Merge tag 'v3.5-rc2'

Merge v3.5-rc2 to get latest device tree and dynamic debug changes.

105 files changed, 3126 insertions, 2995 deletions

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 532d2e0..8215e56 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-extra-y                := head_$(BITS).o head$(BITS).o head.o init_task.o vmlinux.lds
+extra-y                := head_$(BITS).o head$(BITS).o head.o vmlinux.lds
 
 CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
 
@@ -35,7 +35,6 @@ obj-y			+= tsc.o io_delay.o rtc.o
 obj-y			+= pci-iommu_table.o
 obj-y			+= resource.o
 
-obj-y				+= trampoline.o trampoline_$(BITS).o
 obj-y				+= process.o
 obj-y				+= i387.o xsave.o
 obj-y				+= ptrace.o
@@ -48,8 +47,6 @@ obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-y				+= cpu/
 obj-y				+= acpi/
 obj-y				+= reboot.o
-obj-$(CONFIG_X86_32)		+= reboot_32.o
-obj-$(CONFIG_MCA)		+= mca_32.o
 obj-$(CONFIG_X86_MSR)		+= msr.o
 obj-$(CONFIG_X86_CPUID)		+= cpuid.o
 obj-$(CONFIG_PCI)		+= early-quirks.o
@@ -101,6 +98,7 @@ obj-$(CONFIG_X86_CHECK_BIOS_CORRUPTION) += check.o
 
 obj-$(CONFIG_SWIOTLB)			+= pci-swiotlb.o
 obj-$(CONFIG_OF)			+= devicetree.o
+obj-$(CONFIG_UPROBES)			+= uprobes.o
 
 ###
 # 64 bit specific files
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
index 6f35260..163b225 100644
--- a/arch/x86/kernel/acpi/Makefile
+++ b/arch/x86/kernel/acpi/Makefile
@@ -1,14 +1,7 @@
-subdir-				:= realmode
-
 obj-$(CONFIG_ACPI)		+= boot.o
-obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup_rm.o wakeup_$(BITS).o
+obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup_$(BITS).o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
 obj-y				+= cstate.o
 endif
 
-$(obj)/wakeup_rm.o:    $(obj)/realmode/wakeup.bin
-
-$(obj)/realmode/wakeup.bin: FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/realmode
-
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index a415b1f..8afb693 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -593,7 +593,7 @@ void __init acpi_set_irq_model_ioapic(void)
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 #include <acpi/processor.h>
 
-static void __cpuinitdata acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+static void __cpuinit acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
 #ifdef CONFIG_ACPI_NUMA
 	int nid;
@@ -990,7 +990,7 @@ void __init mp_config_acpi_legacy_irqs(void)
 	int i;
 	struct mpc_intsrc mp_irq;
 
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+#ifdef CONFIG_EISA
 	/*
 	 * Fabricate the legacy ISA bus (bus #31).
 	 */
diff --git a/arch/x86/kernel/acpi/realmode/.gitignore b/arch/x86/kernel/acpi/realmode/.gitignore
deleted file mode 100644
index 58f1f48..0000000
--- a/arch/x86/kernel/acpi/realmode/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-wakeup.bin
-wakeup.elf
-wakeup.lds
diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile
deleted file mode 100644
index 6a564ac..0000000
--- a/arch/x86/kernel/acpi/realmode/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# arch/x86/kernel/acpi/realmode/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-always		:= wakeup.bin
-targets		:= wakeup.elf wakeup.lds
-
-wakeup-y	+= wakeup.o wakemain.o video-mode.o copy.o bioscall.o regs.o
-
-# The link order of the video-*.o modules can matter.  In particular,
-# video-vga.o *must* be listed first, followed by video-vesa.o.
-# Hardware-specific drivers should follow in the order they should be
-# probed, and video-bios.o should typically be last.
-wakeup-y	+= video-vga.o
-wakeup-y	+= video-vesa.o
-wakeup-y	+= video-bios.o
-
-targets		+= $(wakeup-y)
-
-bootsrc		:= $(src)/../../../boot
-
-# ---------------------------------------------------------------------------
-
-# How to compile the 16-bit code.  Note we always compile for -march=i386,
-# that way we can complain to the user if the CPU is insufficient.
-# Compile with _SETUP since this is similar to the boot-time setup code.
-KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \
-		   -I$(srctree)/$(bootsrc) \
-		   $(cflags-y) \
-		   -Wall -Wstrict-prototypes \
-		   -march=i386 -mregparm=3 \
-		   -include $(srctree)/$(bootsrc)/code16gcc.h \
-		   -fno-strict-aliasing -fomit-frame-pointer \
-		   $(call cc-option, -ffreestanding) \
-		   $(call cc-option, -fno-toplevel-reorder,\
-			$(call cc-option, -fno-unit-at-a-time)) \
-		   $(call cc-option, -fno-stack-protector) \
-		   $(call cc-option, -mpreferred-stack-boundary=2)
-KBUILD_CFLAGS	+= $(call cc-option, -m32)
-KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
-GCOV_PROFILE := n
-
-WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y))
-
-LDFLAGS_wakeup.elf	:= -T
-
-CPPFLAGS_wakeup.lds += -P -C
-
-$(obj)/wakeup.elf: $(obj)/wakeup.lds $(WAKEUP_OBJS) FORCE
-	$(call if_changed,ld)
-
-OBJCOPYFLAGS_wakeup.bin	:= -O binary
-
-$(obj)/wakeup.bin: $(obj)/wakeup.elf FORCE
-	$(call if_changed,objcopy)
diff --git a/arch/x86/kernel/acpi/realmode/bioscall.S b/arch/x86/kernel/acpi/realmode/bioscall.S
deleted file mode 100644
index f51eb0b..0000000
--- a/arch/x86/kernel/acpi/realmode/bioscall.S
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../../boot/bioscall.S"
diff --git a/arch/x86/kernel/acpi/realmode/copy.S b/arch/x86/kernel/acpi/realmode/copy.S
deleted file mode 100644
index dc59ebe..0000000
--- a/arch/x86/kernel/acpi/realmode/copy.S
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../../boot/copy.S"
diff --git a/arch/x86/kernel/acpi/realmode/regs.c b/arch/x86/kernel/acpi/realmode/regs.c
deleted file mode 100644
index 6206033..0000000
--- a/arch/x86/kernel/acpi/realmode/regs.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../../boot/regs.c"
diff --git a/arch/x86/kernel/acpi/realmode/video-bios.c b/arch/x86/kernel/acpi/realmode/video-bios.c
deleted file mode 100644
index 7deabc1..0000000
--- a/arch/x86/kernel/acpi/realmode/video-bios.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../../boot/video-bios.c"
diff --git a/arch/x86/kernel/acpi/realmode/video-mode.c b/arch/x86/kernel/acpi/realmode/video-mode.c
deleted file mode 100644
index 328ad20..0000000
--- a/arch/x86/kernel/acpi/realmode/video-mode.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../../boot/video-mode.c"
diff --git a/arch/x86/kernel/acpi/realmode/video-vesa.c b/arch/x86/kernel/acpi/realmode/video-vesa.c
deleted file mode 100644
index 9dbb967..0000000
--- a/arch/x86/kernel/acpi/realmode/video-vesa.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../../boot/video-vesa.c"
diff --git a/arch/x86/kernel/acpi/realmode/video-vga.c b/arch/x86/kernel/acpi/realmode/video-vga.c
deleted file mode 100644
index bcc8125..0000000
--- a/arch/x86/kernel/acpi/realmode/video-vga.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "../../../boot/video-vga.c"
diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c
deleted file mode 100644
index 883962d..0000000
--- a/arch/x86/kernel/acpi/realmode/wakemain.c
+++ /dev/null
@@ -1,81 +0,0 @@
-#include "wakeup.h"
-#include "boot.h"
-
-static void udelay(int loops)
-{
-	while (loops--)
-		io_delay();	/* Approximately 1 us */
-}
-
-static void beep(unsigned int hz)
-{
-	u8 enable;
-
-	if (!hz) {
-		enable = 0x00;		/* Turn off speaker */
-	} else {
-		u16 div = 1193181/hz;
-
-		outb(0xb6, 0x43);	/* Ctr 2, squarewave, load, binary */
-		io_delay();
-		outb(div, 0x42);	/* LSB of counter */
-		io_delay();
-		outb(div >> 8, 0x42);	/* MSB of counter */
-		io_delay();
-
-		enable = 0x03;		/* Turn on speaker */
-	}
-	inb(0x61);		/* Dummy read of System Control Port B */
-	io_delay();
-	outb(enable, 0x61);	/* Enable timer 2 output to speaker */
-	io_delay();
-}
-
-#define DOT_HZ		880
-#define DASH_HZ		587
-#define US_PER_DOT	125000
-
-/* Okay, this is totally silly, but it's kind of fun. */
-static void send_morse(const char *pattern)
-{
-	char s;
-
-	while ((s = *pattern++)) {
-		switch (s) {
-		case '.':
-			beep(DOT_HZ);
-			udelay(US_PER_DOT);
-			beep(0);
-			udelay(US_PER_DOT);
-			break;
-		case '-':
-			beep(DASH_HZ);
-			udelay(US_PER_DOT * 3);
-			beep(0);
-			udelay(US_PER_DOT);
-			break;
-		default:	/* Assume it's a space */
-			udelay(US_PER_DOT * 3);
-			break;
-		}
-	}
-}
-
-void main(void)
-{
-	/* Kill machine if structures are wrong */
-	if (wakeup_header.real_magic != 0x12345678)
-		while (1);
-
-	if (wakeup_header.realmode_flags & 4)
-		send_morse("...-");
-
-	if (wakeup_header.realmode_flags & 1)
-		asm volatile("lcallw   $0xc000,$3");
-
-	if (wakeup_header.realmode_flags & 2) {
-		/* Need to call BIOS */
-		probe_cards(0);
-		set_mode(wakeup_header.video_mode);
-	}
-}
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S
deleted file mode 100644
index b4fd836..0000000
--- a/arch/x86/kernel/acpi/realmode/wakeup.S
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * ACPI wakeup real mode startup stub
- */
-#include <asm/segment.h>
-#include <asm/msr-index.h>
-#include <asm/page_types.h>
-#include <asm/pgtable_types.h>
-#include <asm/processor-flags.h>
-#include "wakeup.h"
-
-	.code16
-	.section ".jump", "ax"
-	.globl	_start
-_start:
-	cli
-	jmp	wakeup_code
-
-/* This should match the structure in wakeup.h */
-		.section ".header", "a"
-		.globl	wakeup_header
-wakeup_header:
-video_mode:	.short	0	/* Video mode number */
-pmode_return:	.byte	0x66, 0xea	/* ljmpl */
-		.long	0	/* offset goes here */
-		.short	__KERNEL_CS
-pmode_cr0:	.long	0	/* Saved %cr0 */
-pmode_cr3:	.long	0	/* Saved %cr3 */
-pmode_cr4:	.long	0	/* Saved %cr4 */
-pmode_efer:	.quad	0	/* Saved EFER */
-pmode_gdt:	.quad	0
-pmode_misc_en:	.quad	0	/* Saved MISC_ENABLE MSR */
-pmode_behavior:	.long	0	/* Wakeup behavior flags */
-realmode_flags:	.long	0
-real_magic:	.long	0
-trampoline_segment:	.word 0
-_pad1:		.byte	0
-wakeup_jmp:	.byte	0xea	/* ljmpw */
-wakeup_jmp_off:	.word	3f
-wakeup_jmp_seg:	.word	0
-wakeup_gdt:	.quad	0, 0, 0
-signature:	.long	WAKEUP_HEADER_SIGNATURE
-
-	.text
-	.code16
-wakeup_code:
-	cld
-
-	/* Apparently some dimwit BIOS programmers don't know how to
-	   program a PM to RM transition, and we might end up here with
-	   junk in the data segment descriptor registers.  The only way
-	   to repair that is to go into PM and fix it ourselves... */
-	movw	$16, %cx
-	lgdtl	%cs:wakeup_gdt
-	movl	%cr0, %eax
-	orb	$X86_CR0_PE, %al
-	movl	%eax, %cr0
-	jmp	1f
-1:	ljmpw	$8, $2f
-2:
-	movw	%cx, %ds
-	movw	%cx, %es
-	movw	%cx, %ss
-	movw	%cx, %fs
-	movw	%cx, %gs
-
-	andb	$~X86_CR0_PE, %al
-	movl	%eax, %cr0
-	jmp	wakeup_jmp
-3:
-	/* Set up segments */
-	movw	%cs, %ax
-	movw	%ax, %ds
-	movw	%ax, %es
-	movw	%ax, %ss
-	lidtl	wakeup_idt
-
-	movl	$wakeup_stack_end, %esp
-
-	/* Clear the EFLAGS */
-	pushl	$0
-	popfl
-
-	/* Check header signature... */
-	movl	signature, %eax
-	cmpl	$WAKEUP_HEADER_SIGNATURE, %eax
-	jne	bogus_real_magic
-
-	/* Check we really have everything... */
-	movl	end_signature, %eax
-	cmpl	$WAKEUP_END_SIGNATURE, %eax
-	jne	bogus_real_magic
-
-	/* Call the C code */
-	calll	main
-
-	/* Restore MISC_ENABLE before entering protected mode, in case
-	   BIOS decided to clear XD_DISABLE during S3. */
-	movl	pmode_behavior, %eax
-	btl	$WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax
-	jnc	1f
-
-	movl	pmode_misc_en, %eax
-	movl	pmode_misc_en + 4, %edx
-	movl	$MSR_IA32_MISC_ENABLE, %ecx
-	wrmsr
-1:
-
-	/* Do any other stuff... */
-
-#ifndef CONFIG_64BIT
-	/* This could also be done in C code... */
-	movl	pmode_cr3, %eax
-	movl	%eax, %cr3
-
-	movl	pmode_cr4, %ecx
-	jecxz	1f
-	movl	%ecx, %cr4
-1:
-	movl	pmode_efer, %eax
-	movl	pmode_efer + 4, %edx
-	movl	%eax, %ecx
-	orl	%edx, %ecx
-	jz	1f
-	movl	$MSR_EFER, %ecx
-	wrmsr
-1:
-
-	lgdtl	pmode_gdt
-
-	/* This really couldn't... */
-	movl	pmode_cr0, %eax
-	movl	%eax, %cr0
-	jmp	pmode_return
-#else
-	pushw	$0
-	pushw	trampoline_segment
-	pushw	$0
-	lret
-#endif
-
-bogus_real_magic:
-1:
-	hlt
-	jmp	1b
-
-	.data
-	.balign	8
-
-	/* This is the standard real-mode IDT */
-wakeup_idt:
-	.word	0xffff		/* limit */
-	.long	0		/* address */
-	.word	0
-
-	.globl	HEAP, heap_end
-HEAP:
-	.long	wakeup_heap
-heap_end:
-	.long	wakeup_stack
-
-	.bss
-wakeup_heap:
-	.space	2048
-wakeup_stack:
-	.space	2048
-wakeup_stack_end:
-
-	.section ".signature","a"
-end_signature:
-	.long	WAKEUP_END_SIGNATURE
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h
deleted file mode 100644
index 97a29e1..0000000
--- a/arch/x86/kernel/acpi/realmode/wakeup.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Definitions for the wakeup data structure at the head of the
- * wakeup code.
- */
-
-#ifndef ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H
-#define ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-
-/* This must match data at wakeup.S */
-struct wakeup_header {
-	u16 video_mode;		/* Video mode number */
-	u16 _jmp1;		/* ljmpl opcode, 32-bit only */
-	u32 pmode_entry;	/* Protected mode resume point, 32-bit only */
-	u16 _jmp2;		/* CS value, 32-bit only */
-	u32 pmode_cr0;		/* Protected mode cr0 */
-	u32 pmode_cr3;		/* Protected mode cr3 */
-	u32 pmode_cr4;		/* Protected mode cr4 */
-	u32 pmode_efer_low;	/* Protected mode EFER */
-	u32 pmode_efer_high;
-	u64 pmode_gdt;
-	u32 pmode_misc_en_low;	/* Protected mode MISC_ENABLE */
-	u32 pmode_misc_en_high;
-	u32 pmode_behavior;	/* Wakeup routine behavior flags */
-	u32 realmode_flags;
-	u32 real_magic;
-	u16 trampoline_segment;	/* segment with trampoline code, 64-bit only */
-	u8  _pad1;
-	u8  wakeup_jmp;
-	u16 wakeup_jmp_off;
-	u16 wakeup_jmp_seg;
-	u64 wakeup_gdt[3];
-	u32 signature;		/* To check we have correct structure */
-} __attribute__((__packed__));
-
-extern struct wakeup_header wakeup_header;
-#endif
-
-#define WAKEUP_HEADER_OFFSET	8
-#define WAKEUP_HEADER_SIGNATURE 0x51ee1111
-#define WAKEUP_END_SIGNATURE	0x65a22c82
-
-/* Wakeup behavior bits */
-#define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE     0
-
-#endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
deleted file mode 100644
index d4f8010..0000000
--- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * wakeup.ld
- *
- * Linker script for the real-mode wakeup code
- */
-#undef i386
-#include "wakeup.h"
-
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(_start)
-
-SECTIONS
-{
-	. = 0;
-	.jump	: {
-		*(.jump)
-	} = 0x90909090
-
-	. = WAKEUP_HEADER_OFFSET;
-	.header : {
-		*(.header)
-	}
-
-	. = ALIGN(16);
-	.text : {
-		 *(.text*)
-	} = 0x90909090
-
-	. = ALIGN(16);
-	.rodata : {
-		*(.rodata*)
-	}
-
-	.videocards : {
-		video_cards = .;
-		*(.videocards)
-		video_cards_end = .;
-	}
-
-	. = ALIGN(16);
-	.data : {
-		 *(.data*)
-	}
-
-	. = ALIGN(16);
-	.bss :	{
-		__bss_start = .;
-		*(.bss)
-		__bss_end = .;
-	}
-
-	.signature : {
-		*(.signature)
-	}
-
-	_end = .;
-
-	/DISCARD/ : {
-		*(.note*)
-	}
-}
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 103b6ab..95bf99d 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -14,8 +14,9 @@
 #include <asm/desc.h>
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
+#include <asm/realmode.h>
 
-#include "realmode/wakeup.h"
+#include "../../realmode/rm/wakeup.h"
 #include "sleep.h"
 
 unsigned long acpi_realmode_flags;
@@ -24,6 +25,10 @@ unsigned long acpi_realmode_flags;
 static char temp_stack[4096];
 #endif
 
+asmlinkage void acpi_enter_s3(void)
+{
+	acpi_enter_sleep_state(3, wake_sleep_flags);
+}
 /**
  * acpi_suspend_lowlevel - save kernel state
  *
@@ -32,13 +37,9 @@ static char temp_stack[4096];
  */
 int acpi_suspend_lowlevel(void)
 {
-	struct wakeup_header *header;
-	/* address in low memory of the wakeup routine. */
-	char *acpi_realmode;
-
-	acpi_realmode = TRAMPOLINE_SYM(acpi_wakeup_code);
+	struct wakeup_header *header =
+		(struct wakeup_header *) __va(real_mode_header->wakeup_header);
 
-	header = (struct wakeup_header *)(acpi_realmode + WAKEUP_HEADER_OFFSET);
 	if (header->signature != WAKEUP_HEADER_SIGNATURE) {
 		printk(KERN_ERR "wakeup header does not match\n");
 		return -EINVAL;
@@ -46,27 +47,6 @@ int acpi_suspend_lowlevel(void)
 
 	header->video_mode = saved_video_mode;
 
-	header->wakeup_jmp_seg = acpi_wakeup_address >> 4;
-
-	/*
-	 * Set up the wakeup GDT.  We set these up as Big Real Mode,
-	 * that is, with limits set to 4 GB.  At least the Lenovo
-	 * Thinkpad X61 is known to need this for the video BIOS
-	 * initialization quirk to work; this is likely to also
-	 * be the case for other laptops or integrated video devices.
-	 */
-
-	/* GDT[0]: GDT self-pointer */
-	header->wakeup_gdt[0] =
-		(u64)(sizeof(header->wakeup_gdt) - 1) +
-		((u64)__pa(&header->wakeup_gdt) << 16);
-	/* GDT[1]: big real mode-like code segment */
-	header->wakeup_gdt[1] =
-		GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff);
-	/* GDT[2]: big real mode-like data segment */
-	header->wakeup_gdt[2] =
-		GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff);
-
 #ifndef CONFIG_64BIT
 	store_gdt((struct desc_ptr *)&header->pmode_gdt);
 
@@ -91,7 +71,6 @@ int acpi_suspend_lowlevel(void)
 	header->pmode_cr3 = (u32)__pa(&initial_page_table);
 	saved_magic = 0x12345678;
 #else /* CONFIG_64BIT */
-	header->trampoline_segment = trampoline_address() >> 4;
 #ifdef CONFIG_SMP
 	stack_start = (unsigned long)temp_stack + sizeof(temp_stack);
 	early_gdt_descr.address =
diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
index 416d4be..5653a57 100644
--- a/arch/x86/kernel/acpi/sleep.h
+++ b/arch/x86/kernel/acpi/sleep.h
@@ -2,13 +2,17 @@
  *	Variables and functions used by the code in sleep.c
  */
 
-#include <asm/trampoline.h>
+#include <linux/linkage.h>
+#include <asm/realmode.h>
 
 extern unsigned long saved_video_mode;
 extern long saved_magic;
 
 extern int wakeup_pmode_return;
 
+extern u8 wake_sleep_flags;
+extern asmlinkage void acpi_enter_s3(void);
+
 extern unsigned long acpi_copy_wakeup_routine(unsigned long);
 extern void wakeup_long64(void);
 
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index 13ab720..7261083 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -74,9 +74,7 @@ restore_registers:
 ENTRY(do_suspend_lowlevel)
 	call	save_processor_state
 	call	save_registers
-	pushl	$3
-	call	acpi_enter_sleep_state
-	addl	$4, %esp
+	call	acpi_enter_s3
 
 #	In case of S3 failure, we'll emerge here.  Jump
 # 	to ret_point to recover
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index 8ea5164..014d1d2 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -71,9 +71,7 @@ ENTRY(do_suspend_lowlevel)
 	movq	%rsi, saved_rsi
 
 	addq	$8, %rsp
-	movl	$3, %edi
-	xorl	%eax, %eax
-	call	acpi_enter_sleep_state
+	call	acpi_enter_s3
 	/* in case something went wrong, restore the machine status and go on */
 	jmp	resume_point
 
diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S
deleted file mode 100644
index 63b8ab5..0000000
--- a/arch/x86/kernel/acpi/wakeup_rm.S
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * Wrapper script for the realmode binary as a transport object
- * before copying to low memory.
- */
-#include <asm/page_types.h>
-
-	.section ".x86_trampoline","a"
-	.balign PAGE_SIZE
-	.globl	acpi_wakeup_code
-acpi_wakeup_code:
-	.incbin	"arch/x86/kernel/acpi/realmode/wakeup.bin"
-	.size	acpi_wakeup_code, .-acpi_wakeup_code
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 6e76c19..d5fd66f 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -20,7 +20,6 @@
 #include <linux/bitops.h>
 #include <linux/ioport.h>
 #include <linux/suspend.h>
-#include <linux/kmemleak.h>
 #include <asm/e820.h>
 #include <asm/io.h>
 #include <asm/iommu.h>
@@ -95,11 +94,6 @@ static u32 __init allocate_aperture(void)
 		return 0;
 	}
 	memblock_reserve(addr, aper_size);
-	/*
-	 * Kmemleak should not scan this block as it may not be mapped via the
-	 * kernel direct mapping.
-	 */
-	kmemleak_ignore(phys_to_virt(addr));
 	printk(KERN_INFO "Mapping aperture over %d KB of RAM @ %lx\n",
 			aper_size >> 10, addr);
 	insert_aperture_resource((u32)addr, aper_size);
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 11544d8..39a222e 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -35,6 +35,7 @@
 #include <linux/smp.h>
 #include <linux/mm.h>
 
+#include <asm/irq_remapping.h>
 #include <asm/perf_event.h>
 #include <asm/x86_init.h>
 #include <asm/pgalloc.h>
@@ -1325,11 +1326,13 @@ void __cpuinit setup_local_APIC(void)
 			       acked);
 			break;
 		}
-		if (cpu_has_tsc) {
-			rdtscll(ntsc);
-			max_loops = (cpu_khz << 10) - (ntsc - tsc);
-		} else
-			max_loops--;
+		if (queued) {
+			if (cpu_has_tsc) {
+				rdtscll(ntsc);
+				max_loops = (cpu_khz << 10) - (ntsc - tsc);
+			} else
+				max_loops--;
+		}
 	} while (queued && max_loops > 0);
 	WARN_ON(max_loops <= 0);
 
@@ -1441,8 +1444,8 @@ void __init bsp_end_local_APIC_setup(void)
 	 * Now that local APIC setup is completed for BP, configure the fault
 	 * handling for interrupt remapping.
 	 */
-	if (intr_remapping_enabled)
-		enable_drhd_fault_handling();
+	if (irq_remapping_enabled)
+		irq_remap_enable_fault_handling();
 
 }
 
@@ -1517,7 +1520,7 @@ void enable_x2apic(void)
 int __init enable_IR(void)
 {
 #ifdef CONFIG_IRQ_REMAP
-	if (!intr_remapping_supported()) {
+	if (!irq_remapping_supported()) {
 		pr_debug("intr-remapping not supported\n");
 		return -1;
 	}
@@ -1528,7 +1531,7 @@ int __init enable_IR(void)
 		return -1;
 	}
 
-	return enable_intr_remapping();
+	return irq_remapping_enable();
 #endif
 	return -1;
 }
@@ -1537,10 +1540,13 @@ void __init enable_IR_x2apic(void)
 {
 	unsigned long flags;
 	int ret, x2apic_enabled = 0;
-	int dmar_table_init_ret;
+	int hardware_init_ret;
+
+	/* Make sure irq_remap_ops are initialized */
+	setup_irq_remapping_ops();
 
-	dmar_table_init_ret = dmar_table_init();
-	if (dmar_table_init_ret && !x2apic_supported())
+	hardware_init_ret = irq_remapping_prepare();
+	if (hardware_init_ret && !x2apic_supported())
 		return;
 
 	ret = save_ioapic_entries();
@@ -1556,7 +1562,7 @@ void __init enable_IR_x2apic(void)
 	if (x2apic_preenabled && nox2apic)
 		disable_x2apic();
 
-	if (dmar_table_init_ret)
+	if (hardware_init_ret)
 		ret = -1;
 	else
 		ret = enable_IR();
@@ -1637,9 +1643,11 @@ static int __init apic_verify(void)
 	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
 
 	/* The BIOS may have set up the APIC at some other address */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (l & MSR_IA32_APICBASE_ENABLE)
-		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+	if (boot_cpu_data.x86 >= 6) {
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (l & MSR_IA32_APICBASE_ENABLE)
+			mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+	}
 
 	pr_info("Found and enabled local APIC!\n");
 	return 0;
@@ -1657,13 +1665,15 @@ int __init apic_force_enable(unsigned long addr)
 	 * MSR. This can only be done in software for Intel P6 or later
 	 * and AMD K7 (Model > 1) or later.
 	 */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (!(l & MSR_IA32_APICBASE_ENABLE)) {
-		pr_info("Local APIC disabled by BIOS -- reenabling.\n");
-		l &= ~MSR_IA32_APICBASE_BASE;
-		l |= MSR_IA32_APICBASE_ENABLE | addr;
-		wrmsr(MSR_IA32_APICBASE, l, h);
-		enabled_via_apicbase = 1;
+	if (boot_cpu_data.x86 >= 6) {
+		rdmsr(MSR_IA32_APICBASE, l, h);
+		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+			pr_info("Local APIC disabled by BIOS -- reenabling.\n");
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | addr;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+			enabled_via_apicbase = 1;
+		}
 	}
 	return apic_verify();
 }
@@ -2172,8 +2182,8 @@ static int lapic_suspend(void)
 	local_irq_save(flags);
 	disable_local_APIC();
 
-	if (intr_remapping_enabled)
-		disable_intr_remapping();
+	if (irq_remapping_enabled)
+		irq_remapping_disable();
 
 	local_irq_restore(flags);
 	return 0;
@@ -2189,7 +2199,7 @@ static void lapic_resume(void)
 		return;
 
 	local_irq_save(flags);
-	if (intr_remapping_enabled) {
+	if (irq_remapping_enabled) {
 		/*
 		 * IO-APIC and PIC have their own resume routines.
 		 * We just mask them here to make sure the interrupt
@@ -2209,10 +2219,12 @@ static void lapic_resume(void)
 		 * FIXME! This will be wrong if we ever support suspend on
 		 * SMP! We'll need to do this as part of the CPU restore!
 		 */
-		rdmsr(MSR_IA32_APICBASE, l, h);
-		l &= ~MSR_IA32_APICBASE_BASE;
-		l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
-		wrmsr(MSR_IA32_APICBASE, l, h);
+		if (boot_cpu_data.x86 >= 6) {
+			rdmsr(MSR_IA32_APICBASE, l, h);
+			l &= ~MSR_IA32_APICBASE_BASE;
+			l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+			wrmsr(MSR_IA32_APICBASE, l, h);
+		}
 	}
 
 	maxlvt = lapic_get_maxlvt();
@@ -2239,8 +2251,8 @@ static void lapic_resume(void)
 	apic_write(APIC_ESR, 0);
 	apic_read(APIC_ESR);
 
-	if (intr_remapping_enabled)
-		reenable_intr_remapping(x2apic_mode);
+	if (irq_remapping_enabled)
+		irq_remapping_reenable(x2apic_mode);
 
 	local_irq_restore(flags);
 }
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 359b689..0e881c4 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -227,6 +227,7 @@ static struct apic apic_flat =  {
 
 	.read				= native_apic_mem_read,
 	.write				= native_apic_mem_write,
+	.eoi_write			= native_apic_mem_write,
 	.icr_read			= native_apic_icr_read,
 	.icr_write			= native_apic_icr_write,
 	.wait_icr_idle			= native_apic_wait_icr_idle,
@@ -386,6 +387,7 @@ static struct apic apic_physflat =  {
 
 	.read				= native_apic_mem_read,
 	.write				= native_apic_mem_write,
+	.eoi_write			= native_apic_mem_write,
 	.icr_read			= native_apic_icr_read,
 	.icr_write			= native_apic_icr_write,
 	.wait_icr_idle			= native_apic_wait_icr_idle,
diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c
index 634ae6c..a6e4c6e 100644
--- a/arch/x86/kernel/apic/apic_noop.c
+++ b/arch/x86/kernel/apic/apic_noop.c
@@ -181,6 +181,7 @@ struct apic apic_noop = {
 
 	.read				= noop_apic_read,
 	.write				= noop_apic_write,
+	.eoi_write			= noop_apic_write,
 	.icr_read			= noop_apic_icr_read,
 	.icr_write			= noop_apic_icr_write,
 	.wait_icr_idle			= noop_apic_wait_icr_idle,
diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c
index 899803e..6ec6d5d 100644
--- a/arch/x86/kernel/apic/apic_numachip.c
+++ b/arch/x86/kernel/apic/apic_numachip.c
@@ -207,8 +207,11 @@ static void __init map_csrs(void)
 
 static void fixup_cpu_id(struct cpuinfo_x86 *c, int node)
 {
-	c->phys_proc_id = node;
-	per_cpu(cpu_llc_id, smp_processor_id()) = node;
+
+	if (c->phys_proc_id != node) {
+		c->phys_proc_id = node;
+		per_cpu(cpu_llc_id, smp_processor_id()) = node;
+	}
 }
 
 static int __init numachip_system_init(void)
@@ -292,6 +295,7 @@ static struct apic apic_numachip __refconst = {
 
 	.read				= native_apic_mem_read,
 	.write				= native_apic_mem_write,
+	.eoi_write			= native_apic_mem_write,
 	.icr_read			= native_apic_icr_read,
 	.icr_write			= native_apic_icr_write,
 	.wait_icr_idle			= native_apic_wait_icr_idle,
diff --git a/arch/x86/kernel/apic/bigsmp_32.c b/arch/x86/kernel/apic/bigsmp_32.c
index 0cdec70..31fbdbf 100644
--- a/arch/x86/kernel/apic/bigsmp_32.c
+++ b/arch/x86/kernel/apic/bigsmp_32.c
@@ -248,6 +248,7 @@ static struct apic apic_bigsmp = {
 
 	.read				= native_apic_mem_read,
 	.write				= native_apic_mem_write,
+	.eoi_write			= native_apic_mem_write,
 	.icr_read			= native_apic_icr_read,
 	.icr_write			= native_apic_icr_write,
 	.wait_icr_idle			= native_apic_wait_icr_idle,
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index e42d1d3b9..db4ab1b 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -678,6 +678,7 @@ static struct apic __refdata apic_es7000_cluster = {
 
 	.read				= native_apic_mem_read,
 	.write				= native_apic_mem_write,
+	.eoi_write			= native_apic_mem_write,
 	.icr_read			= native_apic_icr_read,
 	.icr_write			= native_apic_icr_write,
 	.wait_icr_idle			= native_apic_wait_icr_idle,
@@ -742,6 +743,7 @@ static struct apic __refdata apic_es7000 = {
 
 	.read				= native_apic_mem_read,
 	.write				= native_apic_mem_write,
+	.eoi_write			= native_apic_mem_write,
 	.icr_read			= native_apic_icr_read,
 	.icr_write			= native_apic_icr_write,
 	.wait_icr_idle			= native_apic_wait_icr_idle,
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e88300d..5f0ff59 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -68,23 +68,21 @@
 #define for_each_irq_pin(entry, head) \
 	for (entry = head; entry; entry = entry->next)
 
-static void		__init __ioapic_init_mappings(void);
-
-static unsigned int	__io_apic_read  (unsigned int apic, unsigned int reg);
-static void		__io_apic_write (unsigned int apic, unsigned int reg, unsigned int val);
-static void		__io_apic_modify(unsigned int apic, unsigned int reg, unsigned int val);
-
-static struct io_apic_ops io_apic_ops = {
-	.init	= __ioapic_init_mappings,
-	.read	= __io_apic_read,
-	.write	= __io_apic_write,
-	.modify = __io_apic_modify,
-};
-
-void __init set_io_apic_ops(const struct io_apic_ops *ops)
+#ifdef CONFIG_IRQ_REMAP
+static void irq_remap_modify_chip_defaults(struct irq_chip *chip);
+static inline bool irq_remapped(struct irq_cfg *cfg)
+{
+	return cfg->irq_2_iommu.iommu != NULL;
+}
+#else
+static inline bool irq_remapped(struct irq_cfg *cfg)
+{
+	return false;
+}
+static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip)
 {
-	io_apic_ops = *ops;
 }
+#endif
 
 /*
  *      Is the SiS APIC rmw bug present ?
@@ -142,7 +140,7 @@ int mp_irq_entries;
 /* GSI interrupts */
 static int nr_irqs_gsi = NR_IRQS_LEGACY;
 
-#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+#ifdef CONFIG_EISA
 int mp_bus_id_to_type[MAX_MP_BUSSES];
 #endif
 
@@ -313,21 +311,6 @@ static void free_irq_at(unsigned int at, struct irq_cfg *cfg)
 	irq_free_desc(at);
 }
 
-static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
-{
-	return io_apic_ops.read(apic, reg);
-}
-
-static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	io_apic_ops.write(apic, reg, value);
-}
-
-static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
-{
-	io_apic_ops.modify(apic, reg, value);
-}
-
 
 struct io_apic {
 	unsigned int index;
@@ -349,14 +332,14 @@ static inline void io_apic_eoi(unsigned int apic, unsigned int vector)
 	writel(vector, &io_apic->eoi);
 }
 
-static unsigned int __io_apic_read(unsigned int apic, unsigned int reg)
+unsigned int native_io_apic_read(unsigned int apic, unsigned int reg)
 {
 	struct io_apic __iomem *io_apic = io_apic_base(apic);
 	writel(reg, &io_apic->index);
 	return readl(&io_apic->data);
 }
 
-static void __io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
+void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
 {
 	struct io_apic __iomem *io_apic = io_apic_base(apic);
 
@@ -370,7 +353,7 @@ static void __io_apic_write(unsigned int apic, unsigned int reg, unsigned int va
  *
  * Older SiS APIC requires we rewrite the index register
  */
-static void __io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
+void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value)
 {
 	struct io_apic __iomem *io_apic = io_apic_base(apic);
 
@@ -379,29 +362,6 @@ static void __io_apic_modify(unsigned int apic, unsigned int reg, unsigned int v
 	writel(value, &io_apic->data);
 }
 
-static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
-{
-	struct irq_pin_list *entry;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&ioapic_lock, flags);
-	for_each_irq_pin(entry, cfg->irq_2_pin) {
-		unsigned int reg;
-		int pin;
-
-		pin = entry->pin;
-		reg = io_apic_read(entry->apic, 0x10 + pin*2);
-		/* Is the remote IRR bit set? */
-		if (reg & IO_APIC_REDIR_REMOTE_IRR) {
-			raw_spin_unlock_irqrestore(&ioapic_lock, flags);
-			return true;
-		}
-	}
-	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
-
-	return false;
-}
-
 union entry_union {
 	struct { u32 w1, w2; };
 	struct IO_APIC_route_entry entry;
@@ -875,7 +835,7 @@ static int __init find_isa_irq_apic(int irq, int type)
 	return -1;
 }
 
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
 /*
  * EISA Edge/Level control register, ELCR
  */
@@ -912,12 +872,6 @@ static int EISA_ELCR(unsigned int irq)
 #define default_PCI_trigger(idx)	(1)
 #define default_PCI_polarity(idx)	(1)
 
-/* MCA interrupts are always polarity zero level triggered,
- * when listed as conforming in the MP table. */
-
-#define default_MCA_trigger(idx)	(1)
-#define default_MCA_polarity(idx)	default_ISA_polarity(idx)
-
 static int irq_polarity(int idx)
 {
 	int bus = mp_irqs[idx].srcbus;
@@ -975,7 +929,7 @@ static int irq_trigger(int idx)
 				trigger = default_ISA_trigger(idx);
 			else
 				trigger = default_PCI_trigger(idx);
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
 			switch (mp_bus_id_to_type[bus]) {
 				case MP_BUS_ISA: /* ISA pin */
 				{
@@ -992,11 +946,6 @@ static int irq_trigger(int idx)
 					/* set before the switch */
 					break;
 				}
-				case MP_BUS_MCA: /* MCA pin */
-				{
-					trigger = default_MCA_trigger(idx);
-					break;
-				}
 				default:
 				{
 					printk(KERN_WARNING "broken BIOS!!\n");
@@ -1246,7 +1195,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
 	BUG_ON(!cfg->vector);
 
 	vector = cfg->vector;
-	for_each_cpu_and(cpu, cfg->domain, cpu_online_mask)
+	for_each_cpu(cpu, cfg->domain)
 		per_cpu(vector_irq, cpu)[vector] = -1;
 
 	cfg->vector = 0;
@@ -1254,7 +1203,7 @@ static void __clear_irq_vector(int irq, struct irq_cfg *cfg)
 
 	if (likely(!cfg->move_in_progress))
 		return;
-	for_each_cpu_and(cpu, cfg->old_domain, cpu_online_mask) {
+	for_each_cpu(cpu, cfg->old_domain) {
 		for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS;
 								vector++) {
 			if (per_cpu(vector_irq, cpu)[vector] != irq)
@@ -1361,77 +1310,13 @@ static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg,
 				      fasteoi ? "fasteoi" : "edge");
 }
 
