diff options
| author | Ben Dooks <ben-linux@fluff.org> | 2010-05-19 18:04:08 +0900 |
|---|---|---|
| committer | Ben Dooks <ben-linux@fluff.org> | 2010-05-19 18:04:08 +0900 |
| commit | ff1b8ba01dc80da338890a187c112fdd3c0b9202 (patch) | |
| tree | 415999aa2c3ac52e48c2b6f690bba393e3d7a00c | |
| parent | 5fcdb16bd04fdeb313ee33bb269b04e59a9abf91 (diff) | |
| parent | 32b6cb3872883861f3a2669cce880f3a7ef8979a (diff) | |
| download | kernel_goldelico_gta04-ff1b8ba01dc80da338890a187c112fdd3c0b9202.zip kernel_goldelico_gta04-ff1b8ba01dc80da338890a187c112fdd3c0b9202.tar.gz kernel_goldelico_gta04-ff1b8ba01dc80da338890a187c112fdd3c0b9202.tar.bz2 | |
ARM: Merge for-2635/gpio2
Merge branch 'for-2635/gpio2' into for-linus/samsung2
40 files changed, 531 insertions, 342 deletions
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 163b60e..a4c0b3f 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -6,6 +6,7 @@ config CPU_S3C2410 bool depends on ARCH_S3C2410 select CPU_ARM920T + select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index a3f3c7b..8cdeb14 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -33,14 +33,15 @@ static void h1940bt_enable(int on) h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER); /* Reset the chip */ mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH(1), 1); + + gpio_set_value(S3C2410_GPH(1), 1); mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH(1), 0); + gpio_set_value(S3C2410_GPH(1), 0); } else { - s3c2410_gpio_setpin(S3C2410_GPH(1), 1); + gpio_set_value(S3C2410_GPH(1), 1); mdelay(10); - s3c2410_gpio_setpin(S3C2410_GPH(1), 0); + gpio_set_value(S3C2410_GPH(1), 0); mdelay(10); h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0); } @@ -61,15 +62,21 @@ static int __devinit h1940bt_probe(struct platform_device *pdev) struct rfkill *rfk; int ret = 0; + ret = gpio_request(S3C2410_GPH(1), dev_name(&pdev->dev)); + if (ret) { + dev_err(&pdev->dev, "could not get GPH1\n");\ + return ret; + } + /* Configures BT serial port GPIOs */ - s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); - s3c2410_gpio_pullup(S3C2410_GPH(0), 1); - s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_pullup(S3C2410_GPH(1), 1); - s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); - s3c2410_gpio_pullup(S3C2410_GPH(2), 1); - s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); - s3c2410_gpio_pullup(S3C2410_GPH(3), 1); + s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0); + s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0); + s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0); + s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE); rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH, @@ -100,6 +107,7 @@ static int h1940bt_remove(struct platform_device *pdev) struct rfkill *rfk = platform_get_drvdata(pdev); platform_set_drvdata(pdev, NULL); + gpio_free(S3C2410_GPH(1)); if (rfk) { rfkill_unregister(rfk); diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index 035a493..f453c4f 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -10,14 +10,28 @@ * published by the Free Software Foundation. */ +#ifndef __MACH_GPIO_FNS_H +#define __MACH_GPIO_FNS_H __FILE__ + /* These functions are in the to-be-removed category and it is strongly * encouraged not to use these in new code. They will be marked deprecated * very soon. * * Most of the functionality can be either replaced by the gpiocfg calls * for the s3c platform or by the generic GPIOlib API. + * + * As of 2.6.35-rc, these will be removed, with the few drivers using them + * either replaced or given a wrapper until the calls can be removed. */ +#include <plat/gpio-cfg.h> + +static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg) +{ + /* 1:1 mapping between cfgpin and setcfg calls at the moment */ + s3c_gpio_cfgpin(pin, cfg); +} + /* external functions for GPIO support * * These allow various different clients to access the same GPIO @@ -25,17 +39,6 @@ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. */ -/* s3c2410_gpio_cfgpin - * - * set the configuration of the given pin to the value passed. - * - * eg: - * s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0); - * s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1); -*/ - -extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); - extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); /* s3c2410_gpio_getirq @@ -73,6 +76,14 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, /* s3c2410_gpio_pullup * + * This call should be replaced with s3c_gpio_setpull(). + * + * As a note, there is currently no distinction between pull-up and pull-down + * in the s3c24xx series devices with only an on/off configuration. + */ + +/* s3c2410_gpio_pullup + * * configure the pull-up control on the given pin * * to = 1 => disable the pull-up @@ -86,18 +97,8 @@ extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); -/* s3c2410_gpio_getpull - * - * Read the state of the pull-up on a given pin - * - * return: - * < 0 => error code - * 0 => enabled - * 1 => disabled -*/ - -extern int s3c2410_gpio_getpull(unsigned int pin); - extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); extern unsigned int s3c2410_gpio_getpin(unsigned int pin); + +#endif /* __MACH_GPIO_FNS_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h index 2edbb9c..4f7bf32 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h @@ -16,15 +16,28 @@ #define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) -#define S3C2410_GPIO_BANKA (32*0) -#define S3C2410_GPIO_BANKB (32*1) -#define S3C2410_GPIO_BANKC (32*2) -#define S3C2410_GPIO_BANKD (32*3) -#define S3C2410_GPIO_BANKE (32*4) -#define S3C2410_GPIO_BANKF (32*5) #define S3C2410_GPIO_BANKG (32*6) #define S3C2410_GPIO_BANKH (32*7) +/* GPIO sizes for various SoCs: + * + * 2442 + * 2410 2412 2440 2443 2416 + * ---- ---- ---- ---- ---- + * A 23 22 25 16 25 + * B 11 11 11 11 9 + * C 16 15 16 16 16 + * D 16 16 16 16 16 + * E 16 16 16 16 16 + * F 8 8 8 8 8 + * G 16 16 16 16 8 + * H 11 11 9 15 15 + * J -- -- 13 16 -- + * K -- -- -- -- 16 + * L -- -- -- 15 7 + * M -- -- -- 2 2 + */ + /* GPIO bank sizes */ #define S3C2410_GPIO_A_NR (32) #define S3C2410_GPIO_B_NR (32) @@ -34,6 +47,10 @@ #define S3C2410_GPIO_F_NR (32) #define S3C2410_GPIO_G_NR (32) #define S3C2410_GPIO_H_NR (32) +#define S3C2410_GPIO_J_NR (32) /* technically 16. */ +#define S3C2410_GPIO_K_NR (32) /* technically 16. */ +#define S3C2410_GPIO_L_NR (32) /* technically 15. */ +#define S3C2410_GPIO_M_NR (32) /* technically 2. */ #if CONFIG_S3C_GPIO_SPACE != 0 #error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment @@ -53,6 +70,10 @@ enum s3c_gpio_number { S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E), S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F), S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G), + S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H), + S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J), + S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K), + S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L), }; #endif /* __ASSEMBLY__ */ @@ -67,6 +88,10 @@ enum s3c_gpio_number { #define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr)) #define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr)) #define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr)) +#define S3C2410_GPJ(_nr) (S3C2410_GPIO_J_START + (_nr)) +#define S3C2410_GPK(_nr) (S3C2410_GPIO_K_START + (_nr)) +#define S3C2410_GPL(_nr) (S3C2410_GPIO_L_START + (_nr)) +#define S3C2410_GPM(_nr) (S3C2410_GPIO_M_START + (_nr)) /* compatibility until drivers can be modified */ diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h index acb2591..d67819d 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h @@ -23,11 +23,11 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) { struct s3c_gpio_chip *chip; - if (pin > S3C2410_GPG(10)) + if (pin > S3C_GPIO_END) return NULL; chip = &s3c24xx_gpios[pin/32]; - return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL; + return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL; } #endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h index 15f0b3e..b649bf2 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h @@ -20,10 +20,18 @@ * devices that need GPIO. */ +#ifdef CONFIG_CPU_S3C244X +#define ARCH_NR_GPIOS (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA) +#else #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) +#endif #include <asm-generic/gpio.h> #include <mach/gpio-nrs.h> #include <mach/gpio-fns.h> +#ifdef CONFIG_CPU_S3C24XX +#define S3C_GPIO_END (S3C2410_GPIO_BANKJ + 32) +#else #define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32) +#endif diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index fd672f3..95e29fe 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -17,29 +17,11 @@ #include <mach/gpio-nrs.h> #ifdef CONFIG_CPU_S3C2400 -#define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x) -#define S3C24XX_MISCCR S3C2400_MISCCR +#define S3C24XX_MISCCR S3C2400_MISCCR #else -#define S3C24XX_GPIO_BASE(x) S3C2410_GPIO_BASE(x) -#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) +#define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) #endif /* CONFIG_CPU_S3C2400 */ - -/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */ - -#define S3C2400_BANKNUM(pin) (((pin) & ~31) / 32) -#define S3C2400_BASEA2B(pin) ((((pin) & ~31) >> 2)) -#define S3C2400_BASEC2H(pin) ((S3C2400_BANKNUM(pin) * 10) + \ - (2 * (S3C2400_BANKNUM(pin)-2))) - -#define S3C2400_GPIO_BASE(pin) (pin < S3C2410_GPIO_BANKC ? \ - S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \ - S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO) - - -#define S3C2410_GPIO_BASE(pin) ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO) -#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31) - /* general configuration options */ #define S3C2410_GPIO_LEAVE (0xFFFFFFFF) @@ -639,6 +621,23 @@ * for the 2412/2413 from the 2410/2440/2442 */ +/* S3C2443 and above */ +#define S3C2440_GPJCON S3C2410_GPIOREG(0xD0) +#define S3C2440_GPJDAT S3C2410_GPIOREG(0xD4) +#define S3C2440_GPJUP S3C2410_GPIOREG(0xD8) + +#define S3C2443_GPKCON S3C2410_GPIOREG(0xE0) +#define S3C2443_GPKDAT S3C2410_GPIOREG(0xE4) +#define S3C2443_GPKUP S3C2410_GPIOREG(0xE8) + +#define S3C2443_GPLCON S3C2410_GPIOREG(0xF0) +#define S3C2443_GPLDAT S3C2410_GPIOREG(0xF4) +#define S3C2443_GPLUP S3C2410_GPIOREG(0xF8) + +#define S3C2443_GPMCON S3C2410_GPIOREG(0x100) +#define S3C2443_GPMDAT S3C2410_GPIOREG(0x104) +#define S3C2443_GPMUP S3C2410_GPIOREG(0x108) + /* miscellaneous control */ #define S3C2400_MISCCR S3C2410_GPIOREG(0x54) #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h index 1202ca5..19575e0 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h @@ -22,85 +22,49 @@ * pull up works like all other ports. */ -#define S3C2440_GPIO_BANKJ (416) - -#define S3C2440_GPJCON S3C2410_GPIOREG(0xd0) -#define S3C2440_GPJDAT S3C2410_GPIOREG(0xd4) -#define S3C2440_GPJUP S3C2410_GPIOREG(0xd8) - #define S3C2413_GPJCON S3C2410_GPIOREG(0x80) #define S3C2413_GPJDAT S3C2410_GPIOREG(0x84) #define S3C2413_GPJUP S3C2410_GPIOREG(0x88) #define S3C2413_GPJSLPCON S3C2410_GPIOREG(0x8C) -#define S3C2440_GPJ0 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0) -#define S3C2440_GPJ0_INP (0x00 << 0) #define S3C2440_GPJ0_OUTP (0x01 << 0) #define S3C2440_GPJ0_CAMDATA0 (0x02 << 0) -#define S3C2440_GPJ1 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1) -#define S3C2440_GPJ1_INP (0x00 << 2) #define S3C2440_GPJ1_OUTP (0x01 << 2) #define S3C2440_GPJ1_CAMDATA1 (0x02 << 2) -#define S3C2440_GPJ2 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2) -#define S3C2440_GPJ2_INP (0x00 << 4) #define S3C2440_GPJ2_OUTP (0x01 << 4) #define S3C2440_GPJ2_CAMDATA2 (0x02 << 4) -#define S3C2440_GPJ3 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3) -#define S3C2440_GPJ3_INP (0x00 << 6) #define S3C2440_GPJ3_OUTP (0x01 << 6) #define S3C2440_GPJ3_CAMDATA3 (0x02 << 6) -#define S3C2440_GPJ4 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4) -#define S3C2440_GPJ4_INP (0x00 << 8) #define S3C2440_GPJ4_OUTP (0x01 << 8) #define S3C2440_GPJ4_CAMDATA4 (0x02 << 8) -#define S3C2440_GPJ5 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5) -#define S3C2440_GPJ5_INP (0x00 << 10) #define S3C2440_GPJ5_OUTP (0x01 << 10) #define S3C2440_GPJ5_CAMDATA5 (0x02 << 10) -#define S3C2440_GPJ6 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6) -#define S3C2440_GPJ6_INP (0x00 << 12) #define S3C2440_GPJ6_OUTP (0x01 << 12) #define S3C2440_GPJ6_CAMDATA6 (0x02 << 12) -#define S3C2440_GPJ7 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7) -#define S3C2440_GPJ7_INP (0x00 << 14) #define S3C2440_GPJ7_OUTP (0x01 << 14) #define S3C2440_GPJ7_CAMDATA7 (0x02 << 14) -#define S3C2440_GPJ8 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8) -#define S3C2440_GPJ8_INP (0x00 << 16) #define S3C2440_GPJ8_OUTP (0x01 << 16) #define S3C2440_GPJ8_CAMPCLK (0x02 << 