Merge branch 'linus' into x86/apic-cleanups

Conflicts:
	arch/x86/include/asm/io_apic.h

Merge reason: Resolve the conflict, update to a more recent -rc base

Signed-off-by: Ingo Molnar <mingo@elte.hu>

7 files changed, 96 insertions, 693 deletions

diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index 910f20b..3966b56 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -3,10 +3,7 @@
 #
 
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o probe_$(BITS).o ipi.o
-ifneq ($(CONFIG_HARDLOCKUP_DETECTOR),y)
-obj-$(CONFIG_X86_LOCAL_APIC)	+= nmi.o
-endif
-obj-$(CONFIG_HARDLOCKUP_DETECTOR)	+= hw_nmi.o
+obj-y				+= hw_nmi.o
 
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index c0f6426..ce65d44 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -31,7 +31,6 @@
 #include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/dmi.h>
-#include <linux/nmi.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
 
@@ -432,17 +431,18 @@ int setup_APIC_eilvt(u8 offset, u8 vector, u8 msg_type, u8 mask)
 	reserved = reserve_eilvt_offset(offset, new);
 
 	if (reserved != new) {
-		pr_err(FW_BUG "cpu %d, try to setup vector 0x%x, but "
-		       "vector 0x%x was already reserved by another core, "
-		       "APIC%lX=0x%x\n",
-		       smp_processor_id(), new, reserved, reg, old);
+		pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for "
+		       "vector 0x%x, but the register is already in use for "
+		       "vector 0x%x on another cpu\n",
+		       smp_processor_id(), reg, offset, new, reserved);
 		return -EINVAL;
 	}
 
 	if (!eilvt_entry_is_changeable(old, new)) {
-		pr_err(FW_BUG "cpu %d, try to setup vector 0x%x but "
-		       "register already in use, APIC%lX=0x%x\n",
-		       smp_processor_id(), new, reg, old);
+		pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for "
+		       "vector 0x%x, but the register is already in use for "
+		       "vector 0x%x on this cpu\n",
+		       smp_processor_id(), reg, offset, new, old);
 		return -EBUSY;
 	}
 
@@ -799,11 +799,7 @@ void __init setup_boot_APIC_clock(void)
 	 * PIT/HPET going.  Otherwise register lapic as a dummy
 	 * device.
 	 */
-	if (nmi_watchdog != NMI_IO_APIC)
-		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
-	else
-		pr_warning("APIC timer registered as dummy,"
-			" due to nmi_watchdog=%d!\n", nmi_watchdog);
+	lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
 
 	/* Setup the lapic or request the broadcast */
 	setup_APIC_timer();
@@ -1384,8 +1380,15 @@ void __cpuinit end_local_APIC_setup(void)
 	}
 #endif
 
-	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
+
+	/*
+	 * Now that local APIC setup is completed for BP, configure the fault
+	 * handling for interrupt remapping.
+	 */
+	if (!smp_processor_id() && intr_remapping_enabled)
+		enable_drhd_fault_handling();
+
 }
 
 #ifdef CONFIG_X86_X2APIC
@@ -1694,7 +1697,7 @@ void __init register_lapic_address(unsigned long address)
  * This initializes the IO-APIC and APIC hardware if this is
  * a UP kernel.
  */
-int apic_version[MAX_APICS];
+int apic_version[MAX_LOCAL_APIC];
 
 int __init APIC_init_uniprocessor(void)
 {
@@ -1759,17 +1762,10 @@ int __init APIC_init_uniprocessor(void)
 		setup_IO_APIC();
 	else {
 		nr_ioapics = 0;
-		localise_nmi_watchdog();
 	}
-#else
-	localise_nmi_watchdog();
 #endif
 
 	x86_init.timers.setup_percpu_clockev();
-#ifdef CONFIG_X86_64
-	check_nmi_watchdog();
-#endif
-
 	return 0;
 }
 
diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
index cefd694..72ec29e 100644
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -17,19 +17,31 @@
 #include <linux/nmi.h>
 #include <linux/module.h>
 
-/* For reliability, we're prepared to waste bits here. */
-static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
-
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
 u64 hw_nmi_get_sample_period(void)
 {
 	return (u64)(cpu_khz) * 1000 * 60;
 }
+#endif
+
+#ifdef arch_trigger_all_cpu_backtrace
+/* For reliability, we're prepared to waste bits here. */
+static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
+
+/* "in progress" flag of arch_trigger_all_cpu_backtrace */
+static unsigned long backtrace_flag;
 
