auto import from //depot/cupcake/@135843

12 files changed, 0 insertions, 1729 deletions

diff --git a/Android.mk b/Android.mk
deleted file mode 100644
index b2e9caf..0000000
--- a/Android.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-# Copyright 2006 The Android Open Source Project
-
-# Setting LOCAL_PATH will mess up all-subdir-makefiles, so do it beforehand.
-SAVE_MAKEFILES := $(call all-subdir-makefiles)
-
-LOCAL_PATH:= $(call my-dir)
-include $(CLEAR_VARS)
-
-LOCAL_SHARED_LIBRARIES := libcutils
-
-LOCAL_INCLUDES += $(LOCAL_PATH)
-
-ifneq ($(TARGET_SIMULATOR),true)
-  LOCAL_CFLAGS  += -DQEMU_HARDWARE
-  QEMU_HARDWARE := true
-endif
-
-ifneq ($(TARGET_SIMULATOR),true)
-LOCAL_SHARED_LIBRARIES += libdl
-endif
-
-include $(SAVE_MAKEFILES)
-
-LOCAL_SRC_FILES += hardware.c
-
-# need "-lrt" on Linux simulator to pick up clock_gettime
-ifeq ($(TARGET_SIMULATOR),true)
-	ifeq ($(HOST_OS),linux)
-		LOCAL_LDLIBS += -lrt -lpthread -ldl
-	endif
-endif
-
-LOCAL_MODULE:= libhardware
-
-include $(BUILD_SHARED_LIBRARY)
diff --git a/MODULE_LICENSE_APACHE2 b/MODULE_LICENSE_APACHE2
deleted file mode 100644
index e69de29..0000000
--- a/MODULE_LICENSE_APACHE2
+++ /dev/null
diff --git a/NOTICE b/NOTICE
deleted file mode 100644
index c5b1efa..0000000
--- a/NOTICE
+++ /dev/null
@@ -1,190 +0,0 @@
-
-   Copyright (c) 2005-2008, The Android Open Source Project
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.
-
-
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
diff --git a/hardware.c b/hardware.c
deleted file mode 100644
index 86bce24..0000000
--- a/hardware.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <hardware/hardware.h>
-
-#include <cutils/properties.h>
-
-#include <dlfcn.h>
-#include <string.h>
-#include <pthread.h>
-#include <errno.h>
-#include <limits.h>
-
-#define LOG_TAG "HAL"
-#include <utils/Log.h>
-
-/** Base path of the hal modules */
-#define HAL_LIBRARY_PATH "/system/lib/hw"
-
-/**
- * There are a set of variant filename for modules. The form of the filename
- * is "<MODULE_ID>.variant.so" so for the led module the Dream variants 
- * of base "ro.product.board", "ro.board.platform" and "ro.arch" would be:
- *
- * led.trout.so
- * led.msm7k.so
- * led.ARMV6.so
- * led.default.so
- */
-
-#define HAL_DEFAULT_VARIANT     "default"
-#define HAL_VARIANT_KEYS_COUNT  4
-static const char *variant_keys[HAL_VARIANT_KEYS_COUNT] = {
-    "ro.product.board",
-    "ro.board.platform",
-    "ro.arch",
-    HAL_DEFAULT_VARIANT
-};
-
-/**
- * Load the file defined by the path and if succesfull
- * return the dlopen handle and the hmi.
- * @return 0 = success, !0 = failure.
- */
-static int load(const char *id,
-                const char *path,
-                void **pHandle,
-                const struct hw_module_t **pHmi)
-{
-    int status;
-    void *handle;
-    const struct hw_module_t *hmi;
-
-    LOGV("load: E id=%s path=%s", id, path);
-
-    /*
-     * load the symbols resolving undefined symbols before
-     * dlopen returns. Since RTLD_GLOBAL is not or'd in with
-     * RTLD_NOW the external symbols will not be global
-     */
-    handle = dlopen(path, RTLD_NOW);
-    if (handle == NULL) {
-        char const *err_str = dlerror();
-        LOGW("load: module=%s error=%s", path, err_str);
-        status = -EINVAL;
-        goto done;
-    }
-
-    /* Get the address of the struct hal_module_info. */
-    const char *sym = HAL_MODULE_INFO_SYM_AS_STR;
-    hmi = (const struct hw_module_t *)dlsym(handle, sym);
-    if (hmi == NULL) {
-        char const *err_str = dlerror();
-        LOGE("load: couldn't find symbol %s", sym);
-        status = -EINVAL;
-        goto done;
-    }
-
-    /* Check that the id matches */
-    if (strcmp(id, hmi->id) != 0) {
-        LOGE("load: id=%s != hmi->id=%s", id, hmi->id);
-        status = -EINVAL;
-        goto done;
-    }
-
-    /* success */
-    status = 0;
-
-done:
-    if (status != 0) {
-        hmi = NULL;
-        if (handle != NULL) {
-            dlclose(handle);
-            handle = NULL;
-        }
-    }
-
-    *pHmi = hmi;
-    *pHandle = handle;
-
-    LOGV("load: X id=%s path=%s hmi=%p pHandle=%p status=%d",
-         id, path, *pHmi, *pHandle, status);
-    return status;
-}
-
-int hw_get_module(const char *id, const struct hw_module_t **module) 
-{
-    int status;
-    const struct hw_module_t *hmi = NULL;
-    char path[PATH_MAX];
-    char variant[PATH_MAX];
-    void *handle = NULL;
-    int i;
-
-    /*
-     * Here we rely on the fact that calling dlopen multiple times on
-     * the same .so will simply increment a refcount (and not load
-     * a new copy of the library).
-     * We also assume that dlopen() is thread-safe.