-
-static int setup_ir_ioapic_entry(int irq,
-			      struct IR_IO_APIC_route_entry *entry,
-			      unsigned int destination, int vector,
-			      struct io_apic_irq_attr *attr)
-{
-	int index;
-	struct irte irte;
-	int ioapic_id = mpc_ioapic_id(attr->ioapic);
-	struct intel_iommu *iommu = map_ioapic_to_ir(ioapic_id);
-
-	if (!iommu) {
-		pr_warn("No mapping iommu for ioapic %d\n", ioapic_id);
-		return -ENODEV;
-	}
-
-	index = alloc_irte(iommu, irq, 1);
-	if (index < 0) {
-		pr_warn("Failed to allocate IRTE for ioapic %d\n", ioapic_id);
-		return -ENOMEM;
-	}
-
-	prepare_irte(&irte, vector, destination);
-
-	/* Set source-id of interrupt request */
-	set_ioapic_sid(&irte, ioapic_id);
-
-	modify_irte(irq, &irte);
-
-	apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: "
-		"Set IRTE entry (P:%d FPD:%d Dst_Mode:%d "
-		"Redir_hint:%d Trig_Mode:%d Dlvry_Mode:%X "
-		"Avail:%X Vector:%02X Dest:%08X "
-		"SID:%04X SQ:%X SVT:%X)\n",
-		attr->ioapic, irte.present, irte.fpd, irte.dst_mode,
-		irte.redir_hint, irte.trigger_mode, irte.dlvry_mode,
-		irte.avail, irte.vector, irte.dest_id,
-		irte.sid, irte.sq, irte.svt);
-
-	memset(entry, 0, sizeof(*entry));
-
-	entry->index2	= (index >> 15) & 0x1;
-	entry->zero	= 0;
-	entry->format	= 1;
-	entry->index	= (index & 0x7fff);
-	/*
-	 * IO-APIC RTE will be configured with virtual vector.
-	 * irq handler will do the explicit EOI to the io-apic.
-	 */
-	entry->vector	= attr->ioapic_pin;
-	entry->mask	= 0;			/* enable IRQ */
-	entry->trigger	= attr->trigger;
-	entry->polarity	= attr->polarity;
-
-	/* Mask level triggered irqs.
-	 * Use IRQ_DELAYED_DISABLE for edge triggered irqs.
-	 */
-	if (attr->trigger)
-		entry->mask = 1;
-
-	return 0;
-}
-
 static int setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry,
 			       unsigned int destination, int vector,
 			       struct io_apic_irq_attr *attr)
 {
-	if (intr_remapping_enabled)
-		return setup_ir_ioapic_entry(irq,
-			 (struct IR_IO_APIC_route_entry *)entry,
-			 destination, vector, attr);
+	if (irq_remapping_enabled)
+		return setup_ioapic_remapped_entry(irq, entry, destination,
+						   vector, attr);
 
 	memset(entry, 0, sizeof(*entry));
 
@@ -1588,7 +1473,7 @@ static void __init setup_timer_IRQ0_pin(unsigned int ioapic_idx,
 {
 	struct IO_APIC_route_entry entry;
 
-	if (intr_remapping_enabled)
+	if (irq_remapping_enabled)
 		return;
 
 	memset(&entry, 0, sizeof(entry));
@@ -1674,7 +1559,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
 
 	printk(KERN_DEBUG ".... IRQ redirection table:\n");
 
-	if (intr_remapping_enabled) {
+	if (irq_remapping_enabled) {
 		printk(KERN_DEBUG " NR Indx Fmt Mask Trig IRR"
 			" Pol Stat Indx2 Zero Vect:\n");
 	} else {
@@ -1683,7 +1568,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
 	}
 
 	for (i = 0; i <= reg_01.bits.entries; i++) {
-		if (intr_remapping_enabled) {
+		if (irq_remapping_enabled) {
 			struct IO_APIC_route_entry entry;
 			struct IR_IO_APIC_route_entry *ir_entry;
 
@@ -2050,7 +1935,7 @@ void disable_IO_APIC(void)
 	 * IOAPIC RTE as well as interrupt-remapping table entry).
 	 * As this gets called during crash dump, keep this simple for now.
 	 */
-	if (ioapic_i8259.pin != -1 && !intr_remapping_enabled) {
+	if (ioapic_i8259.pin != -1 && !irq_remapping_enabled) {
 		struct IO_APIC_route_entry entry;
 
 		memset(&entry, 0, sizeof(entry));
@@ -2074,7 +1959,7 @@ void disable_IO_APIC(void)
 	 * Use virtual wire A mode when interrupt remapping is enabled.
 	 */
 	if (cpu_has_apic || apic_from_smp_config())
-		disconnect_bsp_APIC(!intr_remapping_enabled &&
+		disconnect_bsp_APIC(!irq_remapping_enabled &&
 				ioapic_i8259.pin != -1);
 }
 
@@ -2390,71 +2275,6 @@ ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	return ret;
 }
 
-#ifdef CONFIG_IRQ_REMAP
-
-/*
- * Migrate the IO-APIC irq in the presence of intr-remapping.
- *
- * For both level and edge triggered, irq migration is a simple atomic
- * update(of vector and cpu destination) of IRTE and flush the hardware cache.
- *
- * For level triggered, we eliminate the io-apic RTE modification (with the
- * updated vector information), by using a virtual vector (io-apic pin number).
- * Real vector that is used for interrupting cpu will be coming from
- * the interrupt-remapping table entry.
- *
- * As the migration is a simple atomic update of IRTE, the same mechanism
- * is used to migrate MSI irq's in the presence of interrupt-remapping.
- */
-static int
-ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
-		       bool force)
-{
-	struct irq_cfg *cfg = data->chip_data;
-	unsigned int dest, irq = data->irq;
-	struct irte irte;
-
-	if (!cpumask_intersects(mask, cpu_online_mask))
-		return -EINVAL;
-
-	if (get_irte(irq, &irte))
-		return -EBUSY;
-
-	if (assign_irq_vector(irq, cfg, mask))
-		return -EBUSY;
-
-	dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
-
-	irte.vector = cfg->vector;
-	irte.dest_id = IRTE_DEST(dest);
-
-	/*
-	 * Atomically updates the IRTE with the new destination, vector
-	 * and flushes the interrupt entry cache.
-	 */
-	modify_irte(irq, &irte);
-
-	/*
-	 * After this point, all the interrupts will start arriving
-	 * at the new destination. So, time to cleanup the previous
-	 * vector allocation.
-	 */
-	if (cfg->move_in_progress)
-		send_cleanup_vector(cfg);
-
-	cpumask_copy(data->affinity, mask);
-	return 0;
-}
-
-#else
-static inline int
-ir_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask,
-		       bool force)
-{
-	return 0;
-}
-#endif
-
 asmlinkage void smp_irq_move_cleanup_interrupt(void)
 {
 	unsigned vector, me;
@@ -2552,6 +2372,29 @@ static void ack_apic_edge(struct irq_data *data)
 atomic_t irq_mis_count;
 
 #ifdef CONFIG_GENERIC_PENDING_IRQ
+static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
+{
+	struct irq_pin_list *entry;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&ioapic_lock, flags);
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
+		unsigned int reg;
+		int pin;
+
+		pin = entry->pin;
+		reg = io_apic_read(entry->apic, 0x10 + pin*2);
+		/* Is the remote IRR bit set? */
+		if (reg & IO_APIC_REDIR_REMOTE_IRR) {
+			raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+			return true;
+		}
+	}
+	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
+
+	return false;
+}
+
 static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg)
 {
 	/* If we are moving the irq we need to mask it */
@@ -2699,7 +2542,7 @@ static void irq_remap_modify_chip_defaults(struct irq_chip *chip)
 	chip->irq_eoi = ir_ack_apic_level;
 
 #ifdef CONFIG_SMP
-	chip->irq_set_affinity = ir_ioapic_set_affinity;
+	chip->irq_set_affinity = set_remapped_irq_affinity;
 #endif
 }
 #endif /* CONFIG_IRQ_REMAP */
@@ -2912,7 +2755,7 @@ static inline void __init check_timer(void)
 	 * 8259A.
 	 */
 	if (pin1 == -1) {
-		if (intr_remapping_enabled)
+		if (irq_remapping_enabled)
 			panic("BIOS bug: timer not connected to IO-APIC");
 		pin1 = pin2;
 		apic1 = apic2;
@@ -2945,7 +2788,7 @@ static inline void __init check_timer(void)
 				clear_IO_APIC_pin(0, pin1);
 			goto out;
 		}
-		if (intr_remapping_enabled)
+		if (irq_remapping_enabled)
 			panic("timer doesn't work through Interrupt-remapped IO-APIC");
 		local_irq_disable();
 		clear_IO_APIC_pin(apic1, pin1);
@@ -3169,7 +3012,7 @@ void destroy_irq(unsigned int irq)
 	irq_set_status_flags(irq, IRQ_NOREQUEST|IRQ_NOPROBE);
 
 	if (irq_remapped(cfg))
-		free_irte(irq);
+		free_remapped_irq(irq);
 	raw_spin_lock_irqsave(&vector_lock, flags);
 	__clear_irq_vector(irq, cfg);
 	raw_spin_unlock_irqrestore(&vector_lock, flags);
@@ -3198,54 +3041,34 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq,
 	dest = apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus());
 
 	if (irq_remapped(cfg)) {
-		struct irte irte;
-		int ir_index;
-		u16 sub_handle;
-
-		ir_index = map_irq_to_irte_handle(irq, &sub_handle);
-		BUG_ON(ir_index == -1);
-
-		prepare_irte(&irte, cfg->vector, dest);
-
-		/* Set source-id of interrupt request */
-		if (pdev)
-			set_msi_sid(&irte, pdev);
-		else
-			set_hpet_sid(&irte, hpet_id);
-
-		modify_irte(irq, &irte);
+		compose_remapped_msi_msg(pdev, irq, dest, msg, hpet_id);
+		return err;
+	}
 
+	if (x2apic_enabled())
+		msg->address_hi = MSI_ADDR_BASE_HI |
+				  MSI_ADDR_EXT_DEST_ID(dest);
+	else
 		msg->address_hi = MSI_ADDR_BASE_HI;
-		msg->data = sub_handle;
-		msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT |
-				  MSI_ADDR_IR_SHV |
-				  MSI_ADDR_IR_INDEX1(ir_index) |
-				  MSI_ADDR_IR_INDEX2(ir_index);
-	} else {
-		if (x2apic_enabled())
-			msg->address_hi = MSI_ADDR_BASE_HI |
-					  MSI_ADDR_EXT_DEST_ID(dest);
-		else
-			msg->address_hi = MSI_ADDR_BASE_HI;
 
-		msg->address_lo =
-			MSI_ADDR_BASE_LO |
-			((apic->irq_dest_mode == 0) ?
-				MSI_ADDR_DEST_MODE_PHYSICAL:
-				MSI_ADDR_DEST_MODE_LOGICAL) |
-			((apic->irq_delivery_mode != dest_LowestPrio) ?
-				MSI_ADDR_REDIRECTION_CPU:
-				MSI_ADDR_REDIRECTION_LOWPRI) |
-			MSI_ADDR_DEST_ID(dest);
+	msg->address_lo =
+		MSI_ADDR_BASE_LO |
+		((apic->irq_dest_mode == 0) ?
+			MSI_ADDR_DEST_MODE_PHYSICAL:
+			MSI_ADDR_DEST_MODE_LOGICAL) |
+		((apic->irq_delivery_mode != dest_LowestPrio) ?
+			MSI_ADDR_REDIRECTION_CPU:
+			MSI_ADDR_REDIRECTION_LOWPRI) |
+		MSI_ADDR_DEST_ID(dest);
+
+	msg->data =
+		MSI_DATA_TRIGGER_EDGE |
+		MSI_DATA_LEVEL_ASSERT |
+		((apic->irq_delivery_mode != dest_LowestPrio) ?
+			MSI_DATA_DELIVERY_FIXED:
+			MSI_DATA_DELIVERY_LOWPRI) |
+		MSI_DATA_VECTOR(cfg->vector);
 
-		msg->data =
-			MSI_DATA_TRIGGER_EDGE |
-			MSI_DATA_LEVEL_ASSERT |
-			((apic->irq_delivery_mode != dest_LowestPrio) ?
-				MSI_DATA_DELIVERY_FIXED:
-				MSI_DATA_DELIVERY_LOWPRI) |
-			MSI_DATA_VECTOR(cfg->vector);
-	}
 	return err;
 }
 
@@ -3288,33 +3111,6 @@ static struct irq_chip msi_chip = {
 	.irq_retrigger		= ioapic_retrigger_irq,
 };
 
-/*
- * Map the PCI dev to the corresponding remapping hardware unit
- * and allocate 'nvec' consecutive interrupt-remapping table entries
- * in it.
- */
-static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec)
-{
-	struct intel_iommu *iommu;
-	int index;
-
-	iommu = map_dev_to_ir(dev);
-	if (!iommu) {
-		printk(KERN_ERR
-		       "Unable to map PCI %s to iommu\n", pci_name(dev));
-		return -ENOENT;
-	}
-
-	index = alloc_irte(iommu, irq, nvec);
-	if (index < 0) {
-		printk(KERN_ERR
-		       "Unable to allocate %d IRTE for PCI %s\n", nvec,
-		       pci_name(dev));
-		return -ENOSPC;
-	}
-	return index;
-}
-
 static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq)
 {
 	struct irq_chip *chip = &msi_chip;
@@ -3345,7 +3141,6 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	int node, ret, sub_handle, index = 0;
 	unsigned int irq, irq_want;
 	struct msi_desc *msidesc;
-	struct intel_iommu *iommu = NULL;
 
 	/* x86 doesn't support multiple MSI yet */
 	if (type == PCI_CAP_ID_MSI && nvec > 1)
@@ -3359,7 +3154,7 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		if (irq == 0)
 			return -1;
 		irq_want = irq + 1;
-		if (!intr_remapping_enabled)
+		if (!irq_remapping_enabled)
 			goto no_ir;
 
 		if (!sub_handle) {
@@ -3367,23 +3162,16 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 			 * allocate the consecutive block of IRTE's
 			 * for 'nvec'
 			 */
-			index = msi_alloc_irte(dev, irq, nvec);
+			index = msi_alloc_remapped_irq(dev, irq, nvec);
 			if (index < 0) {
 				ret = index;
 				goto error;
 			}
 		} else {
-			iommu = map_dev_to_ir(dev);
-			if (!iommu) {
-				ret = -ENOENT;
+			ret = msi_setup_remapped_irq(dev, irq, index,
+						     sub_handle);
+			if (ret < 0)
 				goto error;
-			}
-			/*
-			 * setup the mapping between the irq and the IRTE
-			 * base index, the sub_handle pointing to the
-			 * appropriate interrupt remap table entry.
-			 */
-			set_irte_irq(irq, iommu, index, sub_handle);
 		}
 no_ir:
 		ret = setup_msi_irq(dev, msidesc, irq);
@@ -3501,15 +3289,8 @@ int arch_setup_hpet_msi(unsigned int irq, unsigned int id)
 	struct msi_msg msg;
 	int ret;
 
-	if (intr_remapping_enabled) {
-		struct intel_iommu *iommu = map_hpet_to_ir(id);
-		int index;
-
-		if (!iommu)
-			return -1;
-
-		index = alloc_irte(iommu, irq, 1);
-		if (index < 0)
+	if (irq_remapping_enabled) {
+		if (!setup_hpet_msi_remapped(irq, id))
 			return -1;
 	}
 
@@ -3888,8 +3669,8 @@ void __init setup_ioapic_dest(void)
 		else
 			mask = apic->target_cpus();
 
-		if (intr_remapping_enabled)
-			ir_ioapic_set_affinity(idata, mask, false);
+		if (irq_remapping_enabled)
+			set_remapped_irq_affinity(idata, mask, false);
 		else
 			ioapic_set_affinity(idata, mask, false);
 	}
@@ -3931,12 +3712,7 @@ static struct resource * __init ioapic_setup_resources(int nr_ioapics)
 	return res;
 }
 
-void __init ioapic_and_gsi_init(void)
-{
-	io_apic_ops.init();
-}
-
-static void __init __ioapic_init_mappings(void)
+void __init native_io_apic_init_mappings(void)
 {
 	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
 	struct resource *ioapic_res;
diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c
index 00d2422..f00a68c 100644
--- a/arch/x86/kernel/apic/numaq_32.c
+++ b/arch/x86/kernel/apic/numaq_32.c
@@ -530,6 +530,7 @@ static struct apic __refdata apic_numaq = {
 
 	.read				= native_apic_mem_read,
 	.write				= native_apic_mem_write,
+	.eoi_write			= native_apic_mem_write,
 	.icr_read			= native_apic_icr_read,
 	.icr_write			= native_apic_icr_write,
 	.wait_icr_idle			= native_apic_wait_icr_idle,
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c
index ff2c1b9..1b291da 100644
--- a/arch/x86/kernel/apic/probe_32.c
+++ b/arch/x86/kernel/apic/probe_32.c
@@ -142,6 +142,7 @@ static struct apic apic_default = {
 
 	.read				= native_apic_mem_read,
 	.write				= native_apic_mem_write,
+	.eoi_write			= native_apic_mem_write,
 	.icr_read			= native_apic_icr_read,
 	.icr_write			= native_apic_icr_write,
 	.wait_icr_idle			= native_apic_wait_icr_idle,
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index fea000b..659897c 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -546,6 +546,7 @@ static struct apic apic_summit = {
 
 	.read				= native_apic_mem_read,
 	.write				= native_apic_mem_write,
+	.eoi_write			= native_apic_mem_write,
 	.icr_read			= native_apic_icr_read,
 	.icr_write			= native_apic_icr_write,
 	.wait_icr_idle			= native_apic_wait_icr_idle,
diff --git a/arch/x86/kernel/apic/x2apic_cluster.c b/arch/x86/kernel/apic/x2apic_cluster.c
index 48f3103..ff35cff 100644
--- a/arch/x86/kernel/apic/x2apic_cluster.c
+++ b/arch/x86/kernel/apic/x2apic_cluster.c
@@ -260,6 +260,7 @@ static struct apic apic_x2apic_cluster = {
 
 	.read				= native_apic_msr_read,
 	.write				= native_apic_msr_write,
+	.eoi_write			= native_apic_msr_eoi_write,
 	.icr_read			= native_x2apic_icr_read,
 	.icr_write			= native_x2apic_icr_write,
 	.wait_icr_idle			= native_x2apic_wait_icr_idle,
diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c
index 8a778db..c17e982 100644
--- a/arch/x86/kernel/apic/x2apic_phys.c
+++ b/arch/x86/kernel/apic/x2apic_phys.c
@@ -24,6 +24,12 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	if (x2apic_phys)
 		return x2apic_enabled();
+	else if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
+		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) &&
+		x2apic_enabled()) {
+		printk(KERN_DEBUG "System requires x2apic physical mode\n");
+		return 1;
+	}
 	else
 		return 0;
 }
@@ -166,6 +172,7 @@ static struct apic apic_x2apic_phys = {
 
 	.read				= native_apic_msr_read,
 	.write				= native_apic_msr_write,
+	.eoi_write			= native_apic_msr_eoi_write,
 	.icr_read			= native_x2apic_icr_read,
 	.icr_write			= native_x2apic_icr_write,
 	.wait_icr_idle			= native_x2apic_wait_icr_idle,
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 87bfa69..c6d03f7 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -404,6 +404,7 @@ static struct apic __refdata apic_x2apic_uv_x = {
 
 	.read				= native_apic_msr_read,
 	.write				= native_apic_msr_write,
+	.eoi_write			= native_apic_msr_eoi_write,
 	.icr_read			= native_x2apic_icr_read,
 	.icr_write			= native_x2apic_icr_write,
 	.wait_icr_idle			= native_x2apic_wait_icr_idle,
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 459e78c..07b0c0d 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -2401,7 +2401,7 @@ static void __exit apm_exit(void)
 		 * (pm_idle), Wait for all processors to update cached/local
 		 * copies of pm_idle before proceeding.
 		 */
-		cpu_idle_wait();
+		kick_all_cpus_sync();
 	}
 	if (((apm_info.bios.flags & APM_BIOS_DISENGAGED) == 0)
 	    && (apm_info.connection_version > 0x0100)) {
diff --git a/arch/x86/kernel/check.c b/arch/x86/kernel/check.c
index 5da1269..e2dbcb7 100644
--- a/arch/x86/kernel/check.c
+++ b/arch/x86/kernel/check.c
@@ -27,21 +27,29 @@ static int num_scan_areas;
 
 static __init int set_corruption_check(char *arg)
 {
-	char *end;
+	ssize_t ret;
+	unsigned long val;
 
-	memory_corruption_check = simple_strtol(arg, &end, 10);
+	ret = kstrtoul(arg, 10, &val);
+	if (ret)
+		return ret;
 
-	return (*end == 0) ? 0 : -EINVAL;
+	memory_corruption_check = val;
+	return 0;
 }
 early_param("memory_corruption_check", set_corruption_check);
 
 static __init int set_corruption_check_period(char *arg)
 {
-	char *end;
+	ssize_t ret;
+	unsigned long val;
 
-	corruption_check_period = simple_strtoul(arg, &end, 10);
+	ret = kstrtoul(arg, 10, &val);
+	if (ret)
+		return ret;
 
-	return (*end == 0) ? 0 : -EINVAL;
+	corruption_check_period = val;
+	return 0;
 }
 early_param("memory_corruption_check_period", set_corruption_check_period);
 
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 0a44b90..146bb62 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -26,7 +26,8 @@
  *	contact AMD for precise details and a CPU swap.
  *
  *	See	http://www.multimania.com/poulot/k6bug.html
- *		http://www.amd.com/K6/k6docs/revgd.html
+ *	and	section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6"
+ *		(Publication # 21266  Issue Date: August 1998)
  *
  *	The following test is erm.. interesting. AMD neglected to up
  *	the chip setting when fixing the bug but they also tweaked some
@@ -94,7 +95,6 @@ static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
 				"system stability may be impaired when more than 32 MB are used.\n");
 		else
 			printk(KERN_CONT "probably OK (after B9730xxxx).\n");
-		printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
 	}
 
 	/* K6 with old style WHCR */
@@ -353,10 +353,11 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 		node = per_cpu(cpu_llc_id, cpu);
 
 	/*
-	 * If core numbers are inconsistent, it's likely a multi-fabric platform,
-	 * so invoke platform-specific handler
+	 * On multi-fabric platform (e.g. Numascale NumaChip) a
+	 * platform-specific handler needs to be called to fixup some
+	 * IDs of the CPU.
 	 */
-	if (c->phys_proc_id != node)
+	if (x86_cpuinit.fixup_cpu_id)
 		x86_cpuinit.fixup_cpu_id(c, node);
 
 	if (!node_online(node)) {
@@ -579,6 +580,24 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		}
 	}
 
+	/* re-enable TopologyExtensions if switched off by BIOS */
+	if ((c->x86 == 0x15) &&
+	    (c->x86_model >= 0x10) && (c->x86_model <= 0x1f) &&
+	    !cpu_has(c, X86_FEATURE_TOPOEXT)) {
+		u64 val;
+
+		if (!rdmsrl_amd_safe(0xc0011005, &val)) {
+			val |= 1ULL << 54;
+			wrmsrl_amd_safe(0xc0011005, val);
+			rdmsrl(0xc0011005, val);
+			if (val & (1ULL << 54)) {
+				set_cpu_cap(c, X86_FEATURE_TOPOEXT);
+				printk(KERN_INFO FW_INFO "CPU: Re-enabling "
+				  "disabled Topology Extensions Support\n");
+			}
+		}
+	}
+
 	cpu_detect_cache_sizes(c);
 
 	/* Multi core CPU? */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 67e2583..6b9333b 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1101,14 +1101,20 @@ int is_debug_stack(unsigned long addr)
 		 addr > (__get_cpu_var(debug_stack_addr) - DEBUG_STKSZ));
 }
 
+static DEFINE_PER_CPU(u32, debug_stack_use_ctr);
+
 void debug_stack_set_zero(void)
 {
+	this_cpu_inc(debug_stack_use_ctr);
 	load_idt((const struct desc_ptr *)&nmi_idt_descr);
 }
 
 void debug_stack_reset(void)
 {
-	load_idt((const struct desc_ptr *)&idt_descr);
+	if (WARN_ON(!this_cpu_read(debug_stack_use_ctr)))
+		return;
+	if (this_cpu_dec_return(debug_stack_use_ctr) == 0)
+		load_idt((const struct desc_ptr *)&idt_descr);
 }
 
 #else	/* CONFIG_X86_64 */
@@ -1163,15 +1169,6 @@ static void dbg_restore_debug_regs(void)
 #endif /* ! CONFIG_KGDB */
 
 /*
- * Prints an error where the NUMA and configured core-number mismatch and the
- * platform didn't override this to fix it up
- */
-void __cpuinit x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node)
-{
-	pr_err("NUMA core number %d differs from configured core number %d\n", node, c->phys_proc_id);
-}
-
-/*
  * cpu_init() initializes state that is per-CPU. Some data is already
  * initialized (naturally) in the bootstrap process, such as the GDT
  * and IDT. We reload them nevertheless, this function acts as a
@@ -1194,7 +1191,7 @@ void __cpuinit cpu_init(void)
 	oist = &per_cpu(orig_ist, cpu);
 
 #ifdef CONFIG_NUMA
-	if (cpu != 0 && percpu_read(numa_node) == 0 &&
+	if (cpu != 0 && this_cpu_read(numa_node) == 0 &&
 	    early_cpu_to_node(cpu) != NUMA_NO_NODE)
 		set_numa_node(early_cpu_to_node(cpu));
 #endif
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 73d08ed..9a7c90d 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -433,14 +433,14 @@ int amd_set_l3_disable_slot(struct amd_northbridge *nb, int cpu, unsigned slot,
 	/*  check if @slot is already used or the index is already disabled */
 	ret = amd_get_l3_disable_slot(nb, slot);
 	if (ret >= 0)
-		return -EINVAL;
+		return -EEXIST;
 
 	if (index > nb->l3_cache.indices)
 		return -EINVAL;
 
 	/* check whether the other slot has disabled the same index already */
 	if (index == amd_get_l3_disable_slot(nb, !slot))
-		return -EINVAL;
+		return -EEXIST;
 
 	amd_l3_disable_index(nb, cpu, slot, index);
 
@@ -468,8 +468,8 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
 	err = amd_set_l3_disable_slot(this_leaf->base.nb, cpu, slot, val);
 	if (err) {
 		if (err == -EEXIST)
-			printk(KERN_WARNING "L3 disable slot %d in use!\n",
-					    slot);
+			pr_warning("L3 slot %d in use/index already disabled!\n",
+				   slot);
 		return err;
 	}
 	return count;
@@ -615,14 +615,14 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 					new_l2 = this_leaf.size/1024;
 					num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing;
 					index_msb = get_count_order(num_threads_sharing);
-					l2_id = c->apicid >> index_msb;
+					l2_id = c->apicid & ~((1 << index_msb) - 1);
 					break;
 				case 3:
 					new_l3 = this_leaf.size/1024;
 					num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing;
 					index_msb = get_count_order(
 							num_threads_sharing);
-					l3_id = c->apicid >> index_msb;
+					l3_id = c->apicid & ~((1 << index_msb) - 1);
 					break;
 				default:
 					break;
diff --git a/arch/x86/kernel/cpu/match.c b/arch/x86/kernel/cpu/match.c
index 5502b28..3656537 100644
--- a/arch/x86/kernel/cpu/match.c
+++ b/arch/x86/kernel/cpu/match.c
@@ -23,7 +23,7 @@
  * %X86_MODEL_ANY, %X86_FEATURE_ANY or 0 (except for vendor)
  *
  * Arrays used to match for this should also be declared using
- * MODULE_DEVICE_TABLE(x86_cpu, ...)
+ * MODULE_DEVICE_TABLE(x86cpu, ...)
  *
  * This always matches against the boot cpu, assuming models and features are
  * consistent over all CPUs.
diff --git a/arch/x86/kernel/cpu/mcheck/mce-apei.c b/arch/x86/kernel/cpu/mcheck/mce-apei.c
index 507ea58..cd8b166 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-apei.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-apei.c
@@ -42,7 +42,8 @@ void apei_mce_report_mem_error(int corrected, struct cper_sec_mem_err *mem_err)
 	struct mce m;
 
 	/* Only corrected MC is reported */
-	if (!corrected)
+	if (!corrected || !(mem_err->validation_bits &
+				CPER_MEM_VALID_PHYSICAL_ADDRESS))
 		return;
 
 	mce_setup(&m);
diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
index 0c82091..413c2ce 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -126,6 +126,16 @@ static struct severity {
 		SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA),
 		USER
 		),
+	MCESEV(
+		KEEP, "HT thread notices Action required: instruction fetch error",
+		SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_INSTR),
+		MCGMASK(MCG_STATUS_EIPV, 0)
+		),
+	MCESEV(
+		AR, "Action required: instruction fetch error",
+		SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_INSTR),
+		USER
+		),
 #endif
 	MCESEV(
 		PANIC, "Action required: unknown MCACOD",
@@ -165,15 +175,19 @@ static struct severity {
 };
 
 /*
- * If the EIPV bit is set, it means the saved IP is the
- * instruction which caused the MCE.
+ * If mcgstatus indicated that ip/cs on the stack were
+ * no good, then "m->cs" will be zero and we will have
+ * to assume the worst case (IN_KERNEL) as we actually
+ * have no idea what we were executing when the machine
+ * check hit.
+ * If we do have a good "m->cs" (or a faked one in the
+ * case we were executing in VM86 mode) we can use it to
+ * distinguish an exception taken in user from from one
+ * taken in the kernel.
  */
 static int error_context(struct mce *m)
 {
-	if (m->mcgstatus & MCG_STATUS_EIPV)
-		return (m->ip && (m->cs & 3) == 3) ? IN_USER : IN_KERNEL;
-	/* Unknown, assume kernel */
-	return IN_KERNEL;
+	return ((m->cs & 3) == 3) ? IN_USER : IN_KERNEL;
 }
 
 int mce_severity(struct mce *m, int tolerant, char **msg)
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index d086a09..da27c5d 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -437,6 +437,14 @@ static inline void mce_gather_info(struct mce *m, struct pt_regs *regs)
 		if (m->mcgstatus & (MCG_STATUS_RIPV|MCG_STATUS_EIPV)) {
 			m->ip = regs->ip;
 			m->cs = regs->cs;
+
+			/*
+			 * When in VM86 mode make the cs look like ring 3
+			 * always. This is a lie, but it's better than passing
+			 * the additional vm86 bit around everywhere.
+			 */
+			if (v8086_mode(regs))
+				m->cs |= 3;
 		}
 		/* Use accurate RIP reporting if available. */
 		if (rip_msr)
@@ -583,7 +591,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 	struct mce m;
 	int i;
 
-	percpu_inc(mce_poll_count);
+	this_cpu_inc(mce_poll_count);
 
 	mce_gather_info(&m, NULL);
 
@@ -641,16 +649,18 @@ EXPORT_SYMBOL_GPL(machine_check_poll);
  * Do a quick check if any of the events requires a panic.
  * This decides if we keep the events around or clear them.
  */
-static int mce_no_way_out(struct mce *m, char **msg)
+static int mce_no_way_out(struct mce *m, char **msg, unsigned long *validp)
 {
-	int i;
+	int i, ret = 0;
 
 	for (i = 0; i < banks; i++) {
 		m->status = mce_rdmsrl(MSR_IA32_MCx_STATUS(i));
+		if (m->status & MCI_STATUS_VAL)
+			__set_bit(i, validp);
 		if (mce_severity(m, tolerant, msg) >= MCE_PANIC_SEVERITY)
-			return 1;
+			ret = 1;
 	}
-	return 0;
+	return ret;
 }
 
 /*
@@ -945,9 +955,10 @@ struct mce_info {
 	atomic_t		inuse;
 	struct task_struct	*t;
 	__u64			paddr;
+	int			restartable;
 } mce_info[MCE_INFO_MAX];
 
-static void mce_save_info(__u64 addr)
+static void mce_save_info(__u64 addr, int c)
 {
 	struct mce_info *mi;
 
@@ -955,6 +966,7 @@ static void mce_save_info(__u64 addr)
 		if (atomic_cmpxchg(&mi->inuse, 0, 1) == 0) {
 			mi->t = current;
 			mi->paddr = addr;
+			mi->restartable = c;
 			return;
 		}
 	}
@@ -1011,11 +1023,12 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	 */
 	int kill_it = 0;
 	DECLARE_BITMAP(toclear, MAX_NR_BANKS);
+	DECLARE_BITMAP(valid_banks, MAX_NR_BANKS);
 	char *msg = "Unknown";
 
 	atomic_inc(&mce_entry);
 
-	percpu_inc(mce_exception_count);
+	this_cpu_inc(mce_exception_count);
 
 	if (!banks)
 		goto out;
@@ -1025,7 +1038,8 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	final = &__get_cpu_var(mces_seen);
 	*final = m;
 
-	no_way_out = mce_no_way_out(&m, &msg);
+	memset(valid_banks, 0, sizeof(valid_banks));
+	no_way_out = mce_no_way_out(&m, &msg, valid_banks);
 
 	barrier();
 
@@ -1045,6 +1059,8 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 	order = mce_start(&no_way_out);
 	for (i = 0; i < banks; i++) {
 		__clear_bit(i, toclear);
+		if (!test_bit(i, valid_banks))
+			continue;
 		if (!mce_banks[i].ctl)
 			continue;
 
@@ -1130,7 +1146,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
 			mce_panic("Fatal machine check on current CPU", &m, msg);
 		if (worst == MCE_AR_SEVERITY) {
 			/* schedule action before return to userland */
-			mce_save_info(m.addr);
+			mce_save_info(m.addr, m.mcgstatus & MCG_STATUS_RIPV);
 			set_thread_flag(TIF_MCE_NOTIFY);
 		} else if (kill_it) {
 			force_sig(SIGBUS, current);
@@ -1179,7 +1195,13 @@ void mce_notify_process(void)
 
 	pr_err("Uncorrected hardware memory error in user-access at %llx",
 		 mi->paddr);
-	if (memory_failure(pfn, MCE_VECTOR, MF_ACTION_REQUIRED) < 0) {
+	/*
+	 * We must call memory_failure() here even if the current process is
+	 * doomed. We still need to mark the page as poisoned and alert any
+	 * other users of the page.
+	 */
+	if (memory_failure(pfn, MCE_VECTOR, MF_ACTION_REQUIRED) < 0 ||
+			   mi->restartable == 0) {
 		pr_err("Memory error not recovered");
 		force_sig(SIGBUS, current);
 	}
@@ -1229,15 +1251,15 @@ void mce_log_therm_throt_event(__u64 status)
  * poller finds an MCE, poll 2x faster.  When the poller finds no more
  * errors, poll 2x slower (up to check_interval seconds).
  */
-static int check_interval = 5 * 60; /* 5 minutes */
+static unsigned long check_interval = 5 * 60; /* 5 minutes */
 
-static DEFINE_PER_CPU(int, mce_next_interval); /* in jiffies */
+static DEFINE_PER_CPU(unsigned long, mce_next_interval); /* in jiffies */
 static DEFINE_PER_CPU(struct timer_list, mce_timer);
 
-static void mce_start_timer(unsigned long data)
+static void mce_timer_fn(unsigned long data)
 {
-	struct timer_list *t = &per_cpu(mce_timer, data);
-	int *n;
+	struct timer_list *t = &__get_cpu_var(mce_timer);
+	unsigned long iv;
 
 	WARN_ON(smp_processor_id() != data);
 
@@ -1250,13 +1272,14 @@ static void mce_start_timer(unsigned long data)
 	 * Alert userspace if needed.  If we logged an MCE, reduce the
 	 * polling interval, otherwise increase the polling interval.
 	 */
-	n = &__get_cpu_var(mce_next_interval);
+	iv = __this_cpu_read(mce_next_interval);
 	if (mce_notify_irq())
-		*n = max(*n/2, HZ/100);
+		iv = max(iv / 2, (unsigned long) HZ/100);
 	else
-		*n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
+		iv = min(iv * 2, round_jiffies_relative(check_interval * HZ));
+	__this_cpu_write(mce_next_interval, iv);
 
-	t->expires = jiffies + *n;
+	t->expires = jiffies + iv;
 	add_timer_on(t, smp_processor_id());
 }
 
@@ -1423,6 +1446,43 @@ static int __cpuinit __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 		 */
 		 if (c->x86 == 6 && banks > 0)
 			mce_banks[0].ctl = 0;
+
+		 /*
+		  * Turn off MC4_MISC thresholding banks on those models since
+		  * they're not supported there.
+		  */
+		 if (c->x86 == 0x15 &&
+		     (c->x86_model >= 0x10 && c->x86_model <= 0x1f)) {
+			 int i;
+			 u64 val, hwcr;
+			 bool need_toggle;
+			 u32 msrs[] = {
+				0x00000413, /* MC4_MISC0 */
+				0xc0000408, /* MC4_MISC1 */
+			 };
+
+			 rdmsrl(MSR_K7_HWCR, hwcr);
+
+			 /* McStatusWrEn has to be set */
+			 need_toggle = !(hwcr & BIT(18));
+
+			 if (need_toggle)
+				 wrmsrl(MSR_K7_HWCR, hwcr | BIT(18));
+
+			 for (i = 0; i < ARRAY_SIZE(msrs); i++) {
+				 rdmsrl(msrs[i], val);
+
+				 /* CntP bit set? */
+				 if (val & BIT_64(62)) {
+					val &= ~BIT_64(62);
+					wrmsrl(msrs[i], val);
+				 }
+			 }
+
+			 /* restore old settings */
+			 if (need_toggle)
+				 wrmsrl(MSR_K7_HWCR, hwcr);
+		 }
 	}
 
 	if (c->x86_vendor == X86_VENDOR_INTEL) {
@@ -1497,17 +1557,17 @@ static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
 static void __mcheck_cpu_init_timer(void)
 {
 	struct timer_list *t = &__get_cpu_var(mce_timer);
-	int *n = &__get_cpu_var(mce_next_interval);
+	unsigned long iv = check_interval * HZ;
 
-	setup_timer(t, mce_start_timer, smp_processor_id());
+	setup_timer(t, mce_timer_fn, smp_processor_id());
 
 	if (mce_ignore_ce)
 		return;
 
-	*n = check_interval * HZ;
-	if (!*n)
+	__this_cpu_write(mce_next_interval, iv);
+	if (!iv)
 		return;
-	t->expires = round_jiffies(jiffies + *n);
+	t->expires = round_jiffies(jiffies + iv);
 	add_timer_on(t, smp_processor_id());
 }
 
@@ -2217,7 +2277,7 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	case CPU_DOWN_FAILED_FROZEN:
 		if (!mce_ignore_ce && check_interval) {
 			t->expires = round_jiffies(jiffies +
-					   __get_cpu_var(mce_next_interval));
+					per_cpu(mce_next_interval, cpu));
 			add_timer_on(t, cpu);
 		}
 		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 99b5717..f4873a6 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -51,6 +51,7 @@ struct threshold_block {
 	unsigned int		cpu;
 	u32			address;
 	u16			interrupt_enable;
+	bool			interrupt_capable;
 	u16			threshold_limit;
 	struct kobject		kobj;
 	struct list_head	miscj;
@@ -83,6 +84,21 @@ struct thresh_restart {
 	u16			old_limit;
 };
 
+static bool lvt_interrupt_supported(unsigned int bank, u32 msr_high_bits)
+{
+	/*
+	 * bank 4 supports APIC LVT interrupts implicitly since forever.
+	 */
+	if (bank == 4)
+		return true;
+
+	/*
+	 * IntP: interrupt present; if this bit is set, the thresholding
+	 * bank can generate APIC LVT interrupts
+	 */
+	return msr_high_bits & BIT(28);
+}
+
 static int lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi)
 {
 	int msr = (hi & MASK_LVTOFF_HI) >> 20;
@@ -104,8 +120,10 @@ static int lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi)
 	return 1;
 };
 
-/* must be called with correct cpu affinity */
-/* Called via smp_call_function_single() */
+/*
+ * Called via smp_call_function_single(), must be called with correct
+ * cpu affinity.
+ */
 static void threshold_restart_bank(void *_tr)
 {
 	struct thresh_restart *tr = _tr;
@@ -128,6 +146,12 @@ static void threshold_restart_bank(void *_tr)
 		    (new_count & THRESHOLD_MAX);
 	}
 
+	/* clear IntType */
+	hi &= ~MASK_INT_TYPE_HI;
+
+	if (!tr->b->interrupt_capable)
+		goto done;
+
 	if (tr->set_lvt_off) {
 		if (lvt_off_valid(tr->b, tr->lvt_off, lo, hi)) {
 			/* set new lvt offset */
@@ -136,9 +160,10 @@ static void threshold_restart_bank(void *_tr)
 		}
 	}
 
-	tr->b->interrupt_enable ?
-	    (hi = (hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) :
-	    (hi &= ~MASK_INT_TYPE_HI);
+	if (tr->b->interrupt_enable)
+		hi |= INT_TYPE_APIC;
+
+ done:
 
 	hi |= MASK_COUNT_EN_HI;
 	wrmsr(tr->b->address, lo, hi);
@@ -202,14 +227,17 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 			if (shared_bank[bank] && c->cpu_core_id)
 				break;
 
-			offset = setup_APIC_mce(offset,
-						(high & MASK_LVTOFF_HI) >> 20);
-
 			memset(&b, 0, sizeof(b));
-			b.cpu		= cpu;
-			b.bank		= bank;
-			b.block		= block;
-			b.address	= address;
+			b.cpu			= cpu;
+			b.bank			= bank;
+			b.block			= block;
+			b.address		= address;
+			b.interrupt_capable	= lvt_interrupt_supported(bank, high);
+
+			if (b.interrupt_capable) {
+				int new = (high & MASK_LVTOFF_HI) >> 20;
+				offset  = setup_APIC_mce(offset, new);
+			}
 
 			mce_threshold_block_init(&b, offset);
 			mce_threshold_vector = amd_threshold_interrupt;
@@ -309,6 +337,9 @@ store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size)
 	struct thresh_restart tr;
 	unsigned long new;
 