-#ifdef ARCH_HAS_NMI_WATCHDOG
 void arch_trigger_all_cpu_backtrace(void)
 {
 	int i;
 
+	if (test_and_set_bit(0, &backtrace_flag))
+		/*
+		 * If there is already a trigger_all_cpu_backtrace() in progress
+		 * (backtrace_flag == 1), don't output double cpu dump infos.
+		 */
+		return;
+
 	cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask);
 
 	printk(KERN_INFO "sending NMI to all CPUs:\n");
@@ -41,6 +53,9 @@ void arch_trigger_all_cpu_backtrace(void)
 			break;
 		mdelay(1);
 	}
+
+	clear_bit(0, &backtrace_flag);
+	smp_mb__after_clear_bit();
 }
 
 static int __kprobes
@@ -49,7 +64,7 @@ arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self,
 {
 	struct die_args *args = __args;
 	struct pt_regs *regs;
-	int cpu = smp_processor_id();
+	int cpu;
 
 	switch (cmd) {
 	case DIE_NMI:
@@ -61,6 +76,7 @@ arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self,
 	}
 
 	regs = args->regs;
+	cpu = smp_processor_id();
 
 	if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
 		static arch_spinlock_t lock = __ARCH_SPIN_LOCK_UNLOCKED;
@@ -90,18 +106,3 @@ static int __init register_trigger_all_cpu_backtrace(void)
 }
 early_initcall(register_trigger_all_cpu_backtrace);
 #endif
-
-/* STUB calls to mimic old nmi_watchdog behaviour */
-#if defined(CONFIG_X86_LOCAL_APIC)
-unsigned int nmi_watchdog = NMI_NONE;
-EXPORT_SYMBOL(nmi_watchdog);
-void acpi_nmi_enable(void) { return; }
-void acpi_nmi_disable(void) { return; }
-#endif
-atomic_t nmi_active = ATOMIC_INIT(0);           /* oprofile uses this */
-EXPORT_SYMBOL(nmi_active);
-int unknown_nmi_panic;
-void cpu_nmi_set_wd_enabled(void) { return; }
-void stop_apic_nmi_watchdog(void *unused) { return; }
-void setup_apic_nmi_watchdog(void *unused) { return; }
-int __init check_nmi_watchdog(void) { return 0; }
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index bb61a55..52735a7 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -54,7 +54,6 @@
 #include <asm/dma.h>
 #include <asm/timer.h>
 #include <asm/i8259.h>
-#include <asm/nmi.h>
 #include <asm/msidef.h>
 #include <asm/hypertransport.h>
 #include <asm/setup.h>
@@ -2458,13 +2457,12 @@ static void ack_apic_level(struct irq_data *data)
 {
 	struct irq_cfg *cfg = data->chip_data;
 	int i, do_unmask_irq = 0, irq = data->irq;
-	struct irq_desc *desc = irq_to_desc(irq);
 	unsigned long v;
 
 	irq_complete_move(cfg);
 #ifdef CONFIG_GENERIC_PENDING_IRQ
 	/* If we are moving the irq we need to mask it */
-	if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
+	if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) {
 		do_unmask_irq = 1;
 		mask_ioapic(cfg);
 	}
@@ -2671,24 +2669,6 @@ static void lapic_register_intr(int irq)
 				      "edge");
 }
 
