size )) < 0 ) \
-X  	    YY_FATAL_ERROR( "read() in flex scanner failed" );
-X  #define YY_NULL 0
-X  #define yyterminate() return ( YY_NULL )
-X--- 28,34 ----
-X   * is returned in "result".
-X   */
-X  #define YY_INPUT(buf,result,max_size) \
-X! 	if ( (result = fread( buf,1, max_size, yyin )) < 0 ) \
-X  	    YY_FATAL_ERROR( "read() in flex scanner failed" );
-X  #define YY_NULL 0
-X  #define yyterminate() return ( YY_NULL )
-/
-echo x - flexdef.h_cdif
-sed '/^X/s///' > flexdef.h_cdif << '/'
-X*** Src_2.1/flexdef.h	Thu Jun 28 00:43:27 1989
-X--- flexdef.h	Thu Jul  3 02:45:50 1989
-X***************
-X*** 26,31 ****
-X--- 26,40 ----
-X  
-X  /* @(#) $Header: flexdef.h,v 2.0 89/06/20 15:49:50 vern Locked $ (LBL) */
-X  
-X+ #ifdef ATARI
-X+ #define SYS_V
-X+ #define abs(x) ((x) < 0 ? -(x) : (x))
-X+ #define SHORT_FILE_NAMES
-X+ #ifdef TURBO
-X+ #define SHORT_EXTERNAL_NAMES
-X+ #endif
-X+ #endif
-X+ 
-X  #ifndef FILE
-X  #include <stdio.h>
-X  #endif
-X***************
-X*** 41,47 ****
-X  #endif
-X  
-X  #ifndef VMS
-X! char *memset();
-X  #else
-X  /* memset is needed for old versions of the VMS C runtime library */
-X  #define memset(s, c, n) \
-X--- 50,58 ----
-X  #endif
-X  
-X  #ifndef VMS
-X! #ifndef ATARI && TURBO
-X! char *memset();
-X! #endif
-X  #else
-X  /* memset is needed for old versions of the VMS C runtime library */
-X  #define memset(s, c, n) \
-X***************
-X*** 81,91 ****
-X--- 92,129 ----
-X  #define true 1
-X  #define false 0
-X  
-X+ #ifdef ATARI
-X+ #define DEFAULT_SKELETON_FILE "D:\\include\\flexskel"
-X+ #endif
-X+ 
-X  
-X  #ifndef DEFAULT_SKELETON_FILE
-X  #define DEFAULT_SKELETON_FILE "flex.skel"
-X  #endif
-X  
-X+ #ifdef SHORT_EXTERNAL_NAMES
-X+ /* avoid long external names that are ambiguous within the first 8 characters */
-X+ #define current_mns                 c__mns
-X+ #define current_max_rules           c__max_rules
-X+ #define current_max_state_type      c__max_state_type
-X+ #define current_max_scs             c__max_scs
-X+ #define current_max_dfa_size        c__max__size
-X+ #define current_max_xpairs          c__max_xpairs
-X+ #define current_max_template_xpairs c__max_template_xpairs
-X+ #define current_max_dfas            c__max_dfas
-X+ #define current_maxccls             c__maxccles
-X+ #define current_max_ccl_tbl_size    c__max_ccl_tbl_size
-X+ #define indent_puts                 ind_puts
-X+ #define indent_put2s                ind_put2s
-X+ #define gen_next_compressed_state   gen_n_comressed_state
-X+ #define gen_next_match              gen_n_match
-X+ #define gen_next_state              gen_n_state
-X+ #define variable_trailing_context_rules  var_tr_context_rules
-X+ #define variable_trailing_rule           var_tr_rule
-X+ #define backtrack_report            backtr_report
-X+ #define backtrack_file              backtr_file
-X+ #endif
-X+ 
-X  /* special chk[] values marking the slots taking by end-of-buffer and action
-X   * numbers
-X   */
-X***************
-X*** 305,311 ****
-X      int int_val;
-X      } ;
-X  
-X! typedef struct hash_entry *hash_table[];
-X  
-X  #define NAME_TABLE_HASH_SIZE 101
-X  #define START_COND_HASH_SIZE 101
-X--- 343,349 ----
-X      int int_val;
-X      } ;
-X  
-X! typedef struct hash_entry **hash_table;
-X  
-X  #define NAME_TABLE_HASH_SIZE 101
-X  #define START_COND_HASH_SIZE 101
-X***************
-X*** 372,378 ****
-X  extern int datapos, dataline, linenum;
-X  extern FILE *skelfile, *yyin, *temp_action_file, *backtrack_file;
-X  extern char *infilename;
-X! extern char action_file_name[];
-X  
-X  
-X  /* variables for stack of states having only one out-transition:
-X--- 410,416 ----
-X  extern int datapos, dataline, linenum;
-X  extern FILE *skelfile, *yyin, *temp_action_file, *backtrack_file;
-X  extern char *infilename;
-X! extern char *action_file_name;
-X  
-X  
-X  /* variables for stack of states having only one out-transition:
-/
-echo x - main.c_cdiff
-sed '/^X/s///' > main.c_cdiff << '/'
-X*** Src_2.1/main.c	Thu Jun 28 00:30:39 1989
-X--- main.c	Thu Jul  3 02:27:47 1989
-X***************
-X*** 81,96 ****
-X  FILE *temp_action_file;
-X  FILE *backtrack_file;
-X  int end_of_buffer_state;
-X! #ifndef SHORT_FILE_NAMES
-X! char action_file_name[] = "/tmp/flexXXXXXX";
-X! #else
-X! char action_file_name[] = "flexXXXXXX.tmp";
-X! #endif
-X! 
-X  #ifndef SHORT_FILE_NAMES
-X  static char outfile[] = "lex.yy.c";
-X  #else
-X! static char outfile[] = "lexyy.c";
-X  #endif
-X  static int outfile_created = 0;
-X  
-X--- 81,91 ----
-X  FILE *temp_action_file;
-X  FILE *backtrack_file;
-X  int end_of_buffer_state;
-X! char *action_file_name;
-X  #ifndef SHORT_FILE_NAMES
-X  static char outfile[] = "lex.yy.c";
-X  #else
-X! static char outfile[] = "lex_yy.c";
-X  #endif
-X  static int outfile_created = 0;
-X  
-X***************
-X*** 328,333 ****
-X--- 323,329 ----
-X      {
-X      int i, sawcmpflag, use_stdout;
-X      char *arg, *skelname = NULL, *flex_gettime(), clower(), *mktemp();
-X+     char *tmp_action =(char *)0, *malloc();
-X  
-X      printstats = syntaxerror = trace = spprdflt = interactive = caseins = false;
-X      backtrack_report = performance_report = ddebug = fulltbl = fullspd = false;
-X***************
-X*** 349,354 ****
-X--- 345,355 ----
-X  	for ( i = 1; arg[i] != '\0'; ++i )
-X  	    switch ( arg[i] )
-X  		{
-X+ 		case 'a':
-X+ 		    if ( i != 1 )
-X+ 			flexerror( "-a flag must be given separately" );
-X+ 		    tmp_action = &arg[i+1];
-X+ 		    goto get_next_arg;
-X  		case 'b':
-X  		    backtrack_report = true;
-X  		    break;
-X***************
-X*** 445,452 ****
-X  		    printstats = true;
-X  		    break;
-X  
-X! 		default:
-X! 		    lerrif( "unknown flag %c", (int) arg[i] );
-X  		    break;
-X  		}
-X  
-X--- 446,458 ----
-X  		    printstats = true;
-X  		    break;
-X  
-X! 		case '?':
-X! 		    flexinfo(0);
-X! 		    break;
-X! 
-X! 		default:
-X! 		    fprintf(stderr,"flex : unknown flag %c\n", (int) arg[i] );
-X! 		    flexinfo(1);
-X  		    break;
-X  		}
-X  
-X***************
-X*** 454,459 ****
-X--- 460,493 ----
-X  	;
-X  	}
-X  
-X+ 
-X+ /* if you change the default tmp file names don't forget to change the
-X+    initialization for i, too !
-X+    
-X+ */
-X+ #ifndef SHORT_FILE_NAMES
-X+     i = 10;
-X+     if (!tmp_action) i += 5;
-X+ #else
-X+     i = 12;
-X+ #endif
-X+     if (tmp_action) 
-X+         i += strlen(tmp_action) + 1;
-X+     if((action_file_name = malloc(i+1)) == (char *)0)
-X+         flexerror("No memory for action_file_name");
-X+     *action_file_name = (char) NULL;
-X+     if (tmp_action) 
-X+         strcat(action_file_name,tmp_action);
-X+ #ifndef SHORT_FILE_NAMES
-X+     else
-X+         strcat(action_file_name,"/tmp");
-X+     strcat(action_file_name,"/flexXXXXXX");
-X+ #else
-X+     if (tmp_action)
-X+         strcat(action_file_name,"/");
-X+     strcat(action_file_name,"flexXXXX.tmp");
-X+ #endif
-X+     
-X      if ( (fulltbl || fullspd) && usemecs )
-X  	flexerror( "full table and -cm don't make sense together" );
-X  
-X***************
-X*** 520,526 ****
-X      if ( (skelfile = fopen( skelname, "r" )) == NULL )
-X  	lerrsf( "can't open skeleton file %s", skelname );
-X  
-X!     (void) mktemp( action_file_name );
-X  
-X      if ( (temp_action_file = fopen( action_file_name, "w" )) == NULL )
-X  	lerrsf( "can't open temporary action file %s", action_file_name );
-X--- 554,562 ----
-X      if ( (skelfile = fopen( skelname, "r" )) == NULL )
-X  	lerrsf( "can't open skeleton file %s", skelname );
-X  
-X! #ifndef ATARI && LATTICE
-X!     (void) mktemp( action_file_name );
-X! #endif
-X  
-X      if ( (temp_action_file = fopen( action_file_name, "w" )) == NULL )
-X  	lerrsf( "can't open temporary action file %s", action_file_name );
-X***************
-X*** 566,571 ****
-X--- 602,640 ----
-X      }
-X  
-X  
-X+ flexinfo(status)
-X+ int status;
-X+ {
-X+    fprintf(stderr,"Syntax  :  FLEX  inp_file\n");
-X+    fprintf(stderr,"Function: fast lexical analyzer generator  V%s\n",flex_version);
-X+    fprintf(stderr,"Options : a dir_path  : directory path for temporary files\n");
-X+    fprintf(stderr,"	- b  : generate backtracking information to lex.backtrack\n");
-X+    fprintf(stderr,"	- c  : compressed table, no equiv., no meta equiv.classes\n");
-X+    fprintf(stderr,"	   e : equivalence classes\n");
-X+    fprintf(stderr,"	   F : fast table\n");
-X+    fprintf(stderr,"	  |f : full table\n");
-X+    fprintf(stderr,"	  |m : meta equivalence classes\n");
-X+    fprintf(stderr,"	- d  : generate debugging scanner\n");
-X+    fprintf(stderr,"	- F  : fast table\n");
-X+    fprintf(stderr,"	- f  : full (not compressed) table\n");
-X+    fprintf(stderr,"	- I  : generate interactive scanner\n");
-X+    fprintf(stderr,"	- i  : generate case-insensitive scanner\n");
-X+    fprintf(stderr,"	- L  : supress #line directives\n");
-X+ /*   fprintf(stderr,"	- n hexnum : generate scanner using <hexnum> as newline char.\n");*/
-X+    fprintf(stderr,"	- p  : generate performance report to stderr\n");
-X+    fprintf(stderr,"	- S skeleton_path : file path for skeleton file\n");
-X+    fprintf(stderr,"	- s  : suppress echo of unmatched scanner input to stdout\n");
-X+    fprintf(stderr,"	- T  : run flex in trace mode\n");
-X+ #ifdef ATARI
-X+    fprintf(stderr,"	- t  : place result on stdout instead of lex_yy.c\n");
-X+ #else
-X+    fprintf(stderr,"	- t  : place result on stdout instead of lex.yy.c\n");
-X+ #endif
-X+    fprintf(stderr,"	- v  : print statistics of generated scanner\n");
-X+    fprintf(stderr,"     default =  -cem\n");
-X+    exit(status);
-X+ }
-X+ 
-X  /* readin - read in the rules section of the input file(s)
-X   *
-X   * synopsis
-/
-echo x - scan.l_cdiff
-sed '/^X/s///' > scan.l_cdiff << '/'
-X*** Src_2.1/scan.l	Thu Jun 30 19:42:00 1989
-X--- scan.l	Thu Jul  2 22:19:26 1989
-X***************
-X*** 125,132 ****
-X  
-X  {SCNAME}		RETURNNAME;
-X  ^{OPTWS}\n		++linenum; /* allows blank lines in section 1 */
-X! \n			++linenum; return ( '\n' );
-X! .			synerr( "illegal character" ); BEGIN(RECOVER);
-X  
-X  
-X  <C_COMMENT>"*/"		ECHO; BEGIN(0);
-X--- 125,136 ----
-X  
-X  {SCNAME}		RETURNNAME;
-X  ^{OPTWS}\n		++linenum; /* allows blank lines in section 1 */
-X! {OPTWS}\n		++linenum; return ( '\n' );
-X! .			{
-X! 			synerr( "illegal character" );
-X! 			fprintf(stderr,"Char : $%x\n",yytext[yyleng-1]);
-X! 			BEGIN(RECOVER);
-X! 			}
-X  
-X  
-X  <C_COMMENT>"*/"		ECHO; BEGIN(0);
-X***************
-X*** 206,212 ****
-X  <SECT2>^{OPTWS}\n	++linenum; /* allow blank lines in section 2 */
-X  
-X  	/* this horrible mess of a rule matches indented lines which
-X! 	 * do not contain "/*".  We need to make the distinction because
-X  	 * otherwise this rule will be taken instead of the rule which
-X  	 * matches the beginning of comments like this one
-X  	 */
-X--- 210,216 ----
-X  <SECT2>^{OPTWS}\n	++linenum; /* allow blank lines in section 2 */
-X  
-X  	/* this horrible mess of a rule matches indented lines which
-X! 	 * do not contain '/','*'.  We need to make the distinction because
-X  	 * otherwise this rule will be taken instead of the rule which
-X  	 * matches the beginning of comments like this one
-X  	 */
-/
-echo x - Makefile.tos
-sed '/^X/s///' > Makefile.tos << '/'
-X# make file for "flex" tool
-X
-X# @(#) $Header: Makefile,v 2.3 89/06/20 17:27:12 vern Exp $ (LBL)
-X
-X# Porting considerations:
-X#
-X#    For System V Unix machines, add -DSYS_V to CFLAGS.
-X#    For Vax/VMS, add -DSYS_V to CFLAGS.
-X#    For MS-DOS, add "-DMS_DOS -DSYS_V" to CFLAGS.  Create \tmp if not present.
-X#         You will also want to rename flex.skel to something with a three
-X#         character extension, change SKELETON_FILE below appropriately,
-X#    For Amiga, add "-DAMIGA -DSYS_V" to CFLAGS.
-X#
-X# A long time ago, flex was successfully built using Microsoft C and
-X# the following options: /AL, /stack:10000, -LARGE, -Ml, -Mt128, -DSYS_V
-X
-X
-X# the first time around use "make first_flex"
-X
-X# The following definitions must be set according to your compiler -
-X# examples for a Lattice Compiler with GST assembler and TURBO C with
-X# assembler are provided below and must just be updated (don't forget to
-X# update the linker argument extension files (*.lnk,*.tlk), too) :
-X#
-X#CCPATH  = path to compiler directory without trailing \
-X#CHPATH  = path to header files without trailing \
-X#CC      = filename of the compiler
-X#CFLAGS  = compiler option flags
-X#CIEXT   = extension of C sources that should be used for input filenames
-X#ASMPATH = path to assembler directory without trailing \
-X#ASM     = filename of the assembler
-X#AFLAGS  = assembler option flags
-X#AIEXT   = extension of assembler sources that should be used for assembler
-X#          input filenames
-X#AEXT    = general assembler filename extension
-X#LNKPATH = path to linker directory without trailing \
-X#LINK    = filename of the linker
-X#LFLAG0  = first option (full pathname of C startupcode) 
-X#LFLAG1  = further options + option flag for argument extension filename
-X#LFLAG2  = further options + option flag for output-filename 
-X#LNKEXT  = extension of linker argument extension file
-X#OIEXT   = extension of objects that should be used for linker input files
-X#OEXT    = general object file extension
-X
-X# Lattice definitions
-XCCPATH  = d:\latt
-XCHPATH  = d:\latt\include
-XCC      = lc.ttp
-XCFLAGS  = -h -n -cw -cc -i$(CHPATH)\ -g$(CCPATH)\ -dLATTICE -dATARI
-XCIEXT   =
-XASMPATH = d:\gst
-XASM     = assem.ttp
-XAFLAGS  = -nolist -errors errors.out
-XAIEXT   =
-XAEXT    = .asm
-XLNKPATH = d:\gst
-XLINK    = ld.ttp
-XLFLAG0  =
-XLFLAG1  = -with 
-XLFLAG2  = -nolist -sec -mem 200 -prog 
-XLNKEXT  = .lnk
-XOIEXT   =
-XOEXT    = .bin
-X
-X# Turbo definitions
-X#CCPATH  = d:\turbo
-X#CHPATH  = d:\turbo\include
-X#CC      = tcc.prg
-X#CFLAGS  = -GJMPRZ -H=$(CHPATH)\ -w- -DTURBO -DATARI
-X#CIEXT   = .c
-X#ASMPATH = d:\turbo
-X#ASM     = mas.prg
-X#AFLAGS  =
-X#AIEXT   = .s
-X#AEXT    = .s
-X#LNKPATH = d:\turbo
-X#LINK    = tlink.ttp
-X#LFLAG0  = $(LNKPATH)\lib\tcstart.o
-X#LFLAG1  = -I=
-X#LFLAG2  = -O=
-X#LNKEXT  = .tlk
-X#OIEXT   = .o
-X#OEXT    = .o
-X
-X# Other definitions
-X# (not used for Atari because of short argument string - defined in flexdef.h
-X
-XSKELETON_DIR = /usr/lib
-XSKELETON_FILE = flex.skel
-XSKELFLAGS = -DDEFAULT_SKELETON_FILE=\"$(SKELETON_DIR)/$(SKELETON_FILE)\"
-X
-X
-XFLEX       = d:\etc\flex.ttp
-XFLEX_FLAGS = -is
-XYACC       = d:\etc\yacc.ttp
-XRENAME     = d:\bin\rename
-XDEL        = d:\bin\del
-X
-X# Internal definitions
-XLNK     = $(LNKPATH)\$(LINK)
-X
-XFLEXOBJS = \
-X	ccl$(OEXT) \
-X	dfa$(OEXT) \
-X	ecs$(OEXT) \
-X	gen$(OEXT) \
-X	main$(OEXT) \
-X	misc$(OEXT) \
-X	nfa$(OEXT) \
-X	parse$(OEXT) \
-X	scan$(OEXT) \
-X	sym$(OEXT) \
-X	tblcmp$(OEXT) \
-X	yylex$(OEXT)
-X
-XFLEX_C_SOURCES = \
-X	ccl.c \
-X	dfa.c \
-X	ecs.c \
-X	gen.c \
-X	main.c \
-X	misc.c \
-X	nfa.c \
-X	parse.c \
-X	scan.c \
-X	sym.c \
-X	tblcmp.c \
-X	yylex.c
-X
-Xflex : $(FLEXOBJS)
-X	 $(LNK) $(LFLAG0) $(LFLAG1)flex$(LNKEXT) $(LFLAG2)flex.ttp
-X
-Xfirst_flex:
-X	cp initscan.c scan.c
-X	make $(MFLAGS) flex
-X
-Xparse.h parse.c : parse.y
-X	$(YACC)   -d parse.y
-X	$(DEL)    parse.c
-X	$(RENAME) y_tab.c parse.c
-X	$(DEL)    parse.h
-X	$(RENAME) y_tab.h parse.h
-X
-Xscan.c : scan.l
-X	$(FLEX)   $(FLEX_FLAGS) scan.l
-X	$(RENAME) lex_yy.c scan.c
-X
-Xscan$(OEXT) : scan.c parse.h flexdef.h
-X	 $(CCPATH)\$(CC) $(CFLAGS) scan$(CIEXT)
-X
-Xmain$(OEXT) : main.c flexdef.h
-X	 $(CCPATH)\$(CC) $(CFLAGS)  main$(CIEXT)
-X
-Xccl$(OEXT) : ccl.c flexdef.h 
-X	 $(CCPATH)\$(CC) $(CFLAGS)  ccl$(CIEXT)
-X
-Xdfa$(OEXT) : dfa.c flexdef.h
-X	 $(CCPATH)\$(CC) $(CFLAGS)  dfa$(CIEXT)
-X
-Xecs$(OEXT) : ecs.c flexdef.h
-X	 $(CCPATH)\$(CC) $(CFLAGS)  ecs$(CIEXT)
-X
-Xgen$(OEXT) : gen.c flexdef.h
-X	 $(CCPATH)\$(CC) $(CFLAGS)  gen$(CIEXT)
-X
-Xmisc$(OEXT) : misc.c flexdef.h
-X	 $(CCPATH)\$(CC) $(CFLAGS)  misc$(CIEXT)
-X
-Xnfa$(OEXT) : nfa.c flexdef.h
-X	 $(CCPATH)\$(CC) $(CFLAGS)  nfa$(CIEXT)
-X
-Xparse$(OEXT) : parse.c flexdef.h
-X	 $(CCPATH)\$(CC) $(CFLAGS)  parse$(CIEXT)
-X
-Xsym$(OEXT) : sym.c flexdef.h
-X	 $(CCPATH)\$(CC) $(CFLAGS)  sym$(CIEXT)
-X
-Xtblcmp$(OEXT) : tblcmp.c flexdef.h
-X	 $(CCPATH)\$(CC) $(CFLAGS)  tblcmp$(CIEXT)
-X
-Xyylex$(OEXT) : yylex.c flexdef.h 
-X	 $(CCPATH)\$(CC) $(CFLAGS)  yylex$(CIEXT)
-X
-Xflex.man : flex.1
-X	nroff -man flex.1 >flex.man
-X
-Xlint : $(FLEX_C_SOURCES)
-X	lint $(FLEX_C_SOURCES) > flex.lint
-X
-Xdistrib :
-X	mv scan.c initscan.c
-X	chmod 444 initscan.c
-X	$(MAKE) $(MFLAGS) clean
-X
-Xclean :
-X	rm -f core errs flex *$(OEXT) parse.c *.lint parse.h flex.man tags
-X
-Xtags :
-X	ctags $(FLEX_C_SOURCES)
-X
-Xvms :	flex.man
-X	$(MAKE) $(MFLAGS) distrib
-X
-Xtest :
-X	$(FLEX) $(FLEX_FLAGS) scan.l
-X	$(RENAME) lex_yy.c scan.ctest
-X	cmp scan.c scan.ctest
-X
-/
-echo x - Readme2
-sed '/^X/s///' > Readme2 << '/'
-XThe changes:                                                  (1.7.89 RAL)
-X
-X - Bug fix: The original flex didn't like trailing spaces in exclusive start
-X     condition lists ! If you add an trailing space to line 68 in scan.l
-X     
-X     "%x SECT2 SECT2PROLOG SECT3 CODEBLOCK PICKUPDEF SC CARETISBOL NUM QUOTE "
-X     
-X     you get a misleading error message: 
-X     
-X     "Syntax error at line 69: bad start condition list"
-X     
-X     This bug can either be fixed in parse.y or in scan.l . I have chosen the
-X     last because there the fix is minimal: Just change the rule (line 128)
-X     
-X      "\n"    to   "{OPTWS}\n"
-X      
-X - Enhancements:
-X    - new option "-?" that provides some help information about the other
-X      flags (main.c)
-X    - new option "-aTMPPATH" that allows a redefinition of the standard
-X      path for the temporary file (this might be rather large >200k if 
-X      F,f options are selected). (main.c, flexdef.h (l.376))
-X    - hexdump of illegal characters -- this proved to be a useful debugging
-X      tool especialy if invisible control characters occur which weren't
-X      covered by the rules. (scan.l  fprintf statement line 129,...)
-X      
-X - Patches due to TOS
-X    - General: TOS uses CR,LF as end of line char., Flex wants only a single
-X      LF as EOL char. Therefore all I/O must be translated using f* calls.
-X      This is done everywhere besides the YY_INPUT macro (flex.skel (scan.c),
-X      line 31) that uses a low level 'read'. This should be definitly changed
-X      to fread, so that all I/O calls occur on the same level.
-X    - the short action_file_name has been "flexXXXXXX.tmp", but that's too 
-X      much for TOS,MSDOS ! I changed it to "flexXXXX.tmp" in main.c (patch
-X      covered by the -a option additions)
-X    - some compilers don't like external names that are ambiguous within
-X      the first 8 characters. I defined macros that change all these long
-X      external names to names that are unique within the first 8 characters.
-X      Just define SHORT_EXTERNAL_NAMES to use this feature (flexdef.h)
-X    - some statement changes that some compiler don't like:
-X      typedef *xxx[]  -> typedef **xxx       (flexdef.h.,l.308)
-X      "/*" -> '/','*' within a comment in (scan.l, l.209)
-X    - changed short "lexyy.c" to "lex_yy.c" what's more similar to the unix
-X      "lex.yy.c" (main.c).
-X    - a few further really compiler dependent changes provided with
-X      #ifdef ATARI && LATTICE res. TURBO braces.
-X      
-X - Additional TOS only files
-X    - Makefile.tos: Common makefile for all TOS compilers. If you add further
-X      ones please email me the new makefile.
-X    - flex.lnk: Lattice - GST linker argument extension file
-X    - flex.tlk: Turbo linker argument extension file
-X      
-X    
-XAdditional remarks:
-X 
-XI didn't add a new initscan.c (= flex -ist scan.l). The current one is good
-Xenough for a first compilation. With this first version of flex you can
-Xrebuild your own scan.c and the final flex version !
-X
-XMinix ST :
-X  - I had to "chmem =70000 cv" (>50000) to get flex linked
-X  - 'memset' (PC 1.3, EFTH40,...) is necessary
-X  - chmem =90000 flex may be sufficient
-X  
-XMinix PC :
-X  It should be possible to port Flex to Minix PC. The current sizes of flex
-X  are:
-X                        Minix ST (ACK)    Lattice (TOS)    Turbo (TOS)
-X       
-X       size               75300             83305             57957
-X       compilation time      22'               15'             3'40"
-X       flex -is scan.l     1'49"               43"               30"
-X       
-X  The Minix ST size includes the bad generated code using only a subset of
-X  the 68000 commands, long addresses only and a huge relocation table.
-X  Therefore the PC size will be <64 k ! More serious is the fact that I had
-X  to chmem =90000 flex to get scan.l converted to scan.c . But I never saw
-X  a more complex lex source than scan.l -- so it should be possible to
-X  reduce some array sizes without limitation for all day usage.
-X  
-X  No one volunteered yet for a Minix PC port -- but if someone will try it
-X  I would provide him with a new scan.c and some hints.
-X  
-XTOS: 
-X  Don't forget to adapt the flexskel path within flexdef.h !
-X
-X
-/
-echo x - flex.lnk
-sed '/^X/s///' > flex.lnk << '/'
-X*
-X*
-X*  linker control file for flex.ttp
-X*
-X*
-X*
-XINPUT   d:\latt\lib\startup.bin
-X*
-XINPUT ccl.bin
-XINPUT dfa.bin
-XINPUT ecs.bin
-XINPUT gen.bin
-XINPUT misc.bin
-XINPUT nfa.bin
-XINPUT parse.bin
-XINPUT sym.bin
-XINPUT tblcmp.bin
-XINPUT main.bin
-XINPUT yylex.bin
-XINPUT scan.bin
-X*
-XLIBRARY d:\latt\lib\clib.bin
-X
-/
-echo x - flex.tlk
-sed '/^X/s///' > flex.tlk << '/'
-Xccl.o
-Xdfa.o
-Xecs.o
-Xgen.o
-Xmisc.o
-Xnfa.o
-Xparse.o
-Xsym.o
-Xtblcmp.o
-Xyylex.o
-Xmain.o
-Xscan.o
-Xd:\turbo\lib\tcstdlib.lib   ; standard lib
-Xd:\turbo\lib\tcextlib.lib   ; extended lib
-Xd:\turbo\lib\tctoslib.lib   ; TOS lib
-Xd:\turbo\lib\tcgemlib.lib   ; AES and VDI lib
-X-S=200000
-/
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Borland.old/Borland-2.4 b/WebKitTools/android/flex-2.5.4a/MISC/Borland.old/Borland-2.4
deleted file mode 100644
index 5602a14..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Borland.old/Borland-2.4
+++ /dev/null
@@ -1,419 +0,0 @@
-Received: from 128.140.1.1 by ee.lbl.gov for <vern@ee.lbl.gov> (8.6.9/1.43r)
-	id HAA01193; Thu, 29 Sep 1994 07:26:54 -0700
-Received: from larry-le0.cc.emory.edu by
-	emoryu1.cc.emory.edu (5.65/Emory_cc.4.0.1) via SMTP
-	id AA07292 ; Thu, 29 Sep 94 10:26:41 -0400
-From: tkane01@unix.cc.emory.edu (Terrence O Kane)
-Received: by larry.cc.emory.edu (5.0) id AA11757; Thu, 29 Sep 1994 10:26:43 +0500
-Message-Id: <9409291426.AA11757@larry.cc.emory.edu>
-Subject: patches and makefile for Borland C 4.02, flex 2.4.7
-To: vern@ee.lbl.gov
-Date: Thu, 29 Sep 1994 10:26:42 -0400 (EDT)
-X-Mailer: ELM [version 2.4 PL23]
-Mime-Version: 1.0
-Content-Type: text/plain; charset=US-ASCII
-Content-Transfer-Encoding: 7bit
-Content-Length: 9900      
-
-Enclosed are unified diffs and a makefile for Borland 4.02
-
-The changes in the enclosed are 1) make the size parameters for memory
-allocation "size_t", 2) change an include file when the lexer is 
-compiled within 'extern "C" {...}' in a C++ file, and 3) include pragmas 
-in the header suitable for BCC 4.02 to hush on warnings.
-
-The latter is done because of the limit on command line size.  A tradeoff 
-exists between putting pragmas in the header, or #defines in the header - 
-I put in the pragmas since they're suppoed to be ignored unless 
-understood - *and* they're enclosed in BCC specific ifdefs, anyway.
-
-All changes are enclosed in "#ifdef __BORLANDC__".
-
-
-
-
-
---- misc.c	Tue Jan 04 14:33:10 1994
-+++ ../misc.c	Wed Sep 28 18:44:32 1994
-@@ -55,15 +55,19 @@
- 	action_index += len;
- 	}
- 
- 
- /* allocate_array - allocate memory for an integer array of the given size */
- 
- void *allocate_array( size, element_size )
-+#ifndef __BORLANDC__
- int size, element_size;
-+#else /* __BORLANDC__ */
-+size_t size, element_size;
-+#endif /* __BORLANDC__ */
- 	{
- 	register void *mem;
- 
- 	/* On 16-bit int machines (e.g., 80286) we might be trying to
- 	 * allocate more than a signed int can hold, and that won't
- 	 * work.  Cheap test:
- 	 */
-@@ -634,15 +638,19 @@
- 	}
- 
- 
- /* reallocate_array - increase the size of a dynamic array */
- 
- void *reallocate_array( array, size, element_size )
- void *array;
-+#ifndef __BORLANDC__
- int size, element_size;
-+#else /* __BORLANDC__ */
-+size_t size, element_size;
-+#endif /* __BORLANDC__ */
- 	{
- 	register void *new_array;
- 
- 	/* Same worry as in allocate_array(): */
- 	if ( size * element_size <= 0 )
- 		flexfatal(
- 			"attempt to increase array size by less than 1 byte" );
-@@ -739,15 +747,19 @@
- 	}
- 
- 
- /* The following is only needed when building flex's parser using certain
-  * broken versions of bison.
-  */
- void *yy_flex_xmalloc( size )
-+#ifndef __BORLANDC__
- int size;
-+#else /* __BORLANDC__ */
-+size_t size;
-+#endif /* __BORLANDC__ */
- 	{
- 	void *result = flex_alloc( size );
- 
- 	if ( ! result  )
- 		flexfatal( "memory allocation failed in yy_flex_xmalloc()" );
- 
- 	return result;
-
-
-
-
-
---- skel.c	Wed Aug 03 11:38:32 1994
-+++ ../skel.c	Wed Sep 28 18:50:58 1994
-@@ -26,15 +26,19 @@
-   "",
-   "#ifdef __cplusplus",
-   "",
-   "#include <stdlib.h>",
-   "%+",
-   "class istream;",
-   "%*",
-+  "#ifndef __BORLANDC__",
-   "#include <unistd.h>",
-+  "#else /* __BORLANDC__ */",
-+  "#include <io.h>",
-+  "#endif /* __BORLANDC__ */",
-   "",
-   "/* Use prototypes in function declarations. */",
-   "#define YY_USE_PROTOS",
-   "",
-   "/* The \"const\" storage-class-modifier is valid. */",
-   "#define YY_USE_CONST",
-   "",
-@@ -240,16 +244,21 @@
-   "static int yy_start_stack_depth = 0;",
-   "static int *yy_start_stack = 0;",
-   "static void yy_push_state YY_PROTO(( int new_state ));",
-   "static void yy_pop_state YY_PROTO(( void ));",
-   "static int yy_top_state YY_PROTO(( void ));",
-   "%*",
-   "",
-+  "#ifndef __BORLANDC__",
-   "static void *yy_flex_alloc YY_PROTO(( unsigned int ));",
-   "static void *yy_flex_realloc YY_PROTO(( void *, unsigned int ));",
-+  "#else /* __BORLANDC__ */",
-+  "static void *yy_flex_alloc YY_PROTO(( size_t ));",
-+  "static void *yy_flex_realloc YY_PROTO(( void *, size_t ));",
-+  "#endif /* __BORLANDC__ */",
-   "static void yy_flex_free YY_PROTO(( void * ));",
-   "",
-   "#define yy_new_buffer yy_create_buffer",
-   "",
-   "%% yytext/yyin/yyout/yy_state_type/yylineno etc. def's & init go here",
-   "",
-   "#ifndef yytext_ptr",
-
-
-
-
-
---- initscan.c	Wed Aug 03 11:42:46 1994
-+++ ../initscan.c	Wed Sep 28 18:51:34 1994
-@@ -16,15 +16,19 @@
- #endif
- #endif
- 
- 
- #ifdef __cplusplus
- 
- #include <stdlib.h>
-+#ifndef __BORLANDC__
- #include <unistd.h>
-+#else /* __BORLANDC__ */
-+#include <io.h>
-+#endif /* __BORLANDC__ */
- 
- /* Use prototypes in function declarations. */
- #define YY_USE_PROTOS
- 
- /* The "const" storage-class-modifier is valid. */
- #define YY_USE_CONST
- 
-@@ -220,16 +224,21 @@
- static int yy_start_stack_ptr = 0;
- static int yy_start_stack_depth = 0;
- static int *yy_start_stack = 0;
- static void yy_push_state YY_PROTO(( int new_state ));
- static void yy_pop_state YY_PROTO(( void ));
- static int yy_top_state YY_PROTO(( void ));
- 
-+#ifndef __BORLANDC__
- static void *yy_flex_alloc YY_PROTO(( unsigned int ));
- static void *yy_flex_realloc YY_PROTO(( void *, unsigned int ));
-+#else /* __BORLANDC__ */
-+static void *yy_flex_alloc YY_PROTO(( size_t ));
-+static void *yy_flex_realloc YY_PROTO(( void *, size_t ));
-+#endif /* __BORLANDC__ */
- static void yy_flex_free YY_PROTO(( void * ));
- 
- #define yy_new_buffer yy_create_buffer
- 
- #define INITIAL 0
- #define SECT2 1
- #define SECT2PROLOG 2
-
-
-
-
-
---- flexdef.h	Tue Jan 04 14:33:14 1994
-+++ ../flexdef.h	Wed Sep 28 18:53:44 1994
-@@ -27,14 +27,25 @@
-  */
- 
- /* @(#) $Header: flexdef.h,v 1.2 94/01/04 14:33:14 vern Exp $ (LBL) */
- 
- #include <stdio.h>
- #include <ctype.h>
- 
-+#ifdef __BORLANDC__
-+#include <malloc.h>
-+
-+#pragma warn -pro
-+#pragma warn -rch
-+#pragma warn -use
-+#pragma warn -aus
-+#pragma warn -par
-+#pragma warn -pia
-+
-+#endif /* __BORLANDC__ */
- #if HAVE_STRING_H
- #include <string.h>
- #else
- #include <strings.h>
- #endif
- 
- #if __STDC__
-@@ -607,19 +618,29 @@
-  */
- 
- extern char nmstr[MAXLINE];
- extern int sectnum, nummt, hshcol, dfaeql, numeps, eps2, num_reallocs;
- extern int tmpuses, totnst, peakpairs, numuniq, numdup, hshsave;
- extern int num_backing_up, bol_needed;
- 
-+#ifndef __BORLANDC__
- void *allocate_array PROTO((int, int));
- void *reallocate_array PROTO((void*, int, int));
-+#else /* __BORLANDC__ */
-+void *allocate_array PROTO((size_t, size_t));
-+void *reallocate_array PROTO((void*, size_t, size_t));
-+#endif /* __BORLANDC__ */
- 
-+#ifndef __BORLANDC__
- void *flex_alloc PROTO((unsigned int));
- void *flex_realloc PROTO((void*, unsigned int));
-+#else /* __BORLANDC__ */
-+void *flex_alloc PROTO((size_t));
-+void *flex_realloc PROTO((void*, size_t));
-+#endif /* __BORLANDC__ */
- void flex_free PROTO((void*));
- 
- #define allocate_integer_array(size) \
- 	(int *) allocate_array( size, sizeof( int ) )
- 
- #define reallocate_integer_array(array,size) \
- 	(int *) reallocate_array( (void *) array, size, sizeof( int ) )
-@@ -772,15 +793,19 @@
- /* Write out one section of the skeleton file. */
- extern void skelout PROTO((void));
- 
- /* Output a yy_trans_info structure. */
- extern void transition_struct_out PROTO((int, int));
- 
- /* Only needed when using certain broken versions of bison to build parse.c. */
-+#ifndef __BORLANDC__
- extern void *yy_flex_xmalloc PROTO(( int ));
-+#else /* __BORLANDC__ */
-+extern void *yy_flex_xmalloc PROTO(( size_t ));
-+#endif /* __BORLANDC__ */
- 
- /* Set a region of memory to 0. */
- extern void zero_out PROTO((char *, int));
- 
- 
- /* from file nfa.c */
-
-
-
-
-
-###############################################################################
-# Makefile for flex 2.4.7 with Borland C/C++ version 4.02
-#
-# This will probably need to be adjusted for your existing lexer/parser
-# generators.  See definitions for FLEX and YACC near the bottom of the
-# makefile.
-#
-# Copy initscan.c to scan.c to make your first executable.  After that,
-# you may choose to try alternate compression options for your everyday
-# flex executable.
-#
-# This will build flex with the large model.  Don't use huge, but if you
-# feel like experimenting with other models, post your success stories to 
-# comp.compilers, OK?
-#
-# This makefile does *not* implement the big testing found in "makefile.in".
-#
-# I also assume the availability of sed and the gnu file utilities on the
-# system - they're readily available, so if you don't have them, why not?
-#                                                                 <grin>
-#
-# The resulting generated lexer (the real goal, right?) will compile
-# (and run nicely, too) as a .c file, as well as being included such as
-# extern "C" { #include "lexyyc" } in a .cplusplus file.
-#
-###############################################################################
-
-DEBUG = 1
-
-.autodepend
-
-all:	flex.exe
-
-###############################################################################
-#
-# standard utilitities? ha.
-#
-
-CC	= bcc
-CPP     = bcc
-
-###############################################################################
-#
-
-MODEL	= l
-
-!if $(DEBUG) == 1
-!message Building with debug.
-debugCompile = -v
-debugLink = /v
-!else
-!message Building without debug.
-debugCompile =
-debugLink =
-!endif
-
-LOADER	= c0$(MODEL).obj
-LIBS	= c$(MODEL).lib
-LINKFLAGS = $(debugLink)
-
-DATASEG	= -dc -Ff
-SizeOPT	= -Os -G-
-Defines = -DSHORT_FILE_NAMES=1 -DHAVE_STRING_H=1
-
-COMMON	= -A -c -m$(MODEL) $(SizeOPT) $(DATASEG) $(Defines) $(debugCompile)
-CFLAGS  = -o$@ $(COMMON)
-CCFLAGS  = -o$@ $(COMMON) -Pcc
-
-###############################################################################
-
-.SUFFIXES:	.cc
-
-.cc.obj:
-	$(CPP) $(CCFLAGS) $<
-
-.c.obj:
-	$(CPP) $(CFLAGS) $<
-
-###############################################################################
-#
-# source & object files
-#
-
-SRC =	ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.c \
-	scan.c sym.c tblcmp.c yylex.c skel.c
-
-OBJS = $(SRC:.c=.obj)
-
-objects:	$(OBJS)
-	@echo $(OBJS)
-
-###############################################################################
-#
-# Executable
-#
-
-flex.exe:      $(OBJS)
-	tlink $(LINKFLAGS) @&&!
-$(LOADER) $**
-$&.exe
-$&.map
-$(LIBS)
-!
-
-# 
-###############################################################################
-#
-# Lex files
-#
-
-FLEX	= .\flex
-FLEX_FLAGS = -ist
-
-scan.c: scan.l
-	$(FLEX) $(FLEX_FLAGS) scan.l >scan.tmp
-	sed s,\"$(srcdir)/scan.l\",\"scan.l\", <scan.tmp >scan.c
-	@rm scan.tmp
-
-###############################################################################
-#
-# YACC files
-#
-
-YACC	= .\bison
-YFLAGS  = -vdyl
-
-parse.c: parse.y
-	$(YACC) -ydl parse.y
-	@sed "/extern char.*malloc/d" <y_tab.c >parse.c
-	@rm -f y_tab.c
-	@mv y_tab.h parse.h
-
-#
-# end Makefile
-#
-###############################################################################
- 
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Borland.old/Turbo-C b/WebKitTools/android/flex-2.5.4a/MISC/Borland.old/Turbo-C
deleted file mode 100644
index bfe8a92..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Borland.old/Turbo-C
+++ /dev/null
@@ -1,179 +0,0 @@
-Received: from 128.84.254.220 by ee.lbl.gov for <vern@ee.lbl.gov> (8.6.8.1/1.43r)
-	id PAA27266; Mon, 18 Apr 1994 15:08:26 -0700
-Received: from CLOYD.CS.CORNELL.EDU by thialfi.cs.cornell.edu (5.67/I-1.99E)
-	id AA28742; Mon, 18 Apr 94 18:08:14 -0400
-Received: from iraun1.ira.uka.de by cloyd.cs.cornell.edu (5.67/I-1.99D)
-	id AA19613; Mon, 18 Apr 94 18:08:19 -0400
-Received: from t500i2.telematik.informatik. (actually t500i2.telematik.informatik.uni-karlsruhe.de) 
-          by iraun1.ira.uka.de with SMTP (PP); Tue, 19 Apr 1994 00:07:55 +0200
-Received: by t500i2.telematik.informatik.uni-karlsruhe.de (5.57/Ultrix3.0-C) 
-          id AA10269; Tue, 19 Apr 94 00:09:14 +0200
-From: beigl@t500i2.telematik.informatik.uni-karlsruhe.de (Michael Beigl)
-Message-Id: <9404182209.AA10269@t500i2.telematik.informatik.uni-karlsruhe.de>
-Subject: Makefile-TurboC
-To: vern@cs.cornell.edu
-Date: Tue, 19 Apr 1994 00:09:13 +0200 (MET DST)
-X-Mailer: ELM [version 2.4 PL22]
-Mime-Version: 1.0
-Content-Type: text/plain; charset=US-ASCII
-Content-Transfer-Encoding: 7bit
-Content-Length: 2739
-
-Hello
-
-Here are some additional adjustments to my Makefile. I was using "pure" DOS
-and an old Turbo C++ 1.0 version, so I had some problems with systemtools
-like mv etc. and problems with variables in my Makefile.
-
-Now follows my Makefile
-############################################################################
-# make file for "flex" tool
-
-# @(#) $Header: Makefile,v 2.3 89/06/20 17:27:12 vern Exp $ (LBL)
-
-# Porting considerations:
-#
-#    For BSD machines:
-#  CFLAGS =
-#  LDFLAGS = -s
-#  LINK = $(CC) $(CFLAGS) -o flex $(LDFLAGS) $(FLEXOBJS)
-#  SKELETON_DIR = .
-#  SKELETON_FILE = flex.skel
-#  SKELFLAGS = -DDEFAULT_SKELETON_FILE=\"$(SKELETON_DIR)/$(SKELETON_FILE)\"
-#  O = o
-#  YTAB = y.tab
-#  FLEX = ./flex
-#
-#    For System V Unix or Vax/VMS machines, merely add:
-#  CFLAGS = -DSYS_V
-#
-#    For MS-DOS, Turbo C:
-CC = tcc
-# -2+ 286 Options
-CFLAGS = -DSYS_V -DMS_DOS -O -G -Z -ml -v -2
-# /3 enable 32 bit processing
-# /ye expanded memory swapping
-# /yx extended memory swapping
-LINK = tlink @flex.lnk/c/x/v/3/ye
-SKELETON_DIR = .
-SKELETON_FILE = flex.skl
-SKELFLAGS = -DDEFAULT_SKELETON_FILE="$(SKELETON_DIR)/$(SKELETON_FILE)"
-O = obj
-EXE = .exe
-YTAB = y_tab
-FLEX = flex
-YACC = /yacc/byacc
-
-#
-# the first time around use "make first_flex"
-#
-
-FLEX_FLAGS =
-
-FLEXOBJS = \
-	ccl.$O \
-	dfa.$O \
-	ecs.$O \
-	gen.$O \
-	main.$O \
-	misc.$O \
-	nfa.$O \
-	parse.$O \
-	scan.$O \
-	sym.$O \
-	tblcmp.$O \
-	yylex.$O
-
-FLEX_C_SOURCES = \
-	ccl.c \
-	dfa.c \
-	ecs.c \
-	gen.c \
-	main.c \
-	misc.c \
-	nfa.c \
-	parse.c \
-	scan.c \
-	sym.c \
-	tblcmp.c \
-	yylex.c
-
-FLEX_C_SOURCES_1 = \
-	ccl.c \
-	dfa.c \
-	ecs.c \
-	gen.c \
-	main.c \
-	misc.c
-
-FLEX_C_SOURCES_2 = \
-	nfa.c \
-	parse.c \
-	scan.c \
-	sym.c \
-	tblcmp.c \
-	yylex.c
-
-flex.exe: $(FLEXOBJS)
-	$(LINK)
-
-
-flex: $(FLEX_C_SOURCES)
-	$(CC) $(CFLAGS) -c $(SKELFLAGS) $(FLEX_C_SOURCES_1)
-	$(CC) $(CFLAGS) -c $(SKELFLAGS) $(FLEX_C_SOURCES_2)
-	$(LINK)
-
-
-first_flex:
-	copy initscan.c scan.c
-	$(MAKE) flex
-
-parse.h parse.c: parse.y
-	$(YACC) -d parse.y
-	@rename $(YTAB).c parse.c
-	@rename $(YTAB).h parse.h
-
-scan.c: scan.l
-	$(FLEX) -ist $(FLEX_FLAGS) scan.l >scan.c
-
-scan.$O: scan.c parse.h
-
-main.$O: main.c
-	$(CC) $(CFLAGS) -c $(SKELFLAGS) main.c
-
-flex.man: flex.1
-	nroff -man flex.1 >flex.man
-
-lint: $(FLEX_C_SOURCES)
-	lint $(FLEX_C_SOURCES) > flex.lint
-
-distrib:
-	rename scan.c initscan.c
-	attrib +R -A -H -S initscan.c
-	$(MAKE) clean
-
-clean:
-	del *.obj
-	del *.lint
-	del core
-	del errs
-	del flex.exe
-	del parse.c
-	del parse.h
-	del flex.man
-	del tags
-
-tags:
-	ctags $(FLEX_C_SOURCES)
-
-vms:	flex.man
-	$(MAKE) distrib
-
-test:
-	$(FLEX) -ist $(FLEX_FLAGS) scan.l | diff scan.c -
- 
-############################################################################
-
-I think this Makefile will help some other simple DOS user
-
-	M. Beigl
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Borland/Makefile b/WebKitTools/android/flex-2.5.4a/MISC/Borland/Makefile
deleted file mode 100644
index 3b20090..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Borland/Makefile
+++ /dev/null
@@ -1,163 +0,0 @@
-###############################################################################
-# Makefile for flex 2.5.0.6 (beta) with Borland C/C++ version 4.02
-#
-# This will probably need to be adjusted for your existing lexer/parser
-# generators.  See definitions for FLEX and YACC near the bottom of the
-# makefile.
-#
-# This makefile builds initflex.exe and flex.exe by default.  It
-# removes initflex.exe after making flex.exe.  After that, you may
-# choose to try alternate compression options for your everyday flex
-# executable.
-#
-# This will build flex with the large model.  Don't use huge, but if you
-# feel like experimenting with other models, post your success stories to 
-# comp.compilers, OK?
-#
-# This makefile does *not* implement the big testing found in "makefile.in".
-#
-# I also assume the availability of sed and the gnu file utilities on the
-# system - they're readily available, so if you don't have them, why not?
-#                                                                 <grin>
-#
-# The resulting generated lexer (the real goal, right?) will compile
-# (and run nicely, too) as a .c file, as well as being included such as
-# extern "C" { #include "lexyyc" } in a .cplusplus file.
-#
-###############################################################################
-
-DEBUG = 1
-
-.autodepend
-
-all:	initflex.exe flex.exe
-	rm initflex.exe initflex.map
-
-###############################################################################
-#
-# standard utilitities? ha.
-#
-
-CC	= bcc
-CPP     = bcc
-
-###############################################################################
-#
-
-MODEL	= l
-
-!if $(DEBUG) == 1
-!message Building with debug.
-debugCompile = -v
-debugLink = /v
-!else
-!message Building without debug.
-debugCompile =
-debugLink =
-!endif
-
-LOADER	= c0$(MODEL).obj
-LIBS	= c$(MODEL).lib
-LINKFLAGS = $(debugLink)
-
-DATASEG	= -dc -Ff
-SizeOPT	= -Os -G-
-Defines =
-
-COMMON	= -A -c -m$(MODEL) $(SizeOPT) $(DATASEG) $(Defines) $(debugCompile)
-CFLAGS  = -o$@ $(COMMON)
-CCFLAGS  = -o$@ $(COMMON) -Pcc
-
-###############################################################################
-
-.SUFFIXES:	.cc
-
-.cc.obj:
-	$(CPP) $(CCFLAGS) $<
-
-.c.obj:
-	$(CPP) $(CFLAGS) $<
-
-###############################################################################
-#
-# source & object files
-#
-
-BASESRC = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.c \
-	sym.c tblcmp.c yylex.c skel.c
-
-INITSRC = $(BASESRC) initscan.c
-
-INITOBJS = $(INITSRC:.c=.obj)
-
-SRC = $(BASESRC) scan.c
-
-OBJS = $(SRC:.c=.obj)
-
-objects:	$(OBJS)
-	@echo $(OBJS)
-
-###############################################################################
-#
-# Executable
-#
-
-initflex.exe:      $(INITOBJS)
-	tlink $(LINKFLAGS) @&&!
-$(LOADER) $**
-$&.exe
-
-$(LIBS)
-!
-
-flex.exe:      $(OBJS)
-	tlink $(LINKFLAGS) @&&!
-$(LOADER) $**
-$&.exe
-
-$(LIBS)
-!
-
-# 
-###############################################################################
-#
-# Lex files
-#
-
-FLEX	= .\initflex
-FLEX_FLAGS = -ist
-
-scan.c: scan.l
-	$(FLEX) $(FLEX_FLAGS) scan.l >scan.tmp
-	sed s,\"$(srcdir)/scan.l\",\"scan.l\", <scan.tmp >scan.c
-	@rm scan.tmp
-
-###############################################################################
-#
-# YACC files
-#
-
-YACC	= .\bison
-YFLAGS  = -vdyl
-
-parse.c: parse.y
-	$(YACC) -ydl parse.y
-	@sed "/extern char.*malloc/d" <y_tab.c >parse.c
-	@rm -f y_tab.c
-	@mv y_tab.h parse.h
-
-###############################################################################
-#
-# cleanup
-#
-
-clean:
-	-rm *.obj *.map initflex.exe
-
-realclean:	clean
-	-rm flex.exe
-
-#
-# end Makefile
-#
-###############################################################################
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Borland/NOTES b/WebKitTools/android/flex-2.5.4a/MISC/Borland/NOTES
deleted file mode 100644
index caac3cc..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Borland/NOTES
+++ /dev/null
@@ -1,66 +0,0 @@
-Received: from 128.140.1.1 by ee.lbl.gov for <vern@ee.lbl.gov> (8.6.9/1.43r)
-	id PAA03966; Tue, 24 Jan 1995 15:03:57 -0800
-Received: from larry-le0.cc.emory.edu by
-	emoryu1.cc.emory.edu (5.65/Emory_cc.4.0.1) via SMTP
-	id AA24158 ; Tue, 24 Jan 95 17:18:18 -0500
-From: tkane01@unix.cc.emory.edu (Terrence O Kane)
-Received: by larry.cc.emory.edu (5.0) id AA21979; Tue, 24 Jan 1995 17:17:40 -0500
-Message-Id: <9501242217.AA21979@larry.cc.emory.edu>
-Subject: Re: Beta test for DOS
-To: vern@ee.lbl.gov (Vern Paxson)
-Date: Tue, 24 Jan 1995 17:17:38 -0500 (EST)
-In-Reply-To: <199501232138.NAA11430@daffy.ee.lbl.gov> from "Vern Paxson" at Jan 23, 95 01:38:02 pm
-X-Mailer: ELM [version 2.4 PL23]
-Mime-Version: 1.0
-Content-Type: text/plain; charset=US-ASCII
-Content-Transfer-Encoding: 7bit
-Content-Length: 5792      
-
-Vern,
-
-I've made flex 2.5.0.6 successfully with no changes to the source
-code at all.  I'm including the Borland 4.02 makefile and config.h
-at the end of this message.
-
-When you're ready for release, I'll be happy to take care of getting
-the appropriate archive files up to Simtel if you wish.
-
-I have not used this version for any of my "work-related" scanners
-yet, but have run the fastwc benchmark.  The compiles were for large
-memory model and optimization for fastest possible code.  The test
-machine was a Pentium-90 (hey! timing output was integer!) with
-enhanced IDE on a PCI bus and no file system caching.  I ran the
-test on two different input files.
-
-(Times are in seconds.)
-
-The first input was a typical postscript file concatenated 10 times;
-by typical, I mean that there were relatively few spaces, lots of lines
-with no space, using lots of parentheses.
-
-	lines  words  characters
-	91200  356260 5889240
-
-	mywc 	 8.89
-	wc1s 	15.22		default
-	wc1 	10.82		-Cf
-	wc2 	10.16		-Cf
-	wc3 	 9.17		-Cf
-	wc4 	 9.22		-Cf
-	wc5 	10.98		-Cf
-
-The second test run was on a file that consisted of 20 concatenations
-of 'misc/flex.man'.
-
-	lines  words  characters
-	69960   305140  2399960
-
-	mywc 	4.01
-	wc1s 	6.87
-	wc1 	5.32
-	wc2 	4.95
-	wc3 	4.12
-	wc4 	4.12
-	wc5 	5.05
-
-[[Makefile and config.h moved to separate files -VP]]
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Borland/config.h b/WebKitTools/android/flex-2.5.4a/MISC/Borland/config.h
deleted file mode 100644
index 5e210da..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Borland/config.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* $Header: /home/daffy/u0/vern/flex/RCS/conf.in,v 1.2 95/01/09 12:11:51 vern Exp $ */
-/* ------------------------------------------------ */
-/* version of config.h for Borland C/C++ v4.02      */
-/*                     flex version 2.5.0.6  (beta) */
-/* ------------------------------------------------ */
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-#undef size_t
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS 1
-
-/* Define if you have the <malloc.h> header file.  */
-#define HAVE_MALLOC_H 1
-
-/* Define if you have the <string.h> header file.  */
-#define HAVE_STRING_H 1
-
-/* Define if you have the <sys/types.h> header file.  */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-#undef HAVE_ALLOCA_H
-
-/* Define if platform-specific command line handling is necessary.  */
-#undef NEED_ARGV_FIXUP
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/EBCDIC b/WebKitTools/android/flex-2.5.4a/MISC/EBCDIC
deleted file mode 100644
index e4ebd71..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/EBCDIC
+++ /dev/null
@@ -1,48 +0,0 @@
-Return-Path: Mark_Ganter@liz.com
-Received: from 192.216.61.11 by horse.ee.lbl.gov for vern (5.65/1.43r)
-	id AA02152; Tue, 11 Jan 94 06:19:36 -0800
-Received: from melonville.radiomail.net (mayberry.radiomail.net) by radiomail.net with SMTP id AA20220
-  (5.65c+/IDA-1.4.4 for <vern@horse.ee.lbl.gov>); Tue, 11 Jan 1994 06:19:35 -0800
-Message-Id: <199401111419.AA20220@radiomail.net>
-Received: from liz.com by melonville.radiomail.net with CCGW-1.7(930217);
-          Tue, 11 Jan 94 06:19:17 
-From: Mark_Ganter@liz.com
-Date: 11 Jan 94 09:05
-To: vern@horse.ee.lbl.gov
-Subject: Re[2]: Flex on an AS400
-
-              I have no problem at all with being a contact for advice
-          on porting Flex to EBCDIC.  The code was put on an AS400, so
-          filing the message under /MISC/AS400 is more appropriate.
-          The port was an interesting, very educational experience.
-          Thanks again.
-
-
-                                           Mark
-
-------------------------------------------------------------------------
-Date: Tue, 18 Apr 1995 12:33:48 -0400
-To: "Michael W. Duffy" <mduffy@netcom.com>, Mark_Ganter@liz.com,
-        vern@ee.lbl.gov (Vern Paxson), slayten@cas.org
-From: slayten@cas.org (Steve Layten)
-Subject: RE: Porting LEX scanner on EBCDIC machine
-X-Mailer: <Windows Eudora Version 2.0.2>
-Content-Length: 918
-
-I came in late on this discussion - I don't follow comp.compilers very
-closely these days because my job has shifted somewhat.
-
-I ported (quite some time ago) flex 2.3.6 to an IBM 3090 under MVS, using
-the SAS C compiler. The approach I used was, as Vern suggested, was to
-translate the tables to reflect EBCDIC-based indices. I haven't even
-downloaded flex 2.4 yet, so I don't know what's in the current distribution.
-My patches were in the flex 2.3 distribution for a while in the MISC
-directory. If you want any more info feel free to drop me a line - I still
-have (somewhere) the patches that I created from version 2.3.6.
-
-Steve Layten
--- 
-Steven W. Layten, Senior Research Scientist
-Chemical Abstracts Service PO BOX 3012, Columbus, OH 43210  +1 614 447 3600
-INET: slayten@cas.org                                  FAX: +1 614 447 3813
-# # Speaking only for myself, and NOT for Chemical Abstracts Service! # # #
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/MSDOS/MSC70.make b/WebKitTools/android/flex-2.5.4a/MISC/MSDOS/MSC70.make
deleted file mode 100644
index 5980f3a..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/MSDOS/MSC70.make
+++ /dev/null
@@ -1,115 +0,0 @@
-#
-# make file for "flex" tool
-# @(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/Makefile,v 2.9 90/05/26 17:28:44
- vern Exp $ (LBL)
-#
-# the first time around use "make f_flex"
-#
-#  This makefile is specific for Microsoft's C/C++ compiler  (v7), nmake and
-#  lib      
-#         - Paul Stuart, Jan 93 (pjs@scammell.ecos.tne.oz.au)
-#
-
-
-SKELFLAGS = -DDEFAULT_SKELETON_FILE=\"c:/src/flex/flex.skl\"
-CFLAGS = -nologo -AL -W2 -F 8000 -Ox -Gt16000 -DMS_DOS -DUSG
-LDFLAGS = /nologo /NOI /BATCH /ONERROR:NOEXE  /STACK:8000
-FLEX_FLAGS = -ist8 -Sflex.skl
-
-FLEX = .\flex.exe
-CC = cl
-YACC = c:\lib\byacc
-MAKE = nmake /nologo
-
-#
-# break obj-list into two because of 128 character command-line limit of
-# Microsoft's link and lib utilities.
-#
-FLEXOBJS1 = \
-	ccl.obj \
-	dfa.obj \
-	ecs.obj \
-	gen.obj \
-	main.obj \
-	misc.obj \
-	nfa.obj \
-	parse.obj
-
-FLEXOBJS2 = \
-	scan.obj \
-	sym.obj \
-	tblcmp.obj \
-	yylex.obj
-
-FLEX_C_SOURCES = \
-	ccl.c \
-	dfa.c \
-	ecs.c \
-	gen.c \
-	main.c \
-	misc.c \
-	nfa.c \
-	parse.c \
-	scan.c \
-	sym.c \
-	tblcmp.c \
-	yylex.c
-
-FLEX_LIB_OBJS = \
-	libmain.obj
-
-
-all : flex.exe 
-
-#
-# lib is used to get around the 128 character command-line limit of 'link'.
-#
-flex.exe : $(FLEXOBJS1) $(FLEXOBJS2)
-	lib /nologo tmplib $(FLEXOBJS1);
-	link $(LDFLAGS) $(FLEXOBJS2),$*.exe,,tmplib;
-	del tmplib.lib
-
-f_flex:
-	copy initscan.c scan.c
-	touch scan.c
-	@echo  compiling first flex  
-	$(MAKE) flex.exe 
-	del scan.c
-	@echo using first flex to generate final version...
-	$(MAKE) flex.exe
-
-#
-# general inference rule
-#
-.c.obj:
-	$(CC) -c $(CFLAGS) $*.c
-
-parse.h parse.c : parse.y
-	$(YACC) -d parse.y
-	@mv y_tab.c parse.c
-	@mv y_tab.h parse.h
-
-scan.c : scan.l
-	$(FLEX) $(FLEX_FLAGS) $(COMPRESSION) scan.l >scan.c
-
-
-scan.obj : scan.c parse.h flexdef.h
-
-main.obj : main.c flexdef.h
-	$(CC) $(CFLAGS) -c $(SKELFLAGS) main.c
-
-ccl.obj : ccl.c flexdef.h
-dfa.obj : dfa.c flexdef.h
-ecs.obj : ecs.c flexdef.h
-gen.obj : gen.c flexdef.h
-misc.obj : misc.c flexdef.h
-nfa.obj : nfa.c flexdef.h
-parse.obj : parse.c flexdef.h
-sym.obj : sym.c flexdef.h
-tblcmp.obj : tblcmp.c flexdef.h
-yylex.obj : yylex.c flexdef.h
-
-
-clean :
-	del *.obj
-	del *.map
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/MSDOS/configur.bat b/WebKitTools/android/flex-2.5.4a/MISC/MSDOS/configur.bat
deleted file mode 100644
index dbea0e4..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/MSDOS/configur.bat
+++ /dev/null
@@ -1,6 +0,0 @@
-@echo off
-
-sed -e "s/y\.tab\./parse_tab\./" -e "/sed/ s/'/\"/g" < Makefile.in > Makefile
-sed -f MISC/MSDOS/djgpp.sed Makefile.in > Makefile
-
-update initscan.c scan.c
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/MSDOS/djgpp.sed b/WebKitTools/android/flex-2.5.4a/MISC/MSDOS/djgpp.sed
deleted file mode 100644
index b436113..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/MSDOS/djgpp.sed
+++ /dev/null
@@ -1,12 +0,0 @@
-s/y\.tab\./parse_tab\./
-s/@DEFS@/-DMS_DOS/
-s/@LIBS@//
-s/@srcdir@/./
-s/@YACC@/bison/
-s/@CC@/gcc/
-s/@RANLIB@/ranlib/
-s/@ALLOCA@//
-/^flex/ s/\.bootstrap//
-/sed.*extern.*malloc/ c\
-	@mv parse_tab.c parse.c
-/rm.*parse_tab.c/ d
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/MVS/MVS.mail b/WebKitTools/android/flex-2.5.4a/MISC/MVS/MVS.mail
deleted file mode 100644
index 5a75e5b..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/MVS/MVS.mail
+++ /dev/null
@@ -1,56 +0,0 @@
-(Message inbox:40)
-Date:  Tue, 17 Jul 1990 11:56 EDT
-From:  swl26%CAS.BITNET@CORNELLC.cit.cornell.edu
-Subject:  Re(2): port of flex-2.3 to IBM/MVS
-To:  vern@cs.cornell.edu
-
->Message received.  I'm sending this response to
->swl26%CAS.BITNET@CORNELLC.cit.cornell.edu.
-
-Great -- we can talk.
-
->How extensive are the diffs?  If they're fairly short then yes, please
->send them.  If they're pretty involved then probably not, as I'm not aware
->of many MVS flex users ...
-
-I've built a context diff file which is ~850 lines.
-
-Summary of major changes necessary:
-
-   o a new initscan.c -- because MVS is ebcdic, the initial scanner had
-     to be changed.  I built a scanner from scan.l using -Ce, then
-     hand-manipulated the yy_ec table to fit EBCDIC instead of ASCII
-     chars.  (This is not included in the diff file above.)
-
-   o changes in main and flexdef.h to change how files are handled.  (No
-     dynamic file names, etc.)
-
-   o Some lines had to be shortened to 80 bytes.  This mostly impacted
-     your RCSID lines, which with the full path name were too long.
-
-   o SASC and the linker don't allow externals to be longer than 8 chars.
-     I thus wrote a Q&D program to shorten all externals.  (This would be
-     a separate file 'fixit.l', which is not included in the diffs.)
-
-   o There are several places where there are tests for 'isascii' (which I
-     deleted conditionally, using #ifdefs), and tests for 'A' <= x <= 'Z'
-     which I changed to 'isupper'.
-
-Many of the changes I've incorporated without impacting other systems.
-Others are with 'ifdefs'.  Still others (the short external names and new
-initscan) are 'isolable' as separate files which would have to be
-included with a distribution.
-
-Obviously, you are not going to want to (even if you can :-) ) worry about
-testing new versions in the MVS environment.  Likewise, I don't have the
-time or resources to provide much support. (I'm not sure my management
-would allow any :-( )
-
-With all of the above feel free to say "Thanks, but no thanks."  If you
-want to see the diffs anyway, I will certainly mail them.
-
-Thanks for your time and efforts.
-
-Steve Layten
-Chemical Abstracts Service, PO Box 3012, Columbus, OH 43210, +1 614 421-3600
-INET: swl26%cas.BITNET@CUNYVM.CUNY.Edu
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/MVS/MVS.todo b/WebKitTools/android/flex-2.5.4a/MISC/MVS/MVS.todo
deleted file mode 100644
index b6060ec..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/MVS/MVS.todo
+++ /dev/null
@@ -1,23 +0,0 @@
-(Message inbox:47)
-Date:  Wed, 18 Jul 1990 14:16 EDT
-From:  swl26%CAS.BITNET@CORNELLC.cit.cornell.edu
-Subject:  Re(2): Re(2): diffs for mvs port of flex-2.3
-To:  vern@cs.cornell.edu
-
-
-
->Thanks, I've successfully unpacked the archive.  I may simply distribute
->the diffs as a set of files in the MISC/ directory rather than incorporating
->them into the 2.4 release.  Let me know if you don't want me to do so.
->
->               Vern
-
-
-Thank you!  What you propose is okay.  I might suggest, however, that you
-look in the diffs for dfa.c, misc.c, and yylex.c, and consider removing
-some of the ASCIIisms which are probably unnecessary.  The manner in
-which I made the changes was pure brute force, and there might be a
-better way, but the changes I made there shouldn't hurt anything.
-
-        regards,
-        Steve
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/MVS/MVS.uudecode b/WebKitTools/android/flex-2.5.4a/MISC/MVS/MVS.uudecode
deleted file mode 100644
index 2b8e802..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/MVS/MVS.uudecode
+++ /dev/null
@@ -1,341 +0,0 @@
-Received: from CU-ARPA.CS.CORNELL.EDU by loki.cs.cornell.edu (5.61/I-1.91f)
-	id AA25874; Wed, 18 Jul 90 12:02:22 -0400
-Message-Id: <9007181320.AA24810@cu-arpa.cs.cornell.edu>
-Received: from CORNELLC.CIT.CORNELL.EDU by cu-arpa.cs.cornell.edu (5.61+2/1.91d)
-	id AA24810; Wed, 18 Jul 90 09:20:21 -0400
-Received: from CORNELLC by CORNELLC.cit.cornell.edu (IBM VM SMTP R1.2.1MX) with BSMTP id 6769; Wed, 18 Jul 90 09:18:46 EDT
-Received: from CAS.BITNET (MAILER) by CORNELLC (Mailer R2.05X) with BSMTP id
- 5378; Wed, 18 Jul 90 09:18:38 EDT
-From: swl26%CAS.BITNET@CORNELLC.cit.cornell.edu
-Date: Wed, 18 Jul 1990 09:16 EDT
-Subject: Re(2): diffs for mvs port of flex-2.3
-In-Reply-To: Your message of Tue, 17 Jul 90 17:42:3
-To: vern@cs.cornell.edu
-
-Sorry about the trailing blank problem.  It's farily common with data sent
-through bitnet paths, but ever the optimist ...
-
->I think there should be an 'M' at the beginning of the second line.
-
-This isn't a problem.  I believe that the first byte of the line indicates
-it's length (in some manner).
-
-Rather than re-send the data, how about a uudecode that compensates for
-the trailing blank problem?  I manually mangled the uuencoded file and ran
-the following decode, and it seemed to work.
-
-#! /bin/sh
-# This is a shell archive.  Remove anything before this line, then feed it
-# into a shell via "sh file" or similar.  To overwrite existing files,
-# type "sh file -c".
-# The tool that generated this appeared in the comp.sources.unix newsgroup;
-# send mail to comp-sources-unix@uunet.uu.net if you want that tool.
-# If this archive is complete, you will see the following message at the end:
-#               "End of shell archive."
-# Contents:  uudecode.c
-# Wrapped by swl26@swl26aws on Wed Jul 18 08:59:24 1990
-PATH=/bin:/usr/bin:/usr/ucb ; export PATH
-if test -f 'uudecode.c' -a "${1}" != "-c" ; then
-  echo shar: Will not clobber existing file \"'uudecode.c'\"
-else
-echo shar: Extracting \"'uudecode.c'\" \(6418 characters\)
-sed "s/^X//" >'uudecode.c' <<'END_OF_FILE'
-X/* #ifndef lint
-Xstatic char sccsid[] = "@(#)uudecode.c  5.3-1 (Berkeley) 9/1/87";
-X#endif */
-X
-X/* Written by Mark Horton */
-X/* Modified by ajr (Alan J Rosenthatl,flaps@utcsri.UUCP) to use checksums */
-X/* Modified by fnf (Fred Fish,well!fnf) to use Keith Pyle's suggestion for
-X   compatibility */
-X/* Modified by bcn (Bryce Nesbitt,ucbvax!cogsci!bryce) to fix a misleading
-X   error message on the Amiga port, to fix a bug that prevented decoding
-X   certain files, to work even if trailing spaces have been removed from a
-X   file, to check the filesize (if present), to add some error checking, to
-X   loop for multiple decodes from a single file, and to handle common
-X   BITNET mangling.  Also kludged around a missing string function in Aztec
-X   C */
-X
-X/*
-X * uudecode [input]
-X *
-X * Decode a file encoded with uuencode.  WIll extract multiple encoded
-X * modules from a single file. Can deal with most mangled files, including
-X * BITNET.
-X */
-X
-X#include <stdio.h>
-X#include <ctype.h>
-X
-X#ifdef AMIGA
-X#define AMIGA_LATTICE      /* Set for Amiga Lattice C */
-X#define MCH_AMIGA
-X#define MPU68000
-X#endif
-X
-X#ifdef unix
-X#include <pwd.h>
-X#include <sys/types.h>
-X#include <sys/stat.h>
-X#endif
-X
-X#define SUMSIZE 64
-X#define DEC(c) (((c) - ' ') & 077)    /* single character decode */
-X
-Xmain(argc, argv)
-Xchar **argv;
-X{
-XFILE   *in, *out;
-Xint    through_loop=0; /* Dejavu indicator */
-Xint    mode;           /* file's mode (from header) */
-Xlong   filesize;       /* theoretical file size (from header) */
-Xchar   dest[128];
-Xchar   buf[80];
-X
-X#ifdef AMIGA_LATTICE
-Xextern int Enable_Abort;
-X       Enable_Abort=1;
-X#endif
-X
-X    /* A filename can be specified to be uudecoded, or nothing can
-X    be specified, and the input will come from STDIN */
-X
-X    switch (argc)
-X       {
-X       case 1:
-X       in=stdin;
-X       break;
-X
-X       case 2:
-X       if ((in = fopen(argv[1], "r")) == NULL)
-X           {
-X           fprintf(stderr, "ERROR: can't find %s\n", argv[1]);
-X           fprintf(stderr, "USAGE: uudecode [infile]\n");
-X           exit(10);
-X           }
-X       break;
-X
-X       default:
-X       fprintf(stderr, "USAGE: uudecode [infile]\n");
-X       exit(11);
-X       break;
-X       }
-X
-X    /* Loop through file, searching for headers.  Decode anything with a
-X       header, complain if there where no headers. */
-X
-Xfor (;;)
-X{
-X    /* search file for header line */
-X    for (;;)
-X       {
-X       if (fgets(buf, sizeof buf, in) == NULL)
-X           {
-X           if (!through_loop)
-X               {
-X               fprintf(stderr, "ERROR: no `begin' line!\n");
-X               exit(12);
-X               }
-X           else
-X               {
-X               exit(0);
-X               }
-X           }
-X       if (strncmp(buf, "begin ", 6) == 0)
-X           break;
-X       }
-X    sscanf(buf, "begin %o %s", &mode, dest);
-X
-X#ifdef unix
-X    /* handle ~user/file format */
-X    if (dest[0] == '~')
-X       {
-X       char *sl;
-X       struct passwd *getpwnam();
-X       char *index();
-X       struct passwd *user;
-X       char dnbuf[100];
-X
-X       sl = index(dest, '/');
-X       if (sl == NULL)
-X           {
-X           fprintf(stderr, "Illegal ~user\n");
-X               exit(13);
-X           }
-X       *sl++ = 0;
-X       user = getpwnam(dest+1);
-X       if (user == NULL)
-X           {
-X           fprintf(stderr, "No such user as %s\n", dest);
-X           exit(14);
-X           }
-X       strcpy(dnbuf, user->pw_dir);
-X       strcat(dnbuf, "/");
-X       strcat(dnbuf, sl);
-X       strcpy(dest, dnbuf);
-X       }
-X#endif
-X
-X    /* create output file */
-X    if ((out = fopen(dest, "w")) == NULL)
-X       {
-X       fprintf(stderr, "ERROR: can't open output file %s\n", dest);
-X       exit(15);
-X       }
-X#ifdef unix
-X    chmod(dest, mode);
-X#endif
-X
-X    decode(in, out, dest);
-X
-X    if (fgets(buf, sizeof buf, in) == NULL || strncmp(buf,"end",3))
-X       {              /* don't be overly picky about newline ^ */
-X       fprintf(stderr, "ERROR: no `end' line\n");
-X       exit(16);
-X       }
-X
-X    if (!(fgets(buf,sizeof buf,in) == NULL || strncmp(buf,"size ",3)))
-X       {
-X       sscanf(buf, "size %ld", &filesize);
-X       if (ftell(out) != filesize)
-X           {
-X           fprintf(stderr, "ERROR: file should have been %ld bytes long but was
-X           exit(17);
-X           }
-X       }
-X    through_loop = 1;
-X}   /* forever */
-X}   /* main */
-X
-X/*
-X * Copy from in to out, decoding as you go.
-X * If a return or newline is encountered too early in a line, it is
-X * assumed that means that some editor has truncated trailing spaces.
-X */
-Xdecode(in, out, dest)
-XFILE *in;
-XFILE *out;
-Xchar *dest;
-X{
-Xchar buf[81];
-Xchar *bp;
-Xint nosum=0;
-X#ifndef unix
-Xextern errno;
-X#endif
-Xregister int j;
-Xregister int n;
-Xint checksum, line;
-X
-X    for (line = 1; ; line++)   /* for each input line */
-X       {
-X       if (fgets(buf, sizeof buf, in) == NULL)
-X           {
-X           fprintf(stderr, "ERROR: input ended unexpectedly!\n");
-X           exit(18);
-X           }
-X
-X       /* Pad end of lines in case some editor truncated trailing
-X          spaces */
-X
-X       for (n=0;n<79;n++)  /* search for first \r, \n or \000 */
-X           {
-X           if (buf[n]=='\176')     /* If BITNET made a twiddle, */
-X               buf[n]='\136';     /* we make a caret           */
-X           if (buf[n]=='\r'||buf[n]=='\n'||buf[n]=='\000')
-X               break;
-X           }
-X       for (;n<79;n++)     /* when found, fill rest of line with space */
-X           {
-X           buf[n]=' ';
-X           }
-X       buf[79]=0;          /* terminate new string */
-X
-X       checksum = 0;
-X       n = DEC(buf[0]);
-X       if (n <= 0)
-X           break;      /* 0 bytes on a line??  Must be the last line */
-X
-X       bp = &buf[1];
-X
-X       /* FOUR input characters go into each THREE output charcters */
-X
-X       while (n >= 4)
-X           {
-X           j = DEC(bp[0]) << 2 | DEC(bp[1]) >> 4; putc(j, out); checksum += j;
-X           j = DEC(bp[1]) << 4 | DEC(bp[2]) >> 2; putc(j, out); checksum += j;
-X           j = DEC(bp[2]) << 6 | DEC(bp[3]);      putc(j, out); checksum += j;
-X           checksum = checksum % SUMSIZE;
-X           bp += 4;
-X           n -= 3;
-X           }
-X
-X           j = DEC(bp[0]) << 2 | DEC(bp[1]) >> 4;
-X               checksum += j;
-X               if (n >= 1)
-X                   putc(j, out);
-X           j = DEC(bp[1]) << 4 | DEC(bp[2]) >> 2;
-X               checksum += j;
-X               if (n >= 2)
-X                   putc(j, out);
-X           j = DEC(bp[2]) << 6 | DEC(bp[3]);
-X               checksum += j;
-X               if (n >= 3)
-X                   putc(j, out);
-X           checksum = checksum % SUMSIZE;
-X           bp += 4;
-X           n -= 3;
-X
-X#ifndef unix
-X        /* Error checking under UNIX??? You must be kidding... */
-X        /* Check if an error occured while writing to that last line */
-X       if (errno)
-X           {
-X           fprintf(stderr, "ERROR: error writing to %s\n",dest);
-X           exit(19);
-X           }
-X#endif
-X
-X       /* The line has been decoded; now check that sum */
-X
-X       nosum |= !isspace(*bp);
-X       if (nosum)                      /* Is there a checksum at all?? */
-X           {
-X           if (checksum != DEC(*bp))   /* Does that checksum match? */
-X               {
-X               fprintf(stderr, "ERROR: checksum mismatch decoding %s, line %d.\
-X               }
-X           }   /* sum */
-X    }  /* line */
-X}   /* function */
-X
-X#ifdef unix
-X/*
-X * Return the ptr in sp at which the character c appears;
-X * 0 if not found
-X */
-Xchar *
-Xindex(sp, c)
-Xregister char *sp, c;
-X{
-X    do
-X       {
-X       if (*sp == c)
-X           return(sp);
-X       }
-X    while (*sp++);
-X
-X    return(0);
-X}
-X#endif unix
-X
-
-END_OF_FILE
-echo shar: NEWLINE appended to \"'uudecode.c'\"
-if test 6419 -ne `wc -c <'uudecode.c'`; then
-    echo shar: \"'uudecode.c'\" unpacked with wrong size!
-fi
-# end of 'uudecode.c'
-fi
-echo shar: End of shell archive.
-exit 0
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/MVS/README b/WebKitTools/android/flex-2.5.4a/MISC/MVS/README
deleted file mode 100644
index 09741ab..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/MVS/README
+++ /dev/null
@@ -1,44 +0,0 @@
-These patches and supplemental programs should allow porting to MVS or MVS/XA
-in an EBCDIC envrionment, using SAS C V4.00C.
-
-Included are:
-        -rw-r--r--   1 swl26    1573 Jul 17 14:32 README
-	-rw-rw-r--   1 swl26   20861 Jul 17 13:41 diffs
-	-rw-rw-r--   1 swl26    5022 Jul 17 14:00 fixit.l
-	-rw-rw-r--   1 swl26   97644 Jul 17 13:42 initscan.mvs.c
-	-rw-rw-r--   1 swl26    4898 Jul 17 14:08 unfixit.l
-
-The file "diffs" contains context diffs for changes to flex 2.3.
-
-The file "fixit.l" contains flex sources for a program to shorten external
-variable and function names to 8 characters or less.  This is required for the
-"dumb" compiler linker used.
-
-The file "unfixit.l" reverses the changes in "fixit.l", to restore long names.
-This is useful when trying to build diff files as created here.
-
-The file "initscan.mvs.c" is an already "flexed" version of scan.l, in an
-EBCDIC environment.
-
-To install in an MVS environment, use patch to apply the diffs to flex 2.3,
-then run "fixit" on all .c, .h, .l, .y, and .skel files.  Move the files
-to the MVS machine, and compile each of the .c files. (You will need a
-"yacc" functional equivalent under MVS to expand parse.y in that
-environment.)  Link together, and the resulting flex should be ready to
-go.  To test, run the MVSflex -is8 -Ce on the scan.l, and you should get
-back a file which is identical to initscan.mvs.c.
-
-Enjoy.
-
-Steven W. Layten
-Senior Engineer
-Chemical Abstracts Service
-PO Box 3012
-2540 Olentangy River Road
-Columbus, Ohio 43210
-
-+1 614 421 3600 extension 3451
-
-INET: swl26%cas.BITNET@CUNYVM.CUNY.Edu
-UUCP: osu-cis!chemabs!swl26
-BITNET: swl26@cas.bitnet
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/MVS/diffs b/WebKitTools/android/flex-2.5.4a/MISC/MVS/diffs
deleted file mode 100644
index 98dfbdf..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/MVS/diffs
+++ /dev/null
@@ -1,854 +0,0 @@
-diff -c ../Makefile ./Makefile
-*** ../Makefile	Thu Jun 28 00:44:07 1990
---- ./Makefile	Mon Jul 16 13:57:26 1990
-***************
-*** 39,49 ****
-  # AUXDIR, manual pages will be installed in MANDIR with extension MANEXT.
-  # Raw, unformatted troff source will be installed if INSTALLMAN=man, nroff
-  # preformatted versions will be installed if INSTALLMAN=cat.
-! DESTDIR =
-  BINDIR = /usr/local
-  LIBDIR = /usr/local/lib
-  AUXDIR = /usr/local/lib
-  MANDIR = /usr/man/manl
-  MANEXT = l
-  INSTALLMAN = man
-  
---- 39,50 ----
-  # AUXDIR, manual pages will be installed in MANDIR with extension MANEXT.
-  # Raw, unformatted troff source will be installed if INSTALLMAN=man, nroff
-  # preformatted versions will be installed if INSTALLMAN=cat.
-! DESTDIR = /projects/m751stereo/code/c/swl26
-  BINDIR = /usr/local
-  LIBDIR = /usr/local/lib
-  AUXDIR = /usr/local/lib
-  MANDIR = /usr/man/manl
-+ INCLUDEDIR = .
-  MANEXT = l
-  INSTALLMAN = man
-  
-***************
-*** 52,58 ****
-  
-  SKELETON_FILE = $(DESTDIR)$(AUXDIR)/flex.skel
-  SKELFLAGS = -DDEFAULT_SKELETON_FILE=\"$(SKELETON_FILE)\"
-! CFLAGS = -O
-  LDFLAGS = -s
-  
-  COMPRESSION =
---- 53,59 ----
-  
-  SKELETON_FILE = $(DESTDIR)$(AUXDIR)/flex.skel
-  SKELFLAGS = -DDEFAULT_SKELETON_FILE=\"$(SKELETON_FILE)\"
-! CFLAGS = -O -DUSG -I$(INCLUDEDIR)
-  LDFLAGS = -s
-  
-  COMPRESSION =
-diff -c ../ccl.c ./ccl.c
-*** ../ccl.c	Thu Jun 28 00:44:07 1990
---- ./ccl.c	Mon Jul 16 13:57:27 1990
-***************
-*** 28,37 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/ccl.c,v 2.5 90/06/27 23:48:13 vern Exp $ (LBL)";
-  #endif
-  
-! #include "flexdef.h"
-  
-  /* ccladd - add a single character to a ccl
-   *
---- 28,37 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: ccl.c,v 2.5 90/06/27 23:48:13 vern Exp $ (LBL)";
-  #endif
-  
-! #include <flexdef.h>
-  
-  /* ccladd - add a single character to a ccl
-   *
-diff -c ../dfa.c ./dfa.c
-*** ../dfa.c	Thu Jun 28 00:44:08 1990
---- ./dfa.c	Mon Jul 16 13:57:28 1990
-***************
-*** 28,37 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/dfa.c,v 2.7 90/06/27 23:48:15 vern Exp $ (LBL)";
-  #endif
-  
-! #include "flexdef.h"
-  
-  
-  /* declare functions that have forward references */
---- 28,38 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: dfa.c,v 2.7 90/06/27 23:48:15 vern Exp $ (LBL)";
-  #endif
-  
-! #include <flexdef.h>
-! #include <ctype.h>
-  
-  
-  /* declare functions that have forward references */
-***************
-*** 682,688 ****
-  	    register int j;
-  
-  	    for ( i = 'A', j = 'a'; i <= 'Z'; ++i, ++j )
-! 		state[i] = state[j];
-  	    }
-  
-  	if ( ds > num_start_states )
---- 683,692 ----
-  	    register int j;
-  
-  	    for ( i = 'A', j = 'a'; i <= 'Z'; ++i, ++j )
-! 		{
-! 		if (isupper(i) )
-! 		   state[i] = state[j];
-! 		}
-  	    }
-  
-  	if ( ds > num_start_states )
-***************
-*** 958,964 ****
-  		    }
-  	    }
-  
-! 	else if ( sym >= 'A' && sym <= 'Z' && caseins )
-  	    flexfatal( "consistency check failed in symfollowset" );
-  
-  	else if ( sym == SYM_EPSILON )
---- 962,968 ----
-  		    }
-  	    }
-  
-! 	else if ( isupper ( sym ) && caseins )
-  	    flexfatal( "consistency check failed in symfollowset" );
-  
-  	else if ( sym == SYM_EPSILON )
-Only in .: diffs
-Only in .: diffs.new
-diff -c ../ecs.c ./ecs.c
-*** ../ecs.c	Thu Jun 28 00:44:08 1990
---- ./ecs.c	Mon Jul 16 13:57:28 1990
-***************
-*** 28,37 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/ecs.c,v 2.5 90/06/27 23:48:17 vern Exp $ (LBL)";
-  #endif
-  
-! #include "flexdef.h"
-  
-  /* ccl2ecl - convert character classes to set of equivalence classes
-   *
---- 28,37 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: ecs.c,v 2.5 90/06/27 23:48:17 vern Exp $ (LBL)";
-  #endif
-  
-! #include <flexdef.h>
-  
-  /* ccl2ecl - convert character classes to set of equivalence classes
-   *
-diff -c ../flex.skel ./flex.skel
-*** ../flex.skel	Thu Jun 28 00:44:27 1990
---- ./flex.skel	Mon Jul 16 13:57:29 1990
-***************
-*** 1,7 ****
-  /* A lexical scanner generated by flex */
-  
-  /* scanner skeleton version:
-!  * $Header: /usr/fsys/odin/a/vern/flex/RCS/flex.skel,v 2.13 90/05/26 17:24:13 vern Exp $
-   */
-  
-  #define FLEX_SCANNER
---- 1,7 ----
-  /* A lexical scanner generated by flex */
-  
-  /* scanner skeleton version:
-!  * $Header: flex.skel,v 2.13 90/05/26 17:24:13 vern Exp $
-   */
-  
-  #define FLEX_SCANNER
-diff -c ../flexdef.h ./flexdef.h
-*** ../flexdef.h	Thu Jun 28 00:44:27 1990
---- ./flexdef.h	Mon Jul 16 13:57:30 1990
-***************
-*** 26,32 ****
-   * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-   */
-  
-! /* @(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/flexdef.h,v 2.7 90/06/27 23:48:19 vern Exp $ (LBL) */
-  
-  #ifndef FILE
-  #include <stdio.h>
---- 26,32 ----
-   * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-   */
-  
-! /* @(#) $Header: flexdef.h,v 2.7 90/06/27 23:48:19 vern Exp $ (LBL) */
-  
-  #ifndef FILE
-  #include <stdio.h>
-***************
-*** 45,51 ****
-  
-  /* size of input alphabet - should be size of ASCII set */
-  #ifndef DEFAULT_CSIZE
-! #define DEFAULT_CSIZE 128
-  #endif
-  
-  #ifndef PROTO
---- 45,51 ----
-  
-  /* size of input alphabet - should be size of ASCII set */
-  #ifndef DEFAULT_CSIZE
-! #define DEFAULT_CSIZE 256
-  #endif
-  
-  #ifndef PROTO
-***************
-*** 90,96 ****
---- 90,98 ----
-  #define SHORT_FILE_NAMES
-  #endif
-  
-+ #ifndef OSVS
-  char *malloc(), *realloc();
-+ #endif
-  
-  
-  /* maximum line length we'll have to deal with */
-***************
-*** 116,125 ****
-  #define true 1
-  #define false 0
-  
-- 
-  #ifndef DEFAULT_SKELETON_FILE
-  #define DEFAULT_SKELETON_FILE "flex.skel"
-! #endif
-  
-  /* special chk[] values marking the slots taking by end-of-buffer and action
-   * numbers
---- 118,132 ----
-  #define true 1
-  #define false 0
-  
-  #ifndef DEFAULT_SKELETON_FILE
-+ #ifdef OSVS
-+ #define DEFAULT_SKELETON_FILE "ctri01"
-+ #define SYSUT1	"sysut1" 
-+ #define SYSUT2	"sysut2" 
-+ #else
-  #define DEFAULT_SKELETON_FILE "flex.skel"
-! #endif /* OSVS */
-! #endif /* DEFAULT_SKELETON_FILE */
-  
-  /* special chk[] values marking the slots taking by end-of-buffer and action
-   * numbers
-***************
-*** 226,233 ****
-  #define INITIAL_MAX_SCS 40	/* maximum number of start conditions */
-  #define MAX_SCS_INCREMENT 40	/* amount to bump by if it's not enough */
-  
-! #define ONE_STACK_SIZE 500	/* stack of states with only one out-transition */
-! #define SAME_TRANS -1	/* transition is the same as "default" entry for state */
-  
-  /* the following percentages are used to tune table compression:
-  
---- 233,240 ----
-  #define INITIAL_MAX_SCS 40	/* maximum number of start conditions */
-  #define MAX_SCS_INCREMENT 40	/* amount to bump by if it's not enough */
-  
-! #define ONE_STACK_SIZE 500  /*stack of states with only one out-transition*/
-! #define SAME_TRANS -1 /*transition is the same as "default" entry for state */
-  
-  /* the following percentages are used to tune table compression:
-  
-diff -c ../gen.c ./gen.c
-*** ../gen.c	Thu Jun 28 00:44:28 1990
---- ./gen.c	Mon Jul 16 13:57:32 1990
-***************
-*** 28,37 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/gen.c,v 2.9 90/06/27 23:48:22 vern Exp $ (LBL)";
-  #endif
-  
-! #include "flexdef.h"
-  
-  
-  /* declare functions that have forward references */
---- 28,37 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: gen.c,v 2.9 90/06/27 23:48:22 vern Exp $ (LBL)";
-  #endif
-  
-! #include <flexdef.h>
-  
-  
-  /* declare functions that have forward references */
-***************
-*** 292,298 ****
-  
-  	indent_puts( "{" );
-  
-! 	indent_puts( "if ( yy_lp && yy_lp < yy_accept[yy_current_state + 1] )" );
-  	indent_up();
-  	indent_puts( "{" );
-  	indent_puts( "yy_act = yy_acclist[yy_lp];" );
---- 292,298 ----
-  
-  	indent_puts( "{" );
-  
-! 	indent_puts("if( yy_lp && yy_lp < yy_accept[yy_current_state + 1] )");
-  	indent_up();
-  	indent_puts( "{" );
-  	indent_puts( "yy_act = yy_acclist[yy_lp];" );
-diff -c ../initscan.c ./initscan.c
-*** ../initscan.c	Thu Jun 28 00:44:51 1990
---- ./initscan.c	Mon Jul 16 13:57:33 1990
-***************
-*** 1,7 ****
-  /* A lexical scanner generated by flex */
-  
-  /* scanner skeleton version:
-!  * $Header: /usr/fsys/odin/a/vern/flex/RCS/flex.skel,v 2.13 90/05/26 17:24:13 vern Exp $
-   */
-  
-  #define FLEX_SCANNER
---- 1,7 ----
-  /* A lexical scanner generated by flex */
-  
-  /* scanner skeleton version:
-!  * $Header: flex.skel,v 2.13 90/05/26 17:24:13 vern Exp $
-   */
-  
-  #define FLEX_SCANNER
-***************
-*** 193,199 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/scan.l,v 2.9 90/06/27 23:48:34 vern Exp $ (LBL)";
-  #endif
-  
-  #undef yywrap
---- 193,199 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: scan.l,v 2.9 90/06/27 23:48:34 vern Exp $ (LBL)";
-  #endif
-  
-  #undef yywrap
-diff -c ../libmain.c ./libmain.c
-*** ../libmain.c	Thu Jun 28 00:44:28 1990
---- ./libmain.c	Mon Jul 16 13:57:34 1990
-***************
-*** 1,6 ****
-  /* libmain - flex run-time support library "main" function */
-  
-! /* $Header: /usr/fsys/odin/a/vern/flex/RCS/libmain.c,v 1.2 90/05/26 16:50:08 vern Exp $ */
-  
-  extern int yylex();
-  
---- 1,6 ----
-  /* libmain - flex run-time support library "main" function */
-  
-! /* $Header: libmain.c,v 1.2 90/05/26 16:50:08 vern Exp $ */
-  
-  extern int yylex();
-  
-diff -c ../main.c ./main.c
-*** ../main.c	Thu Jun 28 00:44:29 1990
---- ./main.c	Mon Jul 16 13:57:34 1990
-***************
-*** 34,44 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/main.c,v 2.9 90/06/27 23:48:24 vern Exp $ (LBL)";
-  #endif
-  
-  
-! #include "flexdef.h"
-  
-  static char flex_version[] = "2.3";
-  
---- 34,44 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: main.c,v 2.9 90/06/27 23:48:24 vern Exp $ (LBL)";
-  #endif
-  
-  
-! #include <flexdef.h>
-  
-  static char flex_version[] = "2.3";
-  
-***************
-*** 97,106 ****
-  char *program_name;
-  
-  #ifndef SHORT_FILE_NAMES
-  static char *outfile = "lex.yy.c";
-! #else
-  static char *outfile = "lexyy.c";
-! #endif
-  static int outfile_created = 0;
-  static int use_stdout;
-  static char *skelname = NULL;
---- 97,110 ----
-  char *program_name;
-  
-  #ifndef SHORT_FILE_NAMES
-+ #ifdef OSVS
-+ static char *outfile = "ctro01";
-+ #else	/* not OSVS */
-  static char *outfile = "lex.yy.c";
-! #endif  /* not OSVS */
-! #else  /* SHORT_FILE_NAMES */
-  static char *outfile = "lexyy.c";
-! #endif  /* SHORT_FILE_NAMES */
-  static int outfile_created = 0;
-  static int use_stdout;
-  static char *skelname = NULL;
-***************
-*** 209,216 ****
---- 213,222 ----
-  	else if ( fclose( temp_action_file ) )
-  	    flexfatal( "error occurred when closing temporary action file" );
-  
-+ #ifndef OSVS
-  	else if ( unlink( action_file_name ) )
-  	    flexfatal( "error occurred when deleting temporary action file" );
-+ #endif
-  	}
-  
-      if ( status != 0 && outfile_created )
-***************
-*** 221,228 ****
---- 227,236 ----
-  	else if ( fclose( stdout ) )
-  	    flexfatal( "error occurred when closing output file" );
-  
-+ #ifndef OSVS
-  	else if ( unlink( outfile ) )
-  	    flexfatal( "error occurred when deleting output file" );
-+ #endif
-  	}
-  
-      if ( backtrack_report && backtrack_file )
-***************
-*** 574,583 ****
-      if ( backtrack_report )
-  	{
-  #ifndef SHORT_FILE_NAMES
-  	backtrack_file = fopen( "lex.backtrack", "w" );
-! #else
-  	backtrack_file = fopen( "lex.bck", "w" );
-! #endif
-  
-  	if ( backtrack_file == NULL )
-  	    flexerror( "could not create lex.backtrack" );
---- 582,595 ----
-      if ( backtrack_report )
-  	{
-  #ifndef SHORT_FILE_NAMES
-+ #ifdef OSVS
-+ 	backtrack_file = fopen( SYSUT2, "w");
-+ #else   /* not OSVS */
-  	backtrack_file = fopen( "lex.backtrack", "w" );
-! #endif	/* OSVS */
-! #else   /* SHORT_FILE_NAMES  */
-  	backtrack_file = fopen( "lex.bck", "w" );
-! #endif  /* SHORT_FILE_NAMES */
-  
-  	if ( backtrack_file == NULL )
-  	    flexerror( "could not create lex.backtrack" );
-***************
-*** 597,604 ****
-  	lerrsf( "can't open skeleton file %s", skelname );
-  
-  #ifdef SYS_V
-      action_file_name = tmpnam( NULL );
-! #endif
-  
-      if ( action_file_name == NULL )
-  	{
---- 609,620 ----
-  	lerrsf( "can't open skeleton file %s", skelname );
-  
-  #ifdef SYS_V
-+ #ifndef OSVS
-      action_file_name = tmpnam( NULL );
-! #else	/* OSVS */
-!     action_file_name = SYSUT1;
-! #endif	/* OSVS */
-! #endif	/* SYS_V */
-  
-      if ( action_file_name == NULL )
-  	{
-***************
-*** 609,615 ****
---- 625,636 ----
-  #else
-  	(void) strcpy( temp_action_file_name, "flexXXXXXX.tmp" );
-  #endif
-+ #ifndef OSVS
-  	(void) mktemp( temp_action_file_name );
-+ #else	/* OSVS */
-+ 	/* should never be executed in OSVS as IF should always be false  */
-+ 	(void) strcpy( temp_action_file_name, SYSUT1 ) ;
-+ #endif  /* OSVS */
-  
-  	action_file_name = temp_action_file_name;
-  	}
-diff -c ../misc.c ./misc.c
-*** ../misc.c	Thu Jun 28 00:44:40 1990
---- ./misc.c	Mon Jul 16 13:57:35 1990
-***************
-*** 28,38 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/misc.c,v 2.7 90/06/27 23:48:27 vern Exp $ (LBL)";
-  #endif
-  
-  #include <ctype.h>
-! #include "flexdef.h"
-  
-  
-  /* ANSI C does not guarantee that isascii() is defined */
---- 28,38 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: misc.c,v 2.7 90/06/27 23:48:27 vern Exp $ (LBL)";
-  #endif
-  
-  #include <ctype.h>
-! #include <flexdef.h>
-  
-  
-  /* ANSI C does not guarantee that isascii() is defined */
-***************
-*** 107,113 ****
---- 107,117 ----
-      {
-      while ( *str )
-  	{
-+ #ifdef OSVS
-+ 	if ( ! islower( *str ) )
-+ #else
-  	if ( ! isascii( *str ) || ! islower( *str ) )
-+ #endif
-  	    return ( 0 );
-  	++str;
-  	}
-***************
-*** 130,136 ****
---- 134,144 ----
-      {
-      while ( *str )
-  	{
-+ #ifdef OSVS
-+ 	if ( ! isupper( (char) *str ) )
-+ #else
-  	if ( ! isascii( *str ) || ! isupper( (char) *str ) )
-+ #endif
-  	    return ( 0 );
-  	++str;
-  	}
-***************
-*** 182,188 ****
---- 190,200 ----
-  register int c;
-  
-      {
-+ #ifdef OSVS
-+     return ( isupper( c ) ? (Char) tolower( c ) : (Char) c );
-+ #else
-      return ( (isascii( c ) && isupper( c )) ? tolower( c ) : c );
-+ #endif
-      }
-  
-  
-***************
-*** 204,210 ****
-      for ( c = str; *c; ++c )
-  	;
-  
-!     copy = malloc( (unsigned) ((c - str + 1) * sizeof( char )) );
-  
-      if ( copy == NULL )
-  	flexfatal( "dynamic memory failure in copy_string()" );
---- 216,222 ----
-      for ( c = str; *c; ++c )
-  	;
-  
-!     copy = (char *) malloc( (unsigned) ((c - str + 1) * sizeof( char )) );
-  
-      if ( copy == NULL )
-  	flexfatal( "dynamic memory failure in copy_string()" );
-***************
-*** 392,403 ****
---- 404,421 ----
-  
-  #ifndef MS_DOS
-  #ifndef VMS
-+ #ifndef OSVS
-  #include <sys/types.h>
-+ #endif  /* OSVS */
-  #else
-  #include <types.h>
-  #endif
-  #endif
-  
-+ #ifdef OSVS
-+ #include <time.h>
-+ #endif /* OSVS */
-+ 
-  #ifdef MS_DOS
-  #include <time.h>
-  typedef long time_t;
-***************
-*** 615,621 ****
---- 633,643 ----
-  	    if ( array[1] == 'x' )
-  		++sptr;
-  
-+ #ifdef OSVS
-+ 	    while ( isdigit( array[sptr] ) )
-+ #else
-  	    while ( isascii( array[sptr] ) && isdigit( array[sptr] ) )
-+ #endif
-  		/* don't increment inside loop control because if
-  		 * isdigit() is a macro it will expand it to two
-  		 * increments ...
-Only in ..: new
-diff -c ../nfa.c ./nfa.c
-*** ../nfa.c	Thu Jun 28 00:44:40 1990
---- ./nfa.c	Mon Jul 16 13:57:36 1990
-***************
-*** 28,37 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/nfa.c,v 2.6 90/06/27 23:48:29 vern Exp $ (LBL)";
-  #endif
-  
-! #include "flexdef.h"
-  
-  
-  /* declare functions that have forward references */
---- 28,37 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: nfa.c,v 2.6 90/06/27 23:48:29 vern Exp $ (LBL)";
-  #endif
-  
-! #include <flexdef.h>
-  
-  
-  /* declare functions that have forward references */
-***************
-*** 110,116 ****
-      {
-      int sym, tsp1, tsp2, anum, ns;
-  
-!     fprintf( stderr, "\n\n********** beginning dump of nfa with start state %d\n",
-  	     state1 );
-  
-      /* we probably should loop starting at firstst[state1] and going to
---- 110,116 ----
-      {
-      int sym, tsp1, tsp2, anum, ns;
-  
-!     fprintf(stderr,"\n\n********* beginning dump of nfa with start state %d\n",
-  	     state1 );
-  
-      /* we probably should loop starting at firstst[state1] and going to
-diff -c ../parse.y ./parse.y
-*** ../parse.y	Thu Jun 28 00:44:40 1990
---- ./parse.y	Mon Jul 16 13:57:36 1990
-***************
-*** 32,45 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/parse.y,v 2.7 90/06/27 23:48:31 vern Exp $ (LBL)";
-  #endif
-  
-! #include "flexdef.h"
-  
-  int pat, scnum, eps, headcnt, trailcnt, anyccl, lastchar, i, actvp, rulelen;
-  int trlcontxt, xcluflg, cclsorted, varlength, variable_trail_rule;
-  Char clower();
-  
-  static int madeany = false;  /* whether we've made the '.' character class */
-  int previous_continued_action;	/* whether the previous rule's action was '|' */
---- 32,47 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: parse.y,v 2.7 90/06/27 23:48:31 vern Exp $ (LBL)";
-  #endif
-  
-! #include <flexdef.h>
-  
-  int pat, scnum, eps, headcnt, trailcnt, anyccl, lastchar, i, actvp, rulelen;
-  int trlcontxt, xcluflg, cclsorted, varlength, variable_trail_rule;
-  Char clower();
-+ void build_eof_action();
-+ void yyerror();
-  
-  static int madeany = false;  /* whether we've made the '.' character class */
-  int previous_continued_action;	/* whether the previous rule's action was '|' */
-diff -c ../scan.l ./scan.l
-*** ../scan.l	Thu Jun 28 00:44:41 1990
---- ./scan.l	Mon Jul 16 13:57:37 1990
-***************
-*** 30,42 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/scan.l,v 2.9 90/06/27 23:48:34 vern Exp $ (LBL)";
-  #endif
-  
-  #undef yywrap
-  
-! #include "flexdef.h"
-! #include "parse.h"
-  
-  #define ACTION_ECHO fprintf( temp_action_file, "%s", yytext )
-  #define MARK_END_OF_PROLOG fprintf( temp_action_file, "%%%% end of prolog\n" );
---- 30,42 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: scan.l,v 2.9 90/06/27 23:48:34 vern Exp $ (LBL)";
-  #endif
-  
-  #undef yywrap
-  
-! #include <flexdef.h>
-! #include <parse.h>
-  
-  #define ACTION_ECHO fprintf( temp_action_file, "%s", yytext )
-  #define MARK_END_OF_PROLOG fprintf( temp_action_file, "%%%% end of prolog\n" );
-diff -c ../sym.c ./sym.c
-*** ../sym.c	Thu Jun 28 00:44:41 1990
---- ./sym.c	Mon Jul 16 13:57:37 1990
-***************
-*** 28,37 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/sym.c,v 2.4 90/06/27 23:48:36 vern Exp $ (LBL)";
-  #endif
-  
-! #include "flexdef.h"
-  
-  
-  /* declare functions that have forward references */
---- 28,37 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: sym.c,v 2.4 90/06/27 23:48:36 vern Exp $ (LBL)";
-  #endif
-  
-! #include <flexdef.h>
-  
-  
-  /* declare functions that have forward references */
-diff -c ../tblcmp.c ./tblcmp.c
-*** ../tblcmp.c	Thu Jun 28 00:44:41 1990
---- ./tblcmp.c	Mon Jul 16 13:57:38 1990
-***************
-*** 28,37 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/tblcmp.c,v 2.5 90/06/27 23:48:38 vern Exp $ (LBL)";
-  #endif
-  
-! #include "flexdef.h"
-  
-  
-  /* declarations for functions that have forward references */
---- 28,37 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: tblcmp.c,v 2.5 90/06/27 23:48:38 vern Exp $ (LBL)";
-  #endif
-  
-! #include <flexdef.h>
-  
-  
-  /* declarations for functions that have forward references */
-diff -c ../yylex.c ./yylex.c
-*** ../yylex.c	Thu Jun 28 00:44:41 1990
---- ./yylex.c	Mon Jul 16 13:57:38 1990
-***************
-*** 28,39 ****
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/yylex.c,v 2.5 90/06/27 23:48:40 vern Exp $ (LBL)";
-  #endif
-  
-  #include <ctype.h>
-! #include "flexdef.h"
-! #include "parse.h"
-  
-  
-  /* ANSI C does not guarantee that isascii() is defined */
---- 28,39 ----
-  
-  #ifndef lint
-  static char rcsid[] =
-!     "@(#) $Header: yylex.c,v 2.5 90/06/27 23:48:40 vern Exp $ (LBL)";
-  #endif
-  
-  #include <ctype.h>
-! #include <flexdef.h>
-! #include <parse.h>
-  
-  
-  /* ANSI C does not guarantee that isascii() is defined */
-***************
-*** 180,186 ****
---- 180,190 ----
-  			break;
-  
-  		    default:
-+ #ifdef OSVS
-+ 			if ( ! isprint( yylval ) )
-+ #else
-  			if ( ! isascii( yylval ) || ! isprint( yylval ) )
-+ #endif
-  			    fprintf( stderr, "\\%.3o", yylval );
-  			else
-  			    (void) putc( yylval, stderr );
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/MVS/fixit.l b/WebKitTools/android/flex-2.5.4a/MISC/MVS/fixit.l
deleted file mode 100644
index 3e15b6f..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/MVS/fixit.l
+++ /dev/null
@@ -1,138 +0,0 @@
-%{
-/* fixit.l - convert long external names to names of 8-bytes or less */
-/* 
- * This program is included to satisfy "dumb" compilers/linkers which 
- * do not know about externals of names longer than 8 bytes.
- *
- *  Steven W. Layten
- *  Chemical Abstracts Service
- *  PO BOX 3012
- *  Columbus, OH 43210
- */
-%}
-%%
-"action_file_name"			printf("actfilnm");
-"action_out"				printf("actnout");
-"add_accept"				printf("addacpt");
-"all_lower"				printf("alllower");
-"all_upper"				printf("allupper");
-"allocate_array"			printf("allocarr");
-"assoc_rule"				printf("asscrule");
-"backtrack_file"			printf("bktrkfil");
-"backtrack_report"			printf("bktrkrep");
-"bol_needed"				printf("bol_nded");
-"build_eof_action"			printf("bldeofac");
-"cclinstal"				printf("cclnstal");
-"ccllookup"				printf("ccllookp");
-"cclnegate"				printf("cclnegat");
-"cclsorted"				printf("cclsrted");
-"check_for_backtracking"		printf("ck4bktrk");
-"check_trailing_context"		printf("cktrlcnt");
-"continued_action"			printf("cntdactn");
-"copy_string"				printf("copystrn");
-"copy_unsigned_string"			printf("cpunsstr");
-"copyright"				printf("cpyrght");
-"copysingl"				printf("copysngl");
-"current_max_ccl_tbl_size"		printf("c_mx_ccl");
-"current_max_dfa_size"			printf("c_mx_dfa");
-"current_max_dfas"			printf("c_mxdfas");
-"current_max_rules"			printf("curmxrls");
-"current_max_scs"			printf("c_mx_scs");
-"current_max_template_xpairs"		printf("c_mx_tmp");
-"current_max_xpairs"			printf("c_mx_xpr");
-"current_maxccls"			printf("c_mxccls");
-"current_mns"				printf("curr_mns");
-"current_state_type"			printf("cursttyp");
-"dataflush"				printf("datflush");
-"dfaacc_union"				printf("dfacunin");
-"do_indent"				printf("do_indnt");
-"dump_associated_rules"			printf("dmpasrl");
-"dump_transitions"			printf("dmptrns");
-"dupmachine"				printf("dupmach");
-"ecs_from_xlation"			printf("ecsfrmxt");
-"end_of_buffer_state"			printf("eobstate");
-"epsclosure"				printf("epsclos");
-"expand_nxt_chk"			printf("expnxtck");
-"find_table_space"			printf("fndtblsp");
-"finish_rule"				printf("fnshrule");
-"firstfree"				printf("firstfre");
-"firstprot"				printf("firstprt");
-"flex_gettime"				printf("flxgettm");
-"flexerror"				printf("flxerror");
-"flexfatal"				printf("flxfatal");
-"format_pinpoint_message"		printf("fmtptmsg");
-"gen_NUL_trans"				printf("gnNULtrn");
-"gen_backtracking"			printf("gnbktrkg");
-"gen_bt_action"				printf("gnbtactn");
-"gen_find_action"			printf("gnfndact");
-"gen_line_dirs"				printf("gnlindir");
-"gen_next_compressed_state"		printf("gnnxcste");
-"gen_next_match"			printf("gnnxmtch");
-"gen_next_state"			printf("gnnxtst");
-"gen_start_state"			printf("gnstrtst");
-"hash_entry"				printf("hshentry");
-"hashfunct"				printf("hshfct");
-"increase_max_dfas"			printf("incmxdfa");
-"indent_put2s"				printf("indput2s");
-"indent_puts"				printf("indputs");
-"infilename"				printf("infilnam");
-"input_files"				printf("inp_fles");
-"interactive"				printf("intractv");
-"line_directive_out"			printf("lndirout");
-"link_machines"				printf("lnkmchns");
-"list_character_set"			printf("lst_cset");
-"make_tables"				printf("maketbls");
-"mark_beginning_as_normal"		printf("mkbgnorm");
-"mktemplate"				printf("mktmplat");
-"num_backtracking"			printf("nbktrckg");
-"num_input_files"			printf("ninfiles");
-"num_reallocs"				printf("numraloc");
-"num_rules"				printf("numrules");
-"num_xlations"				printf("nuxlatns");
-"numsnpairs"				printf("numnpair");
-"output_file_name"			printf("outfilnm");
-"peakpairs"				printf("peakpair");
-"performance_report"			printf("perf_rep");
-"pinpoint_message"			printf("pptmsg");
-"place_state"				printf("plcstate");
-"previous_continued_action"		printf("prvctdan");
-"printstats"				printf("prtstats");
-"program_name"				printf("pgm_name");
-"protcomst"				printf("prtcomst");
-"readable_form"				printf("rdblefrm");
-"real_reject"				printf("realrjct");
-"reallocate_array"			printf("rallocar");
-"reject_really_used"			printf("rjctused");
-"rule_linenum"				printf("rulelnno");
-"rule_type"				printf("ruletype");
-"set_input_file"			printf("stinpfle");
-"set_up_initial_allocations"		printf("setupia");
-"starttime"				printf("startime");
-"state_type"				printf("ste_type");
-"symfollowset"				printf("symfollo");
-"sympartition"				printf("sympartn");
-"syntaxerror"				printf("syntxerr");
-"temp_action_file"			printf("tmpactfl");
-"todo_head"				printf("todohead");
-"todo_next"				printf("todonext");
-"transchar"				printf("trnschar");
-"transition_struct_out"			printf("trnstout");
-"trlcontxt"				printf("trlcntxt");
-"variable_trail_rule"			printf("vtrailrl");
-"variable_trailing_context_rules"	printf("vtrlctrl");
-"varlength"				printf("varlngth");
-"yy_create_buffer"			printf("yycrbffr");
-"yy_delete_buffer"			printf("yydlbffr");
-"yy_init_buffer"			printf("yyinbffr");
-"yy_load_buffer_state"			printf("yyldbfst");
-"yy_switch_to_buffer"			printf("yyswtobf");
-"yyerrflag"				printf("yyerrflg");
-"yymore_really_used"			printf("yymrreus");
-"yymore_used"				printf("yymrused");
-"yyrestart"				printf("yyrestrt");
-.					ECHO;
-%%
-main()
-{
-    yylex();
-}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/MVS/initscan-mvs.c b/WebKitTools/android/flex-2.5.4a/MISC/MVS/initscan-mvs.c
deleted file mode 100644
index 93c8591..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/MVS/initscan-mvs.c
+++ /dev/null
@@ -1,2672 +0,0 @@
-/* A lexical scanner generated by flex */
- 
-/* scanner skeleton version:
- * $Header: flex.skel,v 2.13 90/05/26 17:24:13 ve
- */
- 
-#define FLEX_SCANNER
- 
-#include <stdio.h>
- 
-#ifdef __STDC__
- 
-#ifndef DONT_HAVE_STDLIB_H
-#include <stdlib.h>
-#else
-void *malloc( unsigned );
-void free( void* );
-#endif
- 
-#define YY_USE_PROTOS
-#define YY_USE_CONST
-#endif
- 
- 
-/* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */
-#ifdef c_plusplus
-#ifndef __cplusplus
-#define __cplusplus
-#endif
-#endif
- 
- 
-#ifdef __cplusplus
- 
-#ifndef __STDC__
-#include <stdlib.h>
-#endif
- 
-#include <osfcn.h>
- 
-/* use prototypes in function declarations */
-#define YY_USE_PROTOS
- 
-/* the "const" storage-class-modifier is valid */
-#define YY_USE_CONST
- 
-#endif
- 
- 
-#ifdef __TURBOC__
-#define YY_USE_CONST
-#endif
- 
- 
-#ifndef YY_USE_CONST
-#define const
-#endif
- 
- 
-#ifdef YY_USE_PROTOS
-#define YY_PROTO(proto) proto
-#else
-#define YY_PROTO(proto) ()
-/* there's no standard place to get these definitions */
-char *malloc();
-int free();
-int read();
-#endif
- 
- 
-/* amount of stuff to slurp up with each read */
-#ifndef YY_READ_BUF_SIZE
-#define YY_READ_BUF_SIZE 8192
-#endif
- 
-/* returned upon end-of-file */
-#define YY_END_TOK 0
- 
-/* copy whatever the last rule matched to the standard output */
- 
-/* cast to (char *) is because for 8-bit chars, yytext is (unsigned char *) */
-/* this used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite()
- */
-#define ECHO (void) fwrite( (char *) yytext, yyleng, 1, yyout )
- 
-/* gets input and stuffs it into "buf".  number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#define YY_INPUT(buf,result,max_size) \
-        if ( (result = read( fileno(yyin), (char *) buf, max_size )) < 0 ) \
-            YY_FATAL_ERROR( "read() in flex scanner failed" );
-#define YY_NULL 0
- 
-/* no semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#define yyterminate() return ( YY_NULL )
- 
-/* report a fatal error */
- 
-/* The funky do-while is used to turn this macro definition into
- * a single C statement (which needs a semi-colon terminator).
- * This avoids problems with code like:
- *
- *      if ( something_happens )
- *              YY_FATAL_ERROR( "oops, the something happened" );
- *      else
- *              everything_okay();
- *
- * Prior to using the do-while the compiler would get upset at the
- * "else" because it interpreted the "if" statement as being all
- * done when it reached the ';' after the YY_FATAL_ERROR() call.
- */
- 
-#define YY_FATAL_ERROR(msg) \
-        do \
-                { \
-                (void) fputs( msg, stderr ); \
-                (void) putc( '\n', stderr ); \
-                exit( 1 ); \
-                } \
-        while ( 0 )
- 
-/* default yywrap function - always treat EOF as an EOF */
-#define yywrap() 1
- 
-/* enter a start condition.  This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN
- */
-#define BEGIN yy_start = 1 + 2 *
- 
-/* action number for EOF rule of a given start state */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
- 
-/* special action meaning "start processing a new file" */
-#define YY_NEW_FILE \
-        do \
-                { \
-                yyinbffr( yy_current_buffer, yyin ); \
-                yyldbfst(); \
-                } \
-        while ( 0 )
- 
-/* default declaration of generated scanner - a define so the user can
- * easily add parameters
- */
-#define YY_DECL int yylex YY_PROTO(( void ))
- 
-/* code executed at the end of each rule */
-#define YY_BREAK break;
- 
-#define YY_END_OF_BUFFER_CHAR 0
- 
-#ifndef YY_BUF_SIZE
-#define YY_BUF_SIZE (YY_READ_BUF_SIZE * 2) /* size of default input buffer */
-#endif
- 
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
- 
-#define YY_CHAR unsigned char
-# line 1 "<stdin>"
-#define INITIAL 0
-/* scan.l - scanner for flex input */
-# line 5 "<stdin>"
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Vern Paxson.
- *
- * The United States Government has rights in this work pursuant
- * to contract no. DE-AC03-76SF00098 between the United States
- * Department of Energy and the University of California.
- *
- * Redistribution and use in source and binary forms with or without
- * modification are permitted provided that: (1) source distributions retain
- * this entire copyright notice and comment, and (2) distributions including
- * binaries display the following acknowledgement:  ``This product includes
- * software developed by the University of California, Berkeley and its
- * contributors'' in the documentation or other materials provided with the
- * distribution and in all advertising materials mentioning features or use
- * of this software.  Neither the name of the University nor the names of
- * its contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
- 
-#ifndef lint
-static char rcsid[] =
-    "@(#) $Header: scan.l,v 2.9 90/06/27 23:48:34 vern Exp $ (LBL)";
-#endif
- 
-#undef yywrap
- 
-#include <flexdef.h>
-#include <parse.h>
- 
-#define ACTION_ECHO fprintf( tmpactfl, "%s", yytext )
-#define MARK_END_OF_PROLOG fprintf( tmpactfl, "%%%% end of prolog\n" );
- 
-#undef YY_DECL
-#define YY_DECL \
-        int flexscan()
- 
-#define RETURNCHAR \
-        yylval = yytext[0]; \
-        return ( CHAR );
- 
-#define RETURNNAME \
-        (void) strcpy( nmstr, (char *) yytext ); \
-        return ( NAME );
- 
-#define PUT_BACK_STRING(str, start) \
-        for ( i = strlen( (char *) (str) ) - 1; i >= start; --i ) \
-            unput((str)[i])
- 
-#define CHECK_REJECT(str) \
-        if ( allupper( str ) ) \
-            reject = true;
- 
-#define CHECK_YYMORE(str) \
-        if ( alllower( str ) ) \
-            yymrused = true;
-#define SECT2 1
-#define SECT2PROLOG 2
-#define SECT3 3
-#define CODEBLOCK 4
-#define PICKUPDEF 5
-#define SC 6
-#define CARETISBOL 7
-#define NUM 8
-#define QUOTE 9
-#define FIRSTCCL 10
-#define CCL 11
-#define ACTION 12
-#define RECOVER 13
-#define BRACEERROR 14
-#define C_COMMENT 15
-#define ACTION_COMMENT 16
-#define ACTION_STRING 17
-#define PERCENT_BRACE_ACTION 18
-#define USED_LIST 19
-#define CODEBLOCK_2 20
-#define XLATION 21
-# line 84 "<stdin>"
- 
-/* done after the current pattern has been matched and before the
- * corresponding action - sets up yytext
- */
-#define YY_DO_BEFORE_ACTION \
-        yytext = yy_bp; \
-	yyleng = yy_cp - yy_bp; \
-        yy_hold_char = *yy_cp; \
-        *yy_cp = '\0'; \
-        yy_c_buf_p = yy_cp;
- 
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
- 
-/* return all but the first 'n' matched characters back to the input stream */
-#define yyless(n) \
-        do \
-                { \
-                /* undo effects of setting up yytext */ \
-                *yy_cp = yy_hold_char; \
-                yy_c_buf_p = yy_cp = yy_bp + n; \
-                YY_DO_BEFORE_ACTION; /* set up yytext again */ \
-                } \
-        while ( 0 )
- 
-#define unput(c) yyunput( c, yytext )
- 
- 
-struct yy_buffer_state
-    {
-    FILE *yy_input_file;
- 
-    YY_CHAR *yy_ch_buf;         /* input buffer */
-    YY_CHAR *yy_buf_pos;        /* current position in input buffer */
- 
-    /* size of input buffer in bytes, not including room for EOB characters*/
-    int yy_buf_size;
- 
-    /* number of characters read into yy_ch_buf, not including EOB characters */
-    int yy_n_chars;
- 
-    int yy_eof_status;          /* whether we've seen an EOF on this buffer */
-#define EOF_NOT_SEEN 0
-    /* "pending" happens when the EOF has been seen but there's still
-     * some text process
-     */
-#define EOF_PENDING 1
-#define EOF_DONE 2
-    };
- 
-static YY_BUFFER_STATE yy_current_buffer;
- 
-/* we provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state"
- */
-#define YY_CURRENT_BUFFER yy_current_buffer
- 
- 
-/* yy_hold_char holds the character lost when yytext is formed */
-static YY_CHAR yy_hold_char;
- 
-static int yy_n_chars;          /* number of characters read into yy_ch_buf */
- 
- 
- 
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
- 
-#ifndef YY_USER_INIT
-#define YY_USER_INIT
-#endif
- 
-extern YY_CHAR *yytext;
-extern int yyleng;
-extern FILE *yyin, *yyout;
- 
-YY_CHAR *yytext;
-int yyleng;
- 
-FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
- 
-#define YY_END_OF_BUFFER 121
-typedef int yy_ste_type;
-static const short int yy_accept[341] =
-    {   0,
-        0,    0,    0,    0,    0,    0,  119,  119,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,  121,   19,    7,   18,   19,   16,
-        1,   17,   19,   19,   15,   19,   67,   59,   60,   66,
-       51,   67,   53,   67,   67,   67,   50,   49,   52,   67,
-      120,   47,  119,  119,   28,   29,   28,   28,   28,   28,
-       31,   30,   32,   73,  120,   69,   72,   70,   74,   88,
-       89,   86,   87,   85,   75,   77,   76,   75,   81,   81,
- 
-       80,   81,   83,   83,   84,   83,   99,  104,  105,  100,
-      105,  103,  100,  100,   97,   98,  120,   33,   91,   90,
-       22,   24,   23,  107,  109,  108,  111,  113,  114,  115,
-       95,   95,   96,   95,   95,   95,   95,   38,   35,   34,
-       38,   38,   44,   42,   45,   44,   44,   41,   41,   41,
-       41,   40,    7,   18,    0,   16,    1,   17,    3,   14,
-        8,    0,   12,    4,    0,    0,    5,    0,   15,    0,
-        2,   59,   60,    0,    0,    0,   56,    0,    0,   55,
-       55,   54,  117,  117,  117,   50,   49,   63,   50,    0,
-       47,   46,  119,  119,   28,   28,   28,   28,   28,   31,
- 
-       30,   72,   71,   85,   78,   79,  118,  118,  118,   82,
-       99,  101,  100,    0,  102,    0,  100,  100,    0,   33,
-       22,   20,  107,  106,  111,  112,   95,   95,   95,   92,
-       95,   95,   95,   38,   35,   38,   38,   42,    0,   43,
-       43,   43,   42,   40,    0,   13,   14,    8,    8,    0,
-       12,    4,    0,    0,    0,    5,    0,    6,    0,   58,
-       57,    0,   64,    0,    0,   55,   55,   65,  117,  117,
-       63,   28,   28,   28,   25,    0,  118,  118,  100,  100,
-        0,   21,   92,   92,   95,   95,   38,   38,    0,   39,
-       43,   43,    0,   11,    4,    0,   11,    0,    0,    5,
- 
-        0,    0,    0,  117,   28,   28,  118,  100,  100,   95,
-       95,   38,   38,   43,    0,    9,    0,    0,    0,   28,
-       28,  100,  100,   95,   95,   38,   38,    0,    0,   26,
-       27,   93,   94,   93,   94,   36,   37,   10,   62,    0
-    } ;
- 
-static const YY_CHAR yy_ec[256] =
-    {   0,
-        1,    1,    1,    1,    2,    1,    1,    1,    1,    1,
-        1,    3,    1,    1,    1,    1,    1,    1,    1,    1,
-        4,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    5,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    6,    7,    6,    6,    8,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        9,   10,    6,    1,   11,   12,   13,    1,    1,    1,
- 
-        1,    1,    1,    1,    1,    1,   14,   15,   16,   17,
-        6,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,   18,    1,   19,    1,   20,    1,   21,   22,
-       23,   24,   25,   26,   16,   16,   16,   16,   16,   16,
-       16,   16,   16,   16,   27,   28,   16,   29,   30,   31,
-       28,   16,   32,   16,   16,   16,   16,   16,   16,   16,
-       16,   33,   34,   35,   16,   16,   36,   37,   16,    1,
-        1,    1,   38,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,   39,    1,
-        1,   40,   21,   22,   23,   24,   25,   26,   16,   16,
- 
-       16,    1,    1,    1,    1,    1,    1,   41,   27,   28,
-       16,   29,   30,   31,   28,   16,   32,    1,    1,    1,
-        1,    1,    1,   42,    1,   33,   34,   35,   16,   16,
-       36,   37,   16,    1,    1,    1,    1,    1,    1,   43,
-       43,   43,   43,   43,   43,   43,   43,   43,   43,    1,
-        1,    1,    1,    1,    1
-    } ;
- 
-static const short int yy_base[404] =
-    {   0,
-        0,   43,   85,  126, 1573, 1572, 1571, 1570,  168, 1558,
-       97,  104,  211,    0, 1544, 1543,   99,  106,  118,  251,
-      252,  254,  112,  114,  296,    0, 1549, 1548,  107,  111,
-      140,  151,  153,  155,  253,  336,  378,    0,  339,  420,
-        0,    0,  424,  465, 1550, 3243,  257, 3243, 1515,    0,
-      265, 3243, 1538,  494,    0, 1540, 3243,  272, 3243, 3243,
-     1495,  277, 3243, 1459,  534,   61,  343, 3243, 3243,   81,
-     1496,    0, 1495, 3243,    0, 3243,    0, 1473, 1443, 1438,
-        0,  281, 3243, 3243, 3243, 3243,    0, 1467, 3243, 3243,
-     3243, 3243, 3243, 1434, 3243, 3243, 3243,   76, 3243, 1463,
- 
-     3243,  242, 3243,    0, 3243,  314,    0, 3243, 1464,    0,
-      330, 3243, 1448,  745, 3243, 3243,  777, 3243, 3243, 3243,
-        0, 3243,  767,    0, 3243,  766,    0, 3243, 3243,    0,
-        0,  350, 3243,  737,    0,  752,  739,    0,  286, 3243,
-      750,  737, 3243,  357, 3243,  739,  318, 3243,  428,  738,
-      327,  728,  364, 3243,  432,    0,  438, 3243, 3243,  372,
-      442,  765,  446,    0,  451,   84,    0,  765,    0,  764,
-     3243,  457, 3243,  763,  718,  732, 3243,  434,  438,    0,
