isdn: whitespace coding style cleanup

isdn source code uses a not-current coding style.

Update the coding style used on a per-line basis
so that git diff -w shows only elided blank lines
at EOF.

Done with emacs and some scripts and some typing.

Built x86 allyesconfig.
No detected change in objdump -d or size.

Signed-off-by: Joe Perches <joe@perches.com>

1 files changed, 92 insertions, 92 deletions

diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index e775706..c9c98f0 100644
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -4,7 +4,7 @@
  *
  * Author       Roland Klabunde
  * Copyright    by Roland Klabunde   <R.Klabunde@Berkom.de>
- * 
+ *
  * This software may be used and distributed according to the terms
  * of the GNU General Public License, incorporated herein by reference.
  *
@@ -34,7 +34,7 @@ static const char *sct_quadro_subtypes[] =
 };
 
 
-#define wordout(addr,val) outw(val,addr)
+#define wordout(addr, val) outw(val, addr)
 #define wordin(addr) inw(addr)
 
 static inline u_char
@@ -47,7 +47,7 @@ readreg(unsigned int ale, unsigned int adr, u_char off)
 }
 
 static inline void
-readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+readfifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
 {
 	int i;
 	wordout(ale, off);
@@ -64,7 +64,7 @@ writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
 }
 
 static inline void
-writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+writefifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
 {
 	int i;
 	wordout(ale, off);
@@ -87,13 +87,13 @@ WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
 }
 
 static void
-ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
 {
 	readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
 }
 
 static void
-WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
 {
 	writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
 }
@@ -117,21 +117,21 @@ set_ipac_active(struct IsdnCardState *cs, u_int active)
 {
 	/* set irq mask */
 	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
-		active ? 0xc0 : 0xff);
+		 active ? 0xc0 : 0xff);
 }
 
 /*
  * fast interrupt HSCX stuff goes here
  */
 
-#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
-	cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
-#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
-	cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
-#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
-	cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
-#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
-	cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
+#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base,			\
+				      cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
+#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base,		\
+					      cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
+#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base,		\
+						cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
+#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base,	\
+						  cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
 
 #include "hscx_irq.c"
 
@@ -148,7 +148,7 @@ bkm_interrupt_ipac(int intno, void *dev_id)
 		spin_unlock_irqrestore(&cs->lock, flags);
 		return IRQ_NONE;
 	}
-      Start_IPAC:
+Start_IPAC:
 	if (cs->debug & L1_DEB_IPAC)
 		debugl1(cs, "IPAC ISTA %02X", ista);
 	if (ista & 0x0f) {
@@ -224,33 +224,33 @@ BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	u_long flags;
 
 	switch (mt) {
-		case CARD_RESET:
-			spin_lock_irqsave(&cs->lock, flags);
-			/* Disable ints */
-			set_ipac_active(cs, 0);
-			enable_bkm_int(cs, 0);
-			reset_bkm(cs);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			return (0);
-		case CARD_RELEASE:
-			/* Sanity */
-			spin_lock_irqsave(&cs->lock, flags);
-			set_ipac_active(cs, 0);
-			enable_bkm_int(cs, 0);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			release_io_sct_quadro(cs);
-			return (0);
-		case CARD_INIT:
-			spin_lock_irqsave(&cs->lock, flags);
-			cs->debug |= L1_DEB_IPAC;
-			set_ipac_active(cs, 1);
-			inithscxisac(cs, 3);
-			/* Enable ints */
-			enable_bkm_int(cs, 1);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			return (0);
-		case CARD_TEST:
-			return (0);
+	case CARD_RESET:
+		spin_lock_irqsave(&cs->lock, flags);
+		/* Disable ints */
+		set_ipac_active(cs, 0);
+		enable_bkm_int(cs, 0);
+		reset_bkm(cs);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return (0);
+	case CARD_RELEASE:
+		/* Sanity */
+		spin_lock_irqsave(&cs->lock, flags);
+		set_ipac_active(cs, 0);
+		enable_bkm_int(cs, 0);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		release_io_sct_quadro(cs);
+		return (0);
+	case CARD_INIT:
+		spin_lock_irqsave(&cs->lock, flags);
+		cs->debug |= L1_DEB_IPAC;
+		set_ipac_active(cs, 1);
+		inithscxisac(cs, 3);
+		/* Enable ints */
+		enable_bkm_int(cs, 1);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return (0);
+	case CARD_TEST:
+		return (0);
 	}
 	return (0);
 }
@@ -260,11 +260,11 @@ sct_alloc_io(u_int adr, u_int len)
 {
 	if (!request_region(adr, len, "scitel")) {
 		printk(KERN_WARNING
-			"HiSax: Scitel port %#x-%#x already in use\n",
-			adr, adr + len);
+		       "HiSax: Scitel port %#x-%#x already in use\n",
+		       adr, adr + len);
 		return (1);
 	}
-	return(0);
+	return (0);
 }
 
