Merge branch 'pinmux-dt' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel into next/dt

This branch enables device tree bindings for the CSR Prima pin control
subsystem. All patches acked by Linus W (pinctrl maintainer).

* 'pinmux-dt' of git://gitorious.org/sirfprima2-kernel/sirfprima2-kernel:
  pinctrl: sirf: add DT-binding pinmux mapping support
  ARM: PRIMA2: rename prima2-cb.dts to prima2.dtsi as it only has SoC features
  ARM: PRIMA2: add missing interrupts property for pinctrl node
  + sync to Linux 3.6-rc4

49 files changed, 840 insertions, 520 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6d6e18f..c5f9ae5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2144,6 +2144,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 59509c4..bd0cff3 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -154,5 +154,10 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
+
+		wdt2: wdt@44e35000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer2";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index cd86177..59d9789 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -25,8 +25,8 @@
 		aips@70000000 { /* aips-1 */
 			spba@70000000 {
 				esdhc@70004000 { /* ESDHC1 */
-					fsl,cd-internal;
-					fsl,wp-internal;
+					fsl,cd-controller;
+					fsl,wp-controller;
 					status = "okay";
 				};
 
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 52d9470..f8ca6fa 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -41,9 +41,13 @@
 		};
 		power-blue {
 			label = "power:blue";
-			gpios = <&gpio1 11 0>;
+			gpios = <&gpio1 10 0>;
 			linux,default-trigger = "timer";
 		};
+		power-red {
+			label = "power:red";
+			gpios = <&gpio1 11 0>;
+		};
 		usb1 {
 			label = "usb1:blue";
 			gpios = <&gpio1 12 0>;
diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts
deleted file mode 100644
index 34ae3a6..0000000
--- a/arch/arm/boot/dts/prima2-cb.dts
+++ /dev/null
@@ -1,424 +0,0 @@
-/dts-v1/;
-/ {
-	model = "SiRF Prima2 eVB";
-	compatible = "sirf,prima2-cb", "sirf,prima2";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	chosen {
-		bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1";
-		linux,stdout-path = &uart1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* from bootloader */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-		};
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0x80000000>;
-
-		l2-cache-controller@80040000 {
-			compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
-			reg = <0x80040000 0x1000>;
-			interrupts = <59>;
-			arm,tag-latency = <1 1 1>;
-			arm,data-latency = <1 1 1>;
-			arm,filter-ranges = <0 0x40000000>;
-		};
-
-		intc: interrupt-controller@80020000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "sirf,prima2-intc";
-			reg = <0x80020000 0x1000>;
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x88000000 0x88000000 0x40000>;
-
-			clock-controller@88000000 {
-				compatible = "sirf,prima2-clkc";
-				reg = <0x88000000 0x1000>;
-				interrupts = <3>;
-			};
-
-			reset-controller@88010000 {
-				compatible = "sirf,prima2-rstc";
-				reg = <0x88010000 0x1000>;
-			};
-
-			rsc-controller@88020000 {
-				compatible = "sirf,prima2-rsc";
-				reg = <0x88020000 0x1000>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90000000 0x90000000 0x10000>;
-
-			memory-controller@90000000 {
-				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x10000>;
-				interrupts = <27>;
-			};
-		};
-
-		disp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90010000 0x90010000 0x30000>;
-
-			display@90010000 {
-				compatible = "sirf,prima2-lcd";
-				reg = <0x90010000 0x20000>;
-				interrupts = <30>;
-			};
-
-			vpp@90020000 {
-				compatible = "sirf,prima2-vpp";
-				reg = <0x90020000 0x10000>;
-				interrupts = <31>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x98000000 0x98000000 0x8000000>;
-
-			graphics@98000000 {
-				compatible = "powervr,sgx531";
-				reg = <0x98000000 0x8000000>;
-				interrupts = <6>;
-			};
-		};
-
-		multimedia-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa0000000 0xa0000000 0x8000000>;
-
-			multimedia@a0000000 {
-				compatible = "sirf,prima2-video-codec";
-				reg = <0xa0000000 0x8000000>;
-				interrupts = <5>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa8000000 0xa8000000 0x2000000>;
-
-			dspif@a8000000 {
-				compatible = "sirf,prima2-dspif";
-				reg = <0xa8000000 0x10000>;
-				interrupts = <9>;
-			};
-
-			gps@a8010000 {
-				compatible = "sirf,prima2-gps";
-				reg = <0xa8010000 0x10000>;
-				interrupts = <7>;
-			};
-
-			dsp@a9000000 {
-				compatible = "sirf,prima2-dsp";
-				reg = <0xa9000000 0x1000000>;
-				interrupts = <8>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>;
-
-			timer@b0020000 {
-				compatible = "sirf,prima2-tick";
-				reg = <0xb0020000 0x1000>;
-				interrupts = <0>;
-			};
-
-			nand@b0030000 {
-				compatible = "sirf,prima2-nand";
-				reg = <0xb0030000 0x10000>;
-				interrupts = <41>;
-			};
-
-			audio@b0040000 {
-				compatible = "sirf,prima2-audio";
-				reg = <0xb0040000 0x10000>;
-				interrupts = <35>;
-			};
-
-			uart0: uart@b0050000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x10000>;
-				interrupts = <17>;
-			};
-
-			uart1: uart@b0060000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x10000>;
-				interrupts = <18>;
-			};
-
-			uart2: uart@b0070000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x10000>;
-				interrupts = <19>;
-			};
-
-			usp0: usp@b0080000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0080000 0x10000>;
-				interrupts = <20>;
-			};
-
-			usp1: usp@b0090000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0090000 0x10000>;