+	if (!b->interrupt_capable)
+		return -EINVAL;
+
 	if (strict_strtoul(buf, 0, &new) < 0)
 		return -EINVAL;
 
@@ -390,10 +421,10 @@ RW_ATTR(threshold_limit);
 RW_ATTR(error_count);
 
 static struct attribute *default_attrs[] = {
-	&interrupt_enable.attr,
 	&threshold_limit.attr,
 	&error_count.attr,
-	NULL
+	NULL,	/* possibly interrupt_enable if supported, see below */
+	NULL,
 };
 
 #define to_block(k)	container_of(k, struct threshold_block, kobj)
@@ -467,8 +498,14 @@ static __cpuinit int allocate_threshold_blocks(unsigned int cpu,
 	b->cpu			= cpu;
 	b->address		= address;
 	b->interrupt_enable	= 0;
+	b->interrupt_capable	= lvt_interrupt_supported(bank, high);
 	b->threshold_limit	= THRESHOLD_MAX;
 
+	if (b->interrupt_capable)
+		threshold_ktype.default_attrs[2] = &interrupt_enable.attr;
+	else
+		threshold_ktype.default_attrs[2] = NULL;
+
 	INIT_LIST_HEAD(&b->miscj);
 
 	if (per_cpu(threshold_banks, cpu)[bank]->blocks) {
diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index ac140c7..bdda2e6 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -266,7 +266,7 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk,
 		if (align > max_align)
 			align = max_align;
 
-		sizek = 1 << align;
+		sizek = 1UL << align;
 		if (debug_print) {
 			char start_factor = 'K', size_factor = 'K';
 			unsigned long start_base, size_base;
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index bb8e034..c4706cf 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -484,9 +484,6 @@ static int __x86_pmu_event_init(struct perf_event *event)
 
 	/* mark unused */
 	event->hw.extra_reg.idx = EXTRA_REG_NONE;
-
-	/* mark not used */
-	event->hw.extra_reg.idx = EXTRA_REG_NONE;
 	event->hw.branch_reg.idx = EXTRA_REG_NONE;
 
 	return x86_pmu.hw_config(event);
@@ -1186,8 +1183,6 @@ int x86_pmu_handle_irq(struct pt_regs *regs)
 	int idx, handled = 0;
 	u64 val;
 
-	perf_sample_data_init(&data, 0);
-
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
 	/*
@@ -1222,7 +1217,7 @@ int x86_pmu_handle_irq(struct pt_regs *regs)
 		 * event overflow
 		 */
 		handled++;
-		data.period	= event->hw.last_period;
+		perf_sample_data_init(&data, 0, event->hw.last_period);
 
 		if (!x86_perf_event_set_period(event))
 			continue;
@@ -1501,6 +1496,7 @@ static struct cpu_hw_events *allocate_fake_cpuc(void)
 		if (!cpuc->shared_regs)
 			goto error;
 	}
+	cpuc->is_fake = 1;
 	return cpuc;
 error:
 	free_fake_cpuc(cpuc);
@@ -1761,6 +1757,12 @@ perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs)
 	dump_trace(NULL, regs, NULL, 0, &backtrace_ops, entry);
 }
 
+static inline int
+valid_user_frame(const void __user *fp, unsigned long size)
+{
+	return (__range_not_ok(fp, size, TASK_SIZE) == 0);
+}
+
 #ifdef CONFIG_COMPAT
 
 #include <asm/compat.h>
@@ -1785,7 +1787,7 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
 		if (bytes != sizeof(frame))
 			break;
 
-		if (fp < compat_ptr(regs->sp))
+		if (!valid_user_frame(fp, sizeof(frame)))
 			break;
 
 		perf_callchain_store(entry, frame.return_address);
@@ -1831,7 +1833,7 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 		if (bytes != sizeof(frame))
 			break;
 
-		if ((unsigned long)fp < regs->sp)
+		if (!valid_user_frame(fp, sizeof(frame)))
 			break;
 
 		perf_callchain_store(entry, frame.return_address);
diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h
index 6638aaf..7241e2f 100644
--- a/arch/x86/kernel/cpu/perf_event.h
+++ b/arch/x86/kernel/cpu/perf_event.h
@@ -117,6 +117,7 @@ struct cpu_hw_events {
 	struct perf_event	*event_list[X86_PMC_IDX_MAX]; /* in enabled order */
 
 	unsigned int		group_flag;
+	int			is_fake;
 
 	/*
 	 * Intel DebugStore bits
@@ -364,6 +365,7 @@ struct x86_pmu {
 	int		pebs_record_size;
 	void		(*drain_pebs)(struct pt_regs *regs);
 	struct event_constraint *pebs_constraints;
+	void		(*pebs_aliases)(struct perf_event *event);
 
 	/*
 	 * Intel LBR
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 95e7fe1..11a4eb9 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -134,8 +134,13 @@ static u64 amd_pmu_event_map(int hw_event)
 
 static int amd_pmu_hw_config(struct perf_event *event)
 {
-	int ret = x86_pmu_hw_config(event);
+	int ret;
 
+	/* pass precise event sampling to ibs: */
+	if (event->attr.precise_ip && get_ibs_caps())
+		return -ENOENT;
+
+	ret = x86_pmu_hw_config(event);
 	if (ret)
 		return ret;
 
@@ -205,10 +210,8 @@ static void amd_put_event_constraints(struct cpu_hw_events *cpuc,
 	 * when we come here
 	 */
 	for (i = 0; i < x86_pmu.num_counters; i++) {
-		if (nb->owners[i] == event) {
-			cmpxchg(nb->owners+i, event, NULL);
+		if (cmpxchg(nb->owners + i, event, NULL) == event)
 			break;
-		}
 	}
 }
 
@@ -493,6 +496,7 @@ static __initconst const struct x86_pmu amd_pmu = {
  * 0x023	DE	PERF_CTL[2:0]
  * 0x02D	LS	PERF_CTL[3]
  * 0x02E	LS	PERF_CTL[3,0]
+ * 0x031	LS	PERF_CTL[2:0] (**)
  * 0x043	CU	PERF_CTL[2:0]
  * 0x045	CU	PERF_CTL[2:0]
  * 0x046	CU	PERF_CTL[2:0]
@@ -506,10 +510,12 @@ static __initconst const struct x86_pmu amd_pmu = {
  * 0x0DD	LS	PERF_CTL[5:0]
  * 0x0DE	LS	PERF_CTL[5:0]
  * 0x0DF	LS	PERF_CTL[5:0]
+ * 0x1C0	EX	PERF_CTL[5:3]
  * 0x1D6	EX	PERF_CTL[5:0]
  * 0x1D8	EX	PERF_CTL[5:0]
  *
- * (*) depending on the umask all FPU counters may be used
+ * (*)  depending on the umask all FPU counters may be used
+ * (**) only one unitmask enabled at a time
  */
 
 static struct event_constraint amd_f15_PMC0  = EVENT_CONSTRAINT(0, 0x01, 0);
@@ -559,6 +565,12 @@ amd_get_event_constraints_f15h(struct cpu_hw_events *cpuc, struct perf_event *ev
 			return &amd_f15_PMC3;
 		case 0x02E:
 			return &amd_f15_PMC30;
+		case 0x031:
+			if (hweight_long(hwc->config & ARCH_PERFMON_EVENTSEL_UMASK) <= 1)
+				return &amd_f15_PMC20;
+			return &emptyconstraint;
+		case 0x1C0:
+			return &amd_f15_PMC53;
 		default:
 			return &amd_f15_PMC50;
 		}
diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
index 3b8a2d3..da9bcdc 100644
--- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c
+++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c
@@ -9,6 +9,7 @@
 #include <linux/perf_event.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/ptrace.h>
 
 #include <asm/apic.h>
 
@@ -16,36 +17,591 @@ static u32 ibs_caps;
 
 #if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
 
-static struct pmu perf_ibs;
+#include <linux/kprobes.h>
+#include <linux/hardirq.h>
+
+#include <asm/nmi.h>
+
+#define IBS_FETCH_CONFIG_MASK	(IBS_FETCH_RAND_EN | IBS_FETCH_MAX_CNT)
+#define IBS_OP_CONFIG_MASK	IBS_OP_MAX_CNT
+
+enum ibs_states {
+	IBS_ENABLED	= 0,
+	IBS_STARTED	= 1,
+	IBS_STOPPING	= 2,
+
+	IBS_MAX_STATES,
+};
+
+struct cpu_perf_ibs {
+	struct perf_event	*event;
+	unsigned long		state[BITS_TO_LONGS(IBS_MAX_STATES)];
+};
+
+struct perf_ibs {
+	struct pmu	pmu;
+	unsigned int	msr;
+	u64		config_mask;
+	u64		cnt_mask;
+	u64		enable_mask;
+	u64		valid_mask;
+	u64		max_period;
+	unsigned long	offset_mask[1];
+	int		offset_max;
+	struct cpu_perf_ibs __percpu *pcpu;
+	u64		(*get_count)(u64 config);
+};
+
+struct perf_ibs_data {
+	u32		size;
+	union {
+		u32	data[0];	/* data buffer starts here */
+		u32	caps;
+	};
+	u64		regs[MSR_AMD64_IBS_REG_COUNT_MAX];
+};
+
+static int
+perf_event_set_period(struct hw_perf_event *hwc, u64 min, u64 max, u64 *hw_period)
+{
+	s64 left = local64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	int overflow = 0;
+
+	/*
+	 * If we are way outside a reasonable range then just skip forward:
+	 */
+	if (unlikely(left <= -period)) {
+		left = period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		overflow = 1;
+	}
+
+	if (unlikely(left < (s64)min)) {
+		left += period;
+		local64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		overflow = 1;
+	}
+
+	/*
+	 * If the hw period that triggers the sw overflow is too short
+	 * we might hit the irq handler. This biases the results.
+	 * Thus we shorten the next-to-last period and set the last
+	 * period to the max period.
+	 */
+	if (left > max) {
+		left -= max;
+		if (left > max)
+			left = max;
+		else if (left < min)
+			left = min;
+	}
+
+	*hw_period = (u64)left;
+
+	return overflow;
+}
+
+static  int
+perf_event_try_update(struct perf_event *event, u64 new_raw_count, int width)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	int shift = 64 - width;
+	u64 prev_raw_count;
+	u64 delta;
+
+	/*
+	 * Careful: an NMI might modify the previous event value.
+	 *
+	 * Our tactic to handle this is to first atomically read and
+	 * exchange a new raw count - then add that new-prev delta
+	 * count to the generic event atomically:
+	 */
+	prev_raw_count = local64_read(&hwc->prev_count);
+	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+					new_raw_count) != prev_raw_count)
+		return 0;
+
+	/*
+	 * Now we have the new raw value and have updated the prev
+	 * timestamp already. We can now calculate the elapsed delta
+	 * (event-)time and add that to the generic event.
+	 *
+	 * Careful, not all hw sign-extends above the physical width
+	 * of the count.
+	 */
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	local64_add(delta, &event->count);
+	local64_sub(delta, &hwc->period_left);
+
+	return 1;
+}
+
+static struct perf_ibs perf_ibs_fetch;
+static struct perf_ibs perf_ibs_op;
+
+static struct perf_ibs *get_ibs_pmu(int type)
+{
+	if (perf_ibs_fetch.pmu.type == type)
+		return &perf_ibs_fetch;
+	if (perf_ibs_op.pmu.type == type)
+		return &perf_ibs_op;
+	return NULL;
+}
+
+/*
+ * Use IBS for precise event sampling:
+ *
+ *  perf record -a -e cpu-cycles:p ...    # use ibs op counting cycle count
+ *  perf record -a -e r076:p ...          # same as -e cpu-cycles:p
+ *  perf record -a -e r0C1:p ...          # use ibs op counting micro-ops
+ *
+ * IbsOpCntCtl (bit 19) of IBS Execution Control Register (IbsOpCtl,
+ * MSRC001_1033) is used to select either cycle or micro-ops counting
+ * mode.
+ *
+ * The rip of IBS samples has skid 0. Thus, IBS supports precise
+ * levels 1 and 2 and the PERF_EFLAGS_EXACT is set. In rare cases the
+ * rip is invalid when IBS was not able to record the rip correctly.
+ * We clear PERF_EFLAGS_EXACT and take the rip from pt_regs then.
+ *
+ */
+static int perf_ibs_precise_event(struct perf_event *event, u64 *config)
+{
+	switch (event->attr.precise_ip) {
+	case 0:
+		return -ENOENT;
+	case 1:
+	case 2:
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	switch (event->attr.type) {
+	case PERF_TYPE_HARDWARE:
+		switch (event->attr.config) {
+		case PERF_COUNT_HW_CPU_CYCLES:
+			*config = 0;
+			return 0;
+		}
+		break;
+	case PERF_TYPE_RAW:
+		switch (event->attr.config) {
+		case 0x0076:
+			*config = 0;
+			return 0;
+		case 0x00C1:
+			*config = IBS_OP_CNT_CTL;
+			return 0;
+		}
+		break;
+	default:
+		return -ENOENT;
+	}
+
+	return -EOPNOTSUPP;
+}
 
 static int perf_ibs_init(struct perf_event *event)
 {
-	if (perf_ibs.type != event->attr.type)
+	struct hw_perf_event *hwc = &event->hw;
+	struct perf_ibs *perf_ibs;
+	u64 max_cnt, config;
+	int ret;
+
+	perf_ibs = get_ibs_pmu(event->attr.type);
+	if (perf_ibs) {
+		config = event->attr.config;
+	} else {
+		perf_ibs = &perf_ibs_op;
+		ret = perf_ibs_precise_event(event, &config);
+		if (ret)
+			return ret;
+	}
+
+	if (event->pmu != &perf_ibs->pmu)
 		return -ENOENT;
+
+	if (config & ~perf_ibs->config_mask)
+		return -EINVAL;
+
+	if (hwc->sample_period) {
+		if (config & perf_ibs->cnt_mask)
+			/* raw max_cnt may not be set */
+			return -EINVAL;
+		if (!event->attr.sample_freq && hwc->sample_period & 0x0f)
+			/*
+			 * lower 4 bits can not be set in ibs max cnt,
+			 * but allowing it in case we adjust the
+			 * sample period to set a frequency.
+			 */
+			return -EINVAL;
+		hwc->sample_period &= ~0x0FULL;
+		if (!hwc->sample_period)
+			hwc->sample_period = 0x10;
+	} else {
+		max_cnt = config & perf_ibs->cnt_mask;
+		config &= ~perf_ibs->cnt_mask;
+		event->attr.sample_period = max_cnt << 4;
+		hwc->sample_period = event->attr.sample_period;
+	}
+
+	if (!hwc->sample_period)
+		return -EINVAL;
+
+	/*
+	 * If we modify hwc->sample_period, we also need to update
+	 * hwc->last_period and hwc->period_left.
+	 */
+	hwc->last_period = hwc->sample_period;
+	local64_set(&hwc->period_left, hwc->sample_period);
+
+	hwc->config_base = perf_ibs->msr;
+	hwc->config = config;
+
 	return 0;
 }
 
+static int perf_ibs_set_period(struct perf_ibs *perf_ibs,
+			       struct hw_perf_event *hwc, u64 *period)
+{
+	int overflow;
+
+	/* ignore lower 4 bits in min count: */
+	overflow = perf_event_set_period(hwc, 1<<4, perf_ibs->max_period, period);
+	local64_set(&hwc->prev_count, 0);
+
+	return overflow;
+}
+
+static u64 get_ibs_fetch_count(u64 config)
+{
+	return (config & IBS_FETCH_CNT) >> 12;
+}
+
+static u64 get_ibs_op_count(u64 config)
+{
+	u64 count = 0;
+
+	if (config & IBS_OP_VAL)
+		count += (config & IBS_OP_MAX_CNT) << 4; /* cnt rolled over */
+
+	if (ibs_caps & IBS_CAPS_RDWROPCNT)
+		count += (config & IBS_OP_CUR_CNT) >> 32;
+
+	return count;
+}
+
+static void
+perf_ibs_event_update(struct perf_ibs *perf_ibs, struct perf_event *event,
+		      u64 *config)
+{
+	u64 count = perf_ibs->get_count(*config);
+
+	/*
+	 * Set width to 64 since we do not overflow on max width but
+	 * instead on max count. In perf_ibs_set_period() we clear
+	 * prev count manually on overflow.
+	 */
+	while (!perf_event_try_update(event, count, 64)) {
+		rdmsrl(event->hw.config_base, *config);
+		count = perf_ibs->get_count(*config);
+	}
+}
+
+static inline void perf_ibs_enable_event(struct perf_ibs *perf_ibs,
+					 struct hw_perf_event *hwc, u64 config)
+{
+	wrmsrl(hwc->config_base, hwc->config | config | perf_ibs->enable_mask);
+}
+
+/*
+ * Erratum #420 Instruction-Based Sampling Engine May Generate
+ * Interrupt that Cannot Be Cleared:
+ *
+ * Must clear counter mask first, then clear the enable bit. See
+ * Revision Guide for AMD Family 10h Processors, Publication #41322.
+ */
+static inline void perf_ibs_disable_event(struct perf_ibs *perf_ibs,
+					  struct hw_perf_event *hwc, u64 config)
+{
+	config &= ~perf_ibs->cnt_mask;
+	wrmsrl(hwc->config_base, config);
+	config &= ~perf_ibs->enable_mask;
+	wrmsrl(hwc->config_base, config);
+}
+
+/*
+ * We cannot restore the ibs pmu state, so we always needs to update
+ * the event while stopping it and then reset the state when starting
+ * again. Thus, ignoring PERF_EF_RELOAD and PERF_EF_UPDATE flags in
+ * perf_ibs_start()/perf_ibs_stop() and instead always do it.
+ */
+static void perf_ibs_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct perf_ibs *perf_ibs = container_of(event->pmu, struct perf_ibs, pmu);
+	struct cpu_perf_ibs *pcpu = this_cpu_ptr(perf_ibs->pcpu);
+	u64 period;
+
+	if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED)))
+		return;
+
+	WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+	hwc->state = 0;
+
+	perf_ibs_set_period(perf_ibs, hwc, &period);
+	set_bit(IBS_STARTED, pcpu->state);
+	perf_ibs_enable_event(perf_ibs, hwc, period >> 4);
+
+	perf_event_update_userpage(event);
+}
+
+static void perf_ibs_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hwc = &event->hw;
+	struct perf_ibs *perf_ibs = container_of(event->pmu, struct perf_ibs, pmu);
+	struct cpu_perf_ibs *pcpu = this_cpu_ptr(perf_ibs->pcpu);
+	u64 config;
+	int stopping;
+
+	stopping = test_and_clear_bit(IBS_STARTED, pcpu->state);
+
+	if (!stopping && (hwc->state & PERF_HES_UPTODATE))
+		return;
+
+	rdmsrl(hwc->config_base, config);
+
+	if (stopping) {
+		set_bit(IBS_STOPPING, pcpu->state);
+		perf_ibs_disable_event(perf_ibs, hwc, config);
+		WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
+		hwc->state |= PERF_HES_STOPPED;
+	}
+
+	if (hwc->state & PERF_HES_UPTODATE)
+		return;
+
+	/*
+	 * Clear valid bit to not count rollovers on update, rollovers
+	 * are only updated in the irq handler.
+	 */
+	config &= ~perf_ibs->valid_mask;
+
+	perf_ibs_event_update(perf_ibs, event, &config);
+	hwc->state |= PERF_HES_UPTODATE;
+}
+
 static int perf_ibs_add(struct perf_event *event, int flags)
 {
+	struct perf_ibs *perf_ibs = container_of(event->pmu, struct perf_ibs, pmu);
+	struct cpu_perf_ibs *pcpu = this_cpu_ptr(perf_ibs->pcpu);
+
+	if (test_and_set_bit(IBS_ENABLED, pcpu->state))
+		return -ENOSPC;
+
+	event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+
+	pcpu->event = event;
+
+	if (flags & PERF_EF_START)
+		perf_ibs_start(event, PERF_EF_RELOAD);
+
 	return 0;
 }
 
 static void perf_ibs_del(struct perf_event *event, int flags)
 {
+	struct perf_ibs *perf_ibs = container_of(event->pmu, struct perf_ibs, pmu);
+	struct cpu_perf_ibs *pcpu = this_cpu_ptr(perf_ibs->pcpu);
+
+	if (!test_and_clear_bit(IBS_ENABLED, pcpu->state))
+		return;
+
+	perf_ibs_stop(event, PERF_EF_UPDATE);
+
+	pcpu->event = NULL;
+
+	perf_event_update_userpage(event);
 }
 
-static struct pmu perf_ibs = {
-	.event_init= perf_ibs_init,
-	.add= perf_ibs_add,
-	.del= perf_ibs_del,
+static void perf_ibs_read(struct perf_event *event) { }
+
+static struct perf_ibs perf_ibs_fetch = {
+	.pmu = {
+		.task_ctx_nr	= perf_invalid_context,
+
+		.event_init	= perf_ibs_init,
+		.add		= perf_ibs_add,
+		.del		= perf_ibs_del,
+		.start		= perf_ibs_start,
+		.stop		= perf_ibs_stop,
+		.read		= perf_ibs_read,
+	},
+	.msr			= MSR_AMD64_IBSFETCHCTL,
+	.config_mask		= IBS_FETCH_CONFIG_MASK,
+	.cnt_mask		= IBS_FETCH_MAX_CNT,
+	.enable_mask		= IBS_FETCH_ENABLE,
+	.valid_mask		= IBS_FETCH_VAL,
+	.max_period		= IBS_FETCH_MAX_CNT << 4,
+	.offset_mask		= { MSR_AMD64_IBSFETCH_REG_MASK },
+	.offset_max		= MSR_AMD64_IBSFETCH_REG_COUNT,
+
+	.get_count		= get_ibs_fetch_count,
 };
 
+static struct perf_ibs perf_ibs_op = {
+	.pmu = {
+		.task_ctx_nr	= perf_invalid_context,
+
+		.event_init	= perf_ibs_init,
+		.add		= perf_ibs_add,
+		.del		= perf_ibs_del,
+		.start		= perf_ibs_start,
+		.stop		= perf_ibs_stop,
+		.read		= perf_ibs_read,
+	},
+	.msr			= MSR_AMD64_IBSOPCTL,
+	.config_mask		= IBS_OP_CONFIG_MASK,
+	.cnt_mask		= IBS_OP_MAX_CNT,
+	.enable_mask		= IBS_OP_ENABLE,
+	.valid_mask		= IBS_OP_VAL,
+	.max_period		= IBS_OP_MAX_CNT << 4,
+	.offset_mask		= { MSR_AMD64_IBSOP_REG_MASK },
+	.offset_max		= MSR_AMD64_IBSOP_REG_COUNT,
+
+	.get_count		= get_ibs_op_count,
+};
+
+static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs)
+{
+	struct cpu_perf_ibs *pcpu = this_cpu_ptr(perf_ibs->pcpu);
+	struct perf_event *event = pcpu->event;
+	struct hw_perf_event *hwc = &event->hw;
+	struct perf_sample_data data;
+	struct perf_raw_record raw;
+	struct pt_regs regs;
+	struct perf_ibs_data ibs_data;
+	int offset, size, check_rip, offset_max, throttle = 0;
+	unsigned int msr;
+	u64 *buf, *config, period;
+
+	if (!test_bit(IBS_STARTED, pcpu->state)) {
+		/*
+		 * Catch spurious interrupts after stopping IBS: After
+		 * disabling IBS there could be still incomming NMIs
+		 * with samples that even have the valid bit cleared.
+		 * Mark all this NMIs as handled.
+		 */
+		return test_and_clear_bit(IBS_STOPPING, pcpu->state) ? 1 : 0;
+	}
+
+	msr = hwc->config_base;
+	buf = ibs_data.regs;
+	rdmsrl(msr, *buf);
+	if (!(*buf++ & perf_ibs->valid_mask))
+		return 0;
+
+	config = &ibs_data.regs[0];
+	perf_ibs_event_update(perf_ibs, event, config);
+	perf_sample_data_init(&data, 0, hwc->last_period);
+	if (!perf_ibs_set_period(perf_ibs, hwc, &period))
+		goto out;	/* no sw counter overflow */
+
+	ibs_data.caps = ibs_caps;
+	size = 1;
+	offset = 1;
+	check_rip = (perf_ibs == &perf_ibs_op && (ibs_caps & IBS_CAPS_RIPINVALIDCHK));
+	if (event->attr.sample_type & PERF_SAMPLE_RAW)
+		offset_max = perf_ibs->offset_max;
+	else if (check_rip)
+		offset_max = 2;
+	else
+		offset_max = 1;
+	do {
+		rdmsrl(msr + offset, *buf++);
+		size++;
+		offset = find_next_bit(perf_ibs->offset_mask,
+				       perf_ibs->offset_max,
+				       offset + 1);
+	} while (offset < offset_max);
+	ibs_data.size = sizeof(u64) * size;
+
+	regs = *iregs;
+	if (check_rip && (ibs_data.regs[2] & IBS_RIP_INVALID)) {
+		regs.flags &= ~PERF_EFLAGS_EXACT;
+	} else {
+		instruction_pointer_set(&regs, ibs_data.regs[1]);
+		regs.flags |= PERF_EFLAGS_EXACT;
+	}
+
+	if (event->attr.sample_type & PERF_SAMPLE_RAW) {
+		raw.size = sizeof(u32) + ibs_data.size;
+		raw.data = ibs_data.data;
+		data.raw = &raw;
+	}
+
+	throttle = perf_event_overflow(event, &data, &regs);
+out:
+	if (throttle)
+		perf_ibs_disable_event(perf_ibs, hwc, *config);
+	else
+		perf_ibs_enable_event(perf_ibs, hwc, period >> 4);
+
+	perf_event_update_userpage(event);
+
+	return 1;
+}
+
+static int __kprobes
+perf_ibs_nmi_handler(unsigned int cmd, struct pt_regs *regs)
+{
+	int handled = 0;
+
+	handled += perf_ibs_handle_irq(&perf_ibs_fetch, regs);
+	handled += perf_ibs_handle_irq(&perf_ibs_op, regs);
+
+	if (handled)
+		inc_irq_stat(apic_perf_irqs);
+
+	return handled;
+}
+
+static __init int perf_ibs_pmu_init(struct perf_ibs *perf_ibs, char *name)
+{
+	struct cpu_perf_ibs __percpu *pcpu;
+	int ret;
+
+	pcpu = alloc_percpu(struct cpu_perf_ibs);
+	if (!pcpu)
+		return -ENOMEM;
+
+	perf_ibs->pcpu = pcpu;
+
+	ret = perf_pmu_register(&perf_ibs->pmu, name, -1);
+	if (ret) {
+		perf_ibs->pcpu = NULL;
+		free_percpu(pcpu);
+	}
+
+	return ret;
+}
+
 static __init int perf_event_ibs_init(void)
 {
 	if (!ibs_caps)
 		return -ENODEV;	/* ibs not supported by the cpu */
 
-	perf_pmu_register(&perf_ibs, "ibs", -1);
+	perf_ibs_pmu_init(&perf_ibs_fetch, "ibs_fetch");
+	if (ibs_caps & IBS_CAPS_OPCNT)
+		perf_ibs_op.config_mask |= IBS_OP_CNT_CTL;
+	perf_ibs_pmu_init(&perf_ibs_op, "ibs_op");
+	register_nmi_handler(NMI_LOCAL, perf_ibs_nmi_handler, 0, "perf_ibs");
 	printk(KERN_INFO "perf: AMD IBS detected (0x%08x)\n", ibs_caps);
 
 	return 0;
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 26b3e2f..187c294 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -1027,8 +1027,6 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 	u64 status;
 	int handled;
 
-	perf_sample_data_init(&data, 0);
-
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
 	/*
@@ -1082,7 +1080,7 @@ again:
 		if (!intel_pmu_save_and_restart(event))
 			continue;
 
-		data.period = event->hw.last_period;
+		perf_sample_data_init(&data, 0, event->hw.last_period);
 
 		if (has_branch_stack(event))
 			data.br_stack = &cpuc->lbr_stack;
@@ -1121,27 +1119,33 @@ intel_bts_constraints(struct perf_event *event)
 	return NULL;
 }
 
-static bool intel_try_alt_er(struct perf_event *event, int orig_idx)
+static int intel_alt_er(int idx)
 {
 	if (!(x86_pmu.er_flags & ERF_HAS_RSP_1))
-		return false;
+		return idx;
 
-	if (event->hw.extra_reg.idx == EXTRA_REG_RSP_0) {
-		event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
-		event->hw.config |= 0x01bb;
-		event->hw.extra_reg.idx = EXTRA_REG_RSP_1;
-		event->hw.extra_reg.reg = MSR_OFFCORE_RSP_1;
-	} else if (event->hw.extra_reg.idx == EXTRA_REG_RSP_1) {
+	if (idx == EXTRA_REG_RSP_0)
+		return EXTRA_REG_RSP_1;
+
+	if (idx == EXTRA_REG_RSP_1)
+		return EXTRA_REG_RSP_0;
+
+	return idx;
+}
+
+static void intel_fixup_er(struct perf_event *event, int idx)
+{
+	event->hw.extra_reg.idx = idx;
+
+	if (idx == EXTRA_REG_RSP_0) {
 		event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
 		event->hw.config |= 0x01b7;
-		event->hw.extra_reg.idx = EXTRA_REG_RSP_0;
 		event->hw.extra_reg.reg = MSR_OFFCORE_RSP_0;
+	} else if (idx == EXTRA_REG_RSP_1) {
+		event->hw.config &= ~INTEL_ARCH_EVENT_MASK;
+		event->hw.config |= 0x01bb;
+		event->hw.extra_reg.reg = MSR_OFFCORE_RSP_1;
 	}
-
-	if (event->hw.extra_reg.idx == orig_idx)
-		return false;
-
-	return true;
 }
 
 /*
@@ -1159,14 +1163,18 @@ __intel_shared_reg_get_constraints(struct cpu_hw_events *cpuc,
 	struct event_constraint *c = &emptyconstraint;
 	struct er_account *era;
 	unsigned long flags;
-	int orig_idx = reg->idx;
+	int idx = reg->idx;
 
-	/* already allocated shared msr */
-	if (reg->alloc)
+	/*
+	 * reg->alloc can be set due to existing state, so for fake cpuc we
+	 * need to ignore this, otherwise we might fail to allocate proper fake
+	 * state for this extra reg constraint. Also see the comment below.
+	 */
+	if (reg->alloc && !cpuc->is_fake)
 		return NULL; /* call x86_get_event_constraint() */
 
 again:
-	era = &cpuc->shared_regs->regs[reg->idx];
+	era = &cpuc->shared_regs->regs[idx];
 	/*
 	 * we use spin_lock_irqsave() to avoid lockdep issues when
 	 * passing a fake cpuc
@@ -1175,6 +1183,29 @@ again:
 
 	if (!atomic_read(&era->ref) || era->config == reg->config) {
 
+		/*
+		 * If its a fake cpuc -- as per validate_{group,event}() we
+		 * shouldn't touch event state and we can avoid doing so
+		 * since both will only call get_event_constraints() once
+		 * on each event, this avoids the need for reg->alloc.
+		 *
+		 * Not doing the ER fixup will only result in era->reg being
+		 * wrong, but since we won't actually try and program hardware
+		 * this isn't a problem either.
+		 */
+		if (!cpuc->is_fake) {
+			if (idx != reg->idx)
+				intel_fixup_er(event, idx);
+
+			/*
+			 * x86_schedule_events() can call get_event_constraints()
+			 * multiple times on events in the case of incremental
+			 * scheduling(). reg->alloc ensures we only do the ER
+			 * allocation once.
+			 */
+			reg->alloc = 1;
+		}
+
 		/* lock in msr value */
 		era->config = reg->config;
 		era->reg = reg->reg;
@@ -1182,17 +1213,17 @@ again:
 		/* one more user */
 		atomic_inc(&era->ref);
 
-		/* no need to reallocate during incremental event scheduling */
-		reg->alloc = 1;
-
 		/*
 		 * need to call x86_get_event_constraint()
 		 * to check if associated event has constraints
 		 */
 		c = NULL;
-	} else if (intel_try_alt_er(event, orig_idx)) {
-		raw_spin_unlock_irqrestore(&era->lock, flags);
-		goto again;
+	} else {
+		idx = intel_alt_er(idx);
+		if (idx != reg->idx) {
+			raw_spin_unlock_irqrestore(&era->lock, flags);
+			goto again;
+		}
 	}
 	raw_spin_unlock_irqrestore(&era->lock, flags);
 
@@ -1206,11 +1237,14 @@ __intel_shared_reg_put_constraints(struct cpu_hw_events *cpuc,
 	struct er_account *era;
 
 	/*
-	 * only put constraint if extra reg was actually
-	 * allocated. Also takes care of event which do
-	 * not use an extra shared reg
+	 * Only put constraint if extra reg was actually allocated. Also takes
+	 * care of event which do not use an extra shared reg.
+	 *
+	 * Also, if this is a fake cpuc we shouldn't touch any event state
+	 * (reg->alloc) and we don't care about leaving inconsistent cpuc state
+	 * either since it'll be thrown out.
 	 */
-	if (!reg->alloc)
+	if (!reg->alloc || cpuc->is_fake)
 		return;
 
 	era = &cpuc->shared_regs->regs[reg->idx];
@@ -1302,15 +1336,9 @@ static void intel_put_event_constraints(struct cpu_hw_events *cpuc,
 	intel_put_shared_regs_event_constraints(cpuc, event);
 }
 
-static int intel_pmu_hw_config(struct perf_event *event)
+static void intel_pebs_aliases_core2(struct perf_event *event)
 {
-	int ret = x86_pmu_hw_config(event);
-
-	if (ret)
-		return ret;
-
-	if (event->attr.precise_ip &&
-	    (event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
+	if ((event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
 		/*
 		 * Use an alternative encoding for CPU_CLK_UNHALTED.THREAD_P
 		 * (0x003c) so that we can use it with PEBS.
@@ -1331,10 +1359,48 @@ static int intel_pmu_hw_config(struct perf_event *event)
 		 */
 		u64 alt_config = X86_CONFIG(.event=0xc0, .inv=1, .cmask=16);
 
+		alt_config |= (event->hw.config & ~X86_RAW_EVENT_MASK);
+		event->hw.config = alt_config;
+	}
+}
+
+static void intel_pebs_aliases_snb(struct perf_event *event)
+{
+	if ((event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
+		/*
+		 * Use an alternative encoding for CPU_CLK_UNHALTED.THREAD_P
+		 * (0x003c) so that we can use it with PEBS.
+		 *
+		 * The regular CPU_CLK_UNHALTED.THREAD_P event (0x003c) isn't
+		 * PEBS capable. However we can use UOPS_RETIRED.ALL
+		 * (0x01c2), which is a PEBS capable event, to get the same
+		 * count.
+		 *
+		 * UOPS_RETIRED.ALL counts the number of cycles that retires
+		 * CNTMASK micro-ops. By setting CNTMASK to a value (16)
+		 * larger than the maximum number of micro-ops that can be
+		 * retired per cycle (4) and then inverting the condition, we
+		 * count all cycles that retire 16 or less micro-ops, which
+		 * is every cycle.
+		 *
+		 * Thereby we gain a PEBS capable cycle counter.
+		 */
+		u64 alt_config = X86_CONFIG(.event=0xc2, .umask=0x01, .inv=1, .cmask=16);
 
 		alt_config |= (event->hw.config & ~X86_RAW_EVENT_MASK);
 		event->hw.config = alt_config;
 	}
+}
+
+static int intel_pmu_hw_config(struct perf_event *event)
+{
+	int ret = x86_pmu_hw_config(event);
+
+	if (ret)
+		return ret;
+
+	if (event->attr.precise_ip && x86_pmu.pebs_aliases)
+		x86_pmu.pebs_aliases(event);
 
 	if (intel_pmu_needs_lbr_smpl(event)) {
 		ret = intel_pmu_setup_lbr_filter(event);
@@ -1609,6 +1675,7 @@ static __initconst const struct x86_pmu intel_pmu = {
 	.max_period		= (1ULL << 31) - 1,
 	.get_event_constraints	= intel_get_event_constraints,
 	.put_event_constraints	= intel_put_event_constraints,
+	.pebs_aliases		= intel_pebs_aliases_core2,
 
 	.format_attrs		= intel_arch3_formats_attr,
 
@@ -1842,8 +1909,9 @@ __init int intel_pmu_init(void)
 		break;
 
 	case 42: /* SandyBridge */
-		x86_add_quirk(intel_sandybridge_quirk);
 	case 45: /* SandyBridge, "Romely-EP" */
+		x86_add_quirk(intel_sandybridge_quirk);
+	case 58: /* IvyBridge */
 		memcpy(hw_cache_event_ids, snb_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 
@@ -1851,6 +1919,7 @@ __init int intel_pmu_init(void)
 
 		x86_pmu.event_constraints = intel_snb_event_constraints;
 		x86_pmu.pebs_constraints = intel_snb_pebs_event_constraints;
+		x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
 		x86_pmu.extra_regs = intel_snb_extra_regs;
 		/* all extra regs are per-cpu when HT is on */
 		x86_pmu.er_flags |= ERF_HAS_RSP_1;
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 7f64df1..35e2192 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -316,8 +316,7 @@ int intel_pmu_drain_bts_buffer(void)
 
 	ds->bts_index = ds->bts_buffer_base;
 
-	perf_sample_data_init(&data, 0);
-	data.period = event->hw.last_period;
+	perf_sample_data_init(&data, 0, event->hw.last_period);
 	regs.ip     = 0;
 
 	/*
@@ -401,14 +400,7 @@ struct event_constraint intel_snb_pebs_event_constraints[] = {
 	INTEL_EVENT_CONSTRAINT(0xc4, 0xf),    /* BR_INST_RETIRED.* */
 	INTEL_EVENT_CONSTRAINT(0xc5, 0xf),    /* BR_MISP_RETIRED.* */
 	INTEL_EVENT_CONSTRAINT(0xcd, 0x8),    /* MEM_TRANS_RETIRED.* */
-	INTEL_UEVENT_CONSTRAINT(0x11d0, 0xf), /* MEM_UOP_RETIRED.STLB_MISS_LOADS */
-	INTEL_UEVENT_CONSTRAINT(0x12d0, 0xf), /* MEM_UOP_RETIRED.STLB_MISS_STORES */
-	INTEL_UEVENT_CONSTRAINT(0x21d0, 0xf), /* MEM_UOP_RETIRED.LOCK_LOADS */
-	INTEL_UEVENT_CONSTRAINT(0x22d0, 0xf), /* MEM_UOP_RETIRED.LOCK_STORES */
-	INTEL_UEVENT_CONSTRAINT(0x41d0, 0xf), /* MEM_UOP_RETIRED.SPLIT_LOADS */
-	INTEL_UEVENT_CONSTRAINT(0x42d0, 0xf), /* MEM_UOP_RETIRED.SPLIT_STORES */
-	INTEL_UEVENT_CONSTRAINT(0x81d0, 0xf), /* MEM_UOP_RETIRED.ANY_LOADS */
-	INTEL_UEVENT_CONSTRAINT(0x82d0, 0xf), /* MEM_UOP_RETIRED.ANY_STORES */
+	INTEL_EVENT_CONSTRAINT(0xd0, 0xf),    /* MEM_UOP_RETIRED.* */
 	INTEL_EVENT_CONSTRAINT(0xd1, 0xf),    /* MEM_LOAD_UOPS_RETIRED.* */
 	INTEL_EVENT_CONSTRAINT(0xd2, 0xf),    /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */
 	INTEL_UEVENT_CONSTRAINT(0x02d4, 0xf), /* MEM_LOAD_UOPS_MISC_RETIRED.LLC_MISS */
@@ -564,8 +556,7 @@ static void __intel_pmu_pebs_event(struct perf_event *event,
 	if (!intel_pmu_save_and_restart(event))
 		return;
 
-	perf_sample_data_init(&data, 0);
-	data.period = event->hw.last_period;
+	perf_sample_data_init(&data, 0, event->hw.last_period);
 
 	/*
 	 * We use the interrupt regs as a base because the PEBS record
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index a2dfacf..47124a7 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -1005,8 +1005,6 @@ static int p4_pmu_handle_irq(struct pt_regs *regs)
 	int idx, handled = 0;
 	u64 val;
 
-	perf_sample_data_init(&data, 0);
-
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
 	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
@@ -1034,10 +1032,12 @@ static int p4_pmu_handle_irq(struct pt_regs *regs)
 		handled += overflow;
 
 		/* event overflow for sure */
-		data.period = event->hw.last_period;
+		perf_sample_data_init(&data, 0, hwc->last_period);
 
 		if (!x86_perf_event_set_period(event))
 			continue;
+
+
 		if (perf_event_overflow(event, &data, regs))
 			x86_pmu_stop(event, 0);
 	}
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 1b81839..571246d 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -271,7 +271,7 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 			current->thread.trap_nr, SIGSEGV) == NOTIFY_STOP)
 		return 1;
 
