Move arch headers from include/asm-mn10300/ to arch/mn10300/include/asm/.

Signed-off-by: David Howells <dhowells@redhat.com>

121 files changed, 9123 insertions, 14 deletions

diff --git a/arch/mn10300/Makefile b/arch/mn10300/Makefile
index 6673a28..a5985ee 100644
--- a/arch/mn10300/Makefile
+++ b/arch/mn10300/Makefile
@@ -105,31 +105,31 @@ endif
 ###################################################################################################
 
 # processor specific definitions
-include/asm-mn10300/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-mn10300/proc -> include/asm-mn10300/proc-$(PROCESSOR)'
+arch/mn10300/include/asm/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf
+	@echo '  SYMLINK arch/mn10300/include/asm/proc -> arch/mn10300/include/asm/proc-$(PROCESSOR)'
 ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-mn10300
-	$(Q)ln -fsn $(srctree)/include/asm-mn10300/proc-$(PROCESSOR) include/asm-mn10300/proc
+	$(Q)mkdir -p arch/mn10300/include/asm
+	$(Q)ln -fsn $(srctree)/arch/mn10300/include/asm/proc-$(PROCESSOR) arch/mn10300/include/asm/proc
 else
-	$(Q)ln -fsn proc-$(PROCESSOR) include/asm-mn10300/proc
+	$(Q)ln -fsn proc-$(PROCESSOR) arch/mn10300/include/asm/proc
 endif
 	@touch $@
 
-CLEAN_FILES += include/asm-mn10300/proc include/asm-mn10300/.proc
+CLEAN_FILES += arch/mn10300/include/asm/proc arch/mn10300/include/asm/.proc
 
-prepare: include/asm-mn10300/.proc
+prepare: arch/mn10300/include/asm/.proc
 
 # unit specific definitions
-include/asm-mn10300/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-mn10300/unit -> include/asm-mn10300/unit-$(UNIT)'
+arch/mn10300/include/asm/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf
+	@echo '  SYMLINK arch/mn10300/include/asm/unit -> arch/mn10300/include/asm/unit-$(UNIT)'
 ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-mn10300
-	$(Q)ln -fsn $(srctree)/include/asm-mn10300/unit-$(UNIT) include/asm-mn10300/unit
+	$(Q)mkdir -p arch/mn10300/include/asm
+	$(Q)ln -fsn $(srctree)/arch/mn10300/include/asm/unit-$(UNIT) arch/mn10300/include/asm/unit
 else
-	$(Q)ln -fsn unit-$(UNIT) include/asm-mn10300/unit
+	$(Q)ln -fsn unit-$(UNIT) arch/mn10300/include/asm/unit
 endif
 	@touch $@
 
-CLEAN_FILES += include/asm-mn10300/unit include/asm-mn10300/.unit
+CLEAN_FILES += arch/mn10300/include/asm/unit arch/mn10300/include/asm/.unit
 
-prepare: include/asm-mn10300/.unit
+prepare: arch/mn10300/include/asm/.unit
diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild
new file mode 100644
index 0000000..c68e168
--- /dev/null
+++ b/arch/mn10300/include/asm/Kbuild
@@ -0,0 +1 @@
+include include/asm-generic/Kbuild.asm
diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h
new file mode 100644
index 0000000..bc06482
--- /dev/null
+++ b/arch/mn10300/include/asm/atomic.h
@@ -0,0 +1,157 @@
+/* MN10300 Atomic counter operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#ifdef __KERNEL__
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_read(v)	((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.  Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
+
+#include <asm/system.h>
+
+/**
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int temp;
+
+	local_irq_save(flags);
+	temp = v->counter;
+	temp += i;
+	v->counter = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+/**
+ * atomic_sub_return - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int temp;
+
+	local_irq_save(flags);
+	temp = v->counter;
+	temp -= i;
+	v->counter = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+	return atomic_add_return(i, v) < 0;
+}
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+	atomic_add_return(i, v);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	atomic_sub_return(i, v);
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+	atomic_add_return(1, v);
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+	atomic_sub_return(1, v);
+}
+
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+
+#define atomic_sub_and_test(i, v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
+
+#define atomic_add_unless(v, a, u)				\
+({								\
+	int c, old;						\
+	c = atomic_read(v);					\
+	while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+		c = old;					\
+	c != (u);						\
+})
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned long flags;
+
+	mask = ~mask;
+	local_irq_save(flags);
+	*addr &= mask;
+	local_irq_restore(flags);
+}
+
+#define atomic_xchg(ptr, v)		(xchg(&(ptr)->counter, (v)))
+#define atomic_cmpxchg(v, old, new)	(cmpxchg(&((v)->counter), (old), (new)))
+
+/* Atomic operations are already serializing on MN10300??? */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ATOMIC_H */
diff --git a/arch/mn10300/include/asm/auxvec.h b/arch/mn10300/include/asm/auxvec.h
new file mode 100644
index 0000000..4fdb60b
--- /dev/null
+++ b/arch/mn10300/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+
+#endif
diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h
new file mode 100644
index 0000000..0b610f4
--- /dev/null
+++ b/arch/mn10300/include/asm/bitops.h
@@ -0,0 +1,240 @@
+/* MN10300 bit operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+#ifndef __ASM_BITOPS_H
+#define __ASM_BITOPS_H
+
+#include <asm/cpu-regs.h>
+
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+/*
+ * set bit
+ */
+#define __set_bit(nr, addr)					\
+({								\
+	volatile unsigned char *_a = (unsigned char *)(addr);	\
+	const unsigned shift = (nr) & 7;			\
+	_a += (nr) >> 3;					\
+								\
+	asm volatile("bset %2,(%1) # set_bit reg"		\
+		     : "=m"(*_a)				\
+		     : "a"(_a), "d"(1 << shift),  "m"(*_a)	\
+		     : "memory", "cc");				\
+})
+
+#define set_bit(nr, addr) __set_bit((nr), (addr))
+
+/*
+ * clear bit
+ */
+#define ___clear_bit(nr, addr)					\
+({								\
+	volatile unsigned char *_a = (unsigned char *)(addr);	\
+	const unsigned shift = (nr) & 7;			\
+	_a += (nr) >> 3;					\
+								\
+	asm volatile("bclr %2,(%1) # clear_bit reg"		\
+		     : "=m"(*_a)				\
+		     : "a"(_a), "d"(1 << shift), "m"(*_a)	\
+		     : "memory", "cc");				\
+})
+
+#define clear_bit(nr, addr) ___clear_bit((nr), (addr))
+
+
+static inline void __clear_bit(int nr, volatile void *addr)
+{
+	unsigned int *a = (unsigned int *) addr;
+	int mask;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	*a &= ~mask;
+}
+
+/*
+ * test bit
+ */
+static inline int test_bit(int nr, const volatile void *addr)
+{
+	return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31));
+}
+
+/*
+ * change bit
+ */
+static inline void __change_bit(int nr, volatile void *addr)
+{
+	int	mask;
+	unsigned int *a = (unsigned int *) addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	*a ^= mask;
+}
+
+extern void change_bit(int nr, volatile void *addr);
+
+/*
+ * test and set bit
+ */
+#define __test_and_set_bit(nr,addr)				\
+({								\
+	volatile unsigned char *_a = (unsigned char *)(addr);	\
+	const unsigned shift = (nr) & 7;			\
+	unsigned epsw;						\
+	_a += (nr) >> 3;					\
+								\
+	asm volatile("bset %3,(%2) # test_set_bit reg\n"	\
+		     "mov epsw,%1"				\
+		     : "=m"(*_a), "=d"(epsw)			\
+		     : "a"(_a), "d"(1 << shift), "m"(*_a)	\
+		     : "memory", "cc");				\
+								\
+	!(epsw & EPSW_FLAG_Z);					\
+})
+
+#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr))
+
+/*
+ * test and clear bit
+ */
+#define __test_and_clear_bit(nr, addr)				\
+({								\
+        volatile unsigned char *_a = (unsigned char *)(addr);	\
+	const unsigned shift = (nr) & 7;			\
+	unsigned epsw;						\
+	_a += (nr) >> 3;					\
+								\
+	asm volatile("bclr %3,(%2) # test_clear_bit reg\n"	\
+		     "mov epsw,%1"				\
+		     : "=m"(*_a), "=d"(epsw)			\
+		     : "a"(_a), "d"(1 << shift), "m"(*_a)	\
+		     : "memory", "cc");				\
+								\
+	!(epsw & EPSW_FLAG_Z);					\
+})
+
+#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr))
+
+/*
+ * test and change bit
+ */
+static inline int __test_and_change_bit(int nr, volatile void *addr)
+{
+	int	mask, retval;
+	unsigned int *a = (unsigned int *)addr;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+
+	return retval;
+}
+
+extern int test_and_change_bit(int nr, volatile void *addr);
+
+#include <asm-generic/bitops/lock.h>
+
+#ifdef __KERNEL__
+
+/**
+ * __ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 31..0 to indicate bit 31..0 most least significant bit set
+ * - if no bits are set in x, the result is undefined
+ */
+static inline __attribute__((const))
+unsigned long __ffs(unsigned long x)
+{
+	int bit;
+	asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x));
+	return bit;
+}
+
+/*
+ * special slimline version of fls() for calculating ilog2_u32()
+ * - note: no protection against n == 0
+ */
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+	int bit;
+	asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n));
+	return bit;
+}
+
+/**
+ * fls - find last bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs:
+ * - return 32..1 to indicate bit 31..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int fls(int x)
+{
+	return (x != 0) ? __ilog2_u32(x) + 1 : 0;
+}
+
+/**
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+	return __ilog2_u32(word);
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 32..1 to indicate bit 31..0 most least significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int ffs(int x)
+{
+	/* Note: (x & -x) gives us a mask that is the least significant
+	 * (rightmost) 1-bit of the value in x.
+	 */
+	return fls(x & -x);
+}
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+	test_and_set_bit((nr) ^ 0x18, (addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+	test_and_clear_bit((nr) ^ 0x18, (addr))
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/minix-le.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_BITOPS_H */
diff --git a/arch/mn10300/include/asm/bug.h b/arch/mn10300/include/asm/bug.h
new file mode 100644
index 0000000..4fcf338
--- /dev/null
+++ b/arch/mn10300/include/asm/bug.h
@@ -0,0 +1,35 @@
+/* MN10300 Kernel bug reporting
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUG_H
+#define _ASM_BUG_H
+
+/*
+ * Tell the user there is some problem.
+ */
+#define _debug_bug_trap()					\
+do {								\
+	asm volatile(						\
+		"	syscall 15			\n"	\
+		"0:					\n"	\
+		"	.section __bug_table,\"a\"	\n"	\
+		"	.long 0b,%0,%1			\n"	\
+		"	.previous			\n"	\
+		:						\
+		: "i"(__FILE__), "i"(__LINE__)			\
+		);						\
+} while (0)
+
+#define BUG() _debug_bug_trap()
+
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_BUG_H */
diff --git a/arch/mn10300/include/asm/bugs.h b/arch/mn10300/include/asm/bugs.h
new file mode 100644
index 0000000..31c8bc5
--- /dev/null
+++ b/arch/mn10300/include/asm/bugs.h
@@ -0,0 +1,20 @@
+/* MN10300 Checks for architecture-dependent bugs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUGS_H
+#define _ASM_BUGS_H
+
+#include <asm/processor.h>
+
+static inline void __init check_bugs(void)
+{
+}
+
+#endif /* _ASM_BUGS_H */
diff --git a/arch/mn10300/include/asm/busctl-regs.h b/arch/mn10300/include/asm/busctl-regs.h
new file mode 100644
index 0000000..1632aef
--- /dev/null
+++ b/arch/mn10300/include/asm/busctl-regs.h
@@ -0,0 +1,151 @@
+/* AM33v2 on-board bus controller registers
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_BUSCTL_REGS_H
+#define _ASM_BUSCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* bus controller registers */
+#define BCCR			__SYSREG(0xc0002000, u32)	/* bus controller control reg */
+#define BCCR_B0AD		0x00000003	/* block 0 (80000000-83ffffff) bus allocation */
+#define BCCR_B1AD		0x0000000c	/* block 1 (84000000-87ffffff) bus allocation */
+#define BCCR_B2AD		0x00000030	/* block 2 (88000000-8bffffff) bus allocation */
+#define BCCR_B3AD		0x000000c0	/* block 3 (8c000000-8fffffff) bus allocation */
+#define BCCR_B4AD		0x00000300	/* block 4 (90000000-93ffffff) bus allocation */
+#define BCCR_B5AD		0x00000c00	/* block 5 (94000000-97ffffff) bus allocation */
+#define BCCR_B6AD		0x00003000	/* block 6 (98000000-9bffffff) bus allocation */
+#define BCCR_B7AD		0x0000c000	/* block 7 (9c000000-9fffffff) bus allocation */
+#define BCCR_BxAD_EXBUS		0x0		/* - direct to system bus controller */
+#define BCCR_BxAD_OPEXBUS	0x1		/* - direct to memory bus controller */
+#define BCCR_BxAD_OCMBUS	0x2		/* - direct to on chip memory */
+#define BCCR_API		0x00070000	/* bus arbitration priority */
+#define BCCR_API_DMACICD	0x00000000	/* - DMA > CI > CD */
+#define BCCR_API_DMACDCI	0x00010000	/* - DMA > CD > CI */
+#define BCCR_API_CICDDMA	0x00020000	/* - CI > CD > DMA */
+#define BCCR_API_CDCIDMA	0x00030000	/* - CD > CI > DMA */
+#define BCCR_API_ROUNDROBIN	0x00040000	/* - round robin */
+#define BCCR_BEPRI_DMACICD	0x00c00000	/* bus error address priority */
+#define BCCR_BEPRI_DMACDCI	0x00000000	/* - DMA > CI > CD */
+#define BCCR_BEPRI_CICDDMA	0x00400000	/* - DMA > CD > CI */
+#define BCCR_BEPRI_CDCIDMA	0x00800000	/* - CI > CD > DMA */
+#define BCCR_BEPRI		0x00c00000	/* - CD > CI > DMA */
+#define BCCR_TMON		0x03000000	/* timeout value settings */
+#define BCCR_TMON_16IOCLK	0x00000000	/* - 16 IOCLK cycles */
+#define BCCR_TMON_256IOCLK	0x01000000	/* - 256 IOCLK cycles */
+#define BCCR_TMON_4096IOCLK	0x02000000	/* - 4096 IOCLK cycles */
+#define BCCR_TMON_65536IOCLK	0x03000000	/* - 65536 IOCLK cycles */
+#define BCCR_TMOE		0x10000000	/* timeout detection enable */
+
+#define BCBERR			__SYSREG(0xc0002010, u32)	/* bus error source reg */
+#define BCBERR_BESB		0x0000001f	/* erroneous access destination space */
+#define BCBERR_BESB_MON		0x00000001	/* - monitor space */
+#define BCBERR_BESB_IO		0x00000002	/* - IO bus */
+#define BCBERR_BESB_EX		0x00000004	/* - EX bus */
+#define BCBERR_BESB_OPEX	0x00000008	/* - OpEX bus */
+#define BCBERR_BESB_OCM		0x00000010	/* - on chip memory */
+#define BCBERR_BERW		0x00000100	/* type of access */
+#define BCBERR_BERW_WRITE	0x00000000	/* - write */
+#define BCBERR_BERW_READ	0x00000100	/* - read */
+#define BCBERR_BESD		0x00000200	/* error detector */
+#define BCBERR_BESD_BCU		0x00000000	/* - BCU detected error */
+#define BCBERR_BESD_SLAVE_BUS	0x00000200	/* - slave bus detected error */
+#define BCBERR_BEBST		0x00000400	/* type of access */
+#define BCBERR_BEBST_SINGLE	0x00000000	/* - single */
+#define BCBERR_BEBST_BURST	0x00000400	/* - burst */
+#define BCBERR_BEME		0x00000800	/* multiple bus error flag */
+#define BCBERR_BEMR		0x00007000	/* master bus that caused the error */
+#define BCBERR_BEMR_NOERROR	0x00000000	/* - no error */
+#define BCBERR_BEMR_CI		0x00001000	/* - CPU instruction fetch bus caused error */
+#define BCBERR_BEMR_CD		0x00002000	/* - CPU data bus caused error */
+#define BCBERR_BEMR_DMA		0x00004000	/* - DMA bus caused error */
+
+#define BCBEAR			__SYSREGC(0xc0002020, u32)	/* bus error address reg */
+
+/* system bus controller registers */
+#define SBBASE(X)		__SYSREG(0xd8c00100 + (X) * 0x10, u32)	/* SBC base addr regs */
+#define SBBASE_BE		0x00000001	/* bank enable */
+#define SBBASE_BAM		0x0000fffe	/* bank address mask [31:17] */
+#define SBBASE_BBA		0xfffe0000	/* bank base address [31:17] */
+
+#define SBCNTRL0(X)		__SYSREG(0xd8c00200 + (X) * 0x10, u32)	/* SBC bank ctrl0 regs */
+#define SBCNTRL0_WEH		0x00000f00	/* write enable hold */
+#define SBCNTRL0_REH		0x0000f000	/* read enable hold */
+#define SBCNTRL0_RWH		0x000f0000	/* SRW signal hold */
+#define SBCNTRL0_CSH		0x00f00000	/* chip select hold */
+#define SBCNTRL0_DAH		0x0f000000	/* data hold */
+#define SBCNTRL0_ADH		0xf0000000	/* address hold */
+
+#define SBCNTRL1(X)		__SYSREG(0xd8c00204 + (X) * 0x10, u32)	/* SBC bank ctrl1 regs */
+#define SBCNTRL1_WED		0x00000f00	/* write enable delay */
+#define SBCNTRL1_RED		0x0000f000	/* read enable delay */
+#define SBCNTRL1_RWD		0x000f0000	/* SRW signal delay */
+#define SBCNTRL1_ASW		0x00f00000	/* address strobe width */
+#define SBCNTRL1_CSD		0x0f000000	/* chip select delay */
+#define SBCNTRL1_ASD		0xf0000000	/* address strobe delay */
+
+#define SBCNTRL2(X)		__SYSREG(0xd8c00208 + (X) * 0x10, u32)	/* SBC bank ctrl2 regs */
+#define SBCNTRL2_WC		0x000000ff	/* wait count */
+#define SBCNTRL2_BWC		0x00000f00	/* burst wait count */
+#define SBCNTRL2_WM		0x01000000	/* wait mode setting */
+#define SBCNTRL2_WM_FIXEDWAIT	0x00000000	/* - fixed wait access */
+#define SBCNTRL2_WM_HANDSHAKE	0x01000000	/* - handshake access */
+#define SBCNTRL2_BM		0x02000000	/* bus synchronisation mode */
+#define SBCNTRL2_BM_SYNC	0x00000000	/* - synchronous mode */
+#define SBCNTRL2_BM_ASYNC	0x02000000	/* - asynchronous mode */
+#define SBCNTRL2_BW		0x04000000	/* bus width */
+#define SBCNTRL2_BW_32		0x00000000	/* - 32 bits */
+#define SBCNTRL2_BW_16		0x04000000	/* - 16 bits */
+#define SBCNTRL2_RWINV		0x08000000	/* R/W signal invert polarity */
+#define SBCNTRL2_RWINV_NORM	0x00000000	/* - normal (read high) */
+#define SBCNTRL2_RWINV_INV	0x08000000	/* - inverted (read low) */
+#define SBCNTRL2_BT		0x70000000	/* bus type setting */
+#define SBCNTRL2_BT_SRAM	0x00000000	/* - SRAM interface */
+#define SBCNTRL2_BT_ADMUX	0x00000000	/* - addr/data multiplexed interface */
+#define SBCNTRL2_BT_BROM	0x00000000	/* - burst ROM interface */
+#define SBCNTRL2_BTSE		0x80000000	/* burst enable */
+
+/* memory bus controller */
+#define SDBASE(X)		__SYSREG(0xda000008 + (X) * 0x4, u32)	/* MBC base addr regs */
+#define SDBASE_CE		0x00000001	/* chip enable */
+#define SDBASE_CBAM		0x0000fff0	/* chip base address mask [31:20] */
+#define SDBASE_CBAM_SHIFT	16
+#define SDBASE_CBA		0xfff00000	/* chip base address [31:20] */
+
+#define SDRAMBUS		__SYSREG(0xda000000, u32)	/* bus mode control reg */
+#define SDRAMBUS_REFEN		0x00000004	/* refresh enable */
+#define SDRAMBUS_TRC		0x00000018	/* refresh command delay time */
+#define SDRAMBUS_BSTPT		0x00000020	/* burst stop command enable */
+#define SDRAMBUS_PONSEQ		0x00000040	/* power on sequence */
+#define SDRAMBUS_SELFREQ	0x00000080	/* self-refresh mode request */
+#define SDRAMBUS_SELFON		0x00000100	/* self-refresh mode on */
+#define SDRAMBUS_SIZE		0x00030000	/* SDRAM size */
+#define SDRAMBUS_SIZE_64Mbit	0x00010000	/* 64Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_128Mbit	0x00020000	/* 128Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_256Mbit	0x00030000	/* 256Mbit SDRAM (x16) */
+#define SDRAMBUS_TRASWAIT	0x000c0000	/* row address precharge command cycle number */
+#define SDRAMBUS_REFNUM		0x00300000	/* refresh command number */
+#define SDRAMBUS_BSTWAIT	0x00c00000	/* burst stop command cycle */
+#define SDRAMBUS_SETWAIT	0x03000000	/* mode register setting command cycle */
+#define SDRAMBUS_PREWAIT	0x0c000000	/* precharge command cycle */
+#define SDRAMBUS_RASLATE	0x30000000	/* RAS latency */
+#define SDRAMBUS_CASLATE	0xc0000000	/* CAS latency */
+
+#define SDREFCNT		__SYSREG(0xda000004, u32)	/* refresh period reg */
+#define SDREFCNT_PERI		0x00000fff	/* refresh period */
+
+#define SDSHDW			__SYSREG(0xda000010, u32)	/* test reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BUSCTL_REGS_H */
diff --git a/arch/mn10300/include/asm/byteorder.h b/arch/mn10300/include/asm/byteorder.h
new file mode 100644
index 0000000..5dd0bdd
--- /dev/null
+++ b/arch/mn10300/include/asm/byteorder.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
diff --git a/arch/mn10300/include/asm/cache.h b/arch/mn10300/include/asm/cache.h
new file mode 100644
index 0000000..9e01122
--- /dev/null
+++ b/arch/mn10300/include/asm/cache.h
@@ -0,0 +1,54 @@
+/* MN10300 cache management registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <asm/cpu-regs.h>
+#include <asm/proc/cache.h>
+
+#ifndef __ASSEMBLY__
+#define L1_CACHE_DISPARITY	(L1_CACHE_NENTRIES * L1_CACHE_BYTES)
+#else
+#define L1_CACHE_DISPARITY	L1_CACHE_NENTRIES * L1_CACHE_BYTES
+#endif
+
+/* data cache purge registers
+ * - read from the register to unconditionally purge that cache line
+ * - write address & 0xffffff00 to conditionally purge that cache line
+ *   - clear LSB to request invalidation as well
+ */
+#define DCACHE_PURGE(WAY, ENTRY) \
+	__SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \
+		 (ENTRY) * L1_CACHE_BYTES, u32)
+
+#define DCACHE_PURGE_WAY0(ENTRY) \
+	__SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY1(ENTRY) \
+	__SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY2(ENTRY) \
+	__SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY3(ENTRY) \
+	__SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+
+/* instruction cache access registers */
+#define ICACHE_DATA(WAY, ENTRY, OFF) \
+	__SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define ICACHE_TAG(WAY, ENTRY)	 \
+	__SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+/* instruction cache access registers */
+#define DCACHE_DATA(WAY, ENTRY, OFF) \
+	__SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define DCACHE_TAG(WAY, ENTRY)	 \
+	__SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+#endif /* _ASM_CACHE_H */
diff --git a/arch/mn10300/include/asm/cacheflush.h b/arch/mn10300/include/asm/cacheflush.h
new file mode 100644
index 0000000..2db746a
--- /dev/null
+++ b/arch/mn10300/include/asm/cacheflush.h
@@ -0,0 +1,116 @@
+/* MN10300 Cache flushing
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+#ifndef __ASSEMBLY__
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/*
+ * virtually-indexed cache managment (our cache is physically indexed)
+ */
+#define flush_cache_all()			do {} while (0)
+#define flush_cache_mm(mm)			do {} while (0)
+#define flush_cache_dup_mm(mm)			do {} while (0)
+#define flush_cache_range(mm, start, end)	do {} while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do {} while (0)
+#define flush_cache_vmap(start, end)		do {} while (0)
+#define flush_cache_vunmap(start, end)		do {} while (0)
+#define flush_dcache_page(page)			do {} while (0)
+#define flush_dcache_mmap_lock(mapping)		do {} while (0)
+#define flush_dcache_mmap_unlock(mapping)	do {} while (0)
+
+/*
+ * physically-indexed cache managment
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
+
+#else
+
+#define flush_icache_range(start, end)		do {} while (0)
+#define flush_icache_page(vma, pg)		do {} while (0)
+
+#endif
+
+#define flush_icache_user_range(vma, pg, adr, len) \
+	flush_icache_range(adr, adr + len)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {					\
+		memcpy(dst, src, len);		\
+		flush_icache_page(vma, page);	\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+/*
+ * primitive routines
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern void mn10300_icache_inv(void);
+extern void mn10300_dcache_inv(void);
+extern void mn10300_dcache_inv_page(unsigned start);
+extern void mn10300_dcache_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_inv_range2(unsigned start, unsigned size);
+#ifdef CONFIG_MN10300_CACHE_WBACK
+extern void mn10300_dcache_flush(void);
+extern void mn10300_dcache_flush_page(unsigned start);
+extern void mn10300_dcache_flush_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_range2(unsigned start, unsigned size);
+extern void mn10300_dcache_flush_inv(void);
+extern void mn10300_dcache_flush_inv_page(unsigned start);
+extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size);
+#else
+#define mn10300_dcache_flush()				do {} while (0)
+#define mn10300_dcache_flush_page(start)		do {} while (0)
+#define mn10300_dcache_flush_range(start, end)		do {} while (0)
+#define mn10300_dcache_flush_range2(start, size)	do {} while (0)
+#define mn10300_dcache_flush_inv()			mn10300_dcache_inv()
+#define mn10300_dcache_flush_inv_page(start) \
+	mn10300_dcache_inv_page((start))
+#define mn10300_dcache_flush_inv_range(start, end) \
+	mn10300_dcache_inv_range((start), (end))
+#define mn10300_dcache_flush_inv_range2(start, size) \
+	mn10300_dcache_inv_range2((start), (size))
+#endif /* CONFIG_MN10300_CACHE_WBACK */
+#else
+#define mn10300_icache_inv()				do {} while (0)
+#define mn10300_dcache_inv()				do {} while (0)
+#define mn10300_dcache_inv_page(start)			do {} while (0)
+#define mn10300_dcache_inv_range(start, end)		do {} while (0)
+#define mn10300_dcache_inv_range2(start, size)		do {} while (0)
+#define mn10300_dcache_flush()				do {} while (0)
+#define mn10300_dcache_flush_inv_page(start)		do {} while (0)
+#define mn10300_dcache_flush_inv()			do {} while (0)
+#define mn10300_dcache_flush_inv_range(start, end)	do {} while (0)
+#define mn10300_dcache_flush_inv_range2(start, size)	do {} while (0)
+#define mn10300_dcache_flush_page(start)		do {} while (0)
+#define mn10300_dcache_flush_range(start, end)		do {} while (0)
+#define mn10300_dcache_flush_range2(start, size)	do {} while (0)
+#endif /* CONFIG_MN10300_CACHE_DISABLED */
+
+/*
+ * internal debugging function
+ */
+#ifdef CONFIG_DEBUG_PAGEALLOC
+extern void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_CACHEFLUSH_H */
