Merge branch 'topic/min' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-change

8 files changed, 1042 insertions, 199 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 67d47b59..10b1edc 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -109,6 +109,16 @@ config REGULATOR_DA9052
 	  This driver supports the voltage regulators of DA9052-BC and
 	  DA9053-AA/Bx PMIC.
 
+config REGULATOR_DA9055
+	tristate "Dialog Semiconductor DA9055 regulators"
+	depends on MFD_DA9055
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  Dialog Semiconductor DA9055 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9055-regulator.
+
 config REGULATOR_FAN53555
 	tristate "Fairchild FAN53555 Regulator"
 	depends on I2C
@@ -335,6 +345,17 @@ config REGULATOR_PALMAS
 	  on the muxing. This is handled automatically in the driver by
 	  reading the mux info from OTP.
 
+config REGULATOR_TPS51632
+	tristate "TI TPS51632 Power Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports TPS51632 voltage regulator chip.
+	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
+	  with Serial VID control and DVFS.
+	  The voltage output can be configure through I2C interface or PWM
+	  interface.
+
 config REGULATOR_TPS6105X
 	tristate "TI TPS6105X Power regulators"
 	depends on TPS6105X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index e431eed..bdaca61 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
 obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
+obj-$(CONFIG_REGULATOR_DA9055)	+= da9055-regulator.o
 obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
 obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
 obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
@@ -41,6 +42,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
+obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 1af9768..b6182e1 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -48,36 +48,21 @@ static int anatop_regmap_set_voltage_sel(struct regulator_dev *reg,
 					unsigned selector)
 {
 	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
-	u32 val, mask;
 
 	if (!anatop_reg->control_reg)
 		return -ENOTSUPP;
 
-	val = anatop_reg->min_bit_val + selector;
-	dev_dbg(&reg->dev, "%s: calculated val %d\n", __func__, val);
-	mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
-		anatop_reg->vol_bit_shift;
-	val <<= anatop_reg->vol_bit_shift;
-	regmap_update_bits(anatop_reg->anatop, anatop_reg->control_reg,
-				mask, val);
-
-	return 0;
+	return regulator_set_voltage_sel_regmap(reg, selector);
 }
 
 static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg)
 {
 	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
-	u32 val, mask;
 
 	if (!anatop_reg->control_reg)
 		return -ENOTSUPP;
 
-	regmap_read(anatop_reg->anatop, anatop_reg->control_reg, &val);
-	mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
-		anatop_reg->vol_bit_shift;
-	val = (val & mask) >> anatop_reg->vol_bit_shift;
-
-	return val - anatop_reg->min_bit_val;
+	return regulator_get_voltage_sel_regmap(reg);
 }
 
 static struct regulator_ops anatop_rops = {
@@ -158,15 +143,20 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
 		goto anatop_probe_end;
 	}
 
-	rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage)
-		/ 25000 + 1;
+	rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) / 25000 + 1
+			    + sreg->min_bit_val;
 	rdesc->min_uV = sreg->min_voltage;
 	rdesc->uV_step = 25000;
+	rdesc->linear_min_sel = sreg->min_bit_val;
+	rdesc->vsel_reg = sreg->control_reg;
+	rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) <<
+			   sreg->vol_bit_shift;
 
 	config.dev = &pdev->dev;
 	config.init_data = initdata;
 	config.driver_data = sreg;
 	config.of_node = pdev->dev.of_node;
+	config.regmap = sreg->anatop;
 
 	/* register regulator */
 	rdev = regulator_register(rdesc, &config);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 59e0863..1c8ff8c 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1919,6 +1919,10 @@ int regulator_list_voltage_linear(struct regulator_dev *rdev,
 {
 	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
+	if (selector < rdev->desc->linear_min_sel)
+		return 0;
+
+	selector -= rdev->desc->linear_min_sel;
 
 	return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
 }
@@ -2142,6 +2146,8 @@ int regulator_map_voltage_linear(struct regulator_dev *rdev,
 	if (ret < 0)
 		return ret;
 