-	show_registers(regs);
+	show_regs(regs);
 #ifdef CONFIG_X86_32
 	if (user_mode_vm(regs)) {
 		sp = regs->sp;
@@ -311,16 +311,33 @@ void die(const char *str, struct pt_regs *regs, long err)
 
 static int __init kstack_setup(char *s)
 {
+	ssize_t ret;
+	unsigned long val;
+
 	if (!s)
 		return -EINVAL;
-	kstack_depth_to_print = simple_strtoul(s, NULL, 0);
+
+	ret = kstrtoul(s, 0, &val);
+	if (ret)
+		return ret;
+	kstack_depth_to_print = val;
 	return 0;
 }
 early_param("kstack", kstack_setup);
 
 static int __init code_bytes_setup(char *s)
 {
-	code_bytes = simple_strtoul(s, NULL, 0);
+	ssize_t ret;
+	unsigned long val;
+
+	if (!s)
+		return -EINVAL;
+
+	ret = kstrtoul(s, 0, &val);
+	if (ret)
+		return ret;
+
+	code_bytes = val;
 	if (code_bytes > 8192)
 		code_bytes = 8192;
 
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index 88ec912..e0b1d78 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -82,7 +82,7 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 }
 
 
-void show_registers(struct pt_regs *regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 17107bd..791b761 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -245,7 +245,7 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
 }
 
-void show_registers(struct pt_regs *regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 	unsigned long sp;
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 62d61e9..4185797 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -113,7 +113,9 @@ static void __init __e820_add_region(struct e820map *e820x, u64 start, u64 size,
 	int x = e820x->nr_map;
 
 	if (x >= ARRAY_SIZE(e820x->map)) {
-		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
+		printk(KERN_ERR "e820: too many entries; ignoring [mem %#010llx-%#010llx]\n",
+		       (unsigned long long) start,
+		       (unsigned long long) (start + size - 1));
 		return;
 	}
 
@@ -133,19 +135,19 @@ static void __init e820_print_type(u32 type)
 	switch (type) {
 	case E820_RAM:
 	case E820_RESERVED_KERN:
-		printk(KERN_CONT "(usable)");
+		printk(KERN_CONT "usable");
 		break;
 	case E820_RESERVED:
-		printk(KERN_CONT "(reserved)");
+		printk(KERN_CONT "reserved");
 		break;
 	case E820_ACPI:
-		printk(KERN_CONT "(ACPI data)");
+		printk(KERN_CONT "ACPI data");
 		break;
 	case E820_NVS:
-		printk(KERN_CONT "(ACPI NVS)");
+		printk(KERN_CONT "ACPI NVS");
 		break;
 	case E820_UNUSABLE:
-		printk(KERN_CONT "(unusable)");
+		printk(KERN_CONT "unusable");
 		break;
 	default:
 		printk(KERN_CONT "type %u", type);
@@ -158,10 +160,10 @@ void __init e820_print_map(char *who)
 	int i;
 
 	for (i = 0; i < e820.nr_map; i++) {
-		printk(KERN_INFO " %s: %016Lx - %016Lx ", who,
+		printk(KERN_INFO "%s: [mem %#018Lx-%#018Lx] ", who,
 		       (unsigned long long) e820.map[i].addr,
 		       (unsigned long long)
-		       (e820.map[i].addr + e820.map[i].size));
+		       (e820.map[i].addr + e820.map[i].size - 1));
 		e820_print_type(e820.map[i].type);
 		printk(KERN_CONT "\n");
 	}
@@ -428,9 +430,8 @@ static u64 __init __e820_update_range(struct e820map *e820x, u64 start,
 		size = ULLONG_MAX - start;
 
 	end = start + size;
-	printk(KERN_DEBUG "e820 update range: %016Lx - %016Lx ",
-		       (unsigned long long) start,
-		       (unsigned long long) end);
+	printk(KERN_DEBUG "e820: update [mem %#010Lx-%#010Lx] ",
+	       (unsigned long long) start, (unsigned long long) (end - 1));
 	e820_print_type(old_type);
 	printk(KERN_CONT " ==> ");
 	e820_print_type(new_type);
@@ -509,9 +510,8 @@ u64 __init e820_remove_range(u64 start, u64 size, unsigned old_type,
 		size = ULLONG_MAX - start;
 
 	end = start + size;
-	printk(KERN_DEBUG "e820 remove range: %016Lx - %016Lx ",
-		       (unsigned long long) start,
-		       (unsigned long long) end);
+	printk(KERN_DEBUG "e820: remove [mem %#010Lx-%#010Lx] ",
+	       (unsigned long long) start, (unsigned long long) (end - 1));
 	if (checktype)
 		e820_print_type(old_type);
 	printk(KERN_CONT "\n");
@@ -567,7 +567,7 @@ void __init update_e820(void)
 	if (sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &nr_map))
 		return;
 	e820.nr_map = nr_map;
-	printk(KERN_INFO "modified physical RAM map:\n");
+	printk(KERN_INFO "e820: modified physical RAM map:\n");
 	e820_print_map("modified");
 }
 static void __init update_e820_saved(void)
@@ -637,8 +637,8 @@ __init void e820_setup_gap(void)
 	if (!found) {
 		gapstart = (max_pfn << PAGE_SHIFT) + 1024*1024;
 		printk(KERN_ERR
-	"PCI: Warning: Cannot find a gap in the 32bit address range\n"
-	"PCI: Unassigned devices with 32bit resource registers may break!\n");
+	"e820: cannot find a gap in the 32bit address range\n"
+	"e820: PCI devices with unassigned 32bit BARs may break!\n");
 	}
 #endif
 
@@ -648,8 +648,8 @@ __init void e820_setup_gap(void)
 	pci_mem_start = gapstart;
 
 	printk(KERN_INFO
-	       "Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
-	       pci_mem_start, gapstart, gapsize);
+	       "e820: [mem %#010lx-%#010lx] available for PCI devices\n",
+	       gapstart, gapstart + gapsize - 1);
 }
 
 /**
@@ -667,7 +667,7 @@ void __init parse_e820_ext(struct setup_data *sdata)
 	extmap = (struct e820entry *)(sdata->data);
 	__append_e820_map(extmap, entries);
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
-	printk(KERN_INFO "extended physical RAM map:\n");
+	printk(KERN_INFO "e820: extended physical RAM map:\n");
 	e820_print_map("extended");
 }
 
@@ -734,7 +734,7 @@ u64 __init early_reserve_e820(u64 size, u64 align)
 	addr = __memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
 	if (addr) {
 		e820_update_range_saved(addr, size, E820_RAM, E820_RESERVED);
-		printk(KERN_INFO "update e820_saved for early_reserve_e820\n");
+		printk(KERN_INFO "e820: update e820_saved for early_reserve_e820\n");
 		update_e820_saved();
 	}
 
@@ -784,7 +784,7 @@ static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
 	if (last_pfn > max_arch_pfn)
 		last_pfn = max_arch_pfn;
 
-	printk(KERN_INFO "last_pfn = %#lx max_arch_pfn = %#lx\n",
+	printk(KERN_INFO "e820: last_pfn = %#lx max_arch_pfn = %#lx\n",
 			 last_pfn, max_arch_pfn);
 	return last_pfn;
 }
@@ -888,7 +888,7 @@ void __init finish_e820_parsing(void)
 			early_panic("Invalid user supplied memory map");
 		e820.nr_map = nr;
 
-		printk(KERN_INFO "user-defined physical RAM map:\n");
+		printk(KERN_INFO "e820: user-defined physical RAM map:\n");
 		e820_print_map("user");
 	}
 }
@@ -996,8 +996,9 @@ void __init e820_reserve_resources_late(void)
 			end = MAX_RESOURCE_SIZE;
 		if (start >= end)
 			continue;
-		printk(KERN_DEBUG "reserve RAM buffer: %016llx - %016llx ",
-			       start, end);
+		printk(KERN_DEBUG
+		       "e820: reserve RAM buffer [mem %#010llx-%#010llx]\n",
+		       start, end);
 		reserve_region_with_split(&iomem_resource, start, end,
 					  "RAM buffer");
 	}
@@ -1047,7 +1048,7 @@ void __init setup_memory_map(void)
 
 	who = x86_init.resources.memory_setup();
 	memcpy(&e820_saved, &e820, sizeof(struct e820map));
-	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
+	printk(KERN_INFO "e820: BIOS-provided physical RAM map:\n");
 	e820_print_map(who);
 }
 
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 7b784f4..623f288 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -56,6 +56,7 @@
 #include <asm/irq_vectors.h>
 #include <asm/cpufeature.h>
 #include <asm/alternative-asm.h>
+#include <asm/asm.h>
 
 /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
 #include <linux/elf-em.h>
@@ -151,10 +152,8 @@
 .pushsection .fixup, "ax"
 99:	movl $0, (%esp)
 	jmp 98b
-.section __ex_table, "a"
-	.align 4
-	.long 98b, 99b
 .popsection
+	_ASM_EXTABLE(98b,99b)
 .endm
 
 .macro PTGS_TO_GS
@@ -164,10 +163,8 @@
 .pushsection .fixup, "ax"
 99:	movl $0, PT_GS(%esp)
 	jmp 98b
-.section __ex_table, "a"
-	.align 4
-	.long 98b, 99b
 .popsection
+	_ASM_EXTABLE(98b,99b)
 .endm
 
 .macro GS_TO_REG reg
@@ -249,12 +246,10 @@
 	jmp 2b
 6:	movl $0, (%esp)
 	jmp 3b
-.section __ex_table, "a"
-	.align 4
-	.long 1b, 4b
-	.long 2b, 5b
-	.long 3b, 6b
 .popsection
+	_ASM_EXTABLE(1b,4b)
+	_ASM_EXTABLE(2b,5b)
+	_ASM_EXTABLE(3b,6b)
 	POP_GS_EX
 .endm
 
@@ -321,7 +316,6 @@ ret_from_exception:
 	preempt_stop(CLBR_ANY)
 ret_from_intr:
 	GET_THREAD_INFO(%ebp)
-resume_userspace_sig:
 #ifdef CONFIG_VM86
 	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS and CS
 	movb PT_CS(%esp), %al
@@ -415,10 +409,7 @@ sysenter_past_esp:
 	jae syscall_fault
 1:	movl (%ebp),%ebp
 	movl %ebp,PT_EBP(%esp)
-.section __ex_table,"a"
-	.align 4
-	.long 1b,syscall_fault
-.previous
+	_ASM_EXTABLE(1b,syscall_fault)
 
 	GET_THREAD_INFO(%ebp)
 
@@ -485,10 +476,8 @@ sysexit_audit:
 .pushsection .fixup,"ax"
 2:	movl $0,PT_FS(%esp)
 	jmp 1b
-.section __ex_table,"a"
-	.align 4
-	.long 1b,2b
 .popsection
+	_ASM_EXTABLE(1b,2b)
 	PTGS_TO_GS_EX
 ENDPROC(ia32_sysenter_target)
 
@@ -543,10 +532,7 @@ ENTRY(iret_exc)
 	pushl $do_iret_error
 	jmp error_code
 .previous
-.section __ex_table,"a"
-	.align 4
-	.long irq_return,iret_exc
-.previous
+	_ASM_EXTABLE(irq_return,iret_exc)
 
 	CFI_RESTORE_STATE
 ldt_ss:
@@ -628,9 +614,13 @@ work_notifysig:				# deal with pending signals and
 					# vm86-space
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
+	movb PT_CS(%esp), %bl
+	andb $SEGMENT_RPL_MASK, %bl
+	cmpb $USER_RPL, %bl
+	jb resume_kernel
 	xorl %edx, %edx
 	call do_notify_resume
-	jmp resume_userspace_sig
+	jmp resume_userspace
 
 	ALIGN
 work_notifysig_v86:
@@ -643,9 +633,13 @@ work_notifysig_v86:
 #endif
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
+	movb PT_CS(%esp), %bl
+	andb $SEGMENT_RPL_MASK, %bl
+	cmpb $USER_RPL, %bl
+	jb resume_kernel
 	xorl %edx, %edx
 	call do_notify_resume
-	jmp resume_userspace_sig
+	jmp resume_userspace
 END(work_pending)
 
 	# perform syscall exit tracing
@@ -901,10 +895,7 @@ END(device_not_available)
 #ifdef CONFIG_PARAVIRT
 ENTRY(native_iret)
 	iret
-.section __ex_table,"a"
-	.align 4
-	.long native_iret, iret_exc
-.previous
+	_ASM_EXTABLE(native_iret, iret_exc)
 END(native_iret)
 
 ENTRY(native_irq_enable_sysexit)
@@ -1093,13 +1084,10 @@ ENTRY(xen_failsafe_callback)
 	movl %eax,16(%esp)
 	jmp 4b
 .previous
-.section __ex_table,"a"
-	.align 4
-	.long 1b,6b
-	.long 2b,7b
-	.long 3b,8b
-	.long 4b,9b
-.previous
+	_ASM_EXTABLE(1b,6b)
+	_ASM_EXTABLE(2b,7b)
+	_ASM_EXTABLE(3b,8b)
+	_ASM_EXTABLE(4b,9b)
 ENDPROC(xen_failsafe_callback)
 
 BUILD_INTERRUPT3(xen_hvm_callback_vector, XEN_HVM_EVTCHN_CALLBACK,
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index cdc79b5..7d65133 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -55,6 +55,7 @@
 #include <asm/paravirt.h>
 #include <asm/ftrace.h>
 #include <asm/percpu.h>
+#include <asm/asm.h>
 #include <linux/err.h>
 
 /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
@@ -190,6 +191,44 @@ ENDPROC(native_usergs_sysret64)
 .endm
 
 /*
+ * When dynamic function tracer is enabled it will add a breakpoint
+ * to all locations that it is about to modify, sync CPUs, update
+ * all the code, sync CPUs, then remove the breakpoints. In this time
+ * if lockdep is enabled, it might jump back into the debug handler
+ * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF).
+ *
+ * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to
+ * make sure the stack pointer does not get reset back to the top
+ * of the debug stack, and instead just reuses the current stack.
+ */
+#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS)
+
+.macro TRACE_IRQS_OFF_DEBUG
+	call debug_stack_set_zero
+	TRACE_IRQS_OFF
+	call debug_stack_reset
+.endm
+
+.macro TRACE_IRQS_ON_DEBUG
+	call debug_stack_set_zero
+	TRACE_IRQS_ON
+	call debug_stack_reset
+.endm
+
+.macro TRACE_IRQS_IRETQ_DEBUG offset=ARGOFFSET
+	bt   $9,EFLAGS-\offset(%rsp)	/* interrupts off? */
+	jnc  1f
+	TRACE_IRQS_ON_DEBUG
+1:
+.endm
+
+#else
+# define TRACE_IRQS_OFF_DEBUG		TRACE_IRQS_OFF
+# define TRACE_IRQS_ON_DEBUG		TRACE_IRQS_ON
+# define TRACE_IRQS_IRETQ_DEBUG		TRACE_IRQS_IRETQ
+#endif
+
+/*
  * C code is not supposed to know about undefined top of stack. Every time
  * a C function with an pt_regs argument is called from the SYSCALL based
  * fast path FIXUP_TOP_OF_STACK is needed.
@@ -900,18 +939,12 @@ restore_args:
 
 irq_return:
 	INTERRUPT_RETURN
-
-	.section __ex_table, "a"
-	.quad irq_return, bad_iret
-	.previous
+	_ASM_EXTABLE(irq_return, bad_iret)
 
 #ifdef CONFIG_PARAVIRT
 ENTRY(native_iret)
 	iretq
-
-	.section __ex_table,"a"
-	.quad native_iret, bad_iret
-	.previous
+	_ASM_EXTABLE(native_iret, bad_iret)
 #endif
 
 	.section .fixup,"ax"
@@ -1103,7 +1136,7 @@ ENTRY(\sym)
 	subq $ORIG_RAX-R15, %rsp
 	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
 	call save_paranoid
-	TRACE_IRQS_OFF
+	TRACE_IRQS_OFF_DEBUG
 	movq %rsp,%rdi		/* pt_regs pointer */
 	xorl %esi,%esi		/* no error code */
 	subq $EXCEPTION_STKSZ, INIT_TSS_IST(\ist)
@@ -1181,10 +1214,7 @@ gs_change:
 	CFI_ENDPROC
 END(native_load_gs_index)
 
-	.section __ex_table,"a"
-	.align 8
-	.quad gs_change,bad_gs
-	.previous
+	_ASM_EXTABLE(gs_change,bad_gs)
 	.section .fixup,"ax"
 	/* running with kernelgs */
 bad_gs:
@@ -1401,7 +1431,7 @@ paranoidzeroentry machine_check *machine_check_vector(%rip)
 ENTRY(paranoid_exit)
 	DEFAULT_FRAME
 	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
+	TRACE_IRQS_OFF_DEBUG
 	testl %ebx,%ebx				/* swapgs needed? */
 	jnz paranoid_restore
 	testl $3,CS(%rsp)
@@ -1412,7 +1442,7 @@ paranoid_swapgs:
 	RESTORE_ALL 8
 	jmp irq_return
 paranoid_restore:
-	TRACE_IRQS_IRETQ 0
+	TRACE_IRQS_IRETQ_DEBUG 0
 	RESTORE_ALL 8
 	jmp irq_return
 paranoid_userspace:
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index c9a281f..c3a7cb4 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -24,40 +24,21 @@
 #include <trace/syscall.h>
 
 #include <asm/cacheflush.h>
+#include <asm/kprobes.h>
 #include <asm/ftrace.h>
 #include <asm/nops.h>
-#include <asm/nmi.h>
-
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 
-/*
- * modifying_code is set to notify NMIs that they need to use
- * memory barriers when entering or exiting. But we don't want
- * to burden NMIs with unnecessary memory barriers when code
- * modification is not being done (which is most of the time).
- *
- * A mutex is already held when ftrace_arch_code_modify_prepare
- * and post_process are called. No locks need to be taken here.
- *
- * Stop machine will make sure currently running NMIs are done
- * and new NMIs will see the updated variable before we need
- * to worry about NMIs doing memory barriers.
- */
-static int modifying_code __read_mostly;
-static DEFINE_PER_CPU(int, save_modifying_code);
-
 int ftrace_arch_code_modify_prepare(void)
 {
 	set_kernel_text_rw();
 	set_all_modules_text_rw();
-	modifying_code = 1;
 	return 0;
 }
 
 int ftrace_arch_code_modify_post_process(void)
 {
-	modifying_code = 0;
 	set_all_modules_text_ro();
 	set_kernel_text_ro();
 	return 0;
@@ -90,134 +71,6 @@ static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
 	return calc.code;
 }
 
-/*
- * Modifying code must take extra care. On an SMP machine, if
- * the code being modified is also being executed on another CPU
- * that CPU will have undefined results and possibly take a GPF.
- * We use kstop_machine to stop other CPUS from exectuing code.
- * But this does not stop NMIs from happening. We still need
- * to protect against that. We separate out the modification of
- * the code to take care of this.
- *
- * Two buffers are added: An IP buffer and a "code" buffer.
- *
- * 1) Put the instruction pointer into the IP buffer
- *    and the new code into the "code" buffer.
- * 2) Wait for any running NMIs to finish and set a flag that says
- *    we are modifying code, it is done in an atomic operation.
- * 3) Write the code
- * 4) clear the flag.
- * 5) Wait for any running NMIs to finish.
- *
- * If an NMI is executed, the first thing it does is to call
- * "ftrace_nmi_enter". This will check if the flag is set to write
- * and if it is, it will write what is in the IP and "code" buffers.
- *
- * The trick is, it does not matter if everyone is writing the same
- * content to the code location. Also, if a CPU is executing code
- * it is OK to write to that code location if the contents being written
- * are the same as what exists.
- */
-
-#define MOD_CODE_WRITE_FLAG (1 << 31)	/* set when NMI should do the write */
-static atomic_t nmi_running = ATOMIC_INIT(0);
-static int mod_code_status;		/* holds return value of text write */
-static void *mod_code_ip;		/* holds the IP to write to */
-static const void *mod_code_newcode;	/* holds the text to write to the IP */
-
-static unsigned nmi_wait_count;
-static atomic_t nmi_update_count = ATOMIC_INIT(0);
-
-int ftrace_arch_read_dyn_info(char *buf, int size)
-{
-	int r;
-
-	r = snprintf(buf, size, "%u %u",
-		     nmi_wait_count,
-		     atomic_read(&nmi_update_count));
-	return r;
-}
-
-static void clear_mod_flag(void)
-{
-	int old = atomic_read(&nmi_running);
-
-	for (;;) {
-		int new = old & ~MOD_CODE_WRITE_FLAG;
-
-		if (old == new)
-			break;
-
-		old = atomic_cmpxchg(&nmi_running, old, new);
-	}
-}
-
-static void ftrace_mod_code(void)
-{
-	/*
-	 * Yes, more than one CPU process can be writing to mod_code_status.
-	 *    (and the code itself)
-	 * But if one were to fail, then they all should, and if one were
-	 * to succeed, then they all should.
-	 */
-	mod_code_status = probe_kernel_write(mod_code_ip, mod_code_newcode,
-					     MCOUNT_INSN_SIZE);
-
-	/* if we fail, then kill any new writers */
-	if (mod_code_status)
-		clear_mod_flag();
-}
-
-void ftrace_nmi_enter(void)
-{
-	__this_cpu_write(save_modifying_code, modifying_code);
-
-	if (!__this_cpu_read(save_modifying_code))
-		return;
-
-	if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) {
-		smp_rmb();
-		ftrace_mod_code();
-		atomic_inc(&nmi_update_count);
-	}
-	/* Must have previous changes seen before executions */
-	smp_mb();
-}
-
-void ftrace_nmi_exit(void)
-{
-	if (!__this_cpu_read(save_modifying_code))
-		return;
-
-	/* Finish all executions before clearing nmi_running */
-	smp_mb();
-	atomic_dec(&nmi_running);
-}
-
-static void wait_for_nmi_and_set_mod_flag(void)
-{
-	if (!atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG))
-		return;
-
-	do {
-		cpu_relax();
-	} while (atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG));
-
-	nmi_wait_count++;
-}
-
-static void wait_for_nmi(void)
-{
-	if (!atomic_read(&nmi_running))
-		return;
-
-	do {
-		cpu_relax();
-	} while (atomic_read(&nmi_running));
-
-	nmi_wait_count++;
-}
-
 static inline int
 within(unsigned long addr, unsigned long start, unsigned long end)
 {
@@ -238,26 +91,7 @@ do_ftrace_mod_code(unsigned long ip, const void *new_code)
 	if (within(ip, (unsigned long)_text, (unsigned long)_etext))
 		ip = (unsigned long)__va(__pa(ip));
 
-	mod_code_ip = (void *)ip;
-	mod_code_newcode = new_code;
-
-	/* The buffers need to be visible before we let NMIs write them */
-	smp_mb();
-
-	wait_for_nmi_and_set_mod_flag();
-
-	/* Make sure all running NMIs have finished before we write the code */
-	smp_mb();
-
-	ftrace_mod_code();
-
-	/* Make sure the write happens before clearing the bit */
-	smp_mb();
-
-	clear_mod_flag();
-	wait_for_nmi();
-
-	return mod_code_status;
+	return probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE);
 }
 
 static const unsigned char *ftrace_nop_replace(void)
@@ -266,7 +100,7 @@ static const unsigned char *ftrace_nop_replace(void)
 }
 
 static int
-ftrace_modify_code(unsigned long ip, unsigned const char *old_code,
+ftrace_modify_code_direct(unsigned long ip, unsigned const char *old_code,
 		   unsigned const char *new_code)
 {
 	unsigned char replaced[MCOUNT_INSN_SIZE];
@@ -307,7 +141,20 @@ int ftrace_make_nop(struct module *mod,
 	old = ftrace_call_replace(ip, addr);
 	new = ftrace_nop_replace();
 
-	return ftrace_modify_code(rec->ip, old, new);
+	/*
+	 * On boot up, and when modules are loaded, the MCOUNT_ADDR
+	 * is converted to a nop, and will never become MCOUNT_ADDR
+	 * again. This code is either running before SMP (on boot up)
+	 * or before the code will ever be executed (module load).
+	 * We do not want to use the breakpoint version in this case,
+	 * just modify the code directly.
+	 */
+	if (addr == MCOUNT_ADDR)
+		return ftrace_modify_code_direct(rec->ip, old, new);
+
+	/* Normal cases use add_brk_on_nop */
+	WARN_ONCE(1, "invalid use of ftrace_make_nop");
+	return -EINVAL;
 }
 
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
@@ -318,9 +165,47 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	old = ftrace_nop_replace();
 	new = ftrace_call_replace(ip, addr);
 
-	return ftrace_modify_code(rec->ip, old, new);
+	/* Should only be called when module is loaded */
+	return ftrace_modify_code_direct(rec->ip, old, new);
 }
 
+/*
+ * The modifying_ftrace_code is used to tell the breakpoint
+ * handler to call ftrace_int3_handler(). If it fails to
+ * call this handler for a breakpoint added by ftrace, then
+ * the kernel may crash.
+ *
+ * As atomic_writes on x86 do not need a barrier, we do not
+ * need to add smp_mb()s for this to work. It is also considered
+ * that we can not read the modifying_ftrace_code before
+ * executing the breakpoint. That would be quite remarkable if
+ * it could do that. Here's the flow that is required:
+ *
+ *   CPU-0                          CPU-1
+ *
+ * atomic_inc(mfc);
+ * write int3s
+ *				<trap-int3> // implicit (r)mb
+ *				if (atomic_read(mfc))
+ *					call ftrace_int3_handler()
+ *
+ * Then when we are finished:
+ *
+ * atomic_dec(mfc);
+ *
+ * If we hit a breakpoint that was not set by ftrace, it does not
+ * matter if ftrace_int3_handler() is called or not. It will
+ * simply be ignored. But it is crucial that a ftrace nop/caller
+ * breakpoint is handled. No other user should ever place a
+ * breakpoint on an ftrace nop/caller location. It must only
+ * be done by this code.
+ */
+atomic_t modifying_ftrace_code __read_mostly;
+
+static int
+ftrace_modify_code(unsigned long ip, unsigned const char *old_code,
+		   unsigned const char *new_code);
+
 int ftrace_update_ftrace_func(ftrace_func_t func)
 {
 	unsigned long ip = (unsigned long)(&ftrace_call);
@@ -329,9 +214,376 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 
 	memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
 	new = ftrace_call_replace(ip, (unsigned long)func);
+
+	/* See comment above by declaration of modifying_ftrace_code */
+	atomic_inc(&modifying_ftrace_code);
+
 	ret = ftrace_modify_code(ip, old, new);
 
+	atomic_dec(&modifying_ftrace_code);
+
+	return ret;
+}
+
+/*
+ * A breakpoint was added to the code address we are about to
+ * modify, and this is the handle that will just skip over it.
+ * We are either changing a nop into a trace call, or a trace
+ * call to a nop. While the change is taking place, we treat
+ * it just like it was a nop.
+ */
+int ftrace_int3_handler(struct pt_regs *regs)
+{
+	if (WARN_ON_ONCE(!regs))
+		return 0;
+
+	if (!ftrace_location(regs->ip - 1))
+		return 0;
+
+	regs->ip += MCOUNT_INSN_SIZE - 1;
+
+	return 1;
+}
+
+static int ftrace_write(unsigned long ip, const char *val, int size)
+{
+	/*
+	 * On x86_64, kernel text mappings are mapped read-only with
+	 * CONFIG_DEBUG_RODATA. So we use the kernel identity mapping instead
+	 * of the kernel text mapping to modify the kernel text.
+	 *
+	 * For 32bit kernels, these mappings are same and we can use
+	 * kernel identity mapping to modify code.
+	 */
+	if (within(ip, (unsigned long)_text, (unsigned long)_etext))
+		ip = (unsigned long)__va(__pa(ip));
+
+	return probe_kernel_write((void *)ip, val, size);
+}
+
+static int add_break(unsigned long ip, const char *old)
+{
+	unsigned char replaced[MCOUNT_INSN_SIZE];
+	unsigned char brk = BREAKPOINT_INSTRUCTION;
+
+	if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
+		return -EFAULT;
+
+	/* Make sure it is what we expect it to be */
+	if (memcmp(replaced, old, MCOUNT_INSN_SIZE) != 0)
+		return -EINVAL;
+
+	if (ftrace_write(ip, &brk, 1))
+		return -EPERM;
+
+	return 0;
+}
+
+static int add_brk_on_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned const char *old;
+	unsigned long ip = rec->ip;
+
+	old = ftrace_call_replace(ip, addr);
+
+	return add_break(rec->ip, old);
+}
+
+
+static int add_brk_on_nop(struct dyn_ftrace *rec)
+{
+	unsigned const char *old;
+
+	old = ftrace_nop_replace();
+
+	return add_break(rec->ip, old);
+}
+
+static int add_breakpoints(struct dyn_ftrace *rec, int enable)
+{
+	unsigned long ftrace_addr;
+	int ret;
+
+	ret = ftrace_test_record(rec, enable);
+
+	ftrace_addr = (unsigned long)FTRACE_ADDR;
+
+	switch (ret) {
+	case FTRACE_UPDATE_IGNORE:
+		return 0;
+
+	case FTRACE_UPDATE_MAKE_CALL:
+		/* converting nop to call */
+		return add_brk_on_nop(rec);
+
+	case FTRACE_UPDATE_MAKE_NOP:
+		/* converting a call to a nop */
+		return add_brk_on_call(rec, ftrace_addr);
+	}
+	return 0;
+}
+
+/*
+ * On error, we need to remove breakpoints. This needs to
+ * be done caefully. If the address does not currently have a
+ * breakpoint, we know we are done. Otherwise, we look at the
+ * remaining 4 bytes of the instruction. If it matches a nop
+ * we replace the breakpoint with the nop. Otherwise we replace
+ * it with the call instruction.
+ */
+static int remove_breakpoint(struct dyn_ftrace *rec)
+{
+	unsigned char ins[MCOUNT_INSN_SIZE];
+	unsigned char brk = BREAKPOINT_INSTRUCTION;
+	const unsigned char *nop;
+	unsigned long ftrace_addr;
+	unsigned long ip = rec->ip;
+
+	/* If we fail the read, just give up */
+	if (probe_kernel_read(ins, (void *)ip, MCOUNT_INSN_SIZE))
+		return -EFAULT;
+
+	/* If this does not have a breakpoint, we are done */
+	if (ins[0] != brk)
+		return -1;
+
+	nop = ftrace_nop_replace();
+
+	/*
+	 * If the last 4 bytes of the instruction do not match
+	 * a nop, then we assume that this is a call to ftrace_addr.
+	 */
+	if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) != 0) {
+		/*
+		 * For extra paranoidism, we check if the breakpoint is on
+		 * a call that would actually jump to the ftrace_addr.
+		 * If not, don't touch the breakpoint, we make just create
+		 * a disaster.
+		 */
+		ftrace_addr = (unsigned long)FTRACE_ADDR;
+		nop = ftrace_call_replace(ip, ftrace_addr);
+
+		if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) != 0)
+			return -EINVAL;
+	}
+
+	return probe_kernel_write((void *)ip, &nop[0], 1);
+}
+
+static int add_update_code(unsigned long ip, unsigned const char *new)
+{
+	/* skip breakpoint */
+	ip++;
+	new++;
+	if (ftrace_write(ip, new, MCOUNT_INSN_SIZE - 1))
+		return -EPERM;
+	return 0;
+}
+
+static int add_update_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long ip = rec->ip;
+	unsigned const char *new;
+
+	new = ftrace_call_replace(ip, addr);
+	return add_update_code(ip, new);
+}
+
+static int add_update_nop(struct dyn_ftrace *rec)
+{
+	unsigned long ip = rec->ip;
+	unsigned const char *new;
+
+	new = ftrace_nop_replace();
+	return add_update_code(ip, new);
+}
+
+static int add_update(struct dyn_ftrace *rec, int enable)
+{
+	unsigned long ftrace_addr;
+	int ret;
+
+	ret = ftrace_test_record(rec, enable);
+
+	ftrace_addr = (unsigned long)FTRACE_ADDR;
+
+	switch (ret) {
+	case FTRACE_UPDATE_IGNORE:
+		return 0;
+
+	case FTRACE_UPDATE_MAKE_CALL:
+		/* converting nop to call */
+		return add_update_call(rec, ftrace_addr);
+
+	case FTRACE_UPDATE_MAKE_NOP:
+		/* converting a call to a nop */
+		return add_update_nop(rec);
+	}
+
+	return 0;
+}
+
+static int finish_update_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+	unsigned long ip = rec->ip;
+	unsigned const char *new;
+
+	new = ftrace_call_replace(ip, addr);
+
+	if (ftrace_write(ip, new, 1))
+		return -EPERM;
+
+	return 0;
+}
+
+static int finish_update_nop(struct dyn_ftrace *rec)
+{
+	unsigned long ip = rec->ip;
+	unsigned const char *new;
+
+	new = ftrace_nop_replace();
+
+	if (ftrace_write(ip, new, 1))
+		return -EPERM;
+	return 0;
+}
+
+static int finish_update(struct dyn_ftrace *rec, int enable)
+{
+	unsigned long ftrace_addr;
+	int ret;
+
+	ret = ftrace_update_record(rec, enable);
+
+	ftrace_addr = (unsigned long)FTRACE_ADDR;
+
+	switch (ret) {
+	case FTRACE_UPDATE_IGNORE:
+		return 0;
+
+	case FTRACE_UPDATE_MAKE_CALL:
+		/* converting nop to call */
+		return finish_update_call(rec, ftrace_addr);
+
+	case FTRACE_UPDATE_MAKE_NOP:
+		/* converting a call to a nop */
+		return finish_update_nop(rec);
+	}
+
+	return 0;
+}
+
+static void do_sync_core(void *data)
+{
+	sync_core();
+}
+
+static void run_sync(void)
+{
+	int enable_irqs = irqs_disabled();
+
+	/* We may be called with interrupts disbled (on bootup). */
+	if (enable_irqs)
+		local_irq_enable();
+	on_each_cpu(do_sync_core, NULL, 1);
+	if (enable_irqs)
+		local_irq_disable();
+}
+
+void ftrace_replace_code(int enable)
+{
+	struct ftrace_rec_iter *iter;
+	struct dyn_ftrace *rec;
+	const char *report = "adding breakpoints";
+	int count = 0;
+	int ret;
+
+	for_ftrace_rec_iter(iter) {
+		rec = ftrace_rec_iter_record(iter);
+
+		ret = add_breakpoints(rec, enable);
+		if (ret)
+			goto remove_breakpoints;
+		count++;
+	}
+
+	run_sync();
+
+	report = "updating code";
+
+	for_ftrace_rec_iter(iter) {
+		rec = ftrace_rec_iter_record(iter);
+
+		ret = add_update(rec, enable);
+		if (ret)
+			goto remove_breakpoints;
+	}
+
+	run_sync();
+
+	report = "removing breakpoints";
+
+	for_ftrace_rec_iter(iter) {
+		rec = ftrace_rec_iter_record(iter);
+
+		ret = finish_update(rec, enable);
+		if (ret)
+			goto remove_breakpoints;
+	}
+
+	run_sync();
+
+	return;
+
+ remove_breakpoints:
+	ftrace_bug(ret, rec ? rec->ip : 0);
+	printk(KERN_WARNING "Failed on %s (%d):\n", report, count);
+	for_ftrace_rec_iter(iter) {
+		rec = ftrace_rec_iter_record(iter);
+		remove_breakpoint(rec);
+	}
+}
+
+static int
+ftrace_modify_code(unsigned long ip, unsigned const char *old_code,
+		   unsigned const char *new_code)
+{
+	int ret;
+
+	ret = add_break(ip, old_code);
+	if (ret)
+		goto out;
+
+	run_sync();
+
+	ret = add_update_code(ip, new_code);
+	if (ret)
+		goto fail_update;
+
+	run_sync();
+
+	ret = ftrace_write(ip, new_code, 1);
+	if (ret) {
+		ret = -EPERM;
+		goto out;
+	}
+	run_sync();
+ out:
 	return ret;
+
+ fail_update:
+	probe_kernel_write((void *)ip, &old_code[0], 1);
+	goto out;
+}
+
+void arch_ftrace_update_code(int command)
+{
+	/* See comment above by declaration of modifying_ftrace_code */
+	atomic_inc(&modifying_ftrace_code);
+
+	ftrace_modify_all_code(command);
+
+	atomic_dec(&modifying_ftrace_code);
 }
 
 int __init ftrace_dyn_arch_init(void *data)
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 51ff186..c18f59d 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -14,7 +14,6 @@
 #include <asm/sections.h>
 #include <asm/e820.h>
 #include <asm/page.h>
-#include <asm/trampoline.h>
 #include <asm/apic.h>
 #include <asm/io_apic.h>
 #include <asm/bios_ebda.h>
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 3a3b779..037df57 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -24,7 +24,6 @@
 #include <asm/sections.h>
 #include <asm/kdebug.h>
 #include <asm/e820.h>
-#include <asm/trampoline.h>
 #include <asm/bios_ebda.h>
 
 static void __init zap_identity_mappings(void)
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index ce0be7c..d42ab17 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -21,6 +21,7 @@
 #include <asm/msr-index.h>
 #include <asm/cpufeature.h>
 #include <asm/percpu.h>
+#include <asm/nops.h>
 
 /* Physical address */
 #define pa(X) ((X) - __PAGE_OFFSET)
@@ -273,10 +274,7 @@ num_subarch_entries = (. - subarch_entries) / 4
  * If cpu hotplug is not supported then this code can go in init section
  * which will be freed later
  */
-
 __CPUINIT
-
-#ifdef CONFIG_SMP
 ENTRY(startup_32_smp)
 	cld
 	movl $(__BOOT_DS),%eax
@@ -287,7 +285,7 @@ ENTRY(startup_32_smp)
 	movl pa(stack_start),%ecx
 	movl %eax,%ss
 	leal -__PAGE_OFFSET(%ecx),%esp
-#endif /* CONFIG_SMP */
+
 default_entry:
 
 /*
@@ -363,28 +361,23 @@ default_entry:
 	pushl $0
 	popfl
 
-#ifdef CONFIG_SMP
-	cmpb $0, ready
-	jnz checkCPUtype
-#endif /* CONFIG_SMP */
-
 /*
  * start system 32-bit setup. We need to re-do some of the things done
  * in 16-bit mode for the "real" operations.
  */
-	call setup_idt
-
-checkCPUtype:
-
-	movl $-1,X86_CPUID		#  -1 for no CPUID initially
-
+	movl setup_once_ref,%eax
+	andl %eax,%eax
+	jz 1f				# Did we do this already?
+	call *%eax
+1:
+	
 /* check if it is 486 or 386. */
 /*
  * XXX - this does a lot of unnecessary setup.  Alignment checks don't
  * apply at our cpl of 0 and the stack ought to be aligned already, and
  * we don't need to preserve eflags.
  */
-
+	movl $-1,X86_CPUID	# -1 for no CPUID initially
 	movb $3,X86		# at least 386
 	pushfl			# push EFLAGS
 	popl %eax		# get EFLAGS
@@ -450,21 +443,6 @@ is386:	movl $2,%ecx		# set MP
 	movl $(__KERNEL_PERCPU), %eax
 	movl %eax,%fs			# set this cpu's percpu
 
-#ifdef CONFIG_CC_STACKPROTECTOR
-	/*
-	 * The linker can't handle this by relocation.  Manually set
-	 * base address in stack canary segment descriptor.
-	 */
-	cmpb $0,ready
-	jne 1f
-	movl $gdt_page,%eax
-	movl $stack_canary,%ecx
-	movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
-	shrl $16, %ecx
-	movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
-	movb %ch, 8 * GDT_ENTRY_STACK_CANARY + 7(%eax)
-1:
-#endif
 	movl $(__KERNEL_STACK_CANARY),%eax
 	movl %eax,%gs
 
@@ -473,7 +451,6 @@ is386:	movl $2,%ecx		# set MP
 
 	cld			# gcc2 wants the direction flag cleared at all times
 	pushl $0		# fake return address for unwinder
-	movb $1, ready
 	jmp *(initial_code)
 
 /*
@@ -495,81 +472,122 @@ check_x87:
 	.byte 0xDB,0xE4		/* fsetpm for 287, ignored by 387 */
 	ret
 