-     */
-    
-    LOGV("hal_module_info_get: Load module id=%s", id);
-
-    /* Loop through the configuration variants looking for a module */
-    status = -EINVAL;
-    for (i = 0; (status != 0) && (i < HAL_VARIANT_KEYS_COUNT); i++) {
-
-        /* Get variant or default */
-        if (strcmp(variant_keys[i], HAL_DEFAULT_VARIANT) == 0) {
-            strncpy(variant, HAL_DEFAULT_VARIANT, sizeof(variant)-1);
-            variant[sizeof(variant)-1] = 0;
-        } else {
-            if (property_get(variant_keys[i], variant, NULL) == 0) {
-                continue;
-            }
-        }
-
-        /* Construct the path then try to load */
-        snprintf(path, sizeof(path), "%s/%s.%s.so",
-                HAL_LIBRARY_PATH, id, variant);
-        status = load(id, path, &handle, &hmi);
-    }
-    if (status != 0) {
-        hmi = NULL;
-        if (handle != NULL) {
-            dlclose(handle);
-        }
-    }
-    
-    *module = hmi;
-    LOGV("hal_module_info_get: X id=%s hmi=%p status=%d", id, hmi, status);
-
-    return status;
-}
diff --git a/include/hardware/copybit.h b/include/hardware/copybit.h
deleted file mode 100644
index 7774cd2..0000000
--- a/include/hardware/copybit.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef ANDROID_COPYBIT_INTERFACE_H
-#define ANDROID_COPYBIT_INTERFACE_H
-
-#include <hardware/hardware.h>
-
-#include <stdint.h>
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-__BEGIN_DECLS
-
-/**
- * The id of this module
- */
-#define COPYBIT_HARDWARE_MODULE_ID "copybit"
-
-/**
- * Name of the graphics device to open
- */
-#define COPYBIT_HARDWARE_COPYBIT0 "copybit0"
-
-/* supported pixel-formats. these must be compatible with
- * graphics/PixelFormat.java, ui/PixelFormat.h, pixelflinger/format.h
- */
-enum {
-    COPYBIT_FORMAT_RGBA_8888    = HAL_PIXEL_FORMAT_RGBA_8888,
-    COPYBIT_FORMAT_RGB_565      = HAL_PIXEL_FORMAT_RGB_565,
-    COPYBIT_FORMAT_BGRA_8888    = HAL_PIXEL_FORMAT_BGRA_8888,
-    COPYBIT_FORMAT_RGBA_5551    = HAL_PIXEL_FORMAT_RGBA_5551,
-    COPYBIT_FORMAT_RGBA_4444    = HAL_PIXEL_FORMAT_RGBA_4444,
-    COPYBIT_FORMAT_YCbCr_422_SP = HAL_PIXEL_FORMAT_YCbCr_422_SP,
-    COPYBIT_FORMAT_YCbCr_420_SP = HAL_PIXEL_FORMAT_YCbCr_420_SP,
-};
-
-/* name for copybit_set_parameter */
-enum {
-    /* rotation of the source image in degrees (0 to 359) */
-    COPYBIT_ROTATION_DEG    = 1,
-    /* plane alpha value */
-    COPYBIT_PLANE_ALPHA     = 2,
-    /* enable or disable dithering */
-    COPYBIT_DITHER          = 3,
-    /* transformation applied (this is a superset of COPYBIT_ROTATION_DEG) */
-    COPYBIT_TRANSFORM       = 4,
-};
-
-/* values for copybit_set_parameter(COPYBIT_TRANSFORM) */
-enum {
-    /* flip source image horizontally */
-    COPYBIT_TRANSFORM_FLIP_H    = HAL_TRANSFORM_FLIP_H,
-    /* flip source image vertically */
-    COPYBIT_TRANSFORM_FLIP_V    = HAL_TRANSFORM_FLIP_V,
-    /* rotate source image 90 degres */
-    COPYBIT_TRANSFORM_ROT_90    = HAL_TRANSFORM_ROT_90,
-    /* rotate source image 180 degres */
-    COPYBIT_TRANSFORM_ROT_180   = HAL_TRANSFORM_ROT_180,
-    /* rotate source image 270 degres */
-    COPYBIT_TRANSFORM_ROT_270   = HAL_TRANSFORM_ROT_270,
-};
-
-/* enable/disable value copybit_set_parameter */
-enum {
-    COPYBIT_DISABLE = 0,
-    COPYBIT_ENABLE  = 1
-};
-
-/* use get_static_info() to query static informations about the hardware */
-enum {
-    /* Maximum amount of minification supported by the hardware*/
-    COPYBIT_MINIFICATION_LIMIT  = 1,
-    /* Maximum amount of magnification supported by the hardware */
-    COPYBIT_MAGNIFICATION_LIMIT = 2,
-    /* Number of fractional bits support by the scaling engine */
-    COPYBIT_SCALING_FRAC_BITS   = 3,
-    /* Supported rotation step in degres. */
-    COPYBIT_ROTATION_STEP_DEG   = 4,
-};
-
-/* Image structure */
-struct copybit_image_t {
-    /* width */
-    uint32_t    w;
-    /* height */
-    uint32_t    h;
-    /* format COPYBIT_FORMAT_xxx */
-    int32_t     format;
-    /* offset from base to first pixel */
-    uint32_t    offset;
-    /* base of buffer with image */
-    void       *base;
-    /* file descriptor for image */
-    int         fd;
-};
-
-/* Rectangle */
-struct copybit_rect_t {
-    /* left */
-    int l;
-    /* top */
-    int t;
-    /* right */
-    int r;
-    /* bottom */
-    int b;
-};
-
-/* Region */
-struct copybit_region_t {
-    int (*next)(struct copybit_region_t const *region, struct copybit_rect_t *rect);
-};
-
-/**
- * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
- * and the fields of this data structure must begin with hw_module_t
- * followed by module specific information.
- */
-struct copybit_module_t {
-    struct hw_module_t common;
-};
-
-/**
- * Every device data structure must begin with hw_device_t
- * followed by module specific public methods and attributes.
- */
-struct copybit_device_t {
-    struct hw_device_t common;
-
-    /**
-     * Set a copybit parameter.
-     *
-     * @param dev from open
-     * @param name one for the COPYBIT_NAME_xxx
-     * @param value one of the COPYBIT_VALUE_xxx
-     *
-     * @return 0 if successful
-     */
-    int (*set_parameter)(struct copybit_device_t *dev, int name, int value);
-
-    /**
-     * Get a static copybit information.
