Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

 1) Get rid of the error prone NLA_PUT*() macros that used an embedded
    goto.

 2) Kill off the token-ring and MCA networking drivers, from Paul
    Gortmaker.

 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from
    Eric Dumazet.

 4) Add PTP hardware clock support to IGB and IXGBE, from Richard
    Cochran and Jacob Keller.

 5) Allow users to query timestamping capabilities of a card via
    ethtool, from Richard Cochran.

 6) Add loadbalance mode to the teaming driver, from Jiri Pirko.  Part
    of this is that we can now have BPF filters not attached to sockets,
    and the loadbalancing function is calculated using one.

 7) Francois Romieu went through the network drivers removing gratuitous
    uses of netdev->base_addr, perhaps some day we can remove it
    completely but it's used for ISA probing still.

 8) Add a BPF JIT for sparc.  I know, who cares, right? :-)

 9) Move networking sysctl registry away from using the compatability
    mode interfaces in the sysctl code.  From Eric W Biederman.

10) Pavel Emelyanov added a way to save and restore TCP socket state via
    TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as
    well as a way to forcefully bind a socket to a port via the
    sk->sk_reuse value SK_FORCE_REUSE.  There is also a
    TCP_REPAIR_OPTIONS which allows to reinstante the TCP options
    enabled on the connection.

11) Several enhancements from Eric Dumazet that, in particular, can
    enhance splice performance on TCP sockets significantly.

     a) Reset the offset of the per-socket sendmsg page when we know
        we're the only use of the page in linear_to_page().

     b) Add facilities such that skb->data can be backed a page rather
        than SLAB kmalloc'd memory.  In particular devices which were
        receiving into linear RX buffers can now end up providing paged
        data.

    The big result is that code like splice and GRO do not have to copy
    any more.

12) Allow a pure sender to more gracefully handle ACK backlogs in TCP.
    What can happen at high rates is that the sender hasn't grown his
    receive buffer limits at all (he's not receiving data so really
    doesn't need to), but the non-data ACKs consume receive buffer
    space.

    sk_add_backlog() is too aggressive in dropping frames in this case,
    so relax it's requirements by using the receive buffer plus the send
    buffer limit as the backlog limit instead of just the former.

    Also from Eric Dumazet.

13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and
    Chris Elston.

14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng.
    Basically, we can start fast retransmit before hiting the dupack
    threshold under certain conditions.

15) New CODEL active queue management packet scheduler, from Eric
    Dumazet based upon initial work by Dave Taht.

    Basically, the big feature is that packets are dropped (or ECN bits
    are set) based upon how long packets live in the queue, rather than
    the queue length (which is what RED uses).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits)
  drivers/net/stmmac: seq_file fix memory leak
  ipv6/exthdrs: strict Pad1 and PadN check
  USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
  USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z
  USB: qmi_wwan: Make forced int 4 whitelist generic
  net/ipv4: replace simple_strtoul with kstrtoul
  net/ipv4/ipconfig: neaten __setup placement
  net: qmi_wwan: Add Vodafone/Huawei K5005 support
  net: cdc_ether: Add ZTE WWAN matches before generic Ethernet
  ipv6: use skb coalescing in reassembly
  ipv4: use skb coalescing in defragmentation
  net: introduce skb_try_coalesce()
  net:ipv6:fixed space issues relating to operators.
  net:ipv6:fixed a trailing white space issue.
  ipv6: disable GSO on sockets hitting dst_allfrag
  tg3: use netdev_alloc_frag() API
  net: napi_frags_skb() is static
  ppp: avoid false drop_monitor false positives
  ipv6: bool/const conversions phase2
  ipx: Remove spurious NULL checking in ipx_ioctl().
  ...

