aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/PCI
diff options
context:
space:
mode:
authorRandy Dunlap <randy.dunlap@oracle.com>2008-03-10 17:16:32 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2008-04-20 21:46:51 -0700
commit4b5ff469234b8ab5cd05f4a201cbb229896729d0 (patch)
treedc44c4e82be76ffc00cb981eb4606276fffa7e1e /Documentation/PCI
parent3925e6fc1f774048404fdd910b0345b06c699eb4 (diff)
downloadkernel_goldelico_gta04-4b5ff469234b8ab5cd05f4a201cbb229896729d0.zip
kernel_goldelico_gta04-4b5ff469234b8ab5cd05f4a201cbb229896729d0.tar.gz
kernel_goldelico_gta04-4b5ff469234b8ab5cd05f4a201cbb229896729d0.tar.bz2
PCI: doc/pci: create Documentation/PCI/ and move files into it
Create Documentation/PCI/ and move PCI-related files to it. Fix a few instances of trailing whitespace. Update references to the new file locations. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'Documentation/PCI')
-rw-r--r--Documentation/PCI/00-INDEX12
-rw-r--r--Documentation/PCI/PCIEBUS-HOWTO.txt217
-rw-r--r--Documentation/PCI/pci-error-recovery.txt396
-rw-r--r--Documentation/PCI/pci.txt646
-rw-r--r--Documentation/PCI/pcieaer-howto.txt253
5 files changed, 1524 insertions, 0 deletions
diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX
new file mode 100644
index 0000000..49f4394
--- /dev/null
+++ b/Documentation/PCI/00-INDEX
@@ -0,0 +1,12 @@
+00-INDEX
+ - this file
+PCI-DMA-mapping.txt
+ - info for PCI drivers using DMA portably across all platforms
+PCIEBUS-HOWTO.txt
+ - a guide describing the PCI Express Port Bus driver
+pci-error-recovery.txt
+ - info on PCI error recovery
+pci.txt
+ - info on the PCI subsystem for device driver authors
+pcieaer-howto.txt
+ - the PCI Express Advanced Error Reporting Driver Guide HOWTO
diff --git a/Documentation/PCI/PCIEBUS-HOWTO.txt b/Documentation/PCI/PCIEBUS-HOWTO.txt
new file mode 100644
index 0000000..9a07e38
--- /dev/null
+++ b/Documentation/PCI/PCIEBUS-HOWTO.txt
@@ -0,0 +1,217 @@
+ The PCI Express Port Bus Driver Guide HOWTO
+ Tom L Nguyen tom.l.nguyen@intel.com
+ 11/03/2004
+
+1. About this guide
+
+This guide describes the basics of the PCI Express Port Bus driver
+and provides information on how to enable the service drivers to
+register/unregister with the PCI Express Port Bus Driver.
+
+2. Copyright 2004 Intel Corporation
+
+3. What is the PCI Express Port Bus Driver
+
+A PCI Express Port is a logical PCI-PCI Bridge structure. There
+are two types of PCI Express Port: the Root Port and the Switch
+Port. The Root Port originates a PCI Express link from a PCI Express
+Root Complex and the Switch Port connects PCI Express links to
+internal logical PCI buses. The Switch Port, which has its secondary
+bus representing the switch's internal routing logic, is called the
+switch's Upstream Port. The switch's Downstream Port is bridging from
+switch's internal routing bus to a bus representing the downstream
+PCI Express link from the PCI Express Switch.
+
+A PCI Express Port can provide up to four distinct functions,
+referred to in this document as services, depending on its port type.
+PCI Express Port's services include native hotplug support (HP),
+power management event support (PME), advanced error reporting
+support (AER), and virtual channel support (VC). These services may
+be handled by a single complex driver or be individually distributed
+and handled by corresponding service drivers.
+
+4. Why use the PCI Express Port Bus Driver?
+
+In existing Linux kernels, the Linux Device Driver Model allows a
+physical device to be handled by only a single driver. The PCI
+Express Port is a PCI-PCI Bridge device with multiple distinct
+services. To maintain a clean and simple solution each service
+may have its own software service driver. In this case several
+service drivers will compete for a single PCI-PCI Bridge device.
+For example, if the PCI Express Root Port native hotplug service
+driver is loaded first, it claims a PCI-PCI Bridge Root Port. The
+kernel therefore does not load other service drivers for that Root
+Port. In other words, it is impossible to have multiple service
+drivers load and run on a PCI-PCI Bridge device simultaneously
+using the current driver model.
+
+To enable multiple service drivers running simultaneously requires
+having a PCI Express Port Bus driver, which manages all populated
+PCI Express Ports and distributes all provided service requests
+to the corresponding service drivers as required. Some key
+advantages of using the PCI Express Port Bus driver are listed below:
+
+ - Allow multiple service drivers to run simultaneously on
+ a PCI-PCI Bridge Port device.
+
+ - Allow service drivers implemented in an independent
+ staged approach.
+
+ - Allow one service driver to run on multiple PCI-PCI Bridge
+ Port devices.
+
+ - Manage and distribute resources of a PCI-PCI Bridge Port
+ device to requested service drivers.
+
+5. Configuring the PCI Express Port Bus Driver vs. Service Drivers
+
+5.1 Including the PCI Express Port Bus Driver Support into the Kernel
+
+Including the PCI Express Port Bus driver depends on whether the PCI
+Express support is included in the kernel config. The kernel will
+automatically include the PCI Express Port Bus driver as a kernel
+driver when the PCI Express support is enabled in the kernel.
+
+5.2 Enabling Service Driver Support
+
+PCI device drivers are implemented based on Linux Device Driver Model.
+All service drivers are PCI device drivers. As discussed above, it is
+impossible to load any service driver once the kernel has loaded the
+PCI Express Port Bus Driver. To meet the PCI Express Port Bus Driver
+Model requires some minimal changes on existing service drivers that
+imposes no impact on the functionality of existing service drivers.
+
+A service driver is required to use the two APIs shown below to
+register its service with the PCI Express Port Bus driver (see
+section 5.2.1 & 5.2.2). It is important that a service driver
+initializes the pcie_port_service_driver data structure, included in
+header file /include/linux/pcieport_if.h, before calling these APIs.
+Failure to do so will result an identity mismatch, which prevents
+the PCI Express Port Bus driver from loading a service driver.
+
+5.2.1 pcie_port_service_register
+
+int pcie_port_service_register(struct pcie_port_service_driver *new)
+
+This API replaces the Linux Driver Model's pci_module_init API. A
+service driver should always calls pcie_port_service_register at
+module init. Note that after service driver being loaded, calls
+such as pci_enable_device(dev) and pci_set_master(dev) are no longer
+necessary since these calls are executed by the PCI Port Bus driver.
+
+5.2.2 pcie_port_service_unregister
+
+void pcie_port_service_unregister(struct pcie_port_service_driver *new)
+
+pcie_port_service_unregister replaces the Linux Driver Model's
+pci_unregister_driver. It's always called by service driver when a
+module exits.
+
+5.2.3 Sample Code
+
+Below is sample service driver code to initialize the port service
+driver data structure.
+
+static struct pcie_port_service_id service_id[] = { {
+ .vendor = PCI_ANY_ID,
+ .device = PCI_ANY_ID,
+ .port_type = PCIE_RC_PORT,
+ .service_type = PCIE_PORT_SERVICE_AER,
+ }, { /* end: all zeroes */ }
+};
+
+static struct pcie_port_service_driver root_aerdrv = {
+ .name = (char *)device_name,
+ .id_table = &service_id[0],
+
+ .probe = aerdrv_load,
+ .remove = aerdrv_unload,
+
+ .suspend = aerdrv_suspend,
+ .resume = aerdrv_resume,
+};
+
+Below is a sample code for registering/unregistering a service
+driver.
