Merge branch 'next' into for-linus

5 files changed, 87 insertions, 39 deletions

diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 0acbc7d..e42f1fa 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -195,6 +195,7 @@ enum atp_status_bits {
 struct atp {
 	char			phys[64];
 	struct usb_device	*udev;		/* usb device */
+	struct usb_interface	*intf;		/* usb interface */
 	struct urb		*urb;		/* usb request block */
 	u8			*data;		/* transferred data */
 	struct input_dev	*input;		/* input dev */
@@ -253,8 +254,9 @@ MODULE_PARM_DESC(debug, "Activate debugging output");
  * packets (Report ID 2). This code changes device mode, so it
  * sends raw sensor reports (Report ID 5).
  */
-static int atp_geyser_init(struct usb_device *udev)
+static int atp_geyser_init(struct atp *dev)
 {
+	struct usb_device *udev = dev->udev;
 	char *data;
 	int size;
 	int i;
@@ -262,7 +264,7 @@ static int atp_geyser_init(struct usb_device *udev)
 
 	data = kmalloc(8, GFP_KERNEL);
 	if (!data) {
-		err("Out of memory");
+		dev_err(&dev->intf->dev, "Out of memory\n");
 		return -ENOMEM;
 	}
 
@@ -277,7 +279,7 @@ static int atp_geyser_init(struct usb_device *udev)
 		for (i = 0; i < 8; i++)
 			dprintk("appletouch[%d]: %d\n", i, data[i]);
 
-		err("Failed to read mode from device.");
+		dev_err(&dev->intf->dev, "Failed to read mode from device.\n");
 		ret = -EIO;
 		goto out_free;
 	}
@@ -296,7 +298,7 @@ static int atp_geyser_init(struct usb_device *udev)
 		for (i = 0; i < 8; i++)
 			dprintk("appletouch[%d]: %d\n", i, data[i]);
 
-		err("Failed to request geyser raw mode");
+		dev_err(&dev->intf->dev, "Failed to request geyser raw mode\n");
 		ret = -EIO;
 		goto out_free;
 	}
@@ -313,16 +315,16 @@ out_free:
 static void atp_reinit(struct work_struct *work)
 {
 	struct atp *dev = container_of(work, struct atp, work);
-	struct usb_device *udev = dev->udev;
 	int retval;
 
 	dprintk("appletouch: putting appletouch to sleep (reinit)\n");
-	atp_geyser_init(udev);
+	atp_geyser_init(dev);
 
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
 	if (retval)
-		err("atp_reinit: usb_submit_urb failed with error %d",
-		    retval);
+		dev_err(&dev->intf->dev,
+			"atp_reinit: usb_submit_urb failed with error %d\n",
+			retval);
 }
 
 static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
@@ -400,6 +402,7 @@ static inline void atp_report_fingers(struct input_dev *input, int fingers)
 static int atp_status_check(struct urb *urb)
 {
 	struct atp *dev = urb->context;
+	struct usb_interface *intf = dev->intf;
 
 	switch (urb->status) {
 	case 0:
@@ -407,8 +410,8 @@ static int atp_status_check(struct urb *urb)
 		break;
 	case -EOVERFLOW:
 		if (!dev->overflow_warned) {
-			printk(KERN_WARNING "appletouch: OVERFLOW with data "
-				"length %d, actual length is %d\n",
+			dev_warn(&intf->dev,
+				"appletouch: OVERFLOW with data length %d, actual length is %d\n",
 				dev->info->datalen, dev->urb->actual_length);
 			dev->overflow_warned = true;
 		}
@@ -416,13 +419,15 @@ static int atp_status_check(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* This urb is terminated, clean up */
-		dbg("atp_complete: urb shutting down with status: %d",
-		    urb->status);
+		dev_dbg(&intf->dev,
+			"atp_complete: urb shutting down with status: %d\n",
+			urb->status);
 		return ATP_URB_STATUS_ERROR_FATAL;
 
 	default:
-		dbg("atp_complete: nonzero urb status received: %d",
-		    urb->status);
+		dev_dbg(&intf->dev,
+			"atp_complete: nonzero urb status received: %d\n",
+			urb->status);
 		return ATP_URB_STATUS_ERROR;
 	}
 
@@ -445,7 +450,8 @@ static void atp_detect_size(struct atp *dev)
 	for (i = dev->info->xsensors; i < ATP_XSENSORS; i++) {
 		if (dev->xy_cur[i]) {
 
-			printk(KERN_INFO "appletouch: 17\" model detected.\n");
+			dev_info(&dev->intf->dev,
+				"appletouch: 17\" model detected.\n");
 
 			input_set_abs_params(dev->input, ABS_X, 0,
 					     (dev->info->xsensors_17 - 1) *
@@ -588,8 +594,9 @@ static void atp_complete_geyser_1_2(struct urb *urb)
  exit:
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
 	if (retval)
-		err("atp_complete: usb_submit_urb failed with result %d",
-		    retval);
+		dev_err(&dev->intf->dev,
+			"atp_complete: usb_submit_urb failed with result %d\n",
+			retval);
 }
 
 /* Interrupt function for older touchpads: GEYSER3/GEYSER4 */
@@ -722,8 +729,9 @@ static void atp_complete_geyser_3_4(struct urb *urb)
  exit:
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
 	if (retval)
-		err("atp_complete: usb_submit_urb failed with result %d",
-		    retval);
+		dev_err(&dev->intf->dev,
+			"atp_complete: usb_submit_urb failed with result %d\n",
+			retval);
 }
 
 static int atp_open(struct input_dev *input)
@@ -748,14 +756,12 @@ static void atp_close(struct input_dev *input)
 
 static int atp_handle_geyser(struct atp *dev)
 {
-	struct usb_device *udev = dev->udev;
-
 	if (dev->info != &fountain_info) {
 		/* switch to raw sensor mode */
-		if (atp_geyser_init(udev))
+		if (atp_geyser_init(dev))
 			return -EIO;
 
-		printk(KERN_INFO "appletouch: Geyser mode initialized.\n");
+		dev_info(&dev->intf->dev, "Geyser mode initialized.\n");
 	}
 
 	return 0;
@@ -785,7 +791,7 @@ static int atp_probe(struct usb_interface *iface,
 		}
 	}
 	if (!int_in_endpointAddr) {
-		err("Could not find int-in endpoint");
+		dev_err(&iface->dev, "Could not find int-in endpoint\n");
 		return -EIO;
 	}
 
@@ -793,11 +799,12 @@ static int atp_probe(struct usb_interface *iface,
 	dev = kzalloc(sizeof(struct atp), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!dev || !input_dev) {
-		err("Out of memory");
+		dev_err(&iface->dev, "Out of memory\n");
 		goto err_free_devs;
 	}
 
 	dev->udev = udev;
+	dev->intf = iface;
 	dev->input = input_dev;
 	dev->info = info;
 	dev->overflow_warned = false;
@@ -886,7 +893,7 @@ static void atp_disconnect(struct usb_interface *iface)
 		usb_free_urb(dev->urb);
 		kfree(dev);
 	}
-	printk(KERN_INFO "input: appletouch disconnected\n");
+	dev_info(&iface->dev, "input: appletouch disconnected\n");
 }
 
 static int atp_recover(struct atp *dev)
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index e410b98..d528c23 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -604,7 +604,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 	int retval = 0, size;
 
 	if (!data) {
-		err("bcm5974: out of memory");
+		dev_err(&dev->intf->dev, "out of memory\n");
 		retval = -ENOMEM;
 		goto out;
 	}
@@ -617,7 +617,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 			BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
 
 	if (size != 8) {
-		err("bcm5974: could not read from device");
+		dev_err(&dev->intf->dev, "could not read from device\n");
 		retval = -EIO;
 		goto out;
 	}
@@ -635,7 +635,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 			BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
 
 	if (size != 8) {
-		err("bcm5974: could not write to device");
+		dev_err(&dev->intf->dev, "could not write to device\n");
 		retval = -EIO;
 		goto out;
 	}
@@ -651,6 +651,7 @@ static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 static void bcm5974_irq_button(struct urb *urb)
 {
 	struct bcm5974 *dev = urb->context;
+	struct usb_interface *intf = dev->intf;
 	int error;
 
 	switch (urb->status) {
@@ -660,10 +661,11 @@ static void bcm5974_irq_button(struct urb *urb)
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
-		dbg("bcm5974: button urb shutting down: %d", urb->status);
+		dev_dbg(&intf->dev, "button urb shutting down: %d\n",
+			urb->status);
 		return;
 	default:
-		dbg("bcm5974: button urb status: %d", urb->status);
+		dev_dbg(&intf->dev, "button urb status: %d\n", urb->status);
 		goto exit;
 	}
 
@@ -674,12 +676,13 @@ static void bcm5974_irq_button(struct urb *urb)
 exit:
 	error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
 	if (error)
-		err("bcm5974: button urb failed: %d", error);
+		dev_err(&intf->dev, "button urb failed: %d\n", error);
 }
 
 static void bcm5974_irq_trackpad(struct urb *urb)
 {
 	struct bcm5974 *dev = urb->context;
+	struct usb_interface *intf = dev->intf;
 	int error;
 
 	switch (urb->status) {
@@ -689,10 +692,11 @@ static void bcm5974_irq_trackpad(struct urb *urb)
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
-		dbg("bcm5974: trackpad urb shutting down: %d", urb->status);
+		dev_dbg(&intf->dev, "trackpad urb shutting down: %d\n",
+			urb->status);
 		return;
 	default:
-		dbg("bcm5974: trackpad urb status: %d", urb->status);
+		dev_dbg(&intf->dev, "trackpad urb status: %d\n", urb->status);
 		goto exit;
 	}
 
@@ -707,7 +711,7 @@ static void bcm5974_irq_trackpad(struct urb *urb)
 exit:
 	error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
 	if (error)
-		err("bcm5974: trackpad urb failed: %d", error);
+		dev_err(&intf->dev, "trackpad urb failed: %d\n", error);
 }
 
 /*
@@ -853,7 +857,7 @@ static int bcm5974_probe(struct usb_interface *iface,
 	dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!dev || !input_dev) {
-		err("bcm5974: out of memory");
+		dev_err(&iface->dev, "out of memory\n");
 		goto err_free_devs;
 	}
 
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index c703d53..d5b390f 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -139,6 +139,35 @@ static int synaptics_model_id(struct psmouse *psmouse)
 }
 
 /*
+ * Read the board id from the touchpad
+ * The board id is encoded in the "QUERY MODES" response
+ */
+static int synaptics_board_id(struct psmouse *psmouse)
+{
+	struct synaptics_data *priv = psmouse->private;
+	unsigned char bid[3];
+
+	if (synaptics_send_cmd(psmouse, SYN_QUE_MODES, bid))
+		return -1;
+	priv->board_id = ((bid[0] & 0xfc) << 6) | bid[1];
+	return 0;
+}
+
+/*
+ * Read the firmware id from the touchpad
+ */
+static int synaptics_firmware_id(struct psmouse *psmouse)
+{
+	struct synaptics_data *priv = psmouse->private;
+	unsigned char fwid[3];
+
+	if (synaptics_send_cmd(psmouse, SYN_QUE_FIRMWARE_ID, fwid))
+		return -1;
+	priv->firmware_id = (fwid[0] << 16) | (fwid[1] << 8) | fwid[2];
+	return 0;
+}
+
+/*
  * Read the capability-bits from the touchpad
  * see also the SYN_CAP_* macros
  */
@@ -261,6 +290,10 @@ static int synaptics_query_hardware(struct psmouse *psmouse)
 		return -1;
 	if (synaptics_model_id(psmouse))
 		return -1;
+	if (synaptics_firmware_id(psmouse))
+		return -1;
+	if (synaptics_board_id(psmouse))
+		return -1;
 	if (synaptics_capability(psmouse))
 		return -1;
 	if (synaptics_resolution(psmouse))
@@ -1435,11 +1468,12 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
 	priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
 
 	psmouse_info(psmouse,
-		     "Touchpad model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
+		     "Touchpad model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx, board id: %lu, fw id: %lu\n",
 		     SYN_ID_MODEL(priv->identity),
 		     SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
 		     priv->model_id,
-		     priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
+		     priv->capabilities, priv->ext_cap, priv->ext_cap_0c,
+		     priv->board_id, priv->firmware_id);
 
 	set_input_params(psmouse->dev, priv);
 
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index fd26ccc..e594af0 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -18,6 +18,7 @@
 #define SYN_QUE_SERIAL_NUMBER_SUFFIX	0x07
 #define SYN_QUE_RESOLUTION		0x08
 #define SYN_QUE_EXT_CAPAB		0x09
+#define SYN_QUE_FIRMWARE_ID		0x0a
 #define SYN_QUE_EXT_CAPAB_0C		0x0c
 #define SYN_QUE_EXT_MAX_COORDS		0x0d
 #define SYN_QUE_EXT_MIN_COORDS		0x0f
@@ -148,6 +149,8 @@ struct synaptics_hw_state {
 struct synaptics_data {
 	/* Data read from the touchpad */
 	unsigned long int model_id;		/* Model-ID */
+	unsigned long int firmware_id;		/* Firmware-ID */
+	unsigned long int board_id;		/* Board-ID */
 	unsigned long int capabilities;		/* Capabilities */
 	unsigned long int ext_cap;		/* Extended Capabilities */
 	unsigned long int ext_cap_0c;		/* Ext Caps from 0x0c query */
diff --git a/drivers/input/mouse/synaptics_usb.c b/drivers/input/mouse/synaptics_usb.c
index 3c5eaaa..64cf34e 100644
--- a/drivers/input/mouse/synaptics_usb.c
+++ b/drivers/input/mouse/synaptics_usb.c
@@ -364,7 +364,7 @@ static int synusb_probe(struct usb_interface *intf,
 			 le16_to_cpu(udev->descriptor.idProduct));
 
 	if (synusb->flags & SYNUSB_STICK)
-		strlcat(synusb->name, " (Stick) ", sizeof(synusb->name));
+		strlcat(synusb->name, " (Stick)", sizeof(synusb->name));
 
 	usb_make_path(udev, synusb->phys, sizeof(synusb->phys));
 	strlcat(synusb->phys, "/input0", sizeof(synusb->phys));