-				interrupts = <21>;
-			};
-
-			usp2: usp@b00a0000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb00a0000 0x10000>;
-				interrupts = <22>;
-			};
-
-			dmac0: dma-controller@b00b0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb00b0000 0x10000>;
-				interrupts = <12>;
-			};
-
-			dmac1: dma-controller@b0160000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb0160000 0x10000>;
-				interrupts = <13>;
-			};
-
-			vip@b00C0000 {
-				compatible = "sirf,prima2-vip";
-				reg = <0xb00C0000 0x10000>;
-			};
-
-			spi0: spi@b00d0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb00d0000 0x10000>;
-				interrupts = <15>;
-			};
-
-			spi1: spi@b0170000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb0170000 0x10000>;
-				interrupts = <16>;
-			};
-
-			i2c0: i2c@b00e0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00e0000 0x10000>;
-				interrupts = <24>;
-			};
-
-			i2c1: i2c@b00f0000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00f0000 0x10000>;
-				interrupts = <25>;
-			};
-
-			tsc@b0110000 {
-				compatible = "sirf,prima2-tsc";
-				reg = <0xb0110000 0x10000>;
-				interrupts = <33>;
-			};
-
-			gpio: gpio-controller@b0120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,prima2-gpio-pinmux";
-				reg = <0xb0120000 0x10000>;
-				gpio-controller;
-				interrupt-controller;
-			};
-
-			pwm@b0130000 {
-				compatible = "sirf,prima2-pwm";
-				reg = <0xb0130000 0x10000>;
-			};
-
-			efusesys@b0140000 {
-				compatible = "sirf,prima2-efuse";
-				reg = <0xb0140000 0x10000>;
-			};
-
-			pulsec@b0150000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0xb0150000 0x10000>;
-				interrupts = <48>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,prima2-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x56000000 0x56000000 0x1b00000>;
-
-				sd0: sdhci@56000000 {
-					cell-index = <0>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56000000 0x100000>;
-					interrupts = <38>;
-				};
-
-				sd1: sdhci@56100000 {
-					cell-index = <1>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56100000 0x100000>;
-					interrupts = <38>;
-				};
-
-				sd2: sdhci@56200000 {
-					cell-index = <2>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56200000 0x100000>;
-					interrupts = <23>;
-				};
-
-				sd3: sdhci@56300000 {
-					cell-index = <3>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56300000 0x100000>;
-					interrupts = <23>;
-				};
-
-				sd4: sdhci@56400000 {
-					cell-index = <4>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56400000 0x100000>;
-					interrupts = <39>;
-				};
-
-				sd5: sdhci@56500000 {
-					cell-index = <5>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56500000 0x100000>;
-					interrupts = <39>;
-				};
-
-				pci-copy@57900000 {
-					compatible = "sirf,prima2-pcicp";
-					reg = <0x57900000 0x100000>;
-					interrupts = <40>;
-				};
-
-				rom-interface@57a00000 {
-					compatible = "sirf,prima2-romif";
-					reg = <0x57a00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80030000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,prima2-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <55 56 57>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,prima2-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <52 53 54>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,prima2-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb8000000 0xb8000000 0x40000>;
-
-			usb0: usb@b00e0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8000000 0x10000>;
-				interrupts = <10>;
-			};
-
-			usb1: usb@b00f0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8010000 0x10000>;
-				interrupts = <11>;
-			};
-
-			sata@b00f0000 {
-				compatible = "synopsys,dwc-ahsata";
-				reg = <0xb8020000 0x10000>;
-				interrupts = <37>;
-			};
-
-			security@b00f0000 {
-				compatible = "sirf,prima2-security";
-				reg = <0xb8030000 0x10000>;
-				interrupts = <42>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/prima2-evb.dts b/arch/arm/boot/dts/prima2-evb.dts
new file mode 100644
index 0000000..57286b4
--- /dev/null
+++ b/arch/arm/boot/dts/prima2-evb.dts
@@ -0,0 +1,37 @@
+/*
+ * DTS file for CSR SiRFprimaII Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "prima2.dtsi"
+
+/ {
+	model = "CSR SiRFprimaII Evaluation Board";
+	compatible = "sirf,prima2", "sirf,prima2-cb";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	axi {
+		peri-iobg {
+			uart@b0060000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins_a>;
+			};
+			spi@b00d0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi0_pins_a>;
+			};
+			spi@b0170000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins_a>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
new file mode 100644
index 0000000..055fca5
--- /dev/null
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -0,0 +1,640 @@
+/*
+ * DTS file for CSR SiRFprimaII SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+	compatible = "sirf,prima2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* from bootloader */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x80000000>;
+
+		l2-cache-controller@80040000 {
+			compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache";
+			reg = <0x80040000 0x1000>;
+			interrupts = <59>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <1 1 1>;
+			arm,filter-ranges = <0 0x40000000>;
+		};
+
+		intc: interrupt-controller@80020000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "sirf,prima2-intc";
+			reg = <0x80020000 0x1000>;
+		};
+
+		sys-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x88000000 0x88000000 0x40000>;
+
+			clock-controller@88000000 {
