Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc general cleanups from Olof Johansson:
 "This is a large branch that contains a handful of different cleanups:

   - Fixing up the I/O space remapping on PCI on ARM.  This is a series
     from Rob Herring that restructures how all pci devices allocate I/O
     space, and it's part of the work to allow multiplatform kernels.
   - A number of cleanup series for OMAP, moving and removing some
     headers, sparse irq rework and in general preparation for
     multiplatform.
   - Final removal of all non-DT boards for Tegra, it is now
     device-tree-only!
   - Removal of a stale platform, nxp4008.  It's an old mobile chipset
     that is no longer in use, and was very likely never really used
     with a mainline kernel.  We have not been able to find anyone
     interested in keeping it around in the kernel.
   - Removal of the legacy dmaengine driver on tegra

  + A handful of other things that I haven't described above."

Fix up some conflicts with the staging tree (and because nxp4008 was
removed)

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits)
  ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6
  ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus
  ARM: mmp: using for_each_set_bit to simplify the code
  ARM: tegra: harmony: fix ldo7 regulator-name
  ARM: OMAP2+: Make omap4-keypad.h local
  ARM: OMAP2+: Make l4_3xxx.h local
  ARM: OMAP2+: Make l4_2xxx.h local
  ARM: OMAP2+: Make l3_3xxx.h local
  ARM: OMAP2+: Make l3_2xxx.h local
  ARM: OMAP1: Move irda.h from plat to mach
  ARM: OMAP2+: Make hdq1w.h local
  ARM: OMAP2+: Make gpmc-smsc911x.h local
  ARM: OMAP2+: Make gpmc-smc91x.h local
  ARM: OMAP1: Move flash.h from plat to mach
  ARM: OMAP2+: Make debug-devices.h local
  ARM: OMAP1: Move board-voiceblue.h from plat to mach
  ARM: OMAP1: Move board-sx1.h from plat to mach
  ARM: OMAP2+: Make omap-wakeupgen.h local
  ARM: OMAP2+: Make omap-secure.h local
  ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
  ...

8 files changed, 5 insertions, 339 deletions

diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 6ac7200..149237e 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
+obj-y := time.o devices.o cpu.o system.o irq-common.o
 
