Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking changes from David Miller:

 1) Get rid of the error prone NLA_PUT*() macros that used an embedded
    goto.

 2) Kill off the token-ring and MCA networking drivers, from Paul
    Gortmaker.

 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from
    Eric Dumazet.

 4) Add PTP hardware clock support to IGB and IXGBE, from Richard
    Cochran and Jacob Keller.

 5) Allow users to query timestamping capabilities of a card via
    ethtool, from Richard Cochran.

 6) Add loadbalance mode to the teaming driver, from Jiri Pirko.  Part
    of this is that we can now have BPF filters not attached to sockets,
    and the loadbalancing function is calculated using one.

 7) Francois Romieu went through the network drivers removing gratuitous
    uses of netdev->base_addr, perhaps some day we can remove it
    completely but it's used for ISA probing still.

 8) Add a BPF JIT for sparc.  I know, who cares, right? :-)

 9) Move networking sysctl registry away from using the compatability
    mode interfaces in the sysctl code.  From Eric W Biederman.

10) Pavel Emelyanov added a way to save and restore TCP socket state via
    TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as
    well as a way to forcefully bind a socket to a port via the
    sk->sk_reuse value SK_FORCE_REUSE.  There is also a
    TCP_REPAIR_OPTIONS which allows to reinstante the TCP options
    enabled on the connection.

11) Several enhancements from Eric Dumazet that, in particular, can
    enhance splice performance on TCP sockets significantly.

     a) Reset the offset of the per-socket sendmsg page when we know
        we're the only use of the page in linear_to_page().

     b) Add facilities such that skb->data can be backed a page rather
        than SLAB kmalloc'd memory.  In particular devices which were
        receiving into linear RX buffers can now end up providing paged
        data.

    The big result is that code like splice and GRO do not have to copy
    any more.

12) Allow a pure sender to more gracefully handle ACK backlogs in TCP.
    What can happen at high rates is that the sender hasn't grown his
    receive buffer limits at all (he's not receiving data so really
    doesn't need to), but the non-data ACKs consume receive buffer
    space.

    sk_add_backlog() is too aggressive in dropping frames in this case,
    so relax it's requirements by using the receive buffer plus the send
    buffer limit as the backlog limit instead of just the former.

    Also from Eric Dumazet.

13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and
    Chris Elston.

14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng.
    Basically, we can start fast retransmit before hiting the dupack
    threshold under certain conditions.

15) New CODEL active queue management packet scheduler, from Eric
    Dumazet based upon initial work by Dave Taht.

    Basically, the big feature is that packets are dropped (or ECN bits
    are set) based upon how long packets live in the queue, rather than
    the queue length (which is what RED uses).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits)
  drivers/net/stmmac: seq_file fix memory leak
  ipv6/exthdrs: strict Pad1 and PadN check
  USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
  USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z
  USB: qmi_wwan: Make forced int 4 whitelist generic
  net/ipv4: replace simple_strtoul with kstrtoul
  net/ipv4/ipconfig: neaten __setup placement
  net: qmi_wwan: Add Vodafone/Huawei K5005 support
  net: cdc_ether: Add ZTE WWAN matches before generic Ethernet
  ipv6: use skb coalescing in reassembly
  ipv4: use skb coalescing in defragmentation
  net: introduce skb_try_coalesce()
  net:ipv6:fixed space issues relating to operators.
  net:ipv6:fixed a trailing white space issue.
  ipv6: disable GSO on sockets hitting dst_allfrag
  tg3: use netdev_alloc_frag() API
  net: napi_frags_skb() is static
  ppp: avoid false drop_monitor false positives
  ipv6: bool/const conversions phase2
  ipx: Remove spurious NULL checking in ipx_ioctl().
  ...

