Move all of include/asm-m68knommu to arch/m68knommu/include/asm.

With the current kbuild infrastructure in place no other changes
are required for this to work.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 63 insertions, 0 deletions

diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68knommu/include/asm/m520xsim.h
new file mode 100644
index 0000000..49d016e
--- /dev/null
+++ b/arch/m68knommu/include/asm/m520xsim.h
@@ -0,0 +1,63 @@
+/****************************************************************************/
+
+/*
+ *  m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
+ *
+ *  (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
+ */
+
+/****************************************************************************/
+#ifndef m520xsim_h
+#define m520xsim_h
+/****************************************************************************/
+
+
+/*
+ *  Define the 5282 SIM register set addresses.
+ */
+#define MCFICM_INTC0        0x48000     /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH        0x00        /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL        0x04        /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH        0x08        /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL        0x0c        /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH     0x10        /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL     0x14        /* Interrupt force 1-31 */
+#define MCFINTC_ICR0        0x40        /* Base ICR register */
+
+#define MCFINT_VECBASE      64
+#define MCFINT_UART0        26          /* Interrupt number for UART0 */
+#define MCFINT_UART1        27          /* Interrupt number for UART1 */
+#define MCFINT_UART2        28          /* Interrupt number for UART2 */
+#define MCFINT_QSPI         31          /* Interrupt number for QSPI */
+#define MCFINT_PIT1         4           /* Interrupt number for PIT1 (PIT0 in processor) */
+
+/*
+ *  SDRAM configuration registers.
+ */
+#define MCFSIM_SDMR         0x000a8000	/* SDRAM Mode/Extended Mode Register */
+#define MCFSIM_SDCR         0x000a8004	/* SDRAM Control Register */
+#define MCFSIM_SDCFG1       0x000a8008	/* SDRAM Configuration Register 1 */
+#define MCFSIM_SDCFG2       0x000a800c	/* SDRAM Configuration Register 2 */
+#define MCFSIM_SDCS0        0x000a8110	/* SDRAM Chip Select 0 Configuration */
+#define MCFSIM_SDCS1        0x000a8114	/* SDRAM Chip Select 1 Configuration */
+
+
+#define MCF_GPIO_PAR_UART                   (0xA4036)
+#define MCF_GPIO_PAR_FECI2C                 (0xA4033)
+#define MCF_GPIO_PAR_FEC                    (0xA4038)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD0         (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_UTXD0         (0x0002)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD1         (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1         (0x0080)
+
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2   (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
+
+#define ICR_INTRCONF		0x05
+#define MCFPIT_IMR		MCFINTC_IMRL
+#define MCFPIT_IMR_IBIT		(1 << MCFINT_PIT1)
+
+/****************************************************************************/
+#endif  /* m520xsim_h */