-      566, 3243, 3243,    0,  712,  480, 3243,    0, 3243,  750,
-        0, 3243,  749, 3243,    0,    0,  725,  722,  609,    0,
- 
-      484,    0, 3243,  707, 3243, 3243, 3243,    0,  706, 3243,
-        0, 3243,    0,  456, 3243,    0,  721,  718,  742, 3243,
-        0,  741,    0, 3243,    0, 3243,    0,  488,  703,  652,
-        0,  709,  706,    0,  494,  707,  704,  499,  508, 3243,
-        0,  689,  694,  688,  581, 3243,  518,    0,  603,  725,
-      698,    0,  702,  693,  697,    0,  706, 3243,  705, 3243,
-     3243,  671, 3243,  717,  669,    0,    0, 3243,    0,  655,
-        0,  631,  573,    0, 3243,  577,    0,  537,  554,  507,
-      529, 3243,    0,    0,  507,  500,  493,  485,  711, 3243,
-        0,  471,  502, 3243,    0,  715, 3243,  472,  476,    0,
- 
-      468,  740,  682, 3243,  469,  447, 3243,  455,  432,  440,
-      426,  427,  414, 3243,  413, 3243,  415,  684,  688,  339,
-      339,  258,  265,  238,  142,  128,  133,  121,  126,    0,
-        0,    0,    0,    0,    0,    0,    0, 3243, 3243, 3243,
-      783,  826,  869,  912,  955,  998, 1041, 1084, 1127, 1170,
-     1213, 1256, 1299, 1342, 1385, 1428, 1460, 1503, 1535, 1578,
-     1621, 1664, 1707, 1750, 1793, 1836, 1868, 1911, 1943, 1986,
-     2029, 2072, 2115, 2147, 2190, 2233, 2276, 2319, 2362, 2405,
-     2448, 2480, 2523, 2566, 2609, 2637, 2659, 2696, 2739, 2782,
-     2805, 2848, 2871, 2914, 2937, 2980, 3012, 3044, 3067, 3110,
- 
-     3133, 3176, 3199
-    } ;
- 
-static const short int yy_def[404] =
-    {   0,
-      340,  340,  341,  341,  342,  342,  343,  343,  340,    9,
-      344,  344,  340,   13,  345,  345,  346,  346,  347,  347,
-      348,  348,  349,  349,  340,   25,  350,  350,  345,  345,
-      351,  351,  352,  352,  353,  353,  340,   37,  354,  354,
-       37,   37,  355,  356,  340,  340,  340,  340,  340,  357,
-      340,  340,  340,  358,  359,  360,  340,  340,  340,  340,
-      340,  340,  340,  361,  340,  362,  340,  340,  340,  340,
-      363,  364,  365,  340,  366,  340,  367,  367,  367,  366,
-      368,  340,  340,  340,  340,  340,  369,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  362,  340,  370,
- 
-      340,  371,  340,  372,  340,  362,  373,  340,  340,  374,
-      375,  340,  374,  374,  340,  340,  376,  340,  340,  340,
-      377,  340,  340,  378,  340,  340,  379,  340,  340,  380,
-      381,  381,  340,  381,  382,  382,  382,  383,  340,  340,
-      383,  383,  340,  340,  340,  340,  384,  340,  340,  340,
-      384,  340,  340,  340,  340,  357,  340,  340,  340,  340,
-      385,  340,  340,  386,  340,  340,  387,  388,  359,  360,
-      340,  340,  340,  389,  340,  340,  340,  361,  361,  390,
-      390,  340,  340,  391,  340,  340,  340,  392,  340,  363,
-      364,  340,  365,  340,  366,  367,  367,  367,  340,  368,
- 
-      340,  369,  340,  340,  340,  340,  340,  393,  340,  340,
-      373,  340,  374,  375,  340,  375,  374,  374,  376,  340,
-      377,  394,  378,  340,  379,  340,  381,  381,  381,  340,
-      382,  382,  382,  383,  340,  383,  383,  340,  340,  340,
-      395,  340,  340,  340,  340,  340,  340,  385,  385,  396,
-      340,  397,  396,  340,  340,  398,  388,  340,  389,  340,
-      340,  340,  340,  361,  361,  390,  181,  340,  399,  340,
-      392,  367,  367,  199,  340,  400,  401,  340,  374,  374,
-      394,  340,  230,  402,  382,  382,  383,  383,  340,  340,
-      403,  340,  396,  340,  397,  396,  340,  340,  340,  398,
- 
-      340,  264,  361,  340,  367,  367,  340,  374,  374,  382,
-      382,  383,  383,  340,  340,  340,  340,  361,  361,  367,
-      367,  374,  374,  382,  382,  383,  383,  340,  340,  367,
-      367,  374,  374,  382,  382,  383,  383,  340,  340,    0,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
- 
-      340,  340,  340
-    } ;
- 
-static const short int yy_nxt[3287] =
-    {   0,
-       46,   47,   47,   48,   47,   46,   46,   46,   46,   46,
-       46,   46,   46,   46,   49,   50,   46,   46,   46,   46,
-       50,   50,   50,   50,   50,   50,   50,   50,   50,   50,
-       50,   50,   50,   50,   50,   50,   50,   46,   46,   46,
-       46,   46,   46,   46,   51,   51,   52,   51,   46,   46,
-       46,   46,   46,   46,   46,   53,   46,   54,   55,   46,
-       56,   46,   46,   55,   55,   55,   55,   55,   55,   55,
-       55,   55,   55,   55,   55,   55,   55,   55,   55,   55,
-       46,   46,   46,   46,   46,   46,   58,   58,   59,   58,
-       60,   61,   60,   62,   60,  188,  184,   60,   82,   82,
- 
-       83,   82,   91,  185,   63,   82,   82,   83,   82,   91,
-      119,  184,   92,  254,  119,   85,  255,   85,  185,   92,
-      189,   96,   64,  104,   65,  104,   66,   67,   67,   68,
-       67,   60,   61,   60,   62,   60,   69,   97,   60,   93,
-       70,   94,  339,  122,  338,   63,   93,  120,   94,  123,
-      105,  120,  105,  106,  122,  106,  125,  337,  125,   98,
-      123,  336,  126,   64,  126,   65,  335,   66,   75,   75,
-       75,   76,   75,   75,   75,   75,   75,   75,   75,   75,
-       75,   75,   75,   77,   75,   75,   75,   75,   77,   77,
-       77,   77,   77,   77,   77,   77,   77,   77,   77,   78,
- 
-       77,   77,   77,   77,   79,   75,   75,   75,   75,   75,
-       75,   84,   84,   84,   85,   84,   84,   84,   84,   84,
-       84,   84,   84,   84,   86,   84,   87,   88,   84,   84,
-       84,   87,   87,   87,   87,   87,   87,   87,   87,   87,
-       87,   87,   87,   87,   87,   87,   87,   87,   84,   84,
-       84,   84,   84,   84,   96,   85,  128,   85,  153,  153,
-      154,  153,  100,  101,  100,  101,  157,  157,  158,  157,
-       97,  334,  129,  172,  172,  173,  172,  208,  177,  174,
-      177,  177,  201,  201,  209,  201,  175,  235,  235,  333,
-      235,  332,   98,  102,  130,  102,  107,  107,  107,  108,
- 
-      107,  107,  107,  107,  107,  107,  107,  107,  109,  107,
-      107,  110,  107,  107,  111,  112,  110,  110,  110,  110,
-      110,  110,  110,  110,  110,  110,  110,  113,  110,  110,
-      110,  110,  114,  107,  107,  115,  116,  107,  107,  128,
-      139,  139,  140,  139,  186,  186,  187,  186,  215,  184,
-      174,  228,  228,  241,  228,  129,  185,  175,  238,  238,
-      242,  238,  241,  331,  229,  153,  153,  154,  153,  242,
-      141,  216,  330,  247,  247,  142,  247,  130,  131,  132,
-      132,  133,  132,  131,  131,  131,  131,  131,  131,  131,
-      131,  131,  134,  135,  131,  131,  131,  131,  135,  135,
- 
-      135,  135,  135,  135,  135,  135,  135,  135,  135,  136,
-      135,  135,  135,  135,  137,  131,  131,  131,  131,  131,
-      131,  139,  139,  140,  139,  144,  144,  145,  144,  243,
-      243,  329,  243,  245,  245,  246,  245,  328,  146,  157,
-      157,  158,  157,  249,  249,  327,  249,  251,  251,  326,
-      251,  141,  245,  245,  246,  253,  142,  325,  172,  172,
-      173,  172,  324,  323,  174,  147,  149,  149,  145,  149,
-      244,  175,  263,  264,  215,  179,  178,  322,  321,  150,
-      265,  186,  186,  187,  186,  201,  201,  174,  201,  228,
-      228,  320,  228,  317,  175,  235,  235,  216,  235,  316,
- 
-      238,  238,  229,  238,  315,  294,  151,  152,  161,  289,
-      289,  290,  289,  240,  162,  313,  163,  312,  162,  247,
-      247,  162,  247,  162,  162,  163,  164,  165,  166,  167,
-      311,  310,  282,  168,  180,  180,  180,  309,  180,  180,
-      180,  180,  180,  180,  180,  180,  180,  180,  180,  181,
-      180,  180,  180,  180,  181,  181,  181,  181,  181,  181,
-      181,  181,  181,  181,  181,  181,  181,  181,  181,  181,
-      181,  180,  180,  180,  180,  180,  182,  267,  308,  207,
-      275,  267,  245,  245,  246,  245,  267,  267,  267,  267,
-      267,  267,  267,  267,  267,  267,  267,  267,  267,  267,
- 
-      267,  267,  267,  306,  249,  249,  268,  249,  267,  274,
-      274,  274,  275,  274,  274,  274,  274,  274,  274,  274,
-      274,  274,  274,  274,  276,  274,  274,  274,  274,  276,
-      276,  276,  276,  276,  276,  276,  276,  276,  276,  276,
-      276,  276,  276,  276,  276,  276,  274,  274,  274,  274,
-      274,  274,  283,  283,  283,  305,  283,  283,  283,  283,
-      283,  283,  283,  283,  283,  283,  283,  284,  283,  283,
-      283,  283,  284,  284,  284,  284,  284,  284,  284,  284,
-      284,  284,  284,  284,  284,  284,  284,  284,  284,  283,
-      283,  283,  283,  283,  283,  243,  243,  183,  243,  251,
- 
-      251,  301,  251,  296,  296,  297,  296,  263,  260,  258,
-      179,  303,  289,  289,  290,  289,  296,  296,  297,  296,
-      263,  299,  263,  179,  319,  179,  263,  298,  294,  179,
-      244,  292,  288,  287,  286,  285,  244,  302,  302,  302,
-      302,  302,  302,  230,  282,  220,  280,  279,  278,  204,
-      273,  272,  194,  191,  270,  263,  262,  261,  179,  302,
-      318,  318,  318,  318,  318,  318,  260,  171,  258,  250,
-      244,  239,  239,  237,  236,  233,  232,  230,  224,  222,
-      220,  218,  318,   57,   57,   57,   57,   57,   57,   57,
-       57,   57,   57,   57,   57,   57,   57,   57,   57,   57,
- 
-       57,   57,   57,   57,   57,   57,   57,   57,   57,   57,
-       57,   57,   57,   57,   57,   57,   57,   57,   57,   57,
-       57,   57,   57,   57,   57,   57,   71,   71,   71,   71,
-       71,   71,   71,   71,   71,   71,   71,   71,   71,   71,
-       71,   71,   71,   71,   71,   71,   71,   71,   71,   71,
-       71,   71,   71,   71,   71,   71,   71,   71,   71,   71,
-       71,   71,   71,   71,   71,   71,   71,   71,   71,   73,
-       73,   73,   73,   73,   73,   73,   73,   73,   73,   73,
-       73,   73,   73,   73,   73,   73,   73,   73,   73,   73,
-       73,   73,   73,   73,   73,   73,   73,   73,   73,   73,
- 
-       73,   73,   73,   73,   73,   73,   73,   73,   73,   73,
-       73,   73,   81,   81,   81,   81,   81,   81,   81,   81,
-       81,   81,   81,   81,   81,   81,   81,   81,   81,   81,
-       81,   81,   81,   81,   81,   81,   81,   81,   81,   81,
-       81,   81,   81,   81,   81,   81,   81,   81,   81,   81,
-       81,   81,   81,   81,   81,   85,   85,   85,   85,   85,
-       85,   85,   85,   85,   85,   85,   85,   85,   85,   85,
-       85,   85,   85,   85,   85,   85,   85,   85,   85,   85,
-       85,   85,   85,   85,   85,   85,   85,   85,   85,   85,
-       85,   85,   85,   85,   85,   85,   85,   85,   90,   90,
- 
-       90,   90,   90,   90,   90,   90,   90,   90,   90,   90,
-       90,   90,   90,   90,   90,   90,   90,   90,   90,   90,
-       90,   90,   90,   90,   90,   90,   90,   90,   90,   90,
-       90,   90,   90,   90,   90,   90,   90,   90,   90,   90,
-       90,   95,   95,   95,   95,   95,   95,   95,   95,   95,
-       95,   95,   95,   95,   95,   95,   95,   95,   95,   95,
-       95,   95,   95,   95,   95,   95,   95,   95,   95,   95,
-       95,   95,   95,   95,   95,   95,   95,   95,   95,   95,
-       95,   95,   95,   95,   99,   99,   99,   99,   99,   99,
-       99,   99,   99,   99,   99,   99,   99,   99,   99,   99,
- 
-       99,   99,   99,   99,   99,   99,   99,   99,   99,   99,
-       99,   99,   99,   99,   99,   99,   99,   99,   99,   99,
-       99,   99,   99,   99,   99,   99,   99,  103,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
-      117,  117,  117,  117,  117,  117,  117,  117,  117,  117,
-      117,  117,  117,  117,  117,  117,  117,  117,  117,  117,
-      117,  117,  117,  117,  117,  117,  117,  117,  117,  117,
- 
-      117,  117,  117,  117,  117,  117,  117,  117,  117,  117,
-      117,  117,  117,  121,  121,  121,  121,  121,  121,  121,
-      121,  121,  121,  121,  121,  121,  121,  121,  121,  121,
-      121,  121,  121,  121,  121,  121,  121,  121,  121,  121,
-      121,  121,  121,  121,  121,  121,  121,  121,  121,  121,
-      121,  121,  121,  121,  121,  121,  124,  124,  124,  124,
-      124,  124,  124,  124,  124,  124,  124,  124,  124,  124,
-      124,  124,  124,  124,  124,  124,  124,  124,  124,  124,
-      124,  124,  124,  124,  124,  124,  124,  124,  124,  124,
-      124,  124,  124,  124,  124,  124,  124,  124,  124,  127,
- 
-      127,  127,  127,  127,  127,  127,  127,  127,  127,  127,
-      127,  127,  127,  127,  127,  127,  127,  127,  127,  127,
-      127,  127,  127,  127,  127,  127,  127,  127,  127,  127,
-      127,  127,  127,  127,  127,  127,  127,  127,  127,  127,
-      127,  127,  138,  138,  138,  138,  138,  138,  138,  138,
-      138,  138,  138,  138,  138,  138,  138,  138,  138,  138,
-      138,  138,  138,  138,  138,  138,  138,  138,  138,  138,
-      138,  138,  138,  138,  138,  138,  138,  138,  138,  138,
-      138,  138,  138,  138,  138,  143,  143,  143,  143,  143,
-      143,  143,  143,  143,  143,  143,  143,  143,  143,  143,
- 
-      143,  143,  143,  143,  143,  143,  143,  143,  143,  143,
-      143,  143,  143,  143,  143,  143,  143,  143,  143,  143,
-      143,  143,  143,  143,  143,  143,  143,  143,  148,  148,
-      148,  148,  148,  148,  148,  148,  148,  148,  148,  148,
-      148,  148,  148,  148,  148,  148,  148,  148,  148,  148,
-      148,  148,  148,  148,  148,  148,  148,  148,  148,  148,
-      148,  148,  148,  148,  148,  148,  148,  148,  148,  148,
-      148,  156,  217,  212,  206,  156,  204,  203,  199,  198,
-      156,  156,  156,  156,  156,  156,  156,  156,  156,  156,
-      156,  156,  156,  156,  156,  156,  156,  197,  194,  191,
- 
-      179,  176,  156,  160,  160,  160,  160,  160,  160,  160,
-      160,  160,  160,  160,  160,  160,  160,  160,  160,  160,
-      160,  160,  160,  160,  160,  160,  160,  160,  160,  160,
-      160,  160,  160,  160,  160,  160,  160,  160,  160,  160,
-      160,  160,  160,  171,  160,  160,  169,  159,  155,  340,
-      169,  118,  118,   89,   89,  169,  169,  169,  169,  169,
-      169,  169,  169,  169,  169,  169,  169,  169,  169,  169,
-      169,  169,   80,   74,   74,   72,   72,  169,  170,  170,
-      170,  170,  170,  170,  170,  170,  170,  170,  170,  170,
-      170,  170,  170,  170,  170,  170,  170,  170,  170,  170,
- 
-      170,  170,  170,  170,  170,  170,  170,  170,  170,  170,
-      170,  170,  170,  170,  170,  170,  170,  170,  170,  170,
-      170,  178,  178,  178,  340,  178,  178,  178,  178,  178,
-      178,  178,  178,  178,  178,  178,  178,  178,  178,  178,
-      178,  178,  178,  178,  178,  178,  178,  178,  178,  178,
-      178,  178,  178,  178,  178,  178,  178,  178,  178,  340,
-      178,  178,  178,  178,  183,  183,  183,  340,  183,  183,
-      183,  183,  183,  183,  183,  183,  183,  183,  183,  183,
-      183,  183,  183,  183,  183,  183,  183,  183,  183,  183,
-      183,  183,  183,  183,  183,  183,  183,  183,  183,  183,
- 
-      183,  183,  183,  183,  183,  183,  183,  190,  190,  190,
-      190,  190,  190,  190,  190,  190,  190,  190,  190,  190,
-      190,  190,  190,  190,  190,  190,  190,  190,  190,  190,
-      190,  190,  190,  190,  190,  190,  190,  190,  190,  190,
-      190,  190,  190,  190,  190,  190,  190,  190,  190,  190,
-      192,  340,  340,  340,  340,  192,  192,  192,  192,  192,
-      192,  192,  192,  192,  192,  192,  192,  192,  192,  192,
-      192,  192,  192,  192,  192,  192,  192,  192,  192,  192,
-      192,  192,  192,  192,  192,  192,  192,  192,  192,  192,
-      192,  192,  192,  193,  193,  193,  193,  193,  193,  193,
- 
-      193,  193,  193,  193,  193,  193,  193,  193,  193,  193,
-      193,  193,  193,  193,  193,  193,  193,  193,  193,  193,
-      193,  193,  193,  193,  193,  193,  193,  193,  193,  193,
-      193,  193,  193,  193,  193,  193,  195,  195,  195,  340,
-      195,  195,  195,  195,  195,  195,  195,  195,  195,  195,
-      195,  340,  195,  195,  195,  195,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  195,  195,  195,  195,  195,  195,  196,
-      340,  340,  340,  196,  340,  340,  340,  340,  196,  196,
-      196,  196,  196,  196,  196,  196,  196,  196,  196,  196,
- 
-      196,  196,  196,  196,  196,  340,  340,  340,  340,  340,
-      196,  200,  200,  200,  340,  200,  200,  200,  200,  200,
-      200,  200,  200,  200,  200,  200,  200,  200,  200,  200,
-      200,  200,  200,  200,  200,  200,  200,  200,  200,  200,
-      200,  200,  200,  200,  200,  200,  200,  200,  200,  200,
-      200,  200,  200,  200,  202,  340,  340,  340,  202,  340,
-      340,  340,  340,  202,  202,  202,  202,  202,  202,  202,
-      202,  202,  202,  202,  202,  202,  202,  202,  202,  202,
-      340,  340,  340,  340,  340,  202,  205,  205,  205,  340,
-      205,  205,  205,  205,  205,  205,  205,  205,  205,  205,
- 
-      205,  205,  205,  205,  205,  205,  205,  205,  205,  205,
-      205,  205,  205,  205,  205,  205,  205,  205,  205,  205,
-      205,  205,  205,  205,  205,  205,  205,  205,  205,  207,
-      207,  207,  340,  207,  207,  207,  207,  207,  207,  207,
-      207,  207,  207,  207,  207,  207,  207,  207,  207,  207,
-      207,  207,  207,  207,  207,  207,  207,  207,  207,  207,
-      207,  207,  207,  207,  207,  207,  207,  207,  207,  207,
-      207,  207,  210,  210,  210,  340,  210,  210,  210,  210,
-      210,  210,  210,  210,  210,  210,  210,  210,  210,  210,
-      210,  210,  210,  210,  210,  210,  210,  210,  210,  210,
- 
-      210,  210,  210,  210,  210,  210,  210,  210,  210,  210,
-      340,  210,  210,  210,  210,  211,  211,  211,  340,  211,
-      211,  211,  211,  211,  211,  211,  211,  340,  211,  211,
-      340,  211,  211,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  211,  211,  340,  340,  211,  211,  213,  340,
-      340,  340,  213,  340,  340,  340,  340,  213,  213,  213,
-      213,  213,  213,  213,  213,  213,  213,  213,  213,  213,
-      213,  213,  213,  213,  340,  340,  340,  340,  340,  213,
-      214,  214,  214,  340,  214,  214,  214,  214,  214,  214,
- 
-      214,  214,  214,  214,  214,  214,  214,  214,  214,  214,
-      214,  214,  214,  214,  214,  214,  214,  214,  214,  214,
-      214,  214,  214,  214,  214,  214,  214,  214,  214,  214,
-      214,  214,  214,  219,  219,  219,  219,  219,  219,  219,
-      219,  219,  219,  219,  219,  219,  219,  219,  219,  219,
-      219,  219,  219,  219,  219,  219,  219,  219,  219,  219,
-      219,  219,  219,  219,  219,  219,  219,  219,  219,  219,
-      219,  219,  219,  219,  219,  219,  221,  221,  221,  340,
-      221,  221,  221,  221,  221,  340,  221,  221,  221,  221,
-      221,  221,  221,  221,  221,  221,  221,  221,  221,  221,
- 
-      221,  221,  221,  221,  221,  221,  221,  221,  221,  221,
-      221,  221,  221,  221,  221,  221,  221,  221,  221,  223,
-      223,  223,  340,  223,  223,  223,  223,  223,  340,  223,
-      223,  223,  223,  223,  223,  223,  223,  223,  223,  223,
-      223,  223,  223,  223,  223,  223,  223,  223,  223,  223,
-      223,  223,  223,  223,  223,  223,  223,  223,  223,  223,
-      223,  223,  225,  225,  225,  340,  225,  225,  225,  225,
-      225,  225,  225,  225,  225,  225,  225,  225,  225,  225,
-      225,  340,  225,  225,  225,  225,  225,  225,  225,  225,
-      225,  225,  225,  225,  225,  225,  225,  225,  225,  225,
- 
-      225,  225,  225,  340,  225,  226,  226,  226,  340,  226,
-      226,  226,  226,  226,  226,  226,  226,  226,  226,  226,
-      226,  226,  226,  226,  226,  226,  226,  226,  226,  226,
-      226,  226,  226,  226,  226,  226,  226,  226,  226,  226,
-      226,  226,  226,  226,  226,  226,  226,  226,  227,  227,
-      227,  340,  227,  227,  227,  227,  227,  227,  227,  227,
-      227,  227,  227,  340,  227,  227,  227,  227,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  227,  227,  227,  227,  227,
-      227,  231,  340,  340,  340,  231,  340,  340,  340,  340,
- 
-      231,  231,  231,  231,  231,  231,  231,  231,  231,  231,
-      231,  231,  231,  231,  231,  231,  231,  340,  340,  340,
-      340,  340,  231,  234,  340,  340,  340,  340,  234,  234,
-      234,  234,  234,  234,  234,  234,  234,  234,  234,  234,
-      234,  234,  234,  234,  234,  234,  234,  234,  234,  234,
-      234,  234,  234,  234,  234,  234,  234,  234,  234,  234,
-      234,  234,  234,  234,  234,  234,  240,  240,  240,  340,
-      240,  240,  240,  240,  240,  240,  240,  240,  240,  240,
-      240,  240,  240,  240,  240,  240,  240,  240,  240,  240,
-      240,  240,  240,  240,  240,  240,  240,  240,  240,  240,
- 
-      240,  240,  240,  240,  240,  240,  240,  240,  240,  248,
-      248,  248,  340,  248,  248,  248,  248,  248,  248,  248,
-      248,  248,  248,  248,  248,  248,  248,  248,  248,  248,
-      248,  248,  248,  248,  248,  248,  248,  248,  248,  248,
-      248,  248,  248,  248,  248,  248,  248,  248,  248,  248,
-      248,  248,  252,  340,  340,  340,  340,  252,  252,  252,
-      252,  252,  252,  252,  252,  252,  252,  252,  252,  252,
-      252,  252,  252,  252,  256,  340,  340,  340,  340,  256,
-      256,  256,  256,  256,  256,  256,  256,  256,  256,  256,
-      256,  256,  256,  256,  256,  256,  257,  257,  257,  257,
- 
-      257,  257,  257,  257,  257,  257,  257,  257,  257,  257,
-      257,  257,  257,  257,  257,  257,  257,  257,  257,  257,
-      257,  257,  257,  257,  257,  257,  257,  257,  257,  257,
-      257,  257,  257,  257,  257,  257,  257,  257,  257,  259,
-      259,  259,  259,  259,  259,  259,  259,  259,  259,  259,
-      259,  259,  259,  259,  259,  259,  259,  259,  259,  259,
-      259,  259,  259,  259,  259,  259,  259,  259,  259,  259,
-      259,  259,  259,  259,  259,  259,  259,  259,  259,  259,
-      259,  259,  266,  266,  266,  340,  266,  266,  266,  266,
-      266,  266,  266,  266,  266,  266,  266,  266,  266,  266,
- 
-      266,  266,  266,  266,  266,  266,  266,  266,  266,  266,
-      266,  266,  266,  266,  266,  266,  266,  266,  266,  266,
-      266,  266,  340,  266,  266,  269,  269,  269,  269,  269,
-      269,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  269,  271,  271,
-      271,  340,  271,  271,  271,  271,  271,  271,  271,  271,
-      271,  271,  271,  271,  271,  271,  271,  271,  271,  271,
-      271,  271,  271,  271,  271,  271,  271,  271,  271,  271,
-      271,  271,  271,  271,  271,  271,  271,  271,  271,  271,
-      271,  277,  277,  277,  277,  277,  277,  340,  340,  340,
- 
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  277,  281,  281,  281,  281,  281,  281,
-      281,  281,  281,  281,  281,  281,  281,  281,  281,  281,
-      281,  281,  281,  281,  281,  281,  281,  281,  281,  281,
-      281,  281,  281,  281,  281,  281,  281,  281,  281,  281,
-      281,  281,  281,  281,  281,  281,  281,  291,  291,  291,
-      291,  291,  291,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  291,
-      293,  293,  293,  293,  293,  293,  293,  293,  293,  293,
-      293,  293,  293,  293,  293,  293,  293,  293,  293,  293,
- 
-      293,  293,  293,  293,  293,  293,  293,  293,  293,  293,
-      293,  293,  293,  293,  293,  293,  293,  293,  293,  293,
-      293,  293,  293,  295,  340,  340,  340,  295,  340,  340,
-      340,  340,  295,  295,  295,  295,  295,  295,  295,  295,
-      295,  295,  295,  295,  295,  295,  295,  295,  295,  340,
-      340,  340,  340,  340,  295,  300,  340,  340,  340,  300,
-      340,  340,  340,  340,  300,  300,  300,  300,  300,  300,
-      300,  300,  300,  300,  300,  300,  300,  300,  300,  300,
-      300,  340,  340,  340,  340,  340,  300,  304,  304,  304,
-      304,  304,  304,  340,  340,  340,  340,  340,  340,  340,
- 
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  304,
-      276,  276,  276,  276,  276,  276,  276,  276,  276,  276,
-      276,  276,  276,  276,  276,  276,  276,  276,  276,  276,
-      276,  276,  276,  276,  276,  276,  276,  276,  276,  276,
-      276,  276,  276,  276,  276,  276,  276,  276,  276,  276,
-      276,  276,  276,  307,  307,  307,  307,  307,  307,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  307,  284,  284,  284,  340,
-      284,  284,  284,  284,  284,  284,  284,  284,  284,  284,
-      284,  284,  284,  284,  284,  284,  284,  284,  284,  284,
- 
-      284,  284,  284,  284,  284,  284,  284,  284,  284,  284,
-      284,  284,  284,  284,  284,  284,  284,  284,  284,  314,
-      314,  314,  314,  314,  314,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  314,   45,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340
-    } ;
- 
-static const short int yy_chk[3287] =
-    {   0,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    2,    2,    2,    2,    2,    2,    2,
-        2,    2,    2,    2,    2,    2,    2,    2,    2,    2,
-        2,    2,    2,    2,    2,    2,    2,    2,    2,    2,
-        2,    2,    2,    2,    2,    2,    2,    2,    2,    2,
-        2,    2,    2,    2,    2,    2,    3,    3,    3,    3,
-        3,    3,    3,    3,    3,   70,   66,    3,   11,   11,
- 
-       11,   11,   17,   66,    3,   12,   12,   12,   12,   18,
-       29,   98,   17,  166,   30,   23,  166,   24,   98,   18,
-       70,   19,    3,   23,    3,   24,    3,    4,    4,    4,
-        4,    4,    4,    4,    4,    4,    4,   19,    4,   17,
-        4,   17,  329,   31,  328,    4,   18,   29,   18,   31,
-       23,   30,   24,   23,   32,   24,   33,  327,   34,   19,
-       32,  326,   33,    4,   34,    4,  325,    4,    9,    9,
-        9,    9,    9,    9,    9,    9,    9,    9,    9,    9,
-        9,    9,    9,    9,    9,    9,    9,    9,    9,    9,
-        9,    9,    9,    9,    9,    9,    9,    9,    9,    9,
- 
-        9,    9,    9,    9,    9,    9,    9,    9,    9,    9,
-        9,   13,   13,   13,   13,   13,   13,   13,   13,   13,
-       13,   13,   13,   13,   13,   13,   13,   13,   13,   13,
-       13,   13,   13,   13,   13,   13,   13,   13,   13,   13,
-       13,   13,   13,   13,   13,   13,   13,   13,   13,   13,
-       13,   13,   13,   13,   20,   21,   35,   22,   47,   47,
-       47,   47,   21,   21,   22,   22,   51,   51,   51,   51,
-       20,  324,   35,   58,   58,   58,   58,  102,   62,   58,
-       62,   62,   82,   82,  102,   82,   58,  139,  139,  323,
-      139,  322,   20,   21,   35,   22,   25,   25,   25,   25,
- 
-       25,   25,   25,   25,   25,   25,   25,   25,   25,   25,
-       25,   25,   25,   25,   25,   25,   25,   25,   25,   25,
-       25,   25,   25,   25,   25,   25,   25,   25,   25,   25,
-       25,   25,   25,   25,   25,   25,   25,   25,   25,   36,
-       39,   39,   39,   39,   67,   67,   67,   67,  111,  106,
-       67,  132,  132,  147,  132,   36,  106,   67,  144,  144,
-      147,  144,  151,  321,  132,  153,  153,  153,  153,  151,
-       39,  111,  320,  160,  160,   39,  160,   36,   37,   37,
-       37,   37,   37,   37,   37,   37,   37,   37,   37,   37,
-       37,   37,   37,   37,   37,   37,   37,   37,   37,   37,
- 
-       37,   37,   37,   37,   37,   37,   37,   37,   37,   37,
-       37,   37,   37,   37,   37,   37,   37,   37,   37,   37,
-       37,   40,   40,   40,   40,   43,   43,   43,   43,  149,
-      149,  317,  149,  155,  155,  155,  155,  315,   43,  157,
-      157,  157,  157,  161,  161,  313,  161,  163,  163,  312,
-      163,   40,  165,  165,  165,  165,   40,  311,  172,  172,
-      172,  172,  310,  309,  172,   43,   44,   44,   44,   44,
-      149,  172,  178,  179,  214,  178,  179,  308,  306,   44,
-      179,  186,  186,  186,  186,  201,  201,  186,  201,  228,
-      228,  305,  228,  301,  186,  235,  235,  214,  235,  299,
- 
-      238,  238,  228,  238,  298,  293,   44,   44,   54,  239,
-      239,  239,  239,  292,   54,  288,   54,  287,   54,  247,
-      247,   54,  247,   54,   54,   54,   54,   54,   54,   54,
-      286,  285,  281,   54,   65,   65,   65,  280,   65,   65,
-       65,   65,   65,   65,   65,   65,   65,   65,   65,   65,
-       65,   65,   65,   65,   65,   65,   65,   65,   65,   65,
-       65,   65,   65,   65,   65,   65,   65,   65,   65,   65,
-       65,   65,   65,   65,   65,   65,   65,  181,  279,  278,
-      276,  181,  245,  245,  245,  245,  181,  181,  181,  181,
-      181,  181,  181,  181,  181,  181,  181,  181,  181,  181,
- 
-      181,  181,  181,  273,  249,  249,  181,  249,  181,  199,
-      199,  199,  199,  199,  199,  199,  199,  199,  199,  199,
-      199,  199,  199,  199,  199,  199,  199,  199,  199,  199,
-      199,  199,  199,  199,  199,  199,  199,  199,  199,  199,
-      199,  199,  199,  199,  199,  199,  199,  199,  199,  199,
-      199,  199,  230,  230,  230,  272,  230,  230,  230,  230,
-      230,  230,  230,  230,  230,  230,  230,  230,  230,  230,
-      230,  230,  230,  230,  230,  230,  230,  230,  230,  230,
-      230,  230,  230,  230,  230,  230,  230,  230,  230,  230,
-      230,  230,  230,  230,  230,  243,  243,  270,  243,  251,
- 
-      251,  262,  251,  253,  253,  253,  253,  265,  259,  257,
-      265,  265,  289,  289,  289,  289,  296,  296,  296,  296,
-      303,  255,  318,  303,  303,  318,  319,  254,  250,  319,
-      244,  242,  237,  236,  233,  232,  243,  264,  264,  264,
-      264,  264,  264,  229,  222,  219,  218,  217,  209,  204,
-      198,  197,  193,  190,  185,  264,  176,  175,  264,  264,
-      302,  302,  302,  302,  302,  302,  174,  170,  168,  162,
-      152,  150,  146,  142,  141,  137,  136,  134,  126,  123,
-      117,  114,  302,  341,  341,  341,  341,  341,  341,  341,
-      341,  341,  341,  341,  341,  341,  341,  341,  341,  341,
- 
-      341,  341,  341,  341,  341,  341,  341,  341,  341,  341,
-      341,  341,  341,  341,  341,  341,  341,  341,  341,  341,
-      341,  341,  341,  341,  341,  341,  342,  342,  342,  342,
-      342,  342,  342,  342,  342,  342,  342,  342,  342,  342,
-      342,  342,  342,  342,  342,  342,  342,  342,  342,  342,
-      342,  342,  342,  342,  342,  342,  342,  342,  342,  342,
-      342,  342,  342,  342,  342,  342,  342,  342,  342,  343,
-      343,  343,  343,  343,  343,  343,  343,  343,  343,  343,
-      343,  343,  343,  343,  343,  343,  343,  343,  343,  343,
-      343,  343,  343,  343,  343,  343,  343,  343,  343,  343,
- 
-      343,  343,  343,  343,  343,  343,  343,  343,  343,  343,
-      343,  343,  344,  344,  344,  344,  344,  344,  344,  344,
-      344,  344,  344,  344,  344,  344,  344,  344,  344,  344,
-      344,  344,  344,  344,  344,  344,  344,  344,  344,  344,
-      344,  344,  344,  344,  344,  344,  344,  344,  344,  344,
-      344,  344,  344,  344,  344,  345,  345,  345,  345,  345,
-      345,  345,  345,  345,  345,  345,  345,  345,  345,  345,
-      345,  345,  345,  345,  345,  345,  345,  345,  345,  345,
-      345,  345,  345,  345,  345,  345,  345,  345,  345,  345,
-      345,  345,  345,  345,  345,  345,  345,  345,  346,  346,
- 
-      346,  346,  346,  346,  346,  346,  346,  346,  346,  346,
-      346,  346,  346,  346,  346,  346,  346,  346,  346,  346,
-      346,  346,  346,  346,  346,  346,  346,  346,  346,  346,
-      346,  346,  346,  346,  346,  346,  346,  346,  346,  346,
-      346,  347,  347,  347,  347,  347,  347,  347,  347,  347,
-      347,  347,  347,  347,  347,  347,  347,  347,  347,  347,
-      347,  347,  347,  347,  347,  347,  347,  347,  347,  347,
-      347,  347,  347,  347,  347,  347,  347,  347,  347,  347,
-      347,  347,  347,  347,  348,  348,  348,  348,  348,  348,
-      348,  348,  348,  348,  348,  348,  348,  348,  348,  348,
- 
-      348,  348,  348,  348,  348,  348,  348,  348,  348,  348,
-      348,  348,  348,  348,  348,  348,  348,  348,  348,  348,
-      348,  348,  348,  348,  348,  348,  348,  349,  349,  349,
-      349,  349,  349,  349,  349,  349,  349,  349,  349,  349,
-      349,  349,  349,  349,  349,  349,  349,  349,  349,  349,
-      349,  349,  349,  349,  349,  349,  349,  349,  349,  349,
-      349,  349,  349,  349,  349,  349,  349,  349,  349,  349,
-      350,  350,  350,  350,  350,  350,  350,  350,  350,  350,
-      350,  350,  350,  350,  350,  350,  350,  350,  350,  350,
-      350,  350,  350,  350,  350,  350,  350,  350,  350,  350,
- 
-      350,  350,  350,  350,  350,  350,  350,  350,  350,  350,
-      350,  350,  350,  351,  351,  351,  351,  351,  351,  351,
-      351,  351,  351,  351,  351,  351,  351,  351,  351,  351,
-      351,  351,  351,  351,  351,  351,  351,  351,  351,  351,
-      351,  351,  351,  351,  351,  351,  351,  351,  351,  351,
-      351,  351,  351,  351,  351,  351,  352,  352,  352,  352,
-      352,  352,  352,  352,  352,  352,  352,  352,  352,  352,
-      352,  352,  352,  352,  352,  352,  352,  352,  352,  352,
-      352,  352,  352,  352,  352,  352,  352,  352,  352,  352,
-      352,  352,  352,  352,  352,  352,  352,  352,  352,  353,
- 
-      353,  353,  353,  353,  353,  353,  353,  353,  353,  353,
-      353,  353,  353,  353,  353,  353,  353,  353,  353,  353,
-      353,  353,  353,  353,  353,  353,  353,  353,  353,  353,
-      353,  353,  353,  353,  353,  353,  353,  353,  353,  353,
-      353,  353,  354,  354,  354,  354,  354,  354,  354,  354,
-      354,  354,  354,  354,  354,  354,  354,  354,  354,  354,
-      354,  354,  354,  354,  354,  354,  354,  354,  354,  354,
-      354,  354,  354,  354,  354,  354,  354,  354,  354,  354,
-      354,  354,  354,  354,  354,  355,  355,  355,  355,  355,
-      355,  355,  355,  355,  355,  355,  355,  355,  355,  355,
- 
-      355,  355,  355,  355,  355,  355,  355,  355,  355,  355,
-      355,  355,  355,  355,  355,  355,  355,  355,  355,  355,
-      355,  355,  355,  355,  355,  355,  355,  355,  356,  356,
-      356,  356,  356,  356,  356,  356,  356,  356,  356,  356,
-      356,  356,  356,  356,  356,  356,  356,  356,  356,  356,
-      356,  356,  356,  356,  356,  356,  356,  356,  356,  356,
-      356,  356,  356,  356,  356,  356,  356,  356,  356,  356,
-      356,  357,  113,  109,  100,  357,   94,   88,   80,   79,
-      357,  357,  357,  357,  357,  357,  357,  357,  357,  357,
-      357,  357,  357,  357,  357,  357,  357,   78,   73,   71,
- 
-       64,   61,  357,  358,  358,  358,  358,  358,  358,  358,
-      358,  358,  358,  358,  358,  358,  358,  358,  358,  358,
-      358,  358,  358,  358,  358,  358,  358,  358,  358,  358,
-      358,  358,  358,  358,  358,  358,  358,  358,  358,  358,
-      358,  358,  358,   56,  358,  358,  359,   53,   49,   45,
-      359,   28,   27,   16,   15,  359,  359,  359,  359,  359,
-      359,  359,  359,  359,  359,  359,  359,  359,  359,  359,
-      359,  359,   10,    8,    7,    6,    5,  359,  360,  360,
-      360,  360,  360,  360,  360,  360,  360,  360,  360,  360,
-      360,  360,  360,  360,  360,  360,  360,  360,  360,  360,
- 
-      360,  360,  360,  360,  360,  360,  360,  360,  360,  360,
-      360,  360,  360,  360,  360,  360,  360,  360,  360,  360,
-      360,  361,  361,  361,    0,  361,  361,  361,  361,  361,
-      361,  361,  361,  361,  361,  361,  361,  361,  361,  361,
-      361,  361,  361,  361,  361,  361,  361,  361,  361,  361,
-      361,  361,  361,  361,  361,  361,  361,  361,  361,    0,
-      361,  361,  361,  361,  362,  362,  362,    0,  362,  362,
-      362,  362,  362,  362,  362,  362,  362,  362,  362,  362,
-      362,  362,  362,  362,  362,  362,  362,  362,  362,  362,
-      362,  362,  362,  362,  362,  362,  362,  362,  362,  362,
- 
-      362,  362,  362,  362,  362,  362,  362,  363,  363,  363,
-      363,  363,  363,  363,  363,  363,  363,  363,  363,  363,
-      363,  363,  363,  363,  363,  363,  363,  363,  363,  363,
-      363,  363,  363,  363,  363,  363,  363,  363,  363,  363,
-      363,  363,  363,  363,  363,  363,  363,  363,  363,  363,
-      364,    0,    0,    0,    0,  364,  364,  364,  364,  364,
-      364,  364,  364,  364,  364,  364,  364,  364,  364,  364,
-      364,  364,  364,  364,  364,  364,  364,  364,  364,  364,
-      364,  364,  364,  364,  364,  364,  364,  364,  364,  364,
-      364,  364,  364,  365,  365,  365,  365,  365,  365,  365,
- 
-      365,  365,  365,  365,  365,  365,  365,  365,  365,  365,
-      365,  365,  365,  365,  365,  365,  365,  365,  365,  365,
-      365,  365,  365,  365,  365,  365,  365,  365,  365,  365,
-      365,  365,  365,  365,  365,  365,  366,  366,  366,    0,
-      366,  366,  366,  366,  366,  366,  366,  366,  366,  366,
-      366,    0,  366,  366,  366,  366,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,  366,  366,  366,  366,  366,  366,  367,
-        0,    0,    0,  367,    0,    0,    0,    0,  367,  367,
-      367,  367,  367,  367,  367,  367,  367,  367,  367,  367,
- 
-      367,  367,  367,  367,  367,    0,    0,    0,    0,    0,
-      367,  368,  368,  368,    0,  368,  368,  368,  368,  368,
-      368,  368,  368,  368,  368,  368,  368,  368,  368,  368,
-      368,  368,  368,  368,  368,  368,  368,  368,  368,  368,
-      368,  368,  368,  368,  368,  368,  368,  368,  368,  368,
-      368,  368,  368,  368,  369,    0,    0,    0,  369,    0,
-        0,    0,    0,  369,  369,  369,  369,  369,  369,  369,
-      369,  369,  369,  369,  369,  369,  369,  369,  369,  369,
-        0,    0,    0,    0,    0,  369,  370,  370,  370,    0,
-      370,  370,  370,  370,  370,  370,  370,  370,  370,  370,
- 
-      370,  370,  370,  370,  370,  370,  370,  370,  370,  370,
-      370,  370,  370,  370,  370,  370,  370,  370,  370,  370,
-      370,  370,  370,  370,  370,  370,  370,  370,  370,  371,
-      371,  371,    0,  371,  371,  371,  371,  371,  371,  371,
-      371,  371,  371,  371,  371,  371,  371,  371,  371,  371,
-      371,  371,  371,  371,  371,  371,  371,  371,  371,  371,
-      371,  371,  371,  371,  371,  371,  371,  371,  371,  371,
-      371,  371,  372,  372,  372,    0,  372,  372,  372,  372,
-      372,  372,  372,  372,  372,  372,  372,  372,  372,  372,
-      372,  372,  372,  372,  372,  372,  372,  372,  372,  372,
- 
-      372,  372,  372,  372,  372,  372,  372,  372,  372,  372,
-        0,  372,  372,  372,  372,  373,  373,  373,    0,  373,
-      373,  373,  373,  373,  373,  373,  373,    0,  373,  373,
-        0,  373,  373,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,  373,  373,    0,    0,  373,  373,  374,    0,
-        0,    0,  374,    0,    0,    0,    0,  374,  374,  374,
-      374,  374,  374,  374,  374,  374,  374,  374,  374,  374,
-      374,  374,  374,  374,    0,    0,    0,    0,    0,  374,
-      375,  375,  375,    0,  375,  375,  375,  375,  375,  375,
- 
-      375,  375,  375,  375,  375,  375,  375,  375,  375,  375,
-      375,  375,  375,  375,  375,  375,  375,  375,  375,  375,
-      375,  375,  375,  375,  375,  375,  375,  375,  375,  375,
-      375,  375,  375,  376,  376,  376,  376,  376,  376,  376,
-      376,  376,  376,  376,  376,  376,  376,  376,  376,  376,
-      376,  376,  376,  376,  376,  376,  376,  376,  376,  376,
-      376,  376,  376,  376,  376,  376,  376,  376,  376,  376,
-      376,  376,  376,  376,  376,  376,  377,  377,  377,    0,
-      377,  377,  377,  377,  377,    0,  377,  377,  377,  377,
-      377,  377,  377,  377,  377,  377,  377,  377,  377,  377,
- 
-      377,  377,  377,  377,  377,  377,  377,  377,  377,  377,
-      377,  377,  377,  377,  377,  377,  377,  377,  377,  378,
-      378,  378,    0,  378,  378,  378,  378,  378,    0,  378,
-      378,  378,  378,  378,  378,  378,  378,  378,  378,  378,
-      378,  378,  378,  378,  378,  378,  378,  378,  378,  378,
-      378,  378,  378,  378,  378,  378,  378,  378,  378,  378,
-      378,  378,  379,  379,  379,    0,  379,  379,  379,  379,
-      379,  379,  379,  379,  379,  379,  379,  379,  379,  379,
-      379,    0,  379,  379,  379,  379,  379,  379,  379,  379,
-      379,  379,  379,  379,  379,  379,  379,  379,  379,  379,
- 
-      379,  379,  379,    0,  379,  380,  380,  380,    0,  380,
-      380,  380,  380,  380,  380,  380,  380,  380,  380,  380,
-      380,  380,  380,  380,  380,  380,  380,  380,  380,  380,
-      380,  380,  380,  380,  380,  380,  380,  380,  380,  380,
-      380,  380,  380,  380,  380,  380,  380,  380,  381,  381,
-      381,    0,  381,  381,  381,  381,  381,  381,  381,  381,
-      381,  381,  381,    0,  381,  381,  381,  381,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,  381,  381,  381,  381,  381,
-      381,  382,    0,    0,    0,  382,    0,    0,    0,    0,
- 
-      382,  382,  382,  382,  382,  382,  382,  382,  382,  382,
-      382,  382,  382,  382,  382,  382,  382,    0,    0,    0,
-        0,    0,  382,  383,    0,    0,    0,    0,  383,  383,
-      383,  383,  383,  383,  383,  383,  383,  383,  383,  383,
-      383,  383,  383,  383,  383,  383,  383,  383,  383,  383,
-      383,  383,  383,  383,  383,  383,  383,  383,  383,  383,
-      383,  383,  383,  383,  383,  383,  384,  384,  384,    0,
-      384,  384,  384,  384,  384,  384,  384,  384,  384,  384,
-      384,  384,  384,  384,  384,  384,  384,  384,  384,  384,
-      384,  384,  384,  384,  384,  384,  384,  384,  384,  384,
- 
-      384,  384,  384,  384,  384,  384,  384,  384,  384,  385,
-      385,  385,    0,  385,  385,  385,  385,  385,  385,  385,
-      385,  385,  385,  385,  385,  385,  385,  385,  385,  385,
-      385,  385,  385,  385,  385,  385,  385,  385,  385,  385,
-      385,  385,  385,  385,  385,  385,  385,  385,  385,  385,
-      385,  385,  386,    0,    0,    0,    0,  386,  386,  386,
-      386,  386,  386,  386,  386,  386,  386,  386,  386,  386,
-      386,  386,  386,  386,  387,    0,    0,    0,    0,  387,
-      387,  387,  387,  387,  387,  387,  387,  387,  387,  387,
-      387,  387,  387,  387,  387,  387,  388,  388,  388,  388,
- 
-      388,  388,  388,  388,  388,  388,  388,  388,  388,  388,
-      388,  388,  388,  388,  388,  388,  388,  388,  388,  388,
-      388,  388,  388,  388,  388,  388,  388,  388,  388,  388,
-      388,  388,  388,  388,  388,  388,  388,  388,  388,  389,
-      389,  389,  389,  389,  389,  389,  389,  389,  389,  389,
-      389,  389,  389,  389,  389,  389,  389,  389,  389,  389,
-      389,  389,  389,  389,  389,  389,  389,  389,  389,  389,
-      389,  389,  389,  389,  389,  389,  389,  389,  389,  389,
-      389,  389,  390,  390,  390,    0,  390,  390,  390,  390,
-      390,  390,  390,  390,  390,  390,  390,  390,  390,  390,
- 
-      390,  390,  390,  390,  390,  390,  390,  390,  390,  390,
-      390,  390,  390,  390,  390,  390,  390,  390,  390,  390,
-      390,  390,    0,  390,  390,  391,  391,  391,  391,  391,
-      391,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,  391,  392,  392,
-      392,    0,  392,  392,  392,  392,  392,  392,  392,  392,
-      392,  392,  392,  392,  392,  392,  392,  392,  392,  392,
-      392,  392,  392,  392,  392,  392,  392,  392,  392,  392,
-      392,  392,  392,  392,  392,  392,  392,  392,  392,  392,
-      392,  393,  393,  393,  393,  393,  393,    0,    0,    0,
- 
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,  393,  394,  394,  394,  394,  394,  394,
-      394,  394,  394,  394,  394,  394,  394,  394,  394,  394,
-      394,  394,  394,  394,  394,  394,  394,  394,  394,  394,
-      394,  394,  394,  394,  394,  394,  394,  394,  394,  394,
-      394,  394,  394,  394,  394,  394,  394,  395,  395,  395,
-      395,  395,  395,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,  395,
-      396,  396,  396,  396,  396,  396,  396,  396,  396,  396,
-      396,  396,  396,  396,  396,  396,  396,  396,  396,  396,
- 
-      396,  396,  396,  396,  396,  396,  396,  396,  396,  396,
-      396,  396,  396,  396,  396,  396,  396,  396,  396,  396,
-      396,  396,  396,  397,    0,    0,    0,  397,    0,    0,
-        0,    0,  397,  397,  397,  397,  397,  397,  397,  397,
-      397,  397,  397,  397,  397,  397,  397,  397,  397,    0,
-        0,    0,    0,    0,  397,  398,    0,    0,    0,  398,
-        0,    0,    0,    0,  398,  398,  398,  398,  398,  398,
-      398,  398,  398,  398,  398,  398,  398,  398,  398,  398,
-      398,    0,    0,    0,    0,    0,  398,  399,  399,  399,
-      399,  399,  399,    0,    0,    0,    0,    0,    0,    0,
- 
-        0,    0,    0,    0,    0,    0,    0,    0,    0,  399,
-      400,  400,  400,  400,  400,  400,  400,  400,  400,  400,
-      400,  400,  400,  400,  400,  400,  400,  400,  400,  400,
-      400,  400,  400,  400,  400,  400,  400,  400,  400,  400,
-      400,  400,  400,  400,  400,  400,  400,  400,  400,  400,
-      400,  400,  400,  401,  401,  401,  401,  401,  401,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,  401,  402,  402,  402,    0,
-      402,  402,  402,  402,  402,  402,  402,  402,  402,  402,
-      402,  402,  402,  402,  402,  402,  402,  402,  402,  402,
- 
-      402,  402,  402,  402,  402,  402,  402,  402,  402,  402,
-      402,  402,  402,  402,  402,  402,  402,  402,  402,  403,
-      403,  403,  403,  403,  403,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-        0,  403,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340,  340,  340,  340,  340,
-      340,  340,  340,  340,  340,  340
-    } ;
- 
-static yy_ste_type yy_last_accepting_state;
-static YY_CHAR *yy_last_accepting_cpos;
- 
-/* the intent behind this definition is that it'll catch
- * any uses of REJECT which flex missed
- */
-#define REJECT reject_used_but_not_detected
-#define yymore() yymrused_but_not_detected
-#define YY_MORE_ADJ 0
- 
-/* these variables are all declared out here so that section 3 code can
- * manipulate them
- */
-/* points to current character in buffer */
-static YY_CHAR *yy_c_buf_p = (YY_CHAR *) 0;
-static int yy_init = 1;         /* whether we need to initialize */
-static int yy_start = 0;        /* start state number */
- 
-/* flag which is used to allow yywrap()'s to do buffer switches
- * instead of setting up a fresh yyin.  A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
- 
-static yy_ste_type yy_get_previous_state YY_PROTO(( void ));
-static yy_ste_type yy_try_NUL_trans YY_PROTO(( yy_ste_type current_state ));
-static int yy_get_next_buffer YY_PROTO(( void ));
-static void yyunput YY_PROTO(( YY_CHAR c, YY_CHAR *buf_ptr ));
-void yyrestrt YY_PROTO(( FILE *input_file ));
-void yyswtobf YY_PROTO(( YY_BUFFER_STATE new_buffer ));
-void yyldbfst YY_PROTO(( void ));
-YY_BUFFER_STATE yycrbffr YY_PROTO(( FILE *file, int size ));
-void yydlbffr YY_PROTO(( YY_BUFFER_STATE b ));
-void yyinbffr YY_PROTO(( YY_BUFFER_STATE b, FILE *file ));
- 
-#define yy_new_buffer yycrbffr
- 
-#ifdef __cplusplus
-static int yyinput YY_PROTO(( void ));
-#else
-static int input YY_PROTO(( void ));
-#endif
- 
-YY_DECL
-    {
-    register yy_ste_type yy_current_state;
-    register YY_CHAR *yy_cp, *yy_bp;
-    register int yy_act;
- 
- 
-    static int bracelevel, didadef;
-    int i, indented_code, checking_used, new_xlation;
-    int doing_codeblock = false;
-    Char nmdef[MAXLINE], myesc();
- 
- 
-    if ( yy_init )
-        {
-        YY_USER_INIT;
- 
-        if ( ! yy_start )
-            yy_start = 1;       /* first start state */
- 
-        if ( ! yyin )
-            yyin = stdin;
- 
-        if ( ! yyout )
-            yyout = stdout;
- 
-        if ( yy_current_buffer )
-            yyinbffr( yy_current_buffer, yyin );
-        else
-            yy_current_buffer = yycrbffr( yyin, YY_BUF_SIZE );
- 
-        yyldbfst();
- 
-        yy_init = 0;
-        }
- 
-    while ( 1 )         /* loops until end-of-file is reached */
-        {
-        yy_cp = yy_c_buf_p;
- 
-        /* support of yytext */
-        *yy_cp = yy_hold_char;
- 
-        /* yy_bp points to the position in yy_ch_buf of the start of the
-         * current run.
-         */
-        yy_bp = yy_cp;
- 
-	yy_current_state = yy_start;
-	if ( yy_bp[-1] == '\n' )
-	    ++yy_current_state;
-yy_match:
-	do
-	    {
-	    register YY_CHAR yy_c = yy_ec[*yy_cp];
-	    if ( yy_accept[yy_current_state] )
-		{
-		yy_last_accepting_state = yy_current_state;
-		yy_last_accepting_cpos = yy_cp;
-		}
-	    while(yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state)
-		{
-		yy_current_state = yy_def[yy_current_state];
-		}
-	    yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c];
-	    ++yy_cp;
-	    }
-	while ( yy_current_state != 340 );
-	yy_cp = yy_last_accepting_cpos;
-	yy_current_state = yy_last_accepting_state;
- 
-yy_find_action:
-	yy_act = yy_accept[yy_current_state];
- 
-        YY_DO_BEFORE_ACTION;
-        YY_USER_ACTION;
- 
-do_action:      /* this label is used only to access EOF actions */
- 
- 
-        switch ( yy_act )
-            {
-	    case 0: /* must backtrack */
-	    /* undo the effects of YY_DO_BEFORE_ACTION */
-	    *yy_cp = yy_hold_char;
-	    yy_cp = yy_last_accepting_cpos;
-	    yy_current_state = yy_last_accepting_state;
-	    goto yy_find_action;
- 
-case 1:
-# line 90 "<stdin>"
-indented_code = true; BEGIN(CODEBLOCK);
-	YY_BREAK
-case 2:
-# line 91 "<stdin>"
-++linenum; /* treat as a comment */
-	YY_BREAK
-case 3:
-# line 92 "<stdin>"
-ECHO; BEGIN(C_COMMENT);
-	YY_BREAK
-case 4:
-# line 93 "<stdin>"
-return ( SCDECL );
-	YY_BREAK
-case 5:
-# line 94 "<stdin>"
-return ( XSCDECL );
-	YY_BREAK
-case 6:
-# line 95 "<stdin>"
-{
-                        ++linenum;
-                        lndirout( stdout );
-                        indented_code = false;
-                        BEGIN(CODEBLOCK);
-                        }
-	YY_BREAK
-case 7:
-# line 102 "<stdin>"
-return ( WHITESPACE );
-	YY_BREAK
-case 8:
-# line 104 "<stdin>"
-{
-                        sectnum = 2;
-                        lndirout( stdout );
-                        BEGIN(SECT2PROLOG);
-                        return ( SECTEND );
-                        }
-	YY_BREAK
-case 9:
-# line 111 "<stdin>"
-{
-        pptmsg( "warning - %%used/%%unused have been deprecated" );
-                        checking_used = REALLY_USED; BEGIN(USED_LIST);
-                        }
-	YY_BREAK
-case 10:
-# line 115 "<stdin>"
-{
-                        checking_used = REALLY_NOT_USED; BEGIN(USED_LIST);
-        pptmsg( "warning - %%used/%%unused have been deprecated" );
-                        checking_used = REALLY_NOT_USED; BEGIN(USED_LIST);
-                        }
-	YY_BREAK
-case 11:
-# line 122 "<stdin>"
-{
-#ifdef NOTDEF
-                        fprintf( stderr,
-                             "old-style lex command at line %d ignored:\n\t%s",
-                                 linenum, yytext );
-#endif
-                        ++linenum;
-                        }
-	YY_BREAK
-case 12:
-# line 131 "<stdin>"
-/* ignore old lex directive */
-	YY_BREAK
-case 13:
-# line 133 "<stdin>"
-{
-                        ++linenum;
-                        xlation =
-                            (int *) malloc( sizeof( int ) * (unsigned) csize );
- 
-                        if ( ! xlation )
-                            flxfatal(
-                                "dynamic memory failure building %t table" );
- 
-                        for ( i = 0; i < csize; ++i )
-                            xlation[i] = 0;
- 
-                        nuxlatns = 0;
- 
-                        BEGIN(XLATION);
-                        }
-	YY_BREAK
-case 14:
-# line 150 "<stdin>"
-synerr( "unrecognized '%' directive" );
-	YY_BREAK
-case 15:
-# line 152 "<stdin>"
-{
-                        (void) strcpy( nmstr, (char *) yytext );
-                        didadef = false;
-                        BEGIN(PICKUPDEF);
-                        }
-	YY_BREAK
-case 16:
-# line 158 "<stdin>"
-RETURNNAME;
-	YY_BREAK
-case 17:
-# line 159 "<stdin>"
-++linenum; /* allows blank lines in section 1 */
-	YY_BREAK
-case 18:
-# line 160 "<stdin>"
-++linenum; return ( '\n' );
-	YY_BREAK
-case 19:
-# line 161 "<stdin>"
-synerr( "illegal character" ); BEGIN(RECOVER);
-	YY_BREAK
-case 20:
-# line 164 "<stdin>"
-ECHO; BEGIN(INITIAL);
-	YY_BREAK
-case 21:
-# line 165 "<stdin>"
-++linenum; ECHO; BEGIN(INITIAL);
-	YY_BREAK
-case 22:
-# line 166 "<stdin>"
-ECHO;
-	YY_BREAK
-case 23:
-# line 167 "<stdin>"
-ECHO;
-	YY_BREAK
-case 24:
-# line 168 "<stdin>"
-++linenum; ECHO;
-	YY_BREAK
-case 25:
-# line 171 "<stdin>"
-++linenum; BEGIN(INITIAL);
-	YY_BREAK
-case 26:
-# line 172 "<stdin>"
-ECHO; CHECK_REJECT(yytext);
-	YY_BREAK
-case 27:
-# line 173 "<stdin>"
-ECHO; CHECK_YYMORE(yytext);
-	YY_BREAK
-case 28:
-# line 174 "<stdin>"
-ECHO;
-	YY_BREAK
-case 29:
-# line 175 "<stdin>"
-{
-                        ++linenum;
-                        ECHO;
-                        if ( indented_code )
-                            BEGIN(INITIAL);
-                        }
-	YY_BREAK
-case 30:
-# line 183 "<stdin>"
-/* separates name and definition */
-	YY_BREAK
-case 31:
-# line 185 "<stdin>"
-{
-                        (void) strcpy( (char *) nmdef, (char *) yytext );
- 
-                        for ( i = strlen( (char *) nmdef ) - 1;
-                              i >= 0 &&
-                              nmdef[i] == ' ' || nmdef[i] == '\t';
-                              --i )
-                            ;
- 
-                        nmdef[i + 1] = '\0';
- 
-                        ndinstal( nmstr, nmdef );
-                        didadef = true;
-                        }
-	YY_BREAK
-case 32:
-# line 200 "<stdin>"
-{
-                        if ( ! didadef )
-                            synerr( "incomplete name definition" );
-                        BEGIN(INITIAL);
-                        ++linenum;
-                        }
-	YY_BREAK
-case 33:
-# line 207 "<stdin>"
-++linenum; BEGIN(INITIAL); RETURNNAME;
-	YY_BREAK
-case 34:
-# line 210 "<stdin>"
-++linenum; BEGIN(INITIAL);
-	YY_BREAK
-case 35:
-# line 211 "<stdin>"
- 
-	YY_BREAK
-case 36:
-# line 212 "<stdin>"
-{
-                        if ( allupper( yytext ) )
-                            rjctused = checking_used;
-                        else
-                            synerr( "unrecognized %used/%unused construct" );
-                        }
-	YY_BREAK
-case 37:
-# line 218 "<stdin>"
-{
-                        if ( alllower( yytext ) )
-                            yymrreus = checking_used;
-                        else
-                            synerr( "unrecognized %used/%unused construct" );
-                        }
-	YY_BREAK
-case 38:
-# line 224 "<stdin>"
-synerr( "unrecognized %used/%unused construct" );
-	YY_BREAK
-case 39:
-# line 227 "<stdin>"
-++linenum; BEGIN(INITIAL);
-	YY_BREAK
-case 40:
-# line 228 "<stdin>"
-++nuxlatns; new_xlation = true;
-	YY_BREAK
-case 41:
-# line 229 "<stdin>"
-synerr( "bad row in translation table" );
-	YY_BREAK
-case 42:
-# line 230 "<stdin>"
-/* ignore whitespace */
-	YY_BREAK
-case 43:
-# line 232 "<stdin>"
-{
-                        xlation[myesc( yytext )] =
-                                (new_xlation ? nuxlatns : -nuxlatns);
-                        new_xlation = false;
-                        }
-	YY_BREAK
-case 44:
-# line 237 "<stdin>"
-{
-                        xlation[yytext[0]] =
-                                (new_xlation ? nuxlatns : -nuxlatns);
-                        new_xlation = false;
-                        }
-	YY_BREAK
-case 45:
-# line 243 "<stdin>"
-++linenum;
-	YY_BREAK
-case 46:
-*yy_cp = yy_hold_char; /* undo effects of setting up yytext */
-yy_c_buf_p = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-# line 246 "<stdin>"
-{
-                        ++linenum;
-                        ACTION_ECHO;
-                        MARK_END_OF_PROLOG;
-                        BEGIN(SECT2);
-                        }
-	YY_BREAK
-case 47:
-# line 253 "<stdin>"
-++linenum; ACTION_ECHO;
-	YY_BREAK
-case YY_STATE_EOF(SECT2PROLOG):
-# line 255 "<stdin>"
-MARK_END_OF_PROLOG; yyterminate();
-	YY_BREAK
-case 49:
-# line 257 "<stdin>"
-++linenum; /* allow blank lines in section 2 */
-	YY_BREAK
-case 50:
-# line 259 "<stdin>"
-{
-                        indented_code = (yytext[0] != '%');
-                        doing_codeblock = true;
-                        bracelevel = 1;
- 
-                        if ( indented_code )
-                            ACTION_ECHO;
- 
-                        BEGIN(CODEBLOCK_2);
-                        }
-	YY_BREAK
-case 51:
-# line 270 "<stdin>"
-BEGIN(SC); return ( '<' );
-	YY_BREAK
-case 52:
-# line 271 "<stdin>"
-return ( '^' );
-	YY_BREAK
-case 53:
-# line 272 "<stdin>"
-BEGIN(QUOTE); return ( '"' );
-	YY_BREAK
-case 54:
-*yy_cp = yy_hold_char; /* undo effects of setting up yytext */
-yy_c_buf_p = yy_cp = yy_bp + 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-# line 273 "<stdin>"
-BEGIN(NUM); return ( '{' );
-	YY_BREAK
-case 55:
-# line 274 "<stdin>"
-BEGIN(BRACEERROR);
-	YY_BREAK
-case 56:
-*yy_cp = yy_hold_char; /* undo effects of setting up yytext */
-yy_c_buf_p = yy_cp = yy_bp + 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-# line 275 "<stdin>"
-return ( '$' );
-	YY_BREAK
-case 57:
-# line 277 "<stdin>"
-{
-                        bracelevel = 1;
-                        BEGIN(PERCENT_BRACE_ACTION);
-                        return ( '\n' );
-                        }
-	YY_BREAK
-case 58:
-# line 282 "<stdin>"
-cntdactn = true; ++linenum; return ( '\n' );
-	YY_BREAK
-case 59:
-# line 284 "<stdin>"
-{
-                        /* this rule is separate from the one below because
-                         * otherwise we get variable trailing context, so
-                         * we can't build the scanner using -{f,F}
-                         */
-                        bracelevel = 0;
-                        cntdactn = false;
-                        BEGIN(ACTION);
-                        return ( '\n' );
-                        }
-	YY_BREAK
-case 60:
-*yy_cp = yy_hold_char; /* undo effects of setting up yytext */
-yy_c_buf_p = yy_cp -= 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-# line 295 "<stdin>"
-{
-                        bracelevel = 0;
-                        cntdactn = false;
-                        BEGIN(ACTION);
-                        return ( '\n' );
-                        }
-	YY_BREAK
-case 61:
-# line 302 "<stdin>"
-++linenum; return ( '\n' );
-	YY_BREAK
-case 62:
-# line 304 "<stdin>"
-return ( EOF_OP );
-	YY_BREAK
-case 63:
-# line 306 "<stdin>"
-{
-                        sectnum = 3;
-                        BEGIN(SECT3);
-                        return ( EOF ); /* to stop the parser */
-                        }
-	YY_BREAK
-case 64:
-# line 312 "<stdin>"
-{
-                        int cclval;
- 
-                        (void) strcpy( nmstr, (char *) yytext );
- 
-                        /* check to see if we've already encountered this ccl */
-                        if ( (cclval = ccllookp( (Char *) nmstr )) )
-                            {
-                            yylval = cclval;
-                            ++cclreuse;
-                            return ( PREVCCL );
-                            }
-                        else
-                            {
-                            /* we fudge a bit.  We know that this ccl will
-                             * soon be numbered as lastccl + 1 by cclinit
-                             */
-                            cclnstal( (Char *) nmstr, lastccl + 1 );
- 
-                            /* push back everything but the leading bracket
-                             * so the ccl can be rescanned
-                             */
-                            PUT_BACK_STRING((Char *) nmstr, 1);
- 
-                            BEGIN(FIRSTCCL);
-                            return ( '[' );
-                            }
-                        }
-	YY_BREAK
-case 65:
-# line 341 "<stdin>"
-{
-                        register Char *nmdefptr;
-                        Char *ndlookup();
- 
-                        (void) strcpy( nmstr, (char *) yytext );
-                        nmstr[yyleng - 1] = '\0';  /* chop trailing brace */
- 
-                        /* lookup from "nmstr + 1" to chop leading brace */
-                        if ( ! (nmdefptr = ndlookup( nmstr + 1 )) )
-                            synerr( "undefined {name}" );
- 
-                        else
-                            { /* push back name surrounded by ()'s */
-                            unput(')');
-                            PUT_BACK_STRING(nmdefptr, 0);
-                            unput('(');
-                            }
-                        }
-	YY_BREAK
-case 66:
-# line 360 "<stdin>"
-return ( yytext[0] );
-	YY_BREAK
-case 67:
-# line 361 "<stdin>"
-RETURNCHAR;
-	YY_BREAK
-case 68:
-# line 362 "<stdin>"
-++linenum; return ( '\n' );
-	YY_BREAK
-case 69:
-# line 365 "<stdin>"
-return ( ',' );
-	YY_BREAK
-case 70:
-# line 366 "<stdin>"
-BEGIN(SECT2); return ( '>' );
-	YY_BREAK
-case 71:
-*yy_cp = yy_hold_char; /* undo effects of setting up yytext */
-yy_c_buf_p = yy_cp = yy_bp + 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-# line 367 "<stdin>"
-BEGIN(CARETISBOL); return ( '>' );
-	YY_BREAK
-case 72:
-# line 368 "<stdin>"
-RETURNNAME;
-	YY_BREAK
-case 73:
-# line 369 "<stdin>"
-synerr( "bad start condition name" );
-	YY_BREAK
-case 74:
-# line 371 "<stdin>"
-BEGIN(SECT2); return ( '^' );
-	YY_BREAK
-case 75:
-# line 374 "<stdin>"
-RETURNCHAR;
-	YY_BREAK
-case 76:
-# line 375 "<stdin>"
-BEGIN(SECT2); return ( '"' );
-	YY_BREAK
-case 77:
-# line 377 "<stdin>"
-{
-                        synerr( "missing quote" );
-                        BEGIN(SECT2);
-                        ++linenum;
-                        return ( '"' );
-                        }
-	YY_BREAK
-case 78:
-*yy_cp = yy_hold_char; /* undo effects of setting up yytext */
-yy_c_buf_p = yy_cp = yy_bp + 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-# line 385 "<stdin>"
-BEGIN(CCL); return ( '^' );
-	YY_BREAK
-case 79:
-*yy_cp = yy_hold_char; /* undo effects of setting up yytext */
-yy_c_buf_p = yy_cp = yy_bp + 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-# line 386 "<stdin>"
-return ( '^' );
-	YY_BREAK
-case 80:
-# line 387 "<stdin>"
-BEGIN(CCL); yylval = '-'; return ( CHAR );
-	YY_BREAK
-case 81:
-# line 388 "<stdin>"
-BEGIN(CCL); RETURNCHAR;
-	YY_BREAK
-case 82:
-*yy_cp = yy_hold_char; /* undo effects of setting up yytext */
-yy_c_buf_p = yy_cp = yy_bp + 1;
-YY_DO_BEFORE_ACTION; /* set up yytext again */
-# line 390 "<stdin>"
-return ( '-' );
-	YY_BREAK
-case 83:
-# line 391 "<stdin>"
-RETURNCHAR;
-	YY_BREAK
-case 84:
-# line 392 "<stdin>"
-BEGIN(SECT2); return ( ']' );
-	YY_BREAK
-case 85:
-# line 395 "<stdin>"
-{
-                        yylval = myctoi( yytext );
-                        return ( NUMBER );
-                        }
-	YY_BREAK
-case 86:
-# line 400 "<stdin>"
-return ( ',' );
-	YY_BREAK
-case 87:
-# line 401 "<stdin>"
-BEGIN(SECT2); return ( '}' );
-	YY_BREAK
-case 88:
-# line 403 "<stdin>"
-{
-                        synerr( "bad character inside {}'s" );
-                        BEGIN(SECT2);
-                        return ( '}' );
-                        }
-	YY_BREAK
-case 89:
-# line 409 "<stdin>"
-{
-                        synerr( "missing }" );
-                        BEGIN(SECT2);
-                        ++linenum;
-                        return ( '}' );
-                        }
-	YY_BREAK
-case 90:
-# line 417 "<stdin>"
-synerr( "bad name in {}'s" ); BEGIN(SECT2);
-	YY_BREAK
-case 91:
-# line 418 "<stdin>"
-synerr( "missing }" ); ++linenum; BEGIN(SECT2);
-	YY_BREAK
-case 92:
-# line 421 "<stdin>"
-bracelevel = 0;
-	YY_BREAK
-case 93:
-# line 422 "<stdin>"
-{
-                        ACTION_ECHO;
-                        CHECK_REJECT(yytext);
-                        }
-	YY_BREAK
-case 94:
-# line 426 "<stdin>"
-{
-                        ACTION_ECHO;
-                        CHECK_YYMORE(yytext);
-                        }
-	YY_BREAK
-case 95:
-# line 430 "<stdin>"
-ACTION_ECHO;
-	YY_BREAK
-case 96:
-# line 431 "<stdin>"
-{
-                        ++linenum;
-                        ACTION_ECHO;
-                        if ( bracelevel == 0 ||
-                             (doing_codeblock && indented_code) )
-                            {
-                            if ( ! doing_codeblock )
-                                fputs( "\tYY_BREAK\n", tmpactfl );
- 
-                            doing_codeblock = false;
-                            BEGIN(SECT2);
-                            }
-                        }
-	YY_BREAK
-        /* Reject and YYmore() are checked for above, in PERCENT_BRACE_ACTION */
-case 97:
-# line 447 "<stdin>"
-ACTION_ECHO; ++bracelevel;
-	YY_BREAK
-case 98:
-# line 448 "<stdin>"
-ACTION_ECHO; --bracelevel;
-	YY_BREAK
-case 99:
-# line 449 "<stdin>"
-ACTION_ECHO;
-	YY_BREAK
-case 100:
-# line 450 "<stdin>"
-ACTION_ECHO;
-	YY_BREAK
-case 101:
-# line 451 "<stdin>"
-ACTION_ECHO; BEGIN(ACTION_COMMENT);
-	YY_BREAK
-case 102:
-# line 452 "<stdin>"
-ACTION_ECHO; /* character constant */
-	YY_BREAK
-case 103:
-# line 453 "<stdin>"
-ACTION_ECHO; BEGIN(ACTION_STRING);
-	YY_BREAK
-case 104:
-# line 454 "<stdin>"
-{
-                        ++linenum;
-                        ACTION_ECHO;
-                        if ( bracelevel == 0 )
-                            {
-                            fputs( "\tYY_BREAK\n", tmpactfl );
-                            BEGIN(SECT2);
-                            }
-                        }
-	YY_BREAK
-case 105:
-# line 463 "<stdin>"
-ACTION_ECHO;
-	YY_BREAK
-case 106:
-# line 465 "<stdin>"
-ACTION_ECHO; BEGIN(ACTION);
-	YY_BREAK
-case 107:
-# line 466 "<stdin>"
-ACTION_ECHO;
-	YY_BREAK
-case 108:
-# line 467 "<stdin>"
-ACTION_ECHO;
-	YY_BREAK
-case 109:
-# line 468 "<stdin>"
-++linenum; ACTION_ECHO;
-	YY_BREAK
-case 110:
-# line 469 "<stdin>"
-ACTION_ECHO;
-	YY_BREAK
-case 111:
-# line 471 "<stdin>"
-ACTION_ECHO;
-	YY_BREAK
-case 112:
-# line 472 "<stdin>"
-ACTION_ECHO;
-	YY_BREAK
-case 113:
-# line 473 "<stdin>"
-++linenum; ACTION_ECHO;
-	YY_BREAK
-case 114:
-# line 474 "<stdin>"
-ACTION_ECHO; BEGIN(ACTION);
-	YY_BREAK
-case 115:
-# line 475 "<stdin>"
-ACTION_ECHO;
-	YY_BREAK
-case YY_STATE_EOF(ACTION):
-case YY_STATE_EOF(ACTION_COMMENT):
-case YY_STATE_EOF(ACTION_STRING):
-# line 477 "<stdin>"
-{
-                        synerr( "EOF encountered inside an action" );
-                        yyterminate();
-                        }
-	YY_BREAK
-case 117:
-# line 483 "<stdin>"
-{
-                        yylval = myesc( yytext );
-                        return ( CHAR );
-                        }
-	YY_BREAK
-case 118:
-# line 488 "<stdin>"
-{
-                        yylval = myesc( yytext );
-                        BEGIN(CCL);
-                        return ( CHAR );
-                        }
-	YY_BREAK
-case 119:
-# line 495 "<stdin>"
-ECHO;
-	YY_BREAK
-case 120:
-# line 496 "<stdin>"
-YY_FATAL_ERROR( "flex scanner jammed" );
-	YY_BREAK
-case YY_STATE_EOF(INITIAL):
-case YY_STATE_EOF(SECT2):
-case YY_STATE_EOF(SECT3):
-case YY_STATE_EOF(CODEBLOCK):
-case YY_STATE_EOF(PICKUPDEF):
-case YY_STATE_EOF(SC):
-case YY_STATE_EOF(CARETISBOL):
-case YY_STATE_EOF(NUM):
-case YY_STATE_EOF(QUOTE):
-case YY_STATE_EOF(FIRSTCCL):
-case YY_STATE_EOF(CCL):
-case YY_STATE_EOF(RECOVER):
-case YY_STATE_EOF(BRACEERROR):
-case YY_STATE_EOF(C_COMMENT):
-case YY_STATE_EOF(PERCENT_BRACE_ACTION):
-case YY_STATE_EOF(USED_LIST):
-case YY_STATE_EOF(CODEBLOCK_2):
-case YY_STATE_EOF(XLATION):
-    yyterminate();
- 
-            case YY_END_OF_BUFFER:
-                {
-                /* amount of text matched not including the EOB char */
-                int yy_amount_of_matched_text = yy_cp - yytext - 1;
- 
-                /* undo the effects of YY_DO_BEFORE_ACTION */
-                *yy_cp = yy_hold_char;
- 
-                /* note that here we test for yy_c_buf_p "<=" to the position
-                 * of the first EOB in the buffer, since yy_c_buf_p will
-                 * already have been incremented past the NUL character
-                 * (since all states make transitions on EOB to the end-
-                 * of-buffer state).  Contrast this with the test in yyinput().
-                 */
-                if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] )
-                    /* this was really a NUL */
-                    {
-                    yy_ste_type yy_next_state;
- 
-                    yy_c_buf_p = yytext + yy_amount_of_matched_text;
- 
-                    yy_current_state = yy_get_previous_state();
- 
-                    /* okay, we're now positioned to make the
-                     * NUL transition.  We couldn't have
-                     * yy_get_previous_state() go ahead and do it
-                     * for us because it doesn't know how to deal
-                     * with the possibility of jamming (and we
-                     * don't want to build jamming into it because
-                     * then it will run more slowly)
-                     */
- 
-                    yy_next_state = yy_try_NUL_trans( yy_current_state );
- 
-                    yy_bp = yytext + YY_MORE_ADJ;
- 
-                    if ( yy_next_state )
-                        {
-                        /* consume the NUL */
-                        yy_cp = ++yy_c_buf_p;
-                        yy_current_state = yy_next_state;
-                        goto yy_match;
-                        }
- 
-                    else
-                        {
-			    yy_cp = yy_last_accepting_cpos;
-			    yy_current_state = yy_last_accepting_state;
-                        goto yy_find_action;
-                        }
-                    }
- 
-                else switch ( yy_get_next_buffer() )
-                    {
-                    case EOB_ACT_END_OF_FILE:
-                        {
-                        yy_did_buffer_switch_on_eof = 0;
- 
-                        if ( yywrap() )
-                            {
-                            /* note: because we've taken care in
-                             * yy_get_next_buffer() to have set up yytext,
-                             * we can now set up yy_c_buf_p so that if some
-                             * total hoser (like flex itself) wants
-                             * to call the scanner after we return the
-                             * YY_NULL, it'll still work - another YY_NULL
-                             * will get returned.
-                             */
-                            yy_c_buf_p = yytext + YY_MORE_ADJ;
- 
-                            yy_act = YY_STATE_EOF((yy_start - 1) / 2);
-                            goto do_action;
-                            }
- 
-                        else
-                            {
-                            if ( ! yy_did_buffer_switch_on_eof )
-                                YY_NEW_FILE;
-                            }
-                        }
-                        break;
- 
-                    case EOB_ACT_CONTINUE_SCAN:
-                        yy_c_buf_p = yytext + yy_amount_of_matched_text;
- 
-                        yy_current_state = yy_get_previous_state();
- 
-                        yy_cp = yy_c_buf_p;
-                        yy_bp = yytext + YY_MORE_ADJ;
-                        goto yy_match;
- 
-                    case EOB_ACT_LAST_MATCH:
-                        yy_c_buf_p =
-                            &yy_current_buffer->yy_ch_buf[yy_n_chars];
- 
-                        yy_current_state = yy_get_previous_state();
- 
-                        yy_cp = yy_c_buf_p;
-                        yy_bp = yytext + YY_MORE_ADJ;
-                        goto yy_find_action;
-                    }
-                break;
-                }
- 
-            default:
-#ifdef FLEX_DEBUG
-                printf( "action # %d\n", yy_act );
-#endif
-                YY_FATAL_ERROR(
-                        "fatal flex scanner internal error--no action found" );
-            }
-        }
-    }
- 
- 
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * synopsis
- *     int yy_get_next_buffer();
- *
- * returns a code representing an action
- *     EOB_ACT_LAST_MATCH -
- *     EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- *     EOB_ACT_END_OF_FILE - end of file
- */
- 
-static int yy_get_next_buffer()
- 
-    {
-    register YY_CHAR *dest = yy_current_buffer->yy_ch_buf;
-    register YY_CHAR *source = yytext - 1; /* copy prev. char, too */
-    register int number_to_move, i;
-    int ret_val;
- 
-    if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] )
-        YY_FATAL_ERROR(
-                "fatal flex scanner internal error--end of buffer missed" );
- 
-    /* try to read more data */
- 
-    /* first move last chars to start of buffer */
-    number_to_move = yy_c_buf_p - yytext;
- 
-    for ( i = 0; i < number_to_move; ++i )
-        *(dest++) = *(source++);
- 
-    if ( yy_current_buffer->yy_eof_status != EOF_NOT_SEEN )
-        /* don't do the read, it's not guaranteed to return an EOF,
-         * just force an EOF
-         */
-        yy_n_chars = 0;
- 
-    else
-        {
-        int num_to_read = yy_current_buffer->yy_buf_size - number_to_move - 1;
- 
-        if ( num_to_read > YY_READ_BUF_SIZE )
-            num_to_read = YY_READ_BUF_SIZE;
- 
-        else if ( num_to_read <= 0 )
-            YY_FATAL_ERROR( "fatal error - scanner input buffer overflow" );
- 
-        /* read in more data */
-        YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]),
-                  yy_n_chars, num_to_read );
-        }
- 
-    if ( yy_n_chars == 0 )
-        {
-        if ( number_to_move == 1 )
-            {
-            ret_val = EOB_ACT_END_OF_FILE;
-            yy_current_buffer->yy_eof_status = EOF_DONE;
-            }
- 
-        else
-            {
-            ret_val = EOB_ACT_LAST_MATCH;
-            yy_current_buffer->yy_eof_status = EOF_PENDING;
-            }
-        }
- 
-    else
-        ret_val = EOB_ACT_CONTINUE_SCAN;
- 
-    yy_n_chars += number_to_move;
-    yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR;
-    yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR;
- 
-    /* yytext begins at the second character in yy_ch_buf; the first
-     * character is the one which preceded it before reading in the latest
-     * buffer; it needs to be kept around in case it's a newline, so
-     * yy_get_previous_state() will have with '^' rules active
-     */
- 
-    yytext = &yy_current_buffer->yy_ch_buf[1];
- 
-    return ( ret_val );
-    }
- 
- 
-/* yy_get_previous_state - get the state just before the EOB char was reached
- *
- * synopsis
- *     yy_ste_type yy_get_previous_state();
- */
- 
-static yy_ste_type yy_get_previous_state()
- 
-    {
-    register yy_ste_type yy_current_state;
-    register YY_CHAR *yy_cp;
- 
-    register YY_CHAR *yy_bp = yytext;
- 
-    yy_current_state = yy_start;
-    if ( yy_bp[-1] == '\n' )
-	++yy_current_state;
- 
-    for ( yy_cp = yytext + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp )
-        {
-	register YY_CHAR yy_c = (*yy_cp ? yy_ec[*yy_cp] : 1);
-	if ( yy_accept[yy_current_state] )
-	    {
-	    yy_last_accepting_state = yy_current_state;
-	    yy_last_accepting_cpos = yy_cp;
-	    }
-	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-	    {
-	    yy_current_state = yy_def[yy_current_state];
-	    }
-	yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c];
-        }
- 
-    return ( yy_current_state );
-    }
- 
- 
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- *     next_state = yy_try_NUL_trans( current_state );
- */
- 
-#ifdef YY_USE_PROTOS
-static yy_ste_type yy_try_NUL_trans( register yy_ste_type yy_current_state )
-#else
-static yy_ste_type yy_try_NUL_trans( yy_current_state )
-register yy_ste_type yy_current_state;
-#endif
- 
-    {
-    register int yy_is_jam;
-    register YY_CHAR *yy_cp = yy_c_buf_p;
- 
-    register YY_CHAR yy_c = 1;
-    if ( yy_accept[yy_current_state] )
-	{
-	yy_last_accepting_state = yy_current_state;
-	yy_last_accepting_cpos = yy_cp;
-	}
-    while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
-	{
-	yy_current_state = yy_def[yy_current_state];
-	}
-    yy_current_state = yy_nxt[yy_base[yy_current_state] + yy_c];
-    yy_is_jam = (yy_current_state == 340);
- 
-    return ( yy_is_jam ? 0 : yy_current_state );
-    }
- 
- 
-#ifdef YY_USE_PROTOS
-static void yyunput( YY_CHAR c, register YY_CHAR *yy_bp )
-#else
-static void yyunput( c, yy_bp )
-YY_CHAR c;
-register YY_CHAR *yy_bp;
-#endif
- 
-    {
-    register YY_CHAR *yy_cp = yy_c_buf_p;
- 
-    /* undo effects of setting up yytext */
-    *yy_cp = yy_hold_char;
- 
-    if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-        { /* need to shift things up to make room */
-        register int number_to_move = yy_n_chars + 2; /* +2 for EOB chars */
-        register YY_CHAR *dest =
-            &yy_current_buffer->yy_ch_buf[yy_current_buffer->yy_buf_size + 2];
-        register YY_CHAR *source =
-            &yy_current_buffer->yy_ch_buf[number_to_move];
- 
-        while ( source > yy_current_buffer->yy_ch_buf )
-            *--dest = *--source;
- 
-        yy_cp += dest - source;
-        yy_bp += dest - source;
-        yy_n_chars = yy_current_buffer->yy_buf_size;
- 
-        if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
-            YY_FATAL_ERROR( "flex scanner push-back overflow" );
-        }
- 
-    if ( yy_cp > yy_bp && yy_cp[-1] == '\n' )
-        yy_cp[-2] = '\n';
- 
-    *--yy_cp = c;
- 
-    /* note: the formal parameter *must* be called "yy_bp" for this
-     *       macro to now work correctly
-     */
-    YY_DO_BEFORE_ACTION; /* set up yytext again */
-    }
- 
- 
-#ifdef __cplusplus
-static int yyinput()
-#else
-static int input()
-#endif
- 
-    {
-    int c;
-    YY_CHAR *yy_cp = yy_c_buf_p;
- 
-    *yy_cp = yy_hold_char;
- 
-    if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR )
-        {
-        /* yy_c_buf_p now points to the character we want to return.
-         * If this occurs *before* the EOB characters, then it's a
-         * valid NUL; if not, then we've hit the end of the buffer.
-         */
-        if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] )
-            /* this was really a NUL */
-            *yy_c_buf_p = '\0';
- 
-        else
-            { /* need more input */
-            yytext = yy_c_buf_p;
-            ++yy_c_buf_p;
- 
-            switch ( yy_get_next_buffer() )
-                {
-                case EOB_ACT_END_OF_FILE:
-                    {
-                    if ( yywrap() )
-                        {
-                        yy_c_buf_p = yytext + YY_MORE_ADJ;
-                        return ( EOF );
-                        }
- 
-                    YY_NEW_FILE;
- 
-#ifdef __cplusplus
-                    return ( yyinput() );
-#else
-                    return ( input() );
-#endif
-                    }
-                    break;
- 
-                case EOB_ACT_CONTINUE_SCAN:
-                    yy_c_buf_p = yytext + YY_MORE_ADJ;
-                    break;
- 
-                case EOB_ACT_LAST_MATCH:
-#ifdef __cplusplus
-                    YY_FATAL_ERROR( "unexpected last match in yyinput()" );
-#else
-                    YY_FATAL_ERROR( "unexpected last match in input()" );
-#endif
-                }
-            }
-        }
- 
-    c = *yy_c_buf_p;
-    yy_hold_char = *++yy_c_buf_p;
- 
-    return ( c );
-    }
- 
- 
-#ifdef YY_USE_PROTOS
-void yyrestrt( FILE *input_file )
-#else
-void yyrestrt( input_file )
-FILE *input_file;
-#endif
- 
-    {
-    yyinbffr( yy_current_buffer, input_file );
-    yyldbfst();
-    }
- 
- 
-#ifdef YY_USE_PROTOS
-void yyswtobf( YY_BUFFER_STATE new_buffer )
-#else
-void yyswtobf( new_buffer )
-YY_BUFFER_STATE new_buffer;
-#endif
- 
-    {
-    if ( yy_current_buffer == new_buffer )
-        return;
- 
-    if ( yy_current_buffer )
-        {
-        /* flush out information for old buffer */
-        *yy_c_buf_p = yy_hold_char;
-        yy_current_buffer->yy_buf_pos = yy_c_buf_p;
-        yy_current_buffer->yy_n_chars = yy_n_chars;
-        }
- 
-    yy_current_buffer = new_buffer;
-    yyldbfst();
- 
-    /* we don't actually know whether we did this switch during
-     * EOF (yywrap()) processing, but the only time this flag
-     * is looked at is after yywrap() is called, so it's safe
-     * to go ahead and always set it.
-     */
-    yy_did_buffer_switch_on_eof = 1;
-    }
- 
- 
-#ifdef YY_USE_PROTOS
-void yyldbfst( void )
-#else
-void yyldbfst()
-#endif
- 
-    {
-    yy_n_chars = yy_current_buffer->yy_n_chars;
-    yytext = yy_c_buf_p = yy_current_buffer->yy_buf_pos;
-    yyin = yy_current_buffer->yy_input_file;
-    yy_hold_char = *yy_c_buf_p;
-    }
- 
- 
-#ifdef YY_USE_PROTOS
-YY_BUFFER_STATE yycrbffr( FILE *file, int size )
-#else
-YY_BUFFER_STATE yycrbffr( file, size )
-FILE *file;
-int size;
-#endif
- 
-    {
-    YY_BUFFER_STATE b;
- 
-    b = (YY_BUFFER_STATE) malloc( sizeof( struct yy_buffer_state ) );
- 
-    if ( ! b )
-        YY_FATAL_ERROR( "out of dynamic memory in yycrbffr()" );
- 
-    b->yy_buf_size = size;
- 
-    /* yy_ch_buf has to be 2 characters longer than the size given because
-     * we need to put in 2 end-of-buffer characters.
-     */
-    b->yy_ch_buf = (YY_CHAR *) malloc( (unsigned) (b->yy_buf_size + 2) );
- 
-    if ( ! b->yy_ch_buf )
-        YY_FATAL_ERROR( "out of dynamic memory in yycrbffr()" );
- 
-    yyinbffr( b, file );
- 
-    return ( b );
-    }
- 
- 
-#ifdef YY_USE_PROTOS
-void yydlbffr( YY_BUFFER_STATE b )
-#else
-void yydlbffr( b )
-YY_BUFFER_STATE b;
-#endif
- 
-    {
-    if ( b == yy_current_buffer )
-        yy_current_buffer = (YY_BUFFER_STATE) 0;
- 
-    free( (char *) b->yy_ch_buf );
-    free( (char *) b );
-    }
- 
- 
-#ifdef YY_USE_PROTOS
-void yyinbffr( YY_BUFFER_STATE b, FILE *file )
-#else
-void yyinbffr( b, file )
-YY_BUFFER_STATE b;
-FILE *file;
-#endif
- 
-    {
-    b->yy_input_file = file;
- 
-    /* we put in the '\n' and start reading from [1] so that an
-     * initial match-at-newline will be true.
-     */
- 
-    b->yy_ch_buf[0] = '\n';
-    b->yy_n_chars = 1;
- 
-    /* we always need two end-of-buffer characters.  The first causes
-     * a transition to the end-of-buffer state.  The second causes
-     * a jam in that state.
-     */
-    b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-    b->yy_ch_buf[2] = YY_END_OF_BUFFER_CHAR;
- 
-    b->yy_buf_pos = &b->yy_ch_buf[1];
- 
-    b->yy_eof_status = EOF_NOT_SEEN;
-    }
-# line 496 "<stdin>"
- 
- 
- 
-int yywrap()
- 
-    {
-    if ( --ninfiles > 0 )
-        {
-        stinpfle( *++inp_fles );
-        return ( 0 );
-        }
- 
-    else
-        return ( 1 );
-    }
- 
- 
-/* stinpfle - open the given file (if NULL, stdin) for scanning */
- 
-void stinpfle( file )
-char *file;
- 
-    {
-    if ( file )
-        {
-        infilnam = file;
-        yyin = fopen( infilnam, "r" );
- 
-        if ( yyin == NULL )
-            lerrsf( "can't open %s", file );
-        }
- 
-    else
-        {
-        yyin = stdin;
-        infilnam = "<stdin>";
-        }
-    }
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/MVS/unfixit.l b/WebKitTools/android/flex-2.5.4a/MISC/MVS/unfixit.l
deleted file mode 100644
index 3f8dddc..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/MVS/unfixit.l
+++ /dev/null
@@ -1,141 +0,0 @@
-%{
-/* unfixit.l - convert shortened external names to names back to their 
- *             original names.  (See fixit.l)
- */
-
-/* 
- * This program is included to satisfy "dumb" compilers/linkers which 
- * do not know about externals of names longer than 8 bytes.
- *
- *  Steven W. Layten
- *  Chemical Abstracts Service
- *  PO BOX 3012
- *  Columbus, OH 43210
- */
-%}
-%%
-"actfilnm"		printf("action_file_name");
-"actnout"		printf("action_out");
-"addacpt"		printf("add_accept");
-"alllower"		printf("all_lower");
-"allupper"		printf("all_upper");
-"allocarr"		printf("allocate_array");
-"asscrule"		printf("assoc_rule");
-"bktrkfil"		printf("backtrack_file");
-"bktrkrep"		printf("backtrack_report");
-"bol_nded"		printf("bol_needed");
-"bldeofac"		printf("build_eof_action");
-"cclnstal"		printf("cclinstal");
-"ccllookp"		printf("ccllookup");
-"cclnegat"		printf("cclnegate");
-"cclsrted"		printf("cclsorted");
-"ck4bktrk"		printf("check_for_backtracking");
-"cktrlcnt"		printf("check_trailing_context");
-"cntdactn"		printf("continued_action");
-"copystrn"		printf("copy_string");
-"cpunsstr"		printf("copy_unsigned_string");
-"cpyrght"		printf("copyright");
-"copysngl"		printf("copysingl");
-"c_mx_ccl"		printf("current_max_ccl_tbl_size");
-"c_mx_dfa"		printf("current_max_dfa_size");
-"c_mxdfas"		printf("current_max_dfas");
-"curmxrls"		printf("current_max_rules");
-"c_mx_scs"		printf("current_max_scs");
-"c_mx_tmp"		printf("current_max_template_xpairs");
-"c_mx_xpr"		printf("current_max_xpairs");
-"c_mxccls"		printf("current_maxccls");
-"curr_mns"		printf("current_mns");
-"cursttyp"		printf("current_state_type");
-"datflush"		printf("dataflush");
-"dfacunin"		printf("dfaacc_union");
-"do_indnt"		printf("do_indent");
-"dmpasrl"		printf("dump_associated_rules");
-"dmptrns"		printf("dump_transitions");
-"dupmach"		printf("dupmachine");
-"ecsfrmxt"		printf("ecs_from_xlation");
-"eobstate"		printf("end_of_buffer_state");
-"epsclos"		printf("epsclosure");
-"expnxtck"		printf("expand_nxt_chk");
-"fndtblsp"		printf("find_table_space");
-"fnshrule"		printf("finish_rule");
-"firstfre"		printf("firstfree");
-"firstprt"		printf("firstprot");
-"flxgettm"		printf("flex_gettime");
-"flxerror"		printf("flexerror");
-"flxfatal"		printf("flexfatal");
-"fmtptmsg"		printf("format_pinpoint_message");
-"gnNULtrn"		printf("gen_NUL_trans");
-"gnbktrkg"		printf("gen_backtracking");
-"gnbtactn"		printf("gen_bt_action");
-"gnfndact"		printf("gen_find_action");
-"gnlindir"		printf("gen_line_dirs");
-"gnnxcste"		printf("gen_next_compressed_state");
-"gnnxmtch"		printf("gen_next_match");
-"gnnxtst"		printf("gen_next_state");
-"gnstrtst"		printf("gen_start_state");
-"hshentry"		printf("hash_entry");
-"hshfct"			printf("hashfunct");
-"incmxdfa"		printf("increase_max_dfas");
-"indput2s"		printf("indent_put2s");
-"indputs"		printf("indent_puts");
-"infilnam"		printf("infilename");
-"inp_fles"		printf("input_files");
-"intractv"		printf("interactive");
-"lndirout"		printf("line_directive_out");
-"lnkmchns"		printf("link_machines");
-"lst_cset"		printf("list_character_set");
-"maketbls"		printf("make_tables");
-"mkbgnorm"		printf("mark_beginning_as_normal");
-"mktmplat"		printf("mktemplate");
-"nbktrckg"		printf("num_backtracking");
-"ninfiles"		printf("num_input_files");
-"numraloc"		printf("num_reallocs");
-"numrules"		printf("num_rules");
-"nuxlatns"		printf("num_xlations");
-"numnpair"		printf("numsnpairs");
-"outfilnm"		printf("output_file_name");
-"peakpair"		printf("peakpairs");
-"perf_rep"		printf("performance_report");
-"pptmsg"		printf("pinpoint_message");
-"plcstate"		printf("place_state");
-"prvctdan"		printf("previous_continued_action");
-"prtstats"		printf("printstats");
-"pgm_name"		printf("program_name");
-"prtcomst"		printf("protcomst");
-"rdblefrm"		printf("readable_form");
-"realrjct"		printf("real_reject");
-"rallocar"		printf("reallocate_array");
-"rjctused"		printf("reject_really_used");
-"rulelnno"		printf("rule_linenum");
-"ruletype"		printf("rule_type");
-"stinpfle"		printf("set_input_file");
-"setupia"		printf("set_up_initial_allocations");
-"startime"		printf("starttime");
-"ste_type"		printf("state_type");
-"symfollo"		printf("symfollowset");
-"sympartn"		printf("sympartition");
-"syntxerr"		printf("syntaxerror");
-"tmpactfl"		printf("temp_action_file");
-"todohead"		printf("todo_head");
-"todonext"		printf("todo_next");
-"trnschar"		printf("transchar");
-"trnstout"		printf("transition_struct_out");
-"trlcntxt"		printf("trlcontxt");
-"vtrailrl"		printf("variable_trail_rule");
-"vtrlctrl"		printf("variable_trailing_context_rules");
-"varlngth"		printf("varlength");
-"yycrbffr"		printf("yy_create_buffer");
-"yydlbffr"		printf("yy_delete_buffer");
-"yyinbffr"		printf("yy_init_buffer");
-"yyldbfst"		printf("yy_load_buffer_state");
-"yyswtobf"		printf("yy_switch_to_buffer");
-"yyerrflg"		printf("yyerrflag");
-"yymrreus"		printf("yymore_really_used");
-"yymrused"		printf("yymore_used");
-"yyrestrt"		printf("yyrestart");
-. ECHO;
-%%
-main()
-{
-    yylex();
-}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/THINK_C_notes b/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/THINK_C_notes
deleted file mode 100644
index e99c972..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/THINK_C_notes
+++ /dev/null
@@ -1,100 +0,0 @@
-Notes on the THINK C version of Flex 2.4.6
-Scott Hofmann 23-JUL-94
-Internet: scotth@visix.com
-
-The only changes needed to compile Flex 2.4.6 under Symantec C++ 6.0 was
-to #include <console.h> in main.c and call ccommand() just before flexinit()
-in main(). The notes below are mostly of historical significance only; most
-of the workarounds below were to get around restrictions/problems in earlier
-versions of THINK C. The only section which still applies is Russell Finn's 
-description of how to make Flex generate output of type 'KAHL'. Also, 4-byte
-ints must be used by any project which uses Flex output.
-
-If you want to recreate the project, you'll need to add the files 
-alloca.c and xmalloc.c in this directory. Both files are copylefted; see
-the GNU General Public License for details. You will also need to recompile
-both the ANSI and unix libraries to use 4 byte ints, and if you want the
-files that flex creates to have 'KAHL' as the creator you'll need to apply
-Russell Finn's patch.
-
-Notes on the THINK C version of Flex 2.3.7
-Jonas Barklund, 25-JAN-92
-Internet: jonas@csd.uu.se
-
-I have merged the sources for Flex version 2.3.7 with the older version
-which was hacked for THINK C version 4. I have conditionalized the code
-so that I think it should work with both THINK C version 4 and 5 (for
-those of you who don't know: the THINK_C symbol is defined as 1 in version
-4 and as 5 in version 5). I have put in some missing prototypes, so it
-compiles also with "require prototypes" on.
-
-Most of the notes below still apply, in particular that about the MakeRes
-program.
-
-
-Notes on the THINK C version of Flex
-Russell S. Finn, 19-FEB-90
-Internet: rsfinn@athena.mit.edu, rsfinn@neutron.lcs.mit.edu
-CompuServe: 76377,1107
-GEnie: RSFINN
-
-Flex appears to be covered by a copyright notice from the University of
-California, similar to the one covering Berkeley Unix; the Free Software
-Foundation is not part of the picture here.  So here is a version
-created with THINK C 4.0, along with the source code; as with the
-Bison distribution, I am including *all* of the source code I received
-with the package.
-
-The current version (modification date January 25, 1990) has only the
-bare-bones interface provided by the THINK C library routine "ccommand",
-which allows the user to type a command line and to redirect the output.
-Perhaps someday I may try to implement a "real" user interface; perhaps
-not.
-
-The only modifications made to the source file are surrounded by "#ifdef
-THINK_C"..."#endif"; in theory, then, these sources could be recompiled
-on another system if necessary.  These are the actual files modified:
-alloca.c, dfa.c, flexdef.h, main.c, misc.c, scan.c, sym.c.  Most of these
-changes were minor, and many of them would have been unnecessary if the
-original Flex source code had been written for an ANSI-compliant C compiler.
-In addition, the file "macutils.c" is completely new; see the discussion
-of "MakeRes" below.
-
-THINK C users may find it convenient to have the output text files written
-by Flex be THINK C documents.  To do this, create a copy of the "ANSI"
-project called "ANSI-KAHL", and a copy of the file "fopen.c" called
-"fopen-KAHL.c".  In the copy, find the routine "setfiletype", and replace
-the lines:
-	if (!(oflag & F_BINARY))
-		pb.ioFlFndrInfo.fdType = 'TEXT';
-with the lines:
-	if (!(oflag & F_BINARY)) {
-		pb.ioFlFndrInfo.fdType = 'TEXT';
-		pb.ioFlFndrInfo.fdCreator = 'KAHL';
-		}
-Replace "fopen.c" with the new "fopen-KAHL.c", rebuild the new project
-"ANSI-KAHL", and use this project in the project file "Flex.¹"
-instead of the "ANSI" project.
-
-** The "MakeRes" program
-
-The output files created by Flex contain large amounts of preinitialized
-static data; the file "scan.c" contained in the Flex.¹ project is one
-such file.  However, the Macintosh architecture limits normal applications
-to 32K of global data.  In many cases (including Flex), this limit can
-be surpassed by the static data generated by Flex.
-
-The solution I have implemented for the THINK C version of Flex is to
-extract the data tables from the Flex output file, and paste them into
-the file "MakeRes.c".  Then, by recompiling and running the program in
-the "MakeRes.¹" project (it is not necessary to create an application),
-a resource file called "Flex.¹.rsrc" is created in the current directory.
-The Flex output file "scan.c" has been modified to load the static data
-from the resource fork of the Flex application.  This is done by calling
-the "load_table" function, which is defined in the file "macutils.c".
-
-In the application for which I needed Flex, the data tables were small
-enough that I didn't need to do this.  However, if your application
-requires you to do this, simply follow the model of "scan.c"; the MakeRes
-project and source code has been included for your use.
-
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/alloca.c b/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/alloca.c
deleted file mode 100644
index 9cb6fa0..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/alloca.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
-	alloca -- (mostly) portable public-domain implementation -- D A Gwyn
-
-	last edit:	86/05/30	rms
-	   include config.h, since on VMS it renames some symbols.
-	   Use xmalloc instead of malloc.
-
-	This implementation of the PWB library alloca() function,
-	which is used to allocate space off the run-time stack so
-	that it is automatically reclaimed upon procedure exit, 
-	was inspired by discussions with J. Q. Johnson of Cornell.
-
-	It should work under any C implementation that uses an
-	actual procedure stack (as opposed to a linked list of
-	frames).  There are some preprocessor constants that can
-	be defined when compiling for your specific system, for
-	improved efficiency; however, the defaults should be okay.
-
-	The general concept of this implementation is to keep
-	track of all alloca()-allocated blocks, and reclaim any
-	that are found to be deeper in the stack than the current
-	invocation.  This heuristic does not reclaim storage as
-	soon as it becomes invalid, but it will do so eventually.
-
-	As a special case, alloca(0) reclaims storage without
-	allocating any.  It is a good idea to use alloca(0) in
-	your main control loop, etc. to force garbage collection.
-*/
-#ifndef lint
-static char	SCCSid[] = "@(#)alloca.c	1.1";	/* for the "what" utility */
-#endif
-
-#ifdef emacs
-#include "config.h"
-#ifdef static
-/* actually, only want this if static is defined as ""
-   -- this is for usg, in which emacs must undefine static
-   in order to make unexec workable
-   */
-#ifndef STACK_DIRECTION
-you
-lose
--- must know STACK_DIRECTION at compile-time
-#endif /* STACK_DIRECTION undefined */
-#endif /* static */
-#endif /* emacs */
-
-#ifndef alloca  /* If compiling with GCC, this file's not needed.  */
-
-#ifdef __STDC__
-typedef void	*pointer;		/* generic pointer type */
-#else
-typedef char	*pointer;		/* generic pointer type */
-#endif
-
-#define	NULL	0			/* null pointer constant */
-
-extern void	free();
-extern pointer	xmalloc();
-
-/*
-	Define STACK_DIRECTION if you know the direction of stack
-	growth for your system; otherwise it will be automatically
-	deduced at run-time.
-
-	STACK_DIRECTION > 0 => grows toward higher addresses
-	STACK_DIRECTION < 0 => grows toward lower addresses
-	STACK_DIRECTION = 0 => direction of growth unknown
-*/
-
-#ifndef STACK_DIRECTION
-#define	STACK_DIRECTION	0		/* direction unknown */
-#endif
-
-#if STACK_DIRECTION != 0
-
-#define	STACK_DIR	STACK_DIRECTION	/* known at compile-time */
-
-#else	/* STACK_DIRECTION == 0; need run-time code */
-
-static int	stack_dir;		/* 1 or -1 once known */
-#define	STACK_DIR	stack_dir
-
-static void
-find_stack_direction (/* void */)
-{
-  static char	*addr = NULL;	/* address of first
-				   `dummy', once known */
-  auto char	dummy;		/* to get stack address */
-
-  if (addr == NULL)
-    {				/* initial entry */
-      addr = &dummy;
-
-      find_stack_direction ();	/* recurse once */
-    }
-  else				/* second entry */
-    if (&dummy > addr)
-      stack_dir = 1;		/* stack grew upward */
-    else
-      stack_dir = -1;		/* stack grew downward */
-}
-
-#endif	/* STACK_DIRECTION == 0 */
-
-/*
-	An "alloca header" is used to:
-	(a) chain together all alloca()ed blocks;
-	(b) keep track of stack depth.
-
-	It is very important that sizeof(header) agree with malloc()
-	alignment chunk size.  The following default should work okay.
-*/
-
-#ifndef	ALIGN_SIZE
-#define	ALIGN_SIZE	sizeof(double)
-#endif
-
-typedef union hdr
-{
-  char	align[ALIGN_SIZE];	/* to force sizeof(header) */
-  struct
-    {
-      union hdr *next;		/* for chaining headers */
-      char *deep;		/* for stack depth measure */
-    } h;
-} header;
-
-/*
-	alloca( size ) returns a pointer to at least `size' bytes of
-	storage which will be automatically reclaimed upon exit from
-	the procedure that called alloca().  Originally, this space
-	was supposed to be taken from the current stack frame of the
-	caller, but that method cannot be made to work for some
-	implementations of C, for example under Gould's UTX/32.
-*/
-
-static header *last_alloca_header = NULL; /* -> last alloca header */
-
-pointer
-alloca (size)			/* returns pointer to storage */
-     unsigned	size;		/* # bytes to allocate */
-{
-  auto char	probe;		/* probes stack depth: */
-  register char	*depth = &probe;
-
-#if STACK_DIRECTION == 0
-  if (STACK_DIR == 0)		/* unknown growth direction */
-    find_stack_direction ();
-#endif
-
-				/* Reclaim garbage, defined as all alloca()ed storage that
-				   was allocated from deeper in the stack than currently. */
-
-  {
-    register header	*hp;	/* traverses linked list */
-
-    for (hp = last_alloca_header; hp != NULL;)
-      if ((STACK_DIR > 0 && hp->h.deep > depth)
-	  || (STACK_DIR < 0 && hp->h.deep < depth))
-	{
-	  register header	*np = hp->h.next;
-
-	  free ((pointer) hp);	/* collect garbage */
-
-	  hp = np;		/* -> next header */
-	}
-      else
-	break;			/* rest are not deeper */
-
-    last_alloca_header = hp;	/* -> last valid storage */
-  }
-
-  if (size == 0)
-    return NULL;		/* no allocation required */
-
-  /* Allocate combined header + user data storage. */
-
-  {
-    register pointer	new = xmalloc (sizeof (header) + size);
-
-    /* address of header */
-
-    ((header *)new)->h.next = last_alloca_header;
-    ((header *)new)->h.deep = depth;
-
-    last_alloca_header = (header *)new;
-
-    /* User storage begins just after header. */
-
-    return (pointer)((char *)new + sizeof(header));
-  }
-}
-
-#endif /* no alloca */
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/alloca.h b/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/alloca.h
deleted file mode 100644
index f48eaf2..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/alloca.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/****************
-** alloca.h
-**
-** header for alloca()
-*****************/
-
-typedef void *pointer;
-
-pointer alloca(unsigned size);
-
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/xmalloc.c b/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/xmalloc.c
deleted file mode 100644
index 5bef831..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/Macintosh/xmalloc.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* xmalloc.c -- malloc with out of memory checking
-   Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#if STDC_HEADERS || THINK_C
-#include <stdlib.h>
-#else
-char *malloc ();
-char *realloc ();
-void free ();
-#endif
-
-#ifdef THINK_C
-#define error(x, y, z) perror(z) /* Throw out meaningless arguments */
-#else
-void error ();
-#endif
-
-/* Allocate N bytes of memory dynamically, with error checking.  */
-
-char *
-xmalloc (n)
-     unsigned n;
-{
-  char *p;
-
-  p = malloc (n);
-  if (p == 0)
-    /* Must exit with 2 for `cmp'.  */
-    error (2, 0, "virtual memory exhausted");
-  return p;
-}
-
-/* Change the size of an allocated block of memory P to N bytes,
-   with error checking.
-   If P is NULL, run xmalloc.
-   If N is 0, run free and return NULL.  */
-
-char *
-xrealloc (p, n)
-     char *p;
-     unsigned n;
-{
-  if (p == 0)
-    return xmalloc (n);
-  if (n == 0)
-    {
-      free (p);
-      return 0;
-    }
-  p = realloc (p, n);
-  if (p == 0)
-    /* Must exit with 2 for `cmp'.  */
-    error (2, 0, "virtual memory exhausted");
-  return p;
-}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/NT/Makefile b/WebKitTools/android/flex-2.5.4a/MISC/NT/Makefile
deleted file mode 100644
index 581d497..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/NT/Makefile
+++ /dev/null
@@ -1,103 +0,0 @@
-#
-# make file for "flex" tool
-# @(#) $Header: /usr/fsys/odin/a/vern/flex/RCS/Makefile,v 2.9 
-# 90/05/26 17:28:44 vern Exp $ (LBL)
-#
-# the first time around use "nmake f_flex"
-#
-#  This makefile is specific for Microsoft's Visual C 2.0, & nmake
-#
-#         - Stan Adermann <stana@leonardo.lmt.com>
-#
-
-
-SKELFLAGS = -DDEFAULT_SKELETON_FILE=\"c:/src/flex/flex.skl\"
-CFLAGS = -nologo -W2 -F 8000 -Ox -DUSG
-LDFLAGS = /nologo /BATCH /STACK:8000
-FLEX_FLAGS = -ist8 -Sflex.skl
-
-FLEX = .\flex.exe
-CC = cl
-YACC = c:\lib\byacc
-MAKE = nmake /nologo
-
-FLEXOBJS = \
-        ccl.obj \
-        dfa.obj \
-        ecs.obj \
-        gen.obj \
-        main.obj \
-        misc.obj \
-        nfa.obj \
-        parse.obj \
-        scan.obj \
-        skel.obj \
-        sym.obj \
-        tblcmp.obj \
-        yylex.obj
-
-FLEX_C_SOURCES = \
-        ccl.c \
-        dfa.c \
-        ecs.c \
-        gen.c \
-        main.c \
-        misc.c \
-        nfa.c \
-        parse.c \
-        scan.c \
-        skel.c \
-        sym.c \
-        tblcmp.c \
-        yylex.c
-
-all : flex.exe 
-
-flex.exe : $(FLEXOBJS)
-        link $(LDFLAGS) $(FLEXOBJS) -out:$*.exe
-
-f_flex:
-        copy initscan.c scan.c
-        touch scan.c
-        @echo  compiling first flex  
-        $(MAKE) flex.exe 
-        del scan.c
-        @echo using first flex to generate final version...
-        $(MAKE) flex.exe
-
-#
-# general inference rule
-#
-.c.obj:
-        $(CC) -c $(CFLAGS) $*.c
-
-parse.h parse.c : parse.y
-        $(YACC) -d parse.y
-        @move y_tab.c parse.c
-        @move y_tab.h parse.h
-
-scan.c : scan.l
-        $(FLEX) $(FLEX_FLAGS) $(COMPRESSION) scan.l >scan.c
-
-
-scan.obj : scan.c parse.h flexdef.h
-
-main.obj : main.c flexdef.h
-        $(CC) $(CFLAGS) -c $(SKELFLAGS) main.c
-
-ccl.obj : ccl.c flexdef.h
-dfa.obj : dfa.c flexdef.h
-ecs.obj : ecs.c flexdef.h
-gen.obj : gen.c flexdef.h
-misc.obj : misc.c flexdef.h
-nfa.obj : nfa.c flexdef.h
-parse.obj : parse.c flexdef.h
-sym.obj : sym.c flexdef.h
-tblcmp.obj : tblcmp.c flexdef.h
-yylex.obj : yylex.c flexdef.h
-skel.obj : skel.c flexdef.h
-
-
-clean :
-        del *.obj
-        del *.map
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/NT/config.h b/WebKitTools/android/flex-2.5.4a/MISC/NT/config.h
deleted file mode 100644
index 17e831a..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/NT/config.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* config.h.  Generated automatically by configure.  */
-/* $Header: /home/daffy/u0/vern/flex/RCS/conf.in,v 1.2 95/01/09 
-12:11:51 vern Exp $ */
-
-/* Define to empty if the keyword does not work.  */
-/* #undef const */
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-/* #undef size_t */
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS 1
-
-/* Define if you have the <malloc.h> header file.  */
-#define HAVE_MALLOC_H 1
-
-/* Define if you have the <string.h> header file.  */
-#define HAVE_STRING_H 1
-
-/* Define if you have the <sys/types.h> header file.  */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define if you have <alloca.h> and it should be used (not on 
-Ultrix).  */
-#define HAVE_ALLOCA_H 0
-
-/* Define if platform-specific command line handling is necessary.  */
-/* #undef NEED_ARGV_FIXUP */
-
-/* Define if you use FAT file system, leave undefined for NTFS */
-#undef SHORT_FILE_NAMES 
-/* #define SHORT_FILE_NAMES 1 */
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/NeXT b/WebKitTools/android/flex-2.5.4a/MISC/NeXT
deleted file mode 100644
index f862a1f..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/NeXT
+++ /dev/null
@@ -1,34 +0,0 @@
-this API is not documented/supported by NeXT and may go away at any time,
-  so test again when you upgrade (works fine for me on NEXTSTEP_Dev_3.2)
--------------------------------------------------------------------------
-See KBNS.32.2.029 from the successor of:
-ftp://ftp.cs.orst.edu/software/NeXT/documents/KBNS.32.1.rtf
-Otherwise (that successor not yet having been published), ask me for a copy
-of the item on RfSchtkt@maze.ruca.ua.ac.be. Bison's messages are not as
-disciplined as flex' ones, so it should get more discipline first.
-
-Specifically (in addition to what's described in the KBNS item):
-makeUser.o and make_support.o should be added to OBJECTS in Makefile.in
-In parse.y, line_pinpoint() (assumption all messages ultimately go there), add:
-	  make_support(
-	    // don't worry about declaring: cc's source doesn't either,
-	    // it seems
-	    syntaxerror?0:1,
-	    NULL,
-	    infilename,
-	    line,
-	    str,
-	    0,0,0
-	    );
-
-FMyIO: in cc, these files contain the word make_support:
-  ChangeLog-NeXT
-  Makefile.in
-  config/next.h: defines REPORT_EVENT in terms of make_support
-  make_support.c
-
-FMyIO: in cc, these files contain the word REPORT_EVENT:
-  cccp.c
-  config/next.h
-  gcc.c
-  toplev.c
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/OS2/Makefile.os2 b/WebKitTools/android/flex-2.5.4a/MISC/OS2/Makefile.os2
deleted file mode 100644
index e984f6d..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/OS2/Makefile.os2
+++ /dev/null
@@ -1,72 +0,0 @@
-# make file for "flex" tool, emx+gcc

