m68k: reformat various m68k files

Reformat various m68k files, so they actually look like Linux sources.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 files changed, 1865 insertions, 1925 deletions

diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 3204f41..c3b69b1 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -22,9 +22,7 @@
 #include <linux/vt_kern.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#ifdef CONFIG_ZORRO
 #include <linux/zorro.h>
-#endif
 
 #include <asm/bootinfo.h>
 #include <asm/setup.h>
@@ -62,21 +60,21 @@ static char s_cdtv[] __initdata = "CDTV";
 static char s_cd32[] __initdata = "CD32";
 static char s_draco[] __initdata = "Draco";
 static char *amiga_models[] __initdata = {
-    [AMI_500-AMI_500]		= s_a500,
-    [AMI_500PLUS-AMI_500]	= s_a500p,
-    [AMI_600-AMI_500]		= s_a600,
-    [AMI_1000-AMI_500]		= s_a1000,
-    [AMI_1200-AMI_500]		= s_a1200,
-    [AMI_2000-AMI_500]		= s_a2000,
-    [AMI_2500-AMI_500]		= s_a2500,
-    [AMI_3000-AMI_500]		= s_a3000,
-    [AMI_3000T-AMI_500]		= s_a3000t,
-    [AMI_3000PLUS-AMI_500]	= s_a3000p,
-    [AMI_4000-AMI_500]		= s_a4000,
-    [AMI_4000T-AMI_500]		= s_a4000t,
-    [AMI_CDTV-AMI_500]		= s_cdtv,
-    [AMI_CD32-AMI_500]		= s_cd32,
-    [AMI_DRACO-AMI_500]		= s_draco,
+	[AMI_500-AMI_500]	= s_a500,
+	[AMI_500PLUS-AMI_500]	= s_a500p,
+	[AMI_600-AMI_500]	= s_a600,
+	[AMI_1000-AMI_500]	= s_a1000,
+	[AMI_1200-AMI_500]	= s_a1200,
+	[AMI_2000-AMI_500]	= s_a2000,
+	[AMI_2500-AMI_500]	= s_a2500,
+	[AMI_3000-AMI_500]	= s_a3000,
+	[AMI_3000T-AMI_500]	= s_a3000t,
+	[AMI_3000PLUS-AMI_500]	= s_a3000p,
+	[AMI_4000-AMI_500]	= s_a4000,
+	[AMI_4000T-AMI_500]	= s_a4000t,
+	[AMI_CDTV-AMI_500]	= s_cdtv,
+	[AMI_CD32-AMI_500]	= s_cd32,
+	[AMI_DRACO-AMI_500]	= s_draco,
 };
 
 static char amiga_model_name[13] = "Amiga ";
@@ -85,17 +83,17 @@ extern char m68k_debug_device[];
 
 static void amiga_sched_init(irq_handler_t handler);
 /* amiga specific irq functions */
-extern void amiga_init_IRQ (void);
+extern void amiga_init_IRQ(void);
 static void amiga_get_model(char *model);
 static int amiga_get_hardware_list(char *buffer);
 /* amiga specific timer functions */
-static unsigned long amiga_gettimeoffset (void);
-static int a3000_hwclk (int, struct rtc_time *);
-static int a2000_hwclk (int, struct rtc_time *);
-static int amiga_set_clock_mmss (unsigned long);
-static unsigned int amiga_get_ss (void);
-extern void amiga_mksound( unsigned int count, unsigned int ticks );
-static void amiga_reset (void);
+static unsigned long amiga_gettimeoffset(void);
+static int a3000_hwclk(int, struct rtc_time *);
+static int a2000_hwclk(int, struct rtc_time *);
+static int amiga_set_clock_mmss(unsigned long);
+static unsigned int amiga_get_ss(void);
+extern void amiga_mksound(unsigned int count, unsigned int ticks);
+static void amiga_reset(void);
 extern void amiga_init_sound(void);
 static void amiga_savekmsg_init(void);
 static void amiga_mem_console_write(struct console *co, const char *b,
@@ -108,9 +106,9 @@ static void amiga_heartbeat(int on);
 #endif
 
 static struct console amiga_console_driver = {
-	.name =		"debug",
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
+	.name	= "debug",
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
 };
 
 
@@ -119,24 +117,24 @@ static struct console amiga_console_driver = {
      */
 
 static struct {
-    struct resource _ciab, _ciaa, _custom, _kickstart;
+	struct resource _ciab, _ciaa, _custom, _kickstart;
 } mb_resources = {
-    ._ciab = {
-	.name = "CIA B", .start = 0x00bfd000, .end = 0x00bfdfff
-    },
-    ._ciaa = {
-	.name = "CIA A", .start = 0x00bfe000, .end = 0x00bfefff
-    },
-    ._custom = {
-	.name = "Custom I/O", .start = 0x00dff000, .end = 0x00dfffff
-    },
-    ._kickstart = {
-	.name = "Kickstart ROM", .start = 0x00f80000, .end = 0x00ffffff
-    }
+	._ciab = {
+		.name = "CIA B", .start = 0x00bfd000, .end = 0x00bfdfff
+	},
+	._ciaa = {
+		.name = "CIA A", .start = 0x00bfe000, .end = 0x00bfefff
+	},
+	._custom = {
+		.name = "Custom I/O", .start = 0x00dff000, .end = 0x00dfffff
+	},
+	._kickstart = {
+		.name = "Kickstart ROM", .start = 0x00f80000, .end = 0x00ffffff
+	}
 };
 
 static struct resource rtc_resource = {
-    .start = 0x00dc0000, .end = 0x00dcffff
+	.start = 0x00dc0000, .end = 0x00dcffff
 };
 
 static struct resource ram_resource[NUM_MEMINFO];
@@ -148,57 +146,57 @@ static struct resource ram_resource[NUM_MEMINFO];
 
 int amiga_parse_bootinfo(const struct bi_record *record)
 {
-    int unknown = 0;
-    const unsigned long *data = record->data;
+	int unknown = 0;
+	const unsigned long *data = record->data;
 
-    switch (record->tag) {
+	switch (record->tag) {
 	case BI_AMIGA_MODEL:
-	    amiga_model = *data;
-	    break;
+		amiga_model = *data;
+		break;
 
 	case BI_AMIGA_ECLOCK:
-	    amiga_eclock = *data;
-	    break;
+		amiga_eclock = *data;
+		break;
 
 	case BI_AMIGA_CHIPSET:
-	    amiga_chipset = *data;
-	    break;
+		amiga_chipset = *data;
+		break;
 
 	case BI_AMIGA_CHIP_SIZE:
-	    amiga_chip_size = *(const int *)data;
-	    break;
+		amiga_chip_size = *(const int *)data;
+		break;
 
 	case BI_AMIGA_VBLANK:
-	    amiga_vblank = *(const unsigned char *)data;
-	    break;
+		amiga_vblank = *(const unsigned char *)data;
+		break;
 
 	case BI_AMIGA_PSFREQ:
-	    amiga_psfreq = *(const unsigned char *)data;
-	    break;
+		amiga_psfreq = *(const unsigned char *)data;
+		break;
 
 	case BI_AMIGA_AUTOCON:
 #ifdef CONFIG_ZORRO
-	    if (zorro_num_autocon < ZORRO_NUM_AUTO) {
-		const struct ConfigDev *cd = (struct ConfigDev *)data;
-		struct zorro_dev *dev = &zorro_autocon[zorro_num_autocon++];
-		dev->rom = cd->cd_Rom;
-		dev->slotaddr = cd->cd_SlotAddr;
-		dev->slotsize = cd->cd_SlotSize;
-		dev->resource.start = (unsigned long)cd->cd_BoardAddr;
-		dev->resource.end = dev->resource.start+cd->cd_BoardSize-1;
-	    } else
-		printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
+		if (zorro_num_autocon < ZORRO_NUM_AUTO) {
+			const struct ConfigDev *cd = (struct ConfigDev *)data;
+			struct zorro_dev *dev = &zorro_autocon[zorro_num_autocon++];
+			dev->rom = cd->cd_Rom;
+			dev->slotaddr = cd->cd_SlotAddr;
+			dev->slotsize = cd->cd_SlotSize;
+			dev->resource.start = (unsigned long)cd->cd_BoardAddr;
+			dev->resource.end = dev->resource.start + cd->cd_BoardSize - 1;
+		} else
+			printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
 #endif /* CONFIG_ZORRO */
-	    break;
+		break;
 
 	case BI_AMIGA_SERPER:
-	    /* serial port period: ignored here */
-	    break;
+		/* serial port period: ignored here */
+		break;
 
 	default:
-	    unknown = 1;
-    }
-    return(unknown);
+		unknown = 1;
+	}
+	return unknown;
 }
 
     /*
@@ -207,159 +205,159 @@ int amiga_parse_bootinfo(const struct bi_record *record)
 
 static void __init amiga_identify(void)
 {
-  /* Fill in some default values, if necessary */
-  if (amiga_eclock == 0)
-    amiga_eclock = 709379;
-
-  memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
-
-  printk("Amiga hardware found: ");
-  if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
-    printk("[%s] ", amiga_models[amiga_model-AMI_500]);
-    strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
-  }
-
-  switch(amiga_model) {
-  case AMI_UNKNOWN:
-    goto Generic;
-
-  case AMI_600:
-  case AMI_1200:
-    AMIGAHW_SET(A1200_IDE);
-    AMIGAHW_SET(PCMCIA);
-  case AMI_500:
-  case AMI_500PLUS:
-  case AMI_1000:
-  case AMI_2000:
-  case AMI_2500:
-    AMIGAHW_SET(A2000_CLK);	/* Is this correct for all models? */
-    goto Generic;
-
-  case AMI_3000:
-  case AMI_3000T:
-    AMIGAHW_SET(AMBER_FF);
-    AMIGAHW_SET(MAGIC_REKICK);
-    /* fall through */
-  case AMI_3000PLUS:
-    AMIGAHW_SET(A3000_SCSI);
-    AMIGAHW_SET(A3000_CLK);
-    AMIGAHW_SET(ZORRO3);
-    goto Generic;
-
-  case AMI_4000T:
-    AMIGAHW_SET(A4000_SCSI);
-    /* fall through */
-  case AMI_4000:
-    AMIGAHW_SET(A4000_IDE);
-    AMIGAHW_SET(A3000_CLK);
-    AMIGAHW_SET(ZORRO3);
-    goto Generic;
-
-  case AMI_CDTV:
-  case AMI_CD32:
-    AMIGAHW_SET(CD_ROM);
-    AMIGAHW_SET(A2000_CLK);             /* Is this correct? */
-    goto Generic;
-
-  Generic:
-    AMIGAHW_SET(AMI_VIDEO);
-    AMIGAHW_SET(AMI_BLITTER);
-    AMIGAHW_SET(AMI_AUDIO);
-    AMIGAHW_SET(AMI_FLOPPY);
-    AMIGAHW_SET(AMI_KEYBOARD);
-    AMIGAHW_SET(AMI_MOUSE);
-    AMIGAHW_SET(AMI_SERIAL);
-    AMIGAHW_SET(AMI_PARALLEL);
-    AMIGAHW_SET(CHIP_RAM);
-    AMIGAHW_SET(PAULA);
-
-    switch(amiga_chipset) {
-    case CS_OCS:
-    case CS_ECS:
-    case CS_AGA:
-      switch (amiga_custom.deniseid & 0xf) {
-      case 0x0c:
-	AMIGAHW_SET(DENISE_HR);
-	break;
-      case 0x08:
-	AMIGAHW_SET(LISA);
-	break;
-      }
-      break;
-    default:
-      AMIGAHW_SET(DENISE);
-      break;
-    }
-    switch ((amiga_custom.vposr>>8) & 0x7f) {
-    case 0x00:
-      AMIGAHW_SET(AGNUS_PAL);
-      break;
-    case 0x10:
-      AMIGAHW_SET(AGNUS_NTSC);
-      break;
-    case 0x20:
-    case 0x21:
-      AMIGAHW_SET(AGNUS_HR_PAL);
-      break;
-    case 0x30:
-    case 0x31:
-      AMIGAHW_SET(AGNUS_HR_NTSC);
-      break;
-    case 0x22:
-    case 0x23:
-      AMIGAHW_SET(ALICE_PAL);
-      break;
-    case 0x32:
-    case 0x33:
-      AMIGAHW_SET(ALICE_NTSC);
-      break;
-    }
-    AMIGAHW_SET(ZORRO);
-    break;
-
-  case AMI_DRACO:
-    panic("No support for Draco yet");
-
-  default:
-    panic("Unknown Amiga Model");
-  }
+	/* Fill in some default values, if necessary */
+	if (amiga_eclock == 0)
+		amiga_eclock = 709379;
 
-#define AMIGAHW_ANNOUNCE(name, str)			\
-  if (AMIGAHW_PRESENT(name))				\
-    printk(str)
-
-  AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
-  AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
-  AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
-  AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
-  AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
-  AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
-  AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
-  AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
-  AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
-  AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
-  AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
-  AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
-  AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
-  AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
-  AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
-  AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
-  AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
-  AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
-  AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
-  AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
-  AMIGAHW_ANNOUNCE(LISA, "LISA ");
-  AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
-  AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
-  AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
-  AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
-  AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
-  AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
-  AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
-  AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
-  if (AMIGAHW_PRESENT(ZORRO))
-    printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
-  printk("\n");
+	memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
+
+	printk("Amiga hardware found: ");
+	if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
+		printk("[%s] ", amiga_models[amiga_model-AMI_500]);
+		strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
+	}
+
+	switch (amiga_model) {
+	case AMI_UNKNOWN:
+		goto Generic;
+
+	case AMI_600:
+	case AMI_1200:
+		AMIGAHW_SET(A1200_IDE);
+		AMIGAHW_SET(PCMCIA);
+	case AMI_500:
+	case AMI_500PLUS:
+	case AMI_1000:
+	case AMI_2000:
+	case AMI_2500:
+		AMIGAHW_SET(A2000_CLK);	/* Is this correct for all models? */
+		goto Generic;
+
+	case AMI_3000:
+	case AMI_3000T:
+		AMIGAHW_SET(AMBER_FF);
+		AMIGAHW_SET(MAGIC_REKICK);
+		/* fall through */
+	case AMI_3000PLUS:
+		AMIGAHW_SET(A3000_SCSI);
+		AMIGAHW_SET(A3000_CLK);
+		AMIGAHW_SET(ZORRO3);
+		goto Generic;
+
+	case AMI_4000T:
+		AMIGAHW_SET(A4000_SCSI);
+		/* fall through */
+	case AMI_4000:
+		AMIGAHW_SET(A4000_IDE);
+		AMIGAHW_SET(A3000_CLK);
+		AMIGAHW_SET(ZORRO3);
+		goto Generic;
+
+	case AMI_CDTV:
+	case AMI_CD32:
+		AMIGAHW_SET(CD_ROM);
+		AMIGAHW_SET(A2000_CLK);             /* Is this correct? */
+		goto Generic;
+
+	Generic:
+		AMIGAHW_SET(AMI_VIDEO);
+		AMIGAHW_SET(AMI_BLITTER);
+		AMIGAHW_SET(AMI_AUDIO);
+		AMIGAHW_SET(AMI_FLOPPY);
+		AMIGAHW_SET(AMI_KEYBOARD);
+		AMIGAHW_SET(AMI_MOUSE);
+		AMIGAHW_SET(AMI_SERIAL);
+		AMIGAHW_SET(AMI_PARALLEL);
+		AMIGAHW_SET(CHIP_RAM);
+		AMIGAHW_SET(PAULA);
+
+		switch (amiga_chipset) {
+		case CS_OCS:
+		case CS_ECS:
+		case CS_AGA:
+			switch (amiga_custom.deniseid & 0xf) {
+			case 0x0c:
+				AMIGAHW_SET(DENISE_HR);
+				break;
+			case 0x08:
+				AMIGAHW_SET(LISA);
+				break;
+			}
+			break;
+		default:
+			AMIGAHW_SET(DENISE);
+			break;
+		}
+		switch ((amiga_custom.vposr>>8) & 0x7f) {
+		case 0x00:
+			AMIGAHW_SET(AGNUS_PAL);
+			break;
+		case 0x10:
+			AMIGAHW_SET(AGNUS_NTSC);
+			break;
+		case 0x20:
+		case 0x21:
+			AMIGAHW_SET(AGNUS_HR_PAL);
+			break;
+		case 0x30:
+		case 0x31:
+			AMIGAHW_SET(AGNUS_HR_NTSC);
+			break;
+		case 0x22:
+		case 0x23:
+			AMIGAHW_SET(ALICE_PAL);
+			break;
+		case 0x32:
+		case 0x33:
+			AMIGAHW_SET(ALICE_NTSC);
+			break;
+		}
+		AMIGAHW_SET(ZORRO);
+		break;
+
+	case AMI_DRACO:
+		panic("No support for Draco yet");
+
+	default:
+		panic("Unknown Amiga Model");
+	}
+
+#define AMIGAHW_ANNOUNCE(name, str)		\
+	if (AMIGAHW_PRESENT(name))		\
+		printk(str)
+
+	AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
+	AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
+	AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
+	AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
+	AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
+	AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
+	AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
+	AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
+	AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
+	AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
+	AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
+	AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
+	AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
+	AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
+	AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
+	AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
+	AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
+	AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
+	AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
+	AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
+	AMIGAHW_ANNOUNCE(LISA, "LISA ");
+	AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
+	AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
+	AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
+	AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
+	AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
+	AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
+	AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
+	AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
+	if (AMIGAHW_PRESENT(ZORRO))
+		printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
+	printk("\n");
 
 #undef AMIGAHW_ANNOUNCE
 }
@@ -370,119 +368,117 @@ static void __init amiga_identify(void)
 
 void __init config_amiga(void)
 {
-  int i;
-
-  amiga_debug_init();
-  amiga_identify();
-
-  /* Yuk, we don't have PCI memory */
-  iomem_resource.name = "Memory";
-  for (i = 0; i < 4; i++)
-    request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
-
-  mach_sched_init      = amiga_sched_init;
-  mach_init_IRQ        = amiga_init_IRQ;
-  mach_get_model       = amiga_get_model;
-  mach_get_hardware_list = amiga_get_hardware_list;
-  mach_gettimeoffset   = amiga_gettimeoffset;
-  if (AMIGAHW_PRESENT(A3000_CLK)){
-    mach_hwclk         = a3000_hwclk;
-    rtc_resource.name = "A3000 RTC";
-    request_resource(&iomem_resource, &rtc_resource);
-  }
-  else{ /* if (AMIGAHW_PRESENT(A2000_CLK)) */
-    mach_hwclk         = a2000_hwclk;
-    rtc_resource.name = "A2000 RTC";
-    request_resource(&iomem_resource, &rtc_resource);
-  }
-
-  mach_max_dma_address = 0xffffffff; /*
-				      * default MAX_DMA=0xffffffff
-				      * on all machines. If we don't
-				      * do so, the SCSI code will not
-				      * be able to allocate any mem
-				      * for transfers, unless we are
-				      * dealing with a Z2 mem only
-				      * system.                  /Jes
-				      */
-
-  mach_set_clock_mmss  = amiga_set_clock_mmss;
-  mach_get_ss          = amiga_get_ss;
-  mach_reset           = amiga_reset;
+	int i;
+
+	amiga_debug_init();
+	amiga_identify();
+
+	/* Yuk, we don't have PCI memory */
+	iomem_resource.name = "Memory";
+	for (i = 0; i < 4; i++)
+		request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
+
+	mach_sched_init      = amiga_sched_init;
+	mach_init_IRQ        = amiga_init_IRQ;
+	mach_get_model       = amiga_get_model;
+	mach_get_hardware_list = amiga_get_hardware_list;
+	mach_gettimeoffset   = amiga_gettimeoffset;
+	if (AMIGAHW_PRESENT(A3000_CLK)) {
+		mach_hwclk         = a3000_hwclk;
+		rtc_resource.name = "A3000 RTC";
+		request_resource(&iomem_resource, &rtc_resource);
+	} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
+		mach_hwclk         = a2000_hwclk;
+		rtc_resource.name = "A2000 RTC";
+		request_resource(&iomem_resource, &rtc_resource);
+	}
+
+	/*
+	 * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
+	 * code will not be able to allocate any mem for transfers, unless we are
+	 * dealing with a Z2 mem only system.                  /Jes
+	 */
+	mach_max_dma_address = 0xffffffff;
+
+	mach_set_clock_mmss  = amiga_set_clock_mmss;
+	mach_get_ss          = amiga_get_ss;
+	mach_reset           = amiga_reset;
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
-  mach_beep            = amiga_mksound;
+	mach_beep            = amiga_mksound;
 #endif
 
 #ifdef CONFIG_HEARTBEAT
-  mach_heartbeat = amiga_heartbeat;
+	mach_heartbeat = amiga_heartbeat;
 #endif
 