16) -#define S3C2440_GPJ9 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9) -#define S3C2440_GPJ9_INP (0x00 << 18) #define S3C2440_GPJ9_OUTP (0x01 << 18) #define S3C2440_GPJ9_CAMVSYNC (0x02 << 18) -#define S3C2440_GPJ10 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10) -#define S3C2440_GPJ10_INP (0x00 << 20) #define S3C2440_GPJ10_OUTP (0x01 << 20) #define S3C2440_GPJ10_CAMHREF (0x02 << 20) -#define S3C2440_GPJ11 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11) -#define S3C2440_GPJ11_INP (0x00 << 22) #define S3C2440_GPJ11_OUTP (0x01 << 22) #define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22) -#define S3C2440_GPJ12 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12) -#define S3C2440_GPJ12_INP (0x00 << 24) #define S3C2440_GPJ12_OUTP (0x01 << 24) #define S3C2440_GPJ12_CAMRESET (0x02 << 24) -#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13) -#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14) -#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15) - #endif /* __ASM_ARCH_REGS_GPIOJ_H */ diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 7047317..34fc05a 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -56,6 +56,7 @@ #include <plat/iic.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/gpio-cfg.h> #ifdef CONFIG_MTD_PARTITIONS @@ -225,8 +226,8 @@ static void amlm5900_init_pm(void) } else { enable_irq_wake(IRQ_EINT9); /* configure the suspend/resume status pin */ - s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_pullup(S3C2410_GPF(2), 0); + s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); + s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP); } } static void __init amlm5900_init(void) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index c8786df..c1f90f6 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -61,6 +61,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> +#include <plat/gpio-cfg.h> #include <plat/audio-simtec.h> #include "usb-simtec.h" @@ -216,15 +217,13 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = { static int bast_pm_suspend(struct sys_device *sd, pm_message_t state) { /* ensure that an nRESET is not generated on resume. */ - s3c2410_gpio_setpin(S3C2410_GPA(21), 1); - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); - + gpio_direction_output(S3C2410_GPA(21), 1); return 0; } static int bast_pm_resume(struct sys_device *sd) { - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); return 0; } @@ -658,6 +657,8 @@ static void __init bast_init(void) nor_simtec_init(); simtec_audio_add(NULL, true, &bast_audio); + WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset")); + s3c_cpufreq_setboard(&bast_cpufreq); } diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 03028b9..d2a2fad 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -50,6 +50,7 @@ #include <plat/udc.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -207,16 +208,16 @@ static int h1940_backlight_init(struct device *dev) { gpio_request(S3C2410_GPB(0), "Backlight"); - s3c2410_gpio_setpin(S3C2410_GPB(0), 0); - s3c2410_gpio_pullup(S3C2410_GPB(0), 0); - s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); + gpio_direction_output(S3C2410_GPB(0), 0); + s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); return 0; } static void h1940_backlight_exit(struct device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/); + gpio_direction_output(S3C2410_GPB(0), 1); } static struct platform_pwm_backlight_data backlight_data = { @@ -245,18 +246,18 @@ static void h1940_lcd_power_set(struct plat_lcd_data *pd, if (!power) { /* set to 3ec */ - s3c2410_gpio_setpin(S3C2410_GPC(0), 0); + gpio_direction_output(S3C2410_GPC(0), 0); /* wait for 3ac */ do { - value = s3c2410_gpio_getpin(S3C2410_GPC(6)); + value = gpio_get_value(S3C2410_GPC(6)); } while (value); /* set to 38c */ - s3c2410_gpio_setpin(S3C2410_GPC(5), 0); + gpio_direction_output(S3C2410_GPC(5), 0); } else { /* Set to 3ac */ - s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + gpio_direction_output(S3C2410_GPC(5), 1); /* Set to 3ad */ - s3c2410_gpio_setpin(S3C2410_GPC(0), 1); + gpio_direction_output(S3C2410_GPC(0), 1); } } @@ -333,6 +334,7 @@ static void __init h1940_init(void) gpio_request(S3C2410_GPC(5), "LCD power"); gpio_request(S3C2410_GPC(6), "LCD power"); + gpio_direction_input(S3C2410_GPC(6)); platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); } diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 9e2565a..41f299d 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -596,6 +596,9 @@ static void __init n30_init(void) platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices)); } + + WARN_ON(gpio_request(S3C2410_GPB(3), "udc pup")); + gpio_direction_output(S3C2410_GPB(3), 0); } MACHINE_START(N30, "Acer-N30") diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 92a4ec3..d0e87b6 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -58,6 +58,7 @@ #include <plat/iic.h> #include <plat/common-smdk.h> +#include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> @@ -219,10 +220,10 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) { switch (cs) { case BITBANG_CS_ACTIVE: - s3c2410_gpio_setpin(S3C2410_GPB(5), 0); + gpio_set_value(S3C2410_GPB(5), 0); break; case BITBANG_CS_INACTIVE: - s3c2410_gpio_setpin(S3C2410_GPB(5), 1); + gpio_set_value(S3C2410_GPB(5), 1); break; } } @@ -347,13 +348,14 @@ static void __init qt2410_machine_init(void) } s3c24xx_fb_set_platdata(&qt2410_fb_info); - s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPB(0), 1); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); s3c_i2c0_set_platdata(NULL); - s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPB(5), "spi cs")); + gpio_direction_output(S3C2410_GPB(5), 1); platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); s3c_pm_init(); diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 9051f0d..d540d79 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -357,8 +357,7 @@ static struct clk *vr1000_clocks[] __initdata = { static void vr1000_power_off(void) { - s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_setpin(S3C2410_GPB(9), 1); + gpio_direction_output(S3C2410_GPB(9), 1); } static void __init vr1000_map_io(void) @@ -395,6 +394,8 @@ static void __init vr1000_init(void) nor_simtec_init(); simtec_audio_add(NULL, true, NULL); + + WARN_ON(gpio_request(S3C2410_GPB(9), "power off")); } MACHINE_START(VR1000, "Thorcom-VR1000") diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 91ba42f..adc90a3 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/gpio.h> #include <linux/clk.h> #include <linux/sysdev.h> #include <linux/serial_core.h> @@ -40,6 +41,10 @@ #include <plat/clock.h> #include <plat/pll.