-

-release:

-	$(MAKE) -f Makefile.os2 flex.exe \

-	CC="gcc -Zomf -O" O=".obj" A=".lib" AR="emxomfar" \

-	LDFLAGS="-s -Zcrtdll -Zstack 512"

-debug:

-	$(MAKE) -f Makefile.os2 flex.exe \

-	CC="gcc -g" O=".o" A=".a" AR="ar"

-

-CFLAGS = -DOS2 -DSHORT_FILE_NAMES

-

-YACC = bison 

-FLEX = flex

-FLEX_FLAGS = -ist

-

-.SUFFIXES: .c $O

-

-.c$O:

-	$(CC) $(CFLAGS) -c $<

-

-FLEXLIB = fl$A

-FLEXOBJS = ccl$O dfa$O ecs$O gen$O main$O misc$O nfa$O parse$O \

-	scan$O skel$O sym$O tblcmp$O yylex$O

-LIBOBJS = libmain$O libyywrap$O

-

-flex.exe : $(FLEXOBJS) $(FLEXLIB)

-	$(CC) $(LDFLAGS) -o $@ $(FLEXOBJS) $(FLEXLIB)

-

-first_flex:

-	cp initscan.c scan.c

-	$(MAKE) $(MFLAGS) flex

-

-$(FLEXLIB): $(LIBOBJS)

-	$(AR) cru $(FLEXLIB) $(LIBOBJS)

-	$(AR) s $(FLEXLIB)

-

-parse.h parse.c: parse.y

-	$(YACC) -d -o parse.c parse.y

-

-scan.c : scan.l

-	$(FLEX) $(FLEX_FLAGS) $(COMPRESSION) scan.l >scan.c

-

-scan$O : scan.c parse.h flexdef.h

-

-main$O : main.c flexdef.h

-ccl$O : ccl.c flexdef.h

-dfa$O : dfa.c flexdef.h

-ecs$O : ecs.c flexdef.h

-gen$O : gen.c flexdef.h

-misc$O : misc.c flexdef.h

-nfa$O : nfa.c flexdef.h

-parse$O : parse.c flexdef.h

-sym$O : sym.c flexdef.h

-tblcmp$O : tblcmp.c flexdef.h

-yylex$O : yylex.c flexdef.h

-

-skel.c: flex.skl mkskel.sh

-	$(SHELL) mkskel.sh flex.skl >skel.c

-

-test : flex

-	flex $(FLEX_FLAGS) $(COMPRESSION) scan.l | diff scan.c -

-

-bigtest :