1 files changed, 0 insertions, 321 deletions

diff --git a/drivers/net/tokenring/olympic.h b/drivers/net/tokenring/olympic.h
deleted file mode 100644
index 30631ba..0000000
--- a/drivers/net/tokenring/olympic.h
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- *  olympic.h (c) 1999 Peter De Schrijver All Rights Reserved
- *                1999,2000 Mike Phillips (mikep@linuxtr.net)
- *
- *  Linux driver for IBM PCI tokenring cards based on the olympic and the PIT/PHY chipset.
- *
- *  Base Driver Skeleton:
- *      Written 1993-94 by Donald Becker.
- *
- *      Copyright 1993 United States Government as represented by the
- *      Director, National Security Agency.
- *
- *  This software may be used and distributed according to the terms
- *  of the GNU General Public License, incorporated herein by reference.
- */
-
-#define CID 0x4e
-
-#define BCTL 0x70
-#define BCTL_SOFTRESET (1<<15)
-#define BCTL_MIMREB (1<<6)
-#define BCTL_MODE_INDICATOR (1<<5)
-
-#define GPR 0x4a
-#define GPR_OPTI_BF (1<<6)
-#define GPR_NEPTUNE_BF (1<<4) 
-#define GPR_AUTOSENSE (1<<2)
-#define GPR_16MBPS (1<<3) 
-
-#define PAG 0x85
-#define LBC 0x8e
-
-#define LISR 0x10
-#define LISR_SUM 0x14
-#define LISR_RWM 0x18
-
-#define LISR_LIE (1<<15)
-#define LISR_SLIM (1<<13)
-#define LISR_SLI (1<<12)
-#define LISR_PCMSRMASK (1<<11)
-#define LISR_PCMSRINT (1<<10)
-#define LISR_WOLMASK (1<<9)
-#define LISR_WOL (1<<8)
-#define LISR_SRB_CMD (1<<5)
-#define LISR_ASB_REPLY (1<<4)
-#define LISR_ASB_FREE_REQ (1<<2)
-#define LISR_ARB_FREE (1<<1)
-#define LISR_TRB_FRAME (1<<0)
-
-#define SISR 0x20
-#define SISR_SUM 0x24
-#define SISR_RWM 0x28
-#define SISR_RR 0x2C
-#define SISR_RESMASK 0x30
-#define SISR_MASK 0x54
-#define SISR_MASK_SUM 0x58
-#define SISR_MASK_RWM 0x5C
-
-#define SISR_TX2_IDLE (1<<31)
-#define SISR_TX2_HALT (1<<29)
-#define SISR_TX2_EOF (1<<28)
-#define SISR_TX1_IDLE (1<<27)
-#define SISR_TX1_HALT (1<<25)
-#define SISR_TX1_EOF (1<<24)
-#define SISR_TIMEOUT (1<<23)
-#define SISR_RX_NOBUF (1<<22)
-#define SISR_RX_STATUS (1<<21)
-#define SISR_RX_HALT (1<<18)
-#define SISR_RX_EOF_EARLY (1<<16)
-#define SISR_MI (1<<15)
-#define SISR_PI (1<<13)
-#define SISR_ERR (1<<9)
-#define SISR_ADAPTER_CHECK (1<<6)
-#define SISR_SRB_REPLY (1<<5)
-#define SISR_ASB_FREE (1<<4)
-#define SISR_ARB_CMD (1<<3)
-#define SISR_TRB_REPLY (1<<2)
-
-#define EISR 0x34
-#define EISR_RWM 0x38
-#define EISR_MASK 0x3c
-#define EISR_MASK_OPTIONS 0x001FFF7F
-
-#define LAPA 0x60
-#define LAPWWO 0x64
-#define LAPWWC 0x68
-#define LAPCTL 0x6C
-#define LAIPD 0x78
-#define LAIPDDINC 0x7C
-
-#define TIMER 0x50
-
-#define CLKCTL 0x74
-#define CLKCTL_PAUSE (1<<15) 
-
-#define PM_CON 0x4
-
-#define BMCTL_SUM 0x40
-#define BMCTL_RWM 0x44
-#define BMCTL_TX2_DIS (1<<30) 
-#define BMCTL_TX1_DIS (1<<26) 
-#define BMCTL_RX_DIS (1<<22) 
-
-#define BMASR 0xcc