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + /* Initial IO mappings */ static struct map_desc s3c2410_iodesc[] __initdata = { @@ -65,6 +70,9 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2410_map_io(void) { + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); } diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c index f7afece..3404a87 100644 --- a/arch/arm/mach-s3c2412/gpio.c +++ b/arch/arm/mach-s3c2412/gpio.c @@ -16,41 +16,43 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/interrupt.h> +#include <linux/gpio.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/regs-gpio.h> - #include <mach/hardware.h> +#include <plat/gpio-core.h> + int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long offs = pin - chip->chip.base; unsigned long flags; unsigned long slpcon; offs *= 2; - if (pin < S3C2410_GPIO_BANKB) + if (pin < S3C2410_GPB(0)) return -EINVAL; - if (pin >= S3C2410_GPIO_BANKF && - pin <= S3C2410_GPIO_BANKG) + if (pin >= S3C2410_GPF(0) && + pin <= S3C2410_GPG(16)) return -EINVAL; - if (pin > (S3C2410_GPIO_BANKH + 32)) + if (pin > S3C2410_GPH(16)) return -EINVAL; local_irq_save(flags); - slpcon = __raw_readl(base + 0x0C); + slpcon = __raw_readl(chip->base + 0x0C); slpcon &= ~(3 << offs); slpcon |= state << offs; - __raw_writel(slpcon, base + 0x0C); + __raw_writel(slpcon, chip->base + 0x0C); local_irq_restore(flags); diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 20647f0..478f4b4 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -48,6 +48,7 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -357,8 +358,7 @@ static void jive_lcm_reset(unsigned int set) { printk(KERN_DEBUG "%s(%d)\n", __func__, set); - s3c2410_gpio_setpin(S3C2410_GPG(13), set); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT); + gpio_set_value(S3C2410_GPG(13), set); } #undef LCD_UPPER_MARGIN @@ -391,7 +391,7 @@ static struct ili9320_platdata jive_lcm_config = { static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs) { - s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1); + gpio_set_value(S3C2410_GPB(7), cs ? 0 : 1); } static struct s3c2410_spigpio_info jive_lcd_spi = { @@ -413,7 +413,7 @@ static struct platform_device jive_device_lcdspi = { static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs) { - s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1); + gpio_set_value(S3C2410_GPH(10), cs ? 0 : 1); } static struct s3c2410_spigpio_info jive_wm8750_spi = { @@ -531,7 +531,7 @@ static void jive_power_off(void) printk(KERN_INFO "powering system down...\n"); s3c2410_gpio_setpin(S3C2410_GPC(5), 1); - s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); } static void __init jive_machine_init(void) @@ -636,22 +636,22 @@ static void __init jive_machine_init(void) /* initialise the spi */ - s3c2410_gpio_setpin(S3C2410_GPG(13), 0); - s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT); + gpio_request(S3C2410_GPG(13), "lcm reset"); + gpio_direction_output(S3C2410_GPG(13), 0); - s3c2410_gpio_setpin(S3C2410_GPB(7), 1); - s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT); + gpio_request(S3C2410_GPB(7), "jive spi"); + gpio_direction_output(S3C2410_GPB(7), 1); s3c2410_gpio_setpin(S3C2410_GPB(6), 0); - s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPG(8), 1); - s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT); /* initialise the WM8750 spi */ - s3c2410_gpio_setpin(S3C2410_GPH(10), 1); - s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT); + gpio_request(S3C2410_GPH(10), "jive wm8750 spi"); + gpio_direction_output(S3C2410_GPH(10), 1); /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index 3d41aa7..ba93a35 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -85,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPF(2), 1); + gpio_set_value(S3C2410_GPF(2), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); + gpio_set_value(S3C2410_GPF(2), 0); break; case S3C2410_UDC_P_RESET : break; @@ -134,8 +134,8 @@ static void __init smdk2413_machine_init(void) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ - s3c2410_gpio_setpin(S3C2410_GPF(2), 0); - s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPF(2), "udc pull")); + gpio_direction_output(S3C2410_GPF(2), 0); s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | S3C2410_MISCCR_USBSUSPND0 | diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index a6c5df6..cd8e7de 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -6,6 +6,7 @@ config CPU_S3C2440 bool depends on ARCH_S3C2410 select CPU_ARM920T + select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM select S3C2410_GPIO diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 571b176..a76bcda 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -53,6 +53,7 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -102,10 +103,10 @@ static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + gpio_set_value(S3C2410_GPC(5), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPC(5), 0); + gpio_set_value(S3C2410_GPC(5), 0); break; case S3C2410_UDC_P_RESET : break; @@ -632,25 +633,25 @@ static void __init mini2440_init(void) mini2440_parse_features(&features, mini2440_features_str); /* turn LCD on */ - s3c2410_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); + s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); /* Turn the backlight early on */ - s3c2410_gpio_setpin(S3C2410_GPG(4), 1); - s3c2410_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPG(4), "backlight")); + gpio_direction_output(S3C2410_GPG(4), 1); /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ - s3c2410_gpio_pullup(S3C2410_GPB(1), 0); + s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); s3c2410_gpio_setpin(S3C2410_GPB(1), 0); - s3c2410_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); /* Make sure the D+ pullup pin is output */ - s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup")); + gpio_direction_output(S3C2410_GPC(5), 0); /* mark the key as input, without pullups (there is one on the board) */ for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { - s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0); - s3c2410_gpio_cfgpin(mini2440_buttons[i].gpio, - S3C2410_GPIO_INPUT); + s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT); } if (features.lcd_index != -1) { int li; diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index 3420415..3ff62de 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -40,6 +40,7 @@ #include <plat/regs-serial.