-static void __init setup_nmi(void)
-{
-	/*
-	 * Dirty trick to enable the NMI watchdog ...
-	 * We put the 8259A master into AEOI mode and
-	 * unmask on all local APICs LVT0 as NMI.
-	 *
-	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
-	 * is from Maciej W. Rozycki - so we do not have to EOI from
-	 * the NMI handler or the timer interrupt.
-	 */
-	apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
-
-	enable_NMI_through_LVT0();
-
-	apic_printk(APIC_VERBOSE, " done.\n");
-}
-
 /*
  * This looks a bit hackish but it's about the only one way of sending
  * a few INTA cycles to 8259As and any associated glue logic.  ICR does
@@ -2794,15 +2774,6 @@ static inline void __init check_timer(void)
 	 */
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	legacy_pic->init(1);
-#ifdef CONFIG_X86_32
-	{
-		unsigned int ver;
-
-		ver = apic_read(APIC_LVR);
-		ver = GET_APIC_VERSION(ver);
-		timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
-	}
-#endif
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
@@ -2850,10 +2821,6 @@ static inline void __init check_timer(void)
 				unmask_ioapic(cfg);
 		}
 		if (timer_irq_works()) {
-			if (nmi_watchdog == NMI_IO_APIC) {
-				setup_nmi();
-				legacy_pic->unmask(0);
-			}
 			if (disable_timer_pin_1 > 0)
 				clear_IO_APIC_pin(0, pin1);
 			goto out;
@@ -2879,11 +2846,6 @@ static inline void __init check_timer(void)
 		if (timer_irq_works()) {
 			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
 			timer_through_8259 = 1;
-			if (nmi_watchdog == NMI_IO_APIC) {
-				legacy_pic->mask(0);
-				setup_nmi();
-				legacy_pic->unmask(0);
-			}
 			goto out;
 		}
 		/*
@@ -2895,15 +2857,6 @@ static inline void __init check_timer(void)
 		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
 	}
 
-	if (nmi_watchdog == NMI_IO_APIC) {
-		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
-			    "through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = NMI_NONE;
-	}
-#ifdef CONFIG_X86_32
-	timer_ack = 0;
-#endif
-
 	apic_printk(APIC_QUIET, KERN_INFO
 		    "...trying to set up timer as Virtual Wire IRQ...\n");
 
@@ -3441,6 +3394,7 @@ dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	msg.data |= MSI_DATA_VECTOR(cfg->vector);
 	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
 	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+	msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest);
 
 	dmar_msi_write(irq, &msg);
 
@@ -4133,7 +4087,8 @@ void __init pre_init_apic_IRQ0(void)
 
