diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2012-06-19 23:44:25 +0200 |
---|---|---|
committer | Mike Turquette <mturquette@linaro.org> | 2012-07-11 15:36:45 -0700 |
commit | 50667d63085af108f625c83102430c1d74931d78 (patch) | |
tree | 62285dcaf8733ef5e9257db9ec6029ca7745c26c /drivers/clk/clk-u300.c | |
parent | 9ca1c5a4bf4105d6f2f2a46892495953dd3e2fec (diff) | |
download | kernel_goldelico_gta04-50667d63085af108f625c83102430c1d74931d78.zip kernel_goldelico_gta04-50667d63085af108f625c83102430c1d74931d78.tar.gz kernel_goldelico_gta04-50667d63085af108f625c83102430c1d74931d78.tar.bz2 |
ARM: u300: convert to common clock
This converts the U300 clock implementation over to use the common
struct clk and moves the implementation down into drivers/clk.
Since VCO isn't used in tree it was removed, it's not hard to
put it back in if need be.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[mturquette@linaro.org: trivial Makefile conflict]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Diffstat (limited to 'drivers/clk/clk-u300.c')
-rw-r--r-- | drivers/clk/clk-u300.c | 746 |
1 files changed, 746 insertions, 0 deletions
diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c new file mode 100644 index 0000000..a15f792 --- /dev/null +++ b/drivers/clk/clk-u300.c @@ -0,0 +1,746 @@ +/* + * U300 clock implementation + * Copyright (C) 2007-2012 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * Author: Linus Walleij <linus.walleij@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + */ +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk-provider.h> +#include <linux/spinlock.h> +#include <mach/syscon.h> + +/* + * The clocking hierarchy currently looks like this. + * NOTE: the idea is NOT to show how the clocks are routed on the chip! + * The ideas is to show dependencies, so a clock higher up in the + * hierarchy has to be on in order for another clock to be on. Now, + * both CPU and DMA can actually be on top of the hierarchy, and that + * is not modeled currently. Instead we have the backbone AMBA bus on + * top. This bus cannot be programmed in any way but conceptually it + * needs to be active for the bridges and devices to transport data. + * + * Please be aware that a few clocks are hw controlled, which mean that + * the hw itself can turn on/off or change the rate of the clock when + * needed! + * + * AMBA bus + * | + * +- CPU + * +- FSMC NANDIF NAND Flash interface + * +- SEMI Shared Memory interface + * +- ISP Image Signal Processor (U335 only) + * +- CDS (U335 only) + * +- DMA Direct Memory Access Controller + * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL) + * +- APEX + * +- VIDEO_ENC AVE2/3 Video Encoder + * +- XGAM Graphics Accelerator Controller + * +- AHB + * | + * +- ahb:0 AHB Bridge + * | | + * | +- ahb:1 INTCON Interrupt controller + * | +- ahb:3 MSPRO Memory Stick Pro controller + * | +- ahb:4 EMIF External Memory interface + * | + * +- fast:0 FAST bridge + * | | + * | +- fast:1 MMCSD MMC/SD card reader controller + * | +- fast:2 I2S0 PCM I2S channel 0 controller + * | +- fast:3 I2S1 PCM I2S channel 1 controller + * | +- fast:4 I2C0 I2C channel 0 controller + * | +- fast:5 I2C1 I2C channel 1 controller + * | +- fast:6 SPI SPI controller + * | +- fast:7 UART1 Secondary UART (U335 only) + * | + * +- slow:0 SLOW bridge + * | + * +- slow:1 SYSCON (not possible to control) + * +- slow:2 WDOG Watchdog + * +- slow:3 UART0 primary UART + * +- slow:4 TIMER_APP Application timer - used in Linux + * +- slow:5 KEYPAD controller + * +- slow:6 GPIO controller + * +- slow:7 RTC controller + * +- slow:8 BT Bus Tracer (not used currently) + * +- slow:9 EH Event Handler (not used currently) + * +- slow:a TIMER_ACC Access style timer (not used currently) + * +- slow:b PPM (U335 only, what is that?) + */ + +/* Global syscon virtual base */ +static void __iomem *syscon_vbase; + +/** + * struct clk_syscon - U300 syscon clock + * @hw: corresponding clock hardware entry + * @hw_ctrld: whether this clock is hardware controlled (for refcount etc) + * and does not need any magic pokes to be enabled/disabled + * @reset: state holder, whether this block's reset line is asserted or not + * @res_reg: reset line enable/disable flag register + * @res_bit: bit for resetting or taking this consumer out of reset + * @en_reg: clock line enable/disable flag register + * @en_bit: bit for enabling/disabling this consumer clock line + * @clk_val: magic value to poke in the register to enable/disable + * this one clock + */ +struct clk_syscon { + struct clk_hw hw; + bool hw_ctrld; + bool reset; + void __iomem *res_reg; + u8 res_bit; + void __iomem *en_reg; + u8 en_bit; + u16 clk_val; +}; + +#define to_syscon(_hw) container_of(_hw, struct clk_syscon, hw) + +static DEFINE_SPINLOCK(syscon_resetreg_lock); + +/* + * Reset control functions. We remember if a block has been + * taken out of reset and don't remove the reset assertion again + * and vice versa. Currently we only remove resets so the + * enablement function is defined out. + */ +static void syscon_block_reset_enable(struct clk_syscon *sclk) +{ + unsigned long iflags; + u16 val; + + /* Not all blocks support resetting */ + if (!sclk->res_reg) + return; + spin_lock_irqsave(&syscon_resetreg_lock, iflags); + val = readw(sclk->res_reg); + val |= BIT(sclk->res_bit); + writew(val, sclk->res_reg); + spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); + sclk->reset = true; +} + +static void syscon_block_reset_disable(struct clk_syscon *sclk) +{ + unsigned long iflags; + u16 val; + + /* Not all blocks support resetting */ + if (!sclk->res_reg) + return; + spin_lock_irqsave(&syscon_resetreg_lock, iflags); + val = readw(sclk->res_reg); + val &= ~BIT(sclk->res_bit); + writew(val, sclk->res_reg); + spin_unlock_irqrestore(&syscon_resetreg_lock, iflags); + sclk->reset = false; +} + +static int syscon_clk_prepare(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* If the block is in reset, bring it out */ + if (sclk->reset) + syscon_block_reset_disable(sclk); + return 0; +} + +static void syscon_clk_unprepare(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* Please don't force the console into reset */ + if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN) + return; + /* When unpreparing, force block into reset */ + if (!sclk->reset) + syscon_block_reset_enable(sclk); +} + +static int syscon_clk_enable(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* Don't touch the hardware controlled clocks */ + if (sclk->hw_ctrld) + return 0; + /* These cannot be controlled */ + if (sclk->clk_val == 0xFFFFU) + return 0; + + writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCER); + return 0; +} + +static void syscon_clk_disable(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + + /* Don't touch the hardware controlled clocks */ + if (sclk->hw_ctrld) + return; + if (sclk->clk_val == 0xFFFFU) + return; + /* Please don't disable the console port */ + if (sclk->clk_val == U300_SYSCON_SBCER_UART_CLK_EN) + return; + + writew(sclk->clk_val, syscon_vbase + U300_SYSCON_SBCDR); +} + +static int syscon_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_syscon *sclk = to_syscon(hw); + u16 val; + + /* If no enable register defined, it's always-on */ + if (!sclk->en_reg) + return 1; + + val = readw(sclk->en_reg); + val &= BIT(sclk->en_bit); + + return val ? 1 : 0; +} + +static u16 syscon_get_perf(void) +{ + u16 val; + + val = readw(syscon_vbase + U300_SYSCON_CCR); + val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + return val; +} + +static unsigned long +syscon_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_syscon *sclk = to_syscon(hw); + u16 perf = syscon_get_perf(); + + switch(sclk->clk_val) { + case U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN: + case U300_SYSCON_SBCER_I2C0_CLK_EN: + case U300_SYSCON_SBCER_I2C1_CLK_EN: + case U300_SYSCON_SBCER_MMC_CLK_EN: + case U300_SYSCON_SBCER_SPI_CLK_EN: + /* The FAST clocks have one progression */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + default: + return parent_rate; /* 26 MHz */ + } + case U300_SYSCON_SBCER_DMAC_CLK_EN: + case U300_SYSCON_SBCER_NANDIF_CLK_EN: + case U300_SYSCON_SBCER_XGAM_CLK_EN: + /* AMBA interconnect peripherals */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 6500000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 26000000; + default: + return parent_rate; /* 52 MHz */ + } + case U300_SYSCON_SBCER_SEMI_CLK_EN: + case U300_SYSCON_SBCER_EMIF_CLK_EN: + /* EMIF speeds */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 52000000; + default: + return 104000000; + } + case U300_SYSCON_SBCER_CPU_CLK_EN: + /* And the fast CPU clock */ + switch(perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + return 52000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + return 104000000; + default: + return parent_rate; /* 208 MHz */ + } + default: + /* + * The SLOW clocks and default just inherit the rate of + * their parent (typically PLL13 13 MHz). + */ + return parent_rate; + } +} + +static long +syscon_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_syscon *sclk = to_syscon(hw); + + if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN) + return *prate; + /* We really only support setting the rate of the CPU clock */ + if (rate <= 13000000) + return 13000000; + if (rate <= 52000000) + return 52000000; + if (rate <= 104000000) + return 104000000; + return 208000000; +} + +static int syscon_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_syscon *sclk = to_syscon(hw); + u16 val; + + /* We only support setting the rate of the CPU clock */ + if (sclk->clk_val != U300_SYSCON_SBCER_CPU_CLK_EN) + return -EINVAL; + switch (rate) { + case 13000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER; + break; + case 52000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE; + break; + case 104000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH; + break; + case 208000000: + val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST; + break; + default: + return -EINVAL; + } + val |= readw(syscon_vbase + U300_SYSCON_CCR) & + ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ; + writew(val, syscon_vbase + U300_SYSCON_CCR); + return 0; +} + +static const struct clk_ops syscon_clk_ops = { + .prepare = syscon_clk_prepare, + .unprepare = syscon_clk_unprepare, + .enable = syscon_clk_enable, + .disable = syscon_clk_disable, + .is_enabled = syscon_clk_is_enabled, + .recalc_rate = syscon_clk_recalc_rate, + .round_rate = syscon_clk_round_rate, + .set_rate = syscon_clk_set_rate, +}; + +static struct clk * __init +syscon_clk_register(struct device *dev, const char *name, + const char *parent_name, unsigned long flags, + bool hw_ctrld, + void __iomem *res_reg, u8 res_bit, + void __iomem *en_reg, u8 en_bit, + u16 clk_val) +{ + struct clk *clk; + struct clk_syscon *sclk; + struct clk_init_data init; + + sclk = kzalloc(sizeof(struct clk_syscon), GFP_KERNEL); + if (!sclk) { + pr_err("could not allocate syscon clock %s\n", + name); + return ERR_PTR(-ENOMEM); + } + init.name = name; + init.ops = &syscon_clk_ops; + init.flags = flags; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + sclk->hw.init = &init; + sclk->hw_ctrld = hw_ctrld; + /* Assume the block is in reset at registration */ + sclk->reset = true; + sclk->res_reg = res_reg; + sclk->res_bit = res_bit; + sclk->en_reg = en_reg; + sclk->en_bit = en_bit; + sclk->clk_val = clk_val; + + clk = clk_register(dev, &sclk->hw); + if (IS_ERR(clk)) + kfree(sclk); + + return clk; +} + +/** + * struct clk_mclk - U300 MCLK clock (MMC/SD clock) + * @hw: corresponding clock hardware entry + * @is_mspro: if this is the memory stick clock rather than MMC/SD + */ +struct clk_mclk { + struct clk_hw hw; + bool is_mspro; +}; + +#define to_mclk(_hw) container_of(_hw, struct clk_mclk, hw) + +static int mclk_clk_prepare(struct clk_hw *hw) +{ + struct clk_mclk *mclk = to_mclk(hw); + u16 val; + + /* The MMC and MSPRO clocks need some special set-up */ + if (!mclk->is_mspro) { + /* Set default MMC clock divisor to 18.9 MHz */ + writew(0x0054U, syscon_vbase + U300_SYSCON_MMF0R); + val = readw(syscon_vbase + U300_SYSCON_MMCR); + /* Disable the MMC feedback clock */ + val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; + /* Disable MSPRO frequency */ + val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; + writew(val, syscon_vbase + U300_SYSCON_MMCR); + } else { + val = readw(syscon_vbase + U300_SYSCON_MMCR); + /* Disable the MMC feedback clock */ + val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE; + /* Enable MSPRO frequency */ + val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE; + writew(val, syscon_vbase + U300_SYSCON_MMCR); + } + + return 0; +} + +static unsigned long +mclk_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + u16 perf = syscon_get_perf(); + + switch (perf) { + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER: + /* + * Here, the 208 MHz PLL gets shut down and the always + * on 13 MHz PLL used for RTC etc kicks into use + * instead. + */ + return 13000000; + case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH: + case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST: + { + /* + * This clock is under program control. The register is + * divided in two nybbles, bit 7-4 gives cycles-1 to count + * high, bit 3-0 gives cycles-1 to count low. Distribute + * these with no more than 1 cycle difference between + * low and high and add low and high to get the actual + * divisor. The base PLL is 208 MHz. Writing 0x00 will + * divide by 1 and 1 so the highest frequency possible + * is 104 MHz. + * + * e.g. 0x54 => + * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz + */ + u16 val = readw(syscon_vbase + U300_SYSCON_MMF0R) & + U300_SYSCON_MMF0R_MASK; + switch (val) { + case 0x0054: + return 18900000; + case 0x0044: + return 20800000; + case 0x0043: + return 23100000; + case 0x0033: + return 26000000; + case 0x0032: + return 29700000; + case 0x0022: + return 34700000; + case 0x0021: + return 41600000; + case 0x0011: + return 52000000; + case 0x0000: + return 104000000; + default: + break; + } + } + default: + break; + } + return parent_rate; +} + +static long +mclk_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + if (rate <= 18900000) + return 18900000; + if (rate <= 20800000) + return 20800000; + if (rate <= 23100000) + return 23100000; + if (rate <= 26000000) + return 26000000; + if (rate <= 29700000) + return 29700000; + if (rate <= 34700000) + return 34700000; + if (rate <= 41600000) + return 41600000; + /* Highest rate */ + return 52000000; +} + +static int mclk_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + u16 val; + u16 reg; + + switch (rate) { + case 18900000: + val = 0x0054; + break; + case 20800000: + val = 0x0044; + break; + case 23100000: + val = 0x0043; + break; + case 26000000: + val = 0x0033; + break; + case 29700000: + val = 0x0032; + break; + case 34700000: + val = 0x0022; + break; + case 41600000: + val = 0x0021; + break; + case 52000000: + val = 0x0011; + break; + case 104000000: + val = 0x0000; + break; + default: + return -EINVAL; + } + + reg = readw(syscon_vbase + U300_SYSCON_MMF0R) & + ~U300_SYSCON_MMF0R_MASK; + writew(reg | val, syscon_vbase + U300_SYSCON_MMF0R); + return 0; +} + +static const struct clk_ops mclk_ops = { + .prepare = mclk_clk_prepare, + .recalc_rate = mclk_clk_recalc_rate, + .round_rate = mclk_clk_round_rate, + .set_rate = mclk_clk_set_rate, +}; + +static struct clk * __init +mclk_clk_register(struct device *dev, const char *name, + const char *parent_name, bool is_mspro) +{ + struct clk *clk; + struct clk_mclk *mclk; + struct clk_init_data init; + + mclk = kzalloc(sizeof(struct clk_mclk), GFP_KERNEL); + if (!mclk) { + pr_err("could not allocate MMC/SD clock %s\n", + name); + return ERR_PTR(-ENOMEM); + } + init.name = "mclk"; + init.ops = &mclk_ops; + init.flags = 0; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + mclk->hw.init = &init; + mclk->is_mspro = is_mspro; + + clk = clk_register(dev, &mclk->hw); + if (IS_ERR(clk)) + kfree(mclk); + + return clk; +} + +void __init u300_clk_init(void __iomem *base) +{ + u16 val; + struct clk *clk; + + syscon_vbase = base; + + /* Set system to run at PLL208, max performance, a known state. */ + val = readw(syscon_vbase + U300_SYSCON_CCR); + val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK; + writew(val, syscon_vbase + U300_SYSCON_CCR); + /* Wait for the PLL208 to lock if not locked in yet */ + while (!(readw(syscon_vbase + U300_SYSCON_CSR) & + U300_SYSCON_CSR_PLL208_LOCK_IND)); + + /* Power management enable */ + val = readw(syscon_vbase + U300_SYSCON_PMCR); + val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; + writew(val, syscon_vbase + U300_SYSCON_PMCR); + + /* These are always available (RTC and PLL13) */ + clk = clk_register_fixed_rate(NULL, "app_32_clk", NULL, + CLK_IS_ROOT, 32768); + /* The watchdog sits directly on the 32 kHz clock */ + clk_register_clkdev(clk, NULL, "coh901327_wdog"); + clk = clk_register_fixed_rate(NULL, "pll13", NULL, + CLK_IS_ROOT, 13000000); + + /* These derive from PLL208 */ + clk = clk_register_fixed_rate(NULL, "pll208", NULL, + CLK_IS_ROOT, 208000000); + clk = clk_register_fixed_factor(NULL, "app_208_clk", "pll208", + 0, 1, 1); + clk = clk_register_fixed_factor(NULL, "app_104_clk", "pll208", + 0, 1, 2); + clk = clk_register_fixed_factor(NULL, "app_52_clk", "pll208", + 0, 1, 4); + /* The 52 MHz is divided down to 26 MHz */ + clk = clk_register_fixed_factor(NULL, "app_26_clk", "app_52_clk", + 0, 1, 2); + + /* Directly on the AMBA interconnect */ + clk = syscon_clk_register(NULL, "cpu_clk", "app_208_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 3, + syscon_vbase + U300_SYSCON_CERR, 3, + U300_SYSCON_SBCER_CPU_CLK_EN); + clk = syscon_clk_register(NULL, "dmac_clk", "app_52_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 4, + syscon_vbase + U300_SYSCON_CERR, 4, + U300_SYSCON_SBCER_DMAC_CLK_EN); + clk_register_clkdev(clk, NULL, "dma"); + clk = syscon_clk_register(NULL, "fsmc_clk", "app_52_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 6, + syscon_vbase + U300_SYSCON_CERR, 6, + U300_SYSCON_SBCER_NANDIF_CLK_EN); + clk_register_clkdev(clk, NULL, "fsmc-nand"); + clk = syscon_clk_register(NULL, "xgam_clk", "app_52_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 8, + syscon_vbase + U300_SYSCON_CERR, 8, + U300_SYSCON_SBCER_XGAM_CLK_EN); + clk_register_clkdev(clk, NULL, "xgam"); + clk = syscon_clk_register(NULL, "semi_clk", "app_104_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 9, + syscon_vbase + U300_SYSCON_CERR, 9, + U300_SYSCON_SBCER_SEMI_CLK_EN); + clk_register_clkdev(clk, NULL, "semi"); + + /* AHB bridge clocks */ + clk = syscon_clk_register(NULL, "ahb_subsys_clk", "app_52_clk", 0, true, + syscon_vbase + U300_SYSCON_RRR, 10, + syscon_vbase + U300_SYSCON_CERR, 10, + U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN); + clk = syscon_clk_register(NULL, "intcon_clk", "ahb_subsys_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 12, + syscon_vbase + U300_SYSCON_CERR, 12, + /* Cannot be enabled, just taken out of reset */ + 0xFFFFU); + clk_register_clkdev(clk, NULL, "intcon"); + clk = syscon_clk_register(NULL, "emif_clk", "ahb_subsys_clk", 0, false, + syscon_vbase + U300_SYSCON_RRR, 5, + syscon_vbase + U300_SYSCON_CERR, 5, + U300_SYSCON_SBCER_EMIF_CLK_EN); + clk_register_clkdev(clk, NULL, "pl172"); + + /* FAST bridge clocks */ + clk = syscon_clk_register(NULL, "fast_clk", "app_26_clk", 0, true, + syscon_vbase + U300_SYSCON_RFR, 0, + syscon_vbase + U300_SYSCON_CEFR, 0, + U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN); + clk = syscon_clk_register(NULL, "i2c0_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 1, + syscon_vbase + U300_SYSCON_CEFR, 1, + U300_SYSCON_SBCER_I2C0_CLK_EN); + clk_register_clkdev(clk, NULL, "stu300.0"); + clk = syscon_clk_register(NULL, "i2c1_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 2, + syscon_vbase + U300_SYSCON_CEFR, 2, + U300_SYSCON_SBCER_I2C1_CLK_EN); + clk_register_clkdev(clk, NULL, "stu300.1"); + clk = syscon_clk_register(NULL, "mmc_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 5, + syscon_vbase + U300_SYSCON_CEFR, 5, + U300_SYSCON_SBCER_MMC_CLK_EN); + clk_register_clkdev(clk, "apb_pclk", "mmci"); + clk = syscon_clk_register(NULL, "spi_p_clk", "fast_clk", 0, false, + syscon_vbase + U300_SYSCON_RFR, 6, + syscon_vbase + U300_SYSCON_CEFR, 6, + U300_SYSCON_SBCER_SPI_CLK_EN); + /* The SPI has no external clock for the outward bus, uses the pclk */ + clk_register_clkdev(clk, NULL, "pl022"); + clk_register_clkdev(clk, "apb_pclk", "pl022"); + + /* SLOW bridge clocks */ + clk = syscon_clk_register(NULL, "slow_clk", "pll13", 0, true, + syscon_vbase + U300_SYSCON_RSR, 0, + syscon_vbase + U300_SYSCON_CESR, 0, + U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN); + clk = syscon_clk_register(NULL, "uart0_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 1, + syscon_vbase + U300_SYSCON_CESR, 1, + U300_SYSCON_SBCER_UART_CLK_EN); + /* Same clock is used for APB and outward bus */ + clk_register_clkdev(clk, NULL, "uart0"); + clk_register_clkdev(clk, "apb_pclk", "uart0"); + clk = syscon_clk_register(NULL, "gpio_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 4, + syscon_vbase + U300_SYSCON_CESR, 4, + U300_SYSCON_SBCER_GPIO_CLK_EN); + clk_register_clkdev(clk, NULL, "u300-gpio"); + clk = syscon_clk_register(NULL, "keypad_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 5, + syscon_vbase + U300_SYSCON_CESR, 6, + U300_SYSCON_SBCER_KEYPAD_CLK_EN); + clk_register_clkdev(clk, NULL, "coh901461-keypad"); + clk = syscon_clk_register(NULL, "rtc_clk", "slow_clk", 0, true, + syscon_vbase + U300_SYSCON_RSR, 6, + /* No clock enable register bit */ + NULL, 0, 0xFFFFU); + clk_register_clkdev(clk, NULL, "rtc-coh901331"); + clk = syscon_clk_register(NULL, "app_tmr_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 7, + syscon_vbase + U300_SYSCON_CESR, 7, + U300_SYSCON_SBCER_APP_TMR_CLK_EN); + clk_register_clkdev(clk, NULL, "apptimer"); + clk = syscon_clk_register(NULL, "acc_tmr_clk", "slow_clk", 0, false, + syscon_vbase + U300_SYSCON_RSR, 8, + syscon_vbase + U300_SYSCON_CESR, 8, + U300_SYSCON_SBCER_ACC_TMR_CLK_EN); + clk_register_clkdev(clk, NULL, "timer"); + + /* Then this special MMC/SD clock */ + clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false); + clk_register_clkdev(clk, NULL, "mmci"); +} |