+
+static int __init aerdrv_service_init(void)
+{
+ int retval = 0;
+
+ retval = pcie_port_service_register(&root_aerdrv);
+ if (!retval) {
+ /*
+ * FIX ME
+ */
+ }
+ return retval;
+}
+
+static void __exit aerdrv_service_exit(void)
+{
+ pcie_port_service_unregister(&root_aerdrv);
+}
+
+module_init(aerdrv_service_init);
+module_exit(aerdrv_service_exit);
+
+6. Possible Resource Conflicts
+
+Since all service drivers of a PCI-PCI Bridge Port device are
+allowed to run simultaneously, below lists a few of possible resource
+conflicts with proposed solutions.
+
+6.1 MSI Vector Resource
+
+The MSI capability structure enables a device software driver to call
+pci_enable_msi to request MSI based interrupts. Once MSI interrupts
+are enabled on a device, it stays in this mode until a device driver
+calls pci_disable_msi to disable MSI interrupts and revert back to
+INTx emulation mode. Since service drivers of the same PCI-PCI Bridge
+port share the same physical device, if an individual service driver
+calls pci_enable_msi/pci_disable_msi it may result unpredictable
+behavior. For example, two service drivers run simultaneously on the
+same physical Root Port. Both service drivers call pci_enable_msi to
+request MSI based interrupts. A service driver may not know whether
+any other service drivers have run on this Root Port. If either one
+of them calls pci_disable_msi, it puts the other service driver
+in a wrong interrupt mode.
+
+To avoid this situation all service drivers are not permitted to
+switch interrupt mode on its device. The PCI Express Port Bus driver
+is responsible for determining the interrupt mode and this should be
+transparent to service drivers. Service drivers need to know only
+the vector IRQ assigned to the field irq of struct pcie_device, which
+is passed in when the PCI Express Port Bus driver probes each service
+driver. Service drivers should use (struct pcie_device*)dev->irq to
+call request_irq/free_irq. In addition, the interrupt mode is stored
+in the field interrupt_mode of struct pcie_device.
+
+6.2 MSI-X Vector Resources
+
+Similar to the MSI a device driver for an MSI-X capable device can
+call pci_enable_msix to request MSI-X interrupts. All service drivers
+are not permitted to switch interrupt mode on its device. The PCI
+Express Port Bus driver is responsible for determining the interrupt
+mode and this should be transparent to service drivers. Any attempt
+by service driver to call pci_enable_msix/pci_disable_msix may
+result unpredictable behavior. Service drivers should use
+(struct pcie_device*)dev->irq and call request_irq/free_irq.
+
+6.3 PCI Memory/IO Mapped Regions
+
+Service drivers for PCI Express Power Management (PME), Advanced
+Error Reporting (AER), Hot-Plug (HP) and Virtual Channel (VC) access
+PCI configuration space on the PCI Express port. In all cases the
+registers accessed are independent of each other. This patch assumes
+that all service drivers will be well behaved and not overwrite
+other service driver's configuration settings.
+
+6.4 PCI Config Registers
+
+Each service driver runs its PCI config operations on its own
+capability structure except the PCI Express capability structure, in
+which Root Control register and Device Control register are shared
+between PME and AER. This patch assumes that all service drivers
+will be well behaved and not overwrite other service driver's
+configuration settings.
diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt
new file mode 100644
index 0000000..6650af4
--- /dev/null
+++ b/Documentation/PCI/pci-error-recovery.txt
@@ -0,0 +1,396 @@
+
+ PCI Error Recovery
+ ------------------
+ February 2, 2006
+
+ Current document maintainer:
+ Linas Vepstas <linas@austin.ibm.com>
+
+
+Many PCI bus controllers are able to detect a variety of hardware
+PCI errors on the bus, such as parity errors on the data and address
+busses, as well as SERR and PERR errors. Some of the more advanced
+chipsets are able to deal with these errors; these include PCI-E chipsets,
+and the PCI-host bridges found on IBM Power4 and Power5-based pSeries
+boxes. A typical action taken is to disconnect the affected device,
+halting all I/O to it. The goal of a disconnection is to avoid system
+corruption; for example, to halt system memory corruption due to DMA's
+to "wild" addresses. Typically, a reconnection mechanism is also
+offered, so that the affected PCI device(s) are reset and put back
+into working condition. The reset phase requires coordination
+between the affected device drivers and the PCI controller chip.
+This document describes a generic API for notifying device drivers
+of a bus disconnection, and then performing error recovery.
+This API is currently implemented in the 2.6.16 and later kernels.
+
+Reporting and recovery is performed in several steps. First, when
+a PCI hardware error has resulted in a bus disconnect, that event
+is reported as soon as possible to all affected device drivers,
+including multiple instances of a device driver on multi-function
+cards. This allows device drivers to avoid deadlocking in spinloops,
+waiting for some i/o-space register to change, when it never will.
+It also gives the drivers a chance to defer incoming I/O as
+needed.
+
+Next, recovery is performed in several stages. Most of the complexity
+is forced by the need to handle multi-function devices, that is,
+devices that have multiple device drivers associated with them.
+In the first stage, each driver is allowed to indicate what type
+of reset it desires, the choices being a simple re-enabling of I/O
+or requesting a hard reset (a full electrical #RST of the PCI card).
+If any driver requests a full reset, that is what will be done.
+
+After a full reset and/or a re-enabling of I/O, all drivers are
+again notified, so that they may then perform any device setup/config
+that may be required. After these have all completed, a final
+"resume normal operations" event is sent out.
+
+The biggest reason for choosing a kernel-based implementation rather
+than a user-space implementation was the need to deal with bus
+disconnects of PCI devices attached to storage media, and, in particular,
+disconnects from devices holding the root file system. If the root
+file system is disconnected, a user-space mechanism would have to go
+through a large number of contortions to complete recovery. Almost all
+of the current Linux file systems are not tolerant of disconnection
+from/reconnection to their underlying block device. By contrast,
+bus errors are easy to manage in the device driver. Indeed, most
+device drivers already handle very similar recovery procedures;
+for example, the SCSI-generic layer already provides significant
+mechanisms for dealing with SCSI bus errors and SCSI bus resets.
+
+
+Detailed Design
+---------------
+Design and implementation details below, based on a chain of
+public email discussions with Ben Herrenschmidt, circa 5 April 2005.
+
+The error recovery API support is exposed to the driver in the form of
+a structure of function pointers pointed to by a new field in struct
+pci_driver. A driver that fails to provide the structure is "non-aware",
+and the actual recovery steps taken are platform dependent. The
+arch/powerpc implementation will simulate a PCI hotplug remove/add.
+
+This structure has the form:
+struct pci_error_handlers
+{
+ int (*error_detected)(struct pci_dev *dev, enum pci_channel_state);
+ int (*mmio_enabled)(struct pci_dev *dev);
+ int (*link_reset)(struct pci_dev *dev);
+ int (*slot_reset)(struct pci_dev *dev);
+ void (*resume)(struct pci_dev *dev);
+};
+
+The possible channel states are:
+enum pci_channel_state {
+ pci_channel_io_normal, /* I/O channel is in normal state */
+ pci_channel_io_frozen, /* I/O to channel is blocked */
+ pci_channel_io_perm_failure, /* PCI card is dead */
+};
+
+Possible return values are:
+enum pci_ers_result {
+ PCI_ERS_RESULT_NONE, /* no result/none/not supported in device driver */
+ PCI_ERS_RESULT_CAN_RECOVER, /* Device driver can recover without slot reset */
+ PCI_ERS_RESULT_NEED_RESET, /* Device driver wants slot to be reset. */
+ PCI_ERS_RESULT_DISCONNECT, /* Device has completely failed, is unrecoverable */
+ PCI_ERS_RESULT_RECOVERED, /* Device driver is fully recovered and operational */
+};
+
+A driver does not have to implement all of these callbacks; however,
+if it implements any, it must implement error_detected(). If a callback
+is not implemented, the corresponding feature is considered unsupported.