+				compatible = "sirf,prima2-clkc";
+				reg = <0x88000000 0x1000>;
+				interrupts = <3>;
+			};
+
+			reset-controller@88010000 {
+				compatible = "sirf,prima2-rstc";
+				reg = <0x88010000 0x1000>;
+			};
+
+			rsc-controller@88020000 {
+				compatible = "sirf,prima2-rsc";
+				reg = <0x88020000 0x1000>;
+			};
+		};
+
+		mem-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90000000 0x90000000 0x10000>;
+
+			memory-controller@90000000 {
+				compatible = "sirf,prima2-memc";
+				reg = <0x90000000 0x10000>;
+				interrupts = <27>;
+			};
+		};
+
+		disp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x90010000 0x90010000 0x30000>;
+
+			display@90010000 {
+				compatible = "sirf,prima2-lcd";
+				reg = <0x90010000 0x20000>;
+				interrupts = <30>;
+			};
+
+			vpp@90020000 {
+				compatible = "sirf,prima2-vpp";
+				reg = <0x90020000 0x10000>;
+				interrupts = <31>;
+			};
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x98000000 0x98000000 0x8000000>;
+
+			graphics@98000000 {
+				compatible = "powervr,sgx531";
+				reg = <0x98000000 0x8000000>;
+				interrupts = <6>;
+			};
+		};
+
+		multimedia-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa0000000 0xa0000000 0x8000000>;
+
+			multimedia@a0000000 {
+				compatible = "sirf,prima2-video-codec";
+				reg = <0xa0000000 0x8000000>;
+				interrupts = <5>;
+			};
+		};
+
+		dsp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xa8000000 0xa8000000 0x2000000>;
+
+			dspif@a8000000 {
+				compatible = "sirf,prima2-dspif";
+				reg = <0xa8000000 0x10000>;
+				interrupts = <9>;
+			};
+
+			gps@a8010000 {
+				compatible = "sirf,prima2-gps";
+				reg = <0xa8010000 0x10000>;
+				interrupts = <7>;
+			};
+
+			dsp@a9000000 {
+				compatible = "sirf,prima2-dsp";
+				reg = <0xa9000000 0x1000000>;
+				interrupts = <8>;
+			};
+		};
+
+		peri-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0xb0000000 0x180000>;
+
+			timer@b0020000 {
+				compatible = "sirf,prima2-tick";
+				reg = <0xb0020000 0x1000>;
+				interrupts = <0>;
+			};
+
+			nand@b0030000 {
+				compatible = "sirf,prima2-nand";
+				reg = <0xb0030000 0x10000>;
+				interrupts = <41>;
+			};
+
+			audio@b0040000 {
+				compatible = "sirf,prima2-audio";
+				reg = <0xb0040000 0x10000>;
+				interrupts = <35>;
+			};
+
+			uart0: uart@b0050000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0050000 0x10000>;
+				interrupts = <17>;
+			};
+
+			uart1: uart@b0060000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0060000 0x10000>;
+				interrupts = <18>;
+			};
+
+			uart2: uart@b0070000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-uart";
+				reg = <0xb0070000 0x10000>;
+				interrupts = <19>;
+			};
+
+			usp0: usp@b0080000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0080000 0x10000>;
+				interrupts = <20>;
+			};
+
+			usp1: usp@b0090000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb0090000 0x10000>;
+				interrupts = <21>;
+			};
+
+			usp2: usp@b00a0000 {
+				cell-index = <2>;
+				compatible = "sirf,prima2-usp";
+				reg = <0xb00a0000 0x10000>;
+				interrupts = <22>;
+			};
+
+			dmac0: dma-controller@b00b0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb00b0000 0x10000>;
+				interrupts = <12>;
+			};
+
+			dmac1: dma-controller@b0160000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-dmac";
+				reg = <0xb0160000 0x10000>;
+				interrupts = <13>;
+			};
+
+			vip@b00C0000 {
+				compatible = "sirf,prima2-vip";
+				reg = <0xb00C0000 0x10000>;
+			};
+
+			spi0: spi@b00d0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb00d0000 0x10000>;
+				interrupts = <15>;
+			};
+
+			spi1: spi@b0170000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-spi";
+				reg = <0xb0170000 0x10000>;
+				interrupts = <16>;
+			};
+
+			i2c0: i2c@b00e0000 {
+				cell-index = <0>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00e0000 0x10000>;
+				interrupts = <24>;
+			};
+
+			i2c1: i2c@b00f0000 {
+				cell-index = <1>;
+				compatible = "sirf,prima2-i2c";
+				reg = <0xb00f0000 0x10000>;
+				interrupts = <25>;
+			};
+
+			tsc@b0110000 {
+				compatible = "sirf,prima2-tsc";
+				reg = <0xb0110000 0x10000>;
+				interrupts = <33>;
+			};
+
+			gpio: pinctrl@b0120000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,prima2-pinctrl";
+				reg = <0xb0120000 0x10000>;
+				interrupts = <43 44 45 46 47>;
+				gpio-controller;
+				interrupt-controller;
+
+				lcd_16pins_a: lcd0@0 {
+					lcd {
+						sirf,pins = "lcd_16bitsgrp";
+						sirf,function = "lcd_16bits";
+					};
+				};
+				lcd_18pins_a: lcd0@1 {
+					lcd {
+						sirf,pins = "lcd_18bitsgrp";
+						sirf,function = "lcd_18bits";
+					};
+				};
+				lcd_24pins_a: lcd0@2 {
+					lcd {
+						sirf,pins = "lcd_24bitsgrp";
+						sirf,function = "lcd_24bits";
+					};
+				};
+				lcdrom_pins_a: lcdrom0@0 {
+					lcd {
+						sirf,pins = "lcdromgrp";
+						sirf,function = "lcdrom";
+					};
+				};
+				uart0_pins_a: uart0@0 {
+					uart {
+						sirf,pins = "uart0grp";
+						sirf,function = "uart0";
+					};
+				};
+				uart1_pins_a: uart1@0 {
+					uart {
+						sirf,pins = "uart1grp";
+						sirf,function = "uart1";
+					};
+				};
+				uart2_pins_a: uart2@0 {
+					uart {
+						sirf,pins = "uart2grp";
+						sirf,function = "uart2";
+					};
+				};
+				uart2_noflow_pins_a: uart2@1 {
+					uart {
+						sirf,pins = "uart2_nostreamctrlgrp";
+						sirf,function = "uart2_nostreamctrl";
+					};
+				};
+				spi0_pins_a: spi0@0 {
+					spi {
+						sirf,pins = "spi0grp";
+						sirf,function = "spi0";
+					};
+				};
+				spi1_pins_a: spi1@0 {
+					spi {
+						sirf,pins = "spi1grp";