+	
+#include "verify_cpu.S"
+
 /*
- *  setup_idt
+ *  setup_once
  *
- *  sets up a idt with 256 entries pointing to
- *  ignore_int, interrupt gates. It doesn't actually load
- *  idt - that can be done only after paging has been enabled
- *  and the kernel moved to PAGE_OFFSET. Interrupts
- *  are enabled elsewhere, when we can be relatively
- *  sure everything is ok.
+ *  The setup work we only want to run on the BSP.
  *
  *  Warning: %esi is live across this function.
  */
-setup_idt:
-	lea ignore_int,%edx
-	movl $(__KERNEL_CS << 16),%eax
-	movw %dx,%ax		/* selector = 0x0010 = cs */
-	movw $0x8E00,%dx	/* interrupt gate - dpl=0, present */
+__INIT
+setup_once:
+	/*
+	 * Set up a idt with 256 entries pointing to ignore_int,
+	 * interrupt gates. It doesn't actually load idt - that needs
+	 * to be done on each CPU. Interrupts are enabled elsewhere,
+	 * when we can be relatively sure everything is ok.
+	 */
 
-	lea idt_table,%edi
-	mov $256,%ecx
-rp_sidt:
+	movl $idt_table,%edi
+	movl $early_idt_handlers,%eax
+	movl $NUM_EXCEPTION_VECTORS,%ecx
+1:
 	movl %eax,(%edi)
-	movl %edx,4(%edi)
+	movl %eax,4(%edi)
+	/* interrupt gate, dpl=0, present */
+	movl $(0x8E000000 + __KERNEL_CS),2(%edi)
+	addl $9,%eax
 	addl $8,%edi
-	dec %ecx
-	jne rp_sidt
+	loop 1b
 
-.macro	set_early_handler handler,trapno
-	lea \handler,%edx
+	movl $256 - NUM_EXCEPTION_VECTORS,%ecx
+	movl $ignore_int,%edx
 	movl $(__KERNEL_CS << 16),%eax
-	movw %dx,%ax
+	movw %dx,%ax		/* selector = 0x0010 = cs */
 	movw $0x8E00,%dx	/* interrupt gate - dpl=0, present */
-	lea idt_table,%edi
-	movl %eax,8*\trapno(%edi)
-	movl %edx,8*\trapno+4(%edi)
-.endm
+2:
+	movl %eax,(%edi)
+	movl %edx,4(%edi)
+	addl $8,%edi
+	loop 2b
 
-	set_early_handler handler=early_divide_err,trapno=0
-	set_early_handler handler=early_illegal_opcode,trapno=6
-	set_early_handler handler=early_protection_fault,trapno=13
-	set_early_handler handler=early_page_fault,trapno=14
+#ifdef CONFIG_CC_STACKPROTECTOR
+	/*
+	 * Configure the stack canary. The linker can't handle this by
+	 * relocation.  Manually set base address in stack canary
+	 * segment descriptor.
+	 */
+	movl $gdt_page,%eax
+	movl $stack_canary,%ecx
+	movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
+	shrl $16, %ecx
+	movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
+	movb %ch, 8 * GDT_ENTRY_STACK_CANARY + 7(%eax)
+#endif
 
+	andl $0,setup_once_ref	/* Once is enough, thanks */
 	ret
 
-early_divide_err:
-	xor %edx,%edx
-	pushl $0	/* fake errcode */
-	jmp early_fault
+ENTRY(early_idt_handlers)
+	# 36(%esp) %eflags
+	# 32(%esp) %cs
+	# 28(%esp) %eip
+	# 24(%rsp) error code
+	i = 0
+	.rept NUM_EXCEPTION_VECTORS
+	.if (EXCEPTION_ERRCODE_MASK >> i) & 1
+	ASM_NOP2
+	.else
+	pushl $0		# Dummy error code, to make stack frame uniform
+	.endif
+	pushl $i		# 20(%esp) Vector number
+	jmp early_idt_handler
+	i = i + 1
+	.endr
+ENDPROC(early_idt_handlers)
+	
+	/* This is global to keep gas from relaxing the jumps */
+ENTRY(early_idt_handler)
+	cld
+	cmpl $2,%ss:early_recursion_flag
+	je hlt_loop
+	incl %ss:early_recursion_flag
 
-early_illegal_opcode:
-	movl $6,%edx
-	pushl $0	/* fake errcode */
-	jmp early_fault
+	push %eax		# 16(%esp)
+	push %ecx		# 12(%esp)
+	push %edx		#  8(%esp)
+	push %ds		#  4(%esp)
+	push %es		#  0(%esp)
+	movl $(__KERNEL_DS),%eax
+	movl %eax,%ds
+	movl %eax,%es
 
-early_protection_fault:
-	movl $13,%edx
-	jmp early_fault
+	cmpl $(__KERNEL_CS),32(%esp)
+	jne 10f
 
-early_page_fault:
-	movl $14,%edx
-	jmp early_fault
+	leal 28(%esp),%eax	# Pointer to %eip
+	call early_fixup_exception
+	andl %eax,%eax
+	jnz ex_entry		/* found an exception entry */
 
-early_fault:
-	cld
+10:
 #ifdef CONFIG_PRINTK
-	pusha
-	movl $(__KERNEL_DS),%eax
-	movl %eax,%ds
-	movl %eax,%es
-	cmpl $2,early_recursion_flag
-	je hlt_loop
-	incl early_recursion_flag
+	xorl %eax,%eax
+	movw %ax,2(%esp)	/* clean up the segment values on some cpus */
+	movw %ax,6(%esp)
+	movw %ax,34(%esp)
+	leal  40(%esp),%eax
+	pushl %eax		/* %esp before the exception */
+	pushl %ebx
+	pushl %ebp
+	pushl %esi
+	pushl %edi
 	movl %cr2,%eax
 	pushl %eax
-	pushl %edx		/* trapno */
+	pushl (20+6*4)(%esp)	/* trapno */
 	pushl $fault_msg
 	call printk
 #endif
@@ -578,6 +596,17 @@ hlt_loop:
 	hlt
 	jmp hlt_loop
 
+ex_entry:
+	pop %es
+	pop %ds
+	pop %edx
+	pop %ecx
+	pop %eax
+	addl $8,%esp		/* drop vector number and error code */
+	decl %ss:early_recursion_flag
+	iret
+ENDPROC(early_idt_handler)
+
 /* This is the default interrupt "handler" :-) */
 	ALIGN
 ignore_int:
@@ -611,13 +640,18 @@ ignore_int:
 	popl %eax
 #endif
 	iret
+ENDPROC(ignore_int)
+__INITDATA
+	.align 4
+early_recursion_flag:
+	.long 0
 
-#include "verify_cpu.S"
-
-	__REFDATA
-.align 4
+__REFDATA
+	.align 4
 ENTRY(initial_code)
 	.long i386_start_kernel
+ENTRY(setup_once_ref)
+	.long setup_once
 
 /*
  * BSS section
@@ -670,22 +704,19 @@ ENTRY(initial_page_table)
 ENTRY(stack_start)
 	.long init_thread_union+THREAD_SIZE
 
-early_recursion_flag:
-	.long 0
-
-ready:	.byte 0
-
+__INITRODATA
 int_msg:
 	.asciz "Unknown interrupt or fault at: %p %p %p\n"
 
 fault_msg:
 /* fault info: */
 	.ascii "BUG: Int %d: CR2 %p\n"
-/* pusha regs: */
-	.ascii "     EDI %p  ESI %p  EBP %p  ESP %p\n"
-	.ascii "     EBX %p  EDX %p  ECX %p  EAX %p\n"
+/* regs pushed in early_idt_handler: */
+	.ascii "     EDI %p  ESI %p  EBP %p  EBX %p\n"
+	.ascii "     ESP %p   ES %p   DS %p\n"
+	.ascii "     EDX %p  ECX %p  EAX %p\n"
 /* fault frame: */
-	.ascii "     err %p  EIP %p   CS %p  flg %p\n"
+	.ascii "     vec %p  err %p  EIP %p   CS %p  flg %p\n"
 	.ascii "Stack: %p %p %p %p %p %p %p %p\n"
 	.ascii "       %p %p %p %p %p %p %p %p\n"
 	.asciz "       %p %p %p %p %p %p %p %p\n"
@@ -699,6 +730,7 @@ fault_msg:
  * segment size, and 32-bit linear address value:
  */
 
+	.data
 .globl boot_gdt_descr
 .globl idt_descr
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 40f4eb3..94bf9cc 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -19,12 +19,15 @@
 #include <asm/cache.h>
 #include <asm/processor-flags.h>
 #include <asm/percpu.h>
+#include <asm/nops.h>
 
 #ifdef CONFIG_PARAVIRT
 #include <asm/asm-offsets.h>
 #include <asm/paravirt.h>
+#define GET_CR2_INTO(reg) GET_CR2_INTO_RAX ; movq %rax, reg
 #else
-#define GET_CR2_INTO_RCX movq %cr2, %rcx
+#define GET_CR2_INTO(reg) movq %cr2, reg
+#define INTERRUPT_RETURN iretq
 #endif
 
 /* we are not able to switch in one step to the final KERNEL ADDRESS SPACE
@@ -136,10 +139,6 @@ ident_complete:
 	/* Fixup phys_base */
 	addq	%rbp, phys_base(%rip)
 
-	/* Fixup trampoline */
-	addq	%rbp, trampoline_level4_pgt + 0(%rip)
-	addq	%rbp, trampoline_level4_pgt + (511*8)(%rip)
-
 	/* Due to ENTRY(), sometimes the empty space gets filled with
 	 * zeros. Better take a jmp than relying on empty space being
 	 * filled with 0x90 (nop)
@@ -270,36 +269,56 @@ bad_address:
 	jmp bad_address
 
 	.section ".init.text","ax"
-#ifdef CONFIG_EARLY_PRINTK
 	.globl early_idt_handlers
 early_idt_handlers:
+	# 104(%rsp) %rflags
+	#  96(%rsp) %cs
+	#  88(%rsp) %rip
+	#  80(%rsp) error code
 	i = 0
 	.rept NUM_EXCEPTION_VECTORS
-	movl $i, %esi
+	.if (EXCEPTION_ERRCODE_MASK >> i) & 1
+	ASM_NOP2
+	.else
+	pushq $0		# Dummy error code, to make stack frame uniform
+	.endif
+	pushq $i		# 72(%rsp) Vector number
 	jmp early_idt_handler
 	i = i + 1
 	.endr
-#endif
 
 ENTRY(early_idt_handler)
-#ifdef CONFIG_EARLY_PRINTK
+	cld
+
 	cmpl $2,early_recursion_flag(%rip)
 	jz  1f
 	incl early_recursion_flag(%rip)
-	GET_CR2_INTO_RCX
-	movq %rcx,%r9
-	xorl %r8d,%r8d		# zero for error code
-	movl %esi,%ecx		# get vector number
-	# Test %ecx against mask of vectors that push error code.
-	cmpl $31,%ecx
-	ja 0f
-	movl $1,%eax
-	salq %cl,%rax
-	testl $0x27d00,%eax
-	je 0f
-	popq %r8		# get error code
-0:	movq 0(%rsp),%rcx	# get ip
-	movq 8(%rsp),%rdx	# get cs
+
+	pushq %rax		# 64(%rsp)
+	pushq %rcx		# 56(%rsp)
+	pushq %rdx		# 48(%rsp)
+	pushq %rsi		# 40(%rsp)
+	pushq %rdi		# 32(%rsp)
+	pushq %r8		# 24(%rsp)
+	pushq %r9		# 16(%rsp)
+	pushq %r10		#  8(%rsp)
+	pushq %r11		#  0(%rsp)
+
+	cmpl $__KERNEL_CS,96(%rsp)
+	jne 10f
+
+	leaq 88(%rsp),%rdi	# Pointer to %rip
+	call early_fixup_exception
+	andl %eax,%eax
+	jnz 20f			# Found an exception entry
+
+10:
+#ifdef CONFIG_EARLY_PRINTK
+	GET_CR2_INTO(%r9)	# can clobber any volatile register if pv
+	movl 80(%rsp),%r8d	# error code
+	movl 72(%rsp),%esi	# vector number
+	movl 96(%rsp),%edx	# %cs
+	movq 88(%rsp),%rcx	# %rip
 	xorl %eax,%eax
 	leaq early_idt_msg(%rip),%rdi
 	call early_printk
@@ -308,17 +327,32 @@ ENTRY(early_idt_handler)
 	call dump_stack
 #ifdef CONFIG_KALLSYMS	
 	leaq early_idt_ripmsg(%rip),%rdi
-	movq 0(%rsp),%rsi	# get rip again
+	movq 40(%rsp),%rsi	# %rip again
 	call __print_symbol
 #endif
 #endif /* EARLY_PRINTK */
 1:	hlt
 	jmp 1b
 
-#ifdef CONFIG_EARLY_PRINTK
+20:	# Exception table entry found
+	popq %r11
+	popq %r10
+	popq %r9
+	popq %r8
+	popq %rdi
+	popq %rsi
+	popq %rdx
+	popq %rcx
+	popq %rax
+	addq $16,%rsp		# drop vector number and error code
+	decl early_recursion_flag(%rip)
+	INTERRUPT_RETURN
+
+	.balign 4
 early_recursion_flag:
 	.long 0
 
+#ifdef CONFIG_EARLY_PRINTK
 early_idt_msg:
 	.asciz "PANIC: early exception %02lx rip %lx:%lx error %lx cr2 %lx\n"
 early_idt_ripmsg:
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ad0de0c..1460a5d 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -94,13 +94,18 @@ static int hpet_verbose;
 
 static int __init hpet_setup(char *str)
 {
-	if (str) {
+	while (str) {
+		char *next = strchr(str, ',');
+
+		if (next)
+			*next++ = 0;
 		if (!strncmp("disable", str, 7))
 			boot_hpet_disable = 1;
 		if (!strncmp("force", str, 5))
 			hpet_force_user = 1;
 		if (!strncmp("verbose", str, 7))
 			hpet_verbose = 1;
+		str = next;
 	}
 	return 1;
 }
@@ -319,8 +324,6 @@ static void hpet_set_mode(enum clock_event_mode mode,
 		now = hpet_readl(HPET_COUNTER);
 		cmp = now + (unsigned int) delta;
 		cfg = hpet_readl(HPET_Tn_CFG(timer));
-		/* Make sure we use edge triggered interrupts */
-		cfg &= ~HPET_TN_LEVEL;
 		cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
 		       HPET_TN_SETVAL | HPET_TN_32BIT;
 		hpet_writel(cfg, HPET_Tn_CFG(timer));
@@ -787,15 +790,16 @@ static int hpet_clocksource_register(void)
 	return 0;
 }
 
+static u32 *hpet_boot_cfg;
+
 /**
  * hpet_enable - Try to setup the HPET timer. Returns 1 on success.
  */
 int __init hpet_enable(void)
 {
-	unsigned long hpet_period;
-	unsigned int id;
+	u32 hpet_period, cfg, id;
 	u64 freq;
-	int i;
+	unsigned int i, last;
 
 	if (!is_hpet_capable())
 		return 0;
@@ -847,15 +851,45 @@ int __init hpet_enable(void)
 	id = hpet_readl(HPET_ID);
 	hpet_print_config();
 
+	last = (id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT;
+
 #ifdef CONFIG_HPET_EMULATE_RTC
 	/*
 	 * The legacy routing mode needs at least two channels, tick timer
 	 * and the rtc emulation channel.
 	 */
-	if (!(id & HPET_ID_NUMBER))
+	if (!last)
 		goto out_nohpet;
 #endif
 
+	cfg = hpet_readl(HPET_CFG);
+	hpet_boot_cfg = kmalloc((last + 2) * sizeof(*hpet_boot_cfg),
+				GFP_KERNEL);
+	if (hpet_boot_cfg)
+		*hpet_boot_cfg = cfg;
+	else
+		pr_warn("HPET initial state will not be saved\n");
+	cfg &= ~(HPET_CFG_ENABLE | HPET_CFG_LEGACY);
+	hpet_writel(cfg, HPET_CFG);
+	if (cfg)
+		pr_warn("HPET: Unrecognized bits %#x set in global cfg\n",
+			cfg);
+
+	for (i = 0; i <= last; ++i) {
+		cfg = hpet_readl(HPET_Tn_CFG(i));
+		if (hpet_boot_cfg)
+			hpet_boot_cfg[i + 1] = cfg;
+		cfg &= ~(HPET_TN_ENABLE | HPET_TN_LEVEL | HPET_TN_FSB);
+		hpet_writel(cfg, HPET_Tn_CFG(i));
+		cfg &= ~(HPET_TN_PERIODIC | HPET_TN_PERIODIC_CAP
+			 | HPET_TN_64BIT_CAP | HPET_TN_32BIT | HPET_TN_ROUTE
+			 | HPET_TN_FSB | HPET_TN_FSB_CAP);
+		if (cfg)
+			pr_warn("HPET: Unrecognized bits %#x set in cfg#%u\n",
+				cfg, i);
+	}
+	hpet_print_config();
+
 	if (hpet_clocksource_register())
 		goto out_nohpet;
 
@@ -923,14 +957,28 @@ fs_initcall(hpet_late_init);
 void hpet_disable(void)
 {
 	if (is_hpet_capable() && hpet_virt_address) {
-		unsigned int cfg = hpet_readl(HPET_CFG);
+		unsigned int cfg = hpet_readl(HPET_CFG), id, last;
 
-		if (hpet_legacy_int_enabled) {
+		if (hpet_boot_cfg)
+			cfg = *hpet_boot_cfg;
+		else if (hpet_legacy_int_enabled) {
 			cfg &= ~HPET_CFG_LEGACY;
 			hpet_legacy_int_enabled = 0;
 		}
 		cfg &= ~HPET_CFG_ENABLE;
 		hpet_writel(cfg, HPET_CFG);
+
+		if (!hpet_boot_cfg)
+			return;
+
+		id = hpet_readl(HPET_ID);
+		last = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT);
+
+		for (id = 0; id <= last; ++id)
+			hpet_writel(hpet_boot_cfg[id + 1], HPET_Tn_CFG(id));
+
+		if (*hpet_boot_cfg & HPET_CFG_ENABLE)
+			hpet_writel(*hpet_boot_cfg, HPET_CFG);
 	}
 }
 
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 7734bcb..f250431 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -88,7 +88,7 @@ void kernel_fpu_begin(void)
 		__thread_clear_has_fpu(me);
 		/* We do 'stts()' in kernel_fpu_end() */
 	} else {
-		percpu_write(fpu_owner_task, NULL);
+		this_cpu_write(fpu_owner_task, NULL);
 		clts();
 	}
 }
@@ -235,6 +235,7 @@ int init_fpu(struct task_struct *tsk)
 	if (tsk_used_math(tsk)) {
 		if (HAVE_HWFP && tsk == current)
 			unlazy_fpu(tsk);
+		tsk->thread.fpu.last_cpu = ~0;
 		return 0;
 	}
 
diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c
deleted file mode 100644
index 43e9ccf..0000000
--- a/arch/x86/kernel/init_task.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/fs.h>
-#include <linux/mqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/desc.h>
-
-static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-
-/*
- * Initial thread structure.
- *
- * We need to make sure that this is THREAD_SIZE aligned due to the
- * way process stacks are handled. This is done by having a special
- * "init_task" linker map entry..
- */
-union thread_union init_thread_union __init_task_data =
-	{ INIT_THREAD_INFO(init_task) };
-
-/*
- * Initial task structure.
- *
- * All other task structs will be allocated on slabs in fork.c
- */
-struct task_struct init_task = INIT_TASK(init_task);
-EXPORT_SYMBOL(init_task);
-
-/*
- * per-CPU TSS segments. Threads are completely 'soft' on Linux,
- * no more per-task TSS's. The TSS size is kept cacheline-aligned
- * so they are allowed to end up in the .data..cacheline_aligned
- * section. Since TSS's are completely CPU-local, we want them
- * on exact cacheline boundaries, to eliminate cacheline ping-pong.
- */
-DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss) = INIT_TSS;
-
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 58b7f27..344faf8 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -127,8 +127,8 @@ void __cpuinit irq_ctx_init(int cpu)
 		return;
 
 	irqctx = page_address(alloc_pages_node(cpu_to_node(cpu),
-					       THREAD_FLAGS,
-					       THREAD_ORDER));
+					       THREADINFO_GFP,
+					       THREAD_SIZE_ORDER));
 	memset(&irqctx->tinfo, 0, sizeof(struct thread_info));
 	irqctx->tinfo.cpu		= cpu;
 	irqctx->tinfo.preempt_count	= HARDIRQ_OFFSET;
@@ -137,8 +137,8 @@ void __cpuinit irq_ctx_init(int cpu)
 	per_cpu(hardirq_ctx, cpu) = irqctx;
 
 	irqctx = page_address(alloc_pages_node(cpu_to_node(cpu),
-					       THREAD_FLAGS,
-					       THREAD_ORDER));
+					       THREADINFO_GFP,
+					       THREAD_SIZE_ORDER));
 	memset(&irqctx->tinfo, 0, sizeof(struct thread_info));
 	irqctx->tinfo.cpu		= cpu;
 	irqctx->tinfo.addr_limit	= MAKE_MM_SEG(0);
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index e213fc8..e2f751e 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -1037,9 +1037,9 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 			       "current sp %p does not match saved sp %p\n",
 			       stack_addr(regs), kcb->jprobe_saved_sp);
 			printk(KERN_ERR "Saved registers for jprobe %p\n", jp);
-			show_registers(saved_regs);
+			show_regs(saved_regs);
 			printk(KERN_ERR "Current registers\n");
-			show_registers(regs);
+			show_regs(regs);
 			BUG();
 		}
 		*regs = kcb->jprobe_saved_regs;
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index b8ba6e4..e554e5a 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -79,7 +79,6 @@ struct kvm_task_sleep_node {
 	u32 token;
 	int cpu;
 	bool halted;
-	struct mm_struct *mm;
 };
 
 static struct kvm_task_sleep_head {
@@ -126,9 +125,7 @@ void kvm_async_pf_task_wait(u32 token)
 
 	n.token = token;
 	n.cpu = smp_processor_id();
-	n.mm = current->active_mm;
 	n.halted = idle || preempt_count() > 1;
-	atomic_inc(&n.mm->mm_count);
 	init_waitqueue_head(&n.wq);
 	hlist_add_head(&n.link, &b->list);
 	spin_unlock(&b->lock);
@@ -161,9 +158,6 @@ EXPORT_SYMBOL_GPL(kvm_async_pf_task_wait);
 static void apf_task_wake_one(struct kvm_task_sleep_node *n)
 {
 	hlist_del_init(&n->link);
-	if (!n->mm)
-		return;
-	mmdrop(n->mm);
 	if (n->halted)
 		smp_send_reschedule(n->cpu);
 	else if (waitqueue_active(&n->wq))
@@ -207,7 +201,7 @@ again:
 		 * async PF was not yet handled.
 		 * Add dummy entry for the token.
 		 */
-		n = kmalloc(sizeof(*n), GFP_ATOMIC);
+		n = kzalloc(sizeof(*n), GFP_ATOMIC);
 		if (!n) {
 			/*
 			 * Allocation failed! Busy wait while other cpu
@@ -219,7 +213,6 @@ again:
 		}
 		n->token = token;
 		n->cpu = smp_processor_id();
-		n->mm = NULL;
 		init_waitqueue_head(&n->wq);
 		hlist_add_head(&n->link, &b->list);
 	} else
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index f8492da..086eb58 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -22,6 +22,7 @@
 #include <asm/msr.h>
 #include <asm/apic.h>
 #include <linux/percpu.h>
+#include <linux/hardirq.h>
 
 #include <asm/x86_init.h>
 #include <asm/reboot.h>
@@ -114,6 +115,25 @@ static void kvm_get_preset_lpj(void)
 	preset_lpj = lpj;
 }
 
+bool kvm_check_and_clear_guest_paused(void)
+{
+	bool ret = false;
+	struct pvclock_vcpu_time_info *src;
+
+	/*
+	 * per_cpu() is safe here because this function is only called from
+	 * timer functions where preemption is already disabled.
+	 */
+	WARN_ON(!in_atomic());
+	src = &__get_cpu_var(hv_clock);
+	if ((src->flags & PVCLOCK_GUEST_STOPPED) != 0) {
+		__this_cpu_and(hv_clock.flags, ~PVCLOCK_GUEST_STOPPED);
+		ret = true;
+	}
+
+	return ret;
+}
+
 static struct clocksource kvm_clock = {
 	.name = "kvm-clock",
 	.read = kvm_clock_get_cycles,
diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c
deleted file mode 100644
index 7eb1e2b..0000000
--- a/arch/x86/kernel/mca_32.c
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- *  Written by Martin Kolinek, February 1996
- *
- * Changes:
- *
- *	Chris Beauregard July 28th, 1996
- *	- Fixed up integrated SCSI detection
- *
- *	Chris Beauregard August 3rd, 1996
- *	- Made mca_info local
- *	- Made integrated registers accessible through standard function calls
- *	- Added name field
- *	- More sanity checking
- *
- *	Chris Beauregard August 9th, 1996
- *	- Rewrote /proc/mca
- *
- *	Chris Beauregard January 7th, 1997
- *	- Added basic NMI-processing
- *	- Added more information to mca_info structure
- *
- *	David Weinehall October 12th, 1998
- *	- Made a lot of cleaning up in the source
- *	- Added use of save_flags / restore_flags
- *	- Added the 'driver_loaded' flag in MCA_adapter
- *	- Added an alternative implemention of ZP Gu's mca_find_unused_adapter
- *
- *	David Weinehall March 24th, 1999
- *	- Fixed the output of 'Driver Installed' in /proc/mca/pos
- *	- Made the Integrated Video & SCSI show up even if they have id 0000
- *
- *	Alexander Viro November 9th, 1999
- *	- Switched to regular procfs methods
- *
- *	Alfred Arnold & David Weinehall August 23rd, 2000
- *	- Added support for Planar POS-registers
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/mca.h>
-#include <linux/kprobes.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-#include <linux/proc_fs.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-#include <linux/ioport.h>
-#include <asm/uaccess.h>
-#include <linux/init.h>
-
-static unsigned char which_scsi;
-
-int MCA_bus;
-EXPORT_SYMBOL(MCA_bus);
-
-/*
- * Motherboard register spinlock. Untested on SMP at the moment, but
- * are there any MCA SMP boxes?
- *
- * Yes - Alan
- */
-static DEFINE_SPINLOCK(mca_lock);
-
-/* Build the status info for the adapter */
-
-static void mca_configure_adapter_status(struct mca_device *mca_dev)
-{
-	mca_dev->status = MCA_ADAPTER_NONE;
-
-	mca_dev->pos_id = mca_dev->pos[0]
-		+ (mca_dev->pos[1] << 8);
-
-	if (!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
-
-		/*
-		 * id = 0x0000 usually indicates hardware failure,
-		 * however, ZP Gu (zpg@castle.net> reports that his 9556
-		 * has 0x0000 as id and everything still works. There
-		 * also seem to be an adapter with id = 0x0000; the
-		 * NCR Parallel Bus Memory Card. Until this is confirmed,
-		 * however, this code will stay.
-		 */
-
-		mca_dev->status = MCA_ADAPTER_ERROR;
-
-		return;
-	} else if (mca_dev->pos_id != 0xffff) {
-
-		/*
-		 * 0xffff usually indicates that there's no adapter,
-		 * however, some integrated adapters may have 0xffff as
-		 * their id and still be valid. Examples are on-board
-		 * VGA of the 55sx, the integrated SCSI of the 56 & 57,
-		 * and possibly also the 95 ULTIMEDIA.
-		 */
-
-		mca_dev->status = MCA_ADAPTER_NORMAL;
-	}
-
-	if ((mca_dev->pos_id == 0xffff ||
-	    mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) {
-		int j;
-
-		for (j = 2; j < 8; j++) {
-			if (mca_dev->pos[j] != 0xff) {
-				mca_dev->status = MCA_ADAPTER_NORMAL;
-				break;
-			}
-		}
-	}
-
-	if (!(mca_dev->pos[2] & MCA_ENABLED)) {
-
-		/* enabled bit is in POS 2 */
-
-		mca_dev->status = MCA_ADAPTER_DISABLED;
-	}
-} /* mca_configure_adapter_status */
-
-/*--------------------------------------------------------------------*/
-
-static struct resource mca_standard_resources[] = {
-	{ .start = 0x60, .end = 0x60, .name = "system control port B (MCA)" },
-	{ .start = 0x90, .end = 0x90, .name = "arbitration (MCA)" },
-	{ .start = 0x91, .end = 0x91, .name = "card Select Feedback (MCA)" },
-	{ .start = 0x92, .end = 0x92, .name = "system Control port A (MCA)" },
-	{ .start = 0x94, .end = 0x94, .name = "system board setup (MCA)" },
-	{ .start = 0x96, .end = 0x97, .name = "POS (MCA)" },
-	{ .start = 0x100, .end = 0x107, .name = "POS (MCA)" }
-};
-
-#define MCA_STANDARD_RESOURCES	ARRAY_SIZE(mca_standard_resources)
-
-/*
- *	mca_read_and_store_pos - read the POS registers into a memory buffer
- *      @pos: a char pointer to 8 bytes, contains the POS register value on
- *            successful return
- *
- *	Returns 1 if a card actually exists (i.e. the pos isn't
- *	all 0xff) or 0 otherwise
- */
-static int mca_read_and_store_pos(unsigned char *pos)
-{
-	int j;
-	int found = 0;
-
-	for (j = 0; j < 8; j++) {
-		pos[j] = inb_p(MCA_POS_REG(j));
-		if (pos[j] != 0xff) {
-			/* 0xff all across means no device. 0x00 means
-			 * something's broken, but a device is
-			 * probably there.  However, if you get 0x00
-			 * from a motherboard register it won't matter
-			 * what we find.  For the record, on the
-			 * 57SLC, the integrated SCSI adapter has
-			 * 0xffff for the adapter ID, but nonzero for
-			 * other registers.  */
-
-			found = 1;
-		}
-	}
-	return found;
-}
-
-static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg)
-{
-	unsigned char byte;
-	unsigned long flags;
-
-	if (reg < 0 || reg >= 8)
-		return 0;
-
-	spin_lock_irqsave(&mca_lock, flags);
-	if (mca_dev->pos_register) {
-		/* Disable adapter setup, enable motherboard setup */
-
-		outb_p(0, MCA_ADAPTER_SETUP_REG);
-		outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
-
-		byte = inb_p(MCA_POS_REG(reg));
-		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-	} else {
-
-		/* Make sure motherboard setup is off */
-
-		outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
-		/* Read the appropriate register */
-
-		outb_p(0x8|(mca_dev->slot & 0xf), MCA_ADAPTER_SETUP_REG);
-		byte = inb_p(MCA_POS_REG(reg));
-		outb_p(0, MCA_ADAPTER_SETUP_REG);
-	}
-	spin_unlock_irqrestore(&mca_lock, flags);
-
-	mca_dev->pos[reg] = byte;
-
-	return byte;
-}
-
-static void mca_pc_write_pos(struct mca_device *mca_dev, int reg,
-			     unsigned char byte)
-{
-	unsigned long flags;
-
-	if (reg < 0 || reg >= 8)
-		return;
-
-	spin_lock_irqsave(&mca_lock, flags);
-
-	/* Make sure motherboard setup is off */
-
-	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
-	/* Read in the appropriate register */
-
-	outb_p(0x8|(mca_dev->slot&0xf), MCA_ADAPTER_SETUP_REG);
-	outb_p(byte, MCA_POS_REG(reg));
-	outb_p(0, MCA_ADAPTER_SETUP_REG);
-
-	spin_unlock_irqrestore(&mca_lock, flags);
-
-	/* Update the global register list, while we have the byte */
-
-	mca_dev->pos[reg] = byte;
-
-}
-
-/* for the primary MCA bus, we have identity transforms */
-static int mca_dummy_transform_irq(struct mca_device *mca_dev, int irq)
-{
-	return irq;
-}
-
-static int mca_dummy_transform_ioport(struct mca_device *mca_dev, int port)
-{
-	return port;
-}
-
-static void *mca_dummy_transform_memory(struct mca_device *mca_dev, void *mem)
-{
-	return mem;
-}
-
-
-static int __init mca_init(void)
-{
-	unsigned int i, j;
-	struct mca_device *mca_dev;
-	unsigned char pos[8];
-	short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00};
-	struct mca_bus *bus;
-
-	/*
-	 * WARNING: Be careful when making changes here. Putting an adapter
-	 * and the motherboard simultaneously into setup mode may result in
-	 * damage to chips (according to The Indispensable PC Hardware Book
-	 * by Hans-Peter Messmer). Also, we disable system interrupts (so
-	 * that we are not disturbed in the middle of this).
-	 */
-
-	/* Make sure the MCA bus is present */
-
-	if (mca_system_init()) {
-		printk(KERN_ERR "MCA bus system initialisation failed\n");
-		return -ENODEV;
-	}
-
-	if (!MCA_bus)
-		return -ENODEV;
-
-	printk(KERN_INFO "Micro Channel bus detected.\n");
-
-	/* All MCA systems have at least a primary bus */
-	bus = mca_attach_bus(MCA_PRIMARY_BUS);
-	if (!bus)
-		goto out_nomem;
-	bus->default_dma_mask = 0xffffffffLL;
-	bus->f.mca_write_pos = mca_pc_write_pos;
-	bus->f.mca_read_pos = mca_pc_read_pos;
-	bus->f.mca_transform_irq = mca_dummy_transform_irq;
-	bus->f.mca_transform_ioport = mca_dummy_transform_ioport;
-	bus->f.mca_transform_memory = mca_dummy_transform_memory;
-
-	/* get the motherboard device */
-	mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL);
-	if (unlikely(!mca_dev))
-		goto out_nomem;
-
-	/*
-	 * We do not expect many MCA interrupts during initialization,
-	 * but let us be safe:
-	 */
-	spin_lock_irq(&mca_lock);
-
-	/* Make sure adapter setup is off */
-
-	outb_p(0, MCA_ADAPTER_SETUP_REG);
-
-	/* Read motherboard POS registers */
-
-	mca_dev->pos_register = 0x7f;
-	outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
-	mca_dev->name[0] = 0;
-	mca_read_and_store_pos(mca_dev->pos);
-	mca_configure_adapter_status(mca_dev);
-	/* fake POS and slot for a motherboard */
-	mca_dev->pos_id = MCA_MOTHERBOARD_POS;
-	mca_dev->slot = MCA_MOTHERBOARD;
-	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
-
-	mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
-	if (unlikely(!mca_dev))
-		goto out_unlock_nomem;
-
-	/* Put motherboard into video setup mode, read integrated video
-	 * POS registers, and turn motherboard setup off.
-	 */
-
-	mca_dev->pos_register = 0xdf;
-	outb_p(mca_dev->pos_register, MCA_MOTHERBOARD_SETUP_REG);
-	mca_dev->name[0] = 0;
-	mca_read_and_store_pos(mca_dev->pos);
-	mca_configure_adapter_status(mca_dev);
-	/* fake POS and slot for the integrated video */
-	mca_dev->pos_id = MCA_INTEGVIDEO_POS;
-	mca_dev->slot = MCA_INTEGVIDEO;
-	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
-
-	/*
-	 * Put motherboard into scsi setup mode, read integrated scsi
-	 * POS registers, and turn motherboard setup off.
-	 *
-	 * It seems there are two possible SCSI registers. Martin says that
-	 * for the 56,57, 0xf7 is the one, but fails on the 76.
-	 * Alfredo (apena@vnet.ibm.com) says
-	 * 0xfd works on his machine. We'll try both of them. I figure it's
-	 * a good bet that only one could be valid at a time. This could
-	 * screw up though if one is used for something else on the other
-	 * machine.
-	 */
-
-	for (i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
-		outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG);
-		if (mca_read_and_store_pos(pos))
-			break;
-	}
-	if (which_scsi) {
-		/* found a scsi card */
-		mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
-		if (unlikely(!mca_dev))
-			goto out_unlock_nomem;
-
-		for (j = 0; j < 8; j++)
-			mca_dev->pos[j] = pos[j];
-
-		mca_configure_adapter_status(mca_dev);
-		/* fake POS and slot for integrated SCSI controller */
-		mca_dev->pos_id = MCA_INTEGSCSI_POS;
-		mca_dev->slot = MCA_INTEGSCSI;
-		mca_dev->pos_register = which_scsi;
-		mca_register_device(MCA_PRIMARY_BUS, mca_dev);
-	}
-
-	/* Turn off motherboard setup */
-
-	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
-
-	/*
-	 * Now loop over MCA slots: put each adapter into setup mode, and
-	 * read its POS registers. Then put adapter setup off.
-	 */
-
-	for (i = 0; i < MCA_MAX_SLOT_NR; i++) {
-		outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG);
-		if (!mca_read_and_store_pos(pos))
-			continue;
-
-		mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
-		if (unlikely(!mca_dev))
-			goto out_unlock_nomem;
-
-		for (j = 0; j < 8; j++)
-			mca_dev->pos[j] = pos[j];
-
-		mca_dev->driver_loaded = 0;
-		mca_dev->slot = i;
-		mca_dev->pos_register = 0;
-		mca_configure_adapter_status(mca_dev);
-		mca_register_device(MCA_PRIMARY_BUS, mca_dev);
-	}
-	outb_p(0, MCA_ADAPTER_SETUP_REG);
-
-	/* Enable interrupts and return memory start */
-	spin_unlock_irq(&mca_lock);
-
-	for (i = 0; i < MCA_STANDARD_RESOURCES; i++)
-		request_resource(&ioport_resource, mca_standard_resources + i);
-
-	mca_do_proc_init();
-
-	return 0;
-
- out_unlock_nomem:
-	spin_unlock_irq(&mca_lock);
- out_nomem:
-	printk(KERN_EMERG "Failed memory allocation in MCA setup!\n");
-	return -ENOMEM;
-}
-
-subsys_initcall(mca_init);
-
-/*--------------------------------------------------------------------*/
-
-static __kprobes void
-mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag)
-{
-	int slot = mca_dev->slot;
-
-	if (slot == MCA_INTEGSCSI) {
-		printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n",
-			mca_dev->name);
-	} else if (slot == MCA_INTEGVIDEO) {
-		printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n",
-			mca_dev->name);
-	} else if (slot == MCA_MOTHERBOARD) {
-		printk(KERN_CRIT "NMI: caused by motherboard (%s)\n",
-			mca_dev->name);
-	}
-
-	/* More info available in POS 6 and 7? */
-
-	if (check_flag) {
-		unsigned char pos6, pos7;
-
-		pos6 = mca_device_read_pos(mca_dev, 6);
-		pos7 = mca_device_read_pos(mca_dev, 7);
-
-		printk(KERN_CRIT "NMI: POS 6 = 0x%x, POS 7 = 0x%x\n", pos6, pos7);
-	}
-
-} /* mca_handle_nmi_slot */
-
-/*--------------------------------------------------------------------*/
-
-static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data)
-{
-	struct mca_device *mca_dev = to_mca_device(dev);
-	unsigned char pos5;
-
-	pos5 = mca_device_read_pos(mca_dev, 5);
-
-	if (!(pos5 & 0x80)) {
-		/*
-		 *  Bit 7 of POS 5 is reset when this adapter has a hardware
-		 * error. Bit 7 it reset if there's error information
-		 * available in POS 6 and 7.
-		 */
-		mca_handle_nmi_device(mca_dev, !(pos5 & 0x40));
-		return 1;
-	}
-	return 0;
-}
-
-void __kprobes mca_handle_nmi(void)
-{
-	/*
-	 *  First try - scan the various adapters and see if a specific
-	 * adapter was responsible for the error.
-	 */
-	bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback);
-}
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 73465aa..8a2ce8f 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -82,11 +82,6 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
 {
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
-		pr_warning("CPU%d: family %d not supported\n", cpu, c->x86);
-		return -1;
-	}
-
 	csig->rev = c->microcode;
 	pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev);
 
@@ -380,6 +375,13 @@ static struct microcode_ops microcode_amd_ops = {
 
 struct microcode_ops * __init init_amd_microcode(void)
 {
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
+		pr_warning("AMD CPU family 0x%x not supported\n", c->x86);
+		return NULL;
+	}
+
 	patch = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!patch)
 		return NULL;
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index 87a0f86..fbdfc69 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -299,12 +299,11 @@ static ssize_t reload_store(struct device *dev,
 {
 	unsigned long val;
 	int cpu = dev->id;
-	int ret = 0;
-	char *end;
+	ssize_t ret = 0;
 
-	val = simple_strtoul(buf, &end, 0);
-	if (end == buf)
-		return -EINVAL;
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
 
 	if (val == 1) {
 		get_online_cpus();
@@ -419,10 +418,8 @@ static int mc_device_add(struct device *dev, struct subsys_interface *sif)
 	if (err)
 		return err;
 
