Merge 3.8-rc5 into driver-core-next

This resolves a gpio driver merge issue pointed out in linux-next.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4 files changed, 24 insertions, 14 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 7862d17..4979127 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -53,6 +53,7 @@
 
 enum {
 	AHCI_PCI_BAR_STA2X11	= 0,
+	AHCI_PCI_BAR_ENMOTUS	= 2,
 	AHCI_PCI_BAR_STANDARD	= 5,
 };
 
@@ -410,6 +411,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci },	/* ASM1061 */
 	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1062 */
 
+	/* Enmotus */
+	{ PCI_DEVICE(0x1c44, 0x8000), board_ahci },
+
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
@@ -1098,9 +1102,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_info(&pdev->dev,
 			 "PDC42819 can only drive SATA devices with this driver\n");
 
-	/* The Connext uses non-standard BAR */
+	/* Both Connext and Enmotus devices use non-standard BARs */
 	if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06)
 		ahci_pci_bar = AHCI_PCI_BAR_STA2X11;
+	else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000)
+		ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS;
 
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 320712a..6cd7805 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1951,13 +1951,13 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
 	/* Use the nominal value 10 ms if the read MDAT is zero,
 	 * the nominal value of DETO is 20 ms.
 	 */
-	if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] &
+	if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] &
 	    ATA_LOG_DEVSLP_VALID_MASK) {
-		mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] &
+		mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] &
 		       ATA_LOG_DEVSLP_MDAT_MASK;
 		if (!mdat)
 			mdat = 10;
-		deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO];
+		deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO];
 		if (!deto)
 			deto = 20;
 	} else {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9e8b99a..46cd3f4 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2325,24 +2325,28 @@ int ata_dev_configure(struct ata_device *dev)
 			}
 		}
 
-		/* check and mark DevSlp capability */
-		if (ata_id_has_devslp(dev->id))
-			dev->flags |= ATA_DFLAG_DEVSLP;
-
-		/* Obtain SATA Settings page from Identify Device Data Log,
-		 * which contains DevSlp timing variables etc.
-		 * Exclude old devices with ata_id_has_ncq()
+		/* Check and mark DevSlp capability. Get DevSlp timing variables
+		 * from SATA Settings page of Identify Device Data Log.
 		 */
-		if (ata_id_has_ncq(dev->id)) {
+		if (ata_id_has_devslp(dev->id)) {
+			u8 sata_setting[ATA_SECT_SIZE];
+			int i, j;
+
+			dev->flags |= ATA_DFLAG_DEVSLP;
 			err_mask = ata_read_log_page(dev,
 						     ATA_LOG_SATA_ID_DEV_DATA,
 						     ATA_LOG_SATA_SETTINGS,
-						     dev->sata_settings,
+						     sata_setting,
 						     1);
 			if (err_mask)
 				ata_dev_dbg(dev,
 					    "failed to get Identify Device Data, Emask 0x%x\n",
 					    err_mask);
+			else
+				for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) {
+					j = ATA_LOG_DEVSLP_OFFSET + i;
+					dev->devslp_timing[i] = sata_setting[j];
+				}
 		}
 
 		dev->cdb_len = 16;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index bf039b0..bcf4437 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2094,7 +2094,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
  */
 static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc)
 {
-	if (qc->flags & AC_ERR_MEDIA)
+	if (qc->err_mask & AC_ERR_MEDIA)
 		return 0;	/* don't retry media errors */
 	if (qc->flags & ATA_QCFLAG_IO)
 		return 1;	/* otherwise retry anything from fs stack */