-     *
-     * @param dev from open
-     * @param name one of the COPYBIT_STATIC_xxx
-     *
-     * @return value or -EINVAL if error
-     */
-    int (*get)(struct copybit_device_t *dev, int name);
-
-    /**
-     * Execute the bit blit copy operation
-     *
-     * @param dev from open
-     * @param dst is the destination image
-     * @param src is the source image
-     * @param region the clip region
-     *
-     * @return 0 if successful
-     */
-    int (*blit)(struct copybit_device_t *dev,
-                struct copybit_image_t const *dst,
-                struct copybit_image_t const *src,
-                struct copybit_region_t const *region);
-
-    /**
-     * Execute the stretch bit blit copy operation
-     *
-     * @param dev from open
-     * @param dst is the destination image
-     * @param src is the source image
-     * @param dst_rect is the destination rectangle
-     * @param src_rect is the source rectangle
-     * @param region the clip region
-     *
-     * @return 0 if successful
-     */
-    int (*stretch)(struct copybit_device_t *dev,
-                   struct copybit_image_t const *dst,
-                   struct copybit_image_t const *src,
-                   struct copybit_rect_t const *dst_rect,
-                   struct copybit_rect_t const *src_rect,
-                   struct copybit_region_t const *region);
-};
-
-
-/** convenience API for opening and closing a device */
-
-static inline int copybit_open(const struct hw_module_t* module, 
-        struct copybit_device_t** device) {
-    return module->methods->open(module, 
-            COPYBIT_HARDWARE_COPYBIT0, (struct hw_device_t**)device);
-}
-
-static inline int copybit_close(struct copybit_device_t* device) {
-    return device->common.close(&device->common);
-}
-
-
-__END_DECLS
-
-#endif  // ANDROID_COPYBIT_INTERFACE_H
diff --git a/include/hardware/hardware.h b/include/hardware/hardware.h
deleted file mode 100644
index 5325744..0000000
--- a/include/hardware/hardware.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef ANDROID_INCLUDE_HARDWARE_HARDWARE_H
-#define ANDROID_INCLUDE_HARDWARE_HARDWARE_H
-
-#include <stdint.h>
-#include <sys/cdefs.h>
-
-__BEGIN_DECLS
-
-/*
- * Value for the hw_module_t.tag field
- */
-#define HARDWARE_MODULE_TAG 'HWMT'
-#define HARDWARE_DEVICE_TAG 'HWDT'
-
-struct hw_module_t;
-struct hw_module_methods_t;
-struct hw_device_t;
-
-/**
- * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
- * and the fields of this data structure must begin with hw_module_t
- * followed by module specific information.
- */
-struct hw_module_t {
-    /** tag must be initialized to HARDWARE_MODULE_TAG */
-    uint32_t tag;
-
-    /** major version number for the module */
-    uint16_t version_major;
-
-    /** minor version number of the module */
-    uint16_t version_minor;
-
-    /** Identifier of module */
-    const char *id;
-
-    /** Name of this module */
-    const char *name;
-
-    /** Author/owner/implementor of the module */
-    const char *author;
-
-    /** Modules methods */
-    struct hw_module_methods_t* methods;
-    
-    /** padding to 128 bytes, reserved for future use */
-    uint32_t reserved[32-6];
-};
-
-struct hw_module_methods_t {
-    /** Open a specific device */
-    int (*open)(const struct hw_module_t* module, const char* id,
-            struct hw_device_t** device);
-};
-
-/**
- * Every device data structure must begin with hw_device_t
- * followed by module specific public methods and attributes.
- */
-struct hw_device_t {
-    /** tag must be initialized to HARDWARE_DEVICE_TAG */
-    uint32_t tag;
-
-    /** version number for hw_device_t */
-    uint32_t version;
-
-    /** reference to the module this device belongs to */
-    struct hw_module_t* module;
-
-    /** padding reserved for future use */
-    uint32_t reserved[12];
-
-    /** Close this device */
-    int (*close)(struct hw_device_t* device);
-};
-
-/**
- * Name of the hal_module_info 
- */
-#define HAL_MODULE_INFO_SYM         HMI
-
-/**
- * Name of the hal_module_info as a string
- */
-#define HAL_MODULE_INFO_SYM_AS_STR  "HMI"
-
-/**
- * Get the module info associated with a module by id.
- * @return: 0 == success, <0 == error and *pHmi == NULL
- */
-int hw_get_module(const char *id, const struct hw_module_t **module);
-
-
-/**
- * pixel format definitions
- */
-
-enum {
-    HAL_PIXEL_FORMAT_RGBA_8888    = 1,
-    HAL_PIXEL_FORMAT_RGB_565      = 4,
-    HAL_PIXEL_FORMAT_BGRA_8888    = 5,
-    HAL_PIXEL_FORMAT_RGBA_5551    = 6,
-    HAL_PIXEL_FORMAT_RGBA_4444    = 7,
-    HAL_PIXEL_FORMAT_YCbCr_422_SP = 0x10,
-    HAL_PIXEL_FORMAT_YCbCr_420_SP = 0x11,
-    HAL_PIXEL_FORMAT_YCbCr_422_P  = 0x12,
-    HAL_PIXEL_FORMAT_YCbCr_420_P  = 0x13,
-    HAL_PIXEL_FORMAT_YCbCr_422_I  = 0x14,
-    HAL_PIXEL_FORMAT_YCbCr_420_I  = 0x15
-};
-
-
-/**
- * Transformation definitions
- */
-
-enum {
-    /* flip source image horizontally */
-    HAL_TRANSFORM_FLIP_H    = 0x01,
-    /* flip source image vertically */
-    HAL_TRANSFORM_FLIP_V    = 0x02,
-    /* rotate source image 90 degres */
-    HAL_TRANSFORM_ROT_90    = 0x04,
-    /* rotate source image 180 degres */
-    HAL_TRANSFORM_ROT_180   = 0x03,
