aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/sungem_phy.c
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-05-12 23:04:46 -0700
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-08-11 02:33:43 -0700
commite689cf4a042772f727450035b102579b0c01bdc7 (patch)
treef2b17aa21b8358a8f7589fed46fa08688b439464 /drivers/net/sungem_phy.c
parent8efc91254fda97ee78e2e0b8e016120e664131de (diff)
downloadkernel_goldelico_gta04-e689cf4a042772f727450035b102579b0c01bdc7.zip
kernel_goldelico_gta04-e689cf4a042772f727450035b102579b0c01bdc7.tar.gz
kernel_goldelico_gta04-e689cf4a042772f727450035b102579b0c01bdc7.tar.bz2
cassini/niu/sun*: Move the Sun drivers
Moves the Sun drivers into drivers/net/ethernet/sun/ and make the necessary Kconfig and Makefile changes. Oliver Hartkopp <socketcan@hartkopp.net> suggested removing the sun* prefix on the driver names. This type of change I will leave up to the driver maintainers. CC: Sam Creasey <sammy@sammy.net> CC: Adrian Sun <asun@darksunrising.com> CC: Benjamin Herrenscmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/sungem_phy.c')
-rw-r--r--drivers/net/sungem_phy.c1200
1 files changed, 0 insertions, 1200 deletions
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
deleted file mode 100644
index d16880d..0000000
--- a/drivers/net/sungem_phy.c
+++ /dev/null
@@ -1,1200 +0,0 @@
-/*
- * PHY drivers for the sungem ethernet driver.
- *
- * This file could be shared with other drivers.
- *
- * (c) 2002-2007, Benjamin Herrenscmidt (benh@kernel.crashing.org)
- *
- * TODO:
- * - Add support for PHYs that provide an IRQ line
- * - Eventually moved the entire polling state machine in
- * there (out of the eth driver), so that it can easily be
- * skipped on PHYs that implement it in hardware.
- * - On LXT971 & BCM5201, Apple uses some chip specific regs
- * to read the link status. Figure out why and if it makes
- * sense to do the same (magic aneg ?)
- * - Apple has some additional power management code for some
- * Broadcom PHYs that they "hide" from the OpenSource version
- * of darwin, still need to reverse engineer that
- */
-
-
-#include <linux/module.h>
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/delay.h>
-
-#ifdef CONFIG_PPC_PMAC
-#include <asm/prom.h>
-#endif
-
-#include "sungem_phy.h"
-
-/* Link modes of the BCM5400 PHY */
-static const int phy_BCM5400_link_table[8][3] = {
- { 0, 0, 0 }, /* No link */
- { 0, 0, 0 }, /* 10BT Half Duplex */
- { 1, 0, 0 }, /* 10BT Full Duplex */
- { 0, 1, 0 }, /* 100BT Half Duplex */
- { 0, 1, 0 }, /* 100BT Half Duplex */
- { 1, 1, 0 }, /* 100BT Full Duplex*/
- { 1, 0, 1 }, /* 1000BT */
- { 1, 0, 1 }, /* 1000BT */
-};
-
-static inline int __phy_read(struct mii_phy* phy, int id, int reg)
-{
- return phy->mdio_read(phy->dev, id, reg);
-}
-
-static inline void __phy_write(struct mii_phy* phy, int id, int reg, int val)
-{
- phy->mdio_write(phy->dev, id, reg, val);
-}
-
-static inline int phy_read(struct mii_phy* phy, int reg)
-{
- return phy->mdio_read(phy->dev, phy->mii_id, reg);
-}
-
-static inline void phy_write(struct mii_phy* phy, int reg, int val)
-{
- phy->mdio_write(phy->dev, phy->mii_id, reg, val);
-}
-
-static int reset_one_mii_phy(struct mii_phy* phy, int phy_id)
-{
- u16 val;
- int limit = 10000;
-
- val = __phy_read(phy, phy_id, MII_BMCR);
- val &= ~(BMCR_ISOLATE | BMCR_PDOWN);
- val |= BMCR_RESET;
- __phy_write(phy, phy_id, MII_BMCR, val);
-
- udelay(100);
-
- while (--limit) {
- val = __phy_read(phy, phy_id, MII_BMCR);
- if ((val & BMCR_RESET) == 0)
- break;
- udelay(10);
- }
- if ((val & BMCR_ISOLATE) && limit > 0)
- __phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
-
- return limit <= 0;
-}
-
-static int bcm5201_init(struct mii_phy* phy)
-{
- u16 data;
-
- data = phy_read(phy, MII_BCM5201_MULTIPHY);
- data &= ~MII_BCM5201_MULTIPHY_SUPERISOLATE;
- phy_write(phy, MII_BCM5201_MULTIPHY, data);
-
- phy_write(phy, MII_BCM5201_INTERRUPT, 0);
-
- return 0;
-}
-
-static int bcm5201_suspend(struct mii_phy* phy)
-{
- phy_write(phy, MII_BCM5201_INTERRUPT, 0);
- phy_write(phy, MII_BCM5201_MULTIPHY, MII_BCM5201_MULTIPHY_SUPERISOLATE);
-
- return 0;
-}
-
-static int bcm5221_init(struct mii_phy* phy)
-{
- u16 data;
-
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
- data | MII_BCM5221_TEST_ENABLE_SHADOWS);
-
