Merge 3.8-rc5 into tty-next

This resolves a number of tty driver merge issues found in linux-next

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

60 files changed, 373 insertions, 238 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e44da40..5ebb44f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 
 targets += dtbs
+targets += $(dtb-y)
 endif
 
 # *.dtb used to be generated in the directory above. Clean out the
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 0004402..9b82fac 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -26,7 +26,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
+		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 271855a..e041f42 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -50,27 +50,25 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <17>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>;
+			interrupts = <87>, <88>, <89>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 1c1937d..9e23bd8 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -51,39 +51,36 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>, <23>;
+			interrupts = <87>, <88>, <89>, <90>;
 		};
 
 		gpio2: gpio@d0018180 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018180 0x40>,
-			    <0xd0018870 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <24>;
+			interrupts = <91>;
 		};
 
 		ethernet@d0034000 {
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 4905cf3..9659661 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -66,39 +66,36 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>, <23>;
+			interrupts = <87>, <88>, <89>, <90>;
 		};
 
 		gpio2: gpio@d0018180 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018180 0x40>,
-			    <0xd0018870 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <24>;
+			interrupts = <91>;
 		};
 
 		ethernet@d0034000 {
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index e154f24..222047f 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -336,8 +336,8 @@
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 23 0 /* sda */
-			 &pioA 24 0 /* scl */
+		gpios = <&pioA 25 0 /* sda */
+			 &pioA 26 0 /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 68bccf4..cb7bcc5 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -306,6 +306,22 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<1 16 0x1 0x0	/* PB16 periph A */
+							 1 17 0x1 0x0	/* PB17 periph A */
+							 1 18 0x1 0x0>;	/* PB18 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<1 19 0x1 0x0	/* PB19 periph A */
+							 1 20 0x1 0x0	/* PB20 periph A */
+							 1 21 0x1 0x0>;	/* PB21 periph A */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -450,6 +466,8 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffbc000 0x4000>;
 				interrupts = <14 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 32ec62c..271d4de 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -271,6 +271,38 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<1 0 0x2 0x0	/* PB0 periph B */
+							 1 1 0x2 0x0	/* PB1 periph B */
+							 1 2 0x2 0x0>;	/* PB2 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<1 3 0x2 0x0	/* PB3 periph B */
+							 1 4 0x2 0x0	/* PB4 periph B */
+							 1 5 0x2 0x0>;	/* PB5 periph B */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<1 6 0x1 0x0	/* PB6 periph A */
+							 1 7 0x1 0x0	/* PB7 periph A */
+							 1 8 0x1 0x0>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<1 9 0x1 0x0	/* PB9 periph A */
+							 1 10 0x1 0x0	/* PB10 periph A */
+							 1 11 0x1 0x0>;	/* PB11 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -368,6 +400,8 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff98000 0x4000>;
 				interrupts = <16 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 
@@ -375,6 +409,8 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <17 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 231858f..6b1d4ca 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -290,6 +290,38 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<3 0 0x1 0x0	/* PD0 periph A */
+							 3 1 0x1 0x0	/* PD1 periph A */
+							 3 2 0x1 0x0>;	/* PD2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<3 3 0x1 0x0	/* PD3 periph A */
+							 3 4 0x1 0x0	/* PD4 periph A */
+							 3 5 0x1 0x0>;	/* PD5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<3 10 0x1 0x0	/* PD10 periph A */
+							 3 11 0x1 0x0	/* PD11 periph A */
+							 3 12 0x1 0x0>;	/* PD12 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<3 13 0x1 0x0	/* PD13 periph A */
+							 3 14 0x1 0x0	/* PD14 periph A */
+							 3 15 0x1 0x0>;	/* PD15 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -425,6 +457,8 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <16 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 
@@ -432,6 +466,8 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfffa0000 0x4000>;
 				interrupts = <17 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index e9efb34..80e29c6 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -28,6 +28,7 @@
 		tcb1 = &tcb1;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
+		ssc0 = &ssc0;
 	};
 	cpus {
 		cpu@0 {
@@ -244,6 +245,22 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<0 24 0x2 0x0	/* PA24 periph B */
+							 0 25 0x2 0x0	/* PA25 periph B */
+							 0 26 0x2 0x0>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<0 27 0x2 0x0	/* PA27 periph B */
+							 0 28 0x2 0x0	/* PA28 periph B */
+							 0 29 0x2 0x0>;	/* PA29 periph B */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -294,6 +311,15 @@
 				status = "disabled";
 			};
 
