Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 377 insertions, 0 deletions

diff --git a/drivers/scsi/NCR_Q720.c b/drivers/scsi/NCR_Q720.c
new file mode 100644
index 0000000..9d18ec9
--- /dev/null
+++ b/drivers/scsi/NCR_Q720.c
@@ -0,0 +1,377 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* NCR Quad 720 MCA SCSI Driver
+ *
+ * Copyright (C) 2003 by James.Bottomley@HansenPartnership.com
+ */
+
+#include <linux/blkdev.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mca.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+
+#include "ncr53c8xx.h"
+
+#include "NCR_Q720.h"
+
+static struct ncr_chip q720_chip __initdata = {
+	.revision_id =	0x0f,
+	.burst_max =	3,
+	.offset_max =	8,
+	.nr_divisor =	4,
+	.features =	FE_WIDE | FE_DIFF | FE_VARCLK,
+};
+
+MODULE_AUTHOR("James Bottomley");
+MODULE_DESCRIPTION("NCR Quad 720 SCSI Driver");
+MODULE_LICENSE("GPL");
+
+#define NCR_Q720_VERSION		"0.9"
+
+/* We needs this helper because we have up to four hosts per struct device */
+struct NCR_Q720_private {
+	struct device		*dev;
+	void __iomem *		mem_base;
+	__u32			phys_mem_base;
+	__u32			mem_size;
+	__u8			irq;
+	__u8			siops;
+	__u8			irq_enable;
+	struct Scsi_Host	*hosts[4];
+};
+
+static struct scsi_host_template NCR_Q720_tpnt = {
+	.module			= THIS_MODULE,
+	.proc_name		= "NCR_Q720",
+};
+
+static irqreturn_t
+NCR_Q720_intr(int irq, void *data, struct pt_regs * regs)
+{
+	struct NCR_Q720_private *p = (struct NCR_Q720_private *)data;
+	__u8 sir = (readb(p->mem_base + 0x0d) & 0xf0) >> 4;
+	__u8 siop;
+
+	sir |= ~p->irq_enable;
+
+	if(sir == 0xff)
+		return IRQ_NONE;
+
+
+	while((siop = ffz(sir)) < p->siops) {
+		sir |= 1<<siop;
+		ncr53c8xx_intr(irq, p->hosts[siop], regs);
+	}
+	return IRQ_HANDLED;
+}
+
+static int __init
+NCR_Q720_probe_one(struct NCR_Q720_private *p, int siop,
+		int irq, int slot, __u32 paddr, void __iomem *vaddr)
+{
+	struct ncr_device device;
+	__u8 scsi_id;
+	static int unit = 0;
+	__u8 scsr1 = readb(vaddr + NCR_Q720_SCSR_OFFSET + 1);
+	__u8 differential = readb(vaddr + NCR_Q720_SCSR_OFFSET) & 0x20;
+	__u8 version;
+	int error;
+
+	scsi_id = scsr1 >> 4;
+	/* enable burst length 16 (FIXME: should allow this) */
+	scsr1 |= 0x02;
+	/* force a siop reset */
+	scsr1 |= 0x04;
+	writeb(scsr1, vaddr + NCR_Q720_SCSR_OFFSET + 1);
+	udelay(10);
+	version = readb(vaddr + 0x18) >> 4;
+
+	memset(&device, 0, sizeof(struct ncr_device));
+		/* Initialise ncr_device structure with items required by ncr_attach. */
+	device.chip		= q720_chip;
+	device.chip.revision_id	= version;
+	device.host_id		= scsi_id;
+	device.dev		= p->dev;
+	device.slot.base	= paddr;
+	device.slot.base_c	= paddr;
+	device.slot.base_v	= vaddr;
+	device.slot.irq		= irq;
+	device.differential	= differential ? 2 : 0;
+	printk("Q720 probe unit %d (siop%d) at 0x%lx, diff = %d, vers = %d\n", unit, siop,
+	       (unsigned long)paddr, differential, version);
+
+	p->hosts[siop] = ncr_attach(&NCR_Q720_tpnt, unit++, &device);
+	
+	if (!p->hosts[siop]) 
+		goto fail;
+
+	p->irq_enable |= (1<<siop);
+	scsr1 = readb(vaddr + NCR_Q720_SCSR_OFFSET + 1);
+	/* clear the disable interrupt bit */
+	scsr1 &= ~0x01;
+	writeb(scsr1, vaddr + NCR_Q720_SCSR_OFFSET + 1);
+
+	error = scsi_add_host(p->hosts[siop], p->dev);
+	if (error)
+		ncr53c8xx_release(p->hosts[siop]);
+	else