 	printk(KERN_INFO "Early APIC setup for system timer0\n");
 #ifndef CONFIG_SMP
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	physid_set_mask_of_physid(boot_cpu_physical_apicid,
+					 &phys_cpu_present_map);
 #endif
 	/* Make sure the irq descriptor is set up */
 	cfg = alloc_irq_and_cfg_at(0, 0);
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
deleted file mode 100644
index c90041c..0000000
--- a/arch/x86/kernel/apic/nmi.c
+++ /dev/null
@@ -1,567 +0,0 @@
-/*
- *  NMI watchdog support on APIC systems
- *
- *  Started by Ingo Molnar <mingo@redhat.com>
- *
- *  Fixes:
- *  Mikael Pettersson	: AMD K7 support for local APIC NMI watchdog.
- *  Mikael Pettersson	: Power Management for local APIC NMI watchdog.
- *  Mikael Pettersson	: Pentium 4 support for local APIC NMI watchdog.
- *  Pavel Machek and
- *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
- */
-
-#include <asm/apic.h>
-
-#include <linux/nmi.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/sysdev.h>
-#include <linux/sysctl.h>
-#include <linux/percpu.h>
-#include <linux/kprobes.h>
-#include <linux/cpumask.h>
-#include <linux/kernel_stat.h>
-#include <linux/kdebug.h>
-#include <linux/smp.h>
-
-#include <asm/i8259.h>
-#include <asm/io_apic.h>
-#include <asm/proto.h>
-#include <asm/timer.h>
-
-#include <asm/mce.h>
-
-#include <asm/mach_traps.h>
-
-int unknown_nmi_panic;
-int nmi_watchdog_enabled;
-
-/* For reliability, we're prepared to waste bits here. */
-static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
-
-/* nmi_active:
- * >0: the lapic NMI watchdog is active, but can be disabled
- * <0: the lapic NMI watchdog has not been set up, and cannot
- *     be enabled
- *  0: the lapic NMI watchdog is disabled, but can be enabled
- */
-atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
-EXPORT_SYMBOL(nmi_active);
-
-unsigned int nmi_watchdog = NMI_NONE;
-EXPORT_SYMBOL(nmi_watchdog);
-
-static int panic_on_timeout;
-
-static unsigned int nmi_hz = HZ;
-static DEFINE_PER_CPU(short, wd_enabled);
-static int endflag __initdata;
-
-static inline unsigned int get_nmi_count(int cpu)
-{
-	return per_cpu(irq_stat, cpu).__nmi_count;
-}
-
-static inline int mce_in_progress(void)
-{
-#if defined(CONFIG_X86_MCE)
-	return atomic_read(&mce_entry) > 0;
-#endif
-	return 0;
-}
-
-/*
- * Take the local apic timer and PIT/HPET into account. We don't
- * know which one is active, when we have highres/dyntick on
- */
-static inline unsigned int get_timer_irqs(int cpu)
-{
-	return per_cpu(irq_stat, cpu).apic_timer_irqs +
-		per_cpu(irq_stat, cpu).irq0_irqs;
-}
-
-#ifdef CONFIG_SMP
-/*
- * The performance counters used by NMI_LOCAL_APIC don't trigger when
- * the CPU is idle. To make sure the NMI watchdog really ticks on all
- * CPUs during the test make them busy.
- */
-static __init void nmi_cpu_busy(void *data)
-{
-	local_irq_enable_in_hardirq();
-	/*
-	 * Intentionally don't use cpu_relax here. This is
-	 * to make sure that the performance counter really ticks,
-	 * even if there is a simulator or similar that catches the
-	 * pause instruction. On a real HT machine this is fine because
-	 * all other CPUs are busy with "useless" delay loops and don't
-	 * care if they get somewhat less cycles.
-	 */
-	while (endflag == 0)
-		mb();
-}
-#endif
-
-static void report_broken_nmi(int cpu, unsigned int *prev_nmi_count)
-{
-	printk(KERN_CONT "\n");
-
-	printk(KERN_WARNING
-		"WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
-			cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
-
-	printk(KERN_WARNING
-		"Please report this to bugzilla.kernel.org,\n");
-	printk(KERN_WARNING
-		"and attach the output of the 'dmesg' command.\n");
-
-	per_cpu(wd_enabled, cpu) = 0;
-	atomic_dec(&nmi_active);
-}
-
-static void __acpi_nmi_disable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
-}
-
-int __init check_nmi_watchdog(void)
-{
-	unsigned int *prev_nmi_count;
-	int cpu;
-
-	if (!nmi_watchdog_active() || !atomic_read(&nmi_active))
-		return 0;
-
-	prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL);
-	if (!prev_nmi_count)
-		goto error;
-
-	printk(KERN_INFO "Testing NMI watchdog ... ");
-
-#ifdef CONFIG_SMP
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0);
-#endif
-
-	for_each_possible_cpu(cpu)
-		prev_nmi_count[cpu] = get_nmi_count(cpu);
-	local_irq_enable();
-	mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
-
-	for_each_online_cpu(cpu) {
-		if (!per_cpu(wd_enabled, cpu))
-			continue;
-		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
-			report_broken_nmi(cpu, prev_nmi_count);
-	}
-	endflag = 1;
-	if (!atomic_read(&nmi_active)) {
-		kfree(prev_nmi_count);
-		atomic_set(&nmi_active, -1);
-		goto error;
-	}
-	printk("OK.\n");
-
-	/*
