c_can_pci: generic module for C_CAN/D_CAN on PCI

Signed-off-by: Federico Vaga <federico.vaga@gmail.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Bhupesh Sharma <bhupesh.sharma@st.com>
[mkl: fix call to pci_iounmap]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

3 files changed, 244 insertions, 0 deletions

diff --git a/drivers/net/can/c_can/Kconfig b/drivers/net/can/c_can/Kconfig
index 25d371c..3b83baf 100644
--- a/drivers/net/can/c_can/Kconfig
+++ b/drivers/net/can/c_can/Kconfig
@@ -13,4 +13,11 @@ config CAN_C_CAN_PLATFORM
 	  boards from ST Microelectronics (http://www.st.com) like the
 	  SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
 	  boards like am335x, dm814x, dm813x and dm811x.
+
+config CAN_C_CAN_PCI
+	tristate "Generic PCI Bus based C_CAN/D_CAN driver"
+	depends on PCI
+	---help---
+	  This driver adds support for the C_CAN/D_CAN chips connected
+	  to the PCI bus.
 endif
diff --git a/drivers/net/can/c_can/Makefile b/drivers/net/can/c_can/Makefile
index 9273f6d..ad1cc84 100644
--- a/drivers/net/can/c_can/Makefile
+++ b/drivers/net/can/c_can/Makefile
@@ -4,5 +4,6 @@
 
 obj-$(CONFIG_CAN_C_CAN) += c_can.o
 obj-$(CONFIG_CAN_C_CAN_PLATFORM) += c_can_platform.o
+obj-$(CONFIG_CAN_C_CAN_PCI) += c_can_pci.o
 
 ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c
new file mode 100644
index 0000000..914aecf
--- /dev/null
+++ b/drivers/net/can/c_can/c_can_pci.c
@@ -0,0 +1,236 @@
+/*
+ * PCI bus driver for Bosch C_CAN/D_CAN controller
+ *
+ * Copyright (C) 2012 Federico Vaga <federico.vaga@gmail.com>
+ *
+ * Borrowed from c_can_platform.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/clk.h>
+#include <linux/pci.h>
+
+#include <linux/can/dev.h>
+
+#include "c_can.h"
+
+enum c_can_pci_reg_align {
+	C_CAN_REG_ALIGN_16,
+	C_CAN_REG_ALIGN_32,
+};
+
+struct c_can_pci_data {
+	/* Specify if is C_CAN or D_CAN */
+	enum c_can_dev_id type;
+	/* Set the register alignment in the memory */
+	enum c_can_pci_reg_align reg_align;
+	/* Set the frequency if clk is not usable */
+	unsigned int freq;
+};
+
+/*
+ * 16-bit c_can registers can be arranged differently in the memory
+ * architecture of different implementations. For example: 16-bit
+ * registers can be aligned to a 16-bit boundary or 32-bit boundary etc.
+ * Handle the same by providing a common read/write interface.
+ */
+static u16 c_can_pci_read_reg_aligned_to_16bit(struct c_can_priv *priv,
+						enum reg index)
+{
+	return readw(priv->base + priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_aligned_to_16bit(struct c_can_priv *priv,
+						enum reg index, u16 val)
+{
+	writew(val, priv->base + priv->regs[index]);
+}
+
+static u16 c_can_pci_read_reg_aligned_to_32bit(struct c_can_priv *priv,
+						enum reg index)
+{
+	return readw(priv->base + 2 * priv->regs[index]);
+}
+
+static void c_can_pci_write_reg_aligned_to_32bit(struct c_can_priv *priv,
+						enum reg index, u16 val)
+{
+	writew(val, priv->base + 2 * priv->regs[index]);
+}
+
+static int __devinit c_can_pci_probe(struct pci_dev *pdev,
+				     const struct pci_device_id *ent)
+{
+	struct c_can_pci_data *c_can_pci_data = (void *)ent->driver_data;
+	struct c_can_priv *priv;
+	struct net_device *dev;
+	void __iomem *addr;
+	struct clk *clk;
+	int ret;
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_enable_device FAILED\n");
+		goto out;
+	}
+
+	ret = pci_request_regions(pdev, KBUILD_MODNAME);
+	if (ret) {
+		dev_err(&pdev->dev, "pci_request_regions FAILED\n");
+		goto out_disable_device;
+	}
+
+	pci_set_master(pdev);
+	pci_enable_msi(pdev);
+
+	addr = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
+	if (!addr) {
+		dev_err(&pdev->dev,
+			"device has no PCI memory resources, "
+			"failing adapter\n");
+		ret = -ENOMEM;
+		goto out_release_regions;
+	}
+
+	/* allocate the c_can device */
+	dev = alloc_c_can_dev();
+	if (!dev) {
+		ret = -ENOMEM;
+		goto out_iounmap;
+	}
+
+	priv = netdev_priv(dev);
+	pci_set_drvdata(pdev, dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	dev->irq = pdev->irq;
+	priv->base = addr;
+
+	if (!c_can_pci_data->freq) {
+		/* get the appropriate clk */
+		clk = clk_get(&pdev->dev, NULL);
+		if (IS_ERR(clk)) {
+			dev_err(&pdev->dev, "no clock defined\n");
+			ret = -ENODEV;
+			goto out_free_c_can;
+		}
+		priv->can.clock.freq = clk_get_rate(clk);
+		priv->priv = clk;
+	} else {
+		priv->can.clock.freq = c_can_pci_data->freq;
+		priv->priv = NULL;
+	}
+
+	/* Configure CAN type */
+	switch (c_can_pci_data->type) {
+	case C_CAN_DEVTYPE:
+		priv->regs = reg_map_c_can;
+		break;
+	case D_CAN_DEVTYPE:
+		priv->regs = reg_map_d_can;
+		priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
+		break;
+	default:
+		ret = -EINVAL;
+		goto out_free_clock;
+	}
+
+	/* Configure access to registers */
+	switch (c_can_pci_data->reg_align) {
+	case C_CAN_REG_ALIGN_32:
+		priv->read_reg = c_can_pci_read_reg_aligned_to_32bit;
+		priv->write_reg = c_can_pci_write_reg_aligned_to_32bit;
+		break;
+	case C_CAN_REG_ALIGN_16:
+		priv->read_reg = c_can_pci_read_reg_aligned_to_16bit;
+		priv->write_reg = c_can_pci_write_reg_aligned_to_16bit;
+		break;
+	default:
+		ret = -EINVAL;
+		goto out_free_clock;
+	}
+
+	ret = register_c_can_dev(dev);
+	if (ret) {
+		dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
+			KBUILD_MODNAME, ret);
+		goto out_free_clock;
+	}
+
+	dev_dbg(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
+		 KBUILD_MODNAME, priv->regs, dev->irq);
+
+	return 0;
+
+out_free_clock:
+	if (priv->priv)
+		clk_put(priv->priv);
+out_free_c_can:
+	pci_set_drvdata(pdev, NULL);
+	free_c_can_dev(dev);
+out_iounmap:
+	pci_iounmap(pdev, addr);
+out_release_regions:
+	pci_disable_msi(pdev);
+	pci_clear_master(pdev);
+	pci_release_regions(pdev);
+out_disable_device:
+	pci_disable_device(pdev);
+out:
+	return ret;
+}
+
+static void __devexit c_can_pci_remove(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct c_can_priv *priv = netdev_priv(dev);
+
+	unregister_c_can_dev(dev);
+
+	if (priv->priv)
+		clk_put(priv->priv);
+
+	pci_set_drvdata(pdev, NULL);
+	free_c_can_dev(dev);
+
+	pci_iounmap(pdev, priv->base);
+	pci_disable_msi(pdev);
+	pci_clear_master(pdev);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static struct c_can_pci_data c_can_sta2x11= {
+	.type = C_CAN_DEVTYPE,
+	.reg_align = C_CAN_REG_ALIGN_32,
+	.freq = 52000000, /* 52 Mhz */
+};
+
+#define C_CAN_ID(_vend, _dev, _driverdata) {		\
+	PCI_DEVICE(_vend, _dev),			\
+	.driver_data = (unsigned long)&_driverdata,	\
+}
+static DEFINE_PCI_DEVICE_TABLE(c_can_pci_tbl) = {
+	C_CAN_ID(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_CAN,
+		 c_can_sta2x11),
+	{},
+};
+static struct pci_driver c_can_pci_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = c_can_pci_tbl,
+	.probe = c_can_pci_probe,
+	.remove = __devexit_p(c_can_pci_remove),
+};
+
+module_pci_driver(c_can_pci_driver);
+
+MODULE_AUTHOR("Federico Vaga <federico.vaga@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PCI CAN bus driver for Bosch C_CAN/D_CAN controller");
+MODULE_DEVICE_TABLE(pci, c_can_pci_tbl);