-
-#define RXDESCQ 0x90
-#define RXDESCQCNT 0x94
-#define RXCDA 0x98
-#define RXENQ 0x9C
-#define RXSTATQ 0xA0
-#define RXSTATQCNT 0xA4
-#define RXCSA 0xA8
-#define RXCLEN 0xAC
-#define RXHLEN 0xAE
-
-#define TXDESCQ_1 0xb0
-#define TXDESCQ_2 0xd0
-#define TXDESCQCNT_1 0xb4
-#define TXDESCQCNT_2 0xd4
-#define TXCDA_1 0xb8
-#define TXCDA_2 0xd8
-#define TXENQ_1 0xbc
-#define TXENQ_2 0xdc
-#define TXSTATQ_1 0xc0
-#define TXSTATQ_2 0xe0
-#define TXSTATQCNT_1 0xc4
-#define TXSTATQCNT_2 0xe4
-#define TXCSA_1 0xc8
-#define TXCSA_2 0xe8
-/* Cardbus */
-#define FERMASK 0xf4
-#define FERMASK_INT_BIT (1<<15)
-
-#define OLYMPIC_IO_SPACE 256
-
-#define SRB_COMMAND_SIZE 50
-
-#define OLYMPIC_MAX_ADAPTERS 8 /* 0x08 __MODULE_STRING can't hand 0xnn */
-
-/* Defines for LAN STATUS CHANGE reports */
-#define LSC_SIG_LOSS 0x8000
-#define LSC_HARD_ERR 0x4000
-#define LSC_SOFT_ERR 0x2000
-#define LSC_TRAN_BCN 0x1000
-#define LSC_LWF      0x0800
-#define LSC_ARW      0x0400
-#define LSC_FPE      0x0200
-#define LSC_RR       0x0100
-#define LSC_CO       0x0080
-#define LSC_SS       0x0040
-#define LSC_RING_REC 0x0020
-#define LSC_SR_CO    0x0010
-#define LSC_FDX_MODE 0x0004
-
-/* Defines for OPEN ADAPTER command */
-
-#define OPEN_ADAPTER_EXT_WRAP (1<<15)
-#define OPEN_ADAPTER_DIS_HARDEE (1<<14)
-#define OPEN_ADAPTER_DIS_SOFTERR (1<<13)
-#define OPEN_ADAPTER_PASS_ADC_MAC (1<<12)
-#define OPEN_ADAPTER_PASS_ATT_MAC (1<<11)
-#define OPEN_ADAPTER_ENABLE_EC (1<<10)
-#define OPEN_ADAPTER_CONTENDER (1<<8)
-#define OPEN_ADAPTER_PASS_BEACON (1<<7)
-#define OPEN_ADAPTER_ENABLE_FDX (1<<6)
-#define OPEN_ADAPTER_ENABLE_RPL (1<<5)
-#define OPEN_ADAPTER_INHIBIT_ETR (1<<4)
-#define OPEN_ADAPTER_INTERNAL_WRAP (1<<3)
-#define OPEN_ADAPTER_USE_OPTS2 (1<<0)
-
-#define OPEN_ADAPTER_2_ENABLE_ONNOW (1<<15)
-
-/* Defines for SRB Commands */
-
-#define SRB_ACCESS_REGISTER 0x1f
-#define SRB_CLOSE_ADAPTER 0x04
-#define SRB_CONFIGURE_BRIDGE 0x0c
-#define SRB_CONFIGURE_WAKEUP_EVENT 0x1a
-#define SRB_MODIFY_BRIDGE_PARMS 0x15
-#define SRB_MODIFY_OPEN_OPTIONS 0x01
-#define SRB_MODIFY_RECEIVE_OPTIONS 0x17
-#define SRB_NO_OPERATION 0x00
-#define SRB_OPEN_ADAPTER 0x03
-#define SRB_READ_LOG 0x08
-#define SRB_READ_SR_COUNTERS 0x16
-#define SRB_RESET_GROUP_ADDRESS 0x02
-#define SRB_SAVE_CONFIGURATION 0x1b
-#define SRB_SET_BRIDGE_PARMS 0x09
-#define SRB_SET_BRIDGE_TARGETS 0x10
-#define SRB_SET_FUNC_ADDRESS 0x07
-#define SRB_SET_GROUP_ADDRESS 0x06
-#define SRB_SET_GROUP_ADDR_OPTIONS 0x11
-#define SRB_UPDATE_WAKEUP_PATTERN 0x19
-
-/* Clear return code */
-
-#define OLYMPIC_CLEAR_RET_CODE 0xfe 
-
-/* ARB Commands */
-#define ARB_RECEIVE_DATA 0x81
-#define ARB_LAN_CHANGE_STATUS 0x84
-/* ASB Response commands */
-
-#define ASB_RECEIVE_DATA 0x81
-
-
-/* Olympic defaults for buffers */
- 
-#define OLYMPIC_RX_RING_SIZE 16 /* should be a power of 2 */