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
- data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
-
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
- data | MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR);
-
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
- data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
-
- return 0;
-}
-
-static int bcm5221_suspend(struct mii_phy* phy)
-{
- u16 data;
-
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
- data | MII_BCM5221_TEST_ENABLE_SHADOWS);
-
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
- data | MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE);
-
- return 0;
-}
-
-static int bcm5241_init(struct mii_phy* phy)
-{
- u16 data;
-
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
- data | MII_BCM5221_TEST_ENABLE_SHADOWS);
-
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,
- data | MII_BCM5221_SHDOW_AUX_STAT2_APD);
-
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
- data & ~MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
-
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
- data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);
-
- return 0;
-}
-
-static int bcm5241_suspend(struct mii_phy* phy)
-{
- u16 data;
-
- data = phy_read(phy, MII_BCM5221_TEST);
- phy_write(phy, MII_BCM5221_TEST,
- data | MII_BCM5221_TEST_ENABLE_SHADOWS);
-
- data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);
- phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,
- data | MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);
-
- return 0;
-}
-
-static int bcm5400_init(struct mii_phy* phy)
-{
- u16 data;
-
- /* Configure for gigabit full duplex */
- data = phy_read(phy, MII_BCM5400_AUXCONTROL);
- data |= MII_BCM5400_AUXCONTROL_PWR10BASET;
- phy_write(phy, MII_BCM5400_AUXCONTROL, data);
-
- data = phy_read(phy, MII_BCM5400_GB_CONTROL);
- data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
- phy_write(phy, MII_BCM5400_GB_CONTROL, data);
-
- udelay(100);
-
- /* Reset and configure cascaded 10/100 PHY */
- (void)reset_one_mii_phy(phy, 0x1f);
-
- data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
- data |= MII_BCM5201_MULTIPHY_SERIALMODE;
- __phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
-
- data = phy_read(phy, MII_BCM5400_AUXCONTROL);
- data &= ~MII_BCM5400_AUXCONTROL_PWR10BASET;
- phy_write(phy, MII_BCM5400_AUXCONTROL, data);
-
- return 0;
-}
-
-static int bcm5400_suspend(struct mii_phy* phy)
-{
-#if 0 /* Commented out in Darwin... someone has those dawn docs ? */
- phy_write(phy, MII_BMCR, BMCR_PDOWN);
-#endif
- return 0;
-}
-
-static int bcm5401_init(struct mii_phy* phy)
-{
- u16 data;
- int rev;
-
- rev = phy_read(phy, MII_PHYSID2) & 0x000f;
- if (rev == 0 || rev == 3) {
- /* Some revisions of 5401 appear to need this
- * initialisation sequence to disable, according
- * to OF, "tap power management"
- *
- * WARNING ! OF and Darwin don't agree on the
- * register addresses. OF seem to interpret the
- * register numbers below as decimal
- *
- * Note: This should (and does) match tg3_init_5401phy_dsp
- * in the tg3.c driver. -DaveM
- */
- phy_write(phy, 0x18, 0x0c20);
- phy_write(phy, 0x17, 0x0012);
- phy_write(phy, 0x15, 0x1804);
- phy_write(phy, 0x17, 0x0013);
- phy_write(phy, 0x15, 0x1204);
- phy_write(phy, 0x17, 0x8006);
- phy_write(phy, 0x15, 0x0132);
- phy_write(phy, 0x17, 0x8006);
- phy_write(phy, 0x15, 0x0232);
- phy_write(phy, 0x17, 0x201f);
- phy_write(phy, 0x15, 0x0a20);
- }
-
- /* Configure for gigabit full duplex */
- data = phy_read(phy, MII_BCM5400_GB_CONTROL);
- data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
- phy_write(phy, MII_BCM5400_GB_CONTROL, data);
-
- udelay(10);
-
- /* Reset and configure cascaded 10/100 PHY */
- (void)reset_one_mii_phy(phy, 0x1f);
-
- data = __phy_read(phy, 0x1f, MII_BCM5201_MULTIPHY);
- data |= MII_BCM5201_MULTIPHY_SERIALMODE;
- __phy_write(phy, 0x1f, MII_BCM5201_MULTIPHY, data);
-
- return 0;
-}
-
-static int bcm5401_suspend(struct mii_phy* phy)
-{
-#if 0 /* Commented out in Darwin... someone has those dawn docs ? */
- phy_write(phy, MII_BMCR, BMCR_PDOWN);
-#endif
- return 0;
-}
-
-static int bcm5411_init(struct mii_phy* phy)
-{
- u16 data;
-
- /* Here's some more Apple black magic to setup
- * some voltage stuffs.