+						sirf,function = "spi1";
+					};
+				};
+				i2c0_pins_a: i2c0@0 {
+					i2c {
+						sirf,pins = "i2c0grp";
+						sirf,function = "i2c0";
+					};
+				};
+				i2c1_pins_a: i2c1@0 {
+					i2c {
+						sirf,pins = "i2c1grp";
+						sirf,function = "i2c1";
+					};
+				};
+                                pwm0_pins_a: pwm0@0 {
+                                        pwm {
+                                                sirf,pins = "pwm0grp";
+                                                sirf,function = "pwm0";
+                                        };
+                                };
+                                pwm1_pins_a: pwm1@0 {
+                                        pwm {
+                                                sirf,pins = "pwm1grp";
+                                                sirf,function = "pwm1";
+                                        };
+                                };
+                                pwm2_pins_a: pwm2@0 {
+                                        pwm {
+                                                sirf,pins = "pwm2grp";
+                                                sirf,function = "pwm2";
+                                        };
+                                };
+                                pwm3_pins_a: pwm3@0 {
+                                        pwm {
+                                                sirf,pins = "pwm3grp";
+                                                sirf,function = "pwm3";
+                                        };
+                                };
+                                gps_pins_a: gps@0 {
+                                        gps {
+                                                sirf,pins = "gpsgrp";
+                                                sirf,function = "gps";
+                                        };
+                                };
+                                vip_pins_a: vip@0 {
+                                        vip {
+                                                sirf,pins = "vipgrp";
+                                                sirf,function = "vip";
+                                        };
+                                };
+                                sdmmc0_pins_a: sdmmc0@0 {
+                                        sdmmc0 {
+                                                sirf,pins = "sdmmc0grp";
+                                                sirf,function = "sdmmc0";
+                                        };
+                                };
+                                sdmmc1_pins_a: sdmmc1@0 {
+                                        sdmmc1 {
+                                                sirf,pins = "sdmmc1grp";
+                                                sirf,function = "sdmmc1";
+                                        };
+                                };
+                                sdmmc2_pins_a: sdmmc2@0 {
+                                        sdmmc2 {
+                                                sirf,pins = "sdmmc2grp";
+                                                sirf,function = "sdmmc2";
+                                        };
+                                };
+                                sdmmc3_pins_a: sdmmc3@0 {
+                                        sdmmc3 {
+                                                sirf,pins = "sdmmc3grp";
+                                                sirf,function = "sdmmc3";
+                                        };
+                                };
+                                sdmmc4_pins_a: sdmmc4@0 {
+                                        sdmmc4 {
+                                                sirf,pins = "sdmmc4grp";
+                                                sirf,function = "sdmmc4";
+                                        };
+                                };
+                                sdmmc5_pins_a: sdmmc5@0 {
+                                        sdmmc5 {
+                                                sirf,pins = "sdmmc5grp";
+                                                sirf,function = "sdmmc5";
+                                        };
+                                };
+                                i2s_pins_a: i2s@0 {
+                                        i2s {
+                                                sirf,pins = "i2sgrp";
+                                                sirf,function = "i2s";
+                                        };
+                                };
+                                ac97_pins_a: ac97@0 {
+                                        ac97 {
+                                                sirf,pins = "ac97grp";
+                                                sirf,function = "ac97";
+                                        };
+                                };
+                                nand_pins_a: nand@0 {
+                                        nand {
+                                                sirf,pins = "nandgrp";
+                                                sirf,function = "nand";
+                                        };
+                                };
+                                usp0_pins_a: usp0@0 {
+                                        usp0 {
+                                                sirf,pins = "usp0grp";
+                                                sirf,function = "usp0";
+                                        };
+                                };
+                                usp1_pins_a: usp1@0 {
+                                        usp1 {