+For example, if mmio_enabled() and resume() aren't there, then it
+is assumed that the driver is not doing any direct recovery and requires
+a reset. If link_reset() is not implemented, the card is assumed as
+not care about link resets. Typically a driver will want to know about
+a slot_reset().
+
+The actual steps taken by a platform to recover from a PCI error
+event will be platform-dependent, but will follow the general
+sequence described below.
+
+STEP 0: Error Event
+-------------------
+PCI bus error is detect by the PCI hardware. On powerpc, the slot
+is isolated, in that all I/O is blocked: all reads return 0xffffffff,
+all writes are ignored.
+
+
+STEP 1: Notification
+--------------------
+Platform calls the error_detected() callback on every instance of
+every driver affected by the error.
+
+At this point, the device might not be accessible anymore, depending on
+the platform (the slot will be isolated on powerpc). The driver may
+already have "noticed" the error because of a failing I/O, but this
+is the proper "synchronization point", that is, it gives the driver
+a chance to cleanup, waiting for pending stuff (timers, whatever, etc...)
+to complete; it can take semaphores, schedule, etc... everything but
+touch the device. Within this function and after it returns, the driver
+shouldn't do any new IOs. Called in task context. This is sort of a
+"quiesce" point. See note about interrupts at the end of this doc.
+
+All drivers participating in this system must implement this call.
+The driver must return one of the following result codes:
+ - PCI_ERS_RESULT_CAN_RECOVER:
+ Driver returns this if it thinks it might be able to recover
+ the HW by just banging IOs or if it wants to be given
+ a chance to extract some diagnostic information (see
+ mmio_enable, below).
+ - PCI_ERS_RESULT_NEED_RESET:
+ Driver returns this if it can't recover without a hard
+ slot reset.
+ - PCI_ERS_RESULT_DISCONNECT:
+ Driver returns this if it doesn't want to recover at all.
+
+The next step taken will depend on the result codes returned by the
+drivers.
+
+If all drivers on the segment/slot return PCI_ERS_RESULT_CAN_RECOVER,
+then the platform should re-enable IOs on the slot (or do nothing in
+particular, if the platform doesn't isolate slots), and recovery
+proceeds to STEP 2 (MMIO Enable).
+
+If any driver requested a slot reset (by returning PCI_ERS_RESULT_NEED_RESET),
+then recovery proceeds to STEP 4 (Slot Reset).
+
+If the platform is unable to recover the slot, the next step
+is STEP 6 (Permanent Failure).
+
+>>> The current powerpc implementation assumes that a device driver will
+>>> *not* schedule or semaphore in this routine; the current powerpc
+>>> implementation uses one kernel thread to notify all devices;
+>>> thus, if one device sleeps/schedules, all devices are affected.
+>>> Doing better requires complex multi-threaded logic in the error
+>>> recovery implementation (e.g. waiting for all notification threads
+>>> to "join" before proceeding with recovery.) This seems excessively
+>>> complex and not worth implementing.
+
+>>> The current powerpc implementation doesn't much care if the device
+>>> attempts I/O at this point, or not. I/O's will fail, returning
+>>> a value of 0xff on read, and writes will be dropped. If the device
+>>> driver attempts more than 10K I/O's to a frozen adapter, it will
+>>> assume that the device driver has gone into an infinite loop, and
+>>> it will panic the kernel. There doesn't seem to be any other
+>>> way of stopping a device driver that insists on spinning on I/O.
+
+STEP 2: MMIO Enabled
+-------------------
+The platform re-enables MMIO to the device (but typically not the
+DMA), and then calls the mmio_enabled() callback on all affected
+device drivers.
+
+This is the "early recovery" call. IOs are allowed again, but DMA is
+not (hrm... to be discussed, I prefer not), with some restrictions. This
+is NOT a callback for the driver to start operations again, only to
+peek/poke at the device, extract diagnostic information, if any, and
+eventually do things like trigger a device local reset or some such,
+but not restart operations. This is callback is made if all drivers on
+a segment agree that they can try to recover and if no automatic link reset
+was performed by the HW. If the platform can't just re-enable IOs without
+a slot reset or a link reset, it wont call this callback, and instead
+will have gone directly to STEP 3 (Link Reset) or STEP 4 (Slot Reset)
+
+>>> The following is proposed; no platform implements this yet:
+>>> Proposal: All I/O's should be done _synchronously_ from within
+>>> this callback, errors triggered by them will be returned via
+>>> the normal pci_check_whatever() API, no new error_detected()
+>>> callback will be issued due to an error happening here. However,
+>>> such an error might cause IOs to be re-blocked for the whole
+>>> segment, and thus invalidate the recovery that other devices
+>>> on the same segment might have done, forcing the whole segment
+>>> into one of the next states, that is, link reset or slot reset.
+
+The driver should return one of the following result codes:
+ - PCI_ERS_RESULT_RECOVERED
+ Driver returns this if it thinks the device is fully
+ functional and thinks it is ready to start
+ normal driver operations again. There is no
+ guarantee that the driver will actually be
+ allowed to proceed, as another driver on the
+ same segment might have failed and thus triggered a
+ slot reset on platforms that support it.
+
+ - PCI_ERS_RESULT_NEED_RESET
+ Driver returns this if it thinks the device is not
+ recoverable in it's current state and it needs a slot
+ reset to proceed.
+
+ - PCI_ERS_RESULT_DISCONNECT
+ Same as above. Total failure, no recovery even after
+ reset driver dead. (To be defined more precisely)
+
+The next step taken depends on the results returned by the drivers.
+If all drivers returned PCI_ERS_RESULT_RECOVERED, then the platform
+proceeds to either STEP3 (Link Reset) or to STEP 5 (Resume Operations).
+
+If any driver returned PCI_ERS_RESULT_NEED_RESET, then the platform
+proceeds to STEP 4 (Slot Reset)
+
+>>> The current powerpc implementation does not implement this callback.
+
+
+STEP 3: Link Reset
+------------------
+The platform resets the link, and then calls the link_reset() callback
+on all affected device drivers. This is a PCI-Express specific state
+and is done whenever a non-fatal error has been detected that can be
+"solved" by resetting the link. This call informs the driver of the
+reset and the driver should check to see if the device appears to be
+in working condition.
+
+The driver is not supposed to restart normal driver I/O operations
+at this point. It should limit itself to "probing" the device to
+check it's recoverability status. If all is right, then the platform
+will call resume() once all drivers have ack'd link_reset().
+
+ Result codes:
+ (identical to STEP 3 (MMIO Enabled)
+
+The platform then proceeds to either STEP 4 (Slot Reset) or STEP 5
+(Resume Operations).
+
+>>> The current powerpc implementation does not implement this callback.
+
+
+STEP 4: Slot Reset
+------------------
+The platform performs a soft or hard reset of the device, and then
+calls the slot_reset() callback.
+
+A soft reset consists of asserting the adapter #RST line and then
+restoring the PCI BAR's and PCI configuration header to a state
+that is equivalent to what it would be after a fresh system
+power-on followed by power-on BIOS/system firmware initialization.
+If the platform supports PCI hotplug, then the reset might be
+performed by toggling the slot electrical power off/on.
+
+It is important for the platform to restore the PCI config space
+to the "fresh poweron" state, rather than the "last state". After
+a slot reset, the device driver will almost always use its standard
+device initialization routines, and an unusual config space setup
+may result in hung devices, kernel panics, or silent data corruption.
+
+This call gives drivers the chance to re-initialize the hardware
+(re-download firmware, etc.). At this point, the driver may assume
+that he card is in a fresh state and is fully functional. In
+particular, interrupt generation should work normally.
+
+Drivers should not yet restart normal I/O processing operations
+at this point. If all device drivers report success on this
+callback, the platform will call resume() to complete the sequence,
+and let the driver restart normal I/O processing.