 obj-$(CONFIG_MXC_TZIC) += tzic.o
 obj-$(CONFIG_MXC_AVIC) += avic.o
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
deleted file mode 100644
index 5079787..0000000
--- a/arch/arm/plat-mxc/clock.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * Based on arch/arm/plat-omap/clock.c
- *
- * Copyright (C) 2004 - 2005 Nokia corporation
- * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-/* #define DEBUG */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-#include <linux/proc_fs.h>
-#include <linux/semaphore.h>
-#include <linux/string.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-
-#ifndef CONFIG_COMMON_CLK
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*-------------------------------------------------------------------------
- * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
-
-static void __clk_disable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-	WARN_ON(!clk->usecount);
-
-	if (!(--clk->usecount)) {
-		if (clk->disable)
-			clk->disable(clk);
-		__clk_disable(clk->parent);
-		__clk_disable(clk->secondary);
-	}
-}
-
-static int __clk_enable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	if (clk->usecount++ == 0) {
-		__clk_enable(clk->parent);
-		__clk_enable(clk->secondary);
-
-		if (clk->enable)
-			clk->enable(clk);
-	}
-	return 0;
-}
-
-/* This function increments the reference count on the clock and enables the
- * clock if not already enabled. The parent clock tree is recursively enabled
- */
-int clk_enable(struct clk *clk)
-{
-	int ret = 0;
-
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	ret = __clk_enable(clk);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_enable);
-
-/* This function decrements the reference count on the clock and disables
- * the clock when reference count is 0. The parent clock tree is
- * recursively disabled
- */
-void clk_disable(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	__clk_disable(clk);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_disable);
-
-/* Retrieve the *current* clock rate. If the clock itself
- * does not provide a special calculation routine, ask
- * its parent and so on, until one is able to return
- * a valid clock rate
- */
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return 0UL;
-
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-
-	return clk_get_rate(clk->parent);
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/* Round the requested clock rate to the nearest supported
- * rate that is less than or equal to the requested rate.
- * This is dependent on the clock's current parent.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
-		return 0;
-
-	return clk->round_rate(clk, rate);
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-/* Set the clock to the requested clock rate. The rate must
- * match a supported rate exactly based on what clk_round_rate returns
- */
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EINVAL;
-
-	if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
-		return ret;
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_rate(clk, rate);
-	mutex_unlock(&clocks_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/* Set the clock's parent to another clock source */
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
-	int ret = -EINVAL;
-	struct clk *old;
-
-	if (clk == NULL || IS_ERR(clk) || parent == NULL ||
-	    IS_ERR(parent) || clk->set_parent == NULL)
-		return ret;
-
-	if (clk->usecount)
-		clk_enable(parent);
-
-	mutex_lock(&clocks_mutex);
-	ret = clk->set_parent(clk, parent);
-	if (ret == 0) {
-		old = clk->parent;
-		clk->parent = parent;
-	} else {
-		old = parent;
-	}
-	mutex_unlock(&clocks_mutex);
-
-	if (clk->usecount)
-		clk_disable(old);
-
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* Retrieve the clock's parent clock source */
-struct clk *clk_get_parent(struct clk *clk)
-{
-	struct clk *ret = NULL;
-
-	if (clk == NULL || IS_ERR(clk))
-		return ret;
-
-	return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-#else
-
-/*
- * Lock to protect the clock module (ccm) registers. Used
- * on all i.MXs
- */
-DEFINE_SPINLOCK(imx_ccm_lock);
-
-#endif /* CONFIG_COMMON_CLK */
-
-/*
- * Get the resulting clock rate from a PLL register value and the input
- * frequency. PLLs with this register layout can at least be found on
- * MX1, MX21, MX27 and MX31
- *
- *                  mfi + mfn / (mfd + 1)
- *  f = 2 * f_ref * --------------------
- *                        pd + 1
- */
-unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
-{
-	long long ll;
-	int mfn_abs;
-	unsigned int mfi, mfn, mfd, pd;
-
-	mfi = (reg_val >> 10) & 0xf;
-	mfn = reg_val & 0x3ff;
-	mfd = (reg_val >> 16) & 0x3ff;
-	pd =  (reg_val >> 26) & 0xf;
-
-	mfi = mfi <= 5 ? 5 : mfi;
-
-	mfn_abs = mfn;
-
-	/* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
-	 * 2's complements number
-	 */
-	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
-		mfn_abs = 0x400 - mfn;
-
-	freq *= 2;
-	freq /= pd + 1;
-
-	ll = (unsigned long long)freq * mfn_abs;
-
-	do_div(ll, mfd + 1);
-
-	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
-		ll = -ll;
-
-	ll = (freq * mfi) + ll;
-
-	return ll;
-}
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 73db34b..b5b6f80 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -23,7 +23,6 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <mach/hardware.h>
-#include <mach/clock.h>
 
