diff options
| author | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2013-04-28 02:10:46 +0200 |
|---|---|---|
| committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2013-04-28 02:10:46 +0200 |
| commit | 885f925eef411f549f17bc64dd054a3269cf66cd (patch) | |
| tree | 6bac783d573a51e497ad28c19b5a71defac85f39 /arch | |
| parent | e4f5a3adc454745fea35f1c312e14cbeba6e0ea4 (diff) | |
| parent | 45c009a9a447655aecbdb06c86126f05d0272171 (diff) | |
| download | kernel_goldelico_gta04-885f925eef411f549f17bc64dd054a3269cf66cd.zip kernel_goldelico_gta04-885f925eef411f549f17bc64dd054a3269cf66cd.tar.gz kernel_goldelico_gta04-885f925eef411f549f17bc64dd054a3269cf66cd.tar.bz2 | |
Merge branch 'pm-cpufreq'
* pm-cpufreq: (57 commits)
cpufreq: MAINTAINERS: Add co-maintainer
cpufreq: pxa2xx: initialize variables
ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
cpufreq: cpu0: Put cpu parent node after using it
cpufreq: ARM big LITTLE: Adapt to latest cpufreq updates
cpufreq: ARM big LITTLE: put DT nodes after using them
cpufreq: Don't call __cpufreq_governor() for drivers without target()
cpufreq: exynos5440: Protect OPP search calls with RCU lock
cpufreq: dbx500: Round to closest available freq
cpufreq: Call __cpufreq_governor() with correct policy->cpus mask
cpufreq / intel_pstate: Optimize intel_pstate_set_policy
cpufreq: OMAP: instantiate omap-cpufreq as a platform_driver
arm: exynos: Enable OPP library support for exynos5440
cpufreq: exynos: Remove error return even if no soc is found
cpufreq: exynos: Add cpufreq driver for exynos5440
cpufreq: AMD "frequency sensitivity feedback" powersave bias for ondemand governor
cpufreq: ondemand: allow custom powersave_bias_target handler to be registered
cpufreq: convert cpufreq_driver to using RCU
cpufreq: powerpc/platforms/cell: move cpufreq driver to drivers/cpufreq
cpufreq: sparc: move cpufreq driver to drivers/cpufreq
...
Conflicts:
MAINTAINERS (with commit a8e39c3 from pm-cpuidle)
drivers/cpufreq/cpufreq_governor.h (with commit beb0ff3)
Diffstat (limited to 'arch')
73 files changed, 70 insertions, 5295 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1cacda4..cdb8322 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2160,7 +2160,6 @@ endmenu menu "CPU Power Management" if ARCH_HAS_CPUFREQ - source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX @@ -2170,30 +2169,6 @@ config CPU_FREQ_IMX help This enables the CPUfreq driver for i.MX CPUs. -config CPU_FREQ_SA1100 - bool - -config CPU_FREQ_SA1110 - bool - -config CPU_FREQ_INTEGRATOR - tristate "CPUfreq driver for ARM Integrator CPUs" - depends on ARCH_INTEGRATOR && CPU_FREQ - default y - help - This enables the CPUfreq driver for ARM Integrator CPUs. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say Y. - -config CPU_FREQ_PXA - bool - depends on CPU_FREQ && ARCH_PXA && PXA25x - default y - select CPU_FREQ_DEFAULT_GOV_USERSPACE - select CPU_FREQ_TABLE - config CPU_FREQ_S3C bool help diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index fb5c1aa..dd1ffcc 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -37,7 +37,6 @@ obj-$(CONFIG_MACH_MITYOMAPL138) += board-mityomapl138.o obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o # Power Management -obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o obj-$(CONFIG_HAVE_CLK) += pm_domain.o diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c deleted file mode 100644 index 4729eaa..0000000 --- a/arch/arm/mach-davinci/cpufreq.c +++ /dev/null @@ -1,248 +0,0 @@ -/* - * CPU frequency scaling for DaVinci - * - * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ - * - * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows: - * - * Copyright (C) 2005 Nokia Corporation - * Written by Tony Lindgren <tony@atomide.com> - * - * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King - * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Updated to support OMAP3 - * Rajendra Nayak <rnayak@ti.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/types.h> -#include <linux/cpufreq.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/export.h> - -#include <mach/hardware.h> -#include <mach/cpufreq.h> -#include <mach/common.h> - -#include "clock.h" - -struct davinci_cpufreq { - struct device *dev; - struct clk *armclk; - struct clk *asyncclk; - unsigned long asyncrate; -}; -static struct davinci_cpufreq cpufreq; - -static int davinci_verify_speed(struct cpufreq_policy *policy) -{ - struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; - struct cpufreq_frequency_table *freq_table = pdata->freq_table; - struct clk *armclk = cpufreq.armclk; - - if (freq_table) - return cpufreq_frequency_table_verify(policy, freq_table); - - if (policy->cpu) - return -EINVAL; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000; - policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000; - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} - -static unsigned int davinci_getspeed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpufreq.armclk) / 1000; -} - -static int davinci_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - int ret = 0; - unsigned int idx; - struct cpufreq_freqs freqs; - struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; - struct clk *armclk = cpufreq.armclk; - - /* - * Ensure desired rate is within allowed range. Some govenors - * (ondemand) will just pass target_freq=0 to get the minimum. - */ - if (target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - if (target_freq > policy->cpuinfo.max_freq) - target_freq = policy->cpuinfo.max_freq; - - freqs.old = davinci_getspeed(0); - freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000; - freqs.cpu = 0; - - if (freqs.old == freqs.new) - return ret; - - dev_dbg(cpufreq.dev, "transition: %u --> %u\n", freqs.old, freqs.new); - - ret = cpufreq_frequency_table_target(policy, pdata->freq_table, - freqs.new, relation, &idx); - if (ret) - return -EINVAL; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* if moving to higher frequency, up the voltage beforehand */ - if (pdata->set_voltage && freqs.new > freqs.old) { - ret = pdata->set_voltage(idx); - if (ret) - goto out; - } - - ret = clk_set_rate(armclk, idx); - if (ret) - goto out; - - if (cpufreq.asyncclk) { - ret = clk_set_rate(cpufreq.asyncclk, cpufreq.asyncrate); - if (ret) - goto out; - } - - /* if moving to lower freq, lower the voltage after lowering freq */ - if (pdata->set_voltage && freqs.new < freqs.old) - pdata->set_voltage(idx); - -out: - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -static int davinci_cpu_init(struct cpufreq_policy *policy) -{ - int result = 0; - struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data; - struct cpufreq_frequency_table *freq_table = pdata->freq_table; - - if (policy->cpu != 0) - return -EINVAL; - - /* Finish platform specific initialization */ - if (pdata->init) { - result = pdata->init(); - if (result) - return result; - } - - policy->cur = policy->min = policy->max = davinci_getspeed(0); - - if (freq_table) { - result = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (!result) - cpufreq_frequency_table_get_attr(freq_table, - policy->cpu); - } else { - policy->cpuinfo.min_freq = policy->min; - policy->cpuinfo.max_freq = policy->max; - } - - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - policy->cur = davinci_getspeed(0); - - /* - * Time measurement across the target() function yields ~1500-1800us - * time taken with no drivers on notification list. - * Setting the latency to 2000 us to accommodate addition of drivers - * to pre/post change notification list. - */ - policy->cpuinfo.transition_latency = 2000 * 1000; - return 0; -} - -static int davinci_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *davinci_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver davinci_driver = { - .flags = CPUFREQ_STICKY, - .verify = davinci_verify_speed, - .target = davinci_target, - .get = davinci_getspeed, - .init = davinci_cpu_init, - .exit = davinci_cpu_exit, - .name = "davinci", - .attr = davinci_cpufreq_attr, -}; - -static int __init davinci_cpufreq_probe(struct platform_device *pdev) -{ - struct davinci_cpufreq_config *pdata = pdev->dev.platform_data; - struct clk *asyncclk; - - if (!pdata) - return -EINVAL; - if (!pdata->freq_table) - return -EINVAL; - - cpufreq.dev = &pdev->dev; - - cpufreq.armclk = clk_get(NULL, "arm"); - if (IS_ERR(cpufreq.armclk)) { - dev_err(cpufreq.dev, "Unable to get ARM clock\n"); - return PTR_ERR(cpufreq.armclk); - } - - asyncclk = clk_get(cpufreq.dev, "async"); - if (!IS_ERR(asyncclk)) { - cpufreq.asyncclk = asyncclk; - cpufreq.asyncrate = clk_get_rate(asyncclk); - } - - return cpufreq_register_driver(&davinci_driver); -} - -static int __exit davinci_cpufreq_remove(struct platform_device *pdev) -{ - clk_put(cpufreq.armclk); - - if (cpufreq.asyncclk) - clk_put(cpufreq.asyncclk); - - return cpufreq_unregister_driver(&davinci_driver); -} - -static struct platform_driver davinci_cpufreq_driver = { - .driver = { - .name = "cpufreq-davinci", - .owner = THIS_MODULE, - }, - .remove = __exit_p(davinci_cpufreq_remove), -}; - -int __init davinci_cpufreq_init(void) -{ - return platform_driver_probe(&davinci_cpufreq_driver, - davinci_cpufreq_probe); -} - diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 70f94c8..d5dde07 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -72,10 +72,12 @@ config SOC_EXYNOS5440 bool "SAMSUNG EXYNOS5440" default y depends on ARCH_EXYNOS5 + select ARCH_HAS_OPP select ARM_ARCH_TIMER select AUTO_ZRELADDR select PINCTRL select PINCTRL_EXYNOS5440 + select PM_OPP help Enable EXYNOS5440 SoC support diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c index d8c75c3..387dc4c 100644 --- a/arch/arm/mach-imx/cpufreq.c +++ b/arch/arm/mach-imx/cpufreq.c @@ -87,13 +87,12 @@ static int mxc_set_target(struct cpufreq_policy *policy, freqs.old = clk_get_rate(cpu_clk) / 1000; freqs.new = freq_Hz / 1000; - freqs.cpu = 0; freqs.flags = 0; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); ret = set_cpu_freq(freq_Hz); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); return ret; } @@ -145,14 +144,11 @@ static int mxc_cpufreq_init(struct cpufreq_policy *policy) imx_freq_table[i].frequency = CPUFREQ_TABLE_END; policy->cur = clk_get_rate(cpu_clk) / 1000; - policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min; - policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max; /* Manual states, that PLL stabilizes in two CLK32 periods */ policy->cpuinfo.transition_latency = 2 * NANOSECOND / CLK32_FREQ; ret = cpufreq_frequency_table_cpuinfo(policy, imx_freq_table); - if (ret < 0) { printk(KERN_ERR "%s: failed to register i.MXC CPUfreq with error code %d\n", __func__, ret); diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index 5521d18..d14d6b7 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -9,5 +9,4 @@ obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o obj-$(CONFIG_PCI) += pci_v3.o pci.o -obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c deleted file mode 100644 index 590c192..0000000 --- a/arch/arm/mach-integrator/cpu.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * linux/arch/arm/mach-integrator/cpu.c - * - * Copyright (C) 2001-2002 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * CPU support functions - */ -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/cpufreq.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/init.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include <asm/mach-types.h> -#include <asm/hardware/icst.h> - -static struct cpufreq_driver integrator_driver; - -#define CM_ID __io_address(INTEGRATOR_HDR_ID) -#define CM_OSC __io_address(INTEGRATOR_HDR_OSC) -#define CM_STAT __io_address(INTEGRATOR_HDR_STAT) -#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK) - -static const struct icst_params lclk_params = { - .ref = 24000000, - .vco_max = ICST525_VCO_MAX_5V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 8, - .vd_max = 132, - .rd_min = 24, - .rd_max = 24, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -static const struct icst_params cclk_params = { - .ref = 24000000, - .vco_max = ICST525_VCO_MAX_5V, - .vco_min = ICST525_VCO_MIN, - .vd_min = 12, - .vd_max = 160, - .rd_min = 24, - .rd_max = 24, - .s2div = icst525_s2div, - .idx2s = icst525_idx2s, -}; - -/* - * Validate the speed policy. - */ -static int integrator_verify_policy(struct cpufreq_policy *policy) -{ - struct icst_vco vco; - - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - vco = icst_hz_to_vco(&cclk_params, policy->max * 1000); - policy->max = icst_hz(&cclk_params, vco) / 1000; - - vco = icst_hz_to_vco(&cclk_params, policy->min * 1000); - policy->min = icst_hz(&cclk_params, vco) / 1000; - - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - return 0; -} - - -static int integrator_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - cpumask_t cpus_allowed; - int cpu = policy->cpu; - struct icst_vco vco; - struct cpufreq_freqs freqs; - u_int cm_osc; - - /* - * Save this threads cpus_allowed mask. - */ - cpus_allowed = current->cpus_allowed; - - /* - * Bind to the specified CPU. When this call returns, - * we should be running on the right CPU. - */ - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - BUG_ON(cpu != smp_processor_id()); - - /* get current setting */ - cm_osc = __raw_readl(CM_OSC); - - if (machine_is_integrator()) { - vco.s = (cm_osc >> 8) & 7; - } else if (machine_is_cintegrator()) { - vco.s = 1; - } - vco.v = cm_osc & 255; - vco.r = 22; - freqs.old = icst_hz(&cclk_params, vco) / 1000; - - /* icst_hz_to_vco rounds down -- so we need the next - * larger freq in case of CPUFREQ_RELATION_L. - */ - if (relation == CPUFREQ_RELATION_L) - target_freq += 999; - if (target_freq > policy->max) - target_freq = policy->max; - vco = icst_hz_to_vco(&cclk_params, target_freq * 1000); - freqs.new = icst_hz(&cclk_params, vco) / 1000; - - freqs.cpu = policy->cpu; - - if (freqs.old == freqs.new) { - set_cpus_allowed(current, cpus_allowed); - return 0; - } - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - cm_osc = __raw_readl(CM_OSC); - - if (machine_is_integrator()) { - cm_osc &= 0xfffff800; - cm_osc |= vco.s << 8; - } else if (machine_is_cintegrator()) { - cm_osc &= 0xffffff00; - } - cm_osc |= vco.v; - - __raw_writel(0xa05f, CM_LOCK); - __raw_writel(cm_osc, CM_OSC); - __raw_writel(0, CM_LOCK); - - /* - * Restore the CPUs allowed mask. - */ - set_cpus_allowed(current, cpus_allowed); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static unsigned int integrator_get(unsigned int cpu) -{ - cpumask_t cpus_allowed; - unsigned int current_freq; - u_int cm_osc; - struct icst_vco vco; - - cpus_allowed = current->cpus_allowed; - - set_cpus_allowed(current, cpumask_of_cpu(cpu)); - BUG_ON(cpu != smp_processor_id()); - - /* detect memory etc. */ - cm_osc = __raw_readl(CM_OSC); - - if (machine_is_integrator()) { - vco.s = (cm_osc >> 8) & 7; - } else { - vco.s = 1; - } - vco.v = cm_osc & 255; - vco.r = 22; - - current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */ - - set_cpus_allowed(current, cpus_allowed); - - return current_freq; -} - -static int integrator_cpufreq_init(struct cpufreq_policy *policy) -{ - - /* set default policy and cpuinfo */ - policy->cpuinfo.max_freq = 160000; - policy->cpuinfo.min_freq = 12000; - policy->cpuinfo.transition_latency = 1000000; /* 1 ms, assumed */ - policy->cur = policy->min = policy->max = integrator_get(policy->cpu); - - return 0; -} - -static struct cpufreq_driver integrator_driver = { - .verify = integrator_verify_policy, - .target = integrator_set_target, - .get = integrator_get, - .init = integrator_cpufreq_init, - .name = "integrator", -}; - -static int __init integrator_cpu_init(void) -{ - return cpufreq_register_driver(&integrator_driver); -} - -static void __exit integrator_cpu_exit(void) -{ - cpufreq_unregister_driver(&integrator_driver); -} - -MODULE_AUTHOR ("Russell M. King"); -MODULE_DESCRIPTION ("cpufreq driver for ARM Integrator CPUs"); -MODULE_LICENSE ("GPL"); - -module_init(integrator_cpu_init); -module_exit(integrator_cpu_exit); diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 673a4c1..8d15f9a 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -265,6 +265,12 @@ static void __init omap4_init_voltages(void) omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva"); } +static inline void omap_init_cpufreq(void) +{ + struct platform_device_info devinfo = { .name = "omap-cpufreq", }; + platform_device_register_full(&devinfo); +} + static int __init omap2_common_pm_init(void) { if (!of_have_populated_dt()) @@ -294,6 +300,9 @@ int __init omap2_common_pm_late_init(void) /* Smartreflex device init */ omap_devinit_smartreflex(); + + /* cpufreq dummy device instantiation */ + omap_init_cpufreq(); } #ifdef CONFIG_SUSPEND diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 12c5005..648867a 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -7,12 +7,6 @@ obj-y += clock.o devices.o generic.o irq.o \ time.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o -ifeq ($(CONFIG_CPU_FREQ),y) -obj-$(CONFIG_PXA25x) += cpufreq-pxa2xx.o -obj-$(CONFIG_PXA27x) += cpufreq-pxa2xx.o -obj-$(CONFIG_PXA3xx) += cpufreq-pxa3xx.o -endif - # Generic drivers that other drivers may depend upon # SoC-specific code diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c deleted file mode 100644 index 6a7aeab..0000000 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ /dev/null @@ -1,494 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c - * - * Copyright (C) 2002,2003 Intrinsyc Software - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * History: - * 31-Jul-2002 : Initial version [FB] - * 29-Jan-2003 : added PXA255 support [FB] - * 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.) - * - * Note: - * This driver may change the memory bus clock rate, but will not do any - * platform specific access timing changes... for example if you have flash - * memory connected to CS0, you will need to register a platform specific - * notifier which will adjust the memory access strobes to maintain a - * minimum strobe width. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/err.h> -#include <linux/regulator/consumer.h> -#include <linux/io.h> - -#include <mach/pxa2xx-regs.h> -#include <mach/smemc.h> - -#ifdef DEBUG -static unsigned int freq_debug; -module_param(freq_debug, uint, 0); -MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0"); -#else -#define freq_debug 0 -#endif - -static struct regulator *vcc_core; - -static unsigned int pxa27x_maxfreq; -module_param(pxa27x_maxfreq, uint, 0); -MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz" - "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)"); - -typedef struct { - unsigned int khz; - unsigned int membus; - unsigned int cccr; - unsigned int div2; - unsigned int cclkcfg; - int vmin; - int vmax; -} pxa_freqs_t; - -/* Define the refresh period in mSec for the SDRAM and the number of rows */ -#define SDRAM_TREF 64 /* standard 64ms SDRAM */ -static unsigned int sdram_rows; - -#define CCLKCFG_TURBO 0x1 -#define CCLKCFG_FCS 0x2 -#define CCLKCFG_HALFTURBO 0x4 -#define CCLKCFG_FASTBUS 0x8 -#define MDREFR_DB2_MASK (MDREFR_K2DB2 | MDREFR_K1DB2) -#define MDREFR_DRI_MASK 0xFFF - -#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3) -#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3) - -/* - * PXA255 definitions - */ -/* Use the run mode frequencies for the CPUFREQ_POLICY_PERFORMANCE policy */ -#define CCLKCFG CCLKCFG_TURBO | CCLKCFG_FCS - -static pxa_freqs_t pxa255_run_freqs[] = -{ - /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ - { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ - {132700, 132700, 0x123, 1, CCLKCFG, -1, -1}, /* 133, 133, 66, 66 */ - {199100, 99500, 0x141, 0, CCLKCFG, -1, -1}, /* 199, 199, 99, 99 */ - {265400, 132700, 0x143, 1, CCLKCFG, -1, -1}, /* 265, 265, 133, 66 */ - {331800, 165900, 0x145, 1, CCLKCFG, -1, -1}, /* 331, 331, 166, 83 */ - {398100, 99500, 0x161, 0, CCLKCFG, -1, -1}, /* 398, 398, 196, 99 */ -}; - -/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */ -static pxa_freqs_t pxa255_turbo_freqs[] = -{ - /* CPU MEMBUS CCCR DIV2 CCLKCFG run turbo PXbus SDRAM */ - { 99500, 99500, 0x121, 1, CCLKCFG, -1, -1}, /* 99, 99, 50, 50 */ - {199100, 99500, 0x221, 0, CCLKCFG, -1, -1}, /* 99, 199, 50, 99 */ - {298500, 99500, 0x321, 0, CCLKCFG, -1, -1}, /* 99, 287, 50, 99 */ - {298600, 99500, 0x1c1, 0, CCLKCFG, -1, -1}, /* 199, 287, 99, 99 */ - {398100, 99500, 0x241, 0, CCLKCFG, -1, -1}, /* 199, 398, 99, 99 */ -}; - -#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs) -#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs) - -static struct cpufreq_frequency_table - pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1]; -static struct cpufreq_frequency_table - pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1]; - -static unsigned int pxa255_turbo_table; -module_param(pxa255_turbo_table, uint, 0); -MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)"); - -/* - * PXA270 definitions - * - * For the PXA27x: - * Control variables are A, L, 2N for CCCR; B, HT, T for CLKCFG. - * - * A = 0 => memory controller clock from table 3-7, - * A = 1 => memory controller clock = system bus clock - * Run mode frequency = 13 MHz * L - * Turbo mode frequency = 13 MHz * L * N - * System bus frequency = 13 MHz * L / (B + 1) - * - * In CCCR: - * A = 1 - * L = 16 oscillator to run mode ratio - * 2N = 6 2 * (turbo mode to run mode ratio) - * - * In CCLKCFG: - * B = 1 Fast bus mode - * HT = 0 Half-Turbo mode - * T = 1 Turbo mode - * - * For now, just support some of the combinations in table 3-7 of - * PXA27x Processor Family Developer's Manual to simplify frequency - * change sequences. - */ -#define PXA27x_CCCR(A, L, N2) (A << 25 | N2 << 7 | L) -#define CCLKCFG2(B, HT, T) \ - (CCLKCFG_FCS | \ - ((B) ? CCLKCFG_FASTBUS : 0) | \ - ((HT) ? CCLKCFG_HALFTURBO : 0) | \ - ((T) ? CCLKCFG_TURBO : 0)) - -static pxa_freqs_t pxa27x_freqs[] = { - {104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 }, - {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 }, - {208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 }, - {312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 }, - {416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 }, - {520000, 208000, PXA27x_CCCR(1, 16, 5), 1, CCLKCFG2(1, 0, 1), 1450000, 1705000 }, - {624000, 208000, PXA27x_CCCR(1, 16, 6), 1, CCLKCFG2(1, 0, 1), 1550000, 1705000 } -}; - -#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs) -static struct cpufreq_frequency_table - pxa27x_freq_table[NUM_PXA27x_FREQS+1]; - -extern unsigned get_clk_frequency_khz(int info); - -#ifdef CONFIG_REGULATOR - -static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) -{ - int ret = 0; - int vmin, vmax; - - if (!cpu_is_pxa27x()) - return 0; - - vmin = pxa_freq->vmin; - vmax = pxa_freq->vmax; - if ((vmin == -1) || (vmax == -1)) - return 0; - - ret = regulator_set_voltage(vcc_core, vmin, vmax); - if (ret) - pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n", - vmin, vmax); - return ret; -} - -static __init void pxa_cpufreq_init_voltages(void) -{ - vcc_core = regulator_get(NULL, "vcc_core"); - if (IS_ERR(vcc_core)) { - pr_info("cpufreq: Didn't find vcc_core regulator\n"); - vcc_core = NULL; - } else { - pr_info("cpufreq: Found vcc_core regulator\n"); - } -} -#else -static int pxa_cpufreq_change_voltage(pxa_freqs_t *pxa_freq) -{ - return 0; -} - -static __init void pxa_cpufreq_init_voltages(void) { } -#endif - -static void find_freq_tables(struct cpufreq_frequency_table **freq_table, - pxa_freqs_t **pxa_freqs) -{ - if (cpu_is_pxa25x()) { - if (!pxa255_turbo_table) { - *pxa_freqs = pxa255_run_freqs; - *freq_table = pxa255_run_freq_table; - } else { - *pxa_freqs = pxa255_turbo_freqs; - *freq_table = pxa255_turbo_freq_table; - } - } - if (cpu_is_pxa27x()) { - *pxa_freqs = pxa27x_freqs; - *freq_table = pxa27x_freq_table; - } -} - -static void pxa27x_guess_max_freq(void) -{ - if (!pxa27x_maxfreq) { - pxa27x_maxfreq = 416000; - printk(KERN_INFO "PXA CPU 27x max frequency not defined " - "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n", - pxa27x_maxfreq); - } else { - pxa27x_maxfreq *= 1000; - } -} - -static void init_sdram_rows(void) -{ - uint32_t mdcnfg = __raw_readl(MDCNFG); - unsigned int drac2 = 0, drac0 = 0; - - if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3)) - drac2 = MDCNFG_DRAC2(mdcnfg); - - if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1)) - drac0 = MDCNFG_DRAC0(mdcnfg); - - sdram_rows = 1 << (11 + max(drac0, drac2)); -} - -static u32 mdrefr_dri(unsigned int freq) -{ - u32 interval = freq * SDRAM_TREF / sdram_rows; - - return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32; -} - -/* find a valid frequency point */ -static int pxa_verify_policy(struct cpufreq_policy *policy) -{ - struct cpufreq_frequency_table *pxa_freqs_table; - pxa_freqs_t *pxa_freqs; - int ret; - - find_freq_tables(&pxa_freqs_table, &pxa_freqs); - ret = cpufreq_frequency_table_verify(policy, pxa_freqs_table); - - if (freq_debug) - pr_debug("Verified CPU policy: %dKhz min to %dKhz max\n", - policy->min, policy->max); - - return ret; -} - -static unsigned int pxa_cpufreq_get(unsigned int cpu) -{ - return get_clk_frequency_khz(0); -} - -static int pxa_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_frequency_table *pxa_freqs_table; - pxa_freqs_t *pxa_freq_settings; - struct cpufreq_freqs freqs; - unsigned int idx; - unsigned long flags; - unsigned int new_freq_cpu, new_freq_mem; - unsigned int unused, preset_mdrefr, postset_mdrefr, cclkcfg; - int ret = 0; - - /* Get the current policy */ - find_freq_tables(&pxa_freqs_table, &pxa_freq_settings); - - /* Lookup the next frequency */ - if (cpufreq_frequency_table_target(policy, pxa_freqs_table, - target_freq, relation, &idx)) { - return -EINVAL; - } - - new_freq_cpu = pxa_freq_settings[idx].khz; - new_freq_mem = pxa_freq_settings[idx].membus; - freqs.old = policy->cur; - freqs.new = new_freq_cpu; - freqs.cpu = policy->cpu; - - if (freq_debug) - pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n", - freqs.new / 1000, (pxa_freq_settings[idx].div2) ? - (new_freq_mem / 2000) : (new_freq_mem / 1000)); - - if (vcc_core && freqs.new > freqs.old) - ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); - if (ret) - return ret; - /* - * Tell everyone what we're about to do... - * you should add a notify client with any platform specific - * Vcc changing capability - */ - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* Calculate the next MDREFR. If we're slowing down the SDRAM clock - * we need to preset the smaller DRI before the change. If we're - * speeding up we need to set the larger DRI value after the change. - */ - preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR); - if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) { - preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK); - preset_mdrefr |= mdrefr_dri(new_freq_mem); - } - postset_mdrefr = - (postset_mdrefr & ~MDREFR_DRI_MASK) | mdrefr_dri(new_freq_mem); - - /* If we're dividing the memory clock by two for the SDRAM clock, this - * must be set prior to the change. Clearing the divide must be done - * after the change. - */ - if (pxa_freq_settings[idx].div2) { - preset_mdrefr |= MDREFR_DB2_MASK; - postset_mdrefr |= MDREFR_DB2_MASK; - } else { - postset_mdrefr &= ~MDREFR_DB2_MASK; - } - - local_irq_save(flags); - - /* Set new the CCCR and prepare CCLKCFG */ - CCCR = pxa_freq_settings[idx].cccr; - cclkcfg = pxa_freq_settings[idx].cclkcfg; - - asm volatile(" \n\ - ldr r4, [%1] /* load MDREFR */ \n\ - b 2f \n\ - .align 5 \n\ -1: \n\ - str %3, [%1] /* preset the MDREFR */ \n\ - mcr p14, 0, %2, c6, c0, 0 /* set CCLKCFG[FCS] */ \n\ - str %4, [%1] /* postset the MDREFR */ \n\ - \n\ - b 3f \n\ -2: b 1b \n\ -3: nop \n\ - " - : "=&r" (unused) - : "r" (MDREFR), "r" (cclkcfg), - "r" (preset_mdrefr), "r" (postset_mdrefr) - : "r4", "r5"); - local_irq_restore(flags); - - /* - * Tell everyone what we've just done... - * you should add a notify client with any platform specific - * SDRAM refresh timer adjustments - */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - /* - * Even if voltage setting fails, we don't report it, as the frequency - * change succeeded. The voltage reduction is not a critical failure, - * only power savings will suffer from this. - * - * Note: if the voltage change fails, and a return value is returned, a - * bug is triggered (seems a deadlock). Should anybody find out where, - * the "return 0" should become a "return ret". - */ - if (vcc_core && freqs.new < freqs.old) - ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]); - - return 0; -} - -static int pxa_cpufreq_init(struct cpufreq_policy *policy) -{ - int i; - unsigned int freq; - struct cpufreq_frequency_table *pxa255_freq_table; - pxa_freqs_t *pxa255_freqs; - - /* try to guess pxa27x cpu */ - if (cpu_is_pxa27x()) - pxa27x_guess_max_freq(); - - pxa_cpufreq_init_voltages(); - - init_sdram_rows(); - - /* set default policy and cpuinfo */ - policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ - policy->cur = get_clk_frequency_khz(0); /* current freq */ - policy->min = policy->max = policy->cur; - - /* Generate pxa25x the run cpufreq_frequency_table struct */ - for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { - pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; - pxa255_run_freq_table[i].index = i; - } - pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; - - /* Generate pxa25x the turbo cpufreq_frequency_table struct */ - for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { - pxa255_turbo_freq_table[i].frequency = - pxa255_turbo_freqs[i].khz; - pxa255_turbo_freq_table[i].index = i; - } - pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; - - pxa255_turbo_table = !!pxa255_turbo_table; - - /* Generate the pxa27x cpufreq_frequency_table struct */ - for (i = 0; i < NUM_PXA27x_FREQS; i++) { - freq = pxa27x_freqs[i].khz; - if (freq > pxa27x_maxfreq) - break; - pxa27x_freq_table[i].frequency = freq; - pxa27x_freq_table[i].index = i; - } - pxa27x_freq_table[i].index = i; - pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; - - /* - * Set the policy's minimum and maximum frequencies from the tables - * just constructed. This sets cpuinfo.mxx_freq, min and max. - */ - if (cpu_is_pxa25x()) { - find_freq_tables(&pxa255_freq_table, &pxa255_freqs); - pr_info("PXA255 cpufreq using %s frequency table\n", - pxa255_turbo_table ? "turbo" : "run"); - cpufreq_frequency_table_cpuinfo(policy, pxa255_freq_table); - } - else if (cpu_is_pxa27x()) - cpufreq_frequency_table_cpuinfo(policy, pxa27x_freq_table); - - printk(KERN_INFO "PXA CPU frequency change support initialized\n"); - - return 0; -} - -static struct cpufreq_driver pxa_cpufreq_driver = { - .verify = pxa_verify_policy, - .target = pxa_set_target, - .init = pxa_cpufreq_init, - .get = pxa_cpufreq_get, - .name = "PXA2xx", -}; - -static int __init pxa_cpu_init(void) -{ - int ret = -ENODEV; - if (cpu_is_pxa25x() || cpu_is_pxa27x()) - ret = cpufreq_register_driver(&pxa_cpufreq_driver); - return ret; -} - -static void __exit pxa_cpu_exit(void) -{ - cpufreq_unregister_driver(&pxa_cpufreq_driver); -} - - -MODULE_AUTHOR("Intrinsyc Software Inc."); -MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture"); -MODULE_LICENSE("GPL"); -module_init(pxa_cpu_init); -module_exit(pxa_cpu_exit); diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c deleted file mode 100644 index b85b4ab..0000000 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c - * - * Copyright (C) 2008 Marvell International Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/slab.h> -#include <linux/io.h> - -#include <mach/pxa3xx-regs.h> - -#include "generic.h" - -#define HSS_104M (0) -#define HSS_156M (1) -#define HSS_208M (2) -#define HSS_312M (3) - -#define SMCFS_78M (0) -#define SMCFS_104M (2) -#define SMCFS_208M (5) - -#define SFLFS_104M (0) -#define SFLFS_156M (1) -#define SFLFS_208M (2) -#define SFLFS_312M (3) - -#define XSPCLK_156M (0) -#define XSPCLK_NONE (3) - -#define DMCFS_26M (0) -#define DMCFS_260M (3) - -struct pxa3xx_freq_info { - unsigned int cpufreq_mhz; - unsigned int core_xl : 5; - unsigned int core_xn : 3; - unsigned int hss : 2; - unsigned int dmcfs : 2; - unsigned int smcfs : 3; - unsigned int sflfs : 2; - unsigned int df_clkdiv : 3; - - int vcc_core; /* in mV */ - int vcc_sram; /* in mV */ -}; - -#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \ -{ \ - .cpufreq_mhz = cpufreq, \ - .core_xl = _xl, \ - .core_xn = _xn, \ - .hss = HSS_##_hss##M, \ - .dmcfs = DMCFS_##_dmc##M, \ - .smcfs = SMCFS_##_smc##M, \ - .sflfs = SFLFS_##_sfl##M, \ - .df_clkdiv = _dfi, \ - .vcc_core = vcore, \ - .vcc_sram = vsram, \ -} - -static struct pxa3xx_freq_info pxa300_freqs[] = { - /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ - OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ - OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ - OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ - OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ -}; - -static struct pxa3xx_freq_info pxa320_freqs[] = { - /* CPU XL XN HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */ - OP(104, 8, 1, 104, 260, 78, 104, 3, 1000, 1100), /* 104MHz */ - OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */ - OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */ - OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */ - OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */ -}; - -static unsigned int pxa3xx_freqs_num; -static struct pxa3xx_freq_info *pxa3xx_freqs; -static struct cpufreq_frequency_table *pxa3xx_freqs_table; - -static int setup_freqs_table(struct cpufreq_policy *policy, - struct pxa3xx_freq_info *freqs, int num) -{ - struct cpufreq_frequency_table *table; - int i; - - table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL); - if (table == NULL) - return -ENOMEM; - - for (i = 0; i < num; i++) { - table[i].index = i; - table[i].frequency = freqs[i].cpufreq_mhz * 1000; - } - table[num].index = i; - table[num].frequency = CPUFREQ_TABLE_END; - - pxa3xx_freqs = freqs; - pxa3xx_freqs_num = num; - pxa3xx_freqs_table = table; - - return cpufreq_frequency_table_cpuinfo(policy, table); -} - -static void __update_core_freq(struct pxa3xx_freq_info *info) -{ - uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK; - uint32_t accr = ACCR; - uint32_t xclkcfg; - - accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK); - accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl); - - /* No clock until core PLL is re-locked */ - accr |= ACCR_XSPCLK(XSPCLK_NONE); - - xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2; /* turbo bit */ - - ACCR = accr; - __asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg)); - - while ((ACSR & mask) != (accr & mask)) - cpu_relax(); -} - -static void __update_bus_freq(struct pxa3xx_freq_info *info) -{ - uint32_t mask; - uint32_t accr = ACCR; - - mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK | - ACCR_DMCFS_MASK; - - accr &= ~mask; - accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) | - ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs); - - ACCR = accr; - - while ((ACSR & mask) != (accr & mask)) - cpu_relax(); -} - -static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table); -} - -static unsigned int pxa3xx_cpufreq_get(unsigned int cpu) -{ - return pxa3xx_get_clk_frequency_khz(0); -} - -static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct pxa3xx_freq_info *next; - struct cpufreq_freqs freqs; - unsigned long flags; - int idx; - - if (policy->cpu != 0) - return -EINVAL; - - /* Lookup the next frequency */ - if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table, - target_freq, relation, &idx)) - return -EINVAL; - - next = &pxa3xx_freqs[idx]; - - freqs.old = policy->cur; - freqs.new = next->cpufreq_mhz * 1000; - freqs.cpu = policy->cpu; - - pr_debug("CPU frequency from %d MHz to %d MHz%s\n", - freqs.old / 1000, freqs.new / 1000, - (freqs.old == freqs.new) ? " (skipped)" : ""); - - if (freqs.old == target_freq) - return 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - local_irq_save(flags); - __update_core_freq(next); - __update_bus_freq(next); - local_irq_restore(flags); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy) -{ - int ret = -EINVAL; - - /* set default policy and cpuinfo */ - policy->cpuinfo.min_freq = 104000; - policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000; - policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */ - policy->max = pxa3xx_get_clk_frequency_khz(0); - policy->cur = policy->min = policy->max; - - if (cpu_is_pxa300() || cpu_is_pxa310()) - ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs)); - - if (cpu_is_pxa320()) - ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs)); - - if (ret) { - pr_err("failed to setup frequency table\n"); - return ret; - } - - pr_info("CPUFREQ support for PXA3xx initialized\n"); - return 0; -} - -static struct cpufreq_driver pxa3xx_cpufreq_driver = { - .verify = pxa3xx_cpufreq_verify, - .target = pxa3xx_cpufreq_set, - .init = pxa3xx_cpufreq_init, - .get = pxa3xx_cpufreq_get, - .name = "pxa3xx-cpufreq", -}; - -static int __init cpufreq_init(void) -{ - if (cpu_is_pxa3xx()) - return cpufreq_register_driver(&pxa3xx_cpufreq_driver); - - return 0; -} -module_init(cpufreq_init); - -static void __exit cpufreq_exit(void) -{ - cpufreq_unregister_driver(&pxa3xx_cpufreq_driver); -} -module_exit(cpufreq_exit); - -MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx"); -MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h new file mode 100644 index 0000000..665542e --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/generic.h @@ -0,0 +1 @@ +#include "../../generic.h" diff --git a/arch/arm/mach-s3c24xx/cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq.c index 5f181e7..3c0e78e 100644 --- a/arch/arm/mach-s3c24xx/cpufreq.c +++ b/arch/arm/mach-s3c24xx/cpufreq.c @@ -204,7 +204,6 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, freqs.old = cpu_cur.freq; freqs.new = cpu_new.freq; - freqs.freqs.cpu = 0; freqs.freqs.old = cpu_cur.freq.armclk / 1000; freqs.freqs.new = cpu_new.freq.armclk / 1000; @@ -218,9 +217,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); /* start the frequency change */ - - if (policy) - cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_PRECHANGE); /* If hclk is staying the same, then we do not need to * re-write the IO or the refresh timings whilst we are changing @@ -264,8 +261,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, local_irq_restore(flags); /* notify everyone we've done this */ - if (policy) - cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE); + cpufreq_notify_transition(policy, &freqs.freqs, CPUFREQ_POSTCHANGE); s3c_freq_dbg("%s: finished\n", __func__); return 0; diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index ca14dbd..04f9784 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -4,7 +4,7 @@ menu "SA11x0 Implementations" config SA1100_ASSABET bool "Assabet" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ help Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 Microprocessor Development Board (also known as the Assabet). @@ -20,7 +20,7 @@ config ASSABET_NEPONSET config SA1100_CERF bool "CerfBoard" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ help The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). More information is available at: @@ -47,7 +47,7 @@ endchoice config SA1100_COLLIE bool "Sharp Zaurus SL5500" - # FIXME: select CPU_FREQ_SA11x0 + # FIXME: select ARM_SA11x0_CPUFREQ select SHARP_LOCOMO select SHARP_PARAM select SHARP_SCOOP @@ -56,7 +56,7 @@ config SA1100_COLLIE config SA1100_H3100 bool "Compaq iPAQ H3100" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ select HTC_EGPIO help Say Y here if you intend to run this kernel on the Compaq iPAQ @@ -67,7 +67,7 @@ config SA1100_H3100 config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ select HTC_EGPIO help Say Y here if you intend to run this kernel on the Compaq iPAQ @@ -78,7 +78,7 @@ config SA1100_H3600 config SA1100_BADGE4 bool "HP Labs BadgePAD 4" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ select SA1111 help Say Y here if you want to build a kernel for the HP Laboratories @@ -86,7 +86,7 @@ config SA1100_BADGE4 config SA1100_JORNADA720 bool "HP Jornada 720" - # FIXME: select CPU_FREQ_SA11x0 + # FIXME: select ARM_SA11x0_CPUFREQ select SA1111 help Say Y here if you want to build a kernel for the HP Jornada 720 @@ -105,14 +105,14 @@ config SA1100_JORNADA720_SSP config SA1100_HACKKIT bool "HackKit Core CPU Board" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help Say Y here to support the HackKit Core CPU Board <http://hackkit.eletztrick.de>; config SA1100_LART bool "LART" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help Say Y here if you are using the Linux Advanced Radio Terminal (also known as the LART). See <http://www.lartmaker.nl/> for @@ -120,7 +120,7 @@ config SA1100_LART config SA1100_NANOENGINE bool "nanoEngine" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ select PCI select PCI_NANOENGINE help @@ -130,7 +130,7 @@ config SA1100_NANOENGINE config SA1100_PLEB bool "PLEB" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help Say Y here if you are using version 1 of the Portable Linux Embedded Board (also known as PLEB). @@ -139,7 +139,7 @@ config SA1100_PLEB config SA1100_SHANNON bool "Shannon" - select CPU_FREQ_SA1100 + select ARM_SA1100_CPUFREQ help The Shannon (also known as a Tuxscreen, and also as a IS2630) was a limited edition webphone produced by Philips. The Shannon is a SA1100 @@ -148,7 +148,7 @@ config SA1100_SHANNON config SA1100_SIMPAD bool "Simpad" - select CPU_FREQ_SA1110 + select ARM_SA1110_CPUFREQ help The SIEMENS webpad SIMpad is based on the StrongARM 1110. There are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 1aed9e7..2732eef 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -8,9 +8,6 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_CPU_FREQ_SA1100) += cpu-sa1100.o -obj-$(CONFIG_CPU_FREQ_SA1110) += cpu-sa1110.o - # Specific board support obj-$(CONFIG_SA1100_ASSABET) += assabet.o obj-$(CONFIG_ASSABET_NEPONSET) += neponset.o diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c deleted file mode 100644 index e8f4d1e..0000000 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * cpu-sa1100.c: clock scaling for the SA1100 - * - * Copyright (C) 2000 2001, The Delft University of Technology - * - * Authors: - * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version - * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl): - * - major rewrite for linux-2.3.99 - * - rewritten for the more generic power management scheme in - * linux-2.4.5-rmk1 - * - * This software has been developed while working on the LART - * computing board (http://www.lartmaker.nl/), which is - * sponsored by the Mobile Multi-media Communications - * (http://www.mobimedia.org/) and Ubiquitous Communications - * (http://www.ubicom.tudelft.nl/) projects. - * - * The authors can be reached at: - * - * Erik Mouw - * Information and Communication Theory Group - * Faculty of Information Technology and Systems - * Delft University of Technology - * P.O. Box 5031 - * 2600 GA Delft - * The Netherlands - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * Theory of operations - * ==================== - * - * Clock scaling can be used to lower the power consumption of the CPU - * core. This will give you a somewhat longer running time. - * - * The SA-1100 has a single register to change the core clock speed: - * - * PPCR 0x90020014 PLL config - * - * However, the DRAM timings are closely related to the core clock - * speed, so we need to change these, too. The used registers are: - * - * MDCNFG 0xA0000000 DRAM config - * MDCAS0 0xA0000004 Access waveform - * MDCAS1 0xA0000008 Access waveform - * MDCAS2 0xA000000C Access waveform - * - * Care must be taken to change the DRAM parameters the correct way, - * because otherwise the DRAM becomes unusable and the kernel will - * crash. - * - * The simple solution to avoid a kernel crash is to put the actual - * clock change in ROM and jump to that code from the kernel. The main - * disadvantage is that the ROM has to be modified, which is not - * possible on all SA-1100 platforms. Another disadvantage is that - * jumping to ROM makes clock switching unnecessary complicated. - * - * The idea behind this driver is that the memory configuration can be - * changed while running from DRAM (even with interrupts turned on!) - * as long as all re-configuration steps yield a valid DRAM - * configuration. The advantages are clear: it will run on all SA-1100 - * platforms, and the code is very simple. - * - * If you really want to understand what is going on in - * sa1100_update_dram_timings(), you'll have to read sections 8.2, - * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor - * Developers Manual" (available for free from Intel). - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/io.h> - -#include <asm/cputype.h> - -#include <mach/hardware.h> - -#include "generic.h" - -struct sa1100_dram_regs { - int speed; - u32 mdcnfg; - u32 mdcas0; - u32 mdcas1; - u32 mdcas2; -}; - - -static struct cpufreq_driver sa1100_driver; - -static struct sa1100_dram_regs sa1100_dram_settings[] = { - /*speed, mdcnfg, mdcas0, mdcas1, mdcas2, clock freq */ - { 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 59.0 MHz */ - { 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 73.7 MHz */ - { 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 88.5 MHz */ - {103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */ - {118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */ - {132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */ - {147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */ - {162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */ - {176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */ - {191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */ - {206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */ - {221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */ - {235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */ - {250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */ - {265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */ - {280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */ - { 0, 0, 0, 0, 0 } /* last entry */ -}; - -static void sa1100_update_dram_timings(int current_speed, int new_speed) -{ - struct sa1100_dram_regs *settings = sa1100_dram_settings; - - /* find speed */ - while (settings->speed != 0) { - if (new_speed == settings->speed) - break; - - settings++; - } - - if (settings->speed == 0) { - panic("%s: couldn't find dram setting for speed %d\n", - __func__, new_speed); - } - - /* No risk, no fun: run with interrupts on! */ - if (new_speed > current_speed) { - /* We're going FASTER, so first relax the memory - * timings before changing the core frequency - */ - - /* Half the memory access clock */ - MDCNFG |= MDCNFG_CDB2; - - /* The order of these statements IS important, keep 8 - * pulses!! - */ - MDCAS2 = settings->mdcas2; - MDCAS1 = settings->mdcas1; - MDCAS0 = settings->mdcas0; - MDCNFG = settings->mdcnfg; - } else { - /* We're going SLOWER: first decrease the core - * frequency and then tighten the memory settings. - */ - - /* Half the memory access clock */ - MDCNFG |= MDCNFG_CDB2; - - /* The order of these statements IS important, keep 8 - * pulses!! - */ - MDCAS0 = settings->mdcas0; - MDCAS1 = settings->mdcas1; - MDCAS2 = settings->mdcas2; - MDCNFG = settings->mdcnfg; - } -} - -static int sa1100_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int cur = sa11x0_getspeed(0); - unsigned int new_ppcr; - struct cpufreq_freqs freqs; - - new_ppcr = sa11x0_freq_to_ppcr(target_freq); - switch (relation) { - case CPUFREQ_RELATION_L: - if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max) - new_ppcr--; - break; - case CPUFREQ_RELATION_H: - if ((sa11x0_ppcr_to_freq(new_ppcr) > target_freq) && - (sa11x0_ppcr_to_freq(new_ppcr - 1) >= policy->min)) - new_ppcr--; - break; - } - - freqs.old = cur; - freqs.new = sa11x0_ppcr_to_freq(new_ppcr); - freqs.cpu = 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - if (freqs.new > cur) - sa1100_update_dram_timings(cur, freqs.new); - - PPCR = new_ppcr; - - if (freqs.new < cur) - sa1100_update_dram_timings(cur, freqs.new); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static int __init sa1100_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - policy->cur = policy->min = policy->max = sa11x0_getspeed(0); - policy->cpuinfo.min_freq = 59000; - policy->cpuinfo.max_freq = 287000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - return 0; -} - -static struct cpufreq_driver sa1100_driver __refdata = { - .flags = CPUFREQ_STICKY, - .verify = sa11x0_verify_speed, - .target = sa1100_target, - .get = sa11x0_getspeed, - .init = sa1100_cpu_init, - .name = "sa1100", -}; - -static int __init sa1100_dram_init(void) -{ - if (cpu_is_sa1100()) - return cpufreq_register_driver(&sa1100_driver); - else - return -ENODEV; -} - -arch_initcall(sa1100_dram_init); diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c deleted file mode 100644 index 48c45b0..0000000 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - * linux/arch/arm/mach-sa1100/cpu-sa1110.c - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note: there are two erratas that apply to the SA1110 here: - * 7 - SDRAM auto-power-up failure (rev A0) - * 13 - Corruption of internal register reads/writes following - * SDRAM reads (rev A0, B0, B1) - * - * We ignore rev. A0 and B0 devices; I don't think they're worth supporting. - * - * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type - */ -#include <linux/cpufreq.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/moduleparam.h> -#include <linux/types.h> - -#include <asm/cputype.h> -#include <asm/mach-types.h> - -#include <mach/hardware.h> - -#include "generic.h" - -#undef DEBUG - -struct sdram_params { - const char name[20]; - u_char rows; /* bits */ - u_char cas_latency; /* cycles */ - u_char tck; /* clock cycle time (ns) */ - u_char trcd; /* activate to r/w (ns) */ - u_char trp; /* precharge to activate (ns) */ - u_char twr; /* write recovery time (ns) */ - u_short refresh; /* refresh time for array (us) */ -}; - -struct sdram_info { - u_int mdcnfg; - u_int mdrefr; - u_int mdcas[3]; -}; - -static struct sdram_params sdram_tbl[] __initdata = { - { /* Toshiba TC59SM716 CL2 */ - .name = "TC59SM716-CL2", - .rows = 12, - .tck = 10, - .trcd = 20, - .trp = 20, - .twr = 10, - .refresh = 64000, - .cas_latency = 2, - }, { /* Toshiba TC59SM716 CL3 */ - .name = "TC59SM716-CL3", - .rows = 12, - .tck = 8, - .trcd = 20, - .trp = 20, - .twr = 8, - .refresh = 64000, - .cas_latency = 3, - }, { /* Samsung K4S641632D TC75 */ - .name = "K4S641632D", - .rows = 14, - .tck = 9, - .trcd = 27, - .trp = 20, - .twr = 9, - .refresh = 64000, - .cas_latency = 3, - }, { /* Samsung K4S281632B-1H */ - .name = "K4S281632B-1H", - .rows = 12, - .tck = 10, - .trp = 20, - .twr = 10, - .refresh = 64000, - .cas_latency = 3, - }, { /* Samsung KM416S4030CT */ - .name = "KM416S4030CT", - .rows = 13, - .tck = 8, - .trcd = 24, /* 3 CLKs */ - .trp = 24, /* 3 CLKs */ - .twr = 16, /* Trdl: 2 CLKs */ - .refresh = 64000, - .cas_latency = 3, - }, { /* Winbond W982516AH75L CL3 */ - .name = "W982516AH75L", - .rows = 16, - .tck = 8, - .trcd = 20, - .trp = 20, - .twr = 8, - .refresh = 64000, - .cas_latency = 3, - }, { /* Micron MT48LC8M16A2TG-75 */ - .name = "MT48LC8M16A2TG-75", - .rows = 12, - .tck = 8, - .trcd = 20, - .trp = 20, - .twr = 8, - .refresh = 64000, - .cas_latency = 3, - }, -}; - -static struct sdram_params sdram_params; - -/* - * Given a period in ns and frequency in khz, calculate the number of - * cycles of frequency in period. Note that we round up to the next - * cycle, even if we are only slightly over. - */ -static inline u_int ns_to_cycles(u_int ns, u_int khz) -{ - return (ns * khz + 999999) / 1000000; -} - -/* - * Create the MDCAS register bit pattern. - */ -static inline void set_mdcas(u_int *mdcas, int delayed, u_int rcd) -{ - u_int shift; - - rcd = 2 * rcd - 1; - shift = delayed + 1 + rcd; - - mdcas[0] = (1 << rcd) - 1; - mdcas[0] |= 0x55555555 << shift; - mdcas[1] = mdcas[2] = 0x55555555 << (shift & 1); -} - -static void -sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz, - struct sdram_params *sdram) -{ - u_int mem_khz, sd_khz, trp, twr; - - mem_khz = cpu_khz / 2; - sd_khz = mem_khz; - - /* - * If SDCLK would invalidate the SDRAM timings, - * run SDCLK at half speed. - * - * CPU steppings prior to B2 must either run the memory at - * half speed or use delayed read latching (errata 13). - */ - if ((ns_to_cycles(sdram->tck, sd_khz) > 1) || - (CPU_REVISION < CPU_SA1110_B2 && sd_khz < 62000)) - sd_khz /= 2; - - sd->mdcnfg = MDCNFG & 0x007f007f; - - twr = ns_to_cycles(sdram->twr, mem_khz); - - /* trp should always be >1 */ - trp = ns_to_cycles(sdram->trp, mem_khz) - 1; - if (trp < 1) - trp = 1; - - sd->mdcnfg |= trp << 8; - sd->mdcnfg |= trp << 24; - sd->mdcnfg |= sdram->cas_latency << 12; - sd->mdcnfg |= sdram->cas_latency << 28; - sd->mdcnfg |= twr << 14; - sd->mdcnfg |= twr << 30; - - sd->mdrefr = MDREFR & 0xffbffff0; - sd->mdrefr |= 7; - - if (sd_khz != mem_khz) - sd->mdrefr |= MDREFR_K1DB2; - - /* initial number of '1's in MDCAS + 1 */ - set_mdcas(sd->mdcas, sd_khz >= 62000, - ns_to_cycles(sdram->trcd, mem_khz)); - -#ifdef DEBUG - printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n", - sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1], - sd->mdcas[2]); -#endif -} - -/* - * Set the SDRAM refresh rate. - */ -static inline void sdram_set_refresh(u_int dri) -{ - MDREFR = (MDREFR & 0xffff000f) | (dri << 4); - (void) MDREFR; -} - -/* - * Update the refresh period. We do this such that we always refresh - * the SDRAMs within their permissible period. The refresh period is - * always a multiple of the memory clock (fixed at cpu_clock / 2). - * - * FIXME: we don't currently take account of burst accesses here, - * but neither do Intels DM nor Angel. - */ -static void -sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram) -{ - u_int ns_row = (sdram->refresh * 1000) >> sdram->rows; - u_int dri = ns_to_cycles(ns_row, cpu_khz / 2) / 32; - -#ifdef DEBUG - mdelay(250); - printk(KERN_DEBUG "new dri value = %d\n", dri); -#endif - - sdram_set_refresh(dri); -} - -/* - * Ok, set the CPU frequency. - */ -static int sa1110_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct sdram_params *sdram = &sdram_params; - struct cpufreq_freqs freqs; - struct sdram_info sd; - unsigned long flags; - unsigned int ppcr, unused; - - switch (relation) { - case CPUFREQ_RELATION_L: - ppcr = sa11x0_freq_to_ppcr(target_freq); - if (sa11x0_ppcr_to_freq(ppcr) > policy->max) - ppcr--; - break; - case CPUFREQ_RELATION_H: - ppcr = sa11x0_freq_to_ppcr(target_freq); - if (ppcr && (sa11x0_ppcr_to_freq(ppcr) > target_freq) && - (sa11x0_ppcr_to_freq(ppcr-1) >= policy->min)) - ppcr--; - break; - default: - return -EINVAL; - } - - freqs.old = sa11x0_getspeed(0); - freqs.new = sa11x0_ppcr_to_freq(ppcr); - freqs.cpu = 0; - - sdram_calculate_timing(&sd, freqs.new, sdram); - -#if 0 - /* - * These values are wrong according to the SA1110 documentation - * and errata, but they seem to work. Need to get a storage - * scope on to the SDRAM signals to work out why. - */ - if (policy->max < 147500) { - sd.mdrefr |= MDREFR_K1DB2; - sd.mdcas[0] = 0xaaaaaa7f; - } else { - sd.mdrefr &= ~MDREFR_K1DB2; - sd.mdcas[0] = 0xaaaaaa9f; - } - sd.mdcas[1] = 0xaaaaaaaa; - sd.mdcas[2] = 0xaaaaaaaa; -#endif - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* - * The clock could be going away for some time. Set the SDRAMs - * to refresh rapidly (every 64 memory clock cycles). To get - * through the whole array, we need to wait 262144 mclk cycles. - * We wait 20ms to be safe. - */ - sdram_set_refresh(2); - if (!irqs_disabled()) - msleep(20); - else - mdelay(20); - - /* - * Reprogram