Merge branch 'ux500/delete-u5500' into next/soc

Conflicts:
	arch/arm/mach-ux500/cache-l2x0.c
	arch/arm/mach-ux500/clock.c
	arch/arm/mach-ux500/cpu.c
	arch/arm/mach-ux500/mbox-db5500.c
	arch/arm/mach-ux500/platsmp.c
	arch/arm/mach-ux500/timer.c

Resolve lots of identical conflicts between the removal of
u5500 and the addition of u8540.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

10 files changed, 2 insertions, 387 deletions

diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
deleted file mode 100644
index 8e714bc..0000000
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_DB5500_REGS_H
-#define __MACH_DB5500_REGS_H
-
-#define U5500_PER1_BASE		0xA0020000
-#define U5500_PER2_BASE		0xA0010000
-#define U5500_PER3_BASE		0x80140000
-#define U5500_PER4_BASE		0x80150000
-#define U5500_PER5_BASE		0x80100000
-#define U5500_PER6_BASE		0x80120000
-
-#define U5500_GIC_DIST_BASE	0xA0411000
-#define U5500_GIC_CPU_BASE	0xA0410100
-#define U5500_DMA_BASE		0x90030000
-#define U5500_STM_BASE		0x90020000
-#define U5500_STM_REG_BASE	(U5500_STM_BASE + 0xF000)
-#define U5500_MCDE_BASE		0xA0400000
-#define U5500_MODEM_BASE	0xB0000000
-#define U5500_L2CC_BASE		0xA0412000
-#define U5500_SCU_BASE		0xA0410000
-#define U5500_DSI1_BASE		0xA0401000
-#define U5500_DSI2_BASE		0xA0402000
-#define U5500_SIA_BASE		0xA0100000
-#define U5500_SVA_BASE		0x80200000
-#define U5500_HSEM_BASE		0xA0000000
-#define U5500_NAND0_BASE	0x60000000
-#define U5500_NAND1_BASE	0x70000000
-#define U5500_TWD_BASE		0xa0410600
-#define U5500_ICN_BASE		0xA0040000
-#define U5500_B2R2_BASE		0xa0200000
-#define U5500_BOOT_ROM_BASE	0x90000000
-
-#define U5500_FSMC_BASE		(U5500_PER1_BASE + 0x0000)
-#define U5500_SDI0_BASE		(U5500_PER1_BASE + 0x1000)
-#define U5500_SDI2_BASE		(U5500_PER1_BASE + 0x2000)
-#define U5500_UART0_BASE	(U5500_PER1_BASE + 0x3000)
-#define U5500_I2C1_BASE		(U5500_PER1_BASE + 0x4000)
-#define U5500_MSP0_BASE		(U5500_PER1_BASE + 0x5000)
-#define U5500_GPIO0_BASE	(U5500_PER1_BASE + 0xE000)
-#define U5500_CLKRST1_BASE	(U5500_PER1_BASE + 0xF000)
-
-#define U5500_USBOTG_BASE	(U5500_PER2_BASE + 0x0000)
-#define U5500_GPIO1_BASE	(U5500_PER2_BASE + 0xE000)
-#define U5500_CLKRST2_BASE	(U5500_PER2_BASE + 0xF000)
-
-#define U5500_KEYPAD_BASE	(U5500_PER3_BASE + 0x0000)