+	ret += rdev->desc->linear_min_sel;
+
 	/* Map back into a voltage to verify we're still in bounds */
 	voltage = rdev->desc->ops->list_voltage(rdev, ret);
 	if (voltage < min_uV || voltage > max_uV)
diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c
new file mode 100644
index 0000000..2253559
--- /dev/null
+++ b/drivers/regulator/da9055-regulator.c
@@ -0,0 +1,644 @@
+/*
+* Regulator driver for DA9055 PMIC
+*
+* Copyright(c) 2012 Dialog Semiconductor Ltd.
+*
+* Author: David Dajun Chen <dchen@diasemi.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+#include <linux/mfd/da9055/pdata.h>
+
+#define DA9055_MIN_UA		0
+#define DA9055_MAX_UA		3
+
+#define DA9055_LDO_MODE_SYNC	0
+#define DA9055_LDO_MODE_SLEEP	1
+
+#define DA9055_BUCK_MODE_SLEEP	1
+#define DA9055_BUCK_MODE_SYNC	2
+#define DA9055_BUCK_MODE_AUTO	3
+
+/* DA9055 REGULATOR IDs */
+#define DA9055_ID_BUCK1	0
+#define DA9055_ID_BUCK2	1
+#define DA9055_ID_LDO1		2
+#define DA9055_ID_LDO2		3
+#define DA9055_ID_LDO3		4
+#define DA9055_ID_LDO4		5
+#define DA9055_ID_LDO5		6
+#define DA9055_ID_LDO6		7
+
+/* DA9055 BUCK current limit */
+static const int da9055_current_limits[] = { 500000, 600000, 700000, 800000 };
+
+struct da9055_conf_reg {
+	int reg;
+	int sel_mask;
+	int en_mask;
+};
+
+struct da9055_volt_reg {
+	int reg_a;
+	int reg_b;
+	int sl_shift;
+	int v_mask;
+	int v_shift;
+};
+
+struct da9055_mode_reg {
+	int reg;
+	int mask;
+	int shift;
+};
+
+struct da9055_regulator_info {
+	struct regulator_desc reg_desc;
+	struct da9055_conf_reg conf;
+	struct da9055_volt_reg volt;
+	struct da9055_mode_reg mode;
+};
+
+struct da9055_regulator {
+	struct da9055 *da9055;
+	struct da9055_regulator_info *info;
+	struct regulator_dev *rdev;
+	enum gpio_select reg_rselect;
+};
+
+static unsigned int da9055_buck_get_mode(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int ret, mode = 0;
+
+	ret = da9055_reg_read(regulator->da9055, info->mode.reg);
+	if (ret < 0)
+		return ret;
+
+	switch ((ret & info->mode.mask) >> info->mode.shift) {
+	case DA9055_BUCK_MODE_SYNC:
+		mode = REGULATOR_MODE_FAST;
+		break;
+	case DA9055_BUCK_MODE_AUTO:
+		mode = REGULATOR_MODE_NORMAL;
+		break;
+	case DA9055_BUCK_MODE_SLEEP:
+		mode = REGULATOR_MODE_STANDBY;
+		break;
+	}
+
+	return mode;
+}
+
+static int da9055_buck_set_mode(struct regulator_dev *rdev,
+					unsigned int mode)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int val = 0;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = DA9055_BUCK_MODE_SYNC << info->mode.shift;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = DA9055_BUCK_MODE_AUTO << info->mode.shift;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = DA9055_BUCK_MODE_SLEEP << info->mode.shift;
+		break;
+	}
+
+	return da9055_reg_update(regulator->da9055, info->mode.reg,
+				 info->mode.mask, val);
+}
+
+static unsigned int da9055_ldo_get_mode(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int ret;
+
+	ret = da9055_reg_read(regulator->da9055, info->volt.reg_b);
+	if (ret < 0)
+		return ret;
+
+	if (ret >> info->volt.sl_shift)
+		return REGULATOR_MODE_STANDBY;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int da9055_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	struct da9055_volt_reg volt = info->volt;
+	int val = 0;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+	case REGULATOR_MODE_FAST:
+		val = DA9055_LDO_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = DA9055_LDO_MODE_SLEEP;
+		break;
+	}
+
+	return da9055_reg_update(regulator->da9055, volt.reg_b,
+				 1 << volt.sl_shift,
+				 val << volt.sl_shift);
+}
+
+static int da9055_buck_get_current_limit(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int ret;
+
+	ret = da9055_reg_read(regulator->da9055, DA9055_REG_BUCK_LIM);
+	if (ret < 0)
+		return ret;
+
+	ret &= info->mode.mask;
+	return da9055_current_limits[ret >> info->mode.shift];
+}
+
+static int da9055_buck_set_current_limit(struct regulator_dev *rdev, int min_uA,
+					 int max_uA)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int i, val = 0;
+
+	if (min_uA > da9055_current_limits[DA9055_MAX_UA] ||
+	    max_uA < da9055_current_limits[DA9055_MIN_UA])
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(da9055_current_limits); i++) {
+		if (min_uA <= da9055_current_limits[i]) {
+			val = i;
+			break;
+		}
+	}
+
+	return da9055_reg_update(regulator->da9055, DA9055_REG_BUCK_LIM,
+				info->mode.mask, val << info->mode.shift);
+}
+
+static int da9055_regulator_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	struct da9055_volt_reg volt = info->volt;
+	int ret, sel;
+
+	/*
+	 * There are two voltage register set A & B for voltage ramping but
+	 * either one of then can be active therefore we first determine
+	 * the active register set.
+	 */
+	ret = da9055_reg_read(regulator->da9055, info->conf.reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= info->conf.sel_mask;
+
+	/* Get the voltage for the active register set A/B */
+	if (ret == DA9055_REGUALTOR_SET_A)
+		ret = da9055_reg_read(regulator->da9055, volt.reg_a);
+	else
+		ret = da9055_reg_read(regulator->da9055, volt.reg_b);
+
+	if (ret < 0)
+		return ret;
+
+	sel = (ret & volt.v_mask);
+	return sel;
+}
+
+static int da9055_regulator_set_voltage_sel(struct regulator_dev *rdev,
+					    unsigned int selector)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int ret;
+
+	/*
+	 * Regulator register set A/B is not selected through GPIO therefore
+	 * we use default register set A for voltage ramping.