-	 * now that we know it works we can reduce NMI frequency to
-	 * something more reasonable; makes a difference in some configs
-	 */
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		nmi_hz = lapic_adjust_nmi_hz(1);
-
-	kfree(prev_nmi_count);
-	return 0;
-error:
-	if (nmi_watchdog == NMI_IO_APIC) {
-		if (!timer_through_8259)
-			legacy_pic->mask(0);
-		on_each_cpu(__acpi_nmi_disable, NULL, 1);
-	}
-
-#ifdef CONFIG_X86_32
-	timer_ack = 0;
-#endif
-	return -1;
-}
-
-static int __init setup_nmi_watchdog(char *str)
-{
-	unsigned int nmi;
-
-	if (!strncmp(str, "panic", 5)) {
-		panic_on_timeout = 1;
-		str = strchr(str, ',');
-		if (!str)
-			return 1;
-		++str;
-	}
-
-	if (!strncmp(str, "lapic", 5))
-		nmi_watchdog = NMI_LOCAL_APIC;
-	else if (!strncmp(str, "ioapic", 6))
-		nmi_watchdog = NMI_IO_APIC;
-	else {
-		get_option(&str, &nmi);
-		if (nmi >= NMI_INVALID)
-			return 0;
-		nmi_watchdog = nmi;
-	}
-
-	return 1;
-}
-__setup("nmi_watchdog=", setup_nmi_watchdog);
-
-/*
- * Suspend/resume support
- */
-#ifdef CONFIG_PM
-
-static int nmi_pm_active; /* nmi_active before suspend */
-
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	nmi_pm_active = atomic_read(&nmi_active);
-	stop_apic_nmi_watchdog(NULL);
-	BUG_ON(atomic_read(&nmi_active) != 0);
-	return 0;
-}
-
-static int lapic_nmi_resume(struct sys_device *dev)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	if (nmi_pm_active > 0) {
-		setup_apic_nmi_watchdog(NULL);
-		touch_nmi_watchdog();
-	}
-	return 0;
-}
-
-static struct sysdev_class nmi_sysclass = {
-	.name		= "lapic_nmi",
-	.resume		= lapic_nmi_resume,
-	.suspend	= lapic_nmi_suspend,
-};
-
-static struct sys_device device_lapic_nmi = {
-	.id	= 0,
-	.cls	= &nmi_sysclass,
-};
-
-static int __init init_lapic_nmi_sysfs(void)
-{
-	int error;
-
-	/*
-	 * should really be a BUG_ON but b/c this is an
-	 * init call, it just doesn't work.  -dcz
-	 */
-	if (nmi_watchdog != NMI_LOCAL_APIC)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0)
-		return 0;
-
-	error = sysdev_class_register(&nmi_sysclass);
-	if (!error)
-		error = sysdev_register(&device_lapic_nmi);
-	return error;
-}
-
-/* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_sysfs);
-
-#endif	/* CONFIG_PM */
-
-static void __acpi_nmi_enable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI);
-}
-
-/*
- * Enable timer based NMIs on all CPUs:
- */
-void acpi_nmi_enable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_enable, NULL, 1);
-}
-
-/*
- * Disable timer based NMIs on all CPUs:
- */
-void acpi_nmi_disable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_disable, NULL, 1);
-}
-
-/*
- * This function is called as soon the LAPIC NMI watchdog driver has everything
- * in place and it's ready to check if the NMIs belong to the NMI watchdog
- */
-void cpu_nmi_set_wd_enabled(void)
-{
-	__get_cpu_var(wd_enabled) = 1;
-}
-
-void setup_apic_nmi_watchdog(void *unused)
-{
-	if (__get_cpu_var(wd_enabled))
-		return;
-
-	/* cheap hack to support suspend/resume */
-	/* if cpu0 is not active neither should the other cpus */
-	if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0)
-		return;
-
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		if (lapic_watchdog_init(nmi_hz) < 0) {
-			__get_cpu_var(wd_enabled) = 0;
-			return;
-		}
-		/* FALL THROUGH */
-	case NMI_IO_APIC:
-		__get_cpu_var(wd_enabled) = 1;
-		atomic_inc(&nmi_active);
-	}
-}
-
-void stop_apic_nmi_watchdog(void *unused)
-{
-	/* only support LOCAL and IO APICs for now */
-	if (!nmi_watchdog_active())
-		return;
-	if (__get_cpu_var(wd_enabled) == 0)
-		return;
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		lapic_watchdog_stop();
-	else
-		__acpi_nmi_disable(NULL);
-	__get_cpu_var(wd_enabled) = 0;
-	atomic_dec(&nmi_active);
-}
-
-/*
- * the best way to detect whether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are generated on every CPU, we only
- * have to check the current processor.
- *
- * since NMIs don't listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up here too!]
- */
-
-static DEFINE_PER_CPU(unsigned, last_irq_sum);
-static DEFINE_PER_CPU(long, alert_counter);
-static DEFINE_PER_CPU(int, nmi_touch);
-
-void touch_nmi_watchdog(void)
-{
-	if (nmi_watchdog_active()) {
-		unsigned cpu;
-
-		/*
-		 * Tell other CPUs to reset their alert counters. We cannot
-		 * do it ourselves because the alert count increase is not
-		 * atomic.
-		 */
-		for_each_present_cpu(cpu) {
-			if (per_cpu(nmi_touch, cpu) != 1)
-				per_cpu(nmi_touch, cpu) = 1;
-		}
-	}
-
-	/*
-	 * Tickle the softlockup detector too:
-	 */
-	touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL(touch_nmi_watchdog);
-
-notrace __kprobes int
-nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