-#define U5500_PWM_BASE		(U5500_PER3_BASE + 0x1000)
-#define U5500_GPIO3_BASE	(U5500_PER3_BASE + 0xE000)
-#define U5500_CLKRST3_BASE	(U5500_PER3_BASE + 0xF000)
-
-#define U5500_BACKUPRAM0_BASE	(U5500_PER4_BASE + 0x0000)
-#define U5500_BACKUPRAM1_BASE	(U5500_PER4_BASE + 0x1000)
-#define U5500_RTT0_BASE		(U5500_PER4_BASE + 0x2000)
-#define U5500_RTT1_BASE		(U5500_PER4_BASE + 0x3000)
-#define U5500_RTC_BASE		(U5500_PER4_BASE + 0x4000)
-#define U5500_SCR_BASE		(U5500_PER4_BASE + 0x5000)
-#define U5500_DMC_BASE		(U5500_PER4_BASE + 0x6000)
-#define U5500_PRCMU_BASE	(U5500_PER4_BASE + 0x7000)
-#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338)
-#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
-#define U5500_MSP1_BASE		(U5500_PER4_BASE + 0x9000)
-#define U5500_GPIO2_BASE	(U5500_PER4_BASE + 0xA000)
-#define U5500_MTIMER_BASE	(U5500_PER4_BASE + 0xC000)
-#define U5500_CDETECT_BASE	(U5500_PER4_BASE + 0xF000)
-#define U5500_PRCMU_TCDM_BASE	(U5500_PER4_BASE + 0x18000)
-#define U5500_PRCMU_TCPM_BASE	(U5500_PER4_BASE + 0x10000)
-#define U5500_TPIU_BASE		(U5500_PER4_BASE + 0x50000)
-
-#define U5500_SPI0_BASE		(U5500_PER5_BASE + 0x0000)
-#define U5500_SPI1_BASE		(U5500_PER5_BASE + 0x1000)
-#define U5500_SPI2_BASE		(U5500_PER5_BASE + 0x2000)
-#define U5500_SPI3_BASE		(U5500_PER5_BASE + 0x3000)
-#define U5500_UART1_BASE	(U5500_PER5_BASE + 0x4000)
-#define U5500_UART2_BASE	(U5500_PER5_BASE + 0x5000)
-#define U5500_UART3_BASE	(U5500_PER5_BASE + 0x6000)
-#define U5500_SDI1_BASE		(U5500_PER5_BASE + 0x7000)
-#define U5500_SDI3_BASE		(U5500_PER5_BASE + 0x8000)
-#define U5500_SDI4_BASE		(U5500_PER5_BASE + 0x9000)
-#define U5500_I2C2_BASE		(U5500_PER5_BASE + 0xA000)
-#define U5500_I2C3_BASE		(U5500_PER5_BASE + 0xB000)
-#define U5500_MSP2_BASE		(U5500_PER5_BASE + 0xC000)
-#define U5500_IRDA_BASE		(U5500_PER5_BASE + 0xD000)
-#define U5500_IRRC_BASE		(U5500_PER5_BASE + 0x10000)
-#define U5500_GPIO4_BASE	(U5500_PER5_BASE + 0x1E000)
-#define U5500_CLKRST5_BASE	(U5500_PER5_BASE + 0x1F000)
-
-#define U5500_RNG_BASE		(U5500_PER6_BASE + 0x0000)
-#define U5500_HASH0_BASE	(U5500_PER6_BASE + 0x1000)
-#define U5500_HASH1_BASE	(U5500_PER6_BASE + 0x2000)
-#define U5500_PKA_BASE		(U5500_PER6_BASE + 0x4000)
-#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5100)
-#define U5500_MTU0_BASE		(U5500_PER6_BASE + 0x6000)