+
+A driver can still return a critical failure for this function if
+it can't get the device operational after reset. If the platform
+previously tried a soft reset, it might now try a hard reset (power
+cycle) and then call slot_reset() again. It the device still can't
+be recovered, there is nothing more that can be done; the platform
+will typically report a "permanent failure" in such a case. The
+device will be considered "dead" in this case.
+
+Drivers for multi-function cards will need to coordinate among
+themselves as to which driver instance will perform any "one-shot"
+or global device initialization. For example, the Symbios sym53cxx2
+driver performs device init only from PCI function 0:
+
++ if (PCI_FUNC(pdev->devfn) == 0)
++ sym_reset_scsi_bus(np, 0);
+
+ Result codes:
+ - PCI_ERS_RESULT_DISCONNECT
+ Same as above.
+
+Platform proceeds either to STEP 5 (Resume Operations) or STEP 6 (Permanent
+Failure).
+
+>>> The current powerpc implementation does not currently try a
+>>> power-cycle reset if the driver returned PCI_ERS_RESULT_DISCONNECT.
+>>> However, it probably should.
+
+
+STEP 5: Resume Operations
+-------------------------
+The platform will call the resume() callback on all affected device
+drivers if all drivers on the segment have returned
+PCI_ERS_RESULT_RECOVERED from one of the 3 previous callbacks.
+The goal of this callback is to tell the driver to restart activity,
+that everything is back and running. This callback does not return
+a result code.
+
+At this point, if a new error happens, the platform will restart
+a new error recovery sequence.
+
+STEP 6: Permanent Failure
+-------------------------
+A "permanent failure" has occurred, and the platform cannot recover
+the device. The platform will call error_detected() with a
+pci_channel_state value of pci_channel_io_perm_failure.
+
+The device driver should, at this point, assume the worst. It should
+cancel all pending I/O, refuse all new I/O, returning -EIO to
+higher layers. The device driver should then clean up all of its
+memory and remove itself from kernel operations, much as it would
+during system shutdown.
+
+The platform will typically notify the system operator of the
+permanent failure in some way. If the device is hotplug-capable,
+the operator will probably want to remove and replace the device.
+Note, however, not all failures are truly "permanent". Some are
+caused by over-heating, some by a poorly seated card. Many
+PCI error events are caused by software bugs, e.g. DMA's to
+wild addresses or bogus split transactions due to programming
+errors. See the discussion in powerpc/eeh-pci-error-recovery.txt
+for additional detail on real-life experience of the causes of
+software errors.
+
+
+Conclusion; General Remarks
+---------------------------
+The way those callbacks are called is platform policy. A platform with
+no slot reset capability may want to just "ignore" drivers that can't
+recover (disconnect them) and try to let other cards on the same segment
+recover. Keep in mind that in most real life cases, though, there will
+be only one driver per segment.
+
+Now, a note about interrupts. If you get an interrupt and your
+device is dead or has been isolated, there is a problem :)
+The current policy is to turn this into a platform policy.
+That is, the recovery API only requires that:
+
+ - There is no guarantee that interrupt delivery can proceed from any
+device on the segment starting from the error detection and until the
+resume callback is sent, at which point interrupts are expected to be
+fully operational.
+
+ - There is no guarantee that interrupt delivery is stopped, that is,
+a driver that gets an interrupt after detecting an error, or that detects
+an error within the interrupt handler such that it prevents proper
+ack'ing of the interrupt (and thus removal of the source) should just
+return IRQ_NOTHANDLED. It's up to the platform to deal with that
+condition, typically by masking the IRQ source during the duration of
+the error handling. It is expected that the platform "knows" which
+interrupts are routed to error-management capable slots and can deal
+with temporarily disabling that IRQ number during error processing (this
+isn't terribly complex). That means some IRQ latency for other devices
+sharing the interrupt, but there is simply no other way. High end
+platforms aren't supposed to share interrupts between many devices
+anyway :)
+
+>>> Implementation details for the powerpc platform are discussed in
+>>> the file Documentation/powerpc/eeh-pci-error-recovery.txt
+
+>>> As of this writing, there are six device drivers with patches
+>>> implementing error recovery. Not all of these patches are in
+>>> mainline yet. These may be used as "examples":
+>>>
+>>> drivers/scsi/ipr.c
+>>> drivers/scsi/sym53cxx_2
+>>> drivers/next/e100.c
+>>> drivers/net/e1000
+>>> drivers/net/ixgb
+>>> drivers/net/s2io.c
+
+The End
+-------
diff --git a/Documentation/PCI/pci.txt b/Documentation/PCI/pci.txt
new file mode 100644
index 0000000..8d4dc62
--- /dev/null
+++ b/Documentation/PCI/pci.txt
@@ -0,0 +1,646 @@
+
+ How To Write Linux PCI Drivers
+
+ by Martin Mares <mj@ucw.cz> on 07-Feb-2000
+ updated by Grant Grundler <grundler@parisc-linux.org> on 23-Dec-2006
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The world of PCI is vast and full of (mostly unpleasant) surprises.
+Since each CPU architecture implements different chip-sets and PCI devices
+have different requirements (erm, "features"), the result is the PCI support
+in the Linux kernel is not as trivial as one would wish. This short paper
+tries to introduce all potential driver authors to Linux APIs for
+PCI device drivers.
+
+A more complete resource is the third edition of "Linux Device Drivers"
+by Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman.
+LDD3 is available for free (under Creative Commons License) from:
+
+ http://lwn.net/Kernel/LDD3/
+
+However, keep in mind that all documents are subject to "bit rot".
+Refer to the source code if things are not working as described here.
+
+Please send questions/comments/patches about Linux PCI API to the
+"Linux PCI" <linux-pci@atrey.karlin.mff.cuni.cz> mailing list.
+
+
+
+0. Structure of PCI drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+PCI drivers "discover" PCI devices in a system via pci_register_driver().
+Actually, it's the other way around. When the PCI generic code discovers
+a new device, the driver with a matching "description" will be notified.
+Details on this below.
+
+pci_register_driver() leaves most of the probing for devices to
+the PCI layer and supports online insertion/removal of devices [thus
+supporting hot-pluggable PCI, CardBus, and Express-Card in a single driver].
+pci_register_driver() call requires passing in a table of function
+pointers and thus dictates the high level structure of a driver.
+
+Once the driver knows about a PCI device and takes ownership, the
+driver generally needs to perform the following initialization:
+
+ Enable the device
+ Request MMIO/IOP resources
+ Set the DMA mask size (for both coherent and streaming DMA)
+ Allocate and initialize shared control data (pci_allocate_coherent())
+ Access device configuration space (if needed)
+ Register IRQ handler (request_irq())
+ Initialize non-PCI (i.e. LAN/SCSI/etc parts of the chip)
+ Enable DMA/processing engines
+
+When done using the device, and perhaps the module needs to be unloaded,
+the driver needs to take the follow steps:
+ Disable the device from generating IRQs
+ Release the IRQ (free_irq())
+ Stop all DMA activity
+ Release DMA buffers (both streaming and coherent)
+ Unregister from other subsystems (e.g. scsi or netdev)
+ Release MMIO/IOP resources
+ Disable the device
+
+Most of these topics are covered in the following sections.
+For the rest look at LDD3 or <linux/pci.h> .
+
+If the PCI subsystem is not configured (CONFIG_PCI is not set), most of
+the PCI functions described below are defined as inline functions either
+completely empty or just returning an appropriate error codes to avoid
+lots of ifdefs in the drivers.
+
+
+
+1. pci_register_driver() call
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+PCI device drivers call pci_register_driver() during their
+initialization with a pointer to a structure describing the driver
+(struct pci_driver):
+
+ field name Description
+ ---------- ------------------------------------------------------
+ id_table Pointer to table of device ID's the driver is
+ interested in. Most drivers should export this
+ table using MODULE_DEVICE_TABLE(pci,...).