+                                                sirf,pins = "usp1grp";
+                                                sirf,function = "usp1";
+                                        };
+                                };
+                                usp2_pins_a: usp2@0 {
+                                        usp2 {
+                                                sirf,pins = "usp2grp";
+                                                sirf,function = "usp2";
+                                        };
+                                };
+                                usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
+                                        usb0_utmi_drvbus {
+                                                sirf,pins = "usb0_utmi_drvbusgrp";
+                                                sirf,function = "usb0_utmi_drvbus";
+                                        };
+                                };
+                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
+                                        usb1_utmi_drvbus {
+                                                sirf,pins = "usb1_utmi_drvbusgrp";
+                                                sirf,function = "usb1_utmi_drvbus";
+                                        };
+                                };
+                                warm_rst_pins_a: warm_rst@0 {
+                                        warm_rst {
+                                                sirf,pins = "warm_rstgrp";
+                                                sirf,function = "warm_rst";
+                                        };
+                                };
+                                pulse_count_pins_a: pulse_count@0 {
+                                        pulse_count {
+                                                sirf,pins = "pulse_countgrp";
+                                                sirf,function = "pulse_count";
+                                        };
+                                };
+                                cko0_rst_pins_a: cko0_rst@0 {
+                                        cko0_rst {
+                                                sirf,pins = "cko0_rstgrp";
+                                                sirf,function = "cko0_rst";
+                                        };
+                                };
+                                cko1_rst_pins_a: cko1_rst@0 {
+                                        cko1_rst {
+                                                sirf,pins = "cko1_rstgrp";
+                                                sirf,function = "cko1_rst";
+                                        };
+                                };
+			};
+
+			pwm@b0130000 {
+				compatible = "sirf,prima2-pwm";
+				reg = <0xb0130000 0x10000>;
+			};
+
+			efusesys@b0140000 {
+				compatible = "sirf,prima2-efuse";
+				reg = <0xb0140000 0x10000>;
+			};
+
+			pulsec@b0150000 {
+				compatible = "sirf,prima2-pulsec";
+				reg = <0xb0150000 0x10000>;
+				interrupts = <48>;
+			};
+
+			pci-iobg {
+				compatible = "sirf,prima2-pciiobg", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x56000000 0x56000000 0x1b00000>;
+
+				sd0: sdhci@56000000 {
+					cell-index = <0>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56000000 0x100000>;
+					interrupts = <38>;
+				};
+
+				sd1: sdhci@56100000 {
+					cell-index = <1>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56100000 0x100000>;
+					interrupts = <38>;
+				};
+
+				sd2: sdhci@56200000 {
+					cell-index = <2>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56200000 0x100000>;
+					interrupts = <23>;
+				};
+
+				sd3: sdhci@56300000 {
+					cell-index = <3>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56300000 0x100000>;
+					interrupts = <23>;
+				};
+
+				sd4: sdhci@56400000 {
+					cell-index = <4>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56400000 0x100000>;
+					interrupts = <39>;
+				};
+
+				sd5: sdhci@56500000 {
+					cell-index = <5>;
+					compatible = "sirf,prima2-sdhc";
+					reg = <0x56500000 0x100000>;
+					interrupts = <39>;
+				};
+
+				pci-copy@57900000 {
+					compatible = "sirf,prima2-pcicp";
+					reg = <0x57900000 0x100000>;
+					interrupts = <40>;
+				};
+
+				rom-interface@57a00000 {
+					compatible = "sirf,prima2-romif";
+					reg = <0x57a00000 0x100000>;
+				};
+			};
+		};
+
+		rtc-iobg {
+			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80030000 0x10000>;
+
+			gpsrtc@1000 {
+				compatible = "sirf,prima2-gpsrtc";
+				reg = <0x1000 0x1000>;
+				interrupts = <55 56 57>;
+			};
+
+			sysrtc@2000 {
+				compatible = "sirf,prima2-sysrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <52 53 54>;
+			};
+
+			pwrc@3000 {
+				compatible = "sirf,prima2-pwrc";
+				reg = <0x3000 0x1000>;
+				interrupts = <32>;
+			};
+		};
+
+		uus-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb8000000 0xb8000000 0x40000>;
+
+			usb0: usb@b00e0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8000000 0x10000>;
+				interrupts = <10>;
+			};
+
+			usb1: usb@b00f0000 {
+				compatible = "chipidea,ci13611a-prima2";
+				reg = <0xb8010000 0x10000>;
+				interrupts = <11>;
+			};
+
+			sata@b00f0000 {
+				compatible = "synopsys,dwc-ahsata";
+				reg = <0xb8020000 0x10000>;
+				interrupts = <37>;
+			};
+
+			security@b00f0000 {
+				compatible = "sirf,prima2-security";
+				reg = <0xb8030000 0x10000>;
+				interrupts = <42>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 3b2f351..d351b27 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -66,6 +66,7 @@
 