 #define CLK32_FREQ	32768
 #define NANOSECOND	(1000 * 1000 * 1000)
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
index 2020d84..d390f00 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -87,7 +87,7 @@ const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX35
 const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
 #define imx35_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K)
+	imx_imx_uart_1irq_data_entry(MX35, _id, _hwid, SZ_16K)
 	imx35_imx_uart_data_entry(0, 1),
 	imx35_imx_uart_data_entry(1, 2),
 	imx35_imx_uart_data_entry(2, 3),
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
deleted file mode 100644
index bd940c7..0000000
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_CLOCK_H__
-#define __ASM_ARCH_MXC_CLOCK_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/list.h>
-
-#ifndef CONFIG_COMMON_CLK
-struct module;
-
-struct clk {
-	int id;
-	/* Source clock this clk depends on */
-	struct clk *parent;
-	/* Secondary clock to enable/disable with this clock */
-	struct clk *secondary;
-	/* Reference count of clock enable/disable */
-	__s8 usecount;
-	/* Register bit position for clock's enable/disable control. */
-	u8 enable_shift;
-	/* Register address for clock's enable/disable control. */
-	void __iomem *enable_reg;
-	u32 flags;
-	/* get the current clock rate (always a fresh value) */
-	unsigned long (*get_rate) (struct clk *);
-	/* Function ptr to set the clock to a new rate. The rate must match a
-	   supported rate returned from round_rate. Leave blank if clock is not
-	   programmable */
-	int (*set_rate) (struct clk *, unsigned long);
-	/* Function ptr to round the requested clock rate to the nearest
-	   supported rate that is less than or equal to the requested rate. */
-	unsigned long (*round_rate) (struct clk *, unsigned long);
-	/* Function ptr to enable the clock. Leave blank if clock can not
-	   be gated. */
-	int (*enable) (struct clk *);
-	/* Function ptr to disable the clock. Leave blank if clock can not
-	   be gated. */
-	void (*disable) (struct clk *);
-	/* Function ptr to set the parent clock of the clock. */
-	int (*set_parent) (struct clk *, struct clk *);
-};
-
-int clk_register(struct clk *clk);
-void clk_unregister(struct clk *clk);
-#endif /* CONFIG_COMMON_CLK */
-
-extern spinlock_t imx_ccm_lock;
-
-unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
index 3c080a3..7ded6f1 100644
--- a/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h
@@ -23,7 +23,6 @@
 #ifndef __MACH_MX2_CAM_H_
 #define __MACH_MX2_CAM_H_
 
-#define MX2_CAMERA_SWAP16		(1 << 0)
 #define MX2_CAMERA_EXT_VSYNC		(1 << 1)
 #define MX2_CAMERA_CCIR			(1 << 2)
 #define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
@@ -31,7 +30,6 @@
 #define MX2_CAMERA_GATED_CLOCK		(1 << 5)
 #define MX2_CAMERA_INV_DATA		(1 << 6)
 #define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
-#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
 
 /**
  * struct mx2_camera_platform_data - optional platform data for mx2_camera
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index dbced61..ee9b1f9 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -76,7 +76,7 @@
 #define MX31_RTIC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xec000)
 
 #define MX31_ROMP_BASE_ADDR		0x60000000
-#define MX31_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX31_ROMP_BASE_ADDR_VIRT	IOMEM(0xfc500000)
 #define MX31_ROMP_SIZE			SZ_1M
 
 #define MX31_AVIC_BASE_ADDR		0x68000000
@@ -92,11 +92,11 @@
 #define MX31_CS3_BASE_ADDR		0xb2000000
 
 #define MX31_CS4_BASE_ADDR		0xb4000000
-#define MX31_CS4_BASE_ADDR_VIRT		0xf6000000
+#define MX31_CS4_BASE_ADDR_VIRT		IOMEM(0xf6000000)
 #define MX31_CS4_SIZE			SZ_32M
 
 #define MX31_CS5_BASE_ADDR		0xb6000000
-#define MX31_CS5_BASE_ADDR_VIRT		0xf8000000
+#define MX31_CS5_BASE_ADDR_VIRT		IOMEM(0xf8000000)
 #define MX31_CS5_SIZE			SZ_32M
 
 #define MX31_X_MEMC_BASE_ADDR		0xb8000000
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 1996c3e..3da78cf 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -21,7 +21,6 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/delay.h>
-#include <linux/module.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -29,9 +28,6 @@
 #include <asm/proc-fns.h>
 #include <asm/mach-types.h>
 
-void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
-EXPORT_SYMBOL_GPL(imx_ioremap);
-
 static void __iomem *wdog_base;
 
 /*