diff --git a/arch/mn10300/include/asm/checksum.h b/arch/mn10300/include/asm/checksum.h
new file mode 100644
index 0000000..9fb2a8d
--- /dev/null
+++ b/arch/mn10300/include/asm/checksum.h
@@ -0,0 +1,86 @@
+/* MN10300 Optimised checksumming code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+					int len, __wsum sum);
+extern __wsum csum_partial_copy_from_user(const void *src, void *dst,
+					  int len, __wsum sum,
+					  int *err_ptr);
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define csum_partial_copy_fromuser csum_partial_copy
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+				__wsum sum);
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	asm(
+		"	add	%1,%0		\n"
+		"	addc	0xffff,%0	\n"
+		: "=r" (sum)
+		: "r" (sum << 16), "0" (sum & 0xffff0000)
+		: "cc"
+	    );
+	return (~sum) >> 16;
+}
+
+static inline __wsum csum_tcpudp_nofold(unsigned long saddr,
+					unsigned long daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum)
+{
+	__wsum tmp;
+
+	tmp = (__wsum) ntohs(len) << 16;
+	tmp += (__wsum) proto << 8;
+
+	asm(
+		"	add	%1,%0		\n"
+		"	addc	%2,%0		\n"
+		"	addc	%3,%0		\n"
+		"	addc	0,%0		\n"
+		: "=r" (sum)
+		: "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum)
+		: "cc"
+	    );
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(unsigned long saddr,
+					unsigned long daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+#undef _HAVE_ARCH_IPV6_CSUM
+
+/*
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len,
+				    __wsum sum, int *err_ptr);
+
+
+#endif /* _ASM_CHECKSUM_H */
diff --git a/arch/mn10300/include/asm/cpu-regs.h b/arch/mn10300/include/asm/cpu-regs.h
new file mode 100644
index 0000000..757e9b5
--- /dev/null
+++ b/arch/mn10300/include/asm/cpu-regs.h
@@ -0,0 +1,290 @@
+/* MN10300 Core system registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CPU_REGS_H
+#define _ASM_CPU_REGS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+#ifdef CONFIG_MN10300_CPU_AM33V2
+/* we tell the compiler to pretend to be AM33 so that it doesn't try and use
+ * the FP regs, but tell the assembler that we're actually allowed AM33v2
+ * instructions */
+#ifndef __ASSEMBLY__
+asm(" .am33_2\n");
+#else
+.am33_2
+#endif
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR))
+#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR))
+#else
+#define __SYSREG(ADDR, TYPE) ADDR
+#define __SYSREGC(ADDR, TYPE) ADDR
+#endif
+
+/* CPU registers */
+#define EPSW_FLAG_Z		0x00000001	/* zero flag */
+#define EPSW_FLAG_N		0x00000002	/* negative flag */
+#define EPSW_FLAG_C		0x00000004	/* carry flag */
+#define EPSW_FLAG_V		0x00000008	/* overflow flag */
+#define EPSW_IM			0x00000700	/* interrupt mode */
+#define EPSW_IM_0		0x00000000	/* interrupt mode 0 */
+#define EPSW_IM_1		0x00000100	/* interrupt mode 1 */
+#define EPSW_IM_2		0x00000200	/* interrupt mode 2 */
+#define EPSW_IM_3		0x00000300	/* interrupt mode 3 */
+#define EPSW_IM_4		0x00000400	/* interrupt mode 4 */
+#define EPSW_IM_5		0x00000500	/* interrupt mode 5 */
+#define EPSW_IM_6		0x00000600	/* interrupt mode 6 */
+#define EPSW_IM_7		0x00000700	/* interrupt mode 7 */
+#define EPSW_IE			0x00000800	/* interrupt enable */
+#define EPSW_S			0x00003000	/* software auxilliary bits */
+#define EPSW_T			0x00008000	/* trace enable */
+#define EPSW_nSL		0x00010000	/* not supervisor level */
+#define EPSW_NMID		0x00020000	/* nonmaskable interrupt disable */
+#define EPSW_nAR		0x00040000	/* register bank control */
+#define EPSW_ML			0x00080000	/* monitor level */
+#define EPSW_FE			0x00100000	/* FPU enable */
+
+/* FPU registers */
+#define FPCR_EF_I		0x00000001	/* inexact result FPU exception flag */
+#define FPCR_EF_U		0x00000002	/* underflow FPU exception flag */
+#define FPCR_EF_O		0x00000004	/* overflow FPU exception flag */
+#define FPCR_EF_Z		0x00000008	/* zero divide FPU exception flag */
+#define FPCR_EF_V		0x00000010	/* invalid operand FPU exception flag */
+#define FPCR_EE_I		0x00000020	/* inexact result FPU exception enable */
+#define FPCR_EE_U		0x00000040	/* underflow FPU exception enable */
+#define FPCR_EE_O		0x00000080	/* overflow FPU exception enable */
+#define FPCR_EE_Z		0x00000100	/* zero divide FPU exception enable */
+#define FPCR_EE_V		0x00000200	/* invalid operand FPU exception enable */
+#define FPCR_EC_I		0x00000400	/* inexact result FPU exception cause */
+#define FPCR_EC_U		0x00000800	/* underflow FPU exception cause */
+#define FPCR_EC_O		0x00001000	/* overflow FPU exception cause */
+#define FPCR_EC_Z		0x00002000	/* zero divide FPU exception cause */
+#define FPCR_EC_V		0x00004000	/* invalid operand FPU exception cause */
+#define FPCR_RM			0x00030000	/* rounding mode */
+#define FPCR_RM_NEAREST		0x00000000	/* - round to nearest value */
+#define FPCR_FCC_U		0x00040000	/* FPU unordered condition code */
+#define FPCR_FCC_E		0x00080000	/* FPU equal condition code */
+#define FPCR_FCC_G		0x00100000	/* FPU greater than condition code */
+#define FPCR_FCC_L		0x00200000	/* FPU less than condition code */
+#define FPCR_INIT		0x00000000	/* no exceptions, rounding to nearest */
+
+/* CPU control registers */
+#define CPUP			__SYSREG(0xc0000020, u16)	/* CPU pipeline register */
+#define CPUP_DWBD		0x0020		/* write buffer disable flag */
+#define CPUP_IPFD		0x0040		/* instruction prefetch disable flag */
+#define CPUP_EXM		0x0080		/* exception operation mode */
+#define CPUP_EXM_AM33V1		0x0000		/* - AM33 v1 exception mode */
+#define CPUP_EXM_AM33V2		0x0080		/* - AM33 v2 exception mode */
+
+#define CPUM			__SYSREG(0xc0000040, u16)	/* CPU mode register */
+#define CPUM_SLEEP		0x0004		/* set to enter sleep state */
+#define CPUM_HALT		0x0008		/* set to enter halt state */
+#define CPUM_STOP		0x0010		/* set to enter stop state */
+
+#define CPUREV			__SYSREGC(0xc0000050, u32)	/* CPU revision register */
+#define CPUREV_TYPE		0x0000000f	/* CPU type */
+#define CPUREV_TYPE_S		0
+#define CPUREV_TYPE_AM33V1	0x00000000	/* - AM33 V1 core, AM33/1.00 arch */
+#define CPUREV_TYPE_AM33V2	0x00000001	/* - AM33 V2 core, AM33/2.00 arch */
+#define CPUREV_TYPE_AM34V1	0x00000002	/* - AM34 V1 core, AM33/2.00 arch */
+#define CPUREV_REVISION		0x000000f0	/* CPU revision */
+#define CPUREV_REVISION_S	4
+#define CPUREV_ICWAY		0x00000f00	/* number of instruction cache ways */
+#define CPUREV_ICWAY_S		8
+#define CPUREV_ICSIZE		0x0000f000	/* instruction cache way size */
+#define CPUREV_ICSIZE_S		12
+#define CPUREV_DCWAY		0x000f0000	/* number of data cache ways */
+#define CPUREV_DCWAY_S		16
+#define CPUREV_DCSIZE		0x00f00000	/* data cache way size */
+#define CPUREV_DCSIZE_S		20
+#define CPUREV_FPUTYPE		0x0f000000	/* FPU core type */
+#define CPUREV_FPUTYPE_NONE	0x00000000	/* - no FPU core implemented */
+#define CPUREV_OCDCTG		0xf0000000	/* on-chip debug function category */
+
+#define DCR			__SYSREG(0xc0000030, u16)	/* Debug control register */
+
+/* interrupt/exception control registers */
+#define IVAR0			__SYSREG(0xc0000000, u16)	/* interrupt vector 0 */
+#define IVAR1			__SYSREG(0xc0000004, u16)	/* interrupt vector 1 */
+#define IVAR2			__SYSREG(0xc0000008, u16)	/* interrupt vector 2 */
+#define IVAR3			__SYSREG(0xc000000c, u16)	/* interrupt vector 3 */
+#define IVAR4			__SYSREG(0xc0000010, u16)	/* interrupt vector 4 */
+#define IVAR5			__SYSREG(0xc0000014, u16)	/* interrupt vector 5 */
+#define IVAR6			__SYSREG(0xc0000018, u16)	/* interrupt vector 6 */
+
+#define TBR			__SYSREG(0xc0000024, u32)	/* Trap table base */
+#define TBR_TB			0xff000000	/* table base address bits 31-24 */
+#define TBR_INT_CODE		0x00ffffff	/* interrupt code */
+
+#define DEAR			__SYSREG(0xc0000038, u32)	/* Data access exception address */
+
+#define sISR			__SYSREG(0xc0000044, u32)	/* Supervisor interrupt status */
+#define	sISR_IRQICE		0x00000001	/* ICE interrupt */
+#define	sISR_ISTEP		0x00000002	/* single step interrupt */
+#define	sISR_MISSA		0x00000004	/* memory access address misalignment fault */
+#define	sISR_UNIMP		0x00000008	/* unimplemented instruction execution fault */
+#define	sISR_PIEXE		0x00000010	/* program interrupt */
+#define	sISR_MEMERR		0x00000020	/* illegal memory access fault */
+#define	sISR_IBREAK		0x00000040	/* instraction break interrupt */
+#define	sISR_DBSRL		0x00000080	/* debug serial interrupt */
+#define	sISR_PERIDB		0x00000100	/* peripheral debug interrupt */
+#define	sISR_EXUNIMP		0x00000200	/* unimplemented ex-instruction execution fault */
+#define	sISR_OBREAK		0x00000400	/* operand break interrupt */
+#define	sISR_PRIV		0x00000800	/* privileged instruction execution fault */
+#define	sISR_BUSERR		0x00001000	/* bus error fault */
+#define	sISR_DBLFT		0x00002000	/* double fault */
+#define	sISR_DBG		0x00008000	/* debug reserved interrupt */
+#define sISR_ITMISS		0x00010000	/* instruction TLB miss */
+#define sISR_DTMISS		0x00020000	/* data TLB miss */
+#define sISR_ITEX		0x00040000	/* instruction TLB access exception */
+#define sISR_DTEX		0x00080000	/* data TLB access exception */
+#define sISR_ILGIA		0x00100000	/* illegal instruction access exception */
+#define sISR_ILGDA		0x00200000	/* illegal data access exception */
+#define sISR_IOIA		0x00400000	/* internal I/O space instruction access excep */
+#define sISR_PRIVA		0x00800000	/* privileged space instruction access excep */
+#define sISR_PRIDA		0x01000000	/* privileged space data access excep */
+#define sISR_DISA		0x02000000	/* data space instruction access excep */
+#define sISR_SYSC		0x04000000	/* system call instruction excep */
+#define sISR_FPUD		0x08000000	/* FPU disabled excep */
+#define sISR_FPUUI		0x10000000	/* FPU unimplemented instruction excep */
+#define sISR_FPUOP		0x20000000	/* FPU operation excep */
+#define sISR_NE			0x80000000	/* multiple synchronous exceptions excep */
+
+/* cache control registers */
+#define CHCTR			__SYSREG(0xc0000070, u16)	/* cache control */
+#define CHCTR_ICEN		0x0001		/* instruction cache enable */
+#define CHCTR_DCEN		0x0002		/* data cache enable */
+#define CHCTR_ICBUSY		0x0004		/* instruction cache busy */
+#define CHCTR_DCBUSY		0x0008		/* data cache busy */
+#define CHCTR_ICINV		0x0010		/* instruction cache invalidate */
+#define CHCTR_DCINV		0x0020		/* data cache invalidate */
+#define CHCTR_DCWTMD		0x0040		/* data cache writing mode */
+#define CHCTR_DCWTMD_WRBACK	0x0000		/* - write back mode */
+#define CHCTR_DCWTMD_WRTHROUGH	0x0040		/* - write through mode */
+#define CHCTR_DCALMD		0x0080		/* data cache allocation mode */
+#define CHCTR_ICWMD		0x0f00		/* instruction cache way mode */
+#define CHCTR_DCWMD		0xf000		/* data cache way mode */
+
+/* MMU control registers */
+#define MMUCTR			__SYSREG(0xc0000090, u32)	/* MMU control register */
+#define MMUCTR_IRP		0x0000003f	/* instruction TLB replace pointer */
+#define MMUCTR_ITE		0x00000040	/* instruction TLB enable */
+#define MMUCTR_IIV		0x00000080	/* instruction TLB invalidate */
+#define MMUCTR_ITL		0x00000700	/* instruction TLB lock pointer */
+#define MMUCTR_ITL_NOLOCK	0x00000000	/* - no lock */
+#define MMUCTR_ITL_LOCK0	0x00000100	/* - entry 0 locked */
+#define MMUCTR_ITL_LOCK0_1	0x00000200	/* - entry 0-1 locked */
+#define MMUCTR_ITL_LOCK0_3	0x00000300	/* - entry 0-3 locked */
+#define MMUCTR_ITL_LOCK0_7	0x00000400	/* - entry 0-7 locked */
+#define MMUCTR_ITL_LOCK0_15	0x00000500	/* - entry 0-15 locked */
+#define MMUCTR_CE		0x00008000	/* cacheable bit enable */
+#define MMUCTR_DRP		0x003f0000	/* data TLB replace pointer */
+#define MMUCTR_DTE		0x00400000	/* data TLB enable */
+#define MMUCTR_DIV		0x00800000	/* data TLB invalidate */
+#define MMUCTR_DTL		0x07000000	/* data TLB lock pointer */
+#define MMUCTR_DTL_NOLOCK	0x00000000	/* - no lock */
+#define MMUCTR_DTL_LOCK0	0x01000000	/* - entry 0 locked */
+#define MMUCTR_DTL_LOCK0_1	0x02000000	/* - entry 0-1 locked */
+#define MMUCTR_DTL_LOCK0_3	0x03000000	/* - entry 0-3 locked */
+#define MMUCTR_DTL_LOCK0_7	0x04000000	/* - entry 0-7 locked */
+#define MMUCTR_DTL_LOCK0_15	0x05000000	/* - entry 0-15 locked */
+
+#define PIDR			__SYSREG(0xc0000094, u16)	/* PID register */
+#define PIDR_PID		0x00ff		/* process identifier */
+
+#define PTBR			__SYSREG(0xc0000098, unsigned long) /* Page table base register */
+
+#define IPTEL			__SYSREG(0xc00000a0, u32)	/* instruction TLB entry */
+#define DPTEL			__SYSREG(0xc00000b0, u32)	/* data TLB entry */
+#define xPTEL_V			0x00000001	/* TLB entry valid */
+#define xPTEL_UNUSED1		0x00000002	/* unused bit */
+#define xPTEL_UNUSED2		0x00000004	/* unused bit */
+#define xPTEL_C			0x00000008	/* cached if set */
+#define xPTEL_PV		0x00000010	/* page valid */
+#define xPTEL_D			0x00000020	/* dirty */
+#define xPTEL_PR		0x000001c0	/* page protection */
+#define xPTEL_PR_ROK		0x00000000	/* - R/O kernel */
+#define xPTEL_PR_RWK		0x00000100	/* - R/W kernel */
+#define xPTEL_PR_ROK_ROU	0x00000080	/* - R/O kernel and R/O user */
+#define xPTEL_PR_RWK_ROU	0x00000180	/* - R/W kernel and R/O user */
+#define xPTEL_PR_RWK_RWU	0x000001c0	/* - R/W kernel and R/W user */
+#define xPTEL_G			0x00000200	/* global (use PID if 0) */
+#define xPTEL_PS		0x00000c00	/* page size */
+#define xPTEL_PS_4Kb		0x00000000	/* - 4Kb page */
+#define xPTEL_PS_128Kb		0x00000400	/* - 128Kb page */
+#define xPTEL_PS_1Kb		0x00000800	/* - 1Kb page */
+#define xPTEL_PS_4Mb		0x00000c00	/* - 4Mb page */
+#define xPTEL_PPN		0xfffff006	/* physical page number */
+
+#define xPTEL_V_BIT		0	/* bit numbers corresponding to above masks */
+#define xPTEL_UNUSED1_BIT	1
+#define xPTEL_UNUSED2_BIT	2
+#define xPTEL_C_BIT		3
+#define xPTEL_PV_BIT		4
+#define xPTEL_D_BIT		5
+#define xPTEL_G_BIT		9
+
+#define IPTEU			__SYSREG(0xc00000a4, u32)	/* instruction TLB virtual addr */
+#define DPTEU			__SYSREG(0xc00000b4, u32)	/* data TLB virtual addr */
+#define xPTEU_VPN		0xfffffc00	/* virtual page number */
+#define xPTEU_PID		0x000000ff	/* process identifier to which applicable */
+
+#define IPTEL2			__SYSREG(0xc00000a8, u32)	/* instruction TLB entry */
+#define DPTEL2			__SYSREG(0xc00000b8, u32)	/* data TLB entry */
+#define xPTEL2_V		0x00000001	/* TLB entry valid */
+#define xPTEL2_C		0x00000002	/* cacheable */
+#define xPTEL2_PV		0x00000004	/* page valid */
+#define xPTEL2_D		0x00000008	/* dirty */
+#define xPTEL2_PR		0x00000070	/* page protection */
+#define xPTEL2_PR_ROK		0x00000000	/* - R/O kernel */
+#define xPTEL2_PR_RWK		0x00000040	/* - R/W kernel */
+#define xPTEL2_PR_ROK_ROU	0x00000020	/* - R/O kernel and R/O user */
+#define xPTEL2_PR_RWK_ROU	0x00000060	/* - R/W kernel and R/O user */
+#define xPTEL2_PR_RWK_RWU	0x00000070	/* - R/W kernel and R/W user */
+#define xPTEL2_G		0x00000080	/* global (use PID if 0) */
+#define xPTEL2_PS		0x00000300	/* page size */
+#define xPTEL2_PS_4Kb		0x00000000	/* - 4Kb page */
+#define xPTEL2_PS_128Kb		0x00000100	/* - 128Kb page */
+#define xPTEL2_PS_1Kb		0x00000200	/* - 1Kb page */
+#define xPTEL2_PS_4Mb		0x00000300	/* - 4Mb page */
+#define xPTEL2_PPN		0xfffffc00	/* physical page number */
+
+#define MMUFCR			__SYSREGC(0xc000009c, u32)	/* MMU exception cause */
+#define MMUFCR_IFC		__SYSREGC(0xc000009c, u16)	/* MMU instruction excep cause */
+#define MMUFCR_DFC		__SYSREGC(0xc000009e, u16)	/* MMU data exception cause */
+#define MMUFCR_xFC_TLBMISS	0x0001		/* TLB miss flag */
+#define MMUFCR_xFC_INITWR	0x0002		/* initial write excep flag */
+#define MMUFCR_xFC_PGINVAL	0x0004		/* page invalid excep flag */
+#define MMUFCR_xFC_PROTVIOL	0x0008		/* protection violation excep flag */
+#define MMUFCR_xFC_ACCESS	0x0010		/* access level flag */
+#define MMUFCR_xFC_ACCESS_USR	0x0000		/* - user mode */
+#define MMUFCR_xFC_ACCESS_SR	0x0010		/* - supervisor mode */
+#define MMUFCR_xFC_TYPE		0x0020		/* access type flag */
+#define MMUFCR_xFC_TYPE_READ	0x0000		/* - read */
+#define MMUFCR_xFC_TYPE_WRITE	0x0020		/* - write */
+#define MMUFCR_xFC_PR		0x01c0		/* page protection flag */
+#define MMUFCR_xFC_PR_ROK	0x0000		/* - R/O kernel */
+#define MMUFCR_xFC_PR_RWK	0x0100		/* - R/W kernel */
+#define MMUFCR_xFC_PR_ROK_ROU	0x0080		/* - R/O kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_ROU	0x0180		/* - R/W kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_RWU	0x01c0		/* - R/W kernel and R/W user */
+#define MMUFCR_xFC_ILLADDR	0x0200		/* illegal address excep flag */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_CPU_REGS_H */
diff --git a/arch/mn10300/include/asm/cputime.h b/arch/mn10300/include/asm/cputime.h
new file mode 100644
index 0000000..6d68ad7
--- /dev/null
+++ b/arch/mn10300/include/asm/cputime.h
@@ -0,0 +1 @@
+#include <asm-generic/cputime.h>
diff --git a/arch/mn10300/include/asm/current.h b/arch/mn10300/include/asm/current.h
new file mode 100644
index 0000000..ca6027d
--- /dev/null
+++ b/arch/mn10300/include/asm/current.h
@@ -0,0 +1,37 @@
+/* MN10300 Current task structure accessor
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+/*
+ * dedicate E2 to keeping the current task pointer
+ */
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+
+register struct task_struct *const current asm("e2") __attribute__((used));
+
+#define get_current() current
+
+extern struct task_struct *__current;
+
+#else
+static inline __attribute__((const))
+struct task_struct *get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current get_current()
+#endif
+
+#endif /* _ASM_CURRENT_H */
diff --git a/arch/mn10300/include/asm/delay.h b/arch/mn10300/include/asm/delay.h
new file mode 100644
index 0000000..34517b3
--- /dev/null
+++ b/arch/mn10300/include/asm/delay.h
@@ -0,0 +1,19 @@
+/* MN10300 Uninterruptible delay routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) __udelay(n)
+
+#endif /* _ASM_DELAY_H */
diff --git a/arch/mn10300/include/asm/device.h b/arch/mn10300/include/asm/device.h
new file mode 100644
index 0000000..f0a4c25
--- /dev/null
+++ b/arch/mn10300/include/asm/device.h
@@ -0,0 +1 @@
+#include <asm-generic/device.h>
diff --git a/arch/mn10300/include/asm/div64.h b/arch/mn10300/include/asm/div64.h
new file mode 100644
index 0000000..3a8329b
--- /dev/null
+++ b/arch/mn10300/include/asm/div64.h
@@ -0,0 +1,100 @@
+/* MN10300 64-bit division
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DIV64
+#define _ASM_DIV64
+
+#include <linux/types.h>
+
+extern void ____unhandled_size_in_do_div___(void);
+
+/*
+ * divide n by base, leaving the result in n and returning the remainder
+ * - we can do this quite efficiently on the MN10300 by cascading the divides
+ *   through the MDR register
+ */
+#define do_div(n, base)							\
+({									\
+	unsigned __rem = 0;						\
+	if (sizeof(n) <= 4) {						\
+		asm("mov	%1,mdr	\n"				\
+		    "divu	%2,%0	\n"				\
+		    "mov	mdr,%1	\n"				\
+		    : "+r"(n), "=d"(__rem)				\
+		    : "r"(base), "1"(__rem)				\
+		    : "cc"						\
+		    );							\
+	} else if (sizeof(n) <= 8) {					\
+		union {							\
+			unsigned long long l;				\
+			u32 w[2];					\
+		} __quot;						\
+		__quot.l = n;						\
+		asm("mov	%0,mdr	\n"	/* MDR = 0 */		\
+		    "divu	%3,%1	\n"				\
+		    /* __quot.MSL = __div.MSL / base, */		\
+		    /* MDR = MDR:__div.MSL % base */			\
+		    "divu	%3,%2	\n"				\
+		    /* __quot.LSL = MDR:__div.LSL / base, */		\
+		    /* MDR = MDR:__div.LSL % base */			\
+		    "mov	mdr,%0	\n"				\
+		    : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0])	\
+		    : "r"(base), "0"(__rem), "1"(__quot.w[1]),		\
+		      "2"(__quot.w[0])					\
+		    : "cc"						\
+		    );							\
+		n = __quot.l;						\
+	} else {							\
+		____unhandled_size_in_do_div___();			\
+	}								\
+	__rem;								\
+})
+
+/*
+ * do an unsigned 32-bit multiply and divide with intermediate 64-bit product
+ * so as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div)
+{
+	unsigned result;
+
+	asm("mulu	%2,%0	\n"	/* MDR:val = val*mult */
+	    "divu	%3,%0	\n"	/* val = MDR:val/div;
+					 * MDR = MDR:val%div */
+	    : "=r"(result)
+	    : "0"(val), "ir"(mult), "r"(div)
+	    );
+
+	return result;
+}
+
+/*
+ * do a signed 32-bit multiply and divide with intermediate 64-bit product so
+ * as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+signed __muldiv64s(signed val, signed mult, signed div)
+{
+	signed result;
+
+	asm("mul	%2,%0	\n"	/* MDR:val = val*mult */
+	    "div	%3,%0	\n"	/* val = MDR:val/div;
+					 * MDR = MDR:val%div */
+	    : "=r"(result)
+	    : "0"(val), "ir"(mult), "r"(div)
+	    );
+
+	return result;
+}
+
+#endif /* _ASM_DIV64 */
diff --git a/arch/mn10300/include/asm/dma-mapping.h b/arch/mn10300/include/asm/dma-mapping.h
new file mode 100644
index 0000000..ccae8f6
--- /dev/null
+++ b/arch/mn10300/include/asm/dma-mapping.h
@@ -0,0 +1,234 @@
+/* DMA mapping routines for the MN10300 arch
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cache.h>
+#include <asm/io.h>
+
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, int flag);
+
+extern void dma_free_coherent(struct device *dev, size_t size,
+			      void *vaddr, dma_addr_t dma_handle);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
+#define dma_free_noncoherent(d, s, v, h)  dma_free_coherent((d), (s), (v), (h))
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode.  The
+ * 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory until
+ * either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+static inline
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+			  enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	mn10300_dcache_flush_inv();
+	return virt_to_bus(ptr);
+}
+
+/*
+ * Unmap a single streaming mode DMA translation.  The dma_addr and size must
+ * match what was provided for in a previous pci_map_single call.  All other
+ * usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		      enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * This is the scather-gather version of the above pci_map_single interface.
+ * Here the scatter gather list elements are each tagged with the appropriate
+ * dma address and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of DMA
+ *       address/length pairs than there are SG table elements.  (for example
+ *       via virtual mapping capabilities) The routine returns the number of
+ *       addr/length pairs actually used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are the same
+ * here.
+ */
+static inline
+int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
+	       enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(!valid_dma_direction(direction));
+	WARN_ON(nents == 0 || sglist[0].length == 0);
+
+	for_each_sg(sglist, sg, nents, i) {
+		BUG_ON(!sg_page(sg));
+
+		sg->dma_address = sg_phys(sg);
+	}
+
+	mn10300_dcache_flush_inv();
+	return nents;
+}
+
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+		  enum dma_data_direction direction)
+{
+	BUG_ON(!valid_dma_direction(direction));
+}
+
+/*
+ * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
+ * to pci_map_single, but takes a struct page instead of a virtual address
+ */
+static inline
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+			unsigned long offset, size_t size,
+			enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	return page_to_bus(page) + offset;
+}
+
+static inline
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+		    enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Make physical memory consistent for a single streaming mode DMA translation
+ * after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the buffer using
+ * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
+ * function before doing so.  At the next point you give the PCI dma address
+ * back to the card, the device again owns the buffer.
+ */
+static inline
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			     size_t size, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+				size_t size, enum dma_data_direction direction)
+{
+	mn10300_dcache_flush_inv();
+}
+
+static inline
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+				   unsigned long offset, size_t size,
+				   enum dma_data_direction direction)
+{
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction direction)
+{
+	mn10300_dcache_flush_inv();
+}
+
+
+/*
+ * Make physical memory consistent for a set of streaming mode DMA translations
+ * after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list, same rules
+ * and usage.
+ */
+static inline
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+			 int nelems, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+			    int nelems, enum dma_data_direction direction)
+{
+	mn10300_dcache_flush_inv();
+}
+
+static inline
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return 0;
+}
+
+/*
+ * Return whether the given PCI device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits during
+ * PCI bus mastering, then you would pass 0x00ffffff as the mask to this
+ * function.