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 40ac3a4..8ecca69 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -88,13 +88,6 @@
 				interrupts = <1 4 7>;
 			};
 
-			ssc0: ssc@f0010000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xf0010000 0x4000>;
-				interrupts = <28 4 5>;
-				status = "disabled";
-			};
-
 			tcb0: timer@f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;
@@ -150,6 +143,11 @@
 						atmel,pins =
 							<0 3 0x1 0x0>;	/* PA3 periph A */
 					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<0 4 0x1 0x0>;	/* PA4 periph A */
+					};
 				};
 
 				usart1 {
@@ -161,12 +159,17 @@
 
 					pinctrl_usart1_rts: usart1_rts-0 {
 						atmel,pins =
-							<3 27 0x3 0x0>;	/* PC27 periph C */
+							<2 27 0x3 0x0>;	/* PC27 periph C */
 					};
 
 					pinctrl_usart1_cts: usart1_cts-0 {
 						atmel,pins =
-							<3 28 0x3 0x0>;	/* PC28 periph C */
+							<2 28 0x3 0x0>;	/* PC28 periph C */
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<2 28 0x3 0x0>;	/* PC29 periph C */
 					};
 				};
 
@@ -179,46 +182,56 @@
 
 					pinctrl_uart2_rts: uart2_rts-0 {
 						atmel,pins =
-							<0 0 0x2 0x0>;	/* PB0 periph B */
+							<1 0 0x2 0x0>;	/* PB0 periph B */
 					};
 
 					pinctrl_uart2_cts: uart2_cts-0 {
 						atmel,pins =
-							<0 1 0x2 0x0>;	/* PB1 periph B */
+							<1 1 0x2 0x0>;	/* PB1 periph B */
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<1 2 0x2 0x0>;	/* PB2 periph B */
 					};
 				};
 
 				usart3 {
 					pinctrl_uart3: usart3-0 {
 						atmel,pins =
-							<3 23 0x2 0x1	/* PC22 periph B with pullup */
-							 3 23 0x2 0x0>;	/* PC23 periph B */
+							<2 23 0x2 0x1	/* PC22 periph B with pullup */
+							 2 23 0x2 0x0>;	/* PC23 periph B */
 					};
 
 					pinctrl_usart3_rts: usart3_rts-0 {
 						atmel,pins =
-							<3 24 0x2 0x0>;	/* PC24 periph B */
+							<2 24 0x2 0x0>;	/* PC24 periph B */
 					};
 
 					pinctrl_usart3_cts: usart3_cts-0 {
 						atmel,pins =
-							<3 25 0x2 0x0>;	/* PC25 periph B */
+							<2 25 0x2 0x0>;	/* PC25 periph B */
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<2 26 0x2 0x0>;	/* PC26 periph B */
 					};
 				};
 
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<3 8 0x3 0x0	/* PC8 periph C */
-							 3 9 0x3 0x1>;	/* PC9 periph C with pullup */
+							<2 8 0x3 0x0	/* PC8 periph C */
+							 2 9 0x3 0x1>;	/* PC9 periph C with pullup */
 					};
 				};
 
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<3 16 0x3 0x0	/* PC16 periph C */
-							 3 17 0x3 0x1>;	/* PC17 periph C with pullup */
+							<2 16 0x3 0x0	/* PC16 periph C */
+							 2 17 0x3 0x1>;	/* PC17 periph C with pullup */
 					};
 				};
 
@@ -247,14 +260,14 @@
 
 					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
 						atmel,pins =
-							<1 8 0x1 0x0	/* PA8 periph A */
-							 1 11 0x1 0x0	/* PA11 periph A */
-							 1 12 0x1 0x0	/* PA12 periph A */
-							 1 13 0x1 0x0	/* PA13 periph A */
-							 1 14 0x1 0x0	/* PA14 periph A */
-							 1 15 0x1 0x0	/* PA15 periph A */
-							 1 16 0x1 0x0	/* PA16 periph A */
-							 1 17 0x1 0x0>;	/* PA17 periph A */
+							<1 8 0x1 0x0	/* PB8 periph A */
+							 1 11 0x1 0x0	/* PB11 periph A */
+							 1 12 0x1 0x0	/* PB12 periph A */
+							 1 13 0x1 0x0	/* PB13 periph A */
+							 1 14 0x1 0x0	/* PB14 periph A */
+							 1 15 0x1 0x0	/* PB15 periph A */
+							 1 16 0x1 0x0	/* PB16 periph A */
+							 1 17 0x1 0x0>;	/* PB17 periph A */
 					};
 				};
 