the DRAM timings with interrupts disabled, and - * ensure that we are doing this within a complete cache line. - * This means that we won't access SDRAM for the duration of - * the programming. - */ - local_irq_save(flags); - asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0)); - udelay(10); - __asm__ __volatile__("\n\ - b 2f \n\ - .align 5 \n\ -1: str %3, [%1, #0] @ MDCNFG \n\ - str %4, [%1, #28] @ MDREFR \n\ - str %5, [%1, #4] @ MDCAS0 \n\ - str %6, [%1, #8] @ MDCAS1 \n\ - str %7, [%1, #12] @ MDCAS2 \n\ - str %8, [%2, #0] @ PPCR \n\ - ldr %0, [%1, #0] \n\ - b 3f \n\ -2: b 1b \n\ -3: nop \n\ - nop" - : "=&r" (unused) - : "r" (&MDCNFG), "r" (&PPCR), "0" (sd.mdcnfg), - "r" (sd.mdrefr), "r" (sd.mdcas[0]), - "r" (sd.mdcas[1]), "r" (sd.mdcas[2]), "r" (ppcr)); - local_irq_restore(flags); - - /* - * Now, return the SDRAM refresh back to normal. - */ - sdram_update_refresh(freqs.new, sdram); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static int __init sa1110_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - policy->cur = policy->min = policy->max = sa11x0_getspeed(0); - policy->cpuinfo.min_freq = 59000; - policy->cpuinfo.max_freq = 287000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - return 0; -} - -/* sa1110_driver needs __refdata because it must remain after init registers - * it with cpufreq_register_driver() */ -static struct cpufreq_driver sa1110_driver __refdata = { - .flags = CPUFREQ_STICKY, - .verify = sa11x0_verify_speed, - .target = sa1110_target, - .get = sa11x0_getspeed, - .init = sa1110_cpu_init, - .name = "sa1110", -}; - -static struct sdram_params *sa1110_find_sdram(const char *name) -{ - struct sdram_params *sdram; - - for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); - sdram++) - if (strcmp(name, sdram->name) == 0) - return sdram; - - return NULL; -} - -static char sdram_name[16]; - -static int __init sa1110_clk_init(void) -{ - struct sdram_params *sdram; - const char *name = sdram_name; - - if (!cpu_is_sa1110()) - return -ENODEV; - - if (!name[0]) { - if (machine_is_assabet()) - name = "TC59SM716-CL3"; - if (machine_is_pt_system3()) - name = "K4S641632D"; - if (machine_is_h3100()) - name = "KM416S4030CT"; - if (machine_is_jornada720()) - name = "K4S281632B-1H"; - if (machine_is_nanoengine()) - name = "MT48LC8M16A2TG-75"; - } - - sdram = sa1110_find_sdram(name); - if (sdram) { - printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d" - " twr: %d refresh: %d cas_latency: %d\n", - sdram->tck, sdram->trcd, sdram->trp, - sdram->twr, sdram->refresh, sdram->cas_latency); - - memcpy(&sdram_params, sdram, sizeof(sdram_params)); - - return cpufreq_register_driver(&sa1110_driver); - } - - return 0; -} - -module_param_string(sdram, sdram_name, sizeof(sdram_name), 0); -arch_initcall(sa1110_clk_init); diff --git a/arch/arm/mach-sa1100/include/mach/generic.h b/arch/arm/mach-sa1100/include/mach/generic.h new file mode 100644 index 0000000..665542e --- /dev/null +++ b/arch/arm/mach-sa1100/include/mach/generic.h @@ -0,0 +1 @@ +#include "../../generic.h" diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index f6b46ae..09b578f 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -24,7 +24,6 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o endif obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o -obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o obj-$(CONFIG_TEGRA_PCI) += pcie.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += board-dt-tegra20.o diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c deleted file mode 100644 index e3d6e15..0000000 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - * arch/arm/mach-tegra/cpu-tegra.c - * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Based on arch/arm/plat-omap/cpu-omap.c, (C) 2005 Nokia Corporation - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/suspend.h> - -/* Frequency table index must be sequential starting at 0 */ -static struct cpufreq_frequency_table freq_table[] = { - { 0, 216000 }, - { 1, 312000 }, - { 2, 456000 }, - { 3, 608000 }, - { 4, 760000 }, - { 5, 816000 }, - { 6, 912000 }, - { 7, 1000000 }, - { 8, CPUFREQ_TABLE_END }, -}; - -#define NUM_CPUS 2 - -static struct clk *cpu_clk; -static struct clk *pll_x_clk; -static struct clk *pll_p_clk; -static struct clk *emc_clk; - -static unsigned long target_cpu_speed[NUM_CPUS]; -static DEFINE_MUTEX(tegra_cpu_lock); -static bool is_suspended; - -static int tegra_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, freq_table); -} - -static unsigned int tegra_getspeed(unsigned int cpu) -{ - unsigned long rate; - - if (cpu >= NUM_CPUS) - return 0; - - rate = clk_get_rate(cpu_clk) / 1000; - return rate; -} - -static int tegra_cpu_clk_set_rate(unsigned long rate) -{ - int ret; - - /* - * Take an extra reference to the main pll so it doesn't turn - * off when we move the cpu off of it - */ - clk_prepare_enable(pll_x_clk); - - ret = clk_set_parent(cpu_clk, pll_p_clk); - if (ret) { - pr_err("Failed to switch cpu to clock pll_p\n"); - goto out; - } - - if (rate == clk_get_rate(pll_p_clk)) - goto out; - - ret = clk_set_rate(pll_x_clk, rate); - if (ret) { - pr_err("Failed to change pll_x to %lu\n", rate); - goto out; - } - - ret = clk_set_parent(cpu_clk, pll_x_clk); - if (ret) { - pr_err("Failed to switch cpu to clock pll_x\n"); - goto out; - } - -out: - clk_disable_unprepare(pll_x_clk); - return ret; -} - -static int tegra_update_cpu_speed(unsigned long rate) -{ - int ret = 0; - struct cpufreq_freqs freqs; - - freqs.old = tegra_getspeed(0); - freqs.new = rate; - - if (freqs.old == freqs.new) - return ret; - - /* - * Vote on memory bus frequency based on cpu frequency - * This sets the minimum frequency, display or avp may request higher - */ - if (rate >= 816000) - clk_set_rate(emc_clk, 600000000); /* cpu 816 MHz, emc max */ - else if (rate >= 456000) - clk_set_rate(emc_clk, 300000000); /* cpu 456 MHz, emc 150Mhz */ - else - clk_set_rate(emc_clk, 100000000); /* emc 50Mhz */ - - for_each_online_cpu(freqs.cpu) - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - -#ifdef CONFIG_CPU_FREQ_DEBUG - printk(KERN_DEBUG "cpufreq-tegra: transition: %u --> %u\n", - freqs.old, freqs.new); -#endif - - ret = tegra_cpu_clk_set_rate(freqs.new * 1000); - if (ret) { - pr_err("cpu-tegra: Failed to set cpu frequency to %d kHz\n", - freqs.new); - return ret; - } - - for_each_online_cpu(freqs.cpu) - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static unsigned long tegra_cpu_highest_speed(void) -{ - unsigned long rate = 0; - int i; - - for_each_online_cpu(i) - rate = max(rate, target_cpu_speed[i]); - return rate; -} - -static int tegra_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int idx; - unsigned int freq; - int ret = 0; - - mutex_lock(&tegra_cpu_lock); - - if (is_suspended) { - ret = -EBUSY; - goto out; - } - - cpufreq_frequency_table_target(policy, freq_table, target_freq, - relation, &idx); - - freq = freq_table[idx].frequency; - - target_cpu_speed[policy->cpu] = freq; - - ret = tegra_update_cpu_speed(tegra_cpu_highest_speed()); - -out: - mutex_unlock(&tegra_cpu_lock); - return ret; -} - -static int tegra_pm_notify(struct notifier_block *nb, unsigned long event, - void *dummy) -{ - mutex_lock(&tegra_cpu_lock); - if (event == PM_SUSPEND_PREPARE) { - is_suspended = true; - pr_info("Tegra cpufreq suspend: setting frequency to %d kHz\n", - freq_table[0].frequency); - tegra_update_cpu_speed(freq_table[0].frequency); - } else if (event == PM_POST_SUSPEND) { - is_suspended = false; - } - mutex_unlock(&tegra_cpu_lock); - - return NOTIFY_OK; -} - -static struct notifier_block tegra_cpu_pm_notifier = { - .notifier_call = tegra_pm_notify, -}; - -static int tegra_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu >= NUM_CPUS) - return -EINVAL; - - clk_prepare_enable(emc_clk); - clk_prepare_enable(cpu_clk); - - cpufreq_frequency_table_cpuinfo(policy, freq_table); - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - policy->cur = tegra_getspeed(policy->cpu); - target_cpu_speed[policy->cpu] = policy->cur; - - /* FIXME: what's the actual transition time? */ - policy->cpuinfo.transition_latency = 300 * 1000; - - cpumask_copy(policy->cpus, cpu_possible_mask); - - if (policy->cpu == 0) - register_pm_notifier(&tegra_cpu_pm_notifier); - - return 0; -} - -static int tegra_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_cpuinfo(policy, freq_table); - clk_disable_unprepare(emc_clk); - return 0; -} - -static struct freq_attr *tegra_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver tegra_cpufreq_driver = { - .verify = tegra_verify_speed, - .target = tegra_target, - .get = tegra_getspeed, - .init = tegra_cpu_init, - .exit = tegra_cpu_exit, - .name = "tegra", - .attr = tegra_cpufreq_attr, -}; - -static int __init tegra_cpufreq_init(void) -{ - cpu_clk = clk_get_sys(NULL, "cpu"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - pll_x_clk = clk_get_sys(NULL, "pll_x"); - if (IS_ERR(pll_x_clk)) - return PTR_ERR(pll_x_clk); - - pll_p_clk = clk_get_sys(NULL, "pll_p_cclk"); - if (IS_ERR(pll_p_clk)) - return PTR_ERR(pll_p_clk); - - emc_clk = clk_get_sys("cpu", "emc"); - if (IS_ERR(emc_clk)) { - clk_put(cpu_clk); - return PTR_ERR(emc_clk); - } - - return cpufreq_register_driver(&tegra_cpufreq_driver); -} - -static void __exit tegra_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&tegra_cpufreq_driver); - clk_put(emc_clk); - clk_put(cpu_clk); -} - - -MODULE_AUTHOR("Colin Cross <ccross@android.com>"); -MODULE_DESCRIPTION("cpufreq driver for Nvidia Tegra2"); -MODULE_LICENSE("GPL"); -module_init(tegra_cpufreq_init); -module_exit(tegra_cpufreq_exit); diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index c1a868d..22c4030 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -250,20 +250,7 @@ config ARCH_SUSPEND_POSSIBLE def_bool y menu "CPU Frequency scaling" - source "drivers/cpufreq/Kconfig" - -config CPU_FREQ_AT32AP - bool "CPU frequency driver for AT32AP" - depends on CPU_FREQ && PLATFORM_AT32AP - default n - help - This enables the CPU frequency driver for AT32AP processors. - - For details, take a look in <file:Documentation/cpu-freq>. - - If in doubt, say N. - endmenu endmenu diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig index f4025db..d5aff36 100644 --- a/arch/avr32/configs/atngw100_defconfig +++ b/arch/avr32/configs/atngw100_defconfig @@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig index c76a49b..4abcf43 100644 --- a/arch/avr32/configs/atngw100_evklcd100_defconfig +++ b/arch/avr32/configs/atngw100_evklcd100_defconfig @@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig index 2d8ab08..18f3fa0 100644 --- a/arch/avr32/configs/atngw100_evklcd101_defconfig +++ b/arch/avr32/configs/atngw100_evklcd101_defconfig @@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig index b189e0c..06e389c 100644 --- a/arch/avr32/configs/atngw100_mrmt_defconfig +++ b/arch/avr32/configs/atngw100_mrmt_defconfig @@ -23,7 +23,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/avr32/configs/atngw100mkii_defconfig b/arch/avr32/configs/atngw100mkii_defconfig index 2e4de42..2518a13 100644 --- a/arch/avr32/configs/atngw100mkii_defconfig +++ b/arch/avr32/configs/atngw100mkii_defconfig @@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig index fad3cd2..245ef6b 100644 --- a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig +++ b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig @@ -29,7 +29,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig index 2998623..fa6cbac 100644 --- a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig +++ b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig @@ -28,7 +28,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index a582465..bbd5131 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -25,7 +25,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig index 57a79df..c1cd726 100644 --- a/arch/avr32/configs/atstk1003_defconfig +++ b/arch/avr32/configs/atstk1003_defconfig @@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig index 1a49bd8..754ae56 100644 --- a/arch/avr32/configs/atstk1004_defconfig +++ b/arch/avr32/configs/atstk1004_defconfig @@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig index 206a1b6..58589d8 100644 --- a/arch/avr32/configs/atstk1006_defconfig +++ b/arch/avr32/configs/atstk1006_defconfig @@ -26,7 +26,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_NET=y CONFIG_PACKET=y diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig index 0421498..57788a4 100644 --- a/arch/avr32/configs/favr-32_defconfig +++ b/arch/avr32/configs/favr-32_defconfig @@ -27,7 +27,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig index 82f24eb..ba7c31e 100644 --- a/arch/avr32/configs/hammerhead_defconfig +++ b/arch/avr32/configs/hammerhead_defconfig @@ -31,7 +31,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig index 1bee51f..0a8bfdc 100644 --- a/arch/avr32/configs/mimc200_defconfig +++ b/arch/avr32/configs/mimc200_defconfig @@ -24,7 +24,7 @@ CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_STAT is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_AT32AP=y +CONFIG_AVR32_AT32AP_CPUFREQ=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile index 514c9a9..fc09ec4 100644 --- a/arch/avr32/mach-at32ap/Makefile +++ b/arch/avr32/mach-at32ap/Makefile @@ -1,7 +1,6 @@ obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o obj-y += hmatrix.o obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o -obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o obj-$(CONFIG_PM) += pm.o ifeq ($(CONFIG_PM_DEBUG),y) diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c deleted file mode 100644 index 18b7656..0000000 --- a/arch/avr32/mach-at32ap/cpufreq.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Copyright (C) 2004-2007 Atmel Corporation - * - * Based on MIPS implementation arch/mips/kernel/time.c - * Copyright 2001 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/*#define DEBUG*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/export.h> - -static struct clk *cpuclk; - -static int at32_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - return 0; -} - -static unsigned int at32_get_speed(unsigned int cpu) -{ - /* No SMP support */ - if (cpu) - return 0; - return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000); -} - -static unsigned int ref_freq; -static unsigned long loops_per_jiffy_ref; - -static int at32_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_freqs freqs; - long freq; - - /* Convert target_freq from kHz to Hz */ - freq = clk_round_rate(cpuclk, target_freq * 1000); - - /* Check if policy->min <= new_freq <= policy->max */ - if(freq < (policy->min * 1000) || freq > (policy->max * 1000)) - return -EINVAL; - - pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000); - - freqs.old = at32_get_speed(0); - freqs.new = (freq + 500) / 1000; - freqs.cpu = 0; - freqs.flags = 0; - - if (!ref_freq) { - ref_freq = freqs.old; - loops_per_jiffy_ref = boot_cpu_data.loops_per_jiffy; - } - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (freqs.old < freqs.new) - boot_cpu_data.loops_per_jiffy = cpufreq_scale( - loops_per_jiffy_ref, ref_freq, freqs.new); - clk_set_rate(cpuclk, freq); - if (freqs.new < freqs.old) - boot_cpu_data.loops_per_jiffy = cpufreq_scale( - loops_per_jiffy_ref, ref_freq, freqs.new); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - pr_debug("cpufreq: set frequency %lu Hz\n", freq); - - return 0; -} - -static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - cpuclk = clk_get(NULL, "cpu"); - if (IS_ERR(cpuclk)) { - pr_debug("cpufreq: could not get CPU clk\n"); - return PTR_ERR(cpuclk); - } - - policy->cpuinfo.min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000; - policy->cpuinfo.max_freq = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; - policy->cpuinfo.transition_latency = 0; - policy->cur = at32_get_speed(0); - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - - printk("cpufreq: AT32AP CPU frequency driver\n"); - - return 0; -} - -static struct cpufreq_driver at32_driver = { - .name = "at32ap", - .owner = THIS_MODULE, - .init = at32_cpufreq_driver_init, - .verify = at32_verify_speed, - .target = at32_set_target, - .get = at32_get_speed, - .flags = CPUFREQ_STICKY, -}; - -static int __init at32_cpufreq_init(void) -{ - return cpufreq_register_driver(&at32_driver); -} -late_initcall(at32_cpufreq_init); diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 75f0ba2..675466d 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_PM) += pm.o ifneq ($(CONFIG_BF60x),y) obj-$(CONFIG_PM) += dpmc_modes.o endif -obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_BFIN_KERNEL_CLOCK) += clocks-init.o diff --git a/arch/blackfin/mach-common/cpufreq.c b/arch/blackfin/mach-common/cpufreq.c deleted file mode 100644 index d88bd31..0000000 --- a/arch/blackfin/mach-common/cpufreq.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Blackfin core clock scaling - * - * Copyright 2008-2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/cpufreq.h> -#include <linux/fs.h> -#include <linux/delay.h> -#include <asm/blackfin.h> -#include <asm/time.h> -#include <asm/dpmc.h> - - -/* this is the table of CCLK frequencies, in Hz */ -/* .index is the entry in the auxiliary dpm_state_table[] */ -static struct cpufreq_frequency_table bfin_freq_table[] = { - { - .frequency = CPUFREQ_TABLE_END, - .index = 0, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 1, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 2, - }, - { - .frequency = CPUFREQ_TABLE_END, - .index = 0, - }, -}; - -static struct bfin_dpm_state { - unsigned int csel; /* system clock divider */ - unsigned int tscale; /* change the divider on the core timer interrupt */ -} dpm_state_table[3]; - -#if defined(CONFIG_CYCLES_CLOCKSOURCE) -/* - * normalized to maximum frequency offset for CYCLES, - * used in time-ts cycles clock source, but could be used - * somewhere also. - */ -unsigned long long __bfin_cycles_off; -unsigned int __bfin_cycles_mod; -#endif - -/**************************************************************************/ -static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk) -{ - - unsigned long csel, min_cclk; - int index; - - /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */ -#if ANOMALY_05000273 || ANOMALY_05000274 || \ - (!