+	 */
+	if (regulator->reg_rselect == NO_GPIO) {
+		/* Select register set A */
+		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
+					info->conf.sel_mask, DA9055_SEL_REG_A);
+		if (ret < 0)
+			return ret;
+
+		/* Set the voltage */
+		return da9055_reg_update(regulator->da9055, info->volt.reg_a,
+					 info->volt.v_mask, selector);
+	}
+
+	/*
+	 * Here regulator register set A/B is selected through GPIO.
+	 * Therefore we first determine the selected register set A/B and
+	 * then set the desired voltage for that register set A/B.
+	 */
+	ret = da9055_reg_read(regulator->da9055, info->conf.reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= info->conf.sel_mask;
+
+	/* Set the voltage */
+	if (ret == DA9055_REGUALTOR_SET_A)
+		return da9055_reg_update(regulator->da9055, info->volt.reg_a,
+					 info->volt.v_mask, selector);
+	else
+		return da9055_reg_update(regulator->da9055, info->volt.reg_b,
+					 info->volt.v_mask, selector);
+}
+
+static int da9055_regulator_set_suspend_voltage(struct regulator_dev *rdev,
+						int uV)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int ret;
+
+	/* Select register set B for suspend voltage ramping. */
+	if (regulator->reg_rselect == NO_GPIO) {
+		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
+					info->conf.sel_mask, DA9055_SEL_REG_B);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = regulator_map_voltage_linear(rdev, uV, uV);
+	if (ret < 0)
+		return ret;
+
+	return da9055_reg_update(regulator->da9055, info->volt.reg_b,
+				 info->volt.v_mask, ret);
+}
+
+static int da9055_suspend_enable(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+
+	/* Select register set B for voltage ramping. */
+	if (regulator->reg_rselect == NO_GPIO)
+		return da9055_reg_update(regulator->da9055, info->conf.reg,
+					info->conf.sel_mask, DA9055_SEL_REG_B);
+	else
+		return 0;
+}
+
+static int da9055_suspend_disable(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+
+	/* Diselect register set B. */
+	if (regulator->reg_rselect == NO_GPIO)
+		return da9055_reg_update(regulator->da9055, info->conf.reg,
+					info->conf.sel_mask, DA9055_SEL_REG_A);
+	else
+		return 0;
+}
+
+static struct regulator_ops da9055_buck_ops = {
+	.get_mode = da9055_buck_get_mode,
+	.set_mode = da9055_buck_set_mode,
+
+	.get_current_limit = da9055_buck_get_current_limit,
+	.set_current_limit = da9055_buck_set_current_limit,
+
+	.get_voltage_sel = da9055_regulator_get_voltage_sel,
+	.set_voltage_sel = da9055_regulator_set_voltage_sel,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+
+	.set_suspend_voltage = da9055_regulator_set_suspend_voltage,
+	.set_suspend_enable = da9055_suspend_enable,
+	.set_suspend_disable = da9055_suspend_disable,
+	.set_suspend_mode = da9055_buck_set_mode,
+};
+
+static struct regulator_ops da9055_ldo_ops = {
+	.get_mode = da9055_ldo_get_mode,
+	.set_mode = da9055_ldo_set_mode,
+
+	.get_voltage_sel = da9055_regulator_get_voltage_sel,
+	.set_voltage_sel = da9055_regulator_set_voltage_sel,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+
+	.set_suspend_voltage = da9055_regulator_set_suspend_voltage,
+	.set_suspend_enable = da9055_suspend_enable,
+	.set_suspend_disable = da9055_suspend_disable,
+	.set_suspend_mode = da9055_ldo_set_mode,
+
+};
+
+#define DA9055_LDO(_id, step, min, max, vbits, voffset) \
+{\
+	.reg_desc = {\
+		.name = #_id,\
+		.ops = &da9055_ldo_ops,\
+		.type = REGULATOR_VOLTAGE,\
+		.id = DA9055_ID_##_id,\
+		.n_voltages = (max - min) / step + 1 + (voffset), \
+		.enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
+		.enable_mask = 1, \
+		.min_uV = (min) * 1000,\
+		.uV_step = (step) * 1000,\
+		.linear_min_sel = (voffset),\
+		.owner = THIS_MODULE,\
+	},\
+	.conf = {\
+		.reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
+		.sel_mask = (1 << 4),\
+		.en_mask = 1,\
+	},\
+	.volt = {\
+		.reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
+		.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
+		.sl_shift = 7,\
+		.v_mask = (1 << (vbits)) - 1,\
+		.v_shift = (vbits),\
+	},\
+}
+
+#define DA9055_BUCK(_id, step, min, max, vbits, voffset, mbits, sbits) \
+{\
+	.reg_desc = {\
+		.name = #_id,\
+		.ops = &da9055_buck_ops,\
+		.type = REGULATOR_VOLTAGE,\
+		.id = DA9055_ID_##_id,\
+		.n_voltages = (max - min) / step + 1 + (voffset), \
+		.enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
+		.enable_mask = 1,\
+		.min_uV = (min) * 1000,\
+		.uV_step = (step) * 1000,\
+		.linear_min_sel = (voffset),\
+		.owner = THIS_MODULE,\
+	},\
+	.conf = {\
+		.reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
+		.sel_mask = (1 << 4),\
+		.en_mask = 1,\
+	},\
+	.volt = {\
+		.reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
+		.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
+		.sl_shift = 7,\
+		.v_mask = (1 << (vbits)) - 1,\
+		.v_shift = (vbits),\
+	},\
+	.mode = {\
+		.reg = DA9055_REG_BCORE_MODE,\
+		.mask = (mbits),\
+		.shift = (sbits),\
+	},\
+}
+
+static struct da9055_regulator_info da9055_regulator_info[] = {
+	DA9055_BUCK(BUCK1, 25, 725, 2075, 6, 9, 0xc, 2),
+	DA9055_BUCK(BUCK2, 25, 925, 2500, 6, 0, 3, 0),
+	DA9055_LDO(LDO1, 50, 900, 3300, 6, 2),
+	DA9055_LDO(LDO2, 50, 900, 3300, 6, 3),
+	DA9055_LDO(LDO3, 50, 900, 3300, 6, 2),
+	DA9055_LDO(LDO4, 50, 900, 3300, 6, 2),
+	DA9055_LDO(LDO5, 50, 900, 2750, 6, 2),
+	DA9055_LDO(LDO6, 20, 900, 3300, 7, 0),
+};
+
+/*
+ * Configures regulator to be controlled either through GPIO 1 or 2.