-	rm -f scan.c ; $(MAKE) COMPRESSION="-C" test

-	rm -f scan.c ; $(MAKE) COMPRESSION="-Ce" test

-	rm -f scan.c ; $(MAKE) COMPRESSION="-Cm" test

-	rm -f scan.c ; $(MAKE) COMPRESSION="-Cfe" test

-	rm -f scan.c ; $(MAKE) COMPRESSION="-CFe" test

-	rm -f scan.c ; $(MAKE) COMPRESSION="-Cf" test

-	rm -f scan.c ; $(MAKE) COMPRESSION="-CF" test

-	rm -f scan.c ; $(MAKE)

diff --git a/WebKitTools/android/flex-2.5.4a/MISC/OS2/config.h b/WebKitTools/android/flex-2.5.4a/MISC/OS2/config.h
deleted file mode 100644
index acf7b86..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/OS2/config.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* ------------------------------------------------ */
-/* version of config.h for OS/2                     */
-/* ------------------------------------------------ */
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-#undef size_t
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS 1
-
-/* Define if you have the <malloc.h> header file.  */
-#define HAVE_MALLOC_H 1
-
-/* Define if you have the <string.h> header file.  */
-#define HAVE_STRING_H 1
-
-/* Define if you have the <sys/types.h> header file.  */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-#define HAVE_ALLOCA_H
-
-/* Define if platform-specific command line handling is necessary.  */
-#define NEED_ARGV_FIXUP
-#define argv_fixup(ac,av) { _response(ac,av); _wildcard(ac,av);}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/README b/WebKitTools/android/flex-2.5.4a/MISC/README
deleted file mode 100644
index dc16b02..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/README
+++ /dev/null
@@ -1,76 +0,0 @@
-Miscellaneous flex stuff.  The items which have been tested with flex 2.5 are:
-
-	- texinfo/, a subdirectory containing a "texinfo" version of flex(1)
-	  and the corresponding "info" files (contributed by Francois Pinard).
-
-	- VMS/, a subdirectory containing makefiles, configuration files,
-	  run-time support, and installation notes for building flex 2.5
-	  on VMS (contributed by Pat Rankin).
-
-	- Borland/ - makefile and config.h for Borland 4.02 compiler
-	  (contributed by Terrence O Kane, who notes that no source
-	  code changes were necessary).
-
-	- NT/ - Makefile and config.h for NT, contributed by Stan Adermann.
-
-	- OS2/ - Makefile and config.h for building flex under OS/2,
-	  contributed by Kai Uwe Rommel.
-
-	- Amiga/: notes on building flex for the Amiga, contributed
-	  by Andreas Scherer.
-
-	- parse.c, parse.h - output of running yacc (byacc, actually)
-	  on parse.y.  If your system doesn't have a flavor of yacc available,
-	  copy these into the main flex source directory instead.
-
-	- flex.man - preformatted version of flex man page
-
-
-The following have been tested using flex 2.4:
-
-	- debflex.awk, an awk script for anotating flex debug output.
-	  It presently only works with gawk and mawk, not with "old"
-	  or "new" awk.
-
-	- NeXT: ProjectBuilder.app support for use in the NeXT world.
-
-	- Notes on building flex for the Macintosh using Think-C,
-	  in the Macintosh/ subdirectory.
-
-	- testxxLexer.l, a sample C++ program that uses flex's scanner
-	  class option ("-+").
-
-	- fastwc/, a subdirectory containing examples of how to use flex
-	  to write progressively higher-performance versions of the Unix
-	  "wc" utility.  This certainly should work with 2.5, but hasn't
-	  been tested.
-
-	- Borland.old/: notes on building flex 2.4 for Borland C++ 3.1
-	  on MS-DOS.  These shouldn't be needed for flex 2.5.  Included
-	  only in case you encounter unanticipated difficulties.
-
-	- EBCDIC: contact information for building flex for EBCDIC.
-
-
-The following are all out-of-date with respect to flex release 2.4 (and
-in general up-to-date for flex 2.3):
-
-	- Atari/Atari.patches, patches for porting flex to the Atari and
-	  to Minix.
-
-	- A number of notes and Makefiles for compiling flex under MS-DOS,
-	  in the MSDOS/ subdirectory.
-
-	- Notes on building flex for MVS, in the MVS/ subdirectory.
-
-If any of this is out-of-date and can be deleted, please let me know.
-
-And the following is included for compatibility with some broken versions
-of bison:
-
-	- alloca.c, a public-domain, mostly-portable version of the
-	  alloca() routine (used by bison's parsers) written by D. A. Gwyn.
-
-
-Many thanks to those who contributed these files.  Updated versions will
-be appreciated!
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/VMS/README.VMS b/WebKitTools/android/flex-2.5.4a/MISC/VMS/README.VMS
deleted file mode 100644
index e4a4966..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/VMS/README.VMS
+++ /dev/null
@@ -1,83 +0,0 @@
-Brief instructions for building flex 2.5.x for VMS:
-
-   0) if you have either MMS (from Digital) or MMK (freeware) for use
-as a `make' utility, follow the directions in steps #1 through #5 below.
-If not, execute
-      @BUILD.COM xxxC
-where "xxxC" is either "VAXC" or "DECC" or "GNUC", and then skip to
-step #5.
-
-   1) set default to the source directory (not the [.MISC.VMS] subdirectory
-where this file is located).
-
-   2) COPY [.MISC.VMS]DESCRIP.MMS []*.*
-(Recursive invocations of `make' for the `bigcheck' test assume that the
-makefile will be found as descrip.mms in the current directory.)
-
-To build with VAX C for VAX/VMS:
-   3) MMS /MACRO=("VAXC=1") FLEX.EXE
-(The /macro qualifier is optional in this case.)
-
-To build with GNU C for VAX/VMS:
- 2.5) possibly edit descrip.mms to uncomment `SET COMMAND' for GCCINIT,
-      depending on local site configuration
-   3) MMS /MACRO=("GNUC=1") FLEX.EXE
-
-To build with DEC C for either VAX/VMS or Alpha/VMS:
-   3) MMS /MACRO=("DECC=1") FLEX.EXE
-(Expect one or two informational messages from the compiler about
-implicitly declared functions.)
-
-Minimal testing of the resulting program:
-   4) MMS CHECK
-(If `diff' reports no warnings, the test has succeeded.)
-
-More thorough testing:
- 4.5) MMS /MACRO=("xxxC=1") BIGCHECK    ! "xxxC=1" as in step #3 above
-(If using an older version of MMK rather than MMS, this might fail when
-`make' is invoked recursively due to excessive BYTLM usage by MMK.)
-
-Installation (the VMS makefile does not support an `install' target;
-you'll need to do this part manually):
-   5) copy flex.exe, flex.doc, flex.skl, flexlib.olb, and FlexLexer.h to
-location(s) appropriate for your site.  To use flex, define a "foreign"
-command by making a DCL symbol whose value begins with a dollar sign
-immediately followed by the filename for flex.exe, as in
-      $ flex :== $local_tools:flex.exe
-where `local_tools:' is the logical name pointing to flex.exe's location.
-This symbol will ordinarily be a candidate for your login.com.  When
-invoking flex, upper- or mixed-case command line options must be enclosed
-in quotes.  For example,
-      $ flex "-Pxyz" "-L" -t mylexer.l > mylexer.c
-(use prefix "xyz" instead of "yy", suppress `#line' compiler directives
-in the output, write the output to `stdout', process file mylexer.l,
-and capture `stdout' in file mylexer.c).  As illustrated here, this VMS
-version of flex supports emulation of command line I/O redirection used
-by Unix shells.
-
- flex.exe    -- the executable image for the flex program;
- flex.doc    -- documentation, the "man page" describing flex (flex.1
-                processed with `nroff -man' followed by `col -b');
- flex.skl    -- a text file containing flex's default skeleton;
-                with this version of flex, it is for reference only;
-                flex.exe does not need to know where to find it;
- flexlib.olb -- an object library containing some support routines;
-                you might need to link your generated lexer against
-                it, depending on how your program is designed;
-                flex.exe does not access it; it corresponds to
-                `libfl.a' under Unix;
- FlexLexer.h -- header file used for C++ class-based lexers; not
-                needed for ordinary C lexers.
-
-Notes:
-      This VMS port of flex supports only the original Unix command line
-interface, not the native DCL interface which was available for flex 2.3.
-
- build.com   -- DCL command procedure as alternative to descrip.mms;
- descrip.mms -- 2.5.x makefile for use with MMS or MMK (see step #1);
- mkskel.tpu  -- TPU program used to make skel.c from flex.skl for full
-                build from scratch; performs same function as mkskel.sh;
- vms-conf.h  -- pre-configured `conf.in', copied to [-.-]config.h;
- vms-code.c  -- VMS-specific support code, copied to [-.-]vms-code.c;
- README.VMS  -- this file
-
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/VMS/build.com b/WebKitTools/android/flex-2.5.4a/MISC/VMS/build.com
deleted file mode 100644
index dbde55a..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/VMS/build.com
+++ /dev/null
@@ -1,155 +0,0 @@
-$! VMS build procedure for flex 2.5.x;
-$ v = 'f$verify(0)' 
-$!
-$! usage:
-$!  $ @[.MISC.VMS]BUILD.COM compiler parser [test]
-$!	where `compiler' is either "GNUC" or "DECC" or "VAXC" or empty
-$!	  and `parser' is either "BISON" or "BYACC" or "YACC" or empty
-$!	  and `[test]' is either "CHECK-ONLY" or "NO-CHECK" or empty
-$!	empty compiler defaults to VAX C (even under Alpha/VMS);
-$!	special "LINK" compiler value does link without compilation;
-$!	empty parser defaults to using supplied parse code in [.MISC];
-$!	optional test is performed by default.
-$!
-$
-$! we start from [.MISC.VMS], then move to the main source directory
-$ where = f$parse("_._;",f$environ("PROCEDURE")) - "_._;"
-$ set default 'where'
-$ brkt = f$extract(f$length(where)-1,1,where)
-$ if f$locate(".MISC.VMS"+brkt,where).lt.f$length(where) then -
-	set default 'f$string(f$extract(0,1,f$dir()) + "-.-" + brkt)'
-$
-$ p1 := 'p1'
-$ p2 := 'p2'
-$ p3 := 'p3'
-$ if p1.eqs."LINK" then goto link
-$ if p3.eqs."CHECK-ONLY" then goto check
-$ p2 = p2 - "_PARSER"
-$!
-$ CDEFS = "/Define=(""VMS"")"		! =(""VMS"",""DEFAULT_CSIZE=256"")
-$!
-$ if p1.eqs."GNUC"
-$ then	CC	= "gcc"
-$	CFLAGS	= "/noList/Opt=2/Debug/noVerbose"
-$	LIBS	= "gnu_cc:[000000]gcclib.olb/Library, sys$library:vaxcrtl.olb/Library"
-$ else	CC	= "cc"
-$  if p1.eqs."DECC"
-$  then CFLAGS	= "/noList/Prefix=All"
-$	LIBS	= ""
-$	if f$trnlnm("DECC$CC_DEFAULT").nes."" then CC = CC + "/DECC"
-$  else CFLAGS	= "/noList/Optimize=noInline"
-$	LIBS	= "sys$share:vaxcrtl.exe/Shareable"
-$	if f$trnlnm("DECC$CC_DEFAULT").nes."" then CC = CC + "/VAXC"
-$	if p1.nes."" .and. p1.nes."VAXC" then  exit %x002C
-$  endif
-$ endif
-$!
-$	no_parser = 0
-$ if p2.eqs."BISON"
-$ then	YACC	  = "bison"
-$	YACCFLAGS = "/Defines/Fixed_Outfiles"
-$	ALLOCA	  = ",[]alloca.obj"
-$ else
-$	YACCFLAGS = "-d"
-$	ALLOCA	  = ""
-$  if p2.eqs."BYACC" .or. p2.eqs."YACC"
-$  then	YACC	  = f$edit(p2,"LOWERCASE")
-$  else	YACC	  = "! yacc"
-$	if p2.nes."" .and. p2.nes."NO" .and. p2.nes."NONE" then	exit %x002C
-$	no_parser = 1
-$  endif
-$ endif
-$!
-$ ECHO	 = "write sys$output"
-$ COPY	 = "copy_"
-$ MOVE	 = "rename_/New_Vers"
-$ MUNG	 = "search_/Exact/Match=NOR"
-$ PURGE	 = "purge_/noConfirm/noLog"
-$ REMOVE = "delete_/noConfirm/noLog"
-$ TPU	 = "edit_/TPU/noJournal/noDisplay/noSection"
-$!
-$ if v then set verify
-$!
-$ 'COPY' [.misc.vms]vms-conf.h config.h
-$ 'COPY' [.misc.vms]vms-code.c vms-code.c
-$ 'COPY' [.misc]flex.man flex.doc
-$ if ALLOCA.nes."" then 'COPY' [.MISC]alloca.c alloca.c
-$ 'COPY' initscan.c scan.c	!make.bootstrap
-$!
-$ if f$search("skel.c").nes."" then -
-     if f$cvtime(f$file_attr("skel.c","RDT")).gts. -
-	f$cvtime(f$file_attr("flex.skl","RDT")) then goto skip_mkskel
-$ 'TPU' /Command=[.misc.vms]mkskel.tpu flex.skl /Output=skel.c
-$skip_mkskel:
-$!
-$ if f$search("parse.c").nes."" .and. f$search("parse.h").nes."" then -
-     if f$cvtime(f$file_attr("parse.c","RDT")).gts. -
-	f$cvtime(f$file_attr("parse.y","RDT")) then goto skip_yacc
-$ if f$search("y_tab.%").nes."" then 'REMOVE' y_tab.%;*
-$ if no_parser
-$ then	'COPY' [.misc]parse.% sys$disk:[]y_tab.*
-$ else	'YACC' 'YACCFLAGS' parse.y
-$ endif
-$ 'MUNG' y_tab.c "#module","#line" /Output=parse.c
-$ 'REMOVE' y_tab.c;*
-$ 'MOVE' y_tab.h parse.h
-$skip_yacc:
-$!
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] ccl.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] dfa.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] ecs.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] gen.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] main.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] misc.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] nfa.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] parse.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] scan.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] skel.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] sym.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] tblcmp.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] yylex.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] vms-code.c
-$ if ALLOCA.nes."" then -	!bison
-  'CC' 'CFLAGS' /Define=("STACK_DIRECTION=-1","xmalloc=yy_flex_xmalloc") alloca.c
-$!
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] libmain.c
-$ 'CC' 'CFLAGS' 'CDEFS' /Include=[] libyywrap.c
-$ library/Obj flexlib.olb/Create libmain.obj,libyywrap.obj/Insert
-$ if f$search("flexlib.olb;-1").nes."" then 'PURGE' flexlib.olb
-$!
-$ open/Write optfile sys$disk:[]crtl.opt
-$ write optfile LIBS
-$ close optfile
-$ if f$search("crtl.opt;-1").nes."" then 'PURGE' crtl.opt
-$!
-$ version = "# flex ""2.5"""	!default, overridden by version.h
-$ open/Read/Error=v_h_2 hfile version.h
-$ read/End=v_h_1 hfile version
-$v_h_1: close/noLog hfile
-$v_h_2: version = f$element(1,"""",version)
-$ open/Write optfile sys$disk:[]ident.opt
-$ write optfile "identification=""flex ''version'"""
-$ close optfile
-$ if f$search("ident.opt;-1").nes."" then 'PURGE' ident.opt
-$!
-$link:
-$ link/noMap/Exe=flex.exe ccl.obj,dfa.obj,ecs.obj,gen.obj,main.obj,misc.obj,-
-	nfa.obj,parse.obj,scan.obj,skel.obj,sym.obj,tblcmp.obj,yylex.obj,-
-	vms-code.obj 'ALLOCA' ,flexlib.olb/Lib,-
-	sys$disk:[]crtl.opt/Opt,sys$disk:[]ident.opt/Opt
-$!
-$ if p3.eqs."NO-CHECK" .or. p3.eqs."NOCHECK" then goto done
-$
-$check:
-$ 'ECHO' ""
-$ 'ECHO' "  Checking with COMPRESSION="""""
-$ mcr sys$disk:[]flex.exe -t -p  scan.l > scan.chk
-$ diff_/Output=_NL:/Maximum_Diff=1 scan.c scan.chk
-$ if $status
-$ then	'ECHO' "  Test passed."
-$	'REMOVE' scan.chk;*
-$ else	'ECHO' "? Test failed!"
-$ endif
-$
-$done:
-$ exit
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/VMS/descrip.mms b/WebKitTools/android/flex-2.5.4a/MISC/VMS/descrip.mms
deleted file mode 100644
index 5b2859d..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/VMS/descrip.mms
+++ /dev/null
@@ -1,311 +0,0 @@
-# descrip.mms -- makefile for building `flex' using MMS or MMK on VMS;
-#	created manually from Makefile.in
-#						flex 2.5.0	Jan'95
-
-MAKEFILE  = descrip.mms		    # from [.MISC.VMS]
-MAKE	  = $(MMS) /Descr=$(MAKEFILE)
-MAKEFLAGS = $(MMSQUALIFIERS)
-
-# Possible values for DEFS:
-# "VMS" -- used just to make sure parentheses aren't empty;
-# For flex to always generate 8-bit scanners, append
-# ,"DEFAULT_CSIZE=256" inside /Define=() of DEFS.
-
-DEFS	  = /Define=("VMS")
-LDFLAGS	  = /noMap
-
-# compiler handling
-.ifdef GNUC
-CC	  = gcc
-GCCINIT	  = 	! SET COMMAND GNU_CC:[000000]GCC
-CFLAGS	  = /noList/Opt=2/Debug/noVerbose
-LIBS	  = gnu_cc:[000000]gcclib.olb/Library, sys$library:vaxcrtl.olb/Library
-C_CHOICE  = "GNUC=1"
-.else		! not GNU C
-CC	  = cc
-GCCINIT	  =
-.ifdef DECC
-CFLAGS	  = /noList/Prefix=All
-LIBS	  =
-C_CHOICE  = "DECC=1"
-.else		! not DEC C; assume VAX C
-CFLAGS	  = /noList/Optimize=noInline
-LIBS	  = sys$share:vaxcrtl.exe/Shareable
-C_CHOICE  = "VAXC=1"
-.endif
-.endif
-
-# parser handling
-#	mms/macro=("xxxC=1","zzz_parser=1"), where "zzz_parser" is
-#	either "bison_parser" or "byacc_parser" or "yacc_parser",
-#	otherwise assumed to be "no_parser"; and where "xxxC=1" is
-#	either "VAXC=1", "GNUC=1", or "DECC=1" as above
-.ifdef bison_parser
-YACC	  = bison
-YACCFLAGS = /Defines/Fixed_Outfiles
-YACCINIT  = set command gnu_bison:[000000]bison
-ALLOCA	  = ,[]alloca.obj		# note leading comma
-.else
-YACCFLAGS = -d
-YACCINIT  =
-ALLOCA	  =
-.ifdef byacc_parser
-YACC	  = byacc
-.else
-.ifdef yacc_parser
-YACC	  = yacc
-.else
-#	none of bison, byacc, or yacc specified
-.ifdef no_parser
-.else
-no_parser=1
-.endif	#<none>
-.endif	#yacc
-.endif	#byacc
-.endif	#bison
-
-# VMS-specific hackery
-ECHO	  = write sys$output		# requires single quoted arg
-COPY	  = copy_			#
-MOVE	  = rename_/New_Vers		# within same device only
-MUNG	  = search_/Exact/Match=NOR	# to strip unwanted `#module' directive
-NOOP	  = continue			# non-empty command that does nothing
-PURGE	  = purge_/noConfirm/noLog	# relatively quiet file removal
-REMOVE	  = delete_/noConfirm/noLog	# ditto
-TOUCH	  = append_/New _NL:		# requires single file arg
-TPU	  = edit_/TPU/noJournal/noDisplay/noSection
-
-# You can define this to be "lex.exe" if you want to replace lex at your site.
-FLEX	=flex.exe
-#	note: there should be no whitespace between `=' and the name,
-#	or else $(FLEX_EXEC) below will not function properly.
-FLEXLIB	  = flexlib.olb
-
-# You normally do not need to modify anything below this point.
-# ------------------------------------------------------------
-
-VMSDIR	  = [.MISC.VMS]
-MISCDIR	  = [.MISC]
-CURDIR	  = sys$disk:[]
-
-CPPFLAGS  = $(DEFS)/Include=[]
-LIBOPT	  = $(CURDIR)crtl.opt		# run-time library(s)
-ID_OPT	  = $(CURDIR)ident.opt		# version identification
-
-.SUFFIXES :	# avoid overhead of umpteen built-in rules
-.SUFFIXES : .obj .c
-
-.c.obj :
-	$(CC)$(CFLAGS)$(CPPFLAGS) $<
-
-VMSHDRS = $(VMSDIR)vms-conf.h	    # copied to []config.h
-VMSSRCS = $(VMSDIR)vms-code.c	    # copied to []vms-code.c
-VMSOBJS = ,vms-code.obj		    # note leading comma
-
-HEADERS = flexdef.h version.h
-
-SOURCES = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.y \
-	scan.l skel.c sym.c tblcmp.c yylex.c
-OBJECTS = ccl.obj,dfa.obj,ecs.obj,gen.obj,main.obj,misc.obj,nfa.obj,parse.obj,\
-	scan.obj,skel.obj,sym.obj,tblcmp.obj,yylex.obj $(VMSOBJS) $(ALLOCA)
-
-LIBSRCS = libmain.c libyywrap.c
-LIBOBJS = libmain.obj,libyywrap.obj
-
-LINTSRCS = ccl.c dfa.c ecs.c gen.c main.c misc.c nfa.c parse.c \
-	scan.c skel.c sym.c tblcmp.c yylex.c
-
-DISTFILES = README NEWS COPYING INSTALL FlexLexer.h \
-	configure.in conf.in Makefile.in mkskel.sh flex.skl \
-	$(HEADERS) $(SOURCES) $(LIBSRCS) MISC \
-	flex.1 scan.c install.sh mkinstalldirs configure
-
-DIST_NAME = flex
-
-# flex options to use when generating scan.c from scan.l
-COMPRESSION =
-PERF_REPORT = -p
-# which "flex" to use to generate scan.c from scan.l
-FLEX_EXEC   = mcr $(CURDIR)$(FLEX)
-FLEX_FLAGS  = -t $(PERF_REPORT) #$(COMPRESSION)
-
-MARKER	= make.bootstrap
-
-##### targets start here #####
-
-all : $(FLEX) flex.doc
-	@ $(NOOP)
-
-install : $(FLEX) flex.doc flex.skl $(FLEXLIB) FlexLexer.h
-	@ $(ECHO) "-- Installation must be done manually."
-	@ $(ECHO) "   $+"
-
-.ifdef GCCINIT
-.FIRST
-	$(GCCINIT)
-
-.endif	#GCCINIT
-
-flex : $(FLEX)
-	@ $(NOOP)
-
-$(FLEX) : $(MARKER) $(OBJECTS) $(FLEXLIB) $(LIBOPT) $(ID_OPT)
-	$(LINK)/Exe=$(FLEX) $(LDFLAGS)\
- $(OBJECTS),$(FLEXLIB)/Lib,$(LIBOPT)/Opt,$(ID_OPT)/Opt
-
-$(MARKER) : initscan.c
-	@- if f$search("scan.c").nes."" then $(REMOVE) scan.c;*
-	$(COPY) initscan.c scan.c
-	@ $(TOUCH) $(MARKER)
-
-parse.c : parse.y
-	@- if f$search("y_tab.%").nes."" then $(REMOVE) y_tab.%;*
-.ifdef no_parser
-	$(COPY) $(MISCDIR)parse.% $(CURDIR)y_tab.*
-.else
-	$(YACCINIT)
-	$(YACC) $(YACCFLAGS) parse.y
-.endif
-	$(MUNG) y_tab.c "#module","#line" /Output=parse.c
-	@- $(REMOVE) y_tab.c;*
-	$(MOVE) y_tab.h parse.h
-
-parse.h : parse.c
-	@ $(TOUCH) parse.h
-
-scan.c : scan.l
-	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) scan.l > scan.c
-
-scan.obj : scan.c parse.h flexdef.h config.h
-yylex.obj : yylex.c parse.h flexdef.h config.h
-
-skel.c : flex.skl $(VMSDIR)mkskel.tpu
-	$(TPU) /Command=$(VMSDIR)mkskel.tpu flex.skl /Output=skel.c
-
-main.obj : main.c flexdef.h config.h version.h
-ccl.obj : ccl.c flexdef.h config.h
-dfa.obj : dfa.c flexdef.h config.h
-ecs.obj : ecs.c flexdef.h config.h
-gen.obj : gen.c flexdef.h config.h
-misc.obj : misc.c flexdef.h config.h
-nfa.obj : nfa.c flexdef.h config.h
-parse.obj : parse.c flexdef.h config.h
-skel.obj : skel.c flexdef.h config.h
-sym.obj : sym.c flexdef.h config.h
-tblcmp.obj : tblcmp.c flexdef.h config.h
-vms-code.obj : vms-code.c flexdef.h config.h
-
-[]alloca.obj : alloca.c
-	$(CC)$(CFLAGS)/Define=("STACK_DIRECTION=-1","xmalloc=yy_flex_xmalloc") alloca.c
-
-alloca.c : $(MISCDIR)alloca.c
-	$(COPY) $(MISCDIR)alloca.c alloca.c
-
-config.h : $(VMSDIR)vms-conf.h
-	$(COPY) $(VMSDIR)vms-conf.h config.h
-
-vms-code.c : $(VMSDIR)vms-code.c
-	$(COPY) $(VMSDIR)vms-code.c vms-code.c
-
-test : check
-	@ $(NOOP)
-check : $(FLEX)
-	@ $(ECHO) ""
-	@ $(ECHO) "  Checking with COMPRESSION="$(COMPRESSION)""
-	$(FLEX_EXEC) $(FLEX_FLAGS) $(COMPRESSION) scan.l > scan.chk
-	diff_/Output=_NL:/Maximum_Diff=1 scan.c scan.chk
-
-bigcheck :
-	@- if f$search("scan.c").nes."" then $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-C""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-Ce""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-Cm""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-f""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-Cfea""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-CFer""") check
-	@- $(REMOVE) scan.c;*
-	$(MAKE)$(MAKEFLAGS) /Macro=($(C_CHOICE),"COMPRESSION=""-l""","PERF_REPORT=") check
-	@- $(REMOVE) scan.c;*,scan.chk;*
-	$(MAKE)$(MAKEFLAGS) $(FLEX)
-	@- $(PURGE) scan.obj
-	@ $(ECHO) "All checks successful"
-
-$(FLEXLIB) : $(LIBOBJS)
-	library/Obj $(FLEXLIB)/Create $(LIBOBJS)/Insert
-	@ if f$search("$(FLEXLIB);-1").nes."" then $(PURGE) $(FLEXLIB)
-
-# We call it .doc instead of .man, to lessen culture shock.  :-}
-#	If MISC/flex.man is out of date relative to flex.1, there's
-#	not much we can do about it with the tools readily available.
-flex.doc : flex.1
-	@ if f$search("$(MISCDIR)flex.man").eqs."" then \
-		$(COPY) flex.1 $(MISCDIR)flex.man
-	$(COPY) $(MISCDIR)flex.man flex.doc
-
-#
-#	This is completely VMS-specific...
-#
-
-# Linker options file specifying run-time library(s) to link against;
-# choice depends on which C compiler is used, and might be empty.
-$(LIBOPT) : $(MAKEFILE)
-	@ open/Write optfile $(LIBOPT)
-	@ write optfile "$(LIBS)"
-	@ close optfile
-
-# Linker options file putting the version number where the ANALYZE/IMAGE
-# command will be able to find and report it; assumes that the first line
-# of version.h has the version number enclosed within the first and second
-# double quotes on it [as in ``#define FLEX_VERSION "2.5.0"''].
-$(ID_OPT) : version.h
-	@ version = "# flex ""2.5"""	!default, overridden by version.h
-	@- open/Read hfile version.h
-	@- read hfile version
-	@- close/noLog hfile
-	@ version = f$element(1,"""",version)
-	@ open/Write optfile $(ID_OPT)
-	@ write optfile "identification=""flex ''version'"""
-	@ close optfile
-
-
-#
-#	This is the only stuff moderately useful from the remainder
-#	of Makefile.in...
-#
-
-mostlyclean :
-	@- if f$search("scan.chk").nes."" then $(REMOVE) scan.chk;*
-	@- if f$search("*.obj;-1").nes."" then $(PURGE) *.obj
-	@- if f$search("*.exe;-1").nes."" then $(PURGE) *.exe
-	@- if f$search("*.opt;-1").nes."" then $(PURGE) *.opt
-
-clean : mostlyclean
-	@- if f$search("*.obj").nes."" then $(REMOVE) *.obj;*
-	@- if f$search("parse.h").nes."" then $(REMOVE) parse.h;*
-	@- if f$search("parse.c").nes."" then $(REMOVE) parse.c;*
-	@- if f$search("alloca.c").nes."" .and.-
-	 f$search("$(MISCDIR)alloca.c").nes."" then $(REMOVE) alloca.c;*
-	@- if f$search("$(LIBOPT)").nes."" then $(REMOVE) $(LIBOPT);*
-	@- if f$search("$(ID_OPT)").nes."" then $(REMOVE) $(ID_OPT);*
-
-distclean : clean
-	@- if f$search("$(MARKER)").nes."" then $(REMOVE) $(MARKER);*
-	@- if f$search("$(FLEX)").nes."" then $(REMOVE) $(FLEX);*
-	@- if f$search("$(FLEXLIB)").nes."" then $(REMOVE) $(FLEXLIB);*
-	@- if f$search("flex.doc").nes."" then $(REMOVE) flex.doc;*
-	@- if f$search("scan.c").nes."" then $(REMOVE) scan.c;*
-	@- if f$search("vms-code.c").nes."" .and.-
-	 f$search("$(VMSDIR)vms-code.c").nes."" then $(REMOVE) vms-code.c;*
-	@- if f$search("config.h").nes."" .and.-
-	 f$search("$(VMSDIR)vms-conf.h").nes."" then $(REMOVE) config.h;*
-#	@- if f$search("descrip.mms").nes."" .and.-
-#	 f$search("$(VMSDIR)descrip.mms").nes."" then $(REMOVE) descrip.mms;*
-
-realclean : distclean
-	@- if f$search("skel.c").nes."" then $(REMOVE) skel.c;*
-
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/VMS/mkskel.tpu b/WebKitTools/android/flex-2.5.4a/MISC/VMS/mkskel.tpu
deleted file mode 100644
index e20a0eb..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/VMS/mkskel.tpu
+++ /dev/null
@@ -1,45 +0,0 @@
-!  mkskel.tpu
-!       usage:
-!  edit/TPU/noDisplay/noSection/Command=mkskel.tpu flex.skl /Output=skel.c
-!
-!  Create a C source file from the flex skeleton data.  Copy the file,
-!       changing backslash (\) to doubled backslash (\\) and quote (")
-!       to backslash quote (\").  For each line, insert space+space+quote
-!       at the beginning and quote+comma at the end.  Bracket the updated
-!       text with several lines of prologue and epilogue.
-!
-   skelfile := CREATE_BUFFER("file", GET_INFO(COMMAND_LINE, "file_name"));
-   SET(NO_WRITE, skelfile);
-   target := '"' | '\';                         !do this once, outside loops
-   POSITION(BEGINNING_OF(skelfile));            !start here
-   rest_of_line := CREATE_RANGE(MARK(NONE), MARK(NONE));  !also outside loops
-   LOOP
-      EXITIF MARK(NONE) = END_OF(skelfile);     !are we done yet?
-      COPY_TEXT('  "');  start_pos := MARK(NONE);
-      POSITION(LINE_END);  end_pos := MARK(NONE);
-      MODIFY_RANGE(rest_of_line, start_pos, end_pos);
-      LOOP
-	 next_match := SEARCH_QUIETLY(target, FORWARD, EXACT, rest_of_line);
-	 EXITIF next_match = 0;
-	 POSITION(BEGINNING_OF(next_match));
-	 COPY_TEXT('\');  MOVE_HORIZONTAL(1);   !past the matched character
-	 MODIFY_RANGE(rest_of_line, MARK(NONE), end_pos);
-      ENDLOOP;
-      POSITION(LINE_END);  COPY_TEXT('",');
-      MOVE_VERTICAL(1);  POSITION(LINE_BEGIN);  !go to next line
-   ENDLOOP;
-
-   POSITION(BEGINNING_OF(skelfile));            !insert five line prologue
-   COPY_TEXT('/* File created from flex.skl via mkskel.tpu */');   SPLIT_LINE;
-								   SPLIT_LINE;
-   COPY_TEXT('#include "flexdef.h"');                              SPLIT_LINE;
-								   SPLIT_LINE;
-   COPY_TEXT('const char *skel[] = {');                            SPLIT_LINE;
-
-   POSITION(END_OF(skelfile));                  !append two line epilogue
-   COPY_TEXT('  0');                                               SPLIT_LINE;
-   COPY_TEXT('};');                                             !! SPLIT_LINE;
-
-   WRITE_FILE(skelfile, GET_INFO(COMMAND_LINE, "output_file"));
-   QUIT
-!--<eof>--
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/VMS/vms-code.c b/WebKitTools/android/flex-2.5.4a/MISC/VMS/vms-code.c
deleted file mode 100644
index 825a6b3..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/VMS/vms-code.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* vms-code.c -- additional VMS-specific support code for flex
- */
-
-#include "flexdef.h"
-
-static const char *original_arg0;
-static const char default_arg0[] = "flex.exe";
-
-#define IN_FD	0
-#define OUT_FD	1
-#define ERR_FD	2
-
-static char *fix_arg0 PROTO((const char *));
-
-/* Command line arguments fixup -- simplify argv[0], and handle `>'
-   output redirection request; called first thing from main().  */
-
-void argv_fixup( iargc, iargv )
-int *iargc;
-char ***iargv;
-{
-    const char *mode[3], *rfm[3], *name[3];
-    char *p;
-    int i, oargc, punct, which, append, alt_rfm;
-
-    /*
-     * Get original argv[0] supplied by run-time library startup code,
-     * then replace it with a stripped down one.
-     */
-    original_arg0 = (*iargv)[0];
-    (*iargv)[0] = fix_arg0(original_arg0);
-
-    /*
-     *	Check command line arguments for redirection request(s).
-     *	For simplicity, if multiple attempts are made, the last one wins.
-     */
-    name[0] = name[1] = name[2] = 0;
-    oargc = 1;	/* number of args caller will see; count includes argv[0] */
-    for (i = 1; i < *iargc; i++) {
-	p = (*iargv)[i];
-	switch (*p) {
-	    case '<':
-		/* might be "<dir>file"; then again, perhaps "<<dir>file" */
-		punct = (strchr(p, '>') != 0);
-		if (p[1] == '<') {
-		    if (!punct || p[2] == '<')
-			flexerror("<<'sentinel' input not supported.");
-		    punct = 0;
-		}
-		if (punct)	/* the '<' seems to be directory punctuation */
-		    goto arg;	/*GOTO*/
-		mode[IN_FD] = "r";
-		rfm[IN_FD]  = 0;
-		name[IN_FD] = ++p;
-		if (!*p && (i + 1) < *iargc)
-		    name[IN_FD] = (*iargv)[++i];
-		break;
-	    case '>':
-		append = (p[1] == '>');
-		if (append) ++p;
-		alt_rfm = (p[1] == '$');
-		if (alt_rfm) ++p;
-		which = (p[1] == '&' ? ERR_FD : OUT_FD);
-		if (which == ERR_FD) ++p;
-		mode[which] = append ? "a" : "w";
-		rfm[which]  = alt_rfm ? "rfm=var" : "rfm=stmlf";
-		name[which] = ++p;
-		if (!*p && (i + 1) < *iargc)
-		    name[which] = (*iargv)[++i];
-		break;
-	    case '|':
-		flexerror("pipe output not supported.");
-		/*NOTREACHED*/
-		break;
-	    default:
- arg:		/* ordinary option or argument */
-		(*iargv)[oargc++] = p;
-		break;
-	}
-    }
-    /* perform any requested redirection; don't bother with SYS$xxx logicals */
-    if (name[IN_FD])
-	if (!freopen(name[IN_FD], mode[IN_FD], stdin))
-	    lerrsf("failed to redirect `stdin' from \"%s\"", name[IN_FD]);
-    if (name[OUT_FD])
-	if (!freopen(name[OUT_FD], mode[OUT_FD], stdout,
-		     rfm[OUT_FD], "rat=cr", "mbc=32", "shr=nil"))
-	    lerrsf("failed to redirect `stdout' to \"%s\"", name[OUT_FD]);
-    if (name[ERR_FD])  /* likely won't see message if this fails; oh well... */
-	if (!freopen(name[ERR_FD], mode[ERR_FD], stderr,
-		     rfm[ERR_FD], "rat=cr"))
-	    lerrsf("failed to redirect `stderr' to \"%s\"", name[ERR_FD]);
-    /* remove any excess arguments (used up from redirection) */
-    while (*iargc > oargc)
-	(*iargv)[--*iargc] = 0;
-    /* all done */
-    return;
-}
-
-/* Pick out the basename of a full filename, and return a pointer
-   to a modifiable copy of it.  */
-
-static char *fix_arg0( arg0 )
-const char *arg0;
-{
-    char *p, *new_arg0;
-
-    if (arg0) {
-	/* strip off the path */
-	if ((p = strrchr(arg0, ':')) != 0)	/* device punctuation */
-	    arg0 = p + 1;
-	if ((p = strrchr(arg0, ']')) != 0)	/* directory punctuation */
-	    arg0 = p + 1;
-	if ((p = strrchr(arg0, '>')) != 0)	/* alternate dir punct */
-	    arg0 = p + 1;
-    }
-    if (!arg0 || !*arg0)
-	arg0 = default_arg0;
-    /* should now have "something.exe;#"; make a modifiable copy */
-    new_arg0 = copy_string(arg0);
-
-    /* strip off ".exe" and/or ";#" (version number),
-       unless it ended up as the whole name */
-    if ((p = strchr(new_arg0, '.')) != 0 && (p > new_arg0)
-	&& (p[1] == 'e' || p[1] == 'E')
-	&& (p[2] == 'x' || p[2] == 'X')
-	&& (p[3] == 'e' || p[3] == 'E')
-	&& (p[4] == ';' || p[4] == '.' || p[4] == '\0'))
-	*p = '\0';
-    else if ((p = strchr(new_arg0, ';')) != 0 && (p > new_arg0))
-	*p = '\0';
-
-    return new_arg0;
-}
-
-
-#include <ssdef.h>
-#include <stsdef.h>
-
-#ifdef exit
-#undef exit
-extern void exit PROTO((int));	/* <stdlib.h> ended up prototyping vms_exit */
-#endif
-
-/* Convert zero to VMS success and non-zero to VMS failure.  The latter
-   does not bother trying to distinguish between various failure reasons.  */
-
-void vms_exit( status )
-int status;
-{
-    exit( status == 0 ? SS$_NORMAL : (SS$_ABORT | STS$M_INHIB_MSG) );
-}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/VMS/vms-conf.h b/WebKitTools/android/flex-2.5.4a/MISC/VMS/vms-conf.h
deleted file mode 100644
index 65aa477..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/VMS/vms-conf.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* config.h manually constructed for VMS */
-
-/* Define to empty if the keyword does not work.  */
-#undef const
-
-/* Define to `unsigned' if <sys/types.h> doesn't define.  */
-#undef size_t
-
-/* Define if you have the ANSI C header files.  */
-#define STDC_HEADERS
-
-/* Define if you have the <malloc.h> header file.  */
-#undef HAVE_MALLOC_H
-
-/* Define if you have the <string.h> header file.  */
-#define HAVE_STRING_H
-
-/* Define if you have the <sys/types.h> header file.  */
-#ifndef __GNUC__
-#undef HAVE_SYS_TYPES_H
-#else
-#define HAVE_SYS_TYPES_H
-#endif
-
-/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
-#undef HAVE_ALLOCA_H
-
-/* Extra platform-specific command line handling.  */
-#define NEED_ARGV_FIXUP
-
-/* Override default exit behavior.  */
-#define exit vms_exit
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/alloca.c b/WebKitTools/android/flex-2.5.4a/MISC/alloca.c
deleted file mode 100644
index bd4932a..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/alloca.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/* alloca.c -- allocate automatically reclaimed memory
-   (Mostly) portable public-domain implementation -- D A Gwyn
-
-   This implementation of the PWB library alloca function,
-   which is used to allocate space off the run-time stack so
-   that it is automatically reclaimed upon procedure exit,
-   was inspired by discussions with J. Q. Johnson of Cornell.
-   J.Otto Tennant <jot@cray.com> contributed the Cray support.
-
-   There are some preprocessor constants that can
-   be defined when compiling for your specific system, for
-   improved efficiency; however, the defaults should be okay.
-
-   The general concept of this implementation is to keep
-   track of all alloca-allocated blocks, and reclaim any
-   that are found to be deeper in the stack than the current
-   invocation.  This heuristic does not reclaim storage as
-   soon as it becomes invalid, but it will do so eventually.
-
-   As a special case, alloca(0) reclaims storage without
-   allocating any.  It is a good idea to use alloca(0) in
-   your main control loop, etc. to force garbage collection.  */
-
-#ifdef HAVE_CONFIG_H
-#if defined (emacs) || defined (CONFIG_BROKETS)
-#include <config.h>
-#else
-#include "config.h"
-#endif
-#endif
-
-/* If compiling with GCC 2, this file's not needed.  */
-#if !defined (__GNUC__) || __GNUC__ < 2
-
-/* If someone has defined alloca as a macro,
-   there must be some other way alloca is supposed to work.  */
-#ifndef alloca
-
-#ifdef emacs
-#ifdef static
-/* actually, only want this if static is defined as ""
-   -- this is for usg, in which emacs must undefine static
-   in order to make unexec workable
-   */
-#ifndef STACK_DIRECTION
-you
-lose
--- must know STACK_DIRECTION at compile-time
-#endif /* STACK_DIRECTION undefined */
-#endif /* static */
-#endif /* emacs */
-
-/* If your stack is a linked list of frames, you have to
-   provide an "address metric" ADDRESS_FUNCTION macro.  */
-
-#if defined (CRAY) && defined (CRAY_STACKSEG_END)
-long i00afunc ();
-#define ADDRESS_FUNCTION(arg) (char *) i00afunc (&(arg))
-#else
-#define ADDRESS_FUNCTION(arg) &(arg)
-#endif
-
-#if __STDC__
-typedef void *pointer;
-#else
-typedef char *pointer;
-#endif
-
-#define	NULL	0
-
-/* Different portions of Emacs need to call different versions of
-   malloc.  The Emacs executable needs alloca to call xmalloc, because
-   ordinary malloc isn't protected from input signals.  On the other
-   hand, the utilities in lib-src need alloca to call malloc; some of
-   them are very simple, and don't have an xmalloc routine.
-
-   Non-Emacs programs expect this to call use xmalloc.
-
-   Callers below should use malloc.  */
-
-#ifndef emacs
-#define malloc xmalloc
-#endif
-extern pointer malloc ();
-
-/* Define STACK_DIRECTION if you know the direction of stack
-   growth for your system; otherwise it will be automatically
-   deduced at run-time.
-
-   STACK_DIRECTION > 0 => grows toward higher addresses
-   STACK_DIRECTION < 0 => grows toward lower addresses
-   STACK_DIRECTION = 0 => direction of growth unknown  */
-
-#ifndef STACK_DIRECTION
-#define	STACK_DIRECTION	0	/* Direction unknown.  */
-#endif
-
-#if STACK_DIRECTION != 0
-
-#define	STACK_DIR	STACK_DIRECTION	/* Known at compile-time.  */
-
-#else /* STACK_DIRECTION == 0; need run-time code.  */
-
-static int stack_dir;		/* 1 or -1 once known.  */
-#define	STACK_DIR	stack_dir
-
-static void
-find_stack_direction ()
-{
-  static char *addr = NULL;	/* Address of first `dummy', once known.  */
-  auto char dummy;		/* To get stack address.  */
-
-  if (addr == NULL)
-    {				/* Initial entry.  */
-      addr = ADDRESS_FUNCTION (dummy);
-
-      find_stack_direction ();	/* Recurse once.  */
-    }
-  else
-    {
-      /* Second entry.  */
-      if (ADDRESS_FUNCTION (dummy) > addr)
-	stack_dir = 1;		/* Stack grew upward.  */
-      else
-	stack_dir = -1;		/* Stack grew downward.  */
-    }
-}
-
-#endif /* STACK_DIRECTION == 0 */
-
-/* An "alloca header" is used to:
-   (a) chain together all alloca'ed blocks;
-   (b) keep track of stack depth.
-
-   It is very important that sizeof(header) agree with malloc
-   alignment chunk size.  The following default should work okay.  */
-
-#ifndef	ALIGN_SIZE
-#define	ALIGN_SIZE	sizeof(double)
-#endif
-
-typedef union hdr
-{
-  char align[ALIGN_SIZE];	/* To force sizeof(header).  */
-  struct
-    {
-      union hdr *next;		/* For chaining headers.  */
-      char *deep;		/* For stack depth measure.  */
-    } h;
-} header;
-
-static header *last_alloca_header = NULL;	/* -> last alloca header.  */
-
-/* Return a pointer to at least SIZE bytes of storage,
-   which will be automatically reclaimed upon exit from
-   the procedure that called alloca.  Originally, this space
-   was supposed to be taken from the current stack frame of the
-   caller, but that method cannot be made to work for some
-   implementations of C, for example under Gould's UTX/32.  */
-
-pointer
-alloca (size)
-     unsigned size;
-{
-  auto char probe;		/* Probes stack depth: */
-  register char *depth = ADDRESS_FUNCTION (probe);
-
-#if STACK_DIRECTION == 0
-  if (STACK_DIR == 0)		/* Unknown growth direction.  */
-    find_stack_direction ();
-#endif
-
-  /* Reclaim garbage, defined as all alloca'd storage that
-     was allocated from deeper in the stack than currently. */
-
-  {
-    register header *hp;	/* Traverses linked list.  */
-
-    for (hp = last_alloca_header; hp != NULL;)
-      if ((STACK_DIR > 0 && hp->h.deep > depth)
-	  || (STACK_DIR < 0 && hp->h.deep < depth))
-	{
-	  register header *np = hp->h.next;
-
-	  free ((pointer) hp);	/* Collect garbage.  */
-
-	  hp = np;		/* -> next header.  */
-	}
-      else
-	break;			/* Rest are not deeper.  */
-
-    last_alloca_header = hp;	/* -> last valid storage.  */
-  }
-
-  if (size == 0)
-    return NULL;		/* No allocation required.  */
-
-  /* Allocate combined header + user data storage.  */
-
-  {
-    register pointer new = malloc (sizeof (header) + size);
-    /* Address of header.  */
-
-    ((header *) new)->h.next = last_alloca_header;
-    ((header *) new)->h.deep = depth;
-
-    last_alloca_header = (header *) new;
-
-    /* User storage begins just after header.  */
-
-    return (pointer) ((char *) new + sizeof (header));
-  }
-}
-
-#if defined (CRAY) && defined (CRAY_STACKSEG_END)
-
-#ifdef DEBUG_I00AFUNC
-#include <stdio.h>
-#endif
-
-#ifndef CRAY_STACK
-#define CRAY_STACK
-#ifndef CRAY2
-/* Stack structures for CRAY-1, CRAY X-MP, and CRAY Y-MP */
-struct stack_control_header
-  {
-    long shgrow:32;		/* Number of times stack has grown.  */
-    long shaseg:32;		/* Size of increments to stack.  */
-    long shhwm:32;		/* High water mark of stack.  */
-    long shsize:32;		/* Current size of stack (all segments).  */
-  };
-
-/* The stack segment linkage control information occurs at
-   the high-address end of a stack segment.  (The stack
-   grows from low addresses to high addresses.)  The initial
-   part of the stack segment linkage control information is
-   0200 (octal) words.  This provides for register storage
-   for the routine which overflows the stack.  */
-
-struct stack_segment_linkage
-  {
-    long ss[0200];		/* 0200 overflow words.  */
-    long sssize:32;		/* Number of words in this segment.  */
-    long ssbase:32;		/* Offset to stack base.  */
-    long:32;
-    long sspseg:32;		/* Offset to linkage control of previous
-				   segment of stack.  */
-    long:32;
-    long sstcpt:32;		/* Pointer to task common address block.  */
-    long sscsnm;		/* Private control structure number for
-				   microtasking.  */
-    long ssusr1;		/* Reserved for user.  */
-    long ssusr2;		/* Reserved for user.  */
-    long sstpid;		/* Process ID for pid based multi-tasking.  */
-    long ssgvup;		/* Pointer to multitasking thread giveup.  */
-    long sscray[7];		/* Reserved for Cray Research.  */
-    long ssa0;
-    long ssa1;
-    long ssa2;
-    long ssa3;
-    long ssa4;
-    long ssa5;
-    long ssa6;
-    long ssa7;
-    long sss0;
-    long sss1;
-    long sss2;
-    long sss3;
-    long sss4;
-    long sss5;
-    long sss6;
-    long sss7;
-  };
-
-#else /* CRAY2 */
-/* The following structure defines the vector of words
-   returned by the STKSTAT library routine.  */
-struct stk_stat
-  {
-    long now;			/* Current total stack size.  */
-    long maxc;			/* Amount of contiguous space which would
-				   be required to satisfy the maximum
-				   stack demand to date.  */
-    long high_water;		/* Stack high-water mark.  */
-    long overflows;		/* Number of stack overflow ($STKOFEN) calls.  */
-    long hits;			/* Number of internal buffer hits.  */
-    long extends;		/* Number of block extensions.  */
-    long stko_mallocs;		/* Block allocations by $STKOFEN.  */
-    long underflows;		/* Number of stack underflow calls ($STKRETN).  */
-    long stko_free;		/* Number of deallocations by $STKRETN.  */
-    long stkm_free;		/* Number of deallocations by $STKMRET.  */
-    long segments;		/* Current number of stack segments.  */
-    long maxs;			/* Maximum number of stack segments so far.  */
-    long pad_size;		/* Stack pad size.  */
-    long current_address;	/* Current stack segment address.  */
-    long current_size;		/* Current stack segment size.  This
-				   number is actually corrupted by STKSTAT to
-				   include the fifteen word trailer area.  */
-    long initial_address;	/* Address of initial segment.  */
-    long initial_size;		/* Size of initial segment.  */
-  };
-
-/* The following structure describes the data structure which trails
-   any stack segment.  I think that the description in 'asdef' is
-   out of date.  I only describe the parts that I am sure about.  */
-
-struct stk_trailer
-  {
-    long this_address;		/* Address of this block.  */
-    long this_size;		/* Size of this block (does not include
-				   this trailer).  */
-    long unknown2;
-    long unknown3;
-    long link;			/* Address of trailer block of previous
-				   segment.  */
-    long unknown5;
-    long unknown6;
-    long unknown7;
-    long unknown8;
-    long unknown9;
-    long unknown10;
-    long unknown11;
-    long unknown12;
-    long unknown13;
-    long unknown14;
-  };
-
-#endif /* CRAY2 */
-#endif /* not CRAY_STACK */
-
-#ifdef CRAY2
-/* Determine a "stack measure" for an arbitrary ADDRESS.
-   I doubt that "lint" will like this much. */
-
-static long
-i00afunc (long *address)
-{
-  struct stk_stat status;
-  struct stk_trailer *trailer;
-  long *block, size;
-  long result = 0;
-
-  /* We want to iterate through all of the segments.  The first
-     step is to get the stack status structure.  We could do this
-     more quickly and more directly, perhaps, by referencing the
-     $LM00 common block, but I know that this works.  */
-
-  STKSTAT (&status);
-
-  /* Set up the iteration.  */
-
-  trailer = (struct stk_trailer *) (status.current_address
-				    + status.current_size
-				    - 15);
-
-  /* There must be at least one stack segment.  Therefore it is
-     a fatal error if "trailer" is null.  */
-
-  if (trailer == 0)
-    abort ();
-
-  /* Discard segments that do not contain our argument address.  */
-
-  while (trailer != 0)
-    {
-      block = (long *) trailer->this_address;
-      size = trailer->this_size;
-      if (block == 0 || size == 0)
-	abort ();
-      trailer = (struct stk_trailer *) trailer->link;
-      if ((block <= address) && (address < (block + size)))
-	break;
-    }
-
-  /* Set the result to the offset in this segment and add the sizes
-     of all predecessor segments.  */
-
-  result = address - block;
-
-  if (trailer == 0)
-    {
-      return result;
-    }
-
-  do
-    {
-      if (trailer->this_size <= 0)
-	abort ();
-      result += trailer->this_size;
-      trailer = (struct stk_trailer *) trailer->link;
-    }
-  while (trailer != 0);
-
-  /* We are done.  Note that if you present a bogus address (one
-     not in any segment), you will get a different number back, formed
-     from subtracting the address of the first block.  This is probably
-     not what you want.  */
-
-  return (result);
-}
-
-#else /* not CRAY2 */
-/* Stack address function for a CRAY-1, CRAY X-MP, or CRAY Y-MP.
-   Determine the number of the cell within the stack,
-   given the address of the cell.  The purpose of this
-   routine is to linearize, in some sense, stack addresses
-   for alloca.  */
-
-static long
-i00afunc (long address)
-{
-  long stkl = 0;
-
-  long size, pseg, this_segment, stack;
-  long result = 0;
-
-  struct stack_segment_linkage *ssptr;
-
-  /* Register B67 contains the address of the end of the
-     current stack segment.  If you (as a subprogram) store
-     your registers on the stack and find that you are past
-     the contents of B67, you have overflowed the segment.
-
-     B67 also points to the stack segment linkage control
-     area, which is what we are really interested in.  */
-
-  stkl = CRAY_STACKSEG_END ();
-  ssptr = (struct stack_segment_linkage *) stkl;
-
-  /* If one subtracts 'size' from the end of the segment,
-     one has the address of the first word of the segment.
-
-     If this is not the first segment, 'pseg' will be
-     nonzero.  */
-
-  pseg = ssptr->sspseg;
-  size = ssptr->sssize;
-
-  this_segment = stkl - size;
-
-  /* It is possible that calling this routine itself caused
-     a stack overflow.  Discard stack segments which do not
-     contain the target address.  */
-
-  while (!(this_segment <= address && address <= stkl))
-    {
-#ifdef DEBUG_I00AFUNC
-      fprintf (stderr, "%011o %011o %011o\n", this_segment, address, stkl);
-#endif
-      if (pseg == 0)
-	break;
-      stkl = stkl - pseg;
-      ssptr = (struct stack_segment_linkage *) stkl;
-      size = ssptr->sssize;
-      pseg = ssptr->sspseg;
-      this_segment = stkl - size;
-    }
-
-  result = address - this_segment;
-
-  /* If you subtract pseg from the current end of the stack,
-     you get the address of the previous stack segment's end.
-     This seems a little convoluted to me, but I'll bet you save
-     a cycle somewhere.  */
-
-  while (pseg != 0)
-    {
-#ifdef DEBUG_I00AFUNC
-      fprintf (stderr, "%011o %011o\n", pseg, size);
-#endif
-      stkl = stkl - pseg;
-      ssptr = (struct stack_segment_linkage *) stkl;
-      size = ssptr->sssize;
-      pseg = ssptr->sspseg;
-      result += size;
-    }
-  return (result);
-}
-
-#endif /* not CRAY2 */
-#endif /* CRAY */
-
-#endif /* no alloca */
-#endif /* not GCC version 2 */
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/debflex.awk b/WebKitTools/android/flex-2.5.4a/MISC/debflex.awk
deleted file mode 100644
index b1eda49..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/debflex.awk
+++ /dev/null
@@ -1,119 +0,0 @@
-# Clarify the flex debug trace by substituting first line of each rule.
-# Francois Pinard <pinard@iro.umontreal.ca>, July 1990.
-#
-# Rewritten to process correctly \n's in scanner input.
-# BEGIN section modified to correct a collection of rules.
-# Michal Jaegermann <michal@phys.ualberta.ca>, December 1993
-#
-# Sample usage:
-#	flex -d PROGRAM.l
-#	gcc -o PROGRAM PROGRAM.c -lfl
-#	PROGRAM 2>&1 | gawk -f debflex.awk PROGRAM.l
-#
-# (VP's note: this script presently does not work with either "old" or
-#  "new" awk; fixes so it does will be welcome)
-
-BEGIN {
-    # Insure proper usage.
-
-    if (ARGC != 2) {
-	print "usage: gawk -f debflex.awk FLEX_SOURCE <DEBUG_OUTPUT";
-	exit (1);
-    }
-
-    # Remove and save the name of flex source.
-
-    source = ARGV[1];
-    ARGC--;
-
-    # Swallow the flex source file.
-
-    line = 0;
-    section = 1;
-    while (getline <source) {
-
-	# Count the lines.
-
-	line++;
-
-	# Count the sections.  When encountering section 3,
-	# break out of the awk BEGIN block.
-
-	if (match ($0, /^%%/)) {
-	    section++;
-	    if (section == 3) {
-		break;
-	    }
-	}
-	else {
-	    # Only the lines in section 2 which do not begin in a
-	    # tab or space might be referred to by the flex debug
-	    # trace.  Save only those lines.
-
-	    if (section == 2 && match ($0, /^[^ \t]/)) {
-		rules[line] = $0;
-	    }
-	}
-    }
-    dashes = "-----------------------------------------------------------";
-    collect = "";
-    line = 0;
-}
-
-# collect complete rule output from a scanner
-$0 !~ /^--/ {
-    collect = collect "\n" $0;
-    next;
-}
-# otherwise we have a new rule - process what we got so far
-{
-    process();
-}
-# and the same thing if we hit EOF
-END {
-    process();
-}
-
-function process() {
-
-    # splitting this way we loose some double dashes and
-    # left parentheses from echoed input - a small price to pay
-    n = split(collect, field, "\n--|[(]");
-
-    # this loop kicks in only when we already collected something
-    for (i = 1; i <= n; i++) {
-	if (0 != line) {
-	    # we do not care for traces of newlines.
-	    if (0 == match(field[i], /\"\n+\"[)]/)) {
-		if (rules[line]) {
-		    text = field[i];
-		    while ( ++i <= n) {
-			text = text field[i];
-		    }
-		    printf("%s:%d: %-8s -- %s\n",
-			   source, line, text, rules[line]);
-		}
-		else {
-		    print;
-		    printf "%s:%d: *** No such rule.\n", source, line;
-		}
-	    }
-	    line = 0;
-	    break;
-	}
-	if ("" != field[i]) {
-	    if ("end of buffer or a NUL)" == field[i]) {
-		print dashes;  # Simplify trace of buffer reloads
-		continue;
-	    }
-	    if (match(field[i], /accepting rule at line /)) {
-		# force interpretation of line as a number
-		line = 0 + substr(field[i], RLENGTH);
-		continue;
-	    }
-	    # echo everything else
-	    printf("--%s\n", field[i]);
-	}
-    }
-    collect = "\n" $0;  # ... and start next trace
-}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/README b/WebKitTools/android/flex-2.5.4a/MISC/fastwc/README
deleted file mode 100644
index 0dd3afe..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/README
+++ /dev/null
@@ -1,56 +0,0 @@
-This directory contains some examples illustrating techniques for extracting
-high-performance from flex scanners.  Each program implements a simplified
-version of the Unix "wc" tool: read text from stdin and print the number of
-characters, words, and lines present in the text.  All programs were compiled
-using gcc (version unavailable, sorry) with the -O flag, and run on a
-SPARCstation 1+.  The input used was a PostScript file, mainly containing
-figures, with the following "wc" counts:
-
-	lines  words  characters
-	214217 635954 2592172
-
-
-The basic principles illustrated by these programs are:
-
-	- match as much text with each rule as possible
-	- adding rules does not slow you down!
-	- avoid backing up
-
-and the big caveat that comes with them is:
-
-	- you buy performance with decreased maintainability; make
-	  sure you really need it before applying the above techniques.
-
-See the "Performance Considerations" section of flexdoc for more
-details regarding these principles.
-
-
-The different versions of "wc":
-
-	mywc.c
-		a simple but fairly efficient C version
-
-	wc1.l	a naive flex "wc" implementation
-
-	wc2.l	somewhat faster; adds rules to match multiple tokens at once
-
-	wc3.l	faster still; adds more rules to match longer runs of tokens
-
-	wc4.l	fastest; still more rules added; hard to do much better
-		using flex (or, I suspect, hand-coding)
-
-	wc5.l	identical to wc3.l except one rule has been slightly
-		shortened, introducing backing-up
-
-Timing results (all times in user CPU seconds):
-
-	program	  time 	 notes
-	-------   ----   -----
-	wc1       16.4   default flex table compression (= -Cem)
-	wc1        6.7   -Cf compression option
-	/bin/wc	   5.8	 Sun's standard "wc" tool
-	mywc	   4.6   simple but better C implementation!
-	wc2	   4.6   as good as C implementation; built using -Cf
-	wc3	   3.8   -Cf
-	wc4	   3.3   -Cf
-	wc5	   5.7   -Cf; ouch, backing up is expensive
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/mywc.c b/WebKitTools/android/flex-2.5.4a/MISC/fastwc/mywc.c
deleted file mode 100644
index 92e5a36..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/mywc.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/* A simple but fairly efficient C version of the Unix "wc" tool */
-
-#include <stdio.h>
-#include <ctype.h>
-
-main()
-{
-	register int c, cc = 0, wc = 0, lc = 0;
-	FILE *f = stdin;
-
-	while ((c = getc(f)) != EOF) {
-		++cc;
-		if (isgraph(c)) {
-			++wc;
-			do {
-				c = getc(f);
-				if (c == EOF)
-					goto done;
-				++cc;
-			} while (isgraph(c));
-		}
-		if (c == '\n')
-			++lc;
-	}
-done:	printf( "%8d%8d%8d\n", lc, wc, cc );
-}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc1.l b/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc1.l
deleted file mode 100644
index d6696bc..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc1.l
+++ /dev/null
@@ -1,18 +0,0 @@
-/* First cut at a flex-based "wc" tool. */
-
-ws    [ \t]
-nonws [^ \t\n]
-
-%%
-	int cc = 0, wc = 0, lc = 0;
-
-{nonws}+	cc += yyleng; ++wc;
-
-{ws}+		cc += yyleng;
-
-\n		++lc; ++cc;
-
-<<EOF>>		{
-		printf( "%8d %8d %8d\n", lc, wc, cc );
-		yyterminate();
-		}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc2.l b/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc2.l
deleted file mode 100644
index bd63cd4..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc2.l
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Somewhat faster "wc" tool: match more text with each rule */
-
-ws    [ \t]
-nonws [^ \t\n]
-word  {ws}*{nonws}+
-
-%%
-	int cc = 0, wc = 0, lc = 0;
-
-{word}{ws}*	cc += yyleng; ++wc;
-{word}{ws}*\n	cc += yyleng; ++wc; ++lc;
-
-{ws}+		cc += yyleng;
-
-\n+		cc += yyleng; lc += yyleng;
-
-<<EOF>>		{
-		printf( "%8d %8d %8d\n", lc, wc, cc );
-		yyterminate();
-		}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc3.l b/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc3.l
deleted file mode 100644
index 7c5f2e2..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc3.l
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Somewhat faster still: potentially match a lot of text with each rule */
-
-ws    [ \t]
-nonws [^ \t\n]
-word  {ws}*{nonws}+
-words {word}{ws}+
-
-%%
-	int cc = 0, wc = 0, lc = 0;
-
-{word}{ws}*		cc += yyleng; ++wc;
-{word}{ws}*\n		cc += yyleng; ++wc; ++lc;
-{words}{word}{ws}*	cc += yyleng; wc += 2;
-{words}{2}{word}{ws}*	cc += yyleng; wc += 3;
-{words}{3}{word}{ws}*	cc += yyleng; wc += 4;
-
-{ws}+			cc += yyleng;
-
-\n+			cc += yyleng; lc += yyleng;
-
-<<EOF>>		{
-		printf( "%8d %8d %8d\n", lc, wc, cc );
-		yyterminate();
-		}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc4.l b/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc4.l
deleted file mode 100644
index cbe56f6..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc4.l
+++ /dev/null
@@ -1,27 +0,0 @@
-/* Fastest version of wc: add rules to pick up newlines, too */
-
-ws    [ \t]
-nonws [^ \t\n]
-word  {ws}*{nonws}+
-words {word}{ws}+
-
-%%
-	int cc = 0, wc = 0, lc = 0;
-
-{word}{ws}*		++wc; cc += yyleng;
-{word}{ws}*\n		++wc; cc += yyleng; ++lc;
-{words}{word}{ws}*	wc += 2; cc += yyleng;
-{words}{word}{ws}*\n	wc += 2; cc += yyleng; ++lc;
-{words}{2}{word}{ws}*	wc += 3; cc += yyleng;
-{words}{2}{word}{ws}*\n	wc += 3; cc += yyleng; ++lc;
-{words}{3}{word}{ws}*	wc += 4; cc += yyleng;
-{words}{3}{word}{ws}*\n	wc += 4; cc += yyleng; ++lc;
-
-{ws}+			cc += yyleng;
-
-\n+			cc += yyleng; lc += yyleng;
-
-<<EOF>>		{
-		printf( "%8d %8d %8d\n", lc, wc, cc );
-		yyterminate();
-		}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc5.l b/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc5.l
deleted file mode 100644
index 8fe17b6..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/fastwc/wc5.l
+++ /dev/null
@@ -1,24 +0,0 @@
-/* Oops; slight change from wc3.l introduces backtracking */
-
-ws    [ \t]
-nonws [^ \t\n]
-word  {ws}*{nonws}+
-words {word}{ws}+
-
-%%
-	int cc = 0, wc = 0, lc = 0;
-
-{word}{ws}*		cc += yyleng; ++wc;
-{word}{ws}*\n		cc += yyleng; ++wc; ++lc;
-{words}{word}		cc += yyleng; wc += 2;	/* oops */
-{words}{2}{word}{ws}*	cc += yyleng; wc += 3;
-{words}{3}{word}{ws}*	cc += yyleng; wc += 4;
-
-{ws}+			cc += yyleng;
-
-\n+			cc += yyleng; lc += yyleng;
-
-<<EOF>>		{
-		printf( "%8d %8d %8d\n", lc, wc, cc );
-		yyterminate();
-		}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/flex.man b/WebKitTools/android/flex-2.5.4a/MISC/flex.man
deleted file mode 100644
index d41f5ba..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/flex.man
+++ /dev/null
@@ -1,3696 +0,0 @@
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-NAME
-     flex - fast lexical analyzer generator
-
-SYNOPSIS
-     flex [-bcdfhilnpstvwBFILTV78+? -C[aefFmr] -ooutput  -Pprefix
-     -Sskeleton] [--help --version] [filename ...]
-
-OVERVIEW
-     This manual describes flex, a tool for  generating  programs
-     that  perform pattern-matching on text.  The manual includes
-     both tutorial and reference sections:
-
-         Description
-             a brief overview of the tool
-
-         Some Simple Examples
-
-         Format Of The Input File
-
-         Patterns
-             the extended regular expressions used by flex
-
-         How The Input Is Matched
-             the rules for determining what has been matched
-
-         Actions
-             how to specify what to do when a pattern is matched
-
-         The Generated Scanner
-             details regarding the scanner that flex produces;
-             how to control the input source
-
-         Start Conditions
-             introducing context into your scanners, and
-             managing "mini-scanners"
-
-         Multiple Input Buffers
-             how to manipulate multiple input sources; how to
-             scan from strings instead of files
-
-         End-of-file Rules
-             special rules for matching the end of the input
-
-         Miscellaneous Macros
-             a summary of macros available to the actions
-
-         Values Available To The User
-             a summary of values available to the actions
-
-         Interfacing With Yacc
-             connecting flex scanners together with yacc parsers
-
-
-
-
-Version 2.5          Last change: April 1995                    1
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         Options
-             flex command-line options, and the "%option"
-             directive
-
-         Performance Considerations
-             how to make your scanner go as fast as possible
-
-         Generating C++ Scanners
-             the (experimental) facility for generating C++
-             scanner classes
-
-         Incompatibilities With Lex And POSIX
-             how flex differs from AT&T lex and the POSIX lex
-             standard
-
-         Diagnostics
-             those error messages produced by flex (or scanners
-             it generates) whose meanings might not be apparent
-
-         Files
-             files used by flex
-
-         Deficiencies / Bugs
-             known problems with flex
-
-         See Also
-             other documentation, related tools
-
-         Author
-             includes contact information
-
-
-DESCRIPTION
-     flex is a  tool  for  generating  scanners:  programs  which
-     recognized  lexical  patterns in text.  flex reads the given
-     input files, or its standard input  if  no  file  names  are
-     given,  for  a  description  of  a scanner to generate.  The
-     description is in the form of pairs of  regular  expressions
-     and  C  code,  called  rules.  flex  generates as output a C
-     source file, lex.yy.c, which defines a routine yylex(). This
-     file is compiled and linked with the -lfl library to produce
-     an executable.  When the executable is run, it analyzes  its
-     input  for occurrences of the regular expressions.  Whenever
-     it finds one, it executes the corresponding C code.
-
-SOME SIMPLE EXAMPLES
-     First some simple examples to get the flavor of how one uses
-     flex.  The  following  flex  input specifies a scanner which
-     whenever it encounters the string "username" will replace it
-     with the user's login name:
-
-         %%
-
-
-
-Version 2.5          Last change: April 1995                    2
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         username    printf( "%s", getlogin() );
-
-     By default, any text not matched by a flex scanner is copied
-     to  the output, so the net effect of this scanner is to copy
-     its input file to its output with each occurrence of  "user-
-     name"  expanded.   In  this  input,  there is just one rule.
-     "username" is the pattern and the "printf"  is  the  action.
-     The "%%" marks the beginning of the rules.
-
-     Here's another simple example:
-
-                 int num_lines = 0, num_chars = 0;
-
-         %%
-         \n      ++num_lines; ++num_chars;
-         .       ++num_chars;
-
-         %%
-         main()
-                 {
-                 yylex();
-                 printf( "# of lines = %d, # of chars = %d\n",
-                         num_lines, num_chars );
-                 }
-
-     This scanner counts the number of characters and the  number
-     of  lines in its input (it produces no output other than the
-     final report on the counts).  The first  line  declares  two
-     globals,  "num_lines"  and "num_chars", which are accessible
-     both inside yylex() and in the main() routine declared after
-     the  second  "%%".  There are two rules, one which matches a
-     newline ("\n") and increments both the line  count  and  the
-     character  count,  and one which matches any character other
-     than a newline (indicated by the "." regular expression).
-
-     A somewhat more complicated example:
-
-         /* scanner for a toy Pascal-like language */
-
-         %{
-         /* need this for the call to atof() below */
-         #include <math.h>
-         %}
-
-         DIGIT    [0-9]
-         ID       [a-z][a-z0-9]*
-
-         %%
-
-         {DIGIT}+    {
-                     printf( "An integer: %s (%d)\n", yytext,
-                             atoi( yytext ) );
-
-
-
-Version 2.5          Last change: April 1995                    3
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-                     }
-
-         {DIGIT}+"."{DIGIT}*        {
-                     printf( "A float: %s (%g)\n", yytext,
-                             atof( yytext ) );
-                     }
-
-         if|then|begin|end|procedure|function        {
-                     printf( "A keyword: %s\n", yytext );
-                     }
-
-         {ID}        printf( "An identifier: %s\n", yytext );
-
-         "+"|"-"|"*"|"/"   printf( "An operator: %s\n", yytext );
-
-         "{"[^}\n]*"}"     /* eat up one-line comments */
-
-         [ \t\n]+          /* eat up whitespace */
-
-         .           printf( "Unrecognized character: %s\n", yytext );
-
-         %%
-
-         main( argc, argv )
-         int argc;
-         char **argv;
-             {
-             ++argv, --argc;  /* skip over program name */
-             if ( argc > 0 )
-                     yyin = fopen( argv[0], "r" );
-             else
-                     yyin = stdin;
-
-             yylex();
-             }
-
-     This is the beginnings of a simple scanner  for  a  language
-     like  Pascal.   It  identifies different types of tokens and
-     reports on what it has seen.
-
-     The details of this example will be explained in the follow-
-     ing sections.
-
-FORMAT OF THE INPUT FILE
-     The flex input file consists of three sections, separated by
-     a line with just %% in it:
-
-         definitions
-         %%
-         rules
-         %%
-         user code
-
-
-
-Version 2.5          Last change: April 1995                    4
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     The definitions section contains declarations of simple name
-     definitions  to  simplify  the  scanner  specification,  and
-     declarations of start conditions, which are explained  in  a
-     later section.
-
-     Name definitions have the form:
-
-         name definition
-
-     The "name" is a word beginning with a letter  or  an  under-
-     score  ('_')  followed by zero or more letters, digits, '_',
-     or '-' (dash).  The definition is  taken  to  begin  at  the
-     first  non-white-space character following the name and con-
-     tinuing to the end of the line.  The definition  can  subse-
-     quently  be referred to using "{name}", which will expand to
-     "(definition)".  For example,
-
-         DIGIT    [0-9]
-         ID       [a-z][a-z0-9]*
-
-     defines "DIGIT" to be a regular expression which  matches  a
-     single  digit,  and  "ID"  to  be a regular expression which
-     matches a letter followed by zero-or-more letters-or-digits.
-     A subsequent reference to
-
-         {DIGIT}+"."{DIGIT}*
-
-     is identical to
-
-         ([0-9])+"."([0-9])*
-
-     and matches one-or-more digits followed by a '.' followed by
-     zero-or-more digits.
-
-     The rules section of the flex input  contains  a  series  of
-     rules of the form:
-
-         pattern   action
-
-     where the pattern must be unindented  and  the  action  must
-     begin on the same line.
-
-     See below for a further description of patterns and actions.
-
-     Finally, the user code section is simply copied to  lex.yy.c
-     verbatim.   It  is used for companion routines which call or
-     are called by the scanner.  The presence of this section  is
-     optional;  if it is missing, the second %% in the input file
-     may be skipped, too.
-
-     In the definitions and rules sections, any indented text  or
-     text  enclosed in %{ and %} is copied verbatim to the output
-
-
-
-Version 2.5          Last change: April 1995                    5
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     (with the %{}'s removed).  The %{}'s must appear  unindented
-     on lines by themselves.
-
-     In the rules section, any indented  or  %{}  text  appearing
-     before the first rule may be used to declare variables which
-     are local to the scanning routine and  (after  the  declara-
-     tions)  code  which  is to be executed whenever the scanning
-     routine is entered.  Other indented or %{} text in the  rule
-     section  is  still  copied to the output, but its meaning is
-     not well-defined and it may well cause  compile-time  errors
-     (this feature is present for POSIX compliance; see below for
-     other such features).
-
-     In the definitions section (but not in the  rules  section),
-     an  unindented comment (i.e., a line beginning with "/*") is
-     also copied verbatim to the output up to the next "*/".
-
-PATTERNS
-     The patterns in the input are written using an extended  set
-     of regular expressions.  These are:
-
-         x          match the character 'x'
-         .          any character (byte) except newline
-         [xyz]      a "character class"; in this case, the pattern
-                      matches either an 'x', a 'y', or a 'z'
-         [abj-oZ]   a "character class" with a range in it; matches
-                      an 'a', a 'b', any letter from 'j' through 'o',
-                      or a 'Z'
-         [^A-Z]     a "negated character class", i.e., any character
-                      but those in the class.  In this case, any
-                      character EXCEPT an uppercase letter.
-         [^A-Z\n]   any character EXCEPT an uppercase letter or
-                      a newline
-         r*         zero or more r's, where r is any regular expression
-         r+         one or more r's
-         r?         zero or one r's (that is, "an optional r")
-         r{2,5}     anywhere from two to five r's
-         r{2,}      two or more r's
-         r{4}       exactly 4 r's
-         {name}     the expansion of the "name" definition
-                    (see above)
-         "[xyz]\"foo"
-                    the literal string: [xyz]"foo
-         \X         if X is an 'a', 'b', 'f', 'n', 'r', 't', or 'v',
-                      then the ANSI-C interpretation of \x.
-                      Otherwise, a literal 'X' (used to escape
-                      operators such as '*')
-         \0         a NUL character (ASCII code 0)
-         \123       the character with octal value 123
-         \x2a       the character with hexadecimal value 2a
-         (r)        match an r; parentheses are used to override
-                      precedence (see below)
-
-
-
-Version 2.5          Last change: April 1995                    6
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         rs         the regular expression r followed by the
-                      regular expression s; called "concatenation"
-
-
-         r|s        either an r or an s
-
-
-         r/s        an r but only if it is followed by an s.  The
-                      text matched by s is included when determining
-                      whether this rule is the "longest match",
-                      but is then returned to the input before
-                      the action is executed.  So the action only
-                      sees the text matched by r.  This type
-                      of pattern is called trailing context".
-                      (There are some combinations of r/s that flex
-                      cannot match correctly; see notes in the
-                      Deficiencies / Bugs section below regarding
-                      "dangerous trailing context".)
-         ^r         an r, but only at the beginning of a line (i.e.,
-                      which just starting to scan, or right after a
-                      newline has been scanned).
-         r$         an r, but only at the end of a line (i.e., just
-                      before a newline).  Equivalent to "r/\n".
-
-                    Note that flex's notion of "newline" is exactly
-                    whatever the C compiler used to compile flex
-                    interprets '\n' as; in particular, on some DOS
-                    systems you must either filter out \r's in the
-                    input yourself, or explicitly use r/\r\n for "r$".
-
-
-         <s>r       an r, but only in start condition s (see
-                      below for discussion of start conditions)
-         <s1,s2,s3>r
-                    same, but in any of start conditions s1,
-                      s2, or s3
-         <*>r       an r in any start condition, even an exclusive one.
-
-
-         <<EOF>>    an end-of-file
-         <s1,s2><<EOF>>
-                    an end-of-file when in start condition s1 or s2
-
-     Note that inside of a character class, all  regular  expres-
-     sion  operators  lose  their  special  meaning except escape
-     ('\') and the character class operators, '-', ']',  and,  at
-     the beginning of the class, '^'.
-
-     The regular expressions listed above are  grouped  according
-     to  precedence, from highest precedence at the top to lowest
-     at the bottom.   Those  grouped  together  have  equal  pre-
-     cedence.  For example,
-
-
-
-Version 2.5          Last change: April 1995                    7
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         foo|bar*
-
-     is the same as
-
-         (foo)|(ba(r*))
-
-     since the '*' operator has higher precedence than concatena-
-     tion, and concatenation higher than alternation ('|').  This
-     pattern therefore matches either the  string  "foo"  or  the
-     string "ba" followed by zero-or-more r's.  To match "foo" or
-     zero-or-more "bar"'s, use:
-
-         foo|(bar)*
-
-     and to match zero-or-more "foo"'s-or-"bar"'s:
-
-         (foo|bar)*
-
-
-     In addition to characters and ranges of characters,  charac-
-     ter  classes  can  also contain character class expressions.
-     These are expressions enclosed inside [: and  :]  delimiters
-     (which themselves must appear between the '[' and ']' of the
-     character class; other elements may occur inside the charac-
-     ter class, too).  The valid expressions are:
-
-         [:alnum:] [:alpha:] [:blank:]
-         [:cntrl:] [:digit:] [:graph:]
-         [:lower:] [:print:] [:punct:]
-         [:space:] [:upper:] [:xdigit:]
-
-     These  expressions  all  designate  a  set   of   characters
-     equivalent  to  the corresponding standard C isXXX function.
-     For example, [:alnum:] designates those characters for which
-     isalnum()  returns  true  - i.e., any alphabetic or numeric.
-     Some  systems  don't  provide  isblank(),  so  flex  defines
-     [:blank:] as a blank or a tab.
-
-     For  example,  the  following  character  classes  are   all
-     equivalent:
-
-         [[:alnum:]]
-         [[:alpha:][:digit:]
-         [[:alpha:]0-9]
-         [a-zA-Z0-9]
-
-     If your scanner is  case-insensitive  (the  -i  flag),  then
-     [:upper:] and [:lower:] are equivalent to [:alpha:].
-
-     Some notes on patterns:
-
-     -    A negated character class such as the example  "[^A-Z]"
-
-
-
-Version 2.5          Last change: April 1995                    8
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-          above   will   match  a  newline  unless  "\n"  (or  an
-          equivalent escape sequence) is one  of  the  characters
-          explicitly  present  in  the  negated  character  class
-          (e.g., "[^A-Z\n]").  This is unlike how many other reg-
-          ular  expression tools treat negated character classes,
-          but unfortunately  the  inconsistency  is  historically
-          entrenched.   Matching  newlines  means  that a pattern
-          like [^"]* can match the entire  input  unless  there's
-          another quote in the input.
-
-     -    A rule can have at most one instance of  trailing  con-
-          text (the '/' operator or the '$' operator).  The start
-          condition, '^', and "<<EOF>>" patterns can  only  occur
-          at the beginning of a pattern, and, as well as with '/'
-          and '$', cannot be grouped inside parentheses.   A  '^'
-          which  does  not  occur at the beginning of a rule or a
-          '$' which does not occur at the end of a rule loses its
-          special  properties  and is treated as a normal charac-
-          ter.
-
-          The following are illegal:
-
-              foo/bar$
-              <sc1>foo<sc2>bar
-
-          Note  that  the  first  of  these,   can   be   written
-          "foo/bar\n".
-
-          The following will result in '$' or '^'  being  treated
-          as a normal character:
-
-              foo|(bar$)
-              foo|^bar
-
-          If what's wanted is a  "foo"  or  a  bar-followed-by-a-
-          newline,  the  following could be used (the special '|'
-          action is explained below):
-
-              foo      |
-              bar$     /* action goes here */
-
-          A similar trick will work for matching a foo or a  bar-
-          at-the-beginning-of-a-line.
-
-HOW THE INPUT IS MATCHED
-     When the generated scanner is run,  it  analyzes  its  input
-     looking  for strings which match any of its patterns.  If it
-     finds more than one match, it takes  the  one  matching  the
-     most  text  (for  trailing  context rules, this includes the
-     length of the trailing part, even though  it  will  then  be
-     returned  to the input).  If it finds two or more matches of
-     the same length, the rule listed first  in  the  flex  input
-
-
-
-Version 2.5          Last change: April 1995                    9
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     file is chosen.
-
-     Once the match is determined, the text corresponding to  the
-     match  (called  the  token)  is made available in the global
-     character pointer yytext,  and  its  length  in  the  global
-     integer yyleng. The action corresponding to the matched pat-
-     tern is  then  executed  (a  more  detailed  description  of
-     actions  follows),  and  then the remaining input is scanned
-     for another match.
-
-     If no match is found, then the default rule is executed: the
-     next character in the input is considered matched and copied
-     to the standard output.  Thus, the simplest legal flex input
-     is:
-
-         %%
-
-     which generates a scanner that simply copies its input  (one
-     character at a time) to its output.
-
-     Note that yytext can  be  defined  in  two  different  ways:
-     either  as  a character pointer or as a character array. You
-     can control which definition flex uses by including  one  of
-     the  special  directives  %pointer  or  %array  in the first
-     (definitions) section of your flex input.   The  default  is
-     %pointer, unless you use the -l lex compatibility option, in
-     which case yytext will be an array.  The advantage of  using
-     %pointer  is  substantially  faster  scanning  and no buffer
-     overflow when matching very large tokens (unless you run out
-     of  dynamic  memory).  The disadvantage is that you are res-
-     tricted in how your actions can modify yytext (see the  next
-     section),  and  calls  to  the unput() function destroys the
-     present contents of yytext,  which  can  be  a  considerable
-     porting headache when moving between different lex versions.
-
-     The advantage of %array is that you can then  modify  yytext
-     to your heart's content, and calls to unput() do not destroy
-     yytext (see  below).   Furthermore,  existing  lex  programs
-     sometimes access yytext externally using declarations of the
-     form:
-         extern char yytext[];
-     This definition is erroneous when used  with  %pointer,  but
-     correct for %array.
-
-     %array defines yytext to be an array of  YYLMAX  characters,
-     which  defaults to a fairly large value.  You can change the
-     size by simply #define'ing YYLMAX to a  different  value  in
-     the  first  section of your flex input.  As mentioned above,
-     with %pointer yytext grows dynamically to accommodate  large
-     tokens.  While this means your %pointer scanner can accommo-
-     date very large tokens (such as matching  entire  blocks  of
-     comments),  bear  in  mind  that  each time the scanner must
-
-
-
-Version 2.5          Last change: April 1995                   10
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     resize yytext it also must rescan the entire token from  the
-     beginning,  so  matching such tokens can prove slow.  yytext
-     presently does not dynamically grow if  a  call  to  unput()
-     results  in too much text being pushed back; instead, a run-
-     time error results.
-
-     Also note that  you  cannot  use  %array  with  C++  scanner
-     classes (the c++ option; see below).
-
-ACTIONS
-     Each pattern in a rule has a corresponding action, which can
-     be any arbitrary C statement.  The pattern ends at the first
-     non-escaped whitespace character; the remainder of the  line
-     is  its  action.  If the action is empty, then when the pat-
-     tern is matched the input token is  simply  discarded.   For
-     example,  here  is  the  specification  for  a program which
-     deletes all occurrences of "zap me" from its input:
-
-         %%
-         "zap me"
-
-     (It will copy all other characters in the input to the  out-
-     put since they will be matched by the default rule.)
-
-     Here is a program which compresses multiple blanks and  tabs
-     down  to a single blank, and throws away whitespace found at
-     the end of a line:
-
-         %%
-         [ \t]+        putchar( ' ' );
-         [ \t]+$       /* ignore this token */
-
-
-     If the action contains a '{', then the action spans till the
-     balancing  '}'  is  found, and the action may cross multiple
-     lines.  flex knows about C strings and comments and won't be
-     fooled  by braces found within them, but also allows actions
-     to begin with %{ and will consider the action to be all  the
-     text up to the next %} (regardless of ordinary braces inside
-     the action).
-
-     An action consisting solely of a vertical  bar  ('|')  means
-     "same  as  the  action for the next rule."  See below for an
-     illustration.
-
-     Actions can  include  arbitrary  C  code,  including  return
-     statements  to  return  a  value  to whatever routine called
-     yylex(). Each time yylex() is called it continues processing
-     tokens  from  where it last left off until it either reaches
-     the end of the file or executes a return.
-
-
-
-
-
-Version 2.5          Last change: April 1995                   11
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     Actions are free to modify yytext except for lengthening  it
-     (adding  characters  to  its end--these will overwrite later
-     characters in the input  stream).   This  however  does  not
-     apply  when  using  %array (see above); in that case, yytext
-     may be freely modified in any way.
-
-     Actions are free to modify yyleng except they should not  do
-     so if the action also includes use of yymore() (see below).
-
-     There are a  number  of  special  directives  which  can  be
-     included within an action:
-
-     -    ECHO copies yytext to the scanner's output.
-
-     -    BEGIN followed by the name of a start condition  places
-          the  scanner  in the corresponding start condition (see
-          below).
-
-     -    REJECT directs the scanner to proceed on to the "second
-          best"  rule which matched the input (or a prefix of the
-          input).  The rule is chosen as described above in  "How
-          the  Input  is  Matched",  and yytext and yyleng set up
-          appropriately.  It may either be one which  matched  as
-          much  text as the originally chosen rule but came later
-          in the flex input file, or one which matched less text.
-          For example, the following will both count the words in
-          the input  and  call  the  routine  special()  whenever
-          "frob" is seen:
-
-                      int word_count = 0;
-              %%
-
-              frob        special(); REJECT;
-              [^ \t\n]+   ++word_count;
-
-          Without the REJECT, any "frob"'s in the input would not
-          be  counted  as  words, since the scanner normally exe-
-          cutes only one action per token.  Multiple REJECT's are
-          allowed,  each  one finding the next best choice to the
-          currently active rule.  For example, when the following
-          scanner  scans the token "abcd", it will write "abcdab-
-          caba" to the output:
-
-              %%
-              a        |
-              ab       |
-              abc      |
-              abcd     ECHO; REJECT;
-              .|\n     /* eat up any unmatched character */
-
-          (The first three rules share the fourth's action  since
-          they   use   the  special  '|'  action.)  REJECT  is  a
-
-
-
-Version 2.5          Last change: April 1995                   12
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-          particularly expensive feature in terms of scanner per-
-          formance; if it is used in any of the scanner's actions
-          it will  slow  down  all  of  the  scanner's  matching.
-          Furthermore,  REJECT cannot be used with the -Cf or -CF
-          options (see below).
-
-          Note also that unlike the other special actions, REJECT
-          is  a  branch;  code  immediately  following  it in the
-          action will not be executed.
-
-     -    yymore() tells  the  scanner  that  the  next  time  it
-          matches  a  rule,  the  corresponding  token  should be
-          appended onto the current value of yytext  rather  than
-          replacing  it.   For  example,  given  the input "mega-
-          kludge" the following will write "mega-mega-kludge"  to
-          the output:
-
-              %%
-              mega-    ECHO; yymore();
-              kludge   ECHO;
-
-          First "mega-" is matched  and  echoed  to  the  output.
-          Then  "kludge"  is matched, but the previous "mega-" is
-          still hanging around at the beginning of yytext so  the
-          ECHO  for  the "kludge" rule will actually write "mega-
-          kludge".
-
-     Two notes regarding use of yymore(). First, yymore() depends
-     on  the value of yyleng correctly reflecting the size of the
-     current token, so you must not  modify  yyleng  if  you  are
-     using  yymore().  Second,  the  presence  of yymore() in the
-     scanner's action entails a minor performance penalty in  the
-     scanner's matching speed.
-
-     -    yyless(n) returns all but the first n characters of the
-          current token back to the input stream, where they will
-          be rescanned when the scanner looks for the next match.
-          yytext  and  yyleng  are  adjusted appropriately (e.g.,
-          yyleng will now be equal to n ).  For example,  on  the
-          input  "foobar"  the  following will write out "foobar-
-          bar":
-
-              %%
-              foobar    ECHO; yyless(3);
-              [a-z]+    ECHO;
-
-          An argument of  0  to  yyless  will  cause  the  entire
-          current  input  string  to  be  scanned  again.  Unless
-          you've changed how the scanner will  subsequently  pro-
-          cess  its  input  (using BEGIN, for example), this will
-          result in an endless loop.
-
-
-
-
-Version 2.5          Last change: April 1995                   13
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     Note that yyless is a macro and can only be used in the flex
-     input file, not from other source files.
-
-     -    unput(c) puts the  character  c  back  onto  the  input
-          stream.   It  will  be the next character scanned.  The
-          following action will take the current token and  cause
-          it to be rescanned enclosed in parentheses.
-
-              {
-              int i;
-              /* Copy yytext because unput() trashes yytext */
-              char *yycopy = strdup( yytext );
-              unput( ')' );
-              for ( i = yyleng - 1; i >= 0; --i )
-                  unput( yycopy[i] );
-              unput( '(' );
-              free( yycopy );
-              }
-
-          Note that since each unput() puts the  given  character
-          back at the beginning of the input stream, pushing back
-          strings must be done back-to-front.
-
-     An important potential problem when using unput() is that if
-     you are using %pointer (the default), a call to unput() des-
-     troys the contents of yytext, starting  with  its  rightmost
-     character  and devouring one character to the left with each
-     call.  If you need the value of  yytext  preserved  after  a
-     call  to  unput() (as in the above example), you must either
-     first copy it elsewhere, or build your scanner using  %array
-     instead (see How The Input Is Matched).
-
-     Finally, note that you cannot put back  EOF  to  attempt  to
-     mark the input stream with an end-of-file.
-
-     -    input() reads the next character from the input stream.
-          For  example, the following is one way to eat up C com-
-          ments:
-
-              %%
-              "/*"        {
-                          register int c;
-
-                          for ( ; ; )
-                              {
-                              while ( (c = input()) != '*' &&
-                                      c != EOF )
-                                  ;    /* eat up text of comment */
-
-                              if ( c == '*' )
-                                  {
-                                  while ( (c = input()) == '*' )
-
-
-
-Version 2.5          Last change: April 1995                   14
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-                                      ;
-                                  if ( c == '/' )
-                                      break;    /* found the end */
-                                  }
-
-                              if ( c == EOF )
-                                  {
-                                  error( "EOF in comment" );
-                                  break;
-                                  }
-                              }
-                          }
-
-          (Note that if the scanner is compiled using  C++,  then
-          input()  is  instead referred to as yyinput(), in order
-          to avoid a name clash with the C++ stream by  the  name
-          of input.)
-
-     -    YY_FLUSH_BUFFER flushes the scanner's  internal  buffer
-          so  that  the next time the scanner attempts to match a
-          token, it will first refill the buffer  using  YY_INPUT
-          (see  The  Generated Scanner, below).  This action is a
-          special case  of  the  more  general  yy_flush_buffer()
-          function, described below in the section Multiple Input
-          Buffers.
-
-     -    yyterminate() can be used in lieu of a return statement
-          in  an action.  It terminates the scanner and returns a
-          0 to the scanner's caller, indicating "all  done".   By
-          default,  yyterminate()  is also called when an end-of-
-          file is encountered.  It is a macro and  may  be  rede-
-          fined.
-
-THE GENERATED SCANNER
-     The output of flex is the file lex.yy.c, which contains  the
-     scanning  routine yylex(), a number of tables used by it for
-     matching tokens, and a number of auxiliary routines and mac-
-     ros.  By default, yylex() is declared as follows:
-
-         int yylex()
-             {