+ */
+static inline
+int dma_supported(struct device *dev, u64 mask)
+{
+	/*
+	 * we fall back to GFP_DMA when the mask isn't all 1s, so we can't
+	 * guarantee allocations that must be within a tighter range than
+	 * GFP_DMA
+	 */
+	if (mask < 0x00ffffff)
+		return 0;
+	return 1;
+}
+
+static inline
+int dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+	return 0;
+}
+
+static inline
+int dma_get_cache_alignment(void)
+{
+	return 1 << L1_CACHE_SHIFT;
+}
+
+#define dma_is_consistent(d)	(1)
+
+static inline
+void dma_cache_sync(void *vaddr, size_t size,
+		    enum dma_data_direction direction)
+{
+	mn10300_dcache_flush_inv();
+}
+
+#endif
diff --git a/arch/mn10300/include/asm/dma.h b/arch/mn10300/include/asm/dma.h
new file mode 100644
index 0000000..098df2e
--- /dev/null
+++ b/arch/mn10300/include/asm/dma.h
@@ -0,0 +1,118 @@
+/* MN10300 ISA DMA handlers and definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/system.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#undef MAX_DMA_CHANNELS		/* switch off linux/kernel/dma.c */
+#define MAX_DMA_ADDRESS		0xbfffffff
+
+extern spinlock_t dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static inline void enable_dma(unsigned int dmanr)
+{
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+	return 0;
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* _ASM_DMA_H */
diff --git a/arch/mn10300/include/asm/dmactl-regs.h b/arch/mn10300/include/asm/dmactl-regs.h
new file mode 100644
index 0000000..58a199d
--- /dev/null
+++ b/arch/mn10300/include/asm/dmactl-regs.h
@@ -0,0 +1,101 @@
+/* MN10300 on-board DMA controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMACTL_REGS_H
+#define _ASM_DMACTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* DMA registers */
+#define	DMxCTR(N)		__SYSREG(0xd2000000 + ((N) * 0x100), u32)	/* control reg */
+#define	DMxCTR_BG		0x0000001f	/* transfer request source */
+#define	DMxCTR_BG_SOFT		0x00000000	/* - software source */
+#define	DMxCTR_BG_SC0TX		0x00000002	/* - serial port 0 transmission */
+#define	DMxCTR_BG_SC0RX		0x00000003	/* - serial port 0 reception */
+#define	DMxCTR_BG_SC1TX		0x00000004	/* - serial port 1 transmission */
+#define	DMxCTR_BG_SC1RX		0x00000005	/* - serial port 1 reception */
+#define	DMxCTR_BG_SC2TX		0x00000006	/* - serial port 2 transmission */
+#define	DMxCTR_BG_SC2RX		0x00000007	/* - serial port 2 reception */
+#define	DMxCTR_BG_TM0UFLOW	0x00000008	/* - timer 0 underflow */
+#define	DMxCTR_BG_TM1UFLOW	0x00000009	/* - timer 1 underflow */
+#define	DMxCTR_BG_TM2UFLOW	0x0000000a	/* - timer 2 underflow */
+#define	DMxCTR_BG_TM3UFLOW	0x0000000b	/* - timer 3 underflow */
+#define	DMxCTR_BG_TM6ACMPCAP	0x0000000c	/* - timer 6A compare/capture */
+#define	DMxCTR_BG_AFE		0x0000000d	/* - analogue front-end interrupt source */
+#define	DMxCTR_BG_ADC		0x0000000e	/* - A/D conversion end interrupt source */
+#define	DMxCTR_BG_IRDA		0x0000000f	/* - IrDA interrupt source */
+#define	DMxCTR_BG_RTC		0x00000010	/* - RTC interrupt source */
+#define	DMxCTR_BG_XIRQ0		0x00000011	/* - XIRQ0 pin interrupt source */
+#define	DMxCTR_BG_XIRQ1		0x00000012	/* - XIRQ1 pin interrupt source */
+#define	DMxCTR_BG_XDMR0		0x00000013	/* - external request 0 source (XDMR0 pin) */
+#define	DMxCTR_BG_XDMR1		0x00000014	/* - external request 1 source (XDMR1 pin) */
+#define	DMxCTR_SAM		0x000000e0	/* DMA transfer src addr mode */
+#define	DMxCTR_SAM_INCR		0x00000000	/* - increment */
+#define	DMxCTR_SAM_DECR		0x00000020	/* - decrement */
+#define	DMxCTR_SAM_FIXED	0x00000040	/* - fixed */
+#define	DMxCTR_DAM		0x00000000	/* DMA transfer dest addr mode */
+#define	DMxCTR_DAM_INCR		0x00000000	/* - increment */
+#define	DMxCTR_DAM_DECR		0x00000100	/* - decrement */
+#define	DMxCTR_DAM_FIXED	0x00000200	/* - fixed */
+#define	DMxCTR_TM		0x00001800	/* DMA transfer mode */
+#define	DMxCTR_TM_BATCH		0x00000000	/* - batch transfer */
+#define	DMxCTR_TM_INTERM	0x00001000	/* - intermittent transfer */
+#define	DMxCTR_UT		0x00006000	/* DMA transfer unit */
+#define	DMxCTR_UT_1		0x00000000	/* - 1 byte */
+#define	DMxCTR_UT_2		0x00002000	/* - 2 byte */
+#define	DMxCTR_UT_4		0x00004000	/* - 4 byte */
+#define	DMxCTR_UT_16		0x00006000	/* - 16 byte */
+#define	DMxCTR_TEN		0x00010000	/* DMA channel transfer enable */
+#define	DMxCTR_RQM		0x00060000	/* external request input source mode */
+#define	DMxCTR_RQM_FALLEDGE	0x00000000	/* - falling edge */
+#define	DMxCTR_RQM_RISEEDGE	0x00020000	/* - rising edge */
+#define	DMxCTR_RQM_LOLEVEL	0x00040000	/* - low level */
+#define	DMxCTR_RQM_HILEVEL	0x00060000	/* - high level */
+#define	DMxCTR_RQF		0x01000000	/* DMA transfer request flag */
+#define	DMxCTR_XEND		0x80000000	/* DMA transfer end flag */
+
+#define	DMxSRC(N)		__SYSREG(0xd2000004 + ((N) * 0x100), u32)	/* control reg */
+
+#define	DMxDST(N)		__SYSREG(0xd2000008 + ((N) * 0x100), u32)	/* src addr reg */
+
+#define	DMxSIZ(N)		__SYSREG(0xd200000c + ((N) * 0x100), u32)	/* dest addr reg */
+#define DMxSIZ_CT		0x000fffff	/* number of bytes to transfer */
+
+#define	DMxCYC(N)		__SYSREG(0xd2000010 + ((N) * 0x100), u32)	/* intermittent
+										 * size reg */
+#define DMxCYC_CYC		0x000000ff	/* number of interrmittent transfers -1 */
+
+#define DM0IRQ			16		/* DMA channel 0 complete IRQ */
+#define DM1IRQ			17		/* DMA channel 1 complete IRQ */
+#define DM2IRQ			18		/* DMA channel 2 complete IRQ */
+#define DM3IRQ			19		/* DMA channel 3 complete IRQ */
+
+#define	DM0ICR			GxICR(DM0IRQ)	/* DMA channel 0 complete intr ctrl reg */
+#define	DM1ICR			GxICR(DM0IR1)	/* DMA channel 1 complete intr ctrl reg */
+#define	DM2ICR			GxICR(DM0IR2)	/* DMA channel 2 complete intr ctrl reg */
+#define	DM3ICR			GxICR(DM0IR3)	/* DMA channel 3 complete intr ctrl reg */
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_dmactl_regs {
+	u32		ctr;
+	const void	*src;
+	void		*dst;
+	u32		siz;
+	u32		cyc;
+} __attribute__((aligned(0x100)));
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_DMACTL_REGS_H */
diff --git a/arch/mn10300/include/asm/elf.h b/arch/mn10300/include/asm/elf.h
new file mode 100644
index 0000000..bf09f8b
--- /dev/null
+++ b/arch/mn10300/include/asm/elf.h
@@ -0,0 +1,147 @@
+/* MN10300 ELF constant and register definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ELF_H
+#define _ASM_ELF_H
+
+#include <linux/utsname.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * AM33 relocations
+ */
+#define R_MN10300_NONE		0	/* No reloc.  */
+#define R_MN10300_32		1	/* Direct 32 bit.  */
+#define R_MN10300_16		2	/* Direct 16 bit.  */
+#define R_MN10300_8		3	/* Direct 8 bit.  */
+#define R_MN10300_PCREL32	4	/* PC-relative 32-bit.  */
+#define R_MN10300_PCREL16	5	/* PC-relative 16-bit signed.  */
+#define R_MN10300_PCREL8	6	/* PC-relative 8-bit signed.  */
+#define R_MN10300_24		9	/* Direct 24 bit.  */
+#define R_MN10300_RELATIVE	23	/* Adjust by program base.  */
+
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define ELF_NFPREG 32
+typedef float elf_fpreg_t;
+
+typedef struct {
+	elf_fpreg_t	fpregs[ELF_NFPREG];
+	u_int32_t	fpcr;
+} elf_fpregset_t;
+
+extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture
+ */
+#define elf_check_arch(x) \
+	(((x)->e_machine == EM_CYGNUS_MN10300) ||	\
+	 ((x)->e_machine == EM_MN10300))
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_MN10300
+
+/*
+ * ELF process initialiser
+ */
+#define ELF_PLAT_INIT(_r, load_addr)					\
+do {									\
+	struct pt_regs *_ur = current->thread.uregs;			\
+	_ur->a3   = 0;	_ur->a2   = 0;	_ur->d3   = 0;	_ur->d2   = 0;	\
+	_ur->mcvf = 0;	_ur->mcrl = 0;	_ur->mcrh = 0;	_ur->mdrq = 0;	\
+	_ur->e1   = 0;	_ur->e0   = 0;	_ur->e7   = 0;	_ur->e6   = 0;	\
+	_ur->e5   = 0;	_ur->e4   = 0;	_ur->e3   = 0;	_ur->e2   = 0;	\
+	_ur->lar  = 0;	_ur->lir  = 0;	_ur->mdr  = 0;			\
+	_ur->a1   = 0;	_ur->a0   = 0;	_ur->d1   = 0;	_ur->d0   = 0;	\
+} while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader.  We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ * - must clear the VMALLOC area
+ */
+#define ELF_ET_DYN_BASE         0x04000000
+
+/*
+ * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ * now struct user_regs, they are different)
+ * - ELF_CORE_COPY_REGS has been guessed, and may be wrong
+ */
+#define ELF_CORE_COPY_REGS(pr_reg, regs)	\
+do {						\
+	pr_reg[0]	= regs->a3;		\
+	pr_reg[1]	= regs->a2;		\
+	pr_reg[2]	= regs->d3;		\
+	pr_reg[3]	= regs->d2;		\
+	pr_reg[4]	= regs->mcvf;		\
+	pr_reg[5]	= regs->mcrl;		\
+	pr_reg[6]	= regs->mcrh;		\
+	pr_reg[7]	= regs->mdrq;		\
+	pr_reg[8]	= regs->e1;		\
+	pr_reg[9]	= regs->e0;		\
+	pr_reg[10]	= regs->e7;		\
+	pr_reg[11]	= regs->e6;		\
+	pr_reg[12]	= regs->e5;		\
+	pr_reg[13]	= regs->e4;		\
+	pr_reg[14]	= regs->e3;		\
+	pr_reg[15]	= regs->e2;		\
+	pr_reg[16]	= regs->sp;		\
+	pr_reg[17]	= regs->lar;		\
+	pr_reg[18]	= regs->lir;		\
+	pr_reg[19]	= regs->mdr;		\
+	pr_reg[20]	= regs->a1;		\
+	pr_reg[21]	= regs->a0;		\
+	pr_reg[22]	= regs->d1;		\
+	pr_reg[23]	= regs->d0;		\
+	pr_reg[24]	= regs->orig_d0;	\
+	pr_reg[25]	= regs->epsw;		\
+	pr_reg[26]	= regs->pc;		\
+} while (0);
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports.  This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP	(0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM  (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#endif
+
+#endif /* _ASM_ELF_H */
diff --git a/arch/mn10300/include/asm/emergency-restart.h b/arch/mn10300/include/asm/emergency-restart.h
new file mode 100644
index 0000000..3711bd9
--- /dev/null
+++ b/arch/mn10300/include/asm/emergency-restart.h
@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>
diff --git a/arch/mn10300/include/asm/errno.h b/arch/mn10300/include/asm/errno.h
new file mode 100644
index 0000000..4c82b50
--- /dev/null
+++ b/arch/mn10300/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/arch/mn10300/include/asm/exceptions.h b/arch/mn10300/include/asm/exceptions.h
new file mode 100644
index 0000000..fa16466
--- /dev/null
+++ b/arch/mn10300/include/asm/exceptions.h
@@ -0,0 +1,121 @@
+/* MN10300 Microcontroller core exceptions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_EXCEPTIONS_H
+#define _ASM_EXCEPTIONS_H
+
+#include <linux/linkage.h>
+
+/*
+ * define the breakpoint instruction opcode to use
+ * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can
+ *   (can use 0xF7)
+ */
+#define GDBSTUB_BKPT		0xFF
+
+#ifndef __ASSEMBLY__
+
+/*
+ * enumeration of exception codes (as extracted from TBR MSW)
+ */
+enum exception_code {
+	EXCEP_RESET		= 0x000000,	/* reset */
+
+	/* MMU exceptions */
+	EXCEP_ITLBMISS		= 0x000100,	/* instruction TLB miss */
+	EXCEP_DTLBMISS		= 0x000108,	/* data TLB miss */
+	EXCEP_IAERROR		= 0x000110,	/* instruction address */
+	EXCEP_DAERROR		= 0x000118,	/* data address */
+
+	/* system exceptions */
+	EXCEP_TRAP		= 0x000128,	/* program interrupt (PI instruction) */
+	EXCEP_ISTEP		= 0x000130,	/* single step */
+	EXCEP_IBREAK		= 0x000150,	/* instruction breakpoint */
+	EXCEP_OBREAK		= 0x000158,	/* operand breakpoint */
+	EXCEP_PRIVINS		= 0x000160,	/* privileged instruction execution */
+	EXCEP_UNIMPINS		= 0x000168,	/* unimplemented instruction execution */
+	EXCEP_UNIMPEXINS	= 0x000170,	/* unimplemented extended instruction execution */
+	EXCEP_MEMERR		= 0x000178,	/* illegal memory access */
+	EXCEP_MISALIGN		= 0x000180,	/* misalignment */
+	EXCEP_BUSERROR		= 0x000188,	/* bus error */
+	EXCEP_ILLINSACC		= 0x000190,	/* illegal instruction access */
+	EXCEP_ILLDATACC		= 0x000198,	/* illegal data access */
+	EXCEP_IOINSACC		= 0x0001a0,	/* I/O space instruction access */
+	EXCEP_PRIVINSACC	= 0x0001a8,	/* privileged space instruction access */
+	EXCEP_PRIVDATACC	= 0x0001b0,	/* privileged space data access */
+	EXCEP_DATINSACC		= 0x0001b8,	/* data space instruction access */
+	EXCEP_DOUBLE_FAULT	= 0x000200,	/* double fault */
+
+	/* FPU exceptions */
+	EXCEP_FPU_DISABLED	= 0x0001c0,	/* FPU disabled */
+	EXCEP_FPU_UNIMPINS	= 0x0001c8,	/* FPU unimplemented operation */
+	EXCEP_FPU_OPERATION	= 0x0001d0,	/* FPU operation */
+
+	/* interrupts */
+	EXCEP_WDT		= 0x000240,	/* watchdog timer overflow */
+	EXCEP_NMI		= 0x000248,	/* non-maskable interrupt */
+	EXCEP_IRQ_LEVEL0	= 0x000280,	/* level 0 maskable interrupt */
+	EXCEP_IRQ_LEVEL1	= 0x000288,	/* level 1 maskable interrupt */
+	EXCEP_IRQ_LEVEL2	= 0x000290,	/* level 2 maskable interrupt */
+	EXCEP_IRQ_LEVEL3	= 0x000298,	/* level 3 maskable interrupt */
+	EXCEP_IRQ_LEVEL4	= 0x0002a0,	/* level 4 maskable interrupt */
+	EXCEP_IRQ_LEVEL5	= 0x0002a8,	/* level 5 maskable interrupt */
+	EXCEP_IRQ_LEVEL6	= 0x0002b0,	/* level 6 maskable interrupt */
+
+	/* system calls */
+	EXCEP_SYSCALL0		= 0x000300,	/* system call 0 */
+	EXCEP_SYSCALL1		= 0x000308,	/* system call 1 */
+	EXCEP_SYSCALL2		= 0x000310,	/* system call 2 */
+	EXCEP_SYSCALL3		= 0x000318,	/* system call 3 */
+	EXCEP_SYSCALL4		= 0x000320,	/* system call 4 */
+	EXCEP_SYSCALL5		= 0x000328,	/* system call 5 */
+	EXCEP_SYSCALL6		= 0x000330,	/* system call 6 */
+	EXCEP_SYSCALL7		= 0x000338,	/* system call 7 */
+	EXCEP_SYSCALL8		= 0x000340,	/* system call 8 */
+	EXCEP_SYSCALL9		= 0x000348,	/* system call 9 */
+	EXCEP_SYSCALL10		= 0x000350,	/* system call 10 */
+	EXCEP_SYSCALL11		= 0x000358,	/* system call 11 */
+	EXCEP_SYSCALL12		= 0x000360,	/* system call 12 */
+	EXCEP_SYSCALL13		= 0x000368,	/* system call 13 */
+	EXCEP_SYSCALL14		= 0x000370,	/* system call 14 */
+	EXCEP_SYSCALL15		= 0x000378,	/* system call 15 */
+};
+
+extern void __set_intr_stub(enum exception_code code, void *handler);
+extern void set_intr_stub(enum exception_code code, void *handler);
+extern void set_jtag_stub(enum exception_code code, void *handler);
+
+struct pt_regs;
+
+extern asmlinkage void __common_exception(void);
+extern asmlinkage void itlb_miss(void);
+extern asmlinkage void dtlb_miss(void);
+extern asmlinkage void itlb_aerror(void);
+extern asmlinkage void dtlb_aerror(void);
+extern asmlinkage void raw_bus_error(void);
+extern asmlinkage void double_fault(void);
+extern asmlinkage int  system_call(struct pt_regs *);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void nmi(struct pt_regs *, enum exception_code);
+extern asmlinkage void uninitialised_exception(struct pt_regs *,
+					       enum exception_code);
+extern asmlinkage void irq_handler(void);
+extern asmlinkage void profile_handler(void);
+extern asmlinkage void nmi_handler(void);
+extern asmlinkage void misalignment(struct pt_regs *, enum exception_code);
+
+extern void die(const char *, struct pt_regs *, enum exception_code)
+	ATTRIB_NORET;
+
+extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_EXCEPTIONS_H */
diff --git a/arch/mn10300/include/asm/fb.h b/arch/mn10300/include/asm/fb.h
new file mode 100644
index 0000000..697b24a
--- /dev/null
+++ b/arch/mn10300/include/asm/fb.h
@@ -0,0 +1,23 @@
+/* MN10300 Frame buffer stuff
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FB_H
+#define _ASM_FB_H
+
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H */
diff --git a/arch/mn10300/include/asm/fcntl.h b/arch/mn10300/include/asm/fcntl.h
new file mode 100644
index 0000000..46ab12d
--- /dev/null
+++ b/arch/mn10300/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/mn10300/include/asm/fpu.h b/arch/mn10300/include/asm/fpu.h
new file mode 100644
index 0000000..64a2b83
--- /dev/null
+++ b/arch/mn10300/include/asm/fpu.h
@@ -0,0 +1,85 @@
+/* MN10300 FPU definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FPU_H
+#define _ASM_FPU_H
+
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+
+#ifdef __KERNEL__
+
+/* the task that owns the FPU state */
+extern struct task_struct *fpu_state_owner;
+
+#define set_using_fpu(tsk)				\
+do {							\
+	(tsk)->thread.fpu_flags |= THREAD_USING_FPU;	\
+} while (0)
+
+#define clear_using_fpu(tsk)				\
+do {							\
+	(tsk)->thread.fpu_flags &= ~THREAD_USING_FPU;	\
+} while (0)
+
+#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU)
+
+#define unlazy_fpu(tsk)					\
+do {							\
+	preempt_disable();				\
+	if (fpu_state_owner == (tsk))			\
+		fpu_save(&tsk->thread.fpu_state);	\
+	preempt_enable();				\
+} while (0)
+
+#define exit_fpu()				\
+do {						\
+	struct task_struct *__tsk = current;	\
+	preempt_disable();			\
+	if (fpu_state_owner == __tsk)		\
+		fpu_state_owner = NULL;		\
+	preempt_enable();			\
+} while (0)
+
+#define flush_fpu()					\
+do {							\
+	struct task_struct *__tsk = current;		\
+	preempt_disable();				\
+	if (fpu_state_owner == __tsk) {			\
+		fpu_state_owner = NULL;			\
+		__tsk->thread.uregs->epsw &= ~EPSW_FE;	\
+	}						\
+	preempt_enable();				\
+	clear_using_fpu(__tsk);				\
+} while (0)
+
+extern asmlinkage void fpu_init_state(void);
+extern asmlinkage void fpu_kill_state(struct task_struct *);
+extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+
+#ifdef CONFIG_FPU
+extern asmlinkage void fpu_save(struct fpu_state_struct *);
+extern asmlinkage void fpu_restore(struct fpu_state_struct *);
+#else
+#define fpu_save(a)
+#define fpu_restore(a)
+#endif /* CONFIG_FPU  */
+
+/*
+ * signal frame handlers
+ */
+extern int fpu_setup_sigcontext(struct fpucontext *buf);
+extern int fpu_restore_sigcontext(struct fpucontext *buf);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_FPU_H */
diff --git a/arch/mn10300/include/asm/frame.inc b/arch/mn10300/include/asm/frame.inc
new file mode 100644
index 0000000..5b1949b
--- /dev/null
+++ b/arch/mn10300/include/asm/frame.inc
@@ -0,0 +1,91 @@
+/* MN10300 Microcontroller core system register definitions -*- asm -*-
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FRAME_INC
+#define _ASM_FRAME_INC
+
+#ifndef __ASSEMBLY__
+#error not for use in C files
+#endif
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#define pi break
+
+#define fp a3
+
+###############################################################################
+#
+# build a stack frame from the registers
+# - the caller has subtracted 4 from SP before coming here
+#
+###############################################################################
+.macro SAVE_ALL
+	add	-4,sp				# next exception frame ptr save area
+	movm	[other],(sp)
+	mov	usp,a1
+	mov	a1,(sp)				# USP in MOVM[other] dummy slot
+	movm	[d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
+	mov	sp,fp				# FRAME pointer in A3
+	add	-12,sp				# allow for calls to be made
+	mov	(__frame),a1
+	mov	a1,(REG_NEXT,fp)
+	mov	fp,(__frame)
+
+	and	~EPSW_FE,epsw			# disable the FPU inside the kernel
+
+	# we may be holding current in E2
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+	mov	(__current),e2
+#endif
+.endm
+
+###############################################################################
+#
+# restore the registers from a stack frame
+#
+###############################################################################
+.macro RESTORE_ALL
+	# peel back the stack to the calling frame
+	# - this permits execve() to discard extra frames due to kernel syscalls
+	mov	(__frame),fp
+	mov	fp,sp
+	mov	(REG_NEXT,fp),d0                # userspace has regs->next == 0
+	mov	d0,(__frame)
+
+#ifndef CONFIG_MN10300_USING_JTAG
+	mov	(REG_EPSW,fp),d0
+	btst	EPSW_T,d0
+	beq	99f
+
+	or	EPSW_NMID,epsw
+	movhu	(DCR),d1
+	or	0x0001, d1
+	movhu	d1,(DCR)
+
+99:
+#endif
+	movm	(sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
+
+	# must restore usp even if returning to kernel space,
+	# when CONFIG_PREEMPT is enabled.
+	mov	(sp),a1				# USP in MOVM[other] dummy slot
+	mov	a1,usp
+
+	movm	(sp),[other]
+	add	8,sp
+	rti
+
+.endm
+
+
+#endif /* _ASM_FRAME_INC */
diff --git a/arch/mn10300/include/asm/ftrace.h b/arch/mn10300/include/asm/ftrace.h
new file mode 100644
index 0000000..40a8c17
--- /dev/null
+++ b/arch/mn10300/include/asm/ftrace.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/mn10300/include/asm/futex.h b/arch/mn10300/include/asm/futex.h
new file mode 100644
index 0000000..0b74582
--- /dev/null
+++ b/arch/mn10300/include/asm/futex.h
@@ -0,0 +1 @@
+#include <asm-generic/futex.h>
diff --git a/arch/mn10300/include/asm/gdb-stub.h b/arch/mn10300/include/asm/gdb-stub.h
new file mode 100644
index 0000000..e5a6368
--- /dev/null
+++ b/arch/mn10300/include/asm/gdb-stub.h
@@ -0,0 +1,183 @@
+/* MN10300 Kernel GDB stub definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_GDB_STUB_H
+#define _ASM_GDB_STUB_H
+
+#include <asm/exceptions.h>
+
+/*
+ * register ID numbers in GDB remote protocol
+ */
+
+#define GDB_REGID_PC		9
+#define GDB_REGID_FP		7
+#define GDB_REGID_SP		8
+
+/*
+ * virtual stack layout for the GDB exception handler
+ */
+#define NUMREGS			64
+
+#define GDB_FR_D0		(0 * 4)
+#define GDB_FR_D1		(1 * 4)
+#define GDB_FR_D2		(2 * 4)
+#define GDB_FR_D3		(3 * 4)
+#define GDB_FR_A0		(4 * 4)
+#define GDB_FR_A1		(5 * 4)
+#define GDB_FR_A2		(6 * 4)
+#define GDB_FR_A3		(7 * 4)
+
+#define GDB_FR_SP		(8 * 4)
+#define GDB_FR_PC		(9 * 4)
+#define GDB_FR_MDR		(10 * 4)
+#define GDB_FR_EPSW		(11 * 4)
+#define GDB_FR_LIR		(12 * 4)
+#define GDB_FR_LAR		(13 * 4)
+#define GDB_FR_MDRQ		(14 * 4)
+
+#define GDB_FR_E0		(15 * 4)
+#define GDB_FR_E1		(16 * 4)
+#define GDB_FR_E2		(17 * 4)
+#define GDB_FR_E3		(18 * 4)
+#define GDB_FR_E4		(19 * 4)
+#define GDB_FR_E5		(20 * 4)
+#define GDB_FR_E6		(21 * 4)
+#define GDB_FR_E7		(22 * 4)
+
+#define GDB_FR_SSP		(23 * 4)
+#define GDB_FR_MSP		(24 * 4)
+#define GDB_FR_USP		(25 * 4)
+#define GDB_FR_MCRH		(26 * 4)
+#define GDB_FR_MCRL		(27 * 4)
+#define GDB_FR_MCVF		(28 * 4)
+
+#define GDB_FR_FPCR		(29 * 4)
+#define GDB_FR_DUMMY0		(30 * 4)
+#define GDB_FR_DUMMY1		(31 * 4)
+
+#define GDB_FR_FS0		(32 * 4)
+
+#define GDB_FR_SIZE		(NUMREGS * 4)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This is the same as above, but for the high-level
+ * part of the GDB stub.
+ */
+
+struct gdb_regs {
+	/* saved main processor registers */
+	u32	d0, d1, d2, d3, a0, a1, a2, a3;
+	u32	sp, pc, mdr, epsw, lir, lar, mdrq;
+	u32	e0, e1, e2, e3, e4, e5, e6, e7;
+	u32	ssp, msp, usp, mcrh, mcrl, mcvf;
+
+	/* saved floating point registers */
+	u32	fpcr, _dummy0, _dummy1;
+	u32	fs0,  fs1,  fs2,  fs3,  fs4,  fs5,  fs6,  fs7;
+	u32	fs8,  fs9,  fs10, fs11, fs12, fs13, fs14, fs15;
+	u32	fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23;
+	u32	fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31;
+};
+
+/*
+ * Prototypes
+ */
+extern void show_registers_only(struct pt_regs *regs);
+
+extern asmlinkage void gdbstub_init(void);
+extern asmlinkage void gdbstub_exit(int status);
+extern asmlinkage void gdbstub_io_init(void);
+extern asmlinkage void gdbstub_io_set_baud(unsigned baud);
+extern asmlinkage int  gdbstub_io_rx_char(unsigned char *_ch, int nonblock);
+extern asmlinkage void gdbstub_io_tx_char(unsigned char ch);
+extern asmlinkage void gdbstub_io_tx_flush(void);
+
+extern asmlinkage void gdbstub_io_rx_handler(void);
+extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code);
+extern asmlinkage int  gdbstub_intercept(struct pt_regs *, enum exception_code);
+extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void __gdbstub_bug_trap(void);
+extern asmlinkage void __gdbstub_pause(void);
+extern asmlinkage void start_kernel(void);
+
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern asmlinkage void gdbstub_purge_cache(void);
+#else
+#define gdbstub_purge_cache()	do {} while (0)
+#endif
+
+/* Used to prevent crashes in memory access */
+extern asmlinkage int  gdbstub_read_byte(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_read_word(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_read_dword(const u8 *, u8 *);
+extern asmlinkage int  gdbstub_write_byte(u32, u8 *);
+extern asmlinkage int  gdbstub_write_word(u32, u8 *);
+extern asmlinkage int  gdbstub_write_dword(u32, u8 *);
+
+extern asmlinkage void gdbstub_read_byte_guard(void);
+extern asmlinkage void gdbstub_read_byte_cont(void);
+extern asmlinkage void gdbstub_read_word_guard(void);
+extern asmlinkage void gdbstub_read_word_cont(void);
+extern asmlinkage void gdbstub_read_dword_guard(void);
+extern asmlinkage void gdbstub_read_dword_cont(void);
+extern asmlinkage void gdbstub_write_byte_guard(void);
+extern asmlinkage void gdbstub_write_byte_cont(void);
+extern asmlinkage void gdbstub_write_word_guard(void);
+extern asmlinkage void gdbstub_write_word_cont(void);
+extern asmlinkage void gdbstub_write_dword_guard(void);
+extern asmlinkage void gdbstub_write_dword_cont(void);
+
+extern u8	gdbstub_rx_buffer[PAGE_SIZE];
+extern u32	gdbstub_rx_inp;
+extern u32	gdbstub_rx_outp;
+extern u8	gdbstub_rx_overflow;
+extern u8	gdbstub_busy;
+extern u8	gdbstub_rx_unget;
+
+#ifdef CONFIG_GDBSTUB_DEBUGGING
+extern void gdbstub_printk(const char *fmt, ...)
+	__attribute__((format(printf, 1, 2)));
+#else
+static inline __attribute__((format(printf, 1, 2)))
+void gdbstub_printk(const char *fmt, ...)
+{
+}
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY
+#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_entry(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL
+#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_proto(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_IO
+#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_io(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT
+#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_bkpt(FMT, ...) ({ 0; })
+#endif
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_GDB_STUB_H */
diff --git a/arch/mn10300/include/asm/hardirq.h b/arch/mn10300/include/asm/hardirq.h
new file mode 100644
index 0000000..54d9501
--- /dev/null
+++ b/arch/mn10300/include/asm/hardirq.h
@@ -0,0 +1,48 @@
+/* MN10300 Hardware IRQ statistics and management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HARDIRQ_H
+#define _ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+#include <asm/exceptions.h>
+
+/* assembly code in softirq.h is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int	__softirq_pending;
+	unsigned long	idle_timestamp;
+	unsigned int	__nmi_count;	/* arch dependent */
+	unsigned int	__irq_count;	/* arch dependent */
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(int irq);
+
+/*
+ * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table
+ * - these should jump to __common_exception in entry.S unless there's a good
+ *   reason to do otherwise (see trap_preinit() in traps.c)
+ */
+typedef void (*intr_stub_fnx)(struct pt_regs *regs,
+			      enum exception_code intcode);
+
+/*
+ * manipulate pointers in the Exception table (see entry.S)
+ * - these are indexed by decoding the lower 24 bits of the TBR register
+ * - note that the MN103E010 doesn't always trap through the correct vector,
+ *   but does always set the TBR correctly
+ */
+extern asmlinkage void set_excp_vector(enum exception_code code,
+				       intr_stub_fnx handler);
+
+#endif /* _ASM_HARDIRQ_H */
diff --git a/arch/mn10300/include/asm/highmem.h b/arch/mn10300/include/asm/highmem.h
new file mode 100644
index 0000000..90f2abb
--- /dev/null
+++ b/arch/mn10300/include/asm/highmem.h
@@ -0,0 +1,116 @@
+/* MN10300 Virtual kernel memory mappings for high memory
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/highmem.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* undef for production */
+#undef HIGHMEM_DEBUG
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void __init kmap_init(void);
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define PKMAP_BASE	0xfe000000UL
+#define LAST_PKMAP	1024
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern unsigned long kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline unsigned long kmap(struct page *page)
+{
+	if (in_interrupt())
+		BUG();
+	if (page < highmem_start_page)
+		return page_address(page);
+	return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+	if (in_interrupt())
+		BUG();
+	if (page < highmem_start_page)
+		return;
+	kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline unsigned long kmap_atomic(struct page *page, enum km_type type)
+{
+	enum fixed_addresses idx;
+	unsigned long vaddr;
+
+	if (page < highmem_start_page)
+		return page_address(page);
+
+	debug_kmap_atomic(type);
+	idx = type + KM_TYPE_NR * smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#if HIGHMEM_DEBUG
+	if (!pte_none(*(kmap_pte - idx)))
+		BUG();
+#endif
+	set_pte(kmap_pte - idx, mk_pte(page, kmap_prot));
+	__flush_tlb_one(vaddr);
+
+	return vaddr;
+}
+
+static inline void kunmap_atomic(unsigned long vaddr, enum km_type type)
+{
+#if HIGHMEM_DEBUG
+	enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id();
+
+	if (vaddr < FIXADDR_START) /* FIXME */
+		return;
+
+	if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
+		BUG();
+
+	/*
+	 * force other mappings to Oops if they'll try to access
+	 * this pte without first remap it
+	 */
+	pte_clear(kmap_pte - idx);
+	__flush_tlb_one(vaddr);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/mn10300/include/asm/hw_irq.h b/arch/mn10300/include/asm/hw_irq.h
new file mode 100644
index 0000000..7061990
--- /dev/null
+++ b/arch/mn10300/include/asm/hw_irq.h
@@ -0,0 +1,14 @@
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+#endif /* _ASM_HW_IRQ_H */
diff --git a/arch/mn10300/include/asm/intctl-regs.h b/arch/mn10300/include/asm/intctl-regs.h
new file mode 100644
index 0000000..ba544c7
--- /dev/null
+++ b/arch/mn10300/include/asm/intctl-regs.h
@@ -0,0 +1,73 @@
+/* MN10300 On-board interrupt controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_INTCTL_REGS_H
+#define _ASM_INTCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* interrupt controller registers */
+#define GxICR(X)		__SYSREG(0xd4000000 + (X) * 4, u16)	/* group irq ctrl regs */
+
+#define IAGR			__SYSREG(0xd4000100, u16)	/* intr acceptance group reg */
+#define IAGR_GN			0x00fc		/* group number register
+						 * (documentation _has_ to be wrong)
+						 */
+
+#define EXTMD			__SYSREG(0xd4000200, u16)	/* external pin intr spec reg */
+#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3)
+
+#define SET_XIRQ_TRIGGER(X,Y)			\
+do {						\
+	u16 x = EXTMD;				\
+	x &= ~(3 << ((X) * 2));			\
+	x |= ((Y) & 3) << ((X) * 2);		\
+	EXTMD = x;				\
+} while (0)
+
+#define XIRQ_TRIGGER_LOWLEVEL	0
+#define XIRQ_TRIGGER_HILEVEL	1
+#define XIRQ_TRIGGER_NEGEDGE	2
+#define XIRQ_TRIGGER_POSEDGE	3
+
+/* non-maskable interrupt control */
+#define NMIIRQ			0
+#define NMICR			GxICR(NMIIRQ)	/* NMI control register */
+#define NMICR_NMIF		0x0001		/* NMI pin interrupt flag */
+#define NMICR_WDIF		0x0002		/* watchdog timer overflow flag */
+#define NMICR_ABUSERR		0x0008		/* async bus error flag */
+
+/* maskable interrupt control */
+#define GxICR_DETECT		0x0001		/* interrupt detect flag */
+#define GxICR_REQUEST		0x0010		/* interrupt request flag */
+#define GxICR_ENABLE		0x0100		/* interrupt enable flag */
+#define GxICR_LEVEL		0x7000		/* interrupt priority level */
+#define GxICR_LEVEL_0		0x0000		/* - level 0 */
+#define GxICR_LEVEL_1		0x1000		/* - level 1 */
+#define GxICR_LEVEL_2		0x2000		/* - level 2 */
+#define GxICR_LEVEL_3		0x3000		/* - level 3 */
+#define GxICR_LEVEL_4		0x4000		/* - level 4 */
+#define GxICR_LEVEL_5		0x5000		/* - level 5 */
+#define GxICR_LEVEL_6		0x6000		/* - level 6 */
+#define GxICR_LEVEL_SHIFT	12
+
+#ifndef __ASSEMBLY__
+extern void set_intr_level(int irq, u16 level);
+extern void set_intr_postackable(int irq);
+#endif
+
+/* external interrupts */
+#define XIRQxICR(X)		GxICR((X))	/* external interrupt control regs */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_INTCTL_REGS_H */
diff --git a/arch/mn10300/include/asm/io.h b/arch/mn10300/include/asm/io.h
new file mode 100644
index 0000000..c1a4119
--- /dev/null
+++ b/arch/mn10300/include/asm/io.h
@@ -0,0 +1,301 @@
+/* MN10300 I/O port emulation and memory-mapped I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <asm/page.h> /* I/O is all done through memory accesses */
+#include <asm/cpu-regs.h>
+#include <asm/cacheflush.h>
+
+#define mmiowb() do {} while (0)
+
+/*****************************************************************************/
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the x86 architecture, we just read/write the
+ * memory location directly.