+ * GPIO can control regulator state and/or select the regulator register
+ * set A/B for voltage ramping.
+ */
+static __devinit int da9055_gpio_init(struct da9055_regulator *regulator,
+				      struct regulator_config *config,
+				      struct da9055_pdata *pdata, int id)
+{
+	struct da9055_regulator_info *info = regulator->info;
+	int ret = 0;
+
+	if (pdata->gpio_ren && pdata->gpio_ren[id]) {
+		char name[18];
+		int gpio_mux = pdata->gpio_ren[id];
+
+		config->ena_gpio = pdata->ena_gpio[id];
+		config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
+		config->ena_gpio_invert = 1;
+
+		/*
+		 * GPI pin is muxed with regulator to control the
+		 * regulator state.
+		 */
+		sprintf(name, "DA9055 GPI %d", gpio_mux);
+		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
+					    name);
+		if (ret < 0)
+			goto err;
+
+		/*
+		 * Let the regulator know that its state is controlled
+		 * through GPI.
+		 */
+		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
+					DA9055_E_GPI_MASK,
+					pdata->reg_ren[id]
+					<< DA9055_E_GPI_SHIFT);
+		if (ret < 0)
+			goto err;
+	}
+
+	if (pdata->gpio_rsel && pdata->gpio_rsel[id]) {
+		char name[18];
+		int gpio_mux = pdata->gpio_rsel[id];
+
+		regulator->reg_rselect = pdata->reg_rsel[id];
+
+		/*
+		 * GPI pin is muxed with regulator to select the
+		 * regulator register set A/B for voltage ramping.
+		 */
+		sprintf(name, "DA9055 GPI %d", gpio_mux);
+		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
+					    name);
+		if (ret < 0)
+			goto err;
+
+		/*
+		 * Let the regulator know that its register set A/B
+		 * will be selected through GPI for voltage ramping.
+		 */
+		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
+					DA9055_V_GPI_MASK,
+					pdata->reg_rsel[id]
+					<< DA9055_V_GPI_SHIFT);
+	}
+
+err:
+	return ret;
+}
+
+static irqreturn_t da9055_ldo5_6_oc_irq(int irq, void *data)
+{
+	struct da9055_regulator *regulator = data;
+
+	regulator_notifier_call_chain(regulator->rdev,
+				      REGULATOR_EVENT_OVER_CURRENT, NULL);
+
+	return IRQ_HANDLED;
+}
+
+static inline struct da9055_regulator_info *find_regulator_info(int id)
+{
+	struct da9055_regulator_info *info;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(da9055_regulator_info); i++) {
+		info = &da9055_regulator_info[i];
+		if (info->reg_desc.id == id)
+			return info;
+	}
+
+	return NULL;
+}
+
+static int __devinit da9055_regulator_probe(struct platform_device *pdev)
+{
+	struct regulator_config config = { };
+	struct da9055_regulator *regulator;
+	struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent);
+	struct da9055_pdata *pdata = da9055->dev->platform_data;
+	int ret, irq;
+
+	if (pdata == NULL || pdata->regulators[pdev->id] == NULL)
+		return -ENODEV;
+
+	regulator = devm_kzalloc(&pdev->dev, sizeof(struct da9055_regulator),
+				 GFP_KERNEL);
+	if (!regulator)
+		return -ENOMEM;
+
+	regulator->info = find_regulator_info(pdev->id);
+	if (regulator->info == NULL) {
+		dev_err(&pdev->dev, "invalid regulator ID specified\n");
+		return -EINVAL;
+	}
+
+	regulator->da9055 = da9055;
+	config.dev = &pdev->dev;
+	config.driver_data = regulator;
+	config.regmap = da9055->regmap;
+
+	if (pdata && pdata->regulators)
+		config.init_data = pdata->regulators[pdev->id];
+
+	ret = da9055_gpio_init(regulator, &config, pdata, pdev->id);
+	if (ret < 0)
+		return ret;
+
+	regulator->rdev = regulator_register(&regulator->info->reg_desc,
+					     &config);
+	if (IS_ERR(regulator->rdev)) {
+		dev_err(&pdev->dev, "Failed to register regulator %s\n",
+			regulator->info->reg_desc.name);
+		ret = PTR_ERR(regulator->rdev);
+		return ret;
+	}
+
+	/* Only LDO 5 and 6 has got the over current interrupt */
+	if (pdev->id == DA9055_ID_LDO5 || pdev->id ==  DA9055_ID_LDO6) {
+		irq = platform_get_irq_byname(pdev, "REGULATOR");
+		irq = regmap_irq_get_virq(da9055->irq_data, irq);
+		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+						da9055_ldo5_6_oc_irq,
+						IRQF_TRIGGER_HIGH |
+						IRQF_ONESHOT |
+						IRQF_PROBE_SHARED,
+						pdev->name, regulator);
+		if (ret != 0) {
+			if (ret != -EBUSY) {
+				dev_err(&pdev->dev,
+				"Failed to request Regulator IRQ %d: %d\n",
+				irq, ret);
+				goto err_regulator;
+			}
+		}
+	}
+
+	platform_set_drvdata(pdev, regulator);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(regulator->rdev);
+	return ret;
+}
+
+static int __devexit da9055_regulator_remove(struct platform_device *pdev)
+{
+	struct da9055_regulator *regulator = platform_get_drvdata(pdev);
+
+	regulator_unregister(regulator->rdev);
+
+	return 0;
+}
+
+static struct platform_driver da9055_regulator_driver = {
+	.probe = da9055_regulator_probe,
+	.remove = __devexit_p(da9055_regulator_remove),
+	.driver = {
+		.name = "da9055-regulator",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init da9055_regulator_init(void)
+{
+	return platform_driver_register(&da9055_regulator_driver);
+}
+subsys_initcall(da9055_regulator_init);
+
+static void __exit da9055_regulator_exit(void)
+{
+	platform_driver_unregister(&da9055_regulator_driver);
+}
+module_exit(da9055_regulator_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9055 PMIC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-regulator");
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 07aee69..111d76b 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -436,44 +436,14 @@ static int palmas_is_enabled_ldo(struct regulator_dev *dev)
 	return !!(reg);
 }
 