-             ... various definitions and the actions in here ...
-             }
-
-     (If your environment supports function prototypes,  then  it
-     will  be  "int  yylex(  void  )".)   This  definition may be
-     changed by defining the "YY_DECL" macro.  For  example,  you
-     could use:
-
-         #define YY_DECL float lexscan( a, b ) float a, b;
-
-     to give the scanning routine the name lexscan,  returning  a
-
-
-
-Version 2.5          Last change: April 1995                   15
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     float, and taking two floats as arguments.  Note that if you
-     give  arguments  to  the  scanning  routine  using  a   K&R-
-     style/non-prototyped  function  declaration,  you  must ter-
-     minate the definition with a semi-colon (;).
-
-     Whenever yylex() is called, it scans tokens from the  global
-     input  file  yyin  (which  defaults to stdin).  It continues
-     until it either reaches an end-of-file (at  which  point  it
-     returns the value 0) or one of its actions executes a return
-     statement.
-
-     If the scanner reaches an end-of-file, subsequent calls  are
-     undefined  unless either yyin is pointed at a new input file
-     (in which case scanning continues from that file), or yyres-
-     tart()  is called.  yyrestart() takes one argument, a FILE *
-     pointer (which can be nil, if you've set up YY_INPUT to scan
-     from  a  source  other  than yyin), and initializes yyin for
-     scanning from that file.  Essentially there is no difference
-     between  just  assigning  yyin  to a new input file or using
-     yyrestart() to do so; the latter is available  for  compati-
-     bility with previous versions of flex, and because it can be
-     used to switch input files in the middle  of  scanning.   It
-     can  also be used to throw away the current input buffer, by
-     calling it with an argument of yyin; but better  is  to  use
-     YY_FLUSH_BUFFER (see above).  Note that yyrestart() does not
-     reset the start condition to INITIAL (see Start  Conditions,
-     below).
-
-     If yylex() stops scanning due to executing a  return  state-
-     ment  in  one of the actions, the scanner may then be called
-     again and it will resume scanning where it left off.
-
-     By default (and for purposes  of  efficiency),  the  scanner
-     uses  block-reads  rather  than  simple getc() calls to read
-     characters from yyin. The nature of how it  gets  its  input
-     can   be   controlled   by   defining  the  YY_INPUT  macro.
-     YY_INPUT's           calling           sequence           is
-     "YY_INPUT(buf,result,max_size)".   Its action is to place up
-     to max_size characters in the character array buf and return
-     in  the integer variable result either the number of charac-
-     ters read or the constant YY_NULL (0  on  Unix  systems)  to
-     indicate  EOF.   The  default YY_INPUT reads from the global
-     file-pointer "yyin".
-
-     A sample definition of YY_INPUT (in the definitions  section
-     of the input file):
-
-         %{
-         #define YY_INPUT(buf,result,max_size) \
-             { \
-             int c = getchar(); \
-             result = (c == EOF) ? YY_NULL : (buf[0] = c, 1); \
-
-
-
-Version 2.5          Last change: April 1995                   16
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-             }
-         %}
-
-     This definition will change the input  processing  to  occur
-     one character at a time.
-
-     When the scanner receives  an  end-of-file  indication  from
-     YY_INPUT, it then checks the yywrap() function.  If yywrap()
-     returns false (zero), then it is assumed that  the  function
-     has  gone  ahead  and  set up yyin to point to another input
-     file, and scanning continues.   If  it  returns  true  (non-
-     zero),  then  the  scanner  terminates,  returning  0 to its
-     caller.  Note that  in  either  case,  the  start  condition
-     remains unchanged; it does not revert to INITIAL.
-
-     If you do not supply your own version of yywrap(), then  you
-     must  either use %option noyywrap (in which case the scanner
-     behaves as though yywrap() returned 1),  or  you  must  link
-     with  -lfl  to  obtain  the  default version of the routine,
-     which always returns 1.
-
-     Three routines are available  for  scanning  from  in-memory
-     buffers     rather     than     files:     yy_scan_string(),
-     yy_scan_bytes(), and yy_scan_buffer(). See the discussion of
-     them below in the section Multiple Input Buffers.
-
-     The scanner writes its  ECHO  output  to  the  yyout  global
-     (default, stdout), which may be redefined by the user simply
-     by assigning it to some other FILE pointer.
-
-START CONDITIONS
-     flex  provides  a  mechanism  for  conditionally  activating
-     rules.   Any rule whose pattern is prefixed with "<sc>" will
-     only be active when the scanner is in  the  start  condition
-     named "sc".  For example,
-
-         <STRING>[^"]*        { /* eat up the string body ... */
-                     ...
-                     }
-
-     will be active only when the  scanner  is  in  the  "STRING"
-     start condition, and
-
-         <INITIAL,STRING,QUOTE>\.        { /* handle an escape ... */
-                     ...
-                     }
-
-     will be active only when  the  current  start  condition  is
-     either "INITIAL", "STRING", or "QUOTE".
-
-     Start conditions are declared  in  the  definitions  (first)
-     section  of  the input using unindented lines beginning with
-
-
-
-Version 2.5          Last change: April 1995                   17
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     either %s or %x followed by a list  of  names.   The  former
-     declares  inclusive  start  conditions, the latter exclusive
-     start conditions.  A start condition is activated using  the
-     BEGIN  action.   Until  the  next  BEGIN action is executed,
-     rules with the given start  condition  will  be  active  and
-     rules  with other start conditions will be inactive.  If the
-     start condition is inclusive, then rules with no start  con-
-     ditions  at  all  will  also be active.  If it is exclusive,
-     then only rules qualified with the start condition  will  be
-     active.   A  set  of  rules contingent on the same exclusive
-     start condition describe a scanner which is  independent  of
-     any  of the other rules in the flex input.  Because of this,
-     exclusive start conditions make it easy  to  specify  "mini-
-     scanners"  which scan portions of the input that are syntac-
-     tically different from the rest (e.g., comments).
-
-     If the distinction between  inclusive  and  exclusive  start
-     conditions  is still a little vague, here's a simple example
-     illustrating the connection between the  two.   The  set  of
-     rules:
-
-         %s example
-         %%
-
-         <example>foo   do_something();
-
-         bar            something_else();
-
-     is equivalent to
-
-         %x example
-         %%
-
-         <example>foo   do_something();
-
-         <INITIAL,example>bar    something_else();
-
-     Without the <INITIAL,example> qualifier, the bar pattern  in
-     the second example wouldn't be active (i.e., couldn't match)
-     when in start condition example. If we just  used  <example>
-     to  qualify  bar,  though,  then  it would only be active in
-     example and not in INITIAL, while in the first example  it's
-     active  in  both,  because  in the first example the example
-     startion condition is an inclusive (%s) start condition.
-
-     Also note that the  special  start-condition  specifier  <*>
-     matches  every  start  condition.   Thus,  the above example
-     could also have been written;
-
-         %x example
-         %%
-
-
-
-
-Version 2.5          Last change: April 1995                   18
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         <example>foo   do_something();
-
-         <*>bar    something_else();
-
-
-     The default rule (to ECHO any unmatched  character)  remains
-     active in start conditions.  It is equivalent to:
-
-         <*>.|\n     ECHO;
-
-
-     BEGIN(0) returns to the original state where only the  rules
-     with no start conditions are active.  This state can also be
-     referred   to   as   the   start-condition   "INITIAL",   so
-     BEGIN(INITIAL)  is  equivalent to BEGIN(0). (The parentheses
-     around the start condition name are  not  required  but  are
-     considered good style.)
-
-     BEGIN actions can also be given  as  indented  code  at  the
-     beginning  of the rules section.  For example, the following
-     will cause the scanner to enter the "SPECIAL"  start  condi-
-     tion  whenever  yylex()  is  called  and the global variable
-     enter_special is true:
-
-                 int enter_special;
-
-         %x SPECIAL
-         %%
-                 if ( enter_special )
-                     BEGIN(SPECIAL);
-
-         <SPECIAL>blahblahblah
-         ...more rules follow...
-
-
-     To illustrate the  uses  of  start  conditions,  here  is  a
-     scanner  which  provides  two different interpretations of a
-     string like "123.456".  By default it will treat it as three
-     tokens,  the  integer  "123",  a  dot ('.'), and the integer
-     "456".  But if the string is preceded earlier in the line by
-     the  string  "expect-floats"  it  will  treat it as a single
-     token, the floating-point number 123.456:
-
-         %{
-         #include <math.h>
-         %}
-         %s expect
-
-         %%
-         expect-floats        BEGIN(expect);
-
-         <expect>[0-9]+"."[0-9]+      {
-
-
-
-Version 2.5          Last change: April 1995                   19
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-                     printf( "found a float, = %f\n",
-                             atof( yytext ) );
-                     }
-         <expect>\n           {
-                     /* that's the end of the line, so
-                      * we need another "expect-number"
-                      * before we'll recognize any more
-                      * numbers
-                      */
-                     BEGIN(INITIAL);
-                     }
-
-         [0-9]+      {
-                     printf( "found an integer, = %d\n",
-                             atoi( yytext ) );
-                     }
-
-         "."         printf( "found a dot\n" );
-
-     Here is a scanner which recognizes (and discards) C comments
-     while maintaining a count of the current input line.
-
-         %x comment
-         %%
-                 int line_num = 1;
-
-         "/*"         BEGIN(comment);
-
-         <comment>[^*\n]*        /* eat anything that's not a '*' */
-         <comment>"*"+[^*/\n]*   /* eat up '*'s not followed by '/'s */
-         <comment>\n             ++line_num;
-         <comment>"*"+"/"        BEGIN(INITIAL);
-
-     This scanner goes to a bit of trouble to match as much  text
-     as  possible with each rule.  In general, when attempting to
-     write a high-speed scanner try to match as much possible  in
-     each rule, as it's a big win.
-
-     Note that start-conditions names are really  integer  values
-     and  can  be  stored  as  such.   Thus,  the  above could be
-     extended in the following fashion:
-
-         %x comment foo
-         %%
-                 int line_num = 1;
-                 int comment_caller;
-
-         "/*"         {
-                      comment_caller = INITIAL;
-                      BEGIN(comment);
-                      }
-
-
-
-
-Version 2.5          Last change: April 1995                   20
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         ...
-
-         <foo>"/*"    {
-                      comment_caller = foo;
-                      BEGIN(comment);
-                      }
-
-         <comment>[^*\n]*        /* eat anything that's not a '*' */
-         <comment>"*"+[^*/\n]*   /* eat up '*'s not followed by '/'s */
-         <comment>\n             ++line_num;
-         <comment>"*"+"/"        BEGIN(comment_caller);
-
-     Furthermore, you can  access  the  current  start  condition
-     using  the  integer-valued YY_START macro.  For example, the
-     above assignments to comment_caller could instead be written
-
-         comment_caller = YY_START;
-
-     Flex provides YYSTATE as an alias for YY_START  (since  that
-     is what's used by AT&T lex).
-
-     Note that start conditions do not have their own name-space;
-     %s's   and  %x's  declare  names  in  the  same  fashion  as
-     #define's.
-
-     Finally, here's an example of how to  match  C-style  quoted
-     strings using exclusive start conditions, including expanded
-     escape sequences (but not including checking  for  a  string
-     that's too long):
-
-         %x str
-
-         %%
-                 char string_buf[MAX_STR_CONST];
-                 char *string_buf_ptr;
-
-
-         \"      string_buf_ptr = string_buf; BEGIN(str);
-
-         <str>\"        { /* saw closing quote - all done */
-                 BEGIN(INITIAL);
-                 *string_buf_ptr = '\0';
-                 /* return string constant token type and
-                  * value to parser
-                  */
-                 }
-
-         <str>\n        {
-                 /* error - unterminated string constant */
-                 /* generate error message */
-                 }
-
-
-
-
-Version 2.5          Last change: April 1995                   21
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         <str>\\[0-7]{1,3} {
-                 /* octal escape sequence */
-                 int result;
-
-                 (void) sscanf( yytext + 1, "%o", &result );
-
-                 if ( result > 0xff )
-                         /* error, constant is out-of-bounds */
-
-                 *string_buf_ptr++ = result;
-                 }
-
-         <str>\\[0-9]+ {
-                 /* generate error - bad escape sequence; something
-                  * like '\48' or '\0777777'
-                  */
-                 }
-
-         <str>\\n  *string_buf_ptr++ = '\n';
-         <str>\\t  *string_buf_ptr++ = '\t';
-         <str>\\r  *string_buf_ptr++ = '\r';
-         <str>\\b  *string_buf_ptr++ = '\b';
-         <str>\\f  *string_buf_ptr++ = '\f';
-
-         <str>\\(.|\n)  *string_buf_ptr++ = yytext[1];
-
-         <str>[^\\\n\"]+        {
-                 char *yptr = yytext;
-
-                 while ( *yptr )
-                         *string_buf_ptr++ = *yptr++;
-                 }
-
-
-     Often, such as in some of the examples above,  you  wind  up
-     writing  a  whole  bunch  of  rules all preceded by the same
-     start condition(s).  Flex makes this  a  little  easier  and
-     cleaner  by introducing a notion of start condition scope. A
-     start condition scope is begun with:
-
-         <SCs>{
-
-     where SCs is a list of one or more start conditions.  Inside
-     the  start condition scope, every rule automatically has the
-     prefix <SCs> applied to it, until a '}'  which  matches  the
-     initial '{'. So, for example,
-
-         <ESC>{
-             "\\n"   return '\n';
-             "\\r"   return '\r';
-             "\\f"   return '\f';
-             "\\0"   return '\0';
-
-
-
-Version 2.5          Last change: April 1995                   22
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         }
-
-     is equivalent to:
-
-         <ESC>"\\n"  return '\n';
-         <ESC>"\\r"  return '\r';
-         <ESC>"\\f"  return '\f';
-         <ESC>"\\0"  return '\0';
-
-     Start condition scopes may be nested.
-
-     Three routines are  available  for  manipulating  stacks  of
-     start conditions:
-
-     void yy_push_state(int new_state)
-          pushes the current start condition onto the top of  the
-          start  condition  stack  and  switches  to new_state as
-          though you had used BEGIN new_state (recall that  start
-          condition names are also integers).
-
-     void yy_pop_state()
-          pops the top of the stack and switches to it via BEGIN.
-
-     int yy_top_state()
-          returns the top  of  the  stack  without  altering  the
-          stack's contents.
-
-     The start condition stack grows dynamically and  so  has  no
-     built-in  size  limitation.  If memory is exhausted, program
-     execution aborts.
-
-     To use start condition stacks, your scanner must  include  a
-     %option stack directive (see Options below).
-
-MULTIPLE INPUT BUFFERS
-     Some scanners (such as those which support "include"  files)
-     require   reading  from  several  input  streams.   As  flex
-     scanners do a large amount of buffering, one cannot  control
-     where  the  next input will be read from by simply writing a
-     YY_INPUT  which  is  sensitive  to  the  scanning   context.
-     YY_INPUT  is only called when the scanner reaches the end of
-     its buffer, which may be a long time after scanning a state-
-     ment such as an "include" which requires switching the input
-     source.
-
-     To negotiate  these  sorts  of  problems,  flex  provides  a
-     mechanism  for creating and switching between multiple input
-     buffers.  An input buffer is created by using:
-
-         YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
-
-     which takes a FILE pointer and a size and creates  a  buffer
-
-
-
-Version 2.5          Last change: April 1995                   23
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     associated with the given file and large enough to hold size
-     characters (when in doubt, use YY_BUF_SIZE  for  the  size).
-     It  returns  a  YY_BUFFER_STATE  handle,  which  may then be
-     passed to other routines (see below).   The  YY_BUFFER_STATE
-     type is a pointer to an opaque struct yy_buffer_state struc-
-     ture, so you may safely initialize YY_BUFFER_STATE variables
-     to  ((YY_BUFFER_STATE) 0) if you wish, and also refer to the
-     opaque structure in order to correctly declare input buffers
-     in  source files other than that of your scanner.  Note that
-     the FILE pointer in the call  to  yy_create_buffer  is  only
-     used  as the value of yyin seen by YY_INPUT; if you redefine
-     YY_INPUT so it no longer uses yyin, then you can safely pass
-     a nil FILE pointer to yy_create_buffer. You select a partic-
-     ular buffer to scan from using:
-
-         void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
-
-     switches the scanner's input  buffer  so  subsequent  tokens
-     will  come  from new_buffer. Note that yy_switch_to_buffer()
-     may be used by yywrap() to set things up for continued scan-
-     ning, instead of opening a new file and pointing yyin at it.
-     Note  also  that  switching   input   sources   via   either
-     yy_switch_to_buffer()  or yywrap() does not change the start
-     condition.
-
-         void yy_delete_buffer( YY_BUFFER_STATE buffer )
-
-     is used to reclaim the storage associated with a buffer.   (
-     buffer  can be nil, in which case the routine does nothing.)
-     You can also clear the current contents of a buffer using:
-
-         void yy_flush_buffer( YY_BUFFER_STATE buffer )
-
-     This function discards the buffer's contents,  so  the  next
-     time  the scanner attempts to match a token from the buffer,
-     it will first fill the buffer anew using YY_INPUT.
-
-     yy_new_buffer() is an alias for yy_create_buffer(), provided
-     for  compatibility  with  the  C++ use of new and delete for
-     creating and destroying dynamic objects.
-
-     Finally,   the    YY_CURRENT_BUFFER    macro    returns    a
-     YY_BUFFER_STATE handle to the current buffer.
-
-     Here is an example of using these  features  for  writing  a
-     scanner  which expands include files (the <<EOF>> feature is
-     discussed below):
-
-         /* the "incl" state is used for picking up the name
-          * of an include file
-          */
-         %x incl
-
-
-
-Version 2.5          Last change: April 1995                   24
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         %{
-         #define MAX_INCLUDE_DEPTH 10
-         YY_BUFFER_STATE include_stack[MAX_INCLUDE_DEPTH];
-         int include_stack_ptr = 0;
-         %}
-
-         %%
-         include             BEGIN(incl);
-
-         [a-z]+              ECHO;
-         [^a-z\n]*\n?        ECHO;
-
-         <incl>[ \t]*      /* eat the whitespace */
-         <incl>[^ \t\n]+   { /* got the include file name */
-                 if ( include_stack_ptr >= MAX_INCLUDE_DEPTH )
-                     {
-                     fprintf( stderr, "Includes nested too deeply" );
-                     exit( 1 );
-                     }
-
-                 include_stack[include_stack_ptr++] =
-                     YY_CURRENT_BUFFER;
-
-                 yyin = fopen( yytext, "r" );
-
-                 if ( ! yyin )
-                     error( ... );
-
-                 yy_switch_to_buffer(
-                     yy_create_buffer( yyin, YY_BUF_SIZE ) );
-
-                 BEGIN(INITIAL);
-                 }
-
-         <<EOF>> {
-                 if ( --include_stack_ptr < 0 )
-                     {
-                     yyterminate();
-                     }
-
-                 else
-                     {
-                     yy_delete_buffer( YY_CURRENT_BUFFER );
-                     yy_switch_to_buffer(
-                          include_stack[include_stack_ptr] );
-                     }
-                 }
-
-     Three routines are available for setting  up  input  buffers
-     for  scanning  in-memory  strings  instead of files.  All of
-     them create a new input buffer for scanning the string,  and
-     return  a  corresponding  YY_BUFFER_STATE  handle (which you
-
-
-
-Version 2.5          Last change: April 1995                   25
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     should delete with yy_delete_buffer() when  done  with  it).
-     They    also    switch    to    the    new    buffer   using
-     yy_switch_to_buffer(), so the  next  call  to  yylex()  will
-     start scanning the string.
-
-     yy_scan_string(const char *str)
-          scans a NUL-terminated string.
-
-     yy_scan_bytes(const char *bytes, int len)
-          scans len bytes (including possibly NUL's) starting  at
-          location bytes.
-
-     Note that both of these functions create and scan a copy  of
-     the  string or bytes.  (This may be desirable, since yylex()
-     modifies the contents of the buffer it  is  scanning.)   You
-     can avoid the copy by using:
-
-     yy_scan_buffer(char *base, yy_size_t size)
-          which scans in place the buffer starting at base,  con-
-          sisting of size bytes, the last two bytes of which must
-          be YY_END_OF_BUFFER_CHAR (ASCII NUL).  These  last  two
-          bytes  are  not  scanned;  thus,  scanning  consists of
-          base[0] through base[size-2], inclusive.
-
-          If you fail to set up base in this manner (i.e., forget
-          the   final   two  YY_END_OF_BUFFER_CHAR  bytes),  then
-          yy_scan_buffer()  returns  a  nil  pointer  instead  of
-          creating a new input buffer.
-
-          The type yy_size_t is an integral type to which you can
-          cast  an  integer expression reflecting the size of the
-          buffer.
-
-END-OF-FILE RULES
-     The special rule "<<EOF>>" indicates actions which are to be
-     taken  when  an  end-of-file  is  encountered  and  yywrap()
-     returns non-zero (i.e., indicates no further files  to  pro-
-     cess).  The action must finish by doing one of four things:
-
-     -    assigning yyin to a new input file  (in  previous  ver-
-          sions  of  flex,  after doing the assignment you had to
-          call the special action YY_NEW_FILE; this is no  longer
-          necessary);
-
-     -    executing a return statement;
-
-     -    executing the special yyterminate() action;
-
-     -    or,    switching    to    a    new     buffer     using
-          yy_switch_to_buffer() as shown in the example above.
-
-
-
-
-
-Version 2.5          Last change: April 1995                   26
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     <<EOF>> rules may not be used with other patterns; they  may
-     only  be  qualified  with a list of start conditions.  If an
-     unqualified <<EOF>> rule is given, it applies to  all  start
-     conditions  which  do  not already have <<EOF>> actions.  To
-     specify an <<EOF>> rule for only the  initial  start  condi-
-     tion, use
-
-         <INITIAL><<EOF>>
-
-
-     These rules are useful for  catching  things  like  unclosed
-     comments.  An example:
-
-         %x quote
-         %%
-
-         ...other rules for dealing with quotes...
-
-         <quote><<EOF>>   {
-                  error( "unterminated quote" );
-                  yyterminate();
-                  }
-         <<EOF>>  {
-                  if ( *++filelist )
-                      yyin = fopen( *filelist, "r" );
-                  else
-                     yyterminate();
-                  }
-
-
-MISCELLANEOUS MACROS
-     The macro YY_USER_ACTION can be defined to provide an action
-     which is always executed prior to the matched rule's action.
-     For example, it could be #define'd to call a routine to con-
-     vert  yytext to lower-case.  When YY_USER_ACTION is invoked,
-     the variable yy_act gives the number  of  the  matched  rule
-     (rules  are  numbered starting with 1).  Suppose you want to
-     profile how often each of your rules is matched.   The  fol-
-     lowing would do the trick:
-
-         #define YY_USER_ACTION ++ctr[yy_act]
-
-     where ctr is an array to hold the counts for  the  different
-     rules.   Note  that  the  macro YY_NUM_RULES gives the total
-     number of rules (including the default rule, even if you use
-     -s), so a correct declaration for ctr is:
-
-         int ctr[YY_NUM_RULES];
-
-
-     The macro YY_USER_INIT may be defined to provide  an  action
-     which  is  always executed before the first scan (and before
-
-
-
-Version 2.5          Last change: April 1995                   27
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     the scanner's internal initializations are done).  For exam-
-     ple,  it  could  be used to call a routine to read in a data
-     table or open a logging file.
-
-     The macro yy_set_interactive(is_interactive) can be used  to
-     control  whether  the  current buffer is considered interac-
-     tive. An interactive buffer is processed  more  slowly,  but
-     must  be  used  when  the  scanner's  input source is indeed
-     interactive to avoid problems due to waiting to fill buffers
-     (see the discussion of the -I flag below).  A non-zero value
-     in the macro invocation marks the buffer as  interactive,  a
-     zero  value as non-interactive.  Note that use of this macro
-     overrides  %option  always-interactive  or  %option   never-
-     interactive  (see Options below).  yy_set_interactive() must
-     be invoked prior to beginning to scan the buffer that is (or
-     is not) to be considered interactive.
-
-     The macro yy_set_bol(at_bol) can be used to control  whether
-     the  current  buffer's  scanning  context for the next token
-     match is done as though at the beginning of a line.  A  non-
-     zero macro argument makes rules anchored with
-
-     The macro YY_AT_BOL() returns true if the next token scanned
-     from  the  current  buffer will have '^' rules active, false
-     otherwise.
-
-     In the generated scanner, the actions are  all  gathered  in
-     one  large  switch  statement  and separated using YY_BREAK,
-     which may be redefined.  By default, it is simply a "break",
-     to  separate  each  rule's action from the following rule's.
-     Redefining  YY_BREAK  allows,  for  example,  C++  users  to
-     #define  YY_BREAK  to  do  nothing (while being very careful
-     that every rule ends with a "break" or a "return"!) to avoid
-     suffering  from unreachable statement warnings where because
-     a rule's action ends with "return", the YY_BREAK is inacces-
-     sible.
-
-VALUES AVAILABLE TO THE USER
-     This section summarizes the various values available to  the
-     user in the rule actions.
-
-     -    char *yytext holds the text of the current  token.   It
-          may  be  modified but not lengthened (you cannot append
-          characters to the end).
-
-          If the special directive %array appears  in  the  first
-          section  of  the  scanner  description,  then yytext is
-          instead declared char yytext[YYLMAX], where YYLMAX is a
-          macro  definition  that  you  can redefine in the first
-          section if you don't like the default value  (generally
-          8KB).    Using   %array   results  in  somewhat  slower
-          scanners, but the value of  yytext  becomes  immune  to
-
-
-
-Version 2.5          Last change: April 1995                   28
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-          calls to input() and unput(), which potentially destroy
-          its value when yytext  is  a  character  pointer.   The
-          opposite of %array is %pointer, which is the default.
-
-          You cannot  use  %array  when  generating  C++  scanner
-          classes (the -+ flag).
-
-     -    int yyleng holds the length of the current token.
-
-     -    FILE *yyin is the file  which  by  default  flex  reads
-          from.   It  may  be  redefined  but doing so only makes
-          sense before scanning begins or after an EOF  has  been
-          encountered.  Changing it in the midst of scanning will
-          have unexpected results since flex buffers  its  input;
-          use  yyrestart()  instead.   Once  scanning  terminates
-          because an end-of-file has been seen,  you  can  assign
-          yyin  at  the  new input file and then call the scanner
-          again to continue scanning.
-
-     -    void yyrestart( FILE *new_file ) may be called to point
-          yyin at the new input file.  The switch-over to the new
-          file is immediate (any previously buffered-up input  is
-          lost).   Note  that calling yyrestart() with yyin as an
-          argument thus throws away the current input buffer  and
-          continues scanning the same input file.
-
-     -    FILE *yyout is the file to which ECHO actions are done.
-          It can be reassigned by the user.
-
-     -    YY_CURRENT_BUFFER returns a YY_BUFFER_STATE  handle  to
-          the current buffer.
-
-     -    YY_START returns an integer value corresponding to  the
-          current start condition.  You can subsequently use this
-          value with BEGIN to return to that start condition.
-
-INTERFACING WITH YACC
-     One of the main uses of flex is as a companion to  the  yacc
-     parser-generator.   yacc  parsers  expect  to call a routine
-     named yylex() to find the next input token.  The routine  is
-     supposed  to  return  the  type of the next token as well as
-     putting any associated value in the global  yylval.  To  use
-     flex  with  yacc,  one  specifies  the  -d option to yacc to
-     instruct it to generate the file y.tab.h containing  defini-
-     tions  of all the %tokens appearing in the yacc input.  This
-     file is then included in the flex scanner.  For example,  if
-     one of the tokens is "TOK_NUMBER", part of the scanner might
-     look like:
-
-         %{
-         #include "y.tab.h"
-         %}
-
-
-
-Version 2.5          Last change: April 1995                   29
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         %%
-
-         [0-9]+        yylval = atoi( yytext ); return TOK_NUMBER;
-
-
-OPTIONS
-     flex has the following options:
-
-     -b   Generate backing-up information to lex.backup. This  is
-          a  list  of scanner states which require backing up and
-          the input characters on which they do  so.   By  adding
-          rules   one  can  remove  backing-up  states.   If  all
-          backing-up states are eliminated  and  -Cf  or  -CF  is
-          used, the generated scanner will run faster (see the -p
-          flag).  Only users who wish to squeeze every last cycle
-          out  of  their  scanners  need worry about this option.
-          (See the section on Performance Considerations below.)
-
-     -c   is a do-nothing, deprecated option included  for  POSIX
-          compliance.
-
-     -d   makes the generated scanner run in debug  mode.   When-
-          ever   a   pattern   is   recognized   and  the  global
-          yy_flex_debug is non-zero (which is the  default),  the
-          scanner will write to stderr a line of the form:
-
-              --accepting rule at line 53 ("the matched text")
-
-          The line number refers to the location of the  rule  in
-          the  file defining the scanner (i.e., the file that was
-          fed to flex).  Messages are  also  generated  when  the
-          scanner backs up, accepts the default rule, reaches the
-          end of its input buffer (or encounters a NUL;  at  this
-          point,  the  two  look the same as far as the scanner's
-          concerned), or reaches an end-of-file.
-
-     -f   specifies fast scanner. No table  compression  is  done
-          and  stdio  is bypassed.  The result is large but fast.
-          This option is equivalent to -Cfr (see below).
-
-     -h   generates a "help" summary of flex's options to  stdout
-          and then exits.  -? and --help are synonyms for -h.
-
-     -i   instructs flex to generate a case-insensitive  scanner.
-          The  case  of  letters given in the flex input patterns
-          will be ignored,  and  tokens  in  the  input  will  be
-          matched  regardless of case.  The matched text given in
-          yytext will have the preserved case (i.e., it will  not
-          be folded).
-
-     -l   turns on maximum compatibility with the  original  AT&T
-          lex  implementation.  Note that this does not mean full
-
-
-
-Version 2.5          Last change: April 1995                   30
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-          compatibility.  Use of this option costs a considerable
-          amount  of  performance, and it cannot be used with the
-          -+, -f, -F, -Cf, or -CF options.  For  details  on  the
-          compatibilities  it provides, see the section "Incompa-
-          tibilities With Lex And POSIX" below.  This option also
-          results  in the name YY_FLEX_LEX_COMPAT being #define'd
-          in the generated scanner.
-
-     -n   is another do-nothing, deprecated option included  only
-          for POSIX compliance.
-
-     -p   generates a performance report to stderr.   The  report
-          consists  of  comments  regarding  features of the flex
-          input file which will cause a serious loss  of  perfor-
-          mance  in  the resulting scanner.  If you give the flag
-          twice, you will also get  comments  regarding  features
-          that lead to minor performance losses.
-
-          Note that the use  of  REJECT,  %option  yylineno,  and
-          variable  trailing context (see the Deficiencies / Bugs
-          section  below)  entails  a   substantial   performance
-          penalty;  use  of  yymore(), the ^ operator, and the -I
-          flag entail minor performance penalties.
-
-     -s   causes the default rule (that unmatched  scanner  input
-          is  echoed to stdout) to be suppressed.  If the scanner
-          encounters input that does not match any of its  rules,
-          it  aborts  with  an  error.  This option is useful for
-          finding holes in a scanner's rule set.
-
-     -t   instructs flex to write the  scanner  it  generates  to
-          standard output instead of lex.yy.c.
-
-     -v   specifies that flex should write to stderr a summary of
-          statistics regarding the scanner it generates.  Most of
-          the statistics are meaningless to the casual flex user,
-          but the first line identifies the version of flex (same
-          as reported by -V), and the next line  the  flags  used
-          when  generating  the scanner, including those that are
-          on by default.
-
-     -w   suppresses warning messages.
-
-     -B   instructs flex to generate a batch scanner,  the  oppo-
-          site  of  interactive  scanners  generated  by  -I (see
-          below).  In general, you use -B when  you  are  certain
-          that your scanner will never be used interactively, and
-          you want to squeeze a little more  performance  out  of
-          it.   If your goal is instead to squeeze out a lot more
-          performance, you  should   be  using  the  -Cf  or  -CF
-          options  (discussed  below), which turn on -B automati-
-          cally anyway.
-
-
-
-Version 2.5          Last change: April 1995                   31
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     -F   specifies that the fast  scanner  table  representation
-          should  be used (and stdio bypassed).  This representa-
-          tion is about as fast as the full table  representation
-          (-f),  and  for some sets of patterns will be consider-
-          ably smaller (and for others, larger).  In general,  if
-          the  pattern  set contains both "keywords" and a catch-
-          all, "identifier" rule, such as in the set:
-
-              "case"    return TOK_CASE;
-              "switch"  return TOK_SWITCH;
-              ...
-              "default" return TOK_DEFAULT;
-              [a-z]+    return TOK_ID;
-
-          then you're better off using the full table representa-
-          tion.  If only the "identifier" rule is present and you
-          then use a hash table or some such to detect  the  key-
-          words, you're better off using -F.
-
-          This option is equivalent to -CFr (see below).  It can-
-          not be used with -+.
-
-     -I   instructs flex to generate an interactive scanner.   An
-          interactive  scanner  is  one  that only looks ahead to
-          decide what token has been  matched  if  it  absolutely
-          must.  It turns out that always looking one extra char-
-          acter ahead, even  if  the  scanner  has  already  seen
-          enough text to disambiguate the current token, is a bit
-          faster than only looking  ahead  when  necessary.   But
-          scanners  that always look ahead give dreadful interac-
-          tive performance; for example, when a user types a new-
-          line,  it  is  not  recognized as a newline token until
-          they enter another token, which often means  typing  in
-          another whole line.
-
-          Flex scanners default to interactive unless you use the
-          -Cf  or  -CF  table-compression  options  (see  below).
-          That's because if you're looking  for  high-performance
-          you  should  be  using  one of these options, so if you
-          didn't, flex assumes you'd rather trade off  a  bit  of
-          run-time    performance   for   intuitive   interactive
-          behavior.  Note also that you cannot use -I in conjunc-
-          tion  with  -Cf or -CF. Thus, this option is not really
-          needed; it is on by default  for  all  those  cases  in
-          which it is allowed.
-
-          You can force a scanner to not be interactive by  using
-          -B (see above).
-
-     -L   instructs  flex  not  to  generate  #line   directives.
-          Without this option, flex peppers the generated scanner
-          with #line directives so error messages in the  actions
-
-
-
-Version 2.5          Last change: April 1995                   32
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-          will  be  correctly  located with respect to either the
-          original flex input file (if the errors are due to code
-          in  the  input  file),  or  lex.yy.c (if the errors are
-          flex's fault -- you should report these sorts of errors
-          to the email address given below).
-
-     -T   makes flex run in trace mode.  It will generate  a  lot
-          of  messages to stderr concerning the form of the input
-          and the resultant non-deterministic  and  deterministic
-          finite  automata.   This  option  is  mostly for use in
-          maintaining flex.
-
-     -V   prints the version number to stdout and exits.   --ver-
-          sion is a synonym for -V.
-
-     -7   instructs flex to generate a 7-bit scanner,  i.e.,  one
-          which  can  only  recognized  7-bit  characters  in its
-          input.  The advantage of using -7 is that the scanner's
-          tables  can  be  up to half the size of those generated
-          using the -8 option (see below).  The  disadvantage  is
-          that  such  scanners often hang or crash if their input
-          contains an 8-bit character.
-
-          Note, however, that unless you  generate  your  scanner
-          using  the -Cf or -CF table compression options, use of
-          -7 will save only a small amount of  table  space,  and
-          make  your  scanner considerably less portable.  Flex's
-          default behavior is to generate an 8-bit scanner unless
-          you  use the -Cf or -CF, in which case flex defaults to
-          generating 7-bit scanners unless your site  was  always
-          configured to generate 8-bit scanners (as will often be
-          the case with non-USA sites).   You  can  tell  whether
-          flex  generated a 7-bit or an 8-bit scanner by inspect-
-          ing the flag summary in  the  -v  output  as  described
-          above.
-
-          Note that if you use -Cfe or -CFe (those table compres-
-          sion  options,  but  also  using equivalence classes as
-          discussed see below), flex still defaults to generating
-          an  8-bit scanner, since usually with these compression
-          options full 8-bit tables are not much  more  expensive
-          than 7-bit tables.
-
-     -8   instructs flex to generate an 8-bit scanner, i.e.,  one
-          which  can  recognize  8-bit  characters.  This flag is
-          only needed for scanners generated using -Cf or -CF, as
-          otherwise  flex defaults to generating an 8-bit scanner
-          anyway.
-
-          See the discussion  of  -7  above  for  flex's  default
-          behavior  and  the  tradeoffs  between  7-bit and 8-bit
-          scanners.
-
-
-
-Version 2.5          Last change: April 1995                   33
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     -+   specifies that you want flex to generate a C++  scanner
-          class.   See  the  section  on  Generating C++ Scanners
-          below for details.
-
-     -C[aefFmr]
-          controls the degree of table compression and, more gen-
-          erally,  trade-offs  between  small  scanners  and fast
-          scanners.
-
-          -Ca ("align") instructs flex to trade off larger tables
-          in the generated scanner for faster performance because
-          the elements of  the  tables  are  better  aligned  for
-          memory  access and computation.  On some RISC architec-
-          tures, fetching  and  manipulating  longwords  is  more
-          efficient  than with smaller-sized units such as short-
-          words.  This option can double the size of  the  tables
-          used by your scanner.
-
-          -Ce directs  flex  to  construct  equivalence  classes,
-          i.e.,  sets  of characters which have identical lexical
-          properties (for example,  if  the  only  appearance  of
-          digits  in  the  flex  input  is in the character class
-          "[0-9]" then the digits '0', '1', ..., '9' will all  be
-          put   in  the  same  equivalence  class).   Equivalence
-          classes usually give dramatic reductions in  the  final
-          table/object file sizes (typically a factor of 2-5) and
-          are pretty cheap performance-wise  (one  array  look-up
-          per character scanned).
-
-          -Cf specifies that the full scanner  tables  should  be
-          generated - flex should not compress the tables by tak-
-          ing advantages of similar transition functions for dif-
-          ferent states.
-
-          -CF specifies that the alternate fast scanner represen-
-          tation  (described  above  under the -F flag) should be
-          used.  This option cannot be used with -+.
-
-          -Cm directs flex to construct meta-equivalence classes,
-          which  are  sets of equivalence classes (or characters,
-          if equivalence classes are not  being  used)  that  are
-          commonly  used  together.  Meta-equivalence classes are
-          often a big win when using compressed tables, but  they
-          have  a  moderate  performance  impact (one or two "if"
-          tests and one array look-up per character scanned).
-
-          -Cr causes the generated scanner to bypass use  of  the
-          standard  I/O  library  (stdio)  for input.  Instead of
-          calling fread() or getc(), the  scanner  will  use  the
-          read()  system  call,  resulting  in a performance gain
-          which varies from system to system, but in  general  is
-          probably  negligible  unless  you are also using -Cf or
-
-
-
-Version 2.5          Last change: April 1995                   34
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-          -CF. Using -Cr can cause strange behavior if, for exam-
-          ple,  you  read  from yyin using stdio prior to calling
-          the scanner (because the  scanner  will  miss  whatever
-          text  your  previous  reads  left  in  the  stdio input
-          buffer).
-
-          -Cr has no effect if you define YY_INPUT (see The  Gen-
-          erated Scanner above).
-
-          A lone -C specifies that the scanner tables  should  be
-          compressed  but  neither  equivalence classes nor meta-
-          equivalence classes should be used.
-
-          The options -Cf or  -CF  and  -Cm  do  not  make  sense
-          together - there is no opportunity for meta-equivalence
-          classes if the table is not being  compressed.   Other-
-          wise  the  options may be freely mixed, and are cumula-
-          tive.
-
-          The default setting is -Cem, which specifies that  flex
-          should   generate   equivalence   classes   and   meta-
-          equivalence classes.  This setting provides the highest
-          degree   of  table  compression.   You  can  trade  off
-          faster-executing scanners at the cost of larger  tables
-          with the following generally being true:
-
-              slowest & smallest
-                    -Cem
-                    -Cm
-                    -Ce
-                    -C
-                    -C{f,F}e
-                    -C{f,F}
-                    -C{f,F}a
-              fastest & largest
-
-          Note that scanners with the smallest tables are usually
-          generated and compiled the quickest, so during develop-
-          ment you will usually want to use the default,  maximal
-          compression.
-
-          -Cfe is often a good compromise between speed and  size
-          for production scanners.
-
-     -ooutput
-          directs flex to write the scanner to  the  file  output
-          instead  of  lex.yy.c.  If  you  combine -o with the -t
-          option, then the scanner is written to stdout  but  its
-          #line directives (see the -L option above) refer to the
-          file output.
-
-     -Pprefix
-
-
-
-Version 2.5          Last change: April 1995                   35
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-          changes the default yy prefix  used  by  flex  for  all
-          globally-visible variable and function names to instead
-          be prefix. For  example,  -Pfoo  changes  the  name  of
-          yytext  to  footext.  It  also  changes the name of the
-          default output file from lex.yy.c  to  lex.foo.c.  Here
-          are all of the names affected:
-
-              yy_create_buffer
-              yy_delete_buffer
-              yy_flex_debug
-              yy_init_buffer
-              yy_flush_buffer
-              yy_load_buffer_state
-              yy_switch_to_buffer
-              yyin
-              yyleng
-              yylex
-              yylineno
-              yyout
-              yyrestart
-              yytext
-              yywrap
-
-          (If you are using a C++ scanner, then only  yywrap  and
-          yyFlexLexer  are affected.) Within your scanner itself,
-          you can still refer to the global variables  and  func-
-          tions  using  either  version of their name; but exter-
-          nally, they have the modified name.
-
-          This option lets you easily link together multiple flex
-          programs  into the same executable.  Note, though, that
-          using this option also renames  yywrap(),  so  you  now
-          must either provide your own (appropriately-named) ver-
-          sion of the routine for your scanner,  or  use  %option
-          noyywrap,  as  linking with -lfl no longer provides one
-          for you by default.
-
-     -Sskeleton_file
-          overrides the default skeleton  file  from  which  flex
-          constructs its scanners.  You'll never need this option
-          unless you are doing flex maintenance or development.
-
-     flex also  provides  a  mechanism  for  controlling  options
-     within  the  scanner  specification itself, rather than from
-     the flex command-line.  This is done  by  including  %option
-     directives  in  the  first section of the scanner specifica-
-     tion.  You  can  specify  multiple  options  with  a  single
-     %option directive, and multiple directives in the first sec-
-     tion of your flex input file.
-
-     Most options are given simply as names, optionally  preceded
-     by  the word "no" (with no intervening whitespace) to negate
-
-
-
-Version 2.5          Last change: April 1995                   36
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     their meaning.  A number are equivalent  to  flex  flags  or
-     their negation:
-
-         7bit            -7 option
-         8bit            -8 option
-         align           -Ca option
-         backup          -b option
-         batch           -B option
-         c++             -+ option
-
-         caseful or
-         case-sensitive  opposite of -i (default)
-
-         case-insensitive or
-         caseless        -i option
-
-         debug           -d option
-         default         opposite of -s option
-         ecs             -Ce option
-         fast            -F option
-         full            -f option
-         interactive     -I option
-         lex-compat      -l option
-         meta-ecs        -Cm option
-         perf-report     -p option
-         read            -Cr option
-         stdout          -t option
-         verbose         -v option
-         warn            opposite of -w option
-                         (use "%option nowarn" for -w)
-
-         array           equivalent to "%array"
-         pointer         equivalent to "%pointer" (default)
-
-     Some %option's provide features otherwise not available:
-
-     always-interactive
-          instructs flex to generate a scanner which always  con-
-          siders  its input "interactive".  Normally, on each new
-          input file the scanner calls isatty() in an attempt  to
-          determine   whether   the  scanner's  input  source  is
-          interactive and thus should be read a  character  at  a
-          time.   When this option is used, however, then no such
-          call is made.
-
-     main directs flex to provide a default  main()  program  for
-          the  scanner,  which  simply calls yylex(). This option
-          implies noyywrap (see below).
-
-     never-interactive
-          instructs flex to generate a scanner which  never  con-
-          siders  its input "interactive" (again, no call made to
-
-
-
-Version 2.5          Last change: April 1995                   37
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-          isatty()). This is the opposite of always-interactive.
-
-     stack
-          enables the use of start condition  stacks  (see  Start
-          Conditions above).
-
-     stdinit
-          if set (i.e., %option  stdinit)  initializes  yyin  and
-          yyout  to  stdin  and stdout, instead of the default of
-          nil.  Some  existing  lex  programs  depend   on   this
-          behavior,  even though it is not compliant with ANSI C,
-          which does not require stdin and stdout to be  compile-
-          time constant.
-
-     yylineno
-          directs flex to generate a scanner that  maintains  the
-          number  of  the current line read from its input in the
-          global variable yylineno. This  option  is  implied  by
-          %option lex-compat.
-
-     yywrap
-          if unset (i.e., %option noyywrap),  makes  the  scanner
-          not  call  yywrap()  upon  an  end-of-file,  but simply
-          assume that there are no more files to scan (until  the
-          user  points  yyin  at  a  new  file  and calls yylex()
-          again).
-
-     flex scans your rule actions to determine  whether  you  use
-     the  REJECT  or  yymore()  features.   The reject and yymore
-     options are available to override its decision as to whether
-     you  use  the options, either by setting them (e.g., %option
-     reject) to indicate the feature is indeed used, or unsetting
-     them  to  indicate  it  actually  is not used (e.g., %option
-     noyymore).
-
-     Three options take string-delimited values, offset with '=':
-
-         %option outfile="ABC"
-
-     is equivalent to -oABC, and
-
-         %option prefix="XYZ"
-
-     is equivalent to -PXYZ. Finally,
-
-         %option yyclass="foo"
-
-     only applies when generating a C++ scanner ( -+ option).  It
-     informs  flex  that  you  have  derived foo as a subclass of
-     yyFlexLexer, so flex will place your actions in  the  member
-     function  foo::yylex()  instead  of yyFlexLexer::yylex(). It
-     also generates a yyFlexLexer::yylex() member  function  that
-
-
-
-Version 2.5          Last change: April 1995                   38
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     emits      a      run-time      error      (by      invoking
-     yyFlexLexer::LexerError()) if called.   See  Generating  C++
-     Scanners, below, for additional information.
-
-     A number of options are available for lint purists who  want
-     to  suppress the appearance of unneeded routines in the gen-
-     erated scanner.  Each of  the  following,  if  unset  (e.g.,
-     %option  nounput ), results in the corresponding routine not
-     appearing in the generated scanner:
-
-         input, unput
-         yy_push_state, yy_pop_state, yy_top_state
-         yy_scan_buffer, yy_scan_bytes, yy_scan_string
-
-     (though yy_push_state()  and  friends  won't  appear  anyway
-     unless you use %option stack).
-
-PERFORMANCE CONSIDERATIONS
-     The main design goal of  flex  is  that  it  generate  high-
-     performance  scanners.   It  has  been optimized for dealing
-     well with large sets of rules.  Aside from  the  effects  on
-     scanner  speed  of the table compression -C options outlined
-     above, there are a number of options/actions  which  degrade
-     performance.  These are, from most expensive to least:
-
-         REJECT
-         %option yylineno
-         arbitrary trailing context
-
-         pattern sets that require backing up
-         %array
-         %option interactive
-         %option always-interactive
-
-         '^' beginning-of-line operator
-         yymore()
-
-     with the first three all being quite expensive and the  last
-     two  being  quite  cheap.   Note also that unput() is imple-
-     mented as a routine call that potentially does quite  a  bit
-     of  work,  while yyless() is a quite-cheap macro; so if just
-     putting back some excess text you scanned, use yyless().
-
-     REJECT should be avoided at all costs  when  performance  is
-     important.  It is a particularly expensive option.
-
-     Getting rid of backing up is messy and often may be an enor-
-     mous  amount  of work for a complicated scanner.  In princi-
-     pal,  one  begins  by  using  the  -b  flag  to  generate  a
-     lex.backup file.  For example, on the input
-
-         %%
-
-
-
-Version 2.5          Last change: April 1995                   39
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         foo        return TOK_KEYWORD;
-         foobar     return TOK_KEYWORD;
-
-     the file looks like:
-
-         State #6 is non-accepting -
-          associated rule line numbers:
-                2       3
-          out-transitions: [ o ]
-          jam-transitions: EOF [ \001-n  p-\177 ]
-
-         State #8 is non-accepting -
-          associated rule line numbers:
-                3
-          out-transitions: [ a ]
-          jam-transitions: EOF [ \001-`  b-\177 ]
-
-         State #9 is non-accepting -
-          associated rule line numbers:
-                3
-          out-transitions: [ r ]
-          jam-transitions: EOF [ \001-q  s-\177 ]
-
-         Compressed tables always back up.
-
-     The first few lines tell us that there's a scanner state  in
-     which  it  can  make  a  transition on an 'o' but not on any
-     other character,  and  that  in  that  state  the  currently
-     scanned text does not match any rule.  The state occurs when
-     trying to match the rules found at lines  2  and  3  in  the
-     input  file.  If the scanner is in that state and then reads
-     something other than an 'o', it will have to back up to find
-     a  rule  which is matched.  With a bit of headscratching one
-     can see that this must be the state it's in when it has seen
-     "fo".   When  this  has  happened,  if  anything  other than
-     another 'o' is seen, the scanner will have  to  back  up  to
-     simply match the 'f' (by the default rule).
-
-     The comment regarding State #8 indicates there's  a  problem
-     when  "foob"  has  been  scanned.   Indeed, on any character
-     other than an 'a', the scanner  will  have  to  back  up  to
-     accept  "foo".  Similarly, the comment for State #9 concerns
-     when "fooba" has been scanned and an 'r' does not follow.
-
-     The final comment reminds us that there's no point going  to
-     all the trouble of removing backing up from the rules unless
-     we're using -Cf or -CF, since there's  no  performance  gain
-     doing so with compressed scanners.
-
-     The way to remove the backing up is to add "error" rules:
-
-         %%
-
-
-
-Version 2.5          Last change: April 1995                   40
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         foo         return TOK_KEYWORD;
-         foobar      return TOK_KEYWORD;
-
-         fooba       |
-         foob        |
-         fo          {
-                     /* false alarm, not really a keyword */
-                     return TOK_ID;
-                     }
-
-
-     Eliminating backing up among a list of keywords can also  be
-     done using a "catch-all" rule:
-
-         %%
-         foo         return TOK_KEYWORD;
-         foobar      return TOK_KEYWORD;
-
-         [a-z]+      return TOK_ID;
-
-     This is usually the best solution when appropriate.
-
-     Backing up messages tend to cascade.  With a complicated set
-     of  rules it's not uncommon to get hundreds of messages.  If
-     one can decipher them, though, it often only takes  a  dozen
-     or so rules to eliminate the backing up (though it's easy to
-     make a mistake and have an error rule accidentally  match  a
-     valid  token.   A  possible  future  flex feature will be to
-     automatically add rules to eliminate backing up).
-
-     It's important to keep in mind that you gain the benefits of
-     eliminating  backing up only if you eliminate every instance
-     of backing up.  Leaving just one means you gain nothing.
-
-     Variable trailing context (where both the leading and trail-
-     ing  parts  do  not  have a fixed length) entails almost the
-     same performance loss as  REJECT  (i.e.,  substantial).   So
-     when possible a rule like:
-
-         %%
-         mouse|rat/(cat|dog)   run();
-
-     is better written:
-
-         %%
-         mouse/cat|dog         run();
-         rat/cat|dog           run();
-
-     or as
-
-         %%
-         mouse|rat/cat         run();
-
-
-
-Version 2.5          Last change: April 1995                   41
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-         mouse|rat/dog         run();
-
-     Note that here the special '|' action does not  provide  any
-     savings,  and can even make things worse (see Deficiencies /
-     Bugs below).
-
-     Another area where the user can increase a scanner's perfor-
-     mance  (and  one that's easier to implement) arises from the
-     fact that the longer the  tokens  matched,  the  faster  the
-     scanner will run.  This is because with long tokens the pro-
-     cessing of most input characters takes place in the  (short)
-     inner  scanning  loop, and does not often have to go through
-     the additional work of setting up the  scanning  environment
-     (e.g.,  yytext)  for  the  action.  Recall the scanner for C
-     comments:
-
-         %x comment
-         %%
-                 int line_num = 1;
-
-         "/*"         BEGIN(comment);
-
-         <comment>[^*\n]*
-         <comment>"*"+[^*/\n]*
-         <comment>\n             ++line_num;
-         <comment>"*"+"/"        BEGIN(INITIAL);
-
-     This could be sped up by writing it as:
-
-         %x comment
-         %%
-                 int line_num = 1;
-
-         "/*"         BEGIN(comment);
-
-         <comment>[^*\n]*
-         <comment>[^*\n]*\n      ++line_num;
-         <comment>"*"+[^*/\n]*
-         <comment>"*"+[^*/\n]*\n ++line_num;
-         <comment>"*"+"/"        BEGIN(INITIAL);
-
-     Now instead of each  newline  requiring  the  processing  of
-     another  action,  recognizing  the newlines is "distributed"
-     over the other rules to keep the matched  text  as  long  as
-     possible.   Note  that  adding  rules does not slow down the
-     scanner!  The speed of the scanner  is  independent  of  the
-     number  of  rules or (modulo the considerations given at the
-     beginning of this section) how  complicated  the  rules  are
-     with regard to operators such as '*' and '|'.
-
-     A final example in speeding up a scanner: suppose  you  want
-     to  scan through a file containing identifiers and keywords,
-
-
-
-Version 2.5          Last change: April 1995                   42
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     one per line and with no other  extraneous  characters,  and
-     recognize all the keywords.  A natural first approach is:
-
-         %%
-         asm      |
-         auto     |
-         break    |
-         ... etc ...
-         volatile |
-         while    /* it's a keyword */
-
-         .|\n     /* it's not a keyword */
-
-     To eliminate the back-tracking, introduce a catch-all rule:
-
-         %%
-         asm      |
-         auto     |
-         break    |
-         ... etc ...
-         volatile |
-         while    /* it's a keyword */
-
-         [a-z]+   |
-         .|\n     /* it's not a keyword */
-
-     Now, if it's guaranteed that there's exactly  one  word  per
-     line,  then  we  can reduce the total number of matches by a
-     half by merging in the recognition of newlines with that  of
-     the other tokens:
-
-         %%
-         asm\n    |
-         auto\n   |
-         break\n  |
-         ... etc ...
-         volatile\n |
-         while\n  /* it's a keyword */
-
-         [a-z]+\n |
-         .|\n     /* it's not a keyword */
-
-     One has to be careful here,  as  we  have  now  reintroduced
-     backing  up  into the scanner.  In particular, while we know
-     that there will never be any characters in the input  stream
-     other  than letters or newlines, flex can't figure this out,
-     and it will plan for possibly needing to back up when it has
-     scanned  a  token like "auto" and then the next character is
-     something other than a newline or a letter.   Previously  it
-     would  then  just match the "auto" rule and be done, but now
-     it has no "auto" rule, only a "auto\n" rule.   To  eliminate
-     the possibility of backing up, we could either duplicate all
-
-
-
-Version 2.5          Last change: April 1995                   43
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     rules but without final newlines, or, since we never  expect
-     to  encounter  such  an  input  and therefore don't how it's
-     classified, we can introduce one more catch-all  rule,  this
-     one which doesn't include a newline:
-
-         %%
-         asm\n    |
-         auto\n   |
-         break\n  |
-         ... etc ...
-         volatile\n |
-         while\n  /* it's a keyword */
-
-         [a-z]+\n |
-         [a-z]+   |
-         .|\n     /* it's not a keyword */
-
-     Compiled with -Cf, this is about as fast as one  can  get  a
-     flex scanner to go for this particular problem.
-
-     A final note: flex is slow when matching NUL's, particularly
-     when  a  token  contains multiple NUL's.  It's best to write
-     rules which match short amounts of text if it's  anticipated
-     that the text will often include NUL's.
-
-     Another final note regarding performance: as mentioned above
-     in  the section How the Input is Matched, dynamically resiz-
-     ing yytext to accommodate huge  tokens  is  a  slow  process
-     because  it presently requires that the (huge) token be res-
-     canned from the beginning.  Thus if  performance  is  vital,
-     you  should  attempt to match "large" quantities of text but
-     not "huge" quantities, where the cutoff between the  two  is
-     at about 8K characters/token.
-
-GENERATING C++ SCANNERS
-     flex provides two different ways to  generate  scanners  for
-     use  with C++.  The first way is to simply compile a scanner
-     generated by flex using a C++ compiler instead of a  C  com-
-     piler.   You  should  not  encounter any compilations errors
-     (please report any you find to the email  address  given  in
-     the  Author  section  below).   You can then use C++ code in
-     your rule actions instead of C code.  Note that the  default
-     input  source  for  your  scanner  remains yyin, and default
-     echoing is still done to yyout. Both of these remain FILE  *
-     variables and not C++ streams.
-
-     You can also use flex to generate a C++ scanner class, using
-     the  -+  option  (or,  equivalently,  %option c++), which is
-     automatically specified if the name of the  flex  executable
-     ends  in a '+', such as flex++. When using this option, flex
-     defaults to generating the scanner  to  the  file  lex.yy.cc
-     instead  of  lex.yy.c.  The  generated  scanner includes the
-
-
-
-Version 2.5          Last change: April 1995                   44
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     header file FlexLexer.h, which defines the interface to  two
-     C++ classes.
-
-     The first class, FlexLexer, provides an abstract base  class
-     defining  the  general scanner class interface.  It provides
-     the following member functions:
-
-     const char* YYText()
-          returns the text of the most  recently  matched  token,
-          the equivalent of yytext.
-
-     int YYLeng()
-          returns the length of the most recently matched  token,
-          the equivalent of yyleng.
-
-     int lineno() const
-          returns the current  input  line  number  (see  %option
-          yylineno), or 1 if %option yylineno was not used.
-
-     void set_debug( int flag )
-          sets the debugging flag for the scanner, equivalent  to
-          assigning  to  yy_flex_debug  (see  the Options section
-          above).  Note that you must  build  the  scanner  using
-          %option debug to include debugging information in it.
-
-     int debug() const
-          returns the current setting of the debugging flag.
-
-     Also   provided   are   member   functions   equivalent   to
-     yy_switch_to_buffer(),  yy_create_buffer() (though the first
-     argument is an istream* object pointer  and  not  a  FILE*),
-     yy_flush_buffer(),   yy_delete_buffer(),   and   yyrestart()
-     (again, the first argument is a istream* object pointer).
-
-     The second class  defined  in  FlexLexer.h  is  yyFlexLexer,
-     which  is  derived  from FlexLexer. It defines the following
-     additional member functions:
-
-     yyFlexLexer( istream* arg_yyin = 0, ostream* arg_yyout = 0 )
-          constructs a yyFlexLexer object using the given streams
-          for  input  and  output.  If not specified, the streams
-          default to cin and cout, respectively.
-
-     virtual int yylex()
-          performs the same role is  yylex()  does  for  ordinary
-          flex  scanners:  it  scans  the input stream, consuming
-          tokens, until a rule's action returns a value.  If  you
-          derive a subclass S from yyFlexLexer and want to access
-          the member functions and variables of S inside yylex(),
-          then you need to use %option yyclass="S" to inform flex
-          that you will be using that subclass instead of yyFlex-
-          Lexer.   In   this   case,   rather   than   generating
-
-
-
-Version 2.5          Last change: April 1995                   45
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-          yyFlexLexer::yylex(), flex  generates  S::yylex()  (and
-          also  generates a dummy yyFlexLexer::yylex() that calls
-          yyFlexLexer::LexerError() if called).
-
-     virtual void switch_streams(istream* new_in = 0,
-          ostream* new_out = 0)  reassigns  yyin  to  new_in  (if
-          non-nil)  and  yyout  to  new_out (ditto), deleting the
-          previous input buffer if yyin is reassigned.
-
-     int yylex( istream* new_in, ostream* new_out = 0 )
-          first switches the input  streams  via  switch_streams(
-          new_in,  new_out  )  and  then  returns  the  value  of
-          yylex().
-
-     In addition, yyFlexLexer  defines  the  following  protected
-     virtual  functions which you can redefine in derived classes
-     to tailor the scanner:
-
-     virtual int LexerInput( char* buf, int max_size )
-          reads up to max_size characters into  buf  and  returns
-          the  number  of  characters  read.  To indicate end-of-
-          input, return 0 characters.   Note  that  "interactive"
-          scanners  (see  the  -B  and -I flags) define the macro
-          YY_INTERACTIVE. If you redefine LexerInput()  and  need
-          to  take  different actions depending on whether or not
-          the scanner might  be  scanning  an  interactive  input
-          source,  you can test for the presence of this name via
-          #ifdef.
-
-     virtual void LexerOutput( const char* buf, int size )
-          writes out size characters from the buffer buf,  which,
-          while NUL-terminated, may also contain "internal" NUL's
-          if the scanner's rules can match  text  with  NUL's  in
-          them.
-
-     virtual void LexerError( const char* msg )
-          reports a fatal error message.  The default version  of
-          this function writes the message to the stream cerr and
-          exits.
-
-     Note that a yyFlexLexer object contains its entire  scanning
-     state.   Thus  you  can use such objects to create reentrant
-     scanners.  You can instantiate  multiple  instances  of  the
-     same  yyFlexLexer  class,  and you can also combine multiple
-     C++ scanner classes together in the same program  using  the
-     -P option discussed above.
-
-     Finally, note that the %array feature is  not  available  to
-     C++ scanner classes; you must use %pointer (the default).
-
-     Here is an example of a simple C++ scanner:
-
-
-
-
-Version 2.5          Last change: April 1995                   46
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-             // An example of using the flex C++ scanner class.
-
-         %{
-         int mylineno = 0;
-         %}
-
-         string  \"[^\n"]+\"
-
-         ws      [ \t]+
-
-         alpha   [A-Za-z]
-         dig     [0-9]
-         name    ({alpha}|{dig}|\$)({alpha}|{dig}|[_.\-/$])*
-         num1    [-+]?{dig}+\.?([eE][-+]?{dig}+)?
-         num2    [-+]?{dig}*\.{dig}+([eE][-+]?{dig}+)?
-         number  {num1}|{num2}
-
-         %%
-
-         {ws}    /* skip blanks and tabs */
-
-         "/*"    {
-                 int c;
-
-                 while((c = yyinput()) != 0)
-                     {
-                     if(c == '\n')
-                         ++mylineno;
-
-                     else if(c == '*')
-                         {
-                         if((c = yyinput()) == '/')
-                             break;
-                         else
-                             unput(c);
-                         }
-                     }
-                 }
-
-         {number}  cout << "number " << YYText() << '\n';
-
-         \n        mylineno++;
-
-         {name}    cout << "name " << YYText() << '\n';
-
-         {string}  cout << "string " << YYText() << '\n';
-
-         %%
-
-         int main( int /* argc */, char** /* argv */ )
-             {
-             FlexLexer* lexer = new yyFlexLexer;
-
-
-
-Version 2.5          Last change: April 1995                   47
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-             while(lexer->yylex() != 0)
-                 ;
-             return 0;
-             }
-     If you want to create multiple  (different)  lexer  classes,
-     you  use  the -P flag (or the prefix= option) to rename each
-     yyFlexLexer to some other xxFlexLexer. You then can  include
-     <FlexLexer.h>  in  your  other sources once per lexer class,
-     first renaming yyFlexLexer as follows:
-
-         #undef yyFlexLexer
-         #define yyFlexLexer xxFlexLexer
-         #include <FlexLexer.h>
-
-         #undef yyFlexLexer
-         #define yyFlexLexer zzFlexLexer
-         #include <FlexLexer.h>
-
-     if, for example, you used %option  prefix="xx"  for  one  of
-     your scanners and %option prefix="zz" for the other.
-
-     IMPORTANT: the present form of the scanning class is experi-
-     mental and may change considerably between major releases.
-
-INCOMPATIBILITIES WITH LEX AND POSIX
-     flex is a rewrite of the AT&T Unix lex tool (the two  imple-
-     mentations  do not share any code, though), with some exten-
-     sions and incompatibilities, both of which are of concern to
-     those who wish to write scanners acceptable to either imple-
-     mentation.  Flex is  fully  compliant  with  the  POSIX  lex
-     specification,   except   that   when  using  %pointer  (the
-     default), a call to unput() destroys the contents of yytext,
-     which is counter to the POSIX specification.
-
-     In this section we discuss all of the known areas of  incom-
-     patibility  between flex, AT&T lex, and the POSIX specifica-
-     tion.
-
-     flex's -l option turns on  maximum  compatibility  with  the
-     original  AT&T  lex  implementation,  at the cost of a major
-     loss in the generated scanner's performance.  We note  below
-     which incompatibilities can be overcome using the -l option.
-
-     flex is fully compatible with lex with the following  excep-
-     tions:
-
-     -    The undocumented lex scanner internal variable yylineno
-          is not supported unless -l or %option yylineno is used.
-
-          yylineno should be maintained on  a  per-buffer  basis,
-          rather  than  a  per-scanner  (single  global variable)
-          basis.
-
-
-
-Version 2.5          Last change: April 1995                   48
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-          yylineno is not part of the POSIX specification.
-
-     -    The input() routine is not redefinable, though  it  may
-          be  called  to  read  characters following whatever has
-          been matched by a rule.  If input() encounters an  end-
-          of-file  the  normal  yywrap()  processing  is done.  A
-          ``real'' end-of-file is returned by input() as EOF.
-
-          Input is instead controlled by  defining  the  YY_INPUT
-          macro.
-
-          The flex restriction that input() cannot  be  redefined
-          is  in  accordance  with the POSIX specification, which
-          simply does not specify  any  way  of  controlling  the
-          scanner's input other than by making an initial assign-
-          ment to yyin.
-
-     -    The unput() routine is not redefinable.  This  restric-
-          tion is in accordance with POSIX.
-
-     -    flex scanners are not as reentrant as lex scanners.  In
-          particular,  if  you have an interactive scanner and an
-          interrupt handler which long-jumps out of the  scanner,
-          and  the  scanner is subsequently called again, you may
-          get the following message:
-
-              fatal flex scanner internal error--end of buffer missed
-
-          To reenter the scanner, first use
-
-              yyrestart( yyin );
-
-          Note that this call will throw away any buffered input;
-          usually  this  isn't  a  problem  with  an  interactive
-          scanner.
-
-          Also note that flex C++ scanner classes are  reentrant,
-          so  if  using  C++ is an option for you, you should use
-          them instead.  See "Generating C++ Scanners" above  for
-          details.
-
-     -    output() is not supported.  Output from the ECHO  macro
-          is done to the file-pointer yyout (default stdout).
-
-          output() is not part of the POSIX specification.
-
-     -    lex does not support exclusive start  conditions  (%x),
-          though they are in the POSIX specification.
-
-     -    When definitions are expanded, flex  encloses  them  in
-          parentheses.  With lex, the following:
-
-
-
-
-Version 2.5          Last change: April 1995                   49
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-              NAME    [A-Z][A-Z0-9]*
-              %%
-              foo{NAME}?      printf( "Found it\n" );
-              %%
-
-          will not match the string "foo" because when the  macro
-          is  expanded  the rule is equivalent to "foo[A-Z][A-Z0-
-          9]*?" and the precedence is such that the '?' is  asso-
-          ciated  with  "[A-Z0-9]*".  With flex, the rule will be
-          expanded to "foo([A-Z][A-Z0-9]*)?" and  so  the  string
-          "foo" will match.
-
-          Note that if the definition begins with ^ or ends  with
-          $  then  it  is not expanded with parentheses, to allow
-          these operators to appear in definitions without losing
-          their  special  meanings.   But the <s>, /, and <<EOF>>
-          operators cannot be used in a flex definition.
-
-          Using -l results in the lex behavior of no  parentheses
-          around the definition.
-
-          The POSIX  specification  is  that  the  definition  be
-          enclosed in parentheses.
-
-     -    Some implementations of lex allow a  rule's  action  to
-          begin  on  a  separate  line, if the rule's pattern has
-          trailing whitespace:
-
-              %%
-              foo|bar<space here>
-                { foobar_action(); }
-
-          flex does not support this feature.
-
-     -    The lex %r (generate a Ratfor scanner)  option  is  not
-          supported.  It is not part of the POSIX specification.
-
-     -    After a call to unput(), yytext is undefined until  the
-          next  token  is  matched,  unless the scanner was built
-          using %array. This is not the  case  with  lex  or  the
-          POSIX specification.  The -l option does away with this
-          incompatibility.
-
-     -    The precedence of the {} (numeric  range)  operator  is
-          different.   lex  interprets  "abc{1,3}" as "match one,
-          two, or  three  occurrences  of  'abc'",  whereas  flex
-          interprets  it  as "match 'ab' followed by one, two, or
-          three occurrences of 'c'".  The latter is in  agreement
-          with the POSIX specification.
-
-     -    The precedence of the ^  operator  is  different.   lex
-          interprets  "^foo|bar"  as  "match  either 'foo' at the
-
-
-
-Version 2.5          Last change: April 1995                   50
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-          beginning of a line, or 'bar' anywhere",  whereas  flex
-          interprets  it  as "match either 'foo' or 'bar' if they
-          come at the beginning of a line".   The  latter  is  in
-          agreement with the POSIX specification.
-
-     -    The special table-size declarations  such  as  %a  sup-
-          ported  by  lex are not required by flex scanners; flex
-          ignores them.
-
-     -    The name FLEX_SCANNER is #define'd so scanners  may  be
-          written  for use with either flex or lex. Scanners also
-          include YY_FLEX_MAJOR_VERSION and YY_FLEX_MINOR_VERSION
-          indicating  which version of flex generated the scanner
-          (for example, for the 2.5 release, these defines  would
-          be 2 and 5 respectively).
-
-     The following flex features are not included in lex  or  the
-     POSIX specification:
-
-         C++ scanners
-         %option
-         start condition scopes
-         start condition stacks
-         interactive/non-interactive scanners
-         yy_scan_string() and friends
-         yyterminate()
-         yy_set_interactive()
-         yy_set_bol()
-         YY_AT_BOL()
-         <<EOF>>
-         <*>
-         YY_DECL
-         YY_START
-         YY_USER_ACTION
-         YY_USER_INIT
-         #line directives
-         %{}'s around actions
-         multiple actions on a line
-
-     plus almost all of the flex flags.  The last feature in  the
-     list  refers to the fact that with flex you can put multiple
-     actions on the same line, separated with semi-colons,  while
-     with lex, the following
-
-         foo    handle_foo(); ++num_foos_seen;
-
-     is (rather surprisingly) truncated to
-
-         foo    handle_foo();
-
-     flex does not truncate the action.   Actions  that  are  not
-     enclosed  in  braces are simply terminated at the end of the
-
-
-
-Version 2.5          Last change: April 1995                   51
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     line.
-
-DIAGNOSTICS
-     warning, rule cannot be matched  indicates  that  the  given
-     rule  cannot  be matched because it follows other rules that
-     will always match the same text as it.  For example, in  the
-     following  "foo" cannot be matched because it comes after an
-     identifier "catch-all" rule:
-
-         [a-z]+    got_identifier();
-         foo       got_foo();
-
-     Using REJECT in a scanner suppresses this warning.
-
-     warning, -s option given but default  rule  can  be  matched
-     means  that  it  is  possible  (perhaps only in a particular
-     start condition) that the default  rule  (match  any  single
-     character)  is  the  only  one  that will match a particular
-     input.  Since -s was given, presumably this is not intended.
-
-     reject_used_but_not_detected          undefined           or
-     yymore_used_but_not_detected  undefined  -  These errors can
-     occur at compile time.  They indicate that the scanner  uses
-     REJECT  or yymore() but that flex failed to notice the fact,
-     meaning that flex scanned the first two sections looking for
-     occurrences  of  these  actions  and failed to find any, but
-     somehow you snuck some in (via a #include  file,  for  exam-
-     ple).   Use  %option reject or %option yymore to indicate to
-     flex that you really do use these features.
-
-     flex scanner jammed - a scanner compiled with -s has encoun-
-     tered  an  input  string  which wasn't matched by any of its
-     rules.  This error can also occur due to internal problems.
-
-     token too large, exceeds YYLMAX - your scanner  uses  %array
-     and one of its rules matched a string longer than the YYLMAX
-     constant (8K bytes by default).  You can increase the  value
-     by  #define'ing  YYLMAX  in  the definitions section of your
-     flex input.
-
-     scanner requires -8 flag to use the  character  'x'  -  Your
-     scanner specification includes recognizing the 8-bit charac-
-     ter 'x' and you did  not  specify  the  -8  flag,  and  your
-     scanner  defaulted  to 7-bit because you used the -Cf or -CF
-     table compression options.  See the  discussion  of  the  -7
-     flag for details.
-
-     flex scanner push-back overflow - you used unput()  to  push
-     back  so  much text that the scanner's buffer could not hold
-     both the pushed-back text and the current token  in  yytext.
-     Ideally  the scanner should dynamically resize the buffer in
-     this case, but at present it does not.
-
-
-
-Version 2.5          Last change: April 1995                   52
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     input buffer overflow, can't enlarge buffer because  scanner
-     uses  REJECT  -  the  scanner  was  working  on  matching an
-     extremely large token and needed to expand the input buffer.
-     This doesn't work with scanners that use REJECT.
-
-     fatal flex scanner internal error--end of  buffer  missed  -
-     This  can  occur  in  an  scanner which is reentered after a
-     long-jump has jumped out (or over) the scanner's  activation
-     frame.  Before reentering the scanner, use:
-
-         yyrestart( yyin );
-
-     or, as noted above, switch to using the C++ scanner class.
-
-     too many start conditions in <> you listed more start condi-
-     tions  in a <> construct than exist (so you must have listed
-     at least one of them twice).
-
-FILES
-     -lfl library with which scanners must be linked.
-
-     lex.yy.c
-          generated scanner (called lexyy.c on some systems).
-
-     lex.yy.cc
-          generated C++ scanner class, when using -+.
-
-     <FlexLexer.h>
-          header file defining the C++ scanner base class,  Flex-
-          Lexer, and its derived class, yyFlexLexer.
-
-     flex.skl
-          skeleton scanner.  This file is only used when building
-          flex, not when flex executes.
-
-     lex.backup
-          backing-up information for -b flag (called  lex.bck  on
-          some systems).
-
-DEFICIENCIES / BUGS
-     Some trailing context patterns cannot  be  properly  matched
-     and  generate  warning  messages  ("dangerous  trailing con-
-     text").  These are patterns where the ending  of  the  first
-     part  of  the rule matches the beginning of the second part,
-     such as "zx*/xy*", where the 'x*' matches  the  'x'  at  the
-     beginning  of  the  trailing  context.  (Note that the POSIX
-     draft states that the text matched by such patterns is unde-
-     fined.)
-
-     For some trailing context rules, parts  which  are  actually
-     fixed-length  are  not  recognized  as  such, leading to the
-     abovementioned performance loss.  In particular, parts using
-
-
-
-Version 2.5          Last change: April 1995                   53
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     '|'   or  {n}  (such  as  "foo{3}")  are  always  considered
-     variable-length.
-
-     Combining trailing context with the special '|'  action  can
-     result  in fixed trailing context being turned into the more
-     expensive variable trailing context.  For  example,  in  the
-     following:
-
-         %%
-         abc      |
-         xyz/def
-
-
-     Use of unput() invalidates yytext  and  yyleng,  unless  the
-     %array directive or the -l option has been used.
-
-     Pattern-matching  of  NUL's  is  substantially  slower  than
-     matching other characters.
-
-     Dynamic resizing of the input buffer is slow, as it  entails
-     rescanning  all the text matched so far by the current (gen-
-     erally huge) token.
-
-     Due to both buffering of input and  read-ahead,  you  cannot
-     intermix  calls to <stdio.h> routines, such as, for example,
-     getchar(), with flex rules and  expect  it  to  work.   Call
-     input() instead.
-
-     The total table entries listed by the -v flag  excludes  the
-     number  of  table  entries needed to determine what rule has
-     been matched.  The number of entries is equal to the  number
-     of  DFA states if the scanner does not use REJECT, and some-
-     what greater than the number of states if it does.
-
-     REJECT cannot be used with the -f or -F options.
-
-     The flex internal algorithms need documentation.
-
-SEE ALSO
-     lex(1), yacc(1), sed(1), awk(1).
-
-     John Levine,  Tony  Mason,  and  Doug  Brown,  Lex  &  Yacc,
-     O'Reilly and Associates.  Be sure to get the 2nd edition.
-
-     M. E. Lesk and E. Schmidt, LEX - Lexical Analyzer Generator
-
-     Alfred Aho, Ravi Sethi and Jeffrey Ullman, Compilers:  Prin-
-     ciples,   Techniques   and   Tools,  Addison-Wesley  (1986).
-     Describes  the  pattern-matching  techniques  used  by  flex
-     (deterministic finite automata).
-
-
-
-
-
-Version 2.5          Last change: April 1995                   54
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-AUTHOR
-     Vern Paxson, with the help of many ideas and  much  inspira-
-     tion  from Van Jacobson.  Original version by Jef Poskanzer.
-     The fast table representation is a partial implementation of
-     a  design done by Van Jacobson.  The implementation was done
-     by Kevin Gong and Vern Paxson.
-
-     Thanks to the many flex beta-testers, feedbackers, and  con-