+
+ probe This probing function gets called (during execution
+ of pci_register_driver() for already existing
+ devices or later if a new device gets inserted) for
+ all PCI devices which match the ID table and are not
+ "owned" by the other drivers yet. This function gets
+ passed a "struct pci_dev *" for each device whose
+ entry in the ID table matches the device. The probe
+ function returns zero when the driver chooses to
+ take "ownership" of the device or an error code
+ (negative number) otherwise.
+ The probe function always gets called from process
+ context, so it can sleep.
+
+ remove The remove() function gets called whenever a device
+ being handled by this driver is removed (either during
+ deregistration of the driver or when it's manually
+ pulled out of a hot-pluggable slot).
+ The remove function always gets called from process
+ context, so it can sleep.
+
+ suspend Put device into low power state.
+ suspend_late Put device into low power state.
+
+ resume_early Wake device from low power state.
+ resume Wake device from low power state.
+
+ (Please see Documentation/power/pci.txt for descriptions
+ of PCI Power Management and the related functions.)
+
+ shutdown Hook into reboot_notifier_list (kernel/sys.c).
+ Intended to stop any idling DMA operations.
+ Useful for enabling wake-on-lan (NIC) or changing
+ the power state of a device before reboot.
+ e.g. drivers/net/e100.c.
+
+ err_handler See Documentation/PCI/pci-error-recovery.txt
+
+
+The ID table is an array of struct pci_device_id entries ending with an
+all-zero entry; use of the macro DEFINE_PCI_DEVICE_TABLE is the preferred
+method of declaring the table. Each entry consists of:
+
+ vendor,device Vendor and device ID to match (or PCI_ANY_ID)
+
+ subvendor, Subsystem vendor and device ID to match (or PCI_ANY_ID)
+ subdevice,
+
+ class Device class, subclass, and "interface" to match.
+ See Appendix D of the PCI Local Bus Spec or
+ include/linux/pci_ids.h for a full list of classes.
+ Most drivers do not need to specify class/class_mask
+ as vendor/device is normally sufficient.
+
+ class_mask limit which sub-fields of the class field are compared.
+ See drivers/scsi/sym53c8xx_2/ for example of usage.
+
+ driver_data Data private to the driver.
+ Most drivers don't need to use driver_data field.
+ Best practice is to use driver_data as an index
+ into a static list of equivalent device types,
+ instead of using it as a pointer.
+
+
+Most drivers only need PCI_DEVICE() or PCI_DEVICE_CLASS() to set up
+a pci_device_id table.
+
+New PCI IDs may be added to a device driver pci_ids table at runtime
+as shown below:
+
+echo "vendor device subvendor subdevice class class_mask driver_data" > \
+/sys/bus/pci/drivers/{driver}/new_id
+
+All fields are passed in as hexadecimal values (no leading 0x).
+The vendor and device fields are mandatory, the others are optional. Users
+need pass only as many optional fields as necessary:
+ o subvendor and subdevice fields default to PCI_ANY_ID (FFFFFFFF)
+ o class and classmask fields default to 0
+ o driver_data defaults to 0UL.
+
+Once added, the driver probe routine will be invoked for any unclaimed
+PCI devices listed in its (newly updated) pci_ids list.
+
+When the driver exits, it just calls pci_unregister_driver() and the PCI layer
+automatically calls the remove hook for all devices handled by the driver.
+
+
+1.1 "Attributes" for driver functions/data
+
+Please mark the initialization and cleanup functions where appropriate
+(the corresponding macros are defined in <linux/init.h>):
+
+ __init Initialization code. Thrown away after the driver
+ initializes.
+ __exit Exit code. Ignored for non-modular drivers.
+
+
+ __devinit Device initialization code.
+ Identical to __init if the kernel is not compiled
+ with CONFIG_HOTPLUG, normal function otherwise.
+ __devexit The same for __exit.
+
+Tips on when/where to use the above attributes:
+ o The module_init()/module_exit() functions (and all
+ initialization functions called _only_ from these)
+ should be marked __init/__exit.
+
+ o Do not mark the struct pci_driver.
+
+ o The ID table array should be marked __devinitconst; this is done
+ automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
+
+ o The probe() and remove() functions should be marked __devinit
+ and __devexit respectively. All initialization functions
+ exclusively called by the probe() routine, can be marked __devinit.
+ Ditto for remove() and __devexit.
+
+ o If mydriver_remove() is marked with __devexit(), then all address
+ references to mydriver_remove must use __devexit_p(mydriver_remove)
+ (in the struct pci_driver declaration for example).
+ __devexit_p() will generate the function name _or_ NULL if the
+ function will be discarded. For an example, see drivers/net/tg3.c.
+
+ o Do NOT mark a function if you are not sure which mark to use.
+ Better to not mark the function than mark the function wrong.
+
+
+
+2. How to find PCI devices manually
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+PCI drivers should have a really good reason for not using the
+pci_register_driver() interface to search for PCI devices.
+The main reason PCI devices are controlled by multiple drivers
+is because one PCI device implements several different HW services.
+E.g. combined serial/parallel port/floppy controller.
+
+A manual search may be performed using the following constructs:
+
+Searching by vendor and device ID:
+
+ struct pci_dev *dev = NULL;
+ while (dev = pci_get_device(VENDOR_ID, DEVICE_ID, dev))
+ configure_device(dev);
+
+Searching by class ID (iterate in a similar way):
+
+ pci_get_class(CLASS_ID, dev)
+
+Searching by both vendor/device and subsystem vendor/device ID:
+
+ pci_get_subsys(VENDOR_ID,DEVICE_ID, SUBSYS_VENDOR_ID, SUBSYS_DEVICE_ID, dev).
+
+You can use the constant PCI_ANY_ID as a wildcard replacement for
+VENDOR_ID or DEVICE_ID. This allows searching for any device from a
+specific vendor, for example.
+
+These functions are hotplug-safe. They increment the reference count on
+the pci_dev that they return. You must eventually (possibly at module unload)
+decrement the reference count on these devices by calling pci_dev_put().
+
+
+
+3. Device Initialization Steps
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+As noted in the introduction, most PCI drivers need the following steps
+for device initialization:
+
+ Enable the device
+ Request MMIO/IOP resources
+ Set the DMA mask size (for both coherent and streaming DMA)
+ Allocate and initialize shared control data (pci_allocate_coherent())
+ Access device configuration space (if needed)
+ Register IRQ handler (request_irq())
+ Initialize non-PCI (i.e. LAN/SCSI/etc parts of the chip)
+ Enable DMA/processing engines.
+
+The driver can access PCI config space registers at any time.
+(Well, almost. When running BIST, config space can go away...but
+that will just result in a PCI Bus Master Abort and config reads
+will return garbage).
+
+
+3.1 Enable the PCI device
+~~~~~~~~~~~~~~~~~~~~~~~~~
+Before touching any device registers, the driver needs to enable
+the PCI device by calling pci_enable_device(). This will:
+ o wake up the device if it was in suspended state,
+ o allocate I/O and memory regions of the device (if BIOS did not),
+ o allocate an IRQ (if BIOS did not).
+
+NOTE: pci_enable_device() can fail! Check the return value.
+
+[ OS BUG: we don't check resource allocations before enabling those
+ resources. The sequence would make more sense if we called
+ pci_request_resources() before calling pci_enable_device().
+ Currently, the device drivers can't detect the bug when when two
+ devices have been allocated the same range. This is not a common
+ problem and unlikely to get fixed soon.
+
+ This has been discussed before but not changed as of 2.6.19:
+ http://lkml.org/lkml/2006/3/2/194
+]
+
+pci_set_master() will enable DMA by setting the bus master bit
+in the PCI_COMMAND register. It also fixes the latency timer value if
+it's set to something bogus by the BIOS.
+
+If the PCI device can use the PCI Memory-Write-Invalidate transaction,
+call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval
+and also ensures that the cache line size register is set correctly.