-  /* Fill in the clock values (based on the 700 kHz E-Clock) */
-  amiga_masterclock = 40*amiga_eclock;	/* 28 MHz */
-  amiga_colorclock = 5*amiga_eclock;	/* 3.5 MHz */
-
-  /* clear all DMA bits */
-  amiga_custom.dmacon = DMAF_ALL;
-  /* ensure that the DMA master bit is set */
-  amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
-
-  /* don't use Z2 RAM as system memory on Z3 capable machines */
-  if (AMIGAHW_PRESENT(ZORRO3)) {
-    int i, j;
-    u32 disabled_z2mem = 0;
-    for (i = 0; i < m68k_num_memory; i++)
-      if (m68k_memory[i].addr < 16*1024*1024) {
-	if (i == 0) {
-	  /* don't cut off the branch we're sitting on */
-	  printk("Warning: kernel runs in Zorro II memory\n");
-	  continue;
+	/* Fill in the clock values (based on the 700 kHz E-Clock) */
+	amiga_masterclock = 40*amiga_eclock;	/* 28 MHz */
+	amiga_colorclock = 5*amiga_eclock;	/* 3.5 MHz */
+
+	/* clear all DMA bits */
+	amiga_custom.dmacon = DMAF_ALL;
+	/* ensure that the DMA master bit is set */
+	amiga_custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
+
+	/* don't use Z2 RAM as system memory on Z3 capable machines */
+	if (AMIGAHW_PRESENT(ZORRO3)) {
+		int i, j;
+		u32 disabled_z2mem = 0;
+
+		for (i = 0; i < m68k_num_memory; i++) {
+			if (m68k_memory[i].addr < 16*1024*1024) {
+				if (i == 0) {
+					/* don't cut off the branch we're sitting on */
+					printk("Warning: kernel runs in Zorro II memory\n");
+					continue;
+				}
+				disabled_z2mem += m68k_memory[i].size;
+				m68k_num_memory--;
+				for (j = i; j < m68k_num_memory; j++)
+					m68k_memory[j] = m68k_memory[j+1];
+				i--;
+			}
+		}
+		if (disabled_z2mem)
+		printk("%dK of Zorro II memory will not be used as system memory\n",
+		disabled_z2mem>>10);
+	}
+
+	/* request all RAM */
+	for (i = 0; i < m68k_num_memory; i++) {
+		ram_resource[i].name =
+			(m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
+			(m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
+			"16-bit Slow RAM";
+		ram_resource[i].start = m68k_memory[i].addr;
+		ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
+		request_resource(&iomem_resource, &ram_resource[i]);
+	}
+
+	/* initialize chipram allocator */
+	amiga_chip_init();
+
+	/* debugging using chipram */
+	if (!strcmp(m68k_debug_device, "mem")) {
+		if (!AMIGAHW_PRESENT(CHIP_RAM))
+			printk("Warning: no chipram present for debugging\n");
+		else {
+			amiga_savekmsg_init();
+			amiga_console_driver.write = amiga_mem_console_write;
+			register_console(&amiga_console_driver);
+		}
 	}
-	disabled_z2mem += m68k_memory[i].size;
-	m68k_num_memory--;
-	for (j = i; j < m68k_num_memory; j++)
-	  m68k_memory[j] = m68k_memory[j+1];
-	i--;
-      }
-    if (disabled_z2mem)
-      printk("%dK of Zorro II memory will not be used as system memory\n",
-	     disabled_z2mem>>10);
-  }
-
-  /* request all RAM */
-  for (i = 0; i < m68k_num_memory; i++) {
-    ram_resource[i].name =
-      (m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
-      (m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
-      "16-bit Slow RAM";
-    ram_resource[i].start = m68k_memory[i].addr;
-    ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
-    request_resource(&iomem_resource, &ram_resource[i]);
-  }
-
-  /* initialize chipram allocator */
-  amiga_chip_init ();
-
-  /* debugging using chipram */
-  if (!strcmp( m68k_debug_device, "mem" )){
-	  if (!AMIGAHW_PRESENT(CHIP_RAM))
-		  printk("Warning: no chipram present for debugging\n");
-	  else {
-		  amiga_savekmsg_init();
-		  amiga_console_driver.write = amiga_mem_console_write;
-		  register_console(&amiga_console_driver);
-	  }
-  }
-
-  /* our beloved beeper */
-  if (AMIGAHW_PRESENT(AMI_AUDIO))
-	  amiga_init_sound();
-
-  /*
-   * if it is an A3000, set the magic bit that forces
-   * a hard rekick
-   */
-  if (AMIGAHW_PRESENT(MAGIC_REKICK))
-	  *(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
+
+	/* our beloved beeper */
+	if (AMIGAHW_PRESENT(AMI_AUDIO))
+		amiga_init_sound();
+
+	/*
+	 * if it is an A3000, set the magic bit that forces
+	 * a hard rekick
+	 */
+	if (AMIGAHW_PRESENT(MAGIC_REKICK))
+		*(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
 }
 
 static unsigned short jiffy_ticks;
@@ -490,12 +486,12 @@ static unsigned short jiffy_ticks;
 static void __init amiga_sched_init(irq_handler_t timer_routine)
 {
 	static struct resource sched_res = {
-	    .name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
+		.name = "timer", .start = 0x00bfd400, .end = 0x00bfd5ff,
 	};
 	jiffy_ticks = (amiga_eclock+HZ/2)/HZ;
 
 	if (request_resource(&mb_resources._ciab, &sched_res))
-	    printk("Cannot allocate ciab.ta{lo,hi}\n");
+		printk("Cannot allocate ciab.ta{lo,hi}\n");
 	ciab.cra &= 0xC0;   /* turn off timer A, continuous mode, from Eclk */
 	ciab.talo = jiffy_ticks % 256;
 	ciab.tahi = jiffy_ticks / 256;
@@ -513,7 +509,7 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
 #define TICK_SIZE 10000
 
 /* This is always executed with interrupts disabled.  */
-static unsigned long amiga_gettimeoffset (void)
+static unsigned long amiga_gettimeoffset(void)
 {
 	unsigned short hi, lo, hi2;
 	unsigned long ticks, offset = 0;
@@ -585,15 +581,15 @@ static int a2000_hwclk(int op, struct rtc_time *t)
 
 	tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD;
 
-	while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--)
-	{
-	        tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
-	        udelay(70);
-	        tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
+	while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
+		tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
+		udelay(70);
+		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
 	}
 
 	if (!cnt)
-		printk(KERN_INFO "hwclk: timed out waiting for RTC (0x%x)\n", tod_2000.cntrl1);
+		printk(KERN_INFO "hwclk: timed out waiting for RTC (0x%x)\n",
+			tod_2000.cntrl1);
 
 	if (!op) { /* read */
 		t->tm_sec  = tod_2000.second1     * 10 + tod_2000.second2;
@@ -606,7 +602,7 @@ static int a2000_hwclk(int op, struct rtc_time *t)
 		if (t->tm_year <= 69)
 			t->tm_year += 100;
 
-		if (!(tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)){
+		if (!(tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)) {
 			if (!(tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour == 12)
 				t->tm_hour = 0;
 			else if ((tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour != 12)
@@ -642,7 +638,7 @@ static int a2000_hwclk(int op, struct rtc_time *t)
 	return 0;
 }
 
-static int amiga_set_clock_mmss (unsigned long nowtime)
+static int amiga_set_clock_mmss(unsigned long nowtime)
 {
 	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
 
@@ -660,8 +656,7 @@ static int amiga_set_clock_mmss (unsigned long nowtime)
 
 		tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
 
-		while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--)
-		{
+		while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt--) {
 			tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD;
 			udelay(70);
 			tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD;
@@ -681,7 +676,7 @@ static int amiga_set_clock_mmss (unsigned long nowtime)
 	return 0;
 }
 
-static unsigned int amiga_get_ss( void )
+static unsigned int amiga_get_ss(void)
 {
 	unsigned int s;
 
@@ -695,71 +690,72 @@ static unsigned int amiga_get_ss( void )
 	return s;
 }
 
-static NORET_TYPE void amiga_reset( void )
+static NORET_TYPE void amiga_reset(void)
     ATTRIB_NORET;
 
-static void amiga_reset (void)
+static void amiga_reset(void)
 {
-  unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
-  unsigned long jmp_addr = virt_to_phys(&&jmp_addr_label);
-
-  local_irq_disable();
-  if (CPU_IS_040_OR_060)
-    /* Setup transparent translation registers for mapping
-     * of 16 MB kernel segment before disabling translation
-     */
-    __asm__ __volatile__
-      ("movel    %0,%/d0\n\t"
-       "andl     #0xff000000,%/d0\n\t"
-       "orw      #0xe020,%/d0\n\t"   /* map 16 MB, enable, cacheable */
-       ".chip    68040\n\t"
-       "movec    %%d0,%%itt0\n\t"
-       "movec    %%d0,%%dtt0\n\t"
-       ".chip    68k\n\t"
-       "jmp      %0@\n\t"
-       : /* no outputs */
-       : "a" (jmp_addr040));
-  else
-    /* for 680[23]0, just disable translation and jump to the physical
-     * address of the label
-     */
-    __asm__ __volatile__
-      ("pmove  %/tc,%@\n\t"
-       "bclr   #7,%@\n\t"
-       "pmove  %@,%/tc\n\t"
-       "jmp    %0@\n\t"
-       : /* no outputs */
-       : "a" (jmp_addr));
- jmp_addr_label040:
-  /* disable translation on '040 now */
-  __asm__ __volatile__
-    ("moveq #0,%/d0\n\t"
-     ".chip 68040\n\t"
-     "movec %%d0,%%tc\n\t"	/* disable MMU */
-     ".chip 68k\n\t"
-     : /* no outputs */
-     : /* no inputs */
-     : "d0");
-
- jmp_addr_label:
-  /* pickup reset address from AmigaOS ROM, reset devices and jump
-   * to reset address
-   */
-  __asm__ __volatile__
-    ("movew #0x2700,%/sr\n\t"
-     "leal  0x01000000,%/a0\n\t"
-     "subl  %/a0@(-0x14),%/a0\n\t"
-     "movel %/a0@(4),%/a0\n\t"
-     "subql #2,%/a0\n\t"
-     "bra   1f\n\t"
-     /* align on a longword boundary */
-     __ALIGN_STR "\n"
-     "1:\n\t"
-     "reset\n\t"
-     "jmp   %/a0@" : /* Just that gcc scans it for % escapes */ );
-
-  for (;;);
-
+	unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
+	unsigned long jmp_addr = virt_to_phys(&&jmp_addr_label);
+
+	local_irq_disable();
+	if (CPU_IS_040_OR_060)
+		/* Setup transparent translation registers for mapping
+		 * of 16 MB kernel segment before disabling translation
+		 */
+		asm volatile ("\n"
+			"	move.l	%0,%%d0\n"
+			"	and.l	#0xff000000,%%d0\n"
+			"	or.w	#0xe020,%%d0\n"   /* map 16 MB, enable, cacheable */
+			"	.chip	68040\n"
+			"	movec	%%d0,%%itt0\n"
+			"	movec	%%d0,%%dtt0\n"
+			"	.chip	68k\n"
+			"	jmp	%0@\n"
+			: /* no outputs */
+			: "a" (jmp_addr040)
+			: "d0");
+	else
+		/* for 680[23]0, just disable translation and jump to the physical
+		 * address of the label
+		 */
+		asm volatile ("\n"
+			"	pmove	%%tc,%@\n"
+			"	bclr	#7,%@\n"
+			"	pmove	%@,%%tc\n"
+			"	jmp	%0@\n"
+			: /* no outputs */
+			: "a" (jmp_addr));
+jmp_addr_label040:
+	/* disable translation on '040 now */
+	asm volatile ("\n"
+		"	moveq	#0,%%d0\n"
+		"	.chip	68040\n"
+		"	movec	%%d0,%%tc\n"	/* disable MMU */
+		"	.chip	68k\n"
+		: /* no outputs */
+		: /* no inputs */
+		: "d0");
+
+	jmp_addr_label:
+	/* pickup reset address from AmigaOS ROM, reset devices and jump
+	 * to reset address
+	 */
+	asm volatile ("\n"
+		"	move.w	#0x2700,%sr\n"
+		"	lea	0x01000000,%a0\n"
+		"	sub.l	%a0@(-0x14),%a0\n"
+		"	move.l	%a0@(4),%a0\n"
+		"	subq.l	#2,%a0\n"
+		"	jra	1f\n"
+		/* align on a longword boundary */
+		"	" __ALIGN_STR "\n"
+		"1:\n"
+		"	reset\n"
+		"	jmp   %a0@");
+
+	for (;;)
+		;
 }
 
 
@@ -773,11 +769,11 @@ static void amiga_reset (void)
 #define SAVEKMSG_MAGIC2		0x4B4D5347	/* 'KMSG' */
 
 struct savekmsg {
-    unsigned long magic1;		/* SAVEKMSG_MAGIC1 */
-    unsigned long magic2;		/* SAVEKMSG_MAGIC2 */
-    unsigned long magicptr;		/* address of magic1 */
-    unsigned long size;
-    char data[0];
+	unsigned long magic1;		/* SAVEKMSG_MAGIC1 */
+	unsigned long magic2;		/* SAVEKMSG_MAGIC2 */
+	unsigned long magicptr;		/* address of magic1 */
+	unsigned long size;
+	char data[0];
 };
 
 static struct savekmsg *savekmsg;
@@ -785,100 +781,100 @@ static struct savekmsg *savekmsg;
 static void amiga_mem_console_write(struct console *co, const char *s,
 				    unsigned int count)
 {
-    if (savekmsg->size+count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
-        memcpy(savekmsg->data+savekmsg->size, s, count);
-        savekmsg->size += count;
-    }
+	if (savekmsg->size + count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
+		memcpy(savekmsg->data + savekmsg->size, s, count);
+		savekmsg->size += count;
+	}
 }
 
 static void amiga_savekmsg_init(void)
 {
-    static struct resource debug_res = { .name = "Debug" };
+	static struct resource debug_res = { .name = "Debug" };
 
-    savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
-    savekmsg->magic1 = SAVEKMSG_MAGIC1;
-    savekmsg->magic2 = SAVEKMSG_MAGIC2;
-    savekmsg->magicptr = ZTWO_PADDR(savekmsg);
-    savekmsg->size = 0;
+	savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
+	savekmsg->magic1 = SAVEKMSG_MAGIC1;
+	savekmsg->magic2 = SAVEKMSG_MAGIC2;
+	savekmsg->magicptr = ZTWO_PADDR(savekmsg);
+	savekmsg->size = 0;
 }
 
 static void amiga_serial_putc(char c)
 {
-    amiga_custom.serdat = (unsigned char)c | 0x100;
-    while (!(amiga_custom.serdatr & 0x2000))
-	;
+	amiga_custom.serdat = (unsigned char)c | 0x100;
+	while (!(amiga_custom.serdatr & 0x2000))
+		;
 }
 
 void amiga_serial_console_write(struct console *co, const char *s,
-				       unsigned int count)
+				unsigned int count)
 {
-    while (count--) {
-	if (*s == '\n')
-	    amiga_serial_putc('\r');
-	amiga_serial_putc(*s++);
-    }
+	while (count--) {
+		if (*s == '\n')
+			amiga_serial_putc('\r');
+		amiga_serial_putc(*s++);
+	}
 }
 
 #ifdef CONFIG_SERIAL_CONSOLE
 void amiga_serial_puts(const char *s)
 {
-    amiga_serial_console_write(NULL, s, strlen(s));
+	amiga_serial_console_write(NULL, s, strlen(s));
 }
 
 int amiga_serial_console_wait_key(struct console *co)
 {
-    int ch;
-
-    while (!(amiga_custom.intreqr & IF_RBF))
-	barrier();
-    ch = amiga_custom.serdatr & 0xff;
-    /* clear the interrupt, so that another character can be read */
-    amiga_custom.intreq = IF_RBF;
-    return ch;
+	int ch;
+
+	while (!(amiga_custom.intreqr & IF_RBF))
+		barrier();
+	ch = amiga_custom.serdatr & 0xff;
+	/* clear the interrupt, so that another character can be read */
+	amiga_custom.intreq = IF_RBF;
+	return ch;
 }
 
 void amiga_serial_gets(struct console *co, char *s, int len)
 {
-    int ch, cnt = 0;
-
-    while (1) {
-	ch = amiga_serial_console_wait_key(co);
-
-	/* Check for backspace. */
-	if (ch == 8 || ch == 127) {
-	    if (cnt == 0) {
-		amiga_serial_putc('\007');
-		continue;
-	    }
-	    cnt--;
-	    amiga_serial_puts("\010 \010");
-	    continue;
-	}
+	int ch, cnt = 0;
+
+	while (1) {
+		ch = amiga_serial_console_wait_key(co);
+
+		/* Check for backspace. */
+		if (ch == 8 || ch == 127) {
+			if (cnt == 0) {
+				amiga_serial_putc('\007');
+				continue;
+			}
+			cnt--;
+			amiga_serial_puts("\010 \010");
+			continue;
+		}
 
-	/* Check for enter. */
-	if (ch == 10 || ch == 13)
-	    break;
+		/* Check for enter. */
+		if (ch == 10 || ch == 13)
+			break;
 
-	/* See if line is too long. */
-	if (cnt >= len + 1) {
-	    amiga_serial_putc(7);
-	    cnt--;
-	    continue;
-	}
+		/* See if line is too long. */
+		if (cnt >= len + 1) {
+			amiga_serial_putc(7);
+			cnt--;
+			continue;
+		}
 
-	/* Store and echo character. */
-	s[cnt++] = ch;
-	amiga_serial_putc(ch);
-    }
-    /* Print enter. */
-    amiga_serial_puts("\r\n");
-    s[cnt] = 0;
+		/* Store and echo character. */
+		s[cnt++] = ch;
+		amiga_serial_putc(ch);
+	}
+	/* Print enter. */
+	amiga_serial_puts("\r\n");
+	s[cnt] = 0;
 }
 #endif
 
 static void __init amiga_debug_init(void)
 {
-	if (!strcmp( m68k_debug_device, "ser" )) {
+	if (!strcmp(m68k_debug_device, "ser" )) {
 		/* no initialization required (?) */
 		amiga_console_driver.write = amiga_serial_console_write;
 		register_console(&amiga_console_driver);
@@ -888,10 +884,10 @@ static void __init amiga_debug_init(void)
 #ifdef CONFIG_HEARTBEAT
 static void amiga_heartbeat(int on)
 {
-    if (on)
-	ciaa.pra &= ~2;
-    else
-	ciaa.pra |= 2;
+	if (on)
+		ciaa.pra &= ~2;
+	else
+		ciaa.pra |= 2;
 }
 #endif
 
@@ -901,81 +897,81 @@ static void amiga_heartbeat(int on)
 
 static void amiga_get_model(char *model)
 {
-    strcpy(model, amiga_model_name);
+	strcpy(model, amiga_model_name);
 }
 
 
 static int amiga_get_hardware_list(char *buffer)
 {
-    int len = 0;
-
-    if (AMIGAHW_PRESENT(CHIP_RAM))
-	len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
-    len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
-		   amiga_psfreq, amiga_eclock);
-    if (AMIGAHW_PRESENT(AMI_VIDEO)) {
-	char *type;
-	switch(amiga_chipset) {
-	    case CS_OCS:
-		type = "OCS";
-		break;
-	    case CS_ECS:
-		type = "ECS";
-		break;
-	    case CS_AGA:
-		type = "AGA";
-		break;
-	    default:
-		type = "Old or Unknown";
-		break;
+	int len = 0;
+
+	if (AMIGAHW_PRESENT(CHIP_RAM))
+		len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
+	len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
+			amiga_psfreq, amiga_eclock);
+	if (AMIGAHW_PRESENT(AMI_VIDEO)) {
+		char *type;
+		switch (amiga_chipset) {
+		case CS_OCS:
+			type = "OCS";
+			break;
+		case CS_ECS:
+			type = "ECS";
+			break;
+		case CS_AGA:
+			type = "AGA";
+			break;
+		default:
+			type = "Old or Unknown";
+			break;
+		}
+		len += sprintf(buffer+len, "Graphics:\t%s\n", type);
 	}
-	len += sprintf(buffer+len, "Graphics:\t%s\n", type);
-    }
 
 #define AMIGAHW_ANNOUNCE(name, str)			\
-    if (AMIGAHW_PRESENT(name))				\
-	len += sprintf (buffer+len, "\t%s\n", str)
-
-    len += sprintf (buffer + len, "Detected hardware:\n");
-
-    AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
-    AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
-    AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
-    AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
-    AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
-    AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
-    AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
-    AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
-    AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
-    AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
-    AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
-    AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
-    AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
-    AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
-    AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
-    AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
-    AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
-    AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
-    AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
-    AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
-    AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
-    AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
-    AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
-    AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
-    AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
-    AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
-    AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
-    AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
-    AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
+	if (AMIGAHW_PRESENT(name))			\
+		len += sprintf (buffer+len, "\t%s\n", str)
+
+	len += sprintf (buffer + len, "Detected hardware:\n");
+
+	AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
+	AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
+	AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
+	AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
+	AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
+	AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
+	AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
+	AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
+	AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
+	AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
+	AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
+	AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
+	AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
+	AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
+	AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
+	AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
+	AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
+	AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
+	AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
+	AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
+	AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
+	AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
+	AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
+	AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
+	AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
+	AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
+	AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
+	AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
+	AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
 #ifdef CONFIG_ZORRO
-    if (AMIGAHW_PRESENT(ZORRO))
-	len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion "
-				   "Device%s\n",
-		       AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
-		       zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
+	if (AMIGAHW_PRESENT(ZORRO))
+		len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion "
+				"Device%s\n",
+				AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
+				zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
 #endif /* CONFIG_ZORRO */
 
 #undef AMIGAHW_ANNOUNCE
 
-    return(len);
+	return len;
 }
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index ca5cd43..b10e7ad 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -50,19 +50,19 @@ int atari_dont_touch_floppy_select;
 int atari_rtc_year_offset;
 