-     tributors,  especially Francois Pinard, Casey Leedom, Robert
-     Abramovitz,  Stan  Adermann,  Terry  Allen,  David   Barker-
-     Plummer,  John  Basrai,  Neal  Becker,  Nelson  H.F.  Beebe,
-     benson@odi.com, Karl Berry, Peter A. Bigot, Simon Blanchard,
-     Keith  Bostic,  Frederic Brehm, Ian Brockbank, Kin Cho, Nick
-     Christopher, Brian Clapper, J.T.  Conklin,  Jason  Coughlin,
-     Bill  Cox,  Nick  Cropper, Dave Curtis, Scott David Daniels,
-     Chris  G.  Demetriou,  Theo  Deraadt,  Mike  Donahue,  Chuck
-     Doucette,  Tom  Epperly,  Leo  Eskin,  Chris  Faylor,  Chris
-     Flatters, Jon Forrest, Jeffrey Friedl, Joe Gayda,  Kaveh  R.
-     Ghazi,  Wolfgang  Glunz, Eric Goldman, Christopher M. Gould,
-     Ulrich Grepel, Peer Griebel, Jan  Hajic,  Charles  Hemphill,
-     NORO  Hideo,  Jarkko  Hietaniemi, Scott Hofmann, Jeff Honig,
-     Dana Hudes, Eric Hughes,  John  Interrante,  Ceriel  Jacobs,
-     Michal Jaegermann, Sakari Jalovaara, Jeffrey R. Jones, Henry
-     Juengst, Klaus Kaempf, Jonathan I. Kamens, Terrence O  Kane,
-     Amir  Katz, ken@ken.hilco.com, Kevin B. Kenny, Steve Kirsch,
-     Winfried Koenig, Marq  Kole,  Ronald  Lamprecht,  Greg  Lee,
-     Rohan  Lenard, Craig Leres, John Levine, Steve Liddle, David
-     Loffredo, Mike Long, Mohamed el Lozy, Brian  Madsen,  Malte,
-     Joe Marshall, Bengt Martensson, Chris Metcalf, Luke Mewburn,
-     Jim Meyering,  R.  Alexander  Milowski,  Erik  Naggum,  G.T.
-     Nicol,  Landon  Noll,  James  Nordby,  Marc  Nozell, Richard
-     Ohnemus, Karsten Pahnke, Sven Panne,  Roland  Pesch,  Walter
-     Pelissero,  Gaumond  Pierre, Esmond Pitt, Jef Poskanzer, Joe
-     Rahmeh, Jarmo Raiha, Frederic Raimbault,  Pat  Rankin,  Rick
-     Richardson,  Kevin  Rodgers,  Kai  Uwe  Rommel, Jim Roskind,
-     Alberto Santini,  Andreas  Scherer,  Darrell  Schiebel,  Raf
-     Schietekat,  Doug  Schmidt,  Philippe  Schnoebelen,  Andreas
-     Schwab, Larry Schwimmer, Alex Siegel, Eckehard  Stolz,  Jan-
-     Erik  Strvmquist, Mike Stump, Paul Stuart, Dave Tallman, Ian
-     Lance Taylor, Chris Thewalt, Richard M. Timoney, Jodi  Tsai,
-     Paul  Tuinenga,  Gary  Weik, Frank Whaley, Gerhard Wilhelms,
-     Kent Williams, Ken Yap,  Ron  Zellar,  Nathan  Zelle,  David
-     Zuhn,  and  those whose names have slipped my marginal mail-
-     archiving skills but whose contributions are appreciated all
-     the same.
-
-     Thanks to Keith Bostic, Jon  Forrest,  Noah  Friedman,  John
-     Gilmore, Craig Leres, John Levine, Bob Mulcahy, G.T.  Nicol,
-     Francois Pinard, Rich Salz, and Richard  Stallman  for  help
-     with various distribution headaches.
-
-
-
-
-
-Version 2.5          Last change: April 1995                   55
-
-
-
-
-
-
-FLEX(1)                  USER COMMANDS                    FLEX(1)
-
-
-
-     Thanks to Esmond Pitt and Earle Horton for  8-bit  character
-     support; to Benson Margulies and Fred Burke for C++ support;
-     to Kent Williams and Tom Epperly for C++ class  support;  to
-     Ove  Ewerlid  for  support  of NUL's; and to Eric Hughes for
-     support of multiple buffers.
-
-     This work was primarily done when I was with the  Real  Time
-     Systems  Group at the Lawrence Berkeley Laboratory in Berke-
-     ley, CA.  Many  thanks  to  all  there  for  the  support  I
-     received.
-
-     Send comments to vern@ee.lbl.gov.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Version 2.5          Last change: April 1995                   56
-
-
-
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/parse.c b/WebKitTools/android/flex-2.5.4a/MISC/parse.c
deleted file mode 100644
index fea9b91..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/parse.c
+++ /dev/null
@@ -1,1452 +0,0 @@
-#ifndef lint
-static char yysccsid[] = "@(#)yaccpar	1.9 (Berkeley) 02/21/93";
-#endif
-#define YYBYACC 1
-#define YYMAJOR 1
-#define YYMINOR 9
-#define yyclearin (yychar=(-1))
-#define yyerrok (yyerrflag=0)
-#define YYRECOVERING (yyerrflag!=0)
-#define YYPREFIX "yy"
-#line 10 "./parse.y"
-/*-
- * Copyright (c) 1990 The Regents of the University of California.
- * All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Vern Paxson.
- * 
- * The United States Government has rights in this work pursuant
- * to contract no. DE-AC03-76SF00098 between the United States
- * Department of Energy and the University of California.
- *
- * Redistribution and use in source and binary forms with or without
- * modification are permitted provided that: (1) source distributions retain
- * this entire copyright notice and comment, and (2) distributions including
- * binaries display the following acknowledgement:  ``This product includes
- * software developed by the University of California, Berkeley and its
- * contributors'' in the documentation or other materials provided with the
- * distribution and in all advertising materials mentioning features or use
- * of this software.  Neither the name of the University nor the names of
- * its contributors may be used to endorse or promote products derived from
- * this software without specific prior written permission.
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-/* $Header: /home/daffy/u0/vern/flex/RCS/parse.y,v 2.28 95/04/21 11:51:51 vern Exp $ */
-
-
-/* Some versions of bison are broken in that they use alloca() but don't
- * declare it properly.  The following is the patented (just kidding!)
- * #ifdef chud to fix the problem, courtesy of Francois Pinard.
- */
-#ifdef YYBISON
-/* AIX requires this to be the first thing in the file.  What a piece.  */
-# ifdef _AIX
- #pragma alloca
-# endif
-#endif
-
-#include "flexdef.h"
-
-/* The remainder of the alloca() cruft has to come after including flexdef.h,
- * so HAVE_ALLOCA_H is (possibly) defined.
- */
-#ifdef YYBISON
-# ifdef __GNUC__
-#  ifndef alloca
-#   define alloca __builtin_alloca
-#  endif
-# else
-#  if HAVE_ALLOCA_H
-#   include <alloca.h>
-#  else
-#   ifdef __hpux
-void *alloca ();
-#   else
-#    ifdef __TURBOC__
-#     include <malloc.h>
-#    else
-char *alloca ();
-#    endif
-#   endif
-#  endif
-# endif
-#endif
-
-/* Bletch, ^^^^ that was ugly! */
-
-
-int pat, scnum, eps, headcnt, trailcnt, anyccl, lastchar, i, rulelen;
-int trlcontxt, xcluflg, currccl, cclsorted, varlength, variable_trail_rule;
-
-int *scon_stk;
-int scon_stk_ptr;
-
-static int madeany = false;  /* whether we've made the '.' character class */
-int previous_continued_action;	/* whether the previous rule's action was '|' */
-
-/* Expand a POSIX character class expression. */
-#define CCL_EXPR(func) \
-	{ \
-	int c; \
-	for ( c = 0; c < csize; ++c ) \
-		if ( isascii(c) && func(c) ) \
-			ccladd( currccl, c ); \
-	}
-
-/* While POSIX defines isblank(), it's not ANSI C. */
-#define IS_BLANK(c) ((c) == ' ' || (c) == '\t')
-
-/* On some over-ambitious machines, such as DEC Alpha's, the default
- * token type is "long" instead of "int"; this leads to problems with
- * declaring yylval in flexdef.h.  But so far, all the yacc's I've seen
- * wrap their definitions of YYSTYPE with "#ifndef YYSTYPE"'s, so the
- * following should ensure that the default token type is "int".
- */
-#define YYSTYPE int
-
-#line 112 "y.tab.c"
-#define CHAR 257
-#define NUMBER 258
-#define SECTEND 259
-#define SCDECL 260
-#define XSCDECL 261
-#define NAME 262
-#define PREVCCL 263
-#define EOF_OP 264
-#define OPTION_OP 265
-#define OPT_OUTFILE 266
-#define OPT_PREFIX 267
-#define OPT_YYCLASS 268
-#define CCE_ALNUM 269
-#define CCE_ALPHA 270
-#define CCE_BLANK 271
-#define CCE_CNTRL 272
-#define CCE_DIGIT 273
-#define CCE_GRAPH 274
-#define CCE_LOWER 275
-#define CCE_PRINT 276
-#define CCE_PUNCT 277
-#define CCE_SPACE 278
-#define CCE_UPPER 279
-#define CCE_XDIGIT 280
-#define YYERRCODE 256
-short yylhs[] = {                                        -1,
-    0,    1,    2,    2,    2,    2,    3,    6,    6,    7,
-    7,    7,    8,    9,    9,   10,   10,   10,    4,    4,
-    4,    5,   12,   12,   12,   12,   14,   11,   11,   11,
-   15,   15,   15,   16,   13,   13,   13,   13,   18,   18,
-   17,   19,   19,   20,   20,   20,   20,   20,   20,   20,
-   20,   20,   20,   20,   20,   21,   21,   23,   23,   23,
-   23,   24,   24,   24,   24,   24,   24,   24,   24,   24,
-   24,   24,   24,   22,   22,
-};
-short yylen[] = {                                         2,
-    5,    0,    3,    2,    0,    1,    1,    1,    1,    2,
-    1,    1,    2,    2,    0,    3,    3,    3,    5,    5,
-    0,    0,    2,    1,    1,    1,    0,    4,    3,    0,
-    3,    1,    1,    1,    2,    3,    2,    1,    3,    1,
-    2,    2,    1,    2,    2,    2,    6,    5,    4,    1,
-    1,    1,    3,    3,    1,    3,    4,    4,    2,    2,
-    0,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-    1,    1,    1,    2,    0,
-};
-short yydefred[] = {                                      2,
-    0,    0,    6,    0,    7,    8,    9,   15,   21,    0,
-    4,    0,    0,   12,   11,    0,    0,    0,    0,   14,
-    0,    1,    0,   10,    0,    0,    0,    0,    0,   21,
-    0,   16,   17,   18,   29,   33,   34,    0,   32,    0,
-   26,   55,   52,   25,    0,   50,   75,    0,    0,    0,
-   24,    0,    0,    0,    0,   51,   28,    0,   20,   23,
-    0,    0,   61,    0,   19,    0,   37,    0,   41,    0,
-    0,   44,   45,   46,   31,   74,   53,   54,    0,    0,
-   62,   63,   64,   65,   66,   67,   68,   69,   70,   71,
-   72,   73,   56,   60,   36,    0,    0,   57,    0,   49,
-    0,   58,    0,   48,   47,
-};
-short yydgoto[] = {                                       1,
-    2,    4,    9,   13,   22,   10,   16,   11,   12,   20,
-   23,   50,   51,   29,   38,   39,   52,   53,   54,   55,
-   56,   61,   64,   94,
-};
-short yysindex[] = {                                      0,
-    0, -235,    0, -191,    0,    0,    0,    0,    0, -207,
-    0, -215,  -18,    0,    0, -202,    4,   26,   32,    0,
-   41,    0,  -35,    0, -168, -166, -165,   38, -180,    0,
-  -30,    0,    0,    0,    0,    0,    0,  -16,    0,  -40,
-    0,    0,    0,    0,   -2,    0,    0,   -2,    8,   93,
-    0,   -2,  -25,   -2,   15,    0,    0, -153,    0,    0,
-  -27,  -26,    0,  -88,    0,  -23,    0,   -2,    0,   15,
- -150,    0,    0,    0,    0,    0,    0,    0,   -3,   65,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,   -2,  -21,    0, -145,    0,
- -116,    0,  -12,    0,    0,
-};
-short yyrindex[] = {                                      0,
-    0, -188,    0,    0,    0,    0,    0,    0,    0,    0,
-    0, -154,    1,    0,    0, -140,    0,    0,    0,    0,
- -176,    0,  -28,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,  -32,
-    0,    0,    0,    0,    0,    0,    0,    0,   22,    0,
-    0,    0,  106,    7,  -10,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,  108,    0,    0,    0,   -7,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,   46,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    9,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,
-};
-short yygindex[] = {                                      0,
-    0,    0,    0,   92,  100,    0,    0,    0,    0,    0,
-    0,    0,   81,    0,    0,   69,    0,   27,   60,  -29,
-    0,    0,   66,    0,
-};
-#define YYTABLESIZE 326
-short yytable[] = {                                      43,
-   22,   30,   42,   47,   93,   22,   77,   30,  104,   48,
-   67,   22,   95,   30,   78,   46,   40,   22,   39,   21,
-    3,   69,  101,   43,   70,   43,   42,   58,   42,   43,
-   43,   47,   42,   42,   30,   43,   43,   48,   42,   42,
-   30,   21,   40,   46,   39,   57,   30,   40,   14,   39,
-   17,   18,   19,   40,   15,   39,   72,   73,   30,   24,
-   49,   30,   22,   45,   25,   22,   70,    5,    6,    7,
-    5,    5,    5,    8,   62,   36,    5,   74,   66,   27,
-   43,   37,   28,   42,   59,   27,   26,   30,   49,   98,
-   30,   30,   27,   32,   30,   33,   34,   68,   68,   35,
-   68,   63,   65,  100,   13,   13,   13,   97,   37,   99,
-   13,  102,  105,   43,   61,   38,   42,   35,    3,    3,
-    3,   40,   31,   30,    3,   60,   75,   96,   79,    0,
-   40,    0,   39,    0,    0,    0,    0,   71,   59,    0,
-    0,  103,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,   80,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-   81,   82,   83,   84,   85,   86,   87,   88,   89,   90,
-   91,   92,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,   30,   30,   41,   42,   22,   22,   76,
-   30,   30,   43,   44,   22,   22,    0,    0,    0,    0,
-    0,    0,    0,    0,    0,    0,   43,    0,    0,   42,
-    0,    0,   43,   80,   42,   42,   30,   30,    0,    0,
-   43,    0,    0,   30,   30,   81,   82,   83,   84,   85,
-   86,   87,   88,   89,   90,   91,   92,    0,   61,    0,
-    0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-   61,   61,   61,   61,   61,   61,   61,   61,   61,   61,
-   61,   61,   59,    0,    0,    0,    0,    0,    0,    0,
-    0,    0,    0,    0,   59,   59,   59,   59,   59,   59,
-   59,   59,   59,   59,   59,   59,
-};
-short yycheck[] = {                                      10,
-    0,   34,   10,   34,   93,   34,   34,   40,  125,   40,
-   36,   40,   36,   46,   41,   46,   10,   46,   10,   60,
-  256,   47,   44,   34,   54,   36,   34,   44,   36,   40,
-   41,   34,   40,   41,   34,   46,   47,   40,   46,   47,
-   40,   60,   36,   46,   36,   62,   46,   41,  256,   41,
-  266,  267,  268,   47,  262,   47,   42,   43,   91,  262,
-   91,   94,   91,   94,   61,   94,   96,  259,  260,  261,
-  259,  260,  261,  265,   48,  256,  265,   63,   52,  256,
-   91,  262,   42,   91,  125,  262,   61,  123,   91,   93,
-  123,   91,   61,  262,   94,  262,  262,  124,  124,   62,
-  124,   94,   10,  125,  259,  260,  261,  258,  262,   45,
-  265,  257,  125,  124,   93,   10,  124,   10,  259,  260,
-  261,   30,   23,  123,  265,   45,   58,   68,   63,   -1,
-  124,   -1,  124,   -1,   -1,   -1,   -1,  123,   93,   -1,
-   -1,  258,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,  257,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-  269,  270,  271,  272,  273,  274,  275,  276,  277,  278,
-  279,  280,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,  256,  257,  256,  257,  256,  257,  257,
-  263,  264,  263,  264,  263,  264,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,  257,   -1,   -1,  257,
-   -1,   -1,  263,  257,  257,  263,  256,  257,   -1,   -1,
-  263,   -1,   -1,  263,  264,  269,  270,  271,  272,  273,
-  274,  275,  276,  277,  278,  279,  280,   -1,  257,   -1,
-   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-  269,  270,  271,  272,  273,  274,  275,  276,  277,  278,
-  279,  280,  257,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
-   -1,   -1,   -1,   -1,  269,  270,  271,  272,  273,  274,
-  275,  276,  277,  278,  279,  280,
-};
-#define YYFINAL 1
-#ifndef YYDEBUG
-#define YYDEBUG 0
-#endif
-#define YYMAXTOKEN 280
-#if YYDEBUG
-char *yyname[] = {
-"end-of-file",0,0,0,0,0,0,0,0,0,"'\\n'",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,"'\"'",0,"'$'",0,0,0,"'('","')'","'*'","'+'","','","'-'","'.'","'/'",0,0,
-0,0,0,0,0,0,0,0,0,0,"'<'","'='","'>'","'?'",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,"'['",0,"']'","'^'",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,"'{'","'|'","'}'",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,"CHAR","NUMBER","SECTEND",
-"SCDECL","XSCDECL","NAME","PREVCCL","EOF_OP","OPTION_OP","OPT_OUTFILE",
-"OPT_PREFIX","OPT_YYCLASS","CCE_ALNUM","CCE_ALPHA","CCE_BLANK","CCE_CNTRL",
-"CCE_DIGIT","CCE_GRAPH","CCE_LOWER","CCE_PRINT","CCE_PUNCT","CCE_SPACE",
-"CCE_UPPER","CCE_XDIGIT",
-};
-char *yyrule[] = {
-"$accept : goal",
-"goal : initlex sect1 sect1end sect2 initforrule",
-"initlex :",
-"sect1 : sect1 startconddecl namelist1",
-"sect1 : sect1 options",
-"sect1 :",
-"sect1 : error",
-"sect1end : SECTEND",
-"startconddecl : SCDECL",
-"startconddecl : XSCDECL",
-"namelist1 : namelist1 NAME",
-"namelist1 : NAME",
-"namelist1 : error",
-"options : OPTION_OP optionlist",
-"optionlist : optionlist option",
-"optionlist :",
-"option : OPT_OUTFILE '=' NAME",
-"option : OPT_PREFIX '=' NAME",
-"option : OPT_YYCLASS '=' NAME",
-"sect2 : sect2 scon initforrule flexrule '\\n'",
-"sect2 : sect2 scon '{' sect2 '}'",
-"sect2 :",
-"initforrule :",
-"flexrule : '^' rule",
-"flexrule : rule",
-"flexrule : EOF_OP",
-"flexrule : error",
-"scon_stk_ptr :",
-"scon : '<' scon_stk_ptr namelist2 '>'",
-"scon : '<' '*' '>'",
-"scon :",
-"namelist2 : namelist2 ',' sconname",
-"namelist2 : sconname",
-"namelist2 : error",
-"sconname : NAME",
-"rule : re2 re",
-"rule : re2 re '$'",
-"rule : re '$'",
-"rule : re",
-"re : re '|' series",
-"re : series",
-"re2 : re '/'",
-"series : series singleton",
-"series : singleton",
-"singleton : singleton '*'",
-"singleton : singleton '+'",
-"singleton : singleton '?'",
-"singleton : singleton '{' NUMBER ',' NUMBER '}'",
-"singleton : singleton '{' NUMBER ',' '}'",
-"singleton : singleton '{' NUMBER '}'",
-"singleton : '.'",
-"singleton : fullccl",
-"singleton : PREVCCL",
-"singleton : '\"' string '\"'",
-"singleton : '(' re ')'",
-"singleton : CHAR",
-"fullccl : '[' ccl ']'",
-"fullccl : '[' '^' ccl ']'",
-"ccl : ccl CHAR '-' CHAR",
-"ccl : ccl CHAR",
-"ccl : ccl ccl_expr",
-"ccl :",
-"ccl_expr : CCE_ALNUM",
-"ccl_expr : CCE_ALPHA",
-"ccl_expr : CCE_BLANK",
-"ccl_expr : CCE_CNTRL",
-"ccl_expr : CCE_DIGIT",
-"ccl_expr : CCE_GRAPH",
-"ccl_expr : CCE_LOWER",
-"ccl_expr : CCE_PRINT",
-"ccl_expr : CCE_PUNCT",
-"ccl_expr : CCE_SPACE",
-"ccl_expr : CCE_UPPER",
-"ccl_expr : CCE_XDIGIT",
-"string : string CHAR",
-"string :",
-};
-#endif
-#ifndef YYSTYPE
-typedef int YYSTYPE;
-#endif
-#ifdef YYSTACKSIZE
-#undef YYMAXDEPTH
-#define YYMAXDEPTH YYSTACKSIZE
-#else
-#ifdef YYMAXDEPTH
-#define YYSTACKSIZE YYMAXDEPTH
-#else
-#define YYSTACKSIZE 500
-#define YYMAXDEPTH 500
-#endif
-#endif
-int yydebug;
-int yynerrs;
-int yyerrflag;
-int yychar;
-short *yyssp;
-YYSTYPE *yyvsp;
-YYSTYPE yyval;
-YYSTYPE yylval;
-short yyss[YYSTACKSIZE];
-YYSTYPE yyvs[YYSTACKSIZE];
-#define yystacksize YYSTACKSIZE
-#line 776 "./parse.y"
-
-
-/* build_eof_action - build the "<<EOF>>" action for the active start
- *                    conditions
- */
-
-void build_eof_action()
-	{
-	register int i;
-	char action_text[MAXLINE];
-
-	for ( i = 1; i <= scon_stk_ptr; ++i )
-		{
-		if ( sceof[scon_stk[i]] )
-			format_pinpoint_message(
-				"multiple <<EOF>> rules for start condition %s",
-				scname[scon_stk[i]] );
-
-		else
-			{
-			sceof[scon_stk[i]] = true;
-			sprintf( action_text, "case YY_STATE_EOF(%s):\n",
-				scname[scon_stk[i]] );
-			add_action( action_text );
-			}
-		}
-
-	line_directive_out( (FILE *) 0, 1 );
-
-	/* This isn't a normal rule after all - don't count it as
-	 * such, so we don't have any holes in the rule numbering
-	 * (which make generating "rule can never match" warnings
-	 * more difficult.
-	 */
-	--num_rules;
-	++num_eof_rules;
-	}
-
-
-/* format_synerr - write out formatted syntax error */
-
-void format_synerr( msg, arg )
-char msg[], arg[];
-	{
-	char errmsg[MAXLINE];
-
-	(void) sprintf( errmsg, msg, arg );
-	synerr( errmsg );
-	}
-
-
-/* synerr - report a syntax error */
-
-void synerr( str )
-char str[];
-	{
-	syntaxerror = true;
-	pinpoint_message( str );
-	}
-
-
-/* format_warn - write out formatted warning */
-
-void format_warn( msg, arg )
-char msg[], arg[];
-	{
-	char warn_msg[MAXLINE];
-
-	(void) sprintf( warn_msg, msg, arg );
-	warn( warn_msg );
-	}
-
-
-/* warn - report a warning, unless -w was given */
-
-void warn( str )
-char str[];
-	{
-	line_warning( str, linenum );
-	}
-
-/* format_pinpoint_message - write out a message formatted with one string,
- *			     pinpointing its location
- */
-
-void format_pinpoint_message( msg, arg )
-char msg[], arg[];
-	{
-	char errmsg[MAXLINE];
-
-	(void) sprintf( errmsg, msg, arg );
-	pinpoint_message( errmsg );
-	}
-
-
-/* pinpoint_message - write out a message, pinpointing its location */
-
-void pinpoint_message( str )
-char str[];
-	{
-	line_pinpoint( str, linenum );
-	}
-
-
-/* line_warning - report a warning at a given line, unless -w was given */
-
-void line_warning( str, line )
-char str[];
-int line;
-	{
-	char warning[MAXLINE];
-
-	if ( ! nowarn )
-		{
-		sprintf( warning, "warning, %s", str );
-		line_pinpoint( warning, line );
-		}
-	}
-
-
-/* line_pinpoint - write out a message, pinpointing it at the given line */
-
-void line_pinpoint( str, line )
-char str[];
-int line;
-	{
-	fprintf( stderr, "\"%s\", line %d: %s\n", infilename, line, str );
-	}
-
-
-/* yyerror - eat up an error message from the parser;
- *	     currently, messages are ignore
- */
-
-void yyerror( msg )
-char msg[];
-	{
-	}
-#line 541 "y.tab.c"
-#define YYABORT goto yyabort
-#define YYREJECT goto yyabort
-#define YYACCEPT goto yyaccept
-#define YYERROR goto yyerrlab
-int
-yyparse()
-{
-    register int yym, yyn, yystate;
-#if YYDEBUG
-    register char *yys;
-    extern char *getenv();
-
-    if (yys = getenv("YYDEBUG"))
-    {
-        yyn = *yys;
-        if (yyn >= '0' && yyn <= '9')
-            yydebug = yyn - '0';
-    }
-#endif
-
-    yynerrs = 0;
-    yyerrflag = 0;
-    yychar = (-1);
-
-    yyssp = yyss;
-    yyvsp = yyvs;
-    *yyssp = yystate = 0;
-
-yyloop:
-    if (yyn = yydefred[yystate]) goto yyreduce;
-    if (yychar < 0)
-    {
-        if ((yychar = yylex()) < 0) yychar = 0;
-#if YYDEBUG
-        if (yydebug)
-        {
-            yys = 0;
-            if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-            if (!yys) yys = "illegal-symbol";
-            printf("%sdebug: state %d, reading %d (%s)\n",
-                    YYPREFIX, yystate, yychar, yys);
-        }
-#endif
-    }
-    if ((yyn = yysindex[yystate]) && (yyn += yychar) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
-    {
-#if YYDEBUG
-        if (yydebug)
-            printf("%sdebug: state %d, shifting to state %d\n",
-                    YYPREFIX, yystate, yytable[yyn]);
-#endif
-        if (yyssp >= yyss + yystacksize - 1)
-        {
-            goto yyoverflow;
-        }
-        *++yyssp = yystate = yytable[yyn];
-        *++yyvsp = yylval;
-        yychar = (-1);
-        if (yyerrflag > 0)  --yyerrflag;
-        goto yyloop;
-    }
-    if ((yyn = yyrindex[yystate]) && (yyn += yychar) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yychar)
-    {
-        yyn = yytable[yyn];
-        goto yyreduce;
-    }
-    if (yyerrflag) goto yyinrecovery;
-#ifdef lint
-    goto yynewerror;
-#endif
-yynewerror:
-    yyerror("syntax error");
-#ifdef lint
-    goto yyerrlab;
-#endif
-yyerrlab:
-    ++yynerrs;
-yyinrecovery:
-    if (yyerrflag < 3)
-    {
-        yyerrflag = 3;
-        for (;;)
-        {
-            if ((yyn = yysindex[*yyssp]) && (yyn += YYERRCODE) >= 0 &&
-                    yyn <= YYTABLESIZE && yycheck[yyn] == YYERRCODE)
-            {
-#if YYDEBUG
-                if (yydebug)
-                    printf("%sdebug: state %d, error recovery shifting\
- to state %d\n", YYPREFIX, *yyssp, yytable[yyn]);
-#endif
-                if (yyssp >= yyss + yystacksize - 1)
-                {
-                    goto yyoverflow;
-                }
-                *++yyssp = yystate = yytable[yyn];
-                *++yyvsp = yylval;
-                goto yyloop;
-            }
-            else
-            {
-#if YYDEBUG
-                if (yydebug)
-                    printf("%sdebug: error recovery discarding state %d\n",
-                            YYPREFIX, *yyssp);
-#endif
-                if (yyssp <= yyss) goto yyabort;
-                --yyssp;
-                --yyvsp;
-            }
-        }
-    }
-    else
-    {
-        if (yychar == 0) goto yyabort;
-#if YYDEBUG
-        if (yydebug)
-        {
-            yys = 0;
-            if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-            if (!yys) yys = "illegal-symbol";
-            printf("%sdebug: state %d, error recovery discards token %d (%s)\n",
-                    YYPREFIX, yystate, yychar, yys);
-        }
-#endif
-        yychar = (-1);
-        goto yyloop;
-    }
-yyreduce:
-#if YYDEBUG
-    if (yydebug)
-        printf("%sdebug: state %d, reducing by rule %d (%s)\n",
-                YYPREFIX, yystate, yyn, yyrule[yyn]);
-#endif
-    yym = yylen[yyn];
-    yyval = yyvsp[1-yym];
-    switch (yyn)
-    {
-case 1:
-#line 113 "./parse.y"
-{ /* add default rule */
-			int def_rule;
-
-			pat = cclinit();
-			cclnegate( pat );
-
-			def_rule = mkstate( -pat );
-
-			/* Remember the number of the default rule so we
-			 * don't generate "can't match" warnings for it.
-			 */
-			default_rule = num_rules;
-
-			finish_rule( def_rule, false, 0, 0 );
-
-			for ( i = 1; i <= lastsc; ++i )
-				scset[i] = mkbranch( scset[i], def_rule );
-
-			if ( spprdflt )
-				add_action(
-				"YY_FATAL_ERROR( \"flex scanner jammed\" )" );
-			else
-				add_action( "ECHO" );
-
-			add_action( ";\n\tYY_BREAK\n" );
-			}
-break;
-case 2:
-#line 142 "./parse.y"
-{ /* initialize for processing rules */
-
-			/* Create default DFA start condition. */
-			scinstal( "INITIAL", false );
-			}
-break;
-case 6:
-#line 153 "./parse.y"
-{ synerr( "unknown error processing section 1" ); }
-break;
-case 7:
-#line 157 "./parse.y"
-{
-			check_options();
-			scon_stk = allocate_integer_array( lastsc + 1 );
-			scon_stk_ptr = 0;
-			}
-break;
-case 8:
-#line 165 "./parse.y"
-{ xcluflg = false; }
-break;
-case 9:
-#line 168 "./parse.y"
-{ xcluflg = true; }
-break;
-case 10:
-#line 172 "./parse.y"
-{ scinstal( nmstr, xcluflg ); }
-break;
-case 11:
-#line 175 "./parse.y"
-{ scinstal( nmstr, xcluflg ); }
-break;
-case 12:
-#line 178 "./parse.y"
-{ synerr( "bad start condition list" ); }
-break;
-case 16:
-#line 189 "./parse.y"
-{
-			outfilename = copy_string( nmstr );
-			did_outfilename = 1;
-			}
-break;
-case 17:
-#line 194 "./parse.y"
-{ prefix = copy_string( nmstr ); }
-break;
-case 18:
-#line 196 "./parse.y"
-{ yyclass = copy_string( nmstr ); }
-break;
-case 19:
-#line 200 "./parse.y"
-{ scon_stk_ptr = yyvsp[-3]; }
-break;
-case 20:
-#line 202 "./parse.y"
-{ scon_stk_ptr = yyvsp[-3]; }
-break;
-case 22:
-#line 207 "./parse.y"
-{
-			/* Initialize for a parse of one rule. */
-			trlcontxt = variable_trail_rule = varlength = false;
-			trailcnt = headcnt = rulelen = 0;
-			current_state_type = STATE_NORMAL;
-			previous_continued_action = continued_action;
-			in_rule = true;
-
-			new_rule();
-			}
-break;
-case 23:
-#line 220 "./parse.y"
-{
-			pat = yyvsp[0];
-			finish_rule( pat, variable_trail_rule,
-				headcnt, trailcnt );
-
-			if ( scon_stk_ptr > 0 )
-				{
-				for ( i = 1; i <= scon_stk_ptr; ++i )
-					scbol[scon_stk[i]] =
-						mkbranch( scbol[scon_stk[i]],
-								pat );
-				}
-
-			else
-				{
-				/* Add to all non-exclusive start conditions,
-				 * including the default (0) start condition.
-				 */
-
-				for ( i = 1; i <= lastsc; ++i )
-					if ( ! scxclu[i] )
-						scbol[i] = mkbranch( scbol[i],
-									pat );
-				}
-
-			if ( ! bol_needed )
-				{
-				bol_needed = true;
-
-				if ( performance_report > 1 )
-					pinpoint_message(
-			"'^' operator results in sub-optimal performance" );
-				}
-			}
-break;
-case 24:
-#line 256 "./parse.y"
-{
-			pat = yyvsp[0];
-			finish_rule( pat, variable_trail_rule,
-				headcnt, trailcnt );
-
-			if ( scon_stk_ptr > 0 )
-				{
-				for ( i = 1; i <= scon_stk_ptr; ++i )
-					scset[scon_stk[i]] =
-						mkbranch( scset[scon_stk[i]],
-								pat );
-				}
-
-			else
-				{
-				for ( i = 1; i <= lastsc; ++i )
-					if ( ! scxclu[i] )
-						scset[i] =
-							mkbranch( scset[i],
-								pat );
-				}
-			}
-break;
-case 25:
-#line 280 "./parse.y"
-{
-			if ( scon_stk_ptr > 0 )
-				build_eof_action();
-	
-			else
-				{
-				/* This EOF applies to all start conditions
-				 * which don't already have EOF actions.
-				 */
-				for ( i = 1; i <= lastsc; ++i )
-					if ( ! sceof[i] )
-						scon_stk[++scon_stk_ptr] = i;
-
-				if ( scon_stk_ptr == 0 )
-					warn(
-			"all start conditions already have <<EOF>> rules" );
-
-				else
-					build_eof_action();
-				}
-			}
-break;
-case 26:
-#line 303 "./parse.y"
-{ synerr( "unrecognized rule" ); }
-break;
-case 27:
-#line 307 "./parse.y"
-{ yyval = scon_stk_ptr; }
-break;
-case 28:
-#line 311 "./parse.y"
-{ yyval = yyvsp[-2]; }
-break;
-case 29:
-#line 314 "./parse.y"
-{
-			yyval = scon_stk_ptr;
-
-			for ( i = 1; i <= lastsc; ++i )
-				{
-				int j;
-
-				for ( j = 1; j <= scon_stk_ptr; ++j )
-					if ( scon_stk[j] == i )
-						break;
-
-				if ( j > scon_stk_ptr )
-					scon_stk[++scon_stk_ptr] = i;
-				}
-			}
-break;
-case 30:
-#line 331 "./parse.y"
-{ yyval = scon_stk_ptr; }
-break;
-case 33:
-#line 339 "./parse.y"
-{ synerr( "bad start condition list" ); }
-break;
-case 34:
-#line 343 "./parse.y"
-{
-			if ( (scnum = sclookup( nmstr )) == 0 )
-				format_pinpoint_message(
-					"undeclared start condition %s",
-					nmstr );
-			else
-				{
-				for ( i = 1; i <= scon_stk_ptr; ++i )
-					if ( scon_stk[i] == scnum )
-						{
-						format_warn(
-							"<%s> specified twice",
-							scname[scnum] );
-						break;
-						}
-
-				if ( i > scon_stk_ptr )
-					scon_stk[++scon_stk_ptr] = scnum;
-				}
-			}
-break;
-case 35:
-#line 366 "./parse.y"
-{
-			if ( transchar[lastst[yyvsp[0]]] != SYM_EPSILON )
-				/* Provide final transition \now/ so it
-				 * will be marked as a trailing context
-				 * state.
-				 */
-				yyvsp[0] = link_machines( yyvsp[0],
-						mkstate( SYM_EPSILON ) );
-
-			mark_beginning_as_normal( yyvsp[0] );
-			current_state_type = STATE_NORMAL;
-
-			if ( previous_continued_action )
-				{
-				/* We need to treat this as variable trailing
-				 * context so that the backup does not happen
-				 * in the action but before the action switch
-				 * statement.  If the backup happens in the
-				 * action, then the rules "falling into" this
-				 * one's action will *also* do the backup,
-				 * erroneously.
-				 */
-				if ( ! varlength || headcnt != 0 )
-					warn(
-		"trailing context made variable due to preceding '|' action" );
-
-				/* Mark as variable. */
-				varlength = true;
-				headcnt = 0;
-				}
-
-			if ( lex_compat || (varlength && headcnt == 0) )
-				{ /* variable trailing context rule */
-				/* Mark the first part of the rule as the
-				 * accepting "head" part of a trailing
-				 * context rule.
-				 *
-				 * By the way, we didn't do this at the
-				 * beginning of this production because back
-				 * then current_state_type was set up for a
-				 * trail rule, and add_accept() can create
-				 * a new state ...
-				 */
-				add_accept( yyvsp[-1],
-					num_rules | YY_TRAILING_HEAD_MASK );
-				variable_trail_rule = true;
-				}
-			
-			else
-				trailcnt = rulelen;
-
-			yyval = link_machines( yyvsp[-1], yyvsp[0] );
-			}
-break;
-case 36:
-#line 421 "./parse.y"
-{ synerr( "trailing context used twice" ); }
-break;
-case 37:
-#line 424 "./parse.y"
-{
-			headcnt = 0;
-			trailcnt = 1;
-			rulelen = 1;
-			varlength = false;
-
-			current_state_type = STATE_TRAILING_CONTEXT;
-
-			if ( trlcontxt )
-				{
-				synerr( "trailing context used twice" );
-				yyval = mkstate( SYM_EPSILON );
-				}
-
-			else if ( previous_continued_action )
-				{
-				/* See the comment in the rule for "re2 re"
-				 * above.
-				 */
-				warn(
-		"trailing context made variable due to preceding '|' action" );
-
-				varlength = true;
-				}
-
-			if ( lex_compat || varlength )
-				{
-				/* Again, see the comment in the rule for
-				 * "re2 re" above.
-				 */
-				add_accept( yyvsp[-1],
-					num_rules | YY_TRAILING_HEAD_MASK );
-				variable_trail_rule = true;
-				}
-
-			trlcontxt = true;
-
-			eps = mkstate( SYM_EPSILON );
-			yyval = link_machines( yyvsp[-1],
-				link_machines( eps, mkstate( '\n' ) ) );
-			}
-break;
-case 38:
-#line 467 "./parse.y"
-{
-			yyval = yyvsp[0];
-
-			if ( trlcontxt )
-				{
-				if ( lex_compat || (varlength && headcnt == 0) )
-					/* Both head and trail are
-					 * variable-length.
-					 */
-					variable_trail_rule = true;
-				else
-					trailcnt = rulelen;
-				}
-			}
-break;
-case 39:
-#line 485 "./parse.y"
-{
-			varlength = true;
-			yyval = mkor( yyvsp[-2], yyvsp[0] );
-			}
-break;
-case 40:
-#line 491 "./parse.y"
-{ yyval = yyvsp[0]; }
-break;
-case 41:
-#line 496 "./parse.y"
-{
-			/* This rule is written separately so the
-			 * reduction will occur before the trailing
-			 * series is parsed.
-			 */
-
-			if ( trlcontxt )
-				synerr( "trailing context used twice" );
-			else
-				trlcontxt = true;
-
-			if ( varlength )
-				/* We hope the trailing context is
-				 * fixed-length.
-				 */
-				varlength = false;
-			else
-				headcnt = rulelen;
-
-			rulelen = 0;
-
-			current_state_type = STATE_TRAILING_CONTEXT;
-			yyval = yyvsp[-1];
-			}
-break;
-case 42:
-#line 523 "./parse.y"
-{
-			/* This is where concatenation of adjacent patterns
-			 * gets done.
-			 */
-			yyval = link_machines( yyvsp[-1], yyvsp[0] );
-			}
-break;
-case 43:
-#line 531 "./parse.y"
-{ yyval = yyvsp[0]; }
-break;
-case 44:
-#line 535 "./parse.y"
-{
-			varlength = true;
-
-			yyval = mkclos( yyvsp[-1] );
-			}
-break;
-case 45:
-#line 542 "./parse.y"
-{
-			varlength = true;
-			yyval = mkposcl( yyvsp[-1] );
-			}
-break;
-case 46:
-#line 548 "./parse.y"
-{
-			varlength = true;
-			yyval = mkopt( yyvsp[-1] );
-			}
-break;
-case 47:
-#line 554 "./parse.y"
-{
-			varlength = true;
-
-			if ( yyvsp[-3] > yyvsp[-1] || yyvsp[-3] < 0 )
-				{
-				synerr( "bad iteration values" );
-				yyval = yyvsp[-5];
-				}
-			else
-				{
-				if ( yyvsp[-3] == 0 )
-					{
-					if ( yyvsp[-1] <= 0 )
-						{
-						synerr(
-						"bad iteration values" );
-						yyval = yyvsp[-5];
-						}
-					else
-						yyval = mkopt(
-							mkrep( yyvsp[-5], 1, yyvsp[-1] ) );
-					}
-				else
-					yyval = mkrep( yyvsp[-5], yyvsp[-3], yyvsp[-1] );
-				}
-			}
-break;
-case 48:
-#line 582 "./parse.y"
-{
-			varlength = true;
-
-			if ( yyvsp[-2] <= 0 )
-				{
-				synerr( "iteration value must be positive" );
-				yyval = yyvsp[-4];
-				}
-
-			else
-				yyval = mkrep( yyvsp[-4], yyvsp[-2], INFINITY );
-			}
-break;
-case 49:
-#line 596 "./parse.y"
-{
-			/* The singleton could be something like "(foo)",
-			 * in which case we have no idea what its length
-			 * is, so we punt here.
-			 */
-			varlength = true;
-
-			if ( yyvsp[-1] <= 0 )
-				{
-				synerr( "iteration value must be positive" );
-				yyval = yyvsp[-3];
-				}
-
-			else
-				yyval = link_machines( yyvsp[-3],
-						copysingl( yyvsp[-3], yyvsp[-1] - 1 ) );
-			}
-break;
-case 50:
-#line 615 "./parse.y"
-{
-			if ( ! madeany )
-				{
-				/* Create the '.' character class. */
-				anyccl = cclinit();
-				ccladd( anyccl, '\n' );
-				cclnegate( anyccl );
-
-				if ( useecs )
-					mkeccl( ccltbl + cclmap[anyccl],
-						ccllen[anyccl], nextecm,
-						ecgroup, csize, csize );
-
-				madeany = true;
-				}
-
-			++rulelen;
-
-			yyval = mkstate( -anyccl );
-			}
-break;
-case 51:
-#line 637 "./parse.y"
-{
-			if ( ! cclsorted )
-				/* Sort characters for fast searching.  We
-				 * use a shell sort since this list could
-				 * be large.
-				 */
-				cshell( ccltbl + cclmap[yyvsp[0]], ccllen[yyvsp[0]], true );
-
-			if ( useecs )
-				mkeccl( ccltbl + cclmap[yyvsp[0]], ccllen[yyvsp[0]],
-					nextecm, ecgroup, csize, csize );
-
-			++rulelen;
-
-			yyval = mkstate( -yyvsp[0] );
-			}
-break;
-case 52:
-#line 655 "./parse.y"
-{
-			++rulelen;
-
-			yyval = mkstate( -yyvsp[0] );
-			}
-break;
-case 53:
-#line 662 "./parse.y"
-{ yyval = yyvsp[-1]; }
-break;
-case 54:
-#line 665 "./parse.y"
-{ yyval = yyvsp[-1]; }
-break;
-case 55:
-#line 668 "./parse.y"
-{
-			++rulelen;
-
-			if ( caseins && yyvsp[0] >= 'A' && yyvsp[0] <= 'Z' )
-				yyvsp[0] = clower( yyvsp[0] );
-
-			yyval = mkstate( yyvsp[0] );
-			}
-break;
-case 56:
-#line 679 "./parse.y"
-{ yyval = yyvsp[-1]; }
-break;
-case 57:
-#line 682 "./parse.y"
-{
-			cclnegate( yyvsp[-1] );
-			yyval = yyvsp[-1];
-			}
-break;
-case 58:
-#line 689 "./parse.y"
-{
-			if ( caseins )
-				{
-				if ( yyvsp[-2] >= 'A' && yyvsp[-2] <= 'Z' )
-					yyvsp[-2] = clower( yyvsp[-2] );
-				if ( yyvsp[0] >= 'A' && yyvsp[0] <= 'Z' )
-					yyvsp[0] = clower( yyvsp[0] );
-				}
-
-			if ( yyvsp[-2] > yyvsp[0] )
-				synerr( "negative range in character class" );
-
-			else
-				{
-				for ( i = yyvsp[-2]; i <= yyvsp[0]; ++i )
-					ccladd( yyvsp[-3], i );
-
-				/* Keep track if this ccl is staying in
-				 * alphabetical order.
-				 */
-				cclsorted = cclsorted && (yyvsp[-2] > lastchar);
-				lastchar = yyvsp[0];
-				}
-
-			yyval = yyvsp[-3];
-			}
-break;
-case 59:
-#line 717 "./parse.y"
-{
-			if ( caseins && yyvsp[0] >= 'A' && yyvsp[0] <= 'Z' )
-				yyvsp[0] = clower( yyvsp[0] );
-
-			ccladd( yyvsp[-1], yyvsp[0] );
-			cclsorted = cclsorted && (yyvsp[0] > lastchar);
-			lastchar = yyvsp[0];
-			yyval = yyvsp[-1];
-			}
-break;
-case 60:
-#line 728 "./parse.y"
-{
-			/* Too hard to properly maintain cclsorted. */
-			cclsorted = false;
-			yyval = yyvsp[-1];
-			}
-break;
-case 61:
-#line 735 "./parse.y"
-{
-			cclsorted = true;
-			lastchar = 0;
-			currccl = yyval = cclinit();
-			}
-break;
-case 62:
-#line 742 "./parse.y"
-{ CCL_EXPR(isalnum) }
-break;
-case 63:
-#line 743 "./parse.y"
-{ CCL_EXPR(isalpha) }
-break;
-case 64:
-#line 744 "./parse.y"
-{ CCL_EXPR(IS_BLANK) }
-break;
-case 65:
-#line 745 "./parse.y"
-{ CCL_EXPR(iscntrl) }
-break;
-case 66:
-#line 746 "./parse.y"
-{ CCL_EXPR(isdigit) }
-break;
-case 67:
-#line 747 "./parse.y"
-{ CCL_EXPR(isgraph) }
-break;
-case 68:
-#line 748 "./parse.y"
-{ CCL_EXPR(islower) }
-break;
-case 69:
-#line 749 "./parse.y"
-{ CCL_EXPR(isprint) }
-break;
-case 70:
-#line 750 "./parse.y"
-{ CCL_EXPR(ispunct) }
-break;
-case 71:
-#line 751 "./parse.y"
-{ CCL_EXPR(isspace) }
-break;
-case 72:
-#line 752 "./parse.y"
-{
-				if ( caseins )
-					CCL_EXPR(islower)
-				else
-					CCL_EXPR(isupper)
-				}
-break;
-case 73:
-#line 758 "./parse.y"
-{ CCL_EXPR(isxdigit) }
-break;
-case 74:
-#line 762 "./parse.y"
-{
-			if ( caseins && yyvsp[0] >= 'A' && yyvsp[0] <= 'Z' )
-				yyvsp[0] = clower( yyvsp[0] );
-
-			++rulelen;
-
-			yyval = link_machines( yyvsp[-1], mkstate( yyvsp[0] ) );
-			}
-break;
-case 75:
-#line 772 "./parse.y"
-{ yyval = mkstate( SYM_EPSILON ); }
-break;
-#line 1397 "y.tab.c"
-    }
-    yyssp -= yym;
-    yystate = *yyssp;
-    yyvsp -= yym;
-    yym = yylhs[yyn];
-    if (yystate == 0 && yym == 0)
-    {
-#if YYDEBUG
-        if (yydebug)
-            printf("%sdebug: after reduction, shifting from state 0 to\
- state %d\n", YYPREFIX, YYFINAL);
-#endif
-        yystate = YYFINAL;
-        *++yyssp = YYFINAL;
-        *++yyvsp = yyval;
-        if (yychar < 0)
-        {
-            if ((yychar = yylex()) < 0) yychar = 0;
-#if YYDEBUG
-            if (yydebug)
-            {
-                yys = 0;
-                if (yychar <= YYMAXTOKEN) yys = yyname[yychar];
-                if (!yys) yys = "illegal-symbol";
-                printf("%sdebug: state %d, reading %d (%s)\n",
-                        YYPREFIX, YYFINAL, yychar, yys);
-            }
-#endif
-        }
-        if (yychar == 0) goto yyaccept;
-        goto yyloop;
-    }
-    if ((yyn = yygindex[yym]) && (yyn += yystate) >= 0 &&
-            yyn <= YYTABLESIZE && yycheck[yyn] == yystate)
-        yystate = yytable[yyn];
-    else
-        yystate = yydgoto[yym];
-#if YYDEBUG
-    if (yydebug)
-        printf("%sdebug: after reduction, shifting from state %d \
-to state %d\n", YYPREFIX, *yyssp, yystate);
-#endif
-    if (yyssp >= yyss + yystacksize - 1)
-    {
-        goto yyoverflow;
-    }
-    *++yyssp = yystate;
-    *++yyvsp = yyval;
-    goto yyloop;
-yyoverflow:
-    yyerror("yacc stack overflow");
-yyabort:
-    return (1);
-yyaccept:
-    return (0);
-}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/parse.h b/WebKitTools/android/flex-2.5.4a/MISC/parse.h
deleted file mode 100644
index 10febed..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/parse.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#define CHAR 257
-#define NUMBER 258
-#define SECTEND 259
-#define SCDECL 260
-#define XSCDECL 261
-#define NAME 262
-#define PREVCCL 263
-#define EOF_OP 264
-#define OPTION_OP 265
-#define OPT_OUTFILE 266
-#define OPT_PREFIX 267
-#define OPT_YYCLASS 268
-#define CCE_ALNUM 269
-#define CCE_ALPHA 270
-#define CCE_BLANK 271
-#define CCE_CNTRL 272
-#define CCE_DIGIT 273
-#define CCE_GRAPH 274
-#define CCE_LOWER 275
-#define CCE_PRINT 276
-#define CCE_PUNCT 277
-#define CCE_SPACE 278
-#define CCE_UPPER 279
-#define CCE_XDIGIT 280
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/testxxLexer.l b/WebKitTools/android/flex-2.5.4a/MISC/testxxLexer.l
deleted file mode 100644
index 9421541..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/testxxLexer.l
+++ /dev/null
@@ -1,58 +0,0 @@
-	// An example of using the flex C++ scanner class.
-
-%option C++ noyywrap
-
-%{
-int mylineno = 0;
-%}
-
-string	\"[^\n"]+\"
-
-ws	[ \t]+
-
-alpha	[A-Za-z]
-dig	[0-9]
-name	({alpha}|{dig}|\$)({alpha}|{dig}|\_|\.|\-|\/|\$)*
-num1	[-+]?{dig}+\.?([eE][-+]?{dig}+)?
-num2	[-+]?{dig}*\.{dig}+([eE][-+]?{dig}+)?
-number	{num1}|{num2}
-
-%%
-
-{ws}	/* skip blanks and tabs */
-
-"/*"		{
-		int c;
-
-		while((c = yyinput()) != 0)
-			{
-			if(c == '\n')
-				++mylineno;
-
-			else if(c == '*')
-				{
-				if((c = yyinput()) == '/')
-					break;
-				else
-					unput(c);
-				}
-			}
-		}
-
-{number}	cout << "number " << YYText() << '\n';
-
-\n		mylineno++;
-
-{name}		cout << "name " << YYText() << '\n';
-
-{string}	cout << "string " << YYText() << '\n';
-
-%%
-
-int main( int /* argc */, char** /* argv */ )
-	{
-	FlexLexer* lexer = new yyFlexLexer;
-	while(lexer->yylex() != 0)
-		;
-	return 0;
-	}
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/texinfo/flex.info b/WebKitTools/android/flex-2.5.4a/MISC/texinfo/flex.info
deleted file mode 100644
index 9269418..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/texinfo/flex.info
+++ /dev/null
@@ -1,2951 +0,0 @@
-This is Info file flex.info, produced by Makeinfo-1.55 from the input
-file flex.texi.
-
-START-INFO-DIR-ENTRY
-* Flex: (flex).         A fast scanner generator.
-END-INFO-DIR-ENTRY
-
-   This file documents Flex.
-
-   Copyright (c) 1990 The Regents of the University of California.  All
-rights reserved.
-
-   This code is derived from software contributed to Berkeley by Vern
-Paxson.
-
-   The United States Government has rights in this work pursuant to
-contract no. DE-AC03-76SF00098 between the United States Department of
-Energy and the University of California.
-
-   Redistribution and use in source and binary forms with or without
-modification are permitted provided that: (1) source distributions
-retain this entire copyright notice and comment, and (2) distributions
-including binaries display the following acknowledgement:  "This
-product includes software developed by the University of California,
-Berkeley and its contributors" in the documentation or other materials
-provided with the distribution and in all advertising materials
-mentioning features or use of this software.  Neither the name of the
-University nor the names of its contributors may be used to endorse or
-promote products derived from this software without specific prior
-written permission.
-
-   THIS SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED
-WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-
-File: flex.info,  Node: Top,  Next: Name,  Prev: (dir),  Up: (dir)
-
-flex
-****
-
-   This manual documents `flex'.  It covers release 2.5.
-
-* Menu:
-
-* Name::                        Name
-* Synopsis::                    Synopsis
-* Overview::                    Overview
-* Description::                 Description
-* Examples::                    Some simple examples
-* Format::                      Format of the input file
-* Patterns::                    Patterns
-* Matching::                    How the input is matched
-* Actions::                     Actions
-* Generated scanner::           The generated scanner
-* Start conditions::            Start conditions
-* Multiple buffers::            Multiple input buffers
-* End-of-file rules::           End-of-file rules
-* Miscellaneous::               Miscellaneous macros
-* User variables::              Values available to the user
-* YACC interface::              Interfacing with `yacc'
-* Options::                     Options
-* Performance::                 Performance considerations
-* C++::                         Generating C++ scanners
-* Incompatibilities::           Incompatibilities with `lex' and POSIX
-* Diagnostics::                 Diagnostics
-* Files::                       Files
-* Deficiencies::                Deficiencies / Bugs
-* See also::                    See also
-* Author::                      Author
-
-
-File: flex.info,  Node: Name,  Next: Synopsis,  Prev: Top,  Up: Top
-
-Name
-====
-
-   flex - fast lexical analyzer generator
-
-
-File: flex.info,  Node: Synopsis,  Next: Overview,  Prev: Name,  Up: Top
-
-Synopsis
-========
-
-     flex [-bcdfhilnpstvwBFILTV78+? -C[aefFmr] -ooutput -Pprefix -Sskeleton]
-     [--help --version] [FILENAME ...]
-
-
-File: flex.info,  Node: Overview,  Next: Description,  Prev: Synopsis,  Up: Top
-
-Overview
-========
-
-   This manual describes `flex', a tool for generating programs that
-perform pattern-matching on text.  The manual includes both tutorial
-and reference sections:
-
-Description
-     a brief overview of the tool
-
-Some Simple Examples
-Format Of The Input File
-Patterns
-     the extended regular expressions used by flex
-
-How The Input Is Matched
-     the rules for determining what has been matched
-
-Actions
-     how to specify what to do when a pattern is matched
-
-The Generated Scanner
-     details regarding the scanner that flex produces; how to control
-     the input source
-
-Start Conditions
-     introducing context into your scanners, and managing
-     "mini-scanners"
-
-Multiple Input Buffers
-     how to manipulate multiple input sources; how to scan from strings
-     instead of files
-
-End-of-file Rules
-     special rules for matching the end of the input
-
-Miscellaneous Macros
-     a summary of macros available to the actions
-
-Values Available To The User
-     a summary of values available to the actions
-
-Interfacing With Yacc
-     connecting flex scanners together with yacc parsers
-
-Options
-     flex command-line options, and the "%option" directive
-
-Performance Considerations
-     how to make your scanner go as fast as possible
-
-Generating C++ Scanners
-     the (experimental) facility for generating C++ scanner classes
-
-Incompatibilities With Lex And POSIX
-     how flex differs from AT&T lex and the POSIX lex standard
-
-Diagnostics
-     those error messages produced by flex (or scanners it generates)
-     whose meanings might not be apparent
-
-Files
-     files used by flex
-
-Deficiencies / Bugs
-     known problems with flex
-
-See Also
-     other documentation, related tools
-
-Author
-     includes contact information
-
-
-File: flex.info,  Node: Description,  Next: Examples,  Prev: Overview,  Up: Top
-
-Description
-===========
-
-   `flex' is a tool for generating "scanners": programs which
-recognized lexical patterns in text.  `flex' reads the given input
-files, or its standard input if no file names are given, for a
-description of a scanner to generate.  The description is in the form
-of pairs of regular expressions and C code, called "rules". `flex'
-generates as output a C source file, `lex.yy.c', which defines a
-routine `yylex()'.  This file is compiled and linked with the `-lfl'
-library to produce an executable.  When the executable is run, it
-analyzes its input for occurrences of the regular expressions.
-Whenever it finds one, it executes the corresponding C code.
-
-
-File: flex.info,  Node: Examples,  Next: Format,  Prev: Description,  Up: Top
-
-Some simple examples
-====================
-
-   First some simple examples to get the flavor of how one uses `flex'.
-The following `flex' input specifies a scanner which whenever it
-encounters the string "username" will replace it with the user's login
-name:
-
-     %%
-     username    printf( "%s", getlogin() );
-
-   By default, any text not matched by a `flex' scanner is copied to
-the output, so the net effect of this scanner is to copy its input file
-to its output with each occurrence of "username" expanded.  In this
-input, there is just one rule.  "username" is the PATTERN and the
-"printf" is the ACTION.  The "%%" marks the beginning of the rules.
-
-   Here's another simple example:
-
-             int num_lines = 0, num_chars = 0;
-     
-     %%
-     \n      ++num_lines; ++num_chars;
-     .       ++num_chars;
-     
-     %%
-     main()
-             {
-             yylex();
-             printf( "# of lines = %d, # of chars = %d\n",
-                     num_lines, num_chars );
-             }
-
-   This scanner counts the number of characters and the number of lines
-in its input (it produces no output other than the final report on the
-counts).  The first line declares two globals, "num_lines" and
-"num_chars", which are accessible both inside `yylex()' and in the
-`main()' routine declared after the second "%%".  There are two rules,
-one which matches a newline ("\n") and increments both the line count
-and the character count, and one which matches any character other than
-a newline (indicated by the "." regular expression).
-
-   A somewhat more complicated example:
-
-     /* scanner for a toy Pascal-like language */
-     
-     %{
-     /* need this for the call to atof() below */
-     #include <math.h>
-     %}
-     
-     DIGIT    [0-9]
-     ID       [a-z][a-z0-9]*
-     
-     %%
-     
-     {DIGIT}+    {
-                 printf( "An integer: %s (%d)\n", yytext,
-                         atoi( yytext ) );
-                 }
-     
-     {DIGIT}+"."{DIGIT}*        {
-                 printf( "A float: %s (%g)\n", yytext,
-                         atof( yytext ) );
-                 }
-     
-     if|then|begin|end|procedure|function        {
-                 printf( "A keyword: %s\n", yytext );
-                 }
-     
-     {ID}        printf( "An identifier: %s\n", yytext );
-     
-     "+"|"-"|"*"|"/"   printf( "An operator: %s\n", yytext );
-     
-     "{"[^}\n]*"}"     /* eat up one-line comments */
-     
-     [ \t\n]+          /* eat up whitespace */
-     
-     .           printf( "Unrecognized character: %s\n", yytext );
-     
-     %%
-     
-     main( argc, argv )
-     int argc;
-     char **argv;
-         {
-         ++argv, --argc;  /* skip over program name */
-         if ( argc > 0 )
-                 yyin = fopen( argv[0], "r" );
-         else
-                 yyin = stdin;
-     
-         yylex();
-         }
-
-   This is the beginnings of a simple scanner for a language like
-Pascal.  It identifies different types of TOKENS and reports on what it
-has seen.
-
-   The details of this example will be explained in the following
-sections.
-
-
-File: flex.info,  Node: Format,  Next: Patterns,  Prev: Examples,  Up: Top
-
-Format of the input file
-========================
-
-   The `flex' input file consists of three sections, separated by a
-line with just `%%' in it:
-
-     definitions
-     %%
-     rules
-     %%
-     user code
-
-   The "definitions" section contains declarations of simple "name"
-definitions to simplify the scanner specification, and declarations of
-"start conditions", which are explained in a later section.  Name
-definitions have the form:
-
-     name definition
-
-   The "name" is a word beginning with a letter or an underscore ('_')
-followed by zero or more letters, digits, '_', or '-' (dash).  The
-definition is taken to begin at the first non-white-space character
-following the name and continuing to the end of the line.  The
-definition can subsequently be referred to using "{name}", which will
-expand to "(definition)".  For example,
-
-     DIGIT    [0-9]
-     ID       [a-z][a-z0-9]*
-
-defines "DIGIT" to be a regular expression which matches a single
-digit, and "ID" to be a regular expression which matches a letter
-followed by zero-or-more letters-or-digits.  A subsequent reference to
-
-     {DIGIT}+"."{DIGIT}*
-
-is identical to
-
-     ([0-9])+"."([0-9])*
-
-and matches one-or-more digits followed by a '.' followed by
-zero-or-more digits.
-
-   The RULES section of the `flex' input contains a series of rules of
-the form:
-
-     pattern   action
-
-where the pattern must be unindented and the action must begin on the
-same line.
-
-   See below for a further description of patterns and actions.
-
-   Finally, the user code section is simply copied to `lex.yy.c'
-verbatim.  It is used for companion routines which call or are called
-by the scanner.  The presence of this section is optional; if it is
-missing, the second `%%' in the input file may be skipped, too.
-
-   In the definitions and rules sections, any *indented* text or text
-enclosed in `%{' and `%}' is copied verbatim to the output (with the
-`%{}''s removed).  The `%{}''s must appear unindented on lines by
-themselves.
-
-   In the rules section, any indented or %{} text appearing before the
-first rule may be used to declare variables which are local to the
-scanning routine and (after the declarations) code which is to be
-executed whenever the scanning routine is entered.  Other indented or
-%{} text in the rule section is still copied to the output, but its
-meaning is not well-defined and it may well cause compile-time errors
-(this feature is present for `POSIX' compliance; see below for other
-such features).
-
-   In the definitions section (but not in the rules section), an
-unindented comment (i.e., a line beginning with "/*") is also copied
-verbatim to the output up to the next "*/".
-
-
-File: flex.info,  Node: Patterns,  Next: Matching,  Prev: Format,  Up: Top
-
-Patterns
-========
-
-   The patterns in the input are written using an extended set of
-regular expressions.  These are:
-
-`x'
-     match the character `x'
-
-`.'
-     any character (byte) except newline
-
-`[xyz]'
-     a "character class"; in this case, the pattern matches either an
-     `x', a `y', or a `z'
-
-`[abj-oZ]'
-     a "character class" with a range in it; matches an `a', a `b', any
-     letter from `j' through `o', or a `Z'
-
-`[^A-Z]'
-     a "negated character class", i.e., any character but those in the
-     class.  In this case, any character EXCEPT an uppercase letter.
-
-`[^A-Z\n]'
-     any character EXCEPT an uppercase letter or a newline
-
-`R*'
-     zero or more R's, where R is any regular expression
-
-`R+'
-     one or more R's
-
-`R?'
-     zero or one R's (that is, "an optional R")
-
-`R{2,5}'
-     anywhere from two to five R's
-
-`R{2,}'
-     two or more R's
-
-`R{4}'
-     exactly 4 R's
-
-`{NAME}'
-     the expansion of the "NAME" definition (see above)
-
-`"[xyz]\"foo"'
-     the literal string: `[xyz]"foo'
-
-`\X'
-     if X is an `a', `b', `f', `n', `r', `t', or `v', then the ANSI-C
-     interpretation of \X.  Otherwise, a literal `X' (used to escape
-     operators such as `*')
-
-`\0'
-     a NUL character (ASCII code 0)
-
-`\123'
-     the character with octal value 123
-
-`\x2a'
-     the character with hexadecimal value `2a'
-
-`(R)'
-     match an R; parentheses are used to override precedence (see below)
-
-`RS'
-     the regular expression R followed by the regular expression S;
-     called "concatenation"
-
-`R|S'
-     either an R or an S
-
-`R/S'
-     an R but only if it is followed by an S.  The text matched by S is
-     included when determining whether this rule is the "longest
-     match", but is then returned to the input before the action is
-     executed.  So the action only sees the text matched by R.  This
-     type of pattern is called "trailing context".  (There are some
-     combinations of `R/S' that `flex' cannot match correctly; see
-     notes in the Deficiencies / Bugs section below regarding
-     "dangerous trailing context".)
-
-`^R'
-     an R, but only at the beginning of a line (i.e., which just
-     starting to scan, or right after a newline has been scanned).
-
-`R$'
-     an R, but only at the end of a line (i.e., just before a newline).
-     Equivalent to "R/\n".
-
-     Note that flex's notion of "newline" is exactly whatever the C
-     compiler used to compile flex interprets '\n' as; in particular,
-     on some DOS systems you must either filter out \r's in the input
-     yourself, or explicitly use R/\r\n for "r$".
-
-`<S>R'
-     an R, but only in start condition S (see below for discussion of
-     start conditions) <S1,S2,S3>R same, but in any of start conditions
-     S1, S2, or S3
-
-`<*>R'
-     an R in any start condition, even an exclusive one.
-
-`<<EOF>>'
-     an end-of-file <S1,S2><<EOF>> an end-of-file when in start
-     condition S1 or S2
-
-   Note that inside of a character class, all regular expression
-operators lose their special meaning except escape ('\') and the
-character class operators, '-', ']', and, at the beginning of the
-class, '^'.
-
-   The regular expressions listed above are grouped according to
-precedence, from highest precedence at the top to lowest at the bottom.
-Those grouped together have equal precedence.  For example,
-
-     foo|bar*
-
-is the same as
-
-     (foo)|(ba(r*))
-
-since the '*' operator has higher precedence than concatenation, and
-concatenation higher than alternation ('|').  This pattern therefore
-matches *either* the string "foo" *or* the string "ba" followed by
-zero-or-more r's.  To match "foo" or zero-or-more "bar"'s, use:
-
-     foo|(bar)*
-
-and to match zero-or-more "foo"'s-or-"bar"'s:
-
-     (foo|bar)*
-
-   In addition to characters and ranges of characters, character
-classes can also contain character class "expressions".  These are
-expressions enclosed inside `[': and `:'] delimiters (which themselves
-must appear between the '[' and ']' of the character class; other
-elements may occur inside the character class, too).  The valid
-expressions are:
-
-     [:alnum:] [:alpha:] [:blank:]
-     [:cntrl:] [:digit:] [:graph:]
-     [:lower:] [:print:] [:punct:]
-     [:space:] [:upper:] [:xdigit:]
-
-   These expressions all designate a set of characters equivalent to
-the corresponding standard C `isXXX' function.  For example,
-`[:alnum:]' designates those characters for which `isalnum()' returns
-true - i.e., any alphabetic or numeric.  Some systems don't provide
-`isblank()', so flex defines `[:blank:]' as a blank or a tab.
-
-   For example, the following character classes are all equivalent:
-
-     [[:alnum:]]
-     [[:alpha:][:digit:]
-     [[:alpha:]0-9]
-     [a-zA-Z0-9]
-
-   If your scanner is case-insensitive (the `-i' flag), then
-`[:upper:]' and `[:lower:]' are equivalent to `[:alpha:]'.
-
-   Some notes on patterns:
-
-   - A negated character class such as the example "[^A-Z]" above *will
-     match a newline* unless "\n" (or an equivalent escape sequence) is
-     one of the characters explicitly present in the negated character
-     class (e.g., "[^A-Z\n]").  This is unlike how many other regular
-     expression tools treat negated character classes, but
-     unfortunately the inconsistency is historically entrenched.
-     Matching newlines means that a pattern like [^"]* can match the
-     entire input unless there's another quote in the input.
-
-   - A rule can have at most one instance of trailing context (the '/'
-     operator or the '$' operator).  The start condition, '^', and
-     "<<EOF>>" patterns can only occur at the beginning of a pattern,
-     and, as well as with '/' and '$', cannot be grouped inside
-     parentheses.  A '^' which does not occur at the beginning of a
-     rule or a '$' which does not occur at the end of a rule loses its
-     special properties and is treated as a normal character.
-
-     The following are illegal:
-
-          foo/bar$
-          <sc1>foo<sc2>bar
-
-     Note that the first of these, can be written "foo/bar\n".
-
-     The following will result in '$' or '^' being treated as a normal
-     character:
-
-          foo|(bar$)
-          foo|^bar
-
-     If what's wanted is a "foo" or a bar-followed-by-a-newline, the
-     following could be used (the special '|' action is explained
-     below):
-
-          foo      |
-          bar$     /* action goes here */
-
-     A similar trick will work for matching a foo or a
-     bar-at-the-beginning-of-a-line.
-
-
-File: flex.info,  Node: Matching,  Next: Actions,  Prev: Patterns,  Up: Top
-
-How the input is matched
-========================
-
-   When the generated scanner is run, it analyzes its input looking for
-strings which match any of its patterns.  If it finds more than one
-match, it takes the one matching the most text (for trailing context
-rules, this includes the length of the trailing part, even though it
-will then be returned to the input).  If it finds two or more matches
-of the same length, the rule listed first in the `flex' input file is
-chosen.
-
-   Once the match is determined, the text corresponding to the match
-(called the TOKEN) is made available in the global character pointer
-`yytext', and its length in the global integer `yyleng'.  The ACTION
-corresponding to the matched pattern is then executed (a more detailed
-description of actions follows), and then the remaining input is
-scanned for another match.
-
-   If no match is found, then the "default rule" is executed: the next
-character in the input is considered matched and copied to the standard
-output.  Thus, the simplest legal `flex' input is:
-
-     %%
-
-   which generates a scanner that simply copies its input (one
-character at a time) to its output.
-
-   Note that `yytext' can be defined in two different ways: either as a
-character *pointer* or as a character *array*.  You can control which
-definition `flex' uses by including one of the special directives
-`%pointer' or `%array' in the first (definitions) section of your flex
-input.  The default is `%pointer', unless you use the `-l' lex
-compatibility option, in which case `yytext' will be an array.  The
-advantage of using `%pointer' is substantially faster scanning and no
-buffer overflow when matching very large tokens (unless you run out of
-dynamic memory).  The disadvantage is that you are restricted in how
-your actions can modify `yytext' (see the next section), and calls to
-the `unput()' function destroys the present contents of `yytext', which
-can be a considerable porting headache when moving between different
-`lex' versions.
-
-   The advantage of `%array' is that you can then modify `yytext' to
-your heart's content, and calls to `unput()' do not destroy `yytext'
-(see below).  Furthermore, existing `lex' programs sometimes access
-`yytext' externally using declarations of the form:
-     extern char yytext[];
-   This definition is erroneous when used with `%pointer', but correct
-for `%array'.
-
-   `%array' defines `yytext' to be an array of `YYLMAX' characters,
-which defaults to a fairly large value.  You can change the size by
-simply #define'ing `YYLMAX' to a different value in the first section
-of your `flex' input.  As mentioned above, with `%pointer' yytext grows
-dynamically to accommodate large tokens.  While this means your
-`%pointer' scanner can accommodate very large tokens (such as matching
-entire blocks of comments), bear in mind that each time the scanner
-must resize `yytext' it also must rescan the entire token from the
-beginning, so matching such tokens can prove slow.  `yytext' presently
-does *not* dynamically grow if a call to `unput()' results in too much
-text being pushed back; instead, a run-time error results.
-
-   Also note that you cannot use `%array' with C++ scanner classes (the
-`c++' option; see below).
-
-
-File: flex.info,  Node: Actions,  Next: Generated scanner,  Prev: Matching,  Up: Top
-
-Actions
-=======
-
-   Each pattern in a rule has a corresponding action, which can be any
-arbitrary C statement.  The pattern ends at the first non-escaped
-whitespace character; the remainder of the line is its action.  If the
-action is empty, then when the pattern is matched the input token is
-simply discarded.  For example, here is the specification for a program
-which deletes all occurrences of "zap me" from its input:
-
-     %%
-     "zap me"
-
-   (It will copy all other characters in the input to the output since
-they will be matched by the default rule.)
-
-   Here is a program which compresses multiple blanks and tabs down to
-a single blank, and throws away whitespace found at the end of a line:
-
-     %%
-     [ \t]+        putchar( ' ' );
-     [ \t]+$       /* ignore this token */
-
-   If the action contains a '{', then the action spans till the
-balancing '}' is found, and the action may cross multiple lines.
-`flex' knows about C strings and comments and won't be fooled by braces
-found within them, but also allows actions to begin with `%{' and will
-consider the action to be all the text up to the next `%}' (regardless
-of ordinary braces inside the action).
-
-   An action consisting solely of a vertical bar ('|') means "same as
-the action for the next rule." See below for an illustration.
-
-   Actions can include arbitrary C code, including `return' statements
-to return a value to whatever routine called `yylex()'.  Each time
-`yylex()' is called it continues processing tokens from where it last
-left off until it either reaches the end of the file or executes a
-return.
-
-   Actions are free to modify `yytext' except for lengthening it
-(adding characters to its end-these will overwrite later characters in
-the input stream).  This however does not apply when using `%array'
-(see above); in that case, `yytext' may be freely modified in any way.
-
-   Actions are free to modify `yyleng' except they should not do so if
-the action also includes use of `yymore()' (see below).
-
-   There are a number of special directives which can be included
-within an action:
-
-   - `ECHO' copies yytext to the scanner's output.
-
-   - `BEGIN' followed by the name of a start condition places the
-     scanner in the corresponding start condition (see below).
-
-   - `REJECT' directs the scanner to proceed on to the "second best"
-     rule which matched the input (or a prefix of the input).  The rule
-     is chosen as described above in "How the Input is Matched", and
-     `yytext' and `yyleng' set up appropriately.  It may either be one
-     which matched as much text as the originally chosen rule but came
-     later in the `flex' input file, or one which matched less text.
-     For example, the following will both count the words in the input
-     and call the routine special() whenever "frob" is seen:
-
-                  int word_count = 0;
-          %%
-          
-          frob        special(); REJECT;
-          [^ \t\n]+   ++word_count;
-
-     Without the `REJECT', any "frob"'s in the input would not be
-     counted as words, since the scanner normally executes only one
-     action per token.  Multiple `REJECT's' are allowed, each one
-     finding the next best choice to the currently active rule.  For
-     example, when the following scanner scans the token "abcd", it
-     will write "abcdabcaba" to the output:
-
-          %%
-          a        |
-          ab       |
-          abc      |
-          abcd     ECHO; REJECT;
-          .|\n     /* eat up any unmatched character */
-
-     (The first three rules share the fourth's action since they use
-     the special '|' action.)  `REJECT' is a particularly expensive
-     feature in terms of scanner performance; if it is used in *any* of
-     the scanner's actions it will slow down *all* of the scanner's
-     matching.  Furthermore, `REJECT' cannot be used with the `-Cf' or
-     `-CF' options (see below).
-
-     Note also that unlike the other special actions, `REJECT' is a
-     *branch*; code immediately following it in the action will *not*
-     be executed.
-
-   - `yymore()' tells the scanner that the next time it matches a rule,
-     the corresponding token should be *appended* onto the current
-     value of `yytext' rather than replacing it.  For example, given
-     the input "mega-kludge" the following will write
-     "mega-mega-kludge" to the output:
-
-          %%
-          mega-    ECHO; yymore();
-          kludge   ECHO;
-
-     First "mega-" is matched and echoed to the output.  Then "kludge"
-     is matched, but the previous "mega-" is still hanging around at
-     the beginning of `yytext' so the `ECHO' for the "kludge" rule will
-     actually write "mega-kludge".
-
-   Two notes regarding use of `yymore()'.  First, `yymore()' depends on
-the value of `yyleng' correctly reflecting the size of the current
-token, so you must not modify `yyleng' if you are using `yymore()'.
-Second, the presence of `yymore()' in the scanner's action entails a
-minor performance penalty in the scanner's matching speed.
-
-   - `yyless(n)' returns all but the first N characters of the current
-     token back to the input stream, where they will be rescanned when
-     the scanner looks for the next match.  `yytext' and `yyleng' are
-     adjusted appropriately (e.g., `yyleng' will now be equal to N ).
-     For example, on the input "foobar" the following will write out
-     "foobarbar":
-
-          %%
-          foobar    ECHO; yyless(3);
-          [a-z]+    ECHO;
-
-     An argument of 0 to `yyless' will cause the entire current input
-     string to be scanned again.  Unless you've changed how the scanner
-     will subsequently process its input (using `BEGIN', for example),
-     this will result in an endless loop.
-
-     Note that `yyless' is a macro and can only be used in the flex
-     input file, not from other source files.
-
-   - `unput(c)' puts the character `c' back onto the input stream.  It
-     will be the next character scanned.  The following action will
-     take the current token and cause it to be rescanned enclosed in
-     parentheses.
-
-          {
-          int i;
-          /* Copy yytext because unput() trashes yytext */
-          char *yycopy = strdup( yytext );
-          unput( ')' );
-          for ( i = yyleng - 1; i >= 0; --i )
-              unput( yycopy[i] );
-          unput( '(' );
-          free( yycopy );
-          }
-
-     Note that since each `unput()' puts the given character back at
-     the *beginning* of the input stream, pushing back strings must be
-     done back-to-front.  An important potential problem when using
-     `unput()' is that if you are using `%pointer' (the default), a
-     call to `unput()' *destroys* the contents of `yytext', starting
-     with its rightmost character and devouring one character to the
-     left with each call.  If you need the value of yytext preserved
-     after a call to `unput()' (as in the above example), you must
-     either first copy it elsewhere, or build your scanner using
-     `%array' instead (see How The Input Is Matched).
-
-     Finally, note that you cannot put back `EOF' to attempt to mark
-     the input stream with an end-of-file.
-
-   - `input()' reads the next character from the input stream.  For
-     example, the following is one way to eat up C comments:
-
-          %%
-          "/*"        {
-                      register int c;
-          
-                      for ( ; ; )
-                          {
-                          while ( (c = input()) != '*' &&
-                                  c != EOF )
-                              ;    /* eat up text of comment */
-          
-                          if ( c == '*' )
-                              {
-                              while ( (c = input()) == '*' )
-                                  ;
-                              if ( c == '/' )
-                                  break;    /* found the end */
-                              }
-          
-                          if ( c == EOF )
-                              {
-                              error( "EOF in comment" );
-                              break;
-                              }
-                          }
-                      }
-
-     (Note that if the scanner is compiled using `C++', then `input()'
-     is instead referred to as `yyinput()', in order to avoid a name
-     clash with the `C++' stream by the name of `input'.)
-
-   - YY_FLUSH_BUFFER flushes the scanner's internal buffer so that the
-     next time the scanner attempts to match a token, it will first
-     refill the buffer using `YY_INPUT' (see The Generated Scanner,
-     below).  This action is a special case of the more general
-     `yy_flush_buffer()' function, described below in the section
-     Multiple Input Buffers.
-
-   - `yyterminate()' can be used in lieu of a return statement in an
-     action.  It terminates the scanner and returns a 0 to the
-     scanner's caller, indicating "all done".  By default,
-     `yyterminate()' is also called when an end-of-file is encountered.
-     It is a macro and may be redefined.
-
-
-File: flex.info,  Node: Generated scanner,  Next: Start conditions,  Prev: Actions,  Up: Top
-
-The generated scanner
-=====================
-
-   The output of `flex' is the file `lex.yy.c', which contains the
-scanning routine `yylex()', a number of tables used by it for matching
-tokens, and a number of auxiliary routines and macros.  By default,
-`yylex()' is declared as follows:
-
-     int yylex()
-         {
-         ... various definitions and the actions in here ...
-         }
-
-   (If your environment supports function prototypes, then it will be
-"int yylex( void  )".)   This  definition  may  be changed by defining
-the "YY_DECL" macro.  For example, you could use:
-
-     #define YY_DECL float lexscan( a, b ) float a, b;
-
-   to give the scanning routine the name `lexscan', returning a float,
-and taking two floats as arguments.  Note that if you give arguments to
-the scanning routine using a K&R-style/non-prototyped function
-declaration, you must terminate the definition with a semi-colon (`;').
-
-   Whenever `yylex()' is called, it scans tokens from the global input
-file `yyin' (which defaults to stdin).  It continues until it either
-reaches an end-of-file (at which point it returns the value 0) or one
-of its actions executes a `return' statement.
-
-   If the scanner reaches an end-of-file, subsequent calls are undefined
-unless either `yyin' is pointed at a new input file (in which case
-scanning continues from that file), or `yyrestart()' is called.
-`yyrestart()' takes one argument, a `FILE *' pointer (which can be nil,
-if you've set up `YY_INPUT' to scan from a source other than `yyin'),
-and initializes `yyin' for scanning from that file.  Essentially there
-is no difference between just assigning `yyin' to a new input file or
-using `yyrestart()' to do so; the latter is available for compatibility
-with previous versions of `flex', and because it can be used to switch
-input files in the middle of scanning.  It can also be used to throw
-away the current input buffer, by calling it with an argument of
-`yyin'; but better is to use `YY_FLUSH_BUFFER' (see above).  Note that
-`yyrestart()' does *not* reset the start condition to `INITIAL' (see
-Start Conditions, below).
-
-   If `yylex()' stops scanning due to executing a `return' statement in
-one of the actions, the scanner may then be called again and it will
-resume scanning where it left off.
-
-   By default (and for purposes of efficiency), the scanner uses
-block-reads rather than simple `getc()' calls to read characters from
-`yyin'.  The nature of how it gets its input can be controlled by
-defining the `YY_INPUT' macro.  YY_INPUT's calling sequence is
-"YY_INPUT(buf,result,max_size)".  Its action is to place up to MAX_SIZE
-characters in the character array BUF and return in the integer
-variable RESULT either the number of characters read or the constant
-YY_NULL (0 on Unix systems) to indicate EOF.  The default YY_INPUT
-reads from the global file-pointer "yyin".
-
-   A sample definition of YY_INPUT (in the definitions section of the
-input file):
-
-     %{
-     #define YY_INPUT(buf,result,max_size) \
-         { \
-         int c = getchar(); \
-         result = (c == EOF) ? YY_NULL : (buf[0] = c, 1); \
-         }
-     %}
-
-   This definition will change the input processing to occur one
-character at a time.
-
-   When the scanner receives an end-of-file indication from YY_INPUT,
-it then checks the `yywrap()' function.  If `yywrap()' returns false
-(zero), then it is assumed that the function has gone ahead and set up
-`yyin' to point to another input file, and scanning continues.  If it
-returns true (non-zero), then the scanner terminates, returning 0 to
-its caller.  Note that in either case, the start condition remains
-unchanged; it does *not* revert to `INITIAL'.
-
-   If you do not supply your own version of `yywrap()', then you must
-either use `%option noyywrap' (in which case the scanner behaves as
-though `yywrap()' returned 1), or you must link with `-lfl' to obtain
-the default version of the routine, which always returns 1.
-
-   Three routines are available for scanning from in-memory buffers
-rather than files: `yy_scan_string()', `yy_scan_bytes()', and
-`yy_scan_buffer()'.  See the discussion of them below in the section
-Multiple Input Buffers.
-
-   The scanner writes its `ECHO' output to the `yyout' global (default,
-stdout), which may be redefined by the user simply by assigning it to
-some other `FILE' pointer.
-
-
-File: flex.info,  Node: Start conditions,  Next: Multiple buffers,  Prev: Generated scanner,  Up: Top
-
-Start conditions
-================
-
-   `flex' provides a mechanism for conditionally activating rules.  Any
-rule whose pattern is prefixed with "<sc>" will only be active when the
-scanner is in the start condition named "sc".  For example,
-
-     <STRING>[^"]*        { /* eat up the string body ... */
-                 ...
-                 }
-
-will be active only when the scanner is in the "STRING" start
-condition, and
-
-     <INITIAL,STRING,QUOTE>\.        { /* handle an escape ... */
-                 ...
-                 }
-
-will be active only when the current start condition is either
-"INITIAL", "STRING", or "QUOTE".
-
-   Start conditions are declared in the definitions (first) section of
-the input using unindented lines beginning with either `%s' or `%x'
-followed by a list of names.  The former declares *inclusive* start
-conditions, the latter *exclusive* start conditions.  A start condition
-is activated using the `BEGIN' action.  Until the next `BEGIN' action is
-executed, rules with the given start condition will be active and rules
-with other start conditions will be inactive.  If the start condition
-is *inclusive*, then rules with no start conditions at all will also be
-active.  If it is *exclusive*, then *only* rules qualified with the
-start condition will be active.  A set of rules contingent on the same
-exclusive start condition describe a scanner which is independent of
-any of the other rules in the `flex' input.  Because of this, exclusive
-start conditions make it easy to specify "mini-scanners" which scan
-portions of the input that are syntactically different from the rest
-(e.g., comments).
-
-   If the distinction between inclusive and exclusive start conditions
-is still a little vague, here's a simple example illustrating the
-connection between the two.  The set of rules:
-
-     %s example
-     %%
-     
-     <example>foo   do_something();
-     
-     bar            something_else();
-
-is equivalent to
-
-     %x example
-     %%
-     
-     <example>foo   do_something();
-     
-     <INITIAL,example>bar    something_else();
-
-   Without the `<INITIAL,example>' qualifier, the `bar' pattern in the
-second example wouldn't be active (i.e., couldn't match) when in start
-condition `example'.  If we just used `<example>' to qualify `bar',
-though, then it would only be active in `example' and not in `INITIAL',
-while in the first example it's active in both, because in the first
-example the `example' starting condition is an *inclusive* (`%s') start
-condition.
-
-   Also note that the special start-condition specifier `<*>' matches
-every start condition.  Thus, the above example could also have been
-written;
-
-     %x example
-     %%
-     
-     <example>foo   do_something();
-     
-     <*>bar    something_else();
-
-   The default rule (to `ECHO' any unmatched character) remains active
-in start conditions.  It is equivalent to:
-
-     <*>.|\\n     ECHO;
-
-   `BEGIN(0)' returns to the original state where only the rules with
-no start conditions are active.  This state can also be referred to as
-the start-condition "INITIAL", so `BEGIN(INITIAL)' is equivalent to
-`BEGIN(0)'.  (The parentheses around the start condition name are not
-required but are considered good style.)
-
-   `BEGIN' actions can also be given as indented code at the beginning
-of the rules section.  For example, the following will cause the
-scanner to enter the "SPECIAL" start condition whenever `yylex()' is
-called and the global variable `enter_special' is true:
-
-             int enter_special;
-     
-     %x SPECIAL
-     %%
-             if ( enter_special )
-                 BEGIN(SPECIAL);
-     
-     <SPECIAL>blahblahblah
-     ...more rules follow...
-
-   To illustrate the uses of start conditions, here is a scanner which
-provides two different interpretations of a string like "123.456".  By
-default it will treat it as as three tokens, the integer "123", a dot
-('.'), and the integer "456".  But if the string is preceded earlier in
-the line by the string "expect-floats" it will treat it as a single
-token, the floating-point number 123.456:
-
-     %{
-     #include <math.h>
-     %}
-     %s expect
-     
-     %%
-     expect-floats        BEGIN(expect);
-     
-     <expect>[0-9]+"."[0-9]+      {
-                 printf( "found a float, = %f\n",
-                         atof( yytext ) );
-                 }
-     <expect>\n           {
-                 /* that's the end of the line, so
-                  * we need another "expect-number"
-                  * before we'll recognize any more
-                  * numbers
-                  */
-                 BEGIN(INITIAL);
-                 }
-     
-     [0-9]+      {
-     
-     Version 2.5               December 1994                        18
-     
-                 printf( "found an integer, = %d\n",
-                         atoi( yytext ) );
-                 }
-     
-     "."         printf( "found a dot\n" );
-
-   Here is a scanner which recognizes (and discards) C comments while
-maintaining a count of the current input line.
-
-     %x comment
-     %%
-             int line_num = 1;
-     
-     "/*"         BEGIN(comment);
-     
-     <comment>[^*\n]*        /* eat anything that's not a '*' */
-     <comment>"*"+[^*/\n]*   /* eat up '*'s not followed by '/'s */
-     <comment>\n             ++line_num;
-     <comment>"*"+"/"        BEGIN(INITIAL);
-
-   This scanner goes to a bit of trouble to match as much text as
-possible with each rule.  In general, when attempting to write a
-high-speed scanner try to match as much possible in each rule, as it's
-a big win.
-
-   Note that start-conditions names are really integer values and can
-be stored as such.  Thus, the above could be extended in the following
-fashion:
-
-     %x comment foo
-     %%
-             int line_num = 1;
-             int comment_caller;
-     
-     "/*"         {
-                  comment_caller = INITIAL;
-                  BEGIN(comment);
-                  }
-     
-     ...
-     
-     <foo>"/*"    {
-                  comment_caller = foo;
-                  BEGIN(comment);
-                  }
-     
-     <comment>[^*\n]*        /* eat anything that's not a '*' */
-     <comment>"*"+[^*/\n]*   /* eat up '*'s not followed by '/'s */
-     <comment>\n             ++line_num;
-     <comment>"*"+"/"        BEGIN(comment_caller);
-
-   Furthermore, you can access the current start condition using the
-integer-valued `YY_START' macro.  For example, the above assignments to
-`comment_caller' could instead be written
-
-     comment_caller = YY_START;
-
-   Flex provides `YYSTATE' as an alias for `YY_START' (since that is
-what's used by AT&T `lex').
-
-   Note that start conditions do not have their own name-space; %s's
-and %x's declare names in the same fashion as #define's.
-
-   Finally, here's an example of how to match C-style quoted strings
-using exclusive start conditions, including expanded escape sequences
-(but not including checking for a string that's too long):
-
-     %x str
-     
-     %%
-             char string_buf[MAX_STR_CONST];
-             char *string_buf_ptr;
-     
-     \"      string_buf_ptr = string_buf; BEGIN(str);
-     
-     <str>\"        { /* saw closing quote - all done */
-             BEGIN(INITIAL);
-             *string_buf_ptr = '\0';
-             /* return string constant token type and
-              * value to parser
-              */
-             }
-     
-     <str>\n        {
-             /* error - unterminated string constant */
-             /* generate error message */
-             }
-     
-     <str>\\[0-7]{1,3} {
-             /* octal escape sequence */
-             int result;
-     
-             (void) sscanf( yytext + 1, "%o", &result );
-     
-             if ( result > 0xff )
-                     /* error, constant is out-of-bounds */
-     
-             *string_buf_ptr++ = result;
-             }
-     
-     <str>\\[0-9]+ {
-             /* generate error - bad escape sequence; something
-              * like '\48' or '\0777777'
-              */
-             }
-     
-     <str>\\n  *string_buf_ptr++ = '\n';
-     <str>\\t  *string_buf_ptr++ = '\t';
-     <str>\\r  *string_buf_ptr++ = '\r';
-     <str>\\b  *string_buf_ptr++ = '\b';
-     <str>\\f  *string_buf_ptr++ = '\f';
-     
-     <str>\\(.|\n)  *string_buf_ptr++ = yytext[1];
-     
-     <str>[^\\\n\"]+        {
-             char *yptr = yytext;
-     
-             while ( *yptr )
-                     *string_buf_ptr++ = *yptr++;
-             }
-
-   Often, such as in some of the examples above, you wind up writing a
-whole bunch of rules all preceded by the same start condition(s).  Flex
-makes this a little easier and cleaner by introducing a notion of start
-condition "scope".  A start condition scope is begun with:
-
-     <SCs>{
-
-where SCs is a list of one or more start conditions.  Inside the start
-condition scope, every rule automatically has the prefix `<SCs>'
-applied to it, until a `}' which matches the initial `{'.  So, for
-example,
-
-     <ESC>{
-         "\\n"   return '\n';
-         "\\r"   return '\r';
-         "\\f"   return '\f';
-         "\\0"   return '\0';
-     }
-
-is equivalent to:
-
-     <ESC>"\\n"  return '\n';
-     <ESC>"\\r"  return '\r';
-     <ESC>"\\f"  return '\f';
-     <ESC>"\\0"  return '\0';
-
-   Start condition scopes may be nested.
-
-   Three routines are available for manipulating stacks of start
-conditions:
-
-`void yy_push_state(int new_state)'
-     pushes the current start condition onto the top of the start
-     condition stack and switches to NEW_STATE as though you had used
-     `BEGIN new_state' (recall that start condition names are also
-     integers).
-
-`void yy_pop_state()'
-     pops the top of the stack and switches to it via `BEGIN'.
-
-`int yy_top_state()'
-     returns the top of the stack without altering the stack's contents.
-
-   The start condition stack grows dynamically and so has no built-in
-size limitation.  If memory is exhausted, program execution aborts.
-
-   To use start condition stacks, your scanner must include a `%option
-stack' directive (see Options below).
-
-
-File: flex.info,  Node: Multiple buffers,  Next: End-of-file rules,  Prev: Start conditions,  Up: Top
-
-Multiple input buffers
-======================
-
-   Some scanners (such as those which support "include" files) require
-reading from several input streams.  As `flex' scanners do a large
-amount of buffering, one cannot control where the next input will be
-read from by simply writing a `YY_INPUT' which is sensitive to the
-scanning context.  `YY_INPUT' is only called when the scanner reaches
-the end of its buffer, which may be a long time after scanning a
-statement such as an "include" which requires switching the input
-source.
-
-   To negotiate these sorts of problems, `flex' provides a mechanism
-for creating and switching between multiple input buffers.  An input
-buffer is created by using:
-
-     YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
-
-which takes a `FILE' pointer and a size and creates a buffer associated
-with the given file and large enough to hold SIZE characters (when in
-doubt, use `YY_BUF_SIZE' for the size).  It returns a `YY_BUFFER_STATE'
-handle, which may then be passed to other routines (see below).  The
-`YY_BUFFER_STATE' type is a pointer to an opaque `struct'
-`yy_buffer_state' structure, so you may safely initialize
-YY_BUFFER_STATE variables to `((YY_BUFFER_STATE) 0)' if you wish, and
-also refer to the opaque structure in order to correctly declare input
-buffers in source files other than that of your scanner.  Note that the
-`FILE' pointer in the call to `yy_create_buffer' is only used as the
-value of `yyin' seen by `YY_INPUT'; if you redefine `YY_INPUT' so it no
-longer uses `yyin', then you can safely pass a nil `FILE' pointer to
-`yy_create_buffer'.  You select a particular buffer to scan from using:
-
-     void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
-
-   switches the scanner's input buffer so subsequent tokens will come
-from NEW_BUFFER.  Note that `yy_switch_to_buffer()' may be used by
-`yywrap()' to set things up for continued scanning, instead of opening
-a new file and pointing `yyin' at it.  Note also that switching input
-sources via either `yy_switch_to_buffer()' or `yywrap()' does *not*
-change the start condition.
-
-     void yy_delete_buffer( YY_BUFFER_STATE buffer )
-
-is used to reclaim the storage associated with a buffer.  You can also
-clear the current contents of a buffer using:
-
-     void yy_flush_buffer( YY_BUFFER_STATE buffer )
-
-   This function discards the buffer's contents, so the next time the
-scanner attempts to match a token from the buffer, it will first fill
-the buffer anew using `YY_INPUT'.