-#define U5500_MTU1_BASE		(U5500_PER6_BASE + 0x7000)
-#define U5500_CR_BASE		(U5500_PER6_BASE + 0x8000)
-#define U5500_CRYP0_BASE	(U5500_PER6_BASE + 0xA000)
-#define U5500_CRYP1_BASE	(U5500_PER6_BASE + 0xB000)
-#define U5500_CLKRST6_BASE	(U5500_PER6_BASE + 0xF000)
-
-#define U5500_GPIOBANK0_BASE	U5500_GPIO0_BASE
-#define U5500_GPIOBANK1_BASE	(U5500_GPIO0_BASE + 0x80)
-#define U5500_GPIOBANK2_BASE	U5500_GPIO1_BASE
-#define U5500_GPIOBANK3_BASE	U5500_GPIO2_BASE
-#define U5500_GPIOBANK4_BASE	U5500_GPIO3_BASE
-#define U5500_GPIOBANK5_BASE	U5500_GPIO4_BASE
-#define U5500_GPIOBANK6_BASE	(U5500_GPIO4_BASE + 0x80)
-#define U5500_GPIOBANK7_BASE	(U5500_GPIO4_BASE + 0x100)
-
-#define U5500_MBOX_BASE		(U5500_MODEM_BASE + 0xFFD1000)
-#define U5500_MBOX0_PEER_START	(U5500_MBOX_BASE + 0x40)
-#define U5500_MBOX0_PEER_END	(U5500_MBOX_BASE + 0x5F)
-#define U5500_MBOX0_LOCAL_START	(U5500_MBOX_BASE + 0x60)
-#define U5500_MBOX0_LOCAL_END	(U5500_MBOX_BASE + 0x7F)
-#define U5500_MBOX1_PEER_START	(U5500_MBOX_BASE + 0x80)
-#define U5500_MBOX1_PEER_END	(U5500_MBOX_BASE + 0x9F)
-#define U5500_MBOX1_LOCAL_START	(U5500_MBOX_BASE + 0xA0)
-#define U5500_MBOX1_LOCAL_END	(U5500_MBOX_BASE + 0xBF)
-#define U5500_MBOX2_PEER_START	(U5500_MBOX_BASE + 0x00)
-#define U5500_MBOX2_PEER_END	(U5500_MBOX_BASE + 0x1F)
-#define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)
-#define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)
-
-#define U5500_ACCCON_BASE_SEC	(0xBFFF0000)
-#define U5500_ACCCON_BASE		(0xBFFF1000)
-#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
-#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
-#define U5500_INTCON_MBOX1_INT_RESET_ADDR	(0xBFFD31A4)
-
-#define U5500_ESRAM_BASE	        0x40000000
-#define U5500_ESRAM_DMA_LCPA_OFFSET	0x10000
-#define U5500_DMA_LCPA_BASE    (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
-
-#define U5500_MCDE_SIZE		0x1000
-#define U5500_DSI_LINK_SIZE	0x1000
-#define U5500_DSI_LINK_COUNT	0x2
-#define U5500_DSI_LINK1_BASE	(U5500_MCDE_BASE + U5500_MCDE_SIZE)
-#define U5500_DSI_LINK2_BASE	(U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 8d74d92..6703522 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -20,10 +20,6 @@
  * built, so that there's some hint during the build that something is wrong.
  */
 