-    /* rotate source image 270 degres */
-    HAL_TRANSFORM_ROT_270   = 0x07,
-};
-
-__END_DECLS
-
-#endif  /* ANDROID_INCLUDE_HARDWARE_HARDWARE_H */
diff --git a/include/hardware/overlay.h b/include/hardware/overlay.h
deleted file mode 100644
index 92992d1..0000000
--- a/include/hardware/overlay.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef ANDROID_OVERLAY_INTERFACE_H
-#define ANDROID_OVERLAY_INTERFACE_H
-
-#include <cutils/native_handle.h>
-
-#include <hardware/hardware.h>
-
-#include <stdint.h>
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-__BEGIN_DECLS
-
-/**
- * The id of this module
- */
-#define OVERLAY_HARDWARE_MODULE_ID "overlay"
-
-/**
- * Name of the overlay device to open
- */
-#define OVERLAY_HARDWARE_CONTROL    "control"
-#define OVERLAY_HARDWARE_DATA       "data"
-
-/*****************************************************************************/
-
-/* possible overlay formats */
-enum {
-    OVERLAY_FORMAT_RGBA_8888    = HAL_PIXEL_FORMAT_RGBA_8888,
-    OVERLAY_FORMAT_RGB_565      = HAL_PIXEL_FORMAT_RGB_565,
-    OVERLAY_FORMAT_BGRA_8888    = HAL_PIXEL_FORMAT_BGRA_8888,
-    OVERLAY_FORMAT_YCbCr_422_I  = HAL_PIXEL_FORMAT_YCbCr_422_I,
-    OVERLAY_FORMAT_YCbCr_420_I  = HAL_PIXEL_FORMAT_YCbCr_420_I
-};
-
-/* values for copybit_set_parameter(OVERLAY_TRANSFORM) */
-enum {
-    /* flip source image horizontally */
-    OVERLAY_TRANSFORM_FLIP_H    = HAL_TRANSFORM_FLIP_V,
-    /* flip source image vertically */
-    OVERLAY_TRANSFORM_FLIP_V    = HAL_TRANSFORM_FLIP_H,
-    /* rotate source image 90 degrees */
-    OVERLAY_TRANSFORM_ROT_90    = HAL_TRANSFORM_ROT_90,
-    /* rotate source image 180 degrees */
-    OVERLAY_TRANSFORM_ROT_180   = HAL_TRANSFORM_ROT_180,
-    /* rotate source image 270 degrees */
-    OVERLAY_TRANSFORM_ROT_270   = HAL_TRANSFORM_ROT_270
-};
-
-/* names for setParameter() */
-enum {
-    /* rotation of the source image in degrees (0 to 359) */
-    OVERLAY_ROTATION_DEG  = 1,
-    /* enable or disable dithering */
-    OVERLAY_DITHER        = 3,
-    /* transformation applied (this is a superset of COPYBIT_ROTATION_DEG) */
-    OVERLAY_TRANSFORM    = 4,
-};
-
-/* enable/disable value setParameter() */
-enum {
-    OVERLAY_DISABLE = 0,
-    OVERLAY_ENABLE  = 1
-};
-
-/* names for get() */
-enum {
-    /* Maximum amount of minification supported by the hardware*/
-    OVERLAY_MINIFICATION_LIMIT      = 1,
-    /* Maximum amount of magnification supported by the hardware */
-    OVERLAY_MAGNIFICATION_LIMIT     = 2,
-    /* Number of fractional bits support by the overlay scaling engine */
-    OVERLAY_SCALING_FRAC_BITS       = 3,
-    /* Supported rotation step in degrees. */
-    OVERLAY_ROTATION_STEP_DEG       = 4,
-    /* horizontal alignment in pixels */
-    OVERLAY_HORIZONTAL_ALIGNMENT    = 5,
-    /* vertical alignment in pixels */
-    OVERLAY_VERTICAL_ALIGNMENT      = 6,
-    /* width alignment restrictions. negative number for max. power-of-two */
-    OVERLAY_WIDTH_ALIGNMENT         = 7,
-    /* height alignment restrictions. negative number for max. power-of-two */
-    OVERLAY_HEIGHT_ALIGNMENT        = 8,
-};
-
-/*****************************************************************************/
-
-/* opaque reference to an Overlay kernel object */
-typedef const native_handle* overlay_handle_t;
-
-typedef struct overlay_t {
-    uint32_t            w;
-    uint32_t            h;
-    int32_t             format;
-    uint32_t            w_stride;
-    uint32_t            h_stride;
-    uint32_t            reserved[3];
-    /* returns a reference to this overlay's handle (the caller doesn't
-     * take ownership) */
-    overlay_handle_t    (*getHandleRef)(struct overlay_t* overlay);
-    uint32_t            reserved_procs[7];
-} overlay_t;
-
-typedef void* overlay_buffer_t;
-
-/*****************************************************************************/
-
-/**
- * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
- * and the fields of this data structure must begin with hw_module_t
- * followed by module specific information.
- */
-struct overlay_module_t {
-    struct hw_module_t common;
-};
-
-/*****************************************************************************/
-
-/**
- * Every device data structure must begin with hw_device_t
- * followed by module specific public methods and attributes.
- */
-
-struct overlay_control_device_t {
-    struct hw_device_t common;
-    
-    /* get static informations about the capabilities of the overlay engine */
-    int (*get)(struct overlay_control_device_t *dev, int name);
-
-    /* creates an overlay matching the given parameters as closely as possible.
-     * returns an error if no more overlays are available. The actual
-     * size and format is returned in overlay_t. */
-    overlay_t* (*createOverlay)(struct overlay_control_device_t *dev,
-            uint32_t w, uint32_t h, int32_t format);
-    
-    /* destroys an overlay. This call releases all
-     * resources associated with overlay_t and make it invalid */
-    void (*destroyOverlay)(struct overlay_control_device_t *dev,
-            overlay_t* overlay);
-
-    /* set position and scaling of the given overlay as closely as possible.