-{
-	/*
-	 * Since current_thread_info()-> is always on the stack, and we
-	 * always switch the stack NMI-atomically, it's safe to use
-	 * smp_processor_id().
-	 */
-	unsigned int sum;
-	int touched = 0;
-	int cpu = smp_processor_id();
-	int rc = 0;
-
-	sum = get_timer_irqs(cpu);
-
-	if (__get_cpu_var(nmi_touch)) {
-		__get_cpu_var(nmi_touch) = 0;
-		touched = 1;
-	}
-
-	/* We can be called before check_nmi_watchdog, hence NULL check. */
-	if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
-		static DEFINE_RAW_SPINLOCK(lock); /* Serialise the printks */
-
-		raw_spin_lock(&lock);
-		printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
-		show_regs(regs);
-		dump_stack();
-		raw_spin_unlock(&lock);
-		cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask));
-
-		rc = 1;
-	}
-
-	/* Could check oops_in_progress here too, but it's safer not to */
-	if (mce_in_progress())
-		touched = 1;
-
-	/* if the none of the timers isn't firing, this cpu isn't doing much */
-	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
-		/*
-		 * Ayiee, looks like this CPU is stuck ...
-		 * wait a few IRQs (5 seconds) before doing the oops ...
-		 */
-		__this_cpu_inc(alert_counter);
-		if (__this_cpu_read(alert_counter) == 5 * nmi_hz)
-			/*
-			 * die_nmi will return ONLY if NOTIFY_STOP happens..
-			 */
-			die_nmi("BUG: NMI Watchdog detected LOCKUP",
-				regs, panic_on_timeout);
-	} else {
-		__get_cpu_var(last_irq_sum) = sum;
-		__this_cpu_write(alert_counter, 0);
-	}
-
-	/* see if the nmi watchdog went off */
-	if (!__get_cpu_var(wd_enabled))
-		return rc;
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		rc |= lapic_wd_event(nmi_hz);
-		break;
-	case NMI_IO_APIC:
-		/*
-		 * don't know how to accurately check for this.
-		 * just assume it was a watchdog timer interrupt
-		 * This matches the old behaviour.
-		 */
-		rc = 1;
-		break;
-	}
-	return rc;
-}
-
-#ifdef CONFIG_SYSCTL
-
-static void enable_ioapic_nmi_watchdog_single(void *unused)
-{
-	__get_cpu_var(wd_enabled) = 1;
-	atomic_inc(&nmi_active);
-	__acpi_nmi_enable(NULL);
-}
-
-static void enable_ioapic_nmi_watchdog(void)
-{
-	on_each_cpu(enable_ioapic_nmi_watchdog_single, NULL, 1);
-	touch_nmi_watchdog();
-}
-
-static void disable_ioapic_nmi_watchdog(void)
-{
-	on_each_cpu(stop_apic_nmi_watchdog, NULL, 1);
-}
-
-static int __init setup_unknown_nmi_panic(char *str)
-{
-	unknown_nmi_panic = 1;
-	return 1;
-}
-__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
-	unsigned char reason = get_nmi_reason();
-	char buf[64];
-
-	sprintf(buf, "NMI received for unknown reason %02x\n", reason);
-	die_nmi(buf, regs, 1); /* Always panic here */
-	return 0;
-}
-
-/*
- * proc handler for /proc/sys/kernel/nmi
- */
-int proc_nmi_enabled(struct ctl_table *table, int write,
-			void __user *buffer, size_t *length, loff_t *ppos)
-{
-	int old_state;
-
-	nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
-	old_state = nmi_watchdog_enabled;
-	proc_dointvec(table, write, buffer, length, ppos);
-	if (!!old_state == !!nmi_watchdog_enabled)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0 || !nmi_watchdog_active()) {
-		printk(KERN_WARNING
-			"NMI watchdog is permanently disabled\n");
-		return -EIO;
-	}
-
-	if (nmi_watchdog == NMI_LOCAL_APIC) {
-		if (nmi_watchdog_enabled)
-			enable_lapic_nmi_watchdog();
-		else
-			disable_lapic_nmi_watchdog();
-	} else if (nmi_watchdog == NMI_IO_APIC) {
-		if (nmi_watchdog_enabled)
-			enable_ioapic_nmi_watchdog();
-		else
-			disable_ioapic_nmi_watchdog();
-	} else {
-		printk(KERN_WARNING
-			"NMI watchdog doesn't know what hardware to touch\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-#endif /* CONFIG_SYSCTL */
-
-int do_nmi_callback(struct pt_regs *regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
-	if (unknown_nmi_panic)
-		return unknown_nmi_panic_callback(regs, cpu);
-#endif
-	return 0;
-}
-
-void arch_trigger_all_cpu_backtrace(void)
-{
-	int i;
-
-	cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask);
-
-	printk(KERN_INFO "sending NMI to all CPUs:\n");
-	apic->send_IPI_all(NMI_VECTOR);
-
-	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
-	for (i = 0; i < 10 * 1000; i++) {
-		if (cpumask_empty(to_cpumask(backtrace_mask)))
-			break;
-		mdelay(1);
-	}
-}
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index f9e4e6a..d8c4a6f 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -79,13 +79,6 @@ void __init default_setup_apic_routing(void)
 		/* need to update phys_pkg_id */
 		apic->phys_pkg_id = apicid_phys_pkg_id;
 	}
-
-	/*
-	 * Now that apic routing model is selected, configure the
-	 * fault handling for intr remapping.
-	 */
-	if (intr_remapping_enabled)
-		enable_drhd_fault_handling();
 }
 