-#ifdef CONFIG_UX500_SOC_DB5500
-#define __UX500_UART(n)	U5500_UART##n##_BASE
-#endif
-
 #ifdef CONFIG_UX500_SOC_DB8500
 #define __UX500_UART(n)	U8500_UART##n##_BASE
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index 5f6cb71..9b5eb69 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -10,7 +10,6 @@
 struct platform_device;
 struct amba_device;
 
-extern struct platform_device u5500_gpio_devs[];
 extern struct platform_device u8500_gpio_devs[];
 
 extern struct amba_device ux500_pl031_device;
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 8361657..808c1d6 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -31,7 +31,6 @@
 #define io_p2v(n)		__io_address(n)
 
 #include <mach/db8500-regs.h>
-#include <mach/db5500-regs.h>
 
 #define MSP_TX_RX_REG_OFFSET	0
 
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
deleted file mode 100644
index 29d972c..0000000
--- a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_BOARD_U5500_H
-#define __MACH_IRQS_BOARD_U5500_H
-
-#define AB5500_NR_IRQS		5
-#define IRQ_AB5500_BASE		IRQ_BOARD_START
-#define IRQ_AB5500_END		(IRQ_AB5500_BASE + AB5500_NR_IRQS)
-
-#define U5500_IRQ_END		IRQ_AB5500_END
-
-#if IRQ_BOARD_END < U5500_IRQ_END
-#undef IRQ_BOARD_END
-#define IRQ_BOARD_END		U5500_IRQ_END
-#endif
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
deleted file mode 100644
index 7723977..0000000
--- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#ifndef __MACH_IRQS_DB5500_H
-#define __MACH_IRQS_DB5500_H
-
-#define IRQ_DB5500_MTU0			(IRQ_SHPI_START + 4)
-#define IRQ_DB5500_SPI2			(IRQ_SHPI_START + 6)
-#define IRQ_DB5500_PMU0			(IRQ_SHPI_START + 7)
-#define IRQ_DB5500_SPI0			(IRQ_SHPI_START + 8)
-#define IRQ_DB5500_RTT			(IRQ_SHPI_START + 9)
-#define IRQ_DB5500_PKA			(IRQ_SHPI_START + 10)
-#define IRQ_DB5500_UART0		(IRQ_SHPI_START + 11)
-#define IRQ_DB5500_I2C3			(IRQ_SHPI_START + 12)
-#define IRQ_DB5500_L2CC			(IRQ_SHPI_START + 13)
-#define IRQ_DB5500_MSP0			(IRQ_SHPI_START + 14)
-#define IRQ_DB5500_CRYP1		(IRQ_SHPI_START + 15)
-#define IRQ_DB5500_PMU1			(IRQ_SHPI_START + 16)
-#define IRQ_DB5500_MTU1			(IRQ_SHPI_START + 17)
-#define IRQ_DB5500_RTC			(IRQ_SHPI_START + 18)
-#define IRQ_DB5500_UART1		(IRQ_SHPI_START + 19)
-#define IRQ_DB5500_USB_WAKEUP		(IRQ_SHPI_START + 20)
-#define IRQ_DB5500_I2C0			(IRQ_SHPI_START + 21)
-#define IRQ_DB5500_I2C1			(IRQ_SHPI_START + 22)
-#define IRQ_DB5500_USBOTG		(IRQ_SHPI_START + 23)
-#define IRQ_DB5500_DMA_SECURE		(IRQ_SHPI_START + 24)
-#define IRQ_DB5500_DMA			(IRQ_SHPI_START + 25)
-#define IRQ_DB5500_UART2		(IRQ_SHPI_START + 26)
-#define IRQ_DB5500_ICN_PMU1		(IRQ_SHPI_START + 27)
-#define IRQ_DB5500_ICN_PMU2		(IRQ_SHPI_START + 28)
-#define IRQ_DB5500_UART3		(IRQ_SHPI_START + 29)
-#define IRQ_DB5500_SPI3			(IRQ_SHPI_START + 30)
-#define IRQ_DB5500_SDMMC4		(IRQ_SHPI_START + 31)
-#define IRQ_DB5500_IRRC			(IRQ_SHPI_START + 33)
-#define IRQ_DB5500_IRDA_FT		(IRQ_SHPI_START + 34)
-#define IRQ_DB5500_IRDA_SD		(IRQ_SHPI_START + 35)
-#define IRQ_DB5500_IRDA_FI		(IRQ_SHPI_START + 36)
-#define IRQ_DB5500_IRDA_FD		(IRQ_SHPI_START + 37)
-#define IRQ_DB5500_FSMC_CODEREADY	(IRQ_SHPI_START + 38)
-#define IRQ_DB5500_FSMC_NANDWAIT	(IRQ_SHPI_START + 39)