+Check the return value of pci_set_mwi() as not all architectures
+or chip-sets may support Memory-Write-Invalidate. Alternatively,
+if Mem-Wr-Inval would be nice to have but is not required, call
+pci_try_set_mwi() to have the system do its best effort at enabling
+Mem-Wr-Inval.
+
+
+3.2 Request MMIO/IOP resources
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Memory (MMIO), and I/O port addresses should NOT be read directly
+from the PCI device config space. Use the values in the pci_dev structure
+as the PCI "bus address" might have been remapped to a "host physical"
+address by the arch/chip-set specific kernel support.
+
+See Documentation/IO-mapping.txt for how to access device registers
+or device memory.
+
+The device driver needs to call pci_request_region() to verify
+no other device is already using the same address resource.
+Conversely, drivers should call pci_release_region() AFTER
+calling pci_disable_device().
+The idea is to prevent two devices colliding on the same address range.
+
+[ See OS BUG comment above. Currently (2.6.19), The driver can only
+ determine MMIO and IO Port resource availability _after_ calling
+ pci_enable_device(). ]
+
+Generic flavors of pci_request_region() are request_mem_region()
+(for MMIO ranges) and request_region() (for IO Port ranges).
+Use these for address resources that are not described by "normal" PCI
+BARs.
+
+Also see pci_request_selected_regions() below.
+
+
+3.3 Set the DMA mask size
+~~~~~~~~~~~~~~~~~~~~~~~~~
+[ If anything below doesn't make sense, please refer to
+ Documentation/DMA-API.txt. This section is just a reminder that
+ drivers need to indicate DMA capabilities of the device and is not
+ an authoritative source for DMA interfaces. ]
+
+While all drivers should explicitly indicate the DMA capability
+(e.g. 32 or 64 bit) of the PCI bus master, devices with more than
+32-bit bus master capability for streaming data need the driver
+to "register" this capability by calling pci_set_dma_mask() with
+appropriate parameters. In general this allows more efficient DMA
+on systems where System RAM exists above 4G _physical_ address.
+
+Drivers for all PCI-X and PCIe compliant devices must call
+pci_set_dma_mask() as they are 64-bit DMA devices.
+
+Similarly, drivers must also "register" this capability if the device
+can directly address "consistent memory" in System RAM above 4G physical
+address by calling pci_set_consistent_dma_mask().
+Again, this includes drivers for all PCI-X and PCIe compliant devices.
+Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are
+64-bit DMA capable for payload ("streaming") data but not control
+("consistent") data.
+
+
+3.4 Setup shared control data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared)
+memory. See Documentation/DMA-API.txt for a full description of
+the DMA APIs. This section is just a reminder that it needs to be done
+before enabling DMA on the device.
+
+
+3.5 Initialize device registers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Some drivers will need specific "capability" fields programmed
+or other "vendor specific" register initialized or reset.
+E.g. clearing pending interrupts.
+
+
+3.6 Register IRQ handler
+~~~~~~~~~~~~~~~~~~~~~~~~
+While calling request_irq() is the last step described here,
+this is often just another intermediate step to initialize a device.
+This step can often be deferred until the device is opened for use.
+
+All interrupt handlers for IRQ lines should be registered with IRQF_SHARED
+and use the devid to map IRQs to devices (remember that all PCI IRQ lines
+can be shared).
+
+request_irq() will associate an interrupt handler and device handle
+with an interrupt number. Historically interrupt numbers represent
+IRQ lines which run from the PCI device to the Interrupt controller.
+With MSI and MSI-X (more below) the interrupt number is a CPU "vector".
+
+request_irq() also enables the interrupt. Make sure the device is
+quiesced and does not have any interrupts pending before registering
+the interrupt handler.
+
+MSI and MSI-X are PCI capabilities. Both are "Message Signaled Interrupts"
+which deliver interrupts to the CPU via a DMA write to a Local APIC.
+The fundamental difference between MSI and MSI-X is how multiple
+"vectors" get allocated. MSI requires contiguous blocks of vectors
+while MSI-X can allocate several individual ones.
+
+MSI capability can be enabled by calling pci_enable_msi() or
+pci_enable_msix() before calling request_irq(). This causes
+the PCI support to program CPU vector data into the PCI device
+capability registers.
+
+If your PCI device supports both, try to enable MSI-X first.
+Only one can be enabled at a time. Many architectures, chip-sets,
+or BIOSes do NOT support MSI or MSI-X and the call to pci_enable_msi/msix
+will fail. This is important to note since many drivers have
+two (or more) interrupt handlers: one for MSI/MSI-X and another for IRQs.
+They choose which handler to register with request_irq() based on the
+return value from pci_enable_msi/msix().
+
+There are (at least) two really good reasons for using MSI:
+1) MSI is an exclusive interrupt vector by definition.
+ This means the interrupt handler doesn't have to verify
+ its device caused the interrupt.
+
+2) MSI avoids DMA/IRQ race conditions. DMA to host memory is guaranteed
+ to be visible to the host CPU(s) when the MSI is delivered. This
+ is important for both data coherency and avoiding stale control data.
+ This guarantee allows the driver to omit MMIO reads to flush
+ the DMA stream.
+
+See drivers/infiniband/hw/mthca/ or drivers/net/tg3.c for examples
+of MSI/MSI-X usage.
+
+
+
+4. PCI device shutdown
+~~~~~~~~~~~~~~~~~~~~~~~
+
+When a PCI device driver is being unloaded, most of the following
+steps need to be performed:
+
+ Disable the device from generating IRQs
+ Release the IRQ (free_irq())
+ Stop all DMA activity
+ Release DMA buffers (both streaming and consistent)
+ Unregister from other subsystems (e.g. scsi or netdev)
+ Disable device from responding to MMIO/IO Port addresses
+ Release MMIO/IO Port resource(s)
+
+
+4.1 Stop IRQs on the device
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+How to do this is chip/device specific. If it's not done, it opens
+the possibility of a "screaming interrupt" if (and only if)
+the IRQ is shared with another device.
+
+When the shared IRQ handler is "unhooked", the remaining devices
+using the same IRQ line will still need the IRQ enabled. Thus if the
+"unhooked" device asserts IRQ line, the system will respond assuming
+it was one of the remaining devices asserted the IRQ line. Since none
+of the other devices will handle the IRQ, the system will "hang" until
+it decides the IRQ isn't going to get handled and masks the IRQ (100,000
+iterations later). Once the shared IRQ is masked, the remaining devices
+will stop functioning properly. Not a nice situation.
+
+This is another reason to use MSI or MSI-X if it's available.
+MSI and MSI-X are defined to be exclusive interrupts and thus
+are not susceptible to the "screaming interrupt" problem.
+
+
+4.2 Release the IRQ
+~~~~~~~~~~~~~~~~~~~
+Once the device is quiesced (no more IRQs), one can call free_irq().
+This function will return control once any pending IRQs are handled,
+"unhook" the drivers IRQ handler from that IRQ, and finally release
+the IRQ if no one else is using it.
+
+
+4.3 Stop all DMA activity
+~~~~~~~~~~~~~~~~~~~~~~~~~
+It's extremely important to stop all DMA operations BEFORE attempting
+to deallocate DMA control data. Failure to do so can result in memory
+corruption, hangs, and on some chip-sets a hard crash.
+
+Stopping DMA after stopping the IRQs can avoid races where the
+IRQ handler might restart DMA engines.
+
+While this step sounds obvious and trivial, several "mature" drivers
+didn't get this step right in the past.
+
+
+4.4 Release DMA buffers
+~~~~~~~~~~~~~~~~~~~~~~~
+Once DMA is stopped, clean up streaming DMA first.
+I.e. unmap data buffers and return buffers to "upstream"
+owners if there is one.
+
+Then clean up "consistent" buffers which contain the control data.
+
+See Documentation/DMA-API.txt for details on unmapping interfaces.
+
+
+4.5 Unregister from other subsystems
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Most low level PCI device drivers support some other subsystem
+like USB, ALSA, SCSI, NetDev, Infiniband, etc. Make sure your
+driver isn't losing resources from that other subsystem.