-static int palmas_list_voltage_ldo(struct regulator_dev *dev,
-					unsigned selector)
-{
-	if (!selector)
-		return 0;
-
-	/* voltage is 0.85V + (selector * 0.05v) */
-	return  850000 + (selector * 50000);
-}
-
-static int palmas_map_voltage_ldo(struct regulator_dev *rdev,
-		int min_uV, int max_uV)
-{
-	int ret, voltage;
-
-	if (min_uV == 0)
-		return 0;
-
-	if (min_uV < 900000)
-		min_uV = 900000;
-	ret = DIV_ROUND_UP(min_uV - 900000, 50000) + 1;
-
-	/* Map back into a voltage to verify we're still in bounds */
-	voltage = palmas_list_voltage_ldo(rdev, ret);
-	if (voltage < min_uV || voltage > max_uV)
-		return -EINVAL;
-
-	return ret;
-}
-
 static struct regulator_ops palmas_ops_ldo = {
 	.is_enabled		= palmas_is_enabled_ldo,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
-	.list_voltage		= palmas_list_voltage_ldo,
-	.map_voltage		= palmas_map_voltage_ldo,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
 };
 
 /*
@@ -821,6 +791,9 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 
 		pmic->desc[id].type = REGULATOR_VOLTAGE;
 		pmic->desc[id].owner = THIS_MODULE;
+		pmic->desc[id].min_uV = 900000;
+		pmic->desc[id].uV_step = 50000;
+		pmic->desc[id].linear_min_sel = 1;
 		pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
 						palmas_regs_info[id].vsel_addr);
 		pmic->desc[id].vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK;
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
index 092e5cb..769272a 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -24,12 +24,15 @@
 #include <linux/mfd/pcf50633/core.h>
 #include <linux/mfd/pcf50633/pmic.h>
 