-#define IRQ_DB5500_AB5500		(IRQ_SHPI_START + 40)
-#define IRQ_DB5500_SDMMC2		(IRQ_SHPI_START + 41)
-#define IRQ_DB5500_SIA			(IRQ_SHPI_START + 42)
-#define IRQ_DB5500_SIA2			(IRQ_SHPI_START + 43)
-#define IRQ_DB5500_HVA			(IRQ_SHPI_START + 44)
-#define IRQ_DB5500_HVA2			(IRQ_SHPI_START + 45)
-#define IRQ_DB5500_PRCMU0		(IRQ_SHPI_START + 46)
-#define IRQ_DB5500_PRCMU1		(IRQ_SHPI_START + 47)
-#define IRQ_DB5500_DISP			(IRQ_SHPI_START + 48)
-#define IRQ_DB5500_SDMMC1		(IRQ_SHPI_START + 50)
-#define IRQ_DB5500_MSP1			(IRQ_SHPI_START + 52)
-#define IRQ_DB5500_KBD			(IRQ_SHPI_START + 53)
-#define IRQ_DB5500_I2C2			(IRQ_SHPI_START + 55)
-#define IRQ_DB5500_B2R2			(IRQ_SHPI_START + 56)
-#define IRQ_DB5500_CRYP0		(IRQ_SHPI_START + 57)
-#define IRQ_DB5500_SDMMC3		(IRQ_SHPI_START + 59)
-#define IRQ_DB5500_SDMMC0		(IRQ_SHPI_START + 60)
-#define IRQ_DB5500_HSEM			(IRQ_SHPI_START + 61)
-#define IRQ_DB5500_SBAG			(IRQ_SHPI_START + 63)
-#define IRQ_DB5500_MODEM		(IRQ_SHPI_START + 65)
-#define IRQ_DB5500_SPI1			(IRQ_SHPI_START + 96)
-#define IRQ_DB5500_MSP2			(IRQ_SHPI_START + 98)
-#define IRQ_DB5500_SRPTIMER		(IRQ_SHPI_START + 101)
-#define IRQ_DB5500_CTI0			(IRQ_SHPI_START + 108)
-#define IRQ_DB5500_CTI1			(IRQ_SHPI_START + 109)
-#define IRQ_DB5500_ICN_ERR		(IRQ_SHPI_START + 110)
-#define IRQ_DB5500_MALI_PPMMU		(IRQ_SHPI_START + 112)
-#define IRQ_DB5500_MALI_PP		(IRQ_SHPI_START + 113)
-#define IRQ_DB5500_MALI_GPMMU		(IRQ_SHPI_START + 114)
-#define IRQ_DB5500_MALI_GP		(IRQ_SHPI_START + 115)
-#define IRQ_DB5500_MALI			(IRQ_SHPI_START + 116)
-#define IRQ_DB5500_PRCMU_SEM		(IRQ_SHPI_START + 118)
-#define IRQ_DB5500_GPIO0		(IRQ_SHPI_START + 119)
-#define IRQ_DB5500_GPIO1		(IRQ_SHPI_START + 120)
-#define IRQ_DB5500_GPIO2		(IRQ_SHPI_START + 121)
-#define IRQ_DB5500_GPIO3		(IRQ_SHPI_START + 122)
-#define IRQ_DB5500_GPIO4		(IRQ_SHPI_START + 123)
-#define IRQ_DB5500_GPIO5		(IRQ_SHPI_START + 124)
-#define IRQ_DB5500_GPIO6		(IRQ_SHPI_START + 125)
-#define IRQ_DB5500_GPIO7		(IRQ_SHPI_START + 126)
-
-#ifdef CONFIG_UX500_SOC_DB5500
-
-/*
- * After the GPIO ones we reserve a range of IRQ:s in which virtual
- * IRQ:s representing modem IRQ:s can be allocated
- */
-#define IRQ_MODEM_EVENTS_BASE	IRQ_SOC_START
-#define IRQ_MODEM_EVENTS_NBR	72
-#define IRQ_MODEM_EVENTS_END	(IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
-
-/* List of virtual IRQ:s that are allocated from the range above */
-#define MBOX_PAIR0_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 43)
-#define MBOX_PAIR1_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 45)
-#define MBOX_PAIR2_VIRT_IRQ	(IRQ_MODEM_EVENTS_BASE + 41)
-
-/*
- * We may have several SoCs, but only one will run at a
- * time, so the one with most IRQs will bump this ahead,
- * but the IRQ_SOC_START remains the same for either SoC.
- */
-#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END
-#undef IRQ_SOC_END
-#define IRQ_SOC_END		IRQ_MODEM_EVENTS_END
-#endif
-
-#endif /* CONFIG_UX500_SOC_DB5500 */
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 7da9ec5..e892854 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -36,7 +36,6 @@
 /* This will be overridden by SoC-specific irq headers */
 #define IRQ_SOC_END		IRQ_SOC_START
 