@@ -290,6 +303,22 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<0 24 0x2 0x0	/* PA24 periph B */
+							 0 25 0x2 0x0	/* PA25 periph B */
+							 0 26 0x2 0x0>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<0 27 0x2 0x0	/* PA27 periph B */
+							 0 28 0x2 0x0	/* PA28 periph B */
+							 0 29 0x2 0x0>;	/* PA29 periph B */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -333,6 +362,15 @@
 				};
 			};
 
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
 			mmc0: mmc@f0008000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index fddd174..46c0980 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -96,8 +96,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
@@ -120,8 +120,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
@@ -141,8 +141,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index fed7d3f..cdee96f 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -26,10 +26,15 @@
 };
 
 &uart0 { status = "okay"; };
-&sdio0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &i2c0 { status = "okay"; };
 
+&sdio0 {
+	status = "okay";
+	/* sdio0 card detect is connected to wrong pin on CuBox */
+	cd-gpios = <&gpio0 12 1>;
+};
+
 &spi0 {
 	status = "okay";
 
@@ -42,9 +47,14 @@
 };
 
 &pinctrl {
-	pinctrl-0 = <&pmx_gpio_18>;
+	pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
 	pinctrl-names = "default";
 
+	pmx_gpio_12: pmx-gpio-12 {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+
 	pmx_gpio_18: pmx-gpio-18 {
 		marvell,pins = "mpp18";
 		marvell,function = "gpio";
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 942d576..e05b18f 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -115,8 +115,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
@@ -139,8 +139,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 9bc6785..77d21ab 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	chosen {
@@ -6,6 +7,21 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
+					&pmx_ns2_sata0 &pmx_ns2_sata1>;
+			pinctrl-names = "default";
+
+			pmx_ns2_sata0: pmx-ns2-sata0 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_ns2_sata1: pmx-ns2-sata1 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+		};
+
 		serial@12000 {
 			clock-frequency = <166666667>;
 			status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 110d6cb..d6ab442 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -36,6 +36,7 @@
 			reg = <0x10100 0x40>;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <35>, <36>, <37>, <38>;
 		};
 
@@ -46,6 +47,7 @@
 			reg = <0x10140 0x40>;
 			ngpios = <18>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <39>, <40>, <41>;
 		};
 
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
index e8814fe..b4dc3ed 100644
--- a/arch/arm/boot/dts/kizbox.dts
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -48,6 +48,8 @@
 
 			macb0: ethernet@fffc4000 {
 				phy-mode = "mii";
+				pinctrl-0 = <&pinctrl_macb_rmii
+				             &pinctrl_macb_rmii_mii_alt>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi
index 8bbc2bf..8b36abe 100644
--- a/arch/arm/boot/dts/sunxi.dtsi
+++ b/arch/arm/boot/dts/sunxi.dtsi
@@ -60,19 +60,21 @@
 		};
 
 		uart0: uart@01c28000 {
-			compatible = "ns8250";
+			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 			interrupts = <1>;
 			reg-shift = <2>;
+			reg-io-width = <4>;
 			clock-frequency = <24000000>;
 			status = "disabled";
 		};
 
 		uart1: uart@01c28400 {
-			compatible = "ns8250";
+			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
 			interrupts = <2>;
 			reg-shift = <2>;
+			reg-io-width = <4>;
 			clock-frequency = <24000000>;
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 1fc405a..cf8071a 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -45,7 +45,6 @@
 			reg = <1>;
 		};
 
-/* A7s disabled till big.LITTLE patches are available...
 		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
@@ -63,7 +62,6 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 		};
-*/
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index b175577..1ea9590 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y
 CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
 CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
@@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
 CONFIG_KEXEC=y
 CONFIG_AUTO_ZRELADDR=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 6809200..14f7c3b 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -100,12 +100,14 @@ ENTRY(printch)
 		b	1b
 ENDPROC(printch)
 
+#ifdef CONFIG_MMU
 ENTRY(debug_ll_addr)
 		addruart r2, r3, ip
 		str	r2, [r0]
 		str	r3, [r1]
 		mov	pc, lr
 ENDPROC(debug_ll_addr)
+#endif
 