-#define PCF50633_REGULATOR(_name, _id, _n)			\
+#define PCF50633_REGULATOR(_name, _id, _min_uV, _uV_step, _min_sel, _n) \
 	{							\
 		.name = _name,					\
 		.id = PCF50633_REGULATOR_##_id,			\
 		.ops = &pcf50633_regulator_ops,			\
 		.n_voltages = _n,				\
+		.min_uV = _min_uV,				\
+		.uV_step = _uV_step,				\
+		.linear_min_sel = _min_sel,			\
 		.type = REGULATOR_VOLTAGE,			\
 		.owner = THIS_MODULE,				\
 		.vsel_reg = PCF50633_REG_##_id##OUT,		\
@@ -38,162 +41,39 @@
 		.enable_mask = PCF50633_REGULATOR_ON,		\
 	}
 
-/* Bits from voltage value */
-static u8 auto_voltage_bits(unsigned int millivolts)
-{
-	if (millivolts < 1800)
-		return 0x2f;
-	if (millivolts > 3800)
-		return 0xff;
-
-	millivolts -= 625;
-
-	return millivolts / 25;
-}
-
-static u8 down_voltage_bits(unsigned int millivolts)
-{
-	if (millivolts < 625)
-		return 0;
-	else if (millivolts > 3000)
-		return 0xff;
-
-	millivolts -= 625;
-
-	return millivolts / 25;
-}
-
-static u8 ldo_voltage_bits(unsigned int millivolts)
-{
-	if (millivolts < 900)
-		return 0;
-	else if (millivolts > 3600)
-		return 0x1f;
-
-	millivolts -= 900;
-	return millivolts / 100;
-}
-
-/* Obtain voltage value from bits */
-static unsigned int auto_voltage_value(u8 bits)
-{
-	/* AUTOOUT: 00000000 to 00101110 are reserved.
-	 * Return 0 for bits in reserved range, which means this selector code
-	 * can't be used on this system */
-	if (bits < 0x2f)
-		return 0;
-
-	return 625 + (bits * 25);
-}
-
-
-static unsigned int down_voltage_value(u8 bits)
-{
-	return 625 + (bits * 25);
-}
-
-
-static unsigned int ldo_voltage_value(u8 bits)
-{
-	bits &= 0x1f;
-
-	return 900 + (bits * 100);
-}
-
-static int pcf50633_regulator_map_voltage(struct regulator_dev *rdev,
-					  int min_uV, int max_uV)
-{
-	struct pcf50633 *pcf;
-	int regulator_id, millivolts;
-	u8 volt_bits;
-
-	pcf = rdev_get_drvdata(rdev);
-
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= PCF50633_NUM_REGULATORS)
-		return -EINVAL;
-
-	millivolts = min_uV / 1000;
-
-	switch (regulator_id) {
-	case PCF50633_REGULATOR_AUTO:
-		volt_bits = auto_voltage_bits(millivolts);
-		break;
-	case PCF50633_REGULATOR_DOWN1:
-	case PCF50633_REGULATOR_DOWN2:
-		volt_bits = down_voltage_bits(millivolts);
-		break;
-	case PCF50633_REGULATOR_LDO1:
-	case PCF50633_REGULATOR_LDO2:
-	case PCF50633_REGULATOR_LDO3:
-	case PCF50633_REGULATOR_LDO4:
-	case PCF50633_REGULATOR_LDO5:
-	case PCF50633_REGULATOR_LDO6:
-	case PCF50633_REGULATOR_HCLDO:
-	case PCF50633_REGULATOR_MEMLDO:
-		volt_bits = ldo_voltage_bits(millivolts);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return volt_bits;
-}
-
-static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
-						unsigned int index)
-{
-	int regulator_id = rdev_get_id(rdev);
-
-	int millivolts;
-
-	switch (regulator_id) {
-	case PCF50633_REGULATOR_AUTO:
-		millivolts = auto_voltage_value(index);
-		break;
-	case PCF50633_REGULATOR_DOWN1:
-	case PCF50633_REGULATOR_DOWN2:
-		millivolts = down_voltage_value(index);
-		break;
-	case PCF50633_REGULATOR_LDO1:
-	case PCF50633_REGULATOR_LDO2:
-	case PCF50633_REGULATOR_LDO3:
-	case PCF50633_REGULATOR_LDO4:
-	case PCF50633_REGULATOR_LDO5:
-	case PCF50633_REGULATOR_LDO6:
-	case PCF50633_REGULATOR_HCLDO:
-	case PCF50633_REGULATOR_MEMLDO:
-		millivolts = ldo_voltage_value(index);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return millivolts * 1000;
-}
-
 static struct regulator_ops pcf50633_regulator_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.list_voltage = pcf50633_regulator_list_voltage,
-	.map_voltage = pcf50633_regulator_map_voltage,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 };
 
 static const struct regulator_desc regulators[] = {
-	[PCF50633_REGULATOR_AUTO] = PCF50633_REGULATOR("auto", AUTO, 128),
-	[PCF50633_REGULATOR_DOWN1] = PCF50633_REGULATOR("down1", DOWN1, 96),
-	[PCF50633_REGULATOR_DOWN2] = PCF50633_REGULATOR("down2", DOWN2, 96),
-	[PCF50633_REGULATOR_LDO1] = PCF50633_REGULATOR("ldo1", LDO1, 28),
-	[PCF50633_REGULATOR_LDO2] = PCF50633_REGULATOR("ldo2", LDO2, 28),
-	[PCF50633_REGULATOR_LDO3] = PCF50633_REGULATOR("ldo3", LDO3, 28),
-	[PCF50633_REGULATOR_LDO4] = PCF50633_REGULATOR("ldo4", LDO4, 28),
-	[PCF50633_REGULATOR_LDO5] = PCF50633_REGULATOR("ldo5", LDO5, 28),
-	[PCF50633_REGULATOR_LDO6] = PCF50633_REGULATOR("ldo6", LDO6, 28),
-	[PCF50633_REGULATOR_HCLDO] = PCF50633_REGULATOR("hcldo", HCLDO, 28),
-	[PCF50633_REGULATOR_MEMLDO] = PCF50633_REGULATOR("memldo", MEMLDO, 28),
+	[PCF50633_REGULATOR_AUTO] =
+		PCF50633_REGULATOR("auto", AUTO, 1800000, 25000, 0x2f, 128),
+	[PCF50633_REGULATOR_DOWN1] =
+		PCF50633_REGULATOR("down1", DOWN1, 625000, 25000, 0, 96),
+	[PCF50633_REGULATOR_DOWN2] =
+		PCF50633_REGULATOR("down2", DOWN2, 625000, 25000, 0, 96),
+	[PCF50633_REGULATOR_LDO1] =
+		PCF50633_REGULATOR("ldo1", LDO1, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_LDO2] =
+		PCF50633_REGULATOR("ldo2", LDO2, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_LDO3] =
+		PCF50633_REGULATOR("ldo3", LDO3, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_LDO4] =
+		PCF50633_REGULATOR("ldo4", LDO4, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_LDO5] =
+		PCF50633_REGULATOR("ldo5", LDO5, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_LDO6] =
+		PCF50633_REGULATOR("ldo6", LDO6, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_HCLDO] =
+		PCF50633_REGULATOR("hcldo", HCLDO, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_MEMLDO] =
+		PCF50633_REGULATOR("memldo", MEMLDO, 900000, 100000, 0, 28),
 };
 