- */
- phy_write(phy, 0x1c, 0x8c23);
- phy_write(phy, 0x1c, 0x8ca3);
- phy_write(phy, 0x1c, 0x8c23);
-
- /* Here, Apple seems to want to reset it, do
- * it as well
- */
- phy_write(phy, MII_BMCR, BMCR_RESET);
- phy_write(phy, MII_BMCR, 0x1340);
-
- data = phy_read(phy, MII_BCM5400_GB_CONTROL);
- data |= MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP;
- phy_write(phy, MII_BCM5400_GB_CONTROL, data);
-
- udelay(10);
-
- /* Reset and configure cascaded 10/100 PHY */
- (void)reset_one_mii_phy(phy, 0x1f);
-
- return 0;
-}
-
-static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
-{
- u16 ctl, adv;
-
- phy->autoneg = 1;
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = 0;
- phy->advertising = advertise;
-
- /* Setup standard advertise */
- adv = phy_read(phy, MII_ADVERTISE);
- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
- if (advertise & ADVERTISED_10baseT_Half)
- adv |= ADVERTISE_10HALF;
- if (advertise & ADVERTISED_10baseT_Full)
- adv |= ADVERTISE_10FULL;
- if (advertise & ADVERTISED_100baseT_Half)
- adv |= ADVERTISE_100HALF;
- if (advertise & ADVERTISED_100baseT_Full)
- adv |= ADVERTISE_100FULL;
- phy_write(phy, MII_ADVERTISE, adv);
-
- /* Start/Restart aneg */
- ctl = phy_read(phy, MII_BMCR);
- ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
-{
- u16 ctl;
-
- phy->autoneg = 0;
- phy->speed = speed;
- phy->duplex = fd;
- phy->pause = 0;
-
- ctl = phy_read(phy, MII_BMCR);
- ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_ANENABLE);
-
- /* First reset the PHY */
- phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
-
- /* Select speed & duplex */
- switch(speed) {
- case SPEED_10:
- break;
- case SPEED_100:
- ctl |= BMCR_SPEED100;
- break;
- case SPEED_1000:
- default:
- return -EINVAL;
- }
- if (fd == DUPLEX_FULL)
- ctl |= BMCR_FULLDPLX;
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int genmii_poll_link(struct mii_phy *phy)
-{
- u16 status;
-
- (void)phy_read(phy, MII_BMSR);
- status = phy_read(phy, MII_BMSR);
- if ((status & BMSR_LSTATUS) == 0)
- return 0;
- if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
- return 0;
- return 1;
-}
-
-static int genmii_read_link(struct mii_phy *phy)
-{
- u16 lpa;
-
- if (phy->autoneg) {
- lpa = phy_read(phy, MII_LPA);
-
- if (lpa & (LPA_10FULL | LPA_100FULL))
- phy->duplex = DUPLEX_FULL;
- else
- phy->duplex = DUPLEX_HALF;
- if (lpa & (LPA_100FULL | LPA_100HALF))
- phy->speed = SPEED_100;
- else
- phy->speed = SPEED_10;
- phy->pause = 0;
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-
-static int generic_suspend(struct mii_phy* phy)
-{
- phy_write(phy, MII_BMCR, BMCR_PDOWN);
-
- return 0;
-}
-
-static int bcm5421_init(struct mii_phy* phy)
-{
- u16 data;
- unsigned int id;
-
- id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2));
-
- /* Revision 0 of 5421 needs some fixups */
- if (id == 0x002060e0) {
- /* This is borrowed from MacOS
- */
- phy_write(phy, 0x18, 0x1007);
- data = phy_read(phy, 0x18);
- phy_write(phy, 0x18, data | 0x0400);
- phy_write(phy, 0x18, 0x0007);
- data = phy_read(phy, 0x18);
- phy_write(phy, 0x18, data | 0x0800);
- phy_write(phy, 0x17, 0x000a);
- data = phy_read(phy, 0x15);
- phy_write(phy, 0x15, data | 0x0200);
- }
-
- /* Pick up some init code from OF for K2 version */
- if ((id & 0xfffffff0) == 0x002062e0) {
- phy_write(phy, 4, 0x01e1);
- phy_write(phy, 9, 0x0300);
- }
-
- /* Check if we can enable automatic low power */
-#ifdef CONFIG_PPC_PMAC
- if (phy->platform_data) {
- struct device_node *np = of_get_parent(phy->platform_data);
- int can_low_power = 1;
- if (np == NULL || of_get_property(np, "no-autolowpower", NULL))
- can_low_power = 0;
- if (can_low_power) {
- /* Enable automatic low-power */
- phy_write(phy, 0x1c, 0x9002);