 /* local function prototypes */
-static void atari_reset( void );
+static void atari_reset(void);
 static void atari_get_model(char *model);
 static int atari_get_hardware_list(char *buffer);
 
 /* atari specific irq functions */
 extern void atari_init_IRQ (void);
-extern void atari_mksound( unsigned int count, unsigned int ticks );
+extern void atari_mksound(unsigned int count, unsigned int ticks);
 #ifdef CONFIG_HEARTBEAT
-static void atari_heartbeat( int on );
+static void atari_heartbeat(int on);
 #endif
 
 /* atari specific timer functions (in time.c) */
-extern void atari_sched_init(irq_handler_t );
+extern void atari_sched_init(irq_handler_t);
 extern unsigned long atari_gettimeoffset (void);
 extern int atari_mste_hwclk (int, struct rtc_time *);
 extern int atari_tt_hwclk (int, struct rtc_time *);
@@ -73,48 +73,6 @@ extern int atari_tt_set_clock_mmss (unsigned long);
 extern void atari_debug_init(void);
 
 
-/* I've moved hwreg_present() and hwreg_present_bywrite() out into
- * mm/hwtest.c, to avoid having multiple copies of the same routine
- * in the kernel [I wanted them in hp300 and they were already used
- * in the nubus code. NB: I don't have an Atari so this might (just
- * conceivably) break something.
- * I've preserved the #if 0 version of hwreg_present_bywrite() here
- * for posterity.
- *   -- Peter Maydell <pmaydell@chiark.greenend.org.uk>, 05/1998
- */
-
-#if 0
-static int __init
-hwreg_present_bywrite(volatile void *regp, unsigned char val)
-{
-    int		ret;
-    long	save_sp, save_vbr;
-    static long tmp_vectors[3] = { [2] = (long)&&after_test };
-
-    __asm__ __volatile__
-	(	"movec	%/vbr,%2\n\t"	/* save vbr value            */
-                "movec	%4,%/vbr\n\t"	/* set up temporary vectors  */
-		"movel	%/sp,%1\n\t"	/* save sp                   */
-		"moveq	#0,%0\n\t"	/* assume not present        */
-		"moveb	%5,%3@\n\t"	/* write the hardware reg    */
-		"cmpb	%3@,%5\n\t"	/* compare it                */
-		"seq	%0"		/* comes here only if reg    */
-                                        /* is present                */
-		: "=d&" (ret), "=r&" (save_sp), "=r&" (save_vbr)
-		: "a" (regp), "r" (tmp_vectors), "d" (val)
-                );
-  after_test:
-    __asm__ __volatile__
-      (	"movel	%0,%/sp\n\t"		/* restore sp                */
-        "movec	%1,%/vbr"			/* restore vbr               */
-        : : "r" (save_sp), "r" (save_vbr) : "sp"
-	);
-
-    return( ret );
-}
-#endif
-
-
 /* ++roman: This is a more elaborate test for an SCC chip, since the plain
  * Medusa board generates DTACK at the SCC's standard addresses, but a SCC
  * board in the Medusa is possible. Also, the addresses where the ST_ESCC
@@ -123,26 +81,34 @@ hwreg_present_bywrite(volatile void *regp, unsigned char val)
  * should be readable without trouble (from channel A!).
  */
 
-static int __init scc_test( volatile char *ctla )
+static int __init scc_test(volatile char *ctla)
 {
-	if (!hwreg_present( ctla ))
-		return( 0 );
+	if (!hwreg_present(ctla))
+		return 0;
 	MFPDELAY();
 
-	*ctla = 2; MFPDELAY();
-	*ctla = 0x40; MFPDELAY();
+	*ctla = 2;
+	MFPDELAY();
+	*ctla = 0x40;
+	MFPDELAY();
 
-	*ctla = 2; MFPDELAY();
-	if (*ctla != 0x40) return( 0 );
+	*ctla = 2;
+	MFPDELAY();
+	if (*ctla != 0x40)
+		return 0;
 	MFPDELAY();
 
-	*ctla = 2; MFPDELAY();
-	*ctla = 0x60; MFPDELAY();
+	*ctla = 2;
+	MFPDELAY();
+	*ctla = 0x60;
+	MFPDELAY();
 
-	*ctla = 2; MFPDELAY();
-	if (*ctla != 0x60) return( 0 );
+	*ctla = 2;
+	MFPDELAY();
+	if (*ctla != 0x60)
+		return 0;
 
-	return( 1 );
+	return 1;
 }
 
 
@@ -152,59 +118,58 @@ static int __init scc_test( volatile char *ctla )
 
 int __init atari_parse_bootinfo(const struct bi_record *record)
 {
-    int unknown = 0;
-    const u_long *data = record->data;
+	int unknown = 0;
+	const u_long *data = record->data;
 
-    switch (record->tag) {
+	switch (record->tag) {
 	case BI_ATARI_MCH_COOKIE:
-	    atari_mch_cookie = *data;
-	    break;
+		atari_mch_cookie = *data;
+		break;
 	case BI_ATARI_MCH_TYPE:
-	    atari_mch_type = *data;
-	    break;
+		atari_mch_type = *data;
+		break;
 	default:
-	    unknown = 1;
-    }
-    return(unknown);
+		unknown = 1;
+		break;
+	}
+	return unknown;
 }
 
 
 /* Parse the Atari-specific switches= option. */
-void __init atari_switches_setup( const char *str, unsigned len )
+void __init atari_switches_setup(const char *str, unsigned len)
 {
-    char switches[len+1];
-    char *p;
-    int ovsc_shift;
-    char *args = switches;
-
-    /* copy string to local array, strsep works destructively... */
-    strlcpy( switches, str, sizeof(switches) );
-    atari_switches = 0;
-
-    /* parse the options */
-    while ((p = strsep(&args, ",")) != NULL) {
-	if (!*p) continue;
-	ovsc_shift = 0;
-	if (strncmp( p, "ov_", 3 ) == 0) {
-	    p += 3;
-	    ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
-	}
-
-	if (strcmp( p, "ikbd" ) == 0) {
-	    /* RTS line of IKBD ACIA */
-	    atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
-	}
-	else if (strcmp( p, "midi" ) == 0) {
-	    /* RTS line of MIDI ACIA */
-	    atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
+	char switches[len+1];
+	char *p;
+	int ovsc_shift;
+	char *args = switches;
+
+	/* copy string to local array, strsep works destructively... */
+	strlcpy(switches, str, sizeof(switches));
+	atari_switches = 0;
+
+	/* parse the options */
+	while ((p = strsep(&args, ",")) != NULL) {
+		if (!*p)
+			continue;
+		ovsc_shift = 0;
+		if (strncmp(p, "ov_", 3) == 0) {
+			p += 3;
+			ovsc_shift = ATARI_SWITCH_OVSC_SHIFT;
+		}
+
+		if (strcmp(p, "ikbd") == 0) {
+			/* RTS line of IKBD ACIA */
+			atari_switches |= ATARI_SWITCH_IKBD << ovsc_shift;
+		} else if (strcmp(p, "midi") == 0) {
+			/* RTS line of MIDI ACIA */
+			atari_switches |= ATARI_SWITCH_MIDI << ovsc_shift;
+		} else if (strcmp(p, "snd6") == 0) {
+			atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
+		} else if (strcmp(p, "snd7") == 0) {
+			atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
+		}
 	}
-	else if (strcmp( p, "snd6" ) == 0) {
-	    atari_switches |= ATARI_SWITCH_SND6 << ovsc_shift;
-	}
-	else if (strcmp( p, "snd7" ) == 0) {
-	    atari_switches |= ATARI_SWITCH_SND7 << ovsc_shift;
-	}
-    }
 }
 
 
@@ -214,284 +179,283 @@ void __init atari_switches_setup( const char *str, unsigned len )
 
 void __init config_atari(void)
 {
-    unsigned short tos_version;
+	unsigned short tos_version;
 
-    memset(&atari_hw_present, 0, sizeof(atari_hw_present));
+	memset(&atari_hw_present, 0, sizeof(atari_hw_present));
 
-    atari_debug_init();
+	atari_debug_init();
 
-    ioport_resource.end  = 0xFFFFFFFF;  /* Change size of I/O space from 64KB
-                                           to 4GB. */
+	/* Change size of I/O space from 64KB to 4GB. */
+	ioport_resource.end  = 0xFFFFFFFF;
 
-    mach_sched_init      = atari_sched_init;
-    mach_init_IRQ        = atari_init_IRQ;
-    mach_get_model	 = atari_get_model;
-    mach_get_hardware_list = atari_get_hardware_list;
-    mach_gettimeoffset   = atari_gettimeoffset;
-    mach_reset           = atari_reset;
-    mach_max_dma_address = 0xffffff;
+	mach_sched_init      = atari_sched_init;
+	mach_init_IRQ        = atari_init_IRQ;
+	mach_get_model	 = atari_get_model;
+	mach_get_hardware_list = atari_get_hardware_list;
+	mach_gettimeoffset   = atari_gettimeoffset;
+	mach_reset           = atari_reset;
+	mach_max_dma_address = 0xffffff;
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
-    mach_beep          = atari_mksound;
+	mach_beep          = atari_mksound;
 #endif
 #ifdef CONFIG_HEARTBEAT
-    mach_heartbeat = atari_heartbeat;
+	mach_heartbeat = atari_heartbeat;
 #endif
 
-    /* Set switches as requested by the user */
-    if (atari_switches & ATARI_SWITCH_IKBD)
-	acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
-    if (atari_switches & ATARI_SWITCH_MIDI)
-	acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
-    if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
-	sound_ym.rd_data_reg_sel = 14;
-	sound_ym.wd_data = sound_ym.rd_data_reg_sel |
-			   ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
-			   ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
-    }
-
-    /* ++bjoern:
-     * Determine hardware present
-     */
+	/* Set switches as requested by the user */
+	if (atari_switches & ATARI_SWITCH_IKBD)
+		acia.key_ctrl = ACIA_DIV64 | ACIA_D8N1S | ACIA_RHTID;
+	if (atari_switches & ATARI_SWITCH_MIDI)
+		acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S | ACIA_RHTID;
+	if (atari_switches & (ATARI_SWITCH_SND6|ATARI_SWITCH_SND7)) {
+		sound_ym.rd_data_reg_sel = 14;
+		sound_ym.wd_data = sound_ym.rd_data_reg_sel |
+				   ((atari_switches&ATARI_SWITCH_SND6) ? 0x40 : 0) |
+				   ((atari_switches&ATARI_SWITCH_SND7) ? 0x80 : 0);
+	}
 
-    printk( "Atari hardware found: " );
-    if (MACH_IS_MEDUSA || MACH_IS_HADES) {
-        /* There's no Atari video hardware on the Medusa, but all the
-         * addresses below generate a DTACK so no bus error occurs! */
-    }
-    else if (hwreg_present( f030_xreg )) {
-	ATARIHW_SET(VIDEL_SHIFTER);
-        printk( "VIDEL " );
-        /* This is a temporary hack: If there is Falcon video
-         * hardware, we assume that the ST-DMA serves SCSI instead of
-         * ACSI. In the future, there should be a better method for
-         * this...
-         */
-	ATARIHW_SET(ST_SCSI);
-        printk( "STDMA-SCSI " );
-    }
-    else if (hwreg_present( tt_palette )) {
-	ATARIHW_SET(TT_SHIFTER);
-        printk( "TT_SHIFTER " );
-    }
-    else if (hwreg_present( &shifter.bas_hi )) {
-        if (hwreg_present( &shifter.bas_lo ) &&
-	    (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
-	    ATARIHW_SET(EXTD_SHIFTER);
-            printk( "EXTD_SHIFTER " );
-        }
-        else {
-	    ATARIHW_SET(STND_SHIFTER);
-            printk( "STND_SHIFTER " );
-        }
-    }
-    if (hwreg_present( &mfp.par_dt_reg )) {
-	ATARIHW_SET(ST_MFP);
-        printk( "ST_MFP " );
-    }
-    if (hwreg_present( &tt_mfp.par_dt_reg )) {
-	ATARIHW_SET(TT_MFP);
-        printk( "TT_MFP " );
-    }
-    if (hwreg_present( &tt_scsi_dma.dma_addr_hi )) {
-	ATARIHW_SET(SCSI_DMA);
-        printk( "TT_SCSI_DMA " );
-    }
-    if (!MACH_IS_HADES && hwreg_present( &st_dma.dma_hi )) {
-	ATARIHW_SET(STND_DMA);
-        printk( "STND_DMA " );
-    }
-    if (MACH_IS_MEDUSA || /* The ST-DMA address registers aren't readable
-			   * on all Medusas, so the test below may fail */
-        (hwreg_present( &st_dma.dma_vhi ) &&
-         (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
-         st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
-         (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
-         st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
-	ATARIHW_SET(EXTD_DMA);
-        printk( "EXTD_DMA " );
-    }
-    if (hwreg_present( &tt_scsi.scsi_data )) {
-	ATARIHW_SET(TT_SCSI);
-        printk( "TT_SCSI " );
-    }
-    if (hwreg_present( &sound_ym.rd_data_reg_sel )) {
-	ATARIHW_SET(YM_2149);
-        printk( "YM2149 " );
-    }
-    if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
-	hwreg_present( &tt_dmasnd.ctrl )) {
-	ATARIHW_SET(PCM_8BIT);
-        printk( "PCM " );
-    }
-    if (!MACH_IS_HADES && hwreg_present( &falcon_codec.unused5 )) {
-	ATARIHW_SET(CODEC);
-        printk( "CODEC " );
-    }
-    if (hwreg_present( &dsp56k_host_interface.icr )) {
-	ATARIHW_SET(DSP56K);
-        printk( "DSP56K " );
-    }
-    if (hwreg_present( &tt_scc_dma.dma_ctrl ) &&
+	/* ++bjoern:
+	 * Determine hardware present
+	 */
+
+	printk("Atari hardware found: ");
+	if (MACH_IS_MEDUSA || MACH_IS_HADES) {
+		/* There's no Atari video hardware on the Medusa, but all the
+		 * addresses below generate a DTACK so no bus error occurs! */
+	} else if (hwreg_present(f030_xreg)) {
+		ATARIHW_SET(VIDEL_SHIFTER);
+		printk("VIDEL ");
+		/* This is a temporary hack: If there is Falcon video
+		 * hardware, we assume that the ST-DMA serves SCSI instead of
+		 * ACSI. In the future, there should be a better method for
+		 * this...
+		 */
+		ATARIHW_SET(ST_SCSI);
+		printk("STDMA-SCSI ");
+	} else if (hwreg_present(tt_palette)) {
+		ATARIHW_SET(TT_SHIFTER);
+		printk("TT_SHIFTER ");
+	} else if (hwreg_present(&shifter.bas_hi)) {
+		if (hwreg_present(&shifter.bas_lo) &&
+		    (shifter.bas_lo = 0x0aau, shifter.bas_lo == 0x0aau)) {
+			ATARIHW_SET(EXTD_SHIFTER);
+			printk("EXTD_SHIFTER ");
+		} else {
+			ATARIHW_SET(STND_SHIFTER);
+			printk("STND_SHIFTER ");
+		}
+	}
+	if (hwreg_present(&mfp.par_dt_reg)) {
+		ATARIHW_SET(ST_MFP);
+		printk("ST_MFP ");
+	}
+	if (hwreg_present(&tt_mfp.par_dt_reg)) {
+		ATARIHW_SET(TT_MFP);
+		printk("TT_MFP ");
+	}
+	if (hwreg_present(&tt_scsi_dma.dma_addr_hi)) {
+		ATARIHW_SET(SCSI_DMA);
+		printk("TT_SCSI_DMA ");
+	}
+	if (!MACH_IS_HADES && hwreg_present(&st_dma.dma_hi)) {
+		ATARIHW_SET(STND_DMA);
+		printk("STND_DMA ");
+	}
+	/*
+	 * The ST-DMA address registers aren't readable
+	 * on all Medusas, so the test below may fail
+	 */
+	if (MACH_IS_MEDUSA ||
+	    (hwreg_present(&st_dma.dma_vhi) &&
+	     (st_dma.dma_vhi = 0x55) && (st_dma.dma_hi = 0xaa) &&
+	     st_dma.dma_vhi == 0x55 && st_dma.dma_hi == 0xaa &&
+	     (st_dma.dma_vhi = 0xaa) && (st_dma.dma_hi = 0x55) &&
+	     st_dma.dma_vhi == 0xaa && st_dma.dma_hi == 0x55)) {
+		ATARIHW_SET(EXTD_DMA);
+		printk("EXTD_DMA ");
+	}
+	if (hwreg_present(&tt_scsi.scsi_data)) {
+		ATARIHW_SET(TT_SCSI);
+		printk("TT_SCSI ");
+	}
+	if (hwreg_present(&sound_ym.rd_data_reg_sel)) {
+		ATARIHW_SET(YM_2149);
+		printk("YM2149 ");
+	}
+	if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
+		hwreg_present(&tt_dmasnd.ctrl)) {
+		ATARIHW_SET(PCM_8BIT);
+		printk("PCM ");
+	}
+	if (!MACH_IS_HADES && hwreg_present(&falcon_codec.unused5)) {
+		ATARIHW_SET(CODEC);
+		printk("CODEC ");
+	}
+	if (hwreg_present(&dsp56k_host_interface.icr)) {
+		ATARIHW_SET(DSP56K);
+		printk("DSP56K ");
+	}
+	if (hwreg_present(&tt_scc_dma.dma_ctrl) &&
 #if 0
-	/* This test sucks! Who knows some better? */
-	(tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
-	(tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
+	    /* This test sucks! Who knows some better? */
+	    (tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
+	    (tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
 #else
-	!MACH_IS_MEDUSA && !MACH_IS_HADES
+	    !MACH_IS_MEDUSA && !MACH_IS_HADES
 #endif
-	) {
-	ATARIHW_SET(SCC_DMA);
-        printk( "SCC_DMA " );
-    }
-    if (scc_test( &scc.cha_a_ctrl )) {
-	ATARIHW_SET(SCC);
-        printk( "SCC " );
-    }
-    if (scc_test( &st_escc.cha_b_ctrl )) {
-	ATARIHW_SET( ST_ESCC );
-	printk( "ST_ESCC " );
-    }
-    if (MACH_IS_HADES)
-    {
-        ATARIHW_SET( VME );
-        printk( "VME " );
-    }
-    else if (hwreg_present( &tt_scu.sys_mask )) {
-	ATARIHW_SET(SCU);
-	/* Assume a VME bus if there's a SCU */
-	ATARIHW_SET( VME );
-        printk( "VME SCU " );
-    }
-    if (hwreg_present( (void *)(0xffff9210) )) {
-	ATARIHW_SET(ANALOG_JOY);
-        printk( "ANALOG_JOY " );
-    }
-    if (!MACH_IS_HADES && hwreg_present( blitter.halftone )) {
-	ATARIHW_SET(BLITTER);
-        printk( "BLITTER " );
-    }
-    if (hwreg_present((void *)0xfff00039)) {
-	ATARIHW_SET(IDE);
-        printk( "IDE " );
-    }
+	    ) {
+		ATARIHW_SET(SCC_DMA);
+		printk("SCC_DMA ");
+	}
+	if (scc_test(&scc.cha_a_ctrl)) {
+		ATARIHW_SET(SCC);
+		printk("SCC ");
+	}
+	if (scc_test(&st_escc.cha_b_ctrl)) {
+		ATARIHW_SET(ST_ESCC);
+		printk("ST_ESCC ");
+	}
+	if (MACH_IS_HADES) {
+		ATARIHW_SET(VME);
+		printk("VME ");
+	} else if (hwreg_present(&tt_scu.sys_mask)) {
+		ATARIHW_SET(SCU);
+		/* Assume a VME bus if there's a SCU */
+		ATARIHW_SET(VME);
+		printk("VME SCU ");
+	}
+	if (hwreg_present((void *)(0xffff9210))) {
+		ATARIHW_SET(ANALOG_JOY);
+		printk("ANALOG_JOY ");
+	}
+	if (!MACH_IS_HADES && hwreg_present(blitter.halftone)) {
+		ATARIHW_SET(BLITTER);
+		printk("BLITTER ");
+	}
+	if (hwreg_present((void *)0xfff00039)) {
+		ATARIHW_SET(IDE);
+		printk("IDE ");
+	}
 #if 1 /* This maybe wrong */
-    if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
-	hwreg_present( &tt_microwire.data ) &&
-	hwreg_present( &tt_microwire.mask ) &&
-	(tt_microwire.mask = 0x7ff,
-	 udelay(1),
-	 tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
-	 udelay(1),
-	 tt_microwire.data != 0)) {
-	ATARIHW_SET(MICROWIRE);
-	while (tt_microwire.mask != 0x7ff) ;
-        printk( "MICROWIRE " );
-    }
+	if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
+	    hwreg_present(&tt_microwire.data) &&
+	    hwreg_present(&tt_microwire.mask) &&
+	    (tt_microwire.mask = 0x7ff,
+	     udelay(1),
+	     tt_microwire.data = MW_LM1992_PSG_HIGH | MW_LM1992_ADDR,
+	     udelay(1),
+	     tt_microwire.data != 0)) {
+		ATARIHW_SET(MICROWIRE);
+		while (tt_microwire.mask != 0x7ff)
+			;
+		printk("MICROWIRE ");
+	}
 #endif
-    if (hwreg_present( &tt_rtc.regsel )) {
-	ATARIHW_SET(TT_CLK);
-        printk( "TT_CLK " );
-        mach_hwclk = atari_tt_hwclk;
-        mach_set_clock_mmss = atari_tt_set_clock_mmss;
-    }
-    if (!MACH_IS_HADES && hwreg_present( &mste_rtc.sec_ones)) {
-	ATARIHW_SET(MSTE_CLK);
-        printk( "MSTE_CLK ");
-        mach_hwclk = atari_mste_hwclk;
-        mach_set_clock_mmss = atari_mste_set_clock_mmss;
-    }
-    if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
-	hwreg_present( &dma_wd.fdc_speed ) &&
-	hwreg_write( &dma_wd.fdc_speed, 0 )) {
-	    ATARIHW_SET(FDCSPEED);
-	    printk( "FDC_SPEED ");
-    }
-    if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) {
-	ATARIHW_SET(ACSI);
-        printk( "ACSI " );
-    }
-    printk("\n");
-
-    if (CPU_IS_040_OR_060)
-        /* Now it seems to be safe to turn of the tt0 transparent
-         * translation (the one that must not be turned off in
-         * head.S...)
-         */
-        __asm__ volatile ("moveq #0,%/d0\n\t"
-                          ".chip 68040\n\t"
-			  "movec %%d0,%%itt0\n\t"
-			  "movec %%d0,%%dtt0\n\t"
-			  ".chip 68k"
-						  : /* no outputs */
-						  : /* no inputs */
-						  : "d0");
-
-    /* allocator for memory that must reside in st-ram */
-    atari_stram_init ();
-
-    /* Set up a mapping for the VMEbus address region:
-     *
-     * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
-     * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
-     * 0xfe000000 virt., because this can be done with a single
-     * transparent translation. On the 68040, lots of often unused
-     * page tables would be needed otherwise. On a MegaSTE or similar,
-     * the highest byte is stripped off by hardware due to the 24 bit
-     * design of the bus.
-     */
+	if (hwreg_present(&tt_rtc.regsel)) {
+		ATARIHW_SET(TT_CLK);
+		printk("TT_CLK ");
+		mach_hwclk = atari_tt_hwclk;
+		mach_set_clock_mmss = atari_tt_set_clock_mmss;
+	}
+	if (!MACH_IS_HADES && hwreg_present(&mste_rtc.sec_ones)) {
+		ATARIHW_SET(MSTE_CLK);
+		printk("MSTE_CLK ");
+		mach_hwclk = atari_mste_hwclk;
+		mach_set_clock_mmss = atari_mste_set_clock_mmss;
+	}
+	if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
+	    hwreg_present(&dma_wd.fdc_speed) &&
+	    hwreg_write(&dma_wd.fdc_speed, 0)) {
+		ATARIHW_SET(FDCSPEED);
+		printk("FDC_SPEED ");
+	}
+	if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) {
+		ATARIHW_SET(ACSI);
+		printk("ACSI ");
+	}
+	printk("\n");
+
+	if (CPU_IS_040_OR_060)
+		/* Now it seems to be safe to turn of the tt0 transparent
+		 * translation (the one that must not be turned off in
+		 * head.S...)
+		 */
+		asm volatile ("\n"
+			"	moveq	#0,%%d0\n"
+			"	.chip	68040\n"
+			"	movec	%%d0,%%itt0\n"
+			"	movec	%%d0,%%dtt0\n"
+			"	.chip	68k"
+			: /* no outputs */
+			: /* no inputs */
+			: "d0");
+
+	/* allocator for memory that must reside in st-ram */
+	atari_stram_init();
+
+	/* Set up a mapping for the VMEbus address region:
+	 *
+	 * VME is either at phys. 0xfexxxxxx (TT) or 0xa00000..0xdfffff
+	 * (MegaSTE) In both cases, the whole 16 MB chunk is mapped at
+	 * 0xfe000000 virt., because this can be done with a single
+	 * transparent translation. On the 68040, lots of often unused
+	 * page tables would be needed otherwise. On a MegaSTE or similar,
+	 * the highest byte is stripped off by hardware due to the 24 bit
+	 * design of the bus.
+	 */
+
+	if (CPU_IS_020_OR_030) {
+		unsigned long tt1_val;
+		tt1_val = 0xfe008543;	/* Translate 0xfexxxxxx, enable, cache
+					 * inhibit, read and write, FDC mask = 3,
+					 * FDC val = 4 -> Supervisor only */
+		asm volatile ("\n"
+			"	.chip	68030\n"
+			"	pmove	%0@,%/tt1\n"
+			"	.chip	68k"
+			: : "a" (&tt1_val));
+	} else {
+	        asm volatile ("\n"
+			"	.chip	68040\n"
+			"	movec	%0,%%itt1\n"
+			"	movec	%0,%%dtt1\n"
+			"	.chip	68k"
+			:
+			: "d" (0xfe00a040));	/* Translate 0xfexxxxxx, enable,
+						 * supervisor only, non-cacheable/
+						 * serialized, writable */
+
+	}
 
