Merge branch 'imx-board-ifdefs' into imx-for-2.6.39

3 files changed, 4 insertions, 29 deletions

diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index 88b97d6..e40eb6e 100644
--- a/arch/arm/mach-mx3/mach-mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -73,8 +73,7 @@
  * This file contains the board-specific initialization routines.
  */
 
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-/*!
+/*
  * The serial port definition structure.
  */
 static struct plat_serial8250_port serial_platform_data[] = {
@@ -110,14 +109,7 @@ static int __init mxc_init_extuart(void)
 {
 	return platform_device_register(&serial_device);
 }
-#else
-static inline int mxc_init_extuart(void)
-{
-	return 0;
-}
-#endif
 
-#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -134,11 +126,6 @@ static inline void mxc_init_imx_uart(void)
 	mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
 	imx31_add_imx_uart0(&uart_pdata);
 }
-#else /* !SERIAL_IMX */
-static inline void mxc_init_imx_uart(void)
-{
-}
-#endif /* !SERIAL_IMX */
 
 static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -476,7 +463,6 @@ static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
 };
 #endif
 
-#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
 static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
 #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
 	{
@@ -497,11 +483,6 @@ static void mxc_init_i2c(void)
 
 	imx31_add_imx_i2c1(NULL);
 }
-#else
-static void mxc_init_i2c(void)
-{
-}
-#endif
 
 static unsigned int ssi_pins[] = {
 	MX31_PIN_SFS5__SFS5,
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index fda5654..df6fb07 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -180,9 +180,7 @@ static int __init eet_init_devices(void)
 
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 	imx31_add_spi_imx0(&pcm037_spi1_pdata);
-#endif
 
 	platform_device_register(&pcm037_gpio_keys_device);
 
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index bcf83fc..a515290f 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -115,7 +115,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
 static const struct imxi2c_platform_data pcm043_i2c0_data __initconst = {
 	.bitrate = 50000,
 };
@@ -134,7 +133,6 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
 		I2C_BOARD_INFO("pcf8563", 0x51),
 	}
 };
-#endif
 
 static struct platform_device *devices[] __initdata = {
 	&pcm043_flash,
@@ -312,13 +310,13 @@ static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
+#endif
 
 static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
 	.portsc	= MXC_EHCI_MODE_SERIAL,
 	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
 		  MXC_EHCI_IPPUE_DOWN,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -369,12 +367,10 @@ static void __init mxc_board_init(void)
 
 	imx35_add_imx_uart1(&uart_pdata);
 
-#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
 	i2c_register_board_info(0, pcm043_i2c_devices,
 			ARRAY_SIZE(pcm043_i2c_devices));
 
 	imx35_add_imx_i2c0(&pcm043_i2c0_data);
-#endif
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
@@ -386,9 +382,9 @@ static void __init mxc_board_init(void)
 
 		imx35_add_mxc_ehci_otg(&otg_pdata);
 	}
-
-	imx35_add_mxc_ehci_hs(&usbh1_pdata);
 #endif
+	imx35_add_mxc_ehci_hs(&usbh1_pdata);
+
 	if (!otg_mode_host)
 		imx35_add_fsl_usb2_udc(&otg_device_pdata);