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> #include <plat/s3c2410.h> #include <plat/s3c244x.h> #include <plat/clock.h> @@ -122,15 +123,15 @@ static void __init nexcoder_sensorboard_init(void) { // Initialize SCCB bus s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL - s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA - s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT); // Power up the sensor board s3c2410_gpio_setpin(S3C2410_GPF(1), 1); - s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN + s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN s3c2410_gpio_setpin(S3C2410_GPF(2), 0); - s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN + s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN } static void __init nexcoder_map_io(void) diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index f35371d..319458d 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -49,6 +49,7 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> +#include <plat/gpio-cfg.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -298,7 +299,7 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state) /* ensure that an nRESET is not generated on resume. */ s3c2410_gpio_setpin(S3C2410_GPA(21), 1); - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT); return 0; } @@ -310,7 +311,7 @@ static int osiris_pm_resume(struct sys_device *sd) __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0); - s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); + s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT); return 0; } diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index 2b68f7e..d50f3ae 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/sysdev.h> +#include <linux/gpio.h> #include <linux/clk.h> #include <linux/io.h> @@ -33,6 +34,10 @@ #include <plat/cpu.h> #include <plat/s3c244x.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + static struct sys_device s3c2440_sysdev = { .cls = &s3c2440_sysclass, }; @@ -41,6 +46,9 @@ int __init s3c2440_init(void) { printk("S3C2440: Initialising architecture\n"); + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + /* change irq for watchdog */ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c index 66e6794..60c929a 100644 --- a/arch/arm/mach-s3c64xx/gpiolib.c +++ b/arch/arm/mach-s3c64xx/gpiolib.c @@ -51,6 +51,7 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -58,12 +59,14 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { .cfg_eint = 7, .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { .cfg_eint = 3, + .get_config = s3c_gpio_getcfg_s3c64xx_4bit, .set_config = s3c_gpio_setcfg_s3c64xx_4bit, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, @@ -171,6 +174,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = { static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -178,6 +182,7 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { .cfg_eint = 2, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; @@ -185,6 +190,7 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { .cfg_eint = 3, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, .set_pull = s3c_gpio_setpull_updown, .get_pull = s3c_gpio_getpull_updown, }; diff --git a/arch/arm/mach-s5p6440/gpio.c b/arch/arm/mach-s5p6440/gpio.c index b0ea741..262dc75 100644 --- a/arch/arm/mach-s5p6440/gpio.c +++ b/arch/arm/mach-s5p6440/gpio.c @@ -161,12 +161,15 @@ static struct s3c_gpio_cfg s5p6440_gpio_cfgs[] = { }, { .cfg_eint = 0, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, { .cfg_eint = 2, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, { .cfg_eint = 3, .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, }, }; @@ -279,6 +282,8 @@ void __init s5p6440_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips) for (; nr_chips > 0; nr_chips--, chipcfg++) { if (!chipcfg->set_config) chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit; + if (!chipcfg->get_config) + chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit; if (!chipcfg->set_pull) chipcfg->set_pull = s3c_gpio_setpull_updown; if (!chipcfg->get_pull) diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 6e93ef8..a830fad 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -9,6 +9,7 @@ config PLAT_S3C24XX select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_DEVICE_NAND + select S3C_GPIO_CFG_S3C24XX help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 9e0e20a..7b44d0c 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -42,6 +42,7 @@ #include <plat/nand.h> #include <plat/common-smdk.h> +#include <plat/gpio-cfg.h> #include <plat/devs.h> #include <plat/pm.h> @@ -185,10 +186,10 @@ void __init smdk_machine_init(void) { /* Configure the LEDs (even if we have no LED support)*/ - s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT); + s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT); s3c2410_gpio_setpin(S3C2410_GPF(4), 1); s3c2410_gpio_setpin(S3C2410_GPF(5), 1); diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 5467470..2f3d7c0 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/gpio.c * - * Copyright (c) 2004-2005 Simtec Electronics + * Copyright (c) 2004-2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * S3C24XX GPIO support @@ -20,12 +20,12 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - #include <linux/kernel.h> #include <linux/init.h> #include <linux/module.h> #include <linux/interrupt.h> #include <linux/ioport.h> +#include <linux/gpio.h> #include <linux/io.h> #include <mach/hardware.h> @@ -34,133 +34,46 @@ #include <mach/regs-gpio.h> -void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long mask; - unsigned long con; - unsigned long flags; +#include <plat/gpio-core.h> - if (pin < S3C2410_GPIO_BANKB) { - mask = 1 << S3C2410_GPIO_OFFSET(pin); - } else { - mask = 3 << S3C2410_GPIO_OFFSET(pin)*2; - } - - switch (function) { - case S3C2410_GPIO_LEAVE: - mask = 0; - function = 0; - break; - - case S3C2410_GPIO_INPUT: - case S3C2410_GPIO_OUTPUT: - case S3C2410_GPIO_SFN2: - case S3C2410_GPIO_SFN3: - if (pin < S3C2410_GPIO_BANKB) { - function -= 1; - function &= 1; - function <<= S3C2410_GPIO_OFFSET(pin); - } else { - function &= 3; - function <<= S3C2410_GPIO_OFFSET(pin)*2; - } - } - - /* modify the specified register wwith IRQs off */ - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - con &= ~mask; - con |= function; - - __raw_writel(con, base + 0x00); - - local_irq_restore(flags); -} - -EXPORT_SYMBOL(s3c2410_gpio_cfgpin); - -unsigned int s3c2410_gpio_getcfg(unsigned int pin) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long val = __raw_readl(base); - - if (pin < S3C2410_GPIO_BANKB) { - val >>= S3C2410_GPIO_OFFSET(pin); - val &= 1; - val += 1; - } else { - val >>= S3C2410_GPIO_OFFSET(pin)*2; - val &= 3; - } - - return val | S3C2410_GPIO_INPUT; -} - -EXPORT_SYMBOL(s3c2410_gpio_getcfg); +/* gpiolib wrappers until these are totally eliminated */ void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); - unsigned long flags; - unsigned long up; + int ret; - if (pin < S3C2410_GPIO_BANKB) - return; + WARN_ON(to); /* should be none of these left */ - local_irq_save(flags); - - up = __raw_readl(base + 0x08); - up &= ~(1L << offs); - up |= to << offs; - __raw_writel(up, base + 0x08); + if (!to) { + /* if pull is enabled, try first with up, and if that + * fails, try using down */ - local_irq_restore(flags); + ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); + if (ret) + s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); + } else { + s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); + } } - EXPORT_SYMBOL(s3c2410_gpio_pullup); -int s3c2410_gpio_getpull(unsigned int pin) -{ - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); - - if (pin < S3C2410_GPIO_BANKB) - return -EINVAL; - - return (__raw_readl(base + 0x08) & (1L << offs)) ? 1 : 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_getpull); - void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); - unsigned long flags; - unsigned long dat; + /* do this via gpiolib until all users removed */ - local_irq_save(flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offs); - dat |= to << offs; - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); + gpio_request(pin, "temporary"); + gpio_set_value(pin, to); + gpio_free(pin); } EXPORT_SYMBOL(s3c2410_gpio_setpin); unsigned int s3c2410_gpio_getpin(unsigned int pin) { - void __iomem *base = S3C24XX_GPIO_BASE(pin); - unsigned long offs = S3C2410_GPIO_OFFSET(pin); + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long offs = pin - chip->chip.base; - return __raw_readl(base + 0x04) & (1<< offs); + return __raw_readl(chip->base + 0x04) & (1<< offs); } EXPORT_SYMBOL(s3c2410_gpio_getpin); @@ -181,22 +94,3 @@ unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) } EXPORT_SYMBOL(s3c2410_modify_misccr); - -int s3c2410_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15)) - return -EINVAL; /* not valid interrupts */ - - if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7)) - return -EINVAL; /* not valid pin */ - - if (pin < S3C2410_GPF(4)) - return (pin - S3C2410_GPF(0)) + IRQ_EINT0; - - if (pin < S3C2410_GPG(0)) - return (pin - S3C2410_GPF(4)) + IRQ_EINT4; - - return (pin - S3C2410_GPG(0)) + IRQ_EINT8; -} - -EXPORT_SYMBOL(s3c2410_gpio_getirq); diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 4f0f11a..4c0896f 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/gpiolib.c * - * Copyright (c) 2008 Simtec Electronics + * Copyright (c) 2008-2010 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * @@ -21,6 +21,8 @@ #include <linux/gpio.h> #include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> #include <mach/hardware.h> #include <asm/irq.h> #include <plat/pm.h> @@ -77,10 +79,21 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset) return IRQ_EINT8 + offset; } +static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { + .set_config = s3c_gpio_setcfg_s3c24xx_a, + .get_config = s3c_gpio_getcfg_s3c24xx_a, +}; + +struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { + .set_config = s3c_gpio_setcfg_s3c24xx, + .get_config = s3c_gpio_getcfg_s3c24xx, +}; + struct s3c_gpio_chip s3c24xx_gpios[] = { [0] = { .base = S3C2410_GPACON, .pm = __gpio_pm(&s3c_gpio_pm_1bit), + .config = &s3c24xx_gpiocfg_banka, .chip = { .base = S3C2410_GPA(0), .owner = THIS_MODULE, @@ -161,15 +174,58 @@ struct s3c_gpio_chip s3c24xx_gpios[] = { .ngpio = 11, }, }, + /* GPIOS for the S3C2443 and later devices. */ + { + .base = S3C2440_GPJCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPJ(0), + .owner = THIS_MODULE, + .label = "GPIOJ", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPKCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPK(0), + .owner = THIS_MODULE, + .label = "GPIOK", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPLCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPL(0), + .owner = THIS_MODULE, + .label = "GPIOL", + .ngpio = 15, + }, + }, { + .base = S3C2443_GPMCON, + .pm = __gpio_pm(&s3c_gpio_pm_2bit), + .chip = { + .base = S3C2410_GPM(0), + .owner = THIS_MODULE, + .label = "GPIOM", + .ngpio = 2, + }, + }, }; + static __init int s3c24xx_gpiolib_init(void) { struct s3c_gpio_chip *chip = s3c24xx_gpios; int gpn; - for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) + for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) { + if (!chip->config) + chip->config = &s3c24xx_gpiocfg_default; + s3c_gpiolib_add(chip); + } return 0; } diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 3620dd2..60627e6 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -43,6 +43,7 @@ #include <asm/mach/time.h> +#include <plat/gpio-cfg.h> #include <plat/pm.h> #define PFX "s3c24xx-pm: " @@ -90,22 +91,22 @@ static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) { unsigned long irqstate; unsigned long pinstate; - int irq = s3c2410_gpio_getirq(pin); + int irq = gpio_to_irq(pin); if (irqoffs < 4) irqstate = s3c_irqwake_intmask & (1L<<irqoffs); else irqstate = s3c_irqwake_eintmask & (1L<<irqoffs); - pinstate = s3c2410_gpio_getcfg(pin); + pinstate = s3c_gpio_getcfg(pin); if (!irqstate) { if (pinstate == S3C2410_GPIO_IRQ) - S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin); + S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin); } else { if (pinstate == S3C2410_GPIO_IRQ) { S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin); - s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); } } } diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c index 71a6acc..9e90a7c 100644 --- a/arch/arm/plat-s3c24xx/setup-i2c.c +++ b/arch/arm/plat-s3c24xx/setup-i2c.c @@ -15,12 +15,13 @@ struct platform_device; +#include <plat/gpio-cfg.h> #include <plat/iic.h> #include <mach/hardware.h> #include <mach/regs-gpio.