+		scsi_scan_host(p->hosts[siop]);
+	return error;
+
+ fail:
+	return -ENODEV;
+}
+
+/* Detect a Q720 card.  Note, because of the setup --- the chips are
+ * essentially connectecd to the MCA bus independently, it is easier
+ * to set them up as two separate host adapters, rather than one
+ * adapter with two channels */
+static int __init
+NCR_Q720_probe(struct device *dev)
+{
+	struct NCR_Q720_private *p;
+	static int banner = 1;
+	struct mca_device *mca_dev = to_mca_device(dev);
+	int slot = mca_dev->slot;
+	int found = 0;
+	int irq, i, siops;
+	__u8 pos2, pos4, asr2, asr9, asr10;
+	__u16 io_base;
+	__u32 base_addr, mem_size;
+	void __iomem *mem_base;
+
+	p = kmalloc(sizeof(*p), GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	memset(p, 0, sizeof(*p));
+	pos2 = mca_device_read_pos(mca_dev, 2);
+	/* enable device */
+	pos2 |=  NCR_Q720_POS2_BOARD_ENABLE | NCR_Q720_POS2_INTERRUPT_ENABLE;
+	mca_device_write_pos(mca_dev, 2, pos2);
+
+	io_base = (pos2 & NCR_Q720_POS2_IO_MASK) << NCR_Q720_POS2_IO_SHIFT;
+
+
+	if(banner) {
+		printk(KERN_NOTICE "NCR Q720: Driver Version " NCR_Q720_VERSION "\n"
+		       "NCR Q720:  Copyright (c) 2003 by James.Bottomley@HansenPartnership.com\n"
+		       "NCR Q720:\n");
+		banner = 0;
+	}
+	io_base = mca_device_transform_ioport(mca_dev, io_base);
+
+	/* OK, this is phase one of the bootstrap, we now know the
+	 * I/O space base address.  All the configuration registers
+	 * are mapped here (including pos) */
+
+	/* sanity check I/O mapping */
+	i = inb(io_base) | (inb(io_base+1)<<8);
+	if(i != NCR_Q720_MCA_ID) {
+		printk(KERN_ERR "NCR_Q720, adapter failed to I/O map registers correctly at 0x%x(0x%x)\n", io_base, i);
+		kfree(p);
+		return -ENODEV;
+	}
+
+	/* Phase II, find the ram base and memory map the board register */
+	pos4 = inb(io_base + 4);
+	/* enable streaming data */
+	pos4 |= 0x01;
+	outb(pos4, io_base + 4);
+	base_addr = (pos4 & 0x7e) << 20;
+	base_addr += (pos4 & 0x80) << 23;
+	asr10 = inb(io_base + 0x12);
+	base_addr += (asr10 & 0x80) << 24;
+	base_addr += (asr10 & 0x70) << 23;
+
+	/* OK, got the base addr, now we need to find the ram size,
+	 * enable and map it */
+	asr9 = inb(io_base + 0x11);
+	i = (asr9 & 0xc0) >> 6;
+	if(i == 0)
+		mem_size = 1024;
+	else
+		mem_size = 1 << (19 + i);
+
+	/* enable the sram mapping */
+	asr9 |= 0x20;
+
+	/* disable the rom mapping */
+	asr9 &= ~0x10;
+
+	outb(asr9, io_base + 0x11);
+
+	if(!request_mem_region(base_addr, mem_size, "NCR_Q720")) {
+		printk(KERN_ERR "NCR_Q720: Failed to claim memory region 0x%lx\n-0x%lx",
+		       (unsigned long)base_addr,
+		       (unsigned long)(base_addr + mem_size));
+		goto out_free;
+	}
+	
+	if (dma_declare_coherent_memory(dev, base_addr, base_addr,
+					mem_size, DMA_MEMORY_MAP)
+	    != DMA_MEMORY_MAP) {
+		printk(KERN_ERR "NCR_Q720: DMA declare memory failed\n");
+		goto out_release_region;
+	}
+
+	/* The first 1k of the memory buffer is a memory map of the registers
+	 */
+	mem_base = dma_mark_declared_memory_occupied(dev, base_addr,
+							    1024);
+	if (IS_ERR(mem_base)) {
+		printk("NCR_Q720 failed to reserve memory mapped region\n");
+		goto out_release;
+	}
+
+	/* now also enable accesses in asr 2 */
+	asr2 = inb(io_base + 0x0a);
+
+	asr2 |= 0x01;
+
+	outb(asr2, io_base + 0x0a);
+
+	/* get the number of SIOPs (this should be 2 or 4) */