+If this happens, typically the symptom is an Oops (panic) when
+the subsystem attempts to call into a driver that has been unloaded.
+
+
+4.6 Disable Device from responding to MMIO/IO Port addresses
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+io_unmap() MMIO or IO Port resources and then call pci_disable_device().
+This is the symmetric opposite of pci_enable_device().
+Do not access device registers after calling pci_disable_device().
+
+
+4.7 Release MMIO/IO Port Resource(s)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Call pci_release_region() to mark the MMIO or IO Port range as available.
+Failure to do so usually results in the inability to reload the driver.
+
+
+
+5. How to access PCI config space
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+You can use pci_(read|write)_config_(byte|word|dword) to access the config
+space of a device represented by struct pci_dev *. All these functions return 0
+when successful or an error code (PCIBIOS_...) which can be translated to a text
+string by pcibios_strerror. Most drivers expect that accesses to valid PCI
+devices don't fail.
+
+If you don't have a struct pci_dev available, you can call
+pci_bus_(read|write)_config_(byte|word|dword) to access a given device
+and function on that bus.
+
+If you access fields in the standard portion of the config header, please
+use symbolic names of locations and bits declared in <linux/pci.h>.
+
+If you need to access Extended PCI Capability registers, just call
+pci_find_capability() for the particular capability and it will find the
+corresponding register block for you.
+
+
+
+6. Other interesting functions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+pci_find_slot() Find pci_dev corresponding to given bus and
+ slot numbers.
+pci_set_power_state() Set PCI Power Management state (0=D0 ... 3=D3)
+pci_find_capability() Find specified capability in device's capability
+ list.
+pci_resource_start() Returns bus start address for a given PCI region
+pci_resource_end() Returns bus end address for a given PCI region
+pci_resource_len() Returns the byte length of a PCI region
+pci_set_drvdata() Set private driver data pointer for a pci_dev
+pci_get_drvdata() Return private driver data pointer for a pci_dev
+pci_set_mwi() Enable Memory-Write-Invalidate transactions.
+pci_clear_mwi() Disable Memory-Write-Invalidate transactions.
+
+
+
+7. Miscellaneous hints
+~~~~~~~~~~~~~~~~~~~~~~
+
+When displaying PCI device names to the user (for example when a driver wants
+to tell the user what card has it found), please use pci_name(pci_dev).
+
+Always refer to the PCI devices by a pointer to the pci_dev structure.
+All PCI layer functions use this identification and it's the only
+reasonable one. Don't use bus/slot/function numbers except for very
+special purposes -- on systems with multiple primary buses their semantics
+can be pretty complex.
+
+Don't try to turn on Fast Back to Back writes in your driver. All devices
+on the bus need to be capable of doing it, so this is something which needs
+to be handled by platform and generic code, not individual drivers.
+
+
+
+8. Vendor and device identifications
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+One is not not required to add new device ids to include/linux/pci_ids.h.
+Please add PCI_VENDOR_ID_xxx for vendors and a hex constant for device ids.
+
+PCI_VENDOR_ID_xxx constants are re-used. The device ids are arbitrary
+hex numbers (vendor controlled) and normally used only in a single
+location, the pci_device_id table.
+
+Please DO submit new vendor/device ids to pciids.sourceforge.net project.
+
+
+
+9. Obsolete functions
+~~~~~~~~~~~~~~~~~~~~~
+
+There are several functions which you might come across when trying to
+port an old driver to the new PCI interface. They are no longer present
+in the kernel as they aren't compatible with hotplug or PCI domains or
+having sane locking.
+
+pci_find_device() Superseded by pci_get_device()
+pci_find_subsys() Superseded by pci_get_subsys()
+pci_find_slot() Superseded by pci_get_slot()
+
+
+The alternative is the traditional PCI device driver that walks PCI
+device lists. This is still possible but discouraged.
+
+
+
+10. MMIO Space and "Write Posting"
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Converting a driver from using I/O Port space to using MMIO space
+often requires some additional changes. Specifically, "write posting"
+needs to be handled. Many drivers (e.g. tg3, acenic, sym53c8xx_2)
+already do this. I/O Port space guarantees write transactions reach the PCI
+device before the CPU can continue. Writes to MMIO space allow the CPU
+to continue before the transaction reaches the PCI device. HW weenies
+call this "Write Posting" because the write completion is "posted" to
+the CPU before the transaction has reached its destination.
+
+Thus, timing sensitive code should add readl() where the CPU is
+expected to wait before doing other work. The classic "bit banging"
+sequence works fine for I/O Port space:
+
+ for (i = 8; --i; val >>= 1) {
+ outb(val & 1, ioport_reg); /* write bit */
+ udelay(10);
+ }
+
+The same sequence for MMIO space should be:
+
+ for (i = 8; --i; val >>= 1) {
+ writeb(val & 1, mmio_reg); /* write bit */
+ readb(safe_mmio_reg); /* flush posted write */
+ udelay(10);
+ }
+
+It is important that "safe_mmio_reg" not have any side effects that
+interferes with the correct operation of the device.
+
+Another case to watch out for is when resetting a PCI device. Use PCI
+Configuration space reads to flush the writel(). This will gracefully
+handle the PCI master abort on all platforms if the PCI device is
+expected to not respond to a readl(). Most x86 platforms will allow
+MMIO reads to master abort (a.k.a. "Soft Fail") and return garbage
+(e.g. ~0). But many RISC platforms will crash (a.k.a."Hard Fail").
+
diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt
new file mode 100644
index 0000000..16c2512
--- /dev/null
+++ b/Documentation/PCI/pcieaer-howto.txt
@@ -0,0 +1,253 @@
+ The PCI Express Advanced Error Reporting Driver Guide HOWTO
+ T. Long Nguyen <tom.l.nguyen@intel.com>
+ Yanmin Zhang <yanmin.zhang@intel.com>
+ 07/29/2006
+
+
+1. Overview
+
+1.1 About this guide
+
+This guide describes the basics of the PCI Express Advanced Error
+Reporting (AER) driver and provides information on how to use it, as
+well as how to enable the drivers of endpoint devices to conform with
+PCI Express AER driver.
+
+1.2 Copyright © Intel Corporation 2006.
+
+1.3 What is the PCI Express AER Driver?
+
+PCI Express error signaling can occur on the PCI Express link itself
+or on behalf of transactions initiated on the link. PCI Express
+defines two error reporting paradigms: the baseline capability and
+the Advanced Error Reporting capability. The baseline capability is
+required of all PCI Express components providing a minimum defined
+set of error reporting requirements. Advanced Error Reporting
+capability is implemented with a PCI Express advanced error reporting
+extended capability structure providing more robust error reporting.
+
+The PCI Express AER driver provides the infrastructure to support PCI
+Express Advanced Error Reporting capability. The PCI Express AER
+driver provides three basic functions:
+
+- Gathers the comprehensive error information if errors occurred.
+- Reports error to the users.
+- Performs error recovery actions.
+
+AER driver only attaches root ports which support PCI-Express AER
+capability.
+
+
+2. User Guide
+
+2.1 Include the PCI Express AER Root Driver into the Linux Kernel
+
+The PCI Express AER Root driver is a Root Port service driver attached
+to the PCI Express Port Bus driver. If a user wants to use it, the driver
+has to be compiled. Option CONFIG_PCIEAER supports this capability. It
+depends on CONFIG_PCIEPORTBUS, so pls. set CONFIG_PCIEPORTBUS=y and
+CONFIG_PCIEAER = y.