 /* Same for both flat and physical. */
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 194539a..2a3f2a7 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -44,8 +44,20 @@ static u64 gru_start_paddr, gru_end_paddr;
 static union uvh_apicid uvh_apicid;
 int uv_min_hub_revision_id;
 EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
+unsigned int uv_apicid_hibits;
+EXPORT_SYMBOL_GPL(uv_apicid_hibits);
 static DEFINE_SPINLOCK(uv_nmi_lock);
 
+static unsigned long __init uv_early_read_mmr(unsigned long addr)
+{
+	unsigned long val, *mmr;
+
+	mmr = early_ioremap(UV_LOCAL_MMR_BASE | addr, sizeof(*mmr));
+	val = *mmr;
+	early_iounmap(mmr, sizeof(*mmr));
+	return val;
+}
+
 static inline bool is_GRU_range(u64 start, u64 end)
 {
 	return start >= gru_start_paddr && end <= gru_end_paddr;
@@ -56,28 +68,24 @@ static bool uv_is_untracked_pat_range(u64 start, u64 end)
 	return is_ISA_range(start, end) || is_GRU_range(start, end);
 }
 
-static int early_get_nodeid(void)
+static int __init early_get_pnodeid(void)
 {
 	union uvh_node_id_u node_id;
-	unsigned long *mmr;
-
-	mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
-	node_id.v = *mmr;
-	early_iounmap(mmr, sizeof(*mmr));
+	union uvh_rh_gam_config_mmr_u  m_n_config;
+	int pnode;
 
 	/* Currently, all blades have same revision number */
+	node_id.v = uv_early_read_mmr(UVH_NODE_ID);
+	m_n_config.v = uv_early_read_mmr(UVH_RH_GAM_CONFIG_MMR);
 	uv_min_hub_revision_id = node_id.s.revision;
 
-	return node_id.s.node_id;
+	pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1);
+	return pnode;
 }
 
 static void __init early_get_apic_pnode_shift(void)
 {
-	unsigned long *mmr;
-
-	mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_APICID, sizeof(*mmr));
-	uvh_apicid.v = *mmr;
-	early_iounmap(mmr, sizeof(*mmr));
+	uvh_apicid.v = uv_early_read_mmr(UVH_APICID);
 	if (!uvh_apicid.v)
 		/*
 		 * Old bios, use default value
@@ -85,12 +93,25 @@ static void __init early_get_apic_pnode_shift(void)
 		uvh_apicid.s.pnode_shift = UV_APIC_PNODE_SHIFT;
 }
 
+/*
+ * Add an extra bit as dictated by bios to the destination apicid of
+ * interrupts potentially passing through the UV HUB.  This prevents
+ * a deadlock between interrupts and IO port operations.
+ */
+static void __init uv_set_apicid_hibit(void)
+{
+	union uvh_lb_target_physical_apic_id_mask_u apicid_mask;
+
+	apicid_mask.v = uv_early_read_mmr(UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK);
+	uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK;
+}
+
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	int nodeid;
+	int pnodeid;
 