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \ - && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE)) - min_cclk = sclk * 2; -#else - min_cclk = sclk; -#endif - -#ifndef CONFIG_BF60x - csel = ((bfin_read_PLL_DIV() & CSEL) >> 4); -#else - csel = bfin_read32(CGU0_DIV) & 0x1F; -#endif - - for (index = 0; (cclk >> index) >= min_cclk && csel <= 3 && index < 3; index++, csel++) { - bfin_freq_table[index].frequency = cclk >> index; -#ifndef CONFIG_BF60x - dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */ -#else - dpm_state_table[index].csel = csel; -#endif - dpm_state_table[index].tscale = (TIME_SCALE >> index) - 1; - - pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n", - bfin_freq_table[index].frequency, - dpm_state_table[index].csel, - dpm_state_table[index].tscale); - } - return; -} - -static void bfin_adjust_core_timer(void *info) -{ - unsigned int tscale; - unsigned int index = *(unsigned int *)info; - - /* we have to adjust the core timer, because it is using cclk */ - tscale = dpm_state_table[index].tscale; - bfin_write_TSCALE(tscale); - return; -} - -static unsigned int bfin_getfreq_khz(unsigned int cpu) -{ - /* Both CoreA/B have the same core clock */ - return get_cclk() / 1000; -} - -#ifdef CONFIG_BF60x -unsigned long cpu_set_cclk(int cpu, unsigned long new) -{ - struct clk *clk; - int ret; - - clk = clk_get(NULL, "CCLK"); - if (IS_ERR(clk)) - return -ENODEV; - - ret = clk_set_rate(clk, new); - clk_put(clk); - return ret; -} -#endif - -static int bfin_target(struct cpufreq_policy *poli, - unsigned int target_freq, unsigned int relation) -{ -#ifndef CONFIG_BF60x - unsigned int plldiv; -#endif - unsigned int index, cpu; - unsigned long cclk_hz; - struct cpufreq_freqs freqs; - static unsigned long lpj_ref; - static unsigned int lpj_ref_freq; - int ret = 0; - -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - cycles_t cycles; -#endif - - for_each_online_cpu(cpu) { - struct cpufreq_policy *policy = cpufreq_cpu_get(cpu); - - if (!policy) - continue; - - if (cpufreq_frequency_table_target(policy, bfin_freq_table, - target_freq, relation, &index)) - return -EINVAL; - - cclk_hz = bfin_freq_table[index].frequency; - - freqs.old = bfin_getfreq_khz(0); - freqs.new = cclk_hz; - freqs.cpu = cpu; - - pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n", - cclk_hz, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - if (cpu == CPUFREQ_CPU) { -#ifndef CONFIG_BF60x - plldiv = (bfin_read_PLL_DIV() & SSEL) | - dpm_state_table[index].csel; - bfin_write_PLL_DIV(plldiv); -#else - ret = cpu_set_cclk(cpu, freqs.new * 1000); - if (ret != 0) { - WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret); - break; - } -#endif - on_each_cpu(bfin_adjust_core_timer, &index, 1); -#if defined(CONFIG_CYCLES_CLOCKSOURCE) - cycles = get_cycles(); - SSYNC(); - cycles += 10; /* ~10 cycles we lose after get_cycles() */ - __bfin_cycles_off += - (cycles << __bfin_cycles_mod) - (cycles << index); - __bfin_cycles_mod = index; -#endif - if (!lpj_ref_freq) { - lpj_ref = loops_per_jiffy; - lpj_ref_freq = freqs.old; - } - if (freqs.new != freqs.old) { - loops_per_jiffy = cpufreq_scale(lpj_ref, - lpj_ref_freq, freqs.new); - } - } - /* TODO: just test case for cycles clock source, remove later */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - } - - pr_debug("cpufreq: done\n"); - return ret; -} - -static int bfin_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, bfin_freq_table); -} - -static int __bfin_cpu_init(struct cpufreq_policy *policy) -{ - - unsigned long cclk, sclk; - - cclk = get_cclk() / 1000; - sclk = get_sclk() / 1000; - - if (policy->cpu == CPUFREQ_CPU) - bfin_init_tables(cclk, sclk); - - policy->cpuinfo.transition_latency = 50000; /* 50us assumed */ - - policy->cur = cclk; - cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table); -} - -static struct freq_attr *bfin_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bfin_driver = { - .verify = bfin_verify_speed, - .target = bfin_target, - .get = bfin_getfreq_khz, - .init = __bfin_cpu_init, - .name = "bfin cpufreq", - .owner = THIS_MODULE, - .attr = bfin_freq_attr, -}; - -static int __init bfin_cpu_init(void) -{ - return cpufreq_register_driver(&bfin_driver); -} - -static void __exit bfin_cpu_exit(void) -{ - cpufreq_unregister_driver(&bfin_driver); -} - -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); -MODULE_DESCRIPTION("cpufreq driver for Blackfin"); -MODULE_LICENSE("GPL"); - -module_init(bfin_cpu_init); -module_exit(bfin_cpu_exit); diff --git a/arch/cris/arch-v32/mach-a3/Makefile b/arch/cris/arch-v32/mach-a3/Makefile index d366e08..18a2271 100644 --- a/arch/cris/arch-v32/mach-a3/Makefile +++ b/arch/cris/arch-v32/mach-a3/Makefile @@ -3,7 +3,6 @@ # obj-y := dma.o pinmux.o io.o arbiter.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o clean: diff --git a/arch/cris/arch-v32/mach-a3/cpufreq.c b/arch/cris/arch-v32/mach-a3/cpufreq.c deleted file mode 100644 index ee391ec..0000000 --- a/arch/cris/arch-v32/mach-a3/cpufreq.c +++ /dev/null @@ -1,152 +0,0 @@ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/cpufreq.h> -#include <hwregs/reg_map.h> -#include <hwregs/reg_rdwr.h> -#include <hwregs/clkgen_defs.h> -#include <hwregs/ddr2_defs.h> - -static int -cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, - void *data); - -static struct notifier_block cris_sdram_freq_notifier_block = { - .notifier_call = cris_sdram_freq_notifier -}; - -static struct cpufreq_frequency_table cris_freq_table[] = { - {0x01, 6000}, - {0x02, 200000}, - {0, CPUFREQ_TABLE_END}, -}; - -static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) -{ - reg_clkgen_rw_clk_ctrl clk_ctrl; - clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); - return clk_ctrl.pll ? 200000 : 6000; -} - -static void cris_freq_set_cpu_state(unsigned int state) -{ - int i = 0; - struct cpufreq_freqs freqs; - reg_clkgen_rw_clk_ctrl clk_ctrl; - clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl); - -#ifdef CONFIG_SMP - for_each_present_cpu(i) -#endif - { - freqs.old = cris_freq_get_cpu_frequency(i); - freqs.new = cris_freq_table[state].frequency; - freqs.cpu = i; - } - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - local_irq_disable(); - - /* Even though we may be SMP they will share the same clock - * so all settings are made on CPU0. */ - if (cris_freq_table[state].frequency == 200000) - clk_ctrl.pll = 1; - else - clk_ctrl.pll = 0; - REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl); - - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -}; - -static int cris_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &cris_freq_table[0]); -} - -static int cris_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target(policy, cris_freq_table, - target_freq, relation, &newstate)) - return -EINVAL; - - cris_freq_set_cpu_state(newstate); - - return 0; -} - -static int cris_freq_cpu_init(struct cpufreq_policy *policy) -{ - int result; - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 1000000; /* 1ms */ - policy->cur = cris_freq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, cris_freq_table); - if (result) - return (result); - - cpufreq_frequency_table_get_attr(cris_freq_table, policy->cpu); - - return 0; -} - - -static int cris_freq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - - -static struct freq_attr *cris_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver cris_freq_driver = { - .get = cris_freq_get_cpu_frequency, - .verify = cris_freq_verify, - .target = cris_freq_target, - .init = cris_freq_cpu_init, - .exit = cris_freq_cpu_exit, - .name = "cris_freq", - .owner = THIS_MODULE, - .attr = cris_freq_attr, -}; - -static int __init cris_freq_init(void) -{ - int ret; - ret = cpufreq_register_driver(&cris_freq_driver); - cpufreq_register_notifier(&cris_sdram_freq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - return ret; -} - -static int -cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - int i; - struct cpufreq_freqs *freqs = data; - if (val == CPUFREQ_PRECHANGE) { - reg_ddr2_rw_cfg cfg = - REG_RD(ddr2, regi_ddr2_ctrl, rw_cfg); - cfg.ref_interval = (freqs->new == 200000 ? 1560 : 46); - - if (freqs->new == 200000) - for (i = 0; i < 50000; i++); - REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing); - } - return 0; -} - - -module_init(cris_freq_init); diff --git a/arch/cris/arch-v32/mach-fs/Makefile b/arch/cris/arch-v32/mach-fs/Makefile index d366e08..18a2271 100644 --- a/arch/cris/arch-v32/mach-fs/Makefile +++ b/arch/cris/arch-v32/mach-fs/Makefile @@ -3,7 +3,6 @@ # obj-y := dma.o pinmux.o io.o arbiter.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o clean: diff --git a/arch/cris/arch-v32/mach-fs/cpufreq.c b/arch/cris/arch-v32/mach-fs/cpufreq.c deleted file mode 100644 index d92cf70..0000000 --- a/arch/cris/arch-v32/mach-fs/cpufreq.c +++ /dev/null @@ -1,145 +0,0 @@ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/cpufreq.h> -#include <hwregs/reg_map.h> -#include <arch/hwregs/reg_rdwr.h> -#include <arch/hwregs/config_defs.h> -#include <arch/hwregs/bif_core_defs.h> - -static int -cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, - void *data); - -static struct notifier_block cris_sdram_freq_notifier_block = { - .notifier_call = cris_sdram_freq_notifier -}; - -static struct cpufreq_frequency_table cris_freq_table[] = { - {0x01, 6000}, - {0x02, 200000}, - {0, CPUFREQ_TABLE_END}, -}; - -static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) -{ - reg_config_rw_clk_ctrl clk_ctrl; - clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); - return clk_ctrl.pll ? 200000 : 6000; -} - -static void cris_freq_set_cpu_state(unsigned int state) -{ - int i; - struct cpufreq_freqs freqs; - reg_config_rw_clk_ctrl clk_ctrl; - clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); - - for_each_possible_cpu(i) { - freqs.old = cris_freq_get_cpu_frequency(i); - freqs.new = cris_freq_table[state].frequency; - freqs.cpu = i; - } - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - local_irq_disable(); - - /* Even though we may be SMP they will share the same clock - * so all settings are made on CPU0. */ - if (cris_freq_table[state].frequency == 200000) - clk_ctrl.pll = 1; - else - clk_ctrl.pll = 0; - REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl); - - local_irq_enable(); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); -}; - -static int cris_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &cris_freq_table[0]); -} - -static int cris_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int newstate = 0; - - if (cpufreq_frequency_table_target - (policy, cris_freq_table, target_freq, relation, &newstate)) - return -EINVAL; - - cris_freq_set_cpu_state(newstate); - - return 0; -} - -static int cris_freq_cpu_init(struct cpufreq_policy *policy) -{ - int result; - - /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = 1000000; /* 1ms */ - policy->cur = cris_freq_get_cpu_frequency(0); - - result = cpufreq_frequency_table_cpuinfo(policy, cris_freq_table); - if (result) - return (result); - - cpufreq_frequency_table_get_attr(cris_freq_table, policy->cpu); - - return 0; -} - -static int cris_freq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct freq_attr *cris_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver cris_freq_driver = { - .get = cris_freq_get_cpu_frequency, - .verify = cris_freq_verify, - .target = cris_freq_target, - .init = cris_freq_cpu_init, - .exit = cris_freq_cpu_exit, - .name = "cris_freq", - .owner = THIS_MODULE, - .attr = cris_freq_attr, -}; - -static int __init cris_freq_init(void) -{ - int ret; - ret = cpufreq_register_driver(&cris_freq_driver); - cpufreq_register_notifier(&cris_sdram_freq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - return ret; -} - -static int -cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, - void *data) -{ - int i; - struct cpufreq_freqs *freqs = data; - if (val == CPUFREQ_PRECHANGE) { - reg_bif_core_rw_sdram_timing timing = - REG_RD(bif_core, regi_bif_core, rw_sdram_timing); - timing.cpd = (freqs->new == 200000 ? 0 : 1); - - if (freqs->new == 200000) - for (i = 0; i < 50000; i++) ; - REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing); - } - return 0; -} - -module_init(cris_freq_init); diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 9a02f71..152b5f2 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -591,9 +591,9 @@ source "kernel/power/Kconfig" source "drivers/acpi/Kconfig" if PM - -source "arch/ia64/kernel/cpufreq/Kconfig" - +menu "CPU Frequency scaling" +source "drivers/cpufreq/Kconfig" +endmenu endif endmenu diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index d959c84..20678a9 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_NUMA) += numa.o obj-$(CONFIG_PERFMON) += perfmon_default_smpl.o obj-$(CONFIG_IA64_CYCLONE) += cyclone.o -obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_IA64_MCA_RECOVERY) += mca_recovery.o obj-$(CONFIG_KPROBES) += kprobes.o jprobes.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o diff --git a/arch/ia64/kernel/cpufreq/Kconfig b/arch/ia64/kernel/cpufreq/Kconfig deleted file mode 100644 index 2d9d527..0000000 --- a/arch/ia64/kernel/cpufreq/Kconfig +++ /dev/null @@ -1,29 +0,0 @@ - -# -# CPU Frequency scaling -# - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config IA64_ACPI_CPUFREQ - tristate "ACPI Processor P-States driver" - select CPU_FREQ_TABLE - depends on ACPI_PROCESSOR - help - This driver adds a CPUFreq driver which utilizes the ACPI - Processor Performance States. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -endif # CPU_FREQ - -endmenu - diff --git a/arch/ia64/kernel/cpufreq/Makefile b/arch/ia64/kernel/cpufreq/Makefile deleted file mode 100644 index 4838f2a..0000000 --- a/arch/ia64/kernel/cpufreq/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -obj-$(CONFIG_IA64_ACPI_CPUFREQ) += acpi-cpufreq.o - diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c deleted file mode 100644 index f09b174..0000000 --- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c +++ /dev/null @@ -1,437 +0,0 @@ -/* - * arch/ia64/kernel/cpufreq/acpi-cpufreq.c - * This file provides the ACPI based P-state support. This - * module works with generic cpufreq infrastructure. Most of - * the code is based on i386 version - * (arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c) - * - * Copyright (C) 2005 Intel Corp - * Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> - */ - -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/pal.h> - -#include <linux/acpi.h> -#include <acpi/processor.h> - -MODULE_AUTHOR("Venkatesh Pallipadi"); -MODULE_DESCRIPTION("ACPI Processor P-States Driver"); -MODULE_LICENSE("GPL"); - - -struct cpufreq_acpi_io { - struct acpi_processor_performance acpi_data; - struct cpufreq_frequency_table *freq_table; - unsigned int resume; -}; - -static struct cpufreq_acpi_io *acpi_io_data[NR_CPUS]; - -static struct cpufreq_driver acpi_cpufreq_driver; - - -static int -processor_set_pstate ( - u32 value) -{ - s64 retval; - - pr_debug("processor_set_pstate\n"); - - retval = ia64_pal_set_pstate((u64)value); - - if (retval) { - pr_debug("Failed to set freq to 0x%x, with error 0x%lx\n", - value, retval); - return -ENODEV; - } - return (int)retval; -} - - -static int -processor_get_pstate ( - u32 *value) -{ - u64 pstate_index = 0; - s64 retval; - - pr_debug("processor_get_pstate\n"); - - retval = ia64_pal_get_pstate(&pstate_index, - PAL_GET_PSTATE_TYPE_INSTANT); - *value = (u32) pstate_index; - - if (retval) - pr_debug("Failed to get current freq with " - "error 0x%lx, idx 0x%x\n", retval, *value); - - return (int)retval; -} - - -/* To be used only after data->acpi_data is initialized */ -static unsigned -extract_clock ( - struct cpufreq_acpi_io *data, - unsigned value, - unsigned int cpu) -{ - unsigned long i; - - pr_debug("extract_clock\n"); - - for (i = 0; i < data->acpi_data.state_count; i++) { - if (value == data->acpi_data.states[i].status) - return data->acpi_data.states[i].core_frequency; - } - return data->acpi_data.states[i-1].core_frequency; -} - - -static unsigned int -processor_get_freq ( - struct cpufreq_acpi_io *data, - unsigned int cpu) -{ - int ret = 0; - u32 value = 0; - cpumask_t saved_mask; - unsigned long clock_freq; - - pr_debug("processor_get_freq\n"); - - saved_mask = current->cpus_allowed; - set_cpus_allowed_ptr(current, cpumask_of(cpu)); - if (smp_processor_id() != cpu) - goto migrate_end; - - /* processor_get_pstate gets the instantaneous frequency */ - ret = processor_get_pstate(&value); - - if (ret) { - set_cpus_allowed_ptr(current, &saved_mask); - printk(KERN_WARNING "get performance failed with error %d\n", - ret); - ret = 0; - goto migrate_end; - } - clock_freq = extract_clock(data, value, cpu); - ret = (clock_freq*1000); - -migrate_end: - set_cpus_allowed_ptr(current, &saved_mask); - return ret; -} - - -static int -processor_set_freq ( - struct cpufreq_acpi_io *data, - unsigned int cpu, - int state) -{ - int ret = 0; - u32 value = 0; - struct cpufreq_freqs cpufreq_freqs; - cpumask_t saved_mask; - int retval; - - pr_debug("processor_set_freq\n"); - - saved_mask = current->cpus_allowed; - set_cpus_allowed_ptr(current, cpumask_of(cpu)); - if (smp_processor_id() != cpu) { - retval = -EAGAIN; - goto migrate_end; - } - - if (state == data->acpi_data.state) { - if (unlikely(data->resume)) { - pr_debug("Called after resume, resetting to P%d\n", state); - data->resume = 0; - } else { - pr_debug("Already at target state (P%d)\n", state); - retval = 0; - goto migrate_end; - } - } - - pr_debug("Transitioning from P%d to P%d\n", - data->acpi_data.state, state); - - /* cpufreq frequency struct */ - cpufreq_freqs.cpu = cpu; - cpufreq_freqs.old = data->freq_table[data->acpi_data.state].frequency; - cpufreq_freqs.new = data->freq_table[state].frequency; - - /* notify cpufreq */ - cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE); - - /* - * First we write the target state's 'control' value to the - * control_register. - */ - - value = (u32) data->acpi_data.states[state].control; - - pr_debug("Transitioning to state: 0x%08x\n", value); - - ret = processor_set_pstate(value); - if (ret) { - unsigned int tmp = cpufreq_freqs.new; - cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); - cpufreq_freqs.new = cpufreq_freqs.old; - cpufreq_freqs.old = tmp; - cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_PRECHANGE); - cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); - printk(KERN_WARNING "Transition failed with error %d\n", ret); - retval = -ENODEV; - goto migrate_end; - } - - cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE); - - data->acpi_data.state = state; - - retval = 0; - -migrate_end: - set_cpus_allowed_ptr(current, &saved_mask); - return (retval); -} - - -static unsigned int -acpi_cpufreq_get ( - unsigned int cpu) -{ - struct cpufreq_acpi_io *data = acpi_io_data[cpu]; - - pr_debug("acpi_cpufreq_get\n"); - - return processor_get_freq(data, cpu); -} - - -static int -acpi_cpufreq_target ( - struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; - unsigned int next_state = 0; - unsigned int result = 0; - - pr_debug("acpi_cpufreq_setpolicy\n"); - - result = cpufreq_frequency_table_target(policy, - data->freq_table, target_freq, relation, &next_state); - if (result) - return (result); - - result = processor_set_freq(data, policy->cpu, next_state); - - return (result); -} - - -static int -acpi_cpufreq_verify ( - struct cpufreq_policy *policy) -{ - unsigned int result = 0; - struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; - - pr_debug("acpi_cpufreq_verify\n"); - - result = cpufreq_frequency_table_verify(policy, - data->freq_table); - - return (result); -} - - -static int -acpi_cpufreq_cpu_init ( - struct cpufreq_policy *policy) -{ - unsigned int i; - unsigned int cpu = policy->cpu; - struct cpufreq_acpi_io *data; - unsigned int result = 0; - - pr_debug("acpi_cpufreq_cpu_init\n"); - - data = kzalloc(sizeof(struct cpufreq_acpi_io), GFP_KERNEL); - if (!data) - return (-ENOMEM); - - acpi_io_data[cpu] = data; - - result = acpi_processor_register_performance(&data->acpi_data, cpu); - - if (result) - goto err_free; - - /* capability check */ - if (data->acpi_data.state_count <= 1) { - pr_debug("No P-States\n"); - result = -ENODEV; - goto err_unreg; - } - - if ((data->acpi_data.control_register.space_id != - ACPI_ADR_SPACE_FIXED_HARDWARE) || - (data->acpi_data.status_register.space_id != - ACPI_ADR_SPACE_FIXED_HARDWARE)) { - pr_debug("Unsupported address space [%d, %d]\n", - (u32) (data->acpi_data.control_register.space_id), - (u32) (data->acpi_data.status_register.space_id)); - result = -ENODEV; - goto err_unreg; - } - - /* alloc freq_table */ - data->freq_table = kmalloc(sizeof(struct cpufreq_frequency_table) * - (data->acpi_data.state_count + 1), - GFP_KERNEL); - if (!data->freq_table) { - result = -ENOMEM; - goto err_unreg; - } - - /* detect transition latency */ - policy->cpuinfo.transition_latency = 0; - for (i=0; i<data->acpi_data.state_count; i++) { - if ((data->acpi_data.states[i].transition_latency * 1000) > - policy->cpuinfo.transition_latency) { - policy->cpuinfo.transition_latency = - data->acpi_data.states[i].transition_latency * 1000; - } - } - policy->cur = processor_get_freq(data, policy->cpu); - - /* table init */ - for (i = 0; i <= data->acpi_data.state_count; i++) - { - data->freq_table[i].index = i; - if (i < data->acpi_data.state_count) { - data->freq_table[i].frequency = - data->acpi_data.states[i].core_frequency * 1000; - } else { - data->freq_table[i].frequency = CPUFREQ_TABLE_END; - } - } - - result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table); - if (result) { - goto err_freqfree; - } - - /* notify BIOS that we exist */ - acpi_processor_notify_smm(THIS_MODULE); - - printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management " - "activated.