-    if (CPU_IS_020_OR_030) {
-        unsigned long	tt1_val;
-        tt1_val = 0xfe008543;	/* Translate 0xfexxxxxx, enable, cache
-                                 * inhibit, read and write, FDC mask = 3,
-                                 * FDC val = 4 -> Supervisor only */
-        __asm__ __volatile__ ( ".chip 68030\n\t"
-				"pmove	%0@,%/tt1\n\t"
-				".chip 68k"
-				: : "a" (&tt1_val) );
-    }
-    else {
-        __asm__ __volatile__
-            ( "movel %0,%/d0\n\t"
-	      ".chip 68040\n\t"
-	      "movec %%d0,%%itt1\n\t"
-	      "movec %%d0,%%dtt1\n\t"
-	      ".chip 68k"
-              :
-              : "g" (0xfe00a040)	/* Translate 0xfexxxxxx, enable,
-                                         * supervisor only, non-cacheable/
-                                         * serialized, writable */
-              : "d0" );
-
-    }
-
-    /* Fetch tos version at Physical 2 */
-    /* We my not be able to access this address if the kernel is
-       loaded to st ram, since the first page is unmapped.  On the
-       Medusa this is always the case and there is nothing we can do
-       about this, so we just assume the smaller offset.  For the TT
-       we use the fact that in head.S we have set up a mapping
-       0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
-       in the last 16MB of the address space. */
-    tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ?
-		  0xfff : *(unsigned short *)0xff000002;
-    atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
+	/* Fetch tos version at Physical 2 */
+	/*
+	 * We my not be able to access this address if the kernel is
+	 * loaded to st ram, since the first page is unmapped.  On the
+	 * Medusa this is always the case and there is nothing we can do
+	 * about this, so we just assume the smaller offset.  For the TT
+	 * we use the fact that in head.S we have set up a mapping
+	 * 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
+	 * in the last 16MB of the address space.
+	 */
+	tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ?
+			0xfff : *(unsigned short *)0xff000002;
+	atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
 }
 
 #ifdef CONFIG_HEARTBEAT
-static void atari_heartbeat( int on )
+static void atari_heartbeat(int on)
 {
-    unsigned char tmp;
-    unsigned long flags;
+	unsigned char tmp;
+	unsigned long flags;
 
-    if (atari_dont_touch_floppy_select)
-	return;
+	if (atari_dont_touch_floppy_select)
+		return;
 
-    local_irq_save(flags);
-    sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
-    tmp = sound_ym.rd_data_reg_sel;
-    sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
-    local_irq_restore(flags);
+	local_irq_save(flags);
+	sound_ym.rd_data_reg_sel = 14;	/* Select PSG Port A */
+	tmp = sound_ym.rd_data_reg_sel;
+	sound_ym.wd_data = on ? (tmp & ~0x02) : (tmp | 0x02);
+	local_irq_restore(flags);
 }
 #endif
 
@@ -526,180 +490,171 @@ static void atari_heartbeat( int on )
 
 /* ++andreas: no need for complicated code, just depend on prefetch */
 
-static void atari_reset (void)
+static void atari_reset(void)
 {
-    long tc_val = 0;
-    long reset_addr;
-
-    /* On the Medusa, phys. 0x4 may contain garbage because it's no
-       ROM.  See above for explanation why we cannot use PTOV(4). */
-    reset_addr = MACH_IS_HADES ? 0x7fe00030 :
-                 MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
-		 *(unsigned long *) 0xff000004;
-
-    /* reset ACIA for switch off OverScan, if it's active */
-    if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
-	acia.key_ctrl = ACIA_RESET;
-    if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
-	acia.mid_ctrl = ACIA_RESET;
-
-    /* processor independent: turn off interrupts and reset the VBR;
-     * the caches must be left enabled, else prefetching the final jump
-     * instruction doesn't work. */
-    local_irq_disable();
-    __asm__ __volatile__
-	("moveq	#0,%/d0\n\t"
-	 "movec	%/d0,%/vbr"
-	 : : : "d0" );
-
-    if (CPU_IS_040_OR_060) {
-        unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
-	if (CPU_IS_060) {
-	    /* 68060: clear PCR to turn off superscalar operation */
-	    __asm__ __volatile__
-		("moveq	#0,%/d0\n\t"
-		 ".chip 68060\n\t"
-		 "movec %%d0,%%pcr\n\t"
-		 ".chip 68k"
-		 : : : "d0" );
-	}
-
-        __asm__ __volatile__
-            ("movel    %0,%/d0\n\t"
-             "andl     #0xff000000,%/d0\n\t"
-             "orw      #0xe020,%/d0\n\t"   /* map 16 MB, enable, cacheable */
-             ".chip 68040\n\t"
-	     "movec    %%d0,%%itt0\n\t"
-             "movec    %%d0,%%dtt0\n\t"
-	     ".chip 68k\n\t"
-             "jmp   %0@\n\t"
-             : /* no outputs */
-             : "a" (jmp_addr040)
-             : "d0" );
-      jmp_addr_label040:
-        __asm__ __volatile__
-          ("moveq #0,%/d0\n\t"
-	   "nop\n\t"
-	   ".chip 68040\n\t"
-	   "cinva %%bc\n\t"
-	   "nop\n\t"
-	   "pflusha\n\t"
-	   "nop\n\t"
-	   "movec %%d0,%%tc\n\t"
-	   "nop\n\t"
-	   /* the following setup of transparent translations is needed on the
-	    * Afterburner040 to successfully reboot. Other machines shouldn't
-	    * care about a different tt regs setup, they also didn't care in
-	    * the past that the regs weren't turned off. */
-	   "movel #0xffc000,%%d0\n\t" /* whole insn space cacheable */
-	   "movec %%d0,%%itt0\n\t"
-	   "movec %%d0,%%itt1\n\t"
-	   "orw   #0x40,%/d0\n\t" /* whole data space non-cacheable/ser. */
-	   "movec %%d0,%%dtt0\n\t"
-	   "movec %%d0,%%dtt1\n\t"
-	   ".chip 68k\n\t"
-           "jmp %0@"
-           : /* no outputs */
-           : "a" (reset_addr)
-           : "d0");
-    }
-    else
-        __asm__ __volatile__
-            ("pmove %0@,%/tc\n\t"
-             "jmp %1@"
-             : /* no outputs */
-             : "a" (&tc_val), "a" (reset_addr));
+	long tc_val = 0;
+	long reset_addr;
+
+	/*
+	 * On the Medusa, phys. 0x4 may contain garbage because it's no
+	 * ROM.  See above for explanation why we cannot use PTOV(4).
+	 */
+	reset_addr = MACH_IS_HADES ? 0x7fe00030 :
+		     MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
+		     *(unsigned long *) 0xff000004;
+
+	/* reset ACIA for switch off OverScan, if it's active */
+	if (atari_switches & ATARI_SWITCH_OVSC_IKBD)
+		acia.key_ctrl = ACIA_RESET;
+	if (atari_switches & ATARI_SWITCH_OVSC_MIDI)
+		acia.mid_ctrl = ACIA_RESET;
+
+	/* processor independent: turn off interrupts and reset the VBR;
+	 * the caches must be left enabled, else prefetching the final jump
+	 * instruction doesn't work.
+	 */
+	local_irq_disable();
+	asm volatile ("movec	%0,%%vbr"
+			: : "d" (0));
+
+	if (CPU_IS_040_OR_060) {
+		unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
+		if (CPU_IS_060) {
+			/* 68060: clear PCR to turn off superscalar operation */
+			asm volatile ("\n"
+				"	.chip 68060\n"
+				"	movec %0,%%pcr\n"
+				"	.chip 68k"
+				: : "d" (0));
+		}
+
+		asm volatile ("\n"
+			"	move.l	%0,%%d0\n"
+			"	and.l	#0xff000000,%%d0\n"
+			"	or.w	#0xe020,%%d0\n"   /* map 16 MB, enable, cacheable */
+			"	.chip	68040\n"
+			"	movec	%%d0,%%itt0\n"
+			"	movec	%%d0,%%dtt0\n"
+			"	.chip	68k\n"
+			"	jmp	%0@"
+			: : "a" (jmp_addr040)
+			: "d0");
+	jmp_addr_label040:
+		asm volatile ("\n"
+			"	moveq	#0,%%d0\n"
+			"	nop\n"
+			"	.chip	68040\n"
+			"	cinva	%%bc\n"
+			"	nop\n"
+			"	pflusha\n"
+			"	nop\n"
+			"	movec	%%d0,%%tc\n"
+			"	nop\n"
+			/* the following setup of transparent translations is needed on the
+			 * Afterburner040 to successfully reboot. Other machines shouldn't
+			 * care about a different tt regs setup, they also didn't care in
+			 * the past that the regs weren't turned off. */
+			"	move.l	#0xffc000,%%d0\n" /* whole insn space cacheable */
+			"	movec	%%d0,%%itt0\n"
+			"	movec	%%d0,%%itt1\n"
+			"	or.w	#0x40,%/d0\n" /* whole data space non-cacheable/ser. */
+			"	movec	%%d0,%%dtt0\n"
+			"	movec	%%d0,%%dtt1\n"
+			"	.chip	68k\n"
+			"	jmp	%0@"
+			: /* no outputs */
+			: "a" (reset_addr)
+			: "d0");
+	} else
+		asm volatile ("\n"
+			"	pmove	%0@,%%tc\n"
+			"	jmp	%1@"
+			: /* no outputs */
+			: "a" (&tc_val), "a" (reset_addr));
 }
 
 
 static void atari_get_model(char *model)
 {
-    strcpy(model, "Atari ");
-    switch (atari_mch_cookie >> 16) {
+	strcpy(model, "Atari ");
+	switch (atari_mch_cookie >> 16) {
 	case ATARI_MCH_ST:
-	    if (ATARIHW_PRESENT(MSTE_CLK))
-		strcat (model, "Mega ST");
-	    else
-		strcat (model, "ST");
-	    break;
+		if (ATARIHW_PRESENT(MSTE_CLK))
+			strcat(model, "Mega ST");
+		else
+			strcat(model, "ST");
+		break;
 	case ATARI_MCH_STE:
-	    if (MACH_IS_MSTE)
-		strcat (model, "Mega STE");
-	    else
-		strcat (model, "STE");
-	    break;
+		if (MACH_IS_MSTE)
+			strcat(model, "Mega STE");
+		else
+			strcat(model, "STE");
+		break;
 	case ATARI_MCH_TT:
-	    if (MACH_IS_MEDUSA)
-		/* Medusa has TT _MCH cookie */
-		strcat (model, "Medusa");
-	    else if (MACH_IS_HADES)
-		strcat(model, "Hades");
-	    else
-		strcat (model, "TT");
-	    break;
+		if (MACH_IS_MEDUSA)
+			/* Medusa has TT _MCH cookie */
+			strcat(model, "Medusa");
+		else if (MACH_IS_HADES)
+			strcat(model, "Hades");
+		else
+			strcat(model, "TT");
+		break;
 	case ATARI_MCH_FALCON:
-	    strcat (model, "Falcon");
-	    if (MACH_IS_AB40)
-		strcat (model, " (with Afterburner040)");
-	    break;
+		strcat(model, "Falcon");
+		if (MACH_IS_AB40)
+			strcat(model, " (with Afterburner040)");
+		break;
 	default:
-	    sprintf (model + strlen (model), "(unknown mach cookie 0x%lx)",
-		     atari_mch_cookie);
-	    break;
-    }
+		sprintf(model + strlen(model), "(unknown mach cookie 0x%lx)",
+			atari_mch_cookie);
+		break;
+	}
 }
 
 
 static int atari_get_hardware_list(char *buffer)
 {
-    int len = 0, i;
-
-    for (i = 0; i < m68k_num_memory; i++)
-	len += sprintf (buffer+len, "\t%3ld MB at 0x%08lx (%s)\n",
-			m68k_memory[i].size >> 20, m68k_memory[i].addr,
-			(m68k_memory[i].addr & 0xff000000 ?
-			 "alternate RAM" : "ST-RAM"));
-
-#define ATARIHW_ANNOUNCE(name,str)				\
-    if (ATARIHW_PRESENT(name))			\
-	len += sprintf (buffer + len, "\t%s\n", str)
-
-    len += sprintf (buffer + len, "Detected hardware:\n");
-    ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
-    ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
-    ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
-    ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
-    ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
-    ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
-    ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
-    ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
-    ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
-    ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
-    ATARIHW_ANNOUNCE(IDE, "IDE Interface");
-    ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
-    ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
-    ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
-    ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
-    ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
-    ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
-    ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
-    ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
-    ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
-    ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
-    ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
-    ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
-    ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
-    ATARIHW_ANNOUNCE(SCU, "System Control Unit");
-    ATARIHW_ANNOUNCE(BLITTER, "Blitter");
-    ATARIHW_ANNOUNCE(VME, "VME Bus");
-    ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
-
-    return(len);
+	int len = 0, i;
+
+	for (i = 0; i < m68k_num_memory; i++)
+		len += sprintf(buffer+len, "\t%3ld MB at 0x%08lx (%s)\n",
+				m68k_memory[i].size >> 20, m68k_memory[i].addr,
+				(m68k_memory[i].addr & 0xff000000 ?
+				 "alternate RAM" : "ST-RAM"));
+
+#define ATARIHW_ANNOUNCE(name, str)			\
+	if (ATARIHW_PRESENT(name))			\
+		len += sprintf(buffer + len, "\t%s\n", str)
+
+	len += sprintf(buffer + len, "Detected hardware:\n");
+	ATARIHW_ANNOUNCE(STND_SHIFTER, "ST Shifter");
+	ATARIHW_ANNOUNCE(EXTD_SHIFTER, "STe Shifter");
+	ATARIHW_ANNOUNCE(TT_SHIFTER, "TT Shifter");
+	ATARIHW_ANNOUNCE(VIDEL_SHIFTER, "Falcon Shifter");
+	ATARIHW_ANNOUNCE(YM_2149, "Programmable Sound Generator");
+	ATARIHW_ANNOUNCE(PCM_8BIT, "PCM 8 Bit Sound");
+	ATARIHW_ANNOUNCE(CODEC, "CODEC Sound");
+	ATARIHW_ANNOUNCE(TT_SCSI, "SCSI Controller NCR5380 (TT style)");
+	ATARIHW_ANNOUNCE(ST_SCSI, "SCSI Controller NCR5380 (Falcon style)");
+	ATARIHW_ANNOUNCE(ACSI, "ACSI Interface");
+	ATARIHW_ANNOUNCE(IDE, "IDE Interface");
+	ATARIHW_ANNOUNCE(FDCSPEED, "8/16 Mhz Switch for FDC");
+	ATARIHW_ANNOUNCE(ST_MFP, "Multi Function Peripheral MFP 68901");
+	ATARIHW_ANNOUNCE(TT_MFP, "Second Multi Function Peripheral MFP 68901");
+	ATARIHW_ANNOUNCE(SCC, "Serial Communications Controller SCC 8530");
+	ATARIHW_ANNOUNCE(ST_ESCC, "Extended Serial Communications Controller SCC 85230");
+	ATARIHW_ANNOUNCE(ANALOG_JOY, "Paddle Interface");
+	ATARIHW_ANNOUNCE(MICROWIRE, "MICROWIRE(tm) Interface");
+	ATARIHW_ANNOUNCE(STND_DMA, "DMA Controller (24 bit)");
+	ATARIHW_ANNOUNCE(EXTD_DMA, "DMA Controller (32 bit)");
+	ATARIHW_ANNOUNCE(SCSI_DMA, "DMA Controller for NCR5380");
+	ATARIHW_ANNOUNCE(SCC_DMA, "DMA Controller for SCC");
+	ATARIHW_ANNOUNCE(TT_CLK, "Clock Chip MC146818A");
+	ATARIHW_ANNOUNCE(MSTE_CLK, "Clock Chip RP5C15");
+	ATARIHW_ANNOUNCE(SCU, "System Control Unit");
+	ATARIHW_ANNOUNCE(BLITTER, "Blitter");
+	ATARIHW_ANNOUNCE(VME, "VME Bus");
+	ATARIHW_ANNOUNCE(DSP56K, "DSP56001 processor");
+
+	return len;
 }
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  tab-width: 8
- * End:
- */
diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
index 4ae0100..66983fe 100644
--- a/arch/m68k/atari/debug.c
+++ b/arch/m68k/atari/debug.c
@@ -30,317 +30,311 @@ int atari_SCC_init_done;
 int atari_SCC_reset_done;
 
 static struct console atari_console_driver = {
-	.name =		"debug",
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
+	.name	= "debug",
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
 };
 