 	if (!strcmp(oem_id, "SGI")) {
-		nodeid = early_get_nodeid();
+		pnodeid = early_get_pnodeid();
 		early_get_apic_pnode_shift();
 		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
 		x86_platform.nmi_init = uv_nmi_init;
@@ -100,8 +121,9 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 			uv_system_type = UV_X2APIC;
 		else if (!strcmp(oem_table_id, "UVH")) {
 			__get_cpu_var(x2apic_extra_bits) =
-				nodeid << (uvh_apicid.s.pnode_shift - 1);
+				pnodeid << uvh_apicid.s.pnode_shift;
 			uv_system_type = UV_NON_UNIQUE_APIC;
+			uv_set_apicid_hibit();
 			return 1;
 		}
 	}
@@ -155,6 +177,7 @@ static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_ri
 	int pnode;
 
 	pnode = uv_apicid_to_pnode(phys_apicid);
+	phys_apicid |= uv_apicid_hibits;
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	    ((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
@@ -236,7 +259,7 @@ static unsigned int uv_cpu_mask_to_apicid(const struct cpumask *cpumask)
 	int cpu = cpumask_first(cpumask);
 
 	if ((unsigned)cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_apicid, cpu);
+		return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
 	else
 		return BAD_APICID;
 }
@@ -255,7 +278,7 @@ uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
 			break;
 	}
-	return per_cpu(x86_cpu_to_apicid, cpu);
+	return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
 }
 
 static unsigned int x2apic_get_apic_id(unsigned long x)
@@ -661,27 +684,32 @@ void uv_nmi_init(void)
 void __init uv_system_init(void)
 {
 	union uvh_rh_gam_config_mmr_u  m_n_config;
+	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
 	union uvh_node_id_u node_id;
 	unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
-	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
+	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val, n_io;
 	int gnode_extra, max_pnode = 0;
 	unsigned long mmr_base, present, paddr;
-	unsigned short pnode_mask;
+	unsigned short pnode_mask, pnode_io_mask;
 
 	map_low_mmrs();
 
 	m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
 	m_val = m_n_config.s.m_skt;
 	n_val = m_n_config.s.n_skt;
+	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
+	n_io = mmioh.s.n_io;
 	mmr_base =
 	    uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
 	    ~UV_MMR_ENABLE;
 	pnode_mask = (1 << n_val) - 1;
+	pnode_io_mask = (1 << n_io) - 1;
+
 	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
 	gnode_extra = (node_id.s.node_id & ~((1 << n_val) - 1)) >> 1;
 	gnode_upper = ((unsigned long)gnode_extra  << m_val);
-	printk(KERN_DEBUG "UV: N %d, M %d, gnode_upper 0x%lx, gnode_extra 0x%x\n",
-			n_val, m_val, gnode_upper, gnode_extra);
+	printk(KERN_INFO "UV: N %d, M %d, N_IO: %d, gnode_upper 0x%lx, gnode_extra 0x%x, pnode_mask 0x%x, pnode_io_mask 0x%x\n",
+			n_val, m_val, n_io, gnode_upper, gnode_extra, pnode_mask, pnode_io_mask);
 
 	printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
 
@@ -714,7 +742,7 @@ void __init uv_system_init(void)
 		for (j = 0; j < 64; j++) {
 			if (!test_bit(j, &present))
 				continue;
-			pnode = (i * 64 + j);
+			pnode = (i * 64 + j) & pnode_mask;
 			uv_blade_info[blade].pnode = pnode;
 			uv_blade_info[blade].nr_possible_cpus = 0;
 			uv_blade_info[blade].nr_online_cpus = 0;
@@ -735,6 +763,7 @@ void __init uv_system_init(void)
 		/*
 		 * apic_pnode_shift must be set before calling uv_apicid_to_pnode();
 		 */
+		uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
 		uv_cpu_hub_info(cpu)->apic_pnode_shift = uvh_apicid.s.pnode_shift;
 		pnode = uv_apicid_to_pnode(apicid);
 		blade = boot_pnode_to_blade(pnode);
@@ -751,7 +780,6 @@ void __init uv_system_init(void)
 		uv_cpu_hub_info(cpu)->numa_blade_id = blade;
 		uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
 		uv_cpu_hub_info(cpu)->pnode = pnode;
-		uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
 		uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1;
 		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
 		uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra;
@@ -775,7 +803,7 @@ void __init uv_system_init(void)
 
 	map_gru_high(max_pnode);
 	map_mmr_high(max_pnode);
-	map_mmioh_high(max_pnode);
+	map_mmioh_high(max_pnode & pnode_io_mask);
 
 	uv_cpu_init();
 	uv_scir_register_cpu_notifier();