 	vcxio: regulator@8 {
 		compatible = "ti,twl6030-vcxio";
+		regulator-always-on;
 	};
 
 	vusb: regulator@9 {
@@ -74,10 +75,12 @@
 
 	v1v8: regulator@10 {
 		compatible = "ti,twl6030-v1v8";
+		regulator-always-on;
 	};
 
 	v2v1: regulator@11 {
 		compatible = "ti,twl6030-v2v1";
+		regulator-always-on;
 	};
 
 	clk32kg: regulator@12 {
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 2d4f661..da68454 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index db399df..e5a97d9 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -102,7 +102,8 @@ void __init dove_ehci1_init(void)
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE,
-			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR);
+			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR,
+			1600);
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 5ca8030..4e574c2 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -42,6 +42,7 @@
 #include <plat/backlight.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
+#include <plat/hdmi.h>
 
 #include <mach/ohci.h>
 #include <mach/map.h>
@@ -734,6 +735,11 @@ static void __init origen_bt_setup(void)
 	s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
 }
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* Direct HPD to HDMI chip */
@@ -781,6 +787,7 @@ static void __init origen_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 #ifdef CONFIG_DRM_EXYNOS
 	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 3cfa688..73f2bce 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -40,6 +40,7 @@
 #include <plat/mfc.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
+#include <plat/hdmi.h>
 
 #include <mach/map.h>
 #include <mach/ohci.h>
@@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
 	.pwm_period_ns  = 1000,
 };
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* direct HPD to HDMI chip */
@@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 07f7c22..d004d37 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+imx5-pm-$(CONFIG_PM) += pm-imx5.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o
@@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-obj-$(CONFIG_CPU_V7) += head-v7.o
-AFLAGS_head-v7.o :=-Wa,-march=armv7-a
-obj-$(CONFIG_SMP) += platsmp.o
+AFLAGS_headsmp.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
 endif
 
 # i.MX5 based machines
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index ea89520..4233d9e 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -152,7 +152,7 @@ enum mx6q_clks {
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
-	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
+	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	clk_max
 };
 
@@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void)
 	clk[gpu3d_shader]     = imx_clk_divider("gpu3d_shader",     "gpu3d_shader_sel",  base + 0x18, 29, 3);
 	clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
 	clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
-	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_sel",       base + 0x20, 10, 1);
-	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_sel",       base + 0x20, 11, 1);
+	clk[ldb_di0_div_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_div_3_5",       base + 0x20, 10, 1);
+	clk[ldb_di1_div_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_div_3_5",   base + 0x20, 11, 1);
 	clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
 	clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
 	clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S
index 7e49deb..7e49deb 100644
--- a/arch/arm/mach-imx/head-v7.S
+++ b/arch/arm/mach-imx/headsmp.S
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 20ed2d5..f8f7437 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void)
 	  : "cc");
 }
 
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
-	cpu_do_idle();
-	cpu_leave_lowpower();
 
-	/* We should never return from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+	/* spin here until hardware takes it down */
+	while (1)
+		;
 }
 
 int platform_cpu_disable(unsigned int cpu)
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 5ec0608..045b3f6 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -71,7 +71,7 @@ soft:
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB)) {
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
 		phy_write(phydev, 0x0b, 0x8105);
 		phy_write(phydev, 0x0c, 0x0000);
@@ -112,7 +112,7 @@ put_clk:
 
 static void __init imx6q_sabrelite_init(void)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB))
+	if (IS_BUILTIN(CONFIG_PHYLIB))
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
 	imx6q_sabrelite_cko1_setup();
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index a571755..a13299d 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
 dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
 dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
 dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-qnap-ts219.dtb
+dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6281.dtb
+dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c4b64ad..3226077 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-			IRQ_KIRKWOOD_GE00_ERR);
+			IRQ_KIRKWOOD_GE00_ERR, 1600);
 	/* The interface forgets the MAC address assigned by u-boot if
 	the clock is turned off, so claim the clk now. */
 	clk_prepare_enable(ge0);
@@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-			IRQ_KIRKWOOD_GE01_ERR);
+			IRQ_KIRKWOOD_GE01_ERR, 1600);
 	clk_prepare_enable(ge1);
 }
 
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index 4304f95..7e8a5a2 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret = 0;
 
-	if (!pdata && !pdata->pool_name)
+	if (!pdata || !pdata->pool_name)
 		return -ENODEV;
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 62b53d7..a9bc841 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -37,7 +37,7 @@
 #define WIN0_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
 #define WIN8_OFF(n)		(BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
 
-static void __init __iomem *win_cfg_base(int win)
+static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
 {
 	/*
 	 * Find the control register base address for this window.
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index b4c53b8..3057f7d 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-			IRQ_MV78XX0_GE_ERR);
+			IRQ_MV78XX0_GE_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
@@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ);
+			NO_IRQ,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index dd2db02..fcd4e85 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -62,13 +62,14 @@ config ARCH_OMAP4
 	select PM_OPP if PM
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_CPU_SUSPEND if PM
-	select ARCH_NEEDS_CPU_IDLE_COUPLED
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 
 config SOC_OMAP5
 	bool "TI OMAP5"
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_SMP
+	select ARM_CPU_SUSPEND if PM
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 7491529..2821448 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
+	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ef230a0..0d362e9 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -58,6 +58,7 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
+#define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
 #define OMAP3_EVM_EHCI_SELECT	61
 