-	if (microcode_init_cpu(cpu) == UCODE_ERROR) {
-		sysfs_remove_group(&dev->kobj, &mc_attr_group);
+	if (microcode_init_cpu(cpu) == UCODE_ERROR)
 		return -EINVAL;
-	}
 
 	return err;
 }
@@ -528,11 +525,11 @@ static int __init microcode_init(void)
 		microcode_ops = init_intel_microcode();
 	else if (c->x86_vendor == X86_VENDOR_AMD)
 		microcode_ops = init_amd_microcode();
-
-	if (!microcode_ops) {
+	else
 		pr_err("no support for this CPU vendor\n");
+
+	if (!microcode_ops)
 		return -ENODEV;
-	}
 
 	microcode_pdev = platform_device_register_simple("microcode", -1,
 							 NULL, 0);
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index 3ca42d0..0327e2b 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -147,12 +147,6 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
 
 	memset(csig, 0, sizeof(*csig));
 
-	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
-	    cpu_has(c, X86_FEATURE_IA64)) {
-		pr_err("CPU%d not a capable Intel processor\n", cpu_num);
-		return -1;
-	}
-
 	csig->sig = cpuid_eax(0x00000001);
 
 	if ((c->x86_model >= 5) || (c->x86 > 6)) {
@@ -463,6 +457,14 @@ static struct microcode_ops microcode_intel_ops = {
 
 struct microcode_ops * __init init_intel_microcode(void)
 {
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
+	    cpu_has(c, X86_FEATURE_IA64)) {
+		pr_err("Intel CPU family 0x%x not supported\n", c->x86);
+		return NULL;
+	}
+
 	return &microcode_intel_ops;
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index ca470e4..d2b5648 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -27,7 +27,6 @@
 #include <asm/proto.h>
 #include <asm/bios_ebda.h>
 #include <asm/e820.h>
-#include <asm/trampoline.h>
 #include <asm/setup.h>
 #include <asm/smp.h>
 
@@ -97,7 +96,7 @@ static void __init MP_bus_info(struct mpc_bus *m)
 
 	set_bit(m->busid, mp_bus_not_pci);
 	if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
 		mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
 #endif
 	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
@@ -105,12 +104,10 @@ static void __init MP_bus_info(struct mpc_bus *m)
 			x86_init.mpparse.mpc_oem_pci_bus(m);
 
 		clear_bit(m->busid, mp_bus_not_pci);
-#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+#ifdef CONFIG_EISA
 		mp_bus_id_to_type[m->busid] = MP_BUS_PCI;
 	} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
 		mp_bus_id_to_type[m->busid] = MP_BUS_EISA;
-	} else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) {
-		mp_bus_id_to_type[m->busid] = MP_BUS_MCA;
 #endif
 	} else
 		printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
@@ -368,9 +365,6 @@ static void __init construct_ioapic_table(int mpc_default_type)
 	case 3:
 		memcpy(bus.bustype, "EISA  ", 6);
 		break;
-	case 4:
-	case 7:
-		memcpy(bus.bustype, "MCA   ", 6);
 	}
 	MP_bus_info(&bus);
 	if (mpc_default_type > 4) {
@@ -573,8 +567,8 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)
 	struct mpf_intel *mpf;
 	unsigned long mem;
 
-	apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n",
-			bp, length);
+	apic_printk(APIC_VERBOSE, "Scan for SMP in [mem %#010lx-%#010lx]\n",
+		    base, base + length - 1);
 	BUILD_BUG_ON(sizeof(*mpf) != 16);
 
 	while (length > 0) {
@@ -589,8 +583,10 @@ static int __init smp_scan_config(unsigned long base, unsigned long length)
 #endif
 			mpf_found = mpf;
 
-			printk(KERN_INFO "found SMP MP-table at [%p] %llx\n",
-			       mpf, (u64)virt_to_phys(mpf));
+			printk(KERN_INFO "found SMP MP-table at [mem %#010llx-%#010llx] mapped at [%p]\n",
+			       (unsigned long long) virt_to_phys(mpf),
+			       (unsigned long long) virt_to_phys(mpf) +
+			       sizeof(*mpf) - 1, mpf);
 
 			mem = virt_to_phys(mpf);
 			memblock_reserve(mem, sizeof(*mpf));
@@ -623,7 +619,7 @@ void __init default_find_smp_config(void)
 		return;
 	/*
 	 * If it is an SMP machine we should know now, unless the
-	 * configuration is in an EISA/MCA bus machine with an
+	 * configuration is in an EISA bus machine with an
 	 * extended bios data area.
 	 *
 	 * there is a real-mode segmented pointer pointing to the
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 47acaf3..a0b2f84 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -19,8 +19,6 @@
 #include <linux/slab.h>
 #include <linux/export.h>
 
-#include <linux/mca.h>
-
 #if defined(CONFIG_EDAC)
 #include <linux/edac.h>
 #endif
@@ -31,14 +29,6 @@
 #include <asm/nmi.h>
 #include <asm/x86_init.h>
 
-#define NMI_MAX_NAMELEN	16
-struct nmiaction {
-	struct list_head list;
-	nmi_handler_t handler;
-	unsigned int flags;
-	char *name;
-};
-
 struct nmi_desc {
 	spinlock_t lock;
 	struct list_head head;
@@ -54,6 +44,14 @@ static struct nmi_desc nmi_desc[NMI_MAX] =
 		.lock = __SPIN_LOCK_UNLOCKED(&nmi_desc[1].lock),
 		.head = LIST_HEAD_INIT(nmi_desc[1].head),
 	},
+	{
+		.lock = __SPIN_LOCK_UNLOCKED(&nmi_desc[2].lock),
+		.head = LIST_HEAD_INIT(nmi_desc[2].head),
+	},
+	{
+		.lock = __SPIN_LOCK_UNLOCKED(&nmi_desc[3].lock),
+		.head = LIST_HEAD_INIT(nmi_desc[3].head),
+	},
 
 };
 
@@ -84,7 +82,7 @@ __setup("unknown_nmi_panic", setup_unknown_nmi_panic);
 
 #define nmi_to_desc(type) (&nmi_desc[type])
 
-static int notrace __kprobes nmi_handle(unsigned int type, struct pt_regs *regs, bool b2b)
+static int __kprobes nmi_handle(unsigned int type, struct pt_regs *regs, bool b2b)
 {
 	struct nmi_desc *desc = nmi_to_desc(type);
 	struct nmiaction *a;
@@ -107,11 +105,14 @@ static int notrace __kprobes nmi_handle(unsigned int type, struct pt_regs *regs,
 	return handled;
 }
 
-static int __setup_nmi(unsigned int type, struct nmiaction *action)
+int __register_nmi_handler(unsigned int type, struct nmiaction *action)
 {
 	struct nmi_desc *desc = nmi_to_desc(type);
 	unsigned long flags;
 
+	if (!action->handler)
+		return -EINVAL;
+
 	spin_lock_irqsave(&desc->lock, flags);
 
 	/*
@@ -120,6 +121,8 @@ static int __setup_nmi(unsigned int type, struct nmiaction *action)
 	 * to manage expectations
 	 */
 	WARN_ON_ONCE(type == NMI_UNKNOWN && !list_empty(&desc->head));
+	WARN_ON_ONCE(type == NMI_SERR && !list_empty(&desc->head));
+	WARN_ON_ONCE(type == NMI_IO_CHECK && !list_empty(&desc->head));
 
 	/*
 	 * some handlers need to be executed first otherwise a fake
@@ -133,8 +136,9 @@ static int __setup_nmi(unsigned int type, struct nmiaction *action)
 	spin_unlock_irqrestore(&desc->lock, flags);
 	return 0;
 }
+EXPORT_SYMBOL(__register_nmi_handler);
 
-static struct nmiaction *__free_nmi(unsigned int type, const char *name)
+void unregister_nmi_handler(unsigned int type, const char *name)
 {
 	struct nmi_desc *desc = nmi_to_desc(type);
 	struct nmiaction *n;
@@ -157,61 +161,16 @@ static struct nmiaction *__free_nmi(unsigned int type, const char *name)
 
 	spin_unlock_irqrestore(&desc->lock, flags);
 	synchronize_rcu();
-	return (n);
-}
-
-int register_nmi_handler(unsigned int type, nmi_handler_t handler,
-			unsigned long nmiflags, const char *devname)
-{
-	struct nmiaction *action;
-	int retval = -ENOMEM;
-
-	if (!handler)
-		return -EINVAL;
-
-	action = kzalloc(sizeof(struct nmiaction), GFP_KERNEL);
-	if (!action)
-		goto fail_action;
-
-	action->handler = handler;
-	action->flags = nmiflags;
-	action->name = kstrndup(devname, NMI_MAX_NAMELEN, GFP_KERNEL);
-	if (!action->name)
-		goto fail_action_name;
-
-	retval = __setup_nmi(type, action);
-
-	if (retval)
-		goto fail_setup_nmi;
-
-	return retval;
-
-fail_setup_nmi:
-	kfree(action->name);
-fail_action_name:
-	kfree(action);
-fail_action:	
-
-	return retval;
-}
-EXPORT_SYMBOL_GPL(register_nmi_handler);
-
-void unregister_nmi_handler(unsigned int type, const char *name)
-{
-	struct nmiaction *a;
-
-	a = __free_nmi(type, name);
-	if (a) {
-		kfree(a->name);
-		kfree(a);
-	}
 }
-
 EXPORT_SYMBOL_GPL(unregister_nmi_handler);
 
-static notrace __kprobes void
+static __kprobes void
 pci_serr_error(unsigned char reason, struct pt_regs *regs)
 {
+	/* check to see if anyone registered against these types of errors */
+	if (nmi_handle(NMI_SERR, regs, false))
+		return;
+
 	pr_emerg("NMI: PCI system error (SERR) for reason %02x on CPU %d.\n",
 		 reason, smp_processor_id());
 
@@ -236,15 +195,19 @@ pci_serr_error(unsigned char reason, struct pt_regs *regs)
 	outb(reason, NMI_REASON_PORT);
 }
 
-static notrace __kprobes void
+static __kprobes void
 io_check_error(unsigned char reason, struct pt_regs *regs)
 {
 	unsigned long i;
 
+	/* check to see if anyone registered against these types of errors */
+	if (nmi_handle(NMI_IO_CHECK, regs, false))
+		return;
+
 	pr_emerg(
 	"NMI: IOCK error (debug interrupt?) for reason %02x on CPU %d.\n",
 		 reason, smp_processor_id());
-	show_registers(regs);
+	show_regs(regs);
 
 	if (panic_on_io_nmi)
 		panic("NMI IOCK error: Not continuing");
@@ -263,7 +226,7 @@ io_check_error(unsigned char reason, struct pt_regs *regs)
 	outb(reason, NMI_REASON_PORT);
 }
 
-static notrace __kprobes void
+static __kprobes void
 unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
 {
 	int handled;
@@ -282,16 +245,6 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
 
 	__this_cpu_add(nmi_stats.unknown, 1);
 
-#ifdef CONFIG_MCA
-	/*
-	 * Might actually be able to figure out what the guilty party
-	 * is:
-	 */
-	if (MCA_bus) {
-		mca_handle_nmi();
-		return;
-	}
-#endif
 	pr_emerg("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
 		 reason, smp_processor_id());
 
@@ -305,7 +258,7 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
 static DEFINE_PER_CPU(bool, swallow_nmi);
 static DEFINE_PER_CPU(unsigned long, last_nmi_rip);
 
-static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
+static __kprobes void default_do_nmi(struct pt_regs *regs)
 {
 	unsigned char reason = 0;
 	int handled;
@@ -491,14 +444,16 @@ static inline void nmi_nesting_preprocess(struct pt_regs *regs)
 	 */
 	if (unlikely(is_debug_stack(regs->sp))) {
 		debug_stack_set_zero();
-		__get_cpu_var(update_debug_stack) = 1;
+		this_cpu_write(update_debug_stack, 1);
 	}
 }
 
 static inline void nmi_nesting_postprocess(void)
 {
-	if (unlikely(__get_cpu_var(update_debug_stack)))
+	if (unlikely(this_cpu_read(update_debug_stack))) {
 		debug_stack_reset();
+		this_cpu_write(update_debug_stack, 0);
+	}
 }
 #endif
 
diff --git a/arch/x86/kernel/nmi_selftest.c b/arch/x86/kernel/nmi_selftest.c
index 2c39dcd..149b8d9 100644
--- a/arch/x86/kernel/nmi_selftest.c
+++ b/arch/x86/kernel/nmi_selftest.c
@@ -13,6 +13,7 @@
 #include <linux/cpumask.h>
 #include <linux/delay.h>
 #include <linux/init.h>
+#include <linux/percpu.h>
 
 #include <asm/apic.h>
 #include <asm/nmi.h>
@@ -41,7 +42,7 @@ static int __init nmi_unk_cb(unsigned int val, struct pt_regs *regs)
 static void __init init_nmi_testsuite(void)
 {
 	/* trap all the unknown NMIs we may generate */
-	register_nmi_handler(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk");
+	register_nmi_handler_initonly(NMI_UNKNOWN, nmi_unk_cb, 0, "nmi_selftest_unk");
 }
 
 static void __init cleanup_nmi_testsuite(void)
@@ -63,7 +64,7 @@ static void __init test_nmi_ipi(struct cpumask *mask)
 {
 	unsigned long timeout;
 
-	if (register_nmi_handler(NMI_LOCAL, test_nmi_ipi_callback,
+	if (register_nmi_handler_initonly(NMI_LOCAL, test_nmi_ipi_callback,
 				 NMI_FLAG_FIRST, "nmi_selftest")) {
 		nmi_fail = FAILURE;
 		return;
@@ -117,15 +118,15 @@ static void __init dotest(void (*testcase_fn)(void), int expected)
 		unexpected_testcase_failures++;
 
 		if (nmi_fail == FAILURE)
-			printk("FAILED |");
+			printk(KERN_CONT "FAILED |");
 		else if (nmi_fail == TIMEOUT)
-			printk("TIMEOUT|");
+			printk(KERN_CONT "TIMEOUT|");
 		else
-			printk("ERROR  |");
+			printk(KERN_CONT "ERROR  |");
 		dump_stack();
 	} else {
 		testcase_successes++;
-		printk("  ok  |");
+		printk(KERN_CONT "  ok  |");
 	}
 	testcase_total++;
 
@@ -150,10 +151,10 @@ void __init nmi_selftest(void)
 
 	print_testname("remote IPI");
 	dotest(remote_ipi, SUCCESS);
-	printk("\n");
+	printk(KERN_CONT "\n");
 	print_testname("local IPI");
 	dotest(local_ipi, SUCCESS);
-	printk("\n");
+	printk(KERN_CONT "\n");
 
 	cleanup_nmi_testsuite();
 
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index ab13760..9ce8859 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -241,16 +241,16 @@ static DEFINE_PER_CPU(enum paravirt_lazy_mode, paravirt_lazy_mode) = PARAVIRT_LA
 
 static inline void enter_lazy(enum paravirt_lazy_mode mode)
 {
-	BUG_ON(percpu_read(paravirt_lazy_mode) != PARAVIRT_LAZY_NONE);
+	BUG_ON(this_cpu_read(paravirt_lazy_mode) != PARAVIRT_LAZY_NONE);
 
-	percpu_write(paravirt_lazy_mode, mode);
+	this_cpu_write(paravirt_lazy_mode, mode);
 }
 
 static void leave_lazy(enum paravirt_lazy_mode mode)
 {
-	BUG_ON(percpu_read(paravirt_lazy_mode) != mode);
+	BUG_ON(this_cpu_read(paravirt_lazy_mode) != mode);
 
-	percpu_write(paravirt_lazy_mode, PARAVIRT_LAZY_NONE);
+	this_cpu_write(paravirt_lazy_mode, PARAVIRT_LAZY_NONE);
 }
 
 void paravirt_enter_lazy_mmu(void)
@@ -267,7 +267,7 @@ void paravirt_start_context_switch(struct task_struct *prev)
 {
 	BUG_ON(preemptible());
 
-	if (percpu_read(paravirt_lazy_mode) == PARAVIRT_LAZY_MMU) {
+	if (this_cpu_read(paravirt_lazy_mode) == PARAVIRT_LAZY_MMU) {
 		arch_leave_lazy_mmu_mode();
 		set_ti_thread_flag(task_thread_info(prev), TIF_LAZY_MMU_UPDATES);
 	}
@@ -289,7 +289,7 @@ enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
 	if (in_interrupt())
 		return PARAVIRT_LAZY_NONE;
 
-	return percpu_read(paravirt_lazy_mode);
+	return this_cpu_read(paravirt_lazy_mode);
 }
 
 void arch_flush_lazy_mmu_mode(void)
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index d0b2fb9..b72838b 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -1480,8 +1480,9 @@ cleanup:
 static int __init calgary_parse_options(char *p)
 {
 	unsigned int bridge;
+	unsigned long val;
 	size_t len;
-	char* endp;
+	ssize_t ret;
 
 	while (*p) {
 		if (!strncmp(p, "64k", 3))
@@ -1512,10 +1513,11 @@ static int __init calgary_parse_options(char *p)
 				++p;
 			if (*p == '\0')
 				break;
-			bridge = simple_strtoul(p, &endp, 0);
-			if (p == endp)
+			ret = kstrtoul(p, 0, &val);
+			if (ret)
 				break;
 
+			bridge = val;
 			if (bridge < MAX_PHB_BUS_NUM) {
 				printk(KERN_INFO "Calgary: disabling "
 				       "translation for PHB %#x\n", bridge);
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 3003250..62c9457 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -100,14 +100,18 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 				 struct dma_attrs *attrs)
 {
 	unsigned long dma_mask;
-	struct page *page;
+	struct page *page = NULL;
+	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	dma_addr_t addr;
 
 	dma_mask = dma_alloc_coherent_mask(dev, flag);
 
 	flag |= __GFP_ZERO;
 again:
-	page = alloc_pages_node(dev_to_node(dev), flag, get_order(size));
+	if (!(flag & GFP_ATOMIC))
+		page = dma_alloc_from_contiguous(dev, count, get_order(size));
+	if (!page)
+		page = alloc_pages_node(dev_to_node(dev), flag, get_order(size));
 	if (!page)
 		return NULL;
 
@@ -127,6 +131,16 @@ again:
 	return page_address(page);
 }
 
+void dma_generic_free_coherent(struct device *dev, size_t size, void *vaddr,
+			       dma_addr_t dma_addr, struct dma_attrs *attrs)
+{
+	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+	struct page *page = virt_to_page(vaddr);
+
+	if (!dma_release_from_contiguous(dev, page, count))
+		free_pages((unsigned long)vaddr, get_order(size));
+}
+
 /*
  * See <Documentation/x86/x86_64/boot-options.txt> for the iommu kernel
  * parameter documentation.
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index f960506..871be4a 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -74,12 +74,6 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg,
 	return nents;
 }
 
-static void nommu_free_coherent(struct device *dev, size_t size, void *vaddr,
-				dma_addr_t dma_addr, struct dma_attrs *attrs)
-{
-	free_pages((unsigned long)vaddr, get_order(size));
-}
-
 static void nommu_sync_single_for_device(struct device *dev,
 			dma_addr_t addr, size_t size,
 			enum dma_data_direction dir)
@@ -97,7 +91,7 @@ static void nommu_sync_sg_for_device(struct device *dev,
 
 struct dma_map_ops nommu_dma_ops = {
 	.alloc			= dma_generic_alloc_coherent,
-	.free			= nommu_free_coherent,
+	.free			= dma_generic_free_coherent,
 	.map_sg			= nommu_map_sg,
 	.map_page		= nommu_map_page,
 	.sync_single_for_device = nommu_sync_single_for_device,
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 1d92a5a..735279e 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -27,6 +27,15 @@
 #include <asm/debugreg.h>
 #include <asm/nmi.h>
 
+/*
+ * per-CPU TSS segments. Threads are completely 'soft' on Linux,
+ * no more per-task TSS's. The TSS size is kept cacheline-aligned
+ * so they are allowed to end up in the .data..cacheline_aligned
+ * section. Since TSS's are completely CPU-local, we want them
+ * on exact cacheline boundaries, to eliminate cacheline ping-pong.
+ */
+DEFINE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss) = INIT_TSS;
+
 #ifdef CONFIG_X86_64
 static DEFINE_PER_CPU(unsigned char, is_idle);
 static ATOMIC_NOTIFIER_HEAD(idle_notifier);
@@ -47,10 +56,16 @@ EXPORT_SYMBOL_GPL(idle_notifier_unregister);
 struct kmem_cache *task_xstate_cachep;
 EXPORT_SYMBOL_GPL(task_xstate_cachep);
 
+/*
+ * this gets called so that we can store lazy state into memory and copy the
+ * current task into the new thread.
+ */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
 	int ret;
 
+	unlazy_fpu(src);
+
 	*dst = *src;
 	if (fpu_allocated(&src->thread.fpu)) {
 		memset(&dst->thread.fpu, 0, sizeof(dst->thread.fpu));
@@ -67,10 +82,9 @@ void free_thread_xstate(struct task_struct *tsk)
 	fpu_free(&tsk->thread.fpu);
 }
 
-void free_thread_info(struct thread_info *ti)
+void arch_release_task_struct(struct task_struct *tsk)
 {
-	free_thread_xstate(ti->task);
-	free_pages((unsigned long)ti, THREAD_ORDER);
+	free_thread_xstate(tsk);
 }
 
 void arch_task_cache_init(void)
@@ -81,6 +95,16 @@ void arch_task_cache_init(void)
 				  SLAB_PANIC | SLAB_NOTRACK, NULL);
 }
 
+static inline void drop_fpu(struct task_struct *tsk)
+{
+	/*
+	 * Forget coprocessor state..
+	 */
+	tsk->fpu_counter = 0;
+	clear_fpu(tsk);
+	clear_used_math();
+}
+
 /*
  * Free current thread data structures etc..
  */
@@ -103,12 +127,8 @@ void exit_thread(void)
 		put_cpu();
 		kfree(bp);
 	}
-}
 
-void show_regs(struct pt_regs *regs)
-{
-	show_registers(regs);
-	show_trace(NULL, regs, (unsigned long *)kernel_stack_pointer(regs), 0);
+	drop_fpu(me);
 }
 
 void show_regs_common(void)
@@ -143,12 +163,7 @@ void flush_thread(void)
 
 	flush_ptrace_hw_breakpoint(tsk);
 	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
-	/*
-	 * Forget coprocessor state..
-	 */
-	tsk->fpu_counter = 0;
-	clear_fpu(tsk);
-	clear_used_math();
+	drop_fpu(tsk);
 }
 
 static void hard_disable_TSC(void)
@@ -377,7 +392,7 @@ static inline void play_dead(void)
 #ifdef CONFIG_X86_64
 void enter_idle(void)
 {
-	percpu_write(is_idle, 1);
+	this_cpu_write(is_idle, 1);
 	atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL);
 }
 
@@ -516,26 +531,6 @@ void stop_this_cpu(void *dummy)
 	}
 }
 
-static void do_nothing(void *unused)
-{
-}
-
-/*
- * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
- * pm_idle and update to new pm_idle value. Required while changing pm_idle
- * handler on SMP systems.
- *
- * Caller must have changed pm_idle to the new value before the call. Old
- * pm_idle value will not be used by any CPU after the return of this function.
- */
-void cpu_idle_wait(void)
-{
-	smp_mb();
-	/* kick all the CPUs so that they exit out of pm_idle */
-	smp_call_function(do_nothing, NULL, 1);
-}
-EXPORT_SYMBOL_GPL(cpu_idle_wait);
-
 /* Default MONITOR/MWAIT with no hints, used for default C1 state */
 static void mwait_idle(void)
 {
@@ -594,9 +589,17 @@ int mwait_usable(const struct cpuinfo_x86 *c)
 {
 	u32 eax, ebx, ecx, edx;
 
+	/* Use mwait if idle=mwait boot option is given */
 	if (boot_option_idle_override == IDLE_FORCE_MWAIT)
 		return 1;
 
+	/*
+	 * Any idle= boot option other than idle=mwait means that we must not
+	 * use mwait. Eg: idle=halt or idle=poll or idle=nomwait
+	 */
+	if (boot_option_idle_override != IDLE_NO_OVERRIDE)
+		return 0;
+
 	if (c->cpuid_level < MWAIT_INFO)
 		return 0;
 
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index ae68473..516fa18 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -126,15 +126,6 @@ void release_thread(struct task_struct *dead_task)
 	release_vm86_irqs(dead_task);
 }
 
-/*
- * This gets called before we allocate a new thread and copy
- * the current task into it.
- */
-void prepare_to_copy(struct task_struct *tsk)
-{
-	unlazy_fpu(tsk);
-}
-
 int copy_thread(unsigned long clone_flags, unsigned long sp,
 	unsigned long unused,
 	struct task_struct *p, struct pt_regs *regs)
@@ -302,7 +293,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	switch_fpu_finish(next_p, fpu);
 
-	percpu_write(current_task, next_p);
+	this_cpu_write(current_task, next_p);
 
 	return prev_p;
 }
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 733ca39..61cdf7f 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -145,15 +145,6 @@ static inline u32 read_32bit_tls(struct task_struct *t, int tls)
 	return get_desc_base(&t->thread.tls_array[tls]);
 }
 
-/*
- * This gets called before we allocate a new thread and copy
- * the current task into it.
- */
-void prepare_to_copy(struct task_struct *tsk)
-{
-	unlazy_fpu(tsk);
-}
-
 int copy_thread(unsigned long clone_flags, unsigned long sp,
 		unsigned long unused,
 	struct task_struct *p, struct pt_regs *regs)
@@ -237,7 +228,7 @@ start_thread_common(struct pt_regs *regs, unsigned long new_ip,
 	current->thread.usersp	= new_sp;
 	regs->ip		= new_ip;
 	regs->sp		= new_sp;
-	percpu_write(old_rsp, new_sp);
+	this_cpu_write(old_rsp, new_sp);
 	regs->cs		= _cs;
 	regs->ss		= _ss;
 	regs->flags		= X86_EFLAGS_IF;
@@ -359,11 +350,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	/*
 	 * Switch the PDA and FPU contexts.
 	 */
-	prev->usersp = percpu_read(old_rsp);
-	percpu_write(old_rsp, next->usersp);
-	percpu_write(current_task, next_p);
+	prev->usersp = this_cpu_read(old_rsp);
+	this_cpu_write(old_rsp, next->usersp);
+	this_cpu_write(current_task, next_p);
 
-	percpu_write(kernel_stack,
+	this_cpu_write(kernel_stack,
 		  (unsigned long)task_stack_page(next_p) +
 		  THREAD_SIZE - KERNEL_STACK_OFFSET);
 
@@ -423,6 +414,7 @@ void set_personality_ia32(bool x32)
 		current_thread_info()->status |= TS_COMPAT;
 	}
 }
+EXPORT_SYMBOL_GPL(set_personality_ia32);
 
 unsigned long get_wchan(struct task_struct *p)
 {
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 685845c..c4c6a5c 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1211,12 +1211,6 @@ static long x32_arch_ptrace(struct task_struct *child,
 					     0, sizeof(struct user_i387_struct),
 					     datap);
 
-		/* normal 64bit interface to access TLS data.
-		   Works just like arch_prctl, except that the arguments
-		   are reversed. */
-	case PTRACE_ARCH_PRCTL:
-		return do_arch_prctl(child, data, addr);
-
 	default:
 		return compat_ptrace_request(child, request, addr, data);
 	}
@@ -1480,7 +1474,11 @@ long syscall_trace_enter(struct pt_regs *regs)
 		regs->flags |= X86_EFLAGS_TF;
 
 	/* do the secure computing check first */
-	secure_computing(regs->orig_ax);
+	if (secure_computing(regs->orig_ax)) {
+		/* seccomp failures shouldn't expose any additional code. */
+		ret = -1L;
+		goto out;
+	}
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_EMU)))
 		ret = -1L;
@@ -1505,6 +1503,7 @@ long syscall_trace_enter(struct pt_regs *regs)
 				    regs->dx, regs->r10);
 #endif
 
+out:
 	return ret ?: regs->orig_ax;
 }
 
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d840e69..25b48ed 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -24,6 +24,7 @@
 #ifdef CONFIG_X86_32
 # include <linux/ctype.h>
 # include <linux/mc146818rtc.h>
+# include <asm/realmode.h>
 #else
 # include <asm/x86_init.h>
 #endif
@@ -39,7 +40,8 @@ static int reboot_mode;
 enum reboot_type reboot_type = BOOT_ACPI;
 int reboot_force;
 
-/* This variable is used privately to keep track of whether or not
+/*
+ * This variable is used privately to keep track of whether or not
  * reboot_type is still set to its default value (i.e., reboot= hasn't
  * been set on the command line).  This is needed so that we can
  * suppress DMI scanning for reboot quirks.  Without it, it's
@@ -51,7 +53,8 @@ static int reboot_default = 1;
 static int reboot_cpu = -1;
 #endif
 
-/* This is set if we need to go through the 'emergency' path.
+/*
+ * This is set if we need to go through the 'emergency' path.
  * When machine_emergency_restart() is called, we may be on
  * an inconsistent state and won't be able to do a clean cleanup
  */
@@ -60,22 +63,24 @@ static int reboot_emergency;
 /* This is set by the PCI code if either type 1 or type 2 PCI is detected */
 bool port_cf9_safe = false;
 
-/* reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]
-   warm   Don't set the cold reboot flag
-   cold   Set the cold reboot flag
-   bios   Reboot by jumping through the BIOS (only for X86_32)
-   smp    Reboot by executing reset on BSP or other CPU (only for X86_32)
-   triple Force a triple fault (init)
-   kbd    Use the keyboard controller. cold reset (default)
-   acpi   Use the RESET_REG in the FADT
-   efi    Use efi reset_system runtime service
-   pci    Use the so-called "PCI reset register", CF9
-   force  Avoid anything that could hang.
+/*
+ * reboot=b[ios] | s[mp] | t[riple] | k[bd] | e[fi] [, [w]arm | [c]old] | p[ci]
+ * warm   Don't set the cold reboot flag
+ * cold   Set the cold reboot flag
+ * bios   Reboot by jumping through the BIOS (only for X86_32)
+ * smp    Reboot by executing reset on BSP or other CPU (only for X86_32)
+ * triple Force a triple fault (init)
+ * kbd    Use the keyboard controller. cold reset (default)
+ * acpi   Use the RESET_REG in the FADT
+ * efi    Use efi reset_system runtime service
+ * pci    Use the so-called "PCI reset register", CF9
+ * force  Avoid anything that could hang.
  */
 static int __init reboot_setup(char *str)
 {
 	for (;;) {
-		/* Having anything passed on the command line via
+		/*
+		 * Having anything passed on the command line via
 		 * reboot= will cause us to disable DMI checking
 		 * below.
 		 */
@@ -98,9 +103,11 @@ static int __init reboot_setup(char *str)
 				if (isdigit(*(str+2)))
 					reboot_cpu = reboot_cpu*10 + (int)(*(str+2) - '0');
 			}
-				/* we will leave sorting out the final value
-				   when we are ready to reboot, since we might not
-				   have detected BSP APIC ID or smp_num_cpu */
+			/*
+			 * We will leave sorting out the final value
+			 * when we are ready to reboot, since we might not
+			 * have detected BSP APIC ID or smp_num_cpu
+			 */
 			break;
 #endif /* CONFIG_SMP */
 
@@ -150,6 +157,62 @@ static int __init set_bios_reboot(const struct dmi_system_id *d)
 	return 0;
 }
 
+void machine_real_restart(unsigned int type)
+{
+	void (*restart_lowmem)(unsigned int) = (void (*)(unsigned int))
+		real_mode_header->machine_real_restart_asm;
+
+	local_irq_disable();
+
+	/*
+	 * Write zero to CMOS register number 0x0f, which the BIOS POST
+	 * routine will recognize as telling it to do a proper reboot.  (Well
+	 * that's what this book in front of me says -- it may only apply to
+	 * the Phoenix BIOS though, it's not clear).  At the same time,
+	 * disable NMIs by setting the top bit in the CMOS address register,
+	 * as we're about to do peculiar things to the CPU.  I'm not sure if
+	 * `outb_p' is needed instead of just `outb'.  Use it to be on the
+	 * safe side.  (Yes, CMOS_WRITE does outb_p's. -  Paul G.)
+	 */
+	spin_lock(&rtc_lock);
+	CMOS_WRITE(0x00, 0x8f);
+	spin_unlock(&rtc_lock);
+
+	/*
+	 * Switch back to the initial page table.
+	 */
+	load_cr3(initial_page_table);
+
+	/*
+	 * Write 0x1234 to absolute memory location 0x472.  The BIOS reads
+	 * this on booting to tell it to "Bypass memory test (also warm
+	 * boot)".  This seems like a fairly standard thing that gets set by
+	 * REBOOT.COM programs, and the previous reset routine did this
+	 * too. */
+	*((unsigned short *)0x472) = reboot_mode;
+
+	/* Jump to the identity-mapped low memory code */
+	restart_lowmem(type);
+}
+#ifdef CONFIG_APM_MODULE
+EXPORT_SYMBOL(machine_real_restart);
+#endif
+
+#endif /* CONFIG_X86_32 */
+
+/*
+ * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot
+ */
+static int __init set_pci_reboot(const struct dmi_system_id *d)
+{
+	if (reboot_type != BOOT_CF9) {
+		reboot_type = BOOT_CF9;
+		printk(KERN_INFO "%s series board detected. "
+		       "Selecting PCI-method for reboots.\n", d->ident);
+	}
+	return 0;
+}
+
 static int __init set_kbd_reboot(const struct dmi_system_id *d)
 {
 	if (reboot_type != BOOT_KBD) {
@@ -159,7 +222,12 @@ static int __init set_kbd_reboot(const struct dmi_system_id *d)
 	return 0;
 }
 
+/*
+ * This is a single dmi_table handling all reboot quirks.  Note that
+ * REBOOT_BIOS is only available for 32bit
+ */
 static struct dmi_system_id __initdata reboot_dmi_table[] = {
+#ifdef CONFIG_X86_32
 	{	/* Handle problems with rebooting on Dell E520's */
 		.callback = set_bios_reboot,
 		.ident = "Dell E520",
@@ -184,7 +252,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"),
 		},
 	},
-	{       /* Handle problems with rebooting on Dell Optiplex 745's SFF*/
+	{	/* Handle problems with rebooting on Dell Optiplex 745's SFF */
 		.callback = set_bios_reboot,
 		.ident = "Dell OptiPlex 745",
 		.matches = {
@@ -192,7 +260,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
 		},
 	},
-	{       /* Handle problems with rebooting on Dell Optiplex 745's DFF*/
+	{	/* Handle problems with rebooting on Dell Optiplex 745's DFF */
 		.callback = set_bios_reboot,
 		.ident = "Dell OptiPlex 745",
 		.matches = {
@@ -201,7 +269,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "0MM599"),
 		},
 	},
-	{       /* Handle problems with rebooting on Dell Optiplex 745 with 0KW626 */
+	{	/* Handle problems with rebooting on Dell Optiplex 745 with 0KW626 */
 		.callback = set_bios_reboot,
 		.ident = "Dell OptiPlex 745",
 		.matches = {
@@ -210,7 +278,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "0KW626"),
 		},
 	},
-	{   /* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */
+	{	/* Handle problems with rebooting on Dell Optiplex 330 with 0KP561 */
 		.callback = set_bios_reboot,
 		.ident = "Dell OptiPlex 330",
 		.matches = {
@@ -219,7 +287,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "0KP561"),
 		},
 	},
-	{   /* Handle problems with rebooting on Dell Optiplex 360 with 0T656F */
+	{	/* Handle problems with rebooting on Dell Optiplex 360 with 0T656F */
 		.callback = set_bios_reboot,
 		.ident = "Dell OptiPlex 360",
 		.matches = {
@@ -228,7 +296,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "0T656F"),
 		},
 	},
-	{	/* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G*/
+	{	/* Handle problems with rebooting on Dell OptiPlex 760 with 0G919G */
 		.callback = set_bios_reboot,
 		.ident = "Dell OptiPlex 760",
 		.matches = {
@@ -301,7 +369,7 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"),
 		},
 	},
-	{       /* Handle problems with rebooting on ASUS P4S800 */
+	{	/* Handle problems with rebooting on ASUS P4S800 */
 		.callback = set_bios_reboot,
 		.ident = "ASUS P4S800",
 		.matches = {
@@ -309,7 +377,9 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
 		},
 	},
-	{ /* Handle reboot issue on Acer Aspire one */
+#endif /* CONFIG_X86_32 */
+
+	{	/* Handle reboot issue on Acer Aspire one */
 		.callback = set_kbd_reboot,
 		.ident = "Acer Aspire One A110",
 		.matches = {
@@ -317,96 +387,6 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"),
 		},
 	},
-	{ }
-};
-
-static int __init reboot_init(void)
-{
-	/* Only do the DMI check if reboot_type hasn't been overridden
-	 * on the command line
-	 */
-	if (reboot_default) {
-		dmi_check_system(reboot_dmi_table);
-	}
-	return 0;
-}
-core_initcall(reboot_init);
-
-extern const unsigned char machine_real_restart_asm[];
-extern const u64 machine_real_restart_gdt[3];
-
-void machine_real_restart(unsigned int type)
-{
-	void *restart_va;
-	unsigned long restart_pa;
-	void (*restart_lowmem)(unsigned int);
-	u64 *lowmem_gdt;
-
-	local_irq_disable();
-
-	/* Write zero to CMOS register number 0x0f, which the BIOS POST
-	   routine will recognize as telling it to do a proper reboot.  (Well
-	   that's what this book in front of me says -- it may only apply to
-	   the Phoenix BIOS though, it's not clear).  At the same time,
-	   disable NMIs by setting the top bit in the CMOS address register,
-	   as we're about to do peculiar things to the CPU.  I'm not sure if
-	   `outb_p' is needed instead of just `outb'.  Use it to be on the
-	   safe side.  (Yes, CMOS_WRITE does outb_p's. -  Paul G.)
-	 */
-	spin_lock(&rtc_lock);
-	CMOS_WRITE(0x00, 0x8f);
-	spin_unlock(&rtc_lock);
-
-	/*
-	 * Switch back to the initial page table.
-	 */
-	load_cr3(initial_page_table);
-
-	/* Write 0x1234 to absolute memory location 0x472.  The BIOS reads
-	   this on booting to tell it to "Bypass memory test (also warm
-	   boot)".  This seems like a fairly standard thing that gets set by
-	   REBOOT.COM programs, and the previous reset routine did this
-	   too. */
-	*((unsigned short *)0x472) = reboot_mode;
-
-	/* Patch the GDT in the low memory trampoline */
-	lowmem_gdt = TRAMPOLINE_SYM(machine_real_restart_gdt);
-
-	restart_va = TRAMPOLINE_SYM(machine_real_restart_asm);
-	restart_pa = virt_to_phys(restart_va);
-	restart_lowmem = (void (*)(unsigned int))restart_pa;
-
-	/* GDT[0]: GDT self-pointer */
-	lowmem_gdt[0] =
-		(u64)(sizeof(machine_real_restart_gdt) - 1) +
-		((u64)virt_to_phys(lowmem_gdt) << 16);
-	/* GDT[1]: 64K real mode code segment */
-	lowmem_gdt[1] =
-		GDT_ENTRY(0x009b, restart_pa, 0xffff);
-
-	/* Jump to the identity-mapped low memory code */
-	restart_lowmem(type);
-}
-#ifdef CONFIG_APM_MODULE
-EXPORT_SYMBOL(machine_real_restart);
-#endif
-
-#endif /* CONFIG_X86_32 */
-
-/*
- * Some Apple MacBook and MacBookPro's needs reboot=p to be able to reboot
- */
-static int __init set_pci_reboot(const struct dmi_system_id *d)
-{
-	if (reboot_type != BOOT_CF9) {
-		reboot_type = BOOT_CF9;
-		printk(KERN_INFO "%s series board detected. "
-		       "Selecting PCI-method for reboots.\n", d->ident);
-	}
-	return 0;
-}
-
-static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
 	{	/* Handle problems with rebooting on Apple MacBook5 */
 		.callback = set_pci_reboot,
 		.ident = "Apple MacBook5",
@@ -474,17 +454,17 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
 	{ }
 };
 
-static int __init pci_reboot_init(void)
+static int __init reboot_init(void)
 {
-	/* Only do the DMI check if reboot_type hasn't been overridden
+	/*
+	 * Only do the DMI check if reboot_type hasn't been overridden
 	 * on the command line
 	 */
-	if (reboot_default) {
-		dmi_check_system(pci_reboot_dmi_table);
-	}
+	if (reboot_default)
+		dmi_check_system(reboot_dmi_table);
 	return 0;
 }
-core_initcall(pci_reboot_init);
+core_initcall(reboot_init);
 
 static inline void kb_wait(void)
 {
@@ -502,14 +482,14 @@ static void vmxoff_nmi(int cpu, struct pt_regs *regs)
 	cpu_emergency_vmxoff();
 }
 
-/* Use NMIs as IPIs to tell all CPUs to disable virtualization
- */
+/* Use NMIs as IPIs to tell all CPUs to disable virtualization */
 static void emergency_vmx_disable_all(void)
 {
 	/* Just make sure we won't change CPUs while doing this */
 	local_irq_disable();
 
