mfd: Add a core driver for TI TPS61050/TPS61052 chips v2

The TPS61050/TPS61052 are boost converters, LED drivers, LED flash
drivers and a simple GPIO pin chips.

Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Jonas Aberg <jonas.aberg@stericsson.com>
Cc: Ola Lilja <ola.o.lilja@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 246 insertions, 0 deletions

diff --git a/drivers/mfd/tps6105x.c b/drivers/mfd/tps6105x.c
new file mode 100644
index 0000000..46d8205
--- /dev/null
+++ b/drivers/mfd/tps6105x.c
@@ -0,0 +1,246 @@
+/*
+ * Core driver for TPS61050/61052 boost converters, used for while LED
+ * driving, audio power amplification, white LED flash, and generic
+ * boost conversion. Additionally it provides a 1-bit GPIO pin (out or in)
+ * and a flash synchronization pin to synchronize flash events when used as
+ * flashgun.
+ *
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps6105x.h>
+
+int tps6105x_set(struct tps6105x *tps6105x, u8 reg, u8 value)
+{
+	int ret;
+
+	ret = mutex_lock_interruptible(&tps6105x->lock);
+	if (ret)
+		return ret;
+	ret = i2c_smbus_write_byte_data(tps6105x->client, reg, value);
+	mutex_unlock(&tps6105x->lock);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL(tps6105x_set);
+
+int tps6105x_get(struct tps6105x *tps6105x, u8 reg, u8 *buf)
+{
+	int ret;
+
+	ret = mutex_lock_interruptible(&tps6105x->lock);
+	if (ret)
+		return ret;
+	ret = i2c_smbus_read_byte_data(tps6105x->client, reg);
+	mutex_unlock(&tps6105x->lock);
+	if (ret < 0)
+		return ret;
+
+	*buf = ret;
+	return 0;
+}
+EXPORT_SYMBOL(tps6105x_get);
+
+/*
+ * Masks off the bits in the mask and sets the bits in the bitvalues
+ * parameter in one atomic operation
+ */
+int tps6105x_mask_and_set(struct tps6105x *tps6105x, u8 reg,
+			  u8 bitmask, u8 bitvalues)
+{
+	int ret;
+	u8 regval;
+
+	ret = mutex_lock_interruptible(&tps6105x->lock);
+	if (ret)
+		return ret;
+	ret = i2c_smbus_read_byte_data(tps6105x->client, reg);
+	if (ret < 0)
+		goto fail;
+	regval = ret;
+	regval = (~bitmask & regval) | (bitmask & bitvalues);
+	ret = i2c_smbus_write_byte_data(tps6105x->client, reg, regval);
+fail:
+	mutex_unlock(&tps6105x->lock);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+EXPORT_SYMBOL(tps6105x_mask_and_set);
+
+static int __devinit tps6105x_startup(struct tps6105x *tps6105x)
+{
+	int ret;
+	u8 regval;
+
+	ret = tps6105x_get(tps6105x, TPS6105X_REG_0, &regval);
+	if (ret)
+		return ret;
+	switch (regval >> TPS6105X_REG0_MODE_SHIFT) {
+	case TPS6105X_REG0_MODE_SHUTDOWN:
+		dev_info(&tps6105x->client->dev,
+			 "TPS6105x found in SHUTDOWN mode\n");
+		break;
+	case TPS6105X_REG0_MODE_TORCH:
+		dev_info(&tps6105x->client->dev,
+			 "TPS6105x found in TORCH mode\n");
+		break;
+	case TPS6105X_REG0_MODE_TORCH_FLASH:
+		dev_info(&tps6105x->client->dev,
+			 "TPS6105x found in FLASH mode\n");
+		break;
+	case TPS6105X_REG0_MODE_VOLTAGE:
+		dev_info(&tps6105x->client->dev,
+			 "TPS6105x found in VOLTAGE mode\n");
+		break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * MFD cells - we have one cell which is selected operation
+ * mode, and we always have a GPIO cell.
+ */
+static struct mfd_cell tps6105x_cells[] = {
+	{
+		/* name will be runtime assigned */
+		.id = -1,
+	},
+	{
+		.name = "tps6105x-gpio",
+		.id = -1,
+	},
+};
+
+static int __devinit tps6105x_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct tps6105x			*tps6105x;
+	struct tps6105x_platform_data	*pdata;
+	int ret;
+	int i;
+
+	tps6105x = kmalloc(sizeof(*tps6105x), GFP_KERNEL);
+	if (!tps6105x)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, tps6105x);
+	tps6105x->client = client;
+	pdata = client->dev.platform_data;
+	tps6105x->pdata = pdata;
+	mutex_init(&tps6105x->lock);
+
+	ret = tps6105x_startup(tps6105x);
+	if (ret) {
+		dev_err(&client->dev, "chip initialization failed\n");
+		goto fail;
+	}
+
+	/* Remove warning texts when you implement new cell drivers */
+	switch (pdata->mode) {
+	case TPS6105X_MODE_SHUTDOWN:
+		dev_info(&client->dev,
+			 "present, not used for anything, only GPIO\n");
+		break;
+	case TPS6105X_MODE_TORCH:
+		tps6105x_cells[0].name = "tps6105x-leds";
+		dev_warn(&client->dev,
+			 "torch mode is unsupported\n");
+		break;
+	case TPS6105X_MODE_TORCH_FLASH:
+		tps6105x_cells[0].name = "tps6105x-flash";
+		dev_warn(&client->dev,
+			 "flash mode is unsupported\n");
+		break;
+	case TPS6105X_MODE_VOLTAGE:
+		tps6105x_cells[0].name ="tps6105x-regulator";
+		break;
+	default:
+		break;
+	}
+
+	/* Set up and register the platform devices. */
+	for (i = 0; i < ARRAY_SIZE(tps6105x_cells); i++) {
+		/* One state holder for all drivers, this is simple */
+		tps6105x_cells[i].mfd_data = tps6105x;
+	}
+
+	ret = mfd_add_devices(&client->dev, 0, tps6105x_cells,
+		ARRAY_SIZE(tps6105x_cells), NULL, 0);
+	if (ret)
+		goto fail;
+
+	return 0;
+
+fail:
+	kfree(tps6105x);
+	return ret;
+}
+
+static int __devexit tps6105x_remove(struct i2c_client *client)
+{
+	struct tps6105x *tps6105x = i2c_get_clientdata(client);
+
+	mfd_remove_devices(&client->dev);
+
+	/* Put chip in shutdown mode */
+	tps6105x_mask_and_set(tps6105x, TPS6105X_REG_0,
+		TPS6105X_REG0_MODE_MASK,
+		TPS6105X_MODE_SHUTDOWN << TPS6105X_REG0_MODE_SHIFT);
+
+	kfree(tps6105x);
+	return 0;
+}
+
+static const struct i2c_device_id tps6105x_id[] = {
+	{ "tps61050", 0 },
+	{ "tps61052", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tps6105x_id);
+
+static struct i2c_driver tps6105x_driver = {
+	.driver = {
+		.name	= "tps6105x",
+	},
+	.probe		= tps6105x_probe,
+	.remove		= __devexit_p(tps6105x_remove),
+	.id_table	= tps6105x_id,
+};
+
+static int __init tps6105x_init(void)
+{
+	return i2c_add_driver(&tps6105x_driver);
+}
+subsys_initcall(tps6105x_init);
+
+static void __exit tps6105x_exit(void)
+{
+	i2c_del_driver(&tps6105x_driver);
+}
+module_exit(tps6105x_exit);
+
+MODULE_AUTHOR("Linus Walleij");
+MODULE_DESCRIPTION("TPS6105x White LED Boost Converter Driver");
+MODULE_LICENSE("GPL v2");