-     * if scaling cannot be performed, overlay must be centered. */
-    int (*setPosition)(struct overlay_control_device_t *dev,
-            overlay_t* overlay, 
-            int x, int y, uint32_t w, uint32_t h);
-
-    /* returns the actual position and size of the overlay */
-    int (*getPosition)(struct overlay_control_device_t *dev,
-            overlay_t* overlay, 
-            int* x, int* y, uint32_t* w, uint32_t* h);
-
-    /* sets configurable parameters for this overlay. returns an error if not
-     * supported. */
-    int (*setParameter)(struct overlay_control_device_t *dev,
-            overlay_t* overlay, int param, int value);
-};
-
-
-struct overlay_data_device_t {
-    struct hw_device_t common;
-
-    /* initialize the overlay from the given handle. this associates this
-     * overlay data module to its control module */
-    int (*initialize)(struct overlay_data_device_t *dev,
-            overlay_handle_t handle);
-    
-    /* blocks until an overlay buffer is available and return that buffer. */
-    int (*dequeueBuffer)(struct overlay_data_device_t *dev,
-		         overlay_buffer_t *buf);
-
-    /* release the overlay buffer and post it */
-    int (*queueBuffer)(struct overlay_data_device_t *dev,
-            overlay_buffer_t buffer);
-
-    /* returns the address of a given buffer if supported, NULL otherwise. */
-    void* (*getBufferAddress)(struct overlay_data_device_t *dev,
-            overlay_buffer_t buffer);
-
-    int (*getBufferCount)(struct overlay_data_device_t *dev);
-};
-
-
-/*****************************************************************************/
-
-/** convenience API for opening and closing a device */
-
-static inline int overlay_control_open(const struct hw_module_t* module, 
-        struct overlay_control_device_t** device) {
-    return module->methods->open(module, 
-            OVERLAY_HARDWARE_CONTROL, (struct hw_device_t**)device);
-}
-
-static inline int overlay_control_close(struct overlay_control_device_t* device) {
-    return device->common.close(&device->common);
-}
-
-static inline int overlay_data_open(const struct hw_module_t* module, 
-        struct overlay_data_device_t** device) {
-    return module->methods->open(module, 
-            OVERLAY_HARDWARE_DATA, (struct hw_device_t**)device);
-}
-
-static inline int overlay_data_close(struct overlay_data_device_t* device) {
-    return device->common.close(&device->common);
-}
-
-__END_DECLS
-
-#endif  // ANDROID_OVERLAY_INTERFACE_H
diff --git a/include/hardware/sensors.h b/include/hardware/sensors.h
deleted file mode 100644
index 094b3ee..0000000
--- a/include/hardware/sensors.h
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef ANDROID_SENSORS_INTERFACE_H
-#define ANDROID_SENSORS_INTERFACE_H
-
-#include <stdint.h>
-#include <sys/cdefs.h>
-#include <sys/types.h>
-
-#include <hardware/hardware.h>
-
-__BEGIN_DECLS
-
-/**
- * The id of this module
- */
-#define SENSORS_HARDWARE_MODULE_ID "sensors"
-
-/**
- * Name of the sensors device to open
- */
-#define SENSORS_HARDWARE_CONTROL    "control"
-#define SENSORS_HARDWARE_DATA       "data"
-
-/**
- * Handles must be higher than SENSORS_HANDLE_BASE and must be unique.
- * A Handle identifies a given sensors. The handle is used to activate
- * and/or deactivate sensors.
- * In this version of the API there can only be 256 handles.
- */
-#define SENSORS_HANDLE_BASE             0
-#define SENSORS_HANDLE_BITS             8
-#define SENSORS_HANDLE_COUNT            (1<<SENSORS_HANDLE_BITS)
-
-
-/**
- * Sensor types
- */
-#define SENSOR_TYPE_ACCELEROMETER       1
-#define SENSOR_TYPE_MAGNETIC_FIELD      2
-#define SENSOR_TYPE_ORIENTATION         3
-#define SENSOR_TYPE_GYROSCOPE           4
-#define SENSOR_TYPE_LIGHT               5
-#define SENSOR_TYPE_PRESSURE            6
-#define SENSOR_TYPE_TEMPERATURE         7
-#define SENSOR_TYPE_PROXIMITY           8
-
-/**
- * Values returned by the accelerometer in various locations in the universe.
- * all values are in SI units (m/s^2)
- */
-
-#define GRAVITY_SUN             (275.0f)
-#define GRAVITY_MERCURY         (3.70f)
-#define GRAVITY_VENUS           (8.87f)
-#define GRAVITY_EARTH           (9.80665f)
-#define GRAVITY_MOON            (1.6f)
-#define GRAVITY_MARS            (3.71f)
-#define GRAVITY_JUPITER         (23.12f)
-#define GRAVITY_SATURN          (8.96f)
-#define GRAVITY_URANUS          (8.69f)
-#define GRAVITY_NEPTUNE         (11.0f)
-#define GRAVITY_PLUTO           (0.6f)
-#define GRAVITY_DEATH_STAR_I    (0.000000353036145f)
-#define GRAVITY_THE_ISLAND      (4.815162342f)
-
-/** Maximum magnetic field on Earth's surface */
-#define MAGNETIC_FIELD_EARTH_MAX    (60.0f)
-
-/** Minimum magnetic field on Earth's surface */
-#define MAGNETIC_FIELD_EARTH_MIN    (30.0f)
-
-
-/**
- * status of each sensor
- */
-
-#define SENSOR_STATUS_UNRELIABLE        0
-#define SENSOR_STATUS_ACCURACY_LOW      1
-#define SENSOR_STATUS_ACCURACY_MEDIUM   2
-#define SENSOR_STATUS_ACCURACY_HIGH     3
-
-/**
- * Definition of the axis
- * ----------------------
- *
- * This API is relative to the screen of the device in its default orientation,
- * that is, if the device can be used in portrait or landscape, this API
- * is only relative to the NATURAL orientation of the screen. In other words,
- * the axis are not swapped when the device's screen orientation changes.
- * Higher level services /may/ perform this transformation.
- *
- *   x<0         x>0
- *                ^
- *                |
- *    +-----------+-->  y>0
- *    |           |
- *    |           |
- *    |           |
- *    |           |   / z<0
- *    |           |  /
- *    |           | /
- *    O-----------+/
- *    |[]  [ ]  []/
- *    +----------/+     y<0
- *              /
- *             /
- *           |/ z>0 (toward the sky)
- *
- *    O: Origin (x=0,y=0,z=0)
- *
- *
- * Orientation
- * ----------- 
- * 
- * All values are angles in degrees.
- * 
- * azimuth: angle between the magnetic north direction and the Y axis, around 
- *  the Z axis (0<=azimuth<360).
- *      0=North, 90=East, 180=South, 270=West
- * 
- * pitch: Rotation around X axis (-180<=pitch<=180), with positive values when
- *  the z-axis moves toward the y-axis.
- *
- * roll: Rotation around Y axis (-90<=roll<=90), with positive values when
- *  the z-axis moves AWAY from the x-axis.
- * 
- * Note: This definition is different from yaw, pitch and roll used in aviation
- *  where the X axis is along the long side of the plane (tail to nose).
- *  
- *  
- * Acceleration
- * ------------
- *
- *  All values are in SI units (m/s^2) and measure the acceleration of the
- *  device minus the force of gravity.
- *  
- *  x: Acceleration minus Gx on the x-axis 
- *  y: Acceleration minus Gy on the y-axis 
- *  z: Acceleration minus Gz on the z-axis
- *  
- *  Examples:
- *    When the device lies flat on a table and is pushed on its left side
- *    toward the right, the x acceleration value is positive.