\n", cpu); - - for (i = 0; i < data->acpi_data.state_count; i++) - pr_debug(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n", - (i == data->acpi_data.state?'*':' '), i, - (u32) data->acpi_data.states[i].core_frequency, - (u32) data->acpi_data.states[i].power, - (u32) data->acpi_data.states[i].transition_latency, - (u32) data->acpi_data.states[i].bus_master_latency, - (u32) data->acpi_data.states[i].status, - (u32) data->acpi_data.states[i].control); - - cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu); - - /* the first call to ->target() should result in us actually - * writing something to the appropriate registers. */ - data->resume = 1; - - return (result); - - err_freqfree: - kfree(data->freq_table); - err_unreg: - acpi_processor_unregister_performance(&data->acpi_data, cpu); - err_free: - kfree(data); - acpi_io_data[cpu] = NULL; - - return (result); -} - - -static int -acpi_cpufreq_cpu_exit ( - struct cpufreq_policy *policy) -{ - struct cpufreq_acpi_io *data = acpi_io_data[policy->cpu]; - - pr_debug("acpi_cpufreq_cpu_exit\n"); - - if (data) { - cpufreq_frequency_table_put_attr(policy->cpu); - acpi_io_data[policy->cpu] = NULL; - acpi_processor_unregister_performance(&data->acpi_data, - policy->cpu); - kfree(data); - } - - return (0); -} - - -static struct freq_attr* acpi_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - - -static struct cpufreq_driver acpi_cpufreq_driver = { - .verify = acpi_cpufreq_verify, - .target = acpi_cpufreq_target, - .get = acpi_cpufreq_get, - .init = acpi_cpufreq_cpu_init, - .exit = acpi_cpufreq_cpu_exit, - .name = "acpi-cpufreq", - .owner = THIS_MODULE, - .attr = acpi_cpufreq_attr, -}; - - -static int __init -acpi_cpufreq_init (void) -{ - pr_debug("acpi_cpufreq_init\n"); - - return cpufreq_register_driver(&acpi_cpufreq_driver); -} - - -static void __exit -acpi_cpufreq_exit (void) -{ - pr_debug("acpi_cpufreq_exit\n"); - - cpufreq_unregister_driver(&acpi_cpufreq_driver); - return; -} - - -late_initcall(acpi_cpufreq_init); -module_exit(acpi_cpufreq_exit); - diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 51244bf..26d21d3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -2538,7 +2538,14 @@ source "kernel/power/Kconfig" endmenu -source "arch/mips/kernel/cpufreq/Kconfig" +config MIPS_EXTERNAL_TIMER + bool + +if CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER +menu "CPU Power Management" +source "drivers/cpufreq/Kconfig" +endmenu +endif source "net/Kconfig" diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index de75fb5..520a908 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -92,8 +92,6 @@ CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/n obj-$(CONFIG_HAVE_STD_PC_SERIAL_PORT) += 8250-platform.o -obj-$(CONFIG_MIPS_CPUFREQ) += cpufreq/ - obj-$(CONFIG_PERF_EVENTS) += perf_event.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_mipsxx.o diff --git a/arch/mips/kernel/cpufreq/Kconfig b/arch/mips/kernel/cpufreq/Kconfig deleted file mode 100644 index 58c601e..0000000 --- a/arch/mips/kernel/cpufreq/Kconfig +++ /dev/null @@ -1,41 +0,0 @@ -# -# CPU Frequency scaling -# - -config MIPS_EXTERNAL_TIMER - bool - -config MIPS_CPUFREQ - bool - default y - depends on CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER - -if MIPS_CPUFREQ - -menu "CPU Frequency scaling" - -source "drivers/cpufreq/Kconfig" - -if CPU_FREQ - -comment "CPUFreq processor drivers" - -config LOONGSON2_CPUFREQ - tristate "Loongson2 CPUFreq Driver" - select CPU_FREQ_TABLE - depends on MIPS_CPUFREQ - help - This option adds a CPUFreq driver for loongson processors which - support software configurable cpu frequency. - - Loongson2F and it's successors support this feature. - - For details, take a look at <file:Documentation/cpu-freq/>. - - If in doubt, say N. - -endif # CPU_FREQ - -endmenu - -endif # MIPS_CPUFREQ diff --git a/arch/mips/kernel/cpufreq/Makefile b/arch/mips/kernel/cpufreq/Makefile deleted file mode 100644 index 05a5715..0000000 --- a/arch/mips/kernel/cpufreq/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Linux/MIPS cpufreq. -# - -obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o diff --git a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c b/arch/mips/kernel/cpufreq/loongson2_cpufreq.c deleted file mode 100644 index 3237c52..0000000 --- a/arch/mips/kernel/cpufreq/loongson2_cpufreq.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * Cpufreq driver for the loongson-2 processors - * - * The 2E revision of loongson processor not support this feature. - * - * Copyright (C) 2006 - 2008 Lemote Inc. & Insititute of Computing Technology - * Author: Yanhua, yanh@lemote.com - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/cpufreq.h> -#include <linux/module.h> -#include <linux/err.h> -#include <linux/sched.h> /* set_cpus_allowed() */ -#include <linux/delay.h> -#include <linux/platform_device.h> - -#include <asm/clock.h> - -#include <asm/mach-loongson/loongson.h> - -static uint nowait; - -static struct clk *cpuclk; - -static void (*saved_cpu_wait) (void); - -static int loongson2_cpu_freq_notifier(struct notifier_block *nb, - unsigned long val, void *data); - -static struct notifier_block loongson2_cpufreq_notifier_block = { - .notifier_call = loongson2_cpu_freq_notifier -}; - -static int loongson2_cpu_freq_notifier(struct notifier_block *nb, - unsigned long val, void *data) -{ - if (val == CPUFREQ_POSTCHANGE) - current_cpu_data.udelay_val = loops_per_jiffy; - - return 0; -} - -static unsigned int loongson2_cpufreq_get(unsigned int cpu) -{ - return clk_get_rate(cpuclk); -} - -/* - * Here we notify other drivers of the proposed change and the final change. - */ -static int loongson2_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int cpu = policy->cpu; - unsigned int newstate = 0; - cpumask_t cpus_allowed; - struct cpufreq_freqs freqs; - unsigned int freq; - - if (!cpu_online(cpu)) - return -ENODEV; - - cpus_allowed = current->cpus_allowed; - set_cpus_allowed_ptr(current, cpumask_of(cpu)); - - if (cpufreq_frequency_table_target - (policy, &loongson2_clockmod_table[0], target_freq, relation, - &newstate)) - return -EINVAL; - - freq = - ((cpu_clock_freq / 1000) * - loongson2_clockmod_table[newstate].index) / 8; - if (freq < policy->min || freq > policy->max) - return -EINVAL; - - pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000); - - freqs.cpu = cpu; - freqs.old = loongson2_cpufreq_get(cpu); - freqs.new = freq; - freqs.flags = 0; - - if (freqs.new == freqs.old) - return 0; - - /* notifiers */ - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - set_cpus_allowed_ptr(current, &cpus_allowed); - - /* setting the cpu frequency */ - clk_set_rate(cpuclk, freq); - - /* notifiers */ - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - pr_debug("cpufreq: set frequency %u kHz\n", freq); - - return 0; -} - -static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - int i; - unsigned long rate; - int ret; - - if (!cpu_online(policy->cpu)) - return -ENODEV; - - cpuclk = clk_get(NULL, "cpu_clk"); - if (IS_ERR(cpuclk)) { - printk(KERN_ERR "cpufreq: couldn't get CPU clk\n"); - return PTR_ERR(cpuclk); - } - - rate = cpu_clock_freq / 1000; - if (!rate) { - clk_put(cpuclk); - return -EINVAL; - } - ret = clk_set_rate(cpuclk, rate); - if (ret) { - clk_put(cpuclk); - return ret; - } - - /* clock table init */ - for (i = 2; - (loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END); - i++) - loongson2_clockmod_table[i].frequency = (rate * i) / 8; - - policy->cur = loongson2_cpufreq_get(policy->cpu); - - cpufreq_frequency_table_get_attr(&loongson2_clockmod_table[0], - policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, - &loongson2_clockmod_table[0]); -} - -static int loongson2_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - &loongson2_clockmod_table[0]); -} - -static int loongson2_cpufreq_exit(struct cpufreq_policy *policy) -{ - clk_put(cpuclk); - return 0; -} - -static struct freq_attr *loongson2_table_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver loongson2_cpufreq_driver = { - .owner = THIS_MODULE, - .name = "loongson2", - .init = loongson2_cpufreq_cpu_init, - .verify = loongson2_cpufreq_verify, - .target = loongson2_cpufreq_target, - .get = loongson2_cpufreq_get, - .exit = loongson2_cpufreq_exit, - .attr = loongson2_table_attr, -}; - -static struct platform_device_id platform_device_ids[] = { - { - .name = "loongson2_cpufreq", - }, - {} -}; - -MODULE_DEVICE_TABLE(platform, platform_device_ids); - -static struct platform_driver platform_driver = { - .driver = { - .name = "loongson2_cpufreq", - .owner = THIS_MODULE, - }, - .id_table = platform_device_ids, -}; - -/* - * This is the simple version of Loongson-2 wait, Maybe we need do this in - * interrupt disabled context. - */ - -static DEFINE_SPINLOCK(loongson2_wait_lock); - -static void loongson2_cpu_wait(void) -{ - unsigned long flags; - u32 cpu_freq; - - spin_lock_irqsave(&loongson2_wait_lock, flags); - cpu_freq = LOONGSON_CHIPCFG0; - LOONGSON_CHIPCFG0 &= ~0x7; /* Put CPU into wait mode */ - LOONGSON_CHIPCFG0 = cpu_freq; /* Restore CPU state */ - spin_unlock_irqrestore(&loongson2_wait_lock, flags); -} - -static int __init cpufreq_init(void) -{ - int ret; - - /* Register platform stuff */ - ret = platform_driver_register(&platform_driver); - if (ret) - return ret; - - pr_info("cpufreq: Loongson-2F CPU frequency driver.\n"); - - cpufreq_register_notifier(&loongson2_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - - ret = cpufreq_register_driver(&loongson2_cpufreq_driver); - - if (!ret && !nowait) { - saved_cpu_wait = cpu_wait; - cpu_wait = loongson2_cpu_wait; - } - - return ret; -} - -static void __exit cpufreq_exit(void) -{ - if (!nowait && saved_cpu_wait) - cpu_wait = saved_cpu_wait; - cpufreq_unregister_driver(&loongson2_cpufreq_driver); - cpufreq_unregister_notifier(&loongson2_cpufreq_notifier_block, - CPUFREQ_TRANSITION_NOTIFIER); - - platform_driver_unregister(&platform_driver); -} - -module_init(cpufreq_init); -module_exit(cpufreq_exit); - -module_param(nowait, uint, 0644); -MODULE_PARM_DESC(nowait, "Disable Loongson-2F specific wait"); - -MODULE_AUTHOR("Yanhua <yanh@lemote.com>"); -MODULE_DESCRIPTION("cpufreq driver for Loongson2F"); -MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 53aaefe..9978f59 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -113,34 +113,10 @@ config CBE_THERM default m depends on CBE_RAS && SPU_BASE -config CBE_CPUFREQ - tristate "CBE frequency scaling" - depends on CBE_RAS && CPU_FREQ - default m - help - This adds the cpufreq driver for Cell BE processors. - For details, take a look at <file:Documentation/cpu-freq/>. - If you don't have such processor, say N - -config CBE_CPUFREQ_PMI_ENABLE - bool "CBE frequency scaling using PMI interface" - depends on CBE_CPUFREQ - default n - help - Select this, if you want to use the PMI interface - to switch frequencies. Using PMI, the - processor will not only be able to run at lower speed, - but also at lower core voltage. - -config CBE_CPUFREQ_PMI - tristate - depends on CBE_CPUFREQ_PMI_ENABLE - default CBE_CPUFREQ - config PPC_PMI tristate default y - depends on CBE_CPUFREQ_PMI || PPC_IBM_CELL_POWERBUTTON + depends on CPU_FREQ_CBE_PMI || PPC_IBM_CELL_POWERBUTTON help PMI (Platform Management Interrupt) is a way to communicate with the BMC (Baseboard Management Controller). diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile index a4a8935..fe053e7 100644 --- a/arch/powerpc/platforms/cell/Makefile +++ b/arch/powerpc/platforms/cell/Makefile @@ -5,9 +5,6 @@ obj-$(CONFIG_PPC_CELL_NATIVE) += iommu.o setup.o spider-pic.o \ obj-$(CONFIG_CBE_RAS) += ras.o obj-$(CONFIG_CBE_THERM) += cbe_thermal.o -obj-$(CONFIG_CBE_CPUFREQ_PMI) += cbe_cpufreq_pmi.o -obj-$(CONFIG_CBE_CPUFREQ) += cbe-cpufreq.o -cbe-cpufreq-y += cbe_cpufreq_pervasive.o cbe_cpufreq.o obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR) += cpufreq_spudemand.o obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON) += cbe_powerbutton.o diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c deleted file mode 100644 index d4c39e3..0000000 --- a/arch/powerpc/platforms/cell/cbe_cpufreq.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * cpufreq driver for the cell processor - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 - * - * Author: Christian Krafft <krafft@de.ibm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/cpufreq.h> -#include <linux/module.h> -#include <linux/of_platform.h> - -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/cell-regs.h> -#include "cbe_cpufreq.h" - -static DEFINE_MUTEX(cbe_switch_mutex); - - -/* the CBE supports an 8 step frequency scaling */ -static struct cpufreq_frequency_table cbe_freqs[] = { - {1, 0}, - {2, 0}, - {3, 0}, - {4, 0}, - {5, 0}, - {6, 0}, - {8, 0}, - {10, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -/* - * hardware specific functions - */ - -static int set_pmode(unsigned int cpu, unsigned int slow_mode) -{ - int rc; - - if (cbe_cpufreq_has_pmi) - rc = cbe_cpufreq_set_pmode_pmi(cpu, slow_mode); - else - rc = cbe_cpufreq_set_pmode(cpu, slow_mode); - - pr_debug("register contains slow mode %d\n", cbe_cpufreq_get_pmode(cpu)); - - return rc; -} - -/* - * cpufreq functions - */ - -static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - const u32 *max_freqp; - u32 max_freq; - int i, cur_pmode; - struct device_node *cpu; - - cpu = of_get_cpu_node(policy->cpu, NULL); - - if (!cpu) - return -ENODEV; - - pr_debug("init cpufreq on CPU %d\n", policy->cpu); - - /* - * Let's check we can actually get to the CELL regs - */ - if (!cbe_get_cpu_pmd_regs(policy->cpu) || - !cbe_get_cpu_mic_tm_regs(policy->cpu)) { - pr_info("invalid CBE regs pointers for cpufreq\n"); - return -EINVAL; - } - - max_freqp = of_get_property(cpu, "clock-frequency", NULL); - - of_node_put(cpu); - - if (!max_freqp) - return -EINVAL; - - /* we need the freq in kHz */ - max_freq = *max_freqp / 1000; - - pr_debug("max clock-frequency is at %u kHz\n", max_freq); - pr_debug("initializing frequency table\n"); - - /* initialize frequency table */ - for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index; - pr_debug("%d: %d\n", i, cbe_freqs[i].frequency); - } - - /* if DEBUG is enabled set_pmode() measures the latency - * of a transition */ - policy->cpuinfo.transition_latency = 25000; - - cur_pmode = cbe_cpufreq_get_pmode(policy->cpu); - pr_debug("current pmode is at %d\n",cur_pmode); - - policy->cur = cbe_freqs[cur_pmode].frequency; - -#ifdef CONFIG_SMP - cpumask_copy(policy->cpus, cpu_sibling_mask(policy->cpu)); -#endif - - cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu); - - /* this ensures that policy->cpuinfo_min - * and policy->cpuinfo_max are set correctly */ - return cpufreq_frequency_table_cpuinfo(policy, cbe_freqs); -} - -static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static int cbe_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, cbe_freqs); -} - -static int cbe_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - int rc; - struct cpufreq_freqs freqs; - unsigned int cbe_pmode_new; - - cpufreq_frequency_table_target(policy, - cbe_freqs, - target_freq, - relation, - &cbe_pmode_new); - - freqs.old = policy->cur; - freqs.new = cbe_freqs[cbe_pmode_new].frequency; - freqs.cpu = policy->cpu; - - mutex_lock(&cbe_switch_mutex); - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - pr_debug("setting frequency for cpu %d to %d kHz, " \ - "1/%d of max frequency\n", - policy->cpu, - cbe_freqs[cbe_pmode_new].frequency, - cbe_freqs[cbe_pmode_new].index); - - rc = set_pmode(policy->cpu, cbe_pmode_new); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - mutex_unlock(&cbe_switch_mutex); - - return rc; -} - -static struct cpufreq_driver cbe_cpufreq_driver = { - .verify = cbe_cpufreq_verify, - .target = cbe_cpufreq_target, - .init = cbe_cpufreq_cpu_init, - .exit = cbe_cpufreq_cpu_exit, - .name = "cbe-cpufreq", - .owner = THIS_MODULE, - .flags = CPUFREQ_CONST_LOOPS, -}; - -/* - * module init and destoy - */ - -static int __init cbe_cpufreq_init(void) -{ - if (!machine_is(cell)) - return -ENODEV; - - return cpufreq_register_driver(&cbe_cpufreq_driver); -} - -static void __exit cbe_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&cbe_cpufreq_driver); -} - -module_init(cbe_cpufreq_init); -module_exit(cbe_cpufreq_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>"); diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.h b/arch/powerpc/platforms/cell/cbe_cpufreq.h deleted file mode 100644 index c1d86bf..0000000 --- a/arch/powerpc/platforms/cell/cbe_cpufreq.