 
-static inline void ata_mfp_out (char c)
+static inline void ata_mfp_out(char c)
 {
-    while (!(mfp.trn_stat & 0x80)) /* wait for tx buf empty */
-	barrier ();
-    mfp.usart_dta = c;
+	while (!(mfp.trn_stat & 0x80))	/* wait for tx buf empty */
+		barrier();
+	mfp.usart_dta = c;
 }
 
-void atari_mfp_console_write (struct console *co, const char *str,
-			      unsigned int count)
+void atari_mfp_console_write(struct console *co, const char *str,
+			     unsigned int count)
 {
-    while (count--) {
-	if (*str == '\n')
-	    ata_mfp_out( '\r' );
-	ata_mfp_out( *str++ );
-    }
+	while (count--) {
+		if (*str == '\n')
+			ata_mfp_out('\r');
+		ata_mfp_out(*str++);
+	}
 }
 
-static inline void ata_scc_out (char c)
+static inline void ata_scc_out(char c)
 {
-    do {
+	do {
+		MFPDELAY();
+	} while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
 	MFPDELAY();
-    } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
-    MFPDELAY();
-    scc.cha_b_data = c;
+	scc.cha_b_data = c;
 }
 
-void atari_scc_console_write (struct console *co, const char *str,
-			      unsigned int count)
+void atari_scc_console_write(struct console *co, const char *str,
+			     unsigned int count)
 {
-    while (count--) {
-	if (*str == '\n')
-	    ata_scc_out( '\r' );
-	ata_scc_out( *str++ );
-    }
+	while (count--) {
+		if (*str == '\n')
+			ata_scc_out('\r');
+		ata_scc_out(*str++);
+	}
 }
 
-static inline void ata_midi_out (char c)
+static inline void ata_midi_out(char c)
 {
-    while (!(acia.mid_ctrl & ACIA_TDRE)) /* wait for tx buf empty */
-	barrier ();
-    acia.mid_data = c;
+	while (!(acia.mid_ctrl & ACIA_TDRE))	/* wait for tx buf empty */
+		barrier();
+	acia.mid_data = c;
 }
 
-void atari_midi_console_write (struct console *co, const char *str,
-			       unsigned int count)
+void atari_midi_console_write(struct console *co, const char *str,
+			      unsigned int count)
 {
-    while (count--) {
-	if (*str == '\n')
-	    ata_midi_out( '\r' );
-	ata_midi_out( *str++ );
-    }
+	while (count--) {
+		if (*str == '\n')
+			ata_midi_out('\r');
+		ata_midi_out(*str++);
+	}
 }
 
-static int ata_par_out (char c)
+static int ata_par_out(char c)
 {
-    unsigned char tmp;
-    /* This a some-seconds timeout in case no printer is connected */
-    unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
-
-    while( (mfp.par_dt_reg & 1) && --i ) /* wait for BUSY == L */
-	;
-    if (!i) return( 0 );
-
-    sound_ym.rd_data_reg_sel = 15;  /* select port B */
-    sound_ym.wd_data = c;           /* put char onto port */
-    sound_ym.rd_data_reg_sel = 14;  /* select port A */
-    tmp = sound_ym.rd_data_reg_sel;
-    sound_ym.wd_data = tmp & ~0x20; /* set strobe L */
-    MFPDELAY();                     /* wait a bit */
-    sound_ym.wd_data = tmp | 0x20;  /* set strobe H */
-    return( 1 );
+	unsigned char tmp;
+	/* This a some-seconds timeout in case no printer is connected */
+	unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
+
+	while ((mfp.par_dt_reg & 1) && --i) /* wait for BUSY == L */
+		;
+	if (!i)
+		return 0;
+
+	sound_ym.rd_data_reg_sel = 15;	/* select port B */
+	sound_ym.wd_data = c;		/* put char onto port */
+	sound_ym.rd_data_reg_sel = 14;	/* select port A */
+	tmp = sound_ym.rd_data_reg_sel;
+	sound_ym.wd_data = tmp & ~0x20;	/* set strobe L */
+	MFPDELAY();			/* wait a bit */
+	sound_ym.wd_data = tmp | 0x20;	/* set strobe H */
+	return 1;
 }
 
-static void atari_par_console_write (struct console *co, const char *str,
-				     unsigned int count)
+static void atari_par_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
-    static int printer_present = 1;
-
-    if (!printer_present)
-	return;
+	static int printer_present = 1;
 
-    while (count--) {
-	if (*str == '\n')
-	    if (!ata_par_out( '\r' )) {
-		printer_present = 0;
+	if (!printer_present)
 		return;
-	    }
-	if (!ata_par_out( *str++ )) {
-	    printer_present = 0;
-	    return;
+
+	while (count--) {
+		if (*str == '\n') {
+			if (!ata_par_out('\r')) {
+				printer_present = 0;
+				return;
+			}
+		}
+		if (!ata_par_out(*str++)) {
+			printer_present = 0;
+			return;
+		}
 	}
-    }
 }
 
 #ifdef CONFIG_SERIAL_CONSOLE
 int atari_mfp_console_wait_key(struct console *co)
 {
-    while( !(mfp.rcv_stat & 0x80) ) /* wait for rx buf filled */
-	barrier();
-    return( mfp.usart_dta );
+	while (!(mfp.rcv_stat & 0x80))	/* wait for rx buf filled */
+		barrier();
+	return mfp.usart_dta;
 }
 
 int atari_scc_console_wait_key(struct console *co)
 {
-    do {
+	do {
+		MFPDELAY();
+	} while (!(scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
 	MFPDELAY();
-    } while( !(scc.cha_b_ctrl & 0x01) ); /* wait for rx buf filled */
-    MFPDELAY();
-    return( scc.cha_b_data );
+	return scc.cha_b_data;
 }
 
 int atari_midi_console_wait_key(struct console *co)
 {
-    while( !(acia.mid_ctrl & ACIA_RDRF) ) /* wait for rx buf filled */
-	barrier();
-    return( acia.mid_data );
+	while (!(acia.mid_ctrl & ACIA_RDRF)) /* wait for rx buf filled */
+		barrier();
+	return acia.mid_data;
 }
 #endif
 
-/* The following two functions do a quick'n'dirty initialization of the MFP or
+/*
+ * The following two functions do a quick'n'dirty initialization of the MFP or
  * SCC serial ports. They're used by the debugging interface, kgdb, and the
- * serial console code. */
+ * serial console code.
+ */
 #ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_mfp_port( int cflag )
+static void __init atari_init_mfp_port(int cflag)
 #else
-void atari_init_mfp_port( int cflag )
+void atari_init_mfp_port(int cflag)
 #endif
 {
-    /* timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
-     * bps, resp., and work only correct if there's a RSVE or RSSPEED */
-    static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 };
-    int baud = cflag & CBAUD;
-    int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0;
-    int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00;
-
-    if (cflag & CBAUDEX)
-	baud += B38400;
-    if (baud < B1200 || baud > B38400+2)
-	baud = B9600; /* use default 9600bps for non-implemented rates */
-    baud -= B1200; /* baud_table[] starts at 1200bps */
-
-    mfp.trn_stat &= ~0x01; /* disable TX */
-    mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
-    mfp.tim_ct_cd &= 0x70;  /* stop timer D */
-    mfp.tim_dt_d = baud_table[baud];
-    mfp.tim_ct_cd |= 0x01;  /* start timer D, 1:4 */
-    mfp.trn_stat |= 0x01;  /* enable TX */
-
-    atari_MFP_init_done = 1;
+	/*
+	 * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
+	 * bps, resp., and work only correct if there's a RSVE or RSSPEED
+	 */
+	static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 };
+	int baud = cflag & CBAUD;
+	int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0;
+	int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00;
+
+	if (cflag & CBAUDEX)
+		baud += B38400;
+	if (baud < B1200 || baud > B38400+2)
+		baud = B9600;		/* use default 9600bps for non-implemented rates */
+	baud -= B1200;			/* baud_table[] starts at 1200bps */
+
+	mfp.trn_stat &= ~0x01;		/* disable TX */
+	mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
+	mfp.tim_ct_cd &= 0x70;		/* stop timer D */
+	mfp.tim_dt_d = baud_table[baud];
+	mfp.tim_ct_cd |= 0x01;		/* start timer D, 1:4 */
+	mfp.trn_stat |= 0x01;		/* enable TX */
+
+	atari_MFP_init_done = 1;
 }
 
-#define SCC_WRITE(reg,val)				\
-    do {						\
-	scc.cha_b_ctrl = (reg);				\
-	MFPDELAY();					\
-	scc.cha_b_ctrl = (val);				\
-	MFPDELAY();					\
-    } while(0)
+#define SCC_WRITE(reg, val)				\
+	do {						\
+		scc.cha_b_ctrl = (reg);			\
+		MFPDELAY();				\
+		scc.cha_b_ctrl = (val);			\
+		MFPDELAY();				\
+	} while (0)
 
 /* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
  * delay of ~ 60us. */
-#define LONG_DELAY()				\
-    do {					\
-	int i;					\
-	for( i = 100; i > 0; --i )		\
-	    MFPDELAY();				\
-    } while(0)
+#define LONG_DELAY()					\
+	do {						\
+		int i;					\
+		for (i = 100; i > 0; --i)		\
+			MFPDELAY();			\
+	} while (0)
 
 #ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_scc_port( int cflag )
+static void __init atari_init_scc_port(int cflag)
 #else
-void atari_init_scc_port( int cflag )
+void atari_init_scc_port(int cflag)
 #endif
 {
-    extern int atari_SCC_reset_done;
-    static int clksrc_table[9] =
-	/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
-	{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
-    static int brgsrc_table[9] =
-	/* reg 14: 0 = RTxC, 2 = PCLK */
-	{ 2, 2, 2, 2, 2, 2, 0, 2, 2 };
-    static int clkmode_table[9] =
-	/* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
-	{ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
-    static int div_table[9] =
-	/* reg12 (BRG low) */
-	{ 208, 138, 103, 50, 24, 11, 1, 0, 0 };
-
-    int baud = cflag & CBAUD;
-    int clksrc, clkmode, div, reg3, reg5;
-
-    if (cflag & CBAUDEX)
-	baud += B38400;
-    if (baud < B1200 || baud > B38400+2)
-	baud = B9600; /* use default 9600bps for non-implemented rates */
-    baud -= B1200; /* tables starts at 1200bps */
-
-    clksrc  = clksrc_table[baud];
-    clkmode = clkmode_table[baud];
-    div     = div_table[baud];
-    if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) {
-	/* special treatment for TT, where rates >= 38400 are done via TRxC */
-	clksrc = 0x28; /* TRxC */
-	clkmode = baud == 6 ? 0xc0 :
-		  baud == 7 ? 0x80 : /* really 76800bps */
-			      0x40;  /* really 153600bps */
-	div = 0;
-    }
-
-    reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
-    reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
-
-    (void)scc.cha_b_ctrl;	/* reset reg pointer */
-    SCC_WRITE( 9, 0xc0 );	/* reset */
-    LONG_DELAY();		/* extra delay after WR9 access */
-    SCC_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
-		  0x04 /* 1 stopbit */ |
-		  clkmode );
-    SCC_WRITE( 3, reg3 );
-    SCC_WRITE( 5, reg5 );
-    SCC_WRITE( 9, 0 );		/* no interrupts */
-    LONG_DELAY();		/* extra delay after WR9 access */
-    SCC_WRITE( 10, 0 );		/* NRZ mode */
-    SCC_WRITE( 11, clksrc );	/* main clock source */
-    SCC_WRITE( 12, div );	/* BRG value */
-    SCC_WRITE( 13, 0 );		/* BRG high byte */
-    SCC_WRITE( 14, brgsrc_table[baud] );
-    SCC_WRITE( 14, brgsrc_table[baud] | (div ? 1 : 0) );
-    SCC_WRITE( 3, reg3 | 1 );
-    SCC_WRITE( 5, reg5 | 8 );
-
-    atari_SCC_reset_done = 1;
-    atari_SCC_init_done = 1;
+	extern int atari_SCC_reset_done;
+	static int clksrc_table[9] =
+		/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
+		{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
+	static int brgsrc_table[9] =
+		/* reg 14: 0 = RTxC, 2 = PCLK */
+		{ 2, 2, 2, 2, 2, 2, 0, 2, 2 };
+	static int clkmode_table[9] =
+		/* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
+		{ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
+	static int div_table[9] =
+		/* reg12 (BRG low) */
+		{ 208, 138, 103, 50, 24, 11, 1, 0, 0 };
+
+	int baud = cflag & CBAUD;
+	int clksrc, clkmode, div, reg3, reg5;
+
+	if (cflag & CBAUDEX)
+		baud += B38400;
+	if (baud < B1200 || baud > B38400+2)
+		baud = B9600;		/* use default 9600bps for non-implemented rates */
+	baud -= B1200;			/* tables starts at 1200bps */
+
+	clksrc  = clksrc_table[baud];
+	clkmode = clkmode_table[baud];
+	div     = div_table[baud];
+	if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) {
+		/* special treatment for TT, where rates >= 38400 are done via TRxC */
+		clksrc = 0x28;		/* TRxC */
+		clkmode = baud == 6 ? 0xc0 :
+			  baud == 7 ? 0x80 : /* really 76800bps */
+				      0x40;  /* really 153600bps */
+		div = 0;
+	}
+
+	reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
+	reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
+
+	(void)scc.cha_b_ctrl;		/* reset reg pointer */
+	SCC_WRITE(9, 0xc0);		/* reset */
+	LONG_DELAY();			/* extra delay after WR9 access */
+	SCC_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03)
+				      : 0 | 0x04 /* 1 stopbit */ | clkmode);
+	SCC_WRITE(3, reg3);
+	SCC_WRITE(5, reg5);
+	SCC_WRITE(9, 0);		/* no interrupts */
+	LONG_DELAY();			/* extra delay after WR9 access */
+	SCC_WRITE(10, 0);		/* NRZ mode */
+	SCC_WRITE(11, clksrc);		/* main clock source */
+	SCC_WRITE(12, div);		/* BRG value */
+	SCC_WRITE(13, 0);		/* BRG high byte */
+	SCC_WRITE(14, brgsrc_table[baud]);
+	SCC_WRITE(14, brgsrc_table[baud] | (div ? 1 : 0));
+	SCC_WRITE(3, reg3 | 1);
+	SCC_WRITE(5, reg5 | 8);
+
+	atari_SCC_reset_done = 1;
+	atari_SCC_init_done = 1;
 }
 
 #ifndef CONFIG_SERIAL_CONSOLE
-static void __init atari_init_midi_port( int cflag )
+static void __init atari_init_midi_port(int cflag)
 #else
-void atari_init_midi_port( int cflag )
+void atari_init_midi_port(int cflag)
 #endif
 {
-    int baud = cflag & CBAUD;
-    int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
-    /* warning 7N1 isn't possible! (instead 7O2 is used...) */
-    int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04;
-    int div;
-
-    /* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as
-     * default) the standard MIDI speed 31250. */
-    if (cflag & CBAUDEX)
-	baud += B38400;
-    if (baud == B4800)
-	div = ACIA_DIV64; /* really 7812.5 bps */
-    else if (baud == B38400+2 /* 115200 */)
-	div = ACIA_DIV1; /* really 500 kbps (does that work??) */
-    else
-	div = ACIA_DIV16; /* 31250 bps, standard for MIDI */
-
-    /* RTS low, ints disabled */
-    acia.mid_ctrl = div | csize | parity |
+	int baud = cflag & CBAUD;
+	int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
+	/* warning 7N1 isn't possible! (instead 7O2 is used...) */
+	int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04;
+	int div;
+
+	/* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as
+	 * default) the standard MIDI speed 31250. */
+	if (cflag & CBAUDEX)
+		baud += B38400;
+	if (baud == B4800)
+		div = ACIA_DIV64;	/* really 7812.5 bps */
+	else if (baud == B38400+2 /* 115200 */)
+		div = ACIA_DIV1;	/* really 500 kbps (does that work??) */
+	else
+		div = ACIA_DIV16;	/* 31250 bps, standard for MIDI */
+
+	/* RTS low, ints disabled */
+	acia.mid_ctrl = div | csize | parity |
 		    ((atari_switches & ATARI_SWITCH_MIDI) ?
 		     ACIA_RHTID : ACIA_RLTID);
 }
 
 void __init atari_debug_init(void)
 {
-    if (!strcmp( m68k_debug_device, "ser" )) {
-	/* defaults to ser2 for a Falcon and ser1 otherwise */
-	strcpy( m68k_debug_device, MACH_IS_FALCON ? "ser2" : "ser1" );
-
-    }
-
-    if (!strcmp( m68k_debug_device, "ser1" )) {
-	/* ST-MFP Modem1 serial port */
-	atari_init_mfp_port( B9600|CS8 );
-	atari_console_driver.write = atari_mfp_console_write;
-    }
-    else if (!strcmp( m68k_debug_device, "ser2" )) {
-	/* SCC Modem2 serial port */
-	atari_init_scc_port( B9600|CS8 );
-	atari_console_driver.write = atari_scc_console_write;
-    }
-    else if (!strcmp( m68k_debug_device, "midi" )) {
-	/* MIDI port */
-	atari_init_midi_port( B9600|CS8 );
-	atari_console_driver.write = atari_midi_console_write;
-    }
-    else if (!strcmp( m68k_debug_device, "par" )) {
-	/* parallel printer */
-	atari_turnoff_irq( IRQ_MFP_BUSY ); /* avoid ints */
-	sound_ym.rd_data_reg_sel = 7;  /* select mixer control */
-	sound_ym.wd_data = 0xff;       /* sound off, ports are output */
-	sound_ym.rd_data_reg_sel = 15; /* select port B */
-	sound_ym.wd_data = 0;          /* no char */
-	sound_ym.rd_data_reg_sel = 14; /* select port A */
-	sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */
-	atari_console_driver.write = atari_par_console_write;
-    }
-    if (atari_console_driver.write)
-	register_console(&atari_console_driver);
-}
+	if (!strcmp(m68k_debug_device, "ser")) {
+		/* defaults to ser2 for a Falcon and ser1 otherwise */
+		strcpy(m68k_debug_device, MACH_IS_FALCON ? "ser2" : "ser1");
+	}
 
-/*
- * Local variables:
- *  c-indent-level: 4
- *  tab-width: 8
- * End:
- */
+	if (!strcmp(m68k_debug_device, "ser1")) {
+		/* ST-MFP Modem1 serial port */
+		atari_init_mfp_port(B9600|CS8);
+		atari_console_driver.write = atari_mfp_console_write;
+	} else if (!strcmp(m68k_debug_device, "ser2")) {
+		/* SCC Modem2 serial port */
+		atari_init_scc_port(B9600|CS8);
+		atari_console_driver.write = atari_scc_console_write;
+	} else if (!strcmp(m68k_debug_device, "midi")) {
+		/* MIDI port */
+		atari_init_midi_port(B9600|CS8);
+		atari_console_driver.write = atari_midi_console_write;
+	} else if (!strcmp(m68k_debug_device, "par")) {
+		/* parallel printer */
+		atari_turnoff_irq(IRQ_MFP_BUSY); /* avoid ints */
+		sound_ym.rd_data_reg_sel = 7;	/* select mixer control */
+		sound_ym.wd_data = 0xff;	/* sound off, ports are output */
+		sound_ym.rd_data_reg_sel = 15;	/* select port B */
+		sound_ym.wd_data = 0;		/* no char */
+		sound_ym.rd_data_reg_sel = 14;	/* select port A */
+		sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */
+		atari_console_driver.write = atari_par_console_write;
+	}
+	if (atari_console_driver.write)
+		register_console(&atari_console_driver);
+}
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 222ce42..e162ee68 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -692,7 +692,7 @@ sys_call_table:
 	.long sys_tgkill	/* 265 */
 	.long sys_utimes
 	.long sys_fadvise64_64
-	.long sys_mbind	
+	.long sys_mbind
 	.long sys_get_mempolicy
 	.long sys_set_mempolicy	/* 270 */
 	.long sys_mq_open
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index 6739e87..05741f2 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -3195,7 +3195,7 @@ func_start	serial_putc,%d0/%d1/%a0/%a1
 	jbra	L(serial_putc_done)
 3:
 #endif
-	
+
 L(serial_putc_done):
 func_return	serial_putc
 
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index 42b8fd0..852cefe 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -133,78 +133,78 @@ extern void config_hp300(void);
 extern void config_q40(void);
 extern void config_sun3x(void);
 