-#define OLYMPIC_TX_RING_SIZE 8 /* should be a power of 2 */
-
-#define PKT_BUF_SZ 4096 /* Default packet size */
-
-/* Olympic data structures */
-
-/* xxxx These structures are all little endian in hardware. */
-
-struct olympic_tx_desc {
-	__le32 buffer;
-	__le32 status_length;
-};
-
-struct olympic_tx_status {
-	__le32 status;
-};
-
-struct olympic_rx_desc {
-	__le32 buffer;
-	__le32 res_length; 
-};
-
-struct olympic_rx_status {
-	__le32 fragmentcnt_framelen;
-	__le32 status_buffercnt;
-};
-/* xxxx END These structures are all little endian in hardware. */
-/* xxxx There may be more, but I'm pretty sure about these */
-
-struct mac_receive_buffer {
-	__le16 next ; 
-	u8 padding ; 
-	u8 frame_status ;
-	__le16 buffer_length ; 
-	u8 frame_data ; 
-};
-
-struct olympic_private {
-	
-	u16 srb;      /* be16 */
-	u16 trb;      /* be16 */
-	u16 arb;      /* be16 */
-	u16 asb;      /* be16 */
-
-	u8 __iomem *olympic_mmio;
-	u8 __iomem *olympic_lap;
-	struct pci_dev *pdev ; 
-	const char *olympic_card_name;
-
-	spinlock_t olympic_lock ; 
-
-	volatile int srb_queued;    /* True if an SRB is still posted */	
-	wait_queue_head_t srb_wait;
-
-	volatile int asb_queued;    /* True if an ASB is posted */
-
-	volatile int trb_queued;   /* True if a TRB is posted */
-	wait_queue_head_t trb_wait ; 
-
-	/* These must be on a 4 byte boundary. */
-	struct olympic_rx_desc olympic_rx_ring[OLYMPIC_RX_RING_SIZE];
-	struct olympic_tx_desc olympic_tx_ring[OLYMPIC_TX_RING_SIZE];
-	struct olympic_rx_status olympic_rx_status_ring[OLYMPIC_RX_RING_SIZE];	
-	struct olympic_tx_status olympic_tx_status_ring[OLYMPIC_TX_RING_SIZE];	
-
-	struct sk_buff *tx_ring_skb[OLYMPIC_TX_RING_SIZE], *rx_ring_skb[OLYMPIC_RX_RING_SIZE];	
-	int tx_ring_free, tx_ring_last_status, rx_ring_last_received,rx_status_last_received, free_tx_ring_entries;
-
-	u16 olympic_lan_status ;
-	u8 olympic_ring_speed ;
-	u16 pkt_buf_sz ; 
-	u8 olympic_receive_options, olympic_copy_all_options,olympic_message_level, olympic_network_monitor;  
-	u16 olympic_addr_table_addr, olympic_parms_addr ; 
-	u8 olympic_laa[6] ; 
-	u32 rx_ring_dma_addr;
-	u32 rx_status_ring_dma_addr;
-	u32 tx_ring_dma_addr;
-	u32 tx_status_ring_dma_addr;
-};
-
-struct olympic_adapter_addr_table {
-
-	u8 node_addr[6] ; 
-	u8 reserved[4] ; 
-	u8 func_addr[4] ; 
-} ; 
-
-struct olympic_parameters_table { 
-	
-	u8  phys_addr[4] ; 
-	u8  up_node_addr[6] ; 
-	u8  up_phys_addr[4] ; 
-	u8  poll_addr[6] ; 
-	u16 reserved ; 
-	u16 acc_priority ; 
-	u16 auth_source_class ; 
-	u16 att_code ; 
-	u8  source_addr[6] ; 
-	u16 beacon_type ; 
-	u16 major_vector ; 
-	u16 lan_status ; 
-	u16 soft_error_time ; 
- 	u16 reserved1 ; 
-	u16 local_ring ; 
-	u16 mon_error ; 
-	u16 beacon_transmit ; 
-	u16 beacon_receive ; 
-	u16 frame_correl ; 
-	u8  beacon_naun[6] ; 
-	u32 reserved2 ; 
-	u8  beacon_phys[4] ; 	
-};