- phy_write(phy, 0x1c, 0xa821);
- phy_write(phy, 0x1c, 0x941d);
- }
- }
-#endif /* CONFIG_PPC_PMAC */
-
- return 0;
-}
-
-static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise)
-{
- u16 ctl, adv;
-
- phy->autoneg = 1;
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = 0;
- phy->advertising = advertise;
-
- /* Setup standard advertise */
- adv = phy_read(phy, MII_ADVERTISE);
- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
- if (advertise & ADVERTISED_10baseT_Half)
- adv |= ADVERTISE_10HALF;
- if (advertise & ADVERTISED_10baseT_Full)
- adv |= ADVERTISE_10FULL;
- if (advertise & ADVERTISED_100baseT_Half)
- adv |= ADVERTISE_100HALF;
- if (advertise & ADVERTISED_100baseT_Full)
- adv |= ADVERTISE_100FULL;
- if (advertise & ADVERTISED_Pause)
- adv |= ADVERTISE_PAUSE_CAP;
- if (advertise & ADVERTISED_Asym_Pause)
- adv |= ADVERTISE_PAUSE_ASYM;
- phy_write(phy, MII_ADVERTISE, adv);
-
- /* Setup 1000BT advertise */
- adv = phy_read(phy, MII_1000BASETCONTROL);
- adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP|MII_1000BASETCONTROL_HALFDUPLEXCAP);
- if (advertise & SUPPORTED_1000baseT_Half)
- adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
- if (advertise & SUPPORTED_1000baseT_Full)
- adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
- phy_write(phy, MII_1000BASETCONTROL, adv);
-
- /* Start/Restart aneg */
- ctl = phy_read(phy, MII_BMCR);
- ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int bcm54xx_setup_forced(struct mii_phy *phy, int speed, int fd)
-{
- u16 ctl;
-
- phy->autoneg = 0;
- phy->speed = speed;
- phy->duplex = fd;
- phy->pause = 0;
-
- ctl = phy_read(phy, MII_BMCR);
- ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE);
-
- /* First reset the PHY */
- phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
-
- /* Select speed & duplex */
- switch(speed) {
- case SPEED_10:
- break;
- case SPEED_100:
- ctl |= BMCR_SPEED100;
- break;
- case SPEED_1000:
- ctl |= BMCR_SPD2;
- }
- if (fd == DUPLEX_FULL)
- ctl |= BMCR_FULLDPLX;
-
- // XXX Should we set the sungem to GII now on 1000BT ?
-
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int bcm54xx_read_link(struct mii_phy *phy)
-{
- int link_mode;
- u16 val;
-
- if (phy->autoneg) {
- val = phy_read(phy, MII_BCM5400_AUXSTATUS);
- link_mode = ((val & MII_BCM5400_AUXSTATUS_LINKMODE_MASK) >>
- MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT);
- phy->duplex = phy_BCM5400_link_table[link_mode][0] ?
- DUPLEX_FULL : DUPLEX_HALF;
- phy->speed = phy_BCM5400_link_table[link_mode][2] ?
- SPEED_1000 :
- (phy_BCM5400_link_table[link_mode][1] ?
- SPEED_100 : SPEED_10);
- val = phy_read(phy, MII_LPA);
- phy->pause = (phy->duplex == DUPLEX_FULL) &&
- ((val & LPA_PAUSE) != 0);
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-
-static int marvell88e1111_init(struct mii_phy* phy)
-{
- u16 rev;
-
- /* magic init sequence for rev 0 */
- rev = phy_read(phy, MII_PHYSID2) & 0x000f;
- if (rev == 0) {
- phy_write(phy, 0x1d, 0x000a);
- phy_write(phy, 0x1e, 0x0821);
-
- phy_write(phy, 0x1d, 0x0006);
- phy_write(phy, 0x1e, 0x8600);
-
- phy_write(phy, 0x1d, 0x000b);
- phy_write(phy, 0x1e, 0x0100);
-
- phy_write(phy, 0x1d, 0x0004);
- phy_write(phy, 0x1e, 0x4850);
- }
- return 0;
-}
-
-#define BCM5421_MODE_MASK (1 << 5)
-
-static int bcm5421_poll_link(struct mii_phy* phy)
-{
- u32 phy_reg;
- int mode;
-
- /* find out in what mode we are */
- phy_write(phy, MII_NCONFIG, 0x1000);
- phy_reg = phy_read(phy, MII_NCONFIG);
-
- mode = (phy_reg & BCM5421_MODE_MASK) >> 5;
-
- if ( mode == BCM54XX_COPPER)
- return genmii_poll_link(phy);
-
- /* try to find out wether we have a link */
- phy_write(phy, MII_NCONFIG, 0x2000);
- phy_reg = phy_read(phy, MII_NCONFIG);
-
- if (phy_reg & 0x0020)
- return 0;
- else