-extern void mac_debugging_short (int, short);
-extern void mac_debugging_long  (int, long);
-
 #define MASK_256K 0xfffc0000
 
 extern void paging_init(void);
 
 static void __init m68k_parse_bootinfo(const struct bi_record *record)
 {
-    while (record->tag != BI_LAST) {
-	int unknown = 0;
-	const unsigned long *data = record->data;
-	switch (record->tag) {
-	    case BI_MACHTYPE:
-	    case BI_CPUTYPE:
-	    case BI_FPUTYPE:
-	    case BI_MMUTYPE:
-		/* Already set up by head.S */
-		break;
-
-	    case BI_MEMCHUNK:
-		if (m68k_num_memory < NUM_MEMINFO) {
-		    m68k_memory[m68k_num_memory].addr = data[0];
-		    m68k_memory[m68k_num_memory].size = data[1];
-		    m68k_num_memory++;
-		} else
-		    printk("m68k_parse_bootinfo: too many memory chunks\n");
-		break;
-
-	    case BI_RAMDISK:
-		m68k_ramdisk.addr = data[0];
-		m68k_ramdisk.size = data[1];
-		break;
-
-	    case BI_COMMAND_LINE:
-		strlcpy(m68k_command_line, (const char *)data, sizeof(m68k_command_line));
-		break;
-
-	    default:
-		if (MACH_IS_AMIGA)
-		    unknown = amiga_parse_bootinfo(record);
-		else if (MACH_IS_ATARI)
-		    unknown = atari_parse_bootinfo(record);
-		else if (MACH_IS_MAC)
-		    unknown = mac_parse_bootinfo(record);
-		else if (MACH_IS_Q40)
-		    unknown = q40_parse_bootinfo(record);
-		else if (MACH_IS_BVME6000)
-		    unknown = bvme6000_parse_bootinfo(record);
-		else if (MACH_IS_MVME16x)
-		    unknown = mvme16x_parse_bootinfo(record);
-		else if (MACH_IS_MVME147)
-		    unknown = mvme147_parse_bootinfo(record);
-		else if (MACH_IS_HP300)
-		    unknown = hp300_parse_bootinfo(record);
-		else
-		    unknown = 1;
+	while (record->tag != BI_LAST) {
+		int unknown = 0;
+		const unsigned long *data = record->data;
+
+		switch (record->tag) {
+		case BI_MACHTYPE:
+		case BI_CPUTYPE:
+		case BI_FPUTYPE:
+		case BI_MMUTYPE:
+			/* Already set up by head.S */
+			break;
+
+		case BI_MEMCHUNK:
+			if (m68k_num_memory < NUM_MEMINFO) {
+				m68k_memory[m68k_num_memory].addr = data[0];
+				m68k_memory[m68k_num_memory].size = data[1];
+				m68k_num_memory++;
+			} else
+				printk("m68k_parse_bootinfo: too many memory chunks\n");
+			break;
+
+		case BI_RAMDISK:
+			m68k_ramdisk.addr = data[0];
+			m68k_ramdisk.size = data[1];
+			break;
+
+		case BI_COMMAND_LINE:
+			strlcpy(m68k_command_line, (const char *)data,
+				sizeof(m68k_command_line));
+			break;
+
+		default:
+			if (MACH_IS_AMIGA)
+				unknown = amiga_parse_bootinfo(record);
+			else if (MACH_IS_ATARI)
+				unknown = atari_parse_bootinfo(record);
+			else if (MACH_IS_MAC)
+				unknown = mac_parse_bootinfo(record);
+			else if (MACH_IS_Q40)
+				unknown = q40_parse_bootinfo(record);
+			else if (MACH_IS_BVME6000)
+				unknown = bvme6000_parse_bootinfo(record);
+			else if (MACH_IS_MVME16x)
+				unknown = mvme16x_parse_bootinfo(record);
+			else if (MACH_IS_MVME147)
+				unknown = mvme147_parse_bootinfo(record);
+			else if (MACH_IS_HP300)
+				unknown = hp300_parse_bootinfo(record);
+			else
+				unknown = 1;
+		}
+		if (unknown)
+			printk("m68k_parse_bootinfo: unknown tag 0x%04x ignored\n",
+			       record->tag);
+		record = (struct bi_record *)((unsigned long)record +
+					      record->size);
 	}
-	if (unknown)
-	    printk("m68k_parse_bootinfo: unknown tag 0x%04x ignored\n",
-		   record->tag);
-	record = (struct bi_record *)((unsigned long)record+record->size);
-    }
 
-    m68k_realnum_memory = m68k_num_memory;
+	m68k_realnum_memory = m68k_num_memory;
 #ifdef CONFIG_SINGLE_MEMORY_CHUNK
-    if (m68k_num_memory > 1) {
-	printk("Ignoring last %i chunks of physical memory\n",
-	       (m68k_num_memory - 1));
-	m68k_num_memory = 1;
-    }
-    m68k_memoffset = m68k_memory[0].addr-PAGE_OFFSET;
+	if (m68k_num_memory > 1) {
+		printk("Ignoring last %i chunks of physical memory\n",
+		       (m68k_num_memory - 1));
+		m68k_num_memory = 1;
+	}
+	m68k_memoffset = m68k_memory[0].addr-PAGE_OFFSET;
 #endif
 }
 
@@ -234,7 +234,7 @@ void __init setup_arch(char **cmdline_p)
 	/* clear the fpu if we have one */
 	if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) {
 		volatile int zero = 0;
-		asm __volatile__ ("frestore %0" : : "m" (zero));
+		asm volatile ("frestore %0" : : "m" (zero));
 	}
 #endif
 
@@ -262,32 +262,35 @@ void __init setup_arch(char **cmdline_p)
 	 * For the m68k, this is currently only "debug=xxx" to enable printing
 	 * certain kernel messages to some machine-specific device.
 	 */
-	for( p = *cmdline_p; p && *p; ) {
-	    i = 0;
-	    if (!strncmp( p, "debug=", 6 )) {
-		strlcpy( m68k_debug_device, p+6, sizeof(m68k_debug_device) );
-		if ((q = strchr( m68k_debug_device, ' ' ))) *q = 0;
-		i = 1;
-	    }
+	for (p = *cmdline_p; p && *p;) {
+		i = 0;
+		if (!strncmp(p, "debug=", 6)) {
+			strlcpy(m68k_debug_device, p+6, sizeof(m68k_debug_device));
+			q = strchr(m68k_debug_device, ' ');
+			if (q)
+				*q = 0;
+			i = 1;
+		}
 #ifdef CONFIG_ATARI
-	    /* This option must be parsed very early */
-	    if (!strncmp( p, "switches=", 9 )) {
-		extern void atari_switches_setup( const char *, int );
-		atari_switches_setup( p+9, (q = strchr( p+9, ' ' )) ?
-				           (q - (p+9)) : strlen(p+9) );
-		i = 1;
-	    }
+		/* This option must be parsed very early */
+		if (!strncmp(p, "switches=", 9)) {
+			extern void atari_switches_setup(const char *, int);
+			q = strchr(p + 9, ' ');
+			atari_switches_setup(p + 9, q ? (q - (p + 9)) : strlen(p + 9));
+			i = 1;
+		}
 #endif
 
-	    if (i) {
-		/* option processed, delete it */
-		if ((q = strchr( p, ' ' )))
-		    strcpy( p, q+1 );
-		else
-		    *p = 0;
-	    } else {
-		if ((p = strchr( p, ' ' ))) ++p;
-	    }
+		if (i) {
+			/* option processed, delete it */
+			if ((q = strchr(p, ' ')))
+				strcpy(p, q + 1);
+			else
+				*p = 0;
+		} else {
+			if ((p = strchr(p, ' ')))
+				++p;
+		}
 	}
 
 #ifdef CONFIG_DUMMY_CONSOLE
@@ -296,62 +299,62 @@ void __init setup_arch(char **cmdline_p)
 
 	switch (m68k_machtype) {
 #ifdef CONFIG_AMIGA
-	    case MACH_AMIGA:
+	case MACH_AMIGA:
 		config_amiga();
 		break;
 #endif
 #ifdef CONFIG_ATARI
-	    case MACH_ATARI:
+	case MACH_ATARI:
 		config_atari();
 		break;
 #endif
 #ifdef CONFIG_MAC
-	    case MACH_MAC:
+	case MACH_MAC:
 		config_mac();
 		break;
 #endif
 #ifdef CONFIG_SUN3
-	    case MACH_SUN3:
+	case MACH_SUN3:
 		config_sun3();
 		break;
 #endif
 #ifdef CONFIG_APOLLO
-	    case MACH_APOLLO:
+	case MACH_APOLLO:
 		config_apollo();
 		break;
 #endif
 #ifdef CONFIG_MVME147
-	    case MACH_MVME147:
+	case MACH_MVME147:
 		config_mvme147();
 		break;
 #endif
 #ifdef CONFIG_MVME16x
-	    case MACH_MVME16x:
+	case MACH_MVME16x:
 		config_mvme16x();
 		break;
 #endif
 #ifdef CONFIG_BVME6000
-	    case MACH_BVME6000:
+	case MACH_BVME6000:
 		config_bvme6000();
 		break;
 #endif
 #ifdef CONFIG_HP300
-	    case MACH_HP300:
+	case MACH_HP300:
 		config_hp300();
 		break;
 #endif
 #ifdef CONFIG_Q40
-	    case MACH_Q40:
-	        config_q40();
+	case MACH_Q40:
+		config_q40();
 		break;
 #endif
 #ifdef CONFIG_SUN3X
-	    case MACH_SUN3X:
+	case MACH_SUN3X:
 		config_sun3x();
 		break;
 #endif
-	    default:
-		panic ("No configuration setup");
+	default:
+		panic("No configuration setup");
 	}
 
 #ifndef CONFIG_SUN3
@@ -380,7 +383,7 @@ void __init setup_arch(char **cmdline_p)
 		reserve_bootmem(m68k_ramdisk.addr, m68k_ramdisk.size);
 		initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr);
 		initrd_end = initrd_start + m68k_ramdisk.size;
-		printk ("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
+		printk("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
 	}
 #endif
 
@@ -402,18 +405,18 @@ void __init setup_arch(char **cmdline_p)
 #if defined(CONFIG_ISA) && defined(MULTI_ISA)
 #if defined(CONFIG_Q40)
 	if (MACH_IS_Q40) {
-	    isa_type = Q40_ISA;
-	    isa_sex = 0;
+		isa_type = Q40_ISA;
+		isa_sex = 0;
 	}
 #elif defined(CONFIG_GG2)
-	if (MACH_IS_AMIGA && AMIGAHW_PRESENT(GG2_ISA)){
-	    isa_type = GG2_ISA;
-	    isa_sex = 0;
+	if (MACH_IS_AMIGA && AMIGAHW_PRESENT(GG2_ISA)) {
+		isa_type = GG2_ISA;
+		isa_sex = 0;
 	}
 #elif defined(CONFIG_AMIGA_PCMCIA)
-	if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)){
-	    isa_type = AG_ISA;
-	    isa_sex = 1;
+	if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)) {
+		isa_type = AG_ISA;
+		isa_sex = 1;
 	}
 #endif
 #endif
@@ -421,66 +424,66 @@ void __init setup_arch(char **cmdline_p)
 
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
-    const char *cpu, *mmu, *fpu;
-    unsigned long clockfreq, clockfactor;
+	const char *cpu, *mmu, *fpu;
+	unsigned long clockfreq, clockfactor;
 
 #define LOOP_CYCLES_68020	(8)
 #define LOOP_CYCLES_68030	(8)
 #define LOOP_CYCLES_68040	(3)
 #define LOOP_CYCLES_68060	(1)
 
-    if (CPU_IS_020) {
-	cpu = "68020";
-	clockfactor = LOOP_CYCLES_68020;
-    } else if (CPU_IS_030) {
-	cpu = "68030";
-	clockfactor = LOOP_CYCLES_68030;
-    } else if (CPU_IS_040) {
-	cpu = "68040";
-	clockfactor = LOOP_CYCLES_68040;
-    } else if (CPU_IS_060) {
-	cpu = "68060";
-	clockfactor = LOOP_CYCLES_68060;
-    } else {
-	cpu = "680x0";
-	clockfactor = 0;
-    }
+	if (CPU_IS_020) {
+		cpu = "68020";
+		clockfactor = LOOP_CYCLES_68020;
+	} else if (CPU_IS_030) {
+		cpu = "68030";
+		clockfactor = LOOP_CYCLES_68030;
+	} else if (CPU_IS_040) {
+		cpu = "68040";
+		clockfactor = LOOP_CYCLES_68040;
+	} else if (CPU_IS_060) {
+		cpu = "68060";
+		clockfactor = LOOP_CYCLES_68060;
+	} else {
+		cpu = "680x0";
+		clockfactor = 0;
+	}
 
 #ifdef CONFIG_M68KFPU_EMU_ONLY
-    fpu="none(soft float)";
+	fpu = "none(soft float)";
 #else
-    if (m68k_fputype & FPU_68881)
-	fpu = "68881";
-    else if (m68k_fputype & FPU_68882)
-	fpu = "68882";
-    else if (m68k_fputype & FPU_68040)
-	fpu = "68040";
-    else if (m68k_fputype & FPU_68060)
-	fpu = "68060";
-    else if (m68k_fputype & FPU_SUNFPA)
-	fpu = "Sun FPA";
-    else
-	fpu = "none";
+	if (m68k_fputype & FPU_68881)
+		fpu = "68881";
+	else if (m68k_fputype & FPU_68882)
+		fpu = "68882";
+	else if (m68k_fputype & FPU_68040)
+		fpu = "68040";
+	else if (m68k_fputype & FPU_68060)
+		fpu = "68060";
+	else if (m68k_fputype & FPU_SUNFPA)
+		fpu = "Sun FPA";
+	else
+		fpu = "none";
 #endif
 
-    if (m68k_mmutype & MMU_68851)
-	mmu = "68851";
-    else if (m68k_mmutype & MMU_68030)
-	mmu = "68030";
-    else if (m68k_mmutype & MMU_68040)
-	mmu = "68040";
-    else if (m68k_mmutype & MMU_68060)
-	mmu = "68060";
-    else if (m68k_mmutype & MMU_SUN3)
-	mmu = "Sun-3";
-    else if (m68k_mmutype & MMU_APOLLO)
-	mmu = "Apollo";
-    else
-	mmu = "unknown";
-
-    clockfreq = loops_per_jiffy*HZ*clockfactor;
-
-    seq_printf(m, "CPU:\t\t%s\n"
+	if (m68k_mmutype & MMU_68851)
+		mmu = "68851";
+	else if (m68k_mmutype & MMU_68030)
+		mmu = "68030";
+	else if (m68k_mmutype & MMU_68040)
+		mmu = "68040";
+	else if (m68k_mmutype & MMU_68060)
+		mmu = "68060";
+	else if (m68k_mmutype & MMU_SUN3)
+		mmu = "Sun-3";
+	else if (m68k_mmutype & MMU_APOLLO)
+		mmu = "Apollo";
+	else
+		mmu = "unknown";
+
+	clockfreq = loops_per_jiffy * HZ * clockfactor;
+
+	seq_printf(m, "CPU:\t\t%s\n"
 		   "MMU:\t\t%s\n"
 		   "FPU:\t\t%s\n"
 		   "Clocking:\t%lu.%1luMHz\n"
@@ -490,7 +493,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		   clockfreq/1000000,(clockfreq/100000)%10,
 		   loops_per_jiffy/(500000/HZ),(loops_per_jiffy/(5000/HZ))%100,
 		   loops_per_jiffy);
-    return 0;
+	return 0;
 }
 
 static void *c_start(struct seq_file *m, loff_t *pos)
@@ -506,44 +509,44 @@ static void c_stop(struct seq_file *m, void *v)
 {
 }
 struct seq_operations cpuinfo_op = {
-	.start =	c_start,
-	.next =		c_next,
-	.stop =		c_stop,
-	.show =		show_cpuinfo,
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
 };
 
 int get_hardware_list(char *buffer)
 {
-    int len = 0;
-    char model[80];
-    unsigned long mem;
-    int i;
+	int len = 0;
+	char model[80];
+	unsigned long mem;
+	int i;
 
-    if (mach_get_model)
-	mach_get_model(model);
-    else
-	strcpy(model, "Unknown m68k");
+	if (mach_get_model)
+		mach_get_model(model);
+	else
+		strcpy(model, "Unknown m68k");
 
-    len += sprintf(buffer+len, "Model:\t\t%s\n", model);
-    for (mem = 0, i = 0; i < m68k_num_memory; i++)
-	mem += m68k_memory[i].size;
-    len += sprintf(buffer+len, "System Memory:\t%ldK\n", mem>>10);
+	len += sprintf(buffer + len, "Model:\t\t%s\n", model);
+	for (mem = 0, i = 0; i < m68k_num_memory; i++)
+		mem += m68k_memory[i].size;
+	len += sprintf(buffer + len, "System Memory:\t%ldK\n", mem >> 10);
 
-    if (mach_get_hardware_list)
-	len += mach_get_hardware_list(buffer+len);
+	if (mach_get_hardware_list)
+		len += mach_get_hardware_list(buffer + len);
 
-    return(len);
+	return len;
 }
 
 void check_bugs(void)
 {
 #ifndef CONFIG_M68KFPU_EMU
 	if (m68k_fputype == 0) {
-		printk( KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
-				"WHICH IS REQUIRED BY LINUX/M68K ***\n" );
-		printk( KERN_EMERG "Upgrade your hardware or join the FPU "
-				"emulation project\n" );
-		panic( "no FPU" );
+		printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
+			"WHICH IS REQUIRED BY LINUX/M68K ***\n");
+		printk(KERN_EMERG "Upgrade your hardware or join the FPU "
+			"emulation project\n");
+		panic("no FPU");
 	}
 #endif /* !CONFIG_M68KFPU_EMU */
 }
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 562b38d..d2fbf43 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -59,15 +59,15 @@ extern struct mem_info m68k_ramdisk;
 
 extern char m68k_command_line[CL_SIZE];
 
-void *mac_env;		/* Loaded by the boot asm */
+void *mac_env;					/* Loaded by the boot asm */
 
 /* The phys. video addr. - might be bogus on some machines */
 unsigned long mac_orig_videoaddr;
 
 /* Mac specific timer functions */
-extern unsigned long mac_gettimeoffset (void);
-extern int mac_hwclk (int, struct rtc_time *);
-extern int mac_set_clock_mmss (unsigned long);
+extern unsigned long mac_gettimeoffset(void);
+extern int mac_hwclk(int, struct rtc_time *);
+extern int mac_set_clock_mmss(unsigned long);
 extern int show_mac_interrupts(struct seq_file *, void *);
 extern void iop_preinit(void);
 extern void iop_init(void);
@@ -99,51 +99,52 @@ static void mac_sched_init(irq_handler_t vector)
 
 int __init mac_parse_bootinfo(const struct bi_record *record)
 {
-    int unknown = 0;
-    const u_long *data = record->data;
+	int unknown = 0;
+	const u_long *data = record->data;
 
-    switch (record->tag) {
+	switch (record->tag) {
 	case BI_MAC_MODEL:
-	    mac_bi_data.id = *data;
-	    break;
+		mac_bi_data.id = *data;
+		break;
 	case BI_MAC_VADDR:
-	    mac_bi_data.videoaddr = *data;
-	    break;
+		mac_bi_data.videoaddr = *data;
+		break;
 	case BI_MAC_VDEPTH:
-	    mac_bi_data.videodepth = *data;
-	    break;
+		mac_bi_data.videodepth = *data;
+		break;
 	case BI_MAC_VROW:
-	    mac_bi_data.videorow = *data;
-	    break;
+		mac_bi_data.videorow = *data;
+		break;
 	case BI_MAC_VDIM:
-	    mac_bi_data.dimensions = *data;
-	    break;
+		mac_bi_data.dimensions = *data;
+		break;
 	case BI_MAC_VLOGICAL:
-	    mac_bi_data.videological = VIDEOMEMBASE + (*data & ~VIDEOMEMMASK);
-	    mac_orig_videoaddr = *data;
-	    break;
+		mac_bi_data.videological = VIDEOMEMBASE + (*data & ~VIDEOMEMMASK);
+		mac_orig_videoaddr = *data;
+		break;
 	case BI_MAC_SCCBASE:
-	    mac_bi_data.sccbase = *data;
-	    break;
+		mac_bi_data.sccbase = *data;
+		break;
 	case BI_MAC_BTIME:
-	    mac_bi_data.boottime = *data;
-	    break;
+		mac_bi_data.boottime = *data;
+		break;
 	case BI_MAC_GMTBIAS:
-	    mac_bi_data.gmtbias = *data;
-	    break;
+		mac_bi_data.gmtbias = *data;
+		break;
 	case BI_MAC_MEMSIZE:
-	    mac_bi_data.memsize = *data;
-	    break;
+		mac_bi_data.memsize = *data;
+		break;
 	case BI_MAC_CPUID:
-	    mac_bi_data.cpuid = *data;
-	    break;
-        case BI_MAC_ROMBASE:
-	    mac_bi_data.rombase = *data;
-	    break;
+		mac_bi_data.cpuid = *data;
+		break;
+	case BI_MAC_ROMBASE:
+		mac_bi_data.rombase = *data;
+		break;
 	default:
-	    unknown = 1;
-    }
-    return(unknown);
+		unknown = 1;
+		break;
+	}
+	return unknown;
 }
 
 /*
@@ -155,6 +156,7 @@ int __init mac_parse_bootinfo(const struct bi_record *record)
 static void mac_cache_card_flush(int writeback)
 {
 	unsigned long flags;
+
 	local_irq_save(flags);
 	via_flush_cache();
 	local_irq_restore(flags);
@@ -162,28 +164,27 @@ static void mac_cache_card_flush(int writeback)
 
 void __init config_mac(void)
 {
-	if (!MACH_IS_MAC) {
-	  printk(KERN_ERR "ERROR: no Mac, but config_mac() called!! \n");
-	}
+	if (!MACH_IS_MAC)
+		printk(KERN_ERR "ERROR: no Mac, but config_mac() called!! \n");
 