-#include <mach/irqs-db5500.h>
 #include <mach/irqs-db8500.h>
 
 #define IRQ_BOARD_START		IRQ_SOC_END
@@ -47,10 +46,6 @@
 #include <mach/irqs-board-mop500.h>
 #endif
 
-#ifdef CONFIG_MACH_U5500
-#include <mach/irqs-board-u5500.h>
-#endif
-
 #define NR_IRQS			IRQ_BOARD_END
 
 #endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/mbox-db5500.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h
deleted file mode 100644
index 7f9da4d..0000000
--- a/arch/arm/mach-ux500/include/mach/mbox-db5500.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
- * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __INC_STE_MBOX_H
-#define __INC_STE_MBOX_H
-
-#define MBOX_BUF_SIZE 16
-#define MBOX_NAME_SIZE 8
-
-/**
-  * mbox_recv_cb_t - Definition of the mailbox callback.
-  * @mbox_msg:	The mailbox message.
-  * @priv:	The clients private data as specified in the call to mbox_setup.
-  *
-  * This function will be called upon reception of new mailbox messages.
-  */
-typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv);
-
-/**
-  * struct mbox - Mailbox instance struct
-  * @list:		Linked list head.
-  * @pdev:		Pointer to device struct.
-  * @cb:		Callback function. Will be called
-  *			when new data is received.
-  * @client_data:	Clients private data. Will be sent back
-  *			in the callback function.
-  * @virtbase_peer:	Virtual address for outgoing mailbox.
-  * @virtbase_local:	Virtual address for incoming mailbox.
-  * @buffer:		Then internal queue for outgoing messages.
-  * @name:		Name of this mailbox.
-  * @buffer_available:	Completion variable to achieve "blocking send".
-  *			This variable will be signaled when there is
-  *			internal buffer space available.
-  * @client_blocked:	To keep track if any client is currently
-  *			blocked.
-  * @lock:		Spinlock to protect this mailbox instance.
-  * @write_index:	Index in internal buffer to write to.
-  * @read_index:	Index in internal buffer to read from.
-  * @allocated:		Indicates whether this particular mailbox
-  *			id has been allocated by someone.
-  */
-struct mbox {
-	struct list_head list;
-	struct platform_device *pdev;
-	mbox_recv_cb_t *cb;
-	void *client_data;
-	void __iomem *virtbase_peer;
-	void __iomem *virtbase_local;
-	u32 buffer[MBOX_BUF_SIZE];
-	char name[MBOX_NAME_SIZE];
-	struct completion buffer_available;
-	u8 client_blocked;
-	spinlock_t lock;
-	u8 write_index;
-	u8 read_index;
-	bool allocated;
-};
-
-/**
-  * mbox_setup - Set up a mailbox and return its instance.
-  * @mbox_id:	The ID number of the mailbox. 0 or 1 for modem CPU,
-  *		2 for modem DSP.
-  * @mbox_cb:	Pointer to the callback function to be called when a new message
-  *		is received.
-  * @priv:	Client user data which will be returned in the callback.
-  *
-  * Returns a mailbox instance to be specified in subsequent calls to mbox_send.
-  */
-struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv);
-
-/**
-  * mbox_send - Send a mailbox message.
-  * @mbox:	Mailbox instance (returned by mbox_setup)
-  * @mbox_msg:	The mailbox message to send.
-  * @block:	Specifies whether this call will block until send is possible,
-  *		or return an error if the mailbox buffer is full.
-  *
-  * Returns 0 on success or a negative error code on error. -ENOMEM indicates
-  * that the internal buffer is full and you have to try again later (or
-  * specify "block" in order to block until send is possible).
-  */
-int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block);
-
-#endif /*INC_STE_MBOX_H*/
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 3dc00ff..4e369f1 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -15,18 +15,12 @@
 #include <linux/init.h>
 
 void __init ux500_map_io(void);
-extern void __init u5500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern struct device * __init u5500_init_devices(void);
 extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
 
-extern void __init u5500_sdi_init(struct device *parent);
-
-extern void __init db5500_dma_init(struct device *parent);
-
 extern struct device *ux500_soc_device_init(const char *soc_id);
 
 struct amba_device;
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 6fb3c4b..34775ba 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -50,11 +50,8 @@ static void flush(void)
 
 static inline void arch_decomp_setup(void)
 {
-	/* Check in run time if we run on an U8500 or U5500 */
-	if (machine_is_u5500())
-		ux500_uart_base = U5500_UART0_BASE;
-	else
-		ux500_uart_base = U8500_UART2_BASE;
+	/* Use machine_is_foo() macro if you need to switch base someday */
+	ux500_uart_base = U8500_UART2_BASE;
 }
 
 #define arch_decomp_wdog() /* nothing to do here */