am 5f9a7907: Merge "Header file for HDMI-CEC HAL interface definition" into klp-modular-dev

* commit '5f9a7907844ba5319957dd9913ef951d78709afb':
  Header file for HDMI-CEC HAL interface definition

1 files changed, 282 insertions, 0 deletions

diff --git a/include/hardware/hdmi_cec.h b/include/hardware/hdmi_cec.h
new file mode 100644
index 0000000..938e9dc
--- /dev/null
+++ b/include/hardware/hdmi_cec.h
@@ -0,0 +1,282 @@
+/*
+ * Copyright (C) 2014 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ANDROID_INCLUDE_HARDWARE_HDMI_CEC_H
+#define ANDROID_INCLUDE_HARDWARE_HDMI_CEC_H
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+
+#include <hardware/hardware.h>
+
+__BEGIN_DECLS
+
+#define HDMI_CEC_MODULE_API_VERSION_1_0 HARDWARE_MODULE_API_VERSION(1, 0)
+#define HDMI_CEC_MODULE_API_VERSION_CURRENT HDMI_MODULE_API_VERSION_1_0
+
+#define HDMI_CEC_DEVICE_API_VERSION_1_0 HARDWARE_DEVICE_API_VERSION(1, 0)
+#define HDMI_CEC_DEVICE_API_VERSION_CURRENT HDMI_DEVICE_API_VERSION_1_0
+
+#define HDMI_CEC_HARDWARE_MODULE_ID "hdmi_cec"
+#define HDMI_CEC_HARDWARE_INTERFACE "hdmi_cec_hw_if"
+
+typedef enum cec_device_type {
+    CEC_DEVICE_TV = 0,
+    CEC_DEVICE_RECORDER = 1,
+    CEC_DEVICE_RESERVED = 2,
+    CEC_DEVICE_TUNER = 3,
+    CEC_DEVICE_PLAYBACK = 4,
+    CEC_DEVICE_AUDIO_SYSTEM = 5,
+    CEC_DEVICE_MAX = CEC_DEVICE_AUDIO_SYSTEM
+} cec_device_type_t;
+
+typedef enum cec_logical_address {
+    CEC_ADDR_TV = 0,
+    CEC_ADDR_RECORDER_1 = 1,
+    CEC_ADDR_RECORDER_2 = 2,
+    CEC_ADDR_TUNER_1 = 3,
+    CEC_ADDR_PLAYBACK_1 = 4,
+    CEC_ADDR_AUDIO_SYSTEM = 5,
+    CEC_ADDR_TUNER_2 = 6,
+    CEC_ADDR_TUNER_3 = 7,
+    CEC_ADDR_PLAYBACK_2 = 8,
+    CEC_ADDR_RECORDER_3 = 9,
+    CEC_ADDR_TUNER_4 = 10,
+    CEC_ADDR_PLAYBACK_3 = 11,
+    CEC_ADDR_RESERVED_1 = 12,
+    CEC_ADDR_RESERVED_2 = 13,
+    CEC_ADDR_FREE_USE = 14,
+    CEC_ADDR_UNREGISTERED = 15,
+    CEC_ADDR_BROADCAST = 15
+} cec_logical_address_t;
+
+/*
+ * HDMI CEC messages
+ */
+enum cec_message_type {
+    CEC_MESSAGE_FEATURE_ABORT = 0x00,
+    CEC_MESSAGE_IMAGE_VIEW_ON = 0x04,
+    CEC_MESSAGE_TUNER_STEP_INCREMENT = 0x05,
+    CEC_MESSAGE_TUNER_STEP_DECREMENT = 0x06,
+    CEC_MESSAGE_TUNER_DEVICE_STATUS = 0x07,
+    CEC_MESSAGE_GIVE_TUNER_DEVICE_STATUS = 0x08,
+    CEC_MESSAGE_RECORD_ON = 0x09,
+    CEC_MESSAGE_RECORD_STATUS = 0x0A,
+    CEC_MESSAGE_RECORD_OFF = 0x0B,
+    CEC_MESSAGE_TEXT_VIEW_ON = 0x0D,
+    CEC_MESSAGE_RECORD_TV_SCREEN = 0x0F,
+    CEC_MESSAGE_GIVE_DECK_STATUS = 0x1A,
+    CEC_MESSAGE_DECK_STATUS = 0x1B,
+    CEC_MESSAGE_SET_MENU_LANGUAGE = 0x32,
+    CEC_MESSAGE_CLEAR_ANALOG_TIMER = 0x33,
+    CEC_MESSAGE_SET_ANALOG_TIMER = 0x34,
+    CEC_MESSAGE_TIMER_STATUS = 0x35,
+    CEC_MESSAGE_STANDBY = 0x36,
+    CEC_MESSAGE_PLAY = 0x41,
+    CEC_MESSAGE_DECK_CONTROL = 0x42,
+    CEC_MESSAGE_TIMER_CLEARED_STATUS = 0x043,
+    CEC_MESSAGE_USER_CONTROL_PRESSED = 0x44,
+    CEC_MESSAGE_USER_CONTROL_RELEASED = 0x45,
+    CEC_MESSAGE_GET_OSD_NAME = 0x46,
+    CEC_MESSAGE_SET_OSD_NAME = 0x47,
+    CEC_MESSAGE_SET_OSD_STRING = 0x64,
+    CEC_MESSAGE_SET_TIMER_PROGRAM_TITLE = 0x67,
+    CEC_MESSAGE_SYSTEM_AUDIO_MODE_REQUEST = 0x70,
+    CEC_MESSAGE_GIVE_AUDIO_STATUS = 0x71,
+    CEC_MESSAGE_SET_SYSTEM_AUDIO_MODE = 0x72,
+    CEC_MESSAGE_REPORT_AUDIO_STATUS = 0x7A,
+    CEC_MESSAGE_GIVE_SYSTEM_AUDIO_MODE_STATUS = 0x7D,
+    CEC_MESSAGE_SYSTEM_AUDIO_MODE_STATUS = 0x7E,
+    CEC_MESSAGE_ROUTING_CHANGE = 0x80,
+    CEC_MESSAGE_ROUTING_INFORMATION = 0x81,
+    CEC_MESSAGE_ACTIVE_SOURCE = 0x82,
+    CEC_MESSAGE_GIVE_PHYSICAL_ADDRESS = 0x83,
+    CEC_MESSAGE_REPORT_PHYSICAL_ADDRESS = 0x84,
+    CEC_MESSAGE_REQUEST_ACTIVE_SOURCE = 0x85,
+    CEC_MESSAGE_SET_STREAM_PATH = 0x86,
+    CEC_MESSAGE_DEVICE_VENDOR_ID = 0x87,
+    CEC_MESSAGE_VENDOR_COMMAND = 0x89,
+    CEC_MESSAGE_VENDOR_REMOTE_BUTTON_DOWN = 0x8A,
+    CEC_MESSAGE_VENDOR_REMOTE_BUTTON_UP = 0x8B,
+    CEC_MESSAGE_GIVE_DEVICE_VENDOR_ID = 0x8C,
+    CEC_MESSAGE_MENU_REQUEST = 0x8D,
+    CEC_MESSAGE_MENU_STATUS = 0x8E,
+    CEC_MESSAGE_GIVE_DEVICE_POWER_STATUS = 0x8F,
+    CEC_MESSAGE_REPORT_POWER_STATUS = 0x90,
+    CEC_MESSAGE_GET_MENU_LANGUAGE = 0x91,
+    CEC_MESSAGE_SELECT_ANALOG_SERVICE = 0x92,
+    CEC_MESSAGE_SELECT_DIGITAL_SERVICE = 0x93,
+    CEC_MESSAGE_SET_DIGITAL_TIMER = 0x97,
+    CEC_MESSAGE_CLEAR_DIGITAL_TIMER = 0x99,
+    CEC_MESSAGE_SET_AUDIO_RATE = 0x9A,
+    CEC_MESSAGE_INACTIVE_SOURCE = 0x9D,
+    CEC_MESSAGE_CEC_VERSION = 0x9E,
+    CEC_MESSAGE_GET_CEC_VERSION = 0x9F,
+    CEC_MESSAGE_VENDOR_COMMAND_WITH_ID = 0xA0,
+    CEC_MESSAGE_CLEAR_EXTERNAL_TIMER = 0xA1,
+    CEC_MESSAGE_SET_EXTERNAL_TIMER = 0xA2
+};
+
+/*
+ * HDMI event type. used for hdmi_event_t.
+ */
+enum {
+    HDMI_EVENT_CEC_MESSAGE = 1,
+    HDMI_EVENT_HOT_PLUG = 2
+};
+
+/*
+ * HDMI hotplug event type. Used when the event
+ * type is HDMI_EVENT_HOT_PLUG.
+ */
+enum {
+    HDMI_NOT_CONNECTED = 0,
+    HDMI_CONNECTED = 1
+};
+
+/*
+ * Maximum length in bytes of cec message body (exclude header block),
+ * should not exceed 16 (spec CEC 6 Frame Description)
+ */
+#define CEC_MESSAGE_BODY_MAX_LENGTH 16
+
+typedef struct cec_message {
+    /*
+     * logical address of sender
+     */
+    cec_logical_address_t initiator;
+
+    /*
+     * logical address of receiver
+     */
+    cec_logical_address_t destination;
+
+    /*
+     * length in bytes of body, range [0, CEC_MESSAGE_BODY_MAX_LENGTH]
+     */
+    size_t length;
+    unsigned char body[CEC_MESSAGE_BODY_MAX_LENGTH];
+} cec_message_t;
+
+typedef struct hotplug_event {
+    /*
+     * true if the cable is connected; otherwise false.
+     */
+    int connected;
+} hotplug_event_t;
+
+/*
+ * HDMI event generated from HAL.
+ */
+typedef struct hdmi_event {
+    int type;
+    struct hdmi_cec_device* dev;
+    union {
+        cec_message_t cec;
+        hotplug_event_t hotplug;
+    };
+} hdmi_event_t;
+
+/*
+ * Callback function type that will be called by HAL implementation.
+ * Services can not close/open the device in the callback.
+ */
+typedef void (*event_callback_t)(const hdmi_event_t* event);
+
+typedef struct hdmi_cec_module {
+    struct hw_module_t common;
+} hdmi_module_t;
+
+/*
+ * HDMI-CEC HAL interface definition.
+ */
+typedef struct hdmi_cec_device {
+    struct hw_device_t common;
+
+    /*
+     * (*allocate_logical_address)() allocates a new logical address
+     * for a given device type. The address is written to addr. The HAL
+     * implementation is also expected to configure itself to start receiving
+     * the messages addressed to the allocated one. If allocation
+     * is not successful the addr will be set to CEC_ADDR_UNREGISTERED.
+     *
+     * Returns 0 on success or -errno on error.
+     *
+     */
+    int (*allocate_logical_address)(const struct hdmi_cec_device* dev,
+            int device_type, cec_logical_address_t* addr);
+
+    /*
+     * (*get_physical_address)() returns the CEC physical address. The
+     * address is written to addr.
+     *
+     * The physical address depends on the topology of the network formed
+     * by connected HDMI devices. It is therefore likely to change if the cable
+     * is plugged off and on again. It is advised to call get_physical_address
+     * to get the updated address when hot plug event takes place.
+     *
+     * Returns 0 on success or -errno on error.
+     */
+    int (*get_physical_address)(const struct hdmi_cec_device* dev, uint16_t* addr);
+
+    /*
+     * (*send_message)() transmits HDMI-CEC message to other HDMI device.
+     *
+     * Returns 0 on success or -errno on error.
+     */
+    int (*send_message)(const struct hdmi_cec_device* dev,
+            const cec_message_t *);
+
+    /*
+     * (*register_event_callback)() registers a callback that HDMI-CEC HAL
+     * can later use for incoming CEC messages or internal HDMI events.
+     */
+    void (*register_event_callback)(const struct hdmi_cec_device* dev,
+            event_callback_t callback);
+
+    /*
+     * (*get_version)() returns the CEC version supported by underlying
+     * hardware. The version this HAL interface is based on is 0x04,
+     * which corresponds to 1.3a.
+     */
+    void (*get_version)(const struct hdmi_cec_device* dev, int* version);
+
+    /*
+     * (*get_vendor_id)() returns the identifier of the vendor. It is
+     * the 24-bit unique company ID obtained from the IEEE Registration
+     * Authority Committee (RAC).
+     */
+    void (*get_vendor_id)(const struct hdmi_cec_device* dev, uint32_t* vendor_id);
+
+    /* Reserved for future use to maximum 16 functions. Must be NULL. */
+    void* reserved[16 - 6];
+} hdmi_cec_device_t;
+
+/** convenience API for opening and closing a device */
+
+static inline int hdmi_cec_open(const struct hw_module_t* module,
+        struct hdmi_cec_device** device) {
+    return module->methods->open(module,
+            HDMI_CEC_HARDWARE_INTERFACE, (struct hw_device_t**)device);
+}
+
+static inline int hdmi_cec_close(struct hdmi_cec_device* device) {
+    return device->common.close(&device->common);
+}
+
+__END_DECLS
+
+#endif /* ANDROID_INCLUDE_HARDWARE_HDMI_CEC_H */