Blackfin: use on-chip reset func with newer parts

Turns out the documentation is wrong and doing "RAISE 1" does not result
in a software reset, only a core reset.  So when the on-chip rom has a
functioning reset helper, use it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 31 insertions, 34 deletions

diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c
index 53d08de..488bdc5 100644
--- a/arch/blackfin/kernel/reboot.c
+++ b/arch/blackfin/kernel/reboot.c
@@ -23,6 +23,9 @@
 __attribute__ ((__l1_text__, __noreturn__))
 static void bfin_reset(void)
 {
+	if (!ANOMALY_05000353 && !ANOMALY_05000386)
+		bfrom_SoftReset((void *)(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 20));
+
 	/* Wait for completion of "system" events such as cache line
 	 * line fills so that we avoid infinite stalls later on as
 	 * much as possible.  This code is in L1, so it won't trigger
@@ -30,46 +33,40 @@ static void bfin_reset(void)
 	 */
 	__builtin_bfin_ssync();
 
-	/* The bootrom checks to see how it was reset and will
-	 * automatically perform a software reset for us when
-	 * it starts executing after the core reset.
-	 */
-	if (ANOMALY_05000353 || ANOMALY_05000386) {
-		/* Initiate System software reset. */
-		bfin_write_SWRST(0x7);
+	/* Initiate System software reset. */
+	bfin_write_SWRST(0x7);
 
-		/* Due to the way reset is handled in the hardware, we need
-		 * to delay for 10 SCLKS.  The only reliable way to do this is
-		 * to calculate the CCLK/SCLK ratio and multiply 10.  For now,
-		 * we'll assume worse case which is a 1:15 ratio.
-		 */
-		asm(
-			"LSETUP (1f, 1f) LC0 = %0\n"
-			"1: nop;"
-			:
-			: "a" (15 * 10)
-			: "LC0", "LB0", "LT0"
-		);
+	/* Due to the way reset is handled in the hardware, we need
+	 * to delay for 10 SCLKS.  The only reliable way to do this is
+	 * to calculate the CCLK/SCLK ratio and multiply 10.  For now,
+	 * we'll assume worse case which is a 1:15 ratio.
+	 */
+	asm(
+		"LSETUP (1f, 1f) LC0 = %0\n"
+		"1: nop;"
+		:
+		: "a" (15 * 10)
+		: "LC0", "LB0", "LT0"
+	);
 
-		/* Clear System software reset */
-		bfin_write_SWRST(0);
+	/* Clear System software reset */
+	bfin_write_SWRST(0);
 
-		/* The BF526 ROM will crash during reset */
+	/* The BF526 ROM will crash during reset */
 #if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__)
-		bfin_read_SWRST();
+	bfin_read_SWRST();
 #endif
 
-		/* Wait for the SWRST write to complete.  Cannot rely on SSYNC
-		 * though as the System state is all reset now.
-		 */
-		asm(
-			"LSETUP (1f, 1f) LC1 = %0\n"
-			"1: nop;"
-			:
-			: "a" (15 * 1)
-			: "LC1", "LB1", "LT1"
-		);
-	}
+	/* Wait for the SWRST write to complete.  Cannot rely on SSYNC
+	 * though as the System state is all reset now.
+	 */
+	asm(
+		"LSETUP (1f, 1f) LC1 = %0\n"
+		"1: nop;"
+		:
+		: "a" (15 * 1)
+		: "LC1", "LB1", "LT1"
+	);
 
 	while (1)
 		/* Issue core reset */