-	/* We need to disable VMX on all CPUs before rebooting, otherwise
+	/*
+	 * We need to disable VMX on all CPUs before rebooting, otherwise
 	 * we risk hanging up the machine, because the CPU ignore INIT
 	 * signals when VMX is enabled.
 	 *
@@ -528,8 +508,7 @@ static void emergency_vmx_disable_all(void)
 	 * is still enabling VMX.
 	 */
 	if (cpu_has_vmx() && cpu_vmx_enabled()) {
-		/* Disable VMX on this CPU.
-		 */
+		/* Disable VMX on this CPU. */
 		cpu_vmxoff();
 
 		/* Halt and disable VMX on the other CPUs */
@@ -574,12 +553,12 @@ static void native_machine_emergency_restart(void)
 		/* Could also try the reset bit in the Hammer NB */
 		switch (reboot_type) {
 		case BOOT_KBD:
-			mach_reboot_fixups(); /* for board specific fixups */
+			mach_reboot_fixups(); /* For board specific fixups */
 
 			for (i = 0; i < 10; i++) {
 				kb_wait();
 				udelay(50);
-				outb(0xfe, 0x64); /* pulse reset low */
+				outb(0xfe, 0x64); /* Pulse reset low */
 				udelay(50);
 			}
 			if (attempt == 0 && orig_reboot_type == BOOT_ACPI) {
@@ -621,7 +600,7 @@ static void native_machine_emergency_restart(void)
 
 		case BOOT_CF9:
 			port_cf9_safe = true;
-			/* fall through */
+			/* Fall through */
 
 		case BOOT_CF9_COND:
 			if (port_cf9_safe) {
@@ -659,9 +638,12 @@ void native_machine_shutdown(void)
 	/* Make certain I only run on the appropriate processor */
 	set_cpus_allowed_ptr(current, cpumask_of(reboot_cpu_id));
 
-	/* O.K Now that I'm on the appropriate processor,
-	 * stop all of the others.
+	/*
+	 * O.K Now that I'm on the appropriate processor, stop all of the
+	 * others. Also disable the local irq to not receive the per-cpu
+	 * timer interrupt which may trigger scheduler's load balance.
 	 */
+	local_irq_disable();
 	stop_other_cpus();
 #endif
 
@@ -697,12 +679,11 @@ static void native_machine_restart(char *__unused)
 
 static void native_machine_halt(void)
 {
-	/* stop other cpus and apics */
+	/* Stop other cpus and apics */
 	machine_shutdown();
 
 	tboot_shutdown(TB_SHUTDOWN_HALT);
 
-	/* stop this cpu */
 	stop_this_cpu(NULL);
 }
 
@@ -713,7 +694,7 @@ static void native_machine_power_off(void)
 			machine_shutdown();
 		pm_power_off();
 	}
-	/* a fallback in case there is no PM info available */
+	/* A fallback in case there is no PM info available */
 	tboot_shutdown(TB_SHUTDOWN_HALT);
 }
 
@@ -775,7 +756,8 @@ static int crash_nmi_callback(unsigned int val, struct pt_regs *regs)
 
 	cpu = raw_smp_processor_id();
 
-	/* Don't do anything if this handler is invoked on crashing cpu.
+	/*
+	 * Don't do anything if this handler is invoked on crashing cpu.
 	 * Otherwise, system will completely hang. Crashing cpu can get
 	 * an NMI if system was initially booted with nmi_watchdog parameter.
 	 */
@@ -799,7 +781,8 @@ static void smp_send_nmi_allbutself(void)
 	apic->send_IPI_allbutself(NMI_VECTOR);
 }
 
-/* Halt all other CPUs, calling the specified function on each of them
+/*
+ * Halt all other CPUs, calling the specified function on each of them
  *
  * This function can be used to halt all other CPUs on crash
  * or emergency reboot time. The function passed as parameter
@@ -810,7 +793,7 @@ void nmi_shootdown_cpus(nmi_shootdown_cb callback)
 	unsigned long msecs;
 	local_irq_disable();
 
-	/* Make a note of crashing cpu. Will be used in NMI callback.*/
+	/* Make a note of crashing cpu. Will be used in NMI callback. */
 	crashing_cpu = safe_smp_processor_id();
 
 	shootdown_callback = callback;
@@ -819,8 +802,9 @@ void nmi_shootdown_cpus(nmi_shootdown_cb callback)
 	/* Would it be better to replace the trap vector here? */
 	if (register_nmi_handler(NMI_LOCAL, crash_nmi_callback,
 				 NMI_FLAG_FIRST, "crash"))
-		return;		/* return what? */
-	/* Ensure the new callback function is set before sending
+		return;		/* Return what? */
+	/*
+	 * Ensure the new callback function is set before sending
 	 * out the NMI
 	 */
 	wmb();
diff --git a/arch/x86/kernel/reboot_32.S b/arch/x86/kernel/reboot_32.S
deleted file mode 100644
index 1d5c46d..0000000
--- a/arch/x86/kernel/reboot_32.S
+++ /dev/null
@@ -1,135 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/segment.h>
-#include <asm/page_types.h>
-
-/*
- * The following code and data reboots the machine by switching to real
- * mode and jumping to the BIOS reset entry point, as if the CPU has
- * really been reset.  The previous version asked the keyboard
- * controller to pulse the CPU reset line, which is more thorough, but
- * doesn't work with at least one type of 486 motherboard.  It is easy
- * to stop this code working; hence the copious comments.
- *
- * This code is called with the restart type (0 = BIOS, 1 = APM) in %eax.
- */
-	.section ".x86_trampoline","a"
-	.balign 16
-	.code32
-ENTRY(machine_real_restart_asm)
-r_base = .
-	/* Get our own relocated address */
-	call	1f
-1:	popl	%ebx
-	subl	$(1b - r_base), %ebx
-
-	/* Compute the equivalent real-mode segment */
-	movl	%ebx, %ecx
-	shrl	$4, %ecx
-	
-	/* Patch post-real-mode segment jump */
-	movw	(dispatch_table - r_base)(%ebx,%eax,2),%ax
-	movw	%ax, (101f - r_base)(%ebx)
-	movw	%cx, (102f - r_base)(%ebx)
-
-	/* Set up the IDT for real mode. */
-	lidtl	(machine_real_restart_idt - r_base)(%ebx)
-
-	/*
-	 * Set up a GDT from which we can load segment descriptors for real
-	 * mode.  The GDT is not used in real mode; it is just needed here to
-	 * prepare the descriptors.
-	 */
-	lgdtl	(machine_real_restart_gdt - r_base)(%ebx)
-
-	/*
-	 * Load the data segment registers with 16-bit compatible values
-	 */
-	movl	$16, %ecx
-	movl	%ecx, %ds
-	movl	%ecx, %es
-	movl	%ecx, %fs
-	movl	%ecx, %gs
-	movl	%ecx, %ss
-	ljmpl	$8, $1f - r_base
-
-/*
- * This is 16-bit protected mode code to disable paging and the cache,
- * switch to real mode and jump to the BIOS reset code.
- *
- * The instruction that switches to real mode by writing to CR0 must be
- * followed immediately by a far jump instruction, which set CS to a
- * valid value for real mode, and flushes the prefetch queue to avoid
- * running instructions that have already been decoded in protected
- * mode.
- *
- * Clears all the flags except ET, especially PG (paging), PE
- * (protected-mode enable) and TS (task switch for coprocessor state
- * save).  Flushes the TLB after paging has been disabled.  Sets CD and
- * NW, to disable the cache on a 486, and invalidates the cache.  This
- * is more like the state of a 486 after reset.  I don't know if
- * something else should be done for other chips.
- *
- * More could be done here to set up the registers as if a CPU reset had
- * occurred; hopefully real BIOSs don't assume much.  This is not the
- * actual BIOS entry point, anyway (that is at 0xfffffff0).
- *
- * Most of this work is probably excessive, but it is what is tested.
- */
-	.code16
-1:
-	xorl	%ecx, %ecx
-	movl	%cr0, %eax
-	andl	$0x00000011, %eax
-	orl	$0x60000000, %eax
-	movl	%eax, %cr0
-	movl	%ecx, %cr3
-	movl	%cr0, %edx
-	andl	$0x60000000, %edx	/* If no cache bits -> no wbinvd */
-	jz	2f
-	wbinvd
-2:
-	andb	$0x10, %al
-	movl	%eax, %cr0
-	.byte	0xea			/* ljmpw */
-101:	.word	0			/* Offset */
-102:	.word	0			/* Segment */
-
-bios:
-	ljmpw	$0xf000, $0xfff0
-
-apm:
-	movw	$0x1000, %ax
-	movw	%ax, %ss
-	movw	$0xf000, %sp
-	movw	$0x5307, %ax
-	movw	$0x0001, %bx
-	movw	$0x0003, %cx
-	int	$0x15
-
-END(machine_real_restart_asm)
-
-	.balign 16
-	/* These must match <asm/reboot.h */
-dispatch_table:
-	.word	bios - r_base
-	.word	apm - r_base
-END(dispatch_table)
-
-	.balign 16
-machine_real_restart_idt:
-	.word	0xffff		/* Length - real mode default value */
-	.long	0		/* Base - real mode default value */
-END(machine_real_restart_idt)
-
-	.balign 16
-ENTRY(machine_real_restart_gdt)
-	.quad	0		/* Self-pointer, filled in by PM code */
-	.quad	0		/* 16-bit code segment, filled in by PM code */
-	/*
-	 * 16-bit data segment with the selector value 16 = 0x10 and
-	 * base value 0x100; since this is consistent with real mode
-	 * semantics we don't have to reload the segments once CR0.PE = 0.
-	 */
-	.quad	GDT_ENTRY(0x0093, 0x100, 0xffff)
-END(machine_real_restart_gdt)
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 1a29015..16be6dc 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -34,7 +34,6 @@
 #include <linux/memblock.h>
 #include <linux/seq_file.h>
 #include <linux/console.h>
-#include <linux/mca.h>
 #include <linux/root_dev.h>
 #include <linux/highmem.h>
 #include <linux/module.h>
@@ -50,6 +49,7 @@
 #include <asm/pci-direct.h>
 #include <linux/init_ohci1394_dma.h>
 #include <linux/kvm_para.h>
+#include <linux/dma-contiguous.h>
 
 #include <linux/errno.h>
 #include <linux/kernel.h>
@@ -73,7 +73,7 @@
 
 #include <asm/mtrr.h>
 #include <asm/apic.h>
-#include <asm/trampoline.h>
+#include <asm/realmode.h>
 #include <asm/e820.h>
 #include <asm/mpspec.h>
 #include <asm/setup.h>
@@ -179,12 +179,6 @@ struct cpuinfo_x86 new_cpu_data __cpuinitdata = {0, 0, 0, 0, -1, 1, 0, 0, -1};
 /* common cpu data for all cpus */
 struct cpuinfo_x86 boot_cpu_data __read_mostly = {0, 0, 0, 0, -1, 1, 0, 0, -1};
 EXPORT_SYMBOL(boot_cpu_data);
-static void set_mca_bus(int x)
-{
-#ifdef CONFIG_MCA
-	MCA_bus = x;
-#endif
-}
 
 unsigned int def_to_bigsmp;
 
@@ -340,8 +334,8 @@ static void __init relocate_initrd(void)
 	memblock_reserve(ramdisk_here, area_size);
 	initrd_start = ramdisk_here + PAGE_OFFSET;
 	initrd_end   = initrd_start + ramdisk_size;
-	printk(KERN_INFO "Allocated new RAMDISK: %08llx - %08llx\n",
-			 ramdisk_here, ramdisk_here + ramdisk_size);
+	printk(KERN_INFO "Allocated new RAMDISK: [mem %#010llx-%#010llx]\n",
+			 ramdisk_here, ramdisk_here + ramdisk_size - 1);
 
 	q = (char *)initrd_start;
 
@@ -372,8 +366,8 @@ static void __init relocate_initrd(void)
 	/* high pages is not converted by early_res_to_bootmem */
 	ramdisk_image = boot_params.hdr.ramdisk_image;
 	ramdisk_size  = boot_params.hdr.ramdisk_size;
-	printk(KERN_INFO "Move RAMDISK from %016llx - %016llx to"
-		" %08llx - %08llx\n",
+	printk(KERN_INFO "Move RAMDISK from [mem %#010llx-%#010llx] to"
+		" [mem %#010llx-%#010llx]\n",
 		ramdisk_image, ramdisk_image + ramdisk_size - 1,
 		ramdisk_here, ramdisk_here + ramdisk_size - 1);
 }
@@ -393,14 +387,13 @@ static void __init reserve_initrd(void)
 	initrd_start = 0;
 
 	if (ramdisk_size >= (end_of_lowmem>>1)) {
-		memblock_free(ramdisk_image, ramdisk_end - ramdisk_image);
-		printk(KERN_ERR "initrd too large to handle, "
-		       "disabling initrd\n");
-		return;
+		panic("initrd too large to handle, "
+		       "disabling initrd (%lld needed, %lld available)\n",
+		       ramdisk_size, end_of_lowmem>>1);
 	}
 
-	printk(KERN_INFO "RAMDISK: %08llx - %08llx\n", ramdisk_image,
-			ramdisk_end);
+	printk(KERN_INFO "RAMDISK: [mem %#010llx-%#010llx]\n", ramdisk_image,
+			ramdisk_end - 1);
 
 
 	if (ramdisk_end <= end_of_lowmem) {
@@ -717,7 +710,6 @@ void __init setup_arch(char **cmdline_p)
 	apm_info.bios = boot_params.apm_bios_info;
 	ist_info = boot_params.ist_info;
 	if (boot_params.sys_desc_table.length != 0) {
-		set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
 		machine_id = boot_params.sys_desc_table.table[0];
 		machine_submodel_id = boot_params.sys_desc_table.table[1];
 		BIOS_revision = boot_params.sys_desc_table.table[2];
@@ -914,10 +906,10 @@ void __init setup_arch(char **cmdline_p)
 	setup_bios_corruption_check();
 #endif
 
-	printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n",
-			max_pfn_mapped<<PAGE_SHIFT);
+	printk(KERN_DEBUG "initial memory mapped: [mem 0x00000000-%#010lx]\n",
+			(max_pfn_mapped<<PAGE_SHIFT) - 1);
 
-	setup_trampolines();
+	setup_real_mode();
 
 	init_gbpages();
 
@@ -934,6 +926,7 @@ void __init setup_arch(char **cmdline_p)
 	}
 #endif
 	memblock.current_limit = get_max_mapped();
+	dma_contiguous_reserve(0);
 
 	/*
 	 * NOTE: On x86-32, only from this point on, fixmaps are ready for use.
@@ -975,6 +968,8 @@ void __init setup_arch(char **cmdline_p)
 	if (boot_cpu_data.cpuid_level >= 0) {
 		/* A CPU has %cr4 if and only if it has CPUID */
 		mmu_cr4_features = read_cr4();
+		if (trampoline_cr4_features)
+			*trampoline_cr4_features = mmu_cr4_features;
 	}
 
 #ifdef CONFIG_X86_32
@@ -1012,7 +1007,8 @@ void __init setup_arch(char **cmdline_p)
 	init_cpu_to_node();
 
 	init_apic_mappings();
-	ioapic_and_gsi_init();
+	if (x86_io_apic_ops.init)
+		x86_io_apic_ops.init();
 
 	kvm_guest_init();
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 71f4727..5a98aa2 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -185,10 +185,22 @@ void __init setup_per_cpu_areas(void)
 #endif
 	rc = -EINVAL;
 	if (pcpu_chosen_fc != PCPU_FC_PAGE) {
-		const size_t atom_size = cpu_has_pse ? PMD_SIZE : PAGE_SIZE;
 		const size_t dyn_size = PERCPU_MODULE_RESERVE +
 			PERCPU_DYNAMIC_RESERVE - PERCPU_FIRST_CHUNK_RESERVE;
+		size_t atom_size;
 
+		/*
+		 * On 64bit, use PMD_SIZE for atom_size so that embedded
+		 * percpu areas are aligned to PMD.  This, in the future,
+		 * can also allow using PMD mappings in vmalloc area.  Use
+		 * PAGE_SIZE on 32bit as vmalloc space is highly contended
+		 * and large vmalloc area allocs can easily fail.
+		 */
+#ifdef CONFIG_X86_64
+		atom_size = PMD_SIZE;
+#else
+		atom_size = PAGE_SIZE;
+#endif
 		rc = pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
 					    dyn_size, atom_size,
 					    pcpu_cpu_distance,
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 115eac4..21af737 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -18,6 +18,7 @@
 #include <linux/personality.h>
 #include <linux/uaccess.h>
 #include <linux/user-return-notifier.h>
+#include <linux/uprobes.h>
 
 #include <asm/processor.h>
 #include <asm/ucontext.h>
@@ -478,18 +479,8 @@ asmlinkage int
 sys_sigsuspend(int history0, int history1, old_sigset_t mask)
 {
 	sigset_t blocked;
-
-	current->saved_sigmask = current->blocked;
-
-	mask &= _BLOCKABLE;
 	siginitset(&blocked, mask);
-	set_current_blocked(&blocked);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-
-	set_restore_sigmask();
-	return -ERESTARTNOHAND;
+	return sigsuspend(&blocked);
 }
 
 asmlinkage int
@@ -564,7 +555,6 @@ unsigned long sys_sigreturn(struct pt_regs *regs)
 				    sizeof(frame->extramask))))
 		goto badframe;
 
-	sigdelsetmask(&set, ~_BLOCKABLE);
 	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->sc, &ax))
@@ -590,7 +580,6 @@ long sys_rt_sigreturn(struct pt_regs *regs)
 	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
 		goto badframe;
 
-	sigdelsetmask(&set, ~_BLOCKABLE);
 	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
@@ -656,42 +645,28 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		struct pt_regs *regs)
 {
 	int usig = signr_convert(sig);
-	sigset_t *set = &current->blocked;
-	int ret;
-
-	if (current_thread_info()->status & TS_RESTORE_SIGMASK)
-		set = &current->saved_sigmask;
+	sigset_t *set = sigmask_to_save();
 
 	/* Set up the stack frame */
 	if (is_ia32) {
 		if (ka->sa.sa_flags & SA_SIGINFO)
-			ret = ia32_setup_rt_frame(usig, ka, info, set, regs);
+			return ia32_setup_rt_frame(usig, ka, info, set, regs);
 		else
-			ret = ia32_setup_frame(usig, ka, set, regs);
+			return ia32_setup_frame(usig, ka, set, regs);
 #ifdef CONFIG_X86_X32_ABI
 	} else if (is_x32) {
-		ret = x32_setup_rt_frame(usig, ka, info,
+		return x32_setup_rt_frame(usig, ka, info,
 					 (compat_sigset_t *)set, regs);
 #endif
 	} else {
-		ret = __setup_rt_frame(sig, ka, info, set, regs);
-	}
-
-	if (ret) {
-		force_sigsegv(sig, current);
-		return -EFAULT;
+		return __setup_rt_frame(sig, ka, info, set, regs);
 	}
-
-	current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-	return ret;
 }
 
-static int
+static void
 handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 		struct pt_regs *regs)
 {
-	int ret;
-
 	/* Are we from a system call? */
 	if (syscall_get_nr(current, regs) >= 0) {
 		/* If so, check system call restarting.. */
@@ -722,10 +697,10 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	    likely(test_and_clear_thread_flag(TIF_FORCED_TF)))
 		regs->flags &= ~X86_EFLAGS_TF;
 
-	ret = setup_rt_frame(sig, ka, info, regs);
-
-	if (ret)
-		return ret;
+	if (setup_rt_frame(sig, ka, info, regs) < 0) {
+		force_sigsegv(sig, current);
+		return;
+	}
 
 	/*
 	 * Clear the direction flag as per the ABI for function entry.
@@ -740,12 +715,8 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	 */
 	regs->flags &= ~X86_EFLAGS_TF;
 
-	block_sigmask(ka, sig);
-
-	tracehook_signal_handler(sig, info, ka, regs,
-				 test_thread_flag(TIF_SINGLESTEP));
-
-	return 0;
+	signal_delivered(sig, info, ka, regs,
+			 test_thread_flag(TIF_SINGLESTEP));
 }
 
 #ifdef CONFIG_X86_32
@@ -766,16 +737,6 @@ static void do_signal(struct pt_regs *regs)
 	siginfo_t info;
 	int signr;
 
-	/*
-	 * We want the common case to go fast, which is why we may in certain
-	 * cases get here from kernel mode. Just return without doing anything
-	 * if so.
-	 * X86_32: vm86 regs switched out by assembly code before reaching
-	 * here, so testing against kernel CS suffices.
-	 */
-	if (!user_mode(regs))
-		return;
-
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
 		/* Whee! Actually deliver the signal.  */
@@ -805,10 +766,7 @@ static void do_signal(struct pt_regs *regs)
 	 * If there's no signal to deliver, we just put the saved sigmask
 	 * back.
 	 */
-	if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
-		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-		set_current_blocked(&current->saved_sigmask);
-	}
+	restore_saved_sigmask();
 }
 
 /*
@@ -824,6 +782,11 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 		mce_notify_process();
 #endif /* CONFIG_X86_64 && CONFIG_X86_MCE */
 
+	if (thread_info_flags & _TIF_UPROBE) {
+		clear_thread_flag(TIF_UPROBE);
+		uprobe_notify_resume(regs);
+	}
+
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
@@ -831,8 +794,6 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
-		if (current->replacement_session_keyring)
-			key_replace_session_keyring();
 	}
 	if (thread_info_flags & _TIF_USER_RETURN_NOTIFY)
 		fire_user_return_notifiers();
@@ -940,7 +901,6 @@ asmlinkage long sys32_x32_rt_sigreturn(struct pt_regs *regs)
 	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
 		goto badframe;
 
-	sigdelsetmask(&set, ~_BLOCKABLE);
 	set_current_blocked(&set);
 
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 66c74f4..48d2b7d 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -109,6 +109,9 @@
  *	about nothing of note with C stepping upwards.
  */
 
+static atomic_t stopping_cpu = ATOMIC_INIT(-1);
+static bool smp_no_nmi_ipi = false;
+
 /*
  * this function sends a 'reschedule' IPI to another CPU.
  * it goes straight through and wastes no time serializing
@@ -149,8 +152,6 @@ void native_send_call_func_ipi(const struct cpumask *mask)
 	free_cpumask_var(allbutself);
 }
 
-static atomic_t stopping_cpu = ATOMIC_INIT(-1);
-
 static int smp_stop_nmi_callback(unsigned int val, struct pt_regs *regs)
 {
 	/* We are registered on stopping cpu too, avoid spurious NMI */
@@ -162,7 +163,19 @@ static int smp_stop_nmi_callback(unsigned int val, struct pt_regs *regs)
 	return NMI_HANDLED;
 }
 
-static void native_nmi_stop_other_cpus(int wait)
+/*
+ * this function calls the 'stop' function on all other CPUs in the system.
+ */
+
+asmlinkage void smp_reboot_interrupt(void)
+{
+	ack_APIC_irq();
+	irq_enter();
+	stop_this_cpu(NULL);
+	irq_exit();
+}
+
+static void native_stop_other_cpus(int wait)
 {
 	unsigned long flags;
 	unsigned long timeout;
@@ -174,20 +187,25 @@ static void native_nmi_stop_other_cpus(int wait)
 	 * Use an own vector here because smp_call_function
 	 * does lots of things not suitable in a panic situation.
 	 */
+
+	/*
+	 * We start by using the REBOOT_VECTOR irq.
+	 * The irq is treated as a sync point to allow critical
+	 * regions of code on other cpus to release their spin locks
+	 * and re-enable irqs.  Jumping straight to an NMI might
+	 * accidentally cause deadlocks with further shutdown/panic
+	 * code.  By syncing, we give the cpus up to one second to
+	 * finish their work before we force them off with the NMI.
+	 */
 	if (num_online_cpus() > 1) {
 		/* did someone beat us here? */
 		if (atomic_cmpxchg(&stopping_cpu, -1, safe_smp_processor_id()) != -1)
 			return;
 
-		if (register_nmi_handler(NMI_LOCAL, smp_stop_nmi_callback,
-					 NMI_FLAG_FIRST, "smp_stop"))
-			/* Note: we ignore failures here */
-			return;
-
-		/* sync above data before sending NMI */
+		/* sync above data before sending IRQ */
 		wmb();
 
-		apic->send_IPI_allbutself(NMI_VECTOR);
+		apic->send_IPI_allbutself(REBOOT_VECTOR);
 
 		/*
 		 * Don't wait longer than a second if the caller
@@ -197,63 +215,37 @@ static void native_nmi_stop_other_cpus(int wait)
 		while (num_online_cpus() > 1 && (wait || timeout--))
 			udelay(1);
 	}
+	
+	/* if the REBOOT_VECTOR didn't work, try with the NMI */
+	if ((num_online_cpus() > 1) && (!smp_no_nmi_ipi))  {
+		if (register_nmi_handler(NMI_LOCAL, smp_stop_nmi_callback,
+					 NMI_FLAG_FIRST, "smp_stop"))
+			/* Note: we ignore failures here */
+			/* Hope the REBOOT_IRQ is good enough */
+			goto finish;
 
-	local_irq_save(flags);
-	disable_local_APIC();
-	local_irq_restore(flags);
-}
-
-/*
- * this function calls the 'stop' function on all other CPUs in the system.
- */
-
-asmlinkage void smp_reboot_interrupt(void)
-{
-	ack_APIC_irq();
-	irq_enter();
-	stop_this_cpu(NULL);
-	irq_exit();
-}
-
-static void native_irq_stop_other_cpus(int wait)
-{
-	unsigned long flags;
-	unsigned long timeout;
+		/* sync above data before sending IRQ */
+		wmb();
 
-	if (reboot_force)
-		return;
+		pr_emerg("Shutting down cpus with NMI\n");
 
-	/*
-	 * Use an own vector here because smp_call_function
-	 * does lots of things not suitable in a panic situation.
-	 * On most systems we could also use an NMI here,
-	 * but there are a few systems around where NMI
-	 * is problematic so stay with an non NMI for now
-	 * (this implies we cannot stop CPUs spinning with irq off
-	 * currently)
-	 */
-	if (num_online_cpus() > 1) {
-		apic->send_IPI_allbutself(REBOOT_VECTOR);
+		apic->send_IPI_allbutself(NMI_VECTOR);
 
 		/*
-		 * Don't wait longer than a second if the caller
+		 * Don't wait longer than a 10 ms if the caller
 		 * didn't ask us to wait.
 		 */
-		timeout = USEC_PER_SEC;
+		timeout = USEC_PER_MSEC * 10;
 		while (num_online_cpus() > 1 && (wait || timeout--))
 			udelay(1);
 	}
 
+finish:
 	local_irq_save(flags);
 	disable_local_APIC();
 	local_irq_restore(flags);
 }
 
-static void native_smp_disable_nmi_ipi(void)
-{
-	smp_ops.stop_other_cpus = native_irq_stop_other_cpus;
-}
-
 /*
  * Reschedule call back.
  */
@@ -287,8 +279,8 @@ void smp_call_function_single_interrupt(struct pt_regs *regs)
 
 static int __init nonmi_ipi_setup(char *str)
 {
-        native_smp_disable_nmi_ipi();
-        return 1;
+	smp_no_nmi_ipi = true;
+	return 1;
 }
 
 __setup("nonmi_ipi", nonmi_ipi_setup);
@@ -298,7 +290,7 @@ struct smp_ops smp_ops = {
 	.smp_prepare_cpus	= native_smp_prepare_cpus,
 	.smp_cpus_done		= native_smp_cpus_done,
 
-	.stop_other_cpus	= native_nmi_stop_other_cpus,
+	.stop_other_cpus	= native_stop_other_cpus,
 	.smp_send_reschedule	= native_smp_send_reschedule,
 
 	.cpu_up			= native_cpu_up,
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 6e1e406..3fab55b 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -57,7 +57,7 @@
 #include <asm/nmi.h>
 #include <asm/irq.h>
 #include <asm/idle.h>
-#include <asm/trampoline.h>
+#include <asm/realmode.h>
 #include <asm/cpu.h>
 #include <asm/numa.h>
 #include <asm/pgtable.h>
@@ -73,23 +73,13 @@
 #include <asm/smpboot_hooks.h>
 #include <asm/i8259.h>
 
+#include <asm/realmode.h>
+
 /* State of each CPU */
 DEFINE_PER_CPU(int, cpu_state) = { 0 };
 
-/* Store all idle threads, this can be reused instead of creating
-* a new thread. Also avoids complicated thread destroy functionality
-* for idle threads.
-*/
 #ifdef CONFIG_HOTPLUG_CPU
 /*
- * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is
- * removed after init for !CONFIG_HOTPLUG_CPU.
- */
-static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
-#define get_idle_for_cpu(x)      (per_cpu(idle_thread_array, x))
-#define set_idle_for_cpu(x, p)   (per_cpu(idle_thread_array, x) = (p))
-
-/*
  * We need this for trampoline_base protection from concurrent accesses when
  * off- and onlining cores wildly.
  */
@@ -97,20 +87,16 @@ static DEFINE_MUTEX(x86_cpu_hotplug_driver_mutex);
 
 void cpu_hotplug_driver_lock(void)
 {
-        mutex_lock(&x86_cpu_hotplug_driver_mutex);
+	mutex_lock(&x86_cpu_hotplug_driver_mutex);
 }
 
 void cpu_hotplug_driver_unlock(void)
 {
-        mutex_unlock(&x86_cpu_hotplug_driver_mutex);
+	mutex_unlock(&x86_cpu_hotplug_driver_mutex);
 }
 
 ssize_t arch_cpu_probe(const char *buf, size_t count) { return -1; }
 ssize_t arch_cpu_release(const char *buf, size_t count) { return -1; }
-#else
-static struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
-#define get_idle_for_cpu(x)      (idle_thread_array[(x)])
-#define set_idle_for_cpu(x, p)   (idle_thread_array[(x)] = (p))
 #endif
 
 /* Number of siblings per CPU package */
@@ -315,59 +301,99 @@ void __cpuinit smp_store_cpu_info(int id)
 		identify_secondary_cpu(c);
 }
 
-static void __cpuinit link_thread_siblings(int cpu1, int cpu2)
+static bool __cpuinit
+topology_sane(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o, const char *name)
+{
+	int cpu1 = c->cpu_index, cpu2 = o->cpu_index;
+
+	return !WARN_ONCE(cpu_to_node(cpu1) != cpu_to_node(cpu2),
+		"sched: CPU #%d's %s-sibling CPU #%d is not on the same node! "
+		"[node: %d != %d]. Ignoring dependency.\n",
+		cpu1, name, cpu2, cpu_to_node(cpu1), cpu_to_node(cpu2));
+}
+
+#define link_mask(_m, c1, c2)						\
+do {									\
+	cpumask_set_cpu((c1), cpu_##_m##_mask(c2));			\
+	cpumask_set_cpu((c2), cpu_##_m##_mask(c1));			\
+} while (0)
+
+static bool __cpuinit match_smt(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 {
-	cpumask_set_cpu(cpu1, cpu_sibling_mask(cpu2));
-	cpumask_set_cpu(cpu2, cpu_sibling_mask(cpu1));
-	cpumask_set_cpu(cpu1, cpu_core_mask(cpu2));
-	cpumask_set_cpu(cpu2, cpu_core_mask(cpu1));
-	cpumask_set_cpu(cpu1, cpu_llc_shared_mask(cpu2));
-	cpumask_set_cpu(cpu2, cpu_llc_shared_mask(cpu1));
+	if (cpu_has(c, X86_FEATURE_TOPOEXT)) {
+		int cpu1 = c->cpu_index, cpu2 = o->cpu_index;
+
+		if (c->phys_proc_id == o->phys_proc_id &&
+		    per_cpu(cpu_llc_id, cpu1) == per_cpu(cpu_llc_id, cpu2) &&
+		    c->compute_unit_id == o->compute_unit_id)
+			return topology_sane(c, o, "smt");
+
+	} else if (c->phys_proc_id == o->phys_proc_id &&
+		   c->cpu_core_id == o->cpu_core_id) {
+		return topology_sane(c, o, "smt");
+	}
+
+	return false;
 }
 
+static bool __cpuinit match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
+{
+	int cpu1 = c->cpu_index, cpu2 = o->cpu_index;
+
+	if (per_cpu(cpu_llc_id, cpu1) != BAD_APICID &&
+	    per_cpu(cpu_llc_id, cpu1) == per_cpu(cpu_llc_id, cpu2))
+		return topology_sane(c, o, "llc");
+
+	return false;
+}
+
+static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
+{
+	if (c->phys_proc_id == o->phys_proc_id)
+		return topology_sane(c, o, "mc");
+
+	return false;
+}
 
 void __cpuinit set_cpu_sibling_map(int cpu)
 {
-	int i;
+	bool has_mc = boot_cpu_data.x86_max_cores > 1;
+	bool has_smt = smp_num_siblings > 1;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
+	struct cpuinfo_x86 *o;
+	int i;
 
 	cpumask_set_cpu(cpu, cpu_sibling_setup_mask);
 
-	if (smp_num_siblings > 1) {
-		for_each_cpu(i, cpu_sibling_setup_mask) {
-			struct cpuinfo_x86 *o = &cpu_data(i);
-
-			if (cpu_has(c, X86_FEATURE_TOPOEXT)) {
-				if (c->phys_proc_id == o->phys_proc_id &&
-				    per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i) &&
-				    c->compute_unit_id == o->compute_unit_id)
-					link_thread_siblings(cpu, i);
-			} else if (c->phys_proc_id == o->phys_proc_id &&
-				   c->cpu_core_id == o->cpu_core_id) {
-				link_thread_siblings(cpu, i);
-			}
-		}
-	} else {
+	if (!has_smt && !has_mc) {
 		cpumask_set_cpu(cpu, cpu_sibling_mask(cpu));
+		cpumask_set_cpu(cpu, cpu_llc_shared_mask(cpu));
+		cpumask_set_cpu(cpu, cpu_core_mask(cpu));
+		c->booted_cores = 1;
+		return;
 	}
 
-	cpumask_set_cpu(cpu, cpu_llc_shared_mask(cpu));
+	for_each_cpu(i, cpu_sibling_setup_mask) {
+		o = &cpu_data(i);
+
+		if ((i == cpu) || (has_smt && match_smt(c, o)))
+			link_mask(sibling, cpu, i);
+
+		if ((i == cpu) || (has_mc && match_llc(c, o)))
+			link_mask(llc_shared, cpu, i);
 
-	if (__this_cpu_read(cpu_info.x86_max_cores) == 1) {
-		cpumask_copy(cpu_core_mask(cpu), cpu_sibling_mask(cpu));
-		c->booted_cores = 1;
-		return;
 	}
 
+	/*
+	 * This needs a separate iteration over the cpus because we rely on all
+	 * cpu_sibling_mask links to be set-up.
+	 */
 	for_each_cpu(i, cpu_sibling_setup_mask) {
-		if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
-		    per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
-			cpumask_set_cpu(i, cpu_llc_shared_mask(cpu));
-			cpumask_set_cpu(cpu, cpu_llc_shared_mask(i));
-		}
-		if (c->phys_proc_id == cpu_data(i).phys_proc_id) {
-			cpumask_set_cpu(i, cpu_core_mask(cpu));
-			cpumask_set_cpu(cpu, cpu_core_mask(i));
+		o = &cpu_data(i);
+
+		if ((i == cpu) || (has_mc && match_mc(c, o))) {
+			link_mask(core, cpu, i);
+
 			/*
 			 *  Does this new cpu bringup a new core?
 			 */
@@ -393,16 +419,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 /* maps the cpu to the sched domain representing multi-core */
 const struct cpumask *cpu_coregroup_mask(int cpu)
 {
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	/*
-	 * For perf, we return last level cache shared map.
-	 * And for power savings, we return cpu_core_map
-	 */
-	if ((sched_mc_power_savings || sched_smt_power_savings) &&
-	    !(cpu_has(c, X86_FEATURE_AMD_DCM)))
-		return cpu_core_mask(cpu);
-	else
-		return cpu_llc_shared_mask(cpu);
+	return cpu_llc_shared_mask(cpu);
 }
 
 static void impress_friends(void)
@@ -618,22 +635,6 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
 	return (send_status | accept_status);
 }
 
-struct create_idle {
-	struct work_struct work;
-	struct task_struct *idle;
-	struct completion done;
-	int cpu;
-};
-
-static void __cpuinit do_fork_idle(struct work_struct *work)
-{
-	struct create_idle *c_idle =
-		container_of(work, struct create_idle, work);
-
-	c_idle->idle = fork_idle(c_idle->cpu);
-	complete(&c_idle->done);
-}
-
 /* reduce the number of lines printed when booting a large cpu count system */
 static void __cpuinit announce_cpu(int cpu, int apicid)
 {
@@ -660,61 +661,35 @@ static void __cpuinit announce_cpu(int cpu, int apicid)
  * Returns zero if CPU booted OK, else error code from
  * ->wakeup_secondary_cpu.
  */
-static int __cpuinit do_boot_cpu(int apicid, int cpu)
+static int __cpuinit do_boot_cpu(int apicid, int cpu, struct task_struct *idle)
 {
+	volatile u32 *trampoline_status =
+		(volatile u32 *) __va(real_mode_header->trampoline_status);
+	/* start_ip had better be page-aligned! */
+	unsigned long start_ip = real_mode_header->trampoline_start;
+
 	unsigned long boot_error = 0;
-	unsigned long start_ip;
 	int timeout;
-	struct create_idle c_idle = {
-		.cpu	= cpu,
-		.done	= COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
-	};
-
-	INIT_WORK_ONSTACK(&c_idle.work, do_fork_idle);
 
 	alternatives_smp_switch(1);
 
-	c_idle.idle = get_idle_for_cpu(cpu);
+	idle->thread.sp = (unsigned long) (((struct pt_regs *)
+			  (THREAD_SIZE +  task_stack_page(idle))) - 1);
+	per_cpu(current_task, cpu) = idle;
 
-	/*
-	 * We can't use kernel_thread since we must avoid to
-	 * reschedule the child.
-	 */
-	if (c_idle.idle) {
-		c_idle.idle->thread.sp = (unsigned long) (((struct pt_regs *)
-			(THREAD_SIZE +  task_stack_page(c_idle.idle))) - 1);
-		init_idle(c_idle.idle, cpu);
-		goto do_rest;
-	}
-
-	schedule_work(&c_idle.work);
-	wait_for_completion(&c_idle.done);
-
-	if (IS_ERR(c_idle.idle)) {
-		printk("failed fork for CPU %d\n", cpu);
-		destroy_work_on_stack(&c_idle.work);
-		return PTR_ERR(c_idle.idle);
-	}
-
-	set_idle_for_cpu(cpu, c_idle.idle);
-do_rest:
-	per_cpu(current_task, cpu) = c_idle.idle;
 #ifdef CONFIG_X86_32
 	/* Stack for startup_32 can be just as for start_secondary onwards */
 	irq_ctx_init(cpu);
 #else
-	clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
+	clear_tsk_thread_flag(idle, TIF_FORK);
 	initial_gs = per_cpu_offset(cpu);
 	per_cpu(kernel_stack, cpu) =
-		(unsigned long)task_stack_page(c_idle.idle) -
+		(unsigned long)task_stack_page(idle) -
 		KERNEL_STACK_OFFSET + THREAD_SIZE;
 #endif
 	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
 	initial_code = (unsigned long)start_secondary;
-	stack_start  = c_idle.idle->thread.sp;
-
-	/* start_ip had better be page-aligned! */
-	start_ip = trampoline_address();
+	stack_start  = idle->thread.sp;
 
 	/* So we see what's up */
 	announce_cpu(cpu, apicid);
@@ -778,8 +753,7 @@ do_rest:
 			pr_debug("CPU%d: has booted.\n", cpu);
 		} else {
 			boot_error = 1;
-			if (*(volatile u32 *)TRAMPOLINE_SYM(trampoline_status)
-			    == 0xA5A5A5A5)
+			if (*trampoline_status == 0xA5A5A5A5)
 				/* trampoline started but...? */
 				pr_err("CPU%d: Stuck ??\n", cpu);
 			else
@@ -805,7 +779,7 @@ do_rest:
 	}
 
 	/* mark "stuck" area as not stuck */
-	*(volatile u32 *)TRAMPOLINE_SYM(trampoline_status) = 0;
+	*trampoline_status = 0;
 
 	if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
 		/*
@@ -813,12 +787,10 @@ do_rest:
 		 */
 		smpboot_restore_warm_reset_vector();
 	}
-
-	destroy_work_on_stack(&c_idle.work);
 	return boot_error;
 }
 