- *    
- *    When the device lies flat on a table, the acceleration value is +9.81,
- *    which correspond to the acceleration of the device (0 m/s^2) minus the
- *    force of gravity (-9.81 m/s^2).
- *    
- *    When the device lies flat on a table and is pushed toward the sky, the
- *    acceleration value is greater than +9.81, which correspond to the
- *    acceleration of the device (+A m/s^2) minus the force of 
- *    gravity (-9.81 m/s^2).
- *    
- *    
- * Magnetic Field
- * --------------
- * 
- *  All values are in micro-Tesla (uT) and measure the ambient magnetic
- *  field in the X, Y and Z axis.
- *    
- */
-typedef struct {
-    union {
-        float v[3];
-        struct {
-            float x;
-            float y;
-            float z;
-        };
-        struct {
-            float azimuth;
-            float pitch;
-            float roll;
-        };
-    };
-    int8_t status;
-    uint8_t reserved[3];
-} sensors_vec_t;
-
-/**
- * Union of the various types of sensor data
- * that can be returned.
- */
-typedef struct {
-    /* sensor identifier */
-    int             sensor;
-
-    union {
-        /* x,y,z values of the given sensor */
-        sensors_vec_t   vector;
-
-        /* orientation values are in degrees */
-        sensors_vec_t   orientation;
-
-        /* acceleration values are in meter per second per second (m/s^2) */
-        sensors_vec_t   acceleration;
-
-        /* magnetic vector values are in micro-Tesla (uT) */
-        sensors_vec_t   magnetic;
-
-        /* temperature is in degrees centigrade (Celsius) */
-        float           temperature;
-    };
-
-    /* time is in nanosecond */
-    int64_t         time;
-
-    uint32_t        reserved;
-} sensors_data_t;
-
-
-struct sensor_t;
-
-/**
- * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM
- * and the fields of this data structure must begin with hw_module_t
- * followed by module specific information.
- */
-struct sensors_module_t {
-    struct hw_module_t common;
-
-    /**
-     * Enumerate all available sensors. The list is returned in "list".
-     * @return number of sensors in the list
-     */
-    int (*get_sensors_list)(struct sensors_module_t* module,
-            struct sensor_t const** list);
-};
-
-struct sensor_t {
-    /* name of this sensors */
-    const char*     name;
-    /* vendor of the hardware part */
-    const char*     vendor;
-    /* version of the hardware part + driver. The value of this field is
-     * left to the implementation and doesn't have to be monotonicaly
-     * increasing.
-     */    
-    int             version;
-    /* handle that identifies this sensors. This handle is used to activate
-     * and deactivate this sensor. The value of the handle must be 8 bits
-     * in this version of the API. 
-     */
-    int             handle;
-    /* this sensor's type. */
-    int             type;
-    /* maximaum range of this sensor's value in SI units */
-    float           maxRange;
-    /* smallest difference between two values reported by this sensor */
-    float           resolution;
-    /* rough estimate of this sensor's power consumption in mA */
-    float           power;
-    /* reserved fields, must be zero */
-    void*           reserved[9];
-};
-
-
-/**
- * Every device data structure must begin with hw_device_t
- * followed by module specific public methods and attributes.
- */
-struct sensors_control_device_t {
-    struct hw_device_t common;
-    
-    /**
-     * Returns the fd which will be the parameter to
-     * sensors_data_device_t::open_data(). 
-     * The caller takes ownership of this fd. This is intended to be
-     * passed cross processes.
-     *
-     * @return a fd if successful, < 0 on error
-     */
-    int (*open_data_source)(struct sensors_control_device_t *dev);
-    
-    /** Activate/deactivate one sensor.
-     *
-     * @param handle is the handle of the sensor to change.
-     * @param enabled set to 1 to enable, or 0 to disable the sensor.
-     *
-     * @return 0 on success, negative errno code otherwise
-     */
-    int (*activate)(struct sensors_control_device_t *dev, 
-            int handle, int enabled);
-    
-    /**
-     * Set the delay between sensor events in ms
-     *
-     * @return 0 if successful, < 0 on error
-     */
-    int (*set_delay)(struct sensors_control_device_t *dev, int32_t ms);
-
-    /**
-     * Causes sensors_data_device_t.poll() to return -EWOULDBLOCK immediately.
-     */
-    int (*wake)(struct sensors_control_device_t *dev);
-};
-
-struct sensors_data_device_t {
-    struct hw_device_t common;
-
-    /**
-     * Prepare to read sensor data.
-     *
-     * This routine does NOT take ownership of the fd
-     * and must not close it. Typically this routine would
-     * use a duplicate of the fd parameter.
-     *
-     * @param fd from sensors_control_open.
-     *
-     * @return 0 if successful, < 0 on error
-     */
-    int (*data_open)(struct sensors_data_device_t *dev, int fd);
-    
-    /**
-     * Caller has completed using the sensor data.
-     * The caller will not be blocked in sensors_data_poll
-     * when this routine is called.
-     *
-     * @return 0 if successful, < 0 on error
-     */
-    int (*data_close)(struct sensors_data_device_t *dev);
-    
-    /**
-     * Return sensor data for one of the enabled sensors.
-     *
-     * @return sensor handle for the returned data, 0x7FFFFFFF when 
-     * sensors_control_device_t.wake() is called and -errno on error
-     *  
-     */
-    int (*poll)(struct sensors_data_device_t *dev, 
-            sensors_data_t* data);
-};
-
-
-/** convenience API for opening and closing a device */
-
-static inline int sensors_control_open(const struct hw_module_t* module, 
-        struct sensors_control_device_t** device) {
-    return module->methods->open(module, 
-            SENSORS_HARDWARE_CONTROL, (struct hw_device_t**)device);
-}
-
-static inline int sensors_control_close(struct sensors_control_device_t* device) {
-    return device->common.close(&device->common);
-}
-
-static inline int sensors_data_open(const struct hw_module_t* module, 
-        struct sensors_data_device_t** device) {
-    return module->methods->open(module, 
-            SENSORS_HARDWARE_DATA, (struct hw_device_t**)device);
-}
-
-static inline int sensors_data_close(struct sensors_data_device_t* device) {
-    return device->common.close(&device->common);
-}
-
-
-__END_DECLS
-
-#endif  // ANDROID_SENSORS_INTERFACE_H
diff --git a/modules/README.android b/modules/README.android
deleted file mode 100644
index 57abb72..0000000
--- a/modules/README.android
+++ /dev/null
@@ -1,23 +0,0 @@
-Default (and possibly architecture dependents) HAL modules go here. 