- return 1;
-}
-
-static int bcm5421_read_link(struct mii_phy* phy)
-{
- u32 phy_reg;
- int mode;
-
- /* find out in what mode we are */
- phy_write(phy, MII_NCONFIG, 0x1000);
- phy_reg = phy_read(phy, MII_NCONFIG);
-
- mode = (phy_reg & BCM5421_MODE_MASK ) >> 5;
-
- if ( mode == BCM54XX_COPPER)
- return bcm54xx_read_link(phy);
-
- phy->speed = SPEED_1000;
-
- /* find out wether we are running half- or full duplex */
- phy_write(phy, MII_NCONFIG, 0x2000);
- phy_reg = phy_read(phy, MII_NCONFIG);
-
- if ( (phy_reg & 0x0080) >> 7)
- phy->duplex |= DUPLEX_HALF;
- else
- phy->duplex |= DUPLEX_FULL;
-
- return 0;
-}
-
-static int bcm5421_enable_fiber(struct mii_phy* phy, int autoneg)
-{
- /* enable fiber mode */
- phy_write(phy, MII_NCONFIG, 0x9020);
- /* LEDs active in both modes, autosense prio = fiber */
- phy_write(phy, MII_NCONFIG, 0x945f);
-
- if (!autoneg) {
- /* switch off fibre autoneg */
- phy_write(phy, MII_NCONFIG, 0xfc01);
- phy_write(phy, 0x0b, 0x0004);
- }
-
- phy->autoneg = autoneg;
-
- return 0;
-}
-
-#define BCM5461_FIBER_LINK (1 << 2)
-#define BCM5461_MODE_MASK (3 << 1)
-
-static int bcm5461_poll_link(struct mii_phy* phy)
-{
- u32 phy_reg;
- int mode;
-
- /* find out in what mode we are */
- phy_write(phy, MII_NCONFIG, 0x7c00);
- phy_reg = phy_read(phy, MII_NCONFIG);
-
- mode = (phy_reg & BCM5461_MODE_MASK ) >> 1;
-
- if ( mode == BCM54XX_COPPER)
- return genmii_poll_link(phy);
-
- /* find out wether we have a link */
- phy_write(phy, MII_NCONFIG, 0x7000);
- phy_reg = phy_read(phy, MII_NCONFIG);
-
- if (phy_reg & BCM5461_FIBER_LINK)
- return 1;
- else
- return 0;
-}
-
-#define BCM5461_FIBER_DUPLEX (1 << 3)
-
-static int bcm5461_read_link(struct mii_phy* phy)
-{
- u32 phy_reg;
- int mode;
-
- /* find out in what mode we are */
- phy_write(phy, MII_NCONFIG, 0x7c00);
- phy_reg = phy_read(phy, MII_NCONFIG);
-
- mode = (phy_reg & BCM5461_MODE_MASK ) >> 1;
-
- if ( mode == BCM54XX_COPPER) {
- return bcm54xx_read_link(phy);
- }
-
- phy->speed = SPEED_1000;
-
- /* find out wether we are running half- or full duplex */
- phy_write(phy, MII_NCONFIG, 0x7000);
- phy_reg = phy_read(phy, MII_NCONFIG);
-
- if (phy_reg & BCM5461_FIBER_DUPLEX)
- phy->duplex |= DUPLEX_FULL;
- else
- phy->duplex |= DUPLEX_HALF;
-
- return 0;
-}
-
-static int bcm5461_enable_fiber(struct mii_phy* phy, int autoneg)
-{
- /* select fiber mode, enable 1000 base-X registers */
- phy_write(phy, MII_NCONFIG, 0xfc0b);
-
- if (autoneg) {
- /* enable fiber with no autonegotiation */
- phy_write(phy, MII_ADVERTISE, 0x01e0);
- phy_write(phy, MII_BMCR, 0x1140);
- } else {
- /* enable fiber with autonegotiation */
- phy_write(phy, MII_BMCR, 0x0140);
- }
-
- phy->autoneg = autoneg;
-
- return 0;
-}
-
-static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise)
-{
- u16 ctl, adv;
-
- phy->autoneg = 1;
- phy->speed = SPEED_10;
- phy->duplex = DUPLEX_HALF;
- phy->pause = 0;
- phy->advertising = advertise;
-
- /* Setup standard advertise */
- adv = phy_read(phy, MII_ADVERTISE);
- adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
- if (advertise & ADVERTISED_10baseT_Half)
- adv |= ADVERTISE_10HALF;
- if (advertise & ADVERTISED_10baseT_Full)
- adv |= ADVERTISE_10FULL;
- if (advertise & ADVERTISED_100baseT_Half)
- adv |= ADVERTISE_100HALF;
- if (advertise & ADVERTISED_100baseT_Full)
- adv |= ADVERTISE_100FULL;
- if (advertise & ADVERTISED_Pause)
- adv |= ADVERTISE_PAUSE_CAP;
- if (advertise & ADVERTISED_Asym_Pause)
- adv |= ADVERTISE_PAUSE_ASYM;
- phy_write(phy, MII_ADVERTISE, adv);
-
- /* Setup 1000BT advertise & enable crossover detect
- * XXX How do we advertise 1000BT ? Darwin source is
- * confusing here, they read from specific control and
- * write to control... Someone has specs for those
- * beasts ?