-int __cpuinit native_cpu_up(unsigned int cpu)
+int __cpuinit native_cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
 	int apicid = apic->cpu_present_to_apicid(cpu);
 	unsigned long flags;
@@ -851,7 +823,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 
 	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 
-	err = do_boot_cpu(apicid, cpu);
+	err = do_boot_cpu(apicid, cpu, tidle);
 	if (err) {
 		pr_debug("do_boot_cpu failed %d\n", err);
 		return -EIO;
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index 6410744..f84fe00 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -32,7 +32,7 @@
 #include <linux/mm.h>
 #include <linux/tboot.h>
 
-#include <asm/trampoline.h>
+#include <asm/realmode.h>
 #include <asm/processor.h>
 #include <asm/bootparam.h>
 #include <asm/pgtable.h>
@@ -44,7 +44,7 @@
 #include <asm/e820.h>
 #include <asm/io.h>
 
-#include "acpi/realmode/wakeup.h"
+#include "../realmode/rm/wakeup.h"
 
 /* Global pointer to shared data; NULL means no measured launch. */
 struct tboot *tboot __read_mostly;
@@ -201,7 +201,8 @@ static int tboot_setup_sleep(void)
 		add_mac_region(e820.map[i].addr, e820.map[i].size);
 	}
 
-	tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address;
+	tboot->acpi_sinfo.kernel_s3_resume_vector =
+		real_mode_header->wakeup_start;
 
 	return 0;
 }
diff --git a/arch/x86/kernel/test_rodata.c b/arch/x86/kernel/test_rodata.c
index c29e235..b79133a 100644
--- a/arch/x86/kernel/test_rodata.c
+++ b/arch/x86/kernel/test_rodata.c
@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
+#include <asm/asm.h>
 
 int rodata_test(void)
 {
@@ -42,14 +43,7 @@ int rodata_test(void)
 		".section .fixup,\"ax\"\n"
 		"2:	jmp 1b\n"
 		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"       .align 16\n"
-#ifdef CONFIG_X86_32
-		"	.long 0b,2b\n"
-#else
-		"	.quad 0b,2b\n"
-#endif
-		".previous"
+		_ASM_EXTABLE(0b,2b)
 		: [rslt] "=r" (result)
 		: [rodata_test] "r" (&rodata_test_data), [zero] "r" (0UL)
 	);
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index c6eba2b..24d3c91 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -14,7 +14,6 @@
 #include <linux/i8253.h>
 #include <linux/time.h>
 #include <linux/export.h>
-#include <linux/mca.h>
 
 #include <asm/vsyscall.h>
 #include <asm/x86_init.h>
@@ -58,11 +57,6 @@ EXPORT_SYMBOL(profile_pc);
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	global_clock_event->event_handler(global_clock_event);
-
-	/* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */
-	if (MCA_bus)
-		outb_p(inb_p(0x61)| 0x80, 0x61);
-
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
deleted file mode 100644
index a73b610..0000000
--- a/arch/x86/kernel/trampoline.c
+++ /dev/null
@@ -1,42 +0,0 @@
-#include <linux/io.h>
-#include <linux/memblock.h>
-
-#include <asm/trampoline.h>
-#include <asm/cacheflush.h>
-#include <asm/pgtable.h>
-
-unsigned char *x86_trampoline_base;
-
-void __init setup_trampolines(void)
-{
-	phys_addr_t mem;
-	size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start);
-
-	/* Has to be in very low memory so we can execute real-mode AP code. */
-	mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE);
-	if (!mem)
-		panic("Cannot allocate trampoline\n");
-
-	x86_trampoline_base = __va(mem);
-	memblock_reserve(mem, size);
-
-	printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n",
-	       x86_trampoline_base, (unsigned long long)mem, size);
-
-	memcpy(x86_trampoline_base, x86_trampoline_start, size);
-}
-
-/*
- * setup_trampolines() gets called very early, to guarantee the
- * availability of low memory.  This is before the proper kernel page
- * tables are set up, so we cannot set page permissions in that
- * function.  Thus, we use an arch_initcall instead.
- */
-static int __init configure_trampolines(void)
-{
-	size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start);
-
-	set_memory_x((unsigned long)x86_trampoline_base, size >> PAGE_SHIFT);
-	return 0;
-}
-arch_initcall(configure_trampolines);
diff --git a/arch/x86/kernel/trampoline_32.S b/arch/x86/kernel/trampoline_32.S
deleted file mode 100644
index 451c0a7..0000000
--- a/arch/x86/kernel/trampoline_32.S
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *
- *	Trampoline.S	Derived from Setup.S by Linus Torvalds
- *
- *	4 Jan 1997 Michael Chastain: changed to gnu as.
- *
- *	This is only used for booting secondary CPUs in SMP machine
- *
- *	Entry: CS:IP point to the start of our code, we are 
- *	in real mode with no stack, but the rest of the 
- *	trampoline page to make our stack and everything else
- *	is a mystery.
- *
- *	We jump into arch/x86/kernel/head_32.S.
- *
- *	On entry to trampoline_data, the processor is in real mode
- *	with 16-bit addressing and 16-bit data.  CS has some value
- *	and IP is zero.  Thus, data addresses need to be absolute
- *	(no relocation) and are taken with regard to r_base.
- *
- *	If you work on this file, check the object module with
- *	objdump --reloc to make sure there are no relocation
- *	entries except for:
- *
- *	TYPE              VALUE
- *	R_386_32          startup_32_smp
- *	R_386_32          boot_gdt
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/segment.h>
-#include <asm/page_types.h>
-
-#ifdef CONFIG_SMP
-
-	.section ".x86_trampoline","a"
-	.balign PAGE_SIZE
-	.code16
-
-ENTRY(trampoline_data)
-r_base = .
-	wbinvd			# Needed for NUMA-Q should be harmless for others
-	mov	%cs, %ax	# Code and data in the same place
-	mov	%ax, %ds
-
-	cli			# We should be safe anyway
-
-	movl	$0xA5A5A5A5, trampoline_status - r_base
-				# write marker for master knows we're running
-
-	/* GDT tables in non default location kernel can be beyond 16MB and
-	 * lgdt will not be able to load the address as in real mode default
-	 * operand size is 16bit. Use lgdtl instead to force operand size
-	 * to 32 bit.
-	 */
-
-	lidtl	boot_idt_descr - r_base	# load idt with 0, 0
-	lgdtl	boot_gdt_descr - r_base	# load gdt with whatever is appropriate
-
-	xor	%ax, %ax
-	inc	%ax		# protected mode (PE) bit
-	lmsw	%ax		# into protected mode
-	# flush prefetch and jump to startup_32_smp in arch/i386/kernel/head.S
-	ljmpl	$__BOOT_CS, $(startup_32_smp-__PAGE_OFFSET)
-
-	# These need to be in the same 64K segment as the above;
-	# hence we don't use the boot_gdt_descr defined in head.S
-boot_gdt_descr:
-	.word	__BOOT_DS + 7			# gdt limit
-	.long	boot_gdt - __PAGE_OFFSET	# gdt base
-
-boot_idt_descr:
-	.word	0				# idt limit = 0
-	.long	0				# idt base = 0L
-
-ENTRY(trampoline_status)
-	.long	0
-
-.globl trampoline_end
-trampoline_end:
-
-#endif /* CONFIG_SMP */
diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S
deleted file mode 100644
index 09ff517..0000000
--- a/arch/x86/kernel/trampoline_64.S
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- *
- *	Trampoline.S	Derived from Setup.S by Linus Torvalds
- *
- *	4 Jan 1997 Michael Chastain: changed to gnu as.
- *	15 Sept 2005 Eric Biederman: 64bit PIC support
- *
- *	Entry: CS:IP point to the start of our code, we are 
- *	in real mode with no stack, but the rest of the 
- *	trampoline page to make our stack and everything else
- *	is a mystery.
- *
- *	On entry to trampoline_data, the processor is in real mode
- *	with 16-bit addressing and 16-bit data.  CS has some value
- *	and IP is zero.  Thus, data addresses need to be absolute
- *	(no relocation) and are taken with regard to r_base.
- *
- *	With the addition of trampoline_level4_pgt this code can
- *	now enter a 64bit kernel that lives at arbitrary 64bit
- *	physical addresses.
- *
- *	If you work on this file, check the object module with objdump
- *	--full-contents --reloc to make sure there are no relocation
- *	entries.
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/pgtable_types.h>
-#include <asm/page_types.h>
-#include <asm/msr.h>
-#include <asm/segment.h>
-#include <asm/processor-flags.h>
-
-	.section ".x86_trampoline","a"
-	.balign PAGE_SIZE
-	.code16
-
-ENTRY(trampoline_data)
-r_base = .
-	cli			# We should be safe anyway
-	wbinvd
-	mov	%cs, %ax	# Code and data in the same place
-	mov	%ax, %ds
-	mov	%ax, %es
-	mov	%ax, %ss
-
-
-	movl	$0xA5A5A5A5, trampoline_status - r_base
-				# write marker for master knows we're running
-
-					# Setup stack
-	movw	$(trampoline_stack_end - r_base), %sp
-
-	call	verify_cpu		# Verify the cpu supports long mode
-	testl   %eax, %eax		# Check for return code
-	jnz	no_longmode
-
-	mov	%cs, %ax
-	movzx	%ax, %esi		# Find the 32bit trampoline location
-	shll	$4, %esi
-
-					# Fixup the absolute vectors
-	leal	(startup_32 - r_base)(%esi), %eax
-	movl	%eax, startup_32_vector - r_base
-	leal	(startup_64 - r_base)(%esi), %eax
-	movl	%eax, startup_64_vector - r_base
-	leal	(tgdt - r_base)(%esi), %eax
-	movl	%eax, (tgdt + 2 - r_base)
-
-	/*
-	 * GDT tables in non default location kernel can be beyond 16MB and
-	 * lgdt will not be able to load the address as in real mode default
-	 * operand size is 16bit. Use lgdtl instead to force operand size
-	 * to 32 bit.
-	 */
-
-	lidtl	tidt - r_base	# load idt with 0, 0
-	lgdtl	tgdt - r_base	# load gdt with whatever is appropriate
-
-	mov	$X86_CR0_PE, %ax	# protected mode (PE) bit
-	lmsw	%ax			# into protected mode
-
-	# flush prefetch and jump to startup_32
-	ljmpl	*(startup_32_vector - r_base)
-
-	.code32
-	.balign 4
-startup_32:
-	movl	$__KERNEL_DS, %eax	# Initialize the %ds segment register
-	movl	%eax, %ds
-
-	movl	$X86_CR4_PAE, %eax
-	movl	%eax, %cr4		# Enable PAE mode
-
-					# Setup trampoline 4 level pagetables
-	leal	(trampoline_level4_pgt - r_base)(%esi), %eax
-	movl	%eax, %cr3
-
-	movl	$MSR_EFER, %ecx
-	movl	$(1 << _EFER_LME), %eax	# Enable Long Mode
-	xorl	%edx, %edx
-	wrmsr
-
-	# Enable paging and in turn activate Long Mode
-	# Enable protected mode
-	movl	$(X86_CR0_PG | X86_CR0_PE), %eax
-	movl	%eax, %cr0
-
-	/*
-	 * At this point we're in long mode but in 32bit compatibility mode
-	 * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
-	 * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use
-	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
-	 */
-	ljmp	*(startup_64_vector - r_base)(%esi)
-
-	.code64
-	.balign 4
-startup_64:
-	# Now jump into the kernel using virtual addresses
-	movq	$secondary_startup_64, %rax
-	jmp	*%rax
-
-	.code16
-no_longmode:
-	hlt
-	jmp no_longmode
-#include "verify_cpu.S"
-
-	.balign 4
-	# Careful these need to be in the same 64K segment as the above;
-tidt:
-	.word	0			# idt limit = 0
-	.word	0, 0			# idt base = 0L
-
-	# Duplicate the global descriptor table
-	# so the kernel can live anywhere
-	.balign 4
-tgdt:
-	.short	tgdt_end - tgdt		# gdt limit
-	.long	tgdt - r_base
-	.short 0
-	.quad	0x00cf9b000000ffff	# __KERNEL32_CS
-	.quad	0x00af9b000000ffff	# __KERNEL_CS
-	.quad	0x00cf93000000ffff	# __KERNEL_DS
-tgdt_end:
-
-	.balign 4
-startup_32_vector:
-	.long	startup_32 - r_base
-	.word	__KERNEL32_CS, 0
-
-	.balign 4
-startup_64_vector:
-	.long	startup_64 - r_base
-	.word	__KERNEL_CS, 0
-
-	.balign 4
-ENTRY(trampoline_status)
-	.long	0
-
-trampoline_stack:
-	.org 0x1000
-trampoline_stack_end:
-ENTRY(trampoline_level4_pgt)
-	.quad	level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
-	.fill	510,8,0
-	.quad	level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
-
-ENTRY(trampoline_end)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index ff9281f1..05b31d9 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -37,10 +37,6 @@
 #include <linux/eisa.h>
 #endif
 
-#ifdef CONFIG_MCA
-#include <linux/mca.h>
-#endif
-
 #if defined(CONFIG_EDAC)
 #include <linux/edac.h>
 #endif
@@ -50,6 +46,7 @@
 #include <asm/processor.h>
 #include <asm/debugreg.h>
 #include <linux/atomic.h>
+#include <asm/ftrace.h>
 #include <asm/traps.h>
 #include <asm/desc.h>
 #include <asm/i387.h>
@@ -303,8 +300,17 @@ gp_in_kernel:
 }
 
 /* May run on IST stack. */
-dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
+dotraplinkage void __kprobes notrace do_int3(struct pt_regs *regs, long error_code)
 {
+#ifdef CONFIG_DYNAMIC_FTRACE
+	/*
+	 * ftrace must be first, everything else may cause a recursive crash.
+	 * See note by declaration of modifying_ftrace_code in ftrace.c
+	 */
+	if (unlikely(atomic_read(&modifying_ftrace_code)) &&
+	    ftrace_int3_handler(regs))
+		return;
+#endif
 #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
 	if (kgdb_ll_trap(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
 				SIGTRAP) == NOTIFY_STOP)
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
new file mode 100644
index 0000000..dc4e910
--- /dev/null
+++ b/arch/x86/kernel/uprobes.c
@@ -0,0 +1,674 @@
+/*
+ * User-space Probes (UProbes) for x86
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2008-2011
+ * Authors:
+ *	Srikar Dronamraju
+ *	Jim Keniston
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/uprobes.h>
+#include <linux/uaccess.h>
+
+#include <linux/kdebug.h>
+#include <asm/processor.h>
+#include <asm/insn.h>
+
+/* Post-execution fixups. */
+
+/* No fixup needed */
+#define UPROBE_FIX_NONE		0x0
+
+/* Adjust IP back to vicinity of actual insn */
+#define UPROBE_FIX_IP		0x1
+
+/* Adjust the return address of a call insn */
+#define UPROBE_FIX_CALL	0x2
+
+#define UPROBE_FIX_RIP_AX	0x8000
+#define UPROBE_FIX_RIP_CX	0x4000
+
+#define	UPROBE_TRAP_NR		UINT_MAX
+
+/* Adaptations for mhiramat x86 decoder v14. */
+#define OPCODE1(insn)		((insn)->opcode.bytes[0])
+#define OPCODE2(insn)		((insn)->opcode.bytes[1])
+#define OPCODE3(insn)		((insn)->opcode.bytes[2])
+#define MODRM_REG(insn)		X86_MODRM_REG(insn->modrm.value)
+
+#define W(row, b0, b1, b2, b3, b4, b5, b6, b7, b8, b9, ba, bb, bc, bd, be, bf)\
+	(((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) |   \
+	  (b4##UL << 0x4)|(b5##UL << 0x5)|(b6##UL << 0x6)|(b7##UL << 0x7) |   \
+	  (b8##UL << 0x8)|(b9##UL << 0x9)|(ba##UL << 0xa)|(bb##UL << 0xb) |   \
+	  (bc##UL << 0xc)|(bd##UL << 0xd)|(be##UL << 0xe)|(bf##UL << 0xf))    \
+	 << (row % 32))
+
+/*
+ * Good-instruction tables for 32-bit apps.  This is non-const and volatile
+ * to keep gcc from statically optimizing it out, as variable_test_bit makes
+ * some versions of gcc to think only *(unsigned long*) is used.
+ */
+static volatile u32 good_insns_32[256 / 32] = {
+	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f         */
+	/*      ----------------------------------------------         */
+	W(0x00, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) | /* 00 */
+	W(0x10, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0) , /* 10 */
+	W(0x20, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0, 1) | /* 20 */
+	W(0x30, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 0, 1) , /* 30 */
+	W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
+	W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
+	W(0x60, 1, 1, 1, 0, 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
+	W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 70 */
+	W(0x80, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
+	W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
+	W(0xa0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* a0 */
+	W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
+	W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* c0 */
+	W(0xd0, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
+	W(0xe0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* e0 */
+	W(0xf0, 0, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1)   /* f0 */
+	/*      ----------------------------------------------         */
+	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f         */
+};
+
+/* Using this for both 64-bit and 32-bit apps */
+static volatile u32 good_2byte_insns[256 / 32] = {
+	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f         */
+	/*      ----------------------------------------------         */
+	W(0x00, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1) | /* 00 */
+	W(0x10, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1) , /* 10 */
+	W(0x20, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1) | /* 20 */
+	W(0x30, 0, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) , /* 30 */
+	W(0x40, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 40 */
+	W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
+	W(0x60, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 60 */
+	W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 1, 1) , /* 70 */
+	W(0x80, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
+	W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
+	W(0xa0, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 1) | /* a0 */
+	W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
+	W(0xc0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* c0 */
+	W(0xd0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
+	W(0xe0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* e0 */
+	W(0xf0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0)   /* f0 */
+	/*      ----------------------------------------------         */
+	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f         */
+};
+
+#ifdef CONFIG_X86_64
+/* Good-instruction tables for 64-bit apps */
+static volatile u32 good_insns_64[256 / 32] = {
+	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f         */
+	/*      ----------------------------------------------         */
+	W(0x00, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) | /* 00 */
+	W(0x10, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) , /* 10 */
+	W(0x20, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) | /* 20 */
+	W(0x30, 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0) , /* 30 */
+	W(0x40, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0) | /* 40 */
+	W(0x50, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 50 */
+	W(0x60, 0, 0, 0, 1, 1, 1, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* 60 */
+	W(0x70, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 70 */
+	W(0x80, 1, 1, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* 80 */
+	W(0x90, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* 90 */
+	W(0xa0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) | /* a0 */
+	W(0xb0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* b0 */
+	W(0xc0, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0) | /* c0 */
+	W(0xd0, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1) , /* d0 */
+	W(0xe0, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, 1, 1, 0, 0, 0, 0) | /* e0 */
+	W(0xf0, 0, 0, 1, 1, 0, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1, 1)   /* f0 */
+	/*      ----------------------------------------------         */
+	/*      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f         */
+};
+#endif
+#undef W
+
+/*
+ * opcodes we'll probably never support:
+ *
+ *  6c-6d, e4-e5, ec-ed - in
+ *  6e-6f, e6-e7, ee-ef - out
+ *  cc, cd - int3, int
+ *  cf - iret
+ *  d6 - illegal instruction
+ *  f1 - int1/icebp
+ *  f4 - hlt
+ *  fa, fb - cli, sti
+ *  0f - lar, lsl, syscall, clts, sysret, sysenter, sysexit, invd, wbinvd, ud2
+ *
+ * invalid opcodes in 64-bit mode:
+ *
+ *  06, 0e, 16, 1e, 27, 2f, 37, 3f, 60-62, 82, c4-c5, d4-d5
+ *  63 - we support this opcode in x86_64 but not in i386.
+ *
+ * opcodes we may need to refine support for:
+ *
+ *  0f - 2-byte instructions: For many of these instructions, the validity
+ *  depends on the prefix and/or the reg field.  On such instructions, we
+ *  just consider the opcode combination valid if it corresponds to any
+ *  valid instruction.
+ *
+ *  8f - Group 1 - only reg = 0 is OK
+ *  c6-c7 - Group 11 - only reg = 0 is OK
+ *  d9-df - fpu insns with some illegal encodings
+ *  f2, f3 - repnz, repz prefixes.  These are also the first byte for
+ *  certain floating-point instructions, such as addsd.
+ *
+ *  fe - Group 4 - only reg = 0 or 1 is OK
+ *  ff - Group 5 - only reg = 0-6 is OK
+ *
+ * others -- Do we need to support these?
+ *
+ *  0f - (floating-point?) prefetch instructions
+ *  07, 17, 1f - pop es, pop ss, pop ds
+ *  26, 2e, 36, 3e - es:, cs:, ss:, ds: segment prefixes --
+ *	but 64 and 65 (fs: and gs:) seem to be used, so we support them
+ *  67 - addr16 prefix
+ *  ce - into
+ *  f0 - lock prefix
+ */
+
+/*
+ * TODO:
+ * - Where necessary, examine the modrm byte and allow only valid instructions
+ * in the different Groups and fpu instructions.
+ */
+
+static bool is_prefix_bad(struct insn *insn)
+{
+	int i;
+
+	for (i = 0; i < insn->prefixes.nbytes; i++) {
+		switch (insn->prefixes.bytes[i]) {
+		case 0x26:	/* INAT_PFX_ES   */
+		case 0x2E:	/* INAT_PFX_CS   */
+		case 0x36:	/* INAT_PFX_DS   */
+		case 0x3E:	/* INAT_PFX_SS   */
+		case 0xF0:	/* INAT_PFX_LOCK */
+			return true;
+		}
+	}
+	return false;
+}
+
+static int validate_insn_32bits(struct arch_uprobe *auprobe, struct insn *insn)
+{
+	insn_init(insn, auprobe->insn, false);
+
+	/* Skip good instruction prefixes; reject "bad" ones. */
+	insn_get_opcode(insn);
+	if (is_prefix_bad(insn))
+		return -ENOTSUPP;
+
+	if (test_bit(OPCODE1(insn), (unsigned long *)good_insns_32))
+		return 0;
+
+	if (insn->opcode.nbytes == 2) {
+		if (test_bit(OPCODE2(insn), (unsigned long *)good_2byte_insns))
+			return 0;
+	}
+
+	return -ENOTSUPP;
+}
+
+/*
+ * Figure out which fixups arch_uprobe_post_xol() will need to perform, and
+ * annotate arch_uprobe->fixups accordingly.  To start with,
+ * arch_uprobe->fixups is either zero or it reflects rip-related fixups.
+ */
+static void prepare_fixups(struct arch_uprobe *auprobe, struct insn *insn)
+{
+	bool fix_ip = true, fix_call = false;	/* defaults */
+	int reg;
+
+	insn_get_opcode(insn);	/* should be a nop */
+
+	switch (OPCODE1(insn)) {
+	case 0xc3:		/* ret/lret */
+	case 0xcb:
+	case 0xc2:
+	case 0xca:
+		/* ip is correct */
+		fix_ip = false;
+		break;
+	case 0xe8:		/* call relative - Fix return addr */
+		fix_call = true;
+		break;
+	case 0x9a:		/* call absolute - Fix return addr, not ip */
+		fix_call = true;
+		fix_ip = false;
+		break;
+	case 0xff:
+		insn_get_modrm(insn);
+		reg = MODRM_REG(insn);
+		if (reg == 2 || reg == 3) {
+			/* call or lcall, indirect */
+			/* Fix return addr; ip is correct. */
+			fix_call = true;
+			fix_ip = false;
+		} else if (reg == 4 || reg == 5) {
+			/* jmp or ljmp, indirect */
+			/* ip is correct. */
+			fix_ip = false;
+		}
+		break;
+	case 0xea:		/* jmp absolute -- ip is correct */
+		fix_ip = false;
+		break;
+	default:
+		break;
+	}
+	if (fix_ip)
+		auprobe->fixups |= UPROBE_FIX_IP;
+	if (fix_call)
+		auprobe->fixups |= UPROBE_FIX_CALL;
+}
+
+#ifdef CONFIG_X86_64
+/*
+ * If arch_uprobe->insn doesn't use rip-relative addressing, return
+ * immediately.  Otherwise, rewrite the instruction so that it accesses
+ * its memory operand indirectly through a scratch register.  Set
+ * arch_uprobe->fixups and arch_uprobe->rip_rela_target_address
+ * accordingly.  (The contents of the scratch register will be saved
+ * before we single-step the modified instruction, and restored
+ * afterward.)
+ *
+ * We do this because a rip-relative instruction can access only a
+ * relatively small area (+/- 2 GB from the instruction), and the XOL
+ * area typically lies beyond that area.  At least for instructions
+ * that store to memory, we can't execute the original instruction
+ * and "fix things up" later, because the misdirected store could be
+ * disastrous.
+ *
+ * Some useful facts about rip-relative instructions:
+ *
+ *  - There's always a modrm byte.
+ *  - There's never a SIB byte.
+ *  - The displacement is always 4 bytes.
+ */
+static void
+handle_riprel_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn)
+{
+	u8 *cursor;
+	u8 reg;
+
+	if (mm->context.ia32_compat)
+		return;
+
+	auprobe->rip_rela_target_address = 0x0;
+	if (!insn_rip_relative(insn))
+		return;
+
+	/*
+	 * insn_rip_relative() would have decoded rex_prefix, modrm.
+	 * Clear REX.b bit (extension of MODRM.rm field):
+	 * we want to encode rax/rcx, not r8/r9.
+	 */
+	if (insn->rex_prefix.nbytes) {
+		cursor = auprobe->insn + insn_offset_rex_prefix(insn);
+		*cursor &= 0xfe;	/* Clearing REX.B bit */
+	}
+
+	/*
+	 * Point cursor at the modrm byte.  The next 4 bytes are the
+	 * displacement.  Beyond the displacement, for some instructions,
+	 * is the immediate operand.
+	 */
+	cursor = auprobe->insn + insn_offset_modrm(insn);
+	insn_get_length(insn);
+
+	/*
+	 * Convert from rip-relative addressing to indirect addressing
+	 * via a scratch register.  Change the r/m field from 0x5 (%rip)
+	 * to 0x0 (%rax) or 0x1 (%rcx), and squeeze out the offset field.
+	 */
+	reg = MODRM_REG(insn);
+	if (reg == 0) {
+		/*
+		 * The register operand (if any) is either the A register
+		 * (%rax, %eax, etc.) or (if the 0x4 bit is set in the
+		 * REX prefix) %r8.  In any case, we know the C register
+		 * is NOT the register operand, so we use %rcx (register
+		 * #1) for the scratch register.
+		 */
+		auprobe->fixups = UPROBE_FIX_RIP_CX;
+		/* Change modrm from 00 000 101 to 00 000 001. */
+		*cursor = 0x1;
+	} else {
+		/* Use %rax (register #0) for the scratch register. */
+		auprobe->fixups = UPROBE_FIX_RIP_AX;
+		/* Change modrm from 00 xxx 101 to 00 xxx 000 */
+		*cursor = (reg << 3);
+	}
+
+	/* Target address = address of next instruction + (signed) offset */
+	auprobe->rip_rela_target_address = (long)insn->length + insn->displacement.value;
+
+	/* Displacement field is gone; slide immediate field (if any) over. */
+	if (insn->immediate.nbytes) {
+		cursor++;
+		memmove(cursor, cursor + insn->displacement.nbytes, insn->immediate.nbytes);
+	}
+	return;
+}
+
+static int validate_insn_64bits(struct arch_uprobe *auprobe, struct insn *insn)
+{
+	insn_init(insn, auprobe->insn, true);
+
+	/* Skip good instruction prefixes; reject "bad" ones. */
+	insn_get_opcode(insn);
+	if (is_prefix_bad(insn))
+		return -ENOTSUPP;
+
+	if (test_bit(OPCODE1(insn), (unsigned long *)good_insns_64))
+		return 0;
+
+	if (insn->opcode.nbytes == 2) {
+		if (test_bit(OPCODE2(insn), (unsigned long *)good_2byte_insns))
+			return 0;
+	}
+	return -ENOTSUPP;
+}
+
+static int validate_insn_bits(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn)
+{
+	if (mm->context.ia32_compat)
+		return validate_insn_32bits(auprobe, insn);
+	return validate_insn_64bits(auprobe, insn);
+}
+#else /* 32-bit: */
+static void handle_riprel_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn)
+{
+	/* No RIP-relative addressing on 32-bit */
+}
+
+static int validate_insn_bits(struct arch_uprobe *auprobe, struct mm_struct *mm,  struct insn *insn)
+{
+	return validate_insn_32bits(auprobe, insn);
+}
+#endif /* CONFIG_X86_64 */
+
+/**
+ * arch_uprobe_analyze_insn - instruction analysis including validity and fixups.
+ * @mm: the probed address space.
+ * @arch_uprobe: the probepoint information.
+ * Return 0 on success or a -ve number on error.
+ */
+int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm)
+{
+	int ret;
+	struct insn insn;
+
+	auprobe->fixups = 0;
+	ret = validate_insn_bits(auprobe, mm, &insn);
+	if (ret != 0)
+		return ret;
+
+	handle_riprel_insn(auprobe, mm, &insn);
+	prepare_fixups(auprobe, &insn);
+
+	return 0;
+}
+
+#ifdef CONFIG_X86_64
+/*
+ * If we're emulating a rip-relative instruction, save the contents
+ * of the scratch register and store the target address in that register.
+ */
+static void
+pre_xol_rip_insn(struct arch_uprobe *auprobe, struct pt_regs *regs,
+				struct arch_uprobe_task *autask)
+{
+	if (auprobe->fixups & UPROBE_FIX_RIP_AX) {
+		autask->saved_scratch_register = regs->ax;
+		regs->ax = current->utask->vaddr;
+		regs->ax += auprobe->rip_rela_target_address;
+	} else if (auprobe->fixups & UPROBE_FIX_RIP_CX) {
+		autask->saved_scratch_register = regs->cx;
+		regs->cx = current->utask->vaddr;
+		regs->cx += auprobe->rip_rela_target_address;
+	}
+}
+#else
+static void
+pre_xol_rip_insn(struct arch_uprobe *auprobe, struct pt_regs *regs,
+				struct arch_uprobe_task *autask)
+{
+	/* No RIP-relative addressing on 32-bit */
+}
+#endif
+
+/*
+ * arch_uprobe_pre_xol - prepare to execute out of line.
+ * @auprobe: the probepoint information.
+ * @regs: reflects the saved user state of current task.
+ */
+int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct arch_uprobe_task *autask;
+
+	autask = &current->utask->autask;
+	autask->saved_trap_nr = current->thread.trap_nr;
+	current->thread.trap_nr = UPROBE_TRAP_NR;
+	regs->ip = current->utask->xol_vaddr;
+	pre_xol_rip_insn(auprobe, regs, autask);
+
+	return 0;
+}
+
+/*
+ * This function is called by arch_uprobe_post_xol() to adjust the return
+ * address pushed by a call instruction executed out of line.
+ */
+static int adjust_ret_addr(unsigned long sp, long correction)
+{
+	int rasize, ncopied;
+	long ra = 0;
+
+	if (is_ia32_task())
+		rasize = 4;
+	else
+		rasize = 8;
+
+	ncopied = copy_from_user(&ra, (void __user *)sp, rasize);
+	if (unlikely(ncopied))
+		return -EFAULT;
+
+	ra += correction;
+	ncopied = copy_to_user((void __user *)sp, &ra, rasize);
+	if (unlikely(ncopied))
+		return -EFAULT;
+
+	return 0;
+}
+
+#ifdef CONFIG_X86_64
+static bool is_riprel_insn(struct arch_uprobe *auprobe)
+{
+	return ((auprobe->fixups & (UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX)) != 0);
+}
+
+static void
+handle_riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs, long *correction)
+{
+	if (is_riprel_insn(auprobe)) {
+		struct arch_uprobe_task *autask;
+
+		autask = &current->utask->autask;
+		if (auprobe->fixups & UPROBE_FIX_RIP_AX)
+			regs->ax = autask->saved_scratch_register;
+		else
+			regs->cx = autask->saved_scratch_register;
+
+		/*
+		 * The original instruction includes a displacement, and so
+		 * is 4 bytes longer than what we've just single-stepped.
+		 * Fall through to handle stuff like "jmpq *...(%rip)" and
+		 * "callq *...(%rip)".
+		 */
+		if (correction)
+			*correction += 4;
+	}
+}
+#else
+static void
+handle_riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs, long *correction)
+{
+	/* No RIP-relative addressing on 32-bit */
+}
+#endif
+
+/*
+ * If xol insn itself traps and generates a signal(Say,
+ * SIGILL/SIGSEGV/etc), then detect the case where a singlestepped
+ * instruction jumps back to its own address. It is assumed that anything
+ * like do_page_fault/do_trap/etc sets thread.trap_nr != -1.
+ *
+ * arch_uprobe_pre_xol/arch_uprobe_post_xol save/restore thread.trap_nr,
+ * arch_uprobe_xol_was_trapped() simply checks that ->trap_nr is not equal to
+ * UPROBE_TRAP_NR == -1 set by arch_uprobe_pre_xol().
+ */
+bool arch_uprobe_xol_was_trapped(struct task_struct *t)
+{
+	if (t->thread.trap_nr != UPROBE_TRAP_NR)
+		return true;
+
+	return false;
+}
+
+/*
+ * Called after single-stepping. To avoid the SMP problems that can
+ * occur when we temporarily put back the original opcode to
+ * single-step, we single-stepped a copy of the instruction.
+ *
+ * This function prepares to resume execution after the single-step.
+ * We have to fix things up as follows:
+ *
+ * Typically, the new ip is relative to the copied instruction.  We need
+ * to make it relative to the original instruction (FIX_IP).  Exceptions
+ * are return instructions and absolute or indirect jump or call instructions.
+ *
+ * If the single-stepped instruction was a call, the return address that
+ * is atop the stack is the address following the copied instruction.  We
+ * need to make it the address following the original instruction (FIX_CALL).
+ *
+ * If the original instruction was a rip-relative instruction such as
+ * "movl %edx,0xnnnn(%rip)", we have instead executed an equivalent
+ * instruction using a scratch register -- e.g., "movl %edx,(%rax)".
+ * We need to restore the contents of the scratch register and adjust
+ * the ip, keeping in mind that the instruction we executed is 4 bytes
+ * shorter than the original instruction (since we squeezed out the offset
+ * field).  (FIX_RIP_AX or FIX_RIP_CX)
+ */
+int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask;
+	long correction;
+	int result = 0;
+
+	WARN_ON_ONCE(current->thread.trap_nr != UPROBE_TRAP_NR);
+
+	utask = current->utask;
+	current->thread.trap_nr = utask->autask.saved_trap_nr;
+	correction = (long)(utask->vaddr - utask->xol_vaddr);
+	handle_riprel_post_xol(auprobe, regs, &correction);
+	if (auprobe->fixups & UPROBE_FIX_IP)
+		regs->ip += correction;
+
+	if (auprobe->fixups & UPROBE_FIX_CALL)
+		result = adjust_ret_addr(regs->sp, correction);
+
+	return result;
+}
+
+/* callback routine for handling exceptions. */
+int arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data)
+{
+	struct die_args *args = data;
+	struct pt_regs *regs = args->regs;
+	int ret = NOTIFY_DONE;
+
+	/* We are only interested in userspace traps */
+	if (regs && !user_mode_vm(regs))
+		return NOTIFY_DONE;
+
+	switch (val) {
+	case DIE_INT3:
+		if (uprobe_pre_sstep_notifier(regs))
+			ret = NOTIFY_STOP;
+
+		break;
+
+	case DIE_DEBUG:
+		if (uprobe_post_sstep_notifier(regs))
+			ret = NOTIFY_STOP;
+
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * This function gets called when XOL instruction either gets trapped or
+ * the thread has a fatal signal, so reset the instruction pointer to its
+ * probed address.
+ */
+void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	struct uprobe_task *utask = current->utask;
+
+	current->thread.trap_nr = utask->autask.saved_trap_nr;
+	handle_riprel_post_xol(auprobe, regs, NULL);
+	instruction_pointer_set(regs, utask->vaddr);
+}
+
+/*
+ * Skip these instructions as per the currently known x86 ISA.
+ * 0x66* { 0x90 | 0x0f 0x1f | 0x0f 0x19 | 0x87 0xc0 }
+ */
+bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+	int i;
+
+	for (i = 0; i < MAX_UINSN_BYTES; i++) {
+		if ((auprobe->insn[i] == 0x66))
+			continue;
+
+		if (auprobe->insn[i] == 0x90)
+			return true;
+
+		if (i == (MAX_UINSN_BYTES - 1))
+			break;
+
+		if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x1f))
+			return true;
+
+		if ((auprobe->insn[i] == 0x0f) && (auprobe->insn[i+1] == 0x19))
+			return true;
+
+		if ((auprobe->insn[i] == 0x87) && (auprobe->insn[i+1] == 0xc0))
+			return true;
+
+		break;
+	}
+	return false;
+}
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 0f703f1..22a1530 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -197,18 +197,6 @@ SECTIONS
 
 	INIT_DATA_SECTION(16)
 
-	/*
-	 * Code and data for a variety of lowlevel trampolines, to be
-	 * copied into base memory (< 1 MiB) during initialization.
-	 * Since it is copied early, the main copy can be discarded
-	 * afterwards.
-	 */
-	 .x86_trampoline : AT(ADDR(.x86_trampoline) - LOAD_OFFSET) {
-		x86_trampoline_start = .;
-		*(.x86_trampoline)
-		x86_trampoline_end = .;
-	}
-
 	.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
 		__x86_cpu_dev_start = .;
 		*(.x86_cpu_dev.init)
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index a1d804b..8eeb55a 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci_ids.h>
 #include <linux/pci_regs.h>
+#include <linux/smp.h>
 
 #include <asm/apic.h>
 #include <asm/pci-direct.h>
@@ -22,6 +23,8 @@
 #include <asm/paravirt.h>
 #include <asm/setup.h>
 
+#define TOPOLOGY_REGISTER_OFFSET 0x10
+
 #if defined CONFIG_PCI && defined CONFIG_PARAVIRT
 /*
  * Interrupt control on vSMPowered systems:
@@ -149,12 +152,49 @@ int is_vsmp_box(void)
 	return 0;
 }
 #endif
+
+static void __init vsmp_cap_cpus(void)
+{
+#if !defined(CONFIG_X86_VSMP) && defined(CONFIG_SMP)
+	void __iomem *address;
+	unsigned int cfg, topology, node_shift, maxcpus;
+
+	/*
+	 * CONFIG_X86_VSMP is not configured, so limit the number CPUs to the
+	 * ones present in the first board, unless explicitly overridden by
+	 * setup_max_cpus
+	 */
+	if (setup_max_cpus != NR_CPUS)
+		return;
+
+	/* Read the vSMP Foundation topology register */
+	cfg = read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0);
+	address = early_ioremap(cfg + TOPOLOGY_REGISTER_OFFSET, 4);
+	if (WARN_ON(!address))
+		return;
+
+	topology = readl(address);
+	node_shift = (topology >> 16) & 0x7;
+	if (!node_shift)
+		/* The value 0 should be decoded as 8 */
+		node_shift = 8;
+	maxcpus = (topology & ((1 << node_shift) - 1)) + 1;
+
+	pr_info("vSMP CTL: Capping CPUs to %d (CONFIG_X86_VSMP is unset)\n",
+		maxcpus);
+	setup_max_cpus = maxcpus;
+	early_iounmap(address, 4);
+#endif
+}
+
 void __init vsmp_init(void)
 {
 	detect_vsmp_box();
 	if (!is_vsmp_box())
 		return;
 
+	vsmp_cap_cpus();
+
 	set_vsmp_pv_ops();
 	return;
 }
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index e9f265f..35c5e54 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -18,6 +18,7 @@
 #include <asm/e820.h>
 #include <asm/time.h>
 #include <asm/irq.h>
+#include <asm/io_apic.h>
 #include <asm/pat.h>
 #include <asm/tsc.h>
 #include <asm/iommu.h>
@@ -93,7 +94,6 @@ struct x86_init_ops x86_init __initdata = {
 struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = {
 	.early_percpu_clock_init	= x86_init_noop,
 	.setup_percpu_clockev		= setup_secondary_APIC_clock,
-	.fixup_cpu_id			= x86_default_fixup_cpu_id,
 };
 
 static void default_nmi_init(void) { };
@@ -120,3 +120,10 @@ struct x86_msi_ops x86_msi = {
 	.teardown_msi_irqs = default_teardown_msi_irqs,
 	.restore_msi_irqs = default_restore_msi_irqs,
 };
+
+struct x86_io_apic_ops x86_io_apic_ops = {
+	.init	= native_io_apic_init_mappings,
+	.read	= native_io_apic_read,
+	.write	= native_io_apic_write,
+	.modify	= native_io_apic_modify,
+};
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index e62728e..bd18149 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -48,8 +48,6 @@ void __sanitize_i387_state(struct task_struct *tsk)
 	if (!fx)
 		return;
 
-	BUG_ON(__thread_has_fpu(tsk));
-
 	xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv;
 
 	/*