 static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c
new file mode 100644
index 0000000..7c4e8a6
--- /dev/null
+++ b/drivers/regulator/tps51632-regulator.c
@@ -0,0 +1,327 @@
+/*
+ * tps51632-regulator.c -- TI TPS51632
+ *
+ * Regulator driver for TPS51632 3-2-1 Phase D-Cap Step Down Driverless
+ * Controller with serial VID control and DVFS.
+ *
+ * Copyright (c) 2012, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/tps51632-regulator.h>
+#include <linux/slab.h>
+
+/* Register definitions */
+#define TPS51632_VOLTAGE_SELECT_REG		0x0
+#define TPS51632_VOLTAGE_BASE_REG		0x1
+#define TPS51632_OFFSET_REG			0x2
+#define TPS51632_IMON_REG			0x3
+#define TPS51632_VMAX_REG			0x4
+#define TPS51632_DVFS_CONTROL_REG		0x5
+#define TPS51632_POWER_STATE_REG		0x6
+#define TPS51632_SLEW_REGS			0x7
+#define TPS51632_FAULT_REG			0x14
+
+#define TPS51632_MAX_REG			0x15
+
+#define TPS51632_VOUT_MASK			0x7F
+#define TPS51632_VOUT_OFFSET_MASK		0x1F
+#define TPS51632_VMAX_MASK			0x7F
+#define TPS51632_VMAX_LOCK			0x80
+
+/* TPS51632_DVFS_CONTROL_REG */
+#define TPS51632_DVFS_PWMEN			0x1
+#define TPS51632_DVFS_STEP_20			0x2
+#define TPS51632_DVFS_VMAX_PG			0x4
+#define TPS51632_DVFS_PWMRST			0x8
+#define TPS51632_DVFS_OCA_EN			0x10
+#define TPS51632_DVFS_FCCM			0x20
+
+/* TPS51632_POWER_STATE_REG */
+#define TPS51632_POWER_STATE_MASK		0x03
+#define TPS51632_POWER_STATE_MULTI_PHASE_CCM	0x0
+#define TPS51632_POWER_STATE_SINGLE_PHASE_CCM	0x1
+#define TPS51632_POWER_STATE_SINGLE_PHASE_DCM	0x2
+
+#define TPS51632_MIN_VOLATGE			500000
+#define TPS51632_MAX_VOLATGE			1520000
+#define TPS51632_VOLATGE_STEP_10mV		10000
+#define TPS51632_VOLATGE_STEP_20mV		20000
+#define TPS51632_MAX_VSEL			0x7F
+#define TPS51632_MIN_VSEL			0x19
+#define TPS51632_DEFAULT_RAMP_DELAY		6000
+#define TPS51632_VOLT_VSEL(uV)					\
+		(DIV_ROUND_UP(uV - TPS51632_MIN_VOLATGE,	\
+			TPS51632_VOLATGE_STEP_10mV) +		\
+			TPS51632_MIN_VSEL)
+
+/* TPS51632 chip information */
+struct tps51632_chip {
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	bool enable_pwm_dvfs;
+};
+
+static int tps51632_dcdc_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct tps51632_chip *tps = rdev_get_drvdata(rdev);
+	unsigned int data;
+	int ret;
+	unsigned int reg = TPS51632_VOLTAGE_SELECT_REG;
+	int vsel;
+
+	if (tps->enable_pwm_dvfs)
+		reg = TPS51632_VOLTAGE_BASE_REG;
+
+	ret = regmap_read(tps->regmap, reg, &data);
+	if (ret < 0) {
+		dev_err(tps->dev, "reg read failed, err %d\n", ret);
+		return ret;
+	}
+
+	vsel = data & TPS51632_VOUT_MASK;
+	return vsel;
+}
+
+static int tps51632_dcdc_set_voltage_sel(struct regulator_dev *rdev,
+		unsigned selector)
+{
+	struct tps51632_chip *tps = rdev_get_drvdata(rdev);
+	int ret;
+	unsigned int reg = TPS51632_VOLTAGE_SELECT_REG;
+
+	if (tps->enable_pwm_dvfs)
+		reg = TPS51632_VOLTAGE_BASE_REG;
+
+	if (selector > TPS51632_MAX_VSEL)
+		return -EINVAL;
+
+	ret = regmap_write(tps->regmap, reg, selector);
+	if (ret < 0)
+		dev_err(tps->dev, "reg write failed, err %d\n", ret);
+	return ret;
+}
+
+static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev,
+		int ramp_delay)
+{
+	struct tps51632_chip *tps = rdev_get_drvdata(rdev);
+	int bit = ramp_delay/6000;
+	int ret;
+
+	if (bit)
+		bit--;
+	ret = regmap_write(tps->regmap, TPS51632_SLEW_REGS, BIT(bit));
+	if (ret < 0)
+		dev_err(tps->dev, "SLEW reg write failed, err %d\n", ret);
+	return ret;
+}
+
+static struct regulator_ops tps51632_dcdc_ops = {
+	.get_voltage_sel	= tps51632_dcdc_get_voltage_sel,
+	.set_voltage_sel	= tps51632_dcdc_set_voltage_sel,
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_ramp_delay		= tps51632_dcdc_set_ramp_delay,
+};
+
+static int __devinit tps51632_init_dcdc(struct tps51632_chip *tps,
+		struct tps51632_regulator_platform_data *pdata)
+{
+	int ret;
+	uint8_t	control = 0;
+	int vsel;
+
+	if (!pdata->enable_pwm_dvfs)
+		goto skip_pwm_config;
+
+	control |= TPS51632_DVFS_PWMEN;
+	tps->enable_pwm_dvfs = pdata->enable_pwm_dvfs;
+	vsel = TPS51632_VOLT_VSEL(pdata->base_voltage_uV);
+	ret = regmap_write(tps->regmap, TPS51632_VOLTAGE_BASE_REG, vsel);