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 1473474..c187586 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
 
-/*
- * ADS7846 driver maybe request a gpio according to the value
- * of pdata->get_pendown_state, but we have done this. So set
- * get_pendown_state to avoid twice gpio requesting.
- */
-static int omap3_get_pendown_state(void)
-{
-	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
-}
-
 static struct ads7846_platform_data ads7846_config = {
 	.x_max			= 0x0fff,
 	.y_max			= 0x0fff,
@@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = {
 	.debounce_rep		= 1,
 	.gpio_pendown		= -EINVAL,
 	.keep_vref_on		= 1,
-	.get_pendown_state	= &omap3_get_pendown_state,
 };
 
 static struct spi_board_info ads7846_spi_board_info __initdata = {
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index 4c4ef6a..a0b4a428 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,7 +4,6 @@
 #include "twl-common.h"
 
 #define NAND_BLOCK_SIZE	SZ_128K
-#define OMAP3_EVM_TS_GPIO	175
 
 struct mtd_partition;
 struct ads7846_platform_data;
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index ee05e19..288bee6 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -238,8 +238,9 @@ int __init omap4_idle_init(void)
 	for_each_cpu(cpu_id, cpu_online_mask) {
 		dev = &per_cpu(omap4_idle_dev, cpu_id);
 		dev->cpu = cpu_id;
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
 		dev->coupled_cpus = *cpu_online_mask;
-
+#endif
 		cpuidle_register_driver(&omap4_idle_driver);
 
 		if (cpuidle_register_device(dev)) {
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 471e62a..76f9b3c 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -127,7 +127,6 @@ struct omap_mux_partition {
  * @gpio:	GPIO number
  * @muxnames:	available signal modes for a ball
  * @balls:	available balls on the package
- * @partition:	mux partition
  */
 struct omap_mux {
 	u16	reg_offset;
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index 2293ba2..c95415d 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -94,7 +94,7 @@ int __init omap4_opp_init(void)
 {
 	int r = -ENODEV;
 
-	if (!cpu_is_omap44xx())
+	if (!cpu_is_omap443x())
 		return r;
 
 	r = omap_init_opp_table(omap44xx_opp_def_list,
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index e4fc88c..05bd8f0 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -272,21 +272,16 @@ void omap_sram_idle(void)
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
 
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(mpu_pwrdm);
-		pwrdm_pre_transition(neon_pwrdm);
-	}
+	pwrdm_pre_transition(NULL);
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(per_pwrdm);
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 		omap2_gpio_prepare_for_idle(per_going_off);
 	}
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(core_pwrdm);
 		if (core_next_state == PWRDM_POWER_OFF) {
 			omap3_core_save_context();
 			omap3_cm_save_context();
@@ -339,20 +334,14 @@ void omap_sram_idle(void)
 			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
-		pwrdm_post_transition(core_pwrdm);
 	}
 	omap3_intc_resume_idle();
 
+	pwrdm_post_transition(NULL);
+
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
+	if (per_next_state < PWRDM_POWER_ON)
 		omap2_gpio_resume_after_idle();
-		pwrdm_post_transition(per_pwrdm);
-	}
-
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_post_transition(mpu_pwrdm);
-		pwrdm_post_transition(neon_pwrdm);
-	}
 }
 
 static void omap3_pm_idle(void)
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 9f6b83d..91e71d8 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -56,9 +56,13 @@ ppa_por_params:
  * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
  * It returns to the caller for CPU INACTIVE and ON power states or in case
  * CPU failed to transition to targeted OFF/DORMANT state.
+ *
+ * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save
+ * stack frame and it expects the caller to take care of it. Hence the entire
+ * stack frame is saved to avoid possible stack corruption.
  */
 ENTRY(omap4_finish_suspend)
-	stmfd	sp!, {lr}
+	stmfd	sp!, {r4-r12, lr}
 	cmp	r0, #0x0
 	beq	do_WFI				@ No lowpower state, jump to WFI
 
@@ -226,7 +230,7 @@ scu_gp_clear:
 skip_scu_gp_clear:
 	isb
 	dsb
-	ldmfd	sp!, {pc}
+	ldmfd	sp!, {r4-r12, pc}
 ENDPROC(omap4_finish_suspend)
 