 #else
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 4eee351..486a15a 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -246,6 +246,7 @@ __create_page_tables:
 
 	/*
 	 * Then map boot params address in r2 if specified.
+	 * We map 2 sections in case the ATAGs/DTB crosses a section boundary.
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
 	movs	r0, r0, lsl #SECTION_SHIFT
@@ -253,6 +254,8 @@ __create_page_tables:
 	addne	r3, r3, #PAGE_OFFSET
 	addne	r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
 	orrne	r6, r7, r0
+	strne	r6, [r3], #1 << PMD_ORDER
+	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
 
 #ifdef CONFIG_DEBUG_LL
@@ -331,7 +334,7 @@ ENTRY(secondary_startup)
 	 * as it has already been validated by the primary processor.
 	 */
 #ifdef CONFIG_ARM_VIRT_EXT
-	bl	__hyp_stub_install
+	bl	__hyp_stub_install_secondary
 #endif
 	safe_svcmode_maskall r9
 
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 65b2417..1315c4c 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary)
 	 * immediately.
 	 */
 	compare_cpu_mode_with_primary	r4, r5, r6, r7
-	bxne	lr
+	movne	pc, lr
 
 	/*
 	 * Once we have given up on one CPU, we do not try to install the
@@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary)
 	 */
 
 	cmp	r4, #HYP_MODE
-	bxne	lr			@ give up if the CPU is not in HYP mode
+	movne	pc, lr			@ give up if the CPU is not in HYP mode
 
 /*
  * Configure HSCTLR to set correct exception endianness/instruction set
@@ -120,7 +120,8 @@ ENTRY(__hyp_stub_install_secondary)
  * Eventually, CPU-specific code might be needed -- assume not for now
  *
  * This code relies on the "eret" instruction to synchronize the
- * various coprocessor accesses.
+ * various coprocessor accesses. This is done when we switch to SVC
+ * (see safe_svcmode_maskall).
  */
 	@ Now install the hypervisor stub:
 	adr	r7, __hyp_stub_vectors
@@ -155,14 +156,7 @@ THUMB(	orr	r7, #(1 << 30)	)	@ HSCTLR.TE
 1:
 #endif
 
-	bic	r7, r4, #MODE_MASK
-	orr	r7, r7, #SVC_MODE
-THUMB(	orr	r7, r7, #PSR_T_BIT	)
-	msr	spsr_cxsf, r7		@ This is SPSR_hyp.
-
-	__MSR_ELR_HYP(14)		@ msr elr_hyp, lr
-	__ERET				@ return, switching to SVC mode
-					@ The boot CPU mode is left in r4.
+	bx	lr			@ The boot CPU mode is left in r4.
 ENDPROC(__hyp_stub_install_secondary)
 
 __hyp_stub_do_trap:
@@ -200,7 +194,7 @@ ENDPROC(__hyp_get_vectors)
 	@ fall through
 ENTRY(__hyp_set_vectors)
 	__HVC(0)
-	bx	lr
+	mov	pc, lr
 ENDPROC(__hyp_set_vectors)
 
 #ifndef ZIMAGE
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 9ee866c..4b67847 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base)
 	switch (socid) {
 	case ARCH_ID_AT91RM9200:
 		at91_soc_initdata.type = AT91_SOC_RM9200;
+		if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+			at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
 		at91_boot_soc = at91rm9200_soc;
 		break;
 
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3e628fd..0a2349d 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -851,6 +851,7 @@ config SOC_IMX6Q
 	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
 	select HAVE_SMP
 	select MFD_SYSCON
 	select PINCTRL
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index b197aa7..2c570cd 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
 	clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
 	/* i.mx25 has the i.mx35 type cspi */
 	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 4c1d1e4..1ffe3b534 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
 	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
 	clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 8be64e0..16ccbd4 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
 	/* i.mx31 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 66f3d65..f0727e8 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -251,9 +251,9 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 579023f..fb7cb84 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
 	clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 7f2c10c..c0c4e72 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clk[clks_init_on[i]]);
 
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 7191ab4..fa36fb8 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_clock_map_io(void);
 
 extern void imx_cpu_die(unsigned int cpu);
+extern int imx_cpu_kill(unsigned int cpu);
 
 #ifdef CONFIG_PM
 extern void imx6q_pm_init(void);
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 6277baf..9bd5777 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
 
