Merge branch 'master'

6 files changed, 20 insertions, 35 deletions

diff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt
index 11fd0ef..a9ad58b 100644
--- a/Documentation/networking/driver.txt
+++ b/Documentation/networking/driver.txt
@@ -1,7 +1,4 @@
-Documents about softnet driver issues in general can be found
-at:
-
-	http://www.firstfloor.org/~andi/softnet/
+Document about softnet driver issues
 
 Transmit path guidelines:
 
diff --git a/Documentation/networking/ifenslave.c b/Documentation/networking/ifenslave.c
index f315d20..545447a 100644
--- a/Documentation/networking/ifenslave.c
+++ b/Documentation/networking/ifenslave.c
@@ -693,13 +693,7 @@ static int enslave(char *master_ifname, char *slave_ifname)
 		/* Older bonding versions would panic if the slave has no IP
 		 * address, so get the IP setting from the master.
 		 */
-		res = set_if_addr(master_ifname, slave_ifname);
-		if (res) {
-			fprintf(stderr,
-				"Slave '%s': Error: set address failed\n",
-				slave_ifname);
-			return res;
-		}
+		set_if_addr(master_ifname, slave_ifname);
 	} else {
 		res = clear_if_addr(slave_ifname);
 		if (res) {
@@ -1085,7 +1079,6 @@ static int set_if_addr(char *master_ifname, char *slave_ifname)
 				slave_ifname, ifra[i].req_name,
 				strerror(saved_errno));
 
-			return res;
 		}
 
 		ipaddr = ifr.ifr_addr.sa_data;
diff --git a/Documentation/networking/iphase.txt b/Documentation/networking/iphase.txt
index 39ccb85..493203a 100644
--- a/Documentation/networking/iphase.txt
+++ b/Documentation/networking/iphase.txt
@@ -22,7 +22,7 @@ The features and limitations of this driver are as follows:
     - All variants of Interphase ATM PCI (i)Chip adapter cards are supported, 
       including x575 (OC3, control memory 128K , 512K and packet memory 128K, 
       512K and 1M), x525 (UTP25) and x531 (DS3 and E3). See 
-           http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM 
+      http://www.iphase.com/site/iphase-web/?epi_menuItemID=e196f04b4b3b40502f150882e21046a0
       for details.
     - Only x86 platforms are supported.
     - SMP is supported.
diff --git a/Documentation/networking/irda.txt b/Documentation/networking/irda.txt
index 9e5b8e6..bff26c1 100644
--- a/Documentation/networking/irda.txt
+++ b/Documentation/networking/irda.txt
@@ -3,12 +3,8 @@ of the IrDA Utilities. More detailed information about these and associated
 programs can be found on http://irda.sourceforge.net/
 
 For more information about how to use the IrDA protocol stack, see the
-Linux Infared HOWTO (http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html)
-by Werner Heuser <wehe@tuxmobil.org>
+Linux Infrared HOWTO by Werner Heuser <wehe@tuxmobil.org>:
+<http://www.tuxmobil.org/Infrared-HOWTO/Infrared-HOWTO.html>
 
 There is an active mailing list for discussing Linux-IrDA matters called
     irda-users@lists.sourceforge.net
-
-
-
-
diff --git a/Documentation/networking/ray_cs.txt b/Documentation/networking/ray_cs.txt
index b1def00..5427f8c 100644
--- a/Documentation/networking/ray_cs.txt
+++ b/Documentation/networking/ray_cs.txt
@@ -29,8 +29,7 @@ with nondefault parameters, they can be edited in
 will find them all.
 
 Information on card services is available at:
-	ftp://hyper.stanford.edu/pub/pcmcia/doc
-        http://hyper.stanford.edu/HyperNews/get/pcmcia/home.html
+	http://pcmcia-cs.sourceforge.net/
 
 
 Card services user programs are still required for PCMCIA devices.
diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt
index 80e1cb1..3759acf 100644
--- a/Documentation/networking/vortex.txt
+++ b/Documentation/networking/vortex.txt
@@ -11,7 +11,7 @@ The driver was written by Donald Becker <becker@scyld.com>
 Don is no longer the prime maintainer of this version of the driver. 
 Please report problems to one or more of:
 
-  Andrew Morton <andrewm@uow.edu.au>
+  Andrew Morton <akpm@osdl.org>
   Netdev mailing list <netdev@vger.kernel.org>
   Linux kernel mailing list <linux-kernel@vger.kernel.org>
 
@@ -274,24 +274,24 @@ Details of the device driver implementation are at the top of the source file.
 
 Additional documentation is available at Don Becker's Linux Drivers site:
 
-  http://www.scyld.com/network/vortex.html
+     http://www.scyld.com/vortex.html
 
 Donald Becker's driver development site:
 
-     http://www.scyld.com/network
+     http://www.scyld.com/network.html
 
 Donald's vortex-diag program is useful for inspecting the NIC's state:
 
-     http://www.scyld.com/diag/#pci-diags
+     http://www.scyld.com/ethercard_diag.html
 
 Donald's mii-diag program may be used for inspecting and manipulating
 the NIC's Media Independent Interface subsystem:
 
-     http://www.scyld.com/diag/#mii-diag
+     http://www.scyld.com/ethercard_diag.html#mii-diag
 
 Donald's wake-on-LAN page:
 
-     http://www.scyld.com/expert/wake-on-lan.html
+     http://www.scyld.com/wakeonlan.html
 
 3Com's documentation for many NICs, including the ones supported by
 this driver is available at 
@@ -305,7 +305,7 @@ this driver is available at
 Driver updates and a detailed changelog for the modifications which
 were made for the 2.3/2,4 series kernel is available at
 
-     http://www.uow.edu.au/~andrewm/linux/#3c59x-2.3
+     http://www.zip.com.au/~akpm/linux/#3c59x-bc
 
 
 Autonegotiation notes
@@ -434,8 +434,8 @@ steps you should take:
          send all logs to the maintainer.
 
       3) Download you card's diagnostic tool from Donald
-         Backer's website http://www.scyld.com/diag.  Download
-         mii-diag.c as well.  Build these.
+         Becker's website <http://www.scyld.com/ethercard_diag.html>.
+         Download mii-diag.c as well.  Build these.
 
          a) Run 'vortex-diag -aaee' and 'mii-diag -v' when the card is
             working correctly.  Save the output.
@@ -443,8 +443,8 @@ steps you should take:
          b) Run the above commands when the card is malfunctioning.  Send
             both sets of output.
 
-Finally, please be patient and be prepared to do some work.  You may end up working on
-this problem for a week or more as the maintainer asks more questions, asks for more
-tests, asks for patches to be applied, etc.  At the end of it all, the problem may even
-remain unresolved.
-
+Finally, please be patient and be prepared to do some work.  You may
+end up working on this problem for a week or more as the maintainer
+asks more questions, asks for more tests, asks for patches to be
+applied, etc.  At the end of it all, the problem may even remain
+unresolved.