1 files changed, 128 insertions, 69 deletions

diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index f4d28c3..e1eac83 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -117,21 +117,18 @@ static const struct {
 	u32 intf;
 	enum p54u_hw_type type;
 	const char *fw;
-	const char *fw_legacy;
 	char hw[20];
 } p54u_fwlist[__NUM_P54U_HWTYPES] = {
 	{
 		.type = P54U_NET2280,
 		.intf = FW_LM86,
 		.fw = "isl3886usb",
-		.fw_legacy = "isl3890usb",
 		.hw = "ISL3886 + net2280",
 	},
 	{
 		.type = P54U_3887,
 		.intf = FW_LM87,
 		.fw = "isl3887usb",
-		.fw_legacy = "isl3887usb_bare",
 		.hw = "ISL3887",
 	},
 };
@@ -208,6 +205,16 @@ static void p54u_free_urbs(struct ieee80211_hw *dev)
 	usb_kill_anchored_urbs(&priv->submitted);
 }
 
+static void p54u_stop(struct ieee80211_hw *dev)
+{
+	/*
+	 * TODO: figure out how to reliably stop the 3887 and net2280 so
+	 * the hardware is still usable next time we want to start it.
+	 * until then, we just stop listening to the hardware..
+	 */
+	p54u_free_urbs(dev);
+}
+
 static int p54u_init_urbs(struct ieee80211_hw *dev)
 {
 	struct p54u_priv *priv = dev->priv;
@@ -257,6 +264,16 @@ static int p54u_init_urbs(struct ieee80211_hw *dev)
 	return ret;
 }
 
+static int p54u_open(struct ieee80211_hw *dev)
+{
+	/*
+	 * TODO: Because we don't know how to reliably stop the 3887 and
+	 * the isl3886+net2280, other than brutally cut off all
+	 * communications. We have to reinitialize the urbs on every start.
+	 */
+	return p54u_init_urbs(dev);
+}
+
 static __le32 p54u_lm87_chksum(const __le32 *data, size_t length)
 {
 	u32 chk = 0;
@@ -836,70 +853,137 @@ fail:
 	return err;
 }
 
-static int p54u_load_firmware(struct ieee80211_hw *dev)
+static int p54_find_type(struct p54u_priv *priv)
 {
-	struct p54u_priv *priv = dev->priv;
-	int err, i;
-
-	BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES);
+	int i;
 
 	for (i = 0; i < __NUM_P54U_HWTYPES; i++)
 		if (p54u_fwlist[i].type == priv->hw_type)
 			break;
-
 	if (i == __NUM_P54U_HWTYPES)
 		return -EOPNOTSUPP;
 
-	err = request_firmware(&priv->fw, p54u_fwlist[i].fw, &priv->udev->dev);
-	if (err) {
-		dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
-					  "(%d)!\n", p54u_fwlist[i].fw, err);
+	return i;
+}
 
-		err = request_firmware(&priv->fw, p54u_fwlist[i].fw_legacy,
-				       &priv->udev->dev);
-		if (err)
-			return err;
-	}
+static int p54u_start_ops(struct p54u_priv *priv)
+{
+	struct ieee80211_hw *dev = priv->common.hw;
+	int ret;
 
-	err = p54_parse_firmware(dev, priv->fw);
-	if (err)
-		goto out;
+	ret = p54_parse_firmware(dev, priv->fw);
+	if (ret)
+		goto err_out;
+
+	ret = p54_find_type(priv);
+	if (ret < 0)
+		goto err_out;
 
-	if (priv->common.fw_interface != p54u_fwlist[i].intf) {
+	if (priv->common.fw_interface != p54u_fwlist[ret].intf) {
 		dev_err(&priv->udev->dev, "wrong firmware, please get "
 			"a firmware for \"%s\" and try again.\n",
-			p54u_fwlist[i].hw);
-		err = -EINVAL;
+			p54u_fwlist[ret].hw);
+		ret = -ENODEV;
+		goto err_out;
 	}
 
-out:
-	if (err)
-		release_firmware(priv->fw);
+	ret = priv->upload_fw(dev);
+	if (ret)
+		goto err_out;
 
-	return err;
+	ret = p54u_open(dev);
+	if (ret)
+		goto err_out;
+
+	ret = p54_read_eeprom(dev);
+	if (ret)
+		goto err_stop;
+
+	p54u_stop(dev);
+
+	ret = p54_register_common(dev, &priv->udev->dev);
+	if (ret)
+		goto err_stop;
+
+	return 0;
+
+err_stop:
+	p54u_stop(dev);
+
+err_out:
+	/*
+	 * p54u_disconnect will do the rest of the
+	 * cleanup
+	 */
+	return ret;
 }
 