-
-
-libhardware.so eventually should contain *just* the HAL hub
-(hardware.c), everything in it should be rewritten as modules.
-
-Modules are .so in /system/libs/hw/ and have a well defined naming
-convention:
-
-    /system/libs/hw/<*_HARDWARE_MODULE_ID>.<ro.product.board>.so
-    /system/libs/hw/<*_HARDWARE_MODULE_ID>.<ro.board.platform>.so
-    /system/libs/hw/<*_HARDWARE_MODULE_ID>.<ro.arch>.so
-    /system/libs/hw/<*_HARDWARE_MODULE_ID>.default.so
-
-They also have a well defined interface which lives in include/hardware/.
-
-A module can have several variants: "default", "arch" and "board", and they're
-loaded in the "board", "arch" and "default" order.
-The source code for the "board" variant, usually lives under partners/...
-
-The source code for "default" and "arch" would usually
-live under hardware/modules/.
-
diff --git a/modules/overlay/Android.mk b/modules/overlay/Android.mk
deleted file mode 100644
index 44b55af..0000000
--- a/modules/overlay/Android.mk
+++ /dev/null
@@ -1,26 +0,0 @@
-# Copyright (C) 2008 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-
-LOCAL_PATH := $(call my-dir)
-
-# HAL module implemenation, not prelinked and stored in
-# hw/<OVERLAY_HARDWARE_MODULE_ID>.<ro.product.board>.so
-include $(CLEAR_VARS)
-LOCAL_PRELINK_MODULE := false
-LOCAL_MODULE_PATH := $(TARGET_OUT_SHARED_LIBRARIES)/hw
-LOCAL_SHARED_LIBRARIES := liblog
-LOCAL_SRC_FILES := overlay.cpp
-LOCAL_MODULE := overlay.trout
-include $(BUILD_SHARED_LIBRARY)
diff --git a/modules/overlay/README.android b/modules/overlay/README.android
deleted file mode 100644
index 971d619..0000000
--- a/modules/overlay/README.android
+++ /dev/null
@@ -1,3 +0,0 @@
-
-Skeleton for the "overlay" HAL module.
-
diff --git a/modules/overlay/overlay.cpp b/modules/overlay/overlay.cpp
deleted file mode 100644
index 0246b5b..0000000
--- a/modules/overlay/overlay.cpp
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2008 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#define LOG_TAG "Overlay"
-
-#include <hardware/hardware.h>
-#include <hardware/overlay.h>
-
-#include <fcntl.h>
-#include <errno.h>
-
-#include <cutils/log.h>
-#include <cutils/atomic.h>
-
-/*****************************************************************************/
-
-struct overlay_control_context_t {
-    struct overlay_control_device_t device;
-    /* our private state goes below here */
-};
-
-struct overlay_data_context_t {
-    struct overlay_data_device_t device;
-    /* our private state goes below here */
-};
-
-static int overlay_device_open(const struct hw_module_t* module, const char* name,
-        struct hw_device_t** device);
-
-static struct hw_module_methods_t overlay_module_methods = {
-    open: overlay_device_open
-};
-
-const struct overlay_module_t HAL_MODULE_INFO_SYM = {
-    common: {
-        tag: HARDWARE_MODULE_TAG,
-        version_major: 1,
-        version_minor: 0,
-        id: OVERLAY_HARDWARE_MODULE_ID,
-        name: "Sample Overlay module",
-        author: "The Android Open Source Project",
-        methods: &overlay_module_methods,
-    }
-};
-
-/*****************************************************************************/
-
-/*
- * This is the overlay_t object, it is returned to the user and represents
- * an overlay.
- * This handles will be passed across processes and possibly given to other
- * HAL modules (for instance video decode modules).
- */
-
-class overlay_object : public overlay_t {
-    
-    struct handle_t : public native_handle {
-        /* add the data fields we need here, for instance: */
-        int width;
-        int height;
-    };
-    
-    handle_t mHandle;
-    
-    static overlay_handle_t getHandleRef(struct overlay_t* overlay) {
-        /* returns a reference to the handle, caller doesn't take ownership */
-        return &(static_cast<overlay_object *>(overlay)->mHandle);
-    }
-    
-public:
-    overlay_object() {
-        this->overlay_t::getHandleRef = getHandleRef;
-        mHandle.version = sizeof(native_handle);
-        mHandle.numFds = 0;
-        mHandle.numInts = 2; // extra ints we have in  our handle
-    }
-};
-
-// ****************************************************************************
-// Control module
-// ****************************************************************************
-
-static int overlay_get(struct overlay_control_device_t *dev, int name) {
-    int result = -1;
-    switch (name) {
-        case OVERLAY_MINIFICATION_LIMIT:
-            result = 0; // 0 = no limit
-            break;
-        case OVERLAY_MAGNIFICATION_LIMIT:
-            result = 0; // 0 = no limit
-            break;
-        case OVERLAY_SCALING_FRAC_BITS:
-            result = 0; // 0 = infinite
-            break;
-        case OVERLAY_ROTATION_STEP_DEG:
-            result = 90; // 90 rotation steps (for instance)
-            break;
-        case OVERLAY_HORIZONTAL_ALIGNMENT:
-            result = 1; // 1-pixel alignment
-            break;
-        case OVERLAY_VERTICAL_ALIGNMENT:
-            result = 1; // 1-pixel alignment
-            break;
-        case OVERLAY_WIDTH_ALIGNMENT:
-            result = 1; // 1-pixel alignment
-            break;
-        case OVERLAY_HEIGHT_ALIGNMENT:
-            result = 1; // 1-pixel alignment
-            break;
-    }
-    return result;
-}
-
-static overlay_t* overlay_createOverlay(struct overlay_control_device_t *dev,
-         uint32_t w, uint32_t h, int32_t format) 
-{
-    /* check the input params, reject if not supported or invalid */
-    switch (format) {
-        case OVERLAY_FORMAT_RGBA_8888:
-        case OVERLAY_FORMAT_RGB_565:
-        case OVERLAY_FORMAT_BGRA_8888:
-        case OVERLAY_FORMAT_YCbCr_422_SP:
-        case OVERLAY_FORMAT_YCbCr_420_SP:
-        case OVERLAY_FORMAT_YCbCr_422_I:
-        case OVERLAY_FORMAT_YCbCr_420_I:
-            break;
-        default:
-            return NULL;
-    }
-    
-    /* Create overlay object. Talk to the h/w here and adjust to what it can
-     * do. the overlay_t returned can  be a C++ object, subclassing overlay_t
-     * if needed.
-     * 
-     * we probably want to keep a list of the overlay_t created so they can
-     * all be cleaned up in overlay_close(). 
-     */
-    return new overlay_object( /* pass needed params here*/ );
-}
-
-static void overlay_destroyOverlay(struct overlay_control_device_t *dev,
-         overlay_t* overlay) 
-{
-    /* free resources associated with this overlay_t */
-    delete overlay;
-}
-
-static int overlay_setPosition(struct overlay_control_device_t *dev,
-         overlay_t* overlay, 
-         int x, int y, uint32_t w, uint32_t h) {
-    /* set this overlay's position (talk to the h/w) */
-    return -EINVAL;
-}
-
-static int overlay_getPosition(struct overlay_control_device_t *dev,
-         overlay_t* overlay, 
-         int* x, int* y, uint32_t* w, uint32_t* h) {
-    /* get this overlay's position */
-    return -EINVAL;
-}
-
-static int overlay_setParameter(struct overlay_control_device_t *dev,
-         overlay_t* overlay, int param, int value) {
-    
-    int result = 0;
-    /* set this overlay's parameter (talk to the h/w) */
-    switch (param) {
-        case OVERLAY_ROTATION_DEG:
-            /* if only 90 rotations are supported, the call fails
-             * for other values */
-            break;
-        case OVERLAY_DITHER: 
-            break;
-        case OVERLAY_TRANSFORM: 
-            // see OVERLAY_TRANSFORM_*
-            break;
-        default:
-            result = -EINVAL;
-            break;
-    }
-    return result;
-}
-
-static int overlay_control_close(struct hw_device_t *dev) 
-{
-    struct overlay_control_context_t* ctx = (struct overlay_control_context_t*)dev;
-    if (ctx) {
-        /* free all resources associated with this device here
-         * in particular the overlay_handle_t, outstanding overlay_t, etc...
-         */
-        free(ctx);
-    }
-    return 0;
-}
- 
-// ****************************************************************************
-// Data module
-// ****************************************************************************
-
-int overlay_initialize(struct overlay_data_device_t *dev,
-        overlay_handle_t handle)
-{
-    /* 
-     * overlay_handle_t should contain all the information to "inflate" this
-     * overlay. Typically it'll have a file descriptor, informations about
-     * how many buffers are there, etc...
-     * It is also the place to mmap all buffers associated with this overlay
-     * (see getBufferAddress).
-     * 
-     * NOTE: this function doesn't take ownership of overlay_handle_t
-     * 
-     */
-    
-    return -EINVAL;
-}
-
-int overlay_dequeueBuffer(struct overlay_data_device_t *dev,
-			  overlay_buffer_t* buf) 
-{
-    /* blocks until a buffer is available and return an opaque structure
-     * representing this buffer.
-     */
-    return -EINVAL;
-}
-
-int overlay_queueBuffer(struct overlay_data_device_t *dev,
-        overlay_buffer_t buffer)
-{
-    /* Mark this buffer for posting and recycle or free overlay_buffer_t. */
-    return -EINVAL;
-}
-
-void *overlay_getBufferAddress(struct overlay_data_device_t *dev,
-        overlay_buffer_t buffer)
-{
-    /* this may fail (NULL) if this feature is not supported. In that case,
-     * presumably, there is some other HAL module that can fill the buffer,
-     * using a DSP for instance */
-    return NULL;
-}
-
-static int overlay_data_close(struct hw_device_t *dev) 
-{
-    struct overlay_data_context_t* ctx = (struct overlay_data_context_t*)dev;
-    if (ctx) {
-        /* free all resources associated with this device here
-         * in particular all pending overlay_buffer_t if needed.
-         * 
-         * NOTE: overlay_handle_t passed in initialize() is NOT freed and
-         * its file descriptors are not closed (this is the responsibility
-         * of the caller).
-         */
-        free(ctx);
-    }
-    return 0;
-}
-
-/*****************************************************************************/
-
-static int overlay_device_open(const struct hw_module_t* module, const char* name,
-        struct hw_device_t** device)
-{
-    int status = -EINVAL;
-    if (!strcmp(name, OVERLAY_HARDWARE_CONTROL)) {
-        struct overlay_control_context_t *dev;
-        dev = (overlay_control_context_t*)malloc(sizeof(*dev));
-
-        /* initialize our state here */
-        memset(dev, 0, sizeof(*dev));
-
-        /* initialize the procs */
-        dev->device.common.tag = HARDWARE_DEVICE_TAG;
-        dev->device.common.version = 0;
-        dev->device.common.module = const_cast<hw_module_t*>(module);
-        dev->device.common.close = overlay_control_close;
-        
-        dev->device.get = overlay_get;
-        dev->device.createOverlay = overlay_createOverlay;
-        dev->device.destroyOverlay = overlay_destroyOverlay;
-        dev->device.setPosition = overlay_setPosition;
-        dev->device.getPosition = overlay_getPosition;
-        dev->device.setParameter = overlay_setParameter;
-
-        *device = &dev->device.common;
-        status = 0;
-    } else if (!strcmp(name, OVERLAY_HARDWARE_DATA)) {
-        struct overlay_data_context_t *dev;
-        dev = (overlay_data_context_t*)malloc(sizeof(*dev));
-
-        /* initialize our state here */
-        memset(dev, 0, sizeof(*dev));
-
-        /* initialize the procs */
-        dev->device.common.tag = HARDWARE_DEVICE_TAG;
-        dev->device.common.version = 0;
-        dev->device.common.module = const_cast<hw_module_t*>(module);
-        dev->device.common.close = overlay_data_close;
-        
-        dev->device.initialize = overlay_initialize;
-        dev->device.dequeueBuffer = overlay_dequeueBuffer;
-        dev->device.queueBuffer = overlay_queueBuffer;
-        dev->device.getBufferAddress = overlay_getBufferAddress;
-        
-        *device = &dev->device.common;
-        status = 0;
-    }
-    return status;
-}