+ */
+static inline u8 readb(const volatile void __iomem *addr)
+{
+	return *(const volatile u8 *) addr;
+}
+
+static inline u16 readw(const volatile void __iomem *addr)
+{
+	return *(const volatile u16 *) addr;
+}
+
+static inline u32 readl(const volatile void __iomem *addr)
+{
+	return *(const volatile u32 *) addr;
+}
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+static inline void writeb(u8 b, volatile void __iomem *addr)
+{
+	*(volatile u8 *) addr = b;
+}
+
+static inline void writew(u16 b, volatile void __iomem *addr)
+{
+	*(volatile u16 *) addr = b;
+}
+
+static inline void writel(u32 b, volatile void __iomem *addr)
+{
+	*(volatile u32 *) addr = b;
+}
+
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+/*****************************************************************************/
+/*
+ * traditional input/output functions
+ */
+static inline u8 inb_local(unsigned long addr)
+{
+	return readb((volatile void __iomem *) addr);
+}
+
+static inline void outb_local(u8 b, unsigned long addr)
+{
+	return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline u8 inb(unsigned long addr)
+{
+	return readb((volatile void __iomem *) addr);
+}
+
+static inline u16 inw(unsigned long addr)
+{
+	return readw((volatile void __iomem *) addr);
+}
+
+static inline u32 inl(unsigned long addr)
+{
+	return readl((volatile void __iomem *) addr);
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+	return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+	return writew(b, (volatile void __iomem *) addr);
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+	return writel(b, (volatile void __iomem *) addr);
+}
+
+#define inb_p(addr)	inb(addr)
+#define inw_p(addr)	inw(addr)
+#define inl_p(addr)	inl(addr)
+#define outb_p(x, addr)	outb((x), (addr))
+#define outw_p(x, addr)	outw((x), (addr))
+#define outl_p(x, addr)	outl((x), (addr))
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u8 *buf = buffer;
+		do {
+			u8 x = inb(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u16 *buf = buffer;
+		do {
+			u16 x = inw(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+	if (count) {
+		u32 *buf = buffer;
+		do {
+			u32 x = inl(addr);
+			*buf++ = x;
+		} while (--count);
+	}
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u8 *buf = buffer;
+		do {
+			outb(*buf++, addr);
+		} while (--count);
+	}
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+	if (count) {
+		const u16 *buf = buffer;
+		do {
+			outw(*buf++, addr);
+		} while (--count);
+	}
+}
+
+extern void __outsl(unsigned long addr, const void *buffer, int count);
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+	if ((unsigned long) buffer & 0x3)
+		return __outsl(addr, buffer, count);
+
+	if (count) {
+		const u32 *buf = buffer;
+		do {
+			outl(*buf++, addr);
+		} while (--count);
+	}
+}
+
+#define ioread8(addr)		readb(addr)
+#define ioread16(addr)		readw(addr)
+#define ioread32(addr)		readl(addr)
+
+#define iowrite8(v, addr)	writeb((v), (addr))
+#define iowrite16(v, addr)	writew((v), (addr))
+#define iowrite32(v, addr)	writel((v), (addr))
+
+#define ioread8_rep(p, dst, count) \
+	insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+	insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+	insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+	outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+	outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+	outsl((unsigned long) (p), (src), (count))
+
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#ifdef __KERNEL__
+
+#include <linux/vmalloc.h>
+#define __io_virt(x) ((void *) (x))
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+	return __pa(address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+	return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+static inline void *__ioremap(unsigned long offset, unsigned long size,
+			      unsigned long flags)
+{
+	return (void *) offset;
+}
+
+static inline void *ioremap(unsigned long offset, unsigned long size)
+{
+	return (void *) offset;
+}
+
+/*
+ * This one maps high address device memory and turns off caching for that
+ * area.  it's useful if some control registers are in such an area and write
+ * combining or read caching is not desirable:
+ */
+static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
+{
+	return (void *) (offset | 0x20000000);
+}
+
+#define ioremap_wc ioremap_nocache
+
+static inline void iounmap(void *addr)
+{
+}
+
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+
+#define xlate_dev_kmem_ptr(p)	((void *) (p))
+#define xlate_dev_mem_ptr(p)	((void *) (p))
+
+/*
+ * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff
+ */
+static inline unsigned long virt_to_bus(volatile void *address)
+{
+	return ((unsigned long) address) & ~0x20000000;
+}
+
+static inline void *bus_to_virt(unsigned long address)
+{
+	return (void *) address;
+}
+
+#define page_to_bus page_to_phys
+
+#define memset_io(a, b, c)	memset(__io_virt(a), (b), (c))
+#define memcpy_fromio(a, b, c)	memcpy((a), __io_virt(b), (c))
+#define memcpy_toio(a, b, c)	memcpy(__io_virt(a), (b), (c))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IO_H */
diff --git a/arch/mn10300/include/asm/ioctl.h b/arch/mn10300/include/asm/ioctl.h
new file mode 100644
index 0000000..b279fe0
--- /dev/null
+++ b/arch/mn10300/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/mn10300/include/asm/ioctls.h b/arch/mn10300/include/asm/ioctls.h
new file mode 100644
index 0000000..dcbfb45
--- /dev/null
+++ b/arch/mn10300/include/asm/ioctls.h
@@ -0,0 +1,88 @@
+#ifndef _ASM_IOCTLS_H
+#define _ASM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 0x2A, struct termios2)
+#define TCSETS2		_IOW('T', 0x2B, struct termios2)
+#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
+#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number
+						       * (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* _ASM_IOCTLS_H */
diff --git a/arch/mn10300/include/asm/ipc.h b/arch/mn10300/include/asm/ipc.h
new file mode 100644
index 0000000..a46e3d9
--- /dev/null
+++ b/arch/mn10300/include/asm/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/arch/mn10300/include/asm/ipcbuf.h b/arch/mn10300/include/asm/ipcbuf.h
new file mode 100644
index 0000000..f6f63d4
--- /dev/null
+++ b/arch/mn10300/include/asm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_IPCBUF_H
+#define _ASM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* _ASM_IPCBUF_H */
diff --git a/arch/mn10300/include/asm/irq.h b/arch/mn10300/include/asm/irq.h
new file mode 100644
index 0000000..53b3801
--- /dev/null
+++ b/arch/mn10300/include/asm/irq.h
@@ -0,0 +1,32 @@
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/irq.h:
+ *   - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <asm/intctl-regs.h>
+#include <asm/reset-regs.h>
+#include <asm/proc/irq.h>
+
+/* this number is used when no interrupt has been assigned */
+#define NO_IRQ		INT_MAX
+
+/* hardware irq numbers */
+#define NR_IRQS		GxICR_NUM_IRQS
+
+/* external hardware irq numbers */
+#define NR_XIRQS	GxICR_NUM_XIRQS
+
+#define irq_canonicalize(IRQ) (IRQ)
+
+#endif /* _ASM_IRQ_H */
diff --git a/arch/mn10300/include/asm/irq_regs.h b/arch/mn10300/include/asm/irq_regs.h
new file mode 100644
index 0000000..a848cd2
--- /dev/null
+++ b/arch/mn10300/include/asm/irq_regs.h
@@ -0,0 +1,24 @@
+/* MN10300 IRQ registers pointer definition
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_REGS_H
+#define _ASM_IRQ_REGS_H
+
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack
+ */
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#ifndef __ASSEMBLY__
+#define get_irq_regs() (__frame)
+#endif
+
+#endif /* _ASM_IRQ_REGS_H */
diff --git a/arch/mn10300/include/asm/kdebug.h b/arch/mn10300/include/asm/kdebug.h
new file mode 100644
index 0000000..0f47e11
--- /dev/null
+++ b/arch/mn10300/include/asm/kdebug.h
@@ -0,0 +1,22 @@
+/* MN10300 In-kernel death knells
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_KDEBUG_H
+#define _ASM_KDEBUG_H
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_BREAKPOINT,
+	DIE_GPF,
+};
+
+#endif /* _ASM_KDEBUG_H */
diff --git a/arch/mn10300/include/asm/kmap_types.h b/arch/mn10300/include/asm/kmap_types.h
new file mode 100644
index 0000000..3398f9f
--- /dev/null
+++ b/arch/mn10300/include/asm/kmap_types.h
@@ -0,0 +1,31 @@
+/* MN10300 kmap_atomic() slot IDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif /* _ASM_KMAP_TYPES_H */
diff --git a/arch/mn10300/include/asm/kprobes.h b/arch/mn10300/include/asm/kprobes.h
new file mode 100644
index 0000000..c800b59
--- /dev/null
+++ b/arch/mn10300/include/asm/kprobes.h
@@ -0,0 +1,50 @@
+/* MN10300 Kernel Probes support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+struct kprobe;
+
+typedef unsigned char kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0xff
+#define MAX_INSN_SIZE 8
+#define MAX_STACK_SIZE 128
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+	/*  copy of original instruction
+	 */
+	kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+extern const int kretprobe_blacklist_size;
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+
+#define flush_insn_slot(p)  do {} while (0)
+
+extern void arch_remove_kprobe(struct kprobe *p);
+
+#endif /* _ASM_KPROBES_H */
diff --git a/arch/mn10300/include/asm/linkage.h b/arch/mn10300/include/asm/linkage.h
new file mode 100644
index 0000000..dda3002
--- /dev/null
+++ b/arch/mn10300/include/asm/linkage.h
@@ -0,0 +1,20 @@
+/* MN10300 Linkage and calling-convention overrides
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_LINKAGE_H
+#define _ASM_LINKAGE_H
+
+/* don't override anything */
+#define asmlinkage
+
+#define __ALIGN		.align 4,0xcb
+#define __ALIGN_STR	".align 4,0xcb"
+
+#endif
diff --git a/arch/mn10300/include/asm/local.h b/arch/mn10300/include/asm/local.h
new file mode 100644
index 0000000..c11c530
--- /dev/null
+++ b/arch/mn10300/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/mn10300/include/asm/mc146818rtc.h b/arch/mn10300/include/asm/mc146818rtc.h
new file mode 100644
index 0000000..df6bc6e
--- /dev/null
+++ b/arch/mn10300/include/asm/mc146818rtc.h
@@ -0,0 +1 @@
+#include <asm/rtc-regs.h>
diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h
new file mode 100644
index 0000000..b7986b6
--- /dev/null
+++ b/arch/mn10300/include/asm/mman.h
@@ -0,0 +1,28 @@
+/* MN10300 Constants for mmap and co.
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * - Derived from asm-x86/mman.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MMAN_H
+#define _ASM_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* _ASM_MMAN_H */
diff --git a/arch/mn10300/include/asm/mmu.h b/arch/mn10300/include/asm/mmu.h
new file mode 100644
index 0000000..2d2d097
--- /dev/null
+++ b/arch/mn10300/include/asm/mmu.h
@@ -0,0 +1,19 @@
+/* MN10300 Memory management context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-frv/mmu.h
+ */
+
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+
+/*
+ * MMU context
+ */
+typedef struct {
+	unsigned long	tlbpid[NR_CPUS];	/* TLB PID for this process on
+						 * each CPU */
+} mm_context_t;
+
+#endif /* _ASM_MMU_H */
diff --git a/arch/mn10300/include/asm/mmu_context.h b/arch/mn10300/include/asm/mmu_context.h
new file mode 100644
index 0000000..a9e2e34
--- /dev/null
+++ b/arch/mn10300/include/asm/mmu_context.h
@@ -0,0 +1,138 @@
+/* MN10300 MMU context management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m32r/mmu_context.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * This implements an algorithm to provide TLB PID mappings to provide
+ * selective access to the TLB for processes, thus reducing the number of TLB
+ * flushes required.
+ *
+ * Note, however, that the M32R algorithm is technically broken as it does not
+ * handle version wrap-around, and could, theoretically, have a problem with a
+ * very long lived program that sleeps long enough for the version number to
+ * wrap all the way around so that its TLB mappings appear valid once again.
+ */
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm-generic/mm_hooks.h>
+
+#define MMU_CONTEXT_TLBPID_MASK		0x000000ffUL
+#define MMU_CONTEXT_VERSION_MASK	0xffffff00UL
+#define MMU_CONTEXT_FIRST_VERSION	0x00000100UL
+#define MMU_NO_CONTEXT			0x00000000UL
+
+extern unsigned long mmu_context_cache[NR_CPUS];
+#define mm_context(mm)	(mm->context.tlbpid[smp_processor_id()])
+
+#define enter_lazy_tlb(mm, tsk)	do {} while (0)
+
+#ifdef CONFIG_SMP
+#define cpu_ran_vm(cpu, task) \
+	cpu_set((cpu), (task)->cpu_vm_mask)
+#define cpu_maybe_ran_vm(cpu, task) \
+	cpu_test_and_set((cpu), (task)->cpu_vm_mask)
+#else
+#define cpu_ran_vm(cpu, task)		do {} while (0)
+#define cpu_maybe_ran_vm(cpu, task)	true
+#endif /* CONFIG_SMP */
+
+/*
+ * allocate an MMU context
+ */
+static inline unsigned long allocate_mmu_context(struct mm_struct *mm)
+{
+	unsigned long *pmc = &mmu_context_cache[smp_processor_id()];
+	unsigned long mc = ++(*pmc);
+
+	if (!(mc & MMU_CONTEXT_TLBPID_MASK)) {
+		/* we exhausted the TLB PIDs of this version on this CPU, so we
+		 * flush this CPU's TLB in its entirety and start new cycle */
+		flush_tlb_all();
+
+		/* fix the TLB version if needed (we avoid version #0 so as to
+		 * distingush MMU_NO_CONTEXT) */
+		if (!mc)
+			*pmc = mc = MMU_CONTEXT_FIRST_VERSION;
+	}
+	mm_context(mm) = mc;
+	return mc;
+}
+
+/*
+ * get an MMU context if one is needed
+ */
+static inline unsigned long get_mmu_context(struct mm_struct *mm)
+{
+	unsigned long mc = MMU_NO_CONTEXT, cache;
+
+	if (mm) {
+		cache = mmu_context_cache[smp_processor_id()];
+		mc = mm_context(mm);
+
+		/* if we have an old version of the context, replace it */
+		if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK)
+			mc = allocate_mmu_context(mm);
+	}
+	return mc;
+}
+
+/*
+ * initialise the context related info for a new mm_struct instance
+ */
+static inline int init_new_context(struct task_struct *tsk,
+				   struct mm_struct *mm)
+{
+	int num_cpus = NR_CPUS, i;
+
+	for (i = 0; i < num_cpus; i++)
+		mm->context.tlbpid[i] = MMU_NO_CONTEXT;
+	return 0;
+}
+
+/*
+ * destroy context related info for an mm_struct that is about to be put to
+ * rest
+ */
+#define destroy_context(mm)	do { } while (0)
+
+/*
+ * after we have set current->mm to a new value, this activates the context for
+ * the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, int cpu)
+{
+	PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK;
+}
+
+/*
+ * change between virtual memory sets
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	int cpu = smp_processor_id();
+
+	if (prev != next) {
+		cpu_ran_vm(cpu, next);
+		activate_context(next, cpu);
+		PTBR = (unsigned long) next->pgd;
+	} else if (!cpu_maybe_ran_vm(cpu, next)) {
+		activate_context(next, cpu);
+	}
+}
+
+#define deactivate_mm(tsk, mm)	do {} while (0)
+#define activate_mm(prev, next)	switch_mm((prev), (next), NULL)
+
+#endif /* _ASM_MMU_CONTEXT_H */
diff --git a/arch/mn10300/include/asm/module.h b/arch/mn10300/include/asm/module.h
new file mode 100644
index 0000000..5d7057d
--- /dev/null
+++ b/arch/mn10300/include/asm/module.h
@@ -0,0 +1,27 @@
+/* MN10300 Arch-specific module definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ * Derived from include/asm-i386/module.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+struct mod_arch_specific {
+};
+
+#define Elf_Shdr	Elf32_Shdr
+#define Elf_Sym		Elf32_Sym
+#define Elf_Ehdr	Elf32_Ehdr
+
+/*
+ * Include the MN10300 architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
+
+#endif /* _ASM_MODULE_H */
diff --git a/arch/mn10300/include/asm/msgbuf.h b/arch/mn10300/include/asm/msgbuf.h
new file mode 100644
index 0000000..8b60245
--- /dev/null
+++ b/arch/mn10300/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm	msg_perm;
+	__kernel_time_t		msg_stime;	/* last msgsnd time */
+	unsigned long		__unused1;
+	__kernel_time_t		msg_rtime;	/* last msgrcv time */
+	unsigned long		__unused2;
+	__kernel_time_t		msg_ctime;	/* last change time */
+	unsigned long		__unused3;
+	unsigned long		msg_cbytes;	/* current number of bytes on queue */
+	unsigned long		msg_qnum;	/* number of messages in queue */
+	unsigned long		msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t		msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t		msg_lrpid;	/* last receive pid */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
diff --git a/arch/mn10300/include/asm/mutex.h b/arch/mn10300/include/asm/mutex.h
new file mode 100644
index 0000000..84f5490
--- /dev/null
+++ b/arch/mn10300/include/asm/mutex.h
@@ -0,0 +1,16 @@
+/* MN10300 Mutex fastpath
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+#include <asm-generic/mutex-null.h>
diff --git a/arch/mn10300/include/asm/nmi.h b/arch/mn10300/include/asm/nmi.h
new file mode 100644
index 0000000..f3671cb
--- /dev/null
+++ b/arch/mn10300/include/asm/nmi.h
@@ -0,0 +1,14 @@
+/* MN10300 NMI handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_NMI_H
+#define _ASM_NMI_H
+
+#endif /* _ASM_NMI_H */
diff --git a/arch/mn10300/include/asm/page.h b/arch/mn10300/include/asm/page.h
new file mode 100644
index 0000000..8288e12
--- /dev/null
+++ b/arch/mn10300/include/asm/page.h
@@ -0,0 +1,128 @@
+/* MN10300 Page table definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE - 1))
+#else
+#define PAGE_SIZE	+(1 << PAGE_SHIFT)	/* unary plus marks an
+						 * immediate val not an addr */
+#define PAGE_MASK	+(~(PAGE_SIZE - 1))
+#endif
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to, from)	memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+
+#define clear_user_page(addr, vaddr, page)	clear_page(addr)
+#define copy_user_page(vto, vfrom, vaddr, to)	copy_page(vto, vfrom)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define PTE_MASK	PAGE_MASK
+#define HPAGE_SHIFT	22
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE		((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#endif
+
+#define pte_val(x)	((x).pte)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) })
+#define __pgd(x)	((pgd_t) { (x) })
+#define __pgprot(x)	((pgprot_t) { (x) })
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * This handles the memory map.. We could make this a config
+ * option, but too many people screw it up, and too few need
+ * it.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ */
+
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size) __attribute__((const));
+static inline int get_order(unsigned long size)
+{
+	int order;
+
+	size = (size - 1) >> (PAGE_SHIFT - 1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define __PAGE_OFFSET		(PAGE_OFFSET_RAW)
+#define PAGE_OFFSET		((unsigned long) __PAGE_OFFSET)
+
+/*
+ * main RAM and kernel working space are coincident at 0x90000000, but to make
+ * life more interesting, there's also an uncached virtual shadow at 0xb0000000
+ * - these mappings are fixed in the MMU
+ */
+#define __pfn_disp		(CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT)
+
+#define __pa(x)			((unsigned long)(x))
+#define __va(x)			((void *)(unsigned long)(x))
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define pfn_to_page(pfn)	(mem_map + ((pfn) - __pfn_disp))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map) + __pfn_disp)
+
+#define pfn_valid(pfn)					\
+({							\
+	unsigned long __pfn = (pfn) - __pfn_disp;	\
+	__pfn < max_mapnr;				\
+})
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(VM_READ | VM_WRITE | \
+	((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
+		 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PAGE_H */
diff --git a/arch/mn10300/include/asm/page_offset.h b/arch/mn10300/include/asm/page_offset.h
new file mode 100644
index 0000000..8eb5b16
--- /dev/null
+++ b/arch/mn10300/include/asm/page_offset.h
@@ -0,0 +1,11 @@
+/* MN10300 Kernel base address
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ */
+#ifndef _ASM_PAGE_OFFSET_H
+#define _ASM_PAGE_OFFSET_H
+
+#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS
+
+#endif
diff --git a/arch/mn10300/include/asm/param.h b/arch/mn10300/include/asm/param.h
new file mode 100644
index 0000000..789b1df
--- /dev/null
+++ b/arch/mn10300/include/asm/param.h
@@ -0,0 +1,34 @@
+/* MN10300 Kernel parameters
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+#define USER_HZ		100		/* .. some user interfaces are in
+					 * "ticks" */
+#define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ		100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#define COMMAND_LINE_SIZE 256
+
+#endif /* _ASM_PARAM_H */
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
new file mode 100644
index 0000000..0517b45
--- /dev/null
+++ b/arch/mn10300/include/asm/pci.h
@@ -0,0 +1,129 @@
+/* MN10300 PCI definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#ifdef __KERNEL__
+#include <linux/mm.h>		/* for struct page */
+
+#if 0
+#define __pcbdebug(FMT, ADDR, ...) \
+	printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \
+	       (u32)(ADDR), ##__VA_ARGS__)
+
+#define __pcidebug(FMT, BUS, DEVFN, WHERE,...)		\
+do {							\
+	printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n",	\
+	       (BUS)->number,					\
+	       PCI_SLOT(DEVFN),					\
+	       PCI_FUNC(DEVFN),					\
+	       (u32)(WHERE), ##__VA_ARGS__);			\
+} while (0)
+
+#else
+#define __pcbdebug(FMT, ADDR, ...)		do {} while (0)
+#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...)	do {} while (0)
+#endif
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes or
+ * architectures with incomplete PCI setup by the loader */
+
+#ifdef CONFIG_PCI
+#define pcibios_assign_all_busses()	1
+extern void unit_pci_init(void);
+#else
+#define pcibios_assign_all_busses()	0
+#endif
+
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO		0xBE000004
+#define PCIBIOS_MIN_MEM		0xB8000000
+
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq);
+
+/* Dynamic DMA mapping stuff.
+ * i386 has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask)	(0)
+
+/* Return the index of the PCI controller for device. */
+static inline int pci_controller_num(struct pci_dev *dev)
+{
+	return 0;
+}
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state,
+			       int write_combine);
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/**
+ * pcibios_resource_to_bus - convert resource to PCI bus address
+ * @dev: device which owns this resource
+ * @region: converted bus-centric region (start,end)
+ * @res: resource to convert
+ *
+ * Convert a resource to a PCI device bus address or bus window.
+ */
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+				    struct pci_bus_region *region,
+				    struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+				    struct resource *res,
+				    struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+#define pcibios_scan_all_fns(a, b)	0
+
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? 15 : 14;
+}
+
+#endif /* _ASM_PCI_H */
diff --git a/arch/mn10300/include/asm/percpu.h b/arch/mn10300/include/asm/percpu.h
new file mode 100644
index 0000000..06a959d
--- /dev/null
+++ b/arch/mn10300/include/asm/percpu.h
@@ -0,0 +1 @@
+#include <asm-generic/percpu.h>
diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h
new file mode 100644
index 0000000..ec057e1
--- /dev/null
+++ b/arch/mn10300/include/asm/pgalloc.h
@@ -0,0 +1,56 @@
+/* MN10300 Page and page table/directory allocation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/threads.h>
+#include <linux/mm.h>		/* for struct page */
+
+struct mm_struct;
+struct page;
+
+/* attach a page table to a PMD entry */
+#define pmd_populate_kernel(mm, pmd, pte) \
+	set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE))
+
+static inline
+void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
+{
+	set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *, pgd_t *);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+	__free_page(pte);
+}
+
+
+#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+
+#endif /* _ASM_PGALLOC_H */
diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h
new file mode 100644
index 0000000..6dc30fc
--- /dev/null
+++ b/arch/mn10300/include/asm/pgtable.h
@@ -0,0 +1,492 @@
+/* MN10300 Page table manipulators and constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * The Linux memory management assumes a three-level page table setup. On
+ * the i386, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * i386 mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the i386 page table tree for the purposes of the MN10300 TLB handler
+ * functions.
+ */
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#include <asm/cpu-regs.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <linux/threads.h>
+
+#include <asm/bitops.h>
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+extern unsigned long empty_zero_page[1024];
+extern spinlock_t pgd_lock;
+extern struct page *pgd_list;
+
+extern void pmd_ctor(void *, struct kmem_cache *, unsigned long);
+extern void pgtable_cache_init(void);
+extern void paging_init(void);
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The Linux mn10300 paging architecture only implements both the traditional
+ * 2-level page tables
+ */
+#define PGDIR_SHIFT	22
+#define PTRS_PER_PGD	1024
+#define PTRS_PER_PUD	1	/* we don't really have any PUD physically */
+#define PTRS_PER_PMD	1	/* we don't really have any PMD physically */
+#define PTRS_PER_PTE	1024
+
+#define PGD_SIZE	PAGE_SIZE
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE - 1))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#define USER_PGD_PTRS		(PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS		(PTRS_PER_PGD - USER_PGD_PTRS)
+
+#define TWOLEVEL_PGDIR_SHIFT	22
+#define BOOT_USER_PGD_PTRS	(__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS	(1024 - BOOT_USER_PGD_PTRS)
+
+#ifndef __ASSEMBLY__
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+#endif
+
+/*
+ * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM
+ * area has to be in the lower half of the virtual address range (the upper
+ * half is not translated through the TLB).
+ *
+ * So in this case, the vmalloc area goes at the bottom of the address map
+ * (leaving a hole at the very bottom to catch addressing errors), and
+ * userspace starts immediately above.
+ *
+ * The vmalloc() routines also leaves a hole of 4kB between each vmalloced
+ * area to catch addressing errors.