 /*
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index de47f17..db5ff66 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
 {
+	omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
 	strncpy(pmic_i2c_board_info.type, pmic_type,
 		sizeof(pmic_i2c_board_info.type));
 	pmic_i2c_board_info.irq = pmic_irq;
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 9148b22..410291c 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-			IRQ_ORION5X_ETH_ERR);
+			IRQ_ORION5X_ETH_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot
index c77a488..98167da 100644
--- a/arch/arm/mach-prima2/Makefile.boot
+++ b/arch/arm/mach-prima2/Makefile.boot
@@ -1,3 +1,5 @@
 zreladdr-y		+= 0x00008000
 params_phys-y		:= 0x00000100
 initrd_phys-y		:= 0x00800000
+
+dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index 454831b..ee99fd5 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -24,7 +24,8 @@
 */
 
 enum dma_ch {
-	DMACH_XD0,
+	DMACH_DT_PROP = -1,	/* not yet supported, do not use */
+	DMACH_XD0 = 0,
 	DMACH_XD1,
 	DMACH_SDI,
 	DMACH_SPI0,
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c013bbf..53d3d46 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -41,7 +41,6 @@ config MACH_HREFV60
 config MACH_SNOWBALL
 	bool "U8500 Snowball platform"
 	select MACH_MOP500
-	select LEDS_GPIO
 	help
 	  Include support for the snowball development platform.
 
diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c
index 9960480..df15646 100644
--- a/arch/arm/mach-ux500/board-mop500-msp.c
+++ b/arch/arm/mach-ux500/board-mop500-msp.c
@@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent,
 	return pdev;
 }
 
-/* Platform device for ASoC U8500 machine */
-static struct platform_device snd_soc_u8500 = {
-		.name = "snd-soc-u8500",
+/* Platform device for ASoC MOP500 machine */
+static struct platform_device snd_soc_mop500 = {
+		.name = "snd-soc-mop500",
 		.id = 0,
 		.dev = {
 			.platform_data = NULL,
@@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent)
 {
 	struct platform_device *msp1;
 
-	pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
-	platform_device_register(&snd_soc_u8500);
+	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
+	platform_device_register(&snd_soc_mop500);
 
 	pr_info("Initialize MSP I2S-devices.\n");
 	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 8674a89..a534d88 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -797,6 +797,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
+		mop500_msp_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 		i2c_register_board_info(2, mop500_i2c2_devices,
@@ -804,6 +805,8 @@ static void __init u8500_init_machine(void)
 
 		mop500_uib_init();
 
+	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+		mop500_msp_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
 		/*
 		 * The HREFv60 board removed a GPIO expander and routed
@@ -815,6 +818,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		hrefv60_sdi_init(parent);
+		mop500_msp_init(parent);
 
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 626ad8c..938b50a 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 		timer->reserved = 1;
 		break;
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer request failed!\n", __func__);
@@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			break;
 		}
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer%d request failed!\n", __func__, id);
@@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-	pm_runtime_put(&timer->pdev->dev);
+	pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 68b180e..bb5d08a 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx() || soc_is_omap54xx())
+				cpu_is_omap44xx() || soc_is_omap54xx() || \
+				soc_is_am33xx())
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index 045e320..324d31b 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -108,4 +108,13 @@
 # endif
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME am33xx
+# endif
+#endif
+
 #endif	/* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index b8d19a1..7f7b112 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -110,7 +110,7 @@ static inline void flush(void)
 	_DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
 		AM33XXUART##p)
 
-static inline void __arch_decomp_setup(unsigned long arch_id)
+static inline void arch_decomp_setup(void)
 {
 	int port = 0;
 
@@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 	} while (0);
 }
 
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
 /*
  * nothing to do
  */
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index d245a87..b8b747a 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = {
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge00_shared_data,
 		    orion_ge00_resources, irq, &orion_ge00_shared,
 		    eth_data, &orion_ge00);
@@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = {
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge01_shared_data,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
 		    eth_data, &orion_ge01);
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index e00fdb2..ae2377e 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase,
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 28f898f..db98e70 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
  * when necessary.
 */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 74e31ce..fc49f3d 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -32,6 +32,8 @@
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
+#include <media/s5p_hdmi.h>
+
 #include <asm/irq.h>
 #include <asm/pmu.h>
 #include <asm/mach/arch.h>
@@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	if (!pd) {
 		pd = &default_i2c_data;
 
-		if (soc_is_exynos4210())
+		if (soc_is_exynos4210() ||
+		    soc_is_exynos4212() || soc_is_exynos4412())
 			pd->bus_num = 8;
 		else if (soc_is_s5pv210())
 			pd->bus_num = 3;
@@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
 			       &s5p_device_i2c_hdmiphy);
 }
+
+struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
+
+void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus)
+{
+	struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
+
+	if (soc_is_exynos4210() ||
+	    soc_is_exynos4212() || soc_is_exynos4412())
+		pd->hdmiphy_bus = 8;
+	else if (soc_is_s5pv210())
+		pd->hdmiphy_bus = 3;
+	else
+		pd->hdmiphy_bus = 0;
+
+	pd->hdmiphy_info = hdmiphy_info;
+	pd->mhl_info = mhl_info;
+	pd->mhl_bus = mhl_bus;
+
+	s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data),
+			 &s5p_device_hdmi);
+}
+
 #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
 
 /* I2S */
diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h
new file mode 100644
index 0000000..331d046
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/hdmi.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_HDMI_H
+#define __PLAT_SAMSUNG_HDMI_H __FILE__
+
+extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus);
+
+#endif /* __PLAT_SAMSUNG_HDMI_H */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 64ab65f..1507028 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot;
 
 #ifdef CONFIG_SAMSUNG_PM_DEBUG
 
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
 
 static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 {