+	if (ret < 0) {
+		dev_err(tps->dev, "BASE reg write failed, err %d\n", ret);
+		return ret;
+	}
+
+	if (pdata->dvfs_step_20mV)
+		control |= TPS51632_DVFS_STEP_20;
+
+	if (pdata->max_voltage_uV) {
+		unsigned int vmax;
+		/**
+		 * TPS51632 hw behavior: VMAX register can be write only
+		 * once as it get locked after first write. The lock get
+		 * reset only when device is power-reset.
+		 * Write register only when lock bit is not enabled.
+		 */
+		ret = regmap_read(tps->regmap, TPS51632_VMAX_REG, &vmax);
+		if (ret < 0) {
+			dev_err(tps->dev, "VMAX read failed, err %d\n", ret);
+			return ret;
+		}
+		if (!(vmax & TPS51632_VMAX_LOCK)) {
+			vsel = TPS51632_VOLT_VSEL(pdata->max_voltage_uV);
+			ret = regmap_write(tps->regmap, TPS51632_VMAX_REG,
+					vsel);
+			if (ret < 0) {
+				dev_err(tps->dev,
+					"VMAX write failed, err %d\n", ret);
+				return ret;
+			}
+		}
+	}
+
+skip_pwm_config:
+	ret = regmap_write(tps->regmap, TPS51632_DVFS_CONTROL_REG, control);
+	if (ret < 0)
+		dev_err(tps->dev, "DVFS reg write failed, err %d\n", ret);
+	return ret;
+}
+
+static bool rd_wr_reg(struct device *dev, unsigned int reg)
+{
+	if ((reg >= 0x8) && (reg <= 0x10))
+		return false;
+	return true;
+}
+
+static const struct regmap_config tps51632_regmap_config = {
+	.reg_bits		= 8,
+	.val_bits		= 8,
+	.writeable_reg		= rd_wr_reg,
+	.readable_reg		= rd_wr_reg,
+	.max_register		= TPS51632_MAX_REG - 1,
+	.cache_type		= REGCACHE_RBTREE,
+};
+
+static int __devinit tps51632_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct tps51632_regulator_platform_data *pdata;
+	struct regulator_dev *rdev;
+	struct tps51632_chip *tps;
+	int ret;
+	struct regulator_config config = { };
+
+	pdata = client->dev.platform_data;
+	if (!pdata) {
+		dev_err(&client->dev, "No Platform data\n");
+		return -EINVAL;
+	}
+
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps) {
+		dev_err(&client->dev, "Memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	tps->dev = &client->dev;
+	tps->desc.name = id->name;
+	tps->desc.id = 0;
+	tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
+	tps->desc.min_uV = TPS51632_MIN_VOLATGE;
+	tps->desc.uV_step = TPS51632_VOLATGE_STEP_10mV;
+	tps->desc.linear_min_sel = TPS51632_MIN_VSEL;
+	tps->desc.n_voltages = TPS51632_MAX_VSEL + 1;
+	tps->desc.ops = &tps51632_dcdc_ops;
+	tps->desc.type = REGULATOR_VOLTAGE;
+	tps->desc.owner = THIS_MODULE;
+
+	tps->regmap = devm_regmap_init_i2c(client, &tps51632_regmap_config);
+	if (IS_ERR(tps->regmap)) {
+		ret = PTR_ERR(tps->regmap);
+		dev_err(&client->dev, "regmap init failed, err %d\n", ret);
+		return ret;
+	}
+	i2c_set_clientdata(client, tps);
+
+	ret = tps51632_init_dcdc(tps, pdata);
+	if (ret < 0) {
+		dev_err(tps->dev, "Init failed, err = %d\n", ret);
+		return ret;
+	}
+
+	/* Register the regulators */
+	config.dev = &client->dev;
+	config.init_data = pdata->reg_init_data;
+	config.driver_data = tps;
+	config.regmap = tps->regmap;
+	config.of_node = client->dev.of_node;
+
+	rdev = regulator_register(&tps->desc, &config);
+	if (IS_ERR(rdev)) {
+		dev_err(tps->dev, "regulator register failed\n");
+		return PTR_ERR(rdev);
+	}
+
+	tps->rdev = rdev;
+	return 0;
+}
+
+static int __devexit tps51632_remove(struct i2c_client *client)
+{
+	struct tps51632_chip *tps = i2c_get_clientdata(client);
+
+	regulator_unregister(tps->rdev);
+	return 0;
+}
+
+static const struct i2c_device_id tps51632_id[] = {
+	{.name = "tps51632",},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, tps51632_id);
+
+static struct i2c_driver tps51632_i2c_driver = {
+	.driver = {
+		.name = "tps51632",
+		.owner = THIS_MODULE,
+	},
+	.probe = tps51632_probe,
+	.remove = __devexit_p(tps51632_remove),
+	.id_table = tps51632_id,
+};
+
+static int __init tps51632_init(void)
+{
+	return i2c_add_driver(&tps51632_i2c_driver);
+}
+subsys_initcall(tps51632_init);
+
+static void __exit tps51632_cleanup(void)
+{
+	i2c_del_driver(&tps51632_i2c_driver);
+}
+module_exit(tps51632_cleanup);
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("TPS51632 voltage regulator driver");
+MODULE_LICENSE("GPL v2");