+ */
+#define VMALLOC_OFFSET	(8 * 1024 * 1024)
+#define VMALLOC_START	(0x70000000)
+#define VMALLOC_END	(0x7C000000)
+
+#ifndef __ASSEMBLY__
+extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
+#endif
+
+/* IPTEL/DPTEL bit assignments */
+#define _PAGE_BIT_VALID		xPTEL_V_BIT
+#define _PAGE_BIT_ACCESSED	xPTEL_UNUSED1_BIT	/* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_NX		xPTEL_UNUSED2_BIT	/* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_CACHE		xPTEL_C_BIT
+#define _PAGE_BIT_PRESENT	xPTEL_PV_BIT
+#define _PAGE_BIT_DIRTY		xPTEL_D_BIT
+#define _PAGE_BIT_GLOBAL	xPTEL_G_BIT
+
+#define _PAGE_VALID		xPTEL_V
+#define _PAGE_ACCESSED		xPTEL_UNUSED1
+#define _PAGE_NX		xPTEL_UNUSED2		/* no-execute bit */
+#define _PAGE_CACHE		xPTEL_C
+#define _PAGE_PRESENT		xPTEL_PV
+#define _PAGE_DIRTY		xPTEL_D
+#define _PAGE_PROT		xPTEL_PR
+#define _PAGE_PROT_RKNU		xPTEL_PR_ROK
+#define _PAGE_PROT_WKNU		xPTEL_PR_RWK
+#define _PAGE_PROT_RKRU		xPTEL_PR_ROK_ROU
+#define _PAGE_PROT_WKRU		xPTEL_PR_RWK_ROU
+#define _PAGE_PROT_WKWU		xPTEL_PR_RWK_RWU
+#define _PAGE_GLOBAL		xPTEL_G
+#define _PAGE_PSE		xPTEL_PS_4Mb		/* 4MB page */
+
+#define _PAGE_FILE		xPTEL_UNUSED1_BIT	/* set:pagecache unset:swap */
+
+#define __PAGE_PROT_UWAUX	0x040
+#define __PAGE_PROT_USER	0x080
+#define __PAGE_PROT_WRITE	0x100
+
+#define _PAGE_PRESENTV		(_PAGE_PRESENT|_PAGE_VALID)
+#define _PAGE_PROTNONE		0x000	/* If not present */
+
+#ifndef __ASSEMBLY__
+
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+#define _PAGE_TABLE	(_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define __PAGE_NONE	(_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_SHARED	(_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_COPY	(_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_READONLY	(_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+
+#define PAGE_NONE		__pgprot(__PAGE_NONE     | _PAGE_NX)
+#define PAGE_SHARED_NOEXEC	__pgprot(__PAGE_SHARED   | _PAGE_NX)
+#define PAGE_COPY_NOEXEC	__pgprot(__PAGE_COPY     | _PAGE_NX)
+#define PAGE_READONLY_NOEXEC	__pgprot(__PAGE_READONLY | _PAGE_NX)
+#define PAGE_SHARED_EXEC	__pgprot(__PAGE_SHARED)
+#define PAGE_COPY_EXEC		__pgprot(__PAGE_COPY)
+#define PAGE_READONLY_EXEC	__pgprot(__PAGE_READONLY)
+#define PAGE_COPY		PAGE_COPY_NOEXEC
+#define PAGE_READONLY		PAGE_READONLY_NOEXEC
+#define PAGE_SHARED		PAGE_SHARED_EXEC
+
+#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
+
+#define __PAGE_KERNEL		(__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_NOCACHE	(__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX)
+#define __PAGE_KERNEL_EXEC	(__PAGE_KERNEL & ~_PAGE_NX)
+#define __PAGE_KERNEL_RO	(__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_LARGE	(__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
+
+#define PAGE_KERNEL		__pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO		__pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC	__pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_NOCACHE	__pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_LARGE	__pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_EXEC	__pgprot(__PAGE_KERNEL_LARGE_EXEC)
+
+/*
+ * Whilst the MN10300 can do page protection for execute (given separate data
+ * and insn TLBs), we are not supporting it at the moment. Write permission,
+ * however, always implies read permission (but not execute permission).
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY_NOEXEC
+#define __P010	PAGE_COPY_NOEXEC
+#define __P011	PAGE_COPY_NOEXEC
+#define __P100	PAGE_READONLY_EXEC
+#define __P101	PAGE_READONLY_EXEC
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY_NOEXEC
+#define __S010	PAGE_SHARED_NOEXEC
+#define __S011	PAGE_SHARED_NOEXEC
+#define __S100	PAGE_READONLY_EXEC
+#define __S101	PAGE_READONLY_EXEC
+#define __S110	PAGE_SHARED_EXEC
+#define __S111	PAGE_SHARED_EXEC
+
+/*
+ * Define this to warn about kernel memory accesses that are
+ * done without a 'verify_area(VERIFY_WRITE,..)'
+ */
+#undef TEST_VERIFY_AREA
+
+#define pte_present(x)	(pte_val(x) & _PAGE_VALID)
+#define pte_clear(mm, addr, xp)				\
+do {							\
+	set_pte_at((mm), (addr), (xp), __pte(0));	\
+} while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(!pmd_none(x))
+#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
+#define	pmd_bad(x)	0
+
+
+#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_user(pte_t pte)	{ return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_read(pte_t pte)	{ return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_dirty(pte_t pte)	{ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)	{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte)	{ return pte_val(pte) & __PAGE_PROT_WRITE; }
+static inline int pte_special(pte_t pte){ return 0; }
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)	{ return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+	pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte;
+}
+static inline pte_t pte_exprotect(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_NX; return pte;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkexec(pte_t pte)	{ pte_val(pte) &= ~_PAGE_NX; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+	pte_val(pte) |= __PAGE_PROT_USER;
+	if (pte_write(pte))
+		pte_val(pte) |= __PAGE_PROT_UWAUX;
+	return pte;
+}
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_val(pte) |= __PAGE_PROT_WRITE;
+	if (pte_val(pte) & __PAGE_PROT_USER)
+		pte_val(pte) |= __PAGE_PROT_UWAUX;
+	return pte;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
+
+#define pte_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
+	       __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+	       __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_clear(xp)				do { } while (0)
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval)			(*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval)	set_pte((ptep), (pteval))
+#define set_pte_atomic(pteptr, pteval)		set_pte((pteptr), (pteval))
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define ptep_get_and_clear(mm, addr, ptep) \
+	__pte(xchg(&(ptep)->pte, 0))
+#define pte_same(a, b)		(pte_val(a) == pte_val(b))
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+#define pte_none(x)		(!pte_val(x))
+#define pte_pfn(x)		((unsigned long) (pte_val(x) >> PAGE_SHIFT))
+#define __pfn_addr(pfn)		((pfn) << PAGE_SHIFT)
+#define pfn_pte(pfn, prot)	__pte(__pfn_addr(pfn) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(__pfn_addr(pfn) | pgprot_val(prot))
+
+/*
+ * All present user pages are user-executable:
+ */
+static inline int pte_exec(pte_t pte)
+{
+	return pte_user(pte);
+}
+
+/*
+ * All present pages are kernel-executable:
+ */
+static inline int pte_exec_kernel(pte_t pte)
+{
+	return 1;
+}
+
+/*
+ * Bits 0 and 1 are taken, split up the 29 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS	29
+
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 2)
+#define pgoff_to_pte(off)	__pte((off) << 2 | _PAGE_FILE)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x)			(((x).val >> 2) & 0x3f)
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset) \
+	((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		__pte((x).val)
+
+static inline
+int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr,
+			      pte_t *ptep)
+{
+	if (!pte_dirty(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+static inline
+int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr,
+			      pte_t *ptep)
+{
+	if (!pte_young(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte);
+}
+
+static inline
+void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX);
+}
+
+static inline void ptep_mkdirty(pte_t *ptep)
+{
+	set_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable".  On processors which
+ * do not support it, this is a no-op.
+ */
+#define pgprot_noncached(prot)	__pgprot(pgprot_val(prot) | _PAGE_CACHE)
+
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry) \
+	((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) &= _PAGE_CHG_MASK;
+	pte_val(pte) |= pgprot_val(newprot);
+	return pte;
+}
+
+#define page_pte(page)	page_pte_prot((page), __pgprot(0))
+
+#define pmd_page_kernel(pmd) \
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#define pmd_page(pmd)	pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+
+#define pmd_large(pmd) \
+	((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \
+	 (_PAGE_PSE | _PAGE_PRESENT))
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_index(address) \
+	(((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_kernel(*(dir)) +  pte_index(address))
+
+/*
+ * Make a given kernel text page executable/non-executable.
+ * Returns the previous executability setting of that page (which
+ * is used to restore the previous state). Used by the SMP bootup code.
+ * NOTE: this is an __init function for security reasons.
+ */
+static inline int set_kernel_exec(unsigned long vaddr, int enable)
+{
+	return 0;
+}
+
+#define pte_offset_map(dir, address) \
+	((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte)		do {} while (0)
+#define pte_unmap_nested(pte)	do {} while (0)
+
+/*
+ * The MN10300 has external MMU info in the form of a TLB: this is adapted from
+ * the kernel page tables containing the necessary information by tlb-mn10300.S
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma,
+			     unsigned long address, pte_t pte);
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+	remap_pfn_range((vma), (vaddr), (pfn), (size), (prot))
+
+#define MK_IOSPACE_PFN(space, pfn)	(pfn)
+#define GET_IOSPACE(pfn)		0
+#define GET_PFN(pfn)			(pfn)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTEP_MKDIRTY
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_H */
diff --git a/arch/mn10300/include/asm/pio-regs.h b/arch/mn10300/include/asm/pio-regs.h
new file mode 100644
index 0000000..96bc818
--- /dev/null
+++ b/arch/mn10300/include/asm/pio-regs.h
@@ -0,0 +1,233 @@
+/* MN10300 On-board I/O port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PIO_REGS_H
+#define _ASM_PIO_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* I/O port 0 */
+#define	P0MD			__SYSREG(0xdb000000, u16)	/* mode reg */
+#define P0MD_0			0x0003	/* mask */
+#define P0MD_0_IN		0x0000	/* input mode */
+#define P0MD_0_OUT		0x0001	/* output mode */
+#define P0MD_0_TM0IO		0x0002	/* timer 0 I/O mode */
+#define P0MD_0_EYECLK		0x0003	/* test signal output (clock) */
+#define P0MD_1			0x000c
+#define P0MD_1_IN		0x0000
+#define P0MD_1_OUT		0x0004
+#define P0MD_1_TM1IO		0x0008	/* timer 1 I/O mode */
+#define P0MD_1_EYED		0x000c	/* test signal output (data) */
+#define P0MD_2			0x0030
+#define P0MD_2_IN		0x0000
+#define P0MD_2_OUT		0x0010
+#define P0MD_2_TM2IO		0x0020	/* timer 2 I/O mode */
+#define P0MD_3			0x00c0
+#define P0MD_3_IN		0x0000
+#define P0MD_3_OUT		0x0040
+#define P0MD_3_TM3IO		0x0080	/* timer 3 I/O mode */
+#define P0MD_4			0x0300
+#define P0MD_4_IN		0x0000
+#define P0MD_4_OUT		0x0100
+#define P0MD_4_TM4IO		0x0200	/* timer 4 I/O mode */
+#define P0MD_4_XCTS		0x0300	/* XCTS input for serial port 2 */
+#define P0MD_5			0x0c00
+#define P0MD_5_IN		0x0000
+#define P0MD_5_OUT		0x0400
+#define P0MD_5_TM5IO		0x0800	/* timer 5 I/O mode */
+#define P0MD_6			0x3000
+#define P0MD_6_IN		0x0000
+#define P0MD_6_OUT		0x1000
+#define P0MD_6_TM6IOA		0x2000	/* timer 6 I/O mode A */
+#define P0MD_7			0xc000
+#define P0MD_7_IN		0x0000
+#define P0MD_7_OUT		0x4000
+#define P0MD_7_TM6IOB		0x8000	/* timer 6 I/O mode B */
+
+#define	P0IN			__SYSREG(0xdb000004, u8)	/* in reg */
+#define	P0OUT			__SYSREG(0xdb000008, u8)	/* out reg */
+
+#define	P0TMIO			__SYSREG(0xdb00000c, u8)	/* TM pin I/O control reg */
+#define P0TMIO_TM0_IN		0x00
+#define P0TMIO_TM0_OUT		0x01
+#define P0TMIO_TM1_IN		0x00
+#define P0TMIO_TM1_OUT		0x02
+#define P0TMIO_TM2_IN		0x00
+#define P0TMIO_TM2_OUT		0x04
+#define P0TMIO_TM3_IN		0x00
+#define P0TMIO_TM3_OUT		0x08
+#define P0TMIO_TM4_IN		0x00
+#define P0TMIO_TM4_OUT		0x10
+#define P0TMIO_TM5_IN		0x00
+#define P0TMIO_TM5_OUT		0x20
+#define P0TMIO_TM6A_IN		0x00
+#define P0TMIO_TM6A_OUT		0x40
+#define P0TMIO_TM6B_IN		0x00
+#define P0TMIO_TM6B_OUT		0x80
+
+/* I/O port 1 */
+#define	P1MD			__SYSREG(0xdb000100, u16)	/* mode reg */
+#define P1MD_0			0x0003	/* mask */
+#define P1MD_0_IN		0x0000	/* input mode */
+#define P1MD_0_OUT		0x0001	/* output mode */
+#define P1MD_0_TM7IO		0x0002	/* timer 7 I/O mode */
+#define P1MD_0_ADTRG		0x0003	/* A/D converter trigger mode */
+#define P1MD_1			0x000c
+#define P1MD_1_IN		0x0000
+#define P1MD_1_OUT		0x0004
+#define P1MD_1_TM8IO		0x0008	/* timer 8 I/O mode */
+#define P1MD_1_XDMR0		0x000c	/* DMA request input 0 mode */
+#define P1MD_2			0x0030
+#define P1MD_2_IN		0x0000
+#define P1MD_2_OUT		0x0010
+#define P1MD_2_TM9IO		0x0020	/* timer 9 I/O mode */
+#define P1MD_2_XDMR1		0x0030	/* DMA request input 1 mode */
+#define P1MD_3			0x00c0
+#define P1MD_3_IN		0x0000
+#define P1MD_3_OUT		0x0040
+#define P1MD_3_TM10IO		0x0080	/* timer 10 I/O mode */
+#define P1MD_3_FRQS0		0x00c0	/* CPU clock multiplier setting input 0 mode */
+#define P1MD_4			0x0300
+#define P1MD_4_IN		0x0000
+#define P1MD_4_OUT		0x0100
+#define P1MD_4_TM11IO		0x0200	/* timer 11 I/O mode */
+#define P1MD_4_FRQS1		0x0300	/* CPU clock multiplier setting input 1 mode */
+
+#define	P1IN			__SYSREG(0xdb000104, u8)	/* in reg */
+#define	P1OUT			__SYSREG(0xdb000108, u8)	/* out reg */
+#define	P1TMIO			__SYSREG(0xdb00010c, u8)	/* TM pin I/O control reg */
+#define P1TMIO_TM11_IN		0x00
+#define P1TMIO_TM11_OUT		0x01
+#define P1TMIO_TM10_IN		0x00
+#define P1TMIO_TM10_OUT		0x02
+#define P1TMIO_TM9_IN		0x00
+#define P1TMIO_TM9_OUT		0x04
+#define P1TMIO_TM8_IN		0x00
+#define P1TMIO_TM8_OUT		0x08
+#define P1TMIO_TM7_IN		0x00
+#define P1TMIO_TM7_OUT		0x10
+
+/* I/O port 2 */
+#define	P2MD			__SYSREG(0xdb000200, u16)	/* mode reg */
+#define P2MD_0			0x0003	/* mask */
+#define P2MD_0_IN		0x0000	/* input mode */
+#define P2MD_0_OUT		0x0001	/* output mode */
+#define P2MD_0_BOOTBW		0x0003	/* boot bus width selector mode */
+#define P2MD_1			0x000c
+#define P2MD_1_IN		0x0000
+#define P2MD_1_OUT		0x0004
+#define P2MD_1_BOOTSEL		0x000c	/* boot device selector mode */
+#define P2MD_2			0x0030
+#define P2MD_2_IN		0x0000
+#define P2MD_2_OUT		0x0010
+#define P2MD_3			0x00c0
+#define P2MD_3_IN		0x0000
+#define P2MD_3_OUT		0x0040
+#define P2MD_3_CKIO		0x00c0	/* mode */
+#define P2MD_4			0x0300
+#define P2MD_4_IN		0x0000
+#define P2MD_4_OUT		0x0100
+#define P2MD_4_CMOD		0x0300	/* mode */
+
+#define	P2IN			__SYSREG(0xdb000204, u8)	/* in reg */
+#define	P2OUT			__SYSREG(0xdb000208, u8)	/* out reg */
+#define	P2TMIO			__SYSREG(0xdb00020c, u8)	/* TM pin I/O control reg */
+
+/* I/O port 3 */
+#define	P3MD			__SYSREG(0xdb000300, u16)	/* mode reg */
+#define P3MD_0			0x0003	/* mask */
+#define P3MD_0_IN		0x0000	/* input mode */
+#define P3MD_0_OUT		0x0001	/* output mode */
+#define P3MD_0_AFRXD		0x0002	/* AFR interface mode */
+#define P3MD_1			0x000c
+#define P3MD_1_IN		0x0000
+#define P3MD_1_OUT		0x0004
+#define P3MD_1_AFTXD		0x0008	/* AFR interface mode */
+#define P3MD_2			0x0030
+#define P3MD_2_IN		0x0000
+#define P3MD_2_OUT		0x0010
+#define P3MD_2_AFSCLK		0x0020	/* AFR interface mode */
+#define P3MD_3			0x00c0
+#define P3MD_3_IN		0x0000
+#define P3MD_3_OUT		0x0040
+#define P3MD_3_AFFS		0x0080	/* AFR interface mode */
+#define P3MD_4			0x0300
+#define P3MD_4_IN		0x0000
+#define P3MD_4_OUT		0x0100
+#define P3MD_4_AFEHC		0x0200	/* AFR interface mode */
+
+#define	P3IN			__SYSREG(0xdb000304, u8)	/* in reg */
+#define	P3OUT			__SYSREG(0xdb000308, u8)	/* out reg */
+
+/* I/O port 4 */
+#define	P4MD			__SYSREG(0xdb000400, u16)	/* mode reg */
+#define P4MD_0			0x0003	/* mask */
+#define P4MD_0_IN		0x0000	/* input mode */
+#define P4MD_0_OUT		0x0001	/* output mode */
+#define P4MD_0_SCL0		0x0002	/* I2C/serial mode */
+#define P4MD_1			0x000c
+#define P4MD_1_IN		0x0000
+#define P4MD_1_OUT		0x0004
+#define P4MD_1_SDA0		0x0008
+#define P4MD_2			0x0030
+#define P4MD_2_IN		0x0000
+#define P4MD_2_OUT		0x0010
+#define P4MD_2_SCL1		0x0020
+#define P4MD_3			0x00c0
+#define P4MD_3_IN		0x0000
+#define P4MD_3_OUT		0x0040
+#define P4MD_3_SDA1		0x0080
+#define P4MD_4			0x0300
+#define P4MD_4_IN		0x0000
+#define P4MD_4_OUT		0x0100
+#define P4MD_4_SBO0		0x0200
+#define P4MD_5			0x0c00
+#define P4MD_5_IN		0x0000
+#define P4MD_5_OUT		0x0400
+#define P4MD_5_SBO1		0x0800
+#define P4MD_6			0x3000
+#define P4MD_6_IN		0x0000
+#define P4MD_6_OUT		0x1000
+#define P4MD_6_SBT0		0x2000
+#define P4MD_7			0xc000
+#define P4MD_7_IN		0x0000
+#define P4MD_7_OUT		0x4000
+#define P4MD_7_SBT1		0x8000
+
+#define	P4IN			__SYSREG(0xdb000404, u8)	/* in reg */
+#define	P4OUT			__SYSREG(0xdb000408, u8)	/* out reg */
+
+/* I/O port 5 */
+#define	P5MD			__SYSREG(0xdb000500, u16)	/* mode reg */
+#define P5MD_0			0x0003	/* mask */
+#define P5MD_0_IN		0x0000	/* input mode */
+#define P5MD_0_OUT		0x0001	/* output mode */
+#define P5MD_0_IRTXD		0x0002	/* IrDA mode */
+#define P5MD_0_SOUT		0x0004	/* serial mode */
+#define P5MD_1			0x000c
+#define P5MD_1_IN		0x0000
+#define P5MD_1_OUT		0x0004
+#define P5MD_1_IRRXDS		0x0008	/* IrDA mode */
+#define P5MD_1_SIN		0x000c	/* serial mode */
+#define P5MD_2			0x0030
+#define P5MD_2_IN		0x0000
+#define P5MD_2_OUT		0x0010
+#define P5MD_2_IRRXDF		0x0020	/* IrDA mode */
+
+#define	P5IN			__SYSREG(0xdb000504, u8)	/* in reg */
+#define	P5OUT			__SYSREG(0xdb000508, u8)	/* out reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PIO_REGS_H */
diff --git a/arch/mn10300/include/asm/poll.h b/arch/mn10300/include/asm/poll.h
new file mode 100644
index 0000000..c98509d
--- /dev/null
+++ b/arch/mn10300/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/mn10300/include/asm/posix_types.h b/arch/mn10300/include/asm/posix_types.h
new file mode 100644
index 0000000..077567c
--- /dev/null
+++ b/arch/mn10300/include/asm/posix_types.h
@@ -0,0 +1,132 @@
+/* MN10300 POSIX types
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef	__FD_CLR
+static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef	__FD_ISSET
+static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef	__FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* _ASM_POSIX_TYPES_H */
diff --git a/arch/mn10300/include/asm/proc-mn103e010/cache.h b/arch/mn10300/include/asm/proc-mn103e010/cache.h
new file mode 100644
index 0000000..bdc1f9a
--- /dev/null
+++ b/arch/mn10300/include/asm/proc-mn103e010/cache.h
@@ -0,0 +1,33 @@
+/* MN103E010 Cache specification
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CACHE_H
+#define _ASM_PROC_CACHE_H
+
+/* L1 cache */
+
+#define L1_CACHE_NWAYS		4	/* number of ways in caches */
+#define L1_CACHE_NENTRIES	256	/* number of entries in each way */
+#define L1_CACHE_BYTES		16	/* bytes per entry */
+#define L1_CACHE_SHIFT		4	/* shift for bytes per entry */
+#define L1_CACHE_WAYDISP	0x1000	/* displacement of one way from the next */
+
+#define L1_CACHE_TAG_VALID	0x00000001	/* cache tag valid bit */
+#define L1_CACHE_TAG_DIRTY	0x00000008	/* data cache tag dirty bit */
+#define L1_CACHE_TAG_ENTRY	0x00000ff0	/* cache tag entry address mask */
+#define L1_CACHE_TAG_ADDRESS	0xfffff000	/* cache tag line address mask */
+
+/*
+ * specification of the interval between interrupt checking intervals whilst
+ * managing the cache with the interrupts disabled
+ */
+#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL	4
+
+#endif /* _ASM_PROC_CACHE_H */
diff --git a/arch/mn10300/include/asm/proc-mn103e010/clock.h b/arch/mn10300/include/asm/proc-mn103e010/clock.h
new file mode 100644
index 0000000..caf9983
--- /dev/null
+++ b/arch/mn10300/include/asm/proc-mn103e010/clock.h
@@ -0,0 +1,18 @@
+/* MN103E010-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CLOCK_H
+#define _ASM_PROC_CLOCK_H
+
+#include <asm/unit/clock.h>
+
+#define MN10300_WDCLK		MN10300_IOCLK
+
+#endif /* _ASM_PROC_CLOCK_H */
diff --git a/arch/mn10300/include/asm/proc-mn103e010/irq.h b/arch/mn10300/include/asm/proc-mn103e010/irq.h
new file mode 100644
index 0000000..aa6ee8f
--- /dev/null
+++ b/arch/mn10300/include/asm/proc-mn103e010/irq.h
@@ -0,0 +1,34 @@
+/* MN103E010 On-board interrupt controller numbers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_IRQ_H
+#define _ASM_PROC_IRQ_H
+
+#ifdef __KERNEL__
+
+#define GxICR_NUM_IRQS		42
+
+#define GxICR_NUM_XIRQS		8
+
+#define XIRQ0		34
+#define XIRQ1		35
+#define XIRQ2		36
+#define XIRQ3		37
+#define XIRQ4		38
+#define XIRQ5		39
+#define XIRQ6		40
+#define XIRQ7		41
+
+#define XIRQ2IRQ(num)	(XIRQ0 + num)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PROC_IRQ_H */
diff --git a/arch/mn10300/include/asm/proc-mn103e010/proc.h b/arch/mn10300/include/asm/proc-mn103e010/proc.h
new file mode 100644
index 0000000..22a2b93
--- /dev/null
+++ b/arch/mn10300/include/asm/proc-mn103e010/proc.h
@@ -0,0 +1,18 @@
+/* MN103E010 Processor description
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_PROC_H
+#define _ASM_PROC_PROC_H
+
+#define PROCESSOR_VENDOR_NAME	"Matsushita"
+#define PROCESSOR_MODEL_NAME	"mn103e010"
+
+#endif /* _ASM_PROC_PROC_H */
diff --git a/arch/mn10300/include/asm/processor.h b/arch/mn10300/include/asm/processor.h
new file mode 100644
index 0000000..7323927
--- /dev/null
+++ b/arch/mn10300/include/asm/processor.h
@@ -0,0 +1,186 @@
+/* MN10300 Processor specifics
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/cpu-regs.h>
+#include <linux/threads.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr()			\
+({						\
+	void *__pc;				\
+	asm("mov pc,%0" : "=a"(__pc));		\
+	__pc;					\
+})
+
+extern void show_registers(struct pt_regs *regs);
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+struct mn10300_cpuinfo {
+	int		type;
+	unsigned long	loops_per_sec;
+	char		hard_math;
+	unsigned long	*pgd_quick;
+	unsigned long	*pte_quick;
+	unsigned long	pgtable_cache_sz;
+};
+
+extern struct mn10300_cpuinfo boot_cpu_data;
+
+#define cpu_data &boot_cpu_data
+#define current_cpu_data boot_cpu_data
+
+extern void identify_cpu(struct mn10300_cpuinfo *);
+extern void print_cpu_info(struct mn10300_cpuinfo *);
+extern void dodgy_tsc(void);
+#define cpu_relax() barrier()
+
+/*
+ * User space process size: 1.75GB (default).