- */
- adv = phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
- adv |= MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX;
- adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
- MII_1000BASETCONTROL_HALFDUPLEXCAP);
- if (advertise & SUPPORTED_1000baseT_Half)
- adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
- if (advertise & SUPPORTED_1000baseT_Full)
- adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
- phy_write(phy, MII_1000BASETCONTROL, adv);
-
- /* Start/Restart aneg */
- ctl = phy_read(phy, MII_BMCR);
- ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int marvell_setup_forced(struct mii_phy *phy, int speed, int fd)
-{
- u16 ctl, ctl2;
-
- phy->autoneg = 0;
- phy->speed = speed;
- phy->duplex = fd;
- phy->pause = 0;
-
- ctl = phy_read(phy, MII_BMCR);
- ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_SPD2|BMCR_ANENABLE);
- ctl |= BMCR_RESET;
-
- /* Select speed & duplex */
- switch(speed) {
- case SPEED_10:
- break;
- case SPEED_100:
- ctl |= BMCR_SPEED100;
- break;
- /* I'm not sure about the one below, again, Darwin source is
- * quite confusing and I lack chip specs
- */
- case SPEED_1000:
- ctl |= BMCR_SPD2;
- }
- if (fd == DUPLEX_FULL)
- ctl |= BMCR_FULLDPLX;
-
- /* Disable crossover. Again, the way Apple does it is strange,
- * though I don't assume they are wrong ;)
- */
- ctl2 = phy_read(phy, MII_M1011_PHY_SPEC_CONTROL);
- ctl2 &= ~(MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX |
- MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX |
- MII_1000BASETCONTROL_FULLDUPLEXCAP |
- MII_1000BASETCONTROL_HALFDUPLEXCAP);
- if (speed == SPEED_1000)
- ctl2 |= (fd == DUPLEX_FULL) ?
- MII_1000BASETCONTROL_FULLDUPLEXCAP :
- MII_1000BASETCONTROL_HALFDUPLEXCAP;
- phy_write(phy, MII_1000BASETCONTROL, ctl2);
-
- // XXX Should we set the sungem to GII now on 1000BT ?
-
- phy_write(phy, MII_BMCR, ctl);
-
- return 0;
-}
-
-static int marvell_read_link(struct mii_phy *phy)
-{
- u16 status, pmask;
-
- if (phy->autoneg) {
- status = phy_read(phy, MII_M1011_PHY_SPEC_STATUS);
- if ((status & MII_M1011_PHY_SPEC_STATUS_RESOLVED) == 0)
- return -EAGAIN;
- if (status & MII_M1011_PHY_SPEC_STATUS_1000)
- phy->speed = SPEED_1000;
- else if (status & MII_M1011_PHY_SPEC_STATUS_100)
- phy->speed = SPEED_100;
- else
- phy->speed = SPEED_10;
- if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
- phy->duplex = DUPLEX_FULL;
- else
- phy->duplex = DUPLEX_HALF;
- pmask = MII_M1011_PHY_SPEC_STATUS_TX_PAUSE |
- MII_M1011_PHY_SPEC_STATUS_RX_PAUSE;
- phy->pause = (status & pmask) == pmask;
- }
- /* On non-aneg, we assume what we put in BMCR is the speed,
- * though magic-aneg shouldn't prevent this case from occurring
- */
-
- return 0;
-}
-
-#define MII_BASIC_FEATURES \
- (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
- SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | \
- SUPPORTED_Pause)
-
-/* On gigabit capable PHYs, we advertise Pause support but not asym pause
- * support for now as I'm not sure it's supported and Darwin doesn't do
- * it neither. --BenH.