-	mach_sched_init      = mac_sched_init;
-	mach_init_IRQ        = mac_init_IRQ;
-	mach_get_model	 = mac_get_model;
-	mach_gettimeoffset   = mac_gettimeoffset;
+	mach_sched_init = mac_sched_init;
+	mach_init_IRQ = mac_init_IRQ;
+	mach_get_model = mac_get_model;
+	mach_gettimeoffset = mac_gettimeoffset;
 #warning move to adb/via init
 #if 0
-	mach_hwclk           = mac_hwclk;
+	mach_hwclk = mac_hwclk;
 #endif
-	mach_set_clock_mmss	 = mac_set_clock_mmss;
-	mach_reset           = mac_reset;
-	mach_halt            = mac_poweroff;
-	mach_power_off       = mac_poweroff;
+	mach_set_clock_mmss = mac_set_clock_mmss;
+	mach_reset = mac_reset;
+	mach_halt = mac_poweroff;
+	mach_power_off = mac_poweroff;
 	mach_max_dma_address = 0xffffffff;
 #if 0
-	mach_debug_init	 = mac_debug_init;
+	mach_debug_init	= mac_debug_init;
 #endif
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
-        mach_beep            = mac_mksound;
+	mach_beep = mac_mksound;
 #endif
 #ifdef CONFIG_HEARTBEAT
 #if 0
@@ -199,21 +200,22 @@ void __init config_mac(void)
 	mac_identify();
 	mac_report_hardware();
 
-	/* AFAIK only the IIci takes a cache card.  The IIfx has onboard
-	   cache ... someone needs to figure out how to tell if it's on or
-	   not. */
+	/*
+	 * AFAIK only the IIci takes a cache card.  The IIfx has onboard
+	 * cache ... someone needs to figure out how to tell if it's on or
+	 * not.
+	 */
 
 	if (macintosh_config->ident == MAC_MODEL_IICI
-	    || macintosh_config->ident == MAC_MODEL_IIFX) {
+	    || macintosh_config->ident == MAC_MODEL_IIFX)
 		mach_l2_flush = mac_cache_card_flush;
-	}
 
 	/*
 	 * Check for machine specific fixups.
 	 */
 
 #ifdef OLD_NUBUS_CODE
-	 nubus_sweep_video();
+	nubus_sweep_video();
 #endif
 }
 
@@ -233,8 +235,7 @@ void __init config_mac(void)
 struct mac_model *macintosh_config;
 EXPORT_SYMBOL(macintosh_config);
 
-static struct mac_model mac_data_table[]=
-{
+static struct mac_model mac_data_table[] = {
 	/*
 	 *	We'll pretend to be a Macintosh II, that's pretty safe.
 	 */
@@ -784,12 +785,12 @@ void mac_identify(void)
 	if (!model) {
 		/* no bootinfo model id -> NetBSD booter was used! */
 		/* XXX FIXME: breaks for model > 31 */
-		model=(mac_bi_data.cpuid>>2)&63;
-		printk (KERN_WARNING "No bootinfo model ID, using cpuid instead (hey, use Penguin!)\n");
+		model = (mac_bi_data.cpuid >> 2) & 63;
+		printk(KERN_WARNING "No bootinfo model ID, using cpuid instead (hey, use Penguin!)\n");
 	}
 
 	macintosh_config = mac_data_table;
-	for (m = macintosh_config ; m->ident != -1 ; m++) {
+	for (m = macintosh_config; m->ident != -1; m++) {
 		if (m->ident == model) {
 			macintosh_config = m;
 			break;
@@ -803,25 +804,25 @@ void mac_identify(void)
 	iop_preinit();
 	mac_debug_init();
 
-	printk (KERN_INFO "Detected Macintosh model: %d \n", model);
+	printk(KERN_INFO "Detected Macintosh model: %d \n", model);
 
 	/*
 	 * Report booter data:
 	 */
-	printk (KERN_DEBUG " Penguin bootinfo data:\n");
-	printk (KERN_DEBUG " Video: addr 0x%lx row 0x%lx depth %lx dimensions %ld x %ld\n",
+	printk(KERN_DEBUG " Penguin bootinfo data:\n");
+	printk(KERN_DEBUG " Video: addr 0x%lx row 0x%lx depth %lx dimensions %ld x %ld\n",
 		mac_bi_data.videoaddr, mac_bi_data.videorow,
 		mac_bi_data.videodepth, mac_bi_data.dimensions & 0xFFFF,
 		mac_bi_data.dimensions >> 16);
-	printk (KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx \n",
+	printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx \n",
 		mac_bi_data.videological, mac_orig_videoaddr,
 		mac_bi_data.sccbase);
-	printk (KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx \n",
+	printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx \n",
 		mac_bi_data.boottime, mac_bi_data.gmtbias);
-	printk (KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx \n",
+	printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx \n",
 		mac_bi_data.id, mac_bi_data.cpuid, mac_bi_data.memsize);
 #if 0
-	printk ("Ramdisk: addr 0x%lx size 0x%lx\n",
+	printk("Ramdisk: addr 0x%lx size 0x%lx\n",
 		m68k_ramdisk.addr, m68k_ramdisk.size);
 #endif
 
@@ -830,22 +831,22 @@ void mac_identify(void)
 	 */
 	switch (macintosh_config->scsi_type) {
 	case MAC_SCSI_OLD:
-	  MACHW_SET(MAC_SCSI_80);
-	  break;
+		MACHW_SET(MAC_SCSI_80);
+		break;
 	case MAC_SCSI_QUADRA:
 	case MAC_SCSI_QUADRA2:
 	case MAC_SCSI_QUADRA3:
-	  MACHW_SET(MAC_SCSI_96);
-	  if ((macintosh_config->ident == MAC_MODEL_Q900) ||
-	      (macintosh_config->ident == MAC_MODEL_Q950))
-	    MACHW_SET(MAC_SCSI_96_2);
-	  break;
+		MACHW_SET(MAC_SCSI_96);
+		if ((macintosh_config->ident == MAC_MODEL_Q900) ||
+		    (macintosh_config->ident == MAC_MODEL_Q950))
+			MACHW_SET(MAC_SCSI_96_2);
+		break;
 	default:
-	  printk(KERN_WARNING "config.c: wtf: unknown scsi, using 53c80\n");
-	  MACHW_SET(MAC_SCSI_80);
-	  break;
-
+		printk(KERN_WARNING "config.c: wtf: unknown scsi, using 53c80\n");
+		MACHW_SET(MAC_SCSI_80);
+		break;
 	}
+
 	iop_init();
 	via_init();
 	oss_init();
@@ -860,6 +861,6 @@ void mac_report_hardware(void)
 
 static void mac_get_model(char *str)
 {
-	strcpy(str,"Macintosh ");
+	strcpy(str, "Macintosh ");
 	strcat(str, macintosh_config->name);
 }
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c
index 4eeb09d..8399032 100644
--- a/arch/m68k/mac/debug.c
+++ b/arch/m68k/mac/debug.c
@@ -52,7 +52,7 @@ extern void mac_serial_print(const char *);
  */
 
 #ifdef DEBUG_SCREEN
-static int peng=0, line=0;
+static int peng, line;
 #endif
 
 void mac_debugging_short(int pos, short num)
@@ -74,15 +74,14 @@ void mac_debugging_short(int pos, short num)
 	}
 
 	/* calculate current offset */
-	pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes)
-		    +80*peng;
+	pengoffset = (unsigned char *)mac_videobase +
+		(150+line*2) * mac_rowbytes) + 80 * peng;
 
-	pptr=pengoffset;
+	pptr = pengoffset;
 
-	for(i=0;i<8*sizeof(short);i++) /* # of bits */
-	{
+	for (i = 0; i < 8 * sizeof(short); i++) { /* # of bits */
 		/*        value        mask for bit i, reverse order */
-		*pptr++ = (num & ( 1 << (8*sizeof(short)-i-1) ) ? 0xFF : 0x00);
+		*pptr++ = (num & (1 << (8*sizeof(short)-i-1)) ? 0xFF : 0x00);
 	}
 
 	peng++;
@@ -115,11 +114,10 @@ void mac_debugging_long(int pos, long addr)
 	pengoffset=(unsigned char *)(mac_videobase+(150+line*2)*mac_rowbytes)
 		    +80*peng;
 
-	pptr=pengoffset;
+	pptr = pengoffset;
 
-	for(i=0;i<8*sizeof(long);i++) /* # of bits */
-	{
-		*pptr++ = (addr & ( 1 << (8*sizeof(long)-i-1) ) ? 0xFF : 0x00);
+	for (i = 0; i < 8 * sizeof(long); i++) { /* # of bits */
+		*pptr++ = (addr & (1 << (8*sizeof(long)-i-1)) ? 0xFF : 0x00);
 	}
 
 	peng++;
@@ -136,16 +134,15 @@ void mac_debugging_long(int pos, long addr)
  * TODO: serial debug code
  */
 
-struct mac_SCC
- {
-  u_char cha_b_ctrl;
-  u_char char_dummy1;
-  u_char cha_a_ctrl;
-  u_char char_dummy2;
-  u_char cha_b_data;
-  u_char char_dummy3;
-  u_char cha_a_data;
- };
+struct mac_SCC {
+	u_char cha_b_ctrl;
+	u_char char_dummy1;
+	u_char cha_a_ctrl;
+	u_char char_dummy2;
+	u_char cha_b_data;
+	u_char char_dummy3;
+	u_char cha_a_data;
+};
 
 # define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase))
 
@@ -158,9 +155,9 @@ int mac_SCC_reset_done;
 static int scc_port = -1;
 
 static struct console mac_console_driver = {
-	.name =		"debug",
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
+	.name	= "debug",
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
 };
 
 /*
@@ -178,8 +175,8 @@ static struct console mac_console_driver = {
  * this driver if Mac.
  */
 
-void mac_debug_console_write (struct console *co, const char *str,
-			      unsigned int count)
+void mac_debug_console_write(struct console *co, const char *str,
+			     unsigned int count)
 {
 	mac_serial_print(str);
 }
@@ -190,48 +187,50 @@ void mac_debug_console_write (struct console *co, const char *str,
 
 #define uSEC 1
 
-static inline void mac_sccb_out (char c)
+static inline void mac_sccb_out(char c)
 {
-    int i;
-    do {
-	for( i = uSEC; i > 0; --i )
+	int i;
+
+	do {
+		for (i = uSEC; i > 0; --i)
+			barrier();
+	} while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
+	for (i = uSEC; i > 0; --i)
 		barrier();
-    } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
-    for( i = uSEC; i > 0; --i )
-	barrier();
-    scc.cha_b_data = c;
+	scc.cha_b_data = c;
 }
 
-static inline void mac_scca_out (char c)
+static inline void mac_scca_out(char c)
 {
-    int i;
-    do {
-	for( i = uSEC; i > 0; --i )
+	int i;
+
+	do {
+		for (i = uSEC; i > 0; --i)
+			barrier();
+	} while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */
+	for (i = uSEC; i > 0; --i)
 		barrier();
-    } while (!(scc.cha_a_ctrl & 0x04)); /* wait for tx buf empty */
-    for( i = uSEC; i > 0; --i )
-	barrier();
-    scc.cha_a_data = c;
+	scc.cha_a_data = c;
 }
 
-void mac_sccb_console_write (struct console *co, const char *str,
-			      unsigned int count)
+void mac_sccb_console_write(struct console *co, const char *str,
+			    unsigned int count)
 {
-    while (count--) {
-	if (*str == '\n')
-	    mac_sccb_out( '\r' );
-	mac_sccb_out( *str++ );
-    }
+	while (count--) {
+		if (*str == '\n')
+			mac_sccb_out('\r');
+		mac_sccb_out(*str++);
+	}
 }
 
-void mac_scca_console_write (struct console *co, const char *str,
-			      unsigned int count)
+void mac_scca_console_write(struct console *co, const char *str,
+			    unsigned int count)
 {
-    while (count--) {
-	if (*str == '\n')
-	    mac_scca_out( '\r' );
-	mac_scca_out( *str++ );
-    }
+	while (count--) {
+		if (*str == '\n')
+			mac_scca_out('\r');
+		mac_scca_out(*str++);
+	}
 }
 
 
@@ -239,41 +238,41 @@ void mac_scca_console_write (struct console *co, const char *str,
  * SCC serial ports. They're used by the debugging interface, kgdb, and the
  * serial console code. */
 #define SCCB_WRITE(reg,val)				\
-    do {						\
-	int i;						\
-	scc.cha_b_ctrl = (reg);				\
-	for( i = uSEC; i > 0; --i )			\
-		barrier();				\
-	scc.cha_b_ctrl = (val);				\
-	for( i = uSEC; i > 0; --i )			\
-		barrier();				\
-    } while(0)
+	do {						\
+		int i;					\
+		scc.cha_b_ctrl = (reg);			\
+		for (i = uSEC; i > 0; --i)		\
+			barrier();			\
+		scc.cha_b_ctrl = (val);			\
+		for (i = uSEC; i > 0; --i)		\
+			barrier();			\
+	} while(0)
 
 #define SCCA_WRITE(reg,val)				\
-    do {						\
-	int i;						\
-	scc.cha_a_ctrl = (reg);				\
-	for( i = uSEC; i > 0; --i )			\
-		barrier();				\
-	scc.cha_a_ctrl = (val);				\
-	for( i = uSEC; i > 0; --i )			\
-		barrier();				\
-    } while(0)
+	do {						\
+		int i;					\
+		scc.cha_a_ctrl = (reg);			\
+		for (i = uSEC; i > 0; --i)		\
+			barrier();			\
+		scc.cha_a_ctrl = (val);			\
+		for (i = uSEC; i > 0; --i)		\
+			barrier();			\
+	} while(0)
 
 /* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
  * delay of ~ 60us. */
 /* Mac: loops_per_jiffy min. 19000 ^= .5 us; MFPDELAY was 0.6 us*/
-#define LONG_DELAY()				\
-    do {					\
-	int i;					\
-	for( i = 60*uSEC; i > 0; --i )		\
-	    barrier();				\
-    } while(0)
+#define LONG_DELAY()					\
+	do {						\
+		int i;					\
+		for (i = 60*uSEC; i > 0; --i)		\
+		    barrier();				\
+	} while(0)
 
 #ifndef CONFIG_SERIAL_CONSOLE
-static void __init mac_init_scc_port( int cflag, int port )
+static void __init mac_init_scc_port(int cflag, int port)
 #else
-void mac_init_scc_port( int cflag, int port )
+void mac_init_scc_port(int cflag, int port)
 #endif
 {
 	extern int mac_SCC_reset_done;
@@ -292,71 +291,71 @@ void mac_init_scc_port( int cflag, int port )
 		/* reg12 (BRG low) */
 		{ 94, 62, 46, 22, 10, 4, 1, 0, 0 };
 
-    int baud = cflag & CBAUD;
-    int clksrc, clkmode, div, reg3, reg5;
-
-    if (cflag & CBAUDEX)
-	baud += B38400;
-    if (baud < B1200 || baud > B38400+2)
-	baud = B9600; /* use default 9600bps for non-implemented rates */
-    baud -= B1200; /* tables starts at 1200bps */
-
-    clksrc  = clksrc_table[baud];
-    clkmode = clkmode_table[baud];
-    div     = div_table[baud];
-
-    reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40);
-    reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */;
-
-    if (port == 1) {
-	    (void)scc.cha_b_ctrl;	/* reset reg pointer */
-	    SCCB_WRITE( 9, 0xc0 );	/* reset */
-	    LONG_DELAY();		/* extra delay after WR9 access */
-	    SCCB_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
-			  0x04 /* 1 stopbit */ |
-			  clkmode );
-	    SCCB_WRITE( 3, reg3 );
-	    SCCB_WRITE( 5, reg5 );
-	    SCCB_WRITE( 9, 0 );		/* no interrupts */
-	    LONG_DELAY();		/* extra delay after WR9 access */
-	    SCCB_WRITE( 10, 0 );	/* NRZ mode */
-	    SCCB_WRITE( 11, clksrc );	/* main clock source */
-	    SCCB_WRITE( 12, div );	/* BRG value */
-	    SCCB_WRITE( 13, 0 );		/* BRG high byte */
-	    SCCB_WRITE( 14, 1 );
-	    SCCB_WRITE( 3, reg3 | 1 );
-	    SCCB_WRITE( 5, reg5 | 8 );
-    } else if (port == 0) {
-	    (void)scc.cha_a_ctrl;	/* reset reg pointer */
-	    SCCA_WRITE( 9, 0xc0 );	/* reset */
-	    LONG_DELAY();		/* extra delay after WR9 access */
-	    SCCA_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
+	int baud = cflag & CBAUD;
+	int clksrc, clkmode, div, reg3, reg5;
+
+	if (cflag & CBAUDEX)
+		baud += B38400;
+	if (baud < B1200 || baud > B38400+2)
+		baud = B9600; /* use default 9600bps for non-implemented rates */
+	baud -= B1200; /* tables starts at 1200bps */
+
+	clksrc  = clksrc_table[baud];
+	clkmode = clkmode_table[baud];
+	div     = div_table[baud];
+
+	reg3 = (((cflag & CSIZE) == CS8) ? 0xc0 : 0x40);
+	reg5 = (((cflag & CSIZE) == CS8) ? 0x60 : 0x20) | 0x82 /* assert DTR/RTS */;
+
+	if (port == 1) {
+		(void)scc.cha_b_ctrl;	/* reset reg pointer */
+		SCCB_WRITE(9, 0xc0);	/* reset */
+		LONG_DELAY();		/* extra delay after WR9 access */
+		SCCB_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
+			   0x04 /* 1 stopbit */ |
+			   clkmode);
+		SCCB_WRITE(3, reg3);
+		SCCB_WRITE(5, reg5);
+		SCCB_WRITE(9, 0);	/* no interrupts */
+		LONG_DELAY();		/* extra delay after WR9 access */
+		SCCB_WRITE(10, 0);	/* NRZ mode */
+		SCCB_WRITE(11, clksrc);	/* main clock source */
+		SCCB_WRITE(12, div);	/* BRG value */
+		SCCB_WRITE(13, 0);	/* BRG high byte */
+		SCCB_WRITE(14, 1);
+		SCCB_WRITE(3, reg3 | 1);
+		SCCB_WRITE(5, reg5 | 8);
+	} else if (port == 0) {
+		(void)scc.cha_a_ctrl;	/* reset reg pointer */
+		SCCA_WRITE(9, 0xc0);	/* reset */
+		LONG_DELAY();		/* extra delay after WR9 access */
+		SCCA_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
 			  0x04 /* 1 stopbit */ |
-			  clkmode );
-	    SCCA_WRITE( 3, reg3 );
-	    SCCA_WRITE( 5, reg5 );
-	    SCCA_WRITE( 9, 0 );		/* no interrupts */
-	    LONG_DELAY();		/* extra delay after WR9 access */
-	    SCCA_WRITE( 10, 0 );	/* NRZ mode */
-	    SCCA_WRITE( 11, clksrc );	/* main clock source */
-	    SCCA_WRITE( 12, div );	/* BRG value */
-	    SCCA_WRITE( 13, 0 );		/* BRG high byte */
-	    SCCA_WRITE( 14, 1 );
-	    SCCA_WRITE( 3, reg3 | 1 );
-	    SCCA_WRITE( 5, reg5 | 8 );
-    }
-
-    mac_SCC_reset_done = 1;
-    mac_SCC_init_done = 1;
+			  clkmode);
+		SCCA_WRITE(3, reg3);
+		SCCA_WRITE(5, reg5);
+		SCCA_WRITE(9, 0);	/* no interrupts */
+		LONG_DELAY();		/* extra delay after WR9 access */
+		SCCA_WRITE(10, 0);	/* NRZ mode */
+		SCCA_WRITE(11, clksrc);	/* main clock source */
+		SCCA_WRITE(12, div);	/* BRG value */
+		SCCA_WRITE(13, 0);	/* BRG high byte */
+		SCCA_WRITE(14, 1);
+		SCCA_WRITE(3, reg3 | 1);
+		SCCA_WRITE(5, reg5 | 8);
+	}
+
+	mac_SCC_reset_done = 1;
+	mac_SCC_init_done = 1;
 }
 #endif /* DEBUG_SERIAL */
 
-void mac_init_scca_port( int cflag )
+void mac_init_scca_port(int cflag)
 {
 	mac_init_scc_port(cflag, 0);
 }
 
-void mac_init_sccb_port( int cflag )
+void mac_init_sccb_port(int cflag)
 {
 	mac_init_scc_port(cflag, 1);
 }
@@ -364,34 +363,26 @@ void mac_init_sccb_port( int cflag )
 void __init mac_debug_init(void)
 {
 #ifdef DEBUG_SERIAL
-    if (   !strcmp( m68k_debug_device, "ser"  )
-        || !strcmp( m68k_debug_device, "ser1" )) {
-	/* Mac modem port */
-	mac_init_scc_port( B9600|CS8, 0 );
-	mac_console_driver.write = mac_scca_console_write;
-	scc_port = 0;
-    }
-    else if (!strcmp( m68k_debug_device, "ser2" )) {
-	/* Mac printer port */
-	mac_init_scc_port( B9600|CS8, 1 );
-	mac_console_driver.write = mac_sccb_console_write;
-	scc_port = 1;
-    }
+	if (!strcmp(m68k_debug_device, "ser") ||
+            !strcmp(m68k_debug_device, "ser1")) {
+		/* Mac modem port */
+		mac_init_scc_port(B9600|CS8, 0);
+		mac_console_driver.write = mac_scca_console_write;
+		scc_port = 0;
+	} else if (!strcmp(m68k_debug_device, "ser2")) {
+		/* Mac printer port */
+		mac_init_scc_port(B9600|CS8, 1);
+		mac_console_driver.write = mac_sccb_console_write;
+		scc_port = 1;
+	}
 #endif
 #ifdef DEBUG_HEADS
-    if (   !strcmp( m68k_debug_device, "scn"  )
-        || !strcmp( m68k_debug_device, "con" )) {
-	/* display, using head.S console routines */
-	mac_console_driver.write = mac_debug_console_write;
-    }
+	if (!strcmp(m68k_debug_device, "scn") ||
+	    !strcmp(m68k_debug_device, "con")) {
+		/* display, using head.S console routines */
+		mac_console_driver.write = mac_debug_console_write;
+	}
 #endif
-    if (mac_console_driver.write)
-	register_console(&mac_console_driver);
+	if (mac_console_driver.write)
+		register_console(&mac_console_driver);
 }
-
-/*
- * Local variables:
- *  c-indent-level: 4
- *  tab-width: 8
- * End:
- */
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 92f873c..4c5b9e4 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -35,35 +35,35 @@
 #include <asm/machdep.h>
 #include <asm/q40_master.h>
 