+
+2.2 Load PCI Express AER Root Driver
+There is a case where a system has AER support in BIOS. Enabling the AER
+Root driver and having AER support in BIOS may result unpredictable
+behavior. To avoid this conflict, a successful load of the AER Root driver
+requires ACPI _OSC support in the BIOS to allow the AER Root driver to
+request for native control of AER. See the PCI FW 3.0 Specification for
+details regarding OSC usage. Currently, lots of firmwares don't provide
+_OSC support while they use PCI Express. To support such firmwares,
+forceload, a parameter of type bool, could enable AER to continue to
+be initiated although firmwares have no _OSC support. To enable the
+walkaround, pls. add aerdriver.forceload=y to kernel boot parameter line
+when booting kernel. Note that forceload=n by default.
+
+2.3 AER error output
+When a PCI-E AER error is captured, an error message will be outputed to
+console. If it's a correctable error, it is outputed as a warning.
+Otherwise, it is printed as an error. So users could choose different
+log level to filter out correctable error messages.
+
+Below shows an example.
++------ PCI-Express Device Error -----+
+Error Severity : Uncorrected (Fatal)
+PCIE Bus Error type : Transaction Layer
+Unsupported Request : First
+Requester ID : 0500
+VendorID=8086h, DeviceID=0329h, Bus=05h, Device=00h, Function=00h
+TLB Header:
+04000001 00200a03 05010000 00050100
+
+In the example, 'Requester ID' means the ID of the device who sends
+the error message to root port. Pls. refer to pci express specs for
+other fields.
+
+
+3. Developer Guide
+
+To enable AER aware support requires a software driver to configure
+the AER capability structure within its device and to provide callbacks.
+
+To support AER better, developers need understand how AER does work
+firstly.
+
+PCI Express errors are classified into two types: correctable errors
+and uncorrectable errors. This classification is based on the impacts
+of those errors, which may result in degraded performance or function
+failure.
+
+Correctable errors pose no impacts on the functionality of the
+interface. The PCI Express protocol can recover without any software
+intervention or any loss of data. These errors are detected and
+corrected by hardware. Unlike correctable errors, uncorrectable
+errors impact functionality of the interface. Uncorrectable errors
+can cause a particular transaction or a particular PCI Express link
+to be unreliable. Depending on those error conditions, uncorrectable
+errors are further classified into non-fatal errors and fatal errors.
+Non-fatal errors cause the particular transaction to be unreliable,
+but the PCI Express link itself is fully functional. Fatal errors, on
+the other hand, cause the link to be unreliable.
+
+When AER is enabled, a PCI Express device will automatically send an
+error message to the PCIE root port above it when the device captures
+an error. The Root Port, upon receiving an error reporting message,
+internally processes and logs the error message in its PCI Express
+capability structure. Error information being logged includes storing
+the error reporting agent's requestor ID into the Error Source
+Identification Registers and setting the error bits of the Root Error
+Status Register accordingly. If AER error reporting is enabled in Root
+Error Command Register, the Root Port generates an interrupt if an
+error is detected.
+
+Note that the errors as described above are related to the PCI Express
+hierarchy and links. These errors do not include any device specific
+errors because device specific errors will still get sent directly to
+the device driver.
+
+3.1 Configure the AER capability structure
+
+AER aware drivers of PCI Express component need change the device
+control registers to enable AER. They also could change AER registers,
+including mask and severity registers. Helper function
+pci_enable_pcie_error_reporting could be used to enable AER. See
+section 3.3.
+
+3.2. Provide callbacks
+
+3.2.1 callback reset_link to reset pci express link
+
+This callback is used to reset the pci express physical link when a
+fatal error happens. The root port aer service driver provides a
+default reset_link function, but different upstream ports might
+have different specifications to reset pci express link, so all
+upstream ports should provide their own reset_link functions.
+
+In struct pcie_port_service_driver, a new pointer, reset_link, is
+added.
+
+pci_ers_result_t (*reset_link) (struct pci_dev *dev);
+
+Section 3.2.2.2 provides more detailed info on when to call
+reset_link.
+
+3.2.2 PCI error-recovery callbacks
+
+The PCI Express AER Root driver uses error callbacks to coordinate
+with downstream device drivers associated with a hierarchy in question
+when performing error recovery actions.
+
+Data struct pci_driver has a pointer, err_handler, to point to
+pci_error_handlers who consists of a couple of callback function
+pointers. AER driver follows the rules defined in
+pci-error-recovery.txt except pci express specific parts (e.g.
+reset_link). Pls. refer to pci-error-recovery.txt for detailed
+definitions of the callbacks.
+
+Below sections specify when to call the error callback functions.
+
+3.2.2.1 Correctable errors
+
+Correctable errors pose no impacts on the functionality of
+the interface. The PCI Express protocol can recover without any
+software intervention or any loss of data. These errors do not
+require any recovery actions. The AER driver clears the device's
+correctable error status register accordingly and logs these errors.
+
+3.2.2.2 Non-correctable (non-fatal and fatal) errors
+
+If an error message indicates a non-fatal error, performing link reset
+at upstream is not required. The AER driver calls error_detected(dev,
+pci_channel_io_normal) to all drivers associated within a hierarchy in
+question. for example,
+EndPoint<==>DownstreamPort B<==>UpstreamPort A<==>RootPort.
+If Upstream port A captures an AER error, the hierarchy consists of
+Downstream port B and EndPoint.
+
+A driver may return PCI_ERS_RESULT_CAN_RECOVER,
+PCI_ERS_RESULT_DISCONNECT, or PCI_ERS_RESULT_NEED_RESET, depending on
+whether it can recover or the AER driver calls mmio_enabled as next.
+
+If an error message indicates a fatal error, kernel will broadcast
+error_detected(dev, pci_channel_io_frozen) to all drivers within
+a hierarchy in question. Then, performing link reset at upstream is
+necessary. As different kinds of devices might use different approaches
+to reset link, AER port service driver is required to provide the
+function to reset link. Firstly, kernel looks for if the upstream
+component has an aer driver. If it has, kernel uses the reset_link
+callback of the aer driver. If the upstream component has no aer driver
+and the port is downstream port, we will use the aer driver of the
+root port who reports the AER error. As for upstream ports,
+they should provide their own aer service drivers with reset_link
+function. If error_detected returns PCI_ERS_RESULT_CAN_RECOVER and
+reset_link returns PCI_ERS_RESULT_RECOVERED, the error handling goes
+to mmio_enabled.
+
+3.3 helper functions
+
+3.3.1 int pci_find_aer_capability(struct pci_dev *dev);
+pci_find_aer_capability locates the PCI Express AER capability
+in the device configuration space. If the device doesn't support
+PCI-Express AER, the function returns 0.
+
+3.3.2 int pci_enable_pcie_error_reporting(struct pci_dev *dev);
+pci_enable_pcie_error_reporting enables the device to send error
+messages to root port when an error is detected. Note that devices
+don't enable the error reporting by default, so device drivers need
+call this function to enable it.
+
+3.3.3 int pci_disable_pcie_error_reporting(struct pci_dev *dev);
+pci_disable_pcie_error_reporting disables the device to send error
+messages to root port when an error is detected.
+
+3.3.4 int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);
+pci_cleanup_aer_uncorrect_error_status cleanups the uncorrectable
+error status register.
+
+3.4 Frequent Asked Questions
+
+Q: What happens if a PCI Express device driver does not provide an
+error recovery handler (pci_driver->err_handler is equal to NULL)?
+
+A: The devices attached with the driver won't be recovered. If the
+error is fatal, kernel will print out warning messages. Please refer
+to section 3 for more information.
+
+Q: What happens if an upstream port service driver does not provide
+callback reset_link?
+
+A: Fatal error recovery will fail if the errors are reported by the
+upstream ports who are attached by the service driver.
+
+Q: How does this infrastructure deal with driver that is not PCI
+Express aware?
+
+A: This infrastructure calls the error callback functions of the
+driver when an error happens. But if the driver is not aware of
+PCI Express, the device might not report its own errors to root
+port.
+
+Q: What modifications will that driver need to make it compatible
+with the PCI Express AER Root driver?
+
+A: It could call the helper functions to enable AER in devices and
+cleanup uncorrectable status register. Pls. refer to section 3.3.
+