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA); - s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL); + s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA); + s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL); } diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c index da7a617..9793544 100644 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -21,16 +21,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, int enable) { if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); - s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); - s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); + s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); + s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); + s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); s3c2410_gpio_pullup(S3C2410_GPE(11), 0); s3c2410_gpio_pullup(S3C2410_GPE(13), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPE(11), 1); - s3c2410_gpio_pullup(S3C2410_GPE(12), 1); - s3c2410_gpio_pullup(S3C2410_GPE(13), 1); + s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c index 89fcf53..db9e9e4 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c @@ -23,16 +23,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, printk(KERN_INFO "%s(%d)\n", __func__, enable); if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); - s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); - s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); + s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); + s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); + s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); s3c2410_gpio_pullup(S3C2410_GPD(10), 0); s3c2410_gpio_pullup(S3C2410_GPD(9), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPD(10), 1); - s3c2410_gpio_pullup(S3C2410_GPD(9), 1); - s3c2410_gpio_pullup(S3C2410_GPD(8), 1); + s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c index 86b9edc..8ea663a 100644 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -21,16 +21,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, int enable) { if (enable) { - s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); - s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); - s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); + s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); + s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); + s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); s3c2410_gpio_pullup(S3C2410_GPG(5), 0); s3c2410_gpio_pullup(S3C2410_GPG(6), 0); } else { - s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); - s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); - s3c2410_gpio_pullup(S3C2410_GPG(5), 1); - s3c2410_gpio_pullup(S3C2410_GPG(6), 1); - s3c2410_gpio_pullup(S3C2410_GPG(7), 1); + s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); + s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); + s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); } } diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index 44a84e8..a76eef5 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -1,7 +1,7 @@ /* linux/arch/arm/plat-s3c/gpio-config.c * * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics + * Copyright 2008-2010 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * @@ -33,14 +33,34 @@ int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) offset = pin - chip->chip.base; - local_irq_save(flags); + s3c_gpio_lock(chip, flags); ret = s3c_gpio_do_setcfg(chip, offset, config); - local_irq_restore(flags); + s3c_gpio_unlock(chip, flags); return ret; } EXPORT_SYMBOL(s3c_gpio_cfgpin); +unsigned s3c_gpio_getcfg(unsigned int pin) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + unsigned ret = 0; + int offset; + + if (chip) { + offset = pin - chip->chip.base; + + s3c_gpio_lock(chip, flags); + ret = s3c_gpio_do_getcfg(chip, offset); + s3c_gpio_unlock(chip, flags); + } + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_getcfg); + + int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) { struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); @@ -52,17 +72,17 @@ int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) offset = pin - chip->chip.base; - local_irq_save(flags); + s3c_gpio_lock(chip, flags); ret = s3c_gpio_do_setpull(chip, offset, pull); - local_irq_restore(flags); + s3c_gpio_unlock(chip, flags); return ret; } EXPORT_SYMBOL(s3c_gpio_setpull); #ifdef CONFIG_S3C_GPIO_CFG_S3C24XX -int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) +int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) { void __iomem *reg = chip->base; unsigned int shift = off; @@ -87,6 +107,19 @@ int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, return 0; } +unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off; + con &= 1; + con++; + + return S3C_GPIO_SFN(con); +} + int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg) { @@ -109,6 +142,19 @@ int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, return 0; } + +unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off * 2; + con &= 3; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} #endif #ifdef CONFIG_S3C_GPIO_CFG_S3C64XX @@ -134,6 +180,25 @@ int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, return 0; } + +unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + con = __raw_readl(reg); + con >>= shift; + con &= 0xf; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + #endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ #ifdef CONFIG_S3C_GPIO_PULL_UPDOWN @@ -164,3 +229,35 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, return (__force s3c_gpio_pull_t)pup; } #endif + +#ifdef CONFIG_S3C_GPIO_PULL_UP +int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup = __raw_readl(reg); + + if (pup == S3C_GPIO_PULL_UP) + pup &= ~(1 << off); + else if (pup == S3C_GPIO_PULL_NONE) + pup |= (1 << off); + else + return -EINVAL; + + __raw_writel(pup, reg); + return 0; +} + +s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup &= (1 << off); + return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP; +} +#endif /* CONFIG_S3C_GPIO_PULL_UP */ + diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c index 28d2ab8..b83a833 100644 --- a/arch/arm/plat-samsung/gpio.c +++ b/arch/arm/plat-samsung/gpio.