+ */
+#define TASK_SIZE		0x70000000
+
+/*
+ * Where to put the userspace stack by default
+ */
+#define STACK_TOP		0x70000000
+#define STACK_TOP_MAX		STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	0x30000000
+
+typedef struct {
+	unsigned long	seg;
+} mm_segment_t;
+
+struct fpu_state_struct {
+	unsigned long	fs[32];		/* fpu registers */
+	unsigned long	fpcr;		/* fpu control register */
+};
+
+struct thread_struct {
+	struct pt_regs		*uregs;		/* userspace register frame */
+	unsigned long		pc;		/* kernel PC */
+	unsigned long		sp;		/* kernel SP */
+	unsigned long		a3;		/* kernel FP */
+	unsigned long		wchan;
+	unsigned long		usp;
+	struct pt_regs		*__frame;
+	unsigned long		fpu_flags;
+#define THREAD_USING_FPU	0x00000001	/* T if this task is using the FPU */
+	struct fpu_state_struct	fpu_state;
+};
+
+#define INIT_THREAD				\
+{						\
+	.uregs		= init_uregs,		\
+	.pc		= 0,			\
+	.sp		= 0,			\
+	.a3		= 0,			\
+	.wchan		= 0,			\
+	.__frame	= NULL,			\
+}
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \
+  NULL, NULL }
+
+/*
+ * do necessary setup to start up a newly executed thread
+ * - need to discard the frame stacked by the kernel thread invoking the execve
+ *   syscall (see RESTORE_ALL macro)
+ */
+#define start_thread(regs, new_pc, new_sp) do {		\
+	set_fs(USER_DS);				\
+	__frame = current->thread.uregs;		\
+	__frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM;	\
+	__frame->pc = new_pc;				\
+	__frame->sp = new_sp;				\
+} while (0)
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define task_pt_regs(task)						\
+({									\
+       struct pt_regs *__regs__;					\
+       __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \
+       __regs__ - 1;							\
+})
+
+#define KSTK_EIP(task) (task_pt_regs(task)->pc)
+#define KSTK_ESP(task) (task_pt_regs(task)->sp)
+
+#define KSTK_TOP(info)				\
+({						\
+	(unsigned long)(info) + THREAD_SIZE;	\
+})
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+
+static inline void prefetch(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+	asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+	asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+static inline void prefetchw(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+	asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+	asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+#endif /* _ASM_PROCESSOR_H */
diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h
new file mode 100644
index 0000000..7b06cc6
--- /dev/null
+++ b/arch/mn10300/include/asm/ptrace.h
@@ -0,0 +1,103 @@
+/* MN10300 Exception frame layout and ptrace constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#define PT_A3		0
+#define PT_A2		1
+#define PT_D3		2
+#define	PT_D2		3
+#define PT_MCVF		4
+#define	PT_MCRL		5
+#define PT_MCRH		6
+#define	PT_MDRQ		7
+#define	PT_E1		8
+#define	PT_E0		9
+#define	PT_E7		10
+#define	PT_E6		11
+#define	PT_E5		12
+#define	PT_E4		13
+#define	PT_E3		14
+#define	PT_E2		15
+#define	PT_SP		16
+#define	PT_LAR		17
+#define	PT_LIR		18
+#define	PT_MDR		19
+#define	PT_A1		20
+#define	PT_A0		21
+#define	PT_D1		22
+#define	PT_D0		23
+#define PT_ORIG_D0	24
+#define	PT_EPSW		25
+#define	PT_PC		26
+#define NR_PTREGS	27
+
+#ifndef __ASSEMBLY__
+/*
+ * This defines the way registers are stored in the event of an exception
+ * - the strange order is due to the MOVM instruction
+ */
+struct pt_regs {
+	unsigned long		a3;		/* syscall arg 3 */
+	unsigned long		a2;		/* syscall arg 4 */
+	unsigned long		d3;		/* syscall arg 5 */
+	unsigned long		d2;		/* syscall arg 6 */
+	unsigned long		mcvf;
+	unsigned long		mcrl;
+	unsigned long		mcrh;
+	unsigned long		mdrq;
+	unsigned long		e1;
+	unsigned long		e0;
+	unsigned long		e7;
+	unsigned long		e6;
+	unsigned long		e5;
+	unsigned long		e4;
+	unsigned long		e3;
+	unsigned long		e2;
+	unsigned long		sp;
+	unsigned long		lar;
+	unsigned long		lir;
+	unsigned long		mdr;
+	unsigned long		a1;
+	unsigned long		a0;		/* syscall arg 1 */
+	unsigned long		d1;		/* syscall arg 2 */
+	unsigned long		d0;		/* syscall ret */
+	struct pt_regs		*next;		/* next frame pointer */
+	unsigned long		orig_d0;	/* syscall number */
+	unsigned long		epsw;
+	unsigned long		pc;
+};
+#endif
+
+extern struct pt_regs *__frame; /* current frame pointer */
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD     0x00000001
+
+#if defined(__KERNEL__)
+
+#if !defined(__ASSEMBLY__)
+#define user_mode(regs)			(((regs)->epsw & EPSW_nSL) == EPSW_nSL)
+#define instruction_pointer(regs)	((regs)->pc)
+extern void show_regs(struct pt_regs *);
+#endif  /*  !__ASSEMBLY  */
+
+#define profile_pc(regs) ((regs)->pc)
+
+#endif  /*  __KERNEL__  */
+
+#endif /* _ASM_PTRACE_H */
diff --git a/arch/mn10300/include/asm/reset-regs.h b/arch/mn10300/include/asm/reset-regs.h
new file mode 100644
index 0000000..174523d
--- /dev/null
+++ b/arch/mn10300/include/asm/reset-regs.h
@@ -0,0 +1,64 @@
+/* MN10300 Reset controller and watchdog timer definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_RESET_REGS_H
+#define _ASM_RESET_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_MN10300_WD_TIMER
+#define ARCH_HAS_NMI_WATCHDOG		/* See include/linux/nmi.h */
+#endif
+
+/*
+ * watchdog timer registers
+ */
+#define WDBC			__SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */
+
+#define WDCTR			__SYSREG(0xc0001002, u8)  /* watchdog timer control reg */
+#define WDCTR_WDCK		0x07	/* clock source selection */
+#define WDCTR_WDCK_256th	0x00	/* - OSCI/256 */
+#define WDCTR_WDCK_1024th	0x01	/* - OSCI/1024 */
+#define WDCTR_WDCK_2048th	0x02	/* - OSCI/2048 */
+#define WDCTR_WDCK_16384th	0x03	/* - OSCI/16384 */
+#define WDCTR_WDCK_65536th	0x04	/* - OSCI/65536 */
+#define WDCTR_WDRST		0x40	/* binary counter reset */
+#define WDCTR_WDCNE		0x80	/* watchdog timer enable */
+
+#define RSTCTR			__SYSREG(0xc0001004, u8) /* reset control reg */
+#define RSTCTR_CHIPRST		0x01	/* chip reset */
+#define RSTCTR_DBFRST		0x02	/* double fault reset flag */
+#define RSTCTR_WDTRST		0x04	/* watchdog timer reset flag */
+#define RSTCTR_WDREN		0x08	/* watchdog timer reset enable */
+
+#ifndef __ASSEMBLY__
+
+static inline void mn10300_proc_hard_reset(void)
+{
+	RSTCTR &= ~RSTCTR_CHIPRST;
+	RSTCTR |= RSTCTR_CHIPRST;
+}
+
+extern unsigned int watchdog_alert_counter;
+
+extern void watchdog_go(void);
+extern asmlinkage void watchdog_handler(void);
+extern asmlinkage
+void watchdog_interrupt(struct pt_regs *, enum exception_code);
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RESET_REGS_H */
diff --git a/arch/mn10300/include/asm/resource.h b/arch/mn10300/include/asm/resource.h
new file mode 100644
index 0000000..04bc4db
--- /dev/null
+++ b/arch/mn10300/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/arch/mn10300/include/asm/rtc-regs.h b/arch/mn10300/include/asm/rtc-regs.h
new file mode 100644
index 0000000..c42deef
--- /dev/null
+++ b/arch/mn10300/include/asm/rtc-regs.h
@@ -0,0 +1,86 @@
+/* MN10300 on-chip Real-Time Clock registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_REGS_H
+#define _ASM_RTC_REGS_H
+
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+#define RTSCR			__SYSREG(0xd8600000, u8) /* RTC seconds count reg */
+#define RTSAR			__SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */
+#define RTMCR			__SYSREG(0xd8600002, u8) /* RTC minutes count reg */
+#define RTMAR			__SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */
+#define RTHCR			__SYSREG(0xd8600004, u8) /* RTC hours count reg */
+#define RTHAR			__SYSREG(0xd8600005, u8) /* RTC hours alarm reg */
+#define RTDWCR			__SYSREG(0xd8600006, u8) /* RTC day of the week count reg */
+#define RTDMCR			__SYSREG(0xd8600007, u8) /* RTC days count reg */
+#define RTMTCR			__SYSREG(0xd8600008, u8) /* RTC months count reg */
+#define RTYCR			__SYSREG(0xd8600009, u8) /* RTC years count reg */
+
+#define RTCRA			__SYSREG(0xd860000a, u8)/* RTC control reg A */
+#define RTCRA_RS		0x0f	/* periodic timer interrupt cycle setting */
+#define RTCRA_RS_NONE		0x00	/* - off */
+#define RTCRA_RS_3_90625ms	0x01	/* - 3.90625ms	(1/256s) */
+#define RTCRA_RS_7_8125ms	0x02	/* - 7.8125ms	(1/128s) */
+#define RTCRA_RS_122_070us	0x03	/* - 122.070us	(1/8192s) */
+#define RTCRA_RS_244_141us	0x04	/* - 244.141us	(1/4096s) */
+#define RTCRA_RS_488_281us	0x05	/* - 488.281us	(1/2048s) */
+#define RTCRA_RS_976_5625us	0x06	/* - 976.5625us	(1/1024s) */
+#define RTCRA_RS_1_953125ms	0x07	/* - 1.953125ms	(1/512s) */
+#define RTCRA_RS_3_90624ms	0x08	/* - 3.90624ms	(1/256s) */
+#define RTCRA_RS_7_8125ms_b	0x09	/* - 7.8125ms	(1/128s) */
+#define RTCRA_RS_15_625ms	0x0a	/* - 15.625ms	(1/64s) */
+#define RTCRA_RS_31_25ms	0x0b	/* - 31.25ms	(1/32s) */
+#define RTCRA_RS_62_5ms		0x0c	/* - 62.5ms	(1/16s) */
+#define RTCRA_RS_125ms		0x0d	/* - 125ms	(1/8s) */
+#define RTCRA_RS_250ms		0x0e	/* - 250ms	(1/4s) */
+#define RTCRA_RS_500ms		0x0f	/* - 500ms	(1/2s) */
+#define RTCRA_DVR		0x40	/* divider reset */
+#define RTCRA_UIP		0x80	/* clock update flag */
+
+#define RTCRB			__SYSREG(0xd860000b, u8) /* RTC control reg B */
+#define RTCRB_DSE		0x01	/* daylight savings time enable */
+#define RTCRB_TM		0x02	/* time format */
+#define RTCRB_TM_12HR		0x00	/* - 12 hour format */
+#define RTCRB_TM_24HR		0x02	/* - 24 hour format */
+#define RTCRB_DM		0x04	/* numeric value format */
+#define RTCRB_DM_BCD		0x00	/* - BCD */
+#define RTCRB_DM_BINARY		0x04	/* - binary */
+#define RTCRB_UIE		0x10	/* update interrupt disable */
+#define RTCRB_AIE		0x20	/* alarm interrupt disable */
+#define RTCRB_PIE		0x40	/* periodic interrupt disable */
+#define RTCRB_SET		0x80	/* clock update enable */
+
+#define RTSRC			__SYSREG(0xd860000c, u8) /* RTC status reg C */
+#define RTSRC_UF		0x10	/* update end interrupt flag */
+#define RTSRC_AF		0x20	/* alarm interrupt flag */
+#define RTSRC_PF		0x40	/* periodic interrupt flag */
+#define RTSRC_IRQF		0x80	/* interrupt flag */
+
+#define RTIRQ			32
+#define RTICR			GxICR(RTIRQ)
+
+/*
+ * MC146818 RTC compatibility defs for the MN10300 on-chip RTC
+ */
+#define RTC_PORT(x)		0xd8600000
+#define RTC_ALWAYS_BCD		1	/* RTC operates in binary mode */
+
+#define CMOS_READ(addr)		__SYSREG(0xd8600000 + (addr), u8)
+#define CMOS_WRITE(val, addr)	\
+	do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0)
+
+#define RTC_IRQ			RTIRQ
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RTC_REGS_H */
diff --git a/arch/mn10300/include/asm/rtc.h b/arch/mn10300/include/asm/rtc.h
new file mode 100644
index 0000000..c295194
--- /dev/null
+++ b/arch/mn10300/include/asm/rtc.h
@@ -0,0 +1,41 @@
+/* MN10300 Real time clock definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+#ifdef CONFIG_MN10300_RTC
+
+#include <linux/init.h>
+
+extern void check_rtc_time(void);
+extern void __init calibrate_clock(void);
+extern unsigned long __init get_initial_rtc_time(void);
+
+#else /* !CONFIG_MN10300_RTC */
+
+static inline void check_rtc_time(void)
+{
+}
+
+static inline void calibrate_clock(void)
+{
+}
+
+static inline unsigned long get_initial_rtc_time(void)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#include <asm-generic/rtc.h>
+
+#endif /* _ASM_RTC_H */
diff --git a/arch/mn10300/include/asm/scatterlist.h b/arch/mn10300/include/asm/scatterlist.h
new file mode 100644
index 0000000..6753590
--- /dev/null
+++ b/arch/mn10300/include/asm/scatterlist.h
@@ -0,0 +1,55 @@
+/* MN10300 Scatterlist definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SCATTERLIST_H
+#define _ASM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+/*
+ * Drivers must set either ->address or (preferred) page and ->offset
+ * to indicate where data must be transferred to/from.
+ *
+ * Using page is recommended since it handles highmem data as well as
+ * low mem. ->address is restricted to data which has a virtual mapping, and
+ * it will go away in the future. Updating to page can be automated very
+ * easily -- something like
+ *
+ * sg->address = some_ptr;
+ *
+ * can be rewritten as
+ *
+ * sg_set_page(virt_to_page(some_ptr));
+ * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
+ *
+ * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
+ */
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;		/* for highmem, page offset */
+	dma_addr_t	dma_address;
+	unsigned int	length;
+};
+
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
+#endif /* _ASM_SCATTERLIST_H */
diff --git a/arch/mn10300/include/asm/sections.h b/arch/mn10300/include/asm/sections.h
new file mode 100644
index 0000000..2b8c516
--- /dev/null
+++ b/arch/mn10300/include/asm/sections.h
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/arch/mn10300/include/asm/sembuf.h b/arch/mn10300/include/asm/sembuf.h
new file mode 100644
index 0000000..301f3f9
--- /dev/null
+++ b/arch/mn10300/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_SEMBUF_H */
diff --git a/arch/mn10300/include/asm/serial-regs.h b/arch/mn10300/include/asm/serial-regs.h
new file mode 100644
index 0000000..6498469
--- /dev/null
+++ b/arch/mn10300/include/asm/serial-regs.h
@@ -0,0 +1,160 @@
+/* MN10300 on-board serial port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SERIAL_REGS_H
+#define _ASM_SERIAL_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* serial port 0 */
+#define	SC0CTR			__SYSREG(0xd4002000, u16)	/* control reg */
+#define	SC01CTR_CK		0x0007	/* clock source select */
+#define	SC0CTR_CK_TM8UFLOW_8	0x0000	/* - 1/8 timer 8 underflow (serial port 0 only) */
+#define	SC1CTR_CK_TM9UFLOW_8	0x0000	/* - 1/8 timer 9 underflow (serial port 1 only) */
+#define	SC01CTR_CK_IOCLK_8	0x0001	/* - 1/8 IOCLK */
+#define	SC01CTR_CK_IOCLK_32	0x0002	/* - 1/32 IOCLK */
+#define	SC0CTR_CK_TM2UFLOW_2	0x0003	/* - 1/2 timer 2 underflow (serial port 0 only) */
+#define	SC1CTR_CK_TM3UFLOW_2	0x0003	/* - 1/2 timer 3 underflow (serial port 1 only) */
+#define	SC0CTR_CK_TM0UFLOW_8	0x0004	/* - 1/8 timer 1 underflow (serial port 0 only) */
+#define	SC1CTR_CK_TM1UFLOW_8	0x0004	/* - 1/8 timer 2 underflow (serial port 1 only) */
+#define	SC0CTR_CK_TM2UFLOW_8	0x0005	/* - 1/8 timer 2 underflow (serial port 0 only) */
+#define	SC1CTR_CK_TM3UFLOW_8	0x0005	/* - 1/8 timer 3 underflow (serial port 1 only) */
+#define	SC01CTR_CK_EXTERN_8	0x0006	/* - 1/8 external closk */
+#define	SC01CTR_CK_EXTERN	0x0007	/* - external closk */
+#define	SC01CTR_STB		0x0008	/* stop bit select */
+#define	SC01CTR_STB_1BIT	0x0000	/* - 1 stop bit */
+#define	SC01CTR_STB_2BIT	0x0008	/* - 2 stop bits */
+#define	SC01CTR_PB		0x0070	/* parity bit select */
+#define	SC01CTR_PB_NONE		0x0000	/* - no parity */
+#define	SC01CTR_PB_FIXED0	0x0040	/* - fixed at 0 */
+#define	SC01CTR_PB_FIXED1	0x0050	/* - fixed at 1 */
+#define	SC01CTR_PB_EVEN		0x0060	/* - even parity */
+#define	SC01CTR_PB_ODD		0x0070	/* - odd parity */
+#define	SC01CTR_CLN		0x0080	/* character length */
+#define	SC01CTR_CLN_7BIT	0x0000	/* - 7 bit chars */
+#define	SC01CTR_CLN_8BIT	0x0080	/* - 8 bit chars */
+#define	SC01CTR_TOE		0x0100	/* T input output enable */
+#define	SC01CTR_OD		0x0200	/* bit order select */
+#define	SC01CTR_OD_LSBFIRST	0x0000	/* - LSB first */
+#define	SC01CTR_OD_MSBFIRST	0x0200	/* - MSB first */
+#define	SC01CTR_MD		0x0c00	/* mode select */
+#define SC01CTR_MD_STST_SYNC	0x0000	/* - start-stop synchronous */
+#define SC01CTR_MD_CLOCK_SYNC1	0x0400	/* - clock synchronous 1 */
+#define SC01CTR_MD_I2C		0x0800	/* - I2C mode */
+#define SC01CTR_MD_CLOCK_SYNC2	0x0c00	/* - clock synchronous 2 */
+#define	SC01CTR_IIC		0x1000	/* I2C mode select */
+#define	SC01CTR_BKE		0x2000	/* break transmit enable */
+#define	SC01CTR_RXE		0x4000	/* receive enable */
+#define	SC01CTR_TXE		0x8000	/* transmit enable */
+
+#define	SC0ICR			__SYSREG(0xd4002004, u8)	/* interrupt control reg */
+#define SC01ICR_DMD		0x80	/* output data mode */
+#define SC01ICR_TD		0x20	/* transmit DMA trigger cause */
+#define SC01ICR_TI		0x10	/* transmit interrupt cause */
+#define SC01ICR_RES		0x04	/* receive error select */
+#define SC01ICR_RI		0x01	/* receive interrupt cause */
+
+#define	SC0TXB			__SYSREG(0xd4002008, u8)	/* transmit buffer reg */
+#define	SC0RXB			__SYSREG(0xd4002009, u8)	/* receive buffer reg */
+
+#define	SC0STR			__SYSREG(0xd400200c, u16)	/* status reg */
+#define SC01STR_OEF		0x0001	/* overrun error found */
+#define SC01STR_PEF		0x0002	/* parity error found */
+#define SC01STR_FEF		0x0004	/* framing error found */
+#define SC01STR_RBF		0x0010	/* receive buffer status */
+#define SC01STR_TBF		0x0020	/* transmit buffer status */
+#define SC01STR_RXF		0x0040	/* receive status */
+#define SC01STR_TXF		0x0080	/* transmit status */
+#define SC01STR_STF		0x0100	/* I2C start sequence found */
+#define SC01STR_SPF		0x0200	/* I2C stop sequence found */
+
+#define SC0RXIRQ		20	/* timer 0 Receive IRQ */
+#define SC0TXIRQ		21	/* timer 0 Transmit IRQ */
+
+#define	SC0RXICR		GxICR(SC0RXIRQ)	/* serial 0 receive intr ctrl reg */
+#define	SC0TXICR		GxICR(SC0TXIRQ)	/* serial 0 transmit intr ctrl reg */
+
+/* serial port 1 */
+#define	SC1CTR			__SYSREG(0xd4002010, u16)	/* serial port 1 control */
+#define	SC1ICR			__SYSREG(0xd4002014, u8)	/* interrupt control reg */
+#define	SC1TXB			__SYSREG(0xd4002018, u8)	/* transmit buffer reg */
+#define	SC1RXB			__SYSREG(0xd4002019, u8)	/* receive buffer reg */
+#define	SC1STR			__SYSREG(0xd400201c, u16)	/* status reg */
+
+#define SC1RXIRQ		22	/* timer 1 Receive IRQ */
+#define SC1TXIRQ		23	/* timer 1 Transmit IRQ */
+
+#define	SC1RXICR		GxICR(SC1RXIRQ)	/* serial 1 receive intr ctrl reg */
+#define	SC1TXICR		GxICR(SC1TXIRQ)	/* serial 1 transmit intr ctrl reg */
+
+/* serial port 2 */
+#define	SC2CTR			__SYSREG(0xd4002020, u16)	/* control reg */
+#define	SC2CTR_CK		0x0003	/* clock source select */
+#define	SC2CTR_CK_TM10UFLOW	0x0000	/* - timer 10 underflow */
+#define	SC2CTR_CK_TM2UFLOW	0x0001	/* - timer 2 underflow */
+#define	SC2CTR_CK_EXTERN	0x0002	/* - external closk */
+#define	SC2CTR_CK_TM3UFLOW	0x0003	/* - timer 3 underflow */
+#define	SC2CTR_STB		0x0008	/* stop bit select */
+#define	SC2CTR_STB_1BIT		0x0000	/* - 1 stop bit */
+#define	SC2CTR_STB_2BIT		0x0008	/* - 2 stop bits */
+#define	SC2CTR_PB		0x0070	/* parity bit select */
+#define	SC2CTR_PB_NONE		0x0000	/* - no parity */
+#define	SC2CTR_PB_FIXED0	0x0040	/* - fixed at 0 */
+#define	SC2CTR_PB_FIXED1	0x0050	/* - fixed at 1 */
+#define	SC2CTR_PB_EVEN		0x0060	/* - even parity */
+#define	SC2CTR_PB_ODD		0x0070	/* - odd parity */
+#define	SC2CTR_CLN		0x0080	/* character length */
+#define	SC2CTR_CLN_7BIT		0x0000	/* - 7 bit chars */
+#define	SC2CTR_CLN_8BIT		0x0080	/* - 8 bit chars */
+#define	SC2CTR_TWE		0x0100	/* transmit wait enable (enable XCTS control) */
+#define	SC2CTR_OD		0x0200	/* bit order select */
+#define	SC2CTR_OD_LSBFIRST	0x0000	/* - LSB first */
+#define	SC2CTR_OD_MSBFIRST	0x0200	/* - MSB first */
+#define	SC2CTR_TWS		0x1000	/* transmit wait select */
+#define	SC2CTR_TWS_XCTS_HIGH	0x0000	/* - interrupt TX when XCTS high */
+#define	SC2CTR_TWS_XCTS_LOW	0x1000	/* - interrupt TX when XCTS low */
+#define	SC2CTR_BKE		0x2000	/* break transmit enable */
+#define	SC2CTR_RXE		0x4000	/* receive enable */
+#define	SC2CTR_TXE		0x8000	/* transmit enable */
+
+#define	SC2ICR			__SYSREG(0xd4002024, u8)	/* interrupt control reg */
+#define SC2ICR_TD		0x20	/* transmit DMA trigger cause */
+#define SC2ICR_TI		0x10	/* transmit interrupt cause */
+#define SC2ICR_RES		0x04	/* receive error select */
+#define SC2ICR_RI		0x01	/* receive interrupt cause */
+
+#define	SC2TXB			__SYSREG(0xd4002018, u8)	/* transmit buffer reg */
+#define	SC2RXB			__SYSREG(0xd4002019, u8)	/* receive buffer reg */
+#define	SC2STR			__SYSREG(0xd400201c, u8)	/* status reg */
+#define SC2STR_OEF		0x0001	/* overrun error found */
+#define SC2STR_PEF		0x0002	/* parity error found */
+#define SC2STR_FEF		0x0004	/* framing error found */
+#define SC2STR_CTS		0x0008	/* XCTS input pin status (0 means high) */
+#define SC2STR_RBF		0x0010	/* receive buffer status */
+#define SC2STR_TBF		0x0020	/* transmit buffer status */
+#define SC2STR_RXF		0x0040	/* receive status */
+#define SC2STR_TXF		0x0080	/* transmit status */
+
+#define	SC2TIM			__SYSREG(0xd400202d, u8)	/* status reg */
+
+#define SC2RXIRQ		24	/* serial 2 Receive IRQ */
+#define SC2TXIRQ		25	/* serial 2 Transmit IRQ */
+
+#define	SC2RXICR		GxICR(SC2RXIRQ)	/* serial 2 receive intr ctrl reg */
+#define	SC2TXICR		GxICR(SC2TXIRQ)	/* serial 2 transmit intr ctrl reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SERIAL_REGS_H */
diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h
new file mode 100644
index 0000000..99785a9
--- /dev/null
+++ b/arch/mn10300/include/asm/serial.h
@@ -0,0 +1,36 @@
+/* Standard UART definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * The ASB2305 has an 18.432 MHz clock the UART
+ */
+#define BASE_BAUD	(18432000 / 16)
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS	(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS	ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS	ASYNC_FOURPORT
+#define ACCENT_FLAGS	0
+#define BOCA_FLAGS	0
+#define HUB6_FLAGS	0
+#define RS_TABLE_SIZE	64
+#else
+#define RS_TABLE_SIZE
+#endif
+
+#include <asm/unit/serial.h>
diff --git a/arch/mn10300/include/asm/setup.h b/arch/mn10300/include/asm/setup.h
new file mode 100644
index 0000000..08356c8
--- /dev/null
+++ b/arch/mn10300/include/asm/setup.h
@@ -0,0 +1,17 @@
+/* MN10300 Setup declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+extern void __init unit_setup(void);
+extern void __init unit_init_IRQ(void);
+
+#endif /* _ASM_SETUP_H */
diff --git a/arch/mn10300/include/asm/shmbuf.h b/arch/mn10300/include/asm/shmbuf.h
new file mode 100644
index 0000000..8f300cc
--- /dev/null
+++ b/arch/mn10300/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
diff --git a/arch/mn10300/include/asm/shmparam.h b/arch/mn10300/include/asm/shmparam.h
new file mode 100644
index 0000000..ab666ed
--- /dev/null
+++ b/arch/mn10300/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
diff --git a/arch/mn10300/include/asm/sigcontext.h b/arch/mn10300/include/asm/sigcontext.h
new file mode 100644
index 0000000..4de3aff
--- /dev/null
+++ b/arch/mn10300/include/asm/sigcontext.h
@@ -0,0 +1,52 @@
+/* MN10300 Userspace signal context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+struct fpucontext {
+	/* Regular FPU environment */
+	unsigned long	fs[32];		/* fpu registers */
+	unsigned long	fpcr;		/* fpu control register */
+};
+
+struct sigcontext {
+	unsigned long	d0;
+	unsigned long	d1;
+	unsigned long	d2;
+	unsigned long	d3;
+	unsigned long	a0;
+	unsigned long	a1;
+	unsigned long	a2;
+	unsigned long	a3;
+	unsigned long	e0;
+	unsigned long	e1;
+	unsigned long	e2;
+	unsigned long	e3;
+	unsigned long	e4;
+	unsigned long	e5;
+	unsigned long	e6;
+	unsigned long	e7;
+	unsigned long	lar;
+	unsigned long	lir;
+	unsigned long	mdr;
+	unsigned long	mcvf;
+	unsigned long	mcrl;
+	unsigned long	mcrh;
+	unsigned long	mdrq;
+	unsigned long	sp;
+	unsigned long	epsw;
+	unsigned long	pc;
+	struct fpucontext *fpucontext;
+	unsigned long	oldmask;
+};
+
+
+#endif /* _ASM_SIGCONTEXT_H */
diff --git a/arch/mn10300/include/asm/siginfo.h b/arch/mn10300/include/asm/siginfo.h
new file mode 100644
index 0000000..0815d29
--- /dev/null
+++ b/arch/mn10300/include/asm/siginfo.h
@@ -0,0 +1 @@
+#include <asm-generic/siginfo.h>
diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h
new file mode 100644
index 0000000..e98817c
--- /dev/null
+++ b/arch/mn10300/include/asm/signal.h
@@ -0,0 +1,171 @@
+/* MN10300 Signal definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long	sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	(_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001U
+#define SA_NOCLDWAIT	0x00000002U
+#define SA_SIGINFO	0x00000004U
+#define SA_ONSTACK	0x08000000U
+#define SA_RESTART	0x10000000U
+#define SA_NODEFER	0x40000000U
+#define SA_RESETHAND	0x80000000U
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user	*ss_sp;
+	int		ss_flags;
+	size_t		ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+
+struct pt_regs;
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
diff --git a/arch/mn10300/include/asm/smp.h b/arch/mn10300/include/asm/smp.h
new file mode 100644
index 0000000..4eb8c61
--- /dev/null
+++ b/arch/mn10300/include/asm/smp.h
@@ -0,0 +1,18 @@
+/* MN10300 SMP support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SMP_H
+#define _ASM_SMP_H
+
+#ifdef CONFIG_SMP
+#error SMP not yet supported for MN10300
+#endif
+
+#endif
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
new file mode 100644
index 0000000..fb5daf4
--- /dev/null
+++ b/arch/mn10300/include/asm/socket.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#define SO_TIMESTAMPING		37
+#define SCM_TIMESTAMPING	SO_TIMESTAMPING
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/mn10300/include/asm/sockios.h b/arch/mn10300/include/asm/sockios.h
new file mode 100644
index 0000000..b03043a
--- /dev/null
+++ b/arch/mn10300/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SOCKIOS_H
+#define _ASM_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS_H */
diff --git a/arch/mn10300/include/asm/spinlock.h b/arch/mn10300/include/asm/spinlock.h
new file mode 100644
index 0000000..4bf9c8b
--- /dev/null
+++ b/arch/mn10300/include/asm/spinlock.h
@@ -0,0 +1,16 @@
+/* MN10300 spinlock support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#error SMP spinlocks not implemented for MN10300
+
+#endif /* _ASM_SPINLOCK_H */
diff --git a/arch/mn10300/include/asm/stat.h b/arch/mn10300/include/asm/stat.h
new file mode 100644
index 0000000..63ff837
--- /dev/null
+++ b/arch/mn10300/include/asm/stat.h
@@ -0,0 +1,78 @@
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned long  st_dev;
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned long  st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#define STAT_HAVE_NSEC 1
+
+#endif /* _ASM_STAT_H */
diff --git a/arch/mn10300/include/asm/statfs.h b/arch/mn10300/include/asm/statfs.h
new file mode 100644
index 0000000..0b91fe1
--- /dev/null
+++ b/arch/mn10300/include/asm/statfs.h
@@ -0,0 +1 @@
+#include <asm-generic/statfs.h>
diff --git a/arch/mn10300/include/asm/string.h b/arch/mn10300/include/asm/string.h
new file mode 100644
index 0000000..47dbd43
--- /dev/null
+++ b/arch/mn10300/include/asm/string.h
@@ -0,0 +1,32 @@
+/* MN10300 Optimised string functions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_STRING_H
+#define _ASM_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memset(void *dest, int ch, size_t count);
+extern void *memcpy(void *dest, const void *src, size_t count);
+extern void *memmove(void *dest, const void *src, size_t count);
+
+
+extern void __struct_cpy_bug(void);
+#define struct_cpy(x, y)			\
+({                                              \
+	if (sizeof(*(x)) != sizeof(*(y)))       \
+		__struct_cpy_bug;               \
+	memcpy(x, y, sizeof(*(x)));             \
+})
+
+#endif /* _ASM_STRING_H */
diff --git a/arch/mn10300/include/asm/swab.h b/arch/mn10300/include/asm/swab.h
new file mode 100644
index 0000000..bd818a8
--- /dev/null
+++ b/arch/mn10300/include/asm/swab.h
@@ -0,0 +1,42 @@
+/* MN10300 Byte-order primitive construction
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+
+#include <linux/types.h>
+
+#ifdef __GNUC__
+
+static inline __attribute__((const))
+__u32 __arch_swab32(__u32 x)
+{
+	__u32 ret;
+	asm("swap %1,%0" : "=r" (ret) : "r" (x));
+	return ret;
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __attribute__((const))
+__u16 __arch_swab16(__u16 x)
+{
+	__u16 ret;
+	asm("swaph %1,%0" : "=r" (ret) : "r" (x));
+	return ret;
+}
+#define __arch_swab32 __arch_swab32
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#endif /* _ASM_SWAB_H */
diff --git a/arch/mn10300/include/asm/system.h b/arch/mn10300/include/asm/system.h
new file mode 100644
index 0000000..8214fb7
--- /dev/null
+++ b/arch/mn10300/include/asm/system.h
@@ -0,0 +1,237 @@
+/* MN10300 System definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+
+struct task_struct;
+struct thread_struct;
+
+extern asmlinkage
+struct task_struct *__switch_to(struct thread_struct *prev,
+				struct thread_struct *next,
+				struct task_struct *prev_task);
+
+/* context switching is now performed out-of-line in switch_to.S */
+#define switch_to(prev, next, last)					\
+do {									\
+	current->thread.wchan = (u_long) __builtin_return_address(0);	\
+	(last) = __switch_to(&(prev)->thread, &(next)->thread, (prev));	\
+	mb();								\
+	current->thread.wchan = 0;					\
+} while (0)
+
+#define arch_align_stack(x) (x)
+
+#define nop() asm volatile ("nop")
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * For now, "wmb()" doesn't actually do anything, as all
+ * Intel CPU's follow what Intel calls a *Processor Order*,
+ * in which all writes are seen in the program order even
+ * outside the CPU.
+ *
+ * I expect future Intel CPU's to have a weaker ordering,
+ * but I'd also expect them to finally get their act together
+ * and add some real memory barriers if so.