 #include <linux/fsl_devices.h>
 struct imx_fsl_usb2_udc_data {
+	const char *devid;
 	resource_size_t iobase;
 	resource_size_t irq;
 };
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 37e4439..3c06bd9 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -11,35 +11,36 @@
 #include "../hardware.h"
 #include "devices-common.h"
 
-#define imx_fsl_usb2_udc_data_entry_single(soc)				\
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid)			\
 	{								\
+		.devid = _devid,					\
 		.iobase = soc ## _USB_OTG_BASE_ADDR,			\
 		.irq = soc ## _INT_USB_OTG,				\
 	}
 
 #ifdef CONFIG_SOC_IMX25
 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX25);
+	imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX27);
+	imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
 #ifdef CONFIG_SOC_IMX31
 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX31);
+	imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX35);
+	imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
 #ifdef CONFIG_SOC_IMX51
 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX51);
+	imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
 #endif
 
 struct platform_device *__init imx_add_fsl_usb2_udc(
@@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-	return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+	return imx_add_platform_device_dmamask(data->devid, -1,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
index 10b0ed3..25a47c6 100644
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-	return imx_add_platform_device_dmamask("imx-fb", 0,
+	return imx_add_platform_device_dmamask(data->devid, 0,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 3dec962..7bc5fe1 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
-	imx_enable_cpu(cpu, false);
+	cpu_do_idle();
+}
 
-	/* spin here until hardware takes it down */
-	while (1)
-		;
+int imx_cpu_kill(unsigned int cpu)
+{
+	imx_enable_cpu(cpu, false);
+	return 1;
 }
diff --git a/arch/arm/mach-imx/iram.h b/arch/arm/mach-imx/iram.h
deleted file mode 100644
index 022690c..0000000
--- a/arch/arm/mach-imx/iram.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/errno.h>
-
-#ifdef CONFIG_IRAM_ALLOC
-
-int __init iram_init(unsigned long base, unsigned long size);
-void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr);
-void iram_free(unsigned long dma_addr, unsigned int size);
-
-#else
-
-static inline int __init iram_init(unsigned long base, unsigned long size)
-{
-	return -ENOMEM;
-}
-
-static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
-{
-	return NULL;
-}
-
-static inline void iram_free(unsigned long base, unsigned long size) {}
-
-#endif
diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c
index 6c80424..e05cf40 100644
--- a/arch/arm/mach-imx/iram_alloc.c
+++ b/arch/arm/mach-imx/iram_alloc.c
@@ -22,8 +22,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/genalloc.h>
-
-#include "iram.h"
+#include "linux/platform_data/imx-iram.h"
 
 static unsigned long iram_phys_base;
 static void __iomem *iram_virt_base;
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 3777b80..66fae88 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -92,5 +92,6 @@ struct smp_operations  imx_smp_ops __initdata = {
 	.smp_boot_secondary	= imx_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= imx_cpu_die,
+	.cpu_kill		= imx_cpu_kill,
 #endif
 };
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index a17543d..ee42d20 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		cpu_suspend(0, imx6q_suspend_finish);
 		imx_smp_prepare();
 		imx_gpc_post_resume();
+		imx6q_set_lpm(WAIT_CLOCKED);
 		break;
 	default:
 		return -EINVAL;
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index be50e79..e7fcea7 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 {
 	int ret = 0;
 
+	if (!ap_syscon_base)
+		return -EINVAL;
+
 	if (nr == 0) {
 		sys->mem_offset = PHYS_PCI_MEM_BASE;
 		ret = pci_v3_setup_resources(sys);
-		/* Remap the Integrator system controller */
-		ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
-		if (!ap_syscon_base)
-			return -EINVAL;
 	}
 
 	return ret;
@@ -497,6 +496,13 @@ void __init pci_v3_preinit(void)
 	unsigned int temp;
 	int ret;
 
+	/* Remap the Integrator system controller */
+	ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
+	if (!ap_syscon_base) {
+		pr_err("unable to remap the AP syscon for PCIv3\n");
+		return;
+	}
+
 	pcibios_min_mem = 0x00100000;
 