-static int p54u_open(struct ieee80211_hw *dev)
+static void p54u_load_firmware_cb(const struct firmware *firmware,
+				  void *context)
 {
-	struct p54u_priv *priv = dev->priv;
+	struct p54u_priv *priv = context;
+	struct usb_device *udev = priv->udev;
 	int err;
 
-	err = p54u_init_urbs(dev);
-	if (err) {
-		return err;
+	complete(&priv->fw_wait_load);
+	if (firmware) {
+		priv->fw = firmware;
+		err = p54u_start_ops(priv);
+	} else {
+		err = -ENOENT;
+		dev_err(&udev->dev, "Firmware not found.\n");
 	}
 
-	priv->common.open = p54u_init_urbs;
+	if (err) {
+		struct device *parent = priv->udev->dev.parent;
 
-	return 0;
+		dev_err(&udev->dev, "failed to initialize device (%d)\n", err);
+
+		if (parent)
+			device_lock(parent);
+
+		device_release_driver(&udev->dev);
+		/*
+		 * At this point p54u_disconnect has already freed
+		 * the "priv" context. Do not use it anymore!
+		 */
+		priv = NULL;
+
+		if (parent)
+			device_unlock(parent);
+	}
+
+	usb_put_dev(udev);
 }
 
-static void p54u_stop(struct ieee80211_hw *dev)
+static int p54u_load_firmware(struct ieee80211_hw *dev,
+			      struct usb_interface *intf)
 {
-	/* TODO: figure out how to reliably stop the 3887 and net2280 so
-	   the hardware is still usable next time we want to start it.
-	   until then, we just stop listening to the hardware.. */
-	p54u_free_urbs(dev);
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct p54u_priv *priv = dev->priv;
+	struct device *device = &udev->dev;
+	int err, i;
+
+	BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist) != __NUM_P54U_HWTYPES);
+
+	init_completion(&priv->fw_wait_load);
+	i = p54_find_type(priv);
+	if (i < 0)
+		return i;
+
+	dev_info(&priv->udev->dev, "Loading firmware file %s\n",
+	       p54u_fwlist[i].fw);
+
+	usb_get_dev(udev);
+	err = request_firmware_nowait(THIS_MODULE, 1, p54u_fwlist[i].fw,
+				      device, GFP_KERNEL, priv,
+				      p54u_load_firmware_cb);
+	if (err) {
+		dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
+					  "(%d)!\n", p54u_fwlist[i].fw, err);
+	}
+
+	return err;
 }
 
 static int __devinit p54u_probe(struct usb_interface *intf,
@@ -969,33 +1053,7 @@ static int __devinit p54u_probe(struct usb_interface *intf,
 		priv->common.tx = p54u_tx_net2280;
 		priv->upload_fw = p54u_upload_firmware_net2280;
 	}
-	err = p54u_load_firmware(dev);
-	if (err)
-		goto err_free_dev;
-
-	err = priv->upload_fw(dev);
-	if (err)
-		goto err_free_fw;
-
-	p54u_open(dev);
-	err = p54_read_eeprom(dev);
-	p54u_stop(dev);
-	if (err)
-		goto err_free_fw;
-
-	err = p54_register_common(dev, &udev->dev);
-	if (err)
-		goto err_free_fw;
-
-	return 0;
-
-err_free_fw:
-	release_firmware(priv->fw);
-
-err_free_dev:
-	p54_free_common(dev);
-	usb_set_intfdata(intf, NULL);
-	usb_put_dev(udev);
+	err = p54u_load_firmware(dev, intf);
 	return err;
 }
 
@@ -1007,9 +1065,10 @@ static void __devexit p54u_disconnect(struct usb_interface *intf)
 	if (!dev)
 		return;
 
+	priv = dev->priv;
+	wait_for_completion(&priv->fw_wait_load);
 	p54_unregister_common(dev);
 
-	priv = dev->priv;
 	usb_put_dev(interface_to_usbdev(intf));
 	release_firmware(priv->fw);
 	p54_free_common(dev);
@@ -1072,7 +1131,7 @@ static struct usb_driver p54u_driver = {
 	.name	= "p54usb",
 	.id_table = p54u_table,
 	.probe = p54u_probe,
-	.disconnect = p54u_disconnect,
+	.disconnect = __devexit_p(p54u_disconnect),
 	.pre_reset = p54u_pre_reset,
 	.post_reset = p54u_post_reset,
 #ifdef CONFIG_PM