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/gpio.h> +#include <linux/spinlock.h> #include <plat/gpio-core.h> @@ -52,14 +53,14 @@ static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset) unsigned long flags; unsigned long con; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); con = __raw_readl(base + 0x00); con &= ~(3 << (offset * 2)); __raw_writel(con, base + 0x00); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); return 0; } @@ -72,7 +73,7 @@ static int s3c_gpiolib_output(struct gpio_chip *chip, unsigned long dat; unsigned long con; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); dat = __raw_readl(base + 0x04); dat &= ~(1 << offset); @@ -87,7 +88,7 @@ static int s3c_gpiolib_output(struct gpio_chip *chip, __raw_writel(con, base + 0x00); __raw_writel(dat, base + 0x04); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); return 0; } @@ -99,7 +100,7 @@ static void s3c_gpiolib_set(struct gpio_chip *chip, unsigned long flags; unsigned long dat; - local_irq_save(flags); + s3c_gpio_lock(ourchip, flags); dat = __raw_readl(base + 0x04); dat &= ~(1 << offset); @@ -107,7 +108,7 @@ static void s3c_gpiolib_set(struct gpio_chip *chip, dat |= 1 << offset; __raw_writel(dat, base + 0x04); - local_irq_restore(flags); + s3c_gpio_unlock(ourchip, flags); } static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset) @@ -131,6 +132,8 @@ __init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) BUG_ON(!gc->label); BUG_ON(!gc->ngpio); + spin_lock_init(&chip->lock); + if (!gc->direction_input) gc->direction_input = s3c_gpiolib_input; if (!gc->direction_output) diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index dda19da..3e21c75 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -30,6 +30,12 @@ static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, return (chip->config->set_config)(chip, off, config); } +static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip, + unsigned int off) +{ + return (chip->config->get_config)(chip, off); +} + static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, unsigned int off, s3c_gpio_pull_t pull) { @@ -53,6 +59,18 @@ extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); /** + * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg + * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the + * S3C_GPIO_SPECIAL() macro. + */ +unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off); + +/** * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. @@ -65,6 +83,21 @@ extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable + * GPIO configuration value. + * + * @sa s3c_gpio_getcfg_s3c24xx + * @sa s3c_gpio_getcfg_s3c64xx_4bit + */ +extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off); + /** * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. * @chip: The gpio chip that is being configured. @@ -85,6 +118,20 @@ extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, unsigned int off, unsigned int cfg); +/** + * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration + * register setting into a value the software can use, such as could be passed + * to s3c_gpio_setcfg_s3c64xx_4bit(). + * + * @sa s3c_gpio_getcfg_s3c24xx + */ +extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off); + /* Pull-{up,down} resistor controls. * * S3C2410,S3C2440,S3C24A0 = Pull-UP, @@ -146,6 +193,17 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, unsigned int off); /** + * s3c_gpio_getpull_1up() - Get configuration for choice of up or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-up resistor for the + * given GPIO in the same case as s3c_gpio_setpull_1up. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off); + +/** * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 29cd6a8..8d01e85 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -77,6 +77,17 @@ struct s3c_gpio_cfg { */ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); +/** + * s3c_gpio_getcfg - Read the current function for a GPIO pin + * @pin: The pin to read the configuration value for. + * + * Read the configuration state of the given @pin, returning a value that + * could be passed back to s3c_gpio_cfgpin(). + * + * @sa s3c_gpio_cfgpin + */ +extern unsigned s3c_gpio_getcfg(unsigned int pin); + /* Define values for the pull-{up,down} available for each gpio pin. * * These values control the state of the weak pull-{up,down} resistors diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 49ff406..f3a68d1 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -44,16 +44,26 @@ struct s3c_gpio_cfg; * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. * @config: special function and pull-resistor control information. + * @lock: Lock for exclusive access to this gpio bank. * @pm_save: Save information for suspend/resume support. * * This wrapper provides the necessary information for the Samsung * specific gpios being registered with gpiolib. + * + * The lock protects each gpio bank from multiple access of the shared + * configuration registers, or from reading of data whilst another thread + * is writing to the register set. + * + * Each chip has its own lock to avoid any contention between different + * CPU cores trying to get one lock for different GPIO banks, where each + * bank of GPIO has its own register space and configuration registers. */ struct s3c_gpio_chip { struct gpio_chip chip; struct s3c_gpio_cfg *config; struct s3c_gpio_pm *pm; void __iomem *base; + spinlock_t lock; #ifdef CONFIG_PM u32 pm_save[4]; #endif @@ -108,6 +118,9 @@ extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); +/* exported for core SoC support to change */ +extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default; + #ifdef CONFIG_S3C_GPIO_TRACK extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; @@ -135,3 +148,7 @@ extern struct s3c_gpio_pm s3c_gpio_pm_4bit; #define __gpio_pm(x) NULL #endif /* CONFIG_PM */ + +/* locking wrappers to deal with multiple access to the same gpio bank */ +#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl) +#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl) diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index 69a4c7f..d50ab9d 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -329,7 +329,7 @@ void s3c_pm_save_gpios(void) struct s3c_gpio_chip *ourchip; unsigned int gpio_nr; - for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { ourchip = s3c_gpiolib_getchip(gpio_nr); if (!ourchip) continue; @@ -367,7 +367,7 @@ void s3c_pm_restore_gpios(void) struct s3c_gpio_chip *ourchip; unsigned int gpio_nr; - for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) { + for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { ourchip = s3c_gpiolib_getchip(gpio_nr); if (!ourchip) continue; |