 	/*
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index 8821720..f4632a8 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -18,47 +18,11 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data ns2_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int ns2_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,		/* Fan speed (bit 1) */
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_GPO,		/* Red led */
-	MPP14_GPIO,		/* USB fuse */
-	MPP16_GPIO,		/* SATA 0 power */
-	MPP17_GPIO,		/* SATA 1 power */
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP20_SATA1_ACTn,
-	MPP21_SATA0_ACTn,
-	MPP22_GPIO,		/* Fan speed (bit 0) */
-	MPP23_GPIO,		/* Fan power */
-	MPP24_GPIO,		/* USB mode select */
-	MPP25_GPIO,		/* Fan rotation fail */
-	MPP26_GPIO,		/* USB device vbus */
-	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* Blue led (slow register) */
-	MPP30_GPIO,		/* Blue led (command register) */
-	MPP31_GPIO,		/* Board power off */
-	MPP32_GPIO,		/* Power button (0 = Released, 1 = Pushed) */
-	MPP33_GPO,		/* Fan speed (bit 2) */
-	0
-};
-
 #define NS2_GPIO_POWER_OFF	31
 
 static void ns2_power_off(void)
@@ -71,8 +35,6 @@ void __init ns2_init(void)
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(ns2_mpp_config);
-
 	if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
 	    of_machine_is_compatible("lacie,netspace_mini_v2"))
 		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 5dcb369..99df4df 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,6 +1,8 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-orion/include
 
+AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
+
 obj-y += system-controller.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 5c8e9ce..769c1fe 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 		  OMAP_PULL_ENA),
 	OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
 
+	/* UART2 - BT/FM/GPS shared transport */
+	OMAP4_MUX(UART2_CTS,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_RTS,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_RX,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_TX,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
+
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c
index 7e5febe..ab7e952 100644
--- a/arch/arm/mach-omap2/cclock2420_data.c
+++ b/arch/arm/mach-omap2/cclock2420_data.c
@@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
 			omap2_init_clk_hw_omap_clocks(c->lk.clk);
 	}
 
+	omap2xxx_clkt_vps_late_init();
+
 	omap2_clk_disable_autoidle_all();
 
 	omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c
index eda079b..eb3dab6 100644
--- a/arch/arm/mach-omap2/cclock2430_data.c
+++ b/arch/arm/mach-omap2/cclock2430_data.c
@@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
 			omap2_init_clk_hw_omap_clocks(c->lk.clk);
 	}
 
+	omap2xxx_clkt_vps_late_init();
+
 	omap2_clk_disable_autoidle_all();
 
 	omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 5789a5e..a2cc046 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void)
 	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
 	 * state when turning the ABE clock domain. Workaround this by
 	 * locking the ABE DPLL on boot.
+	 * Lock the ABE DPLL in any case to avoid issues with audio.
 	 */
-	if (cpu_is_omap446x()) {
-		rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
-		if (!rc)
-			rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
-		if (rc)
-			pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-	}
+	rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
+	if (!rc)
+		rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5e304d0..626f3ea 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
 	return cnt;
 }
 
-static void omap_init_ocp2scp(void)
+static void __init omap_init_ocp2scp(void)
 {
 	struct omap_hwmod	*oh;
 	struct platform_device	*pdev;
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index 4c7566c..2a2cfa8 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -25,6 +25,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/omap_drm.h>
 
+#include "soc.h"
 #include "omap_device.h"
 #include "omap_hwmod.h"
 
@@ -56,7 +57,7 @@ static int __init omap_init_drm(void)
 			oh->name);
 	}
 
-	platform_data.omaprev = GET_OMAP_REVISION();
+	platform_data.omaprev = GET_OMAP_TYPE;
 
 	return platform_device_register(&omap_drm_device);
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 129d508..793f54a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 	 * currently reset very early during boot, before I2C is
 	 * available, so it doesn't seem that we have any choice in
 	 * the kernel other than to avoid resetting it.
+	 *
+	 * Also, McPDM needs to be configured to NO_IDLE mode when it
+	 * is in used otherwise vital clocks will be gated which
+	 * results 'slow motion' audio playback.
 	 */
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
 	.mpu_irqs	= omap44xx_mcpdm_irqs,
 	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
 	.main_clk	= "mcpdm_fck",
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 691aa67..b8ad6e6 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
 	struct device_node *np;
 
 	for_each_matching_node(np, match) {
-		if (!of_device_is_available(np)) {
-			of_node_put(np);
+		if (!of_device_is_available(np))
 			continue;
-		}
 