-extern irqreturn_t q40_process_int (int level, struct pt_regs *regs);
-extern void q40_init_IRQ (void);
+extern irqreturn_t q40_process_int(int level, struct pt_regs *regs);
+extern void q40_init_IRQ(void);
 static void q40_get_model(char *model);
 static int  q40_get_hardware_list(char *buffer);
 extern void q40_sched_init(irq_handler_t handler);
 
-extern unsigned long q40_gettimeoffset (void);
-extern int q40_hwclk (int, struct rtc_time *);
-extern unsigned int q40_get_ss (void);
-extern int q40_set_clock_mmss (unsigned long);
+extern unsigned long q40_gettimeoffset(void);
+extern int q40_hwclk(int, struct rtc_time *);
+extern unsigned int q40_get_ss(void);
+extern int q40_set_clock_mmss(unsigned long);
 static int q40_get_rtc_pll(struct rtc_pll_info *pll);
 static int q40_set_rtc_pll(struct rtc_pll_info *pll);
-extern void q40_reset (void);
+extern void q40_reset(void);
 void q40_halt(void);
 extern void q40_waitbut(void);
-void q40_set_vectors (void);
+void q40_set_vectors(void);
 
-extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/ );
+extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/);
 
 extern char m68k_debug_device[];
 static void q40_mem_console_write(struct console *co, const char *b,
-				    unsigned int count);
+				  unsigned int count);
 
 extern int ql_ticks;
 
 static struct console q40_console_driver = {
-	.name =		"debug",
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
+	.name	= "debug",
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
 };
 
 
@@ -74,150 +74,157 @@ static int _cpleft;
 static void q40_mem_console_write(struct console *co, const char *s,
 				  unsigned int count)
 {
-  char *p=(char *)s;
-
-  if (count<_cpleft)
-    while (count-- >0){
-      *q40_mem_cptr=*p++;
-      q40_mem_cptr+=4;
-      _cpleft--;
-    }
+	const char *p = s;
+
+	if (count < _cpleft) {
+		while (count-- > 0) {
+			*q40_mem_cptr = *p++;
+			q40_mem_cptr += 4;
+			_cpleft--;
+		}
+	}
 }
+
 #if 0
 void printq40(char *str)
 {
-  int l=strlen(str);
-  char *p=q40_mem_cptr;
-
-  while (l-- >0 && _cpleft-- >0)
-    {
-      *p=*str++;
-      p+=4;
-    }
-  q40_mem_cptr=p;
+	int l = strlen(str);
+	char *p = q40_mem_cptr;
+
+	while (l-- > 0 && _cpleft-- > 0) {
+		*p = *str++;
+		p += 4;
+	}
+	q40_mem_cptr = p;
 }
 #endif
 
-static int halted=0;
+static int halted;
 
 #ifdef CONFIG_HEARTBEAT
 static void q40_heartbeat(int on)
 {
-  if (halted) return;
+	if (halted)
+		return;
 
-  if (on)
-    Q40_LED_ON();
-  else
-    Q40_LED_OFF();
+	if (on)
+		Q40_LED_ON();
+	else
+		Q40_LED_OFF();
 }
 #endif
 
 void q40_reset(void)
 {
-        halted=1;
-        printk ("\n\n*******************************************\n"
+        halted = 1;
+        printk("\n\n*******************************************\n"
 		"Called q40_reset : press the RESET button!! \n"
 		"*******************************************\n");
 	Q40_LED_ON();
-	while(1) ;
+	while (1)
+		;
 }
 void q40_halt(void)
 {
-        halted=1;
-        printk ("\n\n*******************\n"
-		    "  Called q40_halt\n"
-		    "*******************\n");
+        halted = 1;
+        printk("\n\n*******************\n"
+		   "  Called q40_halt\n"
+		   "*******************\n");
 	Q40_LED_ON();
-	while(1) ;
+	while (1)
+		;
 }
 
 static void q40_get_model(char *model)
 {
-    sprintf(model, "Q40");
+	sprintf(model, "Q40");
 }
 
 /* No hardware options on Q40? */
 
 static int q40_get_hardware_list(char *buffer)
 {
-    *buffer = '\0';
-    return 0;
+	*buffer = '\0';
+	return 0;
 }
 
-static unsigned int serports[]={0x3f8,0x2f8,0x3e8,0x2e8,0};
+static unsigned int serports[] =
+{
+	0x3f8,0x2f8,0x3e8,0x2e8,0
+};
 void q40_disable_irqs(void)
 {
-  unsigned i,j;
+	unsigned i, j;
 
-  j=0;
-  while((i=serports[j++])) outb(0,i+UART_IER);
-  master_outb(0,EXT_ENABLE_REG);
-  master_outb(0,KEY_IRQ_ENABLE_REG);
+	j = 0;
+	while ((i = serports[j++]))
+		outb(0, i + UART_IER);
+	master_outb(0, EXT_ENABLE_REG);
+	master_outb(0, KEY_IRQ_ENABLE_REG);
 }
 
 void __init config_q40(void)
 {
-    mach_sched_init      = q40_sched_init;
+	mach_sched_init = q40_sched_init;
 
-    mach_init_IRQ        = q40_init_IRQ;
-    mach_gettimeoffset   = q40_gettimeoffset;
-    mach_hwclk           = q40_hwclk;
-    mach_get_ss          = q40_get_ss;
-    mach_get_rtc_pll     = q40_get_rtc_pll;
-    mach_set_rtc_pll     = q40_set_rtc_pll;
-    mach_set_clock_mmss	 = q40_set_clock_mmss;
+	mach_init_IRQ = q40_init_IRQ;
+	mach_gettimeoffset = q40_gettimeoffset;
+	mach_hwclk = q40_hwclk;
+	mach_get_ss = q40_get_ss;
+	mach_get_rtc_pll = q40_get_rtc_pll;
+	mach_set_rtc_pll = q40_set_rtc_pll;
+	mach_set_clock_mmss = q40_set_clock_mmss;
 
-    mach_reset		 = q40_reset;
-    mach_get_model       = q40_get_model;
-    mach_get_hardware_list = q40_get_hardware_list;
+	mach_reset = q40_reset;
+	mach_get_model = q40_get_model;
+	mach_get_hardware_list = q40_get_hardware_list;
 
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
-    mach_beep            = q40_mksound;
+	mach_beep = q40_mksound;
 #endif
 #ifdef CONFIG_HEARTBEAT
-    mach_heartbeat = q40_heartbeat;
+	mach_heartbeat = q40_heartbeat;
 #endif
-    mach_halt = q40_halt;
-
-    /* disable a few things that SMSQ might have left enabled */
-    q40_disable_irqs();
-
-    /* no DMA at all, but ide-scsi requires it.. make sure
-     * all physical RAM fits into the boundary - otherwise
-     * allocator may play costly and useless tricks */
-    mach_max_dma_address = 1024*1024*1024;
-
-    /* useful for early debugging stages - writes kernel messages into SRAM */
-    if (!strncmp( m68k_debug_device,"mem",3 ))
-      {
-	/*printk("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/
-	_cpleft=2000-((long)q40_mem_cptr-0xff020000)/4;
-	q40_console_driver.write = q40_mem_console_write;
-	register_console(&q40_console_driver);
-      }
+	mach_halt = q40_halt;
+
+	/* disable a few things that SMSQ might have left enabled */
+	q40_disable_irqs();
+
+	/* no DMA at all, but ide-scsi requires it.. make sure
+	 * all physical RAM fits into the boundary - otherwise
+	 * allocator may play costly and useless tricks */
+	mach_max_dma_address = 1024*1024*1024;
+
+	/* useful for early debugging stages - writes kernel messages into SRAM */
+	if (!strncmp( m68k_debug_device,"mem", 3)) {
+		/*printk("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/
+		_cpleft = 2000 - ((long)q40_mem_cptr-0xff020000) / 4;
+		q40_console_driver.write = q40_mem_console_write;
+		register_console(&q40_console_driver);
+	}
 }
 
 
 int q40_parse_bootinfo(const struct bi_record *rec)
 {
-  return 1;
+	return 1;
 }
 
 
-static inline unsigned char bcd2bin (unsigned char b)
+static inline unsigned char bcd2bin(unsigned char b)
 {
-	return ((b>>4)*10 + (b&15));
+	return (b >> 4) * 10 + (b & 15);
 }
 
-static inline unsigned char bin2bcd (unsigned char b)
+static inline unsigned char bin2bcd(unsigned char b)
 {
-	return (((b/10)*16) + (b%10));
+	return (b / 10) * 16 + (b % 10);
 }
 
 
-unsigned long q40_gettimeoffset (void)
+unsigned long q40_gettimeoffset(void)
 {
-    return 5000*(ql_ticks!=0);
+	return 5000 * (ql_ticks != 0);
 }
 
 
@@ -238,9 +245,9 @@ unsigned long q40_gettimeoffset (void)
 
 int q40_hwclk(int op, struct rtc_time *t)
 {
-        if (op)
-	{	/* Write.... */
-	        Q40_RTC_CTRL |= Q40_RTC_WRITE;
+	if (op) {
+		/* Write.... */
+		Q40_RTC_CTRL |= Q40_RTC_WRITE;
 
 		Q40_RTC_SECS = bin2bcd(t->tm_sec);
 		Q40_RTC_MINS = bin2bcd(t->tm_min);
@@ -251,25 +258,23 @@ int q40_hwclk(int op, struct rtc_time *t)
 		if (t->tm_wday >= 0)
 			Q40_RTC_DOW = bin2bcd(t->tm_wday+1);
 
-	        Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
-	}
-	else
-	{	/* Read....  */
-	  Q40_RTC_CTRL |= Q40_RTC_READ;
-
-	  t->tm_year = bcd2bin (Q40_RTC_YEAR);
-	  t->tm_mon  = bcd2bin (Q40_RTC_MNTH)-1;
-	  t->tm_mday = bcd2bin (Q40_RTC_DATE);
-	  t->tm_hour = bcd2bin (Q40_RTC_HOUR);
-	  t->tm_min  = bcd2bin (Q40_RTC_MINS);
-	  t->tm_sec  = bcd2bin (Q40_RTC_SECS);
-
-	  Q40_RTC_CTRL &= ~(Q40_RTC_READ);
-
-	  if (t->tm_year < 70)
-	    t->tm_year += 100;
-	  t->tm_wday = bcd2bin(Q40_RTC_DOW)-1;
-
+		Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
+	} else {
+		/* Read....  */
+		Q40_RTC_CTRL |= Q40_RTC_READ;
+
+		t->tm_year = bcd2bin (Q40_RTC_YEAR);
+		t->tm_mon  = bcd2bin (Q40_RTC_MNTH)-1;
+		t->tm_mday = bcd2bin (Q40_RTC_DATE);
+		t->tm_hour = bcd2bin (Q40_RTC_HOUR);
+		t->tm_min  = bcd2bin (Q40_RTC_MINS);
+		t->tm_sec  = bcd2bin (Q40_RTC_SECS);
+
+		Q40_RTC_CTRL &= ~(Q40_RTC_READ);
+
+		if (t->tm_year < 70)
+			t->tm_year += 100;
+		t->tm_wday = bcd2bin(Q40_RTC_DOW)-1;
 	}
 
 	return 0;
@@ -285,29 +290,25 @@ unsigned int q40_get_ss(void)
  * clock is out by > 30 minutes.  Logic lifted from atari code.
  */
 
-int q40_set_clock_mmss (unsigned long nowtime)
+int q40_set_clock_mmss(unsigned long nowtime)
 {
 	int retval = 0;
 	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
 
 	int rtc_minutes;
 
+	rtc_minutes = bcd2bin(Q40_RTC_MINS);
 
-	rtc_minutes = bcd2bin (Q40_RTC_MINS);
-
-	if ((rtc_minutes < real_minutes
-		? real_minutes - rtc_minutes
-			: rtc_minutes - real_minutes) < 30)
-	{
-	        Q40_RTC_CTRL |= Q40_RTC_WRITE;
+	if ((rtc_minutes < real_minutes ?
+	     real_minutes - rtc_minutes :
+	     rtc_minutes - real_minutes) < 30) {
+		Q40_RTC_CTRL |= Q40_RTC_WRITE;
 		Q40_RTC_MINS = bin2bcd(real_minutes);
 		Q40_RTC_SECS = bin2bcd(real_seconds);
 		Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
-	}
-	else
+	} else
 		retval = -1;
 
-
 	return retval;
 }
 
@@ -318,21 +319,23 @@ int q40_set_clock_mmss (unsigned long nowtime)
 
 static int q40_get_rtc_pll(struct rtc_pll_info *pll)
 {
-	int tmp=Q40_RTC_CTRL;
+	int tmp = Q40_RTC_CTRL;
+
 	pll->pll_value = tmp & Q40_RTC_PLL_MASK;
 	if (tmp & Q40_RTC_PLL_SIGN)
 		pll->pll_value = -pll->pll_value;
-	pll->pll_max=31;
-	pll->pll_min=-31;
-	pll->pll_posmult=512;
-	pll->pll_negmult=256;
-	pll->pll_clock=125829120;
+	pll->pll_max = 31;
+	pll->pll_min = -31;
+	pll->pll_posmult = 512;
+	pll->pll_negmult = 256;
+	pll->pll_clock = 125829120;
+
 	return 0;
 }
 
 static int q40_set_rtc_pll(struct rtc_pll_info *pll)
 {
-	if (!pll->pll_ctrl){
+	if (!pll->pll_ctrl) {
 		/* the docs are a bit unclear so I am doublesetting */
 		/* RTC_WRITE here ... */
 		int tmp = (pll->pll_value & 31) | (pll->pll_value<0 ? 32 : 0) |
diff --git a/arch/m68k/sun3x/prom.c b/arch/m68k/sun3x/prom.c
index 574cf06..f23d425 100644
--- a/arch/m68k/sun3x/prom.c
+++ b/arch/m68k/sun3x/prom.c
@@ -34,43 +34,43 @@ e_vector *sun3x_prom_vbr;
 /* Handle returning to the prom */
 void sun3x_halt(void)
 {
-    unsigned long flags;
+	unsigned long flags;
 
-    /* Disable interrupts while we mess with things */
-    local_irq_save(flags);
+	/* Disable interrupts while we mess with things */
+	local_irq_save(flags);
 
-    /* Restore prom vbr */
-    __asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)sun3x_prom_vbr));
+	/* Restore prom vbr */
+	asm volatile ("movec %0,%%vbr" : : "r" ((void*)sun3x_prom_vbr));
 
-    /* Restore prom NMI clock */
-//    sun3x_disable_intreg(5);
-    sun3_enable_irq(7);
+	/* Restore prom NMI clock */
+//	sun3x_disable_intreg(5);
+	sun3_enable_irq(7);
 
-    /* Let 'er rip */
-    __asm__ volatile ("trap #14" : : );
+	/* Let 'er rip */
+	asm volatile ("trap #14");
 
-    /* Restore everything */
-    sun3_disable_irq(7);
-    sun3_enable_irq(5);
+	/* Restore everything */
+	sun3_disable_irq(7);
+	sun3_enable_irq(5);
 
-    __asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)vectors));
-    local_irq_restore(flags);
+	asm volatile ("movec %0,%%vbr" : : "r" ((void*)vectors));
+	local_irq_restore(flags);
 }
 
 void sun3x_reboot(void)
 {
-    /* This never returns, don't bother saving things */
-    local_irq_disable();
+	/* This never returns, don't bother saving things */
+	local_irq_disable();
 
-    /* Restore prom vbr */
-    __asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)sun3x_prom_vbr));
+	/* Restore prom vbr */
+	asm volatile ("movec %0,%%vbr" : : "r" ((void*)sun3x_prom_vbr));
 
-    /* Restore prom NMI clock */
-    sun3_disable_irq(5);
-    sun3_enable_irq(7);
+	/* Restore prom NMI clock */
+	sun3_disable_irq(5);
+	sun3_enable_irq(7);
 
-    /* Let 'er rip */
-    (*romvec->pv_reboot)("vmlinux");
+	/* Let 'er rip */
+	(*romvec->pv_reboot)("vmlinux");
 }
 
 extern char m68k_debug_device[];
@@ -78,54 +78,52 @@ extern char m68k_debug_device[];
 static void sun3x_prom_write(struct console *co, const char *s,
                              unsigned int count)
 {
-    while (count--) {
-        if (*s == '\n')
-            sun3x_putchar('\r');
-        sun3x_putchar(*s++);
-    }
+	while (count--) {
+		if (*s == '\n')
+			sun3x_putchar('\r');
+		sun3x_putchar(*s++);
+	}
 }
 
 /* debug console - write-only */
 
 static struct console sun3x_debug = {
-	.name  =	"debug",
-	.write =	sun3x_prom_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
+	.name	= "debug",
+	.write	= sun3x_prom_write,
+	.flags	= CON_PRINTBUFFER,
+	.index	= -1,
 };
 
 void sun3x_prom_init(void)
 {
-    /* Read the vector table */
-
-    sun3x_putchar = *(void (**)(int)) (SUN3X_P_PUTCHAR);
-    sun3x_getchar = *(int (**)(void)) (SUN3X_P_GETCHAR);
-    sun3x_mayget = *(int (**)(void))  (SUN3X_P_MAYGET);
-    sun3x_mayput = *(int (**)(int))   (SUN3X_P_MAYPUT);
-    sun3x_prom_reboot = *(void (**)(void)) (SUN3X_P_REBOOT);
-    sun3x_prom_abort = *(e_vector *)  (SUN3X_P_ABORT);
-    romvec = (struct linux_romvec *)SUN3X_PROM_BASE;
-
-    idprom_init();
-
-    if(!((idprom->id_machtype & SM_ARCH_MASK) == SM_SUN3X)) {
-	    printk("Warning: machine reports strange type %02x\n",
-		   idprom->id_machtype);
-	    printk("Pretending it's a 3/80, but very afraid...\n");
-	    idprom->id_machtype = SM_SUN3X | SM_3_80;
-    }
-
-    /* point trap #14 at abort.
-     * XXX this is futile since we restore the vbr first - oops
-     */
-    vectors[VEC_TRAP14] = sun3x_prom_abort;
-
-    /* If debug=prom was specified, start the debug console */
-
-    if (!strcmp(m68k_debug_device, "prom"))
-        register_console(&sun3x_debug);
-
-
+	/* Read the vector table */
+
+	sun3x_putchar = *(void (**)(int)) (SUN3X_P_PUTCHAR);
+	sun3x_getchar = *(int (**)(void)) (SUN3X_P_GETCHAR);
+	sun3x_mayget = *(int (**)(void))  (SUN3X_P_MAYGET);
+	sun3x_mayput = *(int (**)(int))   (SUN3X_P_MAYPUT);
+	sun3x_prom_reboot = *(void (**)(void)) (SUN3X_P_REBOOT);
+	sun3x_prom_abort = *(e_vector *)  (SUN3X_P_ABORT);
+	romvec = (struct linux_romvec *)SUN3X_PROM_BASE;
+
+	idprom_init();
+
+	if (!((idprom->id_machtype & SM_ARCH_MASK) == SM_SUN3X)) {
+		printk("Warning: machine reports strange type %02x\n",
+			idprom->id_machtype);
+		printk("Pretending it's a 3/80, but very afraid...\n");
+		idprom->id_machtype = SM_SUN3X | SM_3_80;
+	}
+
+	/* point trap #14 at abort.
+	 * XXX this is futile since we restore the vbr first - oops
+	 */
+	vectors[VEC_TRAP14] = sun3x_prom_abort;
+
+	/* If debug=prom was specified, start the debug console */
+
+	if (!strcmp(m68k_debug_device, "prom"))
+		register_console(&sun3x_debug);
 }
 
 /* some prom functions to export */
@@ -141,7 +139,6 @@ int prom_getbool (int node, char *prop)
 
 void prom_printf(char *fmt, ...)
 {
-
 }
 
 void prom_halt (void)
@@ -159,7 +156,7 @@ prom_get_idprom(char *idbuf, int num_bytes)
         int i;
 
 	/* make a copy of the idprom structure */
-	for(i = 0; i < num_bytes; i++)
+	for (i = 0; i < num_bytes; i++)
 		idbuf[i] = ((char *)SUN3X_IDPROM)[i];
 
         return idbuf[0];