 static struct pci_dev *dev_a8 __devinitdata = NULL;
@@ -298,18 +298,18 @@ setup_sct_quadro(struct IsdnCard *card)
 		return (0);
 	}
 	if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
-		(sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
+				      (sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
 		return (0);
 	if (cs->subtyp == SCT_1) {
 		while ((dev_a8 = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
-			PCI_DEVICE_ID_PLX_9050, dev_a8))) {
-			
+						       PCI_DEVICE_ID_PLX_9050, dev_a8))) {
+
 			sub_vendor_id = dev_a8->subsystem_vendor;
 			sub_sys_id = dev_a8->subsystem_device;
 			if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
-				(sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
+			    (sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
 				if (pci_enable_device(dev_a8))
-					return(0);
+					return (0);
 				pci_ioaddr1 = pci_resource_start(dev_a8, 1);
 				pci_irq = dev_a8->irq;
 				pci_bus = dev_a8->bus->number;
@@ -320,23 +320,23 @@ setup_sct_quadro(struct IsdnCard *card)
 		}
 		if (!found) {
 			printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
-				"Card not found\n",
-				sct_quadro_subtypes[cs->subtyp]);
+			       "Card not found\n",
+			       sct_quadro_subtypes[cs->subtyp]);
 			return (0);
 		}
 #ifdef ATTEMPT_PCI_REMAPPING
 /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
 		if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
 			printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
-				"PLX rev 1, remapping required!\n",
-				sct_quadro_subtypes[cs->subtyp]);
+			       "PLX rev 1, remapping required!\n",
+			       sct_quadro_subtypes[cs->subtyp]);
 			/* Restart PCI negotiation */
-			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
+			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int)-1);
 			/* Move up by 0x80 byte */
 			pci_ioaddr1 += 0x80;
 			pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
 			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
-			dev_a8->resource[ 1].start = pci_ioaddr1;
+			dev_a8->resource[1].start = pci_ioaddr1;
 		}
 #endif /* End HACK */
 	}
@@ -371,39 +371,39 @@ setup_sct_quadro(struct IsdnCard *card)
 	/* pci_ioaddr5 is for the first subdevice only */
 	cs->hw.ax.plx_adr = pci_ioaddr1;
 	/* Enter all ipac_base addresses */
-	switch(cs->subtyp) {
-		case 1:
-			cs->hw.ax.base = pci_ioaddr5 + 0x00;
-			if (sct_alloc_io(pci_ioaddr1, 128))
-				return(0);
-			if (sct_alloc_io(pci_ioaddr5, 64))
-				return(0);
-			/* disable all IPAC */
-			writereg(pci_ioaddr5, pci_ioaddr5 + 4,
-				IPAC_MASK, 0xFF);
-			writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
-				IPAC_MASK, 0xFF);
-			writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
-				IPAC_MASK, 0xFF);
-			writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
-				IPAC_MASK, 0xFF);
-			break;
-		case 2:
-			cs->hw.ax.base = pci_ioaddr4 + 0x08;
-			if (sct_alloc_io(pci_ioaddr4, 64))
-				return(0);
-			break;
-		case 3:
-			cs->hw.ax.base = pci_ioaddr3 + 0x10;
-			if (sct_alloc_io(pci_ioaddr3, 64))
-				return(0);
-			break;
-		case 4:
-			cs->hw.ax.base = pci_ioaddr2 + 0x20;
-			if (sct_alloc_io(pci_ioaddr2, 64))
-				return(0);
-			break;
-	}	
+	switch (cs->subtyp) {
+	case 1:
+		cs->hw.ax.base = pci_ioaddr5 + 0x00;
+		if (sct_alloc_io(pci_ioaddr1, 128))
+			return (0);
+		if (sct_alloc_io(pci_ioaddr5, 64))
+			return (0);
+		/* disable all IPAC */
+		writereg(pci_ioaddr5, pci_ioaddr5 + 4,
+			 IPAC_MASK, 0xFF);
+		writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
+			 IPAC_MASK, 0xFF);
+		writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
+			 IPAC_MASK, 0xFF);
+		writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
+			 IPAC_MASK, 0xFF);
+		break;
+	case 2:
+		cs->hw.ax.base = pci_ioaddr4 + 0x08;
+		if (sct_alloc_io(pci_ioaddr4, 64))
+			return (0);
+		break;
+	case 3:
+		cs->hw.ax.base = pci_ioaddr3 + 0x10;
+		if (sct_alloc_io(pci_ioaddr3, 64))
+			return (0);
+		break;
+	case 4:
+		cs->hw.ax.base = pci_ioaddr2 + 0x20;
+		if (sct_alloc_io(pci_ioaddr2, 64))
+			return (0);
+		break;
+	}
 	/* For isac and hscx data path */
 	cs->hw.ax.data_adr = cs->hw.ax.base + 4;
 
@@ -429,7 +429,7 @@ setup_sct_quadro(struct IsdnCard *card)
 	cs->irq_func = &bkm_interrupt_ipac;
 
 	printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
-		sct_quadro_subtypes[cs->subtyp],
-		readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
+	       sct_quadro_subtypes[cs->subtyp],
+	       readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
 	return (1);
 }