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * cbe_cpufreq.h - * - * This file contains the definitions used by the cbe_cpufreq driver. - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 - * - * Author: Christian Krafft <krafft@de.ibm.com> - * - */ - -#include <linux/cpufreq.h> -#include <linux/types.h> - -int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode); -int cbe_cpufreq_get_pmode(int cpu); - -int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode); - -#if defined(CONFIG_CBE_CPUFREQ_PMI) || defined(CONFIG_CBE_CPUFREQ_PMI_MODULE) -extern bool cbe_cpufreq_has_pmi; -#else -#define cbe_cpufreq_has_pmi (0) -#endif diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c deleted file mode 100644 index 20472e4..0000000 --- a/arch/powerpc/platforms/cell/cbe_cpufreq_pervasive.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * pervasive backend for the cbe_cpufreq driver - * - * This driver makes use of the pervasive unit to - * engage the desired frequency. - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 - * - * Author: Christian Krafft <krafft@de.ibm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/time.h> -#include <asm/machdep.h> -#include <asm/hw_irq.h> -#include <asm/cell-regs.h> - -#include "cbe_cpufreq.h" - -/* to write to MIC register */ -static u64 MIC_Slow_Fast_Timer_table[] = { - [0 ... 7] = 0x007fc00000000000ull, -}; - -/* more values for the MIC */ -static u64 MIC_Slow_Next_Timer_table[] = { - 0x0000240000000000ull, - 0x0000268000000000ull, - 0x000029C000000000ull, - 0x00002D0000000000ull, - 0x0000300000000000ull, - 0x0000334000000000ull, - 0x000039C000000000ull, - 0x00003FC000000000ull, -}; - - -int cbe_cpufreq_set_pmode(int cpu, unsigned int pmode) -{ - struct cbe_pmd_regs __iomem *pmd_regs; - struct cbe_mic_tm_regs __iomem *mic_tm_regs; - unsigned long flags; - u64 value; -#ifdef DEBUG - long time; -#endif - - local_irq_save(flags); - - mic_tm_regs = cbe_get_cpu_mic_tm_regs(cpu); - pmd_regs = cbe_get_cpu_pmd_regs(cpu); - -#ifdef DEBUG - time = jiffies; -#endif - - out_be64(&mic_tm_regs->slow_fast_timer_0, MIC_Slow_Fast_Timer_table[pmode]); - out_be64(&mic_tm_regs->slow_fast_timer_1, MIC_Slow_Fast_Timer_table[pmode]); - - out_be64(&mic_tm_regs->slow_next_timer_0, MIC_Slow_Next_Timer_table[pmode]); - out_be64(&mic_tm_regs->slow_next_timer_1, MIC_Slow_Next_Timer_table[pmode]); - - value = in_be64(&pmd_regs->pmcr); - /* set bits to zero */ - value &= 0xFFFFFFFFFFFFFFF8ull; - /* set bits to next pmode */ - value |= pmode; - - out_be64(&pmd_regs->pmcr, value); - -#ifdef DEBUG - /* wait until new pmode appears in status register */ - value = in_be64(&pmd_regs->pmsr) & 0x07; - while (value != pmode) { - cpu_relax(); - value = in_be64(&pmd_regs->pmsr) & 0x07; - } - - time = jiffies - time; - time = jiffies_to_msecs(time); - pr_debug("had to wait %lu ms for a transition using " \ - "pervasive unit\n", time); -#endif - local_irq_restore(flags); - - return 0; -} - - -int cbe_cpufreq_get_pmode(int cpu) -{ - int ret; - struct cbe_pmd_regs __iomem *pmd_regs; - - pmd_regs = cbe_get_cpu_pmd_regs(cpu); - ret = in_be64(&pmd_regs->pmsr) & 0x07; - - return ret; -} - diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c deleted file mode 100644 index 60a07a4..0000000 --- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * pmi backend for the cbe_cpufreq driver - * - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007 - * - * Author: Christian Krafft <krafft@de.ibm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/timer.h> -#include <linux/module.h> -#include <linux/of_platform.h> - -#include <asm/processor.h> -#include <asm/prom.h> -#include <asm/pmi.h> -#include <asm/cell-regs.h> - -#ifdef DEBUG -#include <asm/time.h> -#endif - -#include "cbe_cpufreq.h" - -static u8 pmi_slow_mode_limit[MAX_CBE]; - -bool cbe_cpufreq_has_pmi = false; -EXPORT_SYMBOL_GPL(cbe_cpufreq_has_pmi); - -/* - * hardware specific functions - */ - -int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode) -{ - int ret; - pmi_message_t pmi_msg; -#ifdef DEBUG - long time; -#endif - pmi_msg.type = PMI_TYPE_FREQ_CHANGE; - pmi_msg.data1 = cbe_cpu_to_node(cpu); - pmi_msg.data2 = pmode; - -#ifdef DEBUG - time = jiffies; -#endif - pmi_send_message(pmi_msg); - -#ifdef DEBUG - time = jiffies - time; - time = jiffies_to_msecs(time); - pr_debug("had to wait %lu ms for a transition using " \ - "PMI\n", time); -#endif - ret = pmi_msg.data2; - pr_debug("PMI returned slow mode %d\n", ret); - - return ret; -} -EXPORT_SYMBOL_GPL(cbe_cpufreq_set_pmode_pmi); - - -static void cbe_cpufreq_handle_pmi(pmi_message_t pmi_msg) -{ - u8 node, slow_mode; - - BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE); - - node = pmi_msg.data1; - slow_mode = pmi_msg.data2; - - pmi_slow_mode_limit[node] = slow_mode; - - pr_debug("cbe_handle_pmi: node: %d max_freq: %d\n", node, slow_mode); -} - -static int pmi_notifier(struct notifier_block *nb, - unsigned long event, void *data) -{ - struct cpufreq_policy *policy = data; - struct cpufreq_frequency_table *cbe_freqs; - u8 node; - - /* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE - * and CPUFREQ_NOTIFY policy events?) - */ - if (event == CPUFREQ_START) - return 0; - - cbe_freqs = cpufreq_frequency_get_table(policy->cpu); - node = cbe_cpu_to_node(policy->cpu); - - pr_debug("got notified, event=%lu, node=%u\n", event, node); - - if (pmi_slow_mode_limit[node] != 0) { - pr_debug("limiting node %d to slow mode %d\n", - node, pmi_slow_mode_limit[node]); - - cpufreq_verify_within_limits(policy, 0, - - cbe_freqs[pmi_slow_mode_limit[node]].frequency); - } - - return 0; -} - -static struct notifier_block pmi_notifier_block = { - .notifier_call = pmi_notifier, -}; - -static struct pmi_handler cbe_pmi_handler = { - .type = PMI_TYPE_FREQ_CHANGE, - .handle_pmi_message = cbe_cpufreq_handle_pmi, -}; - - - -static int __init cbe_cpufreq_pmi_init(void) -{ - cbe_cpufreq_has_pmi = pmi_register_handler(&cbe_pmi_handler) == 0; - - if (!cbe_cpufreq_has_pmi) - return -ENODEV; - - cpufreq_register_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); - - return 0; -} - -static void __exit cbe_cpufreq_pmi_exit(void) -{ - cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER); - pmi_unregister_handler(&cbe_pmi_handler); -} - -module_init(cbe_cpufreq_pmi_init); -module_exit(cbe_cpufreq_pmi_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>"); diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c index 890f30e..be1e795 100644 --- a/arch/powerpc/platforms/pasemi/cpufreq.c +++ b/arch/powerpc/platforms/pasemi/cpufreq.c @@ -273,10 +273,9 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy, freqs.old = policy->cur; freqs.new = pas_freqs[pas_astate_new].frequency; - freqs.cpu = policy->cpu; mutex_lock(&pas_switch_mutex); - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", policy->cpu, @@ -288,7 +287,7 @@ static int pas_cpufreq_target(struct cpufreq_policy *policy, for_each_online_cpu(i) set_astate(i, pas_astate_new); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); mutex_unlock(&pas_switch_mutex); ppc_proc_freq = freqs.new * 1000ul; diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index 311b804..3104fad 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -335,7 +335,8 @@ static int pmu_set_cpu_speed(int low_speed) return 0; } -static int do_set_cpu_speed(int speed_mode, int notify) +static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode, + int notify) { struct cpufreq_freqs freqs; unsigned long l3cr; @@ -343,13 +344,12 @@ static int do_set_cpu_speed(int speed_mode, int notify) freqs.old = cur_freq; freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - freqs.cpu = smp_processor_id(); if (freqs.old == freqs.new) return 0; if (notify) - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); if (speed_mode == CPUFREQ_LOW && cpu_has_feature(CPU_FTR_L3CR)) { l3cr = _get_L3CR(); @@ -366,7 +366,7 @@ static int do_set_cpu_speed(int speed_mode, int notify) _set_L3CR(prev_l3cr); } if (notify) - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; return 0; @@ -393,7 +393,7 @@ static int pmac_cpufreq_target( struct cpufreq_policy *policy, target_freq, relation, &newstate)) return -EINVAL; - rc = do_set_cpu_speed(newstate, 1); + rc = do_set_cpu_speed(policy, newstate, 1); ppc_proc_freq = cur_freq * 1000ul; return rc; @@ -442,7 +442,7 @@ static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) no_schedule = 1; sleep_freq = cur_freq; if (cur_freq == low_freq && !is_pmu_based) - do_set_cpu_speed(CPUFREQ_HIGH, 0); + do_set_cpu_speed(policy, CPUFREQ_HIGH, 0); return 0; } @@ -458,7 +458,7 @@ static int pmac_cpufreq_resume(struct cpufreq_policy *policy) * is that we force a switch to whatever it was, which is * probably high speed due to our suspend() routine */ - do_set_cpu_speed(sleep_freq == low_freq ? + do_set_cpu_speed(policy, sleep_freq == low_freq ? CPUFREQ_LOW : CPUFREQ_HIGH, 0); ppc_proc_freq = cur_freq * 1000ul; diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index 9650c60..7ba4234 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -339,11 +339,10 @@ static int g5_cpufreq_target(struct cpufreq_policy *policy, freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; freqs.new = g5_cpu_freqs[newstate].frequency; - freqs.cpu = 0; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); rc = g5_switch_freq(newstate); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); mutex_unlock(&g5_switch_mutex); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5e85963..06e3163 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -624,25 +624,7 @@ config SH_CLK_CPG_LEGACY endmenu menu "CPU Frequency scaling" - source "drivers/cpufreq/Kconfig" - -config SH_CPU_FREQ - tristate "SuperH CPU Frequency driver" - depends on CPU_FREQ - select CPU_FREQ_TABLE - help - This adds the cpufreq driver for SuperH. Any CPU that supports - clock rate rounding through the clock framework can use this - driver. While it will make the kernel slightly larger, this is - harmless for CPUs that don't support rate rounding. The driver - will also generate a notice in the boot log before disabling - itself if the CPU in question is not capable of rate rounding. - - For details, take a look at <file:Documentation/cpu-freq>. - - If unsure, say N. - endmenu source "arch/sh/drivers/Kconfig" diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index f259b37..261c8bf 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -31,7 +31,6 @@ obj-$(CONFIG_VSYSCALL) += vsyscall/ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o obj-$(CONFIG_KGDB) += kgdb.o -obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o obj-$(CONFIG_MODULES) += sh_ksyms_$(BITS).o module.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o diff --git a/arch/sh/kernel/cpufreq.c b/arch/sh/kernel/cpufreq.c deleted file mode 100644 index e68b45b..0000000 --- a/arch/sh/kernel/cpufreq.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * arch/sh/kernel/cpufreq.c - * - * cpufreq driver for the SuperH processors. - * - * Copyright (C) 2002 - 2012 Paul Mundt - * Copyright (C) 2002 M. R. Brown - * - * Clock framework bits from arch/avr32/mach-at32ap/cpufreq.c - * - * Copyright (C) 2004-2007 Atmel Corporation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#define pr_fmt(fmt) "cpufreq: " fmt - -#include <linux/types.h> -#include <linux/cpufreq.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/cpumask.h> -#include <linux/cpu.h> -#include <linux/smp.h> -#include <linux/sched.h> /* set_cpus_allowed() */ -#include <linux/clk.h> -#include <linux/percpu.h> -#include <linux/sh_clk.h> - -static DEFINE_PER_CPU(struct clk, sh_cpuclk); - -static unsigned int sh_cpufreq_get(unsigned int cpu) -{ - return (clk_get_rate(&per_cpu(sh_cpuclk, cpu)) + 500) / 1000; -} - -/* - * Here we notify other drivers of the proposed change and the final change. - */ -static int sh_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int cpu = policy->cpu; - struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu); - cpumask_t cpus_allowed; - struct cpufreq_freqs freqs; - struct device *dev; - long freq; - - if (!cpu_online(cpu)) - return -ENODEV; - - cpus_allowed = current->cpus_allowed; - set_cpus_allowed_ptr(current, cpumask_of(cpu)); - - BUG_ON(smp_processor_id() != cpu); - - dev = get_cpu_device(cpu); - - /* Convert target_freq from kHz to Hz */ - freq = clk_round_rate(cpuclk, target_freq * 1000); - - if (freq < (policy->min * 1000) || freq > (policy->max * 1000)) - return -EINVAL; - - dev_dbg(dev, "requested frequency %u Hz\n", target_freq * 1000); - - freqs.cpu = cpu; - freqs.old = sh_cpufreq_get(cpu); - freqs.new = (freq + 500) / 1000; - freqs.flags = 0; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - set_cpus_allowed_ptr(current, &cpus_allowed); - clk_set_rate(cpuclk, freq); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - dev_dbg(dev, "set frequency %lu Hz\n", freq); - - return 0; -} - -static int sh_cpufreq_verify(struct cpufreq_policy *policy) -{ - struct clk *cpuclk = &per_cpu(sh_cpuclk, policy->cpu); - struct cpufreq_frequency_table *freq_table; - - freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL; - if (freq_table) - return cpufreq_frequency_table_verify(policy, freq_table); - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - policy->min = (clk_round_rate(cpuclk, 1) + 500) / 1000; - policy->max = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; - - cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, - policy->cpuinfo.max_freq); - - return 0; -} - -static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu); - struct cpufreq_frequency_table *freq_table; - struct device *dev; - - if (!cpu_online(cpu)) - return -ENODEV; - - dev = get_cpu_device(cpu); - - cpuclk = clk_get(dev, "cpu_clk"); - if (IS_ERR(cpuclk)) { - dev_err(dev, "couldn't get CPU clk\n"); - return PTR_ERR(cpuclk); - } - - policy->cur = policy->min = policy->max = sh_cpufreq_get(cpu); - - freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL; - if (freq_table) { - int result; - - result = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (!result) - cpufreq_frequency_table_get_attr(freq_table, cpu); - } else { - dev_notice(dev, "no frequency table found, falling back " - "to rate rounding.\n"); - - policy->cpuinfo.min_freq = - (clk_round_rate(cpuclk, 1) + 500) / 1000; - policy->cpuinfo.max_freq = - (clk_round_rate(cpuclk, ~0UL) + 500) / 1000; - } - - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - - dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, " - "Maximum %u.%03u MHz.\n", - policy->min / 1000, policy->min % 1000, - policy->max / 1000, policy->max % 1000); - - return 0; -} - -static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - struct clk *cpuclk = &per_cpu(sh_cpuclk, cpu); - - cpufreq_frequency_table_put_attr(cpu); - clk_put(cpuclk); - - return 0; -} - -static struct freq_attr *sh_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver sh_cpufreq_driver = { - .owner = THIS_MODULE, - .name = "sh", - .get = sh_cpufreq_get, - .target = sh_cpufreq_target, - .verify = sh_cpufreq_verify, - .init = sh_cpufreq_cpu_init, - .exit = sh_cpufreq_cpu_exit, - .attr = sh_freq_attr, -}; - -static int __init sh_cpufreq_module_init(void) -{ - pr_notice("SuperH CPU frequency driver.\n"); - return cpufreq_register_driver(&sh_cpufreq_driver); -} - -static void __exit sh_cpufreq_module_exit(void) -{ - cpufreq_unregister_driver(&sh_cpufreq_driver); -} - -module_init(sh_cpufreq_module_init); -module_exit(sh_cpufreq_module_exit); - -MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>"); -MODULE_DESCRIPTION("cpufreq driver for SuperH"); -MODULE_LICENSE("GPL"); diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 3d361f2..c85b761 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -254,29 +254,6 @@ config HOTPLUG_CPU if SPARC64 source "drivers/cpufreq/Kconfig" - -config US3_FREQ - tristate "UltraSPARC-III CPU Frequency driver" - depends on CPU_FREQ - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for UltraSPARC-III processors. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - -config US2E_FREQ - tristate "UltraSPARC-IIe CPU Frequency driver" - depends on CPU_FREQ - select CPU_FREQ_TABLE - help - This adds the CPUFreq driver for UltraSPARC-IIe processors. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - endif config US3_MC diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 6cf591b..5276fd4 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -102,9 +102,6 @@ obj-$(CONFIG_PCI_MSI) += pci_msi.o obj-$(CONFIG_COMPAT) += sys32.o sys_sparc32.o signal32.o -# sparc64 cpufreq -obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o -obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o obj-$(CONFIG_US3_MC) += chmc.o obj-$(CONFIG_KPROBES) += kprobes.o diff --git a/arch/sparc/kernel/us2e_cpufreq.c b/arch/sparc/kernel/us2e_cpufreq.c deleted file mode 100644 index 489fc15..0000000 --- a/arch/sparc/kernel/us2e_cpufreq.c +++ /dev/null @@ -1,413 +0,0 @@ -/* us2e_cpufreq.c: UltraSPARC-IIe cpu frequency support - * - * Copyright (C) 2003 David S. Miller (davem@redhat.com) - * - * Many thanks to Dominik Brodowski for fixing up the cpufreq - * infrastructure in order to make this driver easier to implement. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/cpufreq.h> -#include <linux/threads.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/init.h> - -#include <asm/asi.h> -#include <asm/timer.h> - -static struct cpufreq_driver *cpufreq_us2e_driver; - -struct us2e_freq_percpu_info { - struct cpufreq_frequency_table table[6]; -}; - -/* Indexed by cpu number. */ -static struct us2e_freq_percpu_info *us2e_freq_table; - -#define HBIRD_MEM_CNTL0_ADDR 0x1fe0000f010UL -#define HBIRD_ESTAR_MODE_ADDR 0x1fe0000f080UL - -/* UltraSPARC-IIe has five dividers: 1, 2, 4, 6, and 8. These are controlled - * in the ESTAR mode control register. - */ -#define ESTAR_MODE_DIV_1 0x0000000000000000UL -#define ESTAR_MODE_DIV_2 0x0000000000000001UL -#define ESTAR_MODE_DIV_4 0x0000000000000003UL -#define ESTAR_MODE_DIV_6 0x0000000000000002UL -#define ESTAR_MODE_DIV_8 0x0000000000000004UL -#define ESTAR_MODE_DIV_MASK 0x0000000000000007UL - -#define MCTRL0_SREFRESH_ENAB 0x0000000000010000UL -#define MCTRL0_REFR_COUNT_MASK 0x0000000000007f00UL -#define MCTRL0_REFR_COUNT_SHIFT 8 -#define MCTRL0_REFR_INTERVAL 7800 -#define MCTRL0_REFR_CLKS_P_CNT 64 - -static unsigned long read_hbreg(unsigned long addr) -{ - unsigned long ret; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=&r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); - return ret; -} - -static void write_hbreg(unsigned long addr, unsigned long val) -{ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" - "membar #Sync" - : /* no outputs */ - : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) - : "memory"); - if (addr == HBIRD_ESTAR_MODE_ADDR) { - /* Need to wait 16 clock cycles for the PLL to lock. */ - udelay(1); - } -} - -static void self_refresh_ctl(int enable) -{ - unsigned long mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR); - - if (enable) - mctrl |= MCTRL0_SREFRESH_ENAB; - else - mctrl &= ~MCTRL0_SREFRESH_ENAB; - write_hbreg(HBIRD_MEM_CNTL0_ADDR, mctrl); - (void) read_hbreg(HBIRD_MEM_CNTL0_ADDR); -} - -static void frob_mem_refresh(int cpu_slowing_down, - unsigned long clock_tick, - unsigned long old_divisor, unsigned long divisor) -{ - unsigned long old_refr_count, refr_count, mctrl; - - refr_count = (clock_tick * MCTRL0_REFR_INTERVAL); - refr_count /= (MCTRL0_REFR_CLKS_P_CNT * divisor * 1000000000UL); - - mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR); - old_refr_count = (mctrl & MCTRL0_REFR_COUNT_MASK) - >> MCTRL0_REFR_COUNT_SHIFT; - - mctrl &= ~MCTRL0_REFR_COUNT_MASK; - mctrl |= refr_count << MCTRL0_REFR_COUNT_SHIFT; - write_hbreg(HBIRD_MEM_CNTL0_ADDR, mctrl); - mctrl = read_hbreg(HBIRD_MEM_CNTL0_ADDR); - - if (cpu_slowing_down && !(mctrl & MCTRL0_SREFRESH_ENAB)) { - unsigned long usecs; - - /* We have to wait for both refresh counts (old - * and new) to go to zero. - */ - usecs = (MCTRL0_REFR_CLKS_P_CNT * - (refr_count + old_refr_count) * - 1000000UL * - old_divisor) / clock_tick; - udelay(usecs + 1UL); - } -} - -static void us2e_transition(unsigned long estar, unsigned long new_bits, - unsigned long clock_tick, - unsigned long old_divisor, unsigned long divisor) -{ - unsigned long flags; - - local_irq_save(flags); - - estar &= ~ESTAR_MODE_DIV_MASK; - - /* This is based upon the state transition diagram in the IIe manual. */ - if (old_divisor == 2 && divisor == 1) { - self_refresh_ctl(0); - write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); - frob_mem_refresh(0, clock_tick, old_divisor, divisor); - } else if (old_divisor == 1 && divisor == 2) { - frob_mem_refresh(1, clock_tick, old_divisor, divisor); - write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); - self_refresh_ctl(1); - } else if (old_divisor == 1 && divisor > 2) { - us2e_transition(estar, ESTAR_MODE_DIV_2, clock_tick, - 1, 2); - us2e_transition(estar, new_bits, clock_tick, - 2, divisor); - } else if (old_divisor > 2 && divisor == 1) { - us2e_transition(estar, ESTAR_MODE_DIV_2, clock_tick, - old_divisor, 2); - us2e_transition(estar, new_bits, clock_tick, - 2, divisor); - } else if (old_divisor < divisor) { - frob_mem_refresh(0, clock_tick, old_divisor, divisor); - write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); - } else if (old_divisor > divisor) { - write_hbreg(HBIRD_ESTAR_MODE_ADDR, estar | new_bits); - frob_mem_refresh(1, clock_tick, old_divisor, divisor); - } else { - BUG(); - } - - local_irq_restore(flags); -} - -static unsigned long index_to_estar_mode(unsigned int index) -{ - switch (index) { - case 0: - return ESTAR_MODE_DIV_1; - - case 1: - return ESTAR_MODE_DIV_2; - - case 2: - return ESTAR_MODE_DIV_4; - - case 3: - return ESTAR_MODE_DIV_6; - - case 4: - return ESTAR_MODE_DIV_8; - - default: - BUG(); - } -} - -static unsigned long index_to_divisor(unsigned int index) -{ - switch (index) { - case 0: - return 1; - - case 1: - return 2; - - case 2: - return 4; - - case 3: - return 6; - - case 4: - return 8; - - default: - BUG(); - } -} - -static unsigned long estar_to_divisor(unsigned long estar) -{ - unsigned long ret; - - switch (estar & ESTAR_MODE_DIV_MASK) { - case ESTAR_MODE_DIV_1: - ret = 1; - break; - case ESTAR_MODE_DIV_2: - ret = 2; - break; - case ESTAR_MODE_DIV_4: - ret = 4; - break; - case ESTAR_MODE_DIV_6: - ret = 6; - break; - case ESTAR_MODE_DIV_8: - ret = 8; - break; - default: - BUG(); - } - - return ret; -} - -static unsigned int us2e_freq_get(unsigned int cpu) -{ - cpumask_t cpus_allowed; - unsigned long clock_tick, estar; - - if (!cpu_online(cpu)) - return 0; - - cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current)); - set_cpus_allowed_ptr(current, cpumask_of(cpu)); - - clock_tick = sparc64_get_clock_tick(cpu) / 1000; - estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR); - - set_cpus_allowed_ptr(current, &cpus_allowed); - - return clock_tick / estar_to_divisor(estar); -} - -static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index) -{ - unsigned long new_bits, new_freq; - unsigned long clock_tick, divisor, old_divisor, estar; - cpumask_t cpus_allowed; - struct cpufreq_freqs freqs; - - if (!cpu_online(cpu)) - return; - - cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current)); - set_cpus_allowed_ptr(current, cpumask_of(cpu)); - - new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000; - new_bits = index_to_estar_mode(index); - divisor = index_to_divisor(index); - new_freq /= divisor; - - estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR); - - old_divisor = estar_to_divisor(estar); - - freqs.old = clock_tick / old_divisor; - freqs.new = new_freq; - freqs.cpu = cpu; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - if (old_divisor != divisor) - us2e_transition(estar, new_bits, clock_tick * 1000, - old_divisor, divisor); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - set_cpus_allowed_ptr(current, &cpus_allowed); -} - -static int us2e_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int new_index = 0; - - if (cpufreq_frequency_table_target(policy, - &us2e_freq_table[policy->cpu].table[0], - target_freq, relation, &new_index)) - return -EINVAL; - - us2e_set_cpu_divider_index(policy->cpu, new_index); - - return 0; -} - -static int us2e_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - &us2e_freq_table[policy->cpu].table[0]); -} - -static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000; - struct cpufreq_frequency_table *table = - &us2e_freq_table[cpu].table[0]; - - table[0].index = 0; - table[0].frequency = clock_tick / 1; - table[1].index = 1; - table[1].frequency = clock_tick / 2; - table[2].index = 2; - table[2].frequency = clock_tick / 4; - table[2].index = 3; - table[2].frequency = clock_tick / 6; - table[2].index = 4; - table[2].frequency = clock_tick / 8; - table[2].index = 5; - table[3].frequency = CPUFREQ_TABLE_END; - - policy->cpuinfo.transition_latency = 0; - policy->cur = clock_tick; - - return cpufreq_frequency_table_cpuinfo(policy, table); -} - -static int us2e_freq_cpu_exit(struct cpufreq_policy *policy) -{ - if (cpufreq_us2e_driver) - us2e_set_cpu_divider_index(policy->cpu, 0); - - return 0; -} - -static int __init us2e_freq_init(void) -{ - unsigned long manuf, impl, ver; - int ret; - - if (tlb_type != spitfire) - return -ENODEV; - - __asm__("rdpr %%ver, %0" : "=r" (ver)); - manuf = ((ver >> 48) & 0xffff); - impl = ((ver >> 32) & 0xffff); - - if (manuf == 0x17 && impl == 0x13) { - struct cpufreq_driver *driver; - - ret = -ENOMEM; - driver = kzalloc(sizeof(struct cpufreq_driver), GFP_KERNEL); - if (!driver) - goto err_out; - - us2e_freq_table = kzalloc( - (NR_CPUS * sizeof(struct us2e_freq_percpu_info)), - GFP_KERNEL); - if (!us2e_freq_table) - goto err_out; - - driver->init = us2e_freq_cpu_init; - driver->verify = us2e_freq_verify; - driver->target = us2e_freq_target; - driver->get = us2e_freq_get; - driver->exit = us2e_freq_cpu_exit; - driver->owner = THIS_MODULE, - strcpy(driver->name, "UltraSPARC-IIe"); - - cpufreq_us2e_driver = driver; - ret = cpufreq_register_driver(driver); - if (ret) - goto err_out; - - return 0; - -err_out: - if (driver) { - kfree(driver); - cpufreq_us2e_driver = NULL; - } - kfree(us2e_freq_table); - us2e_freq_table = NULL; - return ret; - } - - return -ENODEV; -} - -static void __exit us2e_freq_exit(void) -{ - if (cpufreq_us2e_driver) { - cpufreq_unregister_driver(cpufreq_us2e_driver); - kfree(cpufreq_us2e_driver); - cpufreq_us2e_driver = NULL; - kfree(us2e_freq_table); - us2e_freq_table = NULL; - } -} - -MODULE_AUTHOR("David S. Miller <davem@redhat.com>"); -MODULE_DESCRIPTION("cpufreq driver for UltraSPARC-IIe"); -MODULE_LICENSE("GPL"); - -module_init(us2e_freq_init); -module_exit(us2e_freq_exit); diff --git a/arch/sparc/kernel/us3_cpufreq.c b/arch/sparc/kernel/us3_cpufreq.c deleted file mode 100644 index eb1624b..0000000 --- a/arch/sparc/kernel/us3_cpufreq.c +++ /dev/null @@ -1,274 +0,0 @@ -/* us3_cpufreq.c: UltraSPARC-III cpu frequency support - * - * Copyright (C) 2003 David S. Miller (davem@redhat.com) - * - * Many thanks to Dominik Brodowski for fixing up the cpufreq - * infrastructure in order to make this driver easier to implement. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/cpufreq.h> -#include <linux/threads.h> -#include <linux/slab.h> -#include <linux/init.h> - -#include <asm/head.h> -#include <asm/timer.h> - -static struct cpufreq_driver *cpufreq_us3_driver; - -struct us3_freq_percpu_info { - struct cpufreq_frequency_table table[4]; -}; - -/* Indexed by cpu number. */ -static struct us3_freq_percpu_info *us3_freq_table; - -/* UltraSPARC-III has three dividers: 1, 2, and 32. These are controlled - * in the Safari config register. - */ -#define SAFARI_CFG_DIV_1 0x0000000000000000UL -#define SAFARI_CFG_DIV_2 0x0000000040000000UL -#define SAFARI_CFG_DIV_32 0x0000000080000000UL -#define SAFARI_CFG_DIV_MASK 0x00000000C0000000UL - -static unsigned long read_safari_cfg(void) -{ - unsigned long ret; - - __asm__ __volatile__("ldxa [%%g0] %1, %0" - : "=&r" (ret) - : "i" (ASI_SAFARI_CONFIG)); - return ret; -} - -static void write_safari_cfg(unsigned long val) -{ - __asm__ __volatile__("stxa %0, [%%g0] %1\n\t" - "membar #Sync" - : /* no outputs */ - : "r" (val), "i" (ASI_SAFARI_CONFIG) - : "memory"); -} - -static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg) -{ - unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000; - unsigned long ret; - - switch (safari_cfg & SAFARI_CFG_DIV_MASK) { - case SAFARI_CFG_DIV_1: - ret = clock_tick / 1; - break; - case SAFARI_CFG_DIV_2: - ret = clock_tick / 2; - break; - case SAFARI_CFG_DIV_32: - ret = clock_tick / 32; - break; - default: - BUG(); - } - - return ret; -} - -static unsigned int us3_freq_get(unsigned int cpu) -{ - cpumask_t cpus_allowed; - unsigned long reg; - unsigned int ret; - - if (!cpu_online(cpu)) - return 0; - - cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current)); - set_cpus_allowed_ptr(current, cpumask_of(cpu)); - - reg = read_safari_cfg(); - ret = get_current_freq(cpu, reg); - - set_cpus_allowed_ptr(current, &cpus_allowed); - - return ret; -} - -static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index) -{ - unsigned long new_bits, new_freq, reg; - cpumask_t cpus_allowed; - struct cpufreq_freqs freqs; - - if (!cpu_online(cpu)) - return; - - cpumask_copy(&cpus_allowed, tsk_cpus_allowed(current)); - set_cpus_allowed_ptr(current, cpumask_of(cpu)); - - new_freq = sparc64_get_clock_tick(cpu) / 1000; - switch (index) { - case 0: - new_bits = SAFARI_CFG_DIV_1; - new_freq /= 1; - break; - case 1: - new_bits = SAFARI_CFG_DIV_2; - new_freq /= 2; - break; - case 2: - new_bits = SAFARI_CFG_DIV_32; - new_freq /= 32; - break; - - default: - BUG(); - } - - reg = read_safari_cfg(); - - freqs.old = get_current_freq(cpu, reg); - freqs.new = new_freq; - freqs.cpu = cpu; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - reg &= ~SAFARI_CFG_DIV_MASK; - reg |= new_bits; - write_safari_cfg(reg); - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - set_cpus_allowed_ptr(current, &cpus_allowed); -} - -static int us3_freq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int new_index = 0; - - if (cpufreq_frequency_table_target(policy, - &us3_freq_table[policy->cpu].table[0], - target_freq, - relation, - &new_index)) - return -EINVAL; - - us3_set_cpu_divider_index(policy->cpu, new_index); - - return 0; -} - -static int us3_freq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, - &us3_freq_table[policy->cpu].table[0]); -} - -static int __init us3_freq_cpu_init(struct cpufreq_policy *policy) -{ - unsigned int cpu = policy->cpu; - unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000; - struct cpufreq_frequency_table *table = - &us3_freq_table[cpu].table[0]; - - table[0].index = 0; - table[0].frequency = clock_tick / 1; - table[1].index = 1; - table[1].frequency = clock_tick / 2; - table[2].index = 2; - table[2].frequency = clock_tick / 32; - table[3].index = 0; - table[3].frequency = CPUFREQ_TABLE_END; - - policy->cpuinfo.transition_latency = 0; - policy->cur = clock_tick; - - return cpufreq_frequency_table_cpuinfo(policy, table); -} - -static int us3_freq_cpu_exit(struct cpufreq_policy *policy) -{ - if (cpufreq_us3_driver) - us3_set_cpu_divider_index(policy->cpu, 0); - - return 0; -} - -static int __init us3_freq_init(void) -{ - unsigned long manuf, impl, ver; - int ret; - - if (tlb_type != cheetah && tlb_type != cheetah_plus) - return -ENODEV; - - __asm__("rdpr %%ver, %0" : "=r" (ver)); - manuf = ((ver >> 48) & 0xffff); - impl = ((ver >> 32) & 0xffff); - - if (manuf == CHEETAH_MANUF && - (impl == CHEETAH_IMPL || - impl == CHEETAH_PLUS_IMPL || - impl == JAGUAR_IMPL || - impl == PANTHER_IMPL)) { - struct cpufreq_driver *driver; - - ret = -ENOMEM; - driver = kzalloc(sizeof(struct cpufreq_driver), GFP_KERNEL); - if (!driver) - goto err_out; - - us3_freq_table = kzalloc( - (NR_CPUS * sizeof(struct us3_freq_percpu_info)), - GFP_KERNEL); - if (!us3_freq_table) - goto err_out; - - driver->init = us3_freq_cpu_init; - driver->verify = us3_freq_verify; - driver->target = us3_freq_target; - driver->get = us3_freq_get; - driver->exit = us3_freq_cpu_exit; - driver->owner = THIS_MODULE, - strcpy(driver->name, "UltraSPARC-III"); - - cpufreq_us3_driver = driver; - ret = cpufreq_register_driver(driver); - if (ret) - goto err_out; - - return 0; - -err_out: - if (driver) { - kfree(driver); - cpufreq_us3_driver = NULL; - } - kfree(us3_freq_table); - us3_freq_table = NULL; - return ret; - } - - return -ENODEV; -} - -static void __exit us3_freq_exit(void) -{ - if (cpufreq_us3_driver) { - cpufreq_unregister_driver(cpufreq_us3_driver); - kfree(cpufreq_us3_driver); - cpufreq_us3_driver = NULL; - kfree(us3_freq_table); - us3_freq_table = NULL; - } -} - -MODULE_AUTHOR("David S. Miller <davem@redhat.com>"); -MODULE_DESCRIPTION("cpufreq driver for UltraSPARC-III"); -MODULE_LICENSE("GPL"); - -module_init(us3_freq_init); -module_exit(us3_freq_exit); diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile index fa497e0..607a72f 100644 --- a/arch/unicore32/kernel/Makefile +++ b/arch/unicore32/kernel/Makefile @@ -9,7 +9,6 @@ obj-y += setup.o signal.o sys.o stacktrace.o traps.o obj-$(CONFIG_MODULES) += ksyms.o module.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_CPU_FREQ) += cpu-ucv2.o obj-$(CONFIG_UNICORE_FPU_F64) += fpu-ucf64.o # obj-y for architecture PKUnity v3 diff --git a/arch/unicore32/kernel/cpu-ucv2.c b/arch/unicore32/kernel/cpu-ucv2.c deleted file mode 100644 index 4a99f62..0000000 --- a/arch/unicore32/kernel/cpu-ucv2.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * linux/arch/unicore32/kernel/cpu-ucv2.c: clock scaling for the UniCore-II - * - * Code specific to PKUnity SoC and UniCore ISA - * - * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> - * Copyright (C) 2001-2010 Guan Xuetao - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/cpufreq.h> - -#include <mach/hardware.h> - -static struct cpufreq_driver ucv2_driver; - -/* make sure that only the "userspace" governor is run - * -- anything else wouldn't make sense on this platform, anyway. - */ -int ucv2_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu) - return -EINVAL; - - cpufreq_verify_within_limits(policy, - policy->cpuinfo.min_freq, policy->cpuinfo.max_freq); - - return 0; -} - -static unsigned int ucv2_getspeed(unsigned int cpu) -{ - struct clk *mclk = clk_get(NULL, "MAIN_CLK"); - - if (cpu) - return 0; - return clk_get_rate(mclk)/1000; -} - -static int ucv2_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int cur = ucv2_getspeed(0); - struct cpufreq_freqs freqs; - struct clk *mclk = clk_get(NULL, "MAIN_CLK"); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - if (!clk_set_rate(mclk, target_freq * 1000)) { - freqs.old = cur; - freqs.new = target_freq; - freqs.cpu = 0; - } - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -static int __init ucv2_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - policy->cur = ucv2_getspeed(0); - policy->min = policy->cpuinfo.min_freq = 250000; - policy->max = policy->cpuinfo.max_freq = 1000000; - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - return 0; -} - -static struct cpufreq_driver ucv2_driver = { - .flags = CPUFREQ_STICKY, - .verify = ucv2_verify_speed, - .target = ucv2_target, - .get = ucv2_getspeed, - .init = ucv2_cpu_init, - .name = "UniCore-II", -}; - -static int __init ucv2_cpufreq_init(void) -{ - return cpufreq_register_driver(&ucv2_driver); -} - -arch_initcall(ucv2_cpufreq_init); diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 93fe929..9e22520 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -182,6 +182,7 @@ #define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */ #define X86_FEATURE_DTHERM (7*32+ 7) /* Digital Thermal Sensor */ #define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */ +#define X86_FEATURE_PROC_FEEDBACK (7*32+ 9) /* AMD ProcFeedbackInterface */ /* Virtualization flags: Linux defined, word 8 */ #define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */ diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c index ee8e9ab..d92b5da 100644 --- a/arch/x86/kernel/cpu/scattered.c +++ b/arch/x86/kernel/cpu/scattered.c @@ -39,8 +39,9 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) { X86_FEATURE_APERFMPERF, CR_ECX, 0, 0x00000006, 0 }, { X86_FEATURE_EPB, CR_ECX, 3, 0x00000006, 0 }, { X86_FEATURE_XSAVEOPT, CR_EAX, 0, 0x0000000d, 1 }, - { X86_FEATURE_CPB, CR_EDX, 9, 0x80000007, 0 }, { X86_FEATURE_HW_PSTATE, CR_EDX, 7, 0x80000007, 0 }, + { X86_FEATURE_CPB, CR_EDX, 9, 0x80000007, 0 }, + { X86_FEATURE_PROC_FEEDBACK, CR_EDX,11, 0x80000007, 0 }, { X86_FEATURE_NPT, CR_EDX, 0, 0x8000000a, 0 }, { X86_FEATURE_LBRV, CR_EDX, 1, 0x8000000a, 0 }, { X86_FEATURE_SVML, CR_EDX, 2, 0x8000000a, 0 }, |