+	siops = ((asr2 & 0xe0) >> 5) + 1;
+
+	/* sanity check mapping (again) */
+	i = readw(mem_base);
+	if(i != NCR_Q720_MCA_ID) {
+		printk(KERN_ERR "NCR_Q720, adapter failed to memory map registers correctly at 0x%lx(0x%x)\n", (unsigned long)base_addr, i);
+		goto out_release;
+	}
+
+	irq = readb(mem_base + 5) & 0x0f;
+	
+	
+	/* now do the bus related transforms */
+	irq = mca_device_transform_irq(mca_dev, irq);
+
+	printk(KERN_NOTICE "NCR Q720: found in slot %d  irq = %d  mem base = 0x%lx siops = %d\n", slot, irq, (unsigned long)base_addr, siops);
+	printk(KERN_NOTICE "NCR Q720: On board ram %dk\n", mem_size/1024);
+
+	p->dev = dev;
+	p->mem_base = mem_base;
+	p->phys_mem_base = base_addr;
+	p->mem_size = mem_size;
+	p->irq = irq;
+	p->siops = siops;
+
+	if (request_irq(irq, NCR_Q720_intr, SA_SHIRQ, "NCR_Q720", p)) {
+		printk(KERN_ERR "NCR_Q720: request irq %d failed\n", irq);
+		goto out_release;
+	}
+	/* disable all the siop interrupts */
+	for(i = 0; i < siops; i++) {
+		void __iomem *reg_scsr1 = mem_base + NCR_Q720_CHIP_REGISTER_OFFSET
+			+ i*NCR_Q720_SIOP_SHIFT + NCR_Q720_SCSR_OFFSET + 1;
+		__u8 scsr1 = readb(reg_scsr1);
+		scsr1 |= 0x01;
+		writeb(scsr1, reg_scsr1);
+	}
+
+	/* plumb in all 720 chips */
+	for (i = 0; i < siops; i++) {
+		void __iomem *siop_v_base = mem_base + NCR_Q720_CHIP_REGISTER_OFFSET
+			+ i*NCR_Q720_SIOP_SHIFT;
+		__u32 siop_p_base = base_addr + NCR_Q720_CHIP_REGISTER_OFFSET
+			+ i*NCR_Q720_SIOP_SHIFT;
+		__u16 port = io_base + NCR_Q720_CHIP_REGISTER_OFFSET
+			+ i*NCR_Q720_SIOP_SHIFT;
+		int err;
+
+		outb(0xff, port + 0x40);
+		outb(0x07, port + 0x41);
+		if ((err = NCR_Q720_probe_one(p, i, irq, slot,
+					      siop_p_base, siop_v_base)) != 0)
+			printk("Q720: SIOP%d: probe failed, error = %d\n",
+			       i, err);
+		else
+			found++;
+	}
+
+	if (!found) {
+		kfree(p);
+		return -ENODEV;
+	}
+
+	mca_device_set_claim(mca_dev, 1);
+	mca_device_set_name(mca_dev, "NCR_Q720");
+	dev_set_drvdata(dev, p);
+
+	return 0;
+
+ out_release:
+	dma_release_declared_memory(dev);
+ out_release_region:
+	release_mem_region(base_addr, mem_size);
+ out_free:
+	kfree(p);
+
+	return -ENODEV;
+}
+
+static void __exit
+NCR_Q720_remove_one(struct Scsi_Host *host)
+{
+	scsi_remove_host(host);
+	ncr53c8xx_release(host);
+}
+
+static int __exit
+NCR_Q720_remove(struct device *dev)
+{
+	struct NCR_Q720_private *p = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < p->siops; i++)
+		if(p->hosts[i])
+			NCR_Q720_remove_one(p->hosts[i]);
+
+	dma_release_declared_memory(dev);
+	release_mem_region(p->phys_mem_base, p->mem_size);
+	free_irq(p->irq, p);
+	kfree(p);
+	return 0;
+}
+
+static short NCR_Q720_id_table[] = { NCR_Q720_MCA_ID, 0 };
+
+static struct mca_driver NCR_Q720_driver = {
+	.id_table = NCR_Q720_id_table,
+	.driver = {
+		.name		= "NCR_Q720",
+		.bus		= &mca_bus_type,
+		.probe		= NCR_Q720_probe,
+		.remove		= __devexit_p(NCR_Q720_remove),
+	},
+};
+
+static int __init
+NCR_Q720_init(void)
+{
+	int ret = ncr53c8xx_init();
+	if (!ret)
+		ret = mca_register_driver(&NCR_Q720_driver);
+	if (ret)
+		ncr53c8xx_exit();
+	return ret;
+}
+
+static void __exit
+NCR_Q720_exit(void)
+{
+	mca_unregister_driver(&NCR_Q720_driver);
+	ncr53c8xx_exit();
+}
+
+module_init(NCR_Q720_init);
+module_exit(NCR_Q720_exit);