-		if (property && !of_get_property(np, property, NULL)) {
-			of_node_put(np);
+		if (property && !of_get_property(np, property, NULL))
 			continue;
-		}
 
 		of_add_property(np, &device_disabled);
 		return np;
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index a611ad3..b6132aa 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -463,6 +463,9 @@
 	GPIO76_LCD_PCLK,	\
 	GPIO77_LCD_BIAS
 
+/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */
+#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT)
+#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT)
 
 extern int keypad_set_wake(unsigned int on);
 #endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 8047ee0..616cb87 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void)
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
 static unsigned long ac97_reset_config[] = {
-	GPIO113_GPIO,
+	GPIO113_AC97_nRESET_GPIO_HIGH,
 	GPIO113_AC97_nRESET,
-	GPIO95_GPIO,
+	GPIO95_AC97_nRESET_GPIO_HIGH,
 	GPIO95_AC97_nRESET,
 };
 
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 553059f..755c0bb 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = {
 		.bus_num	= 0,
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
-		.irq		= S3C_EINT(5),
+		.irq		= S3C_EINT(4),
 		.controller_data = &wm0010_spi_csinfo,
 		.platform_data = &wm0010_pdata,
 	},
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 7feb426..d2e1a16 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -338,8 +338,10 @@ int __init s3c64xx_pm_init(void)
 	for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
 		pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
 
+#ifdef CONFIG_S3C_DEV_FB
 	if (dev_get_platdata(&s3c_device_fb.dev))
 		pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
+#endif
 
 	return 0;
 }
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 6b2fb87..076c26d 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -774,25 +774,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 	size_t size, enum dma_data_direction dir,
 	void (*op)(const void *, size_t, int))
 {
+	unsigned long pfn;
+	size_t left = size;
+
+	pfn = page_to_pfn(page) + offset / PAGE_SIZE;
+	offset %= PAGE_SIZE;
+
 	/*
 	 * A single sg entry may refer to multiple physically contiguous
 	 * pages.  But we still need to process highmem pages individually.
 	 * If highmem is not configured then the bulk of this loop gets
 	 * optimized out.
 	 */
-	size_t left = size;
 	do {
 		size_t len = left;
 		void *vaddr;
 
+		page = pfn_to_page(pfn);
+
 		if (PageHighMem(page)) {
-			if (len + offset > PAGE_SIZE) {
-				if (offset >= PAGE_SIZE) {
-					page += offset / PAGE_SIZE;
-					offset %= PAGE_SIZE;
-				}
+			if (len + offset > PAGE_SIZE)
 				len = PAGE_SIZE - offset;
-			}
 			vaddr = kmap_high_get(page);
 			if (vaddr) {
 				vaddr += offset;
@@ -809,7 +811,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 			op(vaddr, len, dir);
 		}
 		offset = 0;
-		page++;
+		pfn++;
 		left -= len;
 	} while (left);
 }
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 9f06102..ce328c7 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -283,7 +283,7 @@ static struct mem_type mem_types[] = {
 	},
 	[MT_MEMORY_SO] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_MT_UNCACHED,
+				L_PTE_MT_UNCACHED | L_PTE_XN,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
 				PMD_SECT_UNCACHED | PMD_SECT_XN,
diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S
index dd703ef..b178d44 100644
--- a/arch/arm/plat-versatile/headsmp.S
+++ b/arch/arm/plat-versatile/headsmp.S
@@ -20,7 +20,7 @@
  */
 ENTRY(versatile_secondary_startup)
 	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
+	bic	r0, #0xff000000
 	adr	r4, 1f
 	ldmia	r4, {r5, r6}
 	sub	r4, r4, r5
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index cc926c9..323ce1a 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -22,7 +22,7 @@
 @  IRQs disabled.
 @
 ENTRY(do_vfp)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	add	r11, r4, #1		@ increment it
 	str	r11, [r10, #TI_PREEMPT]
@@ -35,7 +35,7 @@ ENTRY(do_vfp)
 ENDPROC(do_vfp)
 
 ENTRY(vfp_null_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
@@ -53,7 +53,7 @@ ENDPROC(vfp_null_entry)
 
 	__INIT
 ENTRY(vfp_testing_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index ea0349f..dd5e56f 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -168,7 +168,7 @@ vfp_hw_state_valid:
 					@ else it's one 32-bit instruction, so
 					@ always subtract 4 from the following
 					@ instruction address.
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
@@ -192,7 +192,7 @@ look_for_VFP_exceptions:
 	@ not recognised by VFP
 
 	DBGSTR	"not VFP"
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it