-
-   `yy_new_buffer()' is an alias for `yy_create_buffer()', provided for
-compatibility with the C++ use of `new' and `delete' for creating and
-destroying dynamic objects.
-
-   Finally, the `YY_CURRENT_BUFFER' macro returns a `YY_BUFFER_STATE'
-handle to the current buffer.
-
-   Here is an example of using these features for writing a scanner
-which expands include files (the `<<EOF>>' feature is discussed below):
-
-     /* the "incl" state is used for picking up the name
-      * of an include file
-      */
-     %x incl
-     
-     %{
-     #define MAX_INCLUDE_DEPTH 10
-     YY_BUFFER_STATE include_stack[MAX_INCLUDE_DEPTH];
-     int include_stack_ptr = 0;
-     %}
-     
-     %%
-     include             BEGIN(incl);
-     
-     [a-z]+              ECHO;
-     [^a-z\n]*\n?        ECHO;
-     
-     <incl>[ \t]*      /* eat the whitespace */
-     <incl>[^ \t\n]+   { /* got the include file name */
-             if ( include_stack_ptr >= MAX_INCLUDE_DEPTH )
-                 {
-                 fprintf( stderr, "Includes nested too deeply" );
-                 exit( 1 );
-                 }
-     
-             include_stack[include_stack_ptr++] =
-                 YY_CURRENT_BUFFER;
-     
-             yyin = fopen( yytext, "r" );
-     
-             if ( ! yyin )
-                 error( ... );
-     
-             yy_switch_to_buffer(
-                 yy_create_buffer( yyin, YY_BUF_SIZE ) );
-     
-             BEGIN(INITIAL);
-             }
-     
-     <<EOF>> {
-             if ( --include_stack_ptr < 0 )
-                 {
-                 yyterminate();
-                 }
-     
-             else
-                 {
-                 yy_delete_buffer( YY_CURRENT_BUFFER );
-                 yy_switch_to_buffer(
-                      include_stack[include_stack_ptr] );
-                 }
-             }
-
-   Three routines are available for setting up input buffers for
-scanning in-memory strings instead of files.  All of them create a new
-input buffer for scanning the string, and return a corresponding
-`YY_BUFFER_STATE' handle (which you should delete with
-`yy_delete_buffer()' when done with it).  They also switch to the new
-buffer using `yy_switch_to_buffer()', so the next call to `yylex()' will
-start scanning the string.
-
-`yy_scan_string(const char *str)'
-     scans a NUL-terminated string.
-
-`yy_scan_bytes(const char *bytes, int len)'
-     scans `len' bytes (including possibly NUL's) starting at location
-     BYTES.
-
-   Note that both of these functions create and scan a *copy* of the
-string or bytes.  (This may be desirable, since `yylex()' modifies the
-contents of the buffer it is scanning.) You can avoid the copy by using:
-
-`yy_scan_buffer(char *base, yy_size_t size)'
-     which scans in place the buffer starting at BASE, consisting of
-     SIZE bytes, the last two bytes of which *must* be
-     `YY_END_OF_BUFFER_CHAR' (ASCII NUL).  These last two bytes are not
-     scanned; thus, scanning consists of `base[0]' through
-     `base[size-2]', inclusive.
-
-     If you fail to set up BASE in this manner (i.e., forget the final
-     two `YY_END_OF_BUFFER_CHAR' bytes), then `yy_scan_buffer()'
-     returns a nil pointer instead of creating a new input buffer.
-
-     The type `yy_size_t' is an integral type to which you can cast an
-     integer expression reflecting the size of the buffer.
-
-
-File: flex.info,  Node: End-of-file rules,  Next: Miscellaneous,  Prev: Multiple buffers,  Up: Top
-
-End-of-file rules
-=================
-
-   The special rule "<<EOF>>" indicates actions which are to be taken
-when an end-of-file is encountered and yywrap() returns non-zero (i.e.,
-indicates no further files to process).  The action must finish by
-doing one of four things:
-
-   - assigning `yyin' to a new input file (in previous versions of
-     flex, after doing the assignment you had to call the special
-     action `YY_NEW_FILE'; this is no longer necessary);
-
-   - executing a `return' statement;
-
-   - executing the special `yyterminate()' action;
-
-   - or, switching to a new buffer using `yy_switch_to_buffer()' as
-     shown in the example above.
-
-   <<EOF>> rules may not be used with other patterns; they may only be
-qualified with a list of start conditions.  If an unqualified <<EOF>>
-rule is given, it applies to *all* start conditions which do not
-already have <<EOF>> actions.  To specify an <<EOF>> rule for only the
-initial start condition, use
-
-     <INITIAL><<EOF>>
-
-   These rules are useful for catching things like unclosed comments.
-An example:
-
-     %x quote
-     %%
-     
-     ...other rules for dealing with quotes...
-     
-     <quote><<EOF>>   {
-              error( "unterminated quote" );
-              yyterminate();
-              }
-     <<EOF>>  {
-              if ( *++filelist )
-                  yyin = fopen( *filelist, "r" );
-              else
-                 yyterminate();
-              }
-
-
-File: flex.info,  Node: Miscellaneous,  Next: User variables,  Prev: End-of-file rules,  Up: Top
-
-Miscellaneous macros
-====================
-
-   The macro `YY_USER_ACTION' can be defined to provide an action which
-is always executed prior to the matched rule's action.  For example, it
-could be #define'd to call a routine to convert yytext to lower-case.
-When `YY_USER_ACTION' is invoked, the variable `yy_act' gives the
-number of the matched rule (rules are numbered starting with 1).
-Suppose you want to profile how often each of your rules is matched.
-The following would do the trick:
-
-     #define YY_USER_ACTION ++ctr[yy_act]
-
-   where `ctr' is an array to hold the counts for the different rules.
-Note that the macro `YY_NUM_RULES' gives the total number of rules
-(including the default rule, even if you use `-s', so a correct
-declaration for `ctr' is:
-
-     int ctr[YY_NUM_RULES];
-
-   The macro `YY_USER_INIT' may be defined to provide an action which
-is always executed before the first scan (and before the scanner's
-internal initializations are done).  For example, it could be used to
-call a routine to read in a data table or open a logging file.
-
-   The macro `yy_set_interactive(is_interactive)' can be used to
-control whether the current buffer is considered *interactive*.  An
-interactive buffer is processed more slowly, but must be used when the
-scanner's input source is indeed interactive to avoid problems due to
-waiting to fill buffers (see the discussion of the `-I' flag below).  A
-non-zero value in the macro invocation marks the buffer as interactive,
-a zero value as non-interactive.  Note that use of this macro overrides
-`%option always-interactive' or `%option never-interactive' (see
-Options below).  `yy_set_interactive()' must be invoked prior to
-beginning to scan the buffer that is (or is not) to be considered
-interactive.
-
-   The macro `yy_set_bol(at_bol)' can be used to control whether the
-current buffer's scanning context for the next token match is done as
-though at the beginning of a line.  A non-zero macro argument makes
-rules anchored with
-
-   The macro `YY_AT_BOL()' returns true if the next token scanned from
-the current buffer will have '^' rules active, false otherwise.
-
-   In the generated scanner, the actions are all gathered in one large
-switch statement and separated using `YY_BREAK', which may be
-redefined.  By default, it is simply a "break", to separate each rule's
-action from the following rule's.  Redefining `YY_BREAK' allows, for
-example, C++ users to #define YY_BREAK to do nothing (while being very
-careful that every rule ends with a "break" or a "return"!) to avoid
-suffering from unreachable statement warnings where because a rule's
-action ends with "return", the `YY_BREAK' is inaccessible.
-
-
-File: flex.info,  Node: User variables,  Next: YACC interface,  Prev: Miscellaneous,  Up: Top
-
-Values available to the user
-============================
-
-   This section summarizes the various values available to the user in
-the rule actions.
-
-   - `char *yytext' holds the text of the current token.  It may be
-     modified but not lengthened (you cannot append characters to the
-     end).
-
-     If the special directive `%array' appears in the first section of
-     the scanner description, then `yytext' is instead declared `char
-     yytext[YYLMAX]', where `YYLMAX' is a macro definition that you can
-     redefine in the first section if you don't like the default value
-     (generally 8KB).  Using `%array' results in somewhat slower
-     scanners, but the value of `yytext' becomes immune to calls to
-     `input()' and `unput()', which potentially destroy its value when
-     `yytext' is a character pointer.  The opposite of `%array' is
-     `%pointer', which is the default.
-
-     You cannot use `%array' when generating C++ scanner classes (the
-     `-+' flag).
-
-   - `int yyleng' holds the length of the current token.
-
-   - `FILE *yyin' is the file which by default `flex' reads from.  It
-     may be redefined but doing so only makes sense before scanning
-     begins or after an EOF has been encountered.  Changing it in the
-     midst of scanning will have unexpected results since `flex'
-     buffers its input; use `yyrestart()' instead.  Once scanning
-     terminates because an end-of-file has been seen, you can assign
-     `yyin' at the new input file and then call the scanner again to
-     continue scanning.
-
-   - `void yyrestart( FILE *new_file )' may be called to point `yyin'
-     at the new input file.  The switch-over to the new file is
-     immediate (any previously buffered-up input is lost).  Note that
-     calling `yyrestart()' with `yyin' as an argument thus throws away
-     the current input buffer and continues scanning the same input
-     file.
-
-   - `FILE *yyout' is the file to which `ECHO' actions are done.  It
-     can be reassigned by the user.
-
-   - `YY_CURRENT_BUFFER' returns a `YY_BUFFER_STATE' handle to the
-     current buffer.
-
-   - `YY_START' returns an integer value corresponding to the current
-     start condition.  You can subsequently use this value with `BEGIN'
-     to return to that start condition.
-
-
-File: flex.info,  Node: YACC interface,  Next: Options,  Prev: User variables,  Up: Top
-
-Interfacing with `yacc'
-=======================
-
-   One of the main uses of `flex' is as a companion to the `yacc'
-parser-generator.  `yacc' parsers expect to call a routine named
-`yylex()' to find the next input token.  The routine is supposed to
-return the type of the next token as well as putting any associated
-value in the global `yylval'.  To use `flex' with `yacc', one specifies
-the `-d' option to `yacc' to instruct it to generate the file `y.tab.h'
-containing definitions of all the `%tokens' appearing in the `yacc'
-input.  This file is then included in the `flex' scanner.  For example,
-if one of the tokens is "TOK_NUMBER", part of the scanner might look
-like:
-
-     %{
-     #include "y.tab.h"
-     %}
-     
-     %%
-     
-     [0-9]+        yylval = atoi( yytext ); return TOK_NUMBER;
-
-
-File: flex.info,  Node: Options,  Next: Performance,  Prev: YACC interface,  Up: Top
-
-Options
-=======
-
-   `flex' has the following options:
-
-`-b'
-     Generate backing-up information to `lex.backup'.  This is a list
-     of scanner states which require backing up and the input
-     characters on which they do so.  By adding rules one can remove
-     backing-up states.  If *all* backing-up states are eliminated and
-     `-Cf' or `-CF' is used, the generated scanner will run faster (see
-     the `-p' flag).  Only users who wish to squeeze every last cycle
-     out of their scanners need worry about this option.  (See the
-     section on Performance Considerations below.)
-
-`-c'
-     is a do-nothing, deprecated option included for POSIX compliance.
-
-`-d'
-     makes the generated scanner run in "debug" mode.  Whenever a
-     pattern is recognized and the global `yy_flex_debug' is non-zero
-     (which is the default), the scanner will write to `stderr' a line
-     of the form:
-
-          --accepting rule at line 53 ("the matched text")
-
-     The line number refers to the location of the rule in the file
-     defining the scanner (i.e., the file that was fed to flex).
-     Messages are also generated when the scanner backs up, accepts the
-     default rule, reaches the end of its input buffer (or encounters a
-     NUL; at this point, the two look the same as far as the scanner's
-     concerned), or reaches an end-of-file.
-
-`-f'
-     specifies "fast scanner".  No table compression is done and stdio
-     is bypassed.  The result is large but fast.  This option is
-     equivalent to `-Cfr' (see below).
-
-`-h'
-     generates a "help" summary of `flex's' options to `stdout' and
-     then exits.  `-?' and `--help' are synonyms for `-h'.
-
-`-i'
-     instructs `flex' to generate a *case-insensitive* scanner.  The
-     case of letters given in the `flex' input patterns will be
-     ignored, and tokens in the input will be matched regardless of
-     case.  The matched text given in `yytext' will have the preserved
-     case (i.e., it will not be folded).
-
-`-l'
-     turns on maximum compatibility with the original AT&T `lex'
-     implementation.  Note that this does not mean *full*
-     compatibility.  Use of this option costs a considerable amount of
-     performance, and it cannot be used with the `-+, -f, -F, -Cf', or
-     `-CF' options.  For details on the compatibilities it provides, see
-     the section "Incompatibilities With Lex And POSIX" below.  This
-     option also results in the name `YY_FLEX_LEX_COMPAT' being
-     #define'd in the generated scanner.
-
-`-n'
-     is another do-nothing, deprecated option included only for POSIX
-     compliance.
-
-`-p'
-     generates a performance report to stderr.  The report consists of
-     comments regarding features of the `flex' input file which will
-     cause a serious loss of performance in the resulting scanner.  If
-     you give the flag twice, you will also get comments regarding
-     features that lead to minor performance losses.
-
-     Note that the use of `REJECT', `%option yylineno' and variable
-     trailing context (see the Deficiencies / Bugs section below)
-     entails a substantial performance penalty; use of `yymore()', the
-     `^' operator, and the `-I' flag entail minor performance penalties.
-
-`-s'
-     causes the "default rule" (that unmatched scanner input is echoed
-     to `stdout') to be suppressed.  If the scanner encounters input
-     that does not match any of its rules, it aborts with an error.
-     This option is useful for finding holes in a scanner's rule set.
-
-`-t'
-     instructs `flex' to write the scanner it generates to standard
-     output instead of `lex.yy.c'.
-
-`-v'
-     specifies that `flex' should write to `stderr' a summary of
-     statistics regarding the scanner it generates.  Most of the
-     statistics are meaningless to the casual `flex' user, but the
-     first line identifies the version of `flex' (same as reported by
-     `-V'), and the next line the flags used when generating the
-     scanner, including those that are on by default.
-
-`-w'
-     suppresses warning messages.
-
-`-B'
-     instructs `flex' to generate a *batch* scanner, the opposite of
-     *interactive* scanners generated by `-I' (see below).  In general,
-     you use `-B' when you are *certain* that your scanner will never
-     be used interactively, and you want to squeeze a *little* more
-     performance out of it.  If your goal is instead to squeeze out a
-     *lot* more performance, you should be using the `-Cf' or `-CF'
-     options (discussed below), which turn on `-B' automatically anyway.
-
-`-F'
-     specifies that the "fast" scanner table representation should be
-     used (and stdio bypassed).  This representation is about as fast
-     as the full table representation `(-f)', and for some sets of
-     patterns will be considerably smaller (and for others, larger).
-     In general, if the pattern set contains both "keywords" and a
-     catch-all, "identifier" rule, such as in the set:
-
-          "case"    return TOK_CASE;
-          "switch"  return TOK_SWITCH;
-          ...
-          "default" return TOK_DEFAULT;
-          [a-z]+    return TOK_ID;
-
-     then you're better off using the full table representation.  If
-     only the "identifier" rule is present and you then use a hash
-     table or some such to detect the keywords, you're better off using
-     `-F'.
-
-     This option is equivalent to `-CFr' (see below).  It cannot be
-     used with `-+'.
-
-`-I'
-     instructs `flex' to generate an *interactive* scanner.  An
-     interactive scanner is one that only looks ahead to decide what
-     token has been matched if it absolutely must.  It turns out that
-     always looking one extra character ahead, even if the scanner has
-     already seen enough text to disambiguate the current token, is a
-     bit faster than only looking ahead when necessary.  But scanners
-     that always look ahead give dreadful interactive performance; for
-     example, when a user types a newline, it is not recognized as a
-     newline token until they enter *another* token, which often means
-     typing in another whole line.
-
-     `Flex' scanners default to *interactive* unless you use the `-Cf'
-     or `-CF' table-compression options (see below).  That's because if
-     you're looking for high-performance you should be using one of
-     these options, so if you didn't, `flex' assumes you'd rather trade
-     off a bit of run-time performance for intuitive interactive
-     behavior.  Note also that you *cannot* use `-I' in conjunction
-     with `-Cf' or `-CF'.  Thus, this option is not really needed; it
-     is on by default for all those cases in which it is allowed.
-
-     You can force a scanner to *not* be interactive by using `-B' (see
-     above).
-
-`-L'
-     instructs `flex' not to generate `#line' directives.  Without this
-     option, `flex' peppers the generated scanner with #line directives
-     so error messages in the actions will be correctly located with
-     respect to either the original `flex' input file (if the errors
-     are due to code in the input file), or `lex.yy.c' (if the errors
-     are `flex's' fault - you should report these sorts of errors to
-     the email address given below).
-
-`-T'
-     makes `flex' run in `trace' mode.  It will generate a lot of
-     messages to `stderr' concerning the form of the input and the
-     resultant non-deterministic and deterministic finite automata.
-     This option is mostly for use in maintaining `flex'.
-
-`-V'
-     prints the version number to `stdout' and exits.  `--version' is a
-     synonym for `-V'.
-
-`-7'
-     instructs `flex' to generate a 7-bit scanner, i.e., one which can
-     only recognized 7-bit characters in its input.  The advantage of
-     using `-7' is that the scanner's tables can be up to half the size
-     of those generated using the `-8' option (see below).  The
-     disadvantage is that such scanners often hang or crash if their
-     input contains an 8-bit character.
-
-     Note, however, that unless you generate your scanner using the
-     `-Cf' or `-CF' table compression options, use of `-7' will save
-     only a small amount of table space, and make your scanner
-     considerably less portable.  `Flex's' default behavior is to
-     generate an 8-bit scanner unless you use the `-Cf' or `-CF', in
-     which case `flex' defaults to generating 7-bit scanners unless
-     your site was always configured to generate 8-bit scanners (as
-     will often be the case with non-USA sites).  You can tell whether
-     flex generated a 7-bit or an 8-bit scanner by inspecting the flag
-     summary in the `-v' output as described above.
-
-     Note that if you use `-Cfe' or `-CFe' (those table compression
-     options, but also using equivalence classes as discussed see
-     below), flex still defaults to generating an 8-bit scanner, since
-     usually with these compression options full 8-bit tables are not
-     much more expensive than 7-bit tables.
-
-`-8'
-     instructs `flex' to generate an 8-bit scanner, i.e., one which can
-     recognize 8-bit characters.  This flag is only needed for scanners
-     generated using `-Cf' or `-CF', as otherwise flex defaults to
-     generating an 8-bit scanner anyway.
-
-     See the discussion of `-7' above for flex's default behavior and
-     the tradeoffs between 7-bit and 8-bit scanners.
-
-`-+'
-     specifies that you want flex to generate a C++ scanner class.  See
-     the section on Generating C++ Scanners below for details.
-
-`-C[aefFmr]'
-     controls the degree of table compression and, more generally,
-     trade-offs between small scanners and fast scanners.
-
-     `-Ca' ("align") instructs flex to trade off larger tables in the
-     generated scanner for faster performance because the elements of
-     the tables are better aligned for memory access and computation.
-     On some RISC architectures, fetching and manipulating long-words
-     is more efficient than with smaller-sized units such as
-     shortwords.  This option can double the size of the tables used by
-     your scanner.
-
-     `-Ce' directs `flex' to construct "equivalence classes", i.e.,
-     sets of characters which have identical lexical properties (for
-     example, if the only appearance of digits in the `flex' input is
-     in the character class "[0-9]" then the digits '0', '1', ..., '9'
-     will all be put in the same equivalence class).  Equivalence
-     classes usually give dramatic reductions in the final table/object
-     file sizes (typically a factor of 2-5) and are pretty cheap
-     performance-wise (one array look-up per character scanned).
-
-     `-Cf' specifies that the *full* scanner tables should be generated
-     - `flex' should not compress the tables by taking advantages of
-     similar transition functions for different states.
-
-     `-CF' specifies that the alternate fast scanner representation
-     (described above under the `-F' flag) should be used.  This option
-     cannot be used with `-+'.
-
-     `-Cm' directs `flex' to construct "meta-equivalence classes",
-     which are sets of equivalence classes (or characters, if
-     equivalence classes are not being used) that are commonly used
-     together.  Meta-equivalence classes are often a big win when using
-     compressed tables, but they have a moderate performance impact
-     (one or two "if" tests and one array look-up per character
-     scanned).
-
-     `-Cr' causes the generated scanner to *bypass* use of the standard
-     I/O library (stdio) for input.  Instead of calling `fread()' or
-     `getc()', the scanner will use the `read()' system call, resulting
-     in a performance gain which varies from system to system, but in
-     general is probably negligible unless you are also using `-Cf' or
-     `-CF'.  Using `-Cr' can cause strange behavior if, for example,
-     you read from `yyin' using stdio prior to calling the scanner
-     (because the scanner will miss whatever text your previous reads
-     left in the stdio input buffer).
-
-     `-Cr' has no effect if you define `YY_INPUT' (see The Generated
-     Scanner above).
-
-     A lone `-C' specifies that the scanner tables should be compressed
-     but neither equivalence classes nor meta-equivalence classes
-     should be used.
-
-     The options `-Cf' or `-CF' and `-Cm' do not make sense together -
-     there is no opportunity for meta-equivalence classes if the table
-     is not being compressed.  Otherwise the options may be freely
-     mixed, and are cumulative.
-
-     The default setting is `-Cem', which specifies that `flex' should
-     generate equivalence classes and meta-equivalence classes.  This
-     setting provides the highest degree of table compression.  You can
-     trade off faster-executing scanners at the cost of larger tables
-     with the following generally being true:
-
-          slowest & smallest
-                -Cem
-                -Cm
-                -Ce
-                -C
-                -C{f,F}e
-                -C{f,F}
-                -C{f,F}a
-          fastest & largest
-
-     Note that scanners with the smallest tables are usually generated
-     and compiled the quickest, so during development you will usually
-     want to use the default, maximal compression.
-
-     `-Cfe' is often a good compromise between speed and size for
-     production scanners.
-
-`-ooutput'
-     directs flex to write the scanner to the file `out-' `put' instead
-     of `lex.yy.c'.  If you combine `-o' with the `-t' option, then the
-     scanner is written to `stdout' but its `#line' directives (see the
-     `-L' option above) refer to the file `output'.
-
-`-Pprefix'
-     changes the default `yy' prefix used by `flex' for all
-     globally-visible variable and function names to instead be PREFIX.
-     For example, `-Pfoo' changes the name of `yytext' to `footext'.
-     It also changes the name of the default output file from
-     `lex.yy.c' to `lex.foo.c'.  Here are all of the names affected:
-
-          yy_create_buffer
-          yy_delete_buffer
-          yy_flex_debug
-          yy_init_buffer
-          yy_flush_buffer
-          yy_load_buffer_state
-          yy_switch_to_buffer
-          yyin
-          yyleng
-          yylex
-          yylineno
-          yyout
-          yyrestart
-          yytext
-          yywrap
-
-     (If you are using a C++ scanner, then only `yywrap' and
-     `yyFlexLexer' are affected.) Within your scanner itself, you can
-     still refer to the global variables and functions using either
-     version of their name; but externally, they have the modified name.
-
-     This option lets you easily link together multiple `flex' programs
-     into the same executable.  Note, though, that using this option
-     also renames `yywrap()', so you now *must* either provide your own
-     (appropriately-named) version of the routine for your scanner, or
-     use `%option noyywrap', as linking with `-lfl' no longer provides
-     one for you by default.
-
-`-Sskeleton_file'
-     overrides the default skeleton file from which `flex' constructs
-     its scanners.  You'll never need this option unless you are doing
-     `flex' maintenance or development.
-
-   `flex' also provides a mechanism for controlling options within the
-scanner specification itself, rather than from the flex command-line.
-This is done by including `%option' directives in the first section of
-the scanner specification.  You can specify multiple options with a
-single `%option' directive, and multiple directives in the first
-section of your flex input file.  Most options are given simply as
-names, optionally preceded by the word "no" (with no intervening
-whitespace) to negate their meaning.  A number are equivalent to flex
-flags or their negation:
-
-     7bit            -7 option
-     8bit            -8 option
-     align           -Ca option
-     backup          -b option
-     batch           -B option
-     c++             -+ option
-     
-     caseful or
-     case-sensitive  opposite of -i (default)
-     
-     case-insensitive or
-     caseless        -i option
-     
-     debug           -d option
-     default         opposite of -s option
-     ecs             -Ce option
-     fast            -F option
-     full            -f option
-     interactive     -I option
-     lex-compat      -l option
-     meta-ecs        -Cm option
-     perf-report     -p option
-     read            -Cr option
-     stdout          -t option
-     verbose         -v option
-     warn            opposite of -w option
-                     (use "%option nowarn" for -w)
-     
-     array           equivalent to "%array"
-     pointer         equivalent to "%pointer" (default)
-
-   Some `%option's' provide features otherwise not available:
-
-`always-interactive'
-     instructs flex to generate a scanner which always considers its
-     input "interactive".  Normally, on each new input file the scanner
-     calls `isatty()' in an attempt to determine whether the scanner's
-     input source is interactive and thus should be read a character at
-     a time.  When this option is used, however, then no such call is
-     made.
-
-`main'
-     directs flex to provide a default `main()' program for the
-     scanner, which simply calls `yylex()'.  This option implies
-     `noyywrap' (see below).
-
-`never-interactive'
-     instructs flex to generate a scanner which never considers its
-     input "interactive" (again, no call made to `isatty())'.  This is
-     the opposite of `always-' *interactive*.
-
-`stack'
-     enables the use of start condition stacks (see Start Conditions
-     above).
-
-`stdinit'
-     if unset (i.e., `%option nostdinit') initializes `yyin' and
-     `yyout' to nil `FILE' pointers, instead of `stdin' and `stdout'.
-
-`yylineno'
-     directs `flex' to generate a scanner that maintains the number of
-     the current line read from its input in the global variable
-     `yylineno'.  This option is implied by `%option lex-compat'.
-
-`yywrap'
-     if unset (i.e., `%option noyywrap'), makes the scanner not call
-     `yywrap()' upon an end-of-file, but simply assume that there are
-     no more files to scan (until the user points `yyin' at a new file
-     and calls `yylex()' again).
-
-   `flex' scans your rule actions to determine whether you use the
-`REJECT' or `yymore()' features.  The `reject' and `yymore' options are
-available to override its decision as to whether you use the options,
-either by setting them (e.g., `%option reject') to indicate the feature
-is indeed used, or unsetting them to indicate it actually is not used
-(e.g., `%option noyymore').
-
-   Three options take string-delimited values, offset with '=':
-
-     %option outfile="ABC"
-
-is equivalent to `-oABC', and
-
-     %option prefix="XYZ"
-
-is equivalent to `-PXYZ'.
-
-   Finally,
-
-     %option yyclass="foo"
-
-only applies when generating a C++ scanner (`-+' option).  It informs
-`flex' that you have derived `foo' as a subclass of `yyFlexLexer' so
-`flex' will place your actions in the member function `foo::yylex()'
-instead of `yyFlexLexer::yylex()'.  It also generates a
-`yyFlexLexer::yylex()' member function that emits a run-time error (by
-invoking `yyFlexLexer::LexerError()') if called.  See Generating C++
-Scanners, below, for additional information.
-
-   A number of options are available for lint purists who want to
-suppress the appearance of unneeded routines in the generated scanner.
-Each of the following, if unset, results in the corresponding routine
-not appearing in the generated scanner:
-
-     input, unput
-     yy_push_state, yy_pop_state, yy_top_state
-     yy_scan_buffer, yy_scan_bytes, yy_scan_string
-
-(though `yy_push_state()' and friends won't appear anyway unless you
-use `%option stack').
-
-
-File: flex.info,  Node: Performance,  Next: C++,  Prev: Options,  Up: Top
-
-Performance considerations
-==========================
-
-   The main design goal of `flex' is that it generate high-performance
-scanners.  It has been optimized for dealing well with large sets of
-rules.  Aside from the effects on scanner speed of the table
-compression `-C' options outlined above, there are a number of
-options/actions which degrade performance.  These are, from most
-expensive to least:
-
-     REJECT
-     %option yylineno
-     arbitrary trailing context
-     
-     pattern sets that require backing up
-     %array
-     %option interactive
-     %option always-interactive
-     
-     '^' beginning-of-line operator
-     yymore()
-
-   with the first three all being quite expensive and the last two
-being quite cheap.  Note also that `unput()' is implemented as a
-routine call that potentially does quite a bit of work, while
-`yyless()' is a quite-cheap macro; so if just putting back some excess
-text you scanned, use `yyless()'.
-
-   `REJECT' should be avoided at all costs when performance is
-important.  It is a particularly expensive option.
-
-   Getting rid of backing up is messy and often may be an enormous
-amount of work for a complicated scanner.  In principal, one begins by
-using the `-b' flag to generate a `lex.backup' file.  For example, on
-the input
-
-     %%
-     foo        return TOK_KEYWORD;
-     foobar     return TOK_KEYWORD;
-
-the file looks like:
-
-     State #6 is non-accepting -
-      associated rule line numbers:
-            2       3
-      out-transitions: [ o ]
-      jam-transitions: EOF [ \001-n  p-\177 ]
-     
-     State #8 is non-accepting -
-      associated rule line numbers:
-            3
-      out-transitions: [ a ]
-      jam-transitions: EOF [ \001-`  b-\177 ]
-     
-     State #9 is non-accepting -
-      associated rule line numbers:
-            3
-      out-transitions: [ r ]
-      jam-transitions: EOF [ \001-q  s-\177 ]
-     
-     Compressed tables always back up.
-
-   The first few lines tell us that there's a scanner state in which it
-can make a transition on an 'o' but not on any other character, and
-that in that state the currently scanned text does not match any rule.
-The state occurs when trying to match the rules found at lines 2 and 3
-in the input file.  If the scanner is in that state and then reads
-something other than an 'o', it will have to back up to find a rule
-which is matched.  With a bit of head-scratching one can see that this
-must be the state it's in when it has seen "fo".  When this has
-happened, if anything other than another 'o' is seen, the scanner will
-have to back up to simply match the 'f' (by the default rule).
-
-   The comment regarding State #8 indicates there's a problem when
-"foob" has been scanned.  Indeed, on any character other than an 'a',
-the scanner will have to back up to accept "foo".  Similarly, the
-comment for State #9 concerns when "fooba" has been scanned and an 'r'
-does not follow.
-
-   The final comment reminds us that there's no point going to all the
-trouble of removing backing up from the rules unless we're using `-Cf'
-or `-CF', since there's no performance gain doing so with compressed
-scanners.
-
-   The way to remove the backing up is to add "error" rules:
-
-     %%
-     foo         return TOK_KEYWORD;
-     foobar      return TOK_KEYWORD;
-     
-     fooba       |
-     foob        |
-     fo          {
-                 /* false alarm, not really a keyword */
-                 return TOK_ID;
-                 }
-
-   Eliminating backing up among a list of keywords can also be done
-using a "catch-all" rule:
-
-     %%
-     foo         return TOK_KEYWORD;
-     foobar      return TOK_KEYWORD;
-     
-     [a-z]+      return TOK_ID;
-
-   This is usually the best solution when appropriate.
-
-   Backing up messages tend to cascade.  With a complicated set of
-rules it's not uncommon to get hundreds of messages.  If one can
-decipher them, though, it often only takes a dozen or so rules to
-eliminate the backing up (though it's easy to make a mistake and have
-an error rule accidentally match a valid token.  A possible future
-`flex' feature will be to automatically add rules to eliminate backing
-up).
-
-   It's important to keep in mind that you gain the benefits of
-eliminating backing up only if you eliminate *every* instance of
-backing up.  Leaving just one means you gain nothing.
-
-   VARIABLE trailing context (where both the leading and trailing parts
-do not have a fixed length) entails almost the same performance loss as
-`REJECT' (i.e., substantial).  So when possible a rule like:
-
-     %%
-     mouse|rat/(cat|dog)   run();
-
-is better written:
-
-     %%
-     mouse/cat|dog         run();
-     rat/cat|dog           run();
-
-or as
-
-     %%
-     mouse|rat/cat         run();
-     mouse|rat/dog         run();
-
-   Note that here the special '|' action does *not* provide any
-savings, and can even make things worse (see Deficiencies / Bugs below).
-
-   Another area where the user can increase a scanner's performance
-(and one that's easier to implement) arises from the fact that the
-longer the tokens matched, the faster the scanner will run.  This is
-because with long tokens the processing of most input characters takes
-place in the (short) inner scanning loop, and does not often have to go
-through the additional work of setting up the scanning environment
-(e.g., `yytext') for the action.  Recall the scanner for C comments:
-
-     %x comment
-     %%
-             int line_num = 1;
-     
-     "/*"         BEGIN(comment);
-     
-     <comment>[^*\n]*
-     <comment>"*"+[^*/\n]*
-     <comment>\n             ++line_num;
-     <comment>"*"+"/"        BEGIN(INITIAL);
-
-   This could be sped up by writing it as:
-
-     %x comment
-     %%
-             int line_num = 1;
-     
-     "/*"         BEGIN(comment);
-     
-     <comment>[^*\n]*
-     <comment>[^*\n]*\n      ++line_num;
-     <comment>"*"+[^*/\n]*
-     <comment>"*"+[^*/\n]*\n ++line_num;
-     <comment>"*"+"/"        BEGIN(INITIAL);
-
-   Now instead of each newline requiring the processing of another
-action, recognizing the newlines is "distributed" over the other rules
-to keep the matched text as long as possible.  Note that *adding* rules
-does *not* slow down the scanner!  The speed of the scanner is
-independent of the number of rules or (modulo the considerations given
-at the beginning of this section) how complicated the rules are with
-regard to operators such as '*' and '|'.
-
-   A final example in speeding up a scanner: suppose you want to scan
-through a file containing identifiers and keywords, one per line and
-with no other extraneous characters, and recognize all the keywords.  A
-natural first approach is:
-
-     %%
-     asm      |
-     auto     |
-     break    |
-     ... etc ...
-     volatile |
-     while    /* it's a keyword */
-     
-     .|\n     /* it's not a keyword */
-
-   To eliminate the back-tracking, introduce a catch-all rule:
-
-     %%
-     asm      |
-     auto     |
-     break    |
-     ... etc ...
-     volatile |
-     while    /* it's a keyword */
-     
-     [a-z]+   |
-     .|\n     /* it's not a keyword */
-
-   Now, if it's guaranteed that there's exactly one word per line, then
-we can reduce the total number of matches by a half by merging in the
-recognition of newlines with that of the other tokens:
-
-     %%
-     asm\n    |
-     auto\n   |
-     break\n  |
-     ... etc ...
-     volatile\n |
-     while\n  /* it's a keyword */
-     
-     [a-z]+\n |
-     .|\n     /* it's not a keyword */
-
-   One has to be careful here, as we have now reintroduced backing up
-into the scanner.  In particular, while *we* know that there will never
-be any characters in the input stream other than letters or newlines,
-`flex' can't figure this out, and it will plan for possibly needing to
-back up when it has scanned a token like "auto" and then the next
-character is something other than a newline or a letter.  Previously it
-would then just match the "auto" rule and be done, but now it has no
-"auto" rule, only a "auto\n" rule.  To eliminate the possibility of
-backing up, we could either duplicate all rules but without final
-newlines, or, since we never expect to encounter such an input and
-therefore don't how it's classified, we can introduce one more
-catch-all rule, this one which doesn't include a newline:
-
-     %%
-     asm\n    |
-     auto\n   |
-     break\n  |
-     ... etc ...
-     volatile\n |
-     while\n  /* it's a keyword */
-     
-     [a-z]+\n |
-     [a-z]+   |
-     .|\n     /* it's not a keyword */
-
-   Compiled with `-Cf', this is about as fast as one can get a `flex'
-scanner to go for this particular problem.
-
-   A final note: `flex' is slow when matching NUL's, particularly when
-a token contains multiple NUL's.  It's best to write rules which match
-*short* amounts of text if it's anticipated that the text will often
-include NUL's.
-
-   Another final note regarding performance: as mentioned above in the
-section How the Input is Matched, dynamically resizing `yytext' to
-accommodate huge tokens is a slow process because it presently requires
-that the (huge) token be rescanned from the beginning.  Thus if
-performance is vital, you should attempt to match "large" quantities of
-text but not "huge" quantities, where the cutoff between the two is at
-about 8K characters/token.
-
-
-File: flex.info,  Node: C++,  Next: Incompatibilities,  Prev: Performance,  Up: Top
-
-Generating C++ scanners
-=======================
-
-   `flex' provides two different ways to generate scanners for use with
-C++.  The first way is to simply compile a scanner generated by `flex'
-using a C++ compiler instead of a C compiler.  You should not encounter
-any compilations errors (please report any you find to the email address
-given in the Author section below).  You can then use C++ code in your
-rule actions instead of C code.  Note that the default input source for
-your scanner remains `yyin', and default echoing is still done to
-`yyout'.  Both of these remain `FILE *' variables and not C++ `streams'.
-
-   You can also use `flex' to generate a C++ scanner class, using the
-`-+' option, (or, equivalently, `%option c++'), which is automatically
-specified if the name of the flex executable ends in a `+', such as
-`flex++'.  When using this option, flex defaults to generating the
-scanner to the file `lex.yy.cc' instead of `lex.yy.c'.  The generated
-scanner includes the header file `FlexLexer.h', which defines the
-interface to two C++ classes.
-
-   The first class, `FlexLexer', provides an abstract base class
-defining the general scanner class interface.  It provides the
-following member functions:
-
-`const char* YYText()'
-     returns the text of the most recently matched token, the
-     equivalent of `yytext'.
-
-`int YYLeng()'
-     returns the length of the most recently matched token, the
-     equivalent of `yyleng'.
-
-`int lineno() const'
-     returns the current input line number (see `%option yylineno'), or
-     1 if `%option yylineno' was not used.
-
-`void set_debug( int flag )'
-     sets the debugging flag for the scanner, equivalent to assigning to
-     `yy_flex_debug' (see the Options section above).  Note that you
-     must build the scanner using `%option debug' to include debugging
-     information in it.
-
-`int debug() const'
-     returns the current setting of the debugging flag.
-
-   Also provided are member functions equivalent to
-`yy_switch_to_buffer(), yy_create_buffer()' (though the first argument
-is an `istream*' object pointer and not a `FILE*', `yy_flush_buffer()',
-`yy_delete_buffer()', and `yyrestart()' (again, the first argument is a
-`istream*' object pointer).
-
-   The second class defined in `FlexLexer.h' is `yyFlexLexer', which is
-derived from `FlexLexer'.  It defines the following additional member
-functions:
-
-`yyFlexLexer( istream* arg_yyin = 0, ostream* arg_yyout = 0 )'
-     constructs a `yyFlexLexer' object using the given streams for
-     input and output.  If not specified, the streams default to `cin'
-     and `cout', respectively.
-
-`virtual int yylex()'
-     performs the same role is `yylex()' does for ordinary flex
-     scanners: it scans the input stream, consuming tokens, until a
-     rule's action returns a value.  If you derive a subclass S from
-     `yyFlexLexer' and want to access the member functions and
-     variables of S inside `yylex()', then you need to use `%option
-     yyclass="S"' to inform `flex' that you will be using that subclass
-     instead of `yyFlexLexer'.  In this case, rather than generating
-     `yyFlexLexer::yylex()', `flex' generates `S::yylex()' (and also
-     generates a dummy `yyFlexLexer::yylex()' that calls
-     `yyFlexLexer::LexerError()' if called).
-
-`virtual void switch_streams(istream* new_in = 0, ostream* new_out = 0)'
-     reassigns `yyin' to `new_in' (if non-nil) and `yyout' to `new_out'
-     (ditto), deleting the previous input buffer if `yyin' is
-     reassigned.
-
-`int yylex( istream* new_in = 0, ostream* new_out = 0 )'
-     first switches the input streams via `switch_streams( new_in,
-     new_out )' and then returns the value of `yylex()'.
-
-   In addition, `yyFlexLexer' defines the following protected virtual
-functions which you can redefine in derived classes to tailor the
-scanner:
-
-`virtual int LexerInput( char* buf, int max_size )'
-     reads up to `max_size' characters into BUF and returns the number
-     of characters read.  To indicate end-of-input, return 0
-     characters.  Note that "interactive" scanners (see the `-B' and
-     `-I' flags) define the macro `YY_INTERACTIVE'.  If you redefine
-     `LexerInput()' and need to take different actions depending on
-     whether or not the scanner might be scanning an interactive input
-     source, you can test for the presence of this name via `#ifdef'.
-
-`virtual void LexerOutput( const char* buf, int size )'
-     writes out SIZE characters from the buffer BUF, which, while
-     NUL-terminated, may also contain "internal" NUL's if the scanner's
-     rules can match text with NUL's in them.
-
-`virtual void LexerError( const char* msg )'
-     reports a fatal error message.  The default version of this
-     function writes the message to the stream `cerr' and exits.
-
-   Note that a `yyFlexLexer' object contains its *entire* scanning
-state.  Thus you can use such objects to create reentrant scanners.
-You can instantiate multiple instances of the same `yyFlexLexer' class,
-and you can also combine multiple C++ scanner classes together in the
-same program using the `-P' option discussed above.  Finally, note that
-the `%array' feature is not available to C++ scanner classes; you must
-use `%pointer' (the default).
-
-   Here is an example of a simple C++ scanner:
-
-         // An example of using the flex C++ scanner class.
-     
-     %{
-     int mylineno = 0;
-     %}
-     
-     string  \"[^\n"]+\"
-     
-     ws      [ \t]+
-     
-     alpha   [A-Za-z]
-     dig     [0-9]
-     name    ({alpha}|{dig}|\$)({alpha}|{dig}|[_.\-/$])*
-     num1    [-+]?{dig}+\.?([eE][-+]?{dig}+)?
-     num2    [-+]?{dig}*\.{dig}+([eE][-+]?{dig}+)?
-     number  {num1}|{num2}
-     
-     %%
-     
-     {ws}    /* skip blanks and tabs */
-     
-     "/*"    {
-             int c;
-     
-             while((c = yyinput()) != 0)
-                 {
-                 if(c == '\n')
-                     ++mylineno;
-     
-                 else if(c == '*')
-                     {
-                     if((c = yyinput()) == '/')
-                         break;
-                     else
-                         unput(c);
-                     }
-                 }
-             }
-     
-     {number}  cout << "number " << YYText() << '\n';
-     
-     \n        mylineno++;
-     
-     {name}    cout << "name " << YYText() << '\n';
-     
-     {string}  cout << "string " << YYText() << '\n';
-     
-     %%
-     
-     Version 2.5               December 1994                        44
-     
-     int main( int /* argc */, char** /* argv */ )
-         {
-         FlexLexer* lexer = new yyFlexLexer;
-         while(lexer->yylex() != 0)
-             ;
-         return 0;
-         }
-
-   If you want to create multiple (different) lexer classes, you use
-the `-P' flag (or the `prefix=' option) to rename each `yyFlexLexer' to
-some other `xxFlexLexer'.  You then can include `<FlexLexer.h>' in your
-other sources once per lexer class, first renaming `yyFlexLexer' as
-follows:
-
-     #undef yyFlexLexer
-     #define yyFlexLexer xxFlexLexer
-     #include <FlexLexer.h>
-     
-     #undef yyFlexLexer
-     #define yyFlexLexer zzFlexLexer
-     #include <FlexLexer.h>
-
-   if, for example, you used `%option prefix="xx"' for one of your
-scanners and `%option prefix="zz"' for the other.
-
-   IMPORTANT: the present form of the scanning class is *experimental*
-and may change considerably between major releases.
-
-
-File: flex.info,  Node: Incompatibilities,  Next: Diagnostics,  Prev: C++,  Up: Top
-
-Incompatibilities with `lex' and POSIX
-======================================
-
-   `flex' is a rewrite of the AT&T Unix `lex' tool (the two
-implementations do not share any code, though), with some extensions
-and incompatibilities, both of which are of concern to those who wish
-to write scanners acceptable to either implementation.  Flex is fully
-compliant with the POSIX `lex' specification, except that when using
-`%pointer' (the default), a call to `unput()' destroys the contents of
-`yytext', which is counter to the POSIX specification.
-
-   In this section we discuss all of the known areas of incompatibility
-between flex, AT&T lex, and the POSIX specification.
-
-   `flex's' `-l' option turns on maximum compatibility with the
-original AT&T `lex' implementation, at the cost of a major loss in the
-generated scanner's performance.  We note below which incompatibilities
-can be overcome using the `-l' option.
-
-   `flex' is fully compatible with `lex' with the following exceptions:
-
-   - The undocumented `lex' scanner internal variable `yylineno' is not
-     supported unless `-l' or `%option yylineno' is used.  `yylineno'
-     should be maintained on a per-buffer basis, rather than a
-     per-scanner (single global variable) basis.  `yylineno' is not
-     part of the POSIX specification.
-
-   - The `input()' routine is not redefinable, though it may be called
-     to read characters following whatever has been matched by a rule.
-     If `input()' encounters an end-of-file the normal `yywrap()'
-     processing is done.  A "real" end-of-file is returned by `input()'
-     as `EOF'.
-
-     Input is instead controlled by defining the `YY_INPUT' macro.
-
-     The `flex' restriction that `input()' cannot be redefined is in
-     accordance with the POSIX specification, which simply does not
-     specify any way of controlling the scanner's input other than by
-     making an initial assignment to `yyin'.
-
-   - The `unput()' routine is not redefinable.  This restriction is in
-     accordance with POSIX.
-
-   - `flex' scanners are not as reentrant as `lex' scanners.  In
-     particular, if you have an interactive scanner and an interrupt
-     handler which long-jumps out of the scanner, and the scanner is
-     subsequently called again, you may get the following message:
-
-          fatal flex scanner internal error--end of buffer missed
-
-     To reenter the scanner, first use
-
-          yyrestart( yyin );
-
-     Note that this call will throw away any buffered input; usually
-     this isn't a problem with an interactive scanner.
-
-     Also note that flex C++ scanner classes *are* reentrant, so if
-     using C++ is an option for you, you should use them instead.  See
-     "Generating C++ Scanners" above for details.
-
-   - `output()' is not supported.  Output from the `ECHO' macro is done
-     to the file-pointer `yyout' (default `stdout').
-
-     `output()' is not part of the POSIX specification.
-
-   - `lex' does not support exclusive start conditions (%x), though
-     they are in the POSIX specification.
-
-   - When definitions are expanded, `flex' encloses them in
-     parentheses.  With lex, the following:
-
-          NAME    [A-Z][A-Z0-9]*
-          %%
-          foo{NAME}?      printf( "Found it\n" );
-          %%
-
-     will not match the string "foo" because when the macro is expanded
-     the rule is equivalent to "foo[A-Z][A-Z0-9]*?" and the precedence
-     is such that the '?' is associated with "[A-Z0-9]*".  With `flex',
-     the rule will be expanded to "foo([A-Z][A-Z0-9]*)?" and so the
-     string "foo" will match.
-
-     Note that if the definition begins with `^' or ends with `$' then
-     it is *not* expanded with parentheses, to allow these operators to
-     appear in definitions without losing their special meanings.  But
-     the `<s>, /', and `<<EOF>>' operators cannot be used in a `flex'
-     definition.
-
-     Using `-l' results in the `lex' behavior of no parentheses around
-     the definition.
-
-     The POSIX specification is that the definition be enclosed in
-     parentheses.
-
-   - Some implementations of `lex' allow a rule's action to begin on a
-     separate line, if the rule's pattern has trailing whitespace:
-
-          %%
-          foo|bar<space here>
-            { foobar_action(); }
-
-     `flex' does not support this feature.
-
-   - The `lex' `%r' (generate a Ratfor scanner) option is not
-     supported.  It is not part of the POSIX specification.
-
-   - After a call to `unput()', `yytext' is undefined until the next
-     token is matched, unless the scanner was built using `%array'.
-     This is not the case with `lex' or the POSIX specification.  The
-     `-l' option does away with this incompatibility.
-
-   - The precedence of the `{}' (numeric range) operator is different.
-     `lex' interprets "abc{1,3}" as "match one, two, or three
-     occurrences of 'abc'", whereas `flex' interprets it as "match 'ab'
-     followed by one, two, or three occurrences of 'c'".  The latter is
-     in agreement with the POSIX specification.
-
-   - The precedence of the `^' operator is different.  `lex' interprets
-     "^foo|bar" as "match either 'foo' at the beginning of a line, or
-     'bar' anywhere", whereas `flex' interprets it as "match either
-     'foo' or 'bar' if they come at the beginning of a line".  The
-     latter is in agreement with the POSIX specification.
-
-   - The special table-size declarations such as `%a' supported by
-     `lex' are not required by `flex' scanners; `flex' ignores them.
-
-   - The name FLEX_SCANNER is #define'd so scanners may be written for
-     use with either `flex' or `lex'.  Scanners also include
-     `YY_FLEX_MAJOR_VERSION' and `YY_FLEX_MINOR_VERSION' indicating
-     which version of `flex' generated the scanner (for example, for the
-     2.5 release, these defines would be 2 and 5 respectively).
-
-   The following `flex' features are not included in `lex' or the POSIX
-specification:
-
-     C++ scanners
-     %option
-     start condition scopes
-     start condition stacks
-     interactive/non-interactive scanners
-     yy_scan_string() and friends
-     yyterminate()
-     yy_set_interactive()
-     yy_set_bol()
-     YY_AT_BOL()
-     <<EOF>>
-     <*>
-     YY_DECL
-     YY_START
-     YY_USER_ACTION
-     YY_USER_INIT
-     #line directives
-     %{}'s around actions
-     multiple actions on a line
-
-plus almost all of the flex flags.  The last feature in the list refers
-to the fact that with `flex' you can put multiple actions on the same
-line, separated with semicolons, while with `lex', the following
-
-     foo    handle_foo(); ++num_foos_seen;
-
-is (rather surprisingly) truncated to
-
-     foo    handle_foo();
-
-   `flex' does not truncate the action.  Actions that are not enclosed
-in braces are simply terminated at the end of the line.
-
-
-File: flex.info,  Node: Diagnostics,  Next: Files,  Prev: Incompatibilities,  Up: Top
-
-Diagnostics
-===========
-
-`warning, rule cannot be matched'
-     indicates that the given rule cannot be matched because it follows
-     other rules that will always match the same text as it.  For
-     example, in the following "foo" cannot be matched because it comes
-     after an identifier "catch-all" rule:
-
-          [a-z]+    got_identifier();
-          foo       got_foo();
-
-     Using `REJECT' in a scanner suppresses this warning.
-
-`warning, -s option given but default rule can be matched'
-     means that it is possible (perhaps only in a particular start
-     condition) that the default rule (match any single character) is
-     the only one that will match a particular input.  Since `-s' was
-     given, presumably this is not intended.
-
-`reject_used_but_not_detected undefined'
-`yymore_used_but_not_detected undefined'
-     These errors can occur at compile time.  They indicate that the
-     scanner uses `REJECT' or `yymore()' but that `flex' failed to
-     notice the fact, meaning that `flex' scanned the first two sections
-     looking for occurrences of these actions and failed to find any,
-     but somehow you snuck some in (via a #include file, for example).
-     Use `%option reject' or `%option yymore' to indicate to flex that
-     you really do use these features.
-
-`flex scanner jammed'
-     a scanner compiled with `-s' has encountered an input string which
-     wasn't matched by any of its rules.  This error can also occur due
-     to internal problems.
-
-`token too large, exceeds YYLMAX'
-     your scanner uses `%array' and one of its rules matched a string
-     longer than the `YYL-' `MAX' constant (8K bytes by default).  You
-     can increase the value by #define'ing `YYLMAX' in the definitions
-     section of your `flex' input.
-
-`scanner requires -8 flag to use the character 'X''
-     Your scanner specification includes recognizing the 8-bit
-     character X and you did not specify the -8 flag, and your scanner
-     defaulted to 7-bit because you used the `-Cf' or `-CF' table
-     compression options.  See the discussion of the `-7' flag for
-     details.
-
-`flex scanner push-back overflow'
-     you used `unput()' to push back so much text that the scanner's
-     buffer could not hold both the pushed-back text and the current
-     token in `yytext'.  Ideally the scanner should dynamically resize
-     the buffer in this case, but at present it does not.
-
-`input buffer overflow, can't enlarge buffer because scanner uses REJECT'
-     the scanner was working on matching an extremely large token and
-     needed to expand the input buffer.  This doesn't work with
-     scanners that use `REJECT'.
-
-`fatal flex scanner internal error--end of buffer missed'
-     This can occur in an scanner which is reentered after a long-jump
-     has jumped out (or over) the scanner's activation frame.  Before
-     reentering the scanner, use:
-
-          yyrestart( yyin );
-
-     or, as noted above, switch to using the C++ scanner class.
-
-`too many start conditions in <> construct!'
-     you listed more start conditions in a <> construct than exist (so
-     you must have listed at least one of them twice).
-
-
-File: flex.info,  Node: Files,  Next: Deficiencies,  Prev: Diagnostics,  Up: Top
-
-Files
-=====
-
-`-lfl'
-     library with which scanners must be linked.
-
-`lex.yy.c'
-     generated scanner (called `lexyy.c' on some systems).
-
-`lex.yy.cc'
-     generated C++ scanner class, when using `-+'.
-
-`<FlexLexer.h>'
-     header file defining the C++ scanner base class, `FlexLexer', and
-     its derived class, `yyFlexLexer'.
-
-`flex.skl'
-     skeleton scanner.  This file is only used when building flex, not
-     when flex executes.
-
-`lex.backup'
-     backing-up information for `-b' flag (called `lex.bck' on some
-     systems).
-
-
-File: flex.info,  Node: Deficiencies,  Next: See also,  Prev: Files,  Up: Top
-
-Deficiencies / Bugs
-===================
-
-   Some trailing context patterns cannot be properly matched and
-generate warning messages ("dangerous trailing context").  These are
-patterns where the ending of the first part of the rule matches the
-beginning of the second part, such as "zx*/xy*", where the 'x*' matches
-the 'x' at the beginning of the trailing context.  (Note that the POSIX
-draft states that the text matched by such patterns is undefined.)
-
-   For some trailing context rules, parts which are actually
-fixed-length are not recognized as such, leading to the abovementioned
-performance loss.  In particular, parts using '|' or {n} (such as
-"foo{3}") are always considered variable-length.
-
-   Combining trailing context with the special '|' action can result in
-*fixed* trailing context being turned into the more expensive VARIABLE
-trailing context.  For example, in the following:
-
-     %%
-     abc      |
-     xyz/def
-
-   Use of `unput()' invalidates yytext and yyleng, unless the `%array'
-directive or the `-l' option has been used.
-
-   Pattern-matching of NUL's is substantially slower than matching
-other characters.
-
-   Dynamic resizing of the input buffer is slow, as it entails
-rescanning all the text matched so far by the current (generally huge)
-token.
-
-   Due to both buffering of input and read-ahead, you cannot intermix
-calls to <stdio.h> routines, such as, for example, `getchar()', with
-`flex' rules and expect it to work.  Call `input()' instead.
-
-   The total table entries listed by the `-v' flag excludes the number
-of table entries needed to determine what rule has been matched.  The
-number of entries is equal to the number of DFA states if the scanner
-does not use `REJECT', and somewhat greater than the number of states
-if it does.
-
-   `REJECT' cannot be used with the `-f' or `-F' options.
-
-   The `flex' internal algorithms need documentation.
-
-
-File: flex.info,  Node: See also,  Next: Author,  Prev: Deficiencies,  Up: Top
-
-See also
-========
-
-   `lex'(1), `yacc'(1), `sed'(1), `awk'(1).
-
-   John Levine, Tony Mason, and Doug Brown: Lex & Yacc; O'Reilly and
-Associates.  Be sure to get the 2nd edition.
-
-   M. E. Lesk and E. Schmidt, LEX - Lexical Analyzer Generator.
-
-   Alfred Aho, Ravi Sethi and Jeffrey Ullman: Compilers: Principles,
-Techniques and Tools; Addison-Wesley (1986).  Describes the
-pattern-matching techniques used by `flex' (deterministic finite
-automata).
-
-
-File: flex.info,  Node: Author,  Prev: See also,  Up: Top
-
-Author
-======
-
-   Vern Paxson, with the help of many ideas and much inspiration from
-Van Jacobson.  Original version by Jef Poskanzer.  The fast table
-representation is a partial implementation of a design done by Van
-Jacobson.  The implementation was done by Kevin Gong and Vern Paxson.
-
-   Thanks to the many `flex' beta-testers, feedbackers, and
-contributors, especially Francois Pinard, Casey Leedom, Stan Adermann,
-Terry Allen, David Barker-Plummer, John Basrai, Nelson H.F. Beebe,
-`benson@odi.com', Karl Berry, Peter A. Bigot, Simon Blanchard, Keith
-Bostic, Frederic Brehm, Ian Brockbank, Kin Cho, Nick Christopher, Brian
-Clapper, J.T. Conklin, Jason Coughlin, Bill Cox, Nick Cropper, Dave
-Curtis, Scott David Daniels, Chris G. Demetriou, Theo Deraadt, Mike
-Donahue, Chuck Doucette, Tom Epperly, Leo Eskin, Chris Faylor, Chris
-Flatters, Jon Forrest, Joe Gayda, Kaveh R. Ghazi, Eric Goldman,
-Christopher M.  Gould, Ulrich Grepel, Peer Griebel, Jan Hajic, Charles
-Hemphill, NORO Hideo, Jarkko Hietaniemi, Scott Hofmann, Jeff Honig,
-Dana Hudes, Eric Hughes, John Interrante, Ceriel Jacobs, Michal
-Jaegermann, Sakari Jalovaara, Jeffrey R. Jones, Henry Juengst, Klaus
-Kaempf, Jonathan I. Kamens, Terrence O Kane, Amir Katz,
-`ken@ken.hilco.com', Kevin B. Kenny, Steve Kirsch, Winfried Koenig,
-Marq Kole, Ronald Lamprecht, Greg Lee, Rohan Lenard, Craig Leres, John
-Levine, Steve Liddle, Mike Long, Mohamed el Lozy, Brian Madsen, Malte,
-Joe Marshall, Bengt Martensson, Chris Metcalf, Luke Mewburn, Jim
-Meyering, R.  Alexander Milowski, Erik Naggum, G.T. Nicol, Landon Noll,
-James Nordby, Marc Nozell, Richard Ohnemus, Karsten Pahnke, Sven Panne,
-Roland Pesch, Walter Pelissero, Gaumond Pierre, Esmond Pitt, Jef
-Poskanzer, Joe Rahmeh, Jarmo Raiha, Frederic Raimbault, Pat Rankin,
-Rick Richardson, Kevin Rodgers, Kai Uwe Rommel, Jim Roskind, Alberto
-Santini, Andreas Scherer, Darrell Schiebel, Raf Schietekat, Doug
-Schmidt, Philippe Schnoebelen, Andreas Schwab, Alex Siegel, Eckehard
-Stolz, Jan-Erik Strvmquist, Mike Stump, Paul Stuart, Dave Tallman, Ian
-Lance Taylor, Chris Thewalt, Richard M. Timoney, Jodi Tsai, Paul
-Tuinenga, Gary Weik, Frank Whaley, Gerhard Wilhelms, Kent Williams, Ken
-Yap, Ron Zellar, Nathan Zelle, David Zuhn, and those whose names have
-slipped my marginal mail-archiving skills but whose contributions are
-appreciated all the same.
-
-   Thanks to Keith Bostic, Jon Forrest, Noah Friedman, John Gilmore,
-Craig Leres, John Levine, Bob Mulcahy, G.T.  Nicol, Francois Pinard,
-Rich Salz, and Richard Stallman for help with various distribution
-headaches.
-
-   Thanks to Esmond Pitt and Earle Horton for 8-bit character support;
-to Benson Margulies and Fred Burke for C++ support; to Kent Williams
-and Tom Epperly for C++ class support; to Ove Ewerlid for support of
-NUL's; and to Eric Hughes for support of multiple buffers.
-
-   This work was primarily done when I was with the Real Time Systems
-Group at the Lawrence Berkeley Laboratory in Berkeley, CA.  Many thanks
-to all there for the support I received.
-
-   Send comments to `vern@ee.lbl.gov'.
-
-
-
-Tag Table:
-Node: Top1430
-Node: Name2808
-Node: Synopsis2933
-Node: Overview3145
-Node: Description4986
-Node: Examples5748
-Node: Format8896
-Node: Patterns11637
-Node: Matching18138
-Node: Actions21438
-Node: Generated scanner30560
-Node: Start conditions34988
-Node: Multiple buffers45069
-Node: End-of-file rules50975
-Node: Miscellaneous52508
-Node: User variables55279
-Node: YACC interface57651
-Node: Options58542
-Node: Performance78234
-Node: C++87532
-Node: Incompatibilities94993
-Node: Diagnostics101853
-Node: Files105094
-Node: Deficiencies105715
-Node: See also107684
-Node: Author108216
-
-End Tag Table
diff --git a/WebKitTools/android/flex-2.5.4a/MISC/texinfo/flex.texi b/WebKitTools/android/flex-2.5.4a/MISC/texinfo/flex.texi
deleted file mode 100644
index 23280b1..0000000
--- a/WebKitTools/android/flex-2.5.4a/MISC/texinfo/flex.texi
+++ /dev/null
@@ -1,3448 +0,0 @@
-\input texinfo
-@c %**start of header
-@setfilename flex.info
-@settitle Flex - a scanner generator
-@c @finalout
-@c @setchapternewpage odd
-@c %**end of header
-
-@set EDITION 2.5
-@set UPDATED March 1995
-@set VERSION 2.5
-
-@c FIXME - Reread a printed copy with a red pen and patience.
-@c FIXME - Modify all "See ..." references and replace with @xref's.
-
-@ifinfo
-@format
-START-INFO-DIR-ENTRY
-* Flex: (flex).         A fast scanner generator.
-END-INFO-DIR-ENTRY
-@end format
-@end ifinfo
-
-@c Define new indices for commands, filenames, and options.
-@c @defcodeindex cm
-@c @defcodeindex fl
-@c @defcodeindex op
-
-@c Put everything in one index (arbitrarily chosen to be the concept index).
-@c @syncodeindex cm cp
-@c @syncodeindex fl cp
-@syncodeindex fn cp
-@syncodeindex ky cp
-@c @syncodeindex op cp
-@syncodeindex pg cp
-@syncodeindex vr cp
-
-@ifinfo
-This file documents Flex.
-
-Copyright (c) 1990 The Regents of the University of California.
-All rights reserved.
-
-This code is derived from software contributed to Berkeley by
-Vern Paxson.
-
-The United States Government has rights in this work pursuant
-to contract no. DE-AC03-76SF00098 between the United States
-Department of Energy and the University of California.
-
-Redistribution and use in source and binary forms with or without
-modification are permitted provided that: (1) source distributions
-retain this entire copyright notice and comment, and (2)
-distributions including binaries display the following
-acknowledgement:  ``This product includes software developed by the
-University of California, Berkeley and its contributors'' in the
-documentation or other materials provided with the distribution and
-in all advertising materials mentioning features or use of this
-software.  Neither the name of the University nor the names of its
-contributors may be used to endorse or promote products derived
-from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.
-
-@ignore
-Permission is granted to process this file through TeX and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-@end ifinfo
-
-@titlepage
-@title Flex, version @value{VERSION}
-@subtitle A fast scanner generator
-@subtitle Edition @value{EDITION}, @value{UPDATED}
-@author Vern Paxson
-
-@page
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1990 The Regents of the University of California.
-All rights reserved.
-
-This code is derived from software contributed to Berkeley by
-Vern Paxson.
-
-The United States Government has rights in this work pursuant
-to contract no. DE-AC03-76SF00098 between the United States
-Department of Energy and the University of California.
-
-Redistribution and use in source and binary forms with or without
-modification are permitted provided that: (1) source distributions
-retain this entire copyright notice and comment, and (2)
-distributions including binaries display the following
-acknowledgement:  ``This product includes software developed by the
-University of California, Berkeley and its contributors'' in the
-documentation or other materials provided with the distribution and
-in all advertising materials mentioning features or use of this
-software.  Neither the name of the University nor the names of its
-contributors may be used to endorse or promote products derived
-from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.
-@end titlepage
-
-@ifinfo
-
-@node Top, Name, (dir), (dir)
-@top flex
-
-@cindex scanner generator
-
-This manual documents @code{flex}.  It covers release @value{VERSION}.
-
-@menu
-* Name::                        Name
-* Synopsis::                    Synopsis
-* Overview::                    Overview
-* Description::                 Description
-* Examples::                    Some simple examples
-* Format::                      Format of the input file
-* Patterns::                    Patterns
-* Matching::                    How the input is matched
-* Actions::                     Actions
-* Generated scanner::           The generated scanner
-* Start conditions::            Start conditions
-* Multiple buffers::            Multiple input buffers
-* End-of-file rules::           End-of-file rules
-* Miscellaneous::               Miscellaneous macros
-* User variables::              Values available to the user
-* YACC interface::              Interfacing with @code{yacc}
-* Options::                     Options
-* Performance::                 Performance considerations
-* C++::                         Generating C++ scanners
-* Incompatibilities::           Incompatibilities with @code{lex} and POSIX
-* Diagnostics::                 Diagnostics
-* Files::                       Files
-* Deficiencies::                Deficiencies / Bugs
-* See also::                    See also
-* Author::                      Author
-@c * Index::                       Index
-@end menu
-
-@end ifinfo
-
-@node Name, Synopsis, Top, Top
-@section Name
-
-flex - fast lexical analyzer generator
-
-@node Synopsis, Overview, Name, Top
-@section Synopsis
-
-@example
-flex [-bcdfhilnpstvwBFILTV78+? -C[aefFmr] -ooutput -Pprefix -Sskeleton]
-[--help --version] [@var{filename} @dots{}]
-@end example
-
-@node Overview, Description, Synopsis, Top
-@section Overview
-
-This manual describes @code{flex}, a tool for generating programs
-that perform pattern-matching on text.  The manual
-includes both tutorial and reference sections:
-
-@table @asis
-@item Description
-a brief overview of the tool
-
-@item Some Simple Examples
-
-@item Format Of The Input File
-
-@item Patterns
-the extended regular expressions used by flex
-
-@item How The Input Is Matched
-the rules for determining what has been matched
-
-@item Actions
-how to specify what to do when a pattern is matched
-
-@item The Generated Scanner
-details regarding the scanner that flex produces;
-how to control the input source
-
-@item Start Conditions
-introducing context into your scanners, and
-managing "mini-scanners"
-
-@item Multiple Input Buffers
-how to manipulate multiple input sources; how to
-scan from strings instead of files
-
-@item End-of-file Rules
-special rules for matching the end of the input
-
-@item Miscellaneous Macros
-a summary of macros available to the actions
-
-@item Values Available To The User
-a summary of values available to the actions
-
-@item Interfacing With Yacc
-connecting flex scanners together with yacc parsers
-
-@item Options
-flex command-line options, and the "%option"
-directive
-
-@item Performance Considerations
-how to make your scanner go as fast as possible
-
-@item Generating C++ Scanners
-the (experimental) facility for generating C++
-scanner classes
-
-@item Incompatibilities With Lex And POSIX
-how flex differs from AT&T lex and the POSIX lex
-standard
-
-@item Diagnostics
-those error messages produced by flex (or scanners
-it generates) whose meanings might not be apparent
-
-@item Files
-files used by flex
-
-@item Deficiencies / Bugs
-known problems with flex
-
-@item See Also
-other documentation, related tools
-
-@item Author
-includes contact information
-@end table
-
-@node Description, Examples, Overview, Top
-@section Description
-
-@code{flex} is a tool for generating @dfn{scanners}: programs which
-recognized lexical patterns in text.  @code{flex} reads the given
-input files, or its standard input if no file names are
-given, for a description of a scanner to generate.  The
-description is in the form of pairs of regular expressions
-and C code, called @dfn{rules}. @code{flex} generates as output a C
-source file, @file{lex.yy.c}, which defines a routine @samp{yylex()}.
-This file is compiled and linked with the @samp{-lfl} library to
-produce an executable.  When the executable is run, it
-analyzes its input for occurrences of the regular
-expressions.  Whenever it finds one, it executes the
-corresponding C code.
-
-@node Examples, Format, Description, Top
-@section Some simple examples
-
-First some simple examples to get the flavor of how one
-uses @code{flex}.  The following @code{flex} input specifies a scanner
-which whenever it encounters the string "username" will
-replace it with the user's login name:
-
-@example
-%%
-username    printf( "%s", getlogin() );
-@end example
-
-By default, any text not matched by a @code{flex} scanner is
-copied to the output, so the net effect of this scanner is
-to copy its input file to its output with each occurrence
-of "username" expanded.  In this input, there is just one
-rule.  "username" is the @var{pattern} and the "printf" is the
-@var{action}.  The "%%" marks the beginning of the rules.
-
-Here's another simple example:
-
-@example
-        int num_lines = 0, num_chars = 0;
-
-%%
-\n      ++num_lines; ++num_chars;
-.       ++num_chars;
-
-%%
-main()
-        @{
-        yylex();
-        printf( "# of lines = %d, # of chars = %d\n",
-                num_lines, num_chars );
-        @}
-@end example
-
-This scanner counts the number of characters and the
-number of lines in its input (it produces no output other
-than the final report on the counts).  The first line
-declares two globals, "num_lines" and "num_chars", which
-are accessible both inside @samp{yylex()} and in the @samp{main()}
-routine declared after the second "%%".  There are two rules,
-one which matches a newline ("\n") and increments both the
-line count and the character count, and one which matches
-any character other than a newline (indicated by the "."
-regular expression).
-
-A somewhat more complicated example:
-
-@example
-/* scanner for a toy Pascal-like language */
-
-%@{
-/* need this for the call to atof() below */
-#include <math.h>
-%@}
-
-DIGIT    [0-9]
-ID       [a-z][a-z0-9]*
-
-%%
-
-@{DIGIT@}+    @{
-            printf( "An integer: %s (%d)\n", yytext,
-                    atoi( yytext ) );
-            @}
-
-@{DIGIT@}+"."@{DIGIT@}*        @{
-            printf( "A float: %s (%g)\n", yytext,
-                    atof( yytext ) );
-            @}
-
-if|then|begin|end|procedure|function        @{
-            printf( "A keyword: %s\n", yytext );
-            @}
-
-@{ID@}        printf( "An identifier: %s\n", yytext );
-
-"+"|"-"|"*"|"/"   printf( "An operator: %s\n", yytext );
-
-"@{"[^@}\n]*"@}"     /* eat up one-line comments */
-
-[ \t\n]+          /* eat up whitespace */
-
-.           printf( "Unrecognized character: %s\n", yytext );
-
-%%
-
-main( argc, argv )
-int argc;
-char **argv;
-    @{
-    ++argv, --argc;  /* skip over program name */
-    if ( argc > 0 )
-            yyin = fopen( argv[0], "r" );
-    else
-            yyin = stdin;
-
-    yylex();
-    @}
-@end example
-
-This is the beginnings of a simple scanner for a language
-like Pascal.  It identifies different types of @var{tokens} and
-reports on what it has seen.
-
-The details of this example will be explained in the
-following sections.
-
-@node Format, Patterns, Examples, Top
-@section Format of the input file
-
-The @code{flex} input file consists of three sections, separated
-by a line with just @samp{%%} in it:
-
-@example
-definitions
-%%
-rules
-%%
-user code
-@end example
-
-The @dfn{definitions} section contains declarations of simple
-@dfn{name} definitions to simplify the scanner specification,
-and declarations of @dfn{start conditions}, which are explained
-in a later section.
-Name definitions have the form:
-
-@example
-name definition
-@end example
-
-The "name" is a word beginning with a letter or an
-underscore ('_') followed by zero or more letters, digits, '_',
-or '-' (dash).  The definition is taken to begin at the
-first non-white-space character following the name and
-continuing to the end of the line.  The definition can
-subsequently be referred to using "@{name@}", which will
-expand to "(definition)".  For example,
-
-@example
-DIGIT    [0-9]
-ID       [a-z][a-z0-9]*
-@end example
-
-@noindent
-defines "DIGIT" to be a regular expression which matches a
-single digit, and "ID" to be a regular expression which
-matches a letter followed by zero-or-more
-letters-or-digits.  A subsequent reference to
-
-@example
-@{DIGIT@}+"."@{DIGIT@}*
-@end example
-
-@noindent
-is identical to
-
-@example
-([0-9])+"."([0-9])*
-@end example
-
-@noindent
-and matches one-or-more digits followed by a '.' followed
-by zero-or-more digits.
-
-The @var{rules} section of the @code{flex} input contains a series of
-rules of the form:
-
-@example
-pattern   action
-@end example
-
-@noindent
-where the pattern must be unindented and the action must
-begin on the same line.
-
-See below for a further description of patterns and
-actions.
-
-Finally, the user code section is simply copied to
-@file{lex.yy.c} verbatim.  It is used for companion routines
-which call or are called by the scanner.  The presence of
-this section is optional; if it is missing, the second @samp{%%}
-in the input file may be skipped, too.
-
-In the definitions and rules sections, any @emph{indented} text or
-text enclosed in @samp{%@{} and @samp{%@}} is copied verbatim to the
-output (with the @samp{%@{@}}'s removed).  The @samp{%@{@}}'s must
-appear unindented on lines by themselves.
-
-In the rules section, any indented or %@{@} text appearing
-before the first rule may be used to declare variables
-which are local to the scanning routine and (after the
-declarations) code which is to be executed whenever the
-scanning routine is entered.  Other indented or %@{@} text
-in the rule section is still copied to the output, but its
-meaning is not well-defined and it may well cause
-compile-time errors (this feature is present for @code{POSIX} compliance;
-see below for other such features).
-
-In the definitions section (but not in the rules section),
-an unindented comment (i.e., a line beginning with "/*")
-is also copied verbatim to the output up to the next "*/".
-
-@node Patterns, Matching, Format, Top
-@section Patterns
-
-The patterns in the input are written using an extended
-set of regular expressions.  These are:
-
-@table @samp
-@item x
-match the character @samp{x}
-@item .
-any character (byte) except newline
-@item [xyz]
-a "character class"; in this case, the pattern
-matches either an @samp{x}, a @samp{y}, or a @samp{z}
-@item [abj-oZ]
-a "character class" with a range in it; matches
-an @samp{a}, a @samp{b}, any letter from @samp{j} through @samp{o},
-or a @samp{Z}
-@item [^A-Z]
-a "negated character class", i.e., any character
-but those in the class.  In this case, any
-character EXCEPT an uppercase letter.
-@item [^A-Z\n]
-any character EXCEPT an uppercase letter or
-a newline
-@item @var{r}*
-zero or more @var{r}'s, where @var{r} is any regular expression
-@item @var{r}+
-one or more @var{r}'s
-@item @var{r}?
-zero or one @var{r}'s (that is, "an optional @var{r}")
-@item @var{r}@{2,5@}
-anywhere from two to five @var{r}'s
-@item @var{r}@{2,@}
-two or more @var{r}'s
-@item @var{r}@{4@}
-exactly 4 @var{r}'s
-@item @{@var{name}@}
-the expansion of the "@var{name}" definition
-(see above)
-@item "[xyz]\"foo"
-the literal string: @samp{[xyz]"foo}
-@item \@var{x}
-if @var{x} is an @samp{a}, @samp{b}, @samp{f}, @samp{n}, @samp{r}, @samp{t}, or @samp{v},
-then the ANSI-C interpretation of \@var{x}.
-Otherwise, a literal @samp{@var{x}} (used to escape
-operators such as @samp{*})
-@item \0
-a NUL character (ASCII code 0)
-@item \123
-the character with octal value 123
-@item \x2a
-the character with hexadecimal value @code{2a}
-@item (@var{r})
-match an @var{r}; parentheses are used to override
-precedence (see below)
-@item @var{r}@var{s}
-the regular expression @var{r} followed by the
-regular expression @var{s}; called "concatenation"
-@item @var{r}|@var{s}
-either an @var{r} or an @var{s}
-@item @var{r}/@var{s}
-an @var{r} but only if it is followed by an @var{s}.  The text
-matched by @var{s} is included when determining whether this rule is
-the @dfn{longest match}, but is then returned to the input before
-the action is executed.  So the action only sees the text matched
-by @var{r}.  This type of pattern is called @dfn{trailing context}.
-(There are some combinations of @samp{@var{r}/@var{s}} that @code{flex}
-cannot match correctly; see notes in the Deficiencies / Bugs section
-below regarding "dangerous trailing context".)
-@item ^@var{r}
-an @var{r}, but only at the beginning of a line (i.e.,
-which just starting to scan, or right after a
-newline has been scanned).
-@item @var{r}$
-an @var{r}, but only at the end of a line (i.e., just
-before a newline).  Equivalent to "@var{r}/\n".
-
-Note that flex's notion of "newline" is exactly
-whatever the C compiler used to compile flex
-interprets '\n' as; in particular, on some DOS
-systems you must either filter out \r's in the
-input yourself, or explicitly use @var{r}/\r\n for "r$".
-@item <@var{s}>@var{r}
-an @var{r}, but only in start condition @var{s} (see
-below for discussion of start conditions)
-<@var{s1},@var{s2},@var{s3}>@var{r}
-same, but in any of start conditions @var{s1},
-@var{s2}, or @var{s3}
-@item <*>@var{r}
-an @var{r} in any start condition, even an exclusive one.
-@item <<EOF>>
-an end-of-file
-<@var{s1},@var{s2}><<EOF>>
-an end-of-file when in start condition @var{s1} or @var{s2}
-@end table
-
-Note that inside of a character class, all regular
-expression operators lose their special meaning except escape
-('\') and the character class operators, '-', ']', and, at
-the beginning of the class, '^'.
-
-The regular expressions listed above are grouped according
-to precedence, from highest precedence at the top to
-lowest at the bottom.  Those grouped together have equal
-precedence.  For example,
-
-@example
-foo|bar*
-@end example
-
-@noindent
-is the same as
-
-@example
-(foo)|(ba(r*))
-@end example
-
-@noindent
-since the '*' operator has higher precedence than
-concatenation, and concatenation higher than alternation ('|').
-This pattern therefore matches @emph{either} the string "foo" @emph{or}
-the string "ba" followed by zero-or-more r's.  To match
-"foo" or zero-or-more "bar"'s, use:
-
-@example
-foo|(bar)*
-@end example
-
-@noindent
-and to match zero-or-more "foo"'s-or-"bar"'s:
-
-@example
-(foo|bar)*
-@end example
-
-In addition to characters and ranges of characters,
-character classes can also contain character class
-@dfn{expressions}.  These are expressions enclosed inside @samp{[}: and @samp{:}]
-delimiters (which themselves must appear between the '['
-and ']' of the character class; other elements may occur
-inside the character class, too).  The valid expressions
-are:
-
-@example
-[:alnum:] [:alpha:] [:blank:]
-[:cntrl:] [:digit:] [:graph:]
-[:lower:] [:print:] [:punct:]
-[:space:] [:upper:] [:xdigit:]
-@end example
-
-These expressions all designate a set of characters
-equivalent to the corresponding standard C @samp{isXXX} function.  For
-example, @samp{[:alnum:]} designates those characters for which
-@samp{isalnum()} returns true - i.e., any alphabetic or numeric.
-Some systems don't provide @samp{isblank()}, so flex defines
-@samp{[:blank:]} as a blank or a tab.
-
-For example, the following character classes are all
-equivalent:
-
-@example
-[[:alnum:]]
-[[:alpha:][:digit:]
-[[:alpha:]0-9]
-[a-zA-Z0-9]
-@end example
-
-If your scanner is case-insensitive (the @samp{-i} flag), then
-@samp{[:upper:]} and @samp{[:lower:]} are equivalent to @samp{[:alpha:]}.
-
-Some notes on patterns:
-
-@itemize -
-@item
-A negated character class such as the example
-"[^A-Z]" above @emph{will match a newline} unless "\n" (or an
-equivalent escape sequence) is one of the
-characters explicitly present in the negated character
-class (e.g., "[^A-Z\n]").  This is unlike how many
-other regular expression tools treat negated
-character classes, but unfortunately the inconsistency
-is historically entrenched.  Matching newlines
-means that a pattern like [^"]* can match the
-entire input unless there's another quote in the
-input.
-
-@item
-A rule can have at most one instance of trailing
-context (the '/' operator or the '$' operator).
-The start condition, '^', and "<<EOF>>" patterns
-can only occur at the beginning of a pattern, and,
-as well as with '/' and '$', cannot be grouped
-inside parentheses.  A '^' which does not occur at
-the beginning of a rule or a '$' which does not
-occur at the end of a rule loses its special
-properties and is treated as a normal character.
-
-The following are illegal:
-
-@example
-foo/bar$
-<sc1>foo<sc2>bar
-@end example
-
-Note that the first of these, can be written
-"foo/bar\n".
-
-The following will result in '$' or '^' being
-treated as a normal character:
-
-@example
-foo|(bar$)
-foo|^bar
-@end example
-
-If what's wanted is a "foo" or a
-bar-followed-by-a-newline, the following could be used (the special
-'|' action is explained below):
-
-@example
-foo      |
-bar$     /* action goes here */
-@end example
-
-A similar trick will work for matching a foo or a
-bar-at-the-beginning-of-a-line.
-@end itemize
-
-@node Matching, Actions, Patterns, Top
-@section How the input is matched
-
-When the generated scanner is run, it analyzes its input
-looking for strings which match any of its patterns.  If
-it finds more than one match, it takes the one matching
-the most text (for trailing context rules, this includes
-the length of the trailing part, even though it will then
-be returned to the input).  If it finds two or more
-matches of the same length, the rule listed first in the
-@code{flex} input file is chosen.
-
-Once the match is determined, the text corresponding to
-the match (called the @var{token}) is made available in the
-global character pointer @code{yytext}, and its length in the
-global integer @code{yyleng}.  The @var{action} corresponding to the
-matched pattern is then executed (a more detailed
-description of actions follows), and then the remaining input is
-scanned for another match.
-
-If no match is found, then the @dfn{default rule} is executed:
-the next character in the input is considered matched and
-copied to the standard output.  Thus, the simplest legal
-@code{flex} input is:
-
-@example
-%%
-@end example
-
-which generates a scanner that simply copies its input
-(one character at a time) to its output.
-
-Note that @code{yytext} can be defined in two different ways:
-either as a character @emph{pointer} or as a character @emph{array}.
-You can control which definition @code{flex} uses by including
-one of the special directives @samp{%pointer} or @samp{%array} in the
-first (definitions) section of your flex input.  The
-default is @samp{%pointer}, unless you use the @samp{-l} lex
-compatibility option, in which case @code{yytext} will be an array.  The
-advantage of using @samp{%pointer} is substantially faster
-scanning and no buffer overflow when matching very large
-tokens (unless you run out of dynamic memory).  The
-disadvantage is that you are restricted in how your actions can
-modify @code{yytext} (see the next section), and calls to the
-@samp{unput()} function destroys the present contents of @code{yytext},
-which can be a considerable porting headache when moving
-between different @code{lex} versions.
-
-The advantage of @samp{%array} is that you can then modify @code{yytext}
-to your heart's content, and calls to @samp{unput()} do not
-destroy @code{yytext} (see below).  Furthermore, existing @code{lex}
-programs sometimes access @code{yytext} externally using
-declarations of the form:
-@example
-extern char yytext[];
-@end example
-This definition is erroneous when used with @samp{%pointer}, but
-correct for @samp{%array}.
-
-@samp{%array} defines @code{yytext} to be an array of @code{YYLMAX} characters,
-which defaults to a fairly large value.  You can change
-the size by simply #define'ing @code{YYLMAX} to a different value
-in the first section of your @code{flex} input.  As mentioned
-above, with @samp{%pointer} yytext grows dynamically to
-accommodate large tokens.  While this means your @samp{%pointer} scanner
-can accommodate very large tokens (such as matching entire
-blocks of comments), bear in mind that each time the
-scanner must resize @code{yytext} it also must rescan the entire
-token from the beginning, so matching such tokens can
-prove slow.  @code{yytext} presently does @emph{not} dynamically grow if
-a call to @samp{unput()} results in too much text being pushed
-back; instead, a run-time error results.
-
-Also note that you cannot use @samp{%array} with C++ scanner
-classes (the @code{c++} option; see below).
-
-@node Actions, Generated scanner, Matching, Top
-@section Actions
-
-Each pattern in a rule has a corresponding action, which
-can be any arbitrary C statement.  The pattern ends at the
-first non-escaped whitespace character; the remainder of
-the line is its action.  If the action is empty, then when
-the pattern is matched the input token is simply
-discarded.  For example, here is the specification for a
-program which deletes all occurrences of "zap me" from its
-input:
-
-@example
-%%
-"zap me"
-@end example