- */
-#define MII_GBIT_FEATURES \
- (MII_BASIC_FEATURES | \
- SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
-
-/* Broadcom BCM 5201 */
-static struct mii_phy_ops bcm5201_phy_ops = {
- .init = bcm5201_init,
- .suspend = bcm5201_suspend,
- .setup_aneg = genmii_setup_aneg,
- .setup_forced = genmii_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = genmii_read_link,
-};
-
-static struct mii_phy_def bcm5201_phy_def = {
- .phy_id = 0x00406210,
- .phy_id_mask = 0xfffffff0,
- .name = "BCM5201",
- .features = MII_BASIC_FEATURES,
- .magic_aneg = 1,
- .ops = &bcm5201_phy_ops
-};
-
-/* Broadcom BCM 5221 */
-static struct mii_phy_ops bcm5221_phy_ops = {
- .suspend = bcm5221_suspend,
- .init = bcm5221_init,
- .setup_aneg = genmii_setup_aneg,
- .setup_forced = genmii_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = genmii_read_link,
-};
-
-static struct mii_phy_def bcm5221_phy_def = {
- .phy_id = 0x004061e0,
- .phy_id_mask = 0xfffffff0,
- .name = "BCM5221",
- .features = MII_BASIC_FEATURES,
- .magic_aneg = 1,
- .ops = &bcm5221_phy_ops
-};
-
-/* Broadcom BCM 5241 */
-static struct mii_phy_ops bcm5241_phy_ops = {
- .suspend = bcm5241_suspend,
- .init = bcm5241_init,
- .setup_aneg = genmii_setup_aneg,
- .setup_forced = genmii_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = genmii_read_link,
-};
-static struct mii_phy_def bcm5241_phy_def = {
- .phy_id = 0x0143bc30,
- .phy_id_mask = 0xfffffff0,
- .name = "BCM5241",
- .features = MII_BASIC_FEATURES,
- .magic_aneg = 1,
- .ops = &bcm5241_phy_ops
-};
-
-/* Broadcom BCM 5400 */
-static struct mii_phy_ops bcm5400_phy_ops = {
- .init = bcm5400_init,
- .suspend = bcm5400_suspend,
- .setup_aneg = bcm54xx_setup_aneg,
- .setup_forced = bcm54xx_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = bcm54xx_read_link,
-};
-
-static struct mii_phy_def bcm5400_phy_def = {
- .phy_id = 0x00206040,
- .phy_id_mask = 0xfffffff0,
- .name = "BCM5400",
- .features = MII_GBIT_FEATURES,
- .magic_aneg = 1,
- .ops = &bcm5400_phy_ops
-};
-
-/* Broadcom BCM 5401 */
-static struct mii_phy_ops bcm5401_phy_ops = {
- .init = bcm5401_init,
- .suspend = bcm5401_suspend,
- .setup_aneg = bcm54xx_setup_aneg,
- .setup_forced = bcm54xx_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = bcm54xx_read_link,
-};
-
-static struct mii_phy_def bcm5401_phy_def = {
- .phy_id = 0x00206050,
- .phy_id_mask = 0xfffffff0,
- .name = "BCM5401",
- .features = MII_GBIT_FEATURES,
- .magic_aneg = 1,
- .ops = &bcm5401_phy_ops
-};
-
-/* Broadcom BCM 5411 */
-static struct mii_phy_ops bcm5411_phy_ops = {
- .init = bcm5411_init,
- .suspend = generic_suspend,
- .setup_aneg = bcm54xx_setup_aneg,
- .setup_forced = bcm54xx_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = bcm54xx_read_link,
-};
-
-static struct mii_phy_def bcm5411_phy_def = {
- .phy_id = 0x00206070,
- .phy_id_mask = 0xfffffff0,
- .name = "BCM5411",
- .features = MII_GBIT_FEATURES,
- .magic_aneg = 1,
- .ops = &bcm5411_phy_ops
-};
-
-/* Broadcom BCM 5421 */
-static struct mii_phy_ops bcm5421_phy_ops = {
- .init = bcm5421_init,
- .suspend = generic_suspend,
- .setup_aneg = bcm54xx_setup_aneg,
- .setup_forced = bcm54xx_setup_forced,
- .poll_link = bcm5421_poll_link,
- .read_link = bcm5421_read_link,
- .enable_fiber = bcm5421_enable_fiber,
-};
-
-static struct mii_phy_def bcm5421_phy_def = {
- .phy_id = 0x002060e0,
- .phy_id_mask = 0xfffffff0,
- .name = "BCM5421",
- .features = MII_GBIT_FEATURES,
- .magic_aneg = 1,
- .ops = &bcm5421_phy_ops
-};
-
-/* Broadcom BCM 5421 built-in K2 */
-static struct mii_phy_ops bcm5421k2_phy_ops = {
- .init = bcm5421_init,
- .suspend = generic_suspend,
- .setup_aneg = bcm54xx_setup_aneg,
- .setup_forced = bcm54xx_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = bcm54xx_read_link,
-};
-
-static struct mii_phy_def bcm5421k2_phy_def = {
- .phy_id = 0x002062e0,
- .phy_id_mask = 0xfffffff0,
- .name = "BCM5421-K2",
- .features = MII_GBIT_FEATURES,
- .magic_aneg = 1,
- .ops = &bcm5421k2_phy_ops
-};
-
-static struct mii_phy_ops bcm5461_phy_ops = {
- .init = bcm5421_init,
- .suspend = generic_suspend,
- .setup_aneg = bcm54xx_setup_aneg,
- .setup_forced = bcm54xx_setup_forced,
- .poll_link = bcm5461_poll_link,
- .read_link = bcm5461_read_link,
- .enable_fiber = bcm5461_enable_fiber,
-};
-
-static struct mii_phy_def bcm5461_phy_def = {
- .phy_id = 0x002060c0,
- .phy_id_mask = 0xfffffff0,
- .name = "BCM5461",
- .features = MII_GBIT_FEATURES,
- .magic_aneg = 1,
- .ops = &bcm5461_phy_ops
-};
-
-/* Broadcom BCM 5462 built-in Vesta */
-static struct mii_phy_ops bcm5462V_phy_ops = {
- .init = bcm5421_init,
- .suspend = generic_suspend,
- .setup_aneg = bcm54xx_setup_aneg,
- .setup_forced = bcm54xx_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = bcm54xx_read_link,
-};
-
-static struct mii_phy_def bcm5462V_phy_def = {
- .phy_id = 0x002060d0,
- .phy_id_mask = 0xfffffff0,
- .name = "BCM5462-Vesta",
- .features = MII_GBIT_FEATURES,
- .magic_aneg = 1,
- .ops = &bcm5462V_phy_ops
-};
-
-/* Marvell 88E1101 amd 88E1111 */
-static struct mii_phy_ops marvell88e1101_phy_ops = {
- .suspend = generic_suspend,
- .setup_aneg = marvell_setup_aneg,
- .setup_forced = marvell_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = marvell_read_link
-};
-
-static struct mii_phy_ops marvell88e1111_phy_ops = {
- .init = marvell88e1111_init,
- .suspend = generic_suspend,
- .setup_aneg = marvell_setup_aneg,
- .setup_forced = marvell_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = marvell_read_link
-};
-
-/* two revs in darwin for the 88e1101 ... I could use a datasheet
- * to get the proper names...
- */
-static struct mii_phy_def marvell88e1101v1_phy_def = {
- .phy_id = 0x01410c20,
- .phy_id_mask = 0xfffffff0,
- .name = "Marvell 88E1101v1",
- .features = MII_GBIT_FEATURES,
- .magic_aneg = 1,
- .ops = &marvell88e1101_phy_ops
-};
-static struct mii_phy_def marvell88e1101v2_phy_def = {
- .phy_id = 0x01410c60,
- .phy_id_mask = 0xfffffff0,
- .name = "Marvell 88E1101v2",
- .features = MII_GBIT_FEATURES,
- .magic_aneg = 1,
- .ops = &marvell88e1101_phy_ops
-};
-static struct mii_phy_def marvell88e1111_phy_def = {
- .phy_id = 0x01410cc0,
- .phy_id_mask = 0xfffffff0,
- .name = "Marvell 88E1111",
- .features = MII_GBIT_FEATURES,
- .magic_aneg = 1,
- .ops = &marvell88e1111_phy_ops
-};
-
-/* Generic implementation for most 10/100 PHYs */
-static struct mii_phy_ops generic_phy_ops = {
- .setup_aneg = genmii_setup_aneg,
- .setup_forced = genmii_setup_forced,
- .poll_link = genmii_poll_link,
- .read_link = genmii_read_link
-};
-
-static struct mii_phy_def genmii_phy_def = {
- .phy_id = 0x00000000,
- .phy_id_mask = 0x00000000,
- .name = "Generic MII",
- .features = MII_BASIC_FEATURES,
- .magic_aneg = 0,
- .ops = &generic_phy_ops
-};
-
-static struct mii_phy_def* mii_phy_table[] = {
- &bcm5201_phy_def,
- &bcm5221_phy_def,
- &bcm5241_phy_def,
- &bcm5400_phy_def,
- &bcm5401_phy_def,
- &bcm5411_phy_def,
- &bcm5421_phy_def,
- &bcm5421k2_phy_def,
- &bcm5461_phy_def,
- &bcm5462V_phy_def,
- &marvell88e1101v1_phy_def,
- &marvell88e1101v2_phy_def,
- &marvell88e1111_phy_def,
- &genmii_phy_def,
- NULL
-};
-
-int mii_phy_probe(struct mii_phy *phy, int mii_id)
-{
- int rc;
- u32 id;
- struct mii_phy_def* def;
- int i;
-
- /* We do not reset the mii_phy structure as the driver
- * may re-probe the PHY regulary
- */
- phy->mii_id = mii_id;
-
- /* Take PHY out of isloate mode and reset it. */
- rc = reset_one_mii_phy(phy, mii_id);
- if (rc)
- goto fail;
-
- /* Read ID and find matching entry */
- id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2));
- printk(KERN_DEBUG KBUILD_MODNAME ": " "PHY ID: %x, addr: %x\n",
- id, mii_id);
- for (i=0; (def = mii_phy_table[i]) != NULL; i++)
- if ((id & def->phy_id_mask) == def->phy_id)
- break;
- /* Should never be NULL (we have a generic entry), but... */
- if (def == NULL)
- goto fail;
-
- phy->def = def;
-
- return 0;
-fail:
- phy->speed = 0;
- phy->duplex = 0;
- phy->pause = 0;
- phy->advertising = 0;
- return -ENODEV;
-}
-
-EXPORT_SYMBOL(mii_phy_probe);
-MODULE_LICENSE("GPL");
-