diff options
Diffstat (limited to 'media/libstagefright/codecs/amrnb/enc/src/prm2bits.cpp')
-rw-r--r-- | media/libstagefright/codecs/amrnb/enc/src/prm2bits.cpp | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/media/libstagefright/codecs/amrnb/enc/src/prm2bits.cpp b/media/libstagefright/codecs/amrnb/enc/src/prm2bits.cpp new file mode 100644 index 0000000..9088f7d --- /dev/null +++ b/media/libstagefright/codecs/amrnb/enc/src/prm2bits.cpp @@ -0,0 +1,310 @@ +/* ------------------------------------------------------------------ + * Copyright (C) 1998-2009 PacketVideo + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either + * express or implied. + * See the License for the specific language governing permissions + * and limitations under the License. + * ------------------------------------------------------------------- + */ +/**************************************************************************************** +Portions of this file are derived from the following 3GPP standard: + + 3GPP TS 26.073 + ANSI-C code for the Adaptive Multi-Rate (AMR) speech codec + Available from http://www.3gpp.org + +(C) 2004, 3GPP Organizational Partners (ARIB, ATIS, CCSA, ETSI, TTA, TTC) +Permission to distribute, modify and use this file under the standard license +terms listed above has been obtained from the copyright holder. +****************************************************************************************/ +/* + + + + + Filename: /audio/gsm_amr/c/src/prm2bits.c + + Date: 02/04/2002 + +------------------------------------------------------------------------------ + REVISION HISTORY + + Description: Improved the code as per review comments. + + Description: For Int2bin() and Prm2bits() + 1. Eliminated unused include file typedef.h. + 2. Replaced array addressing by pointers + 3. Changed to decrement loops + + Description: Replaced "int" and/or "char" with OSCL defined types. + + Description: + +------------------------------------------------------------------------------ +*/ + +/*---------------------------------------------------------------------------- +; INCLUDES +----------------------------------------------------------------------------*/ +#include "prm2bits.h" +#include "mode.h" +#include "bitno_tab.h" + + +/*---------------------------------------------------------------------------- +; MACROS +; [Define module specific macros here] +----------------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------------- +; DEFINES +; [Include all pre-processor statements here. Include conditional +; compile variables also.] +----------------------------------------------------------------------------*/ +#define MASK 0x0001 +/*---------------------------------------------------------------------------- +; LOCAL FUNCTION DEFINITIONS +; [List function prototypes here] +----------------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------------- +; LOCAL VARIABLE DEFINITIONS +; [Variable declaration - defined here and used outside this module] +----------------------------------------------------------------------------*/ + +/* +------------------------------------------------------------------------------ + FUNCTION NAME: Int2bin +------------------------------------------------------------------------------ + INPUT AND OUTPUT DEFINITIONS + + Inputs: + value = value to be converted to binary of type Word16 + no_of_bits = number of bits associated with value of type Word16 + + Outputs: + bitstream = pointer to address where bits are written of type Word16 + + Returns: + None + + Global Variables Used: + None + + Local Variables Needed: + None + +------------------------------------------------------------------------------ + FUNCTION DESCRIPTION + + FUNCTION: Int2bin + + PURPOSE: convert integer to binary and write the bits to the array + bitstream[]. The most significant bits are written first. + +------------------------------------------------------------------------------ + REQUIREMENTS + + None + +------------------------------------------------------------------------------ + REFERENCES + + prm2bits.c, UMTS GSM AMR speech codec, R99 - Version 3.2.0, March 2, 2001 + +------------------------------------------------------------------------------ + PSEUDO-CODE + +static void Int2bin ( + Word16 value, // input : value to be converted to binary + Word16 no_of_bits, // input : number of bits associated with value + Word16 *bitstream // output: address where bits are written +) +{ + Word16 *pt_bitstream, i, bit; + + pt_bitstream = &bitstream[no_of_bits]; + + for (i = 0; i < no_of_bits; i++) + { + bit = value & MASK; + if (bit == 0) + { + *--pt_bitstream = BIT_0; + } + else + { + *--pt_bitstream = BIT_1; + } + value = shr (value, 1); + } +} + +------------------------------------------------------------------------------ + RESOURCES USED [optional] + + When the code is written for a specific target processor the + the resources used should be documented below. + + HEAP MEMORY USED: x bytes + + STACK MEMORY USED: x bytes + + CLOCK CYCLES: (cycle count equation for this function) + (variable + used to represent cycle count for each subroutine + called) + where: (cycle count variable) = cycle count for [subroutine + name] + +------------------------------------------------------------------------------ + CAUTION [optional] + [State any special notes, constraints or cautions for users of this function] + +------------------------------------------------------------------------------ +*/ + +/*---------------------------------------------------------------------------- +; FUNCTION CODE +----------------------------------------------------------------------------*/ +static void Int2bin( + Word16 value, /* input : value to be converted to binary */ + Word16 no_of_bits, /* input : number of bits associated with value */ + Word16 *bitstream /* output: address where bits are written */ +) +{ + Word16 *pt_bitstream; + Word16 i; + + pt_bitstream = &bitstream[no_of_bits-1]; + + for (i = no_of_bits; i != 0; i--) + { + *(pt_bitstream--) = value & MASK; + value >>= 1; + } + +} + + +/* +------------------------------------------------------------------------------ + FUNCTION NAME: prm2bits +------------------------------------------------------------------------------ + INPUT AND OUTPUT DEFINITIONS + + Inputs: + mode = AMR mode of type enum Mode + prm[] = pointer to analysis parameters of type Word16 + + Outputs: + bits[] = pointer to serial bits of type Word16 + + Returns: + None + + Global Variables Used: + None + + Local Variables Needed: + None + +------------------------------------------------------------------------------ + FUNCTION DESCRIPTION + + FUNCTION: Prm2bits + + PURPOSE: converts the encoder parameter vector into a vector of serial + bits. + + DESCRIPTION: depending on the mode, different numbers of parameters + (with differing numbers of bits) are processed. Details + are found in bitno.tab + +------------------------------------------------------------------------------ + REQUIREMENTS + + None + +------------------------------------------------------------------------------ + REFERENCES + + prm2bits.c, UMTS GSM AMR speech codec, R99 - Version 3.2.0, March 2, 2001 + +------------------------------------------------------------------------------ + PSEUDO-CODE + +void Prm2bits ( + enum Mode mode, // i : AMR mode + Word16 prm[], // i : analysis parameters (size <= MAX_PRM_SIZE) + Word16 bits[] // o : serial bits (size <= MAX_SERIAL_SIZE) +) +{ + Word16 i; + + for (i = 0; i < prmno[mode]; i++) + { + Int2bin (prm[i], bitno[mode][i], bits); + bits += bitno[mode][i]; + add(0,0); // account for above pointer update + } + + return; +} + +------------------------------------------------------------------------------ + RESOURCES USED [optional] + + When the code is written for a specific target processor the + the resources used should be documented below. + + HEAP MEMORY USED: x bytes + + STACK MEMORY USED: x bytes + + CLOCK CYCLES: (cycle count equation for this function) + (variable + used to represent cycle count for each subroutine + called) + where: (cycle count variable) = cycle count for [subroutine + name] + +------------------------------------------------------------------------------ + CAUTION [optional] + [State any special notes, constraints or cautions for users of this function] + +------------------------------------------------------------------------------ +*/ + +/*---------------------------------------------------------------------------- +; FUNCTION CODE +----------------------------------------------------------------------------*/ +void Prm2bits( + enum Mode mode, /* i : AMR mode */ + Word16 prm[], /* i : analysis parameters (size <= MAX_PRM_SIZE) */ + Word16 bits[] /* o : serial bits (size <= MAX_SERIAL_SIZE) */ +) +{ + Word16 i; + const Word16 *p_mode; + Word16 *p_prm; + + p_mode = &bitno[mode][0]; + p_prm = &prm[0]; + + for (i = prmno[mode]; i != 0; i--) + { + Int2bin(*(p_prm++), *(p_mode), bits); + bits += *(p_mode++); + } + + return; +} + |