-
-(It will copy all other characters in the input to the
-output since they will be matched by the default rule.)
-
-Here is a program which compresses multiple blanks and
-tabs down to a single blank, and throws away whitespace
-found at the end of a line:
-
-@example
-%%
-[ \t]+        putchar( ' ' );
-[ \t]+$       /* ignore this token */
-@end example
-
-If the action contains a '@{', then the action spans till
-the balancing '@}' is found, and the action may cross
-multiple lines.  @code{flex} knows about C strings and comments and
-won't be fooled by braces found within them, but also
-allows actions to begin with @samp{%@{} and will consider the
-action to be all the text up to the next @samp{%@}} (regardless of
-ordinary braces inside the action).
-
-An action consisting solely of a vertical bar ('|') means
-"same as the action for the next rule." See below for an
-illustration.
-
-Actions can include arbitrary C code, including @code{return}
-statements to return a value to whatever routine called
-@samp{yylex()}.  Each time @samp{yylex()} is called it continues
-processing tokens from where it last left off until it either
-reaches the end of the file or executes a return.
-
-Actions are free to modify @code{yytext} except for lengthening
-it (adding characters to its end--these will overwrite
-later characters in the input stream).  This however does
-not apply when using @samp{%array} (see above); in that case,
-@code{yytext} may be freely modified in any way.
-
-Actions are free to modify @code{yyleng} except they should not
-do so if the action also includes use of @samp{yymore()} (see
-below).
-
-There are a number of special directives which can be
-included within an action:
-
-@itemize -
-@item
-@samp{ECHO} copies yytext to the scanner's output.
-
-@item
-@code{BEGIN} followed by the name of a start condition
-places the scanner in the corresponding start
-condition (see below).
-
-@item
-@code{REJECT} directs the scanner to proceed on to the
-"second best" rule which matched the input (or a
-prefix of the input).  The rule is chosen as
-described above in "How the Input is Matched", and
-@code{yytext} and @code{yyleng} set up appropriately.  It may
-either be one which matched as much text as the
-originally chosen rule but came later in the @code{flex}
-input file, or one which matched less text.  For
-example, the following will both count the words in
-the input and call the routine special() whenever
-"frob" is seen:
-
-@example
-        int word_count = 0;
-%%
-
-frob        special(); REJECT;
-[^ \t\n]+   ++word_count;
-@end example
-
-Without the @code{REJECT}, any "frob"'s in the input would
-not be counted as words, since the scanner normally
-executes only one action per token.  Multiple
-@code{REJECT's} are allowed, each one finding the next
-best choice to the currently active rule.  For
-example, when the following scanner scans the token
-"abcd", it will write "abcdabcaba" to the output:
-
-@example
-%%
-a        |
-ab       |
-abc      |
-abcd     ECHO; REJECT;
-.|\n     /* eat up any unmatched character */
-@end example
-
-(The first three rules share the fourth's action
-since they use the special '|' action.)  @code{REJECT} is
-a particularly expensive feature in terms of
-scanner performance; if it is used in @emph{any} of the
-scanner's actions it will slow down @emph{all} of the
-scanner's matching.  Furthermore, @code{REJECT} cannot be used
-with the @samp{-Cf} or @samp{-CF} options (see below).
-
-Note also that unlike the other special actions,
-@code{REJECT} is a @emph{branch}; code immediately following it
-in the action will @emph{not} be executed.
-
-@item
-@samp{yymore()} tells the scanner that the next time it
-matches a rule, the corresponding token should be
-@emph{appended} onto the current value of @code{yytext} rather
-than replacing it.  For example, given the input
-"mega-kludge" the following will write
-"mega-mega-kludge" to the output:
-
-@example
-%%
-mega-    ECHO; yymore();
-kludge   ECHO;
-@end example
-
-First "mega-" is matched and echoed to the output.
-Then "kludge" is matched, but the previous "mega-"
-is still hanging around at the beginning of @code{yytext}
-so the @samp{ECHO} for the "kludge" rule will actually
-write "mega-kludge".
-@end itemize
-
-Two notes regarding use of @samp{yymore()}.  First, @samp{yymore()}
-depends on the value of @code{yyleng} correctly reflecting the
-size of the current token, so you must not modify @code{yyleng}
-if you are using @samp{yymore()}.  Second, the presence of
-@samp{yymore()} in the scanner's action entails a minor
-performance penalty in the scanner's matching speed.
-
-@itemize -
-@item
-@samp{yyless(n)} returns all but the first @var{n} characters of
-the current token back to the input stream, where
-they will be rescanned when the scanner looks for
-the next match.  @code{yytext} and @code{yyleng} are adjusted
-appropriately (e.g., @code{yyleng} will now be equal to @var{n}
-).  For example, on the input "foobar" the
-following will write out "foobarbar":
-
-@example
-%%
-foobar    ECHO; yyless(3);
-[a-z]+    ECHO;
-@end example
-
-An argument of 0 to @code{yyless} will cause the entire
-current input string to be scanned again.  Unless
-you've changed how the scanner will subsequently
-process its input (using @code{BEGIN}, for example), this
-will result in an endless loop.
-
-Note that @code{yyless} is a macro and can only be used in the
-flex input file, not from other source files.
-
-@item
-@samp{unput(c)} puts the character @code{c} back onto the input
-stream.  It will be the next character scanned.
-The following action will take the current token
-and cause it to be rescanned enclosed in
-parentheses.
-
-@example
-@{
-int i;
-/* Copy yytext because unput() trashes yytext */
-char *yycopy = strdup( yytext );
-unput( ')' );
-for ( i = yyleng - 1; i >= 0; --i )
-    unput( yycopy[i] );
-unput( '(' );
-free( yycopy );
-@}
-@end example
-
-Note that since each @samp{unput()} puts the given
-character back at the @emph{beginning} of the input stream,
-pushing back strings must be done back-to-front.
-An important potential problem when using @samp{unput()} is that
-if you are using @samp{%pointer} (the default), a call to @samp{unput()}
-@emph{destroys} the contents of @code{yytext}, starting with its
-rightmost character and devouring one character to the left
-with each call.  If you need the value of yytext preserved
-after a call to @samp{unput()} (as in the above example), you
-must either first copy it elsewhere, or build your scanner
-using @samp{%array} instead (see How The Input Is Matched).
-
-Finally, note that you cannot put back @code{EOF} to attempt to
-mark the input stream with an end-of-file.
-
-@item
-@samp{input()} reads the next character from the input
-stream.  For example, the following is one way to
-eat up C comments:
-
-@example
-%%
-"/*"        @{
-            register int c;
-
-            for ( ; ; )
-                @{
-                while ( (c = input()) != '*' &&
-                        c != EOF )
-                    ;    /* eat up text of comment */
-
-                if ( c == '*' )
-                    @{
-                    while ( (c = input()) == '*' )
-                        ;
-                    if ( c == '/' )
-                        break;    /* found the end */
-                    @}
-
-                if ( c == EOF )
-                    @{
-                    error( "EOF in comment" );
-                    break;
-                    @}
-                @}
-            @}
-@end example
-
-(Note that if the scanner is compiled using @samp{C++},
-then @samp{input()} is instead referred to as @samp{yyinput()},
-in order to avoid a name clash with the @samp{C++} stream
-by the name of @code{input}.)
-
-@item YY_FLUSH_BUFFER
-flushes the scanner's internal buffer so that the next time the scanner
-attempts to match a token, it will first refill the buffer using
-@code{YY_INPUT} (see The Generated Scanner, below).  This action is
-a special case of the more general @samp{yy_flush_buffer()} function,
-described below in the section Multiple Input Buffers.
-
-@item
-@samp{yyterminate()} can be used in lieu of a return
-statement in an action.  It terminates the scanner
-and returns a 0 to the scanner's caller, indicating
-"all done".  By default, @samp{yyterminate()} is also
-called when an end-of-file is encountered.  It is a
-macro and may be redefined.
-@end itemize
-
-@node Generated scanner, Start conditions, Actions, Top
-@section The generated scanner
-
-The output of @code{flex} is the file @file{lex.yy.c}, which contains
-the scanning routine @samp{yylex()}, a number of tables used by
-it for matching tokens, and a number of auxiliary routines
-and macros.  By default, @samp{yylex()} is declared as follows:
-
-@example
-int yylex()
-    @{
-    @dots{} various definitions and the actions in here @dots{}
-    @}
-@end example
-
-(If your environment supports function prototypes, then it
-will be "int yylex( void  )".)   This  definition  may  be
-changed by defining the "YY_DECL" macro.  For example, you
-could use:
-
-@example
-#define YY_DECL float lexscan( a, b ) float a, b;
-@end example
-
-to give the scanning routine the name @code{lexscan}, returning a
-float, and taking two floats as arguments.  Note that if
-you give arguments to the scanning routine using a
-K&R-style/non-prototyped function declaration, you must
-terminate the definition with a semi-colon (@samp{;}).
-
-Whenever @samp{yylex()} is called, it scans tokens from the
-global input file @code{yyin} (which defaults to stdin).  It
-continues until it either reaches an end-of-file (at which
-point it returns the value 0) or one of its actions
-executes a @code{return} statement.
-
-If the scanner reaches an end-of-file, subsequent calls are undefined
-unless either @code{yyin} is pointed at a new input file (in which case
-scanning continues from that file), or @samp{yyrestart()} is called.
-@samp{yyrestart()} takes one argument, a @samp{FILE *} pointer (which
-can be nil, if you've set up @code{YY_INPUT} to scan from a source
-other than @code{yyin}), and initializes @code{yyin} for scanning from
-that file.  Essentially there is no difference between just assigning
-@code{yyin} to a new input file or using @samp{yyrestart()} to do so;
-the latter is available for compatibility with previous versions of
-@code{flex}, and because it can be used to switch input files in the
-middle of scanning.  It can also be used to throw away the current
-input buffer, by calling it with an argument of @code{yyin}; but
-better is to use @code{YY_FLUSH_BUFFER} (see above).  Note that
-@samp{yyrestart()} does @emph{not} reset the start condition to
-@code{INITIAL} (see Start Conditions, below).
-
-
-If @samp{yylex()} stops scanning due to executing a @code{return}
-statement in one of the actions, the scanner may then be called
-again and it will resume scanning where it left off.
-
-By default (and for purposes of efficiency), the scanner
-uses block-reads rather than simple @samp{getc()} calls to read
-characters from @code{yyin}.  The nature of how it gets its input
-can be controlled by defining the @code{YY_INPUT} macro.
-YY_INPUT's calling sequence is
-"YY_INPUT(buf,result,max_size)".  Its action is to place
-up to @var{max_size} characters in the character array @var{buf} and
-return in the integer variable @var{result} either the number of
-characters read or the constant YY_NULL (0 on Unix
-systems) to indicate EOF.  The default YY_INPUT reads from
-the global file-pointer "yyin".
-
-A sample definition of YY_INPUT (in the definitions
-section of the input file):
-
-@example
-%@{
-#define YY_INPUT(buf,result,max_size) \
-    @{ \
-    int c = getchar(); \
-    result = (c == EOF) ? YY_NULL : (buf[0] = c, 1); \
-    @}
-%@}
-@end example
-
-This definition will change the input processing to occur
-one character at a time.
-
-When the scanner receives an end-of-file indication from
-YY_INPUT, it then checks the @samp{yywrap()} function.  If
-@samp{yywrap()} returns false (zero), then it is assumed that the
-function has gone ahead and set up @code{yyin} to point to
-another input file, and scanning continues.  If it returns
-true (non-zero), then the scanner terminates, returning 0
-to its caller.  Note that in either case, the start
-condition remains unchanged; it does @emph{not} revert to @code{INITIAL}.
-
-If you do not supply your own version of @samp{yywrap()}, then you
-must either use @samp{%option noyywrap} (in which case the scanner
-behaves as though @samp{yywrap()} returned 1), or you must link with
-@samp{-lfl} to obtain the default version of the routine, which always
-returns 1.
-
-Three routines are available for scanning from in-memory
-buffers rather than files: @samp{yy_scan_string()},
-@samp{yy_scan_bytes()}, and @samp{yy_scan_buffer()}.  See the discussion
-of them below in the section Multiple Input Buffers.
-
-The scanner writes its @samp{ECHO} output to the @code{yyout} global
-(default, stdout), which may be redefined by the user
-simply by assigning it to some other @code{FILE} pointer.
-
-@node Start conditions, Multiple buffers, Generated scanner, Top
-@section Start conditions
-
-@code{flex} provides a mechanism for conditionally activating
-rules.  Any rule whose pattern is prefixed with "<sc>"
-will only be active when the scanner is in the start
-condition named "sc".  For example,
-
-@example
-<STRING>[^"]*        @{ /* eat up the string body ... */
-            @dots{}
-            @}
-@end example
-
-@noindent
-will be active only when the scanner is in the "STRING"
-start condition, and
-
-@example
-<INITIAL,STRING,QUOTE>\.        @{ /* handle an escape ... */
-            @dots{}
-            @}
-@end example
-
-@noindent
-will be active only when the current start condition is
-either "INITIAL", "STRING", or "QUOTE".
-
-Start conditions are declared in the definitions (first)
-section of the input using unindented lines beginning with
-either @samp{%s} or @samp{%x} followed by a list of names.  The former
-declares @emph{inclusive} start conditions, the latter @emph{exclusive}
-start conditions.  A start condition is activated using
-the @code{BEGIN} action.  Until the next @code{BEGIN} action is
-executed, rules with the given start condition will be active
-and rules with other start conditions will be inactive.
-If the start condition is @emph{inclusive}, then rules with no
-start conditions at all will also be active.  If it is
-@emph{exclusive}, then @emph{only} rules qualified with the start
-condition will be active.  A set of rules contingent on the
-same exclusive start condition describe a scanner which is
-independent of any of the other rules in the @code{flex} input.
-Because of this, exclusive start conditions make it easy
-to specify "mini-scanners" which scan portions of the
-input that are syntactically different from the rest
-(e.g., comments).
-
-If the distinction between inclusive and exclusive start
-conditions is still a little vague, here's a simple
-example illustrating the connection between the two.  The set
-of rules:
-
-@example
-%s example
-%%
-
-<example>foo   do_something();
-
-bar            something_else();
-@end example
-
-@noindent
-is equivalent to
-
-@example
-%x example
-%%
-
-<example>foo   do_something();
-
-<INITIAL,example>bar    something_else();
-@end example
-
-Without the @samp{<INITIAL,example>} qualifier, the @samp{bar} pattern
-in the second example wouldn't be active (i.e., couldn't match) when
-in start condition @samp{example}.  If we just used @samp{<example>}
-to qualify @samp{bar}, though, then it would only be active in
-@samp{example} and not in @code{INITIAL}, while in the first example
-it's active in both, because in the first example the @samp{example}
-starting condition is an @emph{inclusive} (@samp{%s}) start condition.
-
-Also note that the special start-condition specifier @samp{<*>}
-matches every start condition.  Thus, the above example
-could also have been written;
-
-@example
-%x example
-%%
-
-<example>foo   do_something();
-
-<*>bar    something_else();
-@end example
-
-The default rule (to @samp{ECHO} any unmatched character) remains
-active in start conditions.  It is equivalent to:
-
-@example
-<*>.|\\n     ECHO;
-@end example
-
-@samp{BEGIN(0)} returns to the original state where only the
-rules with no start conditions are active.  This state can
-also be referred to as the start-condition "INITIAL", so
-@samp{BEGIN(INITIAL)} is equivalent to @samp{BEGIN(0)}.  (The
-parentheses around the start condition name are not required but
-are considered good style.)
-
-@code{BEGIN} actions can also be given as indented code at the
-beginning of the rules section.  For example, the
-following will cause the scanner to enter the "SPECIAL" start
-condition whenever @samp{yylex()} is called and the global
-variable @code{enter_special} is true:
-
-@example
-        int enter_special;
-
-%x SPECIAL
-%%
-        if ( enter_special )
-            BEGIN(SPECIAL);
-
-<SPECIAL>blahblahblah
-@dots{}more rules follow@dots{}
-@end example
-
-To illustrate the uses of start conditions, here is a
-scanner which provides two different interpretations of a
-string like "123.456".  By default it will treat it as as
-three tokens, the integer "123", a dot ('.'), and the
-integer "456".  But if the string is preceded earlier in
-the line by the string "expect-floats" it will treat it as
-a single token, the floating-point number 123.456:
-
-@example
-%@{
-#include <math.h>
-%@}
-%s expect
-
-%%
-expect-floats        BEGIN(expect);
-
-<expect>[0-9]+"."[0-9]+      @{
-            printf( "found a float, = %f\n",
-                    atof( yytext ) );
-            @}
-<expect>\n           @{
-            /* that's the end of the line, so
-             * we need another "expect-number"
-             * before we'll recognize any more
-             * numbers
-             */
-            BEGIN(INITIAL);
-            @}
-
-[0-9]+      @{
-
-Version 2.5               December 1994                        18
-
-            printf( "found an integer, = %d\n",
-                    atoi( yytext ) );
-            @}
-
-"."         printf( "found a dot\n" );
-@end example
-
-Here is a scanner which recognizes (and discards) C
-comments while maintaining a count of the current input line.
-
-@example
-%x comment
-%%
-        int line_num = 1;
-
-"/*"         BEGIN(comment);
-
-<comment>[^*\n]*        /* eat anything that's not a '*' */
-<comment>"*"+[^*/\n]*   /* eat up '*'s not followed by '/'s */
-<comment>\n             ++line_num;
-<comment>"*"+"/"        BEGIN(INITIAL);
-@end example
-
-This scanner goes to a bit of trouble to match as much
-text as possible with each rule.  In general, when
-attempting to write a high-speed scanner try to match as
-much possible in each rule, as it's a big win.
-
-Note that start-conditions names are really integer values
-and can be stored as such.  Thus, the above could be
-extended in the following fashion:
-
-@example
-%x comment foo
-%%
-        int line_num = 1;
-        int comment_caller;
-
-"/*"         @{
-             comment_caller = INITIAL;
-             BEGIN(comment);
-             @}
-
-@dots{}
-
-<foo>"/*"    @{
-             comment_caller = foo;
-             BEGIN(comment);
-             @}
-
-<comment>[^*\n]*        /* eat anything that's not a '*' */
-<comment>"*"+[^*/\n]*   /* eat up '*'s not followed by '/'s */
-<comment>\n             ++line_num;
-<comment>"*"+"/"        BEGIN(comment_caller);
-@end example
-
-Furthermore, you can access the current start condition
-using the integer-valued @code{YY_START} macro.  For example, the
-above assignments to @code{comment_caller} could instead be
-written
-
-@example
-comment_caller = YY_START;
-@end example
-
-Flex provides @code{YYSTATE} as an alias for @code{YY_START} (since that
-is what's used by AT&T @code{lex}).
-
-Note that start conditions do not have their own
-name-space; %s's and %x's declare names in the same fashion as
-#define's.
-
-Finally, here's an example of how to match C-style quoted
-strings using exclusive start conditions, including
-expanded escape sequences (but not including checking for
-a string that's too long):
-
-@example
-%x str
-
-%%
-        char string_buf[MAX_STR_CONST];
-        char *string_buf_ptr;
-
-\"      string_buf_ptr = string_buf; BEGIN(str);
-
-<str>\"        @{ /* saw closing quote - all done */
-        BEGIN(INITIAL);
-        *string_buf_ptr = '\0';
-        /* return string constant token type and
-         * value to parser
-         */
-        @}
-
-<str>\n        @{
-        /* error - unterminated string constant */
-        /* generate error message */
-        @}
-
-<str>\\[0-7]@{1,3@} @{
-        /* octal escape sequence */
-        int result;
-
-        (void) sscanf( yytext + 1, "%o", &result );
-
-        if ( result > 0xff )
-                /* error, constant is out-of-bounds */
-
-        *string_buf_ptr++ = result;
-        @}
-
-<str>\\[0-9]+ @{
-        /* generate error - bad escape sequence; something
-         * like '\48' or '\0777777'
-         */
-        @}
-
-<str>\\n  *string_buf_ptr++ = '\n';
-<str>\\t  *string_buf_ptr++ = '\t';
-<str>\\r  *string_buf_ptr++ = '\r';
-<str>\\b  *string_buf_ptr++ = '\b';
-<str>\\f  *string_buf_ptr++ = '\f';
-
-<str>\\(.|\n)  *string_buf_ptr++ = yytext[1];
-
-<str>[^\\\n\"]+        @{
-        char *yptr = yytext;
-
-        while ( *yptr )
-                *string_buf_ptr++ = *yptr++;
-        @}
-@end example
-
-Often, such as in some of the examples above, you wind up
-writing a whole bunch of rules all preceded by the same
-start condition(s).  Flex makes this a little easier and
-cleaner by introducing a notion of start condition @dfn{scope}.
-A start condition scope is begun with:
-
-@example
-<SCs>@{
-@end example
-
-@noindent
-where SCs is a list of one or more start conditions.
-Inside the start condition scope, every rule automatically
-has the prefix @samp{<SCs>} applied to it, until a @samp{@}} which
-matches the initial @samp{@{}.  So, for example,
-
-@example
-<ESC>@{
-    "\\n"   return '\n';
-    "\\r"   return '\r';
-    "\\f"   return '\f';
-    "\\0"   return '\0';
-@}
-@end example
-
-@noindent
-is equivalent to:
-
-@example
-<ESC>"\\n"  return '\n';
-<ESC>"\\r"  return '\r';
-<ESC>"\\f"  return '\f';
-<ESC>"\\0"  return '\0';
-@end example
-
-Start condition scopes may be nested.
-
-Three routines are available for manipulating stacks of
-start conditions:
-
-@table @samp
-@item void yy_push_state(int new_state)
-pushes the current start condition onto the top of
-the start condition stack and switches to @var{new_state}
-as though you had used @samp{BEGIN new_state} (recall that
-start condition names are also integers).
-
-@item void yy_pop_state()
-pops the top of the stack and switches to it via
-@code{BEGIN}.
-
-@item int yy_top_state()
-returns the top of the stack without altering the
-stack's contents.
-@end table
-
-The start condition stack grows dynamically and so has no
-built-in size limitation.  If memory is exhausted, program
-execution aborts.
-
-To use start condition stacks, your scanner must include a
-@samp{%option stack} directive (see Options below).
-
-@node Multiple buffers, End-of-file rules, Start conditions, Top
-@section Multiple input buffers
-
-Some scanners (such as those which support "include"
-files) require reading from several input streams.  As
-@code{flex} scanners do a large amount of buffering, one cannot
-control where the next input will be read from by simply
-writing a @code{YY_INPUT} which is sensitive to the scanning
-context.  @code{YY_INPUT} is only called when the scanner reaches
-the end of its buffer, which may be a long time after
-scanning a statement such as an "include" which requires
-switching the input source.
-
-To negotiate these sorts of problems, @code{flex} provides a
-mechanism for creating and switching between multiple
-input buffers.  An input buffer is created by using:
-
-@example
-YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
-@end example
-
-@noindent
-which takes a @code{FILE} pointer and a size and creates a buffer
-associated with the given file and large enough to hold
-@var{size} characters (when in doubt, use @code{YY_BUF_SIZE} for the
-size).  It returns a @code{YY_BUFFER_STATE} handle, which may
-then be passed to other routines (see below).  The
-@code{YY_BUFFER_STATE} type is a pointer to an opaque @code{struct}
-@code{yy_buffer_state} structure, so you may safely initialize
-YY_BUFFER_STATE variables to @samp{((YY_BUFFER_STATE) 0)} if you
-wish, and also refer to the opaque structure in order to
-correctly declare input buffers in source files other than
-that of your scanner.  Note that the @code{FILE} pointer in the
-call to @code{yy_create_buffer} is only used as the value of @code{yyin}
-seen by @code{YY_INPUT}; if you redefine @code{YY_INPUT} so it no longer
-uses @code{yyin}, then you can safely pass a nil @code{FILE} pointer to
-@code{yy_create_buffer}.  You select a particular buffer to scan
-from using:
-
-@example
-void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
-@end example
-
-switches the scanner's input buffer so subsequent tokens
-will come from @var{new_buffer}.  Note that
-@samp{yy_switch_to_buffer()} may be used by @samp{yywrap()} to set
-things up for continued scanning, instead of opening a new
-file and pointing @code{yyin} at it.  Note also that switching
-input sources via either @samp{yy_switch_to_buffer()} or @samp{yywrap()}
-does @emph{not} change the start condition.
-
-@example
-void yy_delete_buffer( YY_BUFFER_STATE buffer )
-@end example
-
-@noindent
-is used to reclaim the storage associated with a buffer.
-You can also clear the current contents of a buffer using:
-
-@example
-void yy_flush_buffer( YY_BUFFER_STATE buffer )
-@end example
-
-This function discards the buffer's contents, so the next time the
-scanner attempts to match a token from the buffer, it will first fill
-the buffer anew using @code{YY_INPUT}.
-
-@samp{yy_new_buffer()} is an alias for @samp{yy_create_buffer()},
-provided for compatibility with the C++ use of @code{new} and @code{delete}
-for creating and destroying dynamic objects.
-
-Finally, the @code{YY_CURRENT_BUFFER} macro returns a
-@code{YY_BUFFER_STATE} handle to the current buffer.
-
-Here is an example of using these features for writing a
-scanner which expands include files (the @samp{<<EOF>>} feature
-is discussed below):
-
-@example
-/* the "incl" state is used for picking up the name
- * of an include file
- */
-%x incl
-
-%@{
-#define MAX_INCLUDE_DEPTH 10
-YY_BUFFER_STATE include_stack[MAX_INCLUDE_DEPTH];
-int include_stack_ptr = 0;
-%@}
-
-%%
-include             BEGIN(incl);
-
-[a-z]+              ECHO;
-[^a-z\n]*\n?        ECHO;
-
-<incl>[ \t]*      /* eat the whitespace */
-<incl>[^ \t\n]+   @{ /* got the include file name */
-        if ( include_stack_ptr >= MAX_INCLUDE_DEPTH )
-            @{
-            fprintf( stderr, "Includes nested too deeply" );
-            exit( 1 );
-            @}
-
-        include_stack[include_stack_ptr++] =
-            YY_CURRENT_BUFFER;
-
-        yyin = fopen( yytext, "r" );
-
-        if ( ! yyin )
-            error( @dots{} );
-
-        yy_switch_to_buffer(
-            yy_create_buffer( yyin, YY_BUF_SIZE ) );
-
-        BEGIN(INITIAL);
-        @}
-
-<<EOF>> @{
-        if ( --include_stack_ptr < 0 )
-            @{
-            yyterminate();
-            @}
-
-        else
-            @{
-            yy_delete_buffer( YY_CURRENT_BUFFER );
-            yy_switch_to_buffer(
-                 include_stack[include_stack_ptr] );
-            @}
-        @}
-@end example
-
-Three routines are available for setting up input buffers
-for scanning in-memory strings instead of files.  All of
-them create a new input buffer for scanning the string,
-and return a corresponding @code{YY_BUFFER_STATE} handle (which
-you should delete with @samp{yy_delete_buffer()} when done with
-it).  They also switch to the new buffer using
-@samp{yy_switch_to_buffer()}, so the next call to @samp{yylex()} will
-start scanning the string.
-
-@table @samp
-@item yy_scan_string(const char *str)
-scans a NUL-terminated string.
-
-@item yy_scan_bytes(const char *bytes, int len)
-scans @code{len} bytes (including possibly NUL's) starting
-at location @var{bytes}.
-@end table
-
-Note that both of these functions create and scan a @emph{copy}
-of the string or bytes.  (This may be desirable, since
-@samp{yylex()} modifies the contents of the buffer it is
-scanning.) You can avoid the copy by using:
-
-@table @samp
-@item yy_scan_buffer(char *base, yy_size_t size)
-which scans in place the buffer starting at @var{base},
-consisting of @var{size} bytes, the last two bytes of
-which @emph{must} be @code{YY_END_OF_BUFFER_CHAR} (ASCII NUL).
-These last two bytes are not scanned; thus,
-scanning consists of @samp{base[0]} through @samp{base[size-2]},
-inclusive.
-
-If you fail to set up @var{base} in this manner (i.e.,
-forget the final two @code{YY_END_OF_BUFFER_CHAR} bytes),
-then @samp{yy_scan_buffer()} returns a nil pointer instead
-of creating a new input buffer.
-
-The type @code{yy_size_t} is an integral type to which you
-can cast an integer expression reflecting the size
-of the buffer.
-@end table
-
-@node End-of-file rules, Miscellaneous, Multiple buffers, Top
-@section End-of-file rules
-
-The special rule "<<EOF>>" indicates actions which are to
-be taken when an end-of-file is encountered and yywrap()
-returns non-zero (i.e., indicates no further files to
-process).  The action must finish by doing one of four
-things:
-
-@itemize -
-@item
-assigning @code{yyin} to a new input file (in previous
-versions of flex, after doing the assignment you
-had to call the special action @code{YY_NEW_FILE}; this is
-no longer necessary);
-
-@item
-executing a @code{return} statement;
-
-@item
-executing the special @samp{yyterminate()} action;
-
-@item
-or, switching to a new buffer using
-@samp{yy_switch_to_buffer()} as shown in the example
-above.
-@end itemize
-
-<<EOF>> rules may not be used with other patterns; they
-may only be qualified with a list of start conditions.  If
-an unqualified <<EOF>> rule is given, it applies to @emph{all}
-start conditions which do not already have <<EOF>>
-actions.  To specify an <<EOF>> rule for only the initial
-start condition, use
-
-@example
-<INITIAL><<EOF>>
-@end example
-
-These rules are useful for catching things like unclosed
-comments.  An example:
-
-@example
-%x quote
-%%
-
-@dots{}other rules for dealing with quotes@dots{}
-
-<quote><<EOF>>   @{
-         error( "unterminated quote" );
-         yyterminate();
-         @}
-<<EOF>>  @{
-         if ( *++filelist )
-             yyin = fopen( *filelist, "r" );
-         else
-            yyterminate();
-         @}
-@end example
-
-@node Miscellaneous, User variables, End-of-file rules, Top
-@section Miscellaneous macros
-
-The macro @code{YY_USER_ACTION} can be defined to provide an
-action which is always executed prior to the matched
-rule's action.  For example, it could be #define'd to call
-a routine to convert yytext to lower-case.  When
-@code{YY_USER_ACTION} is invoked, the variable @code{yy_act} gives the
-number of the matched rule (rules are numbered starting
-with 1).  Suppose you want to profile how often each of
-your rules is matched.  The following would do the trick:
-
-@example
-#define YY_USER_ACTION ++ctr[yy_act]
-@end example
-
-where @code{ctr} is an array to hold the counts for the different
-rules.  Note that the macro @code{YY_NUM_RULES} gives the total number
-of rules (including the default rule, even if you use @samp{-s}, so
-a correct declaration for @code{ctr} is:
-
-@example
-int ctr[YY_NUM_RULES];
-@end example
-
-The macro @code{YY_USER_INIT} may be defined to provide an action
-which is always executed before the first scan (and before
-the scanner's internal initializations are done).  For
-example, it could be used to call a routine to read in a
-data table or open a logging file.
-
-The macro @samp{yy_set_interactive(is_interactive)} can be used
-to control whether the current buffer is considered
-@emph{interactive}.  An interactive buffer is processed more slowly,
-but must be used when the scanner's input source is indeed
-interactive to avoid problems due to waiting to fill
-buffers (see the discussion of the @samp{-I} flag below).  A
-non-zero value in the macro invocation marks the buffer as
-interactive, a zero value as non-interactive.  Note that
-use of this macro overrides @samp{%option always-interactive} or
-@samp{%option never-interactive} (see Options below).
-@samp{yy_set_interactive()} must be invoked prior to beginning to
-scan the buffer that is (or is not) to be considered
-interactive.
-
-The macro @samp{yy_set_bol(at_bol)} can be used to control
-whether the current buffer's scanning context for the next
-token match is done as though at the beginning of a line.
-A non-zero macro argument makes rules anchored with
-
-The macro @samp{YY_AT_BOL()} returns true if the next token
-scanned from the current buffer will have '^' rules
-active, false otherwise.
-
-In the generated scanner, the actions are all gathered in
-one large switch statement and separated using @code{YY_BREAK},
-which may be redefined.  By default, it is simply a
-"break", to separate each rule's action from the following
-rule's.  Redefining @code{YY_BREAK} allows, for example, C++
-users to #define YY_BREAK to do nothing (while being very
-careful that every rule ends with a "break" or a
-"return"!) to avoid suffering from unreachable statement
-warnings where because a rule's action ends with "return",
-the @code{YY_BREAK} is inaccessible.
-
-@node User variables, YACC interface, Miscellaneous, Top
-@section Values available to the user
-
-This section summarizes the various values available to
-the user in the rule actions.
-
-@itemize -
-@item
-@samp{char *yytext} holds the text of the current token.
-It may be modified but not lengthened (you cannot
-append characters to the end).
-
-If the special directive @samp{%array} appears in the
-first section of the scanner description, then
-@code{yytext} is instead declared @samp{char yytext[YYLMAX]},
-where @code{YYLMAX} is a macro definition that you can
-redefine in the first section if you don't like the
-default value (generally 8KB).  Using @samp{%array}
-results in somewhat slower scanners, but the value
-of @code{yytext} becomes immune to calls to @samp{input()} and
-@samp{unput()}, which potentially destroy its value when
-@code{yytext} is a character pointer.  The opposite of
-@samp{%array} is @samp{%pointer}, which is the default.
-
-You cannot use @samp{%array} when generating C++ scanner
-classes (the @samp{-+} flag).
-
-@item
-@samp{int yyleng} holds the length of the current token.
-
-@item
-@samp{FILE *yyin} is the file which by default @code{flex} reads
-from.  It may be redefined but doing so only makes
-sense before scanning begins or after an EOF has
-been encountered.  Changing it in the midst of
-scanning will have unexpected results since @code{flex}
-buffers its input; use @samp{yyrestart()} instead.  Once
-scanning terminates because an end-of-file has been
-seen, you can assign @code{yyin} at the new input file and
-then call the scanner again to continue scanning.
-
-@item
-@samp{void yyrestart( FILE *new_file )} may be called to
-point @code{yyin} at the new input file.  The switch-over
-to the new file is immediate (any previously
-buffered-up input is lost).  Note that calling
-@samp{yyrestart()} with @code{yyin} as an argument thus throws
-away the current input buffer and continues
-scanning the same input file.
-
-@item
-@samp{FILE *yyout} is the file to which @samp{ECHO} actions are
-done.  It can be reassigned by the user.
-
-@item
-@code{YY_CURRENT_BUFFER} returns a @code{YY_BUFFER_STATE} handle
-to the current buffer.
-
-@item
-@code{YY_START} returns an integer value corresponding to
-the current start condition.  You can subsequently
-use this value with @code{BEGIN} to return to that start
-condition.
-@end itemize
-
-@node YACC interface, Options, User variables, Top
-@section Interfacing with @code{yacc}
-
-One of the main uses of @code{flex} is as a companion to the @code{yacc}
-parser-generator.  @code{yacc} parsers expect to call a routine
-named @samp{yylex()} to find the next input token.  The routine
-is supposed to return the type of the next token as well
-as putting any associated value in the global @code{yylval}.  To
-use @code{flex} with @code{yacc}, one specifies the @samp{-d} option to @code{yacc} to
-instruct it to generate the file @file{y.tab.h} containing
-definitions of all the @samp{%tokens} appearing in the @code{yacc} input.
-This file is then included in the @code{flex} scanner.  For
-example, if one of the tokens is "TOK_NUMBER", part of the
-scanner might look like:
-
-@example
-%@{
-#include "y.tab.h"
-%@}
-
-%%
-
-[0-9]+        yylval = atoi( yytext ); return TOK_NUMBER;
-@end example
-
-@node Options, Performance, YACC interface, Top
-@section Options
-@code{flex} has the following options:
-
-@table @samp
-@item -b
-Generate backing-up information to @file{lex.backup}.
-This is a list of scanner states which require
-backing up and the input characters on which they
-do so.  By adding rules one can remove backing-up
-states.  If @emph{all} backing-up states are eliminated
-and @samp{-Cf} or @samp{-CF} is used, the generated scanner will
-run faster (see the @samp{-p} flag).  Only users who wish
-to squeeze every last cycle out of their scanners
-need worry about this option.  (See the section on
-Performance Considerations below.)
-
-@item -c
-is a do-nothing, deprecated option included for
-POSIX compliance.
-
-@item -d
-makes the generated scanner run in @dfn{debug} mode.
-Whenever a pattern is recognized and the global
-@code{yy_flex_debug} is non-zero (which is the default),
-the scanner will write to @code{stderr} a line of the
-form:
-
-@example
---accepting rule at line 53 ("the matched text")
-@end example
-
-The line number refers to the location of the rule
-in the file defining the scanner (i.e., the file
-that was fed to flex).  Messages are also generated
-when the scanner backs up, accepts the default
-rule, reaches the end of its input buffer (or
-encounters a NUL; at this point, the two look the
-same as far as the scanner's concerned), or reaches
-an end-of-file.
-
-@item -f
-specifies @dfn{fast scanner}.  No table compression is
-done and stdio is bypassed.  The result is large
-but fast.  This option is equivalent to @samp{-Cfr} (see
-below).
-
-@item -h
-generates a "help" summary of @code{flex's} options to
-@code{stdout} and then exits.  @samp{-?} and @samp{--help} are synonyms
-for @samp{-h}.
-
-@item -i
-instructs @code{flex} to generate a @emph{case-insensitive}
-scanner.  The case of letters given in the @code{flex} input
-patterns will be ignored, and tokens in the input
-will be matched regardless of case.  The matched
-text given in @code{yytext} will have the preserved case
-(i.e., it will not be folded).
-
-@item -l
-turns on maximum compatibility with the original
-AT&T @code{lex} implementation.  Note that this does not
-mean @emph{full} compatibility.  Use of this option costs
-a considerable amount of performance, and it cannot
-be used with the @samp{-+, -f, -F, -Cf}, or @samp{-CF} options.
-For details on the compatibilities it provides, see
-the section "Incompatibilities With Lex And POSIX"
-below.  This option also results in the name
-@code{YY_FLEX_LEX_COMPAT} being #define'd in the generated
-scanner.
-
-@item -n
-is another do-nothing, deprecated option included
-only for POSIX compliance.
-
-@item -p
-generates a performance report to stderr.  The
-report consists of comments regarding features of
-the @code{flex} input file which will cause a serious loss
-of performance in the resulting scanner.  If you
-give the flag twice, you will also get comments
-regarding features that lead to minor performance
-losses.
-
-Note that the use of @code{REJECT}, @samp{%option yylineno} and
-variable trailing context (see the Deficiencies / Bugs section below)
-entails a substantial performance penalty; use of @samp{yymore()},
-the @samp{^} operator, and the @samp{-I} flag entail minor performance
-penalties.
-
-@item -s
-causes the @dfn{default rule} (that unmatched scanner
-input is echoed to @code{stdout}) to be suppressed.  If
-the scanner encounters input that does not match
-any of its rules, it aborts with an error.  This
-option is useful for finding holes in a scanner's
-rule set.
-
-@item -t
-instructs @code{flex} to write the scanner it generates to
-standard output instead of @file{lex.yy.c}.
-
-@item -v
-specifies that @code{flex} should write to @code{stderr} a
-summary of statistics regarding the scanner it
-generates.  Most of the statistics are meaningless to
-the casual @code{flex} user, but the first line identifies
-the version of @code{flex} (same as reported by @samp{-V}), and
-the next line the flags used when generating the
-scanner, including those that are on by default.
-
-@item -w
-suppresses warning messages.
-
-@item -B
-instructs @code{flex} to generate a @emph{batch} scanner, the
-opposite of @emph{interactive} scanners generated by @samp{-I}
-(see below).  In general, you use @samp{-B} when you are
-@emph{certain} that your scanner will never be used
-interactively, and you want to squeeze a @emph{little} more
-performance out of it.  If your goal is instead to
-squeeze out a @emph{lot} more performance, you should be
-using the @samp{-Cf} or @samp{-CF} options (discussed below),
-which turn on @samp{-B} automatically anyway.
-
-@item -F
-specifies that the @dfn{fast} scanner table
-representation should be used (and stdio bypassed).  This
-representation is about as fast as the full table
-representation @samp{(-f)}, and for some sets of patterns
-will be considerably smaller (and for others,
-larger).  In general, if the pattern set contains
-both "keywords" and a catch-all, "identifier" rule,
-such as in the set:
-
-@example
-"case"    return TOK_CASE;
-"switch"  return TOK_SWITCH;
-...
-"default" return TOK_DEFAULT;
-[a-z]+    return TOK_ID;
-@end example
-
-@noindent
-then you're better off using the full table
-representation.  If only the "identifier" rule is
-present and you then use a hash table or some such to
-detect the keywords, you're better off using @samp{-F}.
-
-This option is equivalent to @samp{-CFr} (see below).  It
-cannot be used with @samp{-+}.
-
-@item -I
-instructs @code{flex} to generate an @emph{interactive} scanner.
-An interactive scanner is one that only looks ahead
-to decide what token has been matched if it
-absolutely must.  It turns out that always looking one
-extra character ahead, even if the scanner has
-already seen enough text to disambiguate the
-current token, is a bit faster than only looking ahead
-when necessary.  But scanners that always look
-ahead give dreadful interactive performance; for
-example, when a user types a newline, it is not
-recognized as a newline token until they enter
-@emph{another} token, which often means typing in another
-whole line.
-
-@code{Flex} scanners default to @emph{interactive} unless you use
-the @samp{-Cf} or @samp{-CF} table-compression options (see
-below).  That's because if you're looking for
-high-performance you should be using one of these
-options, so if you didn't, @code{flex} assumes you'd
-rather trade off a bit of run-time performance for
-intuitive interactive behavior.  Note also that you
-@emph{cannot} use @samp{-I} in conjunction with @samp{-Cf} or @samp{-CF}.
-Thus, this option is not really needed; it is on by
-default for all those cases in which it is allowed.
-
-You can force a scanner to @emph{not} be interactive by
-using @samp{-B} (see above).
-
-@item -L
-instructs @code{flex} not to generate @samp{#line} directives.
-Without this option, @code{flex} peppers the generated
-scanner with #line directives so error messages in
-the actions will be correctly located with respect
-to either the original @code{flex} input file (if the
-errors are due to code in the input file), or
-@file{lex.yy.c} (if the errors are @code{flex's} fault -- you
-should report these sorts of errors to the email
-address given below).
-
-@item -T
-makes @code{flex} run in @code{trace} mode.  It will generate a
-lot of messages to @code{stderr} concerning the form of
-the input and the resultant non-deterministic and
-deterministic finite automata.  This option is
-mostly for use in maintaining @code{flex}.
-
-@item -V
-prints the version number to @code{stdout} and exits.
-@samp{--version} is a synonym for @samp{-V}.
-
-@item -7
-instructs @code{flex} to generate a 7-bit scanner, i.e.,
-one which can only recognized 7-bit characters in
-its input.  The advantage of using @samp{-7} is that the
-scanner's tables can be up to half the size of
-those generated using the @samp{-8} option (see below).
-The disadvantage is that such scanners often hang
-or crash if their input contains an 8-bit
-character.
-
-Note, however, that unless you generate your
-scanner using the @samp{-Cf} or @samp{-CF} table compression options,
-use of @samp{-7} will save only a small amount of table
-space, and make your scanner considerably less
-portable.  @code{Flex's} default behavior is to generate
-an 8-bit scanner unless you use the @samp{-Cf} or @samp{-CF}, in
-which case @code{flex} defaults to generating 7-bit
-scanners unless your site was always configured to
-generate 8-bit scanners (as will often be the case
-with non-USA sites).  You can tell whether flex
-generated a 7-bit or an 8-bit scanner by inspecting
-the flag summary in the @samp{-v} output as described
-above.
-
-Note that if you use @samp{-Cfe} or @samp{-CFe} (those table
-compression options, but also using equivalence
-classes as discussed see below), flex still
-defaults to generating an 8-bit scanner, since
-usually with these compression options full 8-bit
-tables are not much more expensive than 7-bit
-tables.
-
-@item -8
-instructs @code{flex} to generate an 8-bit scanner, i.e.,
-one which can recognize 8-bit characters.  This
-flag is only needed for scanners generated using
-@samp{-Cf} or @samp{-CF}, as otherwise flex defaults to
-generating an 8-bit scanner anyway.
-
-See the discussion of @samp{-7} above for flex's default
-behavior and the tradeoffs between 7-bit and 8-bit
-scanners.
-
-@item -+
-specifies that you want flex to generate a C++
-scanner class.  See the section on Generating C++
-Scanners below for details.
-
-@item -C[aefFmr]
-controls the degree of table compression and, more
-generally, trade-offs between small scanners and
-fast scanners.
-
-@samp{-Ca} ("align") instructs flex to trade off larger
-tables in the generated scanner for faster
-performance because the elements of the tables are better
-aligned for memory access and computation.  On some
-RISC architectures, fetching and manipulating
-long-words is more efficient than with smaller-sized
-units such as shortwords.  This option can double
-the size of the tables used by your scanner.
-
-@samp{-Ce} directs @code{flex} to construct @dfn{equivalence classes},
-i.e., sets of characters which have identical
-lexical properties (for example, if the only appearance
-of digits in the @code{flex} input is in the character
-class "[0-9]" then the digits '0', '1', @dots{}, '9'
-will all be put in the same equivalence class).
-Equivalence classes usually give dramatic
-reductions in the final table/object file sizes
-(typically a factor of 2-5) and are pretty cheap
-performance-wise (one array look-up per character
-scanned).
-
-@samp{-Cf} specifies that the @emph{full} scanner tables should
-be generated - @code{flex} should not compress the tables
-by taking advantages of similar transition
-functions for different states.
-
-@samp{-CF} specifies that the alternate fast scanner
-representation (described above under the @samp{-F} flag)
-should be used.  This option cannot be used with
-@samp{-+}.
-
-@samp{-Cm} directs @code{flex} to construct @dfn{meta-equivalence
-classes}, which are sets of equivalence classes (or
-characters, if equivalence classes are not being
-used) that are commonly used together.
-Meta-equivalence classes are often a big win when using
-compressed tables, but they have a moderate
-performance impact (one or two "if" tests and one array
-look-up per character scanned).
-
-@samp{-Cr} causes the generated scanner to @emph{bypass} use of
-the standard I/O library (stdio) for input.
-Instead of calling @samp{fread()} or @samp{getc()}, the scanner
-will use the @samp{read()} system call, resulting in a
-performance gain which varies from system to
-system, but in general is probably negligible unless
-you are also using @samp{-Cf} or @samp{-CF}.  Using @samp{-Cr} can cause
-strange behavior if, for example, you read from
-@code{yyin} using stdio prior to calling the scanner
-(because the scanner will miss whatever text your
-previous reads left in the stdio input buffer).
-
-@samp{-Cr} has no effect if you define @code{YY_INPUT} (see The
-Generated Scanner above).
-
-A lone @samp{-C} specifies that the scanner tables should
-be compressed but neither equivalence classes nor
-meta-equivalence classes should be used.
-
-The options @samp{-Cf} or @samp{-CF} and @samp{-Cm} do not make sense
-together - there is no opportunity for
-meta-equivalence classes if the table is not being
-compressed.  Otherwise the options may be freely
-mixed, and are cumulative.
-
-The default setting is @samp{-Cem}, which specifies that
-@code{flex} should generate equivalence classes and
-meta-equivalence classes.  This setting provides the
-highest degree of table compression.  You can trade
-off faster-executing scanners at the cost of larger
-tables with the following generally being true:
-
-@example
-slowest & smallest
-      -Cem
-      -Cm
-      -Ce
-      -C
-      -C@{f,F@}e
-      -C@{f,F@}
-      -C@{f,F@}a
-fastest & largest
-@end example
-
-Note that scanners with the smallest tables are
-usually generated and compiled the quickest, so
-during development you will usually want to use the
-default, maximal compression.
-
-@samp{-Cfe} is often a good compromise between speed and
-size for production scanners.
-
-@item -ooutput
-directs flex to write the scanner to the file @samp{out-}
-@code{put} instead of @file{lex.yy.c}.  If you combine @samp{-o} with
-the @samp{-t} option, then the scanner is written to
-@code{stdout} but its @samp{#line} directives (see the @samp{-L} option
-above) refer to the file @code{output}.
-
-@item -Pprefix
-changes the default @samp{yy} prefix used by @code{flex} for all
-globally-visible variable and function names to
-instead be @var{prefix}.  For example, @samp{-Pfoo} changes the
-name of @code{yytext} to @file{footext}.  It also changes the
-name of the default output file from @file{lex.yy.c} to
-@file{lex.foo.c}.  Here are all of the names affected:
-
-@example
-yy_create_buffer
-yy_delete_buffer
-yy_flex_debug
-yy_init_buffer
-yy_flush_buffer
-yy_load_buffer_state
-yy_switch_to_buffer
-yyin
-yyleng
-yylex
-yylineno
-yyout
-yyrestart
-yytext
-yywrap
-@end example
-
-(If you are using a C++ scanner, then only @code{yywrap}
-and @code{yyFlexLexer} are affected.) Within your scanner
-itself, you can still refer to the global variables
-and functions using either version of their name;
-but externally, they have the modified name.
-
-This option lets you easily link together multiple
-@code{flex} programs into the same executable.  Note,
-though, that using this option also renames
-@samp{yywrap()}, so you now @emph{must} either provide your own
-(appropriately-named) version of the routine for
-your scanner, or use @samp{%option noyywrap}, as linking
-with @samp{-lfl} no longer provides one for you by
-default.
-
-@item -Sskeleton_file
-overrides the default skeleton file from which @code{flex}
-constructs its scanners.  You'll never need this
-option unless you are doing @code{flex} maintenance or
-development.
-@end table
-
-@code{flex} also provides a mechanism for controlling options
-within the scanner specification itself, rather than from
-the flex command-line.  This is done by including @samp{%option}
-directives in the first section of the scanner
-specification.  You can specify multiple options with a single
-@samp{%option} directive, and multiple directives in the first
-section of your flex input file.  Most options are given
-simply as names, optionally preceded by the word "no"
-(with no intervening whitespace) to negate their meaning.
-A number are equivalent to flex flags or their negation:
-
-@example
-7bit            -7 option
-8bit            -8 option
-align           -Ca option
-backup          -b option
-batch           -B option
-c++             -+ option
-
-caseful or
-case-sensitive  opposite of -i (default)
-
-case-insensitive or
-caseless        -i option
-
-debug           -d option
-default         opposite of -s option
-ecs             -Ce option
-fast            -F option
-full            -f option
-interactive     -I option
-lex-compat      -l option
-meta-ecs        -Cm option
-perf-report     -p option
-read            -Cr option
-stdout          -t option
-verbose         -v option
-warn            opposite of -w option
-                (use "%option nowarn" for -w)
-
-array           equivalent to "%array"
-pointer         equivalent to "%pointer" (default)
-@end example
-
-Some @samp{%option's} provide features otherwise not available:
-
-@table @samp
-@item always-interactive
-instructs flex to generate a scanner which always
-considers its input "interactive".  Normally, on
-each new input file the scanner calls @samp{isatty()} in
-an attempt to determine whether the scanner's input
-source is interactive and thus should be read a
-character at a time.  When this option is used,
-however, then no such call is made.
-
-@item main
-directs flex to provide a default @samp{main()} program
-for the scanner, which simply calls @samp{yylex()}.  This
-option implies @code{noyywrap} (see below).
-
-@item never-interactive
-instructs flex to generate a scanner which never
-considers its input "interactive" (again, no call
-made to @samp{isatty())}.  This is the opposite of @samp{always-}
-@emph{interactive}.
-
-@item stack
-enables the use of start condition stacks (see
-Start Conditions above).
-
-@item stdinit
-if unset (i.e., @samp{%option nostdinit}) initializes @code{yyin}
-and @code{yyout} to nil @code{FILE} pointers, instead of @code{stdin}
-and @code{stdout}.
-
-@item yylineno
-directs @code{flex} to generate a scanner that maintains the number
-of the current line read from its input in the global variable
-@code{yylineno}.  This option is implied by @samp{%option lex-compat}.
-
-@item yywrap
-if unset (i.e., @samp{%option noyywrap}), makes the
-scanner not call @samp{yywrap()} upon an end-of-file, but
-simply assume that there are no more files to scan
-(until the user points @code{yyin} at a new file and calls
-@samp{yylex()} again).
-@end table
-
-@code{flex} scans your rule actions to determine whether you use
-the @code{REJECT} or @samp{yymore()} features.  The @code{reject} and @code{yymore}
-options are available to override its decision as to
-whether you use the options, either by setting them (e.g.,
-@samp{%option reject}) to indicate the feature is indeed used, or
-unsetting them to indicate it actually is not used (e.g.,
-@samp{%option noyymore}).
-
-Three options take string-delimited values, offset with '=':
-
-@example
-%option outfile="ABC"
-@end example
-
-@noindent
-is equivalent to @samp{-oABC}, and
-
-@example
-%option prefix="XYZ"
-@end example
-
-@noindent
-is equivalent to @samp{-PXYZ}.
-
-Finally,
-
-@example
-%option yyclass="foo"
-@end example
-
-@noindent
-only applies when generating a C++ scanner (@samp{-+} option).  It
-informs @code{flex} that you have derived @samp{foo} as a subclass of
-@code{yyFlexLexer} so @code{flex} will place your actions in the member
-function @samp{foo::yylex()} instead of @samp{yyFlexLexer::yylex()}.
-It also generates a @samp{yyFlexLexer::yylex()} member function that
-emits a run-time error (by invoking @samp{yyFlexLexer::LexerError()})
-if called.  See Generating C++ Scanners, below, for additional
-information.
-
-A number of options are available for lint purists who
-want to suppress the appearance of unneeded routines in
-the generated scanner.  Each of the following, if unset,
-results in the corresponding routine not appearing in the
-generated scanner:
-
-@example
-input, unput
-yy_push_state, yy_pop_state, yy_top_state
-yy_scan_buffer, yy_scan_bytes, yy_scan_string
-@end example
-
-@noindent
-(though @samp{yy_push_state()} and friends won't appear anyway
-unless you use @samp{%option stack}).
-
-@node Performance, C++, Options, Top
-@section Performance considerations
-
-The main design goal of @code{flex} is that it generate
-high-performance scanners.  It has been optimized for dealing
-well with large sets of rules.  Aside from the effects on
-scanner speed of the table compression @samp{-C} options outlined
-above, there are a number of options/actions which degrade
-performance.  These are, from most expensive to least:
-
-@example
-REJECT
-%option yylineno
-arbitrary trailing context
-
-pattern sets that require backing up
-%array
-%option interactive
-%option always-interactive
-
-'^' beginning-of-line operator
-yymore()
-@end example
-
-with the first three all being quite expensive and the
-last two being quite cheap.  Note also that @samp{unput()} is
-implemented as a routine call that potentially does quite
-a bit of work, while @samp{yyless()} is a quite-cheap macro; so
-if just putting back some excess text you scanned, use
-@samp{yyless()}.
-
-@code{REJECT} should be avoided at all costs when performance is
-important.  It is a particularly expensive option.
-
-Getting rid of backing up is messy and often may be an
-enormous amount of work for a complicated scanner.  In
-principal, one begins by using the @samp{-b} flag to generate a
-@file{lex.backup} file.  For example, on the input
-
-@example
-%%
-foo        return TOK_KEYWORD;
-foobar     return TOK_KEYWORD;
-@end example
-
-@noindent
-the file looks like:
-
-@example
-State #6 is non-accepting -
- associated rule line numbers:
-       2       3
- out-transitions: [ o ]
- jam-transitions: EOF [ \001-n  p-\177 ]
-
-State #8 is non-accepting -
- associated rule line numbers:
-       3
- out-transitions: [ a ]
- jam-transitions: EOF [ \001-`  b-\177 ]
-
-State #9 is non-accepting -
- associated rule line numbers:
-       3
- out-transitions: [ r ]
- jam-transitions: EOF [ \001-q  s-\177 ]
-
-Compressed tables always back up.
-@end example
-
-The first few lines tell us that there's a scanner state
-in which it can make a transition on an 'o' but not on any
-other character, and that in that state the currently
-scanned text does not match any rule.  The state occurs
-when trying to match the rules found at lines 2 and 3 in
-the input file.  If the scanner is in that state and then
-reads something other than an 'o', it will have to back up
-to find a rule which is matched.  With a bit of
-head-scratching one can see that this must be the state it's in
-when it has seen "fo".  When this has happened, if
-anything other than another 'o' is seen, the scanner will
-have to back up to simply match the 'f' (by the default
-rule).
-
-The comment regarding State #8 indicates there's a problem
-when "foob" has been scanned.  Indeed, on any character
-other than an 'a', the scanner will have to back up to
-accept "foo".  Similarly, the comment for State #9
-concerns when "fooba" has been scanned and an 'r' does not
-follow.
-
-The final comment reminds us that there's no point going
-to all the trouble of removing backing up from the rules
-unless we're using @samp{-Cf} or @samp{-CF}, since there's no
-performance gain doing so with compressed scanners.
-
-The way to remove the backing up is to add "error" rules:
-
-@example
-%%
-foo         return TOK_KEYWORD;
-foobar      return TOK_KEYWORD;
-
-fooba       |
-foob        |
-fo          @{
-            /* false alarm, not really a keyword */
-            return TOK_ID;
-            @}
-@end example
-
-Eliminating backing up among a list of keywords can also
-be done using a "catch-all" rule:
-
-@example
-%%
-foo         return TOK_KEYWORD;
-foobar      return TOK_KEYWORD;
-
-[a-z]+      return TOK_ID;
-@end example
-
-This is usually the best solution when appropriate.
-
-Backing up messages tend to cascade.  With a complicated
-set of rules it's not uncommon to get hundreds of
-messages.  If one can decipher them, though, it often only
-takes a dozen or so rules to eliminate the backing up
-(though it's easy to make a mistake and have an error rule
-accidentally match a valid token.  A possible future @code{flex}
-feature will be to automatically add rules to eliminate
-backing up).
-
-It's important to keep in mind that you gain the benefits
-of eliminating backing up only if you eliminate @emph{every}
-instance of backing up.  Leaving just one means you gain
-nothing.
-
-@var{Variable} trailing context (where both the leading and
-trailing parts do not have a fixed length) entails almost
-the same performance loss as @code{REJECT} (i.e., substantial).
-So when possible a rule like:
-
-@example
-%%
-mouse|rat/(cat|dog)   run();
-@end example
-
-@noindent
-is better written:
-
-@example
-%%
-mouse/cat|dog         run();
-rat/cat|dog           run();
-@end example
-
-@noindent
-or as
-
-@example
-%%
-mouse|rat/cat         run();
-mouse|rat/dog         run();
-@end example
-
-Note that here the special '|' action does @emph{not} provide any
-savings, and can even make things worse (see Deficiencies
-/ Bugs below).
-
-Another area where the user can increase a scanner's
-performance (and one that's easier to implement) arises from
-the fact that the longer the tokens matched, the faster
-the scanner will run.  This is because with long tokens
-the processing of most input characters takes place in the
-(short) inner scanning loop, and does not often have to go
-through the additional work of setting up the scanning
-environment (e.g., @code{yytext}) for the action.  Recall the
-scanner for C comments:
-
-@example
-%x comment
-%%
-        int line_num = 1;
-
-"/*"         BEGIN(comment);
-
-<comment>[^*\n]*
-<comment>"*"+[^*/\n]*
-<comment>\n             ++line_num;
-<comment>"*"+"/"        BEGIN(INITIAL);
-@end example
-
-This could be sped up by writing it as:
-
-@example
-%x comment
-%%
-        int line_num = 1;
-
-"/*"         BEGIN(comment);
-
-<comment>[^*\n]*
-<comment>[^*\n]*\n      ++line_num;
-<comment>"*"+[^*/\n]*
-<comment>"*"+[^*/\n]*\n ++line_num;
-<comment>"*"+"/"        BEGIN(INITIAL);
-@end example
-
-Now instead of each newline requiring the processing of
-another action, recognizing the newlines is "distributed"
-over the other rules to keep the matched text as long as
-possible.  Note that @emph{adding} rules does @emph{not} slow down the
-scanner!  The speed of the scanner is independent of the
-number of rules or (modulo the considerations given at the
-beginning of this section) how complicated the rules are
-with regard to operators such as '*' and '|'.
-
-A final example in speeding up a scanner: suppose you want
-to scan through a file containing identifiers and
-keywords, one per line and with no other extraneous
-characters, and recognize all the keywords.  A natural first
-approach is:
-
-@example
-%%
-asm      |
-auto     |
-break    |
-@dots{} etc @dots{}
-volatile |
-while    /* it's a keyword */
-
-.|\n     /* it's not a keyword */
-@end example
-
-To eliminate the back-tracking, introduce a catch-all
-rule:
-
-@example
-%%
-asm      |
-auto     |
-break    |
-... etc ...
-volatile |
-while    /* it's a keyword */
-
-[a-z]+   |
-.|\n     /* it's not a keyword */
-@end example
-
-Now, if it's guaranteed that there's exactly one word per
-line, then we can reduce the total number of matches by a
-half by merging in the recognition of newlines with that
-of the other tokens:
-
-@example
-%%
-asm\n    |
-auto\n   |
-break\n  |
-@dots{} etc @dots{}
-volatile\n |
-while\n  /* it's a keyword */
-
-[a-z]+\n |
-.|\n     /* it's not a keyword */
-@end example
-
-One has to be careful here, as we have now reintroduced
-backing up into the scanner.  In particular, while @emph{we} know
-that there will never be any characters in the input
-stream other than letters or newlines, @code{flex} can't figure
-this out, and it will plan for possibly needing to back up
-when it has scanned a token like "auto" and then the next
-character is something other than a newline or a letter.
-Previously it would then just match the "auto" rule and be
-done, but now it has no "auto" rule, only a "auto\n" rule.
-To eliminate the possibility of backing up, we could
-either duplicate all rules but without final newlines, or,
-since we never expect to encounter such an input and
-therefore don't how it's classified, we can introduce one
-more catch-all rule, this one which doesn't include a
-newline:
-
-@example
-%%
-asm\n    |
-auto\n   |
-break\n  |
-@dots{} etc @dots{}
-volatile\n |
-while\n  /* it's a keyword */
-
-[a-z]+\n |
-[a-z]+   |
-.|\n     /* it's not a keyword */
-@end example
-
-Compiled with @samp{-Cf}, this is about as fast as one can get a
-@code{flex} scanner to go for this particular problem.
-
-A final note: @code{flex} is slow when matching NUL's,
-particularly when a token contains multiple NUL's.  It's best to
-write rules which match @emph{short} amounts of text if it's
-anticipated that the text will often include NUL's.
-
-Another final note regarding performance: as mentioned
-above in the section How the Input is Matched, dynamically
-resizing @code{yytext} to accommodate huge tokens is a slow
-process because it presently requires that the (huge) token
-be rescanned from the beginning.  Thus if performance is
-vital, you should attempt to match "large" quantities of
-text but not "huge" quantities, where the cutoff between
-the two is at about 8K characters/token.
-
-@node C++, Incompatibilities, Performance, Top
-@section Generating C++ scanners
-
-@code{flex} provides two different ways to generate scanners for
-use with C++.  The first way is to simply compile a
-scanner generated by @code{flex} using a C++ compiler instead of a C
-compiler.  You should not encounter any compilations
-errors (please report any you find to the email address
-given in the Author section below).  You can then use C++
-code in your rule actions instead of C code.  Note that
-the default input source for your scanner remains @code{yyin},
-and default echoing is still done to @code{yyout}.  Both of these
-remain @samp{FILE *} variables and not C++ @code{streams}.
-
-You can also use @code{flex} to generate a C++ scanner class, using
-the @samp{-+} option, (or, equivalently, @samp{%option c++}), which
-is automatically specified if the name of the flex executable ends
-in a @samp{+}, such as @code{flex++}.  When using this option, flex
-defaults to generating the scanner to the file @file{lex.yy.cc} instead
-of @file{lex.yy.c}.  The generated scanner includes the header file
-@file{FlexLexer.h}, which defines the interface to two C++ classes.
-
-The first class, @code{FlexLexer}, provides an abstract base
-class defining the general scanner class interface.  It
-provides the following member functions:
-
-@table @samp
-@item const char* YYText()
-returns the text of the most recently matched
-token, the equivalent of @code{yytext}.
-
-@item int YYLeng()
-returns the length of the most recently matched
-token, the equivalent of @code{yyleng}.
-
-@item int lineno() const
-returns the current input line number (see @samp{%option yylineno}),
-or 1 if @samp{%option yylineno} was not used.
-
-@item void set_debug( int flag )
-sets the debugging flag for the scanner, equivalent to assigning to
-@code{yy_flex_debug} (see the Options section above).  Note that you
-must build the scanner using @samp{%option debug} to include debugging
-information in it.
-
-@item int debug() const
-returns the current setting of the debugging flag.
-@end table
-
-Also provided are member functions equivalent to
-@samp{yy_switch_to_buffer(), yy_create_buffer()} (though the
-first argument is an @samp{istream*} object pointer and not a
-@samp{FILE*}, @samp{yy_flush_buffer()}, @samp{yy_delete_buffer()},
-and @samp{yyrestart()} (again, the first argument is a @samp{istream*}
-object pointer).
-
-The second class defined in @file{FlexLexer.h} is @code{yyFlexLexer},
-which is derived from @code{FlexLexer}.  It defines the following
-additional member functions:
-
-@table @samp
-@item yyFlexLexer( istream* arg_yyin = 0, ostream* arg_yyout = 0 )
-constructs a @code{yyFlexLexer} object using the given
-streams for input and output.  If not specified,
-the streams default to @code{cin} and @code{cout}, respectively.
-
-@item virtual int yylex()
-performs the same role is @samp{yylex()} does for ordinary
-flex scanners: it scans the input stream, consuming
-tokens, until a rule's action returns a value.  If you derive a subclass
-@var{S}
-from @code{yyFlexLexer}
-and want to access the member functions and variables of
-@var{S}
-inside @samp{yylex()},
-then you need to use @samp{%option yyclass="@var{S}"}
-to inform @code{flex}
-that you will be using that subclass instead of @code{yyFlexLexer}.
-In this case, rather than generating @samp{yyFlexLexer::yylex()},
-@code{flex} generates @samp{@var{S}::yylex()}
-(and also generates a dummy @samp{yyFlexLexer::yylex()}
-that calls @samp{yyFlexLexer::LexerError()}
-if called).
-
-@item virtual void switch_streams(istream* new_in = 0, ostream* new_out = 0)
-reassigns @code{yyin} to @code{new_in}
-(if non-nil)
-and @code{yyout} to @code{new_out}
-(ditto), deleting the previous input buffer if @code{yyin}
-is reassigned.
-
-@item int yylex( istream* new_in = 0, ostream* new_out = 0 )
-first switches the input streams via @samp{switch_streams( new_in, new_out )}
-and then returns the value of @samp{yylex()}.
-@end table
-
-In addition, @code{yyFlexLexer} defines the following protected
-virtual functions which you can redefine in derived
-classes to tailor the scanner:
-
-@table @samp
-@item virtual int LexerInput( char* buf, int max_size )
-reads up to @samp{max_size} characters into @var{buf} and
-returns the number of characters read.  To indicate
-end-of-input, return 0 characters.  Note that
-"interactive" scanners (see the @samp{-B} and @samp{-I} flags)
-define the macro @code{YY_INTERACTIVE}.  If you redefine
-@code{LexerInput()} and need to take different actions
-depending on whether or not the scanner might be
-scanning an interactive input source, you can test
-for the presence of this name via @samp{#ifdef}.
-
-@item virtual void LexerOutput( const char* buf, int size )
-writes out @var{size} characters from the buffer @var{buf},
-which, while NUL-terminated, may also contain
-"internal" NUL's if the scanner's rules can match
-text with NUL's in them.
-
-@item virtual void LexerError( const char* msg )
-reports a fatal error message.  The default version
-of this function writes the message to the stream
-@code{cerr} and exits.
-@end table
-
-Note that a @code{yyFlexLexer} object contains its @emph{entire}
-scanning state.  Thus you can use such objects to create
-reentrant scanners.  You can instantiate multiple instances of
-the same @code{yyFlexLexer} class, and you can also combine
-multiple C++ scanner classes together in the same program
-using the @samp{-P} option discussed above.
-Finally, note that the @samp{%array} feature is not available to
-C++ scanner classes; you must use @samp{%pointer} (the default).
-
-Here is an example of a simple C++ scanner:
-
-@example
-    // An example of using the flex C++ scanner class.
-
-%@{
-int mylineno = 0;
-%@}
-
-string  \"[^\n"]+\"
-
-ws      [ \t]+
-
-alpha   [A-Za-z]
-dig     [0-9]
-name    (@{alpha@}|@{dig@}|\$)(@{alpha@}|@{dig@}|[_.\-/$])*
-num1    [-+]?@{dig@}+\.?([eE][-+]?@{dig@}+)?
-num2    [-+]?@{dig@}*\.@{dig@}+([eE][-+]?@{dig@}+)?
-number  @{num1@}|@{num2@}
-
-%%
-
-@{ws@}    /* skip blanks and tabs */
-
-"/*"    @{
-        int c;
-
-        while((c = yyinput()) != 0)
-            @{
-            if(c == '\n')
-                ++mylineno;
-
-            else if(c == '*')
-                @{
-                if((c = yyinput()) == '/')
-                    break;
-                else
-                    unput(c);
-                @}
-            @}
-        @}
-
-@{number@}  cout << "number " << YYText() << '\n';
-
-\n        mylineno++;
-
-@{name@}    cout << "name " << YYText() << '\n';
-
-@{string@}  cout << "string " << YYText() << '\n';
-
-%%
-
-Version 2.5               December 1994                        44
-
-int main( int /* argc */, char** /* argv */ )
-    @{
-    FlexLexer* lexer = new yyFlexLexer;
-    while(lexer->yylex() != 0)
-        ;
-    return 0;
-    @}
-@end example
-
-If you want to create multiple (different) lexer classes,
-you use the @samp{-P} flag (or the @samp{prefix=} option) to rename each
-@code{yyFlexLexer} to some other @code{xxFlexLexer}.  You then can
-include @samp{<FlexLexer.h>} in your other sources once per lexer
-class, first renaming @code{yyFlexLexer} as follows:
-
-@example
-#undef yyFlexLexer
-#define yyFlexLexer xxFlexLexer
-#include <FlexLexer.h>
-
-#undef yyFlexLexer
-#define yyFlexLexer zzFlexLexer
-#include <FlexLexer.h>
-@end example
-
-if, for example, you used @samp{%option prefix="xx"} for one of
-your scanners and @samp{%option prefix="zz"} for the other.
-
-IMPORTANT: the present form of the scanning class is
-@emph{experimental} and may change considerably between major
-releases.
-
-@node Incompatibilities, Diagnostics, C++, Top
-@section Incompatibilities with @code{lex} and POSIX
-
-@code{flex} is a rewrite of the AT&T Unix @code{lex} tool (the two
-implementations do not share any code, though), with some
-extensions and incompatibilities, both of which are of
-concern to those who wish to write scanners acceptable to
-either implementation.  Flex is fully compliant with the
-POSIX @code{lex} specification, except that when using @samp{%pointer}
-(the default), a call to @samp{unput()} destroys the contents of
-@code{yytext}, which is counter to the POSIX specification.
-
-In this section we discuss all of the known areas of
-incompatibility between flex, AT&T lex, and the POSIX
-specification.
-
-@code{flex's} @samp{-l} option turns on maximum compatibility with the
-original AT&T @code{lex} implementation, at the cost of a major
-loss in the generated scanner's performance.  We note
-below which incompatibilities can be overcome using the @samp{-l}
-option.
-
-@code{flex} is fully compatible with @code{lex} with the following
-exceptions:
-
-@itemize -
-@item
-The undocumented @code{lex} scanner internal variable @code{yylineno}
-is not supported unless @samp{-l} or @samp{%option yylineno} is used.
-@code{yylineno} should be maintained on a per-buffer basis, rather
-than a per-scanner (single global variable) basis.  @code{yylineno} is
-not part of the POSIX specification.
-
-@item
-The @samp{input()} routine is not redefinable, though it
-may be called to read characters following whatever
-has been matched by a rule.  If @samp{input()} encounters
-an end-of-file the normal @samp{yywrap()} processing is
-done.  A ``real'' end-of-file is returned by
-@samp{input()} as @code{EOF}.
-
-Input is instead controlled by defining the
-@code{YY_INPUT} macro.
-
-The @code{flex} restriction that @samp{input()} cannot be
-redefined is in accordance with the POSIX
-specification, which simply does not specify any way of
-controlling the scanner's input other than by making
-an initial assignment to @code{yyin}.
-
-@item
-The @samp{unput()} routine is not redefinable.  This
-restriction is in accordance with POSIX.
-
-@item
-@code{flex} scanners are not as reentrant as @code{lex} scanners.
-In particular, if you have an interactive scanner
-and an interrupt handler which long-jumps out of
-the scanner, and the scanner is subsequently called
-again, you may get the following message:
-
-@example
-fatal flex scanner internal error--end of buffer missed
-@end example
-
-To reenter the scanner, first use
-
-@example
-yyrestart( yyin );
-@end example
-
-Note that this call will throw away any buffered
-input; usually this isn't a problem with an
-interactive scanner.
-
-Also note that flex C++ scanner classes @emph{are}
-reentrant, so if using C++ is an option for you, you
-should use them instead.  See "Generating C++
-Scanners" above for details.
-
-@item
-@samp{output()} is not supported.  Output from the @samp{ECHO}
-macro is done to the file-pointer @code{yyout} (default
-@code{stdout}).
-
-@samp{output()} is not part of the POSIX specification.
-
-@item
-@code{lex} does not support exclusive start conditions
-(%x), though they are in the POSIX specification.
-
-@item
-When definitions are expanded, @code{flex} encloses them
-in parentheses.  With lex, the following:
-
-@example
-NAME    [A-Z][A-Z0-9]*
-%%
-foo@{NAME@}?      printf( "Found it\n" );
-%%
-@end example
-
-will not match the string "foo" because when the
-macro is expanded the rule is equivalent to
-"foo[A-Z][A-Z0-9]*?" and the precedence is such that the
-'?' is associated with "[A-Z0-9]*".  With @code{flex}, the
-rule will be expanded to "foo([A-Z][A-Z0-9]*)?" and
-so the string "foo" will match.
-
-Note that if the definition begins with @samp{^} or ends
-with @samp{$} then it is @emph{not} expanded with parentheses, to
-allow these operators to appear in definitions
-without losing their special meanings.  But the
-@samp{<s>, /}, and @samp{<<EOF>>} operators cannot be used in a
-@code{flex} definition.
-
-Using @samp{-l} results in the @code{lex} behavior of no
-parentheses around the definition.
-
-The POSIX specification is that the definition be enclosed in
-parentheses.
-
-@item
-Some implementations of @code{lex} allow a rule's action to begin on
-a separate line, if the rule's pattern has trailing whitespace:
-
-@example
-%%
-foo|bar<space here>
-  @{ foobar_action(); @}
-@end example
-
-@code{flex} does not support this feature.
-
-@item
-The @code{lex} @samp{%r} (generate a Ratfor scanner) option is
-not supported.  It is not part of the POSIX
-specification.
-
-@item
-After a call to @samp{unput()}, @code{yytext} is undefined until
-the next token is matched, unless the scanner was
-built using @samp{%array}.  This is not the case with @code{lex}
-or the POSIX specification.  The @samp{-l} option does
-away with this incompatibility.
-
-@item
-The precedence of the @samp{@{@}} (numeric range) operator
-is different.  @code{lex} interprets "abc@{1,3@}" as "match
-one, two, or three occurrences of 'abc'", whereas
-@code{flex} interprets it as "match 'ab' followed by one,
-two, or three occurrences of 'c'".  The latter is
-in agreement with the POSIX specification.
-
-@item
-The precedence of the @samp{^} operator is different.  @code{lex}
-interprets "^foo|bar" as "match either 'foo' at the
-beginning of a line, or 'bar' anywhere", whereas
-@code{flex} interprets it as "match either 'foo' or 'bar'
-if they come at the beginning of a line".  The
-latter is in agreement with the POSIX specification.
-
-@item
-The special table-size declarations such as @samp{%a}
-supported by @code{lex} are not required by @code{flex} scanners;
-@code{flex} ignores them.
-
-@item
-The name FLEX_SCANNER is #define'd so scanners may
-be written for use with either @code{flex} or @code{lex}.
-Scanners also include @code{YY_FLEX_MAJOR_VERSION} and
-@code{YY_FLEX_MINOR_VERSION} indicating which version of
-@code{flex} generated the scanner (for example, for the
-2.5 release, these defines would be 2 and 5
-respectively).
-@end itemize
-
-The following @code{flex} features are not included in @code{lex} or the
-POSIX specification:
-
-@example
-C++ scanners
-%option
-start condition scopes
-start condition stacks
-interactive/non-interactive scanners
-yy_scan_string() and friends
-yyterminate()
-yy_set_interactive()
-yy_set_bol()
-YY_AT_BOL()
-<<EOF>>
-<*>
-YY_DECL
-YY_START
-YY_USER_ACTION
-YY_USER_INIT
-#line directives
-%@{@}'s around actions
-multiple actions on a line
-@end example
-
-@noindent
-plus almost all of the flex flags.  The last feature in
-the list refers to the fact that with @code{flex} you can put
-multiple actions on the same line, separated with
-semicolons, while with @code{lex}, the following
-
-@example
-foo    handle_foo(); ++num_foos_seen;
-@end example
-
-@noindent
-is (rather surprisingly) truncated to
-
-@example
-foo    handle_foo();
-@end example
-
-@code{flex} does not truncate the action.  Actions that are not
-enclosed in braces are simply terminated at the end of the
-line.
-
-@node Diagnostics, Files, Incompatibilities, Top
-@section Diagnostics
-
-@table @samp
-@item warning, rule cannot be matched
-indicates that the given
-rule cannot be matched because it follows other rules that
-will always match the same text as it.  For example, in
-the following "foo" cannot be matched because it comes
-after an identifier "catch-all" rule:
-
-@example
-[a-z]+    got_identifier();
-foo       got_foo();
-@end example
-
-Using @code{REJECT} in a scanner suppresses this warning.
-
-@item warning, -s option given but default rule can be matched
-means that it is possible (perhaps only in a particular
-start condition) that the default rule (match any single
-character) is the only one that will match a particular
-input.  Since @samp{-s} was given, presumably this is not
-intended.
-
-@item reject_used_but_not_detected undefined
-@itemx yymore_used_but_not_detected undefined
-These errors can
-occur at compile time.  They indicate that the scanner
-uses @code{REJECT} or @samp{yymore()} but that @code{flex} failed to notice the
-fact, meaning that @code{flex} scanned the first two sections
-looking for occurrences of these actions and failed to
-find any, but somehow you snuck some in (via a #include
-file, for example).  Use @samp{%option reject} or @samp{%option yymore}
-to indicate to flex that you really do use these features.
-
-@item flex scanner jammed
-a scanner compiled with @samp{-s} has
-encountered an input string which wasn't matched by any of
-its rules.  This error can also occur due to internal
-problems.
-
-@item token too large, exceeds YYLMAX
-your scanner uses @samp{%array}
-and one of its rules matched a string longer than the @samp{YYL-}
-@code{MAX} constant (8K bytes by default).  You can increase the
-value by #define'ing @code{YYLMAX} in the definitions section of
-your @code{flex} input.
-
-@item scanner requires -8 flag to use the character '@var{x}'
-Your
-scanner specification includes recognizing the 8-bit
-character @var{x} and you did not specify the -8 flag, and your
-scanner defaulted to 7-bit because you used the @samp{-Cf} or @samp{-CF}
-table compression options.  See the discussion of the @samp{-7}
-flag for details.
-
-@item flex scanner push-back overflow
-you used @samp{unput()} to push
-back so much text that the scanner's buffer could not hold
-both the pushed-back text and the current token in @code{yytext}.
-Ideally the scanner should dynamically resize the buffer
-in this case, but at present it does not.
-
-@item input buffer overflow, can't enlarge buffer because scanner uses REJECT
-the scanner was working on matching an
-extremely large token and needed to expand the input
-buffer.  This doesn't work with scanners that use @code{REJECT}.
-
-@item fatal flex scanner internal error--end of buffer missed
-This can occur in an scanner which is reentered after a
-long-jump has jumped out (or over) the scanner's
-activation frame.  Before reentering the scanner, use:
-
-@example
-yyrestart( yyin );
-@end example
-
-@noindent
-or, as noted above, switch to using the C++ scanner class.
-
-@item too many start conditions in <> construct!
-you listed
-more start conditions in a <> construct than exist (so you
-must have listed at least one of them twice).
-@end table
-
-@node Files, Deficiencies, Diagnostics, Top
-@section Files
-
-@table @file
-@item -lfl
-library with which scanners must be linked.
-
-@item lex.yy.c
-generated scanner (called @file{lexyy.c} on some systems).
-
-@item lex.yy.cc
-generated C++ scanner class, when using @samp{-+}.
-
-@item <FlexLexer.h>
-header file defining the C++ scanner base class,
-@code{FlexLexer}, and its derived class, @code{yyFlexLexer}.
-
-@item flex.skl
-skeleton scanner.  This file is only used when
-building flex, not when flex executes.
-
-@item lex.backup
-backing-up information for @samp{-b} flag (called @file{lex.bck}
-on some systems).
-@end table
-
-@node Deficiencies, See also, Files, Top
-@section Deficiencies / Bugs
-
-Some trailing context patterns cannot be properly matched
-and generate warning messages ("dangerous trailing
-context").  These are patterns where the ending of the first
-part of the rule matches the beginning of the second part,
-such as "zx*/xy*", where the 'x*' matches the 'x' at the
-beginning of the trailing context.  (Note that the POSIX
-draft states that the text matched by such patterns is
-undefined.)
-
-For some trailing context rules, parts which are actually
-fixed-length are not recognized as such, leading to the
-abovementioned performance loss.  In particular, parts
-using '|' or @{n@} (such as "foo@{3@}") are always considered
-variable-length.
-
-Combining trailing context with the special '|' action can
-result in @emph{fixed} trailing context being turned into the
-more expensive @var{variable} trailing context.  For example, in
-the following:
-
-@example
-%%
-abc      |
-xyz/def
-@end example
-
-Use of @samp{unput()} invalidates yytext and yyleng, unless the
-@samp{%array} directive or the @samp{-l} option has been used.
-
-Pattern-matching of NUL's is substantially slower than
-matching other characters.
-
-Dynamic resizing of the input buffer is slow, as it
-entails rescanning all the text matched so far by the
-current (generally huge) token.
-
-Due to both buffering of input and read-ahead, you cannot
-intermix calls to <stdio.h> routines, such as, for
-example, @samp{getchar()}, with @code{flex} rules and expect it to work.
-Call @samp{input()} instead.
-
-The total table entries listed by the @samp{-v} flag excludes the
-number of table entries needed to determine what rule has
-been matched.  The number of entries is equal to the
-number of DFA states if the scanner does not use @code{REJECT}, and
-somewhat greater than the number of states if it does.
-
-@code{REJECT} cannot be used with the @samp{-f} or @samp{-F} options.
-
-The @code{flex} internal algorithms need documentation.
-
-@node See also, Author, Deficiencies, Top
-@section See also
-
-@code{lex}(1), @code{yacc}(1), @code{sed}(1), @code{awk}(1).
-
-John Levine, Tony Mason, and Doug Brown: Lex & Yacc;
-O'Reilly and Associates.  Be sure to get the 2nd edition.
-
-M. E. Lesk and E. Schmidt, LEX - Lexical Analyzer Generator.
-
-Alfred Aho, Ravi Sethi and Jeffrey Ullman: Compilers:
-Principles, Techniques and Tools; Addison-Wesley (1986).
-Describes the pattern-matching techniques used by @code{flex}
-(deterministic finite automata).
-
-@node Author,  , See also, Top
-@section Author
-
-Vern Paxson, with the help of many ideas and much inspiration from
-Van Jacobson.  Original version by Jef Poskanzer.  The fast table
-representation is a partial implementation of a design done by Van
-Jacobson.  The implementation was done by Kevin Gong and Vern Paxson.
-
-Thanks to the many @code{flex} beta-testers, feedbackers, and
-contributors, especially Francois Pinard, Casey Leedom, Stan
-Adermann, Terry Allen, David Barker-Plummer, John Basrai, Nelson
-H.F. Beebe, @samp{benson@@odi.com}, Karl Berry, Peter A. Bigot,
-Simon Blanchard, Keith Bostic, Frederic Brehm, Ian Brockbank, Kin
-Cho, Nick Christopher, Brian Clapper, J.T. Conklin, Jason Coughlin,
-Bill Cox, Nick Cropper, Dave Curtis, Scott David Daniels, Chris
-G. Demetriou, Theo Deraadt, Mike Donahue, Chuck Doucette, Tom Epperly,
-Leo Eskin, Chris Faylor, Chris Flatters, Jon Forrest, Joe Gayda, Kaveh
-R. Ghazi, Eric Goldman, Christopher M.  Gould, Ulrich Grepel, Peer
-Griebel, Jan Hajic, Charles Hemphill, NORO Hideo, Jarkko Hietaniemi,
-Scott Hofmann, Jeff Honig, Dana Hudes, Eric Hughes, John Interrante,
-Ceriel Jacobs, Michal Jaegermann, Sakari Jalovaara, Jeffrey R. Jones,
-Henry Juengst, Klaus Kaempf, Jonathan I. Kamens, Terrence O Kane,
-Amir Katz, @samp{ken@@ken.hilco.com}, Kevin B. Kenny, Steve Kirsch,
-Winfried Koenig, Marq Kole, Ronald Lamprecht, Greg Lee, Rohan Lenard,
-Craig Leres, John Levine, Steve Liddle, Mike Long, Mohamed el Lozy,
-Brian Madsen, Malte, Joe Marshall, Bengt Martensson, Chris Metcalf,
-Luke Mewburn, Jim Meyering, R.  Alexander Milowski, Erik Naggum,
-G.T. Nicol, Landon Noll, James Nordby, Marc Nozell, Richard Ohnemus,
-Karsten Pahnke, Sven Panne, Roland Pesch, Walter Pelissero, Gaumond
-Pierre, Esmond Pitt, Jef Poskanzer, Joe Rahmeh, Jarmo Raiha, Frederic
-Raimbault, Pat Rankin, Rick Richardson, Kevin Rodgers, Kai Uwe Rommel,
-Jim Roskind, Alberto Santini, Andreas Scherer, Darrell Schiebel, Raf
-Schietekat, Doug Schmidt, Philippe Schnoebelen, Andreas Schwab, Alex
-Siegel, Eckehard Stolz, Jan-Erik Strvmquist, Mike Stump, Paul Stuart,
-Dave Tallman, Ian Lance Taylor, Chris Thewalt, Richard M. Timoney,
-Jodi Tsai, Paul Tuinenga, Gary Weik, Frank Whaley, Gerhard Wilhelms,
-Kent Williams, Ken Yap, Ron Zellar, Nathan Zelle, David Zuhn, and
-those whose names have slipped my marginal mail-archiving skills but
-whose contributions are appreciated all the same.
-
-Thanks to Keith Bostic, Jon Forrest, Noah Friedman, John Gilmore,
-Craig Leres, John Levine, Bob Mulcahy, G.T.  Nicol, Francois Pinard,
-Rich Salz, and Richard Stallman for help with various distribution
-headaches.
-
-Thanks to Esmond Pitt and Earle Horton for 8-bit character support;
-to Benson Margulies and Fred Burke for C++ support; to Kent Williams
-and Tom Epperly for C++ class support; to Ove Ewerlid for support of
-NUL's; and to Eric Hughes for support of multiple buffers.
-
-This work was primarily done when I was with the Real Time Systems
-Group at the Lawrence Berkeley Laboratory in Berkeley, CA.  Many thanks
-to all there for the support I received.
-
-Send comments to @samp{vern@@ee.lbl.gov}.
-
-@c @node Index,  , Top, Top
-@c @unnumbered Index
-@c
-@c @printindex cp
-
-@contents
-@bye
-
-@c Local variables:
-@c texinfo-column-for-description: 32
-@c End: