ARM: pxa: move platform_data definitions

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the pxa include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Paul Parsons <lost.distance@yahoo.com>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Acked-By: Stefan Schmidt <stefan@openezx.org>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Daniel Ribeiro <drwyrm@gmail.com>
Cc: Harald Welte <laforge@openezx.org>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Tomas Cech <sleep_walker@suse.cz>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Dan Williams <djbw@fb.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: openezx-devel@lists.openezx.org

2 files changed, 0 insertions, 152 deletions

diff --git a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h b/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
deleted file mode 100644
index 5ce8d5e6..0000000
--- a/arch/arm/plat-pxa/include/plat/pxa27x_keypad.h
+++ /dev/null
@@ -1,73 +0,0 @@
-#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
-#define __ASM_ARCH_PXA27x_KEYPAD_H
-
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-
-#define MAX_MATRIX_KEY_ROWS	(8)
-#define MAX_MATRIX_KEY_COLS	(8)
-#define MATRIX_ROW_SHIFT	(3)
-#define MAX_DIRECT_KEY_NUM	(8)
-
-/* pxa3xx keypad platform specific parameters
- *
- * NOTE:
- * 1. direct_key_num indicates the number of keys in the direct keypad
- *    _plus_ the number of rotary-encoder sensor inputs,  this can be
- *    left as 0 if only rotary encoders are enabled,  the driver will
- *    automatically calculate this
- *
- * 2. direct_key_map is the key code map for the direct keys, if rotary
- *    encoder(s) are enabled, direct key 0/1(2/3) will be ignored
- *
- * 3. rotary can be either interpreted as a relative input event (e.g.
- *    REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
- *
- * 4. matrix key and direct key will use the same debounce_interval by
- *    default, which should be sufficient in most cases
- *
- * pxa168 keypad platform specific parameter
- *
- * NOTE:
- * clear_wakeup_event callback is a workaround required to clear the
- * keypad interrupt. The keypad wake must be cleared in addition to
- * reading the MI/DI bits in the KPC register.
- */
-struct pxa27x_keypad_platform_data {
-
-	/* code map for the matrix keys */
-	unsigned int	matrix_key_rows;
-	unsigned int	matrix_key_cols;
-	unsigned int	*matrix_key_map;
-	int		matrix_key_map_size;
-
-	/* direct keys */
-	int		direct_key_num;
-	unsigned int	direct_key_map[MAX_DIRECT_KEY_NUM];
-	/* the key output may be low active */
-	int		direct_key_low_active;
-	/* give board a chance to choose the start direct key */
-	unsigned int	direct_key_mask;
-
-	/* rotary encoders 0 */
-	int		enable_rotary0;
-	int		rotary0_rel_code;
-	int		rotary0_up_key;
-	int		rotary0_down_key;
-
-	/* rotary encoders 1 */
-	int		enable_rotary1;
-	int		rotary1_rel_code;
-	int		rotary1_up_key;
-	int		rotary1_down_key;
-
-	/* key debounce interval */
-	unsigned int	debounce_interval;
-
-	/* clear wakeup event requirement for pxa168 */
-	void		(*clear_wakeup_event)(void);
-};
-
-extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
-
-#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
deleted file mode 100644
index c42f39f..0000000
--- a/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
+++ /dev/null
@@ -1,79 +0,0 @@
-#ifndef __ASM_ARCH_PXA3XX_NAND_H
-#define __ASM_ARCH_PXA3XX_NAND_H
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-struct pxa3xx_nand_timing {
-	unsigned int	tCH;  /* Enable signal hold time */
-	unsigned int	tCS;  /* Enable signal setup time */
-	unsigned int	tWH;  /* ND_nWE high duration */
-	unsigned int	tWP;  /* ND_nWE pulse time */
-	unsigned int	tRH;  /* ND_nRE high duration */
-	unsigned int	tRP;  /* ND_nRE pulse width */
-	unsigned int	tR;   /* ND_nWE high to ND_nRE low for read */
-	unsigned int	tWHR; /* ND_nWE high to ND_nRE low for status read */
-	unsigned int	tAR;  /* ND_ALE low to ND_nRE low delay */
-};
-
-struct pxa3xx_nand_cmdset {
-	uint16_t	read1;
-	uint16_t	read2;
-	uint16_t	program;
-	uint16_t	read_status;
-	uint16_t	read_id;
-	uint16_t	erase;
-	uint16_t	reset;
-	uint16_t	lock;
-	uint16_t	unlock;
-	uint16_t	lock_status;
-};
-
-struct pxa3xx_nand_flash {
-	char		*name;
-	uint32_t	chip_id;
-	unsigned int	page_per_block; /* Pages per block (PG_PER_BLK) */
-	unsigned int	page_size;	/* Page size in bytes (PAGE_SZ) */
-	unsigned int	flash_width;	/* Width of Flash memory (DWIDTH_M) */
-	unsigned int	dfc_width;	/* Width of flash controller(DWIDTH_C) */
-	unsigned int	num_blocks;	/* Number of physical blocks in Flash */
-
-	struct pxa3xx_nand_timing *timing;	/* NAND Flash timing */
-};
-
-/*
- * Current pxa3xx_nand controller has two chip select which
- * both be workable.
- *
- * Notice should be taken that:
- * When you want to use this feature, you should not enable the
- * keep configuration feature, for two chip select could be
- * attached with different nand chip. The different page size
- * and timing requirement make the keep configuration impossible.
- */
-
-/* The max num of chip select current support */
-#define NUM_CHIP_SELECT		(2)
-struct pxa3xx_nand_platform_data {
-
-	/* the data flash bus is shared between the Static Memory
-	 * Controller and the Data Flash Controller,  the arbiter
-	 * controls the ownership of the bus
-	 */
-	int	enable_arbiter;
-
-	/* allow platform code to keep OBM/bootloader defined NFC config */
-	int	keep_config;
-
-	/* indicate how many chip selects will be used */
-	int	num_cs;
-
-	const struct mtd_partition		*parts[NUM_CHIP_SELECT];
-	unsigned int				nr_parts[NUM_CHIP_SELECT];
-
-	const struct pxa3xx_nand_flash * 	flash;
-	size_t					num_flash;
-};
-
-extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
-#endif /* __ASM_ARCH_PXA3XX_NAND_H */