+ *
+ * Some non intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+
+#define mb()	asm volatile ("": : :"memory")
+#define rmb()	mb()
+#define wmb()	asm volatile ("": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#endif
+
+#define set_mb(var, value)  do { var = value;  mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define read_barrier_depends()		do {} while (0)
+#define smp_read_barrier_depends()	do {} while (0)
+
+/*****************************************************************************/
+/*
+ * interrupt control
+ * - "disabled": run in IM1/2
+ *   - level 0 - GDB stub
+ *   - level 1 - virtual serial DMA (if present)
+ *   - level 5 - normal interrupt priority
+ *   - level 6 - timer interrupt
+ * - "enabled":  run in IM7
+ */
+#ifdef CONFIG_MN10300_TTYSM
+#define MN10300_CLI_LEVEL	EPSW_IM_2
+#else
+#define MN10300_CLI_LEVEL	EPSW_IM_1
+#endif
+
+#define local_save_flags(x)			\
+do {						\
+	typecheck(unsigned long, x);		\
+	asm volatile(				\
+		"	mov epsw,%0	\n"	\
+		: "=d"(x)			\
+		);				\
+} while (0)
+
+#define local_irq_disable()						\
+do {									\
+	asm volatile(							\
+		"	and %0,epsw	\n"				\
+		"	or %1,epsw	\n"				\
+		"	nop		\n"				\
+		"	nop		\n"				\
+		"	nop		\n"				\
+		:							\
+		: "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL)	\
+		);							\
+} while (0)
+
+#define local_irq_save(x)			\
+do {						\
+	local_save_flags(x);			\
+	local_irq_disable();			\
+} while (0)
+
+/*
+ * we make sure local_irq_enable() doesn't cause priority inversion
+ */
+#ifndef __ASSEMBLY__
+
+extern unsigned long __mn10300_irq_enabled_epsw;
+
+#endif
+
+#define local_irq_enable()						\
+do {									\
+	unsigned long tmp;						\
+									\
+	asm volatile(							\
+		"	mov	epsw,%0		\n"			\
+		"	and	%1,%0		\n"			\
+		"	or	%2,%0		\n"			\
+		"	mov	%0,epsw		\n"			\
+		: "=&d"(tmp)						\
+		: "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw)	\
+		);							\
+} while (0)
+
+#define local_irq_restore(x)			\
+do {						\
+	typecheck(unsigned long, x);		\
+	asm volatile(				\
+		"	mov %0,epsw	\n"	\
+		"	nop		\n"	\
+		"	nop		\n"	\
+		"	nop		\n"	\
+		:				\
+		: "d"(x)			\
+		: "memory", "cc"		\
+		);				\
+} while (0)
+
+#define irqs_disabled()				\
+({						\
+	unsigned long flags;			\
+	local_save_flags(flags);		\
+	(flags & EPSW_IM) <= MN10300_CLI_LEVEL;	\
+})
+
+/* hook to save power by halting the CPU
+ * - called from the idle loop
+ * - must reenable interrupts (which takes three instruction cycles to complete)
+ */
+#define safe_halt()							\
+do {									\
+	asm volatile("	or	%0,epsw	\n"				\
+		     "	nop		\n"				\
+		     "	nop		\n"				\
+		     "	bset	%2,(%1)	\n"				\
+		     :							\
+		     : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\
+		     : "cc"						\
+		     );							\
+} while (0)
+
+#define STI	or EPSW_IE|EPSW_IM,epsw
+#define CLI	and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop
+
+/*****************************************************************************/
+/*
+ * MN10300 doesn't actually have an exchange instruction
+ */
+#ifndef __ASSEMBLY__
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+static inline
+unsigned long __xchg(volatile unsigned long *m, unsigned long val)
+{
+	unsigned long retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val;
+	local_irq_restore(flags);
+	return retval;
+}
+
+#define xchg(ptr, v)						\
+	((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr),	\
+				     (unsigned long)(v)))
+
+static inline unsigned long __cmpxchg(volatile unsigned long *m,
+				      unsigned long old, unsigned long new)
+{
+	unsigned long retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	if (retval == old)
+		*m = new;
+	local_irq_restore(flags);
+	return retval;
+}
+
+#define cmpxchg(ptr, o, n)					\
+	((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
+					(unsigned long)(o),	\
+					(unsigned long)(n)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SYSTEM_H */
diff --git a/arch/mn10300/include/asm/termbits.h b/arch/mn10300/include/asm/termbits.h
new file mode 100644
index 0000000..eb2b0dc
--- /dev/null
+++ b/arch/mn10300/include/asm/termbits.h
@@ -0,0 +1,200 @@
+#ifndef _ASM_TERMBITS_H
+#define _ASM_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define   BOTHER  0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CTVB	  004000000000		/* VisioBraille Terminal flow control */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _ASM_TERMBITS_H */
diff --git a/arch/mn10300/include/asm/termios.h b/arch/mn10300/include/asm/termios.h
new file mode 100644
index 0000000..dd7cf61
--- /dev/null
+++ b/arch/mn10300/include/asm/termios.h
@@ -0,0 +1,92 @@
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^|		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+#define TIOCM_MODEM_BITS       TIOCM_OUT2      /* IRDA support */
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp, &(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+	copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) \
+	copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) \
+	copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) \
+	copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* _ASM_TERMIOS_H */
diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h
new file mode 100644
index 0000000..78a3881
--- /dev/null
+++ b/arch/mn10300/include/asm/thread_info.h
@@ -0,0 +1,170 @@
+/* MN10300 Low-level thread information
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+#define PREEMPT_ACTIVE		0x10000000
+
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE		(4096)
+#else
+#define THREAD_SIZE		(8192)
+#endif
+
+#define STACK_WARN		(THREAD_SIZE / 8)
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ *   must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;		/* current CPU */
+	__s32			preempt_count;	/* 0 => preemptable, <0 => BUG */
+
+	mm_segment_t		addr_limit;	/* thread address space:
+						   0-0xBFFFFFFF for user-thead
+						   0-0xFFFFFFFF for kernel-thread
+						*/
+	struct restart_block    restart_block;
+
+	__u8			supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#endif
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+#define init_uregs							\
+	((struct pt_regs *)						\
+	 ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs)))
+
+extern struct thread_info *__current_ti;
+
+/* how to get the thread information struct from C */
+static inline __attribute__((const))
+struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+	asm("mov sp,%0\n"
+	    "and %1,%0\n"
+	    : "=d" (ti)
+	    : "i" (~(THREAD_SIZE - 1))
+	    : "cc");
+	return ti;
+}
+
+/* how to get the current stack pointer from C */
+static inline unsigned long current_stack_pointer(void)
+{
+	unsigned long sp;
+	asm("mov sp,%0; ":"=r" (sp));
+	return sp;
+}
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(ti)	kfree((ti))
+#define get_thread_info(ti)	get_task_struct((ti)->task)
+#define put_thread_info(ti)	put_task_struct((ti)->task)
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __VMLINUX_LDS__
+/* how to get the thread information struct from ASM */
+.macro GET_THREAD_INFO reg
+	mov	sp,\reg
+	and	-THREAD_SIZE,\reg
+.endm
+#endif
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ *   access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
+#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		17	/* OOM killer killed process */
+#define TIF_FREEZE		18	/* freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE	+(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	+(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		+(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	+(1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP		+(1 << TIF_SINGLESTEP)
+#define _TIF_RESTORE_SIGMASK	+(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG	+(1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE		+(1 << TIF_FREEZE)
+
+#define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK	0x0000FFFF	/* work to do on any return to u-space */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/mn10300/include/asm/timer-regs.h b/arch/mn10300/include/asm/timer-regs.h
new file mode 100644
index 0000000..1d883b7
--- /dev/null
+++ b/arch/mn10300/include/asm/timer-regs.h
@@ -0,0 +1,293 @@
+/* AM33v2 on-board timer module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* timer prescalar control */
+#define	TMPSCNT			__SYSREG(0xd4003071, u8) /* timer prescaler control */
+#define	TMPSCNT_ENABLE		0x80	/* timer prescaler enable */
+#define	TMPSCNT_DISABLE		0x00	/* timer prescaler disable */
+
+/* 8 bit timers */
+#define	TM0MD			__SYSREG(0xd4003000, u8) /* timer 0 mode register */
+#define	TM0MD_SRC		0x07	/* timer source */
+#define	TM0MD_SRC_IOCLK		0x00	/* - IOCLK */
+#define	TM0MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM0MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM0MD_SRC_TM2IO		0x03	/* - TM2IO pin input */
+#define	TM0MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM0MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM0MD_SRC_TM0IO		0x07	/* - TM0IO pin input */
+#define	TM0MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM0MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM1MD			__SYSREG(0xd4003001, u8) /* timer 1 mode register */
+#define	TM1MD_SRC		0x07	/* timer source */
+#define	TM1MD_SRC_IOCLK		0x00	/* - IOCLK */
+#define	TM1MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM1MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM1MD_SRC_TM0CASCADE	0x03	/* - cascade with timer 0 */
+#define	TM1MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM1MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM1MD_SRC_TM1IO		0x07	/* - TM1IO pin input */
+#define	TM1MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM1MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM2MD			__SYSREG(0xd4003002, u8) /* timer 2 mode register */
+#define	TM2MD_SRC		0x07	/* timer source */
+#define	TM2MD_SRC_IOCLK		0x00	/* - IOCLK */
+#define	TM2MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM2MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM2MD_SRC_TM1CASCADE	0x03	/* - cascade with timer 1 */
+#define	TM2MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM2MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM2MD_SRC_TM2IO		0x07	/* - TM2IO pin input */
+#define	TM2MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM2MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM3MD			__SYSREG(0xd4003003, u8) /* timer 3 mode register */
+#define	TM3MD_SRC		0x07	/* timer source */
+#define	TM3MD_SRC_IOCLK		0x00	/* - IOCLK */
+#define	TM3MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM3MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM3MD_SRC_TM1CASCADE	0x03	/* - cascade with timer 2 */
+#define	TM3MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM3MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM3MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM3MD_SRC_TM3IO		0x07	/* - TM3IO pin input */
+#define	TM3MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM3MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM01MD			__SYSREG(0xd4003000, u16)  /* timer 0:1 mode register */
+
+#define	TM0BR			__SYSREG(0xd4003010, u8)   /* timer 0 base register */
+#define	TM1BR			__SYSREG(0xd4003011, u8)   /* timer 1 base register */
+#define	TM2BR			__SYSREG(0xd4003012, u8)   /* timer 2 base register */
+#define	TM3BR			__SYSREG(0xd4003013, u8)   /* timer 3 base register */
+#define	TM01BR			__SYSREG(0xd4003010, u16)  /* timer 0:1 base register */
+
+#define	TM0BC			__SYSREGC(0xd4003020, u8)  /* timer 0 binary counter */
+#define	TM1BC			__SYSREGC(0xd4003021, u8)  /* timer 1 binary counter */
+#define	TM2BC			__SYSREGC(0xd4003022, u8)  /* timer 2 binary counter */
+#define	TM3BC			__SYSREGC(0xd4003023, u8)  /* timer 3 binary counter */
+#define	TM01BC			__SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */
+
+#define TM0IRQ			2	/* timer 0 IRQ */
+#define TM1IRQ			3	/* timer 1 IRQ */
+#define TM2IRQ			4	/* timer 2 IRQ */
+#define TM3IRQ			5	/* timer 3 IRQ */
+
+#define	TM0ICR			GxICR(TM0IRQ)	/* timer 0 uflow intr ctrl reg */
+#define	TM1ICR			GxICR(TM1IRQ)	/* timer 1 uflow intr ctrl reg */
+#define	TM2ICR			GxICR(TM2IRQ)	/* timer 2 uflow intr ctrl reg */
+#define	TM3ICR			GxICR(TM3IRQ)	/* timer 3 uflow intr ctrl reg */
+
+/* 16-bit timers 4,5 & 7-11 */
+#define	TM4MD			__SYSREG(0xd4003080, u8)   /* timer 4 mode register */
+#define	TM4MD_SRC		0x07	/* timer source */
+#define	TM4MD_SRC_IOCLK		0x00	/* - IOCLK */
+#define	TM4MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM4MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM4MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM4MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM4MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM4MD_SRC_TM4IO		0x07	/* - TM4IO pin input */
+#define	TM4MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM4MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM5MD			__SYSREG(0xd4003082, u8)   /* timer 5 mode register */
+#define	TM5MD_SRC		0x07	/* timer source */
+#define	TM5MD_SRC_IOCLK		0x00	/* - IOCLK */
+#define	TM5MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM5MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM5MD_SRC_TM4CASCADE	0x03	/* - cascade with timer 4 */
+#define	TM5MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM5MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM5MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM5MD_SRC_TM5IO		0x07	/* - TM5IO pin input */
+#define	TM5MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM5MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM7MD			__SYSREG(0xd4003086, u8)   /* timer 7 mode register */
+#define	TM7MD_SRC		0x07	/* timer source */
+#define	TM7MD_SRC_IOCLK		0x00	/* - IOCLK */
+#define	TM7MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM7MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM7MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM7MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM7MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM7MD_SRC_TM7IO		0x07	/* - TM7IO pin input */
+#define	TM7MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM7MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM8MD			__SYSREG(0xd4003088, u8)   /* timer 8 mode register */
+#define	TM8MD_SRC		0x07	/* timer source */
+#define	TM8MD_SRC_IOCLK		0x00	/* - IOCLK */
+#define	TM8MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM8MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM8MD_SRC_TM7CASCADE	0x03	/* - cascade with timer 7 */
+#define	TM8MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM8MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM8MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM8MD_SRC_TM8IO		0x07	/* - TM8IO pin input */
+#define	TM8MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM8MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM9MD			__SYSREG(0xd400308a, u8)   /* timer 9 mode register */
+#define	TM9MD_SRC		0x07	/* timer source */
+#define	TM9MD_SRC_IOCLK		0x00	/* - IOCLK */
+#define	TM9MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM9MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM9MD_SRC_TM8CASCADE	0x03	/* - cascade with timer 8 */
+#define	TM9MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM9MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM9MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM9MD_SRC_TM9IO		0x07	/* - TM9IO pin input */
+#define	TM9MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM9MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM10MD			__SYSREG(0xd400308c, u8)   /* timer 10 mode register */
+#define	TM10MD_SRC		0x07	/* timer source */
+#define	TM10MD_SRC_IOCLK	0x00	/* - IOCLK */
+#define	TM10MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM10MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM10MD_SRC_TM9CASCADE	0x03	/* - cascade with timer 9 */
+#define	TM10MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM10MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM10MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM10MD_SRC_TM10IO	0x07	/* - TM10IO pin input */
+#define	TM10MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM10MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM11MD			__SYSREG(0xd400308e, u8)   /* timer 11 mode register */
+#define	TM11MD_SRC		0x07	/* timer source */
+#define	TM11MD_SRC_IOCLK	0x00	/* - IOCLK */
+#define	TM11MD_SRC_IOCLK_8	0x01	/* - 1/8 IOCLK */
+#define	TM11MD_SRC_IOCLK_32	0x02	/* - 1/32 IOCLK */
+#define	TM11MD_SRC_TM7CASCADE	0x03	/* - cascade with timer 7 */
+#define	TM11MD_SRC_TM0UFLOW	0x04	/* - timer 0 underflow */
+#define	TM11MD_SRC_TM1UFLOW	0x05	/* - timer 1 underflow */
+#define	TM11MD_SRC_TM2UFLOW	0x06	/* - timer 2 underflow */
+#define	TM11MD_SRC_TM11IO	0x07	/* - TM11IO pin input */
+#define	TM11MD_INIT_COUNTER	0x40	/* initialize TMnBC = TMnBR */
+#define	TM11MD_COUNT_ENABLE	0x80	/* timer count enable */
+
+#define	TM4BR			__SYSREG(0xd4003090, u16)  /* timer 4 base register */
+#define	TM5BR			__SYSREG(0xd4003092, u16)  /* timer 5 base register */
+#define	TM7BR			__SYSREG(0xd4003096, u16)  /* timer 7 base register */
+#define	TM8BR			__SYSREG(0xd4003098, u16)  /* timer 8 base register */
+#define	TM9BR			__SYSREG(0xd400309a, u16)  /* timer 9 base register */
+#define	TM10BR			__SYSREG(0xd400309c, u16)  /* timer 10 base register */
+#define	TM11BR			__SYSREG(0xd400309e, u16)  /* timer 11 base register */
+#define	TM45BR			__SYSREG(0xd4003090, u32)  /* timer 4:5 base register */
+
+#define	TM4BC			__SYSREG(0xd40030a0, u16)  /* timer 4 binary counter */
+#define	TM5BC			__SYSREG(0xd40030a2, u16)  /* timer 5 binary counter */
+#define	TM45BC			__SYSREG(0xd40030a0, u32)  /* timer 4:5 binary counter */
+
+#define	TM7BC			__SYSREG(0xd40030a6, u16)  /* timer 7 binary counter */
+#define	TM8BC			__SYSREG(0xd40030a8, u16)  /* timer 8 binary counter */
+#define	TM9BC			__SYSREG(0xd40030aa, u16)  /* timer 9 binary counter */
+#define	TM10BC			__SYSREG(0xd40030ac, u16)  /* timer 10 binary counter */
+#define	TM11BC			__SYSREG(0xd40030ae, u16)  /* timer 11 binary counter */
+
+#define TM4IRQ			6	/* timer 4 IRQ */
+#define TM5IRQ			7	/* timer 5 IRQ */
+#define TM7IRQ			11	/* timer 7 IRQ */
+#define TM8IRQ			12	/* timer 8 IRQ */
+#define TM9IRQ			13	/* timer 9 IRQ */
+#define TM10IRQ			14	/* timer 10 IRQ */
+#define TM11IRQ			15	/* timer 11 IRQ */
+
+#define	TM4ICR			GxICR(TM4IRQ)	/* timer 4 uflow intr ctrl reg */
+#define	TM5ICR			GxICR(TM5IRQ)	/* timer 5 uflow intr ctrl reg */
+#define	TM7ICR			GxICR(TM7IRQ)	/* timer 7 uflow intr ctrl reg */
+#define	TM8ICR			GxICR(TM8IRQ)	/* timer 8 uflow intr ctrl reg */
+#define	TM9ICR			GxICR(TM9IRQ)	/* timer 9 uflow intr ctrl reg */
+#define	TM10ICR			GxICR(TM10IRQ)	/* timer 10 uflow intr ctrl reg */
+#define	TM11ICR			GxICR(TM11IRQ)	/* timer 11 uflow intr ctrl reg */
+
+/* 16-bit timer 6 */
+#define	TM6MD			__SYSREG(0xd4003084, u16)  /* timer6 mode register */
+#define	TM6MD_SRC		0x0007	/* timer source */
+#define	TM6MD_SRC_IOCLK		0x0000	/* - IOCLK */
+#define	TM6MD_SRC_IOCLK_8	0x0001	/* - 1/8 IOCLK */
+#define	TM6MD_SRC_IOCLK_32	0x0002	/* - 1/32 IOCLK */
+#define	TM6MD_SRC_TM0UFLOW	0x0004	/* - timer 0 underflow */
+#define	TM6MD_SRC_TM1UFLOW	0x0005	/* - timer 1 underflow */
+#define	TM6MD_SRC_TM6IOB_BOTH	0x0006	/* - TM6IOB pin input (both edges) */
+#define	TM6MD_SRC_TM6IOB_SINGLE	0x0007	/* - TM6IOB pin input (single edge) */
+#define	TM6MD_CLR_ENABLE	0x0010	/* clear count enable */
+#define	TM6MD_ONESHOT_ENABLE	0x0040	/* oneshot count */
+#define	TM6MD_TRIG_ENABLE	0x0080	/* TM6IOB pin trigger enable */
+#define TM6MD_PWM		0x3800	/* PWM output mode */
+#define TM6MD_PWM_DIS		0x0000	/* - disabled */
+#define	TM6MD_PWM_10BIT		0x1000	/* - 10 bits mode */
+#define	TM6MD_PWM_11BIT		0x1800	/* - 11 bits mode */
+#define	TM6MD_PWM_12BIT		0x3000	/* - 12 bits mode */
+#define	TM6MD_PWM_14BIT		0x3800	/* - 14 bits mode */
+#define	TM6MD_INIT_COUNTER	0x4000	/* initialize TMnBC to zero */
+#define	TM6MD_COUNT_ENABLE	0x8000	/* timer count enable */
+
+#define	TM6MDA			__SYSREG(0xd40030b4, u8)   /* timer6 cmp/cap A mode reg */
+#define TM6MDA_OUT		0x07	/* output select */
+#define	TM6MDA_OUT_SETA_RESETB	0x00	/* - set at match A, reset at match B */
+#define	TM6MDA_OUT_SETA_RESETOV	0x01	/* - set at match A, reset at overflow */
+#define	TM6MDA_OUT_SETA		0x02	/* - set at match A */
+#define	TM6MDA_OUT_RESETA	0x03	/* - reset at match A */
+#define	TM6MDA_OUT_TOGGLE	0x04	/* - toggle on match A */
+#define TM6MDA_MODE		0xc0	/* compare A register mode */
+#define	TM6MDA_MODE_CMP_SINGLE	0x00	/* - compare, single buffer mode */
+#define	TM6MDA_MODE_CMP_DOUBLE	0x40	/* - compare, double buffer mode */
+#define	TM6MDA_MODE_CAP_S_EDGE	0x80	/* - capture, single edge mode */
+#define	TM6MDA_MODE_CAP_D_EDGE	0xc0	/* - capture, double edge mode */
+#define TM6MDA_EDGE		0x20	/* compare A edge select */
+#define	TM6MDA_EDGE_FALLING	0x00	/* capture on falling edge */
+#define	TM6MDA_EDGE_RISING	0x20	/* capture on rising edge */
+#define	TM6MDA_CAPTURE_ENABLE	0x10	/* capture enable */
+
+#define	TM6MDB			__SYSREG(0xd40030b5, u8)   /* timer6 cmp/cap B mode reg */
+#define TM6MDB_OUT		0x07	/* output select */
+#define	TM6MDB_OUT_SETB_RESETA	0x00	/* - set at match B, reset at match A */
+#define	TM6MDB_OUT_SETB_RESETOV	0x01	/* - set at match B */
+#define	TM6MDB_OUT_RESETB	0x03	/* - reset at match B */
+#define	TM6MDB_OUT_TOGGLE	0x04	/* - toggle on match B */
+#define TM6MDB_MODE		0xc0	/* compare B register mode */
+#define	TM6MDB_MODE_CMP_SINGLE	0x00	/* - compare, single buffer mode */
+#define	TM6MDB_MODE_CMP_DOUBLE	0x40	/* - compare, double buffer mode */
+#define	TM6MDB_MODE_CAP_S_EDGE	0x80	/* - capture, single edge mode */
+#define	TM6MDB_MODE_CAP_D_EDGE	0xc0	/* - capture, double edge mode */
+#define TM6MDB_EDGE		0x20	/* compare B edge select */
+#define	TM6MDB_EDGE_FALLING	0x00	/* capture on falling edge */
+#define	TM6MDB_EDGE_RISING	0x20	/* capture on rising edge */
+#define	TM6MDB_CAPTURE_ENABLE	0x10	/* capture enable */
+
+#define	TM6CA			__SYSREG(0xd40030c4, u16)   /* timer6 cmp/capture reg A */
+#define	TM6CB			__SYSREG(0xd40030d4, u16)   /* timer6 cmp/capture reg B */
+#define	TM6BC			__SYSREG(0xd40030a4, u16)   /* timer6 binary counter */
+
+#define TM6IRQ			6	/* timer 6 IRQ */
+#define TM6AIRQ			9	/* timer 6A IRQ */
+#define TM6BIRQ			10	/* timer 6B IRQ */
+
+#define	TM6ICR			GxICR(TM6IRQ)	/* timer 6 uflow intr ctrl reg */
+#define	TM6AICR			GxICR(TM6AIRQ)	/* timer 6A intr control reg */
+#define	TM6BICR			GxICR(TM6BIRQ)	/* timer 6B intr control reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMER_REGS_H */
diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h
new file mode 100644
index 0000000..3944277
--- /dev/null
+++ b/arch/mn10300/include/asm/timex.h
@@ -0,0 +1,33 @@
+/* MN10300 Architecture time management specifications
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#include <asm/hardirq.h>
+#include <asm/unit/timex.h>
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set
+				 * to something appropriate, but what? */
+
+extern cycles_t cacheflush_time;
+
+#ifdef __KERNEL__
+
+static inline cycles_t get_cycles(void)
+{
+	return read_timestamp_counter();
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMEX_H */
diff --git a/arch/mn10300/include/asm/tlb.h b/arch/mn10300/include/asm/tlb.h
new file mode 100644
index 0000000..65d232b
--- /dev/null
+++ b/arch/mn10300/include/asm/tlb.h
@@ -0,0 +1,34 @@
+/* MN10300 TLB definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+
+#include <asm/tlbflush.h>
+
+extern void check_pgt_cache(void);
+
+/*
+ * we don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma)				do { } while (0)
+#define tlb_end_vma(tlb, vma)				do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)	do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb)	flush_tlb_mm((tlb)->mm)
+
+/* for now, just use the generic stuff */
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TLB_H */
diff --git a/arch/mn10300/include/asm/tlbflush.h b/arch/mn10300/include/asm/tlbflush.h
new file mode 100644
index 0000000..e023986
--- /dev/null
+++ b/arch/mn10300/include/asm/tlbflush.h
@@ -0,0 +1,80 @@
+/* MN10300 TLB flushing functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+
+#include <asm/processor.h>
+
+#define __flush_tlb()						\
+do {								\
+	int w;							\
+	__asm__ __volatile__					\
+		("	mov %1,%0		\n"		\
+		 "	or %2,%0		\n"		\
+		 "	mov %0,%1		\n"		\
+		 : "=d"(w)					\
+		 : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV)	\
+		 : "memory"					\
+		 );						\
+} while (0)
+
+#define __flush_tlb_all() __flush_tlb()
+#define __flush_tlb_one(addr) __flush_tlb()
+
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(mm, start, end) flushes a range of pages
+ *  - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+#define flush_tlb_all()				\
+do {						\
+	preempt_disable();			\
+	__flush_tlb_all();			\
+	preempt_enable();			\
+} while (0)
+
+#define flush_tlb_mm(mm)			\
+do {						\
+	preempt_disable();			\
+	__flush_tlb_all();			\
+	preempt_enable();			\
+} while (0)
+
+#define flush_tlb_range(vma, start, end)			\
+do {								\
+	unsigned long __s __attribute__((unused)) = (start);	\
+	unsigned long __e __attribute__((unused)) = (end);	\
+	preempt_disable();					\
+	__flush_tlb_all();					\
+	preempt_enable();					\
+} while (0)
+
+
+#define __flush_tlb_global()			flush_tlb_all()
+#define flush_tlb()				flush_tlb_all()
+#define flush_tlb_kernel_range(start, end)			\
+do {								\
+	unsigned long __s __attribute__((unused)) = (start);	\
+	unsigned long __e __attribute__((unused)) = (end);	\
+	flush_tlb_all();					\
+} while (0)
+
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
+
+#define flush_tlb_pgtables(mm, start, end)	do {} while (0)
+
+#endif /* _ASM_TLBFLUSH_H */
diff --git a/arch/mn10300/include/asm/topology.h b/arch/mn10300/include/asm/topology.h
new file mode 100644
index 0000000..5428f33
--- /dev/null
+++ b/arch/mn10300/include/asm/topology.h
@@ -0,0 +1 @@
+#include <asm-generic/topology.h>
diff --git a/arch/mn10300/include/asm/types.h b/arch/mn10300/include/asm/types.h
new file mode 100644
index 0000000..7b9f010
--- /dev/null
+++ b/arch/mn10300/include/asm/types.h
@@ -0,0 +1,38 @@
+/* MN10300 Basic type definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide.  */
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
new file mode 100644
index 0000000..8a3a4dd
--- /dev/null
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -0,0 +1,490 @@
+/* MN10300 userspace access functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+#define KERNEL_XDS	MAKE_MM_SEG(0xBFFFFFFF)
+#define KERNEL_DS	MAKE_MM_SEG(0x9FFFFFFF)
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE)
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF)
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+	((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * check that a range of addresses falls within the current address limit
+ */
+static inline int ___range_ok(unsigned long addr, unsigned int size)
+{
+	int flag = 1, tmp;
+
+	asm("	add	%3,%1	\n"	/* set C-flag if addr + size > 4Gb */
+	    "	bcs	0f	\n"
+	    "	cmp	%4,%1	\n"	/* jump if addr+size>limit (error) */
+	    "	bhi	0f	\n"
+	    "	clr	%0	\n"	/* mark okay */
+	    "0:			\n"
+	    : "=r"(flag), "=&r"(tmp)
+	    : "1"(addr), "ir"(size),
+	      "r"(current_thread_info()->addr_limit.seg), "0"(flag)
+	    : "cc"
+	    );
+
+	return flag;
+}
+
+#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size))
+
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
+#define __access_ok(addr, size)     (__range_ok((addr), (size)) == 0)
+
+static inline int verify_area(int type, const void *addr, unsigned long size)
+{
+	return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern int fixup_exception(struct pt_regs *regs);
+
+#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "xxx_ret" versions return constant specified in third argument, if
+ * something bad happens. These macros can be optimized for the
+ * case of just returning from the function xxx_ret is used.
+ */
+
+#define put_user_ret(x, ptr, ret) \
+	({ if (put_user((x), (ptr)))	return (ret); })
+#define get_user_ret(x, ptr, ret) \
+	({ if (get_user((x), (ptr)))	return (ret); })
+#define __put_user_ret(x, ptr, ret) \
+	({ if (__put_user((x), (ptr)))	return (ret); })
+#define __get_user_ret(x, ptr, ret) \
+	({ if (__get_user((x), (ptr)))	return (ret); })
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+#define __get_user_nocheck(x, ptr, size)	\
+({						\
+	__typeof(*(ptr)) __gu_val;		\
+	unsigned long __gu_addr;		\
+	int __gu_err;				\
+	__gu_addr = (unsigned long) (ptr);	\
+	switch (size) {				\
+	case 1:  __get_user_asm("bu"); break;	\
+	case 2:  __get_user_asm("hu"); break;	\
+	case 4:  __get_user_asm(""  ); break;	\
+	default: __get_user_unknown(); break;	\
+	}					\
+	x = (__typeof__(*(ptr))) __gu_val;	\
+	__gu_err;				\
+})
+
+#define __get_user_check(x, ptr, size)			\
+({							\
+	__typeof__(*(ptr)) __gu_val;			\
+	unsigned long __gu_addr;			\
+	int __gu_err;					\
+	__gu_addr = (unsigned long) (ptr);		\
+	if (likely(__access_ok(__gu_addr,size))) {	\
+		switch (size) {				\
+		case 1:  __get_user_asm("bu"); break;	\
+		case 2:  __get_user_asm("hu"); break;	\
+		case 4:  __get_user_asm(""  ); break;	\
+		default: __get_user_unknown(); break;	\
+		}					\
+	}						\
+	else {						\
+		__gu_err = -EFAULT;			\
+		__gu_val = 0;				\
+	}						\
+	x = (__typeof__(*(ptr))) __gu_val;		\
+	__gu_err;					\
+})
+
+#define __get_user_asm(INSN)					\
+({								\
+	asm volatile(					\
+		"1:\n"						\
+		"	mov"INSN"	%2,%1\n"		\
+		"	mov		0,%0\n"			\
+		"2:\n"						\
+		"	.section	.fixup,\"ax\"\n"	\
+		"3:\n\t"					\
+		"	mov		%3,%0\n"		\
+		"	jmp		2b\n"			\
+		"	.previous\n"				\
+		"	.section	__ex_table,\"a\"\n"	\
+		"	.balign		4\n"			\
+		"	.long		1b, 3b\n"		\
+		"	.previous"				\
+		: "=&r" (__gu_err), "=&r" (__gu_val)		\
+		: "m" (__m(__gu_addr)), "i" (-EFAULT));		\
+})
+
+extern int __get_user_unknown(void);
+
+#define __put_user_nocheck(x, ptr, size)			\
+({								\
+	union {							\
+		__typeof__(*(ptr)) val;				\
+		u32 bits[2];					\
+	} __pu_val;						\
+	unsigned long __pu_addr;				\
+	int __pu_err;						\
+	__pu_val.val = (x);					\
+	__pu_addr = (unsigned long) (ptr);			\
+	switch (size) {						\
+	case 1:  __put_user_asm("bu"); break;			\
+	case 2:  __put_user_asm("hu"); break;			\
+	case 4:  __put_user_asm(""  ); break;			\
+	case 8:  __put_user_asm8();    break;			\
+	default: __pu_err = __put_user_unknown(); break;	\
+	}							\
+	__pu_err;						\
+})
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	union {								\
+		__typeof__(*(ptr)) val;					\
+		u32 bits[2];						\
+	} __pu_val;							\
+	unsigned long __pu_addr;					\
+	int __pu_err;							\
+	__pu_val.val = (x);						\
+	__pu_addr = (unsigned long) (ptr);				\
+	if (likely(__access_ok(__pu_addr, size))) {			\
+		switch (size) {						\
+		case 1:  __put_user_asm("bu"); break;			\
+		case 2:  __put_user_asm("hu"); break;			\
+		case 4:  __put_user_asm(""  ); break;			\
+		case 8:  __put_user_asm8();    break;			\
+		default: __pu_err = __put_user_unknown(); break;	\
+		}							\
+	}								\
+	else {								\
+		__pu_err = -EFAULT;					\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_asm(INSN)					\
+({								\
+	asm volatile(						\
+		"1:\n"						\
+		"	mov"INSN"	%1,%2\n"		\
+		"	mov		0,%0\n"			\
+		"2:\n"						\
+		"	.section	.fixup,\"ax\"\n"	\
+		"3:\n"						\
+		"	mov		%3,%0\n"		\
+		"	jmp		2b\n"			\
+		"	.previous\n"				\
+		"	.section	__ex_table,\"a\"\n"	\
+		"	.balign		4\n"			\
+		"	.long		1b, 3b\n"		\
+		"	.previous"				\
+		: "=&r" (__pu_err)				\
+		: "r" (__pu_val.val), "m" (__m(__pu_addr)),	\
+		  "i" (-EFAULT)					\
+		);						\
+})
+
+#define __put_user_asm8()						\
+({									\
+	asm volatile(							\
+		"1:	mov		%1,%3		\n"		\
+		"2:	mov		%2,%4		\n"		\
+		"	mov		0,%0		\n"		\
+		"3:					\n"		\
+		"	.section	.fixup,\"ax\"	\n"		\
+		"4:					\n"		\
+		"	mov		%5,%0		\n"		\
+		"	jmp		3b		\n"		\
+		"	.previous			\n"		\
+		"	.section	__ex_table,\"a\"\n"		\
+		"	.balign		4		\n"		\
+		"	.long		1b, 4b		\n"		\
+		"	.long		2b, 4b		\n"		\
+		"	.previous			\n"		\
+		: "=&r" (__pu_err)					\
+		: "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]),	\
+		  "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)),		\
+		  "i" (-EFAULT)						\
+		);							\
+})
+
+extern int __put_user_unknown(void);
+
+
+/*
+ * Copy To/From Userspace
+ */
+/* Generic arbitrary sized copy.  */
+#define __copy_user(to, from, size)					\
+do {									\
+	if (size) {							\
+		void *__to = to;					\
+		const void *__from = from;				\
+		int w;							\
+		asm volatile(						\
+			"0:     movbu	(%0),%3;\n"			\
+			"1:     movbu	%3,(%1);\n"			\
+			"	inc	%0;\n"				\
+			"	inc	%1;\n"				\
+			"       add	-1,%2;\n"			\
+			"       bne	0b;\n"				\
+			"2:\n"						\
+			"	.section .fixup,\"ax\"\n"		\
+			"3:	jmp	2b\n"				\
+			"	.previous\n"				\
+			"	.section __ex_table,\"a\"\n"		\
+			"       .balign	4\n"				\
+			"       .long	0b,3b\n"			\
+			"       .long	1b,3b\n"			\
+			"	.previous\n"				\
+			: "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+			: "0"(__from), "1"(__to), "2"(size)		\
+			: "memory");					\
+	}								\
+} while (0)
+
+#define __copy_user_zeroing(to, from, size)				\
+do {									\
+	if (size) {							\
+		void *__to = to;					\
+		const void *__from = from;				\
+		int w;							\
+		asm volatile(						\
+			"0:     movbu	(%0),%3;\n"			\
+			"1:     movbu	%3,(%1);\n"			\
+			"	inc	%0;\n"				\
+			"	inc	%1;\n"				\
+			"       add	-1,%2;\n"			\
+			"       bne	0b;\n"				\
+			"2:\n"						\
+			"	.section .fixup,\"ax\"\n"		\
+			"3:\n"						\
+			"	mov	%2,%0\n"			\
+			"	clr	%3\n"				\
+			"4:     movbu	%3,(%1);\n"			\
+			"	inc	%1;\n"				\
+			"       add	-1,%2;\n"			\
+			"       bne	4b;\n"				\
+			"	mov	%0,%2\n"			\
+			"	jmp	2b\n"				\
+			"	.previous\n"				\
+			"	.section __ex_table,\"a\"\n"		\
+			"       .balign	4\n"				\
+			"       .long	0b,3b\n"			\
+			"       .long	1b,3b\n"			\
+			"	.previous\n"				\
+			: "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+			: "0"(__from), "1"(__to), "2"(size)		\
+			: "memory");					\
+	}								\
+} while (0)
+
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+static inline
+unsigned long __generic_copy_from_user_nocheck(void *to, const void *from,
+					       unsigned long n)
+{
+	__copy_user_zeroing(to, from, n);
+	return n;
+}
+
+static inline
+unsigned long __generic_copy_to_user_nocheck(void *to, const void *from,
+					     unsigned long n)
+{
+	__copy_user(to, from, n);
+	return n;
+}
+
+
+#if 0
+#error don't use - these macros don't increment to & from pointers
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user(to, from, size)	\
+do {						\
+	asm volatile(				\
+		"       mov %0,a0;\n"		\
+		"0:     movbu (%1),d3;\n"	\
+		"1:     movbu d3,(%2);\n"	\
+		"       add -1,a0;\n"		\
+		"       bne 0b;\n"		\
+		"2:;"				\
+		".section .fixup,\"ax\"\n"	\
+		"3:	jmp 2b\n"		\
+		".previous\n"			\
+		".section __ex_table,\"a\"\n"	\
+		"       .balign 4\n"		\
+		"       .long 0b,3b\n"		\
+		"       .long 1b,3b\n"		\
+		".previous"			\
+		:				\
+		: "d"(size), "d"(to), "d"(from)	\
+		: "d3", "a0");			\
+} while (0)
+
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user_zeroing(to, from, size)	\
+do {							\
+	asm volatile(					\
+		"       mov %0,a0;\n"			\
+		"0:     movbu (%1),d3;\n"		\
+		"1:     movbu d3,(%2);\n"		\
+		"       add -1,a0;\n"			\
+		"       bne 0b;\n"			\
+		"2:;"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	jmp 2b\n"			\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"       .balign 4\n"			\
+		"       .long 0b,3b\n"			\
+		"       .long 1b,3b\n"			\
+		".previous"				\
+		:					\
+		: "d"(size), "d"(to), "d"(from)		\
+		: "d3", "a0");				\
+} while (0)
+
+static inline
+unsigned long __constant_copy_to_user(void *to, const void *from,
+				      unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		__constant_copy_user(to, from, n);
+	return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user(void *to, const void *from,
+					unsigned long n)
+{
+	if (access_ok(VERIFY_READ, from, n))
+		__constant_copy_user_zeroing(to, from, n);
+	return n;
+}
+
+static inline
+unsigned long __constant_copy_to_user_nocheck(void *to, const void *from,
+					      unsigned long n)
+{
+	__constant_copy_user(to, from, n);
+	return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user_nocheck(void *to, const void *from,
+						unsigned long n)
+{
+	__constant_copy_user_zeroing(to, from, n);
+	return n;
+}
+#endif
+
+extern unsigned long __generic_copy_to_user(void __user *, const void *,
+					    unsigned long);
+extern unsigned long __generic_copy_from_user(void *, const void __user *,
+					      unsigned long);
+
+#define __copy_to_user_inatomic(to, from, n) \
+	__generic_copy_to_user_nocheck((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+	__generic_copy_from_user_nocheck((to), (from), (n))
+
+#define __copy_to_user(to, from, n)			\
+({							\
+	might_sleep();					\
+	__copy_to_user_inatomic((to), (from), (n));	\
+})
+
+#define __copy_from_user(to, from, n)			\
+({							\
+	might_sleep();					\
+	__copy_from_user_inatomic((to), (from), (n));	\
+})
+
+
+#define copy_to_user(to, from, n)   __generic_copy_to_user((to), (from), (n))
+#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n))
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *str, long n);
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+extern unsigned long clear_user(void __user *mem, unsigned long len);
+extern unsigned long __clear_user(void __user *mem, unsigned long len);
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/mn10300/include/asm/ucontext.h b/arch/mn10300/include/asm/ucontext.h
new file mode 100644
index 0000000..fcab5c1
--- /dev/null
+++ b/arch/mn10300/include/asm/ucontext.h
@@ -0,0 +1,22 @@
+/* MN10300 User context
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* _ASM_UCONTEXT_H */
diff --git a/arch/mn10300/include/asm/unaligned.h b/arch/mn10300/include/asm/unaligned.h
new file mode 100644
index 0000000..0df6713
--- /dev/null
+++ b/arch/mn10300/include/asm/unaligned.h
@@ -0,0 +1,20 @@
+/* MN10300 Unaligned memory access handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MN10300_UNALIGNED_H
+#define _ASM_MN10300_UNALIGNED_H
+
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_le
+#define put_unaligned	__put_unaligned_le
+
+#endif /* _ASM_MN10300_UNALIGNED_H */
diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h
new file mode 100644
index 0000000..543a4f9
--- /dev/null
+++ b/arch/mn10300/include/asm/unistd.h
@@ -0,0 +1,390 @@
+/* MN10300 System call number list
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNISTD_H
+#define _ASM_UNISTD_H
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_madvise1		219	/* delete when C lib stub is removed */
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind		274
+#define __NR_get_mempolicy	275
+#define __NR_set_mempolicy	276
+#define __NR_mq_open 		277
+#define __NR_mq_unlink		(__NR_mq_open+1)
+#define __NR_mq_timedsend	(__NR_mq_open+2)
+#define __NR_mq_timedreceive	(__NR_mq_open+3)
+#define __NR_mq_notify		(__NR_mq_open+4)
+#define __NR_mq_getsetattr	(__NR_mq_open+5)
+#define __NR_kexec_load		283
+#define __NR_waitid		284
+#define __NR_add_key		286
+#define __NR_request_key	287
+#define __NR_keyctl		288
+#define __NR_cacheflush		289
+#define __NR_ioprio_set		290
+#define __NR_ioprio_get		291
+#define __NR_inotify_init	292
+#define __NR_inotify_add_watch	293
+#define __NR_inotify_rm_watch	294
+#define __NR_migrate_pages	295
+#define __NR_openat		296
+#define __NR_mkdirat		297
+#define __NR_mknodat		298
+#define __NR_fchownat		299
+#define __NR_futimesat		300
+#define __NR_fstatat64		301
+#define __NR_unlinkat		302
+#define __NR_renameat		303
+#define __NR_linkat		304
+#define __NR_symlinkat		305
+#define __NR_readlinkat		306
+#define __NR_fchmodat		307
+#define __NR_faccessat		308
+#define __NR_pselect6		309
+#define __NR_ppoll		310
+#define __NR_unshare		311
+#define __NR_set_robust_list	312
+#define __NR_get_robust_list	313
+#define __NR_splice		314
+#define __NR_sync_file_range	315
+#define __NR_tee		316
+#define __NR_vmsplice		317
+#define __NR_move_pages		318
+#define __NR_getcpu		319
+#define __NR_epoll_pwait	320
+#define __NR_utimensat		321
+#define __NR_signalfd		322
+#define __NR_timerfd_create	323
+#define __NR_eventfd		324
+#define __NR_fallocate		325
+#define __NR_timerfd_settime	326
+#define __NR_timerfd_gettime	327
+#define __NR_signalfd4		328
+#define __NR_eventfd2		329
+#define __NR_epoll_create1	330
+#define __NR_dup3		331
+#define __NR_pipe2		332
+#define __NR_inotify_init1	333
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 326
+
+/*
+ * specify the deprecated syscalls we want to support on this arch
+ */
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/clock.h b/arch/mn10300/include/asm/unit-asb2303/clock.h
new file mode 100644
index 0000000..8b450e9
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2303/clock.h
@@ -0,0 +1,45 @@
+/* ASB2303-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk;	/* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK		((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK	((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK		33333333UL
+/* #define MN10300_IOBCLK	66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK		MN10300_IOCLK
+#define MN10300_TSCCLK		MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ	((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ	(MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/leds.h b/arch/mn10300/include/asm/unit-asb2303/leds.h
new file mode 100644
index 0000000..3a7543e
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2303/leds.h
@@ -0,0 +1,43 @@
+/* ASB2303-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2303_GPIO0DEF	__SYSREG(0xDB000000, u32)
+#define ASB2303_7SEGLEDS	__SYSREG(0xDB000008, u32)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+
+/* flip the 7-segment LEDs between "G" and "-" */
+#define mn10300_set_gdbleds(ONOFF)			\
+do {							\
+	ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f;	\
+} while (0)
+
+/* indicate double-fault by displaying "d" on the LEDs */
+#define mn10300_set_dbfleds			\
+	mov	0x43,d0			;	\
+	movbu	d0,(ASB2303_7SEGLEDS)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code code);
+extern void peripheral_leds_led_chase(void);
+extern void debug_to_serial(const char *p, int n);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/serial.h b/arch/mn10300/include/asm/unit-asb2303/serial.h
new file mode 100644
index 0000000..0d55cf5
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2303/serial.h
@@ -0,0 +1,136 @@
+/* ASB2303-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu-regs.h>
+#include <asm/proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS	0xA6FB0000
+#define SERIAL_PORT1_BASE_ADDRESS	0xA6FC0000
+
+#define SERIAL_IRQ	XIRQ0	/* Dual serial (PC16552)	(Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS						\
+	{								\
+	.baud_base		= BASE_BAUD,				\
+	.irq			= SERIAL_IRQ,				\
+	.flags			= STD_COM_FLAGS,			\
+	.iomem_base		= (u8 *) SERIAL_PORT0_BASE_ADDRESS,	\
+	.iomem_reg_shift	= 2,					\
+	.io_type		= SERIAL_IO_MEM,			\
+	},								\
+	{								\
+	.baud_base		= BASE_BAUD,				\
+	.irq			= SERIAL_IRQ,				\
+	.flags			= STD_COM_FLAGS,			\
+	.iomem_base		= (u8 *) SERIAL_PORT1_BASE_ADDRESS,	\
+	.iomem_reg_shift	= 2,					\
+	.io_type		= SERIAL_IO_MEM,			\
+	},
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ	SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#define GDBPORT_SERIAL_RX	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR	__SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ	SERIAL_IRQ
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define LSR_WAIT_FOR(STATE)					\
+do {								\
+	while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {}	\
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)					\
+do {								\
+	while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {}	\
+} while (0)
+#define FLOWCTL_CLEAR(LINE)			\
+do {						\
+	GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE;	\
+} while (0)
+#define FLOWCTL_SET(LINE)			\
+do {						\
+	GDBPORT_SERIAL_MCR |= UART_MCR_##LINE;	\
+} while (0)
+#define FLOWCTL_QUERY(LINE)	({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+	char ch;
+
+	FLOWCTL_SET(DTR);
+
+	for (; n > 0; n--) {
+		LSR_WAIT_FOR(THRE);
+		FLOWCTL_WAIT_FOR(CTS);
+
+		ch = *p++;
+		if (ch == 0x0a) {
+			GDBPORT_SERIAL_TX = 0x0d;
+			LSR_WAIT_FOR(THRE);
+			FLOWCTL_WAIT_FOR(CTS);
+		}
+		GDBPORT_SERIAL_TX = ch;
+	}
+
+	FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/smc91111.h b/arch/mn10300/include/asm/unit-asb2303/smc91111.h
new file mode 100644
index 0000000..dd456e9
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2303/smc91111.h
@@ -0,0 +1,50 @@
+/* Support for the SMC91C111 NIC on an ASB2303
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SMC91111_H
+#define _ASM_UNIT_SMC91111_H
+
+#include <asm/intctl-regs.h>
+
+#define SMC91111_BASE		0xAA000300UL
+#define SMC91111_BASE_END	0xAA000400UL
+#define SMC91111_IRQ		XIRQ3
+
+#define SMC_CAN_USE_8BIT	0
+#define SMC_CAN_USE_16BIT	1
+#define SMC_CAN_USE_32BIT	0
+#define SMC_NOWAIT		1
+#define SMC_IRQ_FLAGS		(0)
+
+#if SMC_CAN_USE_8BIT
+#define SMC_inb(a, r)		inb((unsigned long) ((a) + (r)))
+#define SMC_outb(v, a, r)	outb(v, (unsigned long) ((a) + (r)))
+#endif
+
+#if SMC_CAN_USE_16BIT
+#define SMC_inw(a, r)		inw((unsigned long) ((a) + (r)))
+#define SMC_outw(v, a, r)	outw(v, (unsigned long) ((a) + (r)))
+#define SMC_insw(a, r, p, l)	insw((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsw(a, r, p, l)	outsw((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#if SMC_CAN_USE_32BIT
+#define SMC_inl(a, r)		inl((unsigned long) ((a) + (r)))
+#define SMC_outl(v, a, r)	outl(v, (unsigned long) ((a) + (r)))
+#define SMC_insl(a, r, p, l)	insl((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsl(a, r, p, l)	outsl((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#define RPC_LSA_DEFAULT		RPC_LED_100_10
+#define RPC_LSB_DEFAULT		RPC_LED_TX_RX
+
+#define set_irq_type(irq, type)
+
+#endif /*  _ASM_UNIT_SMC91111_H */
diff --git a/arch/mn10300/include/asm/unit-asb2303/timex.h b/arch/mn10300/include/asm/unit-asb2303/timex.h
new file mode 100644
index 0000000..7e54b0c
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2303/timex.h
@@ -0,0 +1,135 @@
+/* ASB2303-specific timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/timer-regs.h>
+#include <asm/unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define	TMJCBR_MAX		0xffff
+#define	TMJCBC			TM01BC
+
+#define	TMJCMD			TM01MD
+#define	TMJCBR			TM01BR
+#define	TMJCIRQ			TM1IRQ
+#define	TMJCICR			TM1ICR
+#define	TMJCICR_LEVEL		GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+	unsigned rate;
+	u16 md, t16;
+
+	/* use as little prescaling as possible to avoid losing accuracy */
+	md = TM0MD_SRC_IOCLK;
+	rate = MN10300_JCCLK / HZ;
+
+	if (rate > TMJCBR_MAX) {
+		md = TM0MD_SRC_IOCLK_8;
+		rate = MN10300_JCCLK / 8 / HZ;
+
+		if (rate > TMJCBR_MAX) {
+			md = TM0MD_SRC_IOCLK_32;
+			rate = MN10300_JCCLK / 32 / HZ;
+
+			if (rate > TMJCBR_MAX)
+				BUG();
+		}
+	}
+
+	TMJCBR = rate - 1;
+	t16 = TMJCBR;
+
+	TMJCMD =
+		md |
+		TM1MD_SRC_TM0CASCADE << 8 |
+		TM0MD_INIT_COUNTER |
+		TM1MD_INIT_COUNTER << 8;
+
+	TMJCMD =
+		md |
+		TM1MD_SRC_TM0CASCADE << 8 |
+		TM0MD_COUNT_ENABLE |
+		TM1MD_COUNT_ENABLE << 8;
+
+	t16 = TMJCMD;
+
+	TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+	t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define	TMTSCBR_MAX		0xffffffff
+#define	TMTSCBC			TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+	/* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+	 * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+	 */
+	TM45BR = TMTSCBR_MAX;
+
+	TM4MD = TM4MD_SRC_IOCLK;
+	TM4MD |= TM4MD_INIT_COUNTER;
+	TM4MD &= ~TM4MD_INIT_COUNTER;
+	TM4ICR = 0;
+
+	TM5MD = TM5MD_SRC_TM4CASCADE;
+	TM5MD |= TM5MD_INIT_COUNTER;
+	TM5MD &= ~TM5MD_INIT_COUNTER;
+	TM5ICR = 0;
+
+	TM5MD |= TM5MD_COUNT_ENABLE;
+	TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+	TM4MD = 0;
+	TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+	return (cycles_t)TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/clock.h b/arch/mn10300/include/asm/unit-asb2305/clock.h
new file mode 100644
index 0000000..7d51484
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2305/clock.h
@@ -0,0 +1,45 @@
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk;	/* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK		((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK	((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK		33333333UL
+/* #define MN10300_IOBCLK	66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK		MN10300_IOCLK
+#define MN10300_TSCCLK		MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ	((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ	(MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/leds.h b/arch/mn10300/include/asm/unit-asb2305/leds.h
new file mode 100644
index 0000000..bc471f6
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2305/leds.h
@@ -0,0 +1,51 @@
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2305_7SEGLEDS	__SYSREG(0xA6F90000, u32)
+
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset()		\
+do {						\
+	P0OUT &= 0xbf;				\
+	P0MD = (P0MD & P0MD_6) | P0MD_6_OUT;	\
+} while (0)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds			\
+	mov	0x43077f1d,d0		;	\
+	mov	d0,(ASB2305_7SEGLEDS)
+
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF)				\
+do {								\
+	ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f;	\
+} while (0)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/serial.h b/arch/mn10300/include/asm/unit-asb2305/serial.h
new file mode 100644
index 0000000..73d31d6
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2305/serial.h
@@ -0,0 +1,120 @@
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu/cpu-regs.h>
+#include <asm/proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS	0xA6FB0000
+#define ASB2305_DEBUG_MCR	__SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+
+#define SERIAL_IRQ	XIRQ0	/* Dual serial (PC16552)	(Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS						\
+	{								\
+	.baud_base		= BASE_BAUD,				\
+	.irq			= SERIAL_IRQ,				\
+	.flags			= STD_COM_FLAGS,			\
+	.iomem_base		= (u8 *) SERIAL_PORT0_BASE_ADDRESS,	\
+	.iomem_reg_shift	= 2,					\
+	.io_type		= SERIAL_IO_MEM,			\
+	},
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX  * 4, u8)
+#define GDBPORT_SERIAL_TX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define GDBPORT_SERIAL_DLL	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ	SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define TTYS0_TX	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX  * 4, u8)
+#define TTYS0_MCR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR	__SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+
+#define LSR_WAIT_FOR(STATE)				\
+do {							\
+	while (!(TTYS0_LSR & UART_LSR_##STATE)) {}	\
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE)				\
+do {							\
+	while (!(TTYS0_MSR & UART_MSR_##LINE)) {}	\
+} while (0)
+#define FLOWCTL_CLEAR(LINE)			\
+do {						\
+	TTYS0_MCR &= ~UART_MCR_##LINE;		\
+} while (0)
+#define FLOWCTL_SET(LINE)			\
+do {						\
+	TTYS0_MCR |= UART_MCR_##LINE;		\
+} while (0)
+#define FLOWCTL_QUERY(LINE)	({ TTYS0_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+	char ch;
+
+	FLOWCTL_SET(DTR);
+
+	for (; n > 0; n--) {
+		LSR_WAIT_FOR(THRE);
+		FLOWCTL_WAIT_FOR(CTS);
+
+		ch = *p++;
+		if (ch == 0x0a) {
+			TTYS0_TX = 0x0d;
+			LSR_WAIT_FOR(THRE);
+			FLOWCTL_WAIT_FOR(CTS);
+		}
+		TTYS0_TX = ch;
+	}
+
+	FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/arch/mn10300/include/asm/unit-asb2305/timex.h b/arch/mn10300/include/asm/unit-asb2305/timex.h
new file mode 100644
index 0000000..10e1bfe
--- /dev/null
+++ b/arch/mn10300/include/asm/unit-asb2305/timex.h
@@ -0,0 +1,135 @@
+/* ASB2305 timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/cpu/timer-regs.h>
+#include <asm/unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define	TMJCBR_MAX		0xffff
+#define	TMJCBC			TM01BC
+
+#define	TMJCMD			TM01MD
+#define	TMJCBR			TM01BR
+#define	TMJCIRQ			TM1IRQ
+#define	TMJCICR			TM1ICR
+#define	TMJCICR_LEVEL		GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+	unsigned rate;
+	u16 md, t16;
+
+	/* use as little prescaling as possible to avoid losing accuracy */
+	md = TM0MD_SRC_IOCLK;
+	rate = MN10300_JCCLK / HZ;
+
+	if (rate > TMJCBR_MAX) {
+		md = TM0MD_SRC_IOCLK_8;
+		rate = MN10300_JCCLK / 8 / HZ;
+
+		if (rate > TMJCBR_MAX) {
+			md = TM0MD_SRC_IOCLK_32;
+			rate = MN10300_JCCLK / 32 / HZ;
+
+			if (rate > TMJCBR_MAX)
+				BUG();
+		}
+	}
+
+	TMJCBR = rate - 1;
+	t16 = TMJCBR;
+
+	TMJCMD =
+		md |
+		TM1MD_SRC_TM0CASCADE << 8 |
+		TM0MD_INIT_COUNTER |
+		TM1MD_INIT_COUNTER << 8;
+
+	TMJCMD =
+		md |
+		TM1MD_SRC_TM0CASCADE << 8 |
+		TM0MD_COUNT_ENABLE |
+		TM1MD_COUNT_ENABLE << 8;
+
+	t16 = TMJCMD;
+
+	TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+	t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define	TMTSCBR_MAX		0xffffffff
+#define	TMTSCBC			TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+	/* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+	 * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+	 */
+	TM45BR = TMTSCBR_MAX;
+
+	TM4MD = TM4MD_SRC_IOCLK;
+	TM4MD |= TM4MD_INIT_COUNTER;
+	TM4MD &= ~TM4MD_INIT_COUNTER;
+	TM4ICR = 0;
+
+	TM5MD = TM5MD_SRC_TM4CASCADE;
+	TM5MD |= TM5MD_INIT_COUNTER;
+	TM5MD &= ~TM5MD_INIT_COUNTER;
+	TM5ICR = 0;
+
+	TM5MD |= TM5MD_COUNT_ENABLE;
+	TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+	TM4MD = 0;
+	TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+	return (cycles_t) TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/arch/mn10300/include/asm/user.h b/arch/mn10300/include/asm/user.h
new file mode 100644
index 0000000..e119390
--- /dev/null
+++ b/arch/mn10300/include/asm/user.h
@@ -0,0 +1,53 @@
+/* MN10300 User process data
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <linux/ptrace.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * When the kernel dumps core, it starts by dumping the user struct - this will
+ * be used by gdb to figure out where the data and stack segments are within
+ * the file, and what virtual addresses to use.
+ */
+struct user {
+	/* We start with the registers, to mimic the way that "memory" is
+	 * returned from the ptrace(3,...) function.
+	 */
+	struct pt_regs regs;		/* Where the registers are actually stored */
+
+	/* The rest of this junk is to help gdb figure out what goes where */
+	unsigned long int u_tsize;	/* Text segment size (pages). */
+	unsigned long int u_dsize;	/* Data segment size (pages). */
+	unsigned long int u_ssize;	/* Stack segment size (pages). */
+	unsigned long start_code;	/* Starting virtual address of text. */
+	unsigned long start_stack;	/* Starting virtual address of stack area.
+					   This is actually the bottom of the stack,
+					   the top of the stack is always found in the
+					   esp register.  */
+	long int signal;		/* Signal that caused the core dump. */
+	int reserved;			/* No longer used */
+	struct user_pt_regs *u_ar0;	/* Used by gdb to help find the values for */
+
+	/* the registers */
+	unsigned long magic;		/* To uniquely identify a core file */
+	char u_comm[32];		/* User command that was responsible */
+};
+#endif
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR	+(u.start_code)
+#define HOST_STACK_END_ADDR	+(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_USER_H */
diff --git a/arch/mn10300/include/asm/vga.h b/arch/mn10300/include/asm/vga.h
new file mode 100644
index 0000000..0163e50
--- /dev/null
+++ b/arch/mn10300/include/asm/vga.h
@@ -0,0 +1,17 @@
+/* MN10300 VGA register definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+
+
+#endif /* _ASM_VGA_H */
diff --git a/arch/mn10300/include/asm/xor.h b/arch/mn10300/include/asm/xor.h
new file mode 100644
index 